[people/ms/u-boot.git] / include / configs / axs10x.h

/*
 * Copyright (C) 2013-2016 Synopsys, Inc. All rights reserved.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_AXS10X_H_
#define _CONFIG_AXS10X_H_

#include <linux/sizes.h>
/*
 *  CPU configuration
 */
#define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ

#define ARC_FPGA_PERIPHERAL_BASE	0xE0000000
#define ARC_APB_PERIPHERAL_BASE		0xF0000000
#define ARC_DWMMC_BASE			(ARC_FPGA_PERIPHERAL_BASE + 0x15000)
#define ARC_DWGMAC_BASE			(ARC_FPGA_PERIPHERAL_BASE + 0x18000)

/*
 * Memory configuration
 */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE

#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE		SZ_512M

#define CONFIG_SYS_INIT_SP_ADDR		\
	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)

#define CONFIG_SYS_MALLOC_LEN		SZ_2M
#define CONFIG_SYS_BOOTM_LEN		SZ_32M
#define CONFIG_SYS_LOAD_ADDR		0x82000000

/*
 * This board might be of different versions so handle it
 */
#define CONFIG_BOARD_TYPES
#define CONFIG_BOARD_EARLY_INIT_F

/*
 * NAND Flash configuration
 */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_NAND_BASE		(ARC_FPGA_PERIPHERAL_BASE + 0x16000)
#define CONFIG_SYS_MAX_NAND_DEVICE	1

/*
 * UART configuration
 */
#define CONFIG_DW_SERIAL
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_CLK		33333333
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_BAUDRATE			115200

/*
 * I2C configuration
 */
#define CONFIG_SYS_I2C
#define CONFIG_I2C_ENV_EEPROM_BUS	2
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SPEED1		100000
#define CONFIG_SYS_I2C_SPEED2		100000
#define CONFIG_SYS_I2C_SLAVE		0
#define CONFIG_SYS_I2C_SLAVE1		0
#define CONFIG_SYS_I2C_SLAVE2		0
#define CONFIG_SYS_I2C_BASE		0xE001D000
#define CONFIG_SYS_I2C_BASE1		0xE001E000
#define CONFIG_SYS_I2C_BASE2		0xE001F000
#define CONFIG_SYS_I2C_BUS_MAX		3
#define IC_CLK				50

/*
 * EEPROM configuration
 */
#define CONFIG_SYS_I2C_EEPROM_ADDR		(0xA8 >> 1)
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	64

/*
 * SD/MMC configuration
 */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_DWMMC
#define CONFIG_DOS_PARTITION

/*
 * Ethernet PHY configuration
 */
#define CONFIG_MII
#define CONFIG_PHY_GIGE

/*
 * USB 1.1 configuration
 */
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1

/*
 * Commands still not supported in Kconfig
 */
#define CONFIG_CMD_NAND

#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS		16

/*
 * Environment settings
 */
#define CONFIG_ENV_IS_IN_EEPROM
#define CONFIG_ENV_SIZE			SZ_512
#define CONFIG_ENV_OFFSET		0

/*
 * Environment configuration
 */
#define CONFIG_BOOTFILE			"uImage"
#define CONFIG_BOOTARGS			"console=ttyS3,115200n8"
#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR

/*
 * Console configuration
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE		SZ_256
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
						sizeof(CONFIG_SYS_PROMPT) + 16)

/*
 * Misc utility configuration
 */
#define CONFIG_BOUNCE_BUFFER

#endif /* _CONFIG_AXS10X_H_ */
Commit	Line	Data
a7069ddf	1	/*
65fcba12	2	* Copyright (C) 2013-2016 Synopsys, Inc. All rights reserved.
a7069ddf AB	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
65fcba12 AB	7	#ifndef _CONFIG_AXS10X_H_
65fcba12 AB	8	#define _CONFIG_AXS10X_H_
a7069ddf	9
65fcba12	10	#include <linux/sizes.h>
a7069ddf AB	11	/*
	12	* CPU configuration
	13	*/
a7069ddf AB	14	#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
a7069ddf AB	15
a7069ddf AB	16	#define ARC_FPGA_PERIPHERAL_BASE 0xE0000000
	17	#define ARC_APB_PERIPHERAL_BASE 0xF0000000
	18	#define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000)
	19	#define ARC_DWGMAC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x18000)
	20
	21	/*
	22	* Memory configuration
	23	*/
a7069ddf AB	24	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	25
	26	#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
	27	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
65fcba12	28	#define CONFIG_SYS_SDRAM_SIZE SZ_512M
a7069ddf AB	29
	30	#define CONFIG_SYS_INIT_SP_ADDR \
	31	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
	32
65fcba12 AB	33	#define CONFIG_SYS_MALLOC_LEN SZ_2M
65fcba12 AB	34	#define CONFIG_SYS_BOOTM_LEN SZ_32M
a7069ddf AB	35	#define CONFIG_SYS_LOAD_ADDR 0x82000000
a7069ddf AB	36
0241c313 AB	37	/*
	38	* This board might be of different versions so handle it
	39	*/
	40	#define CONFIG_BOARD_TYPES
	41	#define CONFIG_BOARD_EARLY_INIT_F
	42
a7069ddf AB	43	/*
	44	* NAND Flash configuration
	45	*/
	46	#define CONFIG_SYS_NO_FLASH
	47	#define CONFIG_SYS_NAND_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x16000)
	48	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	49
	50	/*
	51	* UART configuration
a7069ddf	52	*/
fb2dea60	53	#define CONFIG_DW_SERIAL
a7069ddf	54	#define CONFIG_SYS_NS16550_SERIAL
fb2dea60	55	#define CONFIG_SYS_NS16550_CLK 33333333
a7069ddf	56	#define CONFIG_SYS_NS16550_MEM32
a7069ddf	57	#define CONFIG_BAUDRATE 115200
fb2dea60	58
a7069ddf AB	59	/*
	60	* I2C configuration
	61	*/
678398b1	62	#define CONFIG_SYS_I2C
a7069ddf AB	63	#define CONFIG_I2C_ENV_EEPROM_BUS 2
a7069ddf AB	64	#define CONFIG_SYS_I2C_SPEED 100000
678398b1 SR	65	#define CONFIG_SYS_I2C_SPEED1 100000
678398b1 SR	66	#define CONFIG_SYS_I2C_SPEED2 100000
a7069ddf	67	#define CONFIG_SYS_I2C_SLAVE 0
678398b1 SR	68	#define CONFIG_SYS_I2C_SLAVE1 0
678398b1 SR	69	#define CONFIG_SYS_I2C_SLAVE2 0
a7069ddf AB	70	#define CONFIG_SYS_I2C_BASE 0xE001D000
	71	#define CONFIG_SYS_I2C_BASE1 0xE001E000
	72	#define CONFIG_SYS_I2C_BASE2 0xE001F000
	73	#define CONFIG_SYS_I2C_BUS_MAX 3
	74	#define IC_CLK 50
	75
	76	/*
	77	* EEPROM configuration
	78	*/
a7069ddf AB	79	#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1)
	80	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	81	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
	82	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
6bfa4420	83	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 64
a7069ddf AB	84
	85	/*
	86	* SD/MMC configuration
	87	*/
	88	#define CONFIG_MMC
	89	#define CONFIG_GENERIC_MMC
	90	#define CONFIG_DWMMC
	91	#define CONFIG_DOS_PARTITION
	92
	93	/*
	94	* Ethernet PHY configuration
	95	*/
a7069ddf AB	96	#define CONFIG_MII
	97	#define CONFIG_PHY_GIGE
	98
d0602bd4 AB	99	/*
	100	* USB 1.1 configuration
	101	*/
	102	#define CONFIG_USB_OHCI_NEW
	103	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
	104
a7069ddf	105	/*
fb2dea60	106	* Commands still not supported in Kconfig
a7069ddf	107	*/
a7069ddf	108	#define CONFIG_CMD_NAND
a7069ddf AB	109
	110	#define CONFIG_AUTO_COMPLETE
	111	#define CONFIG_SYS_MAXARGS 16
	112
	113	/*
	114	* Environment settings
	115	*/
	116	#define CONFIG_ENV_IS_IN_EEPROM
65fcba12	117	#define CONFIG_ENV_SIZE SZ_512
a7069ddf AB	118	#define CONFIG_ENV_OFFSET 0
	119
	120	/*
	121	* Environment configuration
	122	*/
a7069ddf AB	123	#define CONFIG_BOOTFILE "uImage"
	124	#define CONFIG_BOOTARGS "console=ttyS3,115200n8"
	125	#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
	126
	127	/*
	128	* Console configuration
	129	*/
	130	#define CONFIG_SYS_LONGHELP
65fcba12	131	#define CONFIG_SYS_CBSIZE SZ_256
a7069ddf AB	132	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	133	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	134	sizeof(CONFIG_SYS_PROMPT) + 16)
	135
	136	/*
	137	* Misc utility configuration
	138	*/
	139	#define CONFIG_BOUNCE_BUFFER
	140
65fcba12	141	#endif /* _CONFIG_AXS10X_H_ */