bfd/

[thirdparty/binutils-gdb.git] / gas / ChangeLog

2003-12-18  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-mips.c (mips_need_elf_addend_fixup): Delete.
	(md_apply_fix3): Remove bfd_install_relocation workarounds.
	(tc_gen_reloc): Likewise. Factor handling of pc-relative relocations
	and treat fx_addnumber as relative to the relocation address.

2003-12-18  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-mips.c (s_change_section): When parsing the MIPS-specific
	.section syntax, map SHT_MIPS_DWARF to SHT_PROGBITS.

2003-12-17  Mark Mitchell  <mark@codesourcery.com>

	* config/tc-arm.c (arm_archs): Change "armv6" to "armv6j".
	* doc/c-arm.texi (ARM Options): Likewise.

2003-12-17  Nick Clifton  <nickc@redhat.com>

	* config/tc-m32r.c (error_explicit_parallel_conflicts): Rename
        to 'ignore_parallel_conflicts'.
        (md_longopts): Change option names as well.
        (md_parse_option): Separate the	warn_explicit and ignore
        parallel conflicts options.
        (md_show_usage): Update descriptions of these options.
        (first_writes_to_seconds_operands): Do not run this check if
        ignoring parallel conflicts.
        (assemble_two_insns): Remove code that checked
        error_explicit_parallel_conflicts.
        * doc/c-m32r.texi: Update descriptions of the options.
        
2003-12-16  Dmitry Semyonov  <Dmitry.Semyonov@oktet.ru>

	* tc-arm.c (do_adr): Do not adjust pc by -8 if TE_WINCE is
	defined.
	(do_adrl): Likewise.

2003-12-15  Christian Groessler  <chris@groessler.org>

	* config/tc-z8k.c (struct z8k_exp): Remove, not used anywhere.
	(ctrl_table): Add "flags" keyword and some comments.
	(flag_table): Convert to uppercase.
	(get_flags_operand): Be case insensitive.
	(get_interrupt_operand): Be case insensitive.  Support notation
	where the inperrupt arguments are separated by commas.
	(get_operands): Check whether get_flags_operand consumed all
	arguments.  Return failure if get_ctrl_operand didn't recognize a
	valid control register.
	(get_specific): Add case CLASS_CTRL: Test for valid control
	register for ldctlb opcode.
	(build_bytes): Check for valid control registers.

2003-12-15  Nick Clifton  <nickc@redhat.com>

	* config/obj-aout.c (obj_crawl_symbol_chain): Skip defined
	symbols which resolve to symbolic values.

2003-12-13  Alan Modra  <amodra@bigpond.net.au>

	* config/obj-elf.c: Convert to C90, remove unneeded prototypes and
	casts.  Formatting.
	* config/obj-elf.h: Remove PARAMS.

	* read.c (s_lcomm_internal): Make global.
	* read.h (s_lcomm_internal): Declare.
	* config/obj-elf.c (elf_pseudo_table): Handle lcomm.
	(obj_elf_lcomm): New function.

2003-12-13  Alan Modra  <amodra@bigpond.net.au>

	* read.c: Remove unneeded prototypes.
	(s_comm): Split out code to..
	(s_comm_internal): ..here.  Tidy error returns.  Rearrange so that
	"name" from input line may be used in more places.  Merge code
	testing for valid size from elf_common.  Merge code from
	s_lcomm_internal.  Call comm_parse_extra.
	(bss_alloc): New function, split out of s_lcomm_internal and
	elf_common.
	(parse_align): Likewise.
	(s_lcomm_internal): Rewrite.
	(s_lcomm, s_lcomm_bytes): Use s_comm_internal.
	* read.h (bss_alloc, parse_align, s_comm_internal): Declare.
	* config/obj-elf.c (elf_common): Split out code to..
	(elf_common_parse): ..here.  Remove code common to s_comm_internal,
	parse_align and bss_alloc.  Rearrange and Tidy.
	* config/tc-alpha.h (TC_IMPLICIT_LCOMM_ALIGNMENT): Define.

2003-12-10  Zack Weinberg  <zack@codesourcery.com>

	* tc-ppc.c (md_assemble): Rewrite comment about optional operands
	to indicate that 'all or none' is also handled.  Pluralize a
	word in another comment.

2003-12-10  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (FPU_MAVERICK): Define.
	(FPU_ARCH_MAVERICK): Define.
	(arm_float_abi): Define.
	(mfloat_abi_opt): New variable.
	(md_begin): Use them.
	(arm_opts): Add msoft-float and mhard-float.
	(arm_cpus): Use FPU_ARCH_MAVERICK.
	(arm_fpus): Add maverick.
	(arm_float_abis): Add.
	(arm_parse_float_abi): New function.
	(arm_long_options): Add mfloat-abi.
	* doc/as.texinfo: Document -mfloat-abi=.
	* doc/c-arm.text: Ditto. Menution -fpu=maverick.

2003-12-09  Paul Brook  <paul@codesourcery.com>

	* config/tc-arm.c (do_umaal): Fix typo.

2003-12-06  Kazu Hirata  <kazu@cs.umass.edu>

	* dwarf2dbg.c: Convert to ISO-C.
	* write.c: Likewise.
	* write.h: Likewise.

2003-12-06  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-mips.c (macro): Switch misordered call to frag_grow()
	and setting of tc_fr_offset.

2003-12-05  Ricardo Anguiano <anguiano@codesourcery.com>
	    Mark Mitchell  <mark@codesourcery.com>
	    Richard Earnshaw  <rearnsha@arm.com>

	Add V6 support.
	* config/tc-arm.c (ARM_EXT_V6): New macro.
	(ARM_ARCH_V6): Likewise.
	(SHIFT_IMMEDIATE): Likewise.
	(SHIFT_LSL_OR_ASR_IMMEDIATE): Likewise.
	(SHIFT_ASR_IMMEDIATE): Likewise.
	(SHIFT_LSL_IMMMEDIATE): Likewise.
	(do_cps): New function.
	(do_cpsi): Likewise.
	(do_ldrex): Likewise.
	(do_pkhbt): Likewise.
	(do_pkhtb): Likewise.
	(do_qadd16): Likewise.
	(do_rev): Likewise.
	(do_rfe): Likewise.
	(do_sxtah): Likewise.
	(do_sxth): Likewise.
	(do_setend): Likewise.
	(do_smlad): Likewise.
	(do_smlald): Likewise.
	(do_smmul): Likewise.
	(do_ssat): Likewise.
	(do_usat): Likewise.
	(do_srs): Likewise.
	(do_ssat16): Likewise.
	(do_usat16): Likewise.
	(do_strex): Likewise.
	(do_umaal): Likewise.
	(do_cps_mode): Likewise.
	(do_cps_flags): Likewise.
	(do_endian_specifier): Likewise.
	(do_pkh_core): Likewise.
	(do_sat): Likewise.
	(do_sat16): Likewise.
	(insns): Add V6 instructions.
	(do_t_cps): New function.
	(do_t_cpy): Likewise.
	(do_t_setend): Likewise.
	(THUMB_CPY): New macro.
	(tinsns): Add V6 instructions.
	(decode_shift): Handle V6 restricted-shift options.
	(thumb_mov_compare): Support CPY.
	(arm_cores): Add arm1136js and arm1136jfs.
	(arm_archs): Add armv6.
	(arm_fpus): Add arm1136jfs.
	* doc/c-arm.texi (ARM Options): Mention arm1136js, arm1136jfs, and
	armv6 options.

2003-12-06  Christian Groessler  <chris@groessler.org>

	* config/tc-z8k.c (parse_reg): Be case insensitive when checking
	register names.
	(get_ctrl_operand): Be case insensitive when checking ctrl names.

2003-12-05  Nick Clifton  <nickc@redhat.com>

	* config/tc-sh.c (md_show_usage): Fix compilation errors
	introduced by the previous delta.

2003-12-03  Alexandre Oliva  <aoliva@redhat.com>

	* config/tc-sh.c: Add support for sh4a and no-fpu variants.
	* testsuite/gas/sh/basic.exp: Call tests for sh4a.
	* testsuite/gas/sh/{err-sh4a-fp.s, err-sh4a.s,
	err-sh4al-dsp.s, sh4a-dsp.d, sh4a-dsp.s, sh4a-fp.d,
	sh4a-fp.s, sh4a.d, sh4a.s, sh4al-dsp.d, sh4al-dsp.s:
	New files, tests for sh4a and related variants.

2003-12-05  Michael Snyder  <msnyder@redhat.com>

	* config/tc-sh.c (md_show_usage): Mention new -isa options.
	* doc/c-sh.texi: Document new -isa options.
	* doc/c-sh64.texi: Ditto.
	* NEWS: Mention new support for sh4a.

2003-12-03  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-alpha.c (s_alpha_end): Don't crash if there is no
	matching .ent.

2003-12-04  Alan Modra  <amodra@bigpond.net.au>

	* tc.h (md_pcrel_from): Don't declare if defined as a macro.

2003-12-03  Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>

	* config/tc-m32r.h : Add support for new machine m32r2.
	* config/tc-m32r.c : Likewise.
	Add new command line switches and directives to allow endian-ness
	to be selected and some warnings to be turned into errors.
	(line_separator_chars) : Use '!'.
	* doc/c-m32r.texi: Document new switches and directives.
	* NEWS: Mention new support.

2003-12-03  Dave Airlie  <airlied@linux.ie>

	* configure.in: Likewise.
	* configure: Regenerate.
	* config/tc-vax.c (md_shortopts): Add 'Q'.
	(md_parse_option): Ignore 'Q' for now.

2003-12-02  Kazu Hirata  <kazu@cs.umass.edu>

	* messages.c: Convert to ISO-C.
	* obj.h: Likewise.
	* output-file.c: Likewise.
	* output-file.h: Likewise.
	* sb.c: Likewise.
	* sb.h: Likewise.
	* stabs.c: Likewise.
	* subsegs.c: Likewise.
	* subsegs.h: Likewise.
	* tc.h: Likewise.

2003-12-02  Kazu Hirata  <kazu@cs.umass.edu>

	* config/obj-elf.c: Remove ARGSUSED.

2003-12-02  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

2003-11-30  Kazu Hirata  <kazu@cs.umass.edu>

	* symbols.c: Convert to ISO-C.
	* symbols.h: Likewise.

2003-11-28  Christian Groessler  <chris@groessler.org>

	* config/tc-z8k.c: Convert to ISO-C.
	* config/tc-z8k.h: Likewise.

2003-11-27  Kazu Hirata  <kazu@cs.umass.edu>

	* read.c: Convert to ISO-C.
	* read.h: Likewise.

2003-11-27  Nick Clifton  <nickc@redhat.com>

	* config/tc-sh.c (sh_elf_cons): If md_cons_align is defined
	call it to make sure that the constants that are going to be
	emitted are correctly aligned.

2003-11-27  Alexandre Oliva  <aoliva@redhat.com>

	* config/tc-frv.c (md_pcrel_from_section): Don't adjust when
	referencing symbol in a different section.

2003-11-26  Christian Groessler  <chris@groessler.org>

	* config/tc-z8k.c (s_segm): Fix indentation.
	(md_apply_fix3): Likewise.
	(cc_names): Add alias names for the names generated by the
	disassembler.
	(get_cc_operand): Be case insensitive.
	(get_operands): Improve error handling for cc operands.
	(check_operand): Not used, remove.
	(md_assemble): Remove unused variable prev_opcode.  Skip
	whitespace until end-of-line only.  Restore *op_end after call to
	hash_find.

2003-11-26  Nick Clifton  <nickc@redhat.com>

	* config/tc-h8300.c (get_operand): Allow er4-er7 for ldm/stm
	instructions on the H8SX.

2003-11-25  Kazu Hirata  <kazu@cs.umass.edu>

	* config/tc-h8300.c (h8_exp): Remove.

2003-11-25  Asgari Jinia  <asgarij@kpitcummins.com>

	* config/tc-h8300.c (md_assemble): Check operands validity for
	ldm/stm.
	(get_operand): Check register pair's validity as per technical
	note TN-H8*-193A/E from Renesas for H8s and for H8Sx manual.

2003-11-24  Kazu Hirata  <kazu@cs.umass.edu>

	* listing.c: Convert to ISO-C.
	* listing.h: Likewise.
	* macro.c: Likewise.
	* macro.h: Likewise.

2003-11-24  Jakub Jelinek  <jakub@redhat.com>

	* app.c (do_scrub_chars): Add PUT (ch) and ch = GET ()
	when transitioning from states 14 or 15 to 0 or 1.

2003-11-23  Kazu Hirata  <kazu@cs.umass.edu>

	* hash.c: Convert to ISO-C.
	* hash.h: Likewise.
	* input-file.c: Likewise.
	* input-file.h: Likewise.
	* input-scrub.c: Likewise.
	* itbl-ops.c: Likewise.
	* itbl-ops.h: Likewise.

2003-11-23  Kazu Hirata  <kazu@cs.umass.edu>

	* config/tc-h8300.c (Hmode): Make it global.
	(Smode): Likewise.
	(Nmode): Likewise.
	(SXmode): Likewise.

2003-11-22  Kazu Hirata  <kazu@cs.umass.edu>

	* ehopt.c: Convert to ISO-C.
	* emul.h: Likewise.
	* expr.c: Likewise.
	* expr.h: Likewise.
	* flonum-copy.c: Likewise.
	* flonum-mult.c: Likewise.
	* flonum.h: Likewise.
	* frags.c: Likewise.
	* frags.h: Likewise.

2003-11-22  Alan Modra  <amodra@bigpond.net.au>

	* doc/c-ppc.texi (PowerPC-Pseudo): Add section.

	* app.c (do_scrub_chars): Revert 2003-04-23 and 2003-04-22.

2003-11-21  Kazu Hirata  <kazu@cs.umass.edu>

	* ecoff.c: Convert to ISO-C.
	* ecoff.h: Likewise.

2003-11-22  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ppc.c (parse_cpu): New function, broken out from..
	(md_parse_option): ..here.
	(ppc_setup_opcodes): New function, broken out from..
	(md_begin): ..here.
	(ppc_machine): Implement .machine pseudo op.

2003-11-20  Kazu Hirata  <kazu@cs.umass.edu>

	* depend.c: Convert to ISO-C.
	* dwarf2dbg.c: Likewise.
	* dwarf2dbg.h: Likewise.

2003-11-20  Kazu Hirata  <kazu@cs.umass.edu>

	* app.c: Convert to ISO-C.
	* as.h: Likewise.
	* atof-generic.c: Likewise.
	* bignum-copy.c: Likewise.
	* bignum.h: Likewise.
	* cgen.c: Likewise.
	* cgen.h: Likewise.
	* cond.c: Likewise.

2003-11-20  DJ Delorie  <dj@redhat.com>

	* config/tc-sh64.c (shmedia_frob_section): Only frob elf32
	sections.

2003-11-19  Kazu Hirata  <kazu@cs.umass.edu>

	* config/tc-h8300.c: Make some functions and global
	variables static appropriately.

2003-11-19  Kazu Hirata  <kazu@cs.umass.edu>

	* config/obj-ieee.c: Remove duplicate prototypes.
	* config/tc-h8300.c: Likewise.

2003-11-19  Kazu Hirata  <kazu@cs.umass.edu>

	* config/tc-h8300.c: Convert to ISO-C.
	* config/tc-h8300.h: Likewise.

2003-11-19  Kazu Hirata  <kazu@cs.umass.edu>

	* config/tc-mcore.h: Remove prototypes already in tc.h.
	* config/tc-tic4x.c: Likewise.

2003-11-19  Kazu Hirata  <kazu@cs.umass.edu>

	* config/tc-arc.c: Remove a local prototype of atof_ieee.
	* config/tc-ip2k.c: Likewise.
	* config/tc-iq2000.c: Likewise.
	* config/tc-tic30.c: Remove a comment.

2003-11-19  Bob Wilson  <bob.wilson@acm.org>

	* config/tc-xtensa.c (xg_emit_insn): Include "dwarf2dbg.h" and add
	call to dwarf2_emit_insn.

2003-11-18  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

	* config/tc-mips.c (macro): Handle new macros: "lca" and "dlca"
	for loading addresses using CALL relocations.
	Don't emit CALL relocations when a base register is used.

2003-11-15  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

	* config/tc-mips.c: Formatting fixes.

2003-11-14  Ben Elliston  <bje@wasabisystems.com>

	* config/tc-arm.c (arm_elf_change_section): Not static.

2003-11-13  Nick Clifton  <nickc@redhat.com>

	* tc-arm.c (mapping_state): New function.  Emit a mapping
	symbol if necessary.
	(arm_elf_change_section): New function.  Intercept section
	changes and generate mapping symbols.
	(s_bss): Likewise.
	(s_arm_elf_cons): Likewise.
	(opcode_select): Choose the correct mapping state.
	(md_assemble): Likewise.
	* tc-arm.h (md_elf_section_change_hook): Define.
	* doc/c-arm.texi (ARM Mapping Symbols): New node.
	* NEWS: Mention new feature.

2003-11-12  Daniel Jacobowitz  <drow@mvista.com>

	* Makefile.am (install, install-info, RECURSIVE_TARGETS): Define.
	* doc/Makefile.am (install-info): Define.

	* aclocal.m4: Regenerate.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.

2003-11-11  Dmitry Semyonov <Dmitry.Semyonov@oktet.ru>

	* configure.in: Add support for arm-wince-pe target.
	* configure: Regenerate.

2003-11-11  Jan Hubicka  <jh@suse.cz>

	* config/tc-i386.c (tc_i386_fix_adjustable):

2003-11-10  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ia64.c (ia64_handle_align): Remove bogus be_nop.

2003-11-10  Alan Modra  <amodra@bigpond.net.au>

	* README: Update bug report address.  Move bug reporting info to
	binutils/README.

2003-11-07  Christian Groessler  <chris@groessler.org>

	* doc/c-z8k.texi: Document command-line options.  Fix byte
	register names.  Document '.z8001' and '.z8002' directives.
	Extend addressing modes documentation.

2003-11-07  Jonathan R. Grant  <jg-binutils@jguk.org>

	* input-file.c (input_file_open): Use "No such file" error
	message.

2003-11-06  Pete Gonzalez  <pgonzalez@bluel.com>

	* config/tc-arm.texi (struct reg_entry): Add new field 'builtin'.
	(rn_table, iwmmxt_table, cp_table, cn_table, fn_table, sn_table,
	dn_table, mav_mvf_table, mac_mvd_table, mav_mvfx_table,
	mav_mvax_table, mav_dspc_table): Initialise new field.
	(insert_reg_alias): Initialise new field.
	(md_pseudo_table): Add "unreq" entry.
	(s_unreq): New function: Undo the effects of a previous .req.
	* doc/c-arm.texi: Document new pseudo op.
	* NEWS: Mention new feature.

2003-11-06  Bruno Rohee  <bruno@rohee.com>

	* config/obj-vms.c: Fix "the the" typo.
	* doc/c-arm.texi: Likewise.

2003-11-06  Nick Clifton  <nickc@redhat.com>

	* config/obj-vms.c: Convert to ISO-C.

2003-11-05  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ppc.h (TC_FORCE_RELOCATION): Only define for ELF and XCOFF.

2003-10-31  Christian Groessler  <chris@groessler.org>

	* config/tc-i860.c (md_pcrel_from): Fix typo in comment.

2003-10-29  Phil Edwards  <phil@codesourcery.com>

	* configure.in (arm-*-vxworks, i386-*-vxworks, mips-*-vxworks,
	ppc-*-vxworks, ppc-*-windiss):  Remove separate outdated stanzas.
	(*-*-vxworks, *-*-windiss):  Use common stanzas, all ELF.
	* configure:  Regenerated.

2003-10-27  Kazu Hirata  <kazu@cs.umass.edu>

	* ChangeLog: Fix typos.
	* ChangeLog-9295: Likewise.
	* as.c: Fix comment typos.
	* as.h: Likewise.
	* atof-generic.c: Likewise.
	* bit_fix.h: Likewise.
	* frags.h: Likewise.
	* hash.c: Likewise.
	* input-file.c: Likewise.
	* input-scrub.c: Likewise.
	* itbl-ops.c: Likewise.
	* itbl-parse.y: Likewise.
	* listing.c: Likewise.
	* macro.h: Likewise.
	* read.c: Likewise.
	* sb.c: Likewise.
	* sb.h: Likewise.
	* symbols.c: Likewise.
	* symbols.h: Likewise.

2003-10-27  Stephane Carrez  <stcarrez@nerim.fr>

	* config/tc-m68hc11.c: Convert to ISO C90.
	* config/tc-m68hc11.h: Likewise.

2003-10-26  Kazu Hirata  <kazu@cs.umass.edu>

	* doc/c-sh64.texi: Fix a typo.

2003-10-26  Kazu Hirata  <kazu@cs.umass.edu>

	* doc/c-alpha.texi: Fix typos.
	* doc/c-ia64.texi: Likewise.
	* doc/c-mmix.texi: Likewise.
	* doc/c-sh64.texi: Likewise.
	* doc/c-xtensa.texi: Likewise.
	* doc/internals.texi: Likewise.

2003-10-24  H.J. Lu  <hongjiu.lu@intel.com>

	* config/obj-elf.c (obj_elf_change_section): Allow SHF_ALLOC
	for .interp, .strtab and .symtab. Use specified section
	attributes.

2003-10-22  Andreas Schwab  <schwab@suse.de>
	    H.J. Lu  <hongjiu.lu@intel.com>
	    Jim Wilson <wilson@specifixinc.com>

	* config/tc-ia64.c (update_qp_mutex): New.
	(note_register_values): Properly handle one of PRs in compare
	is PR0. Don't add a mutex relation for .and.orcm/.or.andcm.
	Clear mutex relation for .none/.unc. Don't clear mutex relation
	on predicated compare.

2003-10-21  Wouter van Heyst <wouter@vidicode.nl>

	* config/tc-arm.c (all_reg_maps): Correct text describing Maverick
	register requirements.
	(md_begin): Remove F_SOFT_FLOAT if enabling MAVERICK FP.

2003-10-21  Peter Barada  <pbarada@mail.wm.sps.mot.com>
	    Bernardo Innocenti  <bernie@develer.com>

	* config/tc-m68k.c: Add MCF528x (MCFv4) support.
	* config/m68k-parse.h: Likewise.
	* NEWS: Mention the new support.
	* doc/c-m68k.texi: Document new processor selection switch.

2003-10-19  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (normalize_constant_expr): New function to fix sign
	extensions broken by gas' expression evaluation of constants.
	(check_absolute_expr): Use it.
	(mips_ip): Likewise.

2003-10-18  Hans-Peter Nilsson  <hp@bitrange.com>

	Generate BFD_RELOC_MMIX_PUSHJ_STUBBABLE for PUSHJ when possible.
	* doc/c-mmix.texi (MMIX-Opts): Document --no-pushj-stubs and
	--no-stubs.
	* config/tc-mmix.c: Include limits.h.  Expand on mmix_relax_table
	comment.
	(expand_op, mmix_next_semicolon_is_eoln): Fix head comment.
	(pushj_stubs): New variable.
	(OPTION_NOPUSHJSTUBS, STATE_PUSHJSTUB, PUSHJSTUB_MIN)
	(PUSHJSTUB_MAX): New macros.
	(md_longopts): New options "--no-pushj-stubs" and synonym
	"--no-stubs".
	(mmix_relax_table): Handle new entry for STATE_PUSHJSTUB.
	(md_parse_option): Handle OPTION_NOPUSHJSTUBS.
	(md_estimate_size_before_relax): Modify STATE_PUSHJ state for
	PUSHJ stub relaxation.
	(md_convert_frag): Handle STATE_PUSHJSTUB.
	(md_apply_fix3): Handle BFD_RELOC_MMIX_PUSHJ_STUBBABLE.
	(tc_gen_reloc): Ditto.
	(mmix_md_relax_frag): Handle PUSHJ stub relaxation.
	* config/tc-mmix.h (TC_SEGMENT_INFO_TYPE): Define.
	(struct mmix_segment_info_type): New.

2003-10-17  Paul Dale  <pauli@snapgear.com>
	    Bernardo Innocenti  <bernie@develer.com>

	* config/tc-m68k.c (make_pcrel_absolute): Enforce
	PC-relative jumps with --pcrel.
	(md_convert_frag_1): Likewise.
	(md_create_long_jump): Likewise.

2003-10-17  Shrinivas Atre  <shrinivasa@KPITCummins.com>

	* config/tc-h8300.c (PSIZE): Correct for Normal mode.
	(get_operand): Accept both 16 bit 32 bit registers as pointer
	registers, when operating in Normal mode.
	(fix_operand_size): Make default address size 16 for Normal mode.

2003-10-17  Ian Lance Taylor  <ian@wasabisystems.com>

	* config/tc-arm.c (do_iwmmxt_byte_addr): Reject control
	registers.
	(do_iwmmxt_word_addr): With a control register, reject conditional
	execution and reject a non-word size.

2003-10-16  Peter Bergner  <bergner@vnet.ibm.com>

	* configure.in: Set em=linux for ppc-*-linux-gnu* target.
	* configure: Regenerate.

2003-10-15  Alan Modra  <amodra@bigpond.net.au>

	* doc/as.texinfo (Align): Correct list of byte targets.

2003-10-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (macro_build_ldst_constoffset,load_register,macro):
	Fix indentation. Better error message.

2003-10-14  Bob Wilson  <bob.wilson@acm.org>

	* config/tc-xtensa.c (xtensa_create_property_segments): Remove bfd
	argument in call to xtensa_get_property_section_name.  Formatting.

2003-10-11  Kaz Kojima  <kkojima@rr.iij4u.or.jp>

	* config/tc-sh.h (sh_coff_reloc_mangle): Delete an extra
	parenthesis.

2003-10-11  Kaz Kojima  <kkojima@rr.iij4u.or.jp>

	* config/tc-sh.c: Convert to ISO C90.  Remove unnecessary
	prototypes and casts.
	* config/tc-sh.h: Likewise.
	* config/tc-sh64.c: Likewise.
	* config/tc-sh64.h: Likewise.

2003-10-08  Dave Brolley  <brolley@redhat.com>

	* config/tc-frv.c (fr550_check_insn_acc_range): New function.
	(fr550_check_acc_range): New function.
	(md_assemble): Call fr550_check_acc_range.

2003-10-08  Dave Brolley  <brolley@redhat.com>

	* config/tc-frv.c: Handle DEFAULT_CPU_FR550.
	(md_parse_option): Handle OPTION_CPU==fr550.
	(md_show_usage): Document fr550.

2003-10-08  Philippe De Muyter  <phdm@macqel.be>

	* as.c (use_gnu_debug_info_extensions) : New variable.
	(parse_args) : Accept new --gstabs+ option, and set
	`use_gnu_debug_info_extensions'.
	(show_usage) : Document --gstabs+ option.
	* as.h (use_gnu_debug_info_extensions) : New extern declaration.
	* stabs.c (stabs_generate_asm_file) : If
	`use_gnu_debug_info_extensions' is set, add the compilation
	directory to the stabs debug info.
	* doc/as.texinfo : Document --gstabs+ option.
	* NEWS: Mention new feature.

2003-10-06  Matt Thomas  <matt@3am-software.com>

	Switch NetBSD/hppa to use Linux PA-RISC ELF ABI and
	assembler syntax.

	* tc-hppa.c: Add "%farg[0-3]", "%fret", "%t[1-4]", "%tf[1-4]"
	register names.  Change all "defined (TE_LINUX)" to
	"(defined (TE_LINUX) || defined (TE_NETBSD))".

	* tc-hppa.h: Make NetBSD use "elfXX-hppa-linux" bfd target.
	Remove NetBSD's use of LABELS_WITHOUT_COLONS.

2003-10-06  Robert Millan  <robertmh@gnu.org>

	* configure.in: Match GNU/KNetBSD with new knetbsd*-gnu triplet.
	* configure: Regenerate.

2003-10-05  Nick Clifton  <nickc@redhat.com>

	* as.c (parse_args): Revert patch to change handling of -f
	option.  Its behaviour is mandated by the POSIX 2 spec.

2003-10-04  Christian Groessler  <chris@groessler.org>

	* tc-z8k.c (newfix): Tell fix_new_exp about pc relativeness.
	(md_apply_fix3): Fix R_JR, R_DISP7, and R_CALLR cases.
	(md_pcrel_from): This function now gets called. Supply return
	value.

2003-10-04  Nick Clifton  <nickc@redhat.com>

	* as.c: Convert to ISO C90.

2003-10-04  Nick Clifton  <nickc@redhat.com>

	* as.c (std_shortopts): Remove 'f'.
	(std_longopts): Add 'f'.  Doing this prevents -f<foo> being
	acecpted as an alias for -f.

2003-10-04  Danny Smith  <danny_r_smith_2001@yahoo.co.nz>

	* config/obj-coff.c (obj_coff_section [BEF_ASSEMBLER]):
	Make 'r' mean readonly data.

2003-10-01  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (macro_build_ldst_constoffset,load_register,macro):
	Unbreak overflow checks.

2003-10-01  Chris Demetriou  <cgd@broadcom.com>

	* config/tc-mips.c (s_cpreturn): Correct errors in comment.

2003-10-01  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (macro_build_ldst_constoffset): Fix sign extension
	tests.
	(load_register): Likewise.
	(macro): Likewise.

2003-09-30  Chris Demetriou  <cgd@broadcom.com>

	* config/tc-mips.c (mips_ip): Capitalize first word of
	existing condition code warning, and add condition code
	warnings for .ps instructions, and for bc1any[24][tf].

2003-09-30  Chris Demetriou  <cgd@broadcom.com>

	* NEWS: Mention support for MIPS64 Release 2.

2003-09-30  Chris Demetriou  <cgd@broadcom.com>

	* NEWS: Add an indication of the cutoff for 2.14.

2003-09-30  Chris Demetriou  <cgd@broadcom.com>

	* configure.in (mipsisa64r2, mipsisa64r2el, mipsisa64r2*): New CPUs.
	* configure: Regenerate.
	* config/tc-mips.c (imm2_expr): New variable.
	(md_assemble, mips16_ip): Initialize imm2_expr.
	(ISA_HAS_64BIT_REGS, ISA_HAS_DROR, ISA_HAS_ROR): Add ISA_MIPS64R2.
	(macro_build): Handle +A, +B, +C, +E, +F, +G, and +H format operands.
	(macro): Handle M_DEXT and M_DINS.
	(validate_mips_insn): Handle +E, +F, +G, +H, and +I format operands.
	(mips_ip): Likewise.
	(OPTION_MIPS64R2): New define.
	(md_longopts): New entry for -mips64r2 (OPTION_MIPS64R2).
	OPTION_ASE_BASE): Increase to compensate for OPTION_MIPS64R2.
	(md_parse_option): Handle OPTION_MIPS64R2.
	(s_mipsset): Handle setting "mips64r2" ISA.
	(mips_cpu_info_table): Add mips64r2.
	(md_show_usage): Document -mips64r2 option.
	* doc/as.texinfo: Docuemnt -mips64r2 option.
	* doc/c-mips.texi: Likewise.

2003-09-27  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* config/tc-hppa.c (pa_ip): Check for invalid 64-bit conditions.

2003-09-26  Matt Thomas  <matt@3am-software.com>

	* config/tc-vax.c (md_shortopts): Fix a typo.  Remove 'K'.
	(OPTION_PIC): Define.
	(md_longopts): Add "pic" option.
	(md_parse_option): Change 'K' to OPTION_PIC.

2003-09-23  Alan Modra  <alan@modra.org>

	* config/obj-elf.c (obj_elf_change_section): Adjust for
	_bfd_elf_get_sec_type_attr changes.  Allow SHF_MERGE and SHF_STRINGS
	to be set when defaults are not.  Don't set attr from defaults if
	old_sec.

2003-09-18  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (macro_build_ldst_constoffset): Don't silently
	truncate values which won't fit im 32 bits.
	(load_register): Likewise.
	(macro): Likewise.

2003-09-17  Dmitry Diky <diwil@mail.ru>

	* config/tc-msp430.c (MAX_OP_LEN): Set to 256.
	(msp430_operands): Remove redundant l2[16] within switch-case.

2003-09-16  Ralf Corsepius  <corsepiu@faw.uni-ulm.de>

	* configure.in: Handle arm-*-rtems* and thumb-*rtems*.
	* configure: Regenerate.

2003-09-14  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (HAVE_64BIT_ADDRESS_CONSTANTS): Remove.
	(macro_build_ldst_constoffset): Sign-extend 32-bit constants. Change
	the function prototype.
	(load_register): Likewise. Simplify the checks for sign-extended
	constants.
	(macro): Likewise. Fix code generation for 64-bit address constants
	outside the 32-bit compatibility space. Adjust
	macro_build_ldst_constoffset calls.
	(s_cprestore): Adjust macro_build_ldst_constoffset call.

2003-09-11  Bob Wilson  <bob.wilson@acm.org>

	* config/tc-xtensa.c (insn_labels, free_insn_labels, saved_insn_labels,
	literal_syms): New global variables.
	(xtensa_define_label, add_target_symbol, xtensa_find_label,
	map_over_defined_symbols, is_loop_target_label,
	xtensa_mark_target_fragments, xtensa_move_frag_symbol,
	xtensa_move_frag_symbols, defined_symbols, branch_targets): Delete.
	(xtensa_begin_directive): Call md_flush_pending_output.  Move symbols
	from insn_labels to saved_insn_labels when entering a literal region.
	(xtensa_end_directive): Call md_flush_pending_output.  Restore
	insn_labels list when leaving a literal region.
	(xtensa_literal_position): Call xtensa_clear_insn_labels.
	(xtensa_literal_pseudo): Add check to disallow .literal inside a
	literal region.  Move insn_labels to saved_insn_labels and then restore
	insn_labels on exit.
	(xg_add_branch_and_loop_targets): Replace add_target_symbol calls with
	code to set is_loop_target or is_branch_target flag on the symbol
	(xtensa_create_literal_symbol): Call xtensa_add_literal_sym.
	(xtensa_add_literal_sym, xtensa_add_insn_label,
	xtensa_clear_insn_labels): New functions.
	(xtensa_move_labels): Remove old_frag and old_offset arguments.  Add
	loops_ok argument.  Rewrite to use insn_labels list instead of
	calling xtensa_find_label and to check the is_loop_target flag on
	symbols when loops_ok is false.
	(xtensa_frob_label): Remove call to xtensa_define_label.  Add call
	to either xtensa_add_literal_sym or xtensa_add_insn_label.  Adjust
	call to xtensa_move_labels.  Propagate is_branch_target and
	is_loop_target flags from symbols to frags.
	(xtensa_flush_pending_output): Call xtensa_clear_insn_labels.
	(md_assemble): Use xtensa_move_labels with loops_ok = FALSE when
	aligning a loop instruction.  Adjust call to xtensa_move_labels for
	aligning entry instructions.  Add call to xtensa_clear_insn_labels.
	(xtensa_end): Remove call to xtensa_mark_target_fragments.
	(xtensa_move_literals): Replace xtensa_move_frag_symbols call with
	code to use new literal_syms list.
	* config/tc-xtensa.h (xtensa_symfield_type): Add is_loop_target and
	is_branch_target flags.

2003-09-09  Bob Wilson  <bob.wilson@acm.org>

	* config/tc-xtensa.c (xtensa_mark_literal_pool_location): Remove
	"move_labels" argument and corresponding call to xtensa_move_labels.
	(md_assemble): Add a separate call to xtensa_move_labels and remove
	argument for call to xtensa_mark_literal_pool_location.
	(xtensa_literal_position, xtensa_switch_to_literal_fragment): Fix
	calls to xtensa_mark_literal_pool_location.
	(xtensa_create_local_symbol): Delete and inline the code into...
	(xtensa_create_literal_symbol): ...here.
	(xtensa_frob_label): Combine conditionals.
	(expression_maybe_register, xtensa_symbol_new_hook,
	fix_new_exp_in_seg): Use symbol_get_tc.

2003-09-09  Bob Wilson  <bob.wilson@acm.org>

	* config/tc-xtensa.c (xtensa_literal_pseudo): Remove code for
	combining identical literals.
	(expression_maybe_register): Remove call to find_lit_sym_translation.
	(is_duplicate_expression, cache_literal, is_duplicate_literal,
	add_lit_sym_translation, find_lit_sym_translation): Delete.

2003-09-07  Nick Clifton  <nickc@redhat.com>

	* doc/as.texinfo (Comments): Comment character for PPC is #.

2003-09-06  Stephane Carrez  <stcarrez@nerim.fr>

	PR savannah/4358:
	* config/tc-m68hc11.c (s_m68hc11_relax): Use 2 for size to avoid
	overflow complain.

2003-09-05  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-frv.c (md_pcrel_from_section): Heed TC_FORCE_RELOCATION.

2003-09-04  Nick Clifton  <nickc@redhat.com>

	* config/tc-v850.c (set_machine): Accept v850e1 machine number.
	(md_pseudo_table): Add .v850e1 pseudo op.
	(md_show_usage): Document -mv850e1 switch.
	(md_parse_option): Accept -mv850e1 switch.
	(md_begin): Allow TARGET_CPU to be v850e1.
	* doc/c-v850.texi: Document -mv850e1 switch and .v850e1 pseudo op.
	* NEWS: Mention support for v850e1.

2003-09-04  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ppc.c (md_parse_option): Add PPC_OPCODE_ANY to existing
	ppc_cpu selection rather than replacing.
	(ppc_set_cpu): Ignore and preserve PPC_OPCODE_ANY in ppc_cpu.
	(md_begin): When PPC_OPCODE_ANY, insert all opcodes in ppc_hash.

2003-09-03  Robert Millan  <robertmh@gnu.org>

	* configure.in: Match GNU/KFreeBSD with new kfreebsd*-gnu
	triplet.
	* configure: Regenerate.

2003-09-02  Daniel Jacobowitz  <drow@mvista.com>

	* configure.in: Update AC_PREREQ to 2.57.  Use AC_CONFIG_FILES
	and AC_CONFIG_COMMANDS instead of the three-argument AC_OUTPUT.
	Specify AC_CONFIG_AUX_DIR.
	* aclocal.m4: Regenerated with aclocal-1.7.
	* configure: Regenerated with autoconf 2.57.
	* Makefile.in, doc/Makefile.in: Regenerated with automake-1.7.

2003-08-29  Jakub Jelinek  <jakub@redhat.com>

	* dw2gencfi.c (cfi_pseudo_table): Add cfi_window_save.
	(dot_cfi, output_cfi_insn): Handle DW_CFA_GNU_window_save.
	(output_cie): Don't use DW_EH_PE_pcrel if neither DIFF_EXPR_OK
	nor tc_cfi_emit_pcrel_expr are defined.
	(output_fde): Use tc_cfi_emit_pcrel_expr if available and
	DIFF_EXPR_OK is not defined.
	* config/tc-sparc.h (TARGET_USE_CFIPOP): Define.
	(tc_cfi_frame_initial_instructions, tc_regname_to_dw2regnum,
	tc_cfi_emit_pcrel_expr): Define.
	(sparc_cfi_frame_initial_instructions, sparc_regname_to_dw2regnum,
	sparc_cfi_emit_pcrel_expr): New prototypes.
	(sparc_cie_data_alignment): New decl.
	(DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Define.
	* config/tc-sparc.c: Include dw2gencfi.h.
	(sparc_cie_data_alignment): New variable.
	(md_begin): Initialize it.
	(sparc_cfi_frame_initial_instructions): New function.
	(sparc_regname_to_dw2regnum): Likewise.
	(sparc_cfi_emit_pcrel_expr): Likewise.
	* doc/as.texinfo: Document .cfi_window_save.

	* config/tc-sparc.c (s_common): Cast last argument to long and
	change format string to shut up warning.

2003-08-25  Jason Eckhardt  <jle@rice.edu>

	* doc/c-i860.texi: Update text about relocatable address expansions.

2003-08-24  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c (md_assemble): Use isrc2 from the original
	instruction when expanding E_ADDR.

2003-08-21  Nick Clifton  <nickc@redhat.com>

	* po/tr.po: Updated Turkish translation.

2003-08-20  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ppc.c (md_parse_option): Add PPC_OPCODE_ISEL and
	PPC_OPCODE_RFMCI to -m440 selected ppc_cpu.

2003-08-19  Nick Clifton  <nickc@redhat.com>

	* config/tc-arm.c (cp_address_required_here): Add code to handle
	unindexed addressing mode.

2003-08-19  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ppc.c (md_parse_option): Handle -m440.
	(md_show_usage): Add -m440.
	(md_apply_fix3): Warning fix.
	* doc/c-ppc.texi: Document -m440.

2003-08-16  Benjamin Kalytta  <bkausbk@web.de>

	* read.c (s_print): Check for NULL.

2003-08-16  Alan Modra  <amodra@bigpond.net.au>

	* write.c (fixup_segment): When handling an expression involving
	the subtraction of two symbols in the same segment, don't clear
	fx_pcrel except for TC_M68K.

2003-08-14  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-i386.h: Remove BFD_ASSEMBLER tests and all !BFD_ASSEMBLER
	code.
	* config/tc-i386.c: Likewise.
	(RELOC_ENUM): Don't define.  Replace throughout with enum.

	* dep-in.sed: Remove libintl.h.  Ignore include/fopen-*.h
	* Makefile.am (POTFILES.in): Unset LC_COLLATE.
	Run "make dep-am".
	* Makefile.in: Regenerate.

2003-08-08  Andreas Schwab  <schwab@suse.de>

	* config/tc-m68k.h (TARGET_USE_CFIPOP)
	(DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT)
	(tc_regname_to_dw2regnum, tc_cfi_frame_initial_instructions):
	Define.
	* config/tc-m68k.c: Include "dw2gencfi.h".
	(tc_m68k_regname_to_dw2regnum)
	(tc_m68k_frame_initial_instructions): New functions.

2003-08-08 Dmitry Diky <diwil@mail.ru>

	* config/tc-msp430.c: Add xW42 and xE42 parts. Sort MPU list
	according to gcc order.

2003-08-07  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c (i860_check_label): New function.
	* config/tc-i860.h (i860_check_label): New prototype.
	(tc_check_label): Define macro as i860_check_label.

2003-08-06  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c (s_align_wrapper): New function and prototype.
	(md_pseudo_table): Change s_align_bytes to s_align_wrapper, remove
	surrounding OBJ_ELF ifdef, and re-format slightly.
	* doc/c-i860.texi: Document the special .align syntax available
	in Intel mode.

2003-08-06  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c (i860_handle_align): New function.
	* config/tc-i860.h (HANDLE_ALIGN): Define macro.
	(MAX_MEM_FOR_RS_ALIGN_CODE): Define macro.

2003-08-06  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c (i860_process_insn): Check that instructions
	with their dual-bit set are 8-byte aligned.

2003-08-06  Nick Clifton  <nickc@redhat.com>

	* po/fr.po: Updated French translation.

2003-08-05  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c (i860_process_insn): Don't handle dual-bit
	setting during flop argument parsing.  Instead, do it after
	instruction is fully parsed.

2003-08-05  Jason Eckhardt  <jle@rice.edu>

	* doc/c-i860.texi: Mention that .dual, .enddual, and .atmp
	directives are only available in Intel syntax mode.

2003-08-05  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c (s_dual): Accept .dual directive only in
	the Intel syntax mode.
	(s_enddual): Likewise for .enddual.
	(s_atmp): Likewise for .atmp.

2003-08-04  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-i386.c (i386_intel_operand): Always call i386_index_check
	for memory operands.  Pass the full operand_string to i386_index_check.

2003-08-01  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c: Remove SYNTAX_SVR4 macro and occurrences.
	(target_intel_syntax): Declare variable.
	(OPTION_INTEL_SYNTAX): Declare macro.
	(md_longopts): Add option -mintel-syntax.
	(md_parse_option): Set target_intel_syntax.
	(md_show_usage): Add -mintel-syntax usage.
	(md_begin): Set reg_prefix based on target_intel_syntax.
	(i860_process_insn): Skip register prefix only if there is one.
	Parse relocatable expressions in either Intel or AT&T syntax based
	on target_intel_syntax instead of the SYNTAX_SVR4 macro.
	* doc/c-i860.texi: Document -mintel-syntax option and give blurb
	about the differences in syntax.

2003-08-01  Dmitry Diky  <diwil@mail.ru>

	* config/tc-msp430.c (msp430_srcoperand): Extend 'push' bug workaround
	to all arches.

2003-07-30  J"orn Rennecke <joern.rennecke@superh.com>

	* config/tc-sh.c (md_assemble): For branches, check & update
	valid_arch here.

2003-07-30  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c: Convert to ISO C90.

2003-07-30  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

	* read.c (s_space): Revert 2003-07-28 change.

2003-07-30  Alan Modra  <amodra@bigpond.net.au>

	* config/obj-elf.c (obj_elf_change_section): Allow "x" for .note*.

2003-07-29  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-sh.c (tc_gen_reloc): Test for R_SH_IND12W only when ELF.

2003-07-29  Jakub Jelinek  <jakub@redhat.com>

	* config/tc-ppc.c (md_apply_fix3): Fix check for lq insns.

2003-07-28  H.J. Lu  <hongjiu.lu@intel.com>

	* config/obj-elf.c (obj_elf_section_type): Also accept "note".

2003-07-28  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

	* read.c (s_space): Don't warn about .space 0.

2003-07-28  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

	* config/tc-mips.c (mips_flag_pdr): Define.
	(md_begin) [OBJ_ELF]: Use it to control .pdr creation.
	(s_mips_end) [OBJ_ELF]: Likewise.
	(md_longopts) [OBJ_ELF]: Define OPTION_PDR, OPTION_NO_PDR.
	(md_parse_option) [OBJ_ELF]: Handle them.
	(md_show_usage) [OBJ_ELF]: Document -mpdr, -mno-pdr.

	* doc/c-mips.texi (MIPS Opts): Document -mpdr, -mno-pdr.
	* doc/as.texinfo (Overview) [MIPS]: Likewise.

2003-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* config/obj-elf.c (obj_elf_change_section): Update
	elf_section_type and elf_section_flags only when they are
	specified.

2003-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* config/obj-elf.c (obj_elf_change_section): Always set section
	type and flags.

2003-07-25  H.J. Lu  <hongjiu.lu@intel.com>

	* config/obj-elf.c (special_sections): Removed.
	(obj_elf_change_section): Call _bfd_elf_get_sec_type_attr. Set
	elf_section_type and elf_section_flags.
	(elf_frob_file): Set SHT_GROUP.

	* config/obj-elf.h (obj_sec_set_private_data): New.

	* config/tc-alpha.h (ELF_TC_SPECIAL_SECTIONS): Removed.
	* config/tc-ia64.h: Likewise.
	* config/tc-m32r.h: Likewise.
	* config/tc-m68hc11.h: Likewise.
	* config/tc-mcore.h: Likewise.
	* config/tc-mips.h: Likewise.
	* config/tc-ppc.h: Likewise.
	* config/tc-sh64.h: Likewise.
	* config/tc-v850.h: Likewise.
	* config/tc-xtensa.h: Likewise.

	* config/tc-v850.h (SHF_V850_GPREL): Removed.
	(SHF_V850_EPREL): Likewise.
	(SHF_V850_R0REL): Likewise.

	* subsegs.c (subseg_get): Call obj_sec_set_private_data if it
	is defined.

2003-07-24  Stephane Carrez  <stcarrez@nerim.fr>

	* config/tc-m68hc11.h (DWARF2_ADDR_SIZE): Use 32-bit address for
	debugging symbols so that we handle page memory correctly.

2003-07-24  Nick Clifton  <nickc@redhat.com>

	* po/fr.po: Updated French translation.

2003-07-23  Daniel Jacobowitz  <drow@mvista.com>

	* config/tc-arm.c (arm_archs): Add iwmmxt.

2003-07-22  H.J. Lu <hongjiu.lu@intel.com>

	* read.c (do_parse_cons_expression): Mark nbytes unused to
	silence gcc.

2003-07-22  Alexandre Oliva  <aoliva@redhat.com>

	* config/tc-h8300.c (get_specific): No PCREL8 encoding for bsr/bc
	or bsr/bs.

	* config/tc-h8300.c (md_assemble): Make sure characters after
	slash and dot are lower-case.

2003-07-17  Nick Clifton  <nickc@redhat.com>

	* po/es.po: New Spanish translation.
	* po/tr.po: New Turkish translation.
	* po/opcodes.pot: Regenerate.

2003-07-16  Alan Modra  <amodra@bigpond.net.au>

	* dwarf2dbg.c (get_frag_fix): Revert 2001-11-15 change.
	(generic_dwarf2_emit_offset): Don't define function when
	TC__DWARF2_EMIT_OFFSET is defined.

2003-07-15  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-mips.c (hilo_interlocks): True for CPU_RM7000.
	(mips_cpu_info_table): Add rm7000 and rm9000 entries.
	* doc/c-mips.texi: Document -march=rm9000.

2003-07-15  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-v850.c (md_assemble): When no reloc, create pcrel fixups
	only for V850_OPERAND_DISP operands.

2003-07-15  Alan Modra  <amodra@bigpond.net.au>

	* frags.c (frag_more): Move segment checks to..
	(frag_alloc_check): ..here.  New function.
	(frag_append_1_char): Call frag_alloc_check.

2003-07-14  Nick Clifton  <nickc@redhat.com>

	* po/tr.po: Update with latest version.
	* po/POTFILES.in: Regenerate.
	* po/gas.pot: Regenerate.
	* configure: Regenerate.

2003-07-14  Nick Clifton  <nickc@redhat.com>

	* config/tc-ip2k.c: Remove inclusion of <ctype.h>
	* config/tc-tic4x.c: Replace inclusion of <ctype.h> with
	"safe-ctype.h" and update use of macros.
	* Makefile.am: Update dependencies.
	* Makefile.in: Regenerate.

2003-07-11  Alan Modra  <amodra@bigpond.net.au>

	* po/gas.pot: Regenerate.

2003-07-10  Jakub Jelinek  <jakub@redhat.com>

	* config/tc-ppc.h (DWARF2_LINE_MIN_INSN_LENGTH): Define always.
	(TARGET_USE_CFIPOP, tc_cfi_frame_initial_instructions,
	tc_regname_to_dw2regnum, DWARF2_DEFAULT_RETURN_COLUMN,
	DWARF2_CIE_DATA_ALIGNMENT): Define.
	(ppc_cfi_frame_initial_instructions, tc_ppc_regname_to_dw2regnum): New
	prototypes.
	(ppc_cie_data_alignment): Declare.
	* config/tc-ppc.c: Include dw2gencfi.h.
	(ppc_cie_data_alignment): Define.
	(md_begin): Initialize ppc_cie_data_alignment.
	(ppc_cfi_frame_initial_instructions, tc_ppc_regname_to_dw2regnum): New
	functions.
	* config/tc-s390.h (DWARF2_LINE_MIN_INSN_LENGTH): Define always.
	(TARGET_USE_CFIPOP, tc_cfi_frame_initial_instructions,
	tc_regname_to_dw2regnum, DWARF2_DEFAULT_RETURN_COLUMN,
	DWARF2_CIE_DATA_ALIGNMENT): Define.
	(s390_cfi_frame_initial_instructions, tc_s390_regname_to_dw2regnum):
	New prototypes.
	(s390_cie_data_alignment): Declare.
	* config/tc-s390.c: Include dw2gencfi.h.
	(s390_cie_data_alignment): Define.
	(md_begin): Initialize s390_cie_data_alignment.
	(s390_cfi_frame_initial_instructions, tc_s390_regname_to_dw2regnum):
	New functions.

2003-07-10  Alexandre Oliva  <aoliva@redhat.com>

	2002-12-12  Alexandre Oliva  <aoliva@redhat.com>
	* config/tc-mn10300.h (EXTERN_FORCE_RELOC): Don't define to zero.
	2001-05-09  Alexandre Oliva  <aoliva@redhat.com>
	* configure.in (am33_2.0, mn10300-*-linux*): Added.
	* configure: Rebuilt.
	* config/tc-mn10300.h (TARGET_FORMAT) [TE_LINUX]: Define to
	elf32-am33lin.
	* config/tc-mn10300.c (md_begin) [TE_LINUX]: Choose AM33/2.0
	by default.

2003-07-09  Alexandre Oliva  <aoliva@redhat.com>

	2003-02-25  Alexandre Oliva  <aoliva@redhat.com>
	* config/tc-mn10300.c (mn10300_check_fixup): Set GOT_PCREL type
	for subtracts from GLOBAL_OFFSET_TABLE that could not be
	simplified.
	2002-07-18  Alexandre Oliva  <aoliva@redhat.com>
	* config/tc-mn10300.c (mn10300_check_fixup): Accept subtracts that
	could not be simplified.
	(tc_gen_reloc): Turn an absolute fx_subsy into part of fx_offset.
	2001-11-04  Alexandre Oliva  <aoliva@redhat.com>
	* config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Don't adjust
	BDF_RELOC_MN10300_GOT32.
	* config/tc-mn10300.c (mn10300_fix_adjustable): If
	TC_RELOC_RTSYM_LOC_FIXUP doesn't hold, it's not adjustable.
	2001-05-09  Alexandre Oliva  <aoliva@redhat.com>
	* config/tc-mn10300.c (mn10300_parse_name): Don't return a
	symbol if we know its value.
	2001-05-09  Alexandre Oliva  <aoliva@redhat.com>
	* config/tc-mn10300.h (GLOBAL_OFFSET_TABLE_NAME): Remove
	duplicate underscore prefix.
	2001-05-09  Alexandre Oliva  <aoliva@redhat.com>
	* config/tc-mn10300.c (mn10300_parse_name): Store relocation
	type in X_md, not X_add_number.  Zero X_add_number.
	(mn10300_check_fixup): Extract relocation type from X_md.
	* config/tc-mn10300.h: Update comment.
	2001-04-14  Alexandre Oliva  <aoliva@redhat.com>
	* config/tc-mn10300.h (O_GOTOFF, O_PLT, O_GOT): Replace with...
	(O_PIC_reloc): this.
	* config/tc-mn10300.c (mn10300_PIC_related_p): Use it.
	(mn10300_check_fixup): Likewise.
	(mn10300_parse_name): Set X_add_number to relocation type.
	* config/tc-mn10300.h (DIFF_EXPR_OK, GLOBAL_OFFSET_TABLE_NAME,
	TC_RELOC_RTSYM_LOC_FIXUP, md_parse_name, TC_CONS_FIX_NEW,
	O_GOTOFF, O_PLT, O_GOT): Define.
	* config/tc-mn10300.c (mn10300_PIC_related_p): New fn.
	(mn10300_check_fixup): New fn.
	(md_assemble): Call it.  Check for PIC-related relocs.
	(mn10300_cons_fix_new): Likewise.  New fn.
	(mn10300_end_of_match): New fn.
	(mn10300_md_parse_name_cont): New fn.

2003-07-09  Alexandre Oliva  <aoliva@redhat.com>

	2000-05-25  Alexandre Oliva  <aoliva@cygnus.com>
	* config/tc-mn10300.c (mn10300_insert_operand): Negate negative
	accumulator's shift.
	2000-05-08  Alexandre Oliva  <aoliva@cygnus.com>
	* config/tc-mn10300.c (md_relax_table, md_convert_frag,
	md_assemble, md_estimate_size_before_relax): Handle fbCC.
	2000-04-20  Alexandre Oliva  <aoliva@cygnus.com>
	* config/tc-mn10300.c (HAVE_AM33): Redefine in terms of
	HAVE_AM33_2.
	2000-04-03  Alexandre Oliva  <aoliva@cygnus.com>
	* config/tc-mn10300.c (md_pseudo_table): Use AM33_2 constant.
	(HAVE_AM33): Match AM33_2 too.
	(HAVE_AM33_2): New macro.
	(md_assemble): Use it.  Match 2.0 registers only if HAVE_AM33_2.
	2000-04-01  Alexandre Oliva  <aoliva@cygnus.com>
	* config/tc-mn10300.c (md_pseudo_table): Added `am33_2'.
	(float_registers, double_registers): New variables.
	(float_register_name, double_register_name): New functions.
	(md_assemble): Recognize FP registers.  Implement FMT_D3.
	(mn10300_insert_operand): Support FP registers.

2003-07-08  Chris Demetriou  <cgd@broadcom.com>

	* config/tc-mips.c (mips_validate_fix): Do not warn about branch
	target being a global symbol if not compiling SVR4 PIC code.

2003-07-07  Nick Clifton  <nickc@redhat.com>

	* doc/c-m32r.texi (M32R-Directives): New node.  Document the
	.high, .shigh and .low directives.

2003-07-07  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-h8300.c (h8300sxnmode): Add prototype.
	(DSYMMODE): Remove.
	(parse_exp): Replace expressionS argument with a h8_op.  Parse the
	operand size as well.
	(skip_colonthing): Remove unused expression argument.  Tighten checks
	for 2-digit sizes.
	(colonmod24): Remove.
	(get_mova_operands): Combine calls to parse_exp and skip_colonthing.
	(get_operand): Likewise.  Use the standard code to read the size of
	pc-relative operands.
	(fix_operand_size): Include the size-guessing logic that used to be
	in colonmod24 and get_operand.  Don't apply dd:2 optimizations to
	offsets with a symbolic component.

2003-07-04  Nick Clifton  <nickc@redhat.com>

	* config/tc-i386.c (tc_x86_regname_to_dw2regnum): Use ARRAY_SIZE
	macro to compute size of selected register name array.

2003-07-01  Martin Schwidefsky  <schwidefsky@de.ibm.com>

	* config/tc-s390.c (md_parse_option): Add cpu type z990.
	(md_begin): Add minimal cpu type logic for instructions with different
	binary format depending on the cpu.
	(md_assemble): Remove check for minimal cpu.
	(s390_insert_operand): Add support for long displacements.
	(md_gather_operands): Likewise.
	(tc_s390_fix_adjustable): Likewise.
	(tc_s390_force_relocation): Likewise.
	(md_apply_fix3): Likewise.

2003-06-30  Chris Demetriou  <cgd@broadcom.com>

	* config/tc-mips.c (s_mipsset): Implement -march= handling
	differently.

2003-06-30  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c: Convert to ISO C90 prototypes. Remove unnecessary
	prototypes and casts. Replace PTR with void *. Reformat.
	* config/tc-mips.h: Likewise.

2003-06-30  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ia64.c (note_register_values): Warning fix.
	* config/tc-mips.c (append_insn): Likewise.

2003-06-29  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (mips_set_options,mips_opts): Support for
	.set arch=FOO.
	(file_mips_arch): Rename mips_arch.
	(mips_arch_info,mips_tune_info): Remove.
	(hilo_interlocks,gpr_interlocks,cop_interlocks): Use mips_opts.arch.
	(mips_cpu_info_from_arch): New function.
	(md_begin): Use file_mips_arch.
	(macro_build,macro,mips_ip): Use mips_opts.arch.
	(mips_set_architecture): Init file_mips_arch and mips_opts.arch.
	(mips_after_parse_args): Remove mips_arch_info and mips_tune_info.
	Use file_mips_arch.
	(s_mipsset): Support for .set arch=FOO.
	(mips_cpu_info_table): Fix typo.

2003-06-26  H.J. Lu <hongjiu.lu@intel.com>

	* config/tc-i386.c (md_assemble): Declare "exp" before "if".

2003-06-25  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-h8300.c (get_specific): Allow ':8' to be used for
	unsigned 8-bit operands.

2003-06-24  Nick Clifton  <nickc@redhat.com>

	* read.c (s_comm): Change error message to assume an unsigned size
	has been passed to .comm.
	* config/tc-sparc.c (s_common): Likewise.
	* write.c (write_contents): Replace 'unsigned long' with
	'addressT' and 'long' with offsetT in order to allow computations
	with very large values to work for 64-bit addressed targets.
	(relax_and_size_all_segments): Likewise.
	(relax_frag): Likewise.
	(relax_segment): Likewise.

2003-06-23  Mark Mitchell  <mark@codesourcery.com>

	* config/tc-ppc.c (ppc_cleanup): Use bytes to count APUinfo slots.

2003-06-23  H.J. Lu <hongjiu.lu@intel.com>

	* gas/config/tc-i386.c (md_assemble): Support Intel Precott New
	Instructions.

	* gas/config/tc-i386.h (CpuPNI): New.
	(CpuUnknownFlags): Add CpuPNI.

2003-06-23    <davidm@hpl.hp.com>

	* config/tc-ia64.c (pseudo_func): Add ABI constants for linux,
	freebsd, openvms, and nsk (non-stop kernel).

2003-06-22  Jason Thorpe  <thorpej@wasabisystems.com>

	* config/tc-ns32k.c (md_begin): Initialize inst_hash_table after
	all locals have been declared.

2003-06-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (ADDRESS_ADD_INSN,ADDRESS_ADDI_INSN): Remove
	special handling for n32 ABI.
	(macro): Likewise.

2003-06-19  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (s_cpsetup,s_cprestore,s_cpreturn): Revert
	2003-06-11 change.

2003-06-19  Christian Groessler  <chris@groessler.org>

	* config/tc-z8k.c (parse_reg): Invalid registers generate an error
	now, not only a warning.  Add some more checks to detect invalid
	registers.
	(get_operand): For CLASS_IR remember register size in mode struct.
	(get_specific): Handle new CLASS_IRO type.  Add register size
	checks for CLASS_IR and CLASS_IRO.
	(md_apply_fix3): Fix undefined usage of buf.

2003-06-19  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ppc.c (ppc_csect): Pass alignment to ppc_change_csect.
	(ppc_change_csect): Add align param.  Align frag at start of csect.
	(ppc_section, ppc_named_section): Adjust ppc_change_csect calls.
	(ppc_frob_section): Align vma.

2003-06-18  Jakub Jelinek  <jakub@redhat.com>

	* dw2gencfi.c (EH_FRAME_ALIGNMENT): Define if not defined.
	(output_cie): Don't pad.
	(output_fde): Add align argument.  Pad to align if not 0.
	(cfi_finish): Set .eh_frame alignment to EH_FRAME_ALIGNMENT.
	Pad just last FDE to EH_FRAME_ALIGNMENT.

2003-06-18  Martin Schwidefsky  <schwidefsky@de.ibm.com>

	* config/tc-s390.c (init_default_arch): Make current_mode_mask
	dependent on s390_arch_size and current_cpu dependent on
	current_mode_mask.

2003-06-18  Svein E. Seldal  <Svein.Seldal@solidas.com>

	* configure.in: Add c4x as an architecture variant to tic4x.
	* configure: Regenerate.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.

2003-06-18  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ppc.c (ppc_elf_suffix): Don't remove symbols other than
	".TOC." from PPC64_TOC relocs.

2003-06-17  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ppc.c (md_apply_fix3): Allow BRTAKEN, BRNTAKEN relocs.

2003-06-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (ADDRESS_ADD_INSN,ADDRESS_ADDI_INSN,
	ADDRESS_LOAD_INSN,ADDRESS_STORE_INSN): New macros.
	(macro_build_ldst_constoffset,load_address,macro,s_cpsetup,
	s_cprestore,s_cpadd): Use them.

2003-06-16  Hans-Peter Nilsson  <hp@axis.com>

	* configure.in: Add specific case for cris-*-linux-gnu* with
	em=linux.
	* configure: Regenerate.
	* config/tc-cris.c (DEFAULT_CRIS_AXIS_LINUX_GNU): New macro, TRUE
	if TE_LINUX defined, else FALSE.
	(bfd_boolean demand_register_prefix): Set default from
	DEFAULT_CRIS_AXIS_LINUX_GNU.
	(symbols_have_leading_underscore): Similar.
	* config/tc-cris.h (LOCAL_LABELS_DOLLAR): Define to 1.

2003-06-13  Richard Earnshaw  <rearnsha@arm.com>

	* tc-arm.c (FPU_DEFAULT, case TE_LINUX): Default to FPU_ARCH_FPA.
	(FPU_DEFAULT, case TE_NetBSD): Default to FPU_ARCH_VFP for ELF,
	FPU_ARCH_FPA for AOUT.
	(md_begin): Don't try to guess the floating point architecture from
	the CPU if the OS ABI (Linux, NetBSD) mandates a particular form.

2003-06-13  Robert Millan  <zeratul2@wanadoo.es>

	* configure.in: Add i386-netbsd-gnu target.
	* configure: Regenerate.

2003-06-12  Tom Tromey  <tromey@redhat.com>

	* doc/as.texinfo (Comm): Added @node.  Moved before CFI
	directives node.

2003-06-12  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-mips.c (append_insn): In a compound relocation, take the
	field width from the final (outermost) operator.

2003-06-11  Richard Henderson  <rth@redhat.com>

	* dw2gencfi.c (struct cfi_escape_data): New.
	(cfi_add_CFA_nop): Remove.
	(CFI_escape, dot_cfi_escape): New.
	(dot_cfi): Remove nop.
	(cfi_pseudo_table): Remove nop; add escape.
	(output_cfi_insn): Likewise.
	(select_cie_for_fde): Stop on escape.
	* dw2gencfi.h (cfi_add_CFA_nop): Remove.
	* read.c, read.h (do_parse_cons_expression): New.
	* doc/as.texinfo (.cfi_escape): New.

2003-06-11  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (s_cpsetup): Use mips_frame_reg instead of SP.
	(s_cprestore): Likewise.
	(s_cpreturn): Likewise.

2003-06-11  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (tc_gen_reloc): Initialize retval amd reloc
	with zeros.

2003-06-11  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (md_pcrel_from): Return actual pcrel address.
	(md_apply_fix3): Ignore non-special relocations. Remove superfluous
	exceptions from size assert. Remove most of the addend fixup
	specialcasing. Remove value, use valP directly. simplify fx_addnumber
	handling. Remove zero addend specialcases.
	(tc_gen_reloc): Use appropriate value for reloc2 addend. Remove
	the addend fixup specialcase.
	* config/tc-mips.h (MD_APPLY_SYM_VALUE): Define as 0.

2003-06-11  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* write.c (write_relocs): Use xcalloc. Fix relocs initialization
	in the RELOC_EXPANSION_POSSIBLE case.

2003-06-11  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-i960.c (line_comment_chars): Add '#'.
	* config/tc-mn10200.c (tc_gen_reloc): Don't ignore fx_subsy.

2003-06-11  H.J. Lu <hongjiu.lu@intel.com>

	* po/Make-in (DESTDIR): New.
	(install-data-yes): Support $(DESTDIR).
	(uninstall): Likewise.

2003-06-11  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.

2003-06-10  Doug Evans  <dje@sebabeach.org>

	* cgen.c (gas_cgen_finish_insn): CGEN_INSN_RELAX renamed to
	CGEN_INSN_RELAXED.
	* config/tc-fr30.c (md_estimate_size_before_relax): Ditto.
	* config/tc-m32r.c (md_estimate_size_before_relax): Ditto.
	* config/tc-openrisc.c (md_estimate_size_before_relax): Ditto.

2003-06-10  Alan Modra  <amodra@bigpond.net.au>
	    Gary Hade <garyhade@us.ibm.com>

	* config/tc-ppc.c (md_assemble): Handle PPC_OPERAND_DQ.
	(md_apply_fix3): Special case lq insn.

2003-06-10  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-h8300.c (get_rtsl_operands): Accept unbracketed register
	lists.  Allow single-register ranges.

2003-06-10  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-h8300.c (h8300sxnmode): New.
	(md_pseudo_table): Add .h8300sxn entry.

2003-06-09  H.J. Lu <hongjiu.lu@intel.com>

	* NEWS: Updated for the new -n option for the i386 assembler.

	* config/tc-i386.c (optimize_align_code): New.
	(md_shortopts): Add 'n'.
	(md_parse_option): Handle 'n'.
	(md_show_usage): Add '-n'.

	* config/tc-i386.h (optimize_align_code): Declared.
	(md_do_align): Optimize code alignment only if optimize_align_code
	is not 0.

	* doc/as.texinfo: Add the new -n option.

	* doc/c-i386.texi: Document the new -n option.

2003-06-07  Richard Henderson  <rth@redhat.com>

	* doc/as.texinfo: Document .cfi_rel_offset.

	* dw2gencfi.c (struct cfa_save_data, cfa_save_stack): New.
	(cfi_add_CFA_offset): Detect invalid offsets.
	(cfi_add_CFA_remember_state): Save cur_cfa_offset.
	(cfi_add_CFA_restore_state): Restore it.
	(CFI_rel_offset): New.
	(cfi_pseudo_table): Add it.
	(dot_cfi): Handle it.

2003-06-07  H.J. Lu <hongjiu.lu@intel.com>

	* app.c (do_scrub_chars): Add states 14 and 15 to handle
	predicate for ia64.

2003-06-05  Michael Snyder  <msnyder@redhat.com>

	* config/tc-h8sx.c (get_specific): Distinguish h8h from h8s ops.
	(build_bytes): Ditto.

2003-06-05  Richard Sandiford  <rsandifo@redhat.com>

	* config/tc-h8sx.c (DMODE): Remove.
	(colonmod24): Don't choose a default if the operand is a 16-bit
	constant integer.
	(fix_operand_size): New function.
	(md_assemble): Use it to choose between @(d:2, ERn) and @(d:16,ERn).
	Adjust @(d:2,ERn) operands before choosing the specific opcodes.

2003-06-05  Michal Ludvig  <mludvig@suse.cz>

	* dw2gencfi.c (cfi_add_CFA_insn, cfi_add_CFA_insn_reg)
	(cfi_add_CFA_insn_reg_reg, cfi_add_CFA_insn_reg_offset): New.
	(cfi_add_CFA_offset, cfi_add_CFA_def_cfa)
	(cfi_add_CFA_register, cfi_add_CFA_def_cfa_register)
	(cfi_add_CFA_def_cfa_offset): Use cfi_add_CFA_insn_*().
	(cfi_add_CFA_restore, cfi_add_CFA_undefined)
	(cfi_add_CFA_same_value, cfi_add_CFA_remember_state)
	(cfi_add_CFA_restore_state, cfi_add_CFA_nop): New.
	(cfi_pseudo_table): New directives .cfi_return_column,
	.cfi_restore, .cfi_undefined, .cfi_same_value,
	.cfi_remember_state, .cfi_restore_state, .cfi_nop.
	(dot_cfi, output_cfi_insn): Handle new directives.
	* dw2gencfi.h (cfi_add_CFA_restore, cfi_add_CFA_undefined)
	(cfi_add_CFA_same_value, cfi_add_CFA_remember_state)
	(cfi_add_CFA_restore_state, cfi_add_CFA_nop): New prototypes.

2003-06-04  Richard Henderson  <rth@redhat.com>

	* dw2gencfi.c (output_cfi_insn): Fix typo for negative offsets.

	* dw2gencfi.c (cfi_finish): Set .eh_frame read-only.

2003-06-04  Richard Henderson  <rth@redhat.com>

	* config/tc-alpha.c (s_alpha_usepv): New.
	(md_pseudo_table): Add it.
	(alpha_cfi_frame_initial_instructions): New.
	* config/tc-alpha.h (TARGET_USE_CFIPOP): New.
	(tc_cfi_frame_initial_instructions): New.
	* doc/c-alpha.texi: Document .usepv.

2003-06-04  Jakub Jelinek  <jakub@redhat.com>

	* as.c (show_usage): Document --execstack and --noexecstack.
	(parse_args): Add --execstack and --noexecstack.
	(main): Create .note.GNU-stack section if --execstack or
	--noexecstack was given on comand line, set its SHF_EXECINSTR bit.
	* as.h (flag_execstack, flag_noexecstack): New.

2003-06-03  Chris Demetriou  <cgd@broadcom.com>

	* config/tc-mips.c: (OPTION_ARCH_BASE, OPTION_ASE_BASE)
	(OPTION_COMPAT_ARCH_BASE, OPTION_FIX_BASE)
	(OPTION_MISC_BASE): New defines.
	(OPTION_BREAK, OPTION_CONSTRUCT_FLOATS, OPTION_EB, OPTION_EL)
	(OPTION_ELF_BASE, OPTION_FIX_VR4122, OPTION_FP32, OPTION_FP64)
	(OPTION_GP32, OPTION_GP64, OPTION_M3900, OPTION_M4010, OPTION_M4100)
	(OPTION_M4650, OPTION_M7000_HILO_FIX, OPTION_MARCH, OPTION_MDMX)
	(OPTION_MEMBEDDED_PIC, OPTION_MIPS1, OPTION_MIPS16, OPTION_MIPS2)
	(OPTION_MIPS3, OPTION_MIPS32, OPTION_MIPS32R2, OPTION_MIPS3D)
	(OPTION_MIPS4, OPTION_MIPS5, OPTION_MIPS64)
	(OPTION_MNO_7000_HILO_FIX, OPTION_MTUNE, OPTION_NO_CONSTRUCT_FLOATS)
	(OPTION_NO_FIX_VR4122, OPTION_NO_M3900, OPTION_NO_M4010)
	(OPTION_NO_M4100, OPTION_NO_M4650, OPTION_NO_MDMX, OPTION_NO_MIPS16)
	(OPTION_NO_MIPS3D, OPTION_NO_RELAX_BRANCH, OPTION_RELAX_BRANCH)
	(OPTION_TRAP): Redefine in terms of new defines.
	(md_longopts): Reorder entries.

2003-05-14  Michael Snyder  <msnyder@redhat.com>
	From Bernd Schmidt  <bernds@redhat.com>
	and Michael Snyder  <msnyder@redhat.com>
	and Alexandre Oliva <aoliva@redhat.com>
	* config/tc-h8300.c: Add insns and addressing modes for h8300sx.
	* config/tc-h8300.h: Ditto.

2003-06-03  Nick Clifton  <nickc@redhat.com>

	* tc-v850.c (tc-gen_reloc): Translate BFD_RELOC_32 into
	BFD_RELOC_32_PCREL if the reloc is pc-relative.  Do this
	before calling bfd_reloc_type_lookup.

2003-06-02  Alan Modra  <amodra@bigpond.net.au>

	* read.c (emit_expr): Set dot_value.
	* dw2gencfi.c (output_fde): Remove pcrel reloc hack.

2003-06-02  Alan Modra  <amodra@bigpond.net.au>

	* macro.c (sub_actual): Don't lose string if it turns out that
	&string wasn't an arg.

2003-05-31  Richard Henderson  <rth@redhat.com>

	* dw2gencfi.c (output_fde): Use fix_new to emit pc-relative reloc.
	(cfi_finish): Set flag_traditional_format around .eh_frame data.

2003-05-29  Richard Henderson  <rth@redhat.com>

	* config/tc-alpha.c (alpha_cur_ent_sym): Remove.
	(all_frame_data, plast_frame_data, cur_frame_data): New.
	(s_alpha_ent): Record data for dwarf2 cfi.
	(s_alpha_end, s_alpha_mask, s_alpha_frame, s_alpha_prologue): Likewise.
	(alpha_elf_md_end): Emit dwarf2 cfi for ecoff unwind directives.
	* config/tc-alpha.h (md_end): New.
	(DWARF2_DEFAULT_RETURN_COLUMN): New.
	(DWARF2_CIE_DATA_ALIGNMENT): New.

2003-05-29  Nick Clifton  <nickc@redhat.com>

	* configure.in: Add i386-*-freebsd* entry.
	* configure: Regenerate.

2003-05-29  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>

	* config/tc-m32r.c: Amend comment to refer to Renesas

2003-05-27  Richard Henderson  <rth@redhat.com>

	* expr.c (make_expr_symbol): Fold FAKE_LABEL_NAME use into the
	symbol_create call.
	(current_location): Use symbol_temp_new_now.
	* stabs.c (s_stab_generic): Use symbol_temp_new.
	* symbols.c (temp_label_name): Remove.
	(symbol_temp_new, symbol_temp_make): Use FAKE_LABEL_NAME.

2003-05-27  Richard Henderson  <rth@redhat.com>

	* dw2gencfi.c, dw2gencfi.h: Rewrite from scratch.
	* as.c (main): Always call cfi_finish.
	* config/tc-i386.c (x86_dwarf2_return_column): New.
	(x86_cie_data_alignment): New.
	(md_begin): Set them.
	(tc_x86_cfi_init): Remove.
	(tc_x86_regname_to_dw2regnum): Fix 32-bit register numbers;
	return int, not unsigned long; don't as_bad here.
	(tc_x86_frame_initial_instructions): Streamline; use
	updated api.
	* config/tc-i386.h (tc_cfi_init): Remove.
	(DWARF2_DEFAULT_RETURN_COLUMN): New.
	(DWARF2_CIE_DATA_ALIGNMENT): New.

2003-05-27  Richard Henderson  <rth@redhat.com>

	* symbols.c (temp_label_name): New.
	(symbol_temp_new, symbol_temp_new_now, symbol_temp_make): New.
	(symbol_set_value_now): New.
	* symbols.h: Prototype them.
	* dwarf2dbg.c: Use them.
	(fake_label_name, symbol_new_now, set_symbol_value_now): Remove.

2003-05-23  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c (target_xp): Declare variable.
	(OPTION_XP): Declare macro.
	(md_longopts): Add option -mxp.
	(md_parse_option): Set target_xp.
	(md_show_usage): Add -mxp usage.
	(i860_process_insn): Recognize XP registers bear, ccr, p0-p3.
	(md_assemble): Don't try expansions if XP_ONLY is set.
	* doc/c-i860.texi: Document -mxp option and i860XP support.

2003-05-23  Eric Christopher  <echristo@redhat.com>

	* config/tc-mips.c (macro_build_jalr): Warning patrol.

2003-05-22  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (append_insn): Use actual relocation size for new
	fixp's.	Don't relax overflow checking for partial_inplace relocations.
	Use the actual relocation type in combined relocs, not just the type
	of the first one.
	(macro_build_jalr): Use actual relocation size for new fix.
	(s_cpsetup, s_gpdword): Likewise.

2003-05-22  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.c (macro): Don't use uninitialized tempreg.

2003-05-22  Nick Clifton  <nickc@redhat.com>

	* config/tc-xstormy16.c (md_pcrel_from_section): Do not produce
	section relative offsets for relocs that will not be based on the
	section symbol.
	(xstormy16_md_apply_fix3): Remove previous patch to this
	function.

2003-05-07  Eric Christopher  <echristo@redhat.com>

	* config/tc-mips.c (mips_abicalls): New variable.
	(md_parse_option): Use.
	(s_option): Ditto.
	(s_abicalls): Ditto.
	(mips_elf_final_processing): Set EF_MIPS_PIC and
	EF_MIPS_CPIC dependent on above.

2003-05-21  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* tc-hppa.c (hppa_symbol_chars): Remove `,' and `!'.

2003-05-21  Nick Clifton  <nickc@redhat.com>

	* config/obj-elf.c: Include dwarf2dbg.h.
	(elf_pseudo_tab): Add .file and .loc.
	* config/tc-arc.c (md_pseudo_table): Remove .file and .loc.
	* config/tc-arm.c: Likewise.
	* config/tc-h8300.c: Likewise.
	* config/tc-hppa.c: Likewise.
	* config/tc-ia64.c: Likewise.
	* config/tc-m68hc11.c: Likewise.
	* config/tc-m68k.c: Likewise.
	* config/tc-mmix.c: Likewise.
	* config/tc-mn10300.c: Likewise.
	* config/tc-ppc.c: Likewise.
	* config/tc-sh.c: Likewise.
	* config/tc-sparc.c: Likewise.
	* config/tc-v850.c: Likewise.
	* config/tc-frv.c: Likewise, and remove redundant inclusion of
	dwarf2dbg.h.
	* config/tc-ip2k.c: Likewise.
	* config/tc-iq2000.c: Likewise.
	* config/tc-xstormy16.c: Likewise.
	* config/tc-xtensa.c: Likewise.
	* Makefile.am: Regenerate dependencies.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* config.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
	* po/gas.pot: Regenerate.

2003-05-21  Nick Clifton  <nickc@redhat.com>

	* dw2gencfi.c (cfi_get_label): Use symbol_make for non
	BFD_ASSEMBLER targets.
	(cfi_startproc): Change type of saved_seg and cfi_seg to segT.
	(dot_cfi_endproc): Only call bfd_set_section_flags for targets
	defining BFD_ASSEMBLER.

2003-05-20  Michal Ludvig  <mludvig@suse.cz>

	* as.c (main): Remove tc_cfi_init().
	* dw2gencfi.c (cfi_parse_arg): Allow regnames beginning
	with '%'.
	(cfi_pseudo_table): Add "cfi_register" entry.
	(cfi_make_insn): Handle CFA_register.
	(cfi_output_insn): Ditto.
	(dot_cfi): Ditto.
	(cfi_get_label): Add 'simple' modifier to .cfi_startproc.
	(dot_cfi_endproc): Reuse already emitted CIEs.
	* testsuite/gas/cfi/cfi-i386.d: New pattern.
	* testsuite/gas/cfi/cfi-x86-64.d: Ditto.

2003-05-20  Nick Clifton  <nickc@redhat.com>

	* config/tc-xstormy16.c: Include dwarf2dbg.h.
	(md_pseudo_table): Add entries for .loc and .line.

2003-05-20  Alan Modra  <amodra@bigpond.net.au>

	* dw2gencfi.c (cfi_parse_arg): Only use tc_regname_to_dw2regnum if
	defined.
	(dot_cfi_endproc): Avoid C99 construct.

2003-05-20  Michal Ludvig  <mludvig@suse.cz>

	* dw2gencfi.c, dw2gencfi.h: New files.
	* config/tc-i386.c (tc_x86_cfi_init): New function.
	* config/tc-i386.h (TARGET_USE_CFIPOP, tc_cfi_init): New defines.
	* as.c (parse_args): Set verbose flag on --verbose.
	(main): Call tc_cfi_init()/cfi_finish().
	* as.h (verbose): New external variable.
	* read.c (pobegin): Insert CFI pops to the list.
	* symbols.c (local_symbol_make): Make symbol external.
	* symbols.h (local_symbol_make): New prototype.
	* Makefile.am: Add dw2gencfi.[ch] files.  Run "make dep-am".
	* Makefile.in: Regenerate.
	* doc/as.texinfo: Added node "CFI directives" with description of
	all implemented .cfi_* directives.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.

2003-05-19  Svein E. Seldal  <Svein.Seldal@solidas.com>

	* config/tc-tic4x.c (md_assemble): Added support for one-line parallel
	insns.
	* config/tc-tic4x.h: Added DOUBLEBAR_PARALLEL definition

2003-05-18  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c (i860_process_insn): Initialize fc after
	each opcode mismatch.

2003-05-16  Kelley Cook  <kelleycook@wideopenwest.com>

	* configure.in: Accept i[3-7]86 variants.
	* configure: Regenerate.

2003-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.h: Fix comment formatting.

2003-05-13  Hans-Peter Nilsson  <hp@axis.com>

	* read.c (old_buffer, old_input, old_limit): Remove variables.
	(read_a_source_file): Delete label contin.
	<handling #APP/#NO_APP>: Use an "sb" to push #APP expansion into
	input as with macros, instead of in separate old_* variables.
	Zero-terminate string being scrubbed.

2003-05-12  Nick Clifton  <nickc@redhat.com>

	* config/tc-xstormy16.c (skipping_fptr): New local variable.
	(md_assemble): Reset skipping_fptr.
	(md_operand): If @fptr() is followed by a minus sign, set
	skipping_fptr and ignore the fptr.  If skipping_fptr is set and an
	@fptr is detected, ignore it and reset skipping_fptr.

2003-05-11  Jason Eckhardt  <jle@rice.edu>

	* config/tc-i860.c (MAX_FIXUPS): Define.
	(struct i860_fi fi[]): New struct.
	(struct i860_it the_insn): Add above as member and move fields
	exp, reloc, pcrel and fup into i860_fi.
	(md_assemble): Replace all instances of exp, reloc, pcrel
	and fup with fi[].exp, fi[].reloc, fi[].pcrel, fi[].fup.
	Add a loop to possibly emit multiple fix-ups for each insn.
	(i860_process_insn): Likewise.
	(i860_get_expression): Likewise.
	(md_apply_fix3): Use a bitwise check for OP_IMM_U5, not equality.

2003-05-09  Martin Schwidefsky  <schwidefsky@de.ibm.com>

	* config/tc-s390.c (s390_target_format): Always call init_default_arch.

2003-05-07  H.J. Lu <hongjiu.lu@intel.com>

	* config/tc-ia64.c (alias_hash): New.
	(alias_name_hash): New.
	(secalias_hash): New.
	(secalias_name_hash): New.
	(md_pseudo_table): Add "secalias".
	(md_begin): Initialize alias_hash, alias_name_hash,
	secalias_hash and secalias_name_hash.
	(struct alias): New.
	(dot_alias): Implement .alias and .secalias directives.
	(do_alias): New.
	(ia64_adjust_symtab): New.
	(do_secalias): New.
	(ia64_frob_file): New.

	* config/tc-ia64.h (ia64_adjust_symtab): New.
	(tc_adjust_symtab): Defined.
	(ia64_frob_file): New.
	(tc_frob_file): Defined.

2003-05-07  Dmitry Diky  <diwil@mail.ru>

	* tc-msp430.c: Add missing lines to known cpus list.

2003-05-06  Alexandre Oliva  <aoliva@redhat.com>

	* configure.in (MIPS_DEFAULT_ABI): AC_DEFINE.
	* config/tc-mips.c (mips_after_parse_args): Set mips_abi to it.
	* config.in, configure: Rebuilt.

2003-05-05  H.J. Lu <hjl@gnu.org>

	* config/tc-mips.c (tc_gen_reloc): Add addend just once if
	howto->partial_inplace is false.

2003-05-05  Daniel Jacobowitz  <drow@mvista.com>

	* config/tc-mips.c (mips_need_elf_addend_fixup): Remove
	symbol_used_in_reloc_p check.
	(md_apply_fix3): Remove check for howto->pcrel_offset.

2003-05-03  H.J. Lu <hjl@gnu.org>

	* config/obj-elf.c (obj_elf_parse_section_letters): Make it a
	fatal error for unknown section attribute.

	* config/tc-alpha.c (alpha_elf_section_letter): Return -1 for
	unknown section attribute.
	* config/tc-ia64.c (ia64_elf_section_letter): Likewise.
	* config/tc-ppc.c (ppc_section_letter): Likewise.

	* config/tc-ia64.c (ia64_elf_section_letter): Handle 'o'.
	(ia64_elf_section_type): Accept "unwind".

2003-05-02  H.J. Lu <hjl@gnu.org>

	* read.h (demand_copy_string): New.

	* config/tc-alpha.c (demand_copy_string): Removed.

2003-05-02  Michael Snyder  <msnyder@redhat.com>

	* write.h (FAKE_LABEL_NAME): Allow override
	(for targets that like eg. a leading dot in a local label).

2003-05-02  Nick Clifton  <nickc@redhat.com>

	* config/tc-xstormy16.c (xstormy16_md_apply_fix3): Do not bias the
	addend with the symbol's value for pc-relative relocations against
	a defined symbol - this will be done automatically.

2003-05-01  H.J. Lu <hjl@gnu.org>

	* config/obj-elf.c (obj_elf_type): Accept "notype" and
	"STT_NOTYPE".

2003-05-01  H.J. Lu <hjl@gnu.org>

	* config/tc-ia64.h (tc_canonicalize_section_name): New.

	* config/obj-elf.c (obj_elf_section_name): Call
	tc_canonicalize_section_name if it is defined.

2003-05-01  H.J. Lu <hjl@gnu.org>

	* config/tc-ia64.c (ia64_check_label): New.
	* config/tc-ia64.h (tc_check_label): New.

	* read.c (read_a_source_file): Call tc_check_label after
	creating a user-defined label if defined.

2003-05-02  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ppc.c (md_show_usage): Mention -a32, -a64, -l, -le, -b,
	-be and split strings to below 509 bytes in length.

2003-05-01  Christian Groessler <chris@groessler.org>

	* expr.h: Fix comments in operatorT typedef.
	* config/tc-z8k.c: Add 2003 to copyright message.
	Fold s_segm() and s_unseg() into one function s_segm(parm) which
	decides by the parameter.
	(md_begin): Don't set linkrelax.  Only set Z8002 default if no
	command line argument was given to select the intended
	architecure.
	(get_interrupt_operand): Warn if NOP type code is emitted.
	(newfix): New parameter 'size', forward it to 'fix_new_exp'.
	(apply_fix): Call newfix with additional 'size' parameter.
	(build_bytes): Remove unused variable 'nib'.  Detect overflow in
	4 bit immediate arguments.
	(md_longopts): Add 'linkrelax' option.
	(md_parse_option): Adapt to new s_segm function.  Set 'linkrelax'
	variable when 'linkrelax' command line option is specified.
	(md_show_usage): Display 'linkrelax' option.
	(md_apply_fix3): Fix cases R_IMM4L, R_JR, and R_IMM8.  Add cases
	R_CALLR and R_REL16.
	* config/tc-z8k.h: Undef WARN_SIGNED_OVERFLOW_WORD.

2003-04-30  H.J. Lu <hjl@gnu.org>

	* config/tc-ia64.c (ia64_number_to_chars): New function pointer.
	(ia64_float_to_chars): Likewise.
	(dot_byteorder): Set target_big_endian, ia64_number_to_chars
	and ia64_float_to_chars by tc_segment_info_data.endian from
	the current segment if byteorder == -1.
	(md_begin): Call dot_byteorder to set target_big_endian.
	(md_atof): Call ia64_float_to_chars to convert floating point.
	(ia64_float_to_chars_bigendian): New function.
	(ia64_float_to_chars_littleendian): Likewise.
	(ia64_elf_section_change_hook): Likewise.

	* config/tc-ia64.h (ia64_number_to_chars): New.
	(md_number_to_chars): Changed to (*ia64_number_to_chars)
	(ia64_elf_section_change_hook): New.
	(md_elf_section_change_hook): Defined.
	(ia64_segment_info_type): New struct.
	(TC_SEGMENT_INFO_TYPE): Defined.

2003-04-30  H.J. Lu <hjl@gnu.org>

	* config/tc-ia64.c (md_section_align): Deleted.

	* config/tc-ia64.h (SUB_SEGMENT_ALIGN): New.
	(md_section_align): New.

2003-04-30  H.J. Lu <hjl@gnu.org>

	* config/tc-ia64.c (stmt_float_cons): Fix alignment for real10
	and add real16.
	(md_pseudo_table): Add "xreal16", "xreal16.ua", "real16" and
	"real16.ua".
	(md_atof): Add 6 byte padding of zero for real16.

2003-04-29  Nick Clifton  <nickc@redhat.com>

	* config/obj-elf.c (obj_elf_symver): Skip whitespace before the
	start of a version name.

2003-04-28  Chris Demetriou  <cgd@broadcom.com>

	* configure.in (mips-*-*n*bsd*): Replace with...
	(mips-*-netbsd*, mips-*-openbsd*): These.
	* configure: Regenerate.

2003-04-28  H.J. Lu <hjl@gnu.org>

	* config/tc-hppa.c (hppa_symbol_chars): New.
	* config/tc-hppa.h (tc_symbol_chars): Likewise.

2003-04-26  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* config/tc-mips.h (TC_FORCE_RELOCATION_SUB_SAME): Define again.

2003-04-25  Chris Demetriou  <cgd@broadcom.com>

	* NEWS: Belatedly mention support for MIPS32 Release 2.

2003-04-24  Eric Christopher  <echristo@redhat.com>

	* config/tc-mips.c (nopic_need_relax): Revert previous
	change.

2003-04-24 Dhananjay Deshpande <dhananjayd@kpitcummins.com>

	* config/tc-h8300.h (DWARF2_LINE_MIN_INSN_LENGTH): New
	* config/tc-h8300.c (dwarf2dbg.h): Include
	(md_pseudo_table): Handle .loc and .file
	(md_assemble): Call dwarf2_emit_insn if BFD_ASSEMBLER.
	* Makefile.am: Add dependency on dwarf2dbg.h for h8300 targets.
	* Makefile.in: Regenerate.

2003-04-24 Dhananjay Deshpande <dhananjayd@kpitcummins.com>

	* config/tc-h8300.c (Nmode, h8300hnmode, h8300snmode): New.
	(md_pseudo_table): Add h8300hn, h8300sn.
	* config/tc-h8300.h (COFF_MAGIC): Handle h8300hn, h8300sn.
	* doc/c-h8300.texi : Add documentation for new machine directives.

2003-04-24  Nick Clifton  <nickc@redhat.com>

	* config/tc-ppc.c (ppc_symbol_chars): Define.
	* config/tc-ppc.h (tc_symbol_chars): Define.

2003-04-23  J"orn Rennecke <joern.rennecke@superh.com>

	* config/tc-sh.c: Amend comment to refer to SuperH.
	* config/tc-sh.h: Likewise.
	(LISTING_HEADER): Amend to refer to SuperH.
	* config/tc-sh64.c: Change comment to refer to SuperH.
	* config/tc-sh64.h (LISTING_HEADER): Change to refer to SuperH.
	* doc/as.texinfo [SH, GENERIC]: Amend / Change to refer to SuperH.
	* doc/c-sh.texi: Amend to refer to SuperH.
	Add SuperH architecture documentation references.
	* doc/c-sh64.texi: Change to refer to SuperH.

2003-04-23  H.J. Lu <hjl@gnu.org>

	* app.c (do_scrub_chars): More checks for valid labels.

2003-04-22  H.J. Lu <hjl@gnu.org>

	* app.c (do_scrub_chars): Check for valid label.

2003-04-22  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>

	* doc/as.texinfo: Replace references to Mitsubishi M32R with
	references to Renesas M32R.
	* doc/c-m32r.texi: Likewise.

2003-04-21  Richard Henderson  <rth@redhat.com>

	* dwarf2dbg.c (get_filenum): Skip as-yet unassigned file numbers.
	(out_file_list): Assign non-null filename after generating error.

2003-04-18  Jakub Jelinek  <jakub@redhat.com>

	* ehopt.c (check_eh_frame): For aug_size == 0
	in state_seeing_aug_size state skip the state_skipping_aug
	state.

2003-04-15  Rohit Kumar Srivastava <rohits@kpitcummins.com>

	* doc/c-h8300.texi: Replace occurrances of 'Hitachi' with
	'Renesas'.
	* doc/c-h8500.texi: Likewise.
	* doc/c-sh.texi: Likewise.
	* doc/c-sh64.texi: Likewise.
	* doc/h8.texi: Likewise.
	* config/tc-h8300.c: Likewise.
	* config/tc-h8300.h: Likewise.
	* config/tc-h8500.c: Likewise.
	* config/tc-h8500.h: Likewise.
	* config/tc-sh.c: Likewise.
	* config/tc-sh.h: Likewise.
	* config/tc-sh64.c: Likewise.
	* config/tc-sh64.h: Likewise.

2003-04-10  Alexandre Oliva  <aoliva@redhat.com>

	* config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): New.
	* config/tc-mips.c: Use signed add for n32 address arithmetic.
	(append_insn): When filling delay slots with instructions
	that have fixups that tc_gen_reloc might consider modifyable
	in variant frags, start a new frag.
	(load_address): Generate GOT_DISP with of without offset
	depending on whether symbol is local.  For -xgot, use
	GOT_PAGE/GOT_OFST or GOT_HI16/GOT_LO16.
	(macro) <M_DLA_AB, M_LA_AB>: Likewise.
	<M_JAL_A>: In NewABI, use CALL16 or GOT_DISP for small got,
	CALL_HI16/CALL_LO16 or GOT_PAGE/GOT_OFST for big got.
	<ld_st>: In NewABI with small got, always use
	GOT_PAGE/GOT_OFST, with the latter in the load/store
	instruction.  With big got, use GOT_HI16/GOT_LO16 or
	GOT_PAGE/GOT_OFST.
	(tc_gen_reloc): Adjust variant frags with GOT_DISP in NewABI.
	Add tc_frag_data.tc_fr_offset to addends.  Decay CALL16,
	GOT_OFST and GOT_DISP to GOT_DISP in NewABI.
	(md_convert_frag): Use memmove for safe copying of overlapping
	regions.

2003-04-09  Stephane Carrez  <stcarrez@nerim.fr>

	* doc/c-m68hc11.texi (M68HC11-Opts): Document -m68hcs12, -mshort,
	-mlong, -mshort-double and -mlong-double options; use table @code.
	(M68HC11-Syntax): Update to document 68HC12 operands.
	(M68HC11-Modifiers): New section for operand modifiers.
	(M68HC11-Directives): New section for specific assembler directives.
	(M68HC11-Branch): Fix Overfull hbox error.

2003-04-09  Alexandre Oliva  <aoliva@redhat.com>

	* config/tc-mips.c (macro): Add comments explaining the rationale
	for Chris' change.

2003-04-09  Chris Demetriou  <cgd@broadcom.com>

	* config/tc-mips.c (macro): Put back `+ 0x8000' in test for 64-bit
	constant address that Alexandre took out by accident.  Reject
	64-bit addresses that are not sign extensions of 32 bits only if
	we don't support 64-bit address constants.

2003-04-09  Alan Modra  <amodra@bigpond.net.au>

	* config/tc-ppc.c (md_apply_fix3): Generate ADDR16 relocs.

2003-04-08  Nick Clifton  <nickc@redhat.com>

	* as.c (perform_an_assembly_pass): If using cgen, call
	gas_cgen_begin.
	* cgen.c (gas_cgen_begin): New function.  If
	flag_signed_overflow_ok is set call cgen_set_signed_overflow_ok
	otherwise call cgen_clear_signed_overflow_ok.
	* cgen.h: Prototype gas_cgen_begin.

2003-04-07  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

	* write.c (write_relocs): Remove unused variable.

2003-04-06  Chris Demetriou  <cgd@broadcom.com>

	* config/tc-mips.c (HAVE_64BIT_ADDRESS_CONSTANTS): New.
	(macro): Use new macro to decide whether to emit constant address
	as 32 or 64 bits if addresses are 32-bit wide but registers are
	64-bit wide.

2003-04-05  Stephane Carrez  <stcarrez@nerim.fr>

	* config/tc-m68hc11.c (M6811_OP_CALL_ADDR): New internal define.
	(M6811_OP_PAGE_ADDR): New internal define.
	(get_operand): New modifier %page and %addr to obtain page and
	address part of a far-function.
	(fixup8): Use BFD_RELOC_M68HC11_PAGE for a %page modifier; don't
	complain on overflow for the BFD_RELOC_M68HC11_PAGE and truncation
	relocs.
	(fixup16): Use BFD_RELOC_M68HC11_LO16 for a %addr modifier.
	(find_opcode): Add comment.
	(md_estimate_size_before_relax): Force relocation of
	STATE_UNDEXED_OFFSET types when the symbol is not absolute.
	(tc_m68hc11_fix_adjustable): Check for BFD_RELOC_M68HC11_LO16
	instead of BFD_RELOC_LO16; temporarily make the BFD_RELOC_32
	on the symbol itself so that DWARF2 strings are merged correctly.

2003-04-04  Svein E. Seldal  <Svein.Seldal@solidas.com>

	* config/obj-coff.h (TARGET_FORMAT): Namespace cleanup, changed
	default tic4x target format to 'coff2-tic4x'.
	* config/tc-tic4x.c: Namespace cleanup. Replace s/c4x/tic4x/ and
	s/c3x/tic3x/
	* config/tc-tic4x.h: Ditto

2003-04-03  Nick Clifton  <nickc@redhat.com>

	* NEWS: Mention support for Xtensa architecture.

2003-04-02  Philip Blundell  <philb@gnu.org>

	* config/tc-arm.c (arm_force_relocation): Return 0 for OFFSET_IMM.

2003-04-02  Chris Demetriou  <cgd@broadcom.com>

	* config/tc-mips.c (macro2): Adjust implementation of
	M_ULH, M_ULHU, M_ULW, and M_ULD so that they work properly
	in the case where the source and destination registers
	are the same.

2003-04-01  Bob Wilson  <bob.wilson@acm.org>

	* Makefile.am (CPU_TYPES): Add xtensa.
	(TARGET_CPU_CFILES): Add config/tc-xtensa.c.
	(TARGET_CPU_HFILES): Add config/tc-xtensa.h.
	(xtensa-relax.o): New target.
	Run "make dep-am".
	* Makefile.in: Regenerate.
	* configure.in: Handle xtensa-*-*.  Add xtensa-relax.o to
	extra_objects for xtensa targets.
	* configure: Regenerate.
	* write.c (write_object_file): Add new md_post_relax_hook.
	* config/tc-xtensa.c: New file.
	* config/tc-xtensa.h: Likewise.
	* config/xtensa-istack.h: Likewise.
	* config/xtensa-relax.c: Likewise.
	* config/xtensa-relax.h: Likewise.
	* doc/Makefile.am (CPU_DOCS): Add c-xtensa.texi.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi: Set new XTENSA variable.
	* doc/as.texinfo: Set new Xtensa variable.  Describe
	Xtensa-specific options.  Define line comment character for
	Xtensa.  Add Xtensa processors to list of ELF targets where
	alignment is specified in bytes.  Add new Xtensa-Dependent node.
	Add acknowledgements for those contributing to the Xtensa port.
	* doc/internals.texi: Describe new md_post_relax_hook.
	* doc/c-xtensa.texi: New file.

2003-04-01  Nick Clifton  <nickc@redhat.com>
	    Richard Earnshaw  <rearnsha@arm.com>

	* config/tc-arm.c: Remove presence of (r) and (tm) symbols.
	(ARM_ARCH_IWMMXT): Simplify.
	(insns): Place iwmmx instructions in correct place in table.
	(arm_add_note): New function: Add a note entry to a .note section.
	(md_begin): Make the default architecture be unknown.
	Suppress the creation of an arm note section.

2003-03-26  Eric Christopher  <echristo@redhat.com>

	* config/tc-mips.c (nopic_need_relax): Check for S_IS_EXTERN.

2003-03-25  Stan Cox   <scox@redhat.com>
	    Nick Clifton  <nickc@redhat.com>

	Contribute support for Intel's iWMMXt chip - an ARM variant:

	* config/tc-arm.c: (ARM_CEXT_IWMMXT, ARM_ARCH_IWMMXT, WR_PREFIX,
	WC_PREFIX, REG_TYPE_IWMMXT): New constants.
	(enum wreg_type, enum iwmmxt_insn_type): New types.
	(wr_register, wc_register, wcg_register): New macros.
	(iwmmxt_table): New variable.
	(wreg_required_here, do_iwmmxt_byte_addr, do_iwmmxt_tandc,
	do_iwmmxt_tbcst, do_iwmmxt_textrc, do_iwmmxt_textrm,
	do_iwmmxt_tinsr, do_iwmmxt_tmcr, do_iwmmxt_tmcrr, do_iwmmxt_tmia,
	do_iwmmxt_tmovmsk, do_iwmmxt_tmrc, do_iwmmxt_tmrrc,
	do_iwmmxt_torc, do_iwmmxt_waligni, do_iwmmxt_wmov,
	do_iwmmxt_word_addr, do_iwmmxt_wrwr, do_iwmmxt_wrwrwcg,
	do_iwmmxt_wrwrwr, do_iwmmxt_wshufh, do_iwmmxt_wzero,
	cp_byte_address_offset, cp_byte_address_required_here,
	check_iwmmxt_insn): New	functions.
	(asm_opcode_insns): Add iWMMXt instructions.
	(md_begin): Set the mach value for iWMMXt targets.  Create a note
	section to identify iwmmxt binaries.
	(md_apply_fix3): Handle BFD_RELOC_ARM_CP_OFF_IMM_S2.
	* doc/c-arm.texi: Document the support for the iWMMXt.
	* NEWS: Mention new support.