src/arm64/amlogic/meson-gxl-s905d-vero4k-plus.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Author: Christian Hewitt <christianshewitt@gmail.com>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "meson-gxl-s905d.dtsi"
   9 #include "meson-gx-p23x-q20x.dtsi"
  10 #include <dt-bindings/input/input.h>
  11 #include <dt-bindings/leds/common.h>
  12
  13 / {
  14         compatible = "osmc,vero4k-plus", "amlogic,s905d", "amlogic,meson-gxl";
  15         model = "OSMC Vero 4K Plus";
  16
  17         gpio-keys-polled {
  18                 compatible = "gpio-keys-polled";
  19                 poll-interval = <20>;
  20
  21                 button {
  22                         label = "power";
  23                         linux,code = <KEY_POWER>;
  24                         gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
  25                 };
  26         };
  27
  28         leds {
  29                 compatible = "gpio-leds";
  30
  31                 led-standby {
  32                         color = <LED_COLOR_ID_RED>;
  33                         function = LED_FUNCTION_POWER;
  34                         gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_LOW>;
  35                         default-state = "off";
  36                         panic-indicator;
  37                 };
  38         };
  39 };
  40
  41 &ethmac {
  42         pinctrl-0 = <&eth_pins>;
  43         pinctrl-names = "default";
  44
  45         phy-mode = "rgmii-txid";
  46         phy-handle = <&external_phy>;
  47
  48         amlogic,tx-delay-ns = <0>;
  49 };
  50
  51 &external_mdio {
  52         external_phy: ethernet-phy@0 {
  53                 /* Realtek RTL8211F (0x001cc916) */
  54                 pinctrl-0 = <&eth_phy_irq_pin>;
  55                 pinctrl-names = "default";
  56
  57                 reg = <0>;
  58                 max-speed = <1000>;
  59
  60                 reset-assert-us = <10000>;
  61                 reset-deassert-us = <80000>;
  62                 reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
  63
  64                 interrupt-parent = <&gpio_intc>;
  65                 interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
  66         };
  67 };
  68
  69 &pinctrl_periphs {
  70         /* Ensure the phy irq pin is properly configured as input */
  71         eth_phy_irq_pin: eth-phy-irq {
  72                 mux {
  73                         groups = "GPIOZ_15";
  74                         function = "gpio_periphs";
  75                         bias-disable;
  76                         output-disable;
  77                 };
  78         };
  79 };
  80
  81 &sd_emmc_a {
  82         brcmf: wifi@1 {
  83                 reg = <1>;
  84                 compatible = "brcm,bcm4329-fmac";
  85         };
  86 };
  87
  88 &uart_A {
  89         status = "okay";
  90         pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
  91         pinctrl-names = "default";
  92         uart-has-rtscts;
  93
  94         bluetooth {
  95                 compatible = "brcm,bcm43438-bt";
  96                 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
  97                 max-speed = <2000000>;
  98                 clocks = <&wifi32k>;
  99                 clock-names = "lpo";
 100         };
 101 };
 102
 103 &usb {
 104         dr_mode = "host";
 105 };
 106
 107 &usb2_phy0 {
 108         /* HDMI_5V also supplies the USB VBUS */
 109         phy-supply = <&hdmi_5v>;
 110 };
 111
 112 &usb2_phy0 {
 113         /* HDMI_5V also supplies the USB VBUS */
 114         phy-supply = <&hdmi_5v>;
 115 };