src/arm/renesas/r8a7742-iwg21m.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the iWave RZ/G1H Qseven SOM
   4  *
   5  * Copyright (C) 2020 Renesas Electronics Corp.
   6  */
   7
   8 #include "r8a7742.dtsi"
   9 #include <dt-bindings/gpio/gpio.h>
  10
  11 / {
  12         compatible = "iwave,g21m", "renesas,r8a7742";
  13
  14         memory@40000000 {
  15                 device_type = "memory";
  16                 reg = <0 0x40000000 0 0x40000000>;
  17         };
  18
  19         memory@200000000 {
  20                 device_type = "memory";
  21                 reg = <2 0x00000000 0 0x40000000>;
  22         };
  23
  24         reg_3p3v: 3p3v {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "3P3V";
  27                 regulator-min-microvolt = <3300000>;
  28                 regulator-max-microvolt = <3300000>;
  29                 regulator-always-on;
  30                 regulator-boot-on;
  31         };
  32 };
  33
  34 &extal_clk {
  35         clock-frequency = <20000000>;
  36 };
  37
  38 &gpio0 {
  39         /* GP0_18 set low to select QSPI. Doing so will disable VIN2 */
  40         qspi-en-hog {
  41                 gpio-hog;
  42                 gpios = <18 GPIO_ACTIVE_HIGH>;
  43                 output-low;
  44                 line-name = "QSPI_EN";
  45         };
  46 };
  47
  48 &i2c0 {
  49         pinctrl-0 = <&i2c0_pins>;
  50         pinctrl-names = "default";
  51
  52         status = "okay";
  53         clock-frequency = <400000>;
  54
  55         rtc@68 {
  56                 compatible = "ti,bq32000";
  57                 reg = <0x68>;
  58                 interrupt-parent = <&gpio1>;
  59                 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
  60         };
  61 };
  62
  63 &mmcif1 {
  64         pinctrl-0 = <&mmc1_pins>;
  65         pinctrl-names = "default";
  66
  67         vmmc-supply = <&reg_3p3v>;
  68         bus-width = <4>;
  69         non-removable;
  70         status = "okay";
  71 };
  72
  73 &pfc {
  74         i2c0_pins: i2c0 {
  75                 groups = "i2c0";
  76                 function = "i2c0";
  77         };
  78
  79         mmc1_pins: mmc1 {
  80                 groups = "mmc1_data4", "mmc1_ctrl";
  81                 function = "mmc1";
  82         };
  83
  84         qspi_pins: qspi {
  85                 groups = "qspi_ctrl", "qspi_data2";
  86                 function = "qspi";
  87         };
  88 };
  89
  90 &qspi {
  91         pinctrl-0 = <&qspi_pins>;
  92         pinctrl-names = "default";
  93
  94         status = "okay";
  95
  96         flash: flash@0 {
  97                 compatible = "sst,sst25vf016b", "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <50000000>;
 100                 m25p,fast-read;
 101                 spi-cpol;
 102                 spi-cpha;
 103
 104                 partitions {
 105                         compatible = "fixed-partitions";
 106                         #address-cells = <1>;
 107                         #size-cells = <1>;
 108
 109                         partition@0 {
 110                                 label = "bootloader";
 111                                 reg = <0x00000000 0x000c0000>;
 112                                 read-only;
 113                         };
 114                         partition@c0000 {
 115                                 label = "env";
 116                                 reg = <0x000c0000 0x00002000>;
 117                         };
 118                         partition@c2000 {
 119                                 label = "user";
 120                                 reg = <0x000c2000 0x0013e000>;
 121                         };
 122                 };
 123         };
 124 };