]>
Commit | Line | Data |
---|---|---|
0fb0cc75 | 1 | # Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2002, 2003, 2007, 2008, |
7b6bb8da | 2 | # 2009, 2010, 2011 Free Software Foundation, Inc. |
c906108c SS |
3 | |
4 | # This program is free software; you can redistribute it and/or modify | |
5 | # it under the terms of the GNU General Public License as published by | |
e22f8b7c | 6 | # the Free Software Foundation; either version 3 of the License, or |
c906108c | 7 | # (at your option) any later version. |
e22f8b7c | 8 | # |
c906108c SS |
9 | # This program is distributed in the hope that it will be useful, |
10 | # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | # GNU General Public License for more details. | |
e22f8b7c | 13 | # |
c906108c | 14 | # You should have received a copy of the GNU General Public License |
e22f8b7c | 15 | # along with this program. If not, see <http://www.gnu.org/licenses/>. |
c906108c | 16 | |
c906108c SS |
17 | # This file was written by Fred Fish. (fnf@cygnus.com) |
18 | ||
19 | if $tracelevel then { | |
20 | strace $tracelevel | |
21 | } | |
22 | ||
c906108c SS |
23 | |
24 | set testfile "list" | |
25 | set binfile ${objdir}/${subdir}/${testfile} | |
26 | ||
27 | # Need to download the header to the host. | |
28 | remote_download host ${srcdir}/${subdir}/list0.h list0.h | |
29 | ||
30 | ||
31 | if { [gdb_compile "${srcdir}/${subdir}/list0.c" "${binfile}0.o" object {debug}] != "" } { | |
b60f0898 JB |
32 | untested list.exp |
33 | return -1 | |
c906108c SS |
34 | } |
35 | ||
36 | if { [gdb_compile "${srcdir}/${subdir}/list1.c" "${binfile}1.o" object {debug}] != "" } { | |
b60f0898 JB |
37 | untested list.exp |
38 | return -1 | |
c906108c SS |
39 | } |
40 | ||
41 | if { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } { | |
b60f0898 JB |
42 | untested list.exp |
43 | return -1 | |
c906108c SS |
44 | } |
45 | ||
46 | ||
47 | ||
48 | # Create and source the file that provides information about the compiler | |
49 | # used to compile the test case. | |
50 | if [get_compiler_info ${binfile}] { | |
51 | return -1; | |
52 | } | |
53 | ||
54 | # | |
55 | # Local utility proc just to set and verify listsize | |
56 | # Return 1 if success, 0 if fail. | |
57 | # | |
58 | ||
59 | set set_listsize_count 0; | |
60 | ||
61 | proc set_listsize { arg } { | |
62 | global gdb_prompt | |
63 | global set_listsize_count; | |
64 | ||
65 | incr set_listsize_count; | |
f6978de9 | 66 | if [gdb_test "set listsize $arg" ".*" "setting listsize to $arg #$set_listsize_count"] { |
c906108c SS |
67 | return 0; |
68 | } | |
69 | if { $arg <= 0 } { | |
70 | set arg "unlimited"; | |
71 | } | |
72 | ||
73 | if [gdb_test "show listsize" "Number of source lines.* is ${arg}.*" "show listsize $arg #$set_listsize_count"] { | |
74 | return 0; | |
75 | } | |
76 | return 1 | |
77 | } | |
78 | ||
79 | # | |
80 | # Test display of listsize lines around a given line number. | |
81 | # | |
82 | ||
83 | proc test_listsize {} { | |
84 | global gdb_prompt | |
085dd6e6 JM |
85 | global hp_cc_compiler |
86 | global hp_aCC_compiler | |
c906108c SS |
87 | |
88 | # Show default size | |
89 | ||
90 | gdb_test "show listsize" "Number of source lines gdb will list by default is 10.*" "show default list size" | |
91 | ||
92 | # Show the default lines | |
d7679631 FF |
93 | # Note that remote targets that have debugging info for _start available will |
94 | # list the lines there instead of main, so we skip this test for remote targets. | |
c906108c SS |
95 | # The second case is for optimized code, it is still correct. |
96 | ||
759f0f0b | 97 | if [target_info exists use_gdb_stub] { |
d7679631 FF |
98 | runto_main; |
99 | unsupported "list default lines around main"; | |
100 | } else { | |
101 | gdb_test "list" "(1\[ \t\]+#include \"list0.h\".*10\[ \t\]+x = 0;|2.*11\[ \t\]+foo .x\[+)\]+;)" "list default lines around main" | |
102 | } | |
c906108c SS |
103 | |
104 | # Ensure we can limit printouts to one line | |
105 | ||
085dd6e6 | 106 | if [set_listsize 1] { |
c906108c | 107 | gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"" "list line 1 with listsize 1" |
c906108c SS |
108 | gdb_test "list 2" "2\[ \t\]+" "list line 2 with listsize 1" |
109 | } | |
110 | ||
111 | # Try just two lines | |
112 | ||
113 | if [ set_listsize 2 ] { | |
d4f3574e | 114 | gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 1 with listsize 2" |
c906108c | 115 | gdb_test "list 2" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 2 with listsize 2" |
085dd6e6 | 116 | gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+" "list line 3 with listsize 2" |
c906108c SS |
117 | } |
118 | ||
119 | # Try small listsize > 1 that is an odd number | |
120 | ||
121 | if [ set_listsize 3 ] { | |
d4f3574e | 122 | gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+int main \[)(\]+" "list line 1 with listsize 3" |
085dd6e6 | 123 | gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+int main \[)(\]+" "list line 2 with listsize 3" |
085dd6e6 | 124 | gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+int main \[(\]+\[)\]+\r\n4\[ \t\]+\{" "list line 3 with listsize 3" |
c906108c SS |
125 | } |
126 | ||
127 | # Try small listsize > 2 that is an even number. | |
128 | ||
129 | if [ set_listsize 4 ] then { | |
d4f3574e SS |
130 | gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 1 with listsize 4" |
131 | gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 2 with listsize 4" | |
c906108c SS |
132 | |
133 | gdb_test "list 3" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 3 with listsize 4" | |
134 | gdb_test "list 4" "2\[ \t\]+\r\n.*5\[ \t\]+int x;.*" "list line 4 with listsize 4" | |
135 | } | |
136 | ||
137 | # Try a size larger than the entire file. | |
138 | ||
139 | if [ set_listsize 100 ] then { | |
085dd6e6 | 140 | gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*\r\n4\[23\]\[ \t\]+\}" "list line 1 with listsize 100" |
c906108c | 141 | |
085dd6e6 | 142 | gdb_test "list 10" "1\[ \t\]+#include \"list0.h\".*\r\n4\[23\]\[ \t\]+\}" "list line 10 with listsize 100" |
c906108c SS |
143 | } |
144 | ||
145 | # Try listsize of 0 which suppresses printing. | |
146 | ||
147 | set_listsize 0 | |
148 | gdb_test "list 1" "" "listsize of 0 suppresses output" | |
149 | ||
150 | # Try listsize of -1 which is special, and means unlimited. | |
151 | ||
152 | set_listsize -1 | |
153 | setup_xfail "*-*-*" | |
154 | gdb_test "list 1" "1\[ \t\]+#include .*\r\n39\[ \t\]+\}" "list line 1 with unlimited listsize" | |
155 | } | |
156 | ||
157 | # | |
158 | # Test "list filename:number" for C include file | |
159 | # | |
160 | ||
161 | proc test_list_include_file {} { | |
162 | global gdb_prompt | |
163 | ||
c906108c | 164 | setup_xfail_format "COFF" |
d4f3574e | 165 | gdb_test "list list0.h:1" "1\[ \t\]+/\[*\]+ An include file .*10\[ \t\]+bar \\(x\\+\\+\\);" "list line 1 in include file" |
c906108c | 166 | |
c906108c | 167 | setup_xfail_format "COFF" |
085dd6e6 | 168 | gdb_test "list list0.h:100" "Line number 95 out of range; .*list0.h has 3\[67\] lines." "list message for lines past EOF" |
c906108c SS |
169 | } |
170 | ||
171 | # | |
172 | # Test "list filename:number" for C source file | |
173 | # | |
174 | ||
175 | proc test_list_filename_and_number {} { | |
176 | global gdb_prompt | |
177 | ||
178 | set testcnt 0 | |
179 | ||
180 | send_gdb "list list0.c:1\n" | |
181 | gdb_expect { | |
d4f3574e | 182 | -re "1\[ \t\]+#include \"list0.h\".*10\[ \t]+x = 0;\r\n$gdb_prompt $" { |
c906108c SS |
183 | incr testcnt |
184 | } | |
185 | -re ".*$gdb_prompt $" { fail "list list0.c:1" ; gdb_suppress_tests } | |
186 | timeout { fail "list list0.c:1 (timeout)" ; gdb_suppress_tests } | |
187 | } | |
188 | send_gdb "list list0.c:10\n" | |
189 | gdb_expect { | |
190 | -re "5\[ \t\]+int x;.*14\[ \t\]+foo .x\[+)\]+;\r\n$gdb_prompt $" { | |
191 | incr testcnt | |
192 | } | |
193 | -re ".*$gdb_prompt $" { fail "list list.c:10" ; gdb_suppress_tests } | |
194 | timeout { fail "list list.c:10 (timeout)" ; gdb_suppress_tests } | |
195 | } | |
196 | send_gdb "list list1.c:1\n" | |
197 | gdb_expect { | |
085dd6e6 | 198 | -re "1\[ \t\]+\#include.*4\[ \t\]+.*int oof\[ \t\]*\(.*\);\r\n.*$gdb_prompt $" { |
c906108c SS |
199 | incr testcnt |
200 | } | |
201 | -re ".*$gdb_prompt $" { fail "list list1.c:1" ; gdb_suppress_tests } | |
202 | timeout { fail "list list1.c:1 (timeout)" ; gdb_suppress_tests } | |
203 | } | |
204 | send_gdb "list list1.c:12\n" | |
205 | gdb_expect { | |
085dd6e6 | 206 | -re "12\[ \t\]+long_line \[(\]+.*\[)\]+;.*13\[ \t\]+\}\r\n.*$gdb_prompt $" { |
c906108c SS |
207 | incr testcnt |
208 | } | |
209 | -re ".*$gdb_prompt $" { fail "list list1.c:12" ; gdb_suppress_tests } | |
210 | timeout { fail "list list1.c:12 (timeout)" ; gdb_suppress_tests } | |
211 | } | |
212 | pass "list filename:number ($testcnt tests)" | |
213 | gdb_stop_suppressing_tests; | |
214 | } | |
215 | ||
216 | # | |
217 | # Test "list function" for C source file | |
218 | # | |
219 | ||
220 | proc test_list_function {} { | |
221 | global gdb_prompt | |
c906108c SS |
222 | |
223 | # gcc appears to generate incorrect debugging information for code | |
224 | # in include files, which breaks this test. | |
225 | # SunPRO cc is the second case below, it's also correct. | |
d4f3574e | 226 | gdb_test "list main" "(5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;|1\[ \t\]+#include .*10\[ \t\]+x = 0;)" "list function in source file 1" |
c906108c SS |
227 | |
228 | # Ultrix gdb takes the second case below; it's also correct. | |
229 | # SunPRO cc is the third case. | |
085dd6e6 | 230 | gdb_test "list bar" "(4\[ \t\]+void.*\[ \t\]*long_line.*;.*bar.*9\[ \t\]*.*|1\[ \t\]+void.*8\[ \t\]+\}|1\[ \t\]+void.*7\[ \t\]*long_line ..;|7\[ \t\]+void.*14\[ \t\]+\})" "list function in source file 2" |
c906108c SS |
231 | |
232 | # Test "list function" for C include file | |
233 | # Ultrix gdb is the second case, still correct. | |
234 | # SunPRO cc is the third case. | |
c906108c SS |
235 | gdb_test "list foo" "(3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;|2\[ \t\]+including file.*11\[ \t\]+bar \[(\]+.*\[)\]+;|1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;)" "list function in include file" |
236 | } | |
237 | ||
238 | proc test_list_forward {} { | |
239 | global gdb_prompt | |
240 | ||
241 | set testcnt 0 | |
242 | ||
243 | send_gdb "list list0.c:10\n" | |
244 | gdb_expect { | |
245 | -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } | |
246 | -re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests } | |
247 | timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests } | |
248 | } | |
249 | ||
250 | send_gdb "list\n" | |
251 | gdb_expect { | |
252 | -re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } | |
253 | -re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests } | |
254 | timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests } | |
255 | } | |
256 | ||
257 | send_gdb "list\n" | |
258 | gdb_expect { | |
259 | -re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } | |
260 | -re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests } | |
261 | timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests } | |
262 | } | |
263 | ||
264 | send_gdb "list\n" | |
265 | gdb_expect { | |
085dd6e6 | 266 | -re "35\[ \t\]+foo \\(.*\\);.*42\[ \t\]+.*\}\r\n$gdb_prompt $" { incr testcnt } |
c906108c SS |
267 | -re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests } |
268 | timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests } | |
269 | } | |
270 | ||
271 | pass "successive list commands to page forward ($testcnt tests)" | |
272 | gdb_stop_suppressing_tests; | |
273 | } | |
274 | ||
a0b3c4fd JM |
275 | # Test that repeating the list linenum command doesn't print the same |
276 | # lines over again. Note that this test makes sure that the argument | |
277 | # linenum is dropped, when we repeat the previous command. 'x/5i $pc' | |
278 | # works the same way. | |
279 | ||
280 | proc test_repeat_list_command {} { | |
281 | global gdb_prompt | |
282 | ||
283 | set testcnt 0 | |
284 | ||
285 | send_gdb "list list0.c:10\n" | |
286 | gdb_expect { | |
287 | -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } | |
288 | -re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests } | |
289 | timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests } | |
290 | } | |
291 | ||
292 | send_gdb "\n" | |
293 | gdb_expect { | |
294 | -re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } | |
295 | -re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests } | |
296 | timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests } | |
297 | } | |
298 | ||
299 | send_gdb "\n" | |
300 | gdb_expect { | |
301 | -re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } | |
302 | -re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests } | |
303 | timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests } | |
304 | } | |
305 | ||
306 | send_gdb "\n" | |
307 | gdb_expect { | |
308 | -re "35\[ \t\]+foo \\(.*\\);.*42\[ \t\]+.*\}\r\n$gdb_prompt $" { incr testcnt } | |
309 | -re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests } | |
310 | timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests } | |
311 | } | |
312 | ||
313 | pass "repeat list commands to page forward using 'return' ($testcnt tests)" | |
314 | gdb_stop_suppressing_tests; | |
315 | } | |
316 | ||
c906108c SS |
317 | proc test_list_backwards {} { |
318 | global gdb_prompt | |
319 | ||
320 | set testcnt 0 | |
321 | ||
322 | send_gdb "list list0.c:33\n" | |
323 | gdb_expect { | |
085dd6e6 | 324 | -re "28\[ \t\]+foo \\(.*\\);.*37\[ \t\]+\}\r\n$gdb_prompt $" { incr testcnt } |
c906108c SS |
325 | -re ".*$gdb_prompt $" { fail "list list0.c:33" ; gdb_suppress_tests } |
326 | timeout { fail "list list0.c:33 (timeout)" ; gdb_suppress_tests } | |
327 | } | |
328 | ||
329 | send_gdb "list -\n" | |
330 | gdb_expect { | |
331 | -re "18\[ \t\]+foo \[(\]+.*\[)\]+;.*27\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } | |
332 | -re ".*$gdb_prompt $" { fail "list 18-27" ; gdb_suppress_tests } | |
333 | timeout { fail "list 18-27 (timeout)" ; gdb_suppress_tests } | |
334 | } | |
335 | ||
336 | send_gdb "list -\n" | |
337 | gdb_expect { | |
338 | -re "8\[ \t\]+breakpoint\[(\]\[)\];.*17\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } | |
339 | -re ".*$gdb_prompt $" { fail "list 8-17" ; gdb_suppress_tests } | |
340 | timeout { fail "list 8-17 (timeout)" ; gdb_suppress_tests } | |
341 | } | |
342 | ||
343 | send_gdb "list -\n" | |
344 | gdb_expect { | |
345 | -re "1\[ \t\]+#include .*7\[ \t\]+set_debug_traps\[(\]\[)\]+;\r\n$gdb_prompt $" { incr testcnt } | |
346 | -re ".*$gdb_prompt $" { fail "list 1-7" ; gdb_suppress_tests } | |
347 | timeout { fail "list 1-7 (timeout)" ; gdb_suppress_tests } | |
348 | } | |
349 | ||
350 | pass "$testcnt successive \"list -\" commands to page backwards" | |
351 | gdb_stop_suppressing_tests; | |
352 | } | |
353 | ||
354 | # | |
355 | # Test "list first,last" | |
356 | # | |
357 | ||
358 | proc test_list_range {} { | |
359 | global gdb_prompt | |
360 | ||
085dd6e6 | 361 | gdb_test "list list0.c:2,list0.c:5" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+.*5\[ \t\]+int x;" "list range; filename:line1,filename:line2" |
c906108c | 362 | |
085dd6e6 | 363 | gdb_test "list 2,5" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+.*5\[ \t\]+int x;" "list range; line1,line2" |
c906108c SS |
364 | |
365 | # gdb_test "list -1,6" "Line number 0 out of range; .*list0.c has 39 lines." "list range; lower bound negative" | |
366 | ||
367 | # gdb_test "list -100,-40" "Line number -60 out of range; .*list0.c has 39 lines." "list range; both bounds negative" | |
368 | ||
085dd6e6 | 369 | gdb_test "list 30,45" "30\[ \t\]+foo \(.*\);.*43\[ \t\]+\}" "list range; upper bound past EOF" |
c906108c | 370 | |
085dd6e6 | 371 | gdb_test "list 45,100" "Line number 45 out of range; .*list0.c has 43 lines." "list range; both bounds past EOF" |
c906108c SS |
372 | |
373 | gdb_test "list list0.c:2,list1.c:17" "Specified start and end are in different files." "list range, must be same files" | |
374 | } | |
375 | ||
376 | # | |
377 | # Test "list filename:function" | |
378 | # | |
379 | ||
380 | proc test_list_filename_and_function {} { | |
381 | global gdb_prompt | |
382 | ||
383 | set testcnt 0 | |
384 | ||
385 | # gcc appears to generate incorrect debugging information for code | |
386 | # in include files, which breaks this test. | |
387 | # SunPRO cc is the second case below, it's also correct. | |
c906108c SS |
388 | send_gdb "list list0.c:main\n" |
389 | gdb_expect { | |
d4f3574e | 390 | -re "1\[ \t\]+#include .*10\[ \t\]+x = 0;\r\n$gdb_prompt $" { |
c906108c SS |
391 | incr testcnt |
392 | } | |
393 | -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { | |
394 | pass "list function in source file 1" | |
395 | } | |
396 | -re ".*$gdb_prompt $" { fail "list list0.c:main" } | |
397 | timeout { fail "list list0.c:main (timeout)" } | |
398 | } | |
399 | ||
c906108c SS |
400 | # Not sure what the point of having this function be unused is. |
401 | # AIX is legitimately removing it. | |
402 | setup_xfail "rs6000-*-aix*" | |
403 | send_gdb "list list0.c:unused\n" | |
404 | gdb_expect { | |
085dd6e6 | 405 | -re "40\[ \t\]+unused.*43\[ \t\]+\}\r\n$gdb_prompt $" { |
c906108c SS |
406 | incr testcnt |
407 | } | |
408 | -re "37.*42\[ \t\]+\}\r\n$gdb_prompt $" { | |
409 | incr testcnt | |
410 | } | |
411 | -re ".*$gdb_prompt $" { fail "list list0.c:unused" } | |
412 | timeout { fail "list list0.c:unused (timeout)" } | |
413 | } | |
414 | clear_xfail "rs6000-*-aix*" | |
415 | ||
416 | # gcc appears to generate incorrect debugging information for code | |
417 | # in include files, which breaks this test. | |
418 | # Ultrix gdb is the second case, one line different but still correct. | |
419 | # SunPRO cc is the third case. | |
420 | setup_xfail "rs6000-*-*" 1804 | |
c906108c SS |
421 | setup_xfail_format "COFF" |
422 | send_gdb "list list0.h:foo\n" | |
423 | gdb_expect { | |
424 | -re "2\[ \t\]+including file. This.*11\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { | |
425 | incr testcnt | |
426 | } | |
427 | -re "1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { | |
428 | incr testcnt | |
429 | } | |
430 | -re "3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { | |
431 | incr testcnt | |
432 | } | |
433 | -re "No source file named list0.h.\r\n$gdb_prompt $" { | |
434 | fail "list list0.h:foo" | |
435 | } | |
436 | -re ".*$gdb_prompt $" { fail "list list0.h:foo" } | |
437 | timeout { fail "list list0.h:foo (timeout)" } | |
438 | } | |
439 | ||
440 | # Ultrix gdb is the second case. | |
c906108c SS |
441 | send_gdb "list list1.c:bar\n" |
442 | gdb_expect { | |
085dd6e6 | 443 | -re "4\[ \t\]+void.*13\[ \t\]+\}\r\n$gdb_prompt $" { |
c906108c SS |
444 | incr testcnt |
445 | } | |
085dd6e6 | 446 | -re "4\[ \t\]+void.*12\[ \t\]*long_line ..;\r\n$gdb_prompt $" { |
c906108c SS |
447 | incr testcnt |
448 | } | |
085dd6e6 | 449 | -re "4\[ \t\]+void.*11\[ \t\]*\r\n$gdb_prompt $" { |
c906108c SS |
450 | incr testcnt |
451 | } | |
452 | -re ".*$gdb_prompt $" { fail "list list1.c:bar" } | |
453 | timeout { fail "list list1.c:bar (timeout)" } | |
454 | } | |
455 | ||
c906108c SS |
456 | # Not sure what the point of having this function be unused is. |
457 | # AIX is legitimately removing it. | |
458 | setup_xfail "rs6000-*-aix*" | |
459 | send_gdb "list list1.c:unused\n" | |
460 | gdb_expect { | |
085dd6e6 | 461 | -re "12\[ \t\]+long_line \[(\]\[)\];.*13\[ \t\]+\}\r\n.*$gdb_prompt $" { |
c906108c SS |
462 | incr testcnt |
463 | } | |
085dd6e6 | 464 | -re "14.*19\[ \t\]+\}\r\n.*$gdb_prompt $" { |
c906108c SS |
465 | incr testcnt |
466 | } | |
467 | -re ".*$gdb_prompt $" { fail "list list1.c:unused" } | |
468 | timeout { fail "list list1.c:unused (timeout)" } | |
469 | } | |
470 | clear_xfail "rs6000-*-aix*" | |
471 | ||
472 | pass "list filename:function ($testcnt tests)" | |
473 | ||
791dfb64 DJ |
474 | # Test with quoting. |
475 | gdb_test "list 'list0.c:main'" "int main.*" | |
476 | ||
c906108c SS |
477 | # Test some invalid specs |
478 | # The following test takes the FIXME result on most systems using | |
479 | # DWARF. It fails to notice that main() is not in the file requested. | |
480 | ||
481 | setup_xfail "*-*-*" | |
482 | ||
483 | # Does this actually work ANYWHERE? I believe not, as this is an `aspect' of | |
484 | # lookup_symbol(), where, when it is given a specific symtab which does not | |
485 | # contain the requested symbol, it will subsequently search all of the symtabs | |
486 | # for the requested symbol. | |
487 | ||
488 | gdb_test "list list0.c:foo" "Function \"foo\" not defined in .*list0.c" "list filename:function; wrong filename rejected" | |
489 | ||
085dd6e6 | 490 | gdb_test "list foobar.c:main" "No source file named foobar.c.|Location not found" "list filename:function; nonexistant file" |
c906108c | 491 | |
085dd6e6 | 492 | gdb_test "list list0.h:foobar" "Function \"foobar\" not defined.|Location not found" "list filename:function; nonexistant function" |
c906108c SS |
493 | |
494 | } | |
495 | ||
496 | proc test_forward_search {} { | |
497 | global timeout | |
498 | ||
27d3a1a2 | 499 | gdb_test_no_output "set listsize 4" |
c906108c SS |
500 | # On SunOS4, this gives us lines 19-22. On AIX, it gives us |
501 | # lines 20-23. This depends on whether the line number of a function | |
502 | # is considered to be the openbrace or the first statement--either one | |
503 | # is acceptable. | |
085dd6e6 | 504 | gdb_test "list long_line" "24\[ \t\]+long_line .*" |
c906108c SS |
505 | |
506 | gdb_test "search 4321" " not found" | |
507 | ||
085dd6e6 | 508 | gdb_test "search 6789" "28\[ \t\]+oof .6789.;" |
c906108c SS |
509 | |
510 | # Test that GDB won't crash if the line being searched is extremely long. | |
511 | ||
512 | set oldtimeout $timeout | |
513 | set timeout [expr "$timeout + 300"] | |
514 | verbose "Timeout is now $timeout seconds" 2 | |
515 | gdb_test "search 1234" ".*1234.*" "search extremely long line (> 5000 chars)" | |
516 | set timeout $oldtimeout | |
517 | verbose "Timeout is now $timeout seconds" 2 | |
518 | } | |
519 | ||
520 | # Start with a fresh gdb. | |
521 | ||
522 | gdb_exit | |
523 | gdb_start | |
524 | gdb_reinitialize_dir $srcdir/$subdir | |
525 | gdb_load ${binfile} | |
526 | ||
527 | if [target_info exists gdb_stub] { | |
528 | gdb_step_for_stub; | |
529 | } | |
530 | ||
27d3a1a2 | 531 | gdb_test_no_output "set width 0" |
c906108c SS |
532 | |
533 | test_listsize | |
534 | get_debug_format | |
535 | if [ set_listsize 10 ] then { | |
536 | test_list_include_file | |
537 | test_list_filename_and_number | |
538 | test_list_function | |
539 | test_list_forward | |
540 | test_list_backwards | |
a0b3c4fd | 541 | test_repeat_list_command |
c906108c SS |
542 | test_list_range |
543 | test_list_filename_and_function | |
544 | test_forward_search | |
545 | } | |
085dd6e6 JM |
546 | |
547 | remote_exec build "rm -f list0.h" |