src/powerpc/fsl/bsc9131rdb.dtsi

   1 /*
   2  * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
   3  *
   4  * Copyright 2011-2012 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 &board_ifc {
  36
  37         nand@0,0 {
  38                 #address-cells = <1>;
  39                 #size-cells = <1>;
  40                 compatible = "fsl,ifc-nand";
  41                 reg = <0x0 0x0 0x4000>;
  42
  43         };
  44 };
  45
  46 &board_soc {
  47         /* BSC9131RDB does not have any device on i2c@3100 */
  48         i2c@3100 {
  49                 status = "disabled";
  50         };
  51
  52         spi@7000 {
  53                 flash@0 {
  54                         #address-cells = <1>;
  55                         #size-cells = <1>;
  56                         compatible = "spansion,s25sl12801", "jedec,spi-nor";
  57                         reg = <0>;
  58                         spi-max-frequency = <50000000>;
  59
  60                 };
  61         };
  62
  63         usb@22000 {
  64                 phy_type = "ulpi";
  65         };
  66
  67         mdio@24000 {
  68                 phy0: ethernet-phy@0 {
  69                         interrupts = <3 1 0 0>;
  70                         reg = <0x0>;
  71                 };
  72
  73                 phy1: ethernet-phy@1 {
  74                         interrupts = <2 1 0 0>;
  75                         reg = <0x3>;
  76                 };
  77         };
  78
  79         sdhc@2e000 {
  80                 status = "disabled";
  81         };
  82
  83         ptp_clock@b0e00 {
  84                 compatible = "fsl,etsec-ptp";
  85                 reg = <0xb0e00 0xb0>;
  86                 interrupts = <68 2 0 0 69 2 0 0>;
  87                 fsl,tclk-period = <5>;
  88                 fsl,tmr-prsc    = <2>;
  89                 fsl,tmr-add     = <0xcccccccd>;
  90                 fsl,tmr-fiper1  = <999999995>;
  91                 fsl,tmr-fiper2  = <99990>;
  92                 fsl,max-adj     = <249999999>;
  93         };
  94
  95         enet0: ethernet@b0000 {
  96                 phy-handle = <&phy0>;
  97                 phy-connection-type = "rgmii-id";
  98         };
  99
 100         enet1: ethernet@b1000 {
 101                 phy-handle = <&phy1>;
 102                 phy-connection-type = "rgmii-id";
 103         };
 104 };