Bindings/usb/microchip,usb5744.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/usb/microchip,usb5744.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Microchip USB5744 4-port Hub Controller
   8
   9 description:
  10   Microchip's USB5744 SmartHubTM IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS),
  11   low power, low pin count configurable and fully compliant with the USB 3.1
  12   Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed
  13   (LS) USB signaling, offering complete coverage of all defined USB operating
  14   speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0
  15   controller, so 5 Gbps SuperSpeed data transfers are not affected by slower
  16   USB 2.0 traffic.
  17
  18 maintainers:
  19   - Piyush Mehta <piyush.mehta@amd.com>
  20   - Michal Simek <michal.simek@amd.com>
  21
  22 properties:
  23   compatible:
  24     enum:
  25       - usb424,2744
  26       - usb424,5744
  27       - microchip,usb5744
  28
  29   reg:
  30     maxItems: 1
  31
  32   reset-gpios:
  33     maxItems: 1
  34     description:
  35       GPIO controlling the GRST# pin.
  36
  37   vdd-supply:
  38     description:
  39       3V3 power supply to the hub
  40
  41   vdd2-supply:
  42     description:
  43       1V2 power supply to the hub
  44
  45   peer-hub:
  46     $ref: /schemas/types.yaml#/definitions/phandle
  47     description:
  48       phandle to the peer hub on the controller.
  49
  50   i2c-bus:
  51     $ref: /schemas/types.yaml#/definitions/phandle
  52     description:
  53       phandle of an usb hub connected via i2c bus.
  54
  55 required:
  56   - compatible
  57   - reg
  58
  59 allOf:
  60   - if:
  61       properties:
  62         compatible:
  63           contains:
  64             const: microchip,usb5744
  65     then:
  66       properties:
  67         reset-gpios: false
  68         vdd-supply: false
  69         vdd2-supply: false
  70         peer-hub: false
  71         i2c-bus: false
  72     else:
  73       $ref: /schemas/usb/usb-device.yaml
  74       required:
  75         - peer-hub
  76
  77 additionalProperties: false
  78
  79 examples:
  80   - |
  81     #include <dt-bindings/gpio/gpio.h>
  82     i2c: i2c {
  83         #address-cells = <1>;
  84         #size-cells = <0>;
  85         hub: usb-hub@2d {
  86             compatible = "microchip,usb5744";
  87             reg = <0x2d>;
  88         };
  89     };
  90
  91     usb {
  92         #address-cells = <1>;
  93         #size-cells = <0>;
  94
  95         /* 2.0 hub on port 1 */
  96         hub_2_0: hub@1 {
  97             compatible = "usb424,2744";
  98             reg = <1>;
  99             peer-hub = <&hub_3_0>;
 100             i2c-bus = <&hub>;
 101             reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 102         };
 103
 104         /* 3.0 hub on port 2 */
 105         hub_3_0: hub@2 {
 106             compatible = "usb424,5744";
 107             reg = <2>;
 108             peer-hub = <&hub_2_0>;
 109             i2c-bus = <&hub>;
 110             reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 111         };
 112     };