#include <elf.h>
#include <soc.h>
-#if IS_ENABLED(CONFIG_SYS_K3_SPL_ATF)
-enum {
- IMAGE_ID_ATF,
- IMAGE_ID_OPTEE,
- IMAGE_ID_SPL,
- IMAGE_ID_DM_FW,
- IMAGE_AMT,
-};
-
-#if CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS)
-static const char *image_os_match[IMAGE_AMT] = {
- "arm-trusted-firmware",
- "tee",
- "U-Boot",
- "DM",
-};
-#endif
-
-static struct image_info fit_image_info[IMAGE_AMT];
-#endif
-
struct ti_sci_handle *get_ti_sci_handle(void)
{
struct udevice *dev;
}
#endif
-#if IS_ENABLED(CONFIG_SYS_K3_SPL_ATF)
-
-void init_env(void)
-{
-#ifdef CONFIG_SPL_ENV_SUPPORT
- char *part;
-
- env_init();
- env_relocate();
- switch (spl_boot_device()) {
- case BOOT_DEVICE_MMC2:
- part = env_get("bootpart");
- env_set("storage_interface", "mmc");
- env_set("fw_dev_part", part);
- break;
- case BOOT_DEVICE_SPI:
- env_set("storage_interface", "ubi");
- env_set("fw_ubi_mtdpart", "UBI");
- env_set("fw_ubi_volume", "UBI0");
- break;
- default:
- printf("%s from device %u not supported!\n",
- __func__, spl_boot_device());
- return;
- }
-#endif
-}
-
-int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
-{
- struct udevice *fsdev;
- char *name = NULL;
- int size = 0;
-
- if (!IS_ENABLED(CONFIG_FS_LOADER))
- return 0;
-
- *loadaddr = 0;
-#ifdef CONFIG_SPL_ENV_SUPPORT
- switch (spl_boot_device()) {
- case BOOT_DEVICE_MMC2:
- name = env_get(name_fw);
- *loadaddr = env_get_hex(name_loadaddr, *loadaddr);
- break;
- default:
- printf("Loading rproc fw image from device %u not supported!\n",
- spl_boot_device());
- return 0;
- }
-#endif
- if (!*loadaddr)
- return 0;
-
- if (!get_fs_loader(&fsdev)) {
- size = request_firmware_into_buf(fsdev, name, (void *)*loadaddr,
- 0, 0);
- }
-
- return size;
-}
-
-void release_resources_for_core_shutdown(void)
-{
- struct ti_sci_handle *ti_sci = get_ti_sci_handle();
- struct ti_sci_dev_ops *dev_ops = &ti_sci->ops.dev_ops;
- struct ti_sci_proc_ops *proc_ops = &ti_sci->ops.proc_ops;
- int ret;
- u32 i;
-
- /* Iterate through list of devices to put (shutdown) */
- for (i = 0; i < ARRAY_SIZE(put_device_ids); i++) {
- u32 id = put_device_ids[i];
-
- ret = dev_ops->put_device(ti_sci, id);
- if (ret)
- panic("Failed to put device %u (%d)\n", id, ret);
- }
-
- /* Iterate through list of cores to put (shutdown) */
- for (i = 0; i < ARRAY_SIZE(put_core_ids); i++) {
- u32 id = put_core_ids[i];
-
- /*
- * Queue up the core shutdown request. Note that this call
- * needs to be followed up by an actual invocation of an WFE
- * or WFI CPU instruction.
- */
- ret = proc_ops->proc_shutdown_no_wait(ti_sci, id);
- if (ret)
- panic("Failed sending core %u shutdown message (%d)\n",
- id, ret);
- }
-}
-
-void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
-{
- typedef void __noreturn (*image_entry_noargs_t)(void);
- struct ti_sci_handle *ti_sci = get_ti_sci_handle();
- u32 loadaddr = 0;
- int ret, size = 0, shut_cpu = 0;
-
- /* Release all the exclusive devices held by SPL before starting ATF */
- ti_sci->ops.dev_ops.release_exclusive_devices(ti_sci);
-
- ret = rproc_init();
- if (ret)
- panic("rproc failed to be initialized (%d)\n", ret);
-
- init_env();
-
- if (!fit_image_info[IMAGE_ID_DM_FW].image_start) {
- size = load_firmware("name_mcur5f0_0fw", "addr_mcur5f0_0load",
- &loadaddr);
- }
-
- /*
- * It is assumed that remoteproc device 1 is the corresponding
- * Cortex-A core which runs ATF. Make sure DT reflects the same.
- */
- if (!fit_image_info[IMAGE_ID_ATF].image_start)
- fit_image_info[IMAGE_ID_ATF].image_start =
- spl_image->entry_point;
-
- ret = rproc_load(1, fit_image_info[IMAGE_ID_ATF].image_start, 0x200);
- if (ret)
- panic("%s: ATF failed to load on rproc (%d)\n", __func__, ret);
-
-#if (CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS) && IS_ENABLED(CONFIG_SYS_K3_SPL_ATF))
- /* Authenticate ATF */
- void *image_addr = (void *)fit_image_info[IMAGE_ID_ATF].image_start;
-
- debug("%s: Authenticating image: addr=%lx, size=%ld, os=%s\n", __func__,
- fit_image_info[IMAGE_ID_ATF].image_start,
- fit_image_info[IMAGE_ID_ATF].image_len,
- image_os_match[IMAGE_ID_ATF]);
-
- ti_secure_image_post_process(&image_addr,
- (size_t *)&fit_image_info[IMAGE_ID_ATF].image_len);
-
- /* Authenticate OPTEE */
- image_addr = (void *)fit_image_info[IMAGE_ID_OPTEE].image_start;
-
- debug("%s: Authenticating image: addr=%lx, size=%ld, os=%s\n", __func__,
- fit_image_info[IMAGE_ID_OPTEE].image_start,
- fit_image_info[IMAGE_ID_OPTEE].image_len,
- image_os_match[IMAGE_ID_OPTEE]);
-
- ti_secure_image_post_process(&image_addr,
- (size_t *)&fit_image_info[IMAGE_ID_OPTEE].image_len);
-
-#endif
-
- if (!fit_image_info[IMAGE_ID_DM_FW].image_len &&
- !(size > 0 && valid_elf_image(loadaddr))) {
- shut_cpu = 1;
- goto start_arm64;
- }
-
- if (!fit_image_info[IMAGE_ID_DM_FW].image_start) {
- loadaddr = load_elf_image_phdr(loadaddr);
- } else {
- loadaddr = fit_image_info[IMAGE_ID_DM_FW].image_start;
- if (valid_elf_image(loadaddr))
- loadaddr = load_elf_image_phdr(loadaddr);
- }
-
- debug("%s: jumping to address %x\n", __func__, loadaddr);
-
-start_arm64:
- /* Add an extra newline to differentiate the ATF logs from SPL */
- printf("Starting ATF on ARM64 core...\n\n");
-
- ret = rproc_start(1);
- if (ret)
- panic("%s: ATF failed to start on rproc (%d)\n", __func__, ret);
-
- if (shut_cpu) {
- debug("Shutting down...\n");
- release_resources_for_core_shutdown();
-
- while (1)
- asm volatile("wfe");
- }
- image_entry_noargs_t image_entry = (image_entry_noargs_t)loadaddr;
-
- image_entry();
-}
-#endif
-
-#if CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS)
+#if CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS) && !IS_ENABLED(CONFIG_SYS_K3_SPL_ATF)
void board_fit_image_post_process(const void *fit, int node, void **p_image,
size_t *p_size)
{
-#if IS_ENABLED(CONFIG_SYS_K3_SPL_ATF)
- int len;
- int i;
- const char *os;
- u32 addr;
-
- os = fdt_getprop(fit, node, "os", &len);
- addr = fdt_getprop_u32_default_node(fit, node, 0, "entry", -1);
-
- debug("%s: processing image: addr=%x, size=%d, os=%s\n", __func__,
- addr, *p_size, os);
-
- for (i = 0; i < IMAGE_AMT; i++) {
- if (!strcmp(os, image_os_match[i])) {
- fit_image_info[i].image_start = addr;
- fit_image_info[i].image_len = *p_size;
- debug("%s: matched image for ID %d\n", __func__, i);
- break;
- }
- }
- /*
- * Only DM and the DTBs are being authenticated here,
- * rest will be authenticated when A72 cluster is up
- */
- if ((i != IMAGE_ID_ATF) && (i != IMAGE_ID_OPTEE))
-#endif
- {
- ti_secure_image_check_binary(p_image, p_size);
- ti_secure_image_post_process(p_image, p_size);
- }
-#if IS_ENABLED(CONFIG_SYS_K3_SPL_ATF)
- else
- ti_secure_image_check_binary(p_image, p_size);
-#endif
+ ti_secure_image_check_binary(p_image, p_size);
+ ti_secure_image_post_process(p_image, p_size);
}
#endif
* Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
*/
+#include <linux/printk.h>
#include <linux/types.h>
#include <asm/hardware.h>
#include <asm/io.h>
+#include <image.h>
+#include <fs_loader.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <spl.h>
+#include <remoteproc.h>
+#include <elf.h>
#include "../common.h"
+#if IS_ENABLED(CONFIG_SYS_K3_SPL_ATF)
+enum {
+ IMAGE_ID_ATF,
+ IMAGE_ID_OPTEE,
+ IMAGE_ID_SPL,
+ IMAGE_ID_DM_FW,
+ IMAGE_AMT,
+};
+
+#if CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS)
+static const char *image_os_match[IMAGE_AMT] = {
+ "arm-trusted-firmware",
+ "tee",
+ "U-Boot",
+ "DM",
+};
+#endif
+
+static struct image_info fit_image_info[IMAGE_AMT];
+
+void init_env(void)
+{
+#ifdef CONFIG_SPL_ENV_SUPPORT
+ char *part;
+
+ env_init();
+ env_relocate();
+ switch (spl_boot_device()) {
+ case BOOT_DEVICE_MMC2:
+ part = env_get("bootpart");
+ env_set("storage_interface", "mmc");
+ env_set("fw_dev_part", part);
+ break;
+ case BOOT_DEVICE_SPI:
+ env_set("storage_interface", "ubi");
+ env_set("fw_ubi_mtdpart", "UBI");
+ env_set("fw_ubi_volume", "UBI0");
+ break;
+ default:
+ printf("%s from device %u not supported!\n",
+ __func__, spl_boot_device());
+ return;
+ }
+#endif
+}
+
+int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
+{
+ struct udevice *fsdev;
+ char *name = NULL;
+ int size = 0;
+
+ if (!IS_ENABLED(CONFIG_FS_LOADER))
+ return 0;
+
+ *loadaddr = 0;
+#ifdef CONFIG_SPL_ENV_SUPPORT
+ switch (spl_boot_device()) {
+ case BOOT_DEVICE_MMC2:
+ name = env_get(name_fw);
+ *loadaddr = env_get_hex(name_loadaddr, *loadaddr);
+ break;
+ default:
+ printf("Loading rproc fw image from device %u not supported!\n",
+ spl_boot_device());
+ return 0;
+ }
+#endif
+ if (!*loadaddr)
+ return 0;
+
+ if (!get_fs_loader(&fsdev)) {
+ size = request_firmware_into_buf(fsdev, name, (void *)*loadaddr,
+ 0, 0);
+ }
+
+ return size;
+}
+
+void release_resources_for_core_shutdown(void)
+{
+ struct ti_sci_handle *ti_sci = get_ti_sci_handle();
+ struct ti_sci_dev_ops *dev_ops = &ti_sci->ops.dev_ops;
+ struct ti_sci_proc_ops *proc_ops = &ti_sci->ops.proc_ops;
+ int ret;
+ u32 i;
+
+ /* Iterate through list of devices to put (shutdown) */
+ for (i = 0; i < ARRAY_SIZE(put_device_ids); i++) {
+ u32 id = put_device_ids[i];
+
+ ret = dev_ops->put_device(ti_sci, id);
+ if (ret)
+ panic("Failed to put device %u (%d)\n", id, ret);
+ }
+
+ /* Iterate through list of cores to put (shutdown) */
+ for (i = 0; i < ARRAY_SIZE(put_core_ids); i++) {
+ u32 id = put_core_ids[i];
+
+ /*
+ * Queue up the core shutdown request. Note that this call
+ * needs to be followed up by an actual invocation of an WFE
+ * or WFI CPU instruction.
+ */
+ ret = proc_ops->proc_shutdown_no_wait(ti_sci, id);
+ if (ret)
+ panic("Failed sending core %u shutdown message (%d)\n",
+ id, ret);
+ }
+}
+
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+ typedef void __noreturn (*image_entry_noargs_t)(void);
+ struct ti_sci_handle *ti_sci = get_ti_sci_handle();
+ u32 loadaddr = 0;
+ int ret, size = 0, shut_cpu = 0;
+
+ /* Release all the exclusive devices held by SPL before starting ATF */
+ ti_sci->ops.dev_ops.release_exclusive_devices(ti_sci);
+
+ ret = rproc_init();
+ if (ret)
+ panic("rproc failed to be initialized (%d)\n", ret);
+
+ init_env();
+
+ if (!fit_image_info[IMAGE_ID_DM_FW].image_start) {
+ size = load_firmware("name_mcur5f0_0fw", "addr_mcur5f0_0load",
+ &loadaddr);
+ }
+
+ /*
+ * It is assumed that remoteproc device 1 is the corresponding
+ * Cortex-A core which runs ATF. Make sure DT reflects the same.
+ */
+ if (!fit_image_info[IMAGE_ID_ATF].image_start)
+ fit_image_info[IMAGE_ID_ATF].image_start =
+ spl_image->entry_point;
+
+ ret = rproc_load(1, fit_image_info[IMAGE_ID_ATF].image_start, 0x200);
+ if (ret)
+ panic("%s: ATF failed to load on rproc (%d)\n", __func__, ret);
+
+#if CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS)
+ /* Authenticate ATF */
+ void *image_addr = (void *)fit_image_info[IMAGE_ID_ATF].image_start;
+
+ debug("%s: Authenticating image: addr=%lx, size=%ld, os=%s\n", __func__,
+ fit_image_info[IMAGE_ID_ATF].image_start,
+ fit_image_info[IMAGE_ID_ATF].image_len,
+ image_os_match[IMAGE_ID_ATF]);
+
+ ti_secure_image_post_process(&image_addr,
+ (size_t *)&fit_image_info[IMAGE_ID_ATF].image_len);
+
+ /* Authenticate OPTEE */
+ image_addr = (void *)fit_image_info[IMAGE_ID_OPTEE].image_start;
+
+ debug("%s: Authenticating image: addr=%lx, size=%ld, os=%s\n", __func__,
+ fit_image_info[IMAGE_ID_OPTEE].image_start,
+ fit_image_info[IMAGE_ID_OPTEE].image_len,
+ image_os_match[IMAGE_ID_OPTEE]);
+
+ ti_secure_image_post_process(&image_addr,
+ (size_t *)&fit_image_info[IMAGE_ID_OPTEE].image_len);
+#endif
+
+ if (!fit_image_info[IMAGE_ID_DM_FW].image_len &&
+ !(size > 0 && valid_elf_image(loadaddr))) {
+ shut_cpu = 1;
+ goto start_arm64;
+ }
+
+ if (!fit_image_info[IMAGE_ID_DM_FW].image_start) {
+ loadaddr = load_elf_image_phdr(loadaddr);
+ } else {
+ loadaddr = fit_image_info[IMAGE_ID_DM_FW].image_start;
+ if (valid_elf_image(loadaddr))
+ loadaddr = load_elf_image_phdr(loadaddr);
+ }
+
+ debug("%s: jumping to address %x\n", __func__, loadaddr);
+
+start_arm64:
+ /* Add an extra newline to differentiate the ATF logs from SPL */
+ printf("Starting ATF on ARM64 core...\n\n");
+
+ ret = rproc_start(1);
+ if (ret)
+ panic("%s: ATF failed to start on rproc (%d)\n", __func__, ret);
+
+ if (shut_cpu) {
+ debug("Shutting down...\n");
+ release_resources_for_core_shutdown();
+
+ while (1)
+ asm volatile("wfe");
+ }
+ image_entry_noargs_t image_entry = (image_entry_noargs_t)loadaddr;
+
+ image_entry();
+}
+#endif
+
void disable_linefill_optimization(void)
{
u32 actlr;
actlr |= (1 << 13); /* Set DLFO bit */
asm("mcr p15, 0, %0, c1, c0, 1" : : "r" (actlr));
}
+
+#if CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+ size_t *p_size)
+{
+ int len;
+ int i;
+ const char *os;
+ u32 addr;
+
+ os = fdt_getprop(fit, node, "os", &len);
+ addr = fdt_getprop_u32_default_node(fit, node, 0, "entry", -1);
+
+ debug("%s: processing image: addr=%x, size=%d, os=%s\n", __func__,
+ addr, *p_size, os);
+
+ for (i = 0; i < IMAGE_AMT; i++) {
+ if (!strcmp(os, image_os_match[i])) {
+ fit_image_info[i].image_start = addr;
+ fit_image_info[i].image_len = *p_size;
+ debug("%s: matched image for ID %d\n", __func__, i);
+ break;
+ }
+ }
+ /*
+ * Only DM and the DTBs are being authenticated here,
+ * rest will be authenticated when A72 cluster is up
+ */
+ if ((i != IMAGE_ID_ATF) && (i != IMAGE_ID_OPTEE)) {
+ ti_secure_image_check_binary(p_image, p_size);
+ ti_secure_image_post_process(p_image, p_size);
+ } else {
+ ti_secure_image_check_binary(p_image, p_size);
+ }
+}
+#endif
projects / thirdparty / u-boot.git / commitdiff
