]> git.ipfire.org Git - people/ms/u-boot.git/blame - board/amcc/sequoia/sequoia.c
ppc4xx: Update lwmon5 board
[people/ms/u-boot.git] / board / amcc / sequoia / sequoia.c
CommitLineData
887e2ec9
SR
1/*
2 * (C) Copyright 2006
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * (C) Copyright 2006
6 * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
511d0c72 7 * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
887e2ec9
SR
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 */
24
25#include <common.h>
26#include <asm/processor.h>
27#include <ppc440.h>
28#include "sequoia.h"
29
30DECLARE_GLOBAL_DATA_PTR;
31
32extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
33
1b3c360c
SR
34ulong flash_get_size (ulong base, int banknum);
35
887e2ec9
SR
36int board_early_init_f(void)
37{
a78bc443
SR
38 u32 sdr0_cust0;
39 u32 sdr0_pfc1, sdr0_pfc2;
40 u32 reg;
887e2ec9
SR
41
42 mtdcr(ebccfga, xbcfg);
43 mtdcr(ebccfgd, 0xb8400000);
44
45 /*--------------------------------------------------------------------
46 * Setup the GPIO pins
47 *-------------------------------------------------------------------*/
48 /* test-only: take GPIO init from pcs440ep ???? in config file */
49 out32(GPIO0_OR, 0x00000000);
50 out32(GPIO0_TCR, 0x0000000f);
51 out32(GPIO0_OSRL, 0x50015400);
52 out32(GPIO0_OSRH, 0x550050aa);
53 out32(GPIO0_TSRL, 0x50015400);
54 out32(GPIO0_TSRH, 0x55005000);
55 out32(GPIO0_ISR1L, 0x50000000);
56 out32(GPIO0_ISR1H, 0x00000000);
57 out32(GPIO0_ISR2L, 0x00000000);
58 out32(GPIO0_ISR2H, 0x00000100);
59 out32(GPIO0_ISR3L, 0x00000000);
60 out32(GPIO0_ISR3H, 0x00000000);
61
62 out32(GPIO1_OR, 0x00000000);
63 out32(GPIO1_TCR, 0xc2000000);
64 out32(GPIO1_OSRL, 0x5c280000);
65 out32(GPIO1_OSRH, 0x00000000);
66 out32(GPIO1_TSRL, 0x0c000000);
67 out32(GPIO1_TSRH, 0x00000000);
68 out32(GPIO1_ISR1L, 0x00005550);
69 out32(GPIO1_ISR1H, 0x00000000);
70 out32(GPIO1_ISR2L, 0x00050000);
71 out32(GPIO1_ISR2H, 0x00000000);
72 out32(GPIO1_ISR3L, 0x01400000);
73 out32(GPIO1_ISR3H, 0x00000000);
74
75 /*--------------------------------------------------------------------
76 * Setup the interrupt controller polarities, triggers, etc.
77 *-------------------------------------------------------------------*/
78 mtdcr(uic0sr, 0xffffffff); /* clear all */
79 mtdcr(uic0er, 0x00000000); /* disable all */
80 mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
81 mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
82 mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
83 mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
84 mtdcr(uic0sr, 0xffffffff); /* clear all */
85
86 mtdcr(uic1sr, 0xffffffff); /* clear all */
87 mtdcr(uic1er, 0x00000000); /* disable all */
88 mtdcr(uic1cr, 0x00000000); /* all non-critical */
89 mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
90 mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
91 mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
92 mtdcr(uic1sr, 0xffffffff); /* clear all */
93
94 mtdcr(uic2sr, 0xffffffff); /* clear all */
95 mtdcr(uic2er, 0x00000000); /* disable all */
96 mtdcr(uic2cr, 0x00000000); /* all non-critical */
97 mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
98 mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
99 mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
100 mtdcr(uic2sr, 0xffffffff); /* clear all */
101
102 /* 50MHz tmrclk */
103 *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
104
105 /* clear write protects */
106 *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
107
108 /* enable Ethernet */
109 *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
110
111 /* enable USB device */
112 *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
113
114 /* select Ethernet pins */
115 mfsdr(SDR0_PFC1, sdr0_pfc1);
116 sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
117 mfsdr(SDR0_PFC2, sdr0_pfc2);
118 sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
119 mtsdr(SDR0_PFC2, sdr0_pfc2);
120 mtsdr(SDR0_PFC1, sdr0_pfc1);
121
122 /* PCI arbiter enabled */
123 mfsdr(sdr_pci0, reg);
124 mtsdr(sdr_pci0, 0x80000000 | reg);
125
126 /* setup NAND FLASH */
127 mfsdr(SDR0_CUST0, sdr0_cust0);
511d0c72 128 sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL |
887e2ec9
SR
129 SDR0_CUST0_NDFC_ENABLE |
130 SDR0_CUST0_NDFC_BW_8_BIT |
131 SDR0_CUST0_NDFC_ARE_MASK |
132 (0x80000000 >> (28 + CFG_NAND_CS));
511d0c72 133 mtsdr(SDR0_CUST0, sdr0_cust0);
887e2ec9
SR
134
135 return 0;
136}
137
138/*---------------------------------------------------------------------------+
139 | misc_init_r.
140 +---------------------------------------------------------------------------*/
141int misc_init_r(void)
142{
143 uint pbcr;
144 int size_val = 0;
a78bc443 145 u32 reg;
854bc8da 146#ifdef CONFIG_440EPX
887e2ec9
SR
147 unsigned long usb2d0cr = 0;
148 unsigned long usb2phy0cr, usb2h0cr = 0;
149 unsigned long sdr0_pfc1;
150 char *act = getenv("usbact");
854bc8da 151#endif
887e2ec9
SR
152
153 /*
154 * FLASH stuff...
155 */
156
157 /* Re-do sizing to get full correct info */
1b3c360c
SR
158
159 /* adjust flash start and offset */
160 gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
161 gd->bd->bi_flashoffset = 0;
162
887e2ec9
SR
163#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
164 mtdcr(ebccfga, pb3cr);
165#else
166 mtdcr(ebccfga, pb0cr);
167#endif
168 pbcr = mfdcr(ebccfgd);
169 switch (gd->bd->bi_flashsize) {
170 case 1 << 20:
171 size_val = 0;
172 break;
173 case 2 << 20:
174 size_val = 1;
175 break;
176 case 4 << 20:
177 size_val = 2;
178 break;
179 case 8 << 20:
180 size_val = 3;
181 break;
182 case 16 << 20:
183 size_val = 4;
184 break;
185 case 32 << 20:
186 size_val = 5;
187 break;
188 case 64 << 20:
189 size_val = 6;
190 break;
191 case 128 << 20:
192 size_val = 7;
193 break;
194 }
195 pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
196#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
197 mtdcr(ebccfga, pb3cr);
198#else
199 mtdcr(ebccfga, pb0cr);
200#endif
201 mtdcr(ebccfgd, pbcr);
202
1b3c360c
SR
203 /*
204 * Re-check to get correct base address
205 */
206 flash_get_size(gd->bd->bi_flashstart, 0);
887e2ec9
SR
207
208#ifdef CFG_ENV_IS_IN_FLASH
209 /* Monitor protection ON by default */
210 (void)flash_protect(FLAG_PROTECT_SET,
211 -CFG_MONITOR_LEN,
212 0xffffffff,
213 &flash_info[0]);
214
215 /* Env protection ON by default */
216 (void)flash_protect(FLAG_PROTECT_SET,
217 CFG_ENV_ADDR_REDUND,
218 CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
219 &flash_info[0]);
220#endif
221
222 /*
223 * USB suff...
224 */
854bc8da 225#ifdef CONFIG_440EPX
887e2ec9
SR
226 if (act == NULL || strcmp(act, "hostdev") == 0) {
227 /* SDR Setting */
511d0c72
WD
228 mfsdr(SDR0_PFC1, sdr0_pfc1);
229 mfsdr(SDR0_USB0, usb2d0cr);
230 mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
231 mfsdr(SDR0_USB2H0CR, usb2h0cr);
887e2ec9
SR
232
233 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
234 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
511d0c72
WD
235 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
236 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
887e2ec9 237 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
511d0c72 238 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
887e2ec9 239 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
511d0c72 240 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
887e2ec9 241 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
511d0c72 242 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
887e2ec9
SR
243
244 /* An 8-bit/60MHz interface is the only possible alternative
245 when connecting the Device to the PHY */
511d0c72
WD
246 usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
247 usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
887e2ec9 248
511d0c72
WD
249 /* To enable the USB 2.0 Device function through the UTMI interface */
250 usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
251 usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1*/
887e2ec9 252
511d0c72
WD
253 sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
254 sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/
887e2ec9 255
511d0c72
WD
256 mtsdr(SDR0_PFC1, sdr0_pfc1);
257 mtsdr(SDR0_USB0, usb2d0cr);
258 mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
259 mtsdr(SDR0_USB2H0CR, usb2h0cr);
887e2ec9
SR
260
261 /*clear resets*/
262 udelay (1000);
263 mtsdr(SDR0_SRST1, 0x00000000);
264 udelay (1000);
265 mtsdr(SDR0_SRST0, 0x00000000);
266
267 printf("USB: Host(int phy) Device(ext phy)\n");
268
269 } else if (strcmp(act, "dev") == 0) {
270 /*-------------------PATCH-------------------------------*/
271 mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
272
273 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
274 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
275 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
511d0c72 276 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
887e2ec9 277 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
511d0c72 278 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
887e2ec9 279 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
511d0c72 280 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
887e2ec9
SR
281 mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
282
283 udelay (1000);
284 mtsdr(SDR0_SRST1, 0x672c6000);
285
286 udelay (1000);
287 mtsdr(SDR0_SRST0, 0x00000080);
288
289 udelay (1000);
290 mtsdr(SDR0_SRST1, 0x60206000);
291
292 *(unsigned int *)(0xe0000350) = 0x00000001;
293
294 udelay (1000);
295 mtsdr(SDR0_SRST1, 0x60306000);
296 /*-------------------PATCH-------------------------------*/
297
298 /* SDR Setting */
511d0c72 299 mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
887e2ec9
SR
300 mfsdr(SDR0_USB2H0CR, usb2h0cr);
301 mfsdr(SDR0_USB0, usb2d0cr);
302 mfsdr(SDR0_PFC1, sdr0_pfc1);
303
304 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
305 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
511d0c72 306 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
887e2ec9
SR
307 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/
308 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
511d0c72 309 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
887e2ec9 310 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
511d0c72 311 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/
887e2ec9 312 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
511d0c72 313 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/
887e2ec9
SR
314
315 usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
511d0c72 316 usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/
887e2ec9
SR
317
318 usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
511d0c72 319 usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0*/
887e2ec9
SR
320
321 sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
511d0c72 322 sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/
887e2ec9 323
511d0c72
WD
324 mtsdr(SDR0_USB2H0CR, usb2h0cr);
325 mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
887e2ec9
SR
326 mtsdr(SDR0_USB0, usb2d0cr);
327 mtsdr(SDR0_PFC1, sdr0_pfc1);
328
329 /*clear resets*/
330 udelay (1000);
331 mtsdr(SDR0_SRST1, 0x00000000);
332 udelay (1000);
333 mtsdr(SDR0_SRST0, 0x00000000);
334
335 printf("USB: Device(int phy)\n");
336 }
854bc8da 337#endif /* CONFIG_440EPX */
887e2ec9 338
8ce16f55
JO
339 mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */
340 reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
341 mtsdr(SDR0_SRST1, reg);
342
a78bc443
SR
343 /*
344 * Clear PLB4A0_ACR[WRP]
345 * This fix will make the MAL burst disabling patch for the Linux
346 * EMAC driver obsolete.
347 */
348 reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
349 mtdcr(plb4_acr, reg);
350
887e2ec9
SR
351 return 0;
352}
353
354int checkboard(void)
355{
356 char *s = getenv("serial#");
e0b9ea8c
SR
357 u8 rev;
358 u8 val;
887e2ec9 359
854bc8da 360#ifdef CONFIG_440EPX
887e2ec9 361 printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
854bc8da
SR
362#else
363 printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
364#endif
e0b9ea8c 365
ada4697d
JM
366 rev = in8(CFG_BCSR_BASE + 0);
367 val = in8(CFG_BCSR_BASE + 5) & 0x01;
e0b9ea8c
SR
368 printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
369
887e2ec9
SR
370 if (s != NULL) {
371 puts(", serial# ");
372 puts(s);
373 }
374 putc('\n');
375
376 return (0);
377}
378
379#if defined(CFG_DRAM_TEST)
380int testdram(void)
381{
382 unsigned long *mem = (unsigned long *)0;
383 const unsigned long kend = (1024 / sizeof(unsigned long));
384 unsigned long k, n;
385
386 mtmsr(0);
387
388 for (k = 0; k < CFG_MBYTES_SDRAM;
389 ++k, mem += (1024 / sizeof(unsigned long))) {
390 if ((k & 1023) == 0) {
391 printf("%3d MB\r", k / 1024);
392 }
393
394 memset(mem, 0xaaaaaaaa, 1024);
395 for (n = 0; n < kend; ++n) {
396 if (mem[n] != 0xaaaaaaaa) {
397 printf("SDRAM test fails at: %08x\n",
398 (uint) & mem[n]);
399 return 1;
400 }
401 }
402
403 memset(mem, 0x55555555, 1024);
404 for (n = 0; n < kend; ++n) {
405 if (mem[n] != 0x55555555) {
406 printf("SDRAM test fails at: %08x\n",
407 (uint) & mem[n]);
408 return 1;
409 }
410 }
411 }
412 printf("SDRAM test passes\n");
413 return 0;
414}
415#endif
416
417/*************************************************************************
418 * pci_pre_init
419 *
420 * This routine is called just prior to registering the hose and gives
421 * the board the opportunity to check things. Returning a value of zero
422 * indicates that things are bad & PCI initialization should be aborted.
423 *
424 * Different boards may wish to customize the pci controller structure
425 * (add regions, override default access routines, etc) or perform
426 * certain pre-initialization actions.
427 *
428 ************************************************************************/
466fff1a 429#if defined(CONFIG_PCI)
887e2ec9
SR
430int pci_pre_init(struct pci_controller *hose)
431{
432 unsigned long addr;
887e2ec9
SR
433
434 /*-------------------------------------------------------------------------+
435 | Set priority for all PLB3 devices to 0.
436 | Set PLB3 arbiter to fair mode.
437 +-------------------------------------------------------------------------*/
438 mfsdr(sdr_amp1, addr);
439 mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
440 addr = mfdcr(plb3_acr);
441 mtdcr(plb3_acr, addr | 0x80000000);
442
443 /*-------------------------------------------------------------------------+
444 | Set priority for all PLB4 devices to 0.
445 +-------------------------------------------------------------------------*/
446 mfsdr(sdr_amp0, addr);
447 mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
448 addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
449 mtdcr(plb4_acr, addr);
450
451 /*-------------------------------------------------------------------------+
452 | Set Nebula PLB4 arbiter to fair mode.
453 +-------------------------------------------------------------------------*/
454 /* Segment0 */
455 addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
456 addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
457 addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
458 addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
459 mtdcr(plb0_acr, addr);
460
461 /* Segment1 */
462 addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
463 addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
464 addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
465 addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
466 mtdcr(plb1_acr, addr);
467
468 return 1;
469}
466fff1a 470#endif /* defined(CONFIG_PCI) */
887e2ec9
SR
471
472/*************************************************************************
473 * pci_target_init
474 *
475 * The bootstrap configuration provides default settings for the pci
476 * inbound map (PIM). But the bootstrap config choices are limited and
477 * may not be sufficient for a given board.
478 *
479 ************************************************************************/
480#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
481void pci_target_init(struct pci_controller *hose)
482{
483 /*--------------------------------------------------------------------------+
484 * Set up Direct MMIO registers
485 *--------------------------------------------------------------------------*/
486 /*--------------------------------------------------------------------------+
487 | PowerPC440EPX PCI Master configuration.
488 | Map one 1Gig range of PLB/processor addresses to PCI memory space.
489 | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
490 | Use byte reversed out routines to handle endianess.
491 | Make this region non-prefetchable.
492 +--------------------------------------------------------------------------*/
493 out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
494 out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
495 out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
496 out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
497 out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
498
499 out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
500 out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
501 out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
502 out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
503 out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
504
505 out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
506 out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
507 out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
508 out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
509
510 /*--------------------------------------------------------------------------+
511 * Set up Configuration registers
512 *--------------------------------------------------------------------------*/
513
514 /* Program the board's subsystem id/vendor id */
515 pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
516 CFG_PCI_SUBSYS_VENDORID);
517 pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
518
519 /* Configure command register as bus master */
520 pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
521
522 /* 240nS PCI clock */
523 pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
524
525 /* No error reporting */
526 pci_write_config_word(0, PCI_ERREN, 0);
527
528 pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
529
530}
531#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
532
533/*************************************************************************
534 * pci_master_init
535 *
536 ************************************************************************/
537#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
538void pci_master_init(struct pci_controller *hose)
539{
540 unsigned short temp_short;
541
542 /*--------------------------------------------------------------------------+
543 | Write the PowerPC440 EP PCI Configuration regs.
544 | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
545 | Enable PowerPC440 EP to act as a PCI memory target (PTM).
546 +--------------------------------------------------------------------------*/
547 pci_read_config_word(0, PCI_COMMAND, &temp_short);
548 pci_write_config_word(0, PCI_COMMAND,
549 temp_short | PCI_COMMAND_MASTER |
550 PCI_COMMAND_MEMORY);
551}
552#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
553
554/*************************************************************************
555 * is_pci_host
556 *
557 * This routine is called to determine if a pci scan should be
558 * performed. With various hardware environments (especially cPCI and
559 * PPMC) it's insufficient to depend on the state of the arbiter enable
560 * bit in the strap register, or generic host/adapter assumptions.
561 *
562 * Rather than hard-code a bad assumption in the general 440 code, the
563 * 440 pci code requires the board to decide at runtime.
564 *
565 * Return 0 for adapter mode, non-zero for host (monarch) mode.
566 *
567 *
568 ************************************************************************/
569#if defined(CONFIG_PCI)
570int is_pci_host(struct pci_controller *hose)
571{
572 /* Cactus is always configured as host. */
573 return (1);
574}
575#endif /* defined(CONFIG_PCI) */
a11e0696
IL
576#if defined(CONFIG_POST)
577/*
578 * Returns 1 if keys pressed to start the power-on long-running tests
579 * Called from board_init_f().
580 */
581int post_hotkeys_pressed(void)
582{
583 return 0; /* No hotkeys supported */
584}
585#endif /* CONFIG_POST */