]>
git.ipfire.org Git - thirdparty/u-boot.git/blob - board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
1 // SPDX-License-Identifier: GPL-2.0+
3 * (C) Copyright 2016 Rockchip Electronics Co., Ltd
4 * (C) Copyright 2020 Peter Robinson <pbrobinson at gmail.com>
11 #include <asm/arch-rockchip/clock.h>
12 #include <asm/arch-rockchip/grf_rk3399.h>
13 #include <asm/arch-rockchip/hardware.h>
14 #include <asm/arch-rockchip/misc.h>
15 #include <power/regulator.h>
17 #define GRF_IO_VSEL_BT565_SHIFT 0
18 #define PMUGRF_CON0_VSEL_SHIFT 8
20 #ifndef CONFIG_SPL_BUILD
21 int board_early_init_f(void)
23 struct udevice
*regulator
;
26 ret
= regulator_get_by_platname("vcc5v0_usb", ®ulator
);
28 pr_debug("%s vcc5v0_usb init fail! ret %d\n", __func__
, ret
);
32 ret
= regulator_set_enable(regulator
, true);
34 pr_debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__
, ret
);
41 #ifdef CONFIG_MISC_INIT_R
42 static void setup_iodomain(void)
44 struct rk3399_grf_regs
*grf
=
45 syscon_get_first_range(ROCKCHIP_SYSCON_GRF
);
46 struct rk3399_pmugrf_regs
*pmugrf
=
47 syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF
);
49 /* BT565 is in 1.8v domain */
50 rk_setreg(&grf
->io_vsel
, 1 << GRF_IO_VSEL_BT565_SHIFT
);
52 /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
53 rk_setreg(&pmugrf
->soc_con0
, 1 << PMUGRF_CON0_VSEL_SHIFT
);
58 const u32 cpuid_offset
= 0x7;
59 const u32 cpuid_length
= 0x10;
60 u8 cpuid
[cpuid_length
];
65 ret
= rockchip_cpuid_from_efuse(cpuid_offset
, cpuid_length
, cpuid
);
69 ret
= rockchip_cpuid_set(cpuid
, cpuid_length
);