src/arm/marvell/kirkwood-6281.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 / {
   3         mbus@f1000000 {
   4                 pciec: pcie@82000000 {
   5                         compatible = "marvell,kirkwood-pcie";
   6                         status = "disabled";
   7                         device_type = "pci";
   8
   9                         #address-cells = <3>;
  10                         #size-cells = <2>;
  11
  12                         bus-range = <0x00 0xff>;
  13
  14                         ranges =
  15                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
  16                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
  17                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
  18
  19                         pcie0: pcie@1,0 {
  20                                 device_type = "pci";
  21                                 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
  22                                 reg = <0x0800 0 0 0 0>;
  23                                 #address-cells = <3>;
  24                                 #size-cells = <2>;
  25                                 #interrupt-cells = <1>;
  26                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
  27                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
  28                                 bus-range = <0x00 0xff>;
  29                                 interrupt-names = "intx", "error";
  30                                 interrupts = <9>, <44>;
  31                                 interrupt-map-mask = <0 0 0 7>;
  32                                 interrupt-map = <0 0 0 1 &pcie_intc 0>,
  33                                                 <0 0 0 2 &pcie_intc 1>,
  34                                                 <0 0 0 3 &pcie_intc 2>,
  35                                                 <0 0 0 4 &pcie_intc 3>;
  36                                 marvell,pcie-port = <0>;
  37                                 marvell,pcie-lane = <0>;
  38                                 clocks = <&gate_clk 2>;
  39                                 status = "disabled";
  40
  41                                 pcie_intc: interrupt-controller {
  42                                         interrupt-controller;
  43                                         #interrupt-cells = <1>;
  44                                 };
  45                         };
  46                 };
  47         };
  48
  49         ocp@f1000000 {
  50                 pinctrl: pin-controller@10000 {
  51                         compatible = "marvell,88f6281-pinctrl";
  52
  53                         pmx_sata0: pmx-sata0 {
  54                                 marvell,pins = "mpp5", "mpp21", "mpp23";
  55                                 marvell,function = "sata0";
  56                         };
  57                         pmx_sata1: pmx-sata1 {
  58                                 marvell,pins = "mpp4", "mpp20", "mpp22";
  59                                 marvell,function = "sata1";
  60                         };
  61                         pmx_sdio: pmx-sdio {
  62                                 marvell,pins = "mpp12", "mpp13", "mpp14",
  63                                                "mpp15", "mpp16", "mpp17";
  64                                 marvell,function = "sdio";
  65                         };
  66                 };
  67
  68                 rtc: rtc@10300 {
  69                         compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
  70                         reg = <0x10300 0x20>;
  71                         interrupts = <53>;
  72                         clocks = <&gate_clk 7>;
  73                 };
  74
  75                 sata: sata@80000 {
  76                         compatible = "marvell,orion-sata";
  77                         reg = <0x80000 0x5000>;
  78                         interrupts = <21>;
  79                         clocks = <&gate_clk 14>, <&gate_clk 15>;
  80                         clock-names = "0", "1";
  81                         phys = <&sata_phy0>, <&sata_phy1>;
  82                         phy-names = "port0", "port1";
  83                         status = "disabled";
  84                 };
  85
  86                 sdio: mvsdio@90000 {
  87                         compatible = "marvell,orion-sdio";
  88                         reg = <0x90000 0x200>;
  89                         interrupts = <28>;
  90                         clocks = <&gate_clk 4>;
  91                         pinctrl-0 = <&pmx_sdio>;
  92                         pinctrl-names = "default";
  93                         bus-width = <4>;
  94                         cap-sdio-irq;
  95                         cap-sd-highspeed;
  96                         cap-mmc-highspeed;
  97                         status = "disabled";
  98                 };
  99         };
 100 };