]> git.ipfire.org Git - thirdparty/u-boot.git/blob - src/arm/renesas/r8a7792-blanche.dts
Squashed 'dts/upstream/' content from commit aaba2d45dc2a
[thirdparty/u-boot.git] / src / arm / renesas / r8a7792-blanche.dts
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Device Tree Source for the Blanche board
4 *
5 * Copyright (C) 2014 Renesas Electronics Corporation
6 * Copyright (C) 2016 Cogent Embedded, Inc.
7 */
8
9 /dts-v1/;
10 #include "r8a7792.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13
14 / {
15 model = "Blanche";
16 compatible = "renesas,blanche", "renesas,r8a7792";
17
18 aliases {
19 serial0 = &scif0;
20 serial1 = &scif3;
21 };
22
23 chosen {
24 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
25 stdout-path = "serial0:115200n8";
26 };
27
28 memory@40000000 {
29 device_type = "memory";
30 reg = <0 0x40000000 0 0x40000000>;
31 };
32
33 d3_3v: regulator-3v3 {
34 compatible = "regulator-fixed";
35 regulator-name = "D3.3V";
36 regulator-min-microvolt = <3300000>;
37 regulator-max-microvolt = <3300000>;
38 regulator-boot-on;
39 regulator-always-on;
40 };
41
42 vga-encoder {
43 compatible = "adi,adv7123";
44
45 ports {
46 #address-cells = <1>;
47 #size-cells = <0>;
48
49 port@0 {
50 reg = <0>;
51 adv7123_in: endpoint {
52 remote-endpoint = <&du_out_rgb1>;
53 };
54 };
55 port@1 {
56 reg = <1>;
57 adv7123_out: endpoint {
58 remote-endpoint = <&vga_in>;
59 };
60 };
61 };
62 };
63
64 hdmi-out {
65 compatible = "hdmi-connector";
66 type = "a";
67
68 port {
69 hdmi_con: endpoint {
70 remote-endpoint = <&adv7511_out>;
71 };
72 };
73 };
74
75 vga {
76 compatible = "vga-connector";
77
78 port {
79 vga_in: endpoint {
80 remote-endpoint = <&adv7123_out>;
81 };
82 };
83 };
84
85 x1_clk: x1 {
86 compatible = "fixed-clock";
87 #clock-cells = <0>;
88 clock-frequency = <74250000>;
89 };
90
91 x2_clk: x2 {
92 compatible = "fixed-clock";
93 #clock-cells = <0>;
94 clock-frequency = <65000000>;
95 };
96
97 keyboard {
98 compatible = "gpio-keys";
99
100 pinctrl-0 = <&keyboard_pins>;
101 pinctrl-names = "default";
102
103 key-1 {
104 linux,code = <KEY_1>;
105 label = "SW2-1";
106 wakeup-source;
107 debounce-interval = <20>;
108 gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
109 };
110 key-2 {
111 linux,code = <KEY_2>;
112 label = "SW2-2";
113 wakeup-source;
114 debounce-interval = <20>;
115 gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
116 };
117 key-3 {
118 linux,code = <KEY_3>;
119 label = "SW2-3";
120 wakeup-source;
121 debounce-interval = <20>;
122 gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
123 };
124 key-4 {
125 linux,code = <KEY_4>;
126 label = "SW2-4";
127 wakeup-source;
128 debounce-interval = <20>;
129 gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
130 };
131 key-a {
132 linux,code = <KEY_A>;
133 label = "SW24";
134 wakeup-source;
135 debounce-interval = <20>;
136 gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
137 };
138 key-b {
139 linux,code = <KEY_B>;
140 label = "SW25";
141 wakeup-source;
142 debounce-interval = <20>;
143 gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
144 };
145 };
146
147 leds {
148 compatible = "gpio-leds";
149
150 led17 {
151 gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
152 };
153 led18 {
154 gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
155 };
156 led19 {
157 gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
158 };
159 led20 {
160 gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
161 };
162 };
163
164 vcc_sdhi0: regulator-vcc-sdhi0 {
165 compatible = "regulator-fixed";
166
167 regulator-name = "SDHI0 Vcc";
168 regulator-min-microvolt = <3300000>;
169 regulator-max-microvolt = <3300000>;
170
171 gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
172 enable-active-high;
173 };
174 };
175
176 &extal_clk {
177 clock-frequency = <20000000>;
178 };
179
180 &can_clk {
181 clock-frequency = <48000000>;
182 };
183
184 &lbsc {
185 ethernet@18000000 {
186 compatible = "smsc,lan89218", "smsc,lan9115";
187 reg = <0x18000000 0x100>;
188 phy-mode = "mii";
189 interrupt-parent = <&irqc>;
190 interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
191 smsc,irq-push-pull;
192 reg-io-width = <4>;
193 vddvario-supply = <&d3_3v>;
194 vdd33a-supply = <&d3_3v>;
195
196 pinctrl-0 = <&lan89218_pins>;
197 pinctrl-names = "default";
198 };
199 };
200
201 &pfc {
202 scif0_pins: scif0 {
203 groups = "scif0_data";
204 function = "scif0";
205 };
206
207 scif3_pins: scif3 {
208 groups = "scif3_data";
209 function = "scif3";
210 };
211
212 lan89218_pins: lan89218 {
213 intc {
214 groups = "intc_irq0";
215 function = "intc";
216 };
217 lbsc {
218 groups = "lbsc_ex_cs0";
219 function = "lbsc";
220 };
221 };
222
223 can0_pins: can0 {
224 groups = "can0_data", "can_clk";
225 function = "can0";
226 };
227
228 sdhi0_pins: sdhi0 {
229 groups = "sdhi0_data4", "sdhi0_ctrl";
230 function = "sdhi0";
231 };
232
233 du0_pins: du0 {
234 groups = "du0_rgb888", "du0_sync", "du0_disp";
235 function = "du0";
236 };
237
238 du1_pins: du1 {
239 groups = "du1_rgb666", "du1_sync", "du1_disp";
240 function = "du1";
241 };
242
243 keyboard_pins: keyboard {
244 pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
245 bias-pull-up;
246 };
247
248 pmic_irq_pins: pmicirq {
249 groups = "intc_irq2";
250 function = "intc";
251 };
252 };
253
254 &rwdt {
255 timeout-sec = <60>;
256 status = "okay";
257 };
258
259 &scif0 {
260 pinctrl-0 = <&scif0_pins>;
261 pinctrl-names = "default";
262
263 status = "okay";
264 };
265
266 &scif3 {
267 pinctrl-0 = <&scif3_pins>;
268 pinctrl-names = "default";
269
270 status = "okay";
271 };
272
273 &can0 {
274 pinctrl-0 = <&can0_pins>;
275 pinctrl-names = "default";
276
277 status = "okay";
278 };
279
280 &sdhi0 {
281 pinctrl-0 = <&sdhi0_pins>;
282 pinctrl-names = "default";
283
284 vmmc-supply = <&vcc_sdhi0>;
285 cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
286 status = "okay";
287 };
288
289 &i2c1 {
290 status = "okay";
291 clock-frequency = <400000>;
292
293 hdmi@39 {
294 compatible = "adi,adv7511w";
295 reg = <0x39>;
296 interrupt-parent = <&irqc>;
297 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
298
299 adi,input-depth = <8>;
300 adi,input-colorspace = "rgb";
301 adi,input-clock = "1x";
302
303 ports {
304 #address-cells = <1>;
305 #size-cells = <0>;
306
307 port@0 {
308 reg = <0>;
309 adv7511_in: endpoint {
310 remote-endpoint = <&du_out_rgb0>;
311 };
312 };
313
314 port@1 {
315 reg = <1>;
316 adv7511_out: endpoint {
317 remote-endpoint = <&hdmi_con>;
318 };
319 };
320 };
321 };
322 };
323
324 &iic3 {
325 status = "okay";
326
327 pmic@58 {
328 compatible = "dlg,da9063";
329 reg = <0x58>;
330 pinctrl-names = "default";
331 pinctrl-0 = <&pmic_irq_pins>;
332 interrupt-parent = <&irqc>;
333 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
334 interrupt-controller;
335
336 rtc {
337 compatible = "dlg,da9063-rtc";
338 };
339
340 watchdog {
341 compatible = "dlg,da9063-watchdog";
342 };
343 };
344 };
345
346 &du {
347 pinctrl-0 = <&du0_pins>, <&du1_pins>;
348 pinctrl-names = "default";
349
350 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
351 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
352 status = "okay";
353
354 ports {
355 port@0 {
356 endpoint {
357 remote-endpoint = <&adv7511_in>;
358 };
359 };
360 port@1 {
361 endpoint {
362 remote-endpoint = <&adv7123_in>;
363 };
364 };
365 };
366 };