include/configs/sunxi-common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
   4  *
   5  * (C) Copyright 2007-2011
   6  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
   7  * Tom Cubie <tangliang@allwinnertech.com>
   8  *
   9  * Configuration settings for the Allwinner sunxi series of boards.
  10  */
  11
  12 #ifndef _SUNXI_COMMON_CONFIG_H
  13 #define _SUNXI_COMMON_CONFIG_H
  14
  15 #include <asm/arch/cpu.h>
  16 #include <linux/stringify.h>
  17
  18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
  19 /*
  20  * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
  21  * expense of restricting some features, so the regular machine id values can
  22  * be used.
  23  */
  24 # define CONFIG_MACH_TYPE_COMPAT_REV    0
  25 #else
  26 /*
  27  * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
  28  * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
  29  * beyond the machine id check.
  30  */
  31 # define CONFIG_MACH_TYPE_COMPAT_REV    1
  32 #endif
  33
  34 #ifdef CONFIG_ARM64
  35 #define CONFIG_SYS_BOOTM_LEN            (32 << 20)
  36 #endif
  37
  38 /* Serial & console */
  39 #define CONFIG_SYS_NS16550_SERIAL
  40 /* ns16550 reg in the low bits of cpu reg */
  41 #define CONFIG_SYS_NS16550_CLK          24000000
  42 #ifndef CONFIG_DM_SERIAL
  43 # define CONFIG_SYS_NS16550_REG_SIZE    -4
  44 # define CONFIG_SYS_NS16550_COM1                SUNXI_UART0_BASE
  45 # define CONFIG_SYS_NS16550_COM2                SUNXI_UART1_BASE
  46 # define CONFIG_SYS_NS16550_COM3                SUNXI_UART2_BASE
  47 # define CONFIG_SYS_NS16550_COM4                SUNXI_UART3_BASE
  48 # define CONFIG_SYS_NS16550_COM5                SUNXI_R_UART_BASE
  49 #endif
  50
  51 /* CPU */
  52 #define COUNTER_FREQUENCY               24000000
  53
  54 /*
  55  * The DRAM Base differs between some models. We cannot use macros for the
  56  * CONFIG_FOO defines which contain the DRAM base address since they end
  57  * up unexpanded in include/autoconf.mk .
  58  *
  59  * So we have to have this #ifdef #else #endif block for these.
  60  */
  61 #ifdef CONFIG_MACH_SUN9I
  62 #define SDRAM_OFFSET(x) 0x2##x
  63 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  64 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* default load address */
  65 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  66  * since it needs to fit in with the other values. By also #defining it
  67  * we get warnings if the Kconfig value mismatches. */
  68 #define CONFIG_SPL_STACK_R_ADDR         0x2fe00000
  69 #define CONFIG_SPL_BSS_START_ADDR       0x2ff80000
  70 #else
  71 #define SDRAM_OFFSET(x) 0x4##x
  72 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  73 #define CONFIG_SYS_LOAD_ADDR            0x42000000 /* default load address */
  74 /* V3s do not have enough memory to place code at 0x4a000000 */
  75 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  76  * since it needs to fit in with the other values. By also #defining it
  77  * we get warnings if the Kconfig value mismatches. */
  78 #define CONFIG_SPL_STACK_R_ADDR         0x4fe00000
  79 #define CONFIG_SPL_BSS_START_ADDR       0x4ff80000
  80 #endif
  81
  82 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000 /* 512 KiB */
  83
  84 /*
  85  * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
  86  * slightly bigger. Note that it is possible to map the first 32 KiB of the
  87  * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
  88  * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
  89  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  90  * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register
  91  * is known yet.
  92  * H6 has SRAM A1 at 0x00020000.
  93  */
  94 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SUNXI_SRAM_ADDRESS
  95 /* FIXME: this may be larger on some SoCs */
  96 #define CONFIG_SYS_INIT_RAM_SIZE        0x8000 /* 32 KiB */
  97
  98 #define CONFIG_SYS_INIT_SP_OFFSET \
  99         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 100 #define CONFIG_SYS_INIT_SP_ADDR \
 101         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 102
 103 #define PHYS_SDRAM_0                    CONFIG_SYS_SDRAM_BASE
 104 #define PHYS_SDRAM_0_SIZE               0x80000000 /* 2 GiB */
 105
 106 #ifdef CONFIG_AHCI
 107 #define CONFIG_SYS_64BIT_LBA
 108 #endif
 109
 110 #define CONFIG_SETUP_MEMORY_TAGS
 111 #define CONFIG_CMDLINE_TAG
 112 #define CONFIG_INITRD_TAG
 113 #define CONFIG_SERIAL_TAG
 114
 115 #ifdef CONFIG_NAND_SUNXI
 116 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
 117 #define CONFIG_SYS_NAND_ONFI_DETECTION
 118 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 119 #endif
 120
 121 #ifdef CONFIG_SPL_SPI_SUNXI
 122 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 123 #endif
 124
 125 /* mmc config */
 126 #ifdef CONFIG_MMC
 127 #define CONFIG_MMC_SUNXI_SLOT           0
 128 #endif
 129
 130 #if defined(CONFIG_ENV_IS_IN_MMC)
 131
 132 #ifdef CONFIG_ARM64
 133 /*
 134  * This is actually (CONFIG_ENV_OFFSET -
 135  * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
 136  * directly in a makefile, without the preprocessor expansion.
 137  */
 138 #define CONFIG_BOARD_SIZE_LIMIT         0x7e000
 139 #endif
 140
 141 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 142 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */
 143 #define CONFIG_SYS_MMC_ENV_DEV          1
 144 #else
 145 /* Otherwise, use the only device we have */
 146 #define CONFIG_SYS_MMC_ENV_DEV          0
 147 #endif
 148 #define CONFIG_SYS_MMC_MAX_DEVICE       4
 149 #endif
 150
 151 #ifndef CONFIG_MACH_SUN8I_V3S
 152 /* 64MB of malloc() pool */
 153 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (64 << 20))
 154 #else
 155 /* 2MB of malloc() pool */
 156 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (2 << 20))
 157 #endif
 158
 159 /*
 160  * Miscellaneous configurable options
 161  */
 162 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 163 #define CONFIG_SYS_PBSIZE       1024    /* Print Buffer Size */
 164
 165 /* standalone support */
 166 #define CONFIG_STANDALONE_LOAD_ADDR     CONFIG_SYS_LOAD_ADDR
 167
 168 /* FLASH and environment organization */
 169
 170 #define CONFIG_SYS_MONITOR_LEN          (768 << 10)     /* 768 KiB */
 171
 172 #ifndef CONFIG_ARM64            /* AArch64 FEL support is not ready yet */
 173 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 174 #endif
 175
 176 /*
 177  * We cannot use expressions here, because expressions won't be evaluated in
 178  * autoconf.mk.
 179  */
 180 #if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000
 181 #define CONFIG_SPL_TEXT_BASE            0x10060         /* sram start+header */
 182 #define CONFIG_SPL_MAX_SIZE             0x7fa0          /* 32 KiB */
 183 #ifdef CONFIG_ARM64
 184 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
 185 #define LOW_LEVEL_SRAM_STACK            0x00054000
 186 #else
 187 #define LOW_LEVEL_SRAM_STACK            0x00018000
 188 #endif /* !CONFIG_ARM64 */
 189 #elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000
 190 #define CONFIG_SPL_TEXT_BASE            0x20060         /* sram start+header */
 191 #define CONFIG_SPL_MAX_SIZE             0x7fa0          /* 32 KiB */
 192 /* end of SRAM A2 on H6 for now */
 193 #define LOW_LEVEL_SRAM_STACK            0x00118000
 194 #else
 195 #define CONFIG_SPL_TEXT_BASE            0x60            /* sram start+header */
 196 #define CONFIG_SPL_MAX_SIZE             0x5fa0          /* 24KB on sun4i/sun7i */
 197 #define LOW_LEVEL_SRAM_STACK            0x00008000      /* End of sram */
 198 #endif
 199
 200 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 201
 202 #define CONFIG_SPL_PAD_TO               32768           /* decimal for 'dd' */
 203
 204
 205 /* I2C */
 206 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 207     defined CONFIG_SY8106A_POWER
 208 #endif
 209
 210 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
 211     defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
 212     defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
 213 #define CONFIG_SYS_I2C_MVTWSI
 214 #ifndef CONFIG_DM_I2C
 215 #define CONFIG_SYS_I2C
 216 #define CONFIG_SYS_I2C_SPEED            400000
 217 #define CONFIG_SYS_I2C_SLAVE            0x7f
 218 #endif
 219 #endif
 220
 221 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 222 #define CONFIG_SYS_I2C_SOFT
 223 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 224 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 225 /* We use pin names in Kconfig and sunxi_name_to_gpio() */
 226 #define CONFIG_SOFT_I2C_GPIO_SDA        soft_i2c_gpio_sda
 227 #define CONFIG_SOFT_I2C_GPIO_SCL        soft_i2c_gpio_scl
 228 #ifndef __ASSEMBLY__
 229 extern int soft_i2c_gpio_sda;
 230 extern int soft_i2c_gpio_scl;
 231 #endif
 232 #define CONFIG_VIDEO_LCD_I2C_BUS        0 /* The lcd panel soft i2c is bus 0 */
 233 #define CONFIG_SYS_SPD_BUS_NUM          1 /* And the axp209 i2c bus is bus 1 */
 234 #else
 235 #define CONFIG_SYS_SPD_BUS_NUM          0 /* The axp209 i2c bus is bus 0 */
 236 #define CONFIG_VIDEO_LCD_I2C_BUS        -1 /* NA, but necessary to compile */
 237 #endif
 238
 239 /* PMU */
 240 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
 241     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
 242     defined CONFIG_SY8106A_POWER
 243 #endif
 244
 245 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 246 #if CONFIG_CONS_INDEX == 1
 247 #ifdef CONFIG_MACH_SUN9I
 248 #define OF_STDOUT_PATH          "/soc/serial@07000000:115200"
 249 #else
 250 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28000:115200"
 251 #endif
 252 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
 253 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28400:115200"
 254 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
 255 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01c28800:115200"
 256 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
 257 #define OF_STDOUT_PATH          "/soc@01c00000/serial@01f02800:115200"
 258 #else
 259 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
 260 #endif
 261 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */
 262
 263 /* GPIO */
 264 #define CONFIG_SUNXI_GPIO
 265
 266 #ifdef CONFIG_VIDEO_SUNXI
 267 /*
 268  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
 269  * to use as framebuffer. This must be a multiple of 4096.
 270  */
 271 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 272
 273 #define CONFIG_VIDEO_LOGO
 274 #define CONFIG_VIDEO_STD_TIMINGS
 275 #define CONFIG_I2C_EDID
 276 #define VIDEO_LINE_LEN (pGD->plnSizeX)
 277
 278 /* allow both serial and cfb console. */
 279 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 280
 281 #endif /* CONFIG_VIDEO_SUNXI */
 282
 283 /* Ethernet support */
 284
 285 #ifdef CONFIG_SUN7I_GMAC
 286 #define CONFIG_PHY_REALTEK
 287 #endif
 288
 289 #ifdef CONFIG_USB_EHCI_HCD
 290 #define CONFIG_USB_OHCI_NEW
 291 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 292 #endif
 293
 294 #ifdef CONFIG_USB_KEYBOARD
 295 #define CONFIG_PREBOOT
 296 #endif
 297
 298 #ifndef CONFIG_SPL_BUILD
 299
 300 #ifdef CONFIG_ARM64
 301 /*
 302  * Boards seem to come with at least 512MB of DRAM.
 303  * The kernel should go at 512K, which is the default text offset (that will
 304  * be adjusted at runtime if needed).
 305  * There is no compression for arm64 kernels (yet), so leave some space
 306  * for really big kernels, say 256MB for now.
 307  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
 308  * Align the initrd to a 2MB page.
 309  */
 310 #define BOOTM_SIZE      __stringify(0xa000000)
 311 #define KERNEL_ADDR_R   __stringify(SDRAM_OFFSET(0080000))
 312 #define FDT_ADDR_R      __stringify(SDRAM_OFFSET(FA00000))
 313 #define SCRIPT_ADDR_R   __stringify(SDRAM_OFFSET(FC00000))
 314 #define PXEFILE_ADDR_R  __stringify(SDRAM_OFFSET(FD00000))
 315 #define RAMDISK_ADDR_R  __stringify(SDRAM_OFFSET(FE00000))
 316
 317 #else
 318 /*
 319  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
 320  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
 321  * 1M script, 1M pxe and the ramdisk at the end.
 322  */
 323 #ifndef CONFIG_MACH_SUN8I_V3S
 324 #define BOOTM_SIZE     __stringify(0xa000000)
 325 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 326 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 327 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 328 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 329 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
 330 #else
 331 /*
 332  * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
 333  * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
 334  * 1M script, 1M pxe and the ramdisk at the end.
 335  */
 336 #define BOOTM_SIZE     __stringify(0x2e00000)
 337 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
 338 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
 339 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
 340 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
 341 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
 342 #endif
 343 #endif
 344
 345 #define MEM_LAYOUT_ENV_SETTINGS \
 346         "bootm_size=" BOOTM_SIZE "\0" \
 347         "kernel_addr_r=" KERNEL_ADDR_R "\0" \
 348         "fdt_addr_r=" FDT_ADDR_R "\0" \
 349         "scriptaddr=" SCRIPT_ADDR_R "\0" \
 350         "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
 351         "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
 352
 353 #define DFU_ALT_INFO_RAM \
 354         "dfu_alt_info_ram=" \
 355         "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
 356         "fdt ram " FDT_ADDR_R " 0x100000;" \
 357         "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
 358
 359 #ifdef CONFIG_MMC
 360 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 361 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance)              \
 362         BOOTENV_DEV_MMC(MMC, mmc, 0)                                    \
 363         BOOTENV_DEV_MMC(MMC, mmc, 1)                                    \
 364         "bootcmd_mmc_auto="                                             \
 365                 "if test ${mmc_bootdev} -eq 1; then "                   \
 366                         "run bootcmd_mmc1; "                            \
 367                         "run bootcmd_mmc0; "                            \
 368                 "elif test ${mmc_bootdev} -eq 0; then "                 \
 369                         "run bootcmd_mmc0; "                            \
 370                         "run bootcmd_mmc1; "                            \
 371                 "fi\0"
 372
 373 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
 374         "mmc_auto "
 375
 376 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
 377 #else
 378 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 379 #endif
 380 #else
 381 #define BOOT_TARGET_DEVICES_MMC(func)
 382 #endif
 383
 384 #ifdef CONFIG_AHCI
 385 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
 386 #else
 387 #define BOOT_TARGET_DEVICES_SCSI(func)
 388 #endif
 389
 390 #ifdef CONFIG_USB_STORAGE
 391 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 392 #else
 393 #define BOOT_TARGET_DEVICES_USB(func)
 394 #endif
 395
 396 /* FEL boot support, auto-execute boot.scr if a script address was provided */
 397 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
 398         "bootcmd_fel=" \
 399                 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \
 400                         "echo '(FEL boot)'; " \
 401                         "source ${fel_scriptaddr}; " \
 402                 "fi\0"
 403 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
 404         "fel "
 405
 406 #define BOOT_TARGET_DEVICES(func) \
 407         func(FEL, fel, na) \
 408         BOOT_TARGET_DEVICES_MMC(func) \
 409         BOOT_TARGET_DEVICES_SCSI(func) \
 410         BOOT_TARGET_DEVICES_USB(func) \
 411         func(PXE, pxe, na) \
 412         func(DHCP, dhcp, na)
 413
 414 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
 415 #define BOOTCMD_SUNXI_COMPAT \
 416         "bootcmd_sunxi_compat=" \
 417                 "setenv root /dev/mmcblk0p3 rootwait; " \
 418                 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
 419                         "echo Loaded environment from uEnv.txt; " \
 420                         "env import -t 0x44000000 ${filesize}; " \
 421                 "fi; " \
 422                 "setenv bootargs console=${console} root=${root} ${extraargs}; " \
 423                 "ext2load mmc 0 0x43000000 script.bin && " \
 424                 "ext2load mmc 0 0x48000000 uImage && " \
 425                 "bootm 0x48000000\0"
 426 #else
 427 #define BOOTCMD_SUNXI_COMPAT
 428 #endif
 429
 430 #include <config_distro_bootcmd.h>
 431
 432 #ifdef CONFIG_USB_KEYBOARD
 433 #define CONSOLE_STDIN_SETTINGS \
 434         "preboot=usb start\0" \
 435         "stdin=serial,usbkbd\0"
 436 #else
 437 #define CONSOLE_STDIN_SETTINGS \
 438         "stdin=serial\0"
 439 #endif
 440
 441 #ifdef CONFIG_VIDEO
 442 #define CONSOLE_STDOUT_SETTINGS \
 443         "stdout=serial,vga\0" \
 444         "stderr=serial,vga\0"
 445 #elif CONFIG_DM_VIDEO
 446 #define CONFIG_SYS_WHITE_ON_BLACK
 447 #define CONSOLE_STDOUT_SETTINGS \
 448         "stdout=serial,vidconsole\0" \
 449         "stderr=serial,vidconsole\0"
 450 #else
 451 #define CONSOLE_STDOUT_SETTINGS \
 452         "stdout=serial\0" \
 453         "stderr=serial\0"
 454 #endif
 455
 456 #ifdef CONFIG_MTDIDS_DEFAULT
 457 #define SUNXI_MTDIDS_DEFAULT \
 458         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"
 459 #else
 460 #define SUNXI_MTDIDS_DEFAULT
 461 #endif
 462
 463 #ifdef CONFIG_MTDPARTS_DEFAULT
 464 #define SUNXI_MTDPARTS_DEFAULT \
 465         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
 466 #else
 467 #define SUNXI_MTDPARTS_DEFAULT
 468 #endif
 469
 470 #define PARTS_DEFAULT \
 471         "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
 472         "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
 473         "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
 474         "name=system,size=-,uuid=${uuid_gpt_system};"
 475
 476 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
 477
 478 #ifdef CONFIG_ARM64
 479 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
 480 #else
 481 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
 482 #endif
 483
 484 #define CONSOLE_ENV_SETTINGS \
 485         CONSOLE_STDIN_SETTINGS \
 486         CONSOLE_STDOUT_SETTINGS
 487
 488 #ifdef CONFIG_ARM64
 489 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 490 #else
 491 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
 492 #endif
 493
 494 #define CONFIG_EXTRA_ENV_SETTINGS \
 495         CONSOLE_ENV_SETTINGS \
 496         MEM_LAYOUT_ENV_SETTINGS \
 497         DFU_ALT_INFO_RAM \
 498         "fdtfile=" FDTFILE "\0" \
 499         "console=ttyS0,115200\0" \
 500         SUNXI_MTDIDS_DEFAULT \
 501         SUNXI_MTDPARTS_DEFAULT \
 502         "uuid_gpt_esp=" UUID_GPT_ESP "\0" \
 503         "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
 504         "partitions=" PARTS_DEFAULT "\0" \
 505         BOOTCMD_SUNXI_COMPAT \
 506         BOOTENV
 507
 508 #else /* ifndef CONFIG_SPL_BUILD */
 509 #define CONFIG_EXTRA_ENV_SETTINGS
 510 #endif
 511
 512 #endif /* _SUNXI_COMMON_CONFIG_H */