1 // SPDX-License-Identifier: GPL-2.0+
3 * Most of this source has been derived from the Linux USB
5 * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
6 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
7 * (c) 1999 Michael Gee (michael@linuxspecific.com)
8 * (c) 2000 Yggdrasil Computing, Inc.
12 * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
13 * Driver model conversion:
14 * (C) Copyright 2015 Google, Inc
16 * For BBB support (C) Copyright 2003
17 * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
19 * BBB support based on /sys/dev/usb/umass.c from
24 * Currently only the CBI transport protocoll has been implemented, and it
25 * is only tested with a TEAC USB Floppy. Other Massstorages with CBI or CB
26 * transport protocoll may work as well.
30 * Support for USB Mass Storage Devices (BBB) has been added. It has
31 * only been tested with USB memory sticks.
43 #include <asm/byteorder.h>
44 #include <asm/cache.h>
45 #include <asm/processor.h>
46 #include <dm/device-internal.h>
48 #include <linux/delay.h>
53 #undef BBB_COMDAT_TRACE
54 #undef BBB_XPORT_TRACE
57 /* direction table -- this indicates the direction of the data
58 * transfer for each command code -- a 1 indicates input
60 static const unsigned char us_direction
[256/8] = {
61 0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
62 0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
63 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
64 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
66 #define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1)
68 static struct scsi_cmd usb_ccb
__aligned(ARCH_DMA_MINALIGN
);
71 static int usb_max_devs
; /* number of highest available usb device */
73 #if !CONFIG_IS_ENABLED(BLK)
74 static struct blk_desc usb_dev_desc
[USB_MAX_STOR_DEV
];
78 typedef int (*trans_cmnd
)(struct scsi_cmd
*cb
, struct us_data
*data
);
79 typedef int (*trans_reset
)(struct us_data
*data
);
82 struct usb_device
*pusb_dev
; /* this usb_device */
84 unsigned int flags
; /* from filter initially */
85 # define USB_READY (1 << 0)
86 unsigned char ifnum
; /* interface number */
87 unsigned char ep_in
; /* in endpoint */
88 unsigned char ep_out
; /* out ....... */
89 unsigned char ep_int
; /* interrupt . */
90 unsigned char subclass
; /* as in overview */
91 unsigned char protocol
; /* .............. */
92 unsigned char attention_done
; /* force attn on first cmd */
93 unsigned short ip_data
; /* interrupt data */
94 int action
; /* what to do */
95 int ip_wanted
; /* needed */
96 int *irq_handle
; /* for USB int requests */
97 unsigned int irqpipe
; /* pipe for release_irq */
98 unsigned char irqmaxp
; /* max packed for irq Pipe */
99 unsigned char irqinterval
; /* Intervall for IRQ Pipe */
100 struct scsi_cmd
*srb
; /* current srb */
101 trans_reset transport_reset
; /* reset routine */
102 trans_cmnd transport
; /* transport routine */
103 unsigned short max_xfer_blk
; /* maximum transfer blocks */
106 #if !CONFIG_IS_ENABLED(BLK)
107 static struct us_data usb_stor
[USB_MAX_STOR_DEV
];
110 #define USB_STOR_TRANSPORT_GOOD 0
111 #define USB_STOR_TRANSPORT_FAILED -1
112 #define USB_STOR_TRANSPORT_ERROR -2
114 int usb_stor_get_info(struct usb_device
*dev
, struct us_data
*us
,
115 struct blk_desc
*dev_desc
);
116 int usb_storage_probe(struct usb_device
*dev
, unsigned int ifnum
,
118 #if CONFIG_IS_ENABLED(BLK)
119 static unsigned long usb_stor_read(struct udevice
*dev
, lbaint_t blknr
,
120 lbaint_t blkcnt
, void *buffer
);
121 static unsigned long usb_stor_write(struct udevice
*dev
, lbaint_t blknr
,
122 lbaint_t blkcnt
, const void *buffer
);
124 static unsigned long usb_stor_read(struct blk_desc
*block_dev
, lbaint_t blknr
,
125 lbaint_t blkcnt
, void *buffer
);
126 static unsigned long usb_stor_write(struct blk_desc
*block_dev
, lbaint_t blknr
,
127 lbaint_t blkcnt
, const void *buffer
);
129 void uhci_show_temp_int_td(void);
131 static void usb_show_progress(void)
136 /*******************************************************************************
137 * show info on storage devices; 'usb start/init' must be invoked earlier
138 * as we only retrieve structures populated during devices initialization
140 int usb_stor_info(void)
143 #if CONFIG_IS_ENABLED(BLK)
146 for (blk_first_device(IF_TYPE_USB
, &dev
);
148 blk_next_device(&dev
)) {
149 struct blk_desc
*desc
= dev_get_uclass_plat(dev
);
151 printf(" Device %d: ", desc
->devnum
);
158 if (usb_max_devs
> 0) {
159 for (i
= 0; i
< usb_max_devs
; i
++) {
160 printf(" Device %d: ", i
);
161 dev_print(&usb_dev_desc
[i
]);
167 printf("No storage devices, perhaps not 'usb start'ed..?\n");
174 static unsigned int usb_get_max_lun(struct us_data
*us
)
177 ALLOC_CACHE_ALIGN_BUFFER(unsigned char, result
, 1);
178 len
= usb_control_msg(us
->pusb_dev
,
179 usb_rcvctrlpipe(us
->pusb_dev
, 0),
181 USB_TYPE_CLASS
| USB_RECIP_INTERFACE
| USB_DIR_IN
,
183 result
, sizeof(char),
184 USB_CNTL_TIMEOUT
* 5);
185 debug("Get Max LUN -> len = %i, result = %i\n", len
, (int) *result
);
186 return (len
> 0) ? *result
: 0;
189 static int usb_stor_probe_device(struct usb_device
*udev
)
193 #if CONFIG_IS_ENABLED(BLK)
194 struct us_data
*data
;
200 return -ENOENT
; /* no more devices available */
203 debug("\n\nProbing for storage\n");
204 #if CONFIG_IS_ENABLED(BLK)
206 * We store the us_data in the mass storage device's plat. It
207 * is shared by all LUNs (block devices) attached to this mass storage
210 data
= dev_get_plat(udev
->dev
);
211 if (!usb_storage_probe(udev
, 0, data
))
213 max_lun
= usb_get_max_lun(data
);
214 for (lun
= 0; lun
<= max_lun
; lun
++) {
215 struct blk_desc
*blkdev
;
219 snprintf(str
, sizeof(str
), "lun%d", lun
);
220 ret
= blk_create_devicef(udev
->dev
, "usb_storage_blk", str
,
221 IF_TYPE_USB
, usb_max_devs
, 512, 0,
224 debug("Cannot bind driver\n");
228 blkdev
= dev_get_uclass_plat(dev
);
229 blkdev
->target
= 0xff;
232 ret
= usb_stor_get_info(udev
, data
, blkdev
);
235 debug("%s: Found device %p\n", __func__
, udev
);
237 debug("usb_stor_get_info: Invalid device\n");
238 ret
= device_unbind(dev
);
244 /* We don't have space to even probe if we hit the maximum */
245 if (usb_max_devs
== USB_MAX_STOR_DEV
) {
246 printf("max USB Storage Device reached: %d stopping\n",
251 if (!usb_storage_probe(udev
, 0, &usb_stor
[usb_max_devs
]))
255 * OK, it's a storage device. Iterate over its LUNs and populate
258 start
= usb_max_devs
;
260 max_lun
= usb_get_max_lun(&usb_stor
[usb_max_devs
]);
261 for (lun
= 0; lun
<= max_lun
&& usb_max_devs
< USB_MAX_STOR_DEV
;
263 struct blk_desc
*blkdev
;
265 blkdev
= &usb_dev_desc
[usb_max_devs
];
266 memset(blkdev
, '\0', sizeof(struct blk_desc
));
267 blkdev
->if_type
= IF_TYPE_USB
;
268 blkdev
->devnum
= usb_max_devs
;
269 blkdev
->part_type
= PART_TYPE_UNKNOWN
;
270 blkdev
->target
= 0xff;
271 blkdev
->type
= DEV_TYPE_UNKNOWN
;
272 blkdev
->block_read
= usb_stor_read
;
273 blkdev
->block_write
= usb_stor_write
;
277 if (usb_stor_get_info(udev
, &usb_stor
[start
],
278 &usb_dev_desc
[usb_max_devs
]) == 1) {
279 debug("partype: %d\n", blkdev
->part_type
);
281 debug("partype: %d\n", blkdev
->part_type
);
283 debug("%s: Found device %p\n", __func__
, udev
);
291 void usb_stor_reset(void)
296 /*******************************************************************************
297 * scan the usb and reports device info
298 * to the user if mode = 1
299 * returns current device or -1 if no
301 int usb_stor_scan(int mode
)
304 printf(" scanning usb for storage devices... ");
306 #if !CONFIG_IS_ENABLED(DM_USB)
309 usb_disable_asynch(1); /* asynch transfer not allowed */
312 for (i
= 0; i
< USB_MAX_DEVICE
; i
++) {
313 struct usb_device
*dev
;
315 dev
= usb_get_dev_index(i
); /* get device */
317 if (usb_stor_probe_device(dev
))
321 usb_disable_asynch(0); /* asynch transfer allowed */
323 printf("%d Storage Device(s) found\n", usb_max_devs
);
324 if (usb_max_devs
> 0)
329 static int usb_stor_irq(struct usb_device
*dev
)
332 us
= (struct us_data
*)dev
->privptr
;
342 static void usb_show_srb(struct scsi_cmd
*pccb
)
345 printf("SRB: len %d datalen 0x%lX\n ", pccb
->cmdlen
, pccb
->datalen
);
346 for (i
= 0; i
< 12; i
++)
347 printf("%02X ", pccb
->cmd
[i
]);
351 static void display_int_status(unsigned long tmp
)
353 printf("Status: %s %s %s %s %s %s %s\n",
354 (tmp
& USB_ST_ACTIVE
) ? "Active" : "",
355 (tmp
& USB_ST_STALLED
) ? "Stalled" : "",
356 (tmp
& USB_ST_BUF_ERR
) ? "Buffer Error" : "",
357 (tmp
& USB_ST_BABBLE_DET
) ? "Babble Det" : "",
358 (tmp
& USB_ST_NAK_REC
) ? "NAKed" : "",
359 (tmp
& USB_ST_CRC_ERR
) ? "CRC Error" : "",
360 (tmp
& USB_ST_BIT_ERR
) ? "Bitstuff Error" : "");
363 /***********************************************************************
364 * Data transfer routines
365 ***********************************************************************/
367 static int us_one_transfer(struct us_data
*us
, int pipe
, char *buf
, int length
)
376 /* determine the maximum packet size for these transfers */
377 max_size
= usb_maxpacket(us
->pusb_dev
, pipe
) * 16;
379 /* while we have data left to transfer */
382 /* calculate how long this will be -- maximum or a remainder */
383 this_xfer
= length
> max_size
? max_size
: length
;
386 /* setup the retry counter */
389 /* set up the transfer loop */
391 /* transfer the data */
392 debug("Bulk xfer 0x%lx(%d) try #%d\n",
393 (ulong
)map_to_sysmem(buf
), this_xfer
,
395 result
= usb_bulk_msg(us
->pusb_dev
, pipe
, buf
,
397 USB_CNTL_TIMEOUT
* 5);
398 debug("bulk_msg returned %d xferred %d/%d\n",
399 result
, partial
, this_xfer
);
400 if (us
->pusb_dev
->status
!= 0) {
401 /* if we stall, we need to clear it before
405 display_int_status(us
->pusb_dev
->status
);
407 if (us
->pusb_dev
->status
& USB_ST_STALLED
) {
408 debug("stalled ->clearing endpoint" \
409 "halt for pipe 0x%x\n", pipe
);
410 stat
= us
->pusb_dev
->status
;
411 usb_clear_halt(us
->pusb_dev
, pipe
);
412 us
->pusb_dev
->status
= stat
;
413 if (this_xfer
== partial
) {
414 debug("bulk transferred" \
417 us
->pusb_dev
->status
);
423 if (us
->pusb_dev
->status
& USB_ST_NAK_REC
) {
424 debug("Device NAKed bulk_msg\n");
427 debug("bulk transferred with error");
428 if (this_xfer
== partial
) {
429 debug(" %ld, but data ok\n",
430 us
->pusb_dev
->status
);
433 /* if our try counter reaches 0, bail out */
434 debug(" %ld, data %d\n",
435 us
->pusb_dev
->status
, partial
);
439 /* update to show what data was transferred */
440 this_xfer
-= partial
;
442 /* continue until this transfer is done */
446 /* if we get here, we're done and successful */
450 static int usb_stor_BBB_reset(struct us_data
*us
)
456 * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class)
458 * For Reset Recovery the host shall issue in the following order:
459 * a) a Bulk-Only Mass Storage Reset
460 * b) a Clear Feature HALT to the Bulk-In endpoint
461 * c) a Clear Feature HALT to the Bulk-Out endpoint
463 * This is done in 3 steps.
465 * If the reset doesn't succeed, the device should be port reset.
467 * This comment stolen from FreeBSD's /sys/dev/usb/umass.c.
469 debug("BBB_reset\n");
470 result
= usb_control_msg(us
->pusb_dev
, usb_sndctrlpipe(us
->pusb_dev
, 0),
472 USB_TYPE_CLASS
| USB_RECIP_INTERFACE
,
473 0, us
->ifnum
, NULL
, 0, USB_CNTL_TIMEOUT
* 5);
475 if ((result
< 0) && (us
->pusb_dev
->status
& USB_ST_STALLED
)) {
476 debug("RESET:stall\n");
480 /* long wait for reset */
482 debug("BBB_reset result %d: status %lX reset\n",
483 result
, us
->pusb_dev
->status
);
484 pipe
= usb_rcvbulkpipe(us
->pusb_dev
, us
->ep_in
);
485 result
= usb_clear_halt(us
->pusb_dev
, pipe
);
486 /* long wait for reset */
488 debug("BBB_reset result %d: status %lX clearing IN endpoint\n",
489 result
, us
->pusb_dev
->status
);
490 /* long wait for reset */
491 pipe
= usb_sndbulkpipe(us
->pusb_dev
, us
->ep_out
);
492 result
= usb_clear_halt(us
->pusb_dev
, pipe
);
494 debug("BBB_reset result %d: status %lX clearing OUT endpoint\n",
495 result
, us
->pusb_dev
->status
);
496 debug("BBB_reset done\n");
500 /* FIXME: this reset function doesn't really reset the port, and it
501 * should. Actually it should probably do what it's doing here, and
502 * reset the port physically
504 static int usb_stor_CB_reset(struct us_data
*us
)
506 unsigned char cmd
[12];
510 memset(cmd
, 0xff, sizeof(cmd
));
511 cmd
[0] = SCSI_SEND_DIAG
;
513 result
= usb_control_msg(us
->pusb_dev
, usb_sndctrlpipe(us
->pusb_dev
, 0),
515 USB_TYPE_CLASS
| USB_RECIP_INTERFACE
,
516 0, us
->ifnum
, cmd
, sizeof(cmd
),
517 USB_CNTL_TIMEOUT
* 5);
519 /* long wait for reset */
521 debug("CB_reset result %d: status %lX clearing endpoint halt\n",
522 result
, us
->pusb_dev
->status
);
523 usb_clear_halt(us
->pusb_dev
, usb_rcvbulkpipe(us
->pusb_dev
, us
->ep_in
));
524 usb_clear_halt(us
->pusb_dev
, usb_rcvbulkpipe(us
->pusb_dev
, us
->ep_out
));
526 debug("CB_reset done\n");
531 * Set up the command for a BBB device. Note that the actual SCSI
532 * command is copied into cbw.CBWCDB.
534 static int usb_stor_BBB_comdat(struct scsi_cmd
*srb
, struct us_data
*us
)
540 ALLOC_CACHE_ALIGN_BUFFER(struct umass_bbb_cbw
, cbw
, 1);
542 dir_in
= US_DIRECTION(srb
->cmd
[0]);
544 #ifdef BBB_COMDAT_TRACE
545 printf("dir %d lun %d cmdlen %d cmd %p datalen %lu pdata %p\n",
546 dir_in
, srb
->lun
, srb
->cmdlen
, srb
->cmd
, srb
->datalen
,
549 for (result
= 0; result
< srb
->cmdlen
; result
++)
550 printf("cmd[%d] %#x ", result
, srb
->cmd
[result
]);
555 if (!(srb
->cmdlen
<= CBWCDBLENGTH
)) {
556 debug("usb_stor_BBB_comdat:cmdlen too large\n");
560 /* always OUT to the ep */
561 pipe
= usb_sndbulkpipe(us
->pusb_dev
, us
->ep_out
);
563 cbw
->dCBWSignature
= cpu_to_le32(CBWSIGNATURE
);
564 cbw
->dCBWTag
= cpu_to_le32(CBWTag
++);
565 cbw
->dCBWDataTransferLength
= cpu_to_le32(srb
->datalen
);
566 cbw
->bCBWFlags
= (dir_in
? CBWFLAGS_IN
: CBWFLAGS_OUT
);
567 cbw
->bCBWLUN
= srb
->lun
;
568 cbw
->bCDBLength
= srb
->cmdlen
;
569 /* copy the command data into the CBW command data buffer */
572 memcpy(cbw
->CBWCDB
, srb
->cmd
, srb
->cmdlen
);
573 result
= usb_bulk_msg(us
->pusb_dev
, pipe
, cbw
, UMASS_BBB_CBW_SIZE
,
574 &actlen
, USB_CNTL_TIMEOUT
* 5);
576 debug("usb_stor_BBB_comdat:usb_bulk_msg error\n");
580 /* FIXME: we also need a CBI_command which sets up the completion
581 * interrupt, and waits for it
583 static int usb_stor_CB_comdat(struct scsi_cmd
*srb
, struct us_data
*us
)
588 unsigned long status
;
591 dir_in
= US_DIRECTION(srb
->cmd
[0]);
594 pipe
= usb_rcvbulkpipe(us
->pusb_dev
, us
->ep_in
);
596 pipe
= usb_sndbulkpipe(us
->pusb_dev
, us
->ep_out
);
599 debug("CBI gets a command: Try %d\n", 5 - retry
);
603 /* let's send the command via the control pipe */
604 result
= usb_control_msg(us
->pusb_dev
,
605 usb_sndctrlpipe(us
->pusb_dev
, 0),
607 USB_TYPE_CLASS
| USB_RECIP_INTERFACE
,
609 srb
->cmd
, srb
->cmdlen
,
610 USB_CNTL_TIMEOUT
* 5);
611 debug("CB_transport: control msg returned %d, status %lX\n",
612 result
, us
->pusb_dev
->status
);
613 /* check the return code for the command */
615 if (us
->pusb_dev
->status
& USB_ST_STALLED
) {
616 status
= us
->pusb_dev
->status
;
617 debug(" stall during command found," \
619 usb_clear_halt(us
->pusb_dev
,
620 usb_sndctrlpipe(us
->pusb_dev
, 0));
621 us
->pusb_dev
->status
= status
;
623 debug(" error during command %02X" \
624 " Stat = %lX\n", srb
->cmd
[0],
625 us
->pusb_dev
->status
);
628 /* transfer the data payload for this command, if one exists*/
630 debug("CB_transport: control msg returned %d," \
631 " direction is %s to go 0x%lx\n", result
,
632 dir_in
? "IN" : "OUT", srb
->datalen
);
634 result
= us_one_transfer(us
, pipe
, (char *)srb
->pdata
,
636 debug("CBI attempted to transfer data," \
637 " result is %d status %lX, len %d\n",
638 result
, us
->pusb_dev
->status
,
639 us
->pusb_dev
->act_len
);
640 if (!(us
->pusb_dev
->status
& USB_ST_NAK_REC
))
642 } /* if (srb->datalen) */
652 static int usb_stor_CBI_get_status(struct scsi_cmd
*srb
, struct us_data
*us
)
657 usb_int_msg(us
->pusb_dev
, us
->irqpipe
,
658 (void *)&us
->ip_data
, us
->irqmaxp
, us
->irqinterval
, false);
661 if (us
->ip_wanted
== 0)
666 printf(" Did not get interrupt on CBI\n");
668 return USB_STOR_TRANSPORT_ERROR
;
670 debug("Got interrupt data 0x%x, transferred %d status 0x%lX\n",
671 us
->ip_data
, us
->pusb_dev
->irq_act_len
,
672 us
->pusb_dev
->irq_status
);
673 /* UFI gives us ASC and ASCQ, like a request sense */
674 if (us
->subclass
== US_SC_UFI
) {
675 if (srb
->cmd
[0] == SCSI_REQ_SENSE
||
676 srb
->cmd
[0] == SCSI_INQUIRY
)
677 return USB_STOR_TRANSPORT_GOOD
; /* Good */
678 else if (us
->ip_data
)
679 return USB_STOR_TRANSPORT_FAILED
;
681 return USB_STOR_TRANSPORT_GOOD
;
683 /* otherwise, we interpret the data normally */
684 switch (us
->ip_data
) {
686 return USB_STOR_TRANSPORT_GOOD
;
688 return USB_STOR_TRANSPORT_FAILED
;
690 return USB_STOR_TRANSPORT_ERROR
;
692 return USB_STOR_TRANSPORT_ERROR
;
695 #define USB_TRANSPORT_UNKNOWN_RETRY 5
696 #define USB_TRANSPORT_NOT_READY_RETRY 10
698 /* clear a stall on an endpoint - special for BBB devices */
699 static int usb_stor_BBB_clear_endpt_stall(struct us_data
*us
, __u8 endpt
)
701 /* ENDPOINT_HALT = 0, so set value to 0 */
702 return usb_control_msg(us
->pusb_dev
, usb_sndctrlpipe(us
->pusb_dev
, 0),
703 USB_REQ_CLEAR_FEATURE
, USB_RECIP_ENDPOINT
, 0,
704 endpt
, NULL
, 0, USB_CNTL_TIMEOUT
* 5);
707 static int usb_stor_BBB_transport(struct scsi_cmd
*srb
, struct us_data
*us
)
711 int actlen
, data_actlen
;
712 unsigned int pipe
, pipein
, pipeout
;
713 ALLOC_CACHE_ALIGN_BUFFER(struct umass_bbb_csw
, csw
, 1);
714 #ifdef BBB_XPORT_TRACE
719 dir_in
= US_DIRECTION(srb
->cmd
[0]);
722 debug("COMMAND phase\n");
723 result
= usb_stor_BBB_comdat(srb
, us
);
725 debug("failed to send CBW status %ld\n",
726 us
->pusb_dev
->status
);
727 usb_stor_BBB_reset(us
);
728 return USB_STOR_TRANSPORT_FAILED
;
730 if (!(us
->flags
& USB_READY
))
732 pipein
= usb_rcvbulkpipe(us
->pusb_dev
, us
->ep_in
);
733 pipeout
= usb_sndbulkpipe(us
->pusb_dev
, us
->ep_out
);
734 /* DATA phase + error handling */
736 /* no data, go immediately to the STATUS phase */
737 if (srb
->datalen
== 0)
739 debug("DATA phase\n");
745 result
= usb_bulk_msg(us
->pusb_dev
, pipe
, srb
->pdata
, srb
->datalen
,
746 &data_actlen
, USB_CNTL_TIMEOUT
* 5);
747 /* special handling of STALL in DATA phase */
748 if ((result
< 0) && (us
->pusb_dev
->status
& USB_ST_STALLED
)) {
749 debug("DATA:stall\n");
750 /* clear the STALL on the endpoint */
751 result
= usb_stor_BBB_clear_endpt_stall(us
,
752 dir_in
? us
->ep_in
: us
->ep_out
);
754 /* continue on to STATUS phase */
758 debug("usb_bulk_msg error status %ld\n",
759 us
->pusb_dev
->status
);
760 usb_stor_BBB_reset(us
);
761 return USB_STOR_TRANSPORT_FAILED
;
763 #ifdef BBB_XPORT_TRACE
764 for (index
= 0; index
< data_actlen
; index
++)
765 printf("pdata[%d] %#x ", index
, srb
->pdata
[index
]);
768 /* STATUS phase + error handling */
772 debug("STATUS phase\n");
773 result
= usb_bulk_msg(us
->pusb_dev
, pipein
, csw
, UMASS_BBB_CSW_SIZE
,
774 &actlen
, USB_CNTL_TIMEOUT
*5);
776 /* special handling of STALL in STATUS phase */
777 if ((result
< 0) && (retry
< 1) &&
778 (us
->pusb_dev
->status
& USB_ST_STALLED
)) {
779 debug("STATUS:stall\n");
780 /* clear the STALL on the endpoint */
781 result
= usb_stor_BBB_clear_endpt_stall(us
, us
->ep_in
);
782 if (result
>= 0 && (retry
++ < 1))
787 debug("usb_bulk_msg error status %ld\n",
788 us
->pusb_dev
->status
);
789 usb_stor_BBB_reset(us
);
790 return USB_STOR_TRANSPORT_FAILED
;
792 #ifdef BBB_XPORT_TRACE
793 ptr
= (unsigned char *)csw
;
794 for (index
= 0; index
< UMASS_BBB_CSW_SIZE
; index
++)
795 printf("ptr[%d] %#x ", index
, ptr
[index
]);
798 /* misuse pipe to get the residue */
799 pipe
= le32_to_cpu(csw
->dCSWDataResidue
);
800 if (pipe
== 0 && srb
->datalen
!= 0 && srb
->datalen
- data_actlen
!= 0)
801 pipe
= srb
->datalen
- data_actlen
;
802 if (CSWSIGNATURE
!= le32_to_cpu(csw
->dCSWSignature
)) {
803 debug("!CSWSIGNATURE\n");
804 usb_stor_BBB_reset(us
);
805 return USB_STOR_TRANSPORT_FAILED
;
806 } else if ((CBWTag
- 1) != le32_to_cpu(csw
->dCSWTag
)) {
808 usb_stor_BBB_reset(us
);
809 return USB_STOR_TRANSPORT_FAILED
;
810 } else if (csw
->bCSWStatus
> CSWSTATUS_PHASE
) {
812 usb_stor_BBB_reset(us
);
813 return USB_STOR_TRANSPORT_FAILED
;
814 } else if (csw
->bCSWStatus
== CSWSTATUS_PHASE
) {
816 usb_stor_BBB_reset(us
);
817 return USB_STOR_TRANSPORT_FAILED
;
818 } else if (data_actlen
> srb
->datalen
) {
819 debug("transferred %dB instead of %ldB\n",
820 data_actlen
, srb
->datalen
);
821 return USB_STOR_TRANSPORT_FAILED
;
822 } else if (csw
->bCSWStatus
== CSWSTATUS_FAILED
) {
824 return USB_STOR_TRANSPORT_FAILED
;
830 static int usb_stor_CB_transport(struct scsi_cmd
*srb
, struct us_data
*us
)
833 struct scsi_cmd
*psrb
;
834 struct scsi_cmd reqsrb
;
838 status
= USB_STOR_TRANSPORT_GOOD
;
841 /* issue the command */
843 result
= usb_stor_CB_comdat(srb
, us
);
844 debug("command / Data returned %d, status %lX\n",
845 result
, us
->pusb_dev
->status
);
846 /* if this is an CBI Protocol, get IRQ */
847 if (us
->protocol
== US_PR_CBI
) {
848 status
= usb_stor_CBI_get_status(srb
, us
);
849 /* if the status is error, report it */
850 if (status
== USB_STOR_TRANSPORT_ERROR
) {
851 debug(" USB CBI Command Error\n");
854 srb
->sense_buf
[12] = (unsigned char)(us
->ip_data
>> 8);
855 srb
->sense_buf
[13] = (unsigned char)(us
->ip_data
& 0xff);
857 /* if the status is good, report it */
858 if (status
== USB_STOR_TRANSPORT_GOOD
) {
859 debug(" USB CBI Command Good\n");
864 /* do we have to issue an auto request? */
865 /* HERE we have to check the result */
866 if ((result
< 0) && !(us
->pusb_dev
->status
& USB_ST_STALLED
)) {
867 debug("ERROR %lX\n", us
->pusb_dev
->status
);
868 us
->transport_reset(us
);
869 return USB_STOR_TRANSPORT_ERROR
;
871 if ((us
->protocol
== US_PR_CBI
) &&
872 ((srb
->cmd
[0] == SCSI_REQ_SENSE
) ||
873 (srb
->cmd
[0] == SCSI_INQUIRY
))) {
874 /* do not issue an autorequest after request sense */
875 debug("No auto request and good\n");
876 return USB_STOR_TRANSPORT_GOOD
;
878 /* issue an request_sense */
879 memset(&psrb
->cmd
[0], 0, 12);
880 psrb
->cmd
[0] = SCSI_REQ_SENSE
;
881 psrb
->cmd
[1] = srb
->lun
<< 5;
884 psrb
->pdata
= &srb
->sense_buf
[0];
886 /* issue the command */
887 result
= usb_stor_CB_comdat(psrb
, us
);
888 debug("auto request returned %d\n", result
);
889 /* if this is an CBI Protocol, get IRQ */
890 if (us
->protocol
== US_PR_CBI
)
891 status
= usb_stor_CBI_get_status(psrb
, us
);
893 if ((result
< 0) && !(us
->pusb_dev
->status
& USB_ST_STALLED
)) {
894 debug(" AUTO REQUEST ERROR %ld\n",
895 us
->pusb_dev
->status
);
896 return USB_STOR_TRANSPORT_ERROR
;
898 debug("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
899 srb
->sense_buf
[0], srb
->sense_buf
[2],
900 srb
->sense_buf
[12], srb
->sense_buf
[13]);
901 /* Check the auto request result */
902 if ((srb
->sense_buf
[2] == 0) &&
903 (srb
->sense_buf
[12] == 0) &&
904 (srb
->sense_buf
[13] == 0)) {
906 return USB_STOR_TRANSPORT_GOOD
;
909 /* Check the auto request result */
910 switch (srb
->sense_buf
[2]) {
912 /* Recovered Error */
913 return USB_STOR_TRANSPORT_GOOD
;
917 if (notready
++ > USB_TRANSPORT_NOT_READY_RETRY
) {
918 printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
919 " 0x%02X (NOT READY)\n", srb
->cmd
[0],
920 srb
->sense_buf
[0], srb
->sense_buf
[2],
921 srb
->sense_buf
[12], srb
->sense_buf
[13]);
922 return USB_STOR_TRANSPORT_FAILED
;
929 if (retry
++ > USB_TRANSPORT_UNKNOWN_RETRY
) {
930 printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
931 " 0x%02X\n", srb
->cmd
[0], srb
->sense_buf
[0],
932 srb
->sense_buf
[2], srb
->sense_buf
[12],
934 return USB_STOR_TRANSPORT_FAILED
;
939 return USB_STOR_TRANSPORT_FAILED
;
942 static void usb_stor_set_max_xfer_blk(struct usb_device
*udev
,
946 * Limit the total size of a transfer to 120 KB.
948 * Some devices are known to choke with anything larger. It seems like
949 * the problem stems from the fact that original IDE controllers had
950 * only an 8-bit register to hold the number of sectors in one transfer
951 * and even those couldn't handle a full 256 sectors.
953 * Because we want to make sure we interoperate with as many devices as
954 * possible, we will maintain a 240 sector transfer size limit for USB
955 * Mass Storage devices.
957 * Tests show that other operating have similar limits with Microsoft
958 * Windows 7 limiting transfers to 128 sectors for both USB2 and USB3
959 * and Apple Mac OS X 10.11 limiting transfers to 256 sectors for USB2
960 * and 2048 for USB3 devices.
962 unsigned short blk
= 240;
964 #if CONFIG_IS_ENABLED(DM_USB)
968 ret
= usb_get_max_xfer_size(udev
, (size_t *)&size
);
969 if ((ret
>= 0) && (size
< blk
* 512))
973 us
->max_xfer_blk
= blk
;
976 static int usb_inquiry(struct scsi_cmd
*srb
, struct us_data
*ss
)
981 memset(&srb
->cmd
[0], 0, 12);
982 srb
->cmd
[0] = SCSI_INQUIRY
;
983 srb
->cmd
[1] = srb
->lun
<< 5;
987 i
= ss
->transport(srb
, ss
);
988 debug("inquiry returns %d\n", i
);
994 printf("error in inquiry\n");
1000 static int usb_request_sense(struct scsi_cmd
*srb
, struct us_data
*ss
)
1004 ptr
= (char *)srb
->pdata
;
1005 memset(&srb
->cmd
[0], 0, 12);
1006 srb
->cmd
[0] = SCSI_REQ_SENSE
;
1007 srb
->cmd
[1] = srb
->lun
<< 5;
1010 srb
->pdata
= &srb
->sense_buf
[0];
1012 ss
->transport(srb
, ss
);
1013 debug("Request Sense returned %02X %02X %02X\n",
1014 srb
->sense_buf
[2], srb
->sense_buf
[12],
1015 srb
->sense_buf
[13]);
1016 srb
->pdata
= (uchar
*)ptr
;
1020 static int usb_test_unit_ready(struct scsi_cmd
*srb
, struct us_data
*ss
)
1025 memset(&srb
->cmd
[0], 0, 12);
1026 srb
->cmd
[0] = SCSI_TST_U_RDY
;
1027 srb
->cmd
[1] = srb
->lun
<< 5;
1030 if (ss
->transport(srb
, ss
) == USB_STOR_TRANSPORT_GOOD
) {
1031 ss
->flags
|= USB_READY
;
1034 usb_request_sense(srb
, ss
);
1036 * Check the Key Code Qualifier, if it matches
1037 * "Not Ready - medium not present"
1038 * (the sense Key equals 0x2 and the ASC is 0x3a)
1039 * return immediately as the medium being absent won't change
1040 * unless there is a user action.
1042 if ((srb
->sense_buf
[2] == 0x02) &&
1043 (srb
->sense_buf
[12] == 0x3a))
1046 } while (retries
--);
1051 static int usb_read_capacity(struct scsi_cmd
*srb
, struct us_data
*ss
)
1057 memset(&srb
->cmd
[0], 0, 12);
1058 srb
->cmd
[0] = SCSI_RD_CAPAC
;
1059 srb
->cmd
[1] = srb
->lun
<< 5;
1062 if (ss
->transport(srb
, ss
) == USB_STOR_TRANSPORT_GOOD
)
1069 static int usb_read_10(struct scsi_cmd
*srb
, struct us_data
*ss
,
1070 unsigned long start
, unsigned short blocks
)
1072 memset(&srb
->cmd
[0], 0, 12);
1073 srb
->cmd
[0] = SCSI_READ10
;
1074 srb
->cmd
[1] = srb
->lun
<< 5;
1075 srb
->cmd
[2] = ((unsigned char) (start
>> 24)) & 0xff;
1076 srb
->cmd
[3] = ((unsigned char) (start
>> 16)) & 0xff;
1077 srb
->cmd
[4] = ((unsigned char) (start
>> 8)) & 0xff;
1078 srb
->cmd
[5] = ((unsigned char) (start
)) & 0xff;
1079 srb
->cmd
[7] = ((unsigned char) (blocks
>> 8)) & 0xff;
1080 srb
->cmd
[8] = (unsigned char) blocks
& 0xff;
1082 debug("read10: start %lx blocks %x\n", start
, blocks
);
1083 return ss
->transport(srb
, ss
);
1086 static int usb_write_10(struct scsi_cmd
*srb
, struct us_data
*ss
,
1087 unsigned long start
, unsigned short blocks
)
1089 memset(&srb
->cmd
[0], 0, 12);
1090 srb
->cmd
[0] = SCSI_WRITE10
;
1091 srb
->cmd
[1] = srb
->lun
<< 5;
1092 srb
->cmd
[2] = ((unsigned char) (start
>> 24)) & 0xff;
1093 srb
->cmd
[3] = ((unsigned char) (start
>> 16)) & 0xff;
1094 srb
->cmd
[4] = ((unsigned char) (start
>> 8)) & 0xff;
1095 srb
->cmd
[5] = ((unsigned char) (start
)) & 0xff;
1096 srb
->cmd
[7] = ((unsigned char) (blocks
>> 8)) & 0xff;
1097 srb
->cmd
[8] = (unsigned char) blocks
& 0xff;
1099 debug("write10: start %lx blocks %x\n", start
, blocks
);
1100 return ss
->transport(srb
, ss
);
1104 #ifdef CONFIG_USB_BIN_FIXUP
1106 * Some USB storage devices queried for SCSI identification data respond with
1107 * binary strings, which if output to the console freeze the terminal. The
1108 * workaround is to modify the vendor and product strings read from such
1109 * device with proper values (as reported by 'usb info').
1111 * Vendor and product length limits are taken from the definition of
1112 * struct blk_desc in include/part.h.
1114 static void usb_bin_fixup(struct usb_device_descriptor descriptor
,
1115 unsigned char vendor
[],
1116 unsigned char product
[]) {
1117 const unsigned char max_vendor_len
= 40;
1118 const unsigned char max_product_len
= 20;
1119 if (descriptor
.idVendor
== 0x0424 && descriptor
.idProduct
== 0x223a) {
1120 strncpy((char *)vendor
, "SMSC", max_vendor_len
);
1121 strncpy((char *)product
, "Flash Media Cntrller",
1125 #endif /* CONFIG_USB_BIN_FIXUP */
1127 #if CONFIG_IS_ENABLED(BLK)
1128 static unsigned long usb_stor_read(struct udevice
*dev
, lbaint_t blknr
,
1129 lbaint_t blkcnt
, void *buffer
)
1131 static unsigned long usb_stor_read(struct blk_desc
*block_dev
, lbaint_t blknr
,
1132 lbaint_t blkcnt
, void *buffer
)
1135 lbaint_t start
, blks
;
1137 unsigned short smallblks
;
1138 struct usb_device
*udev
;
1141 struct scsi_cmd
*srb
= &usb_ccb
;
1142 #if CONFIG_IS_ENABLED(BLK)
1143 struct blk_desc
*block_dev
;
1149 #if CONFIG_IS_ENABLED(BLK)
1150 block_dev
= dev_get_uclass_plat(dev
);
1151 udev
= dev_get_parent_priv(dev_get_parent(dev
));
1152 debug("\nusb_read: udev %d\n", block_dev
->devnum
);
1154 debug("\nusb_read: udev %d\n", block_dev
->devnum
);
1155 udev
= usb_dev_desc
[block_dev
->devnum
].priv
;
1157 debug("%s: No device\n", __func__
);
1161 ss
= (struct us_data
*)udev
->privptr
;
1163 usb_disable_asynch(1); /* asynch transfer not allowed */
1164 usb_lock_async(udev
, 1);
1165 srb
->lun
= block_dev
->lun
;
1166 buf_addr
= (uintptr_t)buffer
;
1170 debug("\nusb_read: dev %d startblk " LBAF
", blccnt " LBAF
" buffer %lx\n",
1171 block_dev
->devnum
, start
, blks
, buf_addr
);
1174 /* XXX need some comment here */
1176 srb
->pdata
= (unsigned char *)buf_addr
;
1177 if (blks
> ss
->max_xfer_blk
)
1178 smallblks
= ss
->max_xfer_blk
;
1180 smallblks
= (unsigned short) blks
;
1182 if (smallblks
== ss
->max_xfer_blk
)
1183 usb_show_progress();
1184 srb
->datalen
= block_dev
->blksz
* smallblks
;
1185 srb
->pdata
= (unsigned char *)buf_addr
;
1186 if (usb_read_10(srb
, ss
, start
, smallblks
)) {
1187 debug("Read ERROR\n");
1188 ss
->flags
&= ~USB_READY
;
1189 usb_request_sense(srb
, ss
);
1197 buf_addr
+= srb
->datalen
;
1198 } while (blks
!= 0);
1200 debug("usb_read: end startblk " LBAF
", blccnt %x buffer %lx\n",
1201 start
, smallblks
, buf_addr
);
1203 usb_lock_async(udev
, 0);
1204 usb_disable_asynch(0); /* asynch transfer allowed */
1205 if (blkcnt
>= ss
->max_xfer_blk
)
1210 #if CONFIG_IS_ENABLED(BLK)
1211 static unsigned long usb_stor_write(struct udevice
*dev
, lbaint_t blknr
,
1212 lbaint_t blkcnt
, const void *buffer
)
1214 static unsigned long usb_stor_write(struct blk_desc
*block_dev
, lbaint_t blknr
,
1215 lbaint_t blkcnt
, const void *buffer
)
1218 lbaint_t start
, blks
;
1220 unsigned short smallblks
;
1221 struct usb_device
*udev
;
1224 struct scsi_cmd
*srb
= &usb_ccb
;
1225 #if CONFIG_IS_ENABLED(BLK)
1226 struct blk_desc
*block_dev
;
1233 #if CONFIG_IS_ENABLED(BLK)
1234 block_dev
= dev_get_uclass_plat(dev
);
1235 udev
= dev_get_parent_priv(dev_get_parent(dev
));
1236 debug("\nusb_read: udev %d\n", block_dev
->devnum
);
1238 debug("\nusb_read: udev %d\n", block_dev
->devnum
);
1239 udev
= usb_dev_desc
[block_dev
->devnum
].priv
;
1241 debug("%s: No device\n", __func__
);
1245 ss
= (struct us_data
*)udev
->privptr
;
1247 usb_disable_asynch(1); /* asynch transfer not allowed */
1248 usb_lock_async(udev
, 1);
1250 srb
->lun
= block_dev
->lun
;
1251 buf_addr
= (uintptr_t)buffer
;
1255 debug("\nusb_write: dev %d startblk " LBAF
", blccnt " LBAF
" buffer %lx\n",
1256 block_dev
->devnum
, start
, blks
, buf_addr
);
1259 /* If write fails retry for max retry count else
1260 * return with number of blocks written successfully.
1263 srb
->pdata
= (unsigned char *)buf_addr
;
1264 if (blks
> ss
->max_xfer_blk
)
1265 smallblks
= ss
->max_xfer_blk
;
1267 smallblks
= (unsigned short) blks
;
1269 if (smallblks
== ss
->max_xfer_blk
)
1270 usb_show_progress();
1271 srb
->datalen
= block_dev
->blksz
* smallblks
;
1272 srb
->pdata
= (unsigned char *)buf_addr
;
1273 if (usb_write_10(srb
, ss
, start
, smallblks
)) {
1274 debug("Write ERROR\n");
1275 ss
->flags
&= ~USB_READY
;
1276 usb_request_sense(srb
, ss
);
1284 buf_addr
+= srb
->datalen
;
1285 } while (blks
!= 0);
1287 debug("usb_write: end startblk " LBAF
", blccnt %x buffer %lx\n",
1288 start
, smallblks
, buf_addr
);
1290 usb_lock_async(udev
, 0);
1291 usb_disable_asynch(0); /* asynch transfer allowed */
1292 if (blkcnt
>= ss
->max_xfer_blk
)
1298 /* Probe to see if a new device is actually a Storage device */
1299 int usb_storage_probe(struct usb_device
*dev
, unsigned int ifnum
,
1302 struct usb_interface
*iface
;
1304 struct usb_endpoint_descriptor
*ep_desc
;
1305 unsigned int flags
= 0;
1307 /* let's examine the device now */
1308 iface
= &dev
->config
.if_desc
[ifnum
];
1310 if (dev
->descriptor
.bDeviceClass
!= 0 ||
1311 iface
->desc
.bInterfaceClass
!= USB_CLASS_MASS_STORAGE
||
1312 iface
->desc
.bInterfaceSubClass
< US_SC_MIN
||
1313 iface
->desc
.bInterfaceSubClass
> US_SC_MAX
) {
1314 debug("Not mass storage\n");
1315 /* if it's not a mass storage, we go no further */
1319 memset(ss
, 0, sizeof(struct us_data
));
1321 /* At this point, we know we've got a live one */
1322 debug("\n\nUSB Mass Storage device detected\n");
1324 /* Initialize the us_data structure with some useful info */
1328 ss
->attention_done
= 0;
1329 ss
->subclass
= iface
->desc
.bInterfaceSubClass
;
1330 ss
->protocol
= iface
->desc
.bInterfaceProtocol
;
1332 /* set the handler pointers based on the protocol */
1333 debug("Transport: ");
1334 switch (ss
->protocol
) {
1336 debug("Control/Bulk\n");
1337 ss
->transport
= usb_stor_CB_transport
;
1338 ss
->transport_reset
= usb_stor_CB_reset
;
1342 debug("Control/Bulk/Interrupt\n");
1343 ss
->transport
= usb_stor_CB_transport
;
1344 ss
->transport_reset
= usb_stor_CB_reset
;
1347 debug("Bulk/Bulk/Bulk\n");
1348 ss
->transport
= usb_stor_BBB_transport
;
1349 ss
->transport_reset
= usb_stor_BBB_reset
;
1352 printf("USB Storage Transport unknown / not yet implemented\n");
1358 * We are expecting a minimum of 2 endpoints - in and out (bulk).
1359 * An optional interrupt is OK (necessary for CBI protocol).
1360 * We will ignore any others.
1362 for (i
= 0; i
< iface
->desc
.bNumEndpoints
; i
++) {
1363 ep_desc
= &iface
->ep_desc
[i
];
1364 /* is it an BULK endpoint? */
1365 if ((ep_desc
->bmAttributes
&
1366 USB_ENDPOINT_XFERTYPE_MASK
) == USB_ENDPOINT_XFER_BULK
) {
1367 if (ep_desc
->bEndpointAddress
& USB_DIR_IN
)
1368 ss
->ep_in
= ep_desc
->bEndpointAddress
&
1369 USB_ENDPOINT_NUMBER_MASK
;
1372 ep_desc
->bEndpointAddress
&
1373 USB_ENDPOINT_NUMBER_MASK
;
1376 /* is it an interrupt endpoint? */
1377 if ((ep_desc
->bmAttributes
&
1378 USB_ENDPOINT_XFERTYPE_MASK
) == USB_ENDPOINT_XFER_INT
) {
1379 ss
->ep_int
= ep_desc
->bEndpointAddress
&
1380 USB_ENDPOINT_NUMBER_MASK
;
1381 ss
->irqinterval
= ep_desc
->bInterval
;
1384 debug("Endpoints In %d Out %d Int %d\n",
1385 ss
->ep_in
, ss
->ep_out
, ss
->ep_int
);
1387 /* Do some basic sanity checks, and bail if we find a problem */
1388 if (usb_set_interface(dev
, iface
->desc
.bInterfaceNumber
, 0) ||
1389 !ss
->ep_in
|| !ss
->ep_out
||
1390 (ss
->protocol
== US_PR_CBI
&& ss
->ep_int
== 0)) {
1391 debug("Problems with device\n");
1394 /* set class specific stuff */
1395 /* We only handle certain protocols. Currently, these are
1397 * The SFF8070 accepts the requests used in u-boot
1399 if (ss
->subclass
!= US_SC_UFI
&& ss
->subclass
!= US_SC_SCSI
&&
1400 ss
->subclass
!= US_SC_8070
) {
1401 printf("Sorry, protocol %d not yet supported.\n", ss
->subclass
);
1405 /* we had found an interrupt endpoint, prepare irq pipe
1406 * set up the IRQ pipe and handler
1408 ss
->irqinterval
= (ss
->irqinterval
> 0) ? ss
->irqinterval
: 255;
1409 ss
->irqpipe
= usb_rcvintpipe(ss
->pusb_dev
, ss
->ep_int
);
1410 ss
->irqmaxp
= usb_maxpacket(dev
, ss
->irqpipe
);
1411 dev
->irq_handle
= usb_stor_irq
;
1414 /* Set the maximum transfer size per host controller setting */
1415 usb_stor_set_max_xfer_blk(dev
, ss
);
1417 dev
->privptr
= (void *)ss
;
1421 int usb_stor_get_info(struct usb_device
*dev
, struct us_data
*ss
,
1422 struct blk_desc
*dev_desc
)
1424 unsigned char perq
, modi
;
1425 ALLOC_CACHE_ALIGN_BUFFER(u32
, cap
, 2);
1426 ALLOC_CACHE_ALIGN_BUFFER(u8
, usb_stor_buf
, 36);
1427 u32 capacity
, blksz
;
1428 struct scsi_cmd
*pccb
= &usb_ccb
;
1430 pccb
->pdata
= usb_stor_buf
;
1432 dev_desc
->target
= dev
->devnum
;
1433 pccb
->lun
= dev_desc
->lun
;
1434 debug(" address %d\n", dev_desc
->target
);
1436 if (usb_inquiry(pccb
, ss
)) {
1437 debug("%s: usb_inquiry() failed\n", __func__
);
1441 perq
= usb_stor_buf
[0];
1442 modi
= usb_stor_buf
[1];
1445 * Skip unknown devices (0x1f) and enclosure service devices (0x0d),
1446 * they would not respond to test_unit_ready .
1448 if (((perq
& 0x1f) == 0x1f) || ((perq
& 0x1f) == 0x0d)) {
1449 debug("%s: unknown/unsupported device\n", __func__
);
1452 if ((modi
&0x80) == 0x80) {
1453 /* drive is removable */
1454 dev_desc
->removable
= 1;
1456 memcpy(dev_desc
->vendor
, (const void *)&usb_stor_buf
[8], 8);
1457 memcpy(dev_desc
->product
, (const void *)&usb_stor_buf
[16], 16);
1458 memcpy(dev_desc
->revision
, (const void *)&usb_stor_buf
[32], 4);
1459 dev_desc
->vendor
[8] = 0;
1460 dev_desc
->product
[16] = 0;
1461 dev_desc
->revision
[4] = 0;
1462 #ifdef CONFIG_USB_BIN_FIXUP
1463 usb_bin_fixup(dev
->descriptor
, (uchar
*)dev_desc
->vendor
,
1464 (uchar
*)dev_desc
->product
);
1465 #endif /* CONFIG_USB_BIN_FIXUP */
1466 debug("ISO Vers %X, Response Data %X\n", usb_stor_buf
[2],
1468 if (usb_test_unit_ready(pccb
, ss
)) {
1469 printf("Device NOT ready\n"
1470 " Request Sense returned %02X %02X %02X\n",
1471 pccb
->sense_buf
[2], pccb
->sense_buf
[12],
1472 pccb
->sense_buf
[13]);
1473 if (dev_desc
->removable
== 1)
1474 dev_desc
->type
= perq
;
1477 pccb
->pdata
= (unsigned char *)cap
;
1478 memset(pccb
->pdata
, 0, 8);
1479 if (usb_read_capacity(pccb
, ss
) != 0) {
1480 printf("READ_CAP ERROR\n");
1481 ss
->flags
&= ~USB_READY
;
1485 debug("Read Capacity returns: 0x%08x, 0x%08x\n", cap
[0], cap
[1]);
1487 if (cap
[0] > (0x200000 * 10)) /* greater than 10 GByte */
1490 cap
[0] = cpu_to_be32(cap
[0]);
1491 cap
[1] = cpu_to_be32(cap
[1]);
1494 capacity
= be32_to_cpu(cap
[0]) + 1;
1495 blksz
= be32_to_cpu(cap
[1]);
1497 debug("Capacity = 0x%08x, blocksz = 0x%08x\n", capacity
, blksz
);
1498 dev_desc
->lba
= capacity
;
1499 dev_desc
->blksz
= blksz
;
1500 dev_desc
->log2blksz
= LOG2(dev_desc
->blksz
);
1501 dev_desc
->type
= perq
;
1502 debug(" address %d\n", dev_desc
->target
);
1507 #if CONFIG_IS_ENABLED(DM_USB)
1509 static int usb_mass_storage_probe(struct udevice
*dev
)
1511 struct usb_device
*udev
= dev_get_parent_priv(dev
);
1514 usb_disable_asynch(1); /* asynch transfer not allowed */
1515 ret
= usb_stor_probe_device(udev
);
1516 usb_disable_asynch(0); /* asynch transfer allowed */
1521 static const struct udevice_id usb_mass_storage_ids
[] = {
1522 { .compatible
= "usb-mass-storage" },
1526 U_BOOT_DRIVER(usb_mass_storage
) = {
1527 .name
= "usb_mass_storage",
1528 .id
= UCLASS_MASS_STORAGE
,
1529 .of_match
= usb_mass_storage_ids
,
1530 .probe
= usb_mass_storage_probe
,
1531 #if CONFIG_IS_ENABLED(BLK)
1532 .plat_auto
= sizeof(struct us_data
),
1536 UCLASS_DRIVER(usb_mass_storage
) = {
1537 .id
= UCLASS_MASS_STORAGE
,
1538 .name
= "usb_mass_storage",
1541 static const struct usb_device_id mass_storage_id_table
[] = {
1543 .match_flags
= USB_DEVICE_ID_MATCH_INT_CLASS
,
1544 .bInterfaceClass
= USB_CLASS_MASS_STORAGE
1546 { } /* Terminating entry */
1549 U_BOOT_USB_DEVICE(usb_mass_storage
, mass_storage_id_table
);
1552 #if CONFIG_IS_ENABLED(BLK)
1553 static const struct blk_ops usb_storage_ops
= {
1554 .read
= usb_stor_read
,
1555 .write
= usb_stor_write
,
1558 U_BOOT_DRIVER(usb_storage_blk
) = {
1559 .name
= "usb_storage_blk",
1561 .ops
= &usb_storage_ops
,
1564 U_BOOT_LEGACY_BLK(usb
) = {
1565 .if_typename
= "usb",
1566 .if_type
= IF_TYPE_USB
,
1567 .max_devs
= USB_MAX_STOR_DEV
,
1568 .desc
= usb_dev_desc
,