configs/trimslice_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SYS_HAS_NONCACHED_MEMORY=y
   3 CONFIG_SYS_L2CACHE_OFF=y
   4 CONFIG_ARCH_TEGRA=y
   5 CONFIG_TEXT_BASE=0x00110000
   6 CONFIG_NR_DRAM_BANKS=2
   7 CONFIG_ENV_SIZE=0x2000
   8 CONFIG_ENV_OFFSET=0xFE000
   9 CONFIG_ENV_SECT_SIZE=0x2000
  10 CONFIG_DEFAULT_DEVICE_TREE="tegra20-trimslice"
  11 CONFIG_SPL_TEXT_BASE=0x00108000
  12 CONFIG_SPL_STACK=0xffffc
  13 CONFIG_TEGRA20=y
  14 CONFIG_TARGET_TRIMSLICE=y
  15 CONFIG_SYS_LOAD_ADDR=0x1000000
  16 CONFIG_PCI=y
  17 CONFIG_OF_SYSTEM_SETUP=y
  18 CONFIG_SYS_PBSIZE=2087
  19 CONFIG_CONSOLE_MUX=y
  20 CONFIG_SYS_STDIO_DEREGISTER=y
  21 CONFIG_SPL_FOOTPRINT_LIMIT=y
  22 CONFIG_SPL_MAX_FOOTPRINT=0x8000
  23 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
  24 CONFIG_SPL_SYS_MALLOC=y
  25 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
  26 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000
  27 CONFIG_SPL_SYS_MALLOC_SIZE=0x10000
  28 CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # "
  29 # CONFIG_CMD_IMI is not set
  30 CONFIG_CMD_GPIO=y
  31 CONFIG_CMD_I2C=y
  32 CONFIG_CMD_MMC=y
  33 CONFIG_CMD_PCI=y
  34 CONFIG_CMD_SPI=y
  35 CONFIG_CMD_USB=y
  36 # CONFIG_CMD_SETEXPR is not set
  37 CONFIG_CMD_EXT4_WRITE=y
  38 # CONFIG_SPL_DOS_PARTITION is not set
  39 # CONFIG_SPL_EFI_PARTITION is not set
  40 CONFIG_ENV_OVERWRITE=y
  41 CONFIG_ENV_IS_IN_SPI_FLASH=y
  42 CONFIG_ENV_SPI_MAX_HZ=48000000
  43 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  44 CONFIG_SYS_I2C_TEGRA=y
  45 CONFIG_SPI_FLASH_WINBOND=y
  46 CONFIG_RTL8169=y
  47 CONFIG_PCI_TEGRA=y
  48 CONFIG_SYS_NS16550=y
  49 CONFIG_TEGRA20_SFLASH=y
  50 CONFIG_USB=y
  51 CONFIG_USB_EHCI_HCD=y
  52 CONFIG_USB_EHCI_TEGRA=y
  53 CONFIG_USB_HOST_ETHER=y
  54 CONFIG_USB_ETHER_ASIX=y