src/arm/nxp/vf/vf610-zii-spb4.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2
   3 /*
   4  * Device tree file for ZII's SPB4 board
   5  *
   6  * SPB - Seat Power Box
   7  *
   8  * Copyright (C) 2019 Zodiac Inflight Innovations
   9  */
  10
  11 /dts-v1/;
  12 #include "vf610.dtsi"
  13
  14 / {
  15         model = "ZII VF610 SPB4 Board";
  16         compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610";
  17
  18         chosen {
  19                 stdout-path = &uart0;
  20         };
  21
  22         memory@80000000 {
  23                 device_type = "memory";
  24                 reg = <0x80000000 0x20000000>;
  25         };
  26
  27         gpio-leds {
  28                 compatible = "gpio-leds";
  29                 pinctrl-0 = <&pinctrl_leds_debug>;
  30                 pinctrl-names = "default";
  31
  32                 led-debug {
  33                         label = "zii:green:debug1";
  34                         gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
  35                         linux,default-trigger = "heartbeat";
  36                 };
  37         };
  38
  39         reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
  40                 compatible = "regulator-fixed";
  41                 regulator-name = "vcc_3v3_mcu";
  42                 regulator-min-microvolt = <3300000>;
  43                 regulator-max-microvolt = <3300000>;
  44         };
  45
  46         supply-voltage-monitor {
  47                 compatible = "iio-hwmon";
  48                 io-channels = <&adc0 8>, /* 28V_SW   */
  49                               <&adc0 9>, /* +3.3V    */
  50                               <&adc1 8>, /* VCC_1V5  */
  51                               <&adc1 9>; /* VCC_1V2  */
  52         };
  53 };
  54
  55 &adc0 {
  56         vref-supply = <&reg_vcc_3v3_mcu>;
  57         status = "okay";
  58 };
  59
  60 &adc1 {
  61         vref-supply = <&reg_vcc_3v3_mcu>;
  62         status = "okay";
  63 };
  64
  65 &dspi1 {
  66         bus-num = <1>;
  67         pinctrl-names = "default";
  68         pinctrl-0 = <&pinctrl_dspi1>;
  69         status = "okay";
  70
  71         flash@0 {
  72                 #address-cells = <1>;
  73                 #size-cells = <1>;
  74                 compatible = "m25p128", "jedec,spi-nor";
  75                 reg = <0>;
  76                 spi-max-frequency = <50000000>;
  77         };
  78 };
  79
  80 &edma0 {
  81         status = "okay";
  82 };
  83
  84 &edma1 {
  85         status = "okay";
  86 };
  87
  88 &esdhc0 {
  89         pinctrl-names = "default";
  90         pinctrl-0 = <&pinctrl_esdhc0>;
  91         bus-width = <8>;
  92         non-removable;
  93         no-1-8-v;
  94         keep-power-in-suspend;
  95         no-sdio;
  96         no-sd;
  97         status = "okay";
  98 };
  99
 100 &esdhc1 {
 101         pinctrl-names = "default";
 102         pinctrl-0 = <&pinctrl_esdhc1>;
 103         bus-width = <4>;
 104         no-sdio;
 105         status = "okay";
 106 };
 107
 108 &fec1 {
 109         phy-mode = "rmii";
 110         pinctrl-names = "default";
 111         pinctrl-0 = <&pinctrl_fec1>;
 112         status = "okay";
 113
 114         fixed-link {
 115                 speed = <100>;
 116                 full-duplex;
 117         };
 118
 119         mdio1: mdio {
 120                 #address-cells = <1>;
 121                 #size-cells = <0>;
 122                 clock-frequency = <12500000>;
 123                 suppress-preamble;
 124                 status = "okay";
 125
 126                 switch0: switch0@0 {
 127                         compatible = "marvell,mv88e6190";
 128                         pinctrl-0 = <&pinctrl_gpio_switch0>;
 129                         pinctrl-names = "default";
 130                         reg = <0>;
 131                         eeprom-length = <65536>;
 132                         interrupt-parent = <&gpio3>;
 133                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 134                         interrupt-controller;
 135                         #interrupt-cells = <2>;
 136
 137                         ports {
 138                                 #address-cells = <1>;
 139                                 #size-cells = <0>;
 140
 141                                 port@0 {
 142                                         reg = <0>;
 143                                         phy-mode = "rmii";
 144                                         ethernet = <&fec1>;
 145
 146                                         fixed-link {
 147                                                 speed = <100>;
 148                                                 full-duplex;
 149                                         };
 150                                 };
 151
 152                                 port@1 {
 153                                         reg = <1>;
 154                                         label = "eth_cu_1000_1";
 155                                 };
 156
 157                                 port@2 {
 158                                         reg = <2>;
 159                                         label = "eth_cu_1000_2";
 160                                 };
 161
 162                                 port@3 {
 163                                         reg = <3>;
 164                                         label = "eth_cu_1000_3";
 165                                 };
 166
 167                                 port@4 {
 168                                         reg = <4>;
 169                                         label = "eth_cu_1000_4";
 170                                 };
 171
 172                                 port@5 {
 173                                         reg = <5>;
 174                                         label = "eth_cu_1000_5";
 175                                 };
 176
 177                                 port@6 {
 178                                         reg = <6>;
 179                                         label = "eth_cu_1000_6";
 180                                 };
 181                         };
 182                 };
 183         };
 184 };
 185
 186 &i2c0 {
 187         clock-frequency = <100000>;
 188         pinctrl-names = "default";
 189         pinctrl-0 = <&pinctrl_i2c0>;
 190         status = "okay";
 191
 192         io-expander@22 {
 193                 compatible = "nxp,pca9554";
 194                 reg = <0x22>;
 195                 gpio-controller;
 196                 #gpio-cells = <2>;
 197         };
 198
 199         eeprom@50 {
 200                 compatible = "atmel,24c04";
 201                 reg = <0x50>;
 202                 label = "nameplate";
 203         };
 204
 205         eeprom@52 {
 206                 compatible = "atmel,24c04";
 207                 reg = <0x52>;
 208         };
 209 };
 210
 211 &i2c1 {
 212         clock-frequency = <100000>;
 213         pinctrl-names = "default";
 214         pinctrl-0 = <&pinctrl_i2c1>;
 215         status = "okay";
 216
 217         watchdog@38 {
 218                 compatible = "zii,rave-wdt";
 219                 reg = <0x38>;
 220         };
 221 };
 222
 223 &snvsrtc {
 224         status = "disabled";
 225 };
 226
 227 &uart0 {
 228         pinctrl-names = "default";
 229         pinctrl-0 = <&pinctrl_uart0>;
 230         status = "okay";
 231 };
 232
 233 &uart1 {
 234         pinctrl-names = "default";
 235         pinctrl-0 = <&pinctrl_uart1>;
 236         status = "okay";
 237 };
 238
 239 &uart2 {
 240         pinctrl-names = "default";
 241         pinctrl-0 = <&pinctrl_uart2>;
 242         status = "okay";
 243
 244         mcu {
 245                 compatible = "zii,rave-sp-rdu2";
 246                 current-speed = <1000000>;
 247                 #address-cells = <1>;
 248                 #size-cells = <1>;
 249
 250                 watchdog {
 251                         compatible = "zii,rave-sp-watchdog";
 252                 };
 253
 254                 eeprom@a3 {
 255                         compatible = "zii,rave-sp-eeprom";
 256                         reg = <0xa3 0x4000>;
 257                         #address-cells = <1>;
 258                         #size-cells = <1>;
 259                         zii,eeprom-name = "main-eeprom";
 260                 };
 261         };
 262 };
 263
 264 &uart3 {
 265         pinctrl-names = "default";
 266         pinctrl-0 = <&pinctrl_uart3>;
 267         status = "okay";
 268 };
 269
 270 &wdoga5 {
 271        status = "disabled";
 272 };
 273
 274 &iomuxc {
 275         pinctrl_dspi1: dspi1grp {
 276                 fsl,pins = <
 277                         VF610_PAD_PTD5__DSPI1_CS0               0x1182
 278                         VF610_PAD_PTD4__DSPI1_CS1               0x1182
 279                         VF610_PAD_PTC6__DSPI1_SIN               0x1181
 280                         VF610_PAD_PTC7__DSPI1_SOUT              0x1182
 281                         VF610_PAD_PTC8__DSPI1_SCK               0x1182
 282                 >;
 283         };
 284
 285         pinctrl_esdhc0: esdhc0grp {
 286                 fsl,pins = <
 287                         VF610_PAD_PTC0__ESDHC0_CLK              0x31ef
 288                         VF610_PAD_PTC1__ESDHC0_CMD              0x31ef
 289                         VF610_PAD_PTC2__ESDHC0_DAT0             0x31ef
 290                         VF610_PAD_PTC3__ESDHC0_DAT1             0x31ef
 291                         VF610_PAD_PTC4__ESDHC0_DAT2             0x31ef
 292                         VF610_PAD_PTC5__ESDHC0_DAT3             0x31ef
 293                         VF610_PAD_PTD23__ESDHC0_DAT4            0x31ef
 294                         VF610_PAD_PTD22__ESDHC0_DAT5            0x31ef
 295                         VF610_PAD_PTD21__ESDHC0_DAT6            0x31ef
 296                         VF610_PAD_PTD20__ESDHC0_DAT7            0x31ef
 297                 >;
 298         };
 299
 300         pinctrl_esdhc1: esdhc1grp {
 301                 fsl,pins = <
 302                         VF610_PAD_PTA24__ESDHC1_CLK             0x31ef
 303                         VF610_PAD_PTA25__ESDHC1_CMD             0x31ef
 304                         VF610_PAD_PTA26__ESDHC1_DAT0            0x31ef
 305                         VF610_PAD_PTA27__ESDHC1_DAT1            0x31ef
 306                         VF610_PAD_PTA28__ESDHC1_DATA2           0x31ef
 307                         VF610_PAD_PTA29__ESDHC1_DAT3            0x31ef
 308                 >;
 309         };
 310
 311         pinctrl_fec1: fec1grp {
 312                 fsl,pins = <
 313                         VF610_PAD_PTA6__RMII_CLKIN              0x30d1
 314                         VF610_PAD_PTC9__ENET_RMII1_MDC          0x30d2
 315                         VF610_PAD_PTC10__ENET_RMII1_MDIO        0x30d3
 316                         VF610_PAD_PTC11__ENET_RMII1_CRS         0x30d1
 317                         VF610_PAD_PTC12__ENET_RMII1_RXD1        0x30d1
 318                         VF610_PAD_PTC13__ENET_RMII1_RXD0        0x30d1
 319                         VF610_PAD_PTC14__ENET_RMII1_RXER        0x30d1
 320                         VF610_PAD_PTC15__ENET_RMII1_TXD1        0x30d2
 321                         VF610_PAD_PTC16__ENET_RMII1_TXD0        0x30d2
 322                         VF610_PAD_PTC17__ENET_RMII1_TXEN        0x30d2
 323                 >;
 324         };
 325
 326         pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
 327                 fsl,pins = <
 328                         VF610_PAD_PTB28__GPIO_98                0x219d
 329                 >;
 330         };
 331
 332         pinctrl_i2c0: i2c0grp {
 333                 fsl,pins = <
 334                         VF610_PAD_PTB14__I2C0_SCL               0x37ff
 335                         VF610_PAD_PTB15__I2C0_SDA               0x37ff
 336                 >;
 337         };
 338
 339         pinctrl_i2c1: i2c1grp {
 340                 fsl,pins = <
 341                         VF610_PAD_PTB16__I2C1_SCL               0x37ff
 342                         VF610_PAD_PTB17__I2C1_SDA               0x37ff
 343                 >;
 344         };
 345
 346         pinctrl_leds_debug: pinctrl-leds-debug {
 347                 fsl,pins = <
 348                         VF610_PAD_PTD3__GPIO_82                 0x31c2
 349                 >;
 350         };
 351
 352         pinctrl_uart0: uart0grp {
 353                 fsl,pins = <
 354                         VF610_PAD_PTB10__UART0_TX               0x21a2
 355                         VF610_PAD_PTB11__UART0_RX               0x21a1
 356                 >;
 357         };
 358
 359         pinctrl_uart1: uart1grp {
 360                 fsl,pins = <
 361                         VF610_PAD_PTB23__UART1_TX               0x21a2
 362                         VF610_PAD_PTB24__UART1_RX               0x21a1
 363                 >;
 364         };
 365
 366         pinctrl_uart2: uart2grp {
 367                 fsl,pins = <
 368                         VF610_PAD_PTD0__UART2_TX                0x21a2
 369                         VF610_PAD_PTD1__UART2_RX                0x21a1
 370                 >;
 371         };
 372
 373         pinctrl_uart3: uart3grp {
 374                 fsl,pins = <
 375                         VF610_PAD_PTA30__UART3_TX               0x21a2
 376                         VF610_PAD_PTA31__UART3_RX               0x21a1
 377                 >;
 378         };
 379 };