drivers/phy/Kconfig

   1
   2 menu "PHY Subsystem"
   3
   4 config PHY
   5         bool "PHY Core"
   6         depends on DM
   7         help
   8           PHY support.
   9
  10           This framework is designed to provide a generic interface for PHY
  11           devices. PHY devices are dedicated hardware that handle the physical
  12           layer of the protocols in the OSI model.
  13           PHYs are commonly used for high speed interfaces such as Serial-ATA
  14           or PCI express.
  15           The API provides functions to initialize/deinitialize the
  16           PHY, power on/off the PHY, and reset the PHY. It's meant to be as
  17           compatible as possible with the equivalent framework found in the
  18           linux kernel.
  19
  20 config SPL_PHY
  21         bool "PHY Core in SPL"
  22         depends on DM && SPL
  23         help
  24           PHY support in SPL.
  25
  26           This framework is designed to provide a generic interface for PHY
  27           devices. PHY devices are dedicated hardware that handle the physical
  28           layer of the protocols (https://en.wikipedia.org/wiki/OSI_model).
  29           PHYs are commonly used for high speed interfaces such as Serial-ATA
  30           or PCI express.
  31           The API provides functions to initialize/deinitialize the
  32           PHY, power on/off the PHY, and reset the PHY. It's meant to be as
  33           compatible as possible with the equivalent framework found in the
  34           linux kernel.
  35
  36 config PHY_SANDBOX
  37         bool "Sandbox PHY support"
  38         depends on SANDBOX
  39         depends on PHY
  40         help
  41           This select a dummy sandbox PHY driver. It used only to implement
  42           the unit tests for the phy framework
  43
  44 config NOP_PHY
  45         bool "NOP PHY driver"
  46         depends on PHY
  47         help
  48           Support for a no-op PHY driver (stubbed PHY driver).
  49
  50           This is useful when a driver uses the PHY framework but no real PHY
  51           hardware exists.
  52
  53 config SPL_NOP_PHY
  54         bool "NOP PHY driver in SPL"
  55         depends on SPL_PHY
  56         help
  57           Support for a no-op PHY driver (stubbed PHY driver) in the SPL.
  58
  59           This is useful when a driver uses the PHY framework but no real PHY
  60           hardware exists.
  61
  62 config MIPI_DPHY_HELPERS
  63         bool "MIPI D-PHY support helpers"
  64         help
  65           Provides a number of helpers a core functions for MIPI D-PHY drivers.
  66
  67 config AB8500_USB_PHY
  68         bool "AB8500 USB PHY Driver"
  69         depends on PHY && PMIC_AB8500
  70         help
  71           Support for the USB OTG PHY in ST-Ericsson AB8500.
  72
  73 config APPLE_ATCPHY
  74        bool "Apple Type-C PHY Driver"
  75        depends on PHY && ARCH_APPLE
  76        default y
  77        help
  78          Support for the Apple Type-C PHY.
  79
  80          This is a dummy driver since the PHY is initialized
  81          sufficiently by previous stage firmware.
  82
  83 config BCM6318_USBH_PHY
  84         bool "BCM6318 USBH PHY support"
  85         depends on PHY && ARCH_BMIPS
  86         select POWER_DOMAIN
  87         help
  88           Support for the Broadcom MIPS BCM6318 USBH PHY.
  89
  90 config BCM6348_USBH_PHY
  91         bool "BCM6348 USBH PHY support"
  92         depends on PHY && ARCH_BMIPS
  93         help
  94           Support for the Broadcom MIPS BCM6348 USBH PHY.
  95
  96 config BCM6358_USBH_PHY
  97         bool "BCM6358 USBH PHY support"
  98         depends on PHY && ARCH_BMIPS
  99         help
 100           Support for the Broadcom MIPS BCM6358 USBH PHY.
 101
 102 config BCM6368_USBH_PHY
 103         bool "BCM6368 USBH PHY support"
 104         depends on PHY && ARCH_BMIPS
 105         help
 106           Support for the Broadcom MIPS BCM6368 USBH PHY.
 107
 108 config BCM_SR_PCIE_PHY
 109         bool "Broadcom Stingray PCIe PHY driver"
 110         depends on PHY
 111         help
 112           Enable this to support the Broadcom Stingray PCIe PHY
 113           If unsure, say N.
 114
 115 config PHY_DA8XX_USB
 116         tristate "TI DA8xx USB PHY Driver"
 117         depends on PHY && ARCH_DAVINCI
 118         help
 119           Enable this to support the USB PHY on DA8xx SoCs.
 120
 121 config PIPE3_PHY
 122         bool "Support omap's PIPE3 PHY"
 123         depends on PHY && ARCH_OMAP2PLUS
 124         help
 125           Support for the omap PIPE3 phy for sata
 126
 127           This PHY is found on omap devices supporting SATA such as dra7, am57x
 128           and omap5
 129
 130 config SPL_PIPE3_PHY
 131         bool "Support omap's PIPE3 PHY in SPL"
 132         depends on SPL_PHY && ARCH_OMAP2PLUS
 133         help
 134           Support for the omap PIPE3 phy for sata in SPL
 135
 136           This PHY is found on omap devices supporting SATA such as dra7, am57x
 137           and omap5
 138
 139 config AM654_PHY
 140         tristate "TI AM654 SERDES support"
 141         depends on PHY && ARCH_K3
 142         select REGMAP
 143         select SYSCON
 144         help
 145           This option enables support for TI AM654 SerDes PHY used for
 146           PCIe.
 147
 148 config STI_USB_PHY
 149         bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
 150         depends on PHY && ARCH_STI
 151         help
 152           This is the generic phy driver for the picoPHY ports
 153           used by USB2 and USB3 Host controllers available on
 154           STiH407 SoC families.
 155
 156 config PHY_RCAR_GEN2
 157         tristate "Renesas R-Car Gen2 USB PHY"
 158         depends on PHY && RCAR_GEN2
 159         help
 160           Support for the Renesas R-Car Gen2 USB PHY. This driver operates the
 161           PHY connected to USBHS module, PCI EHCI module and USB3.0 module and
 162           allows configuring the module multiplexing.
 163
 164 config PHY_RCAR_GEN3
 165         tristate "Renesas R-Car Gen3 USB PHY"
 166         depends on PHY && RCAR_GEN3 && CLK && DM_REGULATOR
 167         default y if RCAR_GEN3
 168         help
 169           Support for the Renesas R-Car Gen3 USB PHY. This driver operates the
 170           PHY connected to EHCI USB module and controls USB OTG operation.
 171
 172 config PHY_STM32_USBPHYC
 173         tristate "STMicroelectronics STM32 SoC USB HS PHY driver"
 174         depends on PHY && ARCH_STM32MP
 175         help
 176           Enable this to support the High-Speed USB transceiver that is part of
 177           STMicroelectronics STM32 SoCs.
 178
 179           This driver controls the entire USB PHY block: the USB PHY controller
 180           (USBPHYC) and the two 8-bit wide UTMI+ interface. First interface is
 181           used by an HS USB Host controller, and the second one is shared
 182           between an HS USB OTG controller and an HS USB Host controller,
 183           selected by an USB switch.
 184
 185 config MESON_GXBB_USB_PHY
 186         bool "Amlogic Meson GXBB USB PHY"
 187         depends on PHY && ARCH_MESON && MESON_GXBB
 188         imply REGMAP
 189         help
 190           This is the generic phy driver for the Amlogic Meson GXBB
 191           USB2 PHY.
 192
 193 config MESON_GXL_USB_PHY
 194         bool "Amlogic Meson GXL USB PHYs"
 195         depends on PHY && ARCH_MESON && (MESON_GXL || MESON_GXM || MESON_AXG)
 196         imply REGMAP
 197         help
 198           This is the generic phy driver for the Amlogic Meson GXL
 199           USB2 and USB3 PHYS.
 200
 201 config MESON_G12A_USB_PHY
 202         bool "Amlogic Meson G12A USB PHYs"
 203         depends on PHY && ARCH_MESON && (MESON_G12A || MESON_A1)
 204         imply REGMAP
 205         help
 206           This is the generic phy driver for the Amlogic Meson G12A
 207           USB2 and USB3 PHYS.
 208
 209 config MESON_AXG_MIPI_DPHY
 210         bool "Amlogic Meson AXG MIPI D-PHY"
 211         depends on PHY && ARCH_MESON && MESON_AXG
 212         select MIPI_DPHY_HELPERS
 213         imply REGMAP
 214         help
 215           This is the generic phy driver for the Amlogic Meson AXG
 216           MIPI D-PHY.
 217
 218 config MESON_AXG_MIPI_PCIE_ANALOG_PHY
 219         bool "Amlogic Meson AXG MIPI PCIe Analog PHY"
 220         depends on PHY && ARCH_MESON && MESON_AXG
 221         select MIPI_DPHY_HELPERS
 222         imply REGMAP
 223         help
 224           This is the generic phy driver for the Amlogic Meson AXG
 225           MIPI PCIe Analog PHY.
 226
 227 config OMAP_USB2_PHY
 228         bool "Support OMAP's USB2 PHY"
 229         depends on PHY
 230         depends on SYSCON
 231         help
 232           Support for the OMAP's USB2 PHY.
 233
 234           This PHY is found on OMAP devices supporting USB2.
 235
 236
 237 config KEYSTONE_USB_PHY
 238         bool "Support TI Keystone USB PHY"
 239         depends on PHY
 240         depends on ARCH_KEYSTONE
 241         help
 242           Support for the USB PHY found on some Keystone (k2) processors
 243
 244           This PHY is found on some Keystone (K2) devices supporting USB.
 245
 246 config MT7620_USB_PHY
 247         bool "MediaTek MT7620 USB PHY support"
 248         depends on PHY
 249         depends on SOC_MT7620
 250         help
 251           Support the intergated USB PHY in MediaTek MT7620 SoC
 252
 253 config MT76X8_USB_PHY
 254         bool "MediaTek MT76x8 (7628/88) USB PHY support"
 255         depends on PHY
 256         depends on SOC_MT7628
 257         help
 258           Support the USB PHY in MT76x8 SoCs
 259
 260           This PHY is found on MT76x8 devices supporting USB.
 261
 262 config PHY_MTK_TPHY
 263         bool "MediaTek T-PHY Driver"
 264         depends on PHY
 265         depends on ARCH_MEDIATEK || SOC_MT7621
 266         help
 267           MediaTek T-PHY driver supports usb2.0, usb3.0 ports, PCIe and
 268           SATA, and meanwhile supports two version T-PHY which have
 269           different banks layout, the T-PHY with shared banks between
 270           multi-ports is first version, otherwise is second veriosn,
 271           so you can easily distinguish them by banks layout.
 272
 273 config PHY_NPCM_USB
 274         bool "Nuvoton NPCM USB PHY support"
 275         depends on PHY
 276         depends on ARCH_NPCM
 277         help
 278           Support the USB PHY in NPCM SoCs
 279
 280 config PHY_IMX8MQ_USB
 281         bool "NXP i.MX8MQ/i.MX8MP USB PHY Driver"
 282         depends on PHY
 283         depends on IMX8MQ || IMX8MP
 284         help
 285           Support the USB3.0 PHY in NXP i.MX8MQ or i.MX8MP SoC
 286
 287 config PHY_IMX8M_PCIE
 288         bool "NXP i.MX8MM/i.MX8MP PCIe PHY Driver"
 289         depends on PHY
 290         depends on IMX8MM || IMX8MP
 291         select REGMAP
 292         select SYSCON
 293         help
 294           Support the PCIe PHY in NXP i.MX8MM or i.MX8MP SoC
 295
 296           This PHY is found on i.MX8M devices supporting PCIe.
 297
 298 config PHY_XILINX_ZYNQMP
 299         tristate "Xilinx ZynqMP PHY driver"
 300         depends on PHY && ARCH_ZYNQMP
 301         help
 302           Enable this to support ZynqMP High Speed Gigabit Transceiver
 303           that is part of ZynqMP SoC.
 304
 305 source "drivers/phy/rockchip/Kconfig"
 306 source "drivers/phy/cadence/Kconfig"
 307 source "drivers/phy/ti/Kconfig"
 308 source "drivers/phy/qcom/Kconfig"
 309 source "drivers/phy/renesas/Kconfig"
 310
 311 endmenu