Yu Watanabe [Tue, 5 Dec 2017 05:04:12 +0000 (14:04 +0900)]
execute: define setup_smack() only if SMACK is enabled
This suppresses the following warning
```
execute.c:2149:12: warning: ‘setup_smack’ defined but not used [-Wunused-function]
static int setup_smack(
^~~~~~~~~~~
```
util-lib,tests: rework unbase64 so that we skip over whitespace automatically (#7522)
Let's optimize things a bit, and instead of having to strip whitespace
first before decoding base64, let's do that implicitly while doing so.
Given that base64 was designed the way it was designed specifically to
be tolerant to whitespace changes, it's a good idea to do this
automatically and implicitly.
Ikey Doherty [Sun, 3 Dec 2017 12:28:23 +0000 (12:28 +0000)]
sysusers: Provide meson argument to set gid for 'users' group (#7533)
To allow better integration with distributions requiring an explicitly
set gid for the `users` group, provide the new `-Dusers-gid` option to
set to a new numeric value.
In the absence of a specified gid, we'll fallback to the default existing
behaviour of `-` as the gid value, to automatically assign the next available
gid on the system.
mount-util: do not use the official MAX_HANDLE_SZ (#7523)
If we'd use the system header's version of MAX_HANDLE_SZ then our code
would break on older kernels as soon as the value is increased, as old
kernels refuse larger buffers with EINVAL.
Yu Watanabe [Thu, 30 Nov 2017 16:27:53 +0000 (01:27 +0900)]
mount: do not require that the specified directory exists
If the specified direcotry does not exist, then systemd creates it
when the mount unit starts. So, it is not necessary to check the
existence in the client tool.
Yu Watanabe [Thu, 30 Nov 2017 08:55:04 +0000 (17:55 +0900)]
mount: ignore error when stop non-existing automount unit
The command `systemd-mount -u` tries to stop both mount and automount
units. If the corresponding mount unit does not exist, then it is
user's fault, that is, the specified path is not a mount point.
However, not all mount units have corresponding autmount units.
Thus, the error about non-existing automount unit is not user's falut,
and showing the error may confuse users.
So, let's ignore the error of such case.
units: use SuccessExitStatus to ignore syntax errors in tmpfiles
This makes sense from the point of view of the whole distribution:
if there are some specific files that have syntax problems, or unknown
users or groups, or use unsupported features, failing the whole service
is not useful.
In particular, services with tmpfiles --boot should not be started after boot.
The premise of --boot is that there are actions which are only safe to do once
during boot, because the state evolves later through other means and re-running
the boot-time setup would destroy it. If services with --boot fail in the
initial transaction, they would be re-run later on when a unit which
(indirectly) depends on them is started, causing problems.
(If we had a mode where a service would at most run once, and would not be
started in subsequent transactions, that'd be a good additional safeguard.
Using ExecStart=-... is a bit like that, but it causes all failure to be
ignored, which is too big of a hammer.)
tmpfiles: add a special return code for syntax failures
In this way, individual errors in files can be treated differently than a
failure of the whole service.
A test is added to check that the expected value is returned.
Some parts are commented out, because it is not. This will be fixed in
a subsequent commit.
This fixes various typos, removes some duplications, and adds a bit more
detail in the few places which are potential pitfalls for users.
Also change the way the paragraphs about new options begin, because having
a paragraph saying "Two new options have been added", and then bit lower
again "Two new options have been added" is confusing.
mount-util: tape over name_to_handle_at() flakiness (#7517)
Apparently, the kernel returns EINVAL on NFS4 sometimes, even if we do
everything right, let's fallback in that case and find a different
approach to determine if something's a mount point.
systemctl: don't use get_process_comm() on non-local PIDs (#7518)
Let's not use local process data for remote processes, that can only
show nonsense.
Maybe one day we should add a bus API to query the comm field of a
process remotely, but for now, let's not bother, the information is
redundant anyway, as the cgroup data shows it too (and the cgroup tree
is show as part of status as well, and is requested from remote through
dbus, without local kernel calls).
util-lib: handle empty string in last_path_component
Now the function returns an empty string when given an empty string.
Not sure if this is the best option (maybe this should be an error?),
but at least the behaviour is well defined.
dissect-image: return error if results are ambiguous
We let the caller make the decision. Existing callers are OK with treating an
ambiguous result the same as no content, but makefs and growfs should refuse such
partitions.
I opted to completely generate a unit for both mount points and swaps. For
swaps, it would be possible to use fixed template unit like systemd-mkswap@.service,
because there's no information passed except the device name. For mount points,
that's not possible because both the device name and file system type need to
be passed. Nevertheless, I expect that options will need to passed to both mkfs
and mkswap, in which case it'll be necessary to create units of both types
anyway.
Also do not include libcryptsetup.h directly, but only through crypt-util.h.
This way we do not have to repeat the define in every file where it is used.
util-lib: use trailing slash in chase_symlinks, fd_is_mount_point, path_is_mount_point
The kernel will reply with -ENOTDIR when we try to access a non-directory under
a name which ends with a slash. But our functions would strip the trailing slash
under various circumstances. Keep the trailing slash, so that
path_is_mount_point("/path/to/file/") return -ENOTDIR when /path/to/file/ is a file.
Tests are added for this change in behaviour.
Also, when called with a trailing slash, path_is_mount_point() would get
"" from basename(), and call name_to_handle_at(3, "", ...), and always
return -ENOENT. Now it'll return -ENOTDIR if the mount point is a file, and
true if it is a directory and a mount point.
v2:
- use strip_trailing_chars()
v3:
- instead of stripping trailing chars(), do the opposite — preserve them.
Add a "RequiredForOnline=" Link attribute for .network files (#7347)
RequiredForOnline= denotes a link/network that does/does not require being up
for systemd-networkd-wait-online to consider the system online; this makes it
possible to ignore devices without modifying parameters to wait-online.
Fix SELinux labels in cgroup filesystem root directory (#7496)
When using SELinux with legacy cgroups the tmpfs on /sys/fs/cgroup is by
default labelled as tmpfs_t. This label is also inherited by the "cpu"
and "cpuacct" symbolic links. Unfortunately the policy expects them to
be labelled as cgroup_t, which is used for all the actual cgroup
filesystems. Failure to do so results in a stream of denials.
This state cannot be fixed reliably when the cgroup filesystem structure
is set-up as the SELinux policy is not yet loaded at this
moment. It also cannot be fixed later as the root of the cgroup
filesystem is remounted read-only. In order to fix it the root of the
cgroup filesystem needs to be temporary remounted read-write, relabelled
and remounted back read-only.
core: support upgrading from DynamicUser=0 to DynamicUser=1 for unit directories (#7507)
This makes sure we migrate /var/lib/<foo> if it exists to
/var/lib/private/<foo> if DynamicUser=1 is set. This is useful to allow
turning on DynamicUser= on services that previously didn't use it, and
we can deal with this, and migrate the relevant directories as
necessary.
Note that "downgrading" from DynamicUser=1 backto DynamicUser=0 works
too. However in that case we simply continue to use
/var/lib/private/<foo>, which works because /var/lib/<foo> is a symlink
there after all.
run: rearrange error handling when adding unit properties
Let's always leave logging to the call that actually added the fields to
the bus message. This way we don't get duplicate logging whenver
bus_append_unit_property_assignment() ends up being called, which does
all its logging on its own (and probably should do, as it can output
much more precise errors).
documentation: add document listing all unit file settings also supported for transient units
Unfortunately, there are far too many properties currently not
accessible to transient units. The first step to opening them all up is
to figure out which ones they are.
core: never remove "transient" and "control" directories from unit search path
This changes the unit search path logic to never drop the transient and
control directories from the unit search path. This is necessary as we
add new entries to both during runtime, due to the "systemctl
set-property" and transient unit logic.
Previously, the "transient" directory was created during early boot to
deal with this, but the "control" directories were not covered like
that. Creating the control directories early at boot is not possible
however, as /etc might be read-only then, and we do define a persistent
control directory. Hence, let's create these dirs on-demand when we need
them, and make sure the search path clean-up logic never drops them from
the search path even if they are initially missing.
(Also, always create these paths properly labelled)