drivers/ata/Kconfig

   1 config AHCI
   2         bool "Support SATA controllers with driver model"
   3         depends on DM
   4         help
   5           This enables a uclass for disk controllers in U-Boot. Various driver
   6           types can use this, such as AHCI/SATA. It does not provide any standard
   7           operations at present. The block device interface has not been converted
   8           to driver model.
   9
  10 config SATA
  11         bool "Support SATA controllers"
  12         select HAVE_BLOCK_DEVICE
  13         help
  14           This enables support for SATA (Serial Advanced Technology
  15           Attachment), a serial bus standard for connecting to hard drives and
  16           other storage devices.
  17
  18           SATA replaces PATA (originally just ATA), which stands for Parallel AT
  19           Attachment, where AT refers to an IBM AT (Advanced Technology)
  20           computer released in 1984.
  21
  22           See also CMD_SATA which provides command-line support.
  23
  24 config LIBATA
  25         bool
  26         help
  27           Select this to build and link the libata helper functions.
  28
  29 config SCSI_AHCI
  30         bool "Enable SCSI interface to SATA devices"
  31         select LIBATA
  32         help
  33           Enable this to allow interfacing SATA devices via the SCSI layer.
  34
  35 menu "SATA/SCSI device support"
  36
  37 config AHCI_PCI
  38         bool "Support for PCI-based AHCI controller"
  39         depends on DM_SCSI
  40         help
  41           Enables support for the PCI-based AHCI controller.
  42
  43 config SATA_CEVA
  44         bool "Ceva Sata controller"
  45         depends on AHCI
  46         depends on DM_SCSI
  47         help
  48           This option enables Ceva Sata controller hard IP available on Xilinx
  49           ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and
  50           AHCI 1.3 specifications with hot-plug detect feature.
  51
  52
  53 config DWC_AHCI
  54         bool "Enable Synopsys DWC AHCI driver support"
  55         select SCSI_AHCI
  56         select PHY
  57         depends on DM_SCSI
  58         help
  59           Enable this driver to support Sata devices through
  60           Synopsys DWC AHCI module.
  61
  62 config DWC_AHSATA
  63         bool "Enable DWC AHSATA driver support"
  64         select LIBATA
  65         help
  66           Enable this driver to support the DWC AHSATA SATA controller found
  67           in i.MX5 and i.MX6 SoCs.
  68
  69 config FSL_SATA
  70         bool "Enable Freescale SATA controller driver support"
  71         select LIBATA
  72         help
  73           Enable this driver to support the SATA controller found in
  74           some Freescale PowerPC SoCs.
  75
  76 config MVSATA_IDE
  77         bool "Enable Marvell SATA controller driver support via IDE interface"
  78         help
  79           Enable this driver to support the SATA controller found in
  80           some Marvell SoCs, running in IDE compatibility mode using PIO.
  81
  82 config SATA_MV
  83         bool "Enable Marvell SATA controller driver support"
  84         select AHCI
  85         select LIBATA
  86         depends on BLK
  87         help
  88           Enable this driver to support the SATA controller found in
  89           some Marvell SoCs.
  90
  91 config SATA_SIL
  92         bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support"
  93         select LIBATA
  94         help
  95           Enable this driver to support the SIL3131, SIL3132 and SIL3124
  96           SATA controllers.
  97
  98 config SATA_SIL3114
  99         bool "Enable Silicon Image SIL3114 SATA driver support"
 100         select LIBATA
 101         help
 102           Enable this driver to support the SIL3114 SATA controllers.
 103
 104 config SUNXI_AHCI
 105         bool "Enable Allwinner SATA driver support"
 106         depends on AHCI
 107         default y if ARCH_SUNXI
 108         help
 109           Enable this driver to support the SATA controllers found in the
 110           Allwinner A10, A20 and R40 SoCs.
 111
 112 config AHCI_MVEBU
 113         bool "Marvell EBU AHCI SATA support"
 114         depends on ARCH_MVEBU
 115         depends on AHCI
 116         select SCSI_AHCI
 117         select DM_SCSI
 118         help
 119           This option enables support for the Marvell EBU SoC's
 120           onboard AHCI SATA.
 121
 122           If unsure, say N.
 123 endmenu