src/arm/ti/omap/omap5-cm-t54.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Support for CompuLab CM-T54
   4  */
   5 /dts-v1/;
   6
   7 #include "omap5.dtsi"
   8 #include <dt-bindings/interrupt-controller/irq.h>
   9 #include <dt-bindings/interrupt-controller/arm-gic.h>
  10
  11 / {
  12         model = "CompuLab CM-T54";
  13         compatible = "compulab,omap5-cm-t54", "ti,omap5";
  14
  15         memory@80000000 {
  16                 device_type = "memory";
  17                 reg = <0 0x80000000 0 0x7f000000>; /* 2048 MB */
  18         };
  19
  20         aliases {
  21                 display0 = &hdmi0;
  22                 display1 = &dvi0;
  23                 display2 = &lcd0;
  24         };
  25
  26         vmmcsd_fixed: fixed-regulator-mmcsd {
  27                 compatible = "regulator-fixed";
  28                 regulator-name = "vmmcsd_fixed";
  29                 regulator-min-microvolt = <3300000>;
  30                 regulator-max-microvolt = <3300000>;
  31         };
  32
  33         vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
  34                 compatible = "regulator-fixed";
  35                 regulator-name = "vwlan_pdn_fixed";
  36                 regulator-min-microvolt = <3300000>;
  37                 regulator-max-microvolt = <3300000>;
  38                 vin-supply = <&ldo2_reg>;
  39                 gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>;   /* gpio4_109 */
  40                 startup-delay-us = <1000>;
  41                 enable-active-high;
  42         };
  43
  44         vwlan_fixed: fixed-regulator-vwlan {
  45                 compatible = "regulator-fixed";
  46                 regulator-name = "vwlan_fixed";
  47                 regulator-min-microvolt = <3300000>;
  48                 regulator-max-microvolt = <3300000>;
  49                 vin-supply = <&vwlan_pdn_fixed>;
  50                 gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;   /* gpio4_110 */
  51                 startup-delay-us = <1000>;
  52                 enable-active-high;
  53         };
  54
  55         ads7846reg: ads7846-reg {
  56                 compatible = "regulator-fixed";
  57                 regulator-name = "ads7846-reg";
  58                 regulator-min-microvolt = <3300000>;
  59                 regulator-max-microvolt = <3300000>;
  60         };
  61
  62         /* HS USB Host PHY on PORT 2 */
  63         hsusb2_phy: hsusb2-phy-pins {
  64                 compatible = "usb-nop-xceiv";
  65                 reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
  66                 #phy-cells = <0>;
  67         };
  68
  69         /* HS USB Host PHY on PORT 3 */
  70         hsusb3_phy: hsusb3_phy {
  71                 compatible = "usb-nop-xceiv";
  72                 reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
  73                 #phy-cells = <0>;
  74         };
  75
  76         leds {
  77                 compatible = "gpio-leds";
  78                 led1 {
  79                         label = "Heartbeat";
  80                         gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
  81                         linux,default-trigger = "heartbeat";
  82                         default-state = "off";
  83                 };
  84         };
  85
  86         lcd0: display {
  87                 compatible = "startek,startek-kd050c", "panel-dpi";
  88                 label = "lcd";
  89
  90                 pinctrl-names = "default";
  91                 pinctrl-0 = <&lcd_pins>;
  92
  93                 enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
  94
  95                 panel-timing {
  96                         clock-frequency = <33000000>;
  97                         hactive = <800>;
  98                         vactive = <480>;
  99                         hfront-porch = <40>;
 100                         hback-porch = <40>;
 101                         hsync-len = <43>;
 102                         vback-porch = <29>;
 103                         vfront-porch = <13>;
 104                         vsync-len = <3>;
 105                         hsync-active = <0>;
 106                         vsync-active = <0>;
 107                         de-active = <1>;
 108                         pixelclk-active = <1>;
 109                 };
 110
 111                 port {
 112                         lcd_in: endpoint {
 113                                 remote-endpoint = <&dpi_lcd_out>;
 114                         };
 115                 };
 116         };
 117
 118         hdmi0: connector0 {
 119                 compatible = "hdmi-connector";
 120                 label = "hdmi";
 121
 122                 type = "a";
 123
 124                 pinctrl-names = "default";
 125                 pinctrl-0 = <&hdmi_conn_pins>;
 126
 127                 hpd-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
 128
 129                 port {
 130                         hdmi_connector_in: endpoint {
 131                                 remote-endpoint = <&hdmi_out>;
 132                         };
 133                 };
 134         };
 135
 136         tfp410: encoder0 {
 137                 compatible = "ti,tfp410";
 138
 139                 ports {
 140                         #address-cells = <1>;
 141                         #size-cells = <0>;
 142
 143                         port@0 {
 144                                 reg = <0>;
 145
 146                                 tfp410_in: endpoint {
 147                                         remote-endpoint = <&dpi_dvi_out>;
 148                                 };
 149                         };
 150
 151                         port@1 {
 152                                 reg = <1>;
 153
 154                                 tfp410_out: endpoint {
 155                                         remote-endpoint = <&dvi_connector_in>;
 156                                 };
 157                         };
 158                 };
 159         };
 160
 161         dvi0: connector1 {
 162                 compatible = "dvi-connector";
 163                 label = "dvi";
 164
 165                 digital;
 166
 167                 ddc-i2c-bus = <&i2c2>;
 168
 169                 port {
 170                         dvi_connector_in: endpoint {
 171                                 remote-endpoint = <&tfp410_out>;
 172                         };
 173                 };
 174         };
 175 };
 176
 177 &omap5_pmx_wkup {
 178
 179         ads7846_pins: ads7846-pins {
 180                 pinctrl-single,pins = <
 181                         OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
 182                 >;
 183         };
 184
 185         palmas_sys_nirq_pins: palmas-sys-nirq-pins {
 186                 pinctrl-single,pins = <
 187                         /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
 188                         OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
 189                 >;
 190         };
 191 };
 192
 193 &omap5_pmx_core {
 194         pinctrl-names = "default";
 195         pinctrl-0 = <
 196                         &led_gpio_pins
 197                         &usbhost_pins
 198         >;
 199
 200         led_gpio_pins: led-gpio-pins {
 201                 pinctrl-single,pins = <
 202                         OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
 203                 >;
 204         };
 205
 206         i2c1_pins: i2c1-pins {
 207                 pinctrl-single,pins = <
 208                         OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
 209                         OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
 210                 >;
 211         };
 212
 213         i2c2_pins: i2c2-pins {
 214                 pinctrl-single,pins = <
 215                         OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
 216                         OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
 217                 >;
 218         };
 219
 220         mmc1_pins: mmc1-pins {
 221                 pinctrl-single,pins = <
 222                         OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
 223                         OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
 224                         OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
 225                         OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
 226                         OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
 227                         OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
 228                 >;
 229         };
 230
 231         mmc2_pins: mmc2-pins {
 232                 pinctrl-single,pins = <
 233                         OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
 234                         OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
 235                         OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
 236                         OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
 237                         OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
 238                         OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
 239                         OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
 240                         OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
 241                         OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
 242                         OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
 243                 >;
 244         };
 245
 246         mmc3_pins: mmc3-pins {
 247                 pinctrl-single,pins = <
 248                         OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
 249                         OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
 250                         OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
 251                         OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
 252                         OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
 253                         OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
 254                 >;
 255         };
 256
 257         wlan_gpios_pins: wlan-gpios-pins {
 258                 pinctrl-single,pins = <
 259                         OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */
 260                         OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */
 261                 >;
 262         };
 263
 264         usbhost_pins: usbhost-pins {
 265                 pinctrl-single,pins = <
 266                         OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_strobe */
 267                         OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_data */
 268
 269                         OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_strobe */
 270                         OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_data */
 271
 272                         OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
 273                         OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
 274                 >;
 275         };
 276
 277         dss_hdmi_pins: dss-hdmi-pins {
 278                 pinctrl-single,pins = <
 279                         OMAP5_IOPAD(0x013c, PIN_INPUT | MUX_MODE0) /* hdmi_cec */
 280                         OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */
 281                         OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */
 282                 >;
 283         };
 284
 285         lcd_pins: lcd-pins {
 286                 pinctrl-single,pins = <
 287                         OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */
 288                 >;
 289         };
 290
 291         hdmi_conn_pins: hdmi-conn-pins {
 292                 pinctrl-single,pins = <
 293                         OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
 294                 >;
 295         };
 296
 297         dss_dpi_pins: dss-dpi-pins {
 298                 pinctrl-single,pins = <
 299                         OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */
 300                         OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */
 301                         OMAP5_IOPAD(0x0108, PIN_OUTPUT | MUX_MODE3) /* rfbi_data13.dispc_data13 */
 302                         OMAP5_IOPAD(0x010a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data12.dispc_data12 */
 303                         OMAP5_IOPAD(0x010c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data11.dispc_data11 */
 304                         OMAP5_IOPAD(0x010e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data10.dispc_data10 */
 305                         OMAP5_IOPAD(0x0110, PIN_OUTPUT | MUX_MODE3) /* rfbi_data9.dispc_data9 */
 306                         OMAP5_IOPAD(0x0112, PIN_OUTPUT | MUX_MODE3) /* rfbi_data8.dispc_data8 */
 307                         OMAP5_IOPAD(0x0114, PIN_OUTPUT | MUX_MODE3) /* rfbi_data7.dispc_data7 */
 308                         OMAP5_IOPAD(0x0116, PIN_OUTPUT | MUX_MODE3) /* rfbi_data6.dispc_data6 */
 309                         OMAP5_IOPAD(0x0118, PIN_OUTPUT | MUX_MODE3) /* rfbi_data5.dispc_data5 */
 310                         OMAP5_IOPAD(0x011a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data4.dispc_data4 */
 311                         OMAP5_IOPAD(0x011c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data3.dispc_data3 */
 312                         OMAP5_IOPAD(0x011e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data2.dispc_data2 */
 313                         OMAP5_IOPAD(0x0120, PIN_OUTPUT | MUX_MODE3) /* rfbi_data1.dispc_data1 */
 314                         OMAP5_IOPAD(0x0122, PIN_OUTPUT | MUX_MODE3) /* rfbi_data0.dispc_data0 */
 315                         OMAP5_IOPAD(0x0124, PIN_OUTPUT | MUX_MODE3) /* rfbi_we.dispc_vsync */
 316                         OMAP5_IOPAD(0x0126, PIN_OUTPUT | MUX_MODE3) /* rfbi_cs0.dispc_hsync */
 317                         OMAP5_IOPAD(0x0128, PIN_OUTPUT | MUX_MODE3) /* rfbi_a0.dispc_de */
 318                         OMAP5_IOPAD(0x012a, PIN_OUTPUT | MUX_MODE3) /* rfbi_re.dispc_pclk */
 319                         OMAP5_IOPAD(0x012c, PIN_OUTPUT | MUX_MODE3) /* rfbi_hsync0.dispc_data17 */
 320                         OMAP5_IOPAD(0x012e, PIN_OUTPUT | MUX_MODE3) /* rfbi_te_vsync0.dispc_data16 */
 321                         OMAP5_IOPAD(0x0130, PIN_OUTPUT | MUX_MODE3) /* gpio6_182.dispc_data18 */
 322                         OMAP5_IOPAD(0x0132, PIN_OUTPUT | MUX_MODE3) /* gpio6_183.dispc_data19 */
 323                         OMAP5_IOPAD(0x0134, PIN_OUTPUT | MUX_MODE3) /* gpio6_184.dispc_data20 */
 324                         OMAP5_IOPAD(0x0136, PIN_OUTPUT | MUX_MODE3) /* gpio6_185.dispc_data21 */
 325                         OMAP5_IOPAD(0x0138, PIN_OUTPUT | MUX_MODE3) /* gpio6_186.dispc_data22 */
 326                         OMAP5_IOPAD(0x013a, PIN_OUTPUT | MUX_MODE3) /* gpio6_187.dispc_data23 */
 327                 >;
 328         };
 329
 330         mcspi2_pins: mcspi1-pins {
 331                 pinctrl-single,pins = <
 332                         OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
 333                         OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
 334                         OMAP5_IOPAD(0x0100, PIN_INPUT | MUX_MODE0) /* mcspi2_somi */
 335                         OMAP5_IOPAD(0x0102, PIN_INPUT | MUX_MODE0) /* mcspi2_cs0 */
 336                 >;
 337         };
 338 };
 339
 340 &mcspi2 {
 341         pinctrl-names = "default";
 342         pinctrl-0 = <&mcspi2_pins>;
 343
 344         /* touch controller */
 345         ads7846@0 {
 346                 pinctrl-names = "default";
 347                 pinctrl-0 = <&ads7846_pins>;
 348
 349                 compatible = "ti,ads7846";
 350                 vcc-supply = <&ads7846reg>;
 351
 352                 reg = <0>;                              /* CS0 */
 353                 spi-max-frequency = <1500000>;
 354
 355                 interrupt-parent = <&gpio1>;
 356                 interrupts = <15 0>;                    /* gpio1_wk15 */
 357                 pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
 358
 359
 360                 ti,x-min = /bits/ 16 <0x0>;
 361                 ti,x-max = /bits/ 16 <0x0fff>;
 362                 ti,y-min = /bits/ 16 <0x0>;
 363                 ti,y-max = /bits/ 16 <0x0fff>;
 364
 365                 ti,x-plate-ohms = /bits/ 16 <180>;
 366                 ti,pressure-max = /bits/ 16 <255>;
 367
 368                 ti,debounce-max = /bits/ 16 <30>;
 369                 ti,debounce-tol = /bits/ 16 <10>;
 370                 ti,debounce-rep = /bits/ 16 <1>;
 371
 372                 wakeup-source;
 373         };
 374 };
 375
 376 &mmc1 {
 377         pinctrl-names = "default";
 378         pinctrl-0 = <&mmc1_pins>;
 379         vmmc-supply = <&ldo9_reg>;
 380         bus-width = <4>;
 381 };
 382
 383 &mmc2 {
 384         pinctrl-names = "default";
 385         pinctrl-0 = <&mmc2_pins>;
 386         vmmc-supply = <&vmmcsd_fixed>;
 387         bus-width = <8>;
 388         ti,non-removable;
 389 };
 390
 391 &mmc3 {
 392         pinctrl-names = "default";
 393         pinctrl-0 = <
 394                 &mmc3_pins
 395                 &wlan_gpios_pins
 396         >;
 397         vmmc-supply = <&vwlan_fixed>;
 398         bus-width = <4>;
 399         ti,non-removable;
 400 };
 401
 402 &mmc4 {
 403         status = "disabled";
 404 };
 405
 406 &mmc5 {
 407         status = "disabled";
 408 };
 409
 410 &i2c1 {
 411         pinctrl-names = "default";
 412         pinctrl-0 = <&i2c1_pins>;
 413
 414         clock-frequency = <400000>;
 415
 416         at24@50 {
 417                 compatible = "atmel,24c02";
 418                 pagesize = <16>;
 419                 reg = <0x50>;
 420         };
 421
 422         palmas: palmas@48 {
 423                 compatible = "ti,palmas";
 424                 reg = <0x48>;
 425                 pinctrl-0 = <&palmas_sys_nirq_pins>;
 426                 pinctrl-names = "default";
 427                 /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
 428                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
 429                 interrupt-controller;
 430                 #interrupt-cells = <2>;
 431                 ti,system-power-controller;
 432
 433                 extcon_usb3: palmas_usb {
 434                         compatible = "ti,palmas-usb-vid";
 435                         ti,enable-vbus-detection;
 436                         ti,enable-id-detection;
 437                         ti,wakeup;
 438                 };
 439
 440                 rtc {
 441                         compatible = "ti,palmas-rtc";
 442                         interrupt-parent = <&palmas>;
 443                         interrupts = <8 IRQ_TYPE_NONE>;
 444                 };
 445
 446                 palmas_pmic {
 447                         compatible = "ti,palmas-pmic";
 448                         interrupt-parent = <&palmas>;
 449                         interrupts = <14 IRQ_TYPE_NONE>;
 450                         interrupt-names = "short-irq";
 451
 452                         ti,ldo6-vibrator;
 453
 454                         regulators {
 455                                 smps123_reg: smps123 {
 456                                         /* VDD_OPP_MPU */
 457                                         regulator-name = "smps123";
 458                                         regulator-min-microvolt = < 600000>;
 459                                         regulator-max-microvolt = <1500000>;
 460                                         regulator-always-on;
 461                                         regulator-boot-on;
 462                                 };
 463
 464                                 smps45_reg: smps45 {
 465                                         /* VDD_OPP_MM */
 466                                         regulator-name = "smps45";
 467                                         regulator-min-microvolt = < 600000>;
 468                                         regulator-max-microvolt = <1310000>;
 469                                         regulator-always-on;
 470                                         regulator-boot-on;
 471                                 };
 472
 473                                 smps6_reg: smps6 {
 474                                         /* VDD_DDR3 - over VDD_SMPS6 */
 475                                         regulator-name = "smps6";
 476                                         regulator-min-microvolt = <1500000>;
 477                                         regulator-max-microvolt = <1500000>;
 478                                         regulator-always-on;
 479                                         regulator-boot-on;
 480                                 };
 481
 482                                 smps7_reg: smps7 {
 483                                         /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 484                                         regulator-name = "smps7";
 485                                         regulator-min-microvolt = <1800000>;
 486                                         regulator-max-microvolt = <1800000>;
 487                                         regulator-always-on;
 488                                         regulator-boot-on;
 489                                 };
 490
 491                                 smps8_reg: smps8 {
 492                                         /* VDD_OPP_CORE */
 493                                         regulator-name = "smps8";
 494                                         regulator-min-microvolt = < 600000>;
 495                                         regulator-max-microvolt = <1310000>;
 496                                         regulator-always-on;
 497                                         regulator-boot-on;
 498                                 };
 499
 500                                 smps9_reg: smps9 {
 501                                         /* VDDA_2v1_AUD over VDD_2v1 */
 502                                         regulator-name = "smps9";
 503                                         regulator-min-microvolt = <3300000>;
 504                                         regulator-max-microvolt = <3300000>;
 505                                         ti,smps-range = <0x80>;
 506                                         regulator-always-on;
 507                                         regulator-boot-on;
 508                                 };
 509
 510                                 smps10_out2_reg: smps10_out2 {
 511                                         /* VBUS_5V_OTG */
 512                                         regulator-name = "smps10_out2";
 513                                         regulator-min-microvolt = <5000000>;
 514                                         regulator-max-microvolt = <5000000>;
 515                                         regulator-always-on;
 516                                         regulator-boot-on;
 517                                 };
 518
 519                                 smps10_out1_reg: smps10_out1 {
 520                                         /* VBUS_5V_OTG */
 521                                         regulator-name = "smps10_out1";
 522                                         regulator-min-microvolt = <5000000>;
 523                                         regulator-max-microvolt = <5000000>;
 524                                 };
 525
 526                                 ldo1_reg: ldo1 {
 527                                         /* VDDAPHY_CAM: vdda_csiport */
 528                                         regulator-name = "ldo1";
 529                                         regulator-min-microvolt = <1800000>;
 530                                         regulator-max-microvolt = <1800000>;
 531                                 };
 532
 533                                 ldo2_reg: ldo2 {
 534                                         /* VDD_3V3_WLAN */
 535                                         regulator-name = "ldo2";
 536                                         regulator-min-microvolt = <3300000>;
 537                                         regulator-max-microvolt = <3300000>;
 538                                         startup-delay-us = <1000>;
 539                                 };
 540
 541                                 ldo3_reg: ldo3 {
 542                                         /* VCC_1V5_AUD */
 543                                         regulator-name = "ldo3";
 544                                         regulator-min-microvolt = <1500000>;
 545                                         regulator-max-microvolt = <1500000>;
 546                                         regulator-always-on;
 547                                         regulator-boot-on;
 548                                 };
 549
 550                                 ldo4_reg: ldo4 {
 551                                         /* VDDAPHY_DISP: vdda_dsiport/hdmi */
 552                                         regulator-name = "ldo4";
 553                                         regulator-min-microvolt = <1800000>;
 554                                         regulator-max-microvolt = <1800000>;
 555                                 };
 556
 557                                 ldo5_reg: ldo5 {
 558                                         /* VDDA_1V8_PHY: usb/sata/hdmi.. */
 559                                         regulator-name = "ldo5";
 560                                         regulator-min-microvolt = <1800000>;
 561                                         regulator-max-microvolt = <1800000>;
 562                                         regulator-always-on;
 563                                         regulator-boot-on;
 564                                 };
 565
 566                                 ldo6_reg: ldo6 {
 567                                         /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
 568                                         regulator-name = "ldo6";
 569                                         regulator-min-microvolt = <1200000>;
 570                                         regulator-max-microvolt = <1200000>;
 571                                         regulator-always-on;
 572                                         regulator-boot-on;
 573                                 };
 574
 575                                 ldo7_reg: ldo7 {
 576                                         /* VDD_VPP: vpp1 */
 577                                         regulator-name = "ldo7";
 578                                         regulator-min-microvolt = <2000000>;
 579                                         regulator-max-microvolt = <2000000>;
 580                                         /* Only for efuse reprograming! */
 581                                         status = "disabled";
 582                                 };
 583
 584                                 ldo8_reg: ldo8 {
 585                                         /* VDD_3V_GP: act led/serial console */
 586                                         regulator-name = "ldo8";
 587                                         regulator-min-microvolt = <3000000>;
 588                                         regulator-max-microvolt = <3000000>;
 589                                         regulator-always-on;
 590                                         regulator-boot-on;
 591                                 };
 592
 593                                 ldo9_reg: ldo9 {
 594                                         /* VCC_DV_SDIO: vdds_sdcard */
 595                                         regulator-name = "ldo9";
 596                                         regulator-min-microvolt = <1800000>;
 597                                         regulator-max-microvolt = <3000000>;
 598                                         regulator-boot-on;
 599                                 };
 600
 601                                 ldoln_reg: ldoln {
 602                                         /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
 603                                         regulator-name = "ldoln";
 604                                         regulator-min-microvolt = <1800000>;
 605                                         regulator-max-microvolt = <1800000>;
 606                                         regulator-always-on;
 607                                         regulator-boot-on;
 608                                 };
 609
 610                                 ldousb_reg: ldousb {
 611                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 612                                         regulator-name = "ldousb";
 613                                         regulator-min-microvolt = <3250000>;
 614                                         regulator-max-microvolt = <3250000>;
 615                                         regulator-always-on;
 616                                         regulator-boot-on;
 617                                 };
 618
 619                                 regen3_reg: regen3 {
 620                                         /* REGEN3 controls LDO9 supply to card */
 621                                         regulator-name = "regen3";
 622                                         regulator-always-on;
 623                                         regulator-boot-on;
 624                                 };
 625                         };
 626                 };
 627         };
 628 };
 629
 630 &i2c2 {
 631         pinctrl-names = "default";
 632         pinctrl-0 = <&i2c2_pins>;
 633
 634         clock-frequency = <100000>;
 635 };
 636
 637 &usbhshost {
 638         port2-mode = "ehci-hsic";
 639         port3-mode = "ehci-hsic";
 640 };
 641
 642 &usbhsehci {
 643         phys = <0 &hsusb2_phy &hsusb3_phy>;
 644 };
 645
 646 &usb3 {
 647         extcon = <&extcon_usb3>;
 648         vbus-supply = <&smps10_out1_reg>;
 649 };
 650
 651 &cpu0 {
 652         cpu0-supply = <&smps123_reg>;
 653 };
 654
 655 &dss {
 656         status = "okay";
 657
 658         pinctrl-names = "default";
 659         pinctrl-0 = <&dss_dpi_pins>;
 660
 661         port {
 662                 #address-cells = <1>;
 663                 #size-cells = <0>;
 664
 665                 dpi_dvi_out: endpoint@0 {
 666                         reg = <0>;
 667                         remote-endpoint = <&tfp410_in>;
 668                         data-lines = <24>;
 669                 };
 670
 671                 dpi_lcd_out: endpoint@1 {
 672                         reg = <1>;
 673                         remote-endpoint = <&lcd_in>;
 674                         data-lines = <24>;
 675                 };
 676         };
 677 };
 678
 679 &dsi2 {
 680         status = "okay";
 681         vdd-supply = <&ldo4_reg>;
 682 };
 683
 684 &hdmi {
 685         status = "okay";
 686         vdda-supply = <&ldo4_reg>;
 687
 688         pinctrl-names = "default";
 689         pinctrl-0 = <&dss_hdmi_pins>;
 690
 691         port {
 692                 hdmi_out: endpoint {
 693                         remote-endpoint = <&hdmi_connector_in>;
 694                         lanes = <1 0 3 2 5 4 7 6>;
 695                 };
 696         };
 697 };