src/powerpc/fsl/p1021si-post.dtsi

   1 /*
   2  * P1021/P1012 Silicon/SoC Device Tree Source (post include)
   3  *
   4  * Copyright 2011-2012 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 &lbc {
  36         #address-cells = <2>;
  37         #size-cells = <1>;
  38         compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
  39         interrupts = <19 2 0 0>,
  40                      <16 2 0 0>;
  41 };
  42
  43 /* controller at 0x9000 */
  44 &pci0 {
  45         compatible = "fsl,mpc8548-pcie";
  46         device_type = "pci";
  47         #size-cells = <2>;
  48         #address-cells = <3>;
  49         bus-range = <0 255>;
  50         clock-frequency = <33333333>;
  51         interrupts = <16 2 0 0>;
  52
  53         pcie@0 {
  54                 reg = <0 0 0 0 0>;
  55                 #interrupt-cells = <1>;
  56                 #size-cells = <2>;
  57                 #address-cells = <3>;
  58                 device_type = "pci";
  59                 interrupts = <16 2 0 0>;
  60                 interrupt-map-mask = <0xf800 0 0 7>;
  61                 interrupt-map = <
  62                         /* IDSEL 0x0 */
  63                         0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
  64                         0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
  65                         0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
  66                         0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
  67                         >;
  68         };
  69 };
  70
  71 /* controller at 0xa000 */
  72 &pci1 {
  73         compatible = "fsl,mpc8548-pcie";
  74         device_type = "pci";
  75         #size-cells = <2>;
  76         #address-cells = <3>;
  77         bus-range = <0 255>;
  78         clock-frequency = <33333333>;
  79         interrupts = <16 2 0 0>;
  80
  81         pcie@0 {
  82                 reg = <0 0 0 0 0>;
  83                 #interrupt-cells = <1>;
  84                 #size-cells = <2>;
  85                 #address-cells = <3>;
  86                 device_type = "pci";
  87                 interrupts = <16 2 0 0>;
  88                 interrupt-map-mask = <0xf800 0 0 7>;
  89
  90                 interrupt-map = <
  91                         /* IDSEL 0x0 */
  92                         0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
  93                         0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
  94                         0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
  95                         0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
  96                         >;
  97         };
  98 };
  99
 100 &soc {
 101         #address-cells = <1>;
 102         #size-cells = <1>;
 103         device_type = "soc";
 104         compatible = "fsl,p1021-immr", "simple-bus";
 105         bus-frequency = <0>;            // Filled out by uboot.
 106
 107         ecm-law@0 {
 108                 compatible = "fsl,ecm-law";
 109                 reg = <0x0 0x1000>;
 110                 fsl,num-laws = <12>;
 111         };
 112
 113         ecm@1000 {
 114                 compatible = "fsl,p1021-ecm", "fsl,ecm";
 115                 reg = <0x1000 0x1000>;
 116                 interrupts = <16 2 0 0>;
 117         };
 118
 119         memory-controller@2000 {
 120                 compatible = "fsl,p1021-memory-controller";
 121                 reg = <0x2000 0x1000>;
 122                 interrupts = <16 2 0 0>;
 123         };
 124
 125 /include/ "pq3-i2c-0.dtsi"
 126 /include/ "pq3-i2c-1.dtsi"
 127 /include/ "pq3-duart-0.dtsi"
 128
 129 /include/ "pq3-espi-0.dtsi"
 130         spi@7000 {
 131                 fsl,espi-num-chipselects = <4>;
 132         };
 133
 134 /include/ "pq3-gpio-0.dtsi"
 135
 136         L2: l2-cache-controller@20000 {
 137                 compatible = "fsl,p1021-l2-cache-controller";
 138                 reg = <0x20000 0x1000>;
 139                 cache-line-size = <32>; // 32 bytes
 140                 cache-size = <0x40000>; // L2,256K
 141                 interrupts = <16 2 0 0>;
 142         };
 143
 144 /include/ "pq3-dma-0.dtsi"
 145 /include/ "pq3-usb2-dr-0.dtsi"
 146         usb@22000 {
 147                 compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
 148         };
 149
 150 /include/ "pq3-esdhc-0.dtsi"
 151         sdhc@2e000 {
 152                 sdhci,auto-cmd12;
 153         };
 154
 155 /include/ "pq3-sec3.3-0.dtsi"
 156
 157 /include/ "pq3-mpic.dtsi"
 158 /include/ "pq3-mpic-timer-B.dtsi"
 159
 160 /include/ "pq3-etsec2-0.dtsi"
 161         enet0: enet0_grp2: ethernet@b0000 {
 162         };
 163
 164 /include/ "pq3-etsec2-1.dtsi"
 165         enet1: enet1_grp2: ethernet@b1000 {
 166         };
 167
 168 /include/ "pq3-etsec2-2.dtsi"
 169         enet2: enet2_grp2: ethernet@b2000 {
 170         };
 171
 172         global-utilities@e0000 {
 173                 compatible = "fsl,p1021-guts";
 174                 reg = <0xe0000 0x1000>;
 175                 fsl,has-rstcr;
 176         };
 177 };
 178
 179 &qe {
 180         #address-cells = <1>;
 181         #size-cells = <1>;
 182         device_type = "qe";
 183         compatible = "fsl,qe";
 184         fsl,qe-num-riscs = <1>;
 185         fsl,qe-num-snums = <28>;
 186
 187         qeic: interrupt-controller@80 {
 188                 interrupt-controller;
 189                 compatible = "fsl,qe-ic";
 190                 #address-cells = <0>;
 191                 #interrupt-cells = <1>;
 192                 reg = <0x80 0x80>;
 193                 interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
 194         };
 195
 196         ucc@2000 {
 197                 cell-index = <1>;
 198                 reg = <0x2000 0x200>;
 199                 interrupts = <32>;
 200                 interrupt-parent = <&qeic>;
 201         };
 202
 203         mdio@2120 {
 204                 #address-cells = <1>;
 205                 #size-cells = <0>;
 206                 reg = <0x2120 0x18>;
 207                 compatible = "fsl,ucc-mdio";
 208         };
 209
 210         ucc@2400 {
 211                 cell-index = <5>;
 212                 reg = <0x2400 0x200>;
 213                 interrupts = <40>;
 214                 interrupt-parent = <&qeic>;
 215         };
 216
 217         ucc@2600 {
 218                 cell-index = <7>;
 219                 reg = <0x2600 0x200>;
 220                 interrupts = <42>;
 221                 interrupt-parent = <&qeic>;
 222         };
 223
 224         ucc@2200 {
 225                 cell-index = <3>;
 226                 reg = <0x2200 0x200>;
 227                 interrupts = <34>;
 228                 interrupt-parent = <&qeic>;
 229         };
 230
 231         muram@10000 {
 232                 #address-cells = <1>;
 233                 #size-cells = <1>;
 234                 compatible = "fsl,qe-muram", "fsl,cpm-muram";
 235                 ranges = <0x0 0x10000 0x6000>;
 236
 237                 data-only@0 {
 238                         compatible = "fsl,qe-muram-data",
 239                         "fsl,cpm-muram-data";
 240                         reg = <0x0 0x6000>;
 241                 };
 242         };
 243 };
 244
 245 /include/ "pq3-etsec2-grp2-0.dtsi"
 246 /include/ "pq3-etsec2-grp2-1.dtsi"
 247 /include/ "pq3-etsec2-grp2-2.dtsi"