include/configs/am3517_evm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * am3517_evm.h - Default configuration for AM3517 EVM board.
   4  *
   5  * Author: Vaibhav Hiremath <hvaibhav@ti.com>
   6  *
   7  * Based on omap3_evm_config.h
   8  *
   9  * Copyright (C) 2010 Texas Instruments Incorporated
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include <configs/ti_omap3_common.h>
  16
  17 #undef CONFIG_DM_I2C_COMPAT
  18 #define CONFIG_REVISION_TAG
  19
  20 /* Hardware drivers */
  21
  22 /* allow to overwrite serial and ethaddr */
  23 #define CONFIG_ENV_OVERWRITE
  24
  25 /*
  26  * USB configuration
  27  * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
  28  * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
  29  */
  30
  31 #ifdef CONFIG_USB_MUSB_AM35X
  32
  33 #ifdef CONFIG_USB_MUSB_HOST
  34
  35 #ifdef CONFIG_USB_KEYBOARD
  36 #define CONFIG_PREBOOT "usb start"
  37 #endif /* CONFIG_USB_KEYBOARD */
  38
  39 #endif /* CONFIG_USB_MUSB_HOST */
  40
  41 #endif /* CONFIG_USB_MUSB_AM35X */
  42
  43 /* I2C */
  44
  45 /* Ethernet */
  46 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
  47 #define CONFIG_BOOTP_DEFAULT
  48 #define CONFIG_BOOTP_DNS2
  49 #define CONFIG_BOOTP_SEND_HOSTNAME
  50 #define CONFIG_NET_RETRY_COUNT          10
  51
  52 /* Board NAND Info. */
  53 #ifdef CONFIG_NAND
  54 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  55 #define CONFIG_SYS_NAND_PAGE_COUNT      64
  56 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
  57 #define CONFIG_SYS_NAND_OOBSIZE         64
  58 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
  59 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
  60 #define CONFIG_SYS_NAND_ECCPOS          { 2,  3,  4,  5,  6,  7,  8,  9, 10, \
  61                                          11, 12, 13, 14, 16, 17, 18, 19, 20, \
  62                                          21, 22, 23, 24, 25, 26, 27, 28, 30, \
  63                                          31, 32, 33, 34, 35, 36, 37, 38, 39, \
  64                                          40, 41, 42, 44, 45, 46, 47, 48, 49, \
  65                                          50, 51, 52, 53, 54, 55, 56 }
  66
  67 #define CONFIG_SYS_NAND_ECCSIZE         512
  68 #define CONFIG_SYS_NAND_ECCBYTES        13
  69 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
  70 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
  71 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
  72 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  73 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
  74 /* NAND block size is 128 KiB.  Synchronize these values with
  75  * corresponding Device Tree entries in Linux:
  76  *  MLO(SPL)             4 * NAND_BLOCK_SIZE = 512 KiB  @ 0x000000
  77  *  U-Boot              15 * NAND_BLOCK_SIZE = 1920 KiB @ 0x080000
  78  *  U-Boot environment   2 * NAND_BLOCK_SIZE = 256 KiB  @ 0x260000
  79  *  Kernel              64 * NAND_BLOCK_SIZE = 8 MiB    @ 0x2A0000
  80  *  DTB                  4 * NAND_BLOCK_SIZE = 512 KiB  @ 0xAA0000
  81  *  RootFS              Remaining Flash Space           @ 0xB20000
  82  */
  83 #endif /* CONFIG_NAND */
  84
  85 /* Environment information */
  86
  87 #define CONFIG_BOOTFILE         "uImage"
  88
  89 #define CONFIG_EXTRA_ENV_SETTINGS \
  90         "loadaddr=0x82000000\0" \
  91         "console=ttyS2,115200n8\0" \
  92         "fdtfile=am3517-evm.dtb\0" \
  93         "fdtaddr=0x82C00000\0" \
  94         "vram=16M\0" \
  95         "bootenv=uEnv.txt\0" \
  96         "cmdline=\0" \
  97         "optargs=\0" \
  98         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
  99         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 100         "mmcdev=0\0" \
 101         "mmcpart=1\0" \
 102         "mmcroot=/dev/mmcblk0p2 rw\0" \
 103         "mmcrootfstype=ext4 rootwait fixrtc\0" \
 104         "mmcargs=setenv bootargs console=${console} " \
 105                 "${mtdparts} " \
 106                 "${optargs} " \
 107                 "root=${mmcroot} " \
 108                 "rootfstype=${mmcrootfstype} " \
 109                 "${cmdline}\0" \
 110         "nandargs=setenv bootargs console=${console} " \
 111                 "${mtdparts} " \
 112                 "${optargs} " \
 113                 "root=ubi0:rootfs rw ubi.mtd=rootfs " \
 114                 "rootfstype=ubifs rootwait " \
 115                 "${cmdline}\0" \
 116         "loadbootenv=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootenv}\0"\
 117         "importbootenv=echo Importing environment from mmc ...; " \
 118                 "env import -t ${loadaddr} ${filesize}\0" \
 119         "bootscript=echo Running bootscript from mmc ...; " \
 120                 "source ${loadaddr}\0" \
 121         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootfile}\0" \
 122         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdtaddr} ${fdtfile}\0" \
 123         "mmcboot=echo Booting from mmc ...; " \
 124                 "run mmcargs; " \
 125                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 126         "nandboot=echo Booting from nand ...; " \
 127                 "run nandargs; " \
 128                 "nand read ${loadaddr} 2a0000 800000; " \
 129                 "nand read ${fdtaddr} aa0000 80000; " \
 130                 "bootm ${loadaddr} - ${fdtaddr}\0" \
 131
 132 #define CONFIG_BOOTCOMMAND \
 133         "mmc dev ${mmcdev}; if mmc rescan; then " \
 134                 "echo SD/MMC found on device $mmcdev; " \
 135                 "if run loadbootenv; then " \
 136                         "run importbootenv; " \
 137                 "fi; " \
 138                 "echo Checking if uenvcmd is set ...; " \
 139                 "if test -n $uenvcmd; then " \
 140                         "echo Running uenvcmd ...; " \
 141                         "run uenvcmd; " \
 142                 "fi; " \
 143                 "echo Running default loadimage ...; " \
 144                 "setenv bootfile zImage; " \
 145                 "if run loadimage; then " \
 146                         "run loadfdt; " \
 147                         "run mmcboot; " \
 148                 "fi; " \
 149         "else run nandboot; fi"
 150
 151 /* Miscellaneous configurable options */
 152
 153 /* We set the max number of command args high to avoid HUSH bugs. */
 154 #define CONFIG_SYS_MAXARGS              64
 155
 156 /* Print Buffer Size */
 157 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE \
 158                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
 159 /* Boot Argument Buffer Size */
 160 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 161
 162 /* memtest works on */
 163 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 164 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 165                                         0x01F00000) /* 31MB */
 166
 167 /* Physical Memory Map */
 168 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
 169
 170 /* FLASH and environment organization */
 171
 172 /* **** PISMO SUPPORT *** */
 173 #define CONFIG_SYS_MAX_FLASH_SECT       520     /* max number of sectors */
 174                                                 /* on one chip */
 175 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of flash banks */
 176 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 177
 178 #if defined(CONFIG_NAND)
 179 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 180 #endif
 181
 182 /* Monitor at start of flash */
 183 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 184
 185 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 186 #define CONFIG_ENV_SIZE                 CONFIG_SYS_ENV_SECT_SIZE
 187 #define CONFIG_ENV_OFFSET               0x260000
 188 #define CONFIG_ENV_ADDR                 0x260000
 189
 190 /* Defines for SPL */
 191 #undef CONFIG_SPL_TEXT_BASE
 192 #define CONFIG_SPL_TEXT_BASE            0x40200000
 193
 194 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 195 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 196
 197 #define CONFIG_SPL_NAND_BASE
 198 #define CONFIG_SPL_NAND_DRIVERS
 199 #define CONFIG_SPL_NAND_ECC
 200
 201 #endif /* __CONFIG_H */