configs/iconnect_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT=y
   3 CONFIG_SYS_DCACHE_OFF=y
   4 CONFIG_ARCH_CPU_INIT=y
   5 CONFIG_SYS_THUMB_BUILD=y
   6 CONFIG_ARCH_KIRKWOOD=y
   7 CONFIG_SUPPORT_PASSING_ATAGS=y
   8 CONFIG_CMDLINE_TAG=y
   9 CONFIG_INITRD_TAG=y
  10 CONFIG_SYS_KWD_CONFIG="board/iomega/iconnect/kwbimage.cfg"
  11 CONFIG_TEXT_BASE=0x600000
  12 CONFIG_NR_DRAM_BANKS=2
  13 CONFIG_TARGET_ICONNECT=y
  14 CONFIG_ENV_SIZE=0x20000
  15 CONFIG_ENV_OFFSET=0x80000
  16 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-iconnect"
  17 CONFIG_IDENT_STRING=" Iomega iConnect"
  18 CONFIG_SYS_LOAD_ADDR=0x800000
  19 CONFIG_PCI=y
  20 CONFIG_BOOTDELAY=3
  21 CONFIG_USE_BOOTCOMMAND=y
  22 CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part rootfs; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; bootm 0x800000"
  23 CONFIG_USE_PREBOOT=y
  24 CONFIG_SYS_PBSIZE=1051
  25 # CONFIG_DISPLAY_BOARDINFO is not set
  26 CONFIG_BOARD_LATE_INIT=y
  27 CONFIG_HUSH_PARSER=y
  28 CONFIG_SYS_PROMPT="iConnect> "
  29 CONFIG_SYS_MAXARGS=32
  30 CONFIG_CMD_NAND=y
  31 CONFIG_CMD_PCI=y
  32 CONFIG_CMD_USB=y
  33 # CONFIG_CMD_SETEXPR is not set
  34 CONFIG_CMD_MII=y
  35 CONFIG_CMD_PING=y
  36 CONFIG_CMD_EXT2=y
  37 CONFIG_CMD_FAT=y
  38 CONFIG_CMD_JFFS2=y
  39 CONFIG_CMD_MTDPARTS=y
  40 CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
  41 CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x80000@0x0(uboot),0x20000@0x80000(uboot_env),-@0xa0000(rootfs)"
  42 CONFIG_CMD_UBI=y
  43 CONFIG_ISO_PARTITION=y
  44 CONFIG_OF_CONTROL=y
  45 CONFIG_ENV_OVERWRITE=y
  46 CONFIG_ENV_IS_IN_NAND=y
  47 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  48 CONFIG_NET_RANDOM_ETHADDR=y
  49 CONFIG_NETCONSOLE=y
  50 CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
  51 # CONFIG_MMC is not set
  52 CONFIG_MTD=y
  53 CONFIG_MTD_RAW_NAND=y
  54 CONFIG_PHY_MARVELL=y
  55 CONFIG_MVGBE=y
  56 CONFIG_MII=y
  57 CONFIG_PCI_MVEBU=y
  58 CONFIG_USB=y
  59 CONFIG_USB_EHCI_HCD=y
  60 CONFIG_USB_STORAGE=y
  61 CONFIG_LZMA=y
  62 CONFIG_BZIP2=y