Bindings/mfd/qcom,spmi-pmic.yaml

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Qualcomm SPMI PMICs multi-function device
   8
   9 description: |
  10   Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced
  11   to the chip via the SPMI (System Power Management Interface) bus.
  12   Support for multiple independent functions are implemented by splitting the
  13   16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes
  14   each. A function can consume one or more of these fixed-size register regions.
  15
  16   The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other
  17   PMICs.  These PMICs use a "QPNP" scheme through SPMI interface.
  18   QPNP is effectively a partitioning scheme for dividing the SPMI extended
  19   register space up into logical pieces, and set of fixed register
  20   locations/definitions within these regions, with some of these regions
  21   specifically used for interrupt handling.
  22
  23 maintainers:
  24   - Stephen Boyd <sboyd@kernel.org>
  25
  26 properties:
  27   $nodename:
  28     oneOf:
  29       - pattern: '^pmic@.*$'
  30       - pattern: '^pm(a|s)?[0-9]*@.*$'
  31         deprecated: true
  32
  33   compatible:
  34     items:
  35       - enum:
  36           - qcom,pm2250
  37           - qcom,pm6125
  38           - qcom,pm6150
  39           - qcom,pm6150l
  40           - qcom,pm6350
  41           - qcom,pm660
  42           - qcom,pm660l
  43           - qcom,pm7250b
  44           - qcom,pm7550ba
  45           - qcom,pm7325
  46           - qcom,pm8004
  47           - qcom,pm8005
  48           - qcom,pm8009
  49           - qcom,pm8010
  50           - qcom,pm8019
  51           - qcom,pm8028
  52           - qcom,pm8110
  53           - qcom,pm8150
  54           - qcom,pm8150b
  55           - qcom,pm8150c
  56           - qcom,pm8150l
  57           - qcom,pm8226
  58           - qcom,pm8350
  59           - qcom,pm8350b
  60           - qcom,pm8350c
  61           - qcom,pm8450
  62           - qcom,pm8550
  63           - qcom,pm8550b
  64           - qcom,pm8550ve
  65           - qcom,pm8550vs
  66           - qcom,pm8841
  67           - qcom,pm8909
  68           - qcom,pm8916
  69           - qcom,pm8941
  70           - qcom,pm8950
  71           - qcom,pm8953
  72           - qcom,pm8994
  73           - qcom,pm8998
  74           - qcom,pma8084
  75           - qcom,pmc8180
  76           - qcom,pmc8180c
  77           - qcom,pmd9635
  78           - qcom,pmi632
  79           - qcom,pmi8950
  80           - qcom,pmi8962
  81           - qcom,pmi8994
  82           - qcom,pmi8998
  83           - qcom,pmk8002
  84           - qcom,pmk8350
  85           - qcom,pmk8550
  86           - qcom,pmm8155au
  87           - qcom,pmm8654au
  88           - qcom,pmp8074
  89           - qcom,pmr735a
  90           - qcom,pmr735b
  91           - qcom,pmr735d
  92           - qcom,pms405
  93           - qcom,pmx55
  94           - qcom,pmx65
  95           - qcom,pmx75
  96           - qcom,smb2351
  97       - const: qcom,spmi-pmic
  98
  99   reg:
 100     minItems: 1
 101     maxItems: 2
 102
 103   '#address-cells':
 104     const: 1
 105
 106   '#size-cells':
 107     const: 0
 108
 109   labibb:
 110     type: object
 111     $ref: /schemas/regulator/qcom-labibb-regulator.yaml#
 112
 113   regulators:
 114     type: object
 115     $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
 116
 117   pwm:
 118     type: object
 119     $ref: /schemas/leds/leds-qcom-lpg.yaml#
 120
 121 patternProperties:
 122   "^adc@[0-9a-f]+$":
 123     type: object
 124     oneOf:
 125       - $ref: /schemas/iio/adc/qcom,spmi-iadc.yaml#
 126       - $ref: /schemas/iio/adc/qcom,spmi-rradc.yaml#
 127       - $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml#
 128
 129   "^adc-tm@[0-9a-f]+$":
 130     type: object
 131     # ref depends on compatible, see allOf below
 132
 133   "^audio-codec@[0-9a-f]+$":
 134     type: object
 135     $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
 136
 137   "^charger@[0-9a-f]+$":
 138     type: object
 139     oneOf:
 140       - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
 141       - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
 142       - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml#
 143
 144   "gpio@[0-9a-f]+$":
 145     type: object
 146     $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml#
 147
 148   "^led-controller@[0-9a-f]+$":
 149     type: object
 150     $ref: /schemas/leds/qcom,spmi-flash-led.yaml#
 151
 152   "^nvram@[0-9a-f]+$":
 153     type: object
 154     $ref: /schemas/nvmem/qcom,spmi-sdam.yaml#
 155
 156   "phy@[0-9a-f]+$":
 157     type: object
 158     $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml#
 159
 160   "pon@[0-9a-f]+$":
 161     type: object
 162     $ref: /schemas/power/reset/qcom,pon.yaml#
 163
 164   "^rtc@[0-9a-f]+$":
 165     type: object
 166     $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
 167
 168   "^temp-alarm@[0-9a-f]+$":
 169     type: object
 170     $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml#
 171
 172   "^typec@[0-9a-f]+$":
 173     type: object
 174     $ref: /schemas/usb/qcom,pmic-typec.yaml#
 175
 176   "^usb-detect@[0-9a-f]+$":
 177     type: object
 178     $ref: /schemas/extcon/qcom,pm8941-misc.yaml#
 179
 180   "^usb-vbus-regulator@[0-9a-f]+$":
 181     type: object
 182     $ref: /schemas/regulator/qcom,usb-vbus-regulator.yaml#
 183
 184   "^vibrator@[0-9a-f]+$":
 185     type: object
 186     $ref: /schemas/input/qcom,pm8xxx-vib.yaml#
 187
 188   "^mpps@[0-9a-f]+$":
 189     type: object
 190     $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml#
 191
 192   "(.*)?(wled|leds)@[0-9a-f]+$":
 193     type: object
 194     $ref: /schemas/leds/backlight/qcom-wled.yaml#
 195     unevaluatedProperties: false
 196
 197 required:
 198   - compatible
 199   - reg
 200
 201 allOf:
 202   - if:
 203       properties:
 204         compatible:
 205           contains:
 206             enum:
 207               - qcom,pm8998
 208     then:
 209       patternProperties:
 210         "^adc-tm@[0-9a-f]+$":
 211           $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
 212     else:
 213       patternProperties:
 214         "^adc-tm@[0-9a-f]+$":
 215           $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml#
 216
 217 additionalProperties: false
 218
 219 examples:
 220   - |
 221     #include <dt-bindings/spmi/spmi.h>
 222     #include <dt-bindings/interrupt-controller/irq.h>
 223     #include <dt-bindings/interrupt-controller/arm-gic.h>
 224
 225     spmi@c440000 {
 226         compatible = "qcom,spmi-pmic-arb";
 227         reg = <0x0c440000 0x1100>,
 228               <0x0c600000 0x2000000>,
 229               <0x0e600000 0x100000>,
 230               <0x0e700000 0xa0000>,
 231               <0x0c40a000 0x26000>;
 232         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 233         interrupt-names = "periph_irq";
 234         interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
 235         qcom,ee = <0>;
 236         qcom,channel = <0>;
 237         #address-cells = <2>;
 238         #size-cells = <0>;
 239         interrupt-controller;
 240         #interrupt-cells = <4>;
 241
 242         pmic@2 {
 243             compatible = "qcom,pmi8998", "qcom,spmi-pmic";
 244             reg = <0x2 SPMI_USID>;
 245             #address-cells = <1>;
 246             #size-cells = <0>;
 247
 248             gpio@c000 {
 249                 compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 250                 reg = <0xc000>;
 251                 gpio-controller;
 252                 gpio-ranges = <&pmi8998_gpio 0 0 14>;
 253                 #gpio-cells = <2>;
 254                 interrupt-controller;
 255                 #interrupt-cells = <2>;
 256             };
 257         };
 258     };
 259
 260   - |
 261     #include <dt-bindings/input/input.h>
 262     #include <dt-bindings/interrupt-controller/irq.h>
 263     #include <dt-bindings/interrupt-controller/arm-gic.h>
 264     #include <dt-bindings/iio/qcom,spmi-vadc.h>
 265     #include <dt-bindings/spmi/spmi.h>
 266
 267     pmic@0 {
 268         compatible = "qcom,pm6150", "qcom,spmi-pmic";
 269         reg = <0x0 SPMI_USID>;
 270         #address-cells = <1>;
 271         #size-cells = <0>;
 272
 273         pon@800 {
 274             compatible = "qcom,pm8998-pon";
 275             reg = <0x800>;
 276             mode-bootloader = <0x2>;
 277             mode-recovery = <0x1>;
 278
 279             pwrkey {
 280                 compatible = "qcom,pm8941-pwrkey";
 281                 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 282                 debounce = <15625>;
 283                 bias-pull-up;
 284                 linux,code = <KEY_POWER>;
 285             };
 286         };
 287
 288         temp-alarm@2400 {
 289             compatible = "qcom,spmi-temp-alarm";
 290             reg = <0x2400>;
 291             interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
 292             io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
 293             io-channel-names = "thermal";
 294             #thermal-sensor-cells = <0>;
 295         };
 296
 297         pm6150_adc: adc@3100 {
 298             compatible = "qcom,spmi-adc5";
 299             reg = <0x3100>;
 300             interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 301             #address-cells = <1>;
 302             #size-cells = <0>;
 303             #io-channel-cells = <1>;
 304
 305             channel@6 {
 306                 reg = <ADC5_DIE_TEMP>;
 307                 label = "die_temp";
 308             };
 309
 310             channel@4f {
 311                 reg = <ADC5_AMUX_THM3_100K_PU>;
 312                 qcom,ratiometric;
 313                 qcom,hw-settle-time = <200>;
 314             };
 315         };
 316
 317         adc-tm@3500 {
 318             compatible = "qcom,spmi-adc-tm5";
 319             reg = <0x3500>;
 320             interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
 321             #thermal-sensor-cells = <1>;
 322             #address-cells = <1>;
 323             #size-cells = <0>;
 324
 325             charger-thermistor@0 {
 326                 reg = <0>;
 327                 io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
 328                 qcom,ratiometric;
 329                 qcom,hw-settle-time-us = <200>;
 330             };
 331         };
 332
 333         gpio@c000 {
 334             compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 335             reg = <0xc000>;
 336             gpio-controller;
 337             gpio-ranges = <&pm6150_gpio 0 0 10>;
 338             #gpio-cells = <2>;
 339             interrupt-controller;
 340             #interrupt-cells = <2>;
 341         };
 342     };