]>
Commit | Line | Data |
---|---|---|
52826846 | 1 | .\" -*- nroff -*- |
e43d0cda NB |
2 | .\" Copyright Neil Brown and others. |
3 | .\" This program is free software; you can redistribute it and/or modify | |
4 | .\" it under the terms of the GNU General Public License as published by | |
5 | .\" the Free Software Foundation; either version 2 of the License, or | |
6 | .\" (at your option) any later version. | |
7 | .\" See file COPYING in distribution for details. | |
25cfca31 | 8 | .TH MDADM 8 "" v4.0 |
52826846 | 9 | .SH NAME |
9a9dab36 | 10 | mdadm \- manage MD devices |
cd29a5c8 | 11 | .I aka |
93e790af | 12 | Linux Software RAID |
cd29a5c8 | 13 | |
52826846 NB |
14 | .SH SYNOPSIS |
15 | ||
e0d19036 | 16 | .BI mdadm " [mode] <raiddevice> [options] <component-devices>" |
52826846 | 17 | |
2ae555c3 | 18 | .SH DESCRIPTION |
52826846 | 19 | RAID devices are virtual devices created from two or more |
e0fe762a | 20 | real block devices. This allows multiple devices (typically disk |
35cc5be4 | 21 | drives or partitions thereof) to be combined into a single device to |
cd29a5c8 | 22 | hold (for example) a single filesystem. |
2d465520 | 23 | Some RAID levels include redundancy and so can survive some degree of |
cd29a5c8 NB |
24 | device failure. |
25 | ||
2d465520 NB |
26 | Linux Software RAID devices are implemented through the md (Multiple |
27 | Devices) device driver. | |
cd29a5c8 NB |
28 | |
29 | Currently, Linux supports | |
30 | .B LINEAR | |
31 | md devices, | |
32 | .B RAID0 | |
33 | (striping), | |
34 | .B RAID1 | |
35 | (mirroring), | |
d013a55e NB |
36 | .BR RAID4 , |
37 | .BR RAID5 , | |
98c6faba | 38 | .BR RAID6 , |
1a7dfc35 | 39 | .BR RAID10 , |
b5e64645 | 40 | .BR MULTIPATH , |
90c8d668 | 41 | .BR FAULTY , |
cd29a5c8 | 42 | and |
90c8d668 | 43 | .BR CONTAINER . |
d013a55e | 44 | |
a9d69660 NB |
45 | .B MULTIPATH |
46 | is not a Software RAID mechanism, but does involve | |
93e790af | 47 | multiple devices: |
d013a55e | 48 | each device is a path to one common physical storage device. |
9652457e N |
49 | New installations should not use md/multipath as it is not well |
50 | supported and has no ongoing development. Use the Device Mapper based | |
51 | multipath-tools instead. | |
d013a55e | 52 | |
a9d69660 NB |
53 | .B FAULTY |
54 | is also not true RAID, and it only involves one device. It | |
b5e64645 | 55 | provides a layer over a true device that can be used to inject faults. |
52826846 | 56 | |
4cce4069 | 57 | .B CONTAINER |
8fd8d9c4 N |
58 | is different again. A |
59 | .B CONTAINER | |
60 | is a collection of devices that are | |
90c8d668 N |
61 | managed as a set. This is similar to the set of devices connected to |
62 | a hardware RAID controller. The set of devices may contain a number | |
9652457e | 63 | of different RAID arrays each utilising some (or all) of the blocks from a |
90c8d668 | 64 | number of the devices in the set. For example, two devices in a 5-device set |
9652457e | 65 | might form a RAID1 using the whole devices. The remaining three might |
90c8d668 N |
66 | have a RAID5 over the first half of each device, and a RAID0 over the |
67 | second half. | |
68 | ||
8fd8d9c4 N |
69 | With a |
70 | .BR CONTAINER , | |
71 | there is one set of metadata that describes all of | |
72 | the arrays in the container. So when | |
73 | .I mdadm | |
74 | creates a | |
75 | .B CONTAINER | |
9652457e N |
76 | device, the device just represents the metadata. Other normal arrays (RAID1 |
77 | etc) can be created inside the container. | |
52826846 NB |
78 | |
79 | .SH MODES | |
8382f19b | 80 | mdadm has several major modes of operation: |
cd29a5c8 NB |
81 | .TP |
82 | .B Assemble | |
93e790af | 83 | Assemble the components of a previously created |
e0fe762a | 84 | array into an active array. Components can be explicitly given |
2ae555c3 | 85 | or can be searched for. |
51ac42e3 | 86 | .I mdadm |
cd29a5c8 NB |
87 | checks that the components |
88 | do form a bona fide array, and can, on request, fiddle superblock | |
89 | information so as to assemble a faulty array. | |
90 | ||
91 | .TP | |
92 | .B Build | |
e0fe762a | 93 | Build an array that doesn't have per-device metadata (superblocks). For these |
a9d69660 NB |
94 | sorts of arrays, |
95 | .I mdadm | |
96 | cannot differentiate between initial creation and subsequent assembly | |
97 | of an array. It also cannot perform any checks that appropriate | |
93e790af | 98 | components have been requested. Because of this, the |
a9d69660 NB |
99 | .B Build |
100 | mode should only be used together with a complete understanding of | |
101 | what you are doing. | |
cd29a5c8 NB |
102 | |
103 | .TP | |
104 | .B Create | |
e0fe762a N |
105 | Create a new array with per-device metadata (superblocks). |
106 | Appropriate metadata is written to each device, and then the array | |
107 | comprising those devices is activated. A 'resync' process is started | |
108 | to make sure that the array is consistent (e.g. both sides of a mirror | |
109 | contain the same data) but the content of the device is left otherwise | |
110 | untouched. | |
111 | The array can be used as soon as it has been created. There is no | |
112 | need to wait for the initial resync to finish. | |
cd29a5c8 | 113 | |
cd29a5c8 NB |
114 | .TP |
115 | .B "Follow or Monitor" | |
5787fa49 | 116 | Monitor one or more md devices and act on any state changes. This is |
e0fe762a N |
117 | only meaningful for RAID1, 4, 5, 6, 10 or multipath arrays, as |
118 | only these have interesting state. RAID0 or Linear never have | |
98c6faba | 119 | missing, spare, or failed drives, so there is nothing to monitor. |
5787fa49 | 120 | |
dd0781e5 NB |
121 | .TP |
122 | .B "Grow" | |
123 | Grow (or shrink) an array, or otherwise reshape it in some way. | |
124 | Currently supported growth options including changing the active size | |
c64881d7 N |
125 | of component devices and changing the number of active devices in |
126 | Linear and RAID levels 0/1/4/5/6, | |
127 | changing the RAID level between 0, 1, 5, and 6, and between 0 and 10, | |
17790db6 | 128 | changing the chunk size and layout for RAID 0,4,5,6,10 as well as adding or |
860f11ed | 129 | removing a write-intent bitmap and changing the array's consistency policy. |
cd29a5c8 | 130 | |
8382f19b NB |
131 | .TP |
132 | .B "Incremental Assembly" | |
133 | Add a single device to an appropriate array. If the addition of the | |
134 | device makes the array runnable, the array will be started. | |
135 | This provides a convenient interface to a | |
136 | .I hot-plug | |
137 | system. As each device is detected, | |
138 | .I mdadm | |
139 | has a chance to include it in some array as appropriate. | |
29ba4804 N |
140 | Optionally, when the |
141 | .I \-\-fail | |
142 | flag is passed in we will remove the device from any active array | |
143 | instead of adding it. | |
9652457e | 144 | |
8fd8d9c4 N |
145 | If a |
146 | .B CONTAINER | |
147 | is passed to | |
148 | .I mdadm | |
149 | in this mode, then any arrays within that container will be assembled | |
150 | and started. | |
8382f19b | 151 | |
2ae555c3 NB |
152 | .TP |
153 | .B Manage | |
154 | This is for doing things to specific components of an array such as | |
155 | adding new spares and removing faulty devices. | |
156 | ||
157 | .TP | |
158 | .B Misc | |
159 | This is an 'everything else' mode that supports operations on active | |
160 | arrays, operations on component devices such as erasing old superblocks, and | |
161 | information gathering operations. | |
e43d0cda NB |
162 | .\"This mode allows operations on independent devices such as examine MD |
163 | .\"superblocks, erasing old superblocks and stopping active arrays. | |
2ae555c3 | 164 | |
1f48664b NB |
165 | .TP |
166 | .B Auto-detect | |
167 | This mode does not act on a specific device or array, but rather it | |
168 | requests the Linux Kernel to activate any auto-detected arrays. | |
52826846 NB |
169 | .SH OPTIONS |
170 | ||
2ae555c3 | 171 | .SH Options for selecting a mode are: |
52826846 | 172 | |
cd29a5c8 | 173 | .TP |
7e23fc43 | 174 | .BR \-A ", " \-\-assemble |
2d465520 | 175 | Assemble a pre-existing array. |
52826846 | 176 | |
cd29a5c8 | 177 | .TP |
7e23fc43 | 178 | .BR \-B ", " \-\-build |
cd29a5c8 | 179 | Build a legacy array without superblocks. |
52826846 | 180 | |
cd29a5c8 | 181 | .TP |
7e23fc43 | 182 | .BR \-C ", " \-\-create |
cd29a5c8 | 183 | Create a new array. |
52826846 | 184 | |
cd29a5c8 | 185 | .TP |
7e23fc43 | 186 | .BR \-F ", " \-\-follow ", " \-\-monitor |
cd29a5c8 NB |
187 | Select |
188 | .B Monitor | |
189 | mode. | |
52826846 | 190 | |
dd0781e5 | 191 | .TP |
7e23fc43 | 192 | .BR \-G ", " \-\-grow |
dd0781e5 | 193 | Change the size or shape of an active array. |
8382f19b NB |
194 | |
195 | .TP | |
1f48664b | 196 | .BR \-I ", " \-\-incremental |
29ba4804 | 197 | Add/remove a single device to/from an appropriate array, and possibly start the array. |
8382f19b | 198 | |
1f48664b NB |
199 | .TP |
200 | .B \-\-auto-detect | |
201 | Request that the kernel starts any auto-detected arrays. This can only | |
202 | work if | |
203 | .I md | |
204 | is compiled into the kernel \(em not if it is a module. | |
205 | Arrays can be auto-detected by the kernel if all the components are in | |
206 | primary MS-DOS partitions with partition type | |
e0fe762a N |
207 | .BR FD , |
208 | and all use v0.90 metadata. | |
1f48664b NB |
209 | In-kernel autodetect is not recommended for new installations. Using |
210 | .I mdadm | |
211 | to detect and assemble arrays \(em possibly in an | |
212 | .I initrd | |
213 | \(em is substantially more flexible and should be preferred. | |
214 | ||
2ae555c3 NB |
215 | .P |
216 | If a device is given before any options, or if the first option is | |
4a984120 | 217 | one of |
7e23fc43 | 218 | .BR \-\-add , |
f33a71f1 N |
219 | .BR \-\-re\-add , |
220 | .BR \-\-add\-spare , | |
7e23fc43 | 221 | .BR \-\-fail , |
7e23fc43 | 222 | .BR \-\-remove , |
70c55e36 N |
223 | or |
224 | .BR \-\-replace , | |
e0fe762a | 225 | then the MANAGE mode is assumed. |
2ae555c3 NB |
226 | Anything other than these will cause the |
227 | .B Misc | |
228 | mode to be assumed. | |
dd0781e5 | 229 | |
2ae555c3 | 230 | .SH Options that are not mode-specific are: |
e793c2e5 | 231 | |
cd29a5c8 | 232 | .TP |
7e23fc43 | 233 | .BR \-h ", " \-\-help |
a9d69660 | 234 | Display general help message or, after one of the above options, a |
93e790af | 235 | mode-specific help message. |
56eedc1a NB |
236 | |
237 | .TP | |
7e23fc43 | 238 | .B \-\-help\-options |
56eedc1a NB |
239 | Display more detailed help about command line parsing and some commonly |
240 | used options. | |
52826846 | 241 | |
cd29a5c8 | 242 | .TP |
7e23fc43 | 243 | .BR \-V ", " \-\-version |
9a9dab36 | 244 | Print version information for mdadm. |
52826846 | 245 | |
cd29a5c8 | 246 | .TP |
7e23fc43 | 247 | .BR \-v ", " \-\-verbose |
22892d56 NB |
248 | Be more verbose about what is happening. This can be used twice to be |
249 | extra-verbose. | |
a9d69660 | 250 | The extra verbosity currently only affects |
7e23fc43 | 251 | .B \-\-detail \-\-scan |
22892d56 | 252 | and |
7e23fc43 | 253 | .BR "\-\-examine \-\-scan" . |
52826846 | 254 | |
dab6685f | 255 | .TP |
7e23fc43 | 256 | .BR \-q ", " \-\-quiet |
dab6685f | 257 | Avoid printing purely informative messages. With this, |
51ac42e3 | 258 | .I mdadm |
dab6685f NB |
259 | will be silent unless there is something really important to report. |
260 | ||
08ca2adf | 261 | |
e0d19036 | 262 | .TP |
7e23fc43 | 263 | .BR \-f ", " \-\-force |
93e790af | 264 | Be more forceful about certain operations. See the various modes for |
e0d19036 NB |
265 | the exact meaning of this option in different contexts. |
266 | ||
267 | .TP | |
7e23fc43 | 268 | .BR \-c ", " \-\-config= |
9dc70cbc N |
269 | Specify the config file or directory. Default is to use |
270 | .B /etc/mdadm.conf | |
271 | and | |
272 | .BR /etc/mdadm.conf.d , | |
273 | or if those are missing then | |
274 | .B /etc/mdadm/mdadm.conf | |
275 | and | |
276 | .BR /etc/mdadm/mdadm.conf.d . | |
5787fa49 | 277 | If the config file given is |
93e790af | 278 | .B "partitions" |
5787fa49 NB |
279 | then nothing will be read, but |
280 | .I mdadm | |
281 | will act as though the config file contained exactly | |
9dc70cbc N |
282 | .br |
283 | .B " DEVICE partitions containers" | |
284 | .br | |
5787fa49 NB |
285 | and will read |
286 | .B /proc/partitions | |
8fd8d9c4 N |
287 | to find a list of devices to scan, and |
288 | .B /proc/mdstat | |
289 | to find a list of containers to examine. | |
d013a55e | 290 | If the word |
93e790af | 291 | .B "none" |
d013a55e NB |
292 | is given for the config file, then |
293 | .I mdadm | |
294 | will act as though the config file were empty. | |
e0d19036 | 295 | |
9dc70cbc N |
296 | If the name given is of a directory, then |
297 | .I mdadm | |
298 | will collect all the files contained in the directory with a name ending | |
299 | in | |
300 | .BR .conf , | |
301 | sort them lexically, and process all of those files as config files. | |
302 | ||
e0d19036 | 303 | .TP |
7e23fc43 | 304 | .BR \-s ", " \-\-scan |
93e790af | 305 | Scan config file or |
e0d19036 NB |
306 | .B /proc/mdstat |
307 | for missing information. | |
308 | In general, this option gives | |
51ac42e3 | 309 | .I mdadm |
93e790af SW |
310 | permission to get any missing information (like component devices, |
311 | array devices, array identities, and alert destination) from the | |
312 | configuration file (see previous option); | |
313 | one exception is MISC mode when using | |
7e23fc43 | 314 | .B \-\-detail |
e0d19036 | 315 | or |
93e790af | 316 | .B \-\-stop, |
e0d19036 | 317 | in which case |
7e23fc43 | 318 | .B \-\-scan |
e0d19036 NB |
319 | says to get a list of array devices from |
320 | .BR /proc/mdstat . | |
321 | ||
570c0542 | 322 | .TP |
d16c7af6 | 323 | .BR \-e ", " \-\-metadata= |
e0fe762a | 324 | Declare the style of RAID metadata (superblock) to be used. The |
26f467a9 | 325 | default is {DEFAULT_METADATA} for |
7e23fc43 | 326 | .BR \-\-create , |
53e8b987 | 327 | and to guess for other operations. |
2790ffe3 GB |
328 | The default can be overridden by setting the |
329 | .B metadata | |
330 | value for the | |
331 | .B CREATE | |
332 | keyword in | |
333 | .BR mdadm.conf . | |
570c0542 NB |
334 | |
335 | Options are: | |
336 | .RS | |
26f467a9 | 337 | .ie '{DEFAULT_METADATA}'0.90' |
338 | .IP "0, 0.90, default" | |
339 | .el | |
7d5c3964 | 340 | .IP "0, 0.90" |
570c0542 | 341 | Use the original 0.90 format superblock. This format limits arrays to |
93e790af | 342 | 28 component devices and limits component devices of levels 1 and |
cd19c0cf JR |
343 | greater to 2 terabytes. It is also possible for there to be confusion |
344 | about whether the superblock applies to a whole device or just the | |
345 | last partition, if that partition starts on a 64K boundary. | |
26f467a9 | 346 | .ie '{DEFAULT_METADATA}'0.90' |
347 | .IP "1, 1.0, 1.1, 1.2" | |
348 | .el | |
7d5c3964 | 349 | .IP "1, 1.0, 1.1, 1.2 default" |
cd19c0cf JR |
350 | Use the new version-1 format superblock. This has fewer restrictions. |
351 | It can easily be moved between hosts with different endian-ness, and a | |
352 | recovery operation can be checkpointed and restarted. The different | |
353 | sub-versions store the superblock at different locations on the | |
354 | device, either at the end (for 1.0), at the start (for 1.1) or 4K from | |
7050aa3f N |
355 | the start (for 1.2). "1" is equivalent to "1.2" (the commonly |
356 | preferred 1.x format). | |
26f467a9 | 357 | 'if '{DEFAULT_METADATA}'1.2' "default" is equivalent to "1.2". |
8fd8d9c4 | 358 | .IP ddf |
e0fe762a N |
359 | Use the "Industry Standard" DDF (Disk Data Format) format defined by |
360 | SNIA. | |
361 | When creating a DDF array a | |
8fd8d9c4 N |
362 | .B CONTAINER |
363 | will be created, and normal arrays can be created in that container. | |
364 | .IP imsm | |
4cce4069 | 365 | Use the Intel(R) Matrix Storage Manager metadata format. This creates a |
8fd8d9c4 | 366 | .B CONTAINER |
4cce4069 DW |
367 | which is managed in a similar manner to DDF, and is supported by an |
368 | option-rom on some platforms: | |
369 | .IP | |
370 | .B http://www.intel.com/design/chipsets/matrixstorage_sb.htm | |
371 | .PP | |
570c0542 NB |
372 | .RE |
373 | ||
41a3b72a | 374 | .TP |
7e23fc43 | 375 | .B \-\-homehost= |
35cc5be4 | 376 | This will override any |
41a3b72a | 377 | .B HOMEHOST |
93e790af | 378 | setting in the config file and provides the identity of the host which |
41a3b72a NB |
379 | should be considered the home for any arrays. |
380 | ||
381 | When creating an array, the | |
382 | .B homehost | |
e0fe762a | 383 | will be recorded in the metadata. For version-1 superblocks, it will |
93e790af | 384 | be prefixed to the array name. For version-0.90 superblocks, part of |
41a3b72a NB |
385 | the SHA1 hash of the hostname will be stored in the later half of the |
386 | UUID. | |
387 | ||
388 | When reporting information about an array, any array which is tagged | |
389 | for the given homehost will be reported as such. | |
390 | ||
391 | When using Auto-Assemble, only arrays tagged for the given homehost | |
0ac91628 | 392 | will be allowed to use 'local' names (i.e. not ending in '_' followed |
e0fe762a N |
393 | by a digit string). See below under |
394 | .BR "Auto Assembly" . | |
41a3b72a | 395 | |
49325eac N |
396 | The special name "\fBany\fP" can be used as a wild card. If an array |
397 | is created with | |
398 | .B --homehost=any | |
399 | then the name "\fBany\fP" will be stored in the array and it can be | |
400 | assembled in the same way on any host. If an array is assembled with | |
401 | this option, then the homehost recorded on the array will be ignored. | |
402 | ||
c2ecf5f6 N |
403 | .TP |
404 | .B \-\-prefer= | |
405 | When | |
406 | .I mdadm | |
407 | needs to print the name for a device it normally finds the name in | |
408 | .B /dev | |
409 | which refers to the device and is shortest. When a path component is | |
410 | given with | |
411 | .B \-\-prefer | |
412 | .I mdadm | |
413 | will prefer a longer name if it contains that component. For example | |
414 | .B \-\-prefer=by-uuid | |
415 | will prefer a name in a subdirectory of | |
416 | .B /dev | |
417 | called | |
418 | .BR by-uuid . | |
419 | ||
420 | This functionality is currently only provided by | |
421 | .B \-\-detail | |
422 | and | |
423 | .BR \-\-monitor . | |
424 | ||
7716570e GJ |
425 | .TP |
426 | .B \-\-home\-cluster= | |
427 | specifies the cluster name for the md device. The md device can be assembled | |
428 | only on the cluster which matches the name specified. If this option is not | |
429 | provided, mdadm tries to detect the cluster name automatically. | |
430 | ||
2ae555c3 NB |
431 | .SH For create, build, or grow: |
432 | ||
433 | .TP | |
7e23fc43 | 434 | .BR \-n ", " \-\-raid\-devices= |
2ae555c3 NB |
435 | Specify the number of active devices in the array. This, plus the |
436 | number of spare devices (see below) must equal the number of | |
437 | .I component-devices | |
438 | (including "\fBmissing\fP" devices) | |
439 | that are listed on the command line for | |
e0fe762a | 440 | .BR \-\-create . |
2ae555c3 NB |
441 | Setting a value of 1 is probably |
442 | a mistake and so requires that | |
7e23fc43 | 443 | .B \-\-force |
2ae555c3 | 444 | be specified first. A value of 1 will then be allowed for linear, |
e0fe762a | 445 | multipath, RAID0 and RAID1. It is never allowed for RAID4, RAID5 or RAID6. |
2ae555c3 NB |
446 | .br |
447 | This number can only be changed using | |
7e23fc43 | 448 | .B \-\-grow |
e0fe762a N |
449 | for RAID1, RAID4, RAID5 and RAID6 arrays, and only on kernels which provide |
450 | the necessary support. | |
2ae555c3 NB |
451 | |
452 | .TP | |
7e23fc43 | 453 | .BR \-x ", " \-\-spare\-devices= |
2ae555c3 NB |
454 | Specify the number of spare (eXtra) devices in the initial array. |
455 | Spares can also be added | |
456 | and removed later. The number of component devices listed | |
e0fe762a | 457 | on the command line must equal the number of RAID devices plus the |
2ae555c3 NB |
458 | number of spare devices. |
459 | ||
2ae555c3 | 460 | .TP |
7e23fc43 | 461 | .BR \-z ", " \-\-size= |
95b55f18 | 462 | Amount (in Kilobytes) of space to use from each drive in RAID levels 1/4/5/6. |
2ae555c3 NB |
463 | This must be a multiple of the chunk size, and must leave about 128Kb |
464 | of space at the end of the drive for the RAID superblock. | |
465 | If this is not specified | |
466 | (as it normally is not) the smallest drive (or partition) sets the | |
467 | size, though if there is a variance among the drives of greater than 1%, a warning is | |
468 | issued. | |
469 | ||
95b55f18 | 470 | A suffix of 'K', 'M' or 'G' can be given to indicate Kilobytes, Megabytes or |
36fad8ec N |
471 | Gigabytes respectively. |
472 | ||
9ab6e80a N |
473 | Sometimes a replacement drive can be a little smaller than the |
474 | original drives though this should be minimised by IDEMA standards. | |
475 | Such a replacement drive will be rejected by | |
476 | .IR md . | |
477 | To guard against this it can be useful to set the initial size | |
478 | slightly smaller than the smaller device with the aim that it will | |
479 | still be larger than any replacement. | |
480 | ||
2ae555c3 | 481 | This value can be set with |
7e23fc43 | 482 | .B \-\-grow |
9ab6e80a N |
483 | for RAID level 1/4/5/6 though |
484 | .B CONTAINER | |
485 | based arrays such as those with IMSM metadata may not be able to | |
486 | support this. | |
487 | If the array was created with a size smaller than the currently | |
488 | active drives, the extra space can be accessed using | |
7e23fc43 | 489 | .BR \-\-grow . |
2ae555c3 NB |
490 | The size can be given as |
491 | .B max | |
492 | which means to choose the largest size that fits on all current drives. | |
52826846 | 493 | |
c26d78fe N |
494 | Before reducing the size of the array (with |
495 | .BR "\-\-grow \-\-size=" ) | |
496 | you should make sure that space isn't needed. If the device holds a | |
497 | filesystem, you would need to resize the filesystem to use less space. | |
498 | ||
499 | After reducing the array size you should check that the data stored in | |
500 | the device is still available. If the device holds a filesystem, then | |
501 | an 'fsck' of the filesystem is a minimum requirement. If there are | |
502 | problems the array can be made bigger again with no loss with another | |
503 | .B "\-\-grow \-\-size=" | |
504 | command. | |
505 | ||
9ab6e80a | 506 | This value cannot be used when creating a |
8fd8d9c4 | 507 | .B CONTAINER |
9ab6e80a N |
508 | such as with DDF and IMSM metadata, though it perfectly valid when |
509 | creating an array inside a container. | |
8fd8d9c4 | 510 | |
f24e2d6c | 511 | .TP |
c26d78fe | 512 | .BR \-Z ", " \-\-array\-size= |
f24e2d6c N |
513 | This is only meaningful with |
514 | .B \-\-grow | |
36fad8ec | 515 | and its effect is not persistent: when the array is stopped and |
f24e2d6c N |
516 | restarted the default array size will be restored. |
517 | ||
518 | Setting the array-size causes the array to appear smaller to programs | |
519 | that access the data. This is particularly needed before reshaping an | |
520 | array so that it will be smaller. As the reshape is not reversible, | |
521 | but setting the size with | |
522 | .B \-\-array-size | |
523 | is, it is required that the array size is reduced as appropriate | |
524 | before the number of devices in the array is reduced. | |
525 | ||
c26d78fe N |
526 | Before reducing the size of the array you should make sure that space |
527 | isn't needed. If the device holds a filesystem, you would need to | |
528 | resize the filesystem to use less space. | |
529 | ||
530 | After reducing the array size you should check that the data stored in | |
531 | the device is still available. If the device holds a filesystem, then | |
532 | an 'fsck' of the filesystem is a minimum requirement. If there are | |
533 | problems the array can be made bigger again with no loss with another | |
534 | .B "\-\-grow \-\-array\-size=" | |
535 | command. | |
536 | ||
95b55f18 | 537 | A suffix of 'K', 'M' or 'G' can be given to indicate Kilobytes, Megabytes or |
36fad8ec N |
538 | Gigabytes respectively. |
539 | A value of | |
540 | .B max | |
541 | restores the apparent size of the array to be whatever the real | |
542 | amount of available space is. | |
543 | ||
e39c76b9 ZL |
544 | Clustered arrays do not support this parameter yet. |
545 | ||
cd29a5c8 | 546 | .TP |
7e23fc43 | 547 | .BR \-c ", " \-\-chunk= |
95b55f18 | 548 | Specify chunk size of kilobytes. The default when creating an |
5f175898 | 549 | array is 512KB. To ensure compatibility with earlier versions, the |
422da715 | 550 | default when building an array with no persistent metadata is 64KB. |
e0fe762a | 551 | This is only meaningful for RAID0, RAID4, RAID5, RAID6, and RAID10. |
52826846 | 552 | |
a252c078 N |
553 | RAID4, RAID5, RAID6, and RAID10 require the chunk size to be a power |
554 | of 2. In any case it must be a multiple of 4KB. | |
555 | ||
95b55f18 | 556 | A suffix of 'K', 'M' or 'G' can be given to indicate Kilobytes, Megabytes or |
36fad8ec N |
557 | Gigabytes respectively. |
558 | ||
cd29a5c8 | 559 | .TP |
7e23fc43 | 560 | .BR \-\-rounding= |
e0fe762a N |
561 | Specify rounding factor for a Linear array. The size of each |
562 | component will be rounded down to a multiple of this size. | |
563 | This is a synonym for | |
564 | .B \-\-chunk | |
565 | but highlights the different meaning for Linear as compared to other | |
5f175898 N |
566 | RAID levels. The default is 64K if a kernel earlier than 2.6.16 is in |
567 | use, and is 0K (i.e. no rounding) in later kernels. | |
52826846 | 568 | |
cd29a5c8 | 569 | .TP |
7e23fc43 | 570 | .BR \-l ", " \-\-level= |
e0fe762a | 571 | Set RAID level. When used with |
7e23fc43 | 572 | .BR \-\-create , |
98c6faba | 573 | options are: linear, raid0, 0, stripe, raid1, 1, mirror, raid4, 4, |
8fd8d9c4 N |
574 | raid5, 5, raid6, 6, raid10, 10, multipath, mp, faulty, container. |
575 | Obviously some of these are synonymous. | |
576 | ||
577 | When a | |
578 | .B CONTAINER | |
579 | metadata type is requested, only the | |
580 | .B container | |
581 | level is permitted, and it does not need to be explicitly given. | |
aa88f531 NB |
582 | |
583 | When used with | |
7e23fc43 | 584 | .BR \-\-build , |
a9d69660 | 585 | only linear, stripe, raid0, 0, raid1, multipath, mp, and faulty are valid. |
52826846 | 586 | |
fd547b50 N |
587 | Can be used with |
588 | .B \-\-grow | |
589 | to change the RAID level in some cases. See LEVEL CHANGES below. | |
2ae555c3 | 590 | |
cd29a5c8 | 591 | .TP |
7e23fc43 | 592 | .BR \-p ", " \-\-layout= |
f24e2d6c N |
593 | This option configures the fine details of data layout for RAID5, RAID6, |
594 | and RAID10 arrays, and controls the failure modes for | |
1a7dfc35 NB |
595 | .IR faulty . |
596 | ||
e0fe762a | 597 | The layout of the RAID5 parity block can be one of |
7e23fc43 PS |
598 | .BR left\-asymmetric , |
599 | .BR left\-symmetric , | |
600 | .BR right\-asymmetric , | |
601 | .BR right\-symmetric , | |
53e8b987 PS |
602 | .BR la ", " ra ", " ls ", " rs . |
603 | The default is | |
7e23fc43 | 604 | .BR left\-symmetric . |
52826846 | 605 | |
cd19c0cf | 606 | It is also possible to cause RAID5 to use a RAID4-like layout by |
e0fe762a N |
607 | choosing |
608 | .BR parity\-first , | |
609 | or | |
610 | .BR parity\-last . | |
611 | ||
612 | Finally for RAID5 there are DDF\-compatible layouts, | |
613 | .BR ddf\-zero\-restart , | |
614 | .BR ddf\-N\-restart , | |
615 | and | |
616 | .BR ddf\-N\-continue . | |
617 | ||
618 | These same layouts are available for RAID6. There are also 4 layouts | |
619 | that will provide an intermediate stage for converting between RAID5 | |
620 | and RAID6. These provide a layout which is identical to the | |
621 | corresponding RAID5 layout on the first N\-1 devices, and has the 'Q' | |
622 | syndrome (the second 'parity' block used by RAID6) on the last device. | |
623 | These layouts are: | |
624 | .BR left\-symmetric\-6 , | |
625 | .BR right\-symmetric\-6 , | |
626 | .BR left\-asymmetric\-6 , | |
627 | .BR right\-asymmetric\-6 , | |
628 | and | |
10adfe9a | 629 | .BR parity\-first\-6 . |
e0fe762a | 630 | |
93e790af SW |
631 | When setting the failure mode for level |
632 | .I faulty, | |
1a7dfc35 | 633 | the options are: |
7e23fc43 PS |
634 | .BR write\-transient ", " wt , |
635 | .BR read\-transient ", " rt , | |
636 | .BR write\-persistent ", " wp , | |
637 | .BR read\-persistent ", " rp , | |
638 | .BR write\-all , | |
639 | .BR read\-fixable ", " rf , | |
53e8b987 | 640 | .BR clear ", " flush ", " none . |
b5e64645 | 641 | |
93e790af | 642 | Each failure mode can be followed by a number, which is used as a period |
b5e64645 NB |
643 | between fault generation. Without a number, the fault is generated |
644 | once on the first relevant request. With a number, the fault will be | |
93e790af | 645 | generated after that many requests, and will continue to be generated |
b5e64645 NB |
646 | every time the period elapses. |
647 | ||
648 | Multiple failure modes can be current simultaneously by using the | |
7e23fc43 | 649 | .B \-\-grow |
53e8b987 | 650 | option to set subsequent failure modes. |
b5e64645 NB |
651 | |
652 | "clear" or "none" will remove any pending or periodic failure modes, | |
2ae555c3 | 653 | and "flush" will clear any persistent faults. |
b5e64645 | 654 | |
6f9a21a7 | 655 | Finally, the layout options for RAID10 are one of 'n', 'o' or 'f' followed |
93e790af | 656 | by a small number. The default is 'n2'. The supported options are: |
1a7dfc35 | 657 | |
93e790af | 658 | .I 'n' |
e0fe762a | 659 | signals 'near' copies. Multiple copies of one data block are at |
b578481c NB |
660 | similar offsets in different devices. |
661 | ||
93e790af | 662 | .I 'o' |
b578481c NB |
663 | signals 'offset' copies. Rather than the chunks being duplicated |
664 | within a stripe, whole stripes are duplicated but are rotated by one | |
665 | device so duplicate blocks are on different devices. Thus subsequent | |
666 | copies of a block are in the next drive, and are one chunk further | |
667 | down. | |
668 | ||
93e790af | 669 | .I 'f' |
1a7dfc35 | 670 | signals 'far' copies |
93e790af | 671 | (multiple copies have very different offsets). |
e0fe762a | 672 | See md(4) for more detail about 'near', 'offset', and 'far'. |
1a7dfc35 NB |
673 | |
674 | The number is the number of copies of each datablock. 2 is normal, 3 | |
675 | can be useful. This number can be at most equal to the number of | |
676 | devices in the array. It does not need to divide evenly into that | |
677 | number (e.g. it is perfectly legal to have an 'n2' layout for an array | |
678 | with an odd number of devices). | |
679 | ||
f24e2d6c N |
680 | When an array is converted between RAID5 and RAID6 an intermediate |
681 | RAID6 layout is used in which the second parity block (Q) is always on | |
682 | the last device. To convert a RAID5 to RAID6 and leave it in this new | |
683 | layout (which does not require re-striping) use | |
684 | .BR \-\-layout=preserve . | |
685 | This will try to avoid any restriping. | |
686 | ||
687 | The converse of this is | |
688 | .B \-\-layout=normalise | |
689 | which will change a non-standard RAID6 layout into a more standard | |
690 | arrangement. | |
691 | ||
cd29a5c8 | 692 | .TP |
7e23fc43 | 693 | .BR \-\-parity= |
53e8b987 | 694 | same as |
7e23fc43 | 695 | .B \-\-layout |
53e8b987 | 696 | (thus explaining the p of |
7e23fc43 | 697 | .BR \-p ). |
52826846 | 698 | |
e793c2e5 | 699 | .TP |
7e23fc43 | 700 | .BR \-b ", " \-\-bitmap= |
e793c2e5 | 701 | Specify a file to store a write-intent bitmap in. The file should not |
53e8b987 | 702 | exist unless |
7e23fc43 | 703 | .B \-\-force |
53e8b987 | 704 | is also given. The same file should be provided |
2ae555c3 | 705 | when assembling the array. If the word |
93e790af | 706 | .B "internal" |
2ae555c3 NB |
707 | is given, then the bitmap is stored with the metadata on the array, |
708 | and so is replicated on all devices. If the word | |
93e790af | 709 | .B "none" |
2ae555c3 | 710 | is given with |
7e23fc43 | 711 | .B \-\-grow |
95a05b37 GJ |
712 | mode, then any bitmap that is present is removed. If the word |
713 | .B "clustered" | |
714 | is given, the array is created for a clustered environment. One bitmap | |
715 | is created for each node as defined by the | |
716 | .B \-\-nodes | |
717 | parameter and are stored internally. | |
e793c2e5 | 718 | |
2ae555c3 NB |
719 | To help catch typing errors, the filename must contain at least one |
720 | slash ('/') if it is a real file (not 'internal' or 'none'). | |
721 | ||
722 | Note: external bitmaps are only known to work on ext2 and ext3. | |
723 | Storing bitmap files on other filesystems may result in serious problems. | |
e793c2e5 | 724 | |
748952f7 N |
725 | When creating an array on devices which are 100G or larger, |
726 | .I mdadm | |
727 | automatically adds an internal bitmap as it will usually be | |
728 | beneficial. This can be suppressed with | |
5308f117 AP |
729 | .B "\-\-bitmap=none" |
730 | or by selecting a different consistency policy with | |
731 | .BR \-\-consistency\-policy . | |
748952f7 | 732 | |
cd29a5c8 | 733 | .TP |
7e23fc43 | 734 | .BR \-\-bitmap\-chunk= |
e0fe762a | 735 | Set the chunksize of the bitmap. Each bit corresponds to that many |
1bfdbe01 NB |
736 | Kilobytes of storage. |
737 | When using a file based bitmap, the default is to use the smallest | |
93e790af | 738 | size that is at-least 4 and requires no more than 2^21 chunks. |
2ae555c3 NB |
739 | When using an |
740 | .B internal | |
b8ab2a50 N |
741 | bitmap, the chunksize defaults to 64Meg, or larger if necessary to |
742 | fit the bitmap into the available space. | |
5787fa49 | 743 | |
95b55f18 | 744 | A suffix of 'K', 'M' or 'G' can be given to indicate Kilobytes, Megabytes or |
36fad8ec N |
745 | Gigabytes respectively. |
746 | ||
cd29a5c8 | 747 | .TP |
7e23fc43 | 748 | .BR \-W ", " \-\-write\-mostly |
e0fe762a | 749 | subsequent devices listed in a |
7e23fc43 PS |
750 | .BR \-\-build , |
751 | .BR \-\-create , | |
2ae555c3 | 752 | or |
7e23fc43 | 753 | .B \-\-add |
71574efb | 754 | command will be flagged as 'write\-mostly'. This is valid for RAID1 |
2ae555c3 NB |
755 | only and means that the 'md' driver will avoid reading from these |
756 | devices if at all possible. This can be useful if mirroring over a | |
757 | slow link. | |
52826846 | 758 | |
2ae555c3 | 759 | .TP |
7e23fc43 | 760 | .BR \-\-write\-behind= |
2ae555c3 | 761 | Specify that write-behind mode should be enabled (valid for RAID1 |
e0fe762a N |
762 | only). If an argument is specified, it will set the maximum number |
763 | of outstanding writes allowed. The default value is 256. | |
2ae555c3 NB |
764 | A write-intent bitmap is required in order to use write-behind |
765 | mode, and write-behind is only attempted on drives marked as | |
766 | .IR write-mostly . | |
dd0781e5 | 767 | |
71574efb N |
768 | .TP |
769 | .BR \-\-failfast | |
770 | subsequent devices listed in a | |
771 | .B \-\-create | |
772 | or | |
773 | .B \-\-add | |
774 | command will be flagged as 'failfast'. This is valid for RAID1 and | |
775 | RAID10 only. IO requests to these devices will be encouraged to fail | |
776 | quickly rather than cause long delays due to error handling. Also no | |
777 | attempt is made to repair a read error on these devices. | |
778 | ||
779 | If an array becomes degraded so that the 'failfast' device is the only | |
780 | usable device, the 'failfast' flag will then be ignored and extended | |
781 | delays will be preferred to complete failure. | |
782 | ||
783 | The 'failfast' flag is appropriate for storage arrays which have a | |
784 | low probability of true failure, but which may sometimes | |
785 | cause unacceptable delays due to internal maintenance functions. | |
786 | ||
dd0781e5 | 787 | .TP |
7e23fc43 | 788 | .BR \-\-assume\-clean |
dd0781e5 NB |
789 | Tell |
790 | .I mdadm | |
47d79ef8 NB |
791 | that the array pre-existed and is known to be clean. It can be useful |
792 | when trying to recover from a major failure as you can be sure that no | |
793 | data will be affected unless you actually write to the array. It can | |
794 | also be used when creating a RAID1 or RAID10 if you want to avoid the | |
b3f1c093 | 795 | initial resync, however this practice \(em while normally safe \(em is not |
e0fe762a | 796 | recommended. Use this only if you really know what you are doing. |
6acad481 ME |
797 | .IP |
798 | When the devices that will be part of a new array were filled | |
799 | with zeros before creation the operator knows the array is | |
800 | actually clean. If that is the case, such as after running | |
801 | badblocks, this argument can be used to tell mdadm the | |
802 | facts the operator knows. | |
ce52f92f N |
803 | .IP |
804 | When an array is resized to a larger size with | |
805 | .B "\-\-grow \-\-size=" | |
806 | the new space is normally resynced in that same way that the whole | |
6cbf8fb8 | 807 | array is resynced at creation. From Linux version 3.0, |
ce52f92f N |
808 | .B \-\-assume\-clean |
809 | can be used with that command to avoid the automatic resync. | |
dd0781e5 | 810 | |
2ae555c3 | 811 | .TP |
7e23fc43 | 812 | .BR \-\-backup\-file= |
53e8b987 | 813 | This is needed when |
7e23fc43 | 814 | .B \-\-grow |
cd19c0cf JR |
815 | is used to increase the number of raid-devices in a RAID5 or RAID6 if |
816 | there are no spare devices available, or to shrink, change RAID level | |
817 | or layout. See the GROW MODE section below on RAID\-DEVICES CHANGES. | |
818 | The file must be stored on a separate device, not on the RAID array | |
819 | being reshaped. | |
2ae555c3 | 820 | |
40c9a66a N |
821 | .TP |
822 | .B \-\-data\-offset= | |
823 | Arrays with 1.x metadata can leave a gap between the start of the | |
824 | device and the start of array data. This gap can be used for various | |
825 | metadata. The start of data is known as the | |
826 | .IR data\-offset . | |
827 | Normally an appropriate data offset is computed automatically. | |
828 | However it can be useful to set it explicitly such as when re-creating | |
829 | an array which was originally created using a different version of | |
830 | .I mdadm | |
831 | which computed a different offset. | |
832 | ||
833 | Setting the offset explicitly over-rides the default. The value given | |
95b55f18 MH |
834 | is in Kilobytes unless a suffix of 'K', 'M' or 'G' is used to explicitly |
835 | indicate Kilobytes, Megabytes or Gigabytes respectively. | |
40c9a66a N |
836 | |
837 | Since Linux 3.4, | |
838 | .B \-\-data\-offset | |
839 | can also be used with | |
840 | .B --grow | |
841 | for some RAID levels (initially on RAID10). This allows the | |
72ca9bcf | 842 | data\-offset to be changed as part of the reshape process. When the |
40c9a66a N |
843 | data offset is changed, no backup file is required as the difference |
844 | in offsets is used to provide the same functionality. | |
845 | ||
846 | When the new offset is earlier than the old offset, the number of | |
847 | devices in the array cannot shrink. When it is after the old offset, | |
848 | the number of devices in the array cannot increase. | |
849 | ||
72ca9bcf N |
850 | When creating an array, |
851 | .B \-\-data\-offset | |
852 | can be specified as | |
853 | .BR variable . | |
854 | In the case each member device is expected to have a offset appended | |
855 | to the name, separated by a colon. This makes it possible to recreate | |
856 | exactly an array which has varying data offsets (as can happen when | |
857 | different versions of | |
858 | .I mdadm | |
859 | are used to add different devices). | |
860 | ||
f211a137 AK |
861 | .TP |
862 | .BR \-\-continue | |
863 | This option is complementary to the | |
864 | .B \-\-freeze-reshape | |
865 | option for assembly. It is needed when | |
866 | .B \-\-grow | |
867 | operation is interrupted and it is not restarted automatically due to | |
868 | .B \-\-freeze-reshape | |
869 | usage during array assembly. This option is used together with | |
870 | .BR \-G | |
871 | , ( | |
872 | .BR \-\-grow | |
873 | ) command and device for a pending reshape to be continued. | |
874 | All parameters required for reshape continuation will be read from array metadata. | |
875 | If initial | |
876 | .BR \-\-grow | |
877 | command had required | |
878 | .BR \-\-backup\-file= | |
879 | option to be set, continuation option will require to have exactly the same | |
880 | backup file given as well. | |
881 | .IP | |
882 | Any other parameter passed together with | |
883 | .BR \-\-continue | |
884 | option will be ignored. | |
885 | ||
947fd4dd | 886 | .TP |
7e23fc43 | 887 | .BR \-N ", " \-\-name= |
947fd4dd NB |
888 | Set a |
889 | .B name | |
890 | for the array. This is currently only effective when creating an | |
e0fe762a N |
891 | array with a version-1 superblock, or an array in a DDF container. |
892 | The name is a simple textual string that can be used to identify array | |
893 | components when assembling. If name is needed but not specified, it | |
894 | is taken from the basename of the device that is being created. | |
895 | e.g. when creating | |
896 | .I /dev/md/home | |
897 | the | |
898 | .B name | |
899 | will default to | |
900 | .IR home . | |
947fd4dd | 901 | |
dd0781e5 | 902 | .TP |
7e23fc43 | 903 | .BR \-R ", " \-\-run |
dd0781e5 NB |
904 | Insist that |
905 | .I mdadm | |
906 | run the array, even if some of the components | |
907 | appear to be active in another array or filesystem. Normally | |
908 | .I mdadm | |
909 | will ask for confirmation before including such components in an | |
910 | array. This option causes that question to be suppressed. | |
911 | ||
912 | .TP | |
7e23fc43 | 913 | .BR \-f ", " \-\-force |
dd0781e5 NB |
914 | Insist that |
915 | .I mdadm | |
916 | accept the geometry and layout specified without question. Normally | |
917 | .I mdadm | |
918 | will not allow creation of an array with only one device, and will try | |
e0fe762a | 919 | to create a RAID5 array with one missing drive (as this makes the |
dd0781e5 | 920 | initial resync work faster). With |
7e23fc43 | 921 | .BR \-\-force , |
dd0781e5 NB |
922 | .I mdadm |
923 | will not try to be so clever. | |
924 | ||
0ea8f5b1 N |
925 | .TP |
926 | .BR \-o ", " \-\-readonly | |
927 | Start the array | |
928 | .B read only | |
929 | rather than read-write as normal. No writes will be allowed to the | |
8a70632f ZL |
930 | array, and no resync, recovery, or reshape will be started. It works with |
931 | Create, Assemble, Manage and Misc mode. | |
0ea8f5b1 | 932 | |
dd0781e5 | 933 | .TP |
257c1dc2 N |
934 | .BR \-a ", " "\-\-auto{=yes,md,mdp,part,p}{NN}" |
935 | Instruct mdadm how to create the device file if needed, possibly allocating | |
48f7b27a | 936 | an unused minor number. "md" causes a non-partitionable array |
257c1dc2 N |
937 | to be used (though since Linux 2.6.28, these array devices are in fact |
938 | partitionable). "mdp", "part" or "p" causes a partitionable array (2.6 and | |
2ae555c3 | 939 | later) to be used. "yes" requires the named md device to have |
f9c25f1d | 940 | a 'standard' format, and the type and minor number will be determined |
257c1dc2 N |
941 | from this. With mdadm 3.0, device creation is normally left up to |
942 | .I udev | |
943 | so this option is unlikely to be needed. | |
944 | See DEVICE NAMES below. | |
48f7b27a | 945 | |
a9d69660 | 946 | The argument can also come immediately after |
7e23fc43 | 947 | "\-a". e.g. "\-ap". |
dd0781e5 | 948 | |
53e8b987 | 949 | If |
7e23fc43 | 950 | .B \-\-auto |
53e8b987 | 951 | is not given on the command line or in the config file, then |
75723446 | 952 | the default will be |
7e23fc43 | 953 | .BR \-\-auto=yes . |
75723446 | 954 | |
1337546d | 955 | If |
7e23fc43 | 956 | .B \-\-scan |
1337546d NB |
957 | is also given, then any |
958 | .I auto= | |
35cc5be4 | 959 | entries in the config file will override the |
7e23fc43 | 960 | .B \-\-auto |
1337546d NB |
961 | instruction given on the command line. |
962 | ||
dd0781e5 NB |
963 | For partitionable arrays, |
964 | .I mdadm | |
965 | will create the device file for the whole array and for the first 4 | |
966 | partitions. A different number of partitions can be specified at the | |
967 | end of this option (e.g. | |
7e23fc43 | 968 | .BR \-\-auto=p7 ). |
2ae555c3 | 969 | If the device name ends with a digit, the partition names add a 'p', |
e0fe762a N |
970 | and a number, e.g. |
971 | .IR /dev/md/home1p3 . | |
972 | If there is no trailing digit, then the partition names just have a | |
973 | number added, e.g. | |
974 | .IR /dev/md/scratch3 . | |
dd0781e5 | 975 | |
48f7b27a NB |
976 | If the md device name is in a 'standard' format as described in DEVICE |
977 | NAMES, then it will be created, if necessary, with the appropriate | |
e0fe762a N |
978 | device number based on that name. If the device name is not in one of these |
979 | formats, then a unused device number will be allocated. The device | |
48f7b27a NB |
980 | number will be considered unused if there is no active array for that |
981 | number, and there is no entry in /dev for that number and with a | |
e0fe762a | 982 | non-standard name. Names that are not in 'standard' format are only |
8fd8d9c4 N |
983 | allowed in "/dev/md/". |
984 | ||
3c7efacb NK |
985 | This is meaningful with |
986 | .B \-\-create | |
987 | or | |
988 | .BR \-\-build . | |
989 | ||
3c7efacb NK |
990 | .TP |
991 | .BR \-a ", " "\-\-add" | |
992 | This option can be used in Grow mode in two cases. | |
993 | ||
994 | If the target array is a Linear array, then | |
995 | .B \-\-add | |
996 | can be used to add one or more devices to the array. They | |
997 | are simply catenated on to the end of the array. Once added, the | |
998 | devices cannot be removed. | |
999 | ||
1000 | If the | |
1001 | .B \-\-raid\-disks | |
1002 | option is being used to increase the number of devices in an array, | |
1003 | then | |
1004 | .B \-\-add | |
1005 | can be used to add some extra devices to be included in the array. | |
1006 | In most cases this is not needed as the extra devices can be added as | |
1007 | spares first, and then the number of raid-disks can be changed. | |
1008 | However for RAID0, it is not possible to add spares. So to increase | |
1009 | the number of devices in a RAID0, it is necessary to set the new | |
1010 | number of devices, and to add the new devices, in the same command. | |
1011 | ||
529e2aa5 GJ |
1012 | .TP |
1013 | .BR \-\-nodes | |
1014 | Only works when the array is for clustered environment. It specifies | |
1015 | the maximum number of nodes in the cluster that will use this device | |
1016 | simultaneously. If not specified, this defaults to 4. | |
1017 | ||
28d74446 SL |
1018 | .TP |
1019 | .BR \-\-write-journal | |
1020 | Specify journal device for the RAID-4/5/6 array. The journal device | |
1021 | should be a SSD with reasonable lifetime. | |
1022 | ||
d64c2283 ZL |
1023 | .TP |
1024 | .BR \-\-symlinks | |
1025 | Auto creation of symlinks in /dev to /dev/md, option --symlinks must | |
1026 | be 'no' or 'yes' and work with --create and --build. | |
1027 | ||
5308f117 AP |
1028 | .TP |
1029 | .BR \-k ", " \-\-consistency\-policy= | |
1030 | Specify how the array maintains consistency in case of unexpected shutdown. | |
1031 | Only relevant for RAID levels with redundancy. | |
1032 | Currently supported options are: | |
1033 | .RS | |
1034 | ||
1035 | .TP | |
1036 | .B resync | |
1037 | Full resync is performed and all redundancy is regenerated when the array is | |
1038 | started after unclean shutdown. | |
1039 | ||
1040 | .TP | |
1041 | .B bitmap | |
1042 | Resync assisted by a write-intent bitmap. Implicitly selected when using | |
1043 | .BR \-\-bitmap . | |
1044 | ||
1045 | .TP | |
1046 | .B journal | |
1047 | For RAID levels 4/5/6, journal device is used to log transactions and replay | |
1048 | after unclean shutdown. Implicitly selected when using | |
1049 | .BR \-\-write\-journal . | |
1050 | ||
1051 | .TP | |
1052 | .B ppl | |
1053 | For RAID5 only, Partial Parity Log is used to close the write hole and | |
1054 | eliminate resync. PPL is stored in the metadata region of RAID member drives, | |
1055 | no additional journal drive is needed. | |
860f11ed AP |
1056 | |
1057 | .PP | |
1058 | Can be used with \-\-grow to change the consistency policy of an active array | |
1059 | in some cases. See CONSISTENCY POLICY CHANGES below. | |
5308f117 AP |
1060 | .RE |
1061 | ||
28d74446 | 1062 | |
52826846 NB |
1063 | .SH For assemble: |
1064 | ||
cd29a5c8 | 1065 | .TP |
7e23fc43 | 1066 | .BR \-u ", " \-\-uuid= |
e0fe762a | 1067 | uuid of array to assemble. Devices which don't have this uuid are |
cd29a5c8 NB |
1068 | excluded |
1069 | ||
1070 | .TP | |
7e23fc43 | 1071 | .BR \-m ", " \-\-super\-minor= |
cd29a5c8 NB |
1072 | Minor number of device that array was created for. Devices which |
1073 | don't have this minor number are excluded. If you create an array as | |
2d465520 | 1074 | /dev/md1, then all superblocks will contain the minor number 1, even if |
cd29a5c8 NB |
1075 | the array is later assembled as /dev/md2. |
1076 | ||
d013a55e | 1077 | Giving the literal word "dev" for |
7e23fc43 | 1078 | .B \-\-super\-minor |
d013a55e NB |
1079 | will cause |
1080 | .I mdadm | |
1081 | to use the minor number of the md device that is being assembled. | |
1082 | e.g. when assembling | |
1083 | .BR /dev/md0 , | |
51ac42e3 | 1084 | .B \-\-super\-minor=dev |
d013a55e NB |
1085 | will look for super blocks with a minor number of 0. |
1086 | ||
e0fe762a N |
1087 | .B \-\-super\-minor |
1088 | is only relevant for v0.90 metadata, and should not normally be used. | |
1089 | Using | |
1090 | .B \-\-uuid | |
1091 | is much safer. | |
1092 | ||
947fd4dd | 1093 | .TP |
7e23fc43 | 1094 | .BR \-N ", " \-\-name= |
947fd4dd | 1095 | Specify the name of the array to assemble. This must be the name |
624920bb | 1096 | that was specified when creating the array. It must either match |
93e790af | 1097 | the name stored in the superblock exactly, or it must match |
41a3b72a | 1098 | with the current |
624920bb | 1099 | .I homehost |
93e790af | 1100 | prefixed to the start of the given name. |
947fd4dd | 1101 | |
cd29a5c8 | 1102 | .TP |
7e23fc43 | 1103 | .BR \-f ", " \-\-force |
e0fe762a N |
1104 | Assemble the array even if the metadata on some devices appears to be |
1105 | out-of-date. If | |
1106 | .I mdadm | |
1107 | cannot find enough working devices to start the array, but can find | |
1108 | some devices that are recorded as having failed, then it will mark | |
1109 | those devices as working so that the array can be started. | |
1110 | An array which requires | |
1111 | .B \-\-force | |
1112 | to be started may contain data corruption. Use it carefully. | |
52826846 | 1113 | |
cd29a5c8 | 1114 | .TP |
7e23fc43 | 1115 | .BR \-R ", " \-\-run |
b8a8ccf9 NB |
1116 | Attempt to start the array even if fewer drives were given than were |
1117 | present last time the array was active. Normally if not all the | |
1118 | expected drives are found and | |
7e23fc43 | 1119 | .B \-\-scan |
cd29a5c8 NB |
1120 | is not used, then the array will be assembled but not started. |
1121 | With | |
7e23fc43 | 1122 | .B \-\-run |
cd29a5c8 | 1123 | an attempt will be made to start it anyway. |
52826846 | 1124 | |
b8a8ccf9 | 1125 | .TP |
7e23fc43 | 1126 | .B \-\-no\-degraded |
b8a8ccf9 | 1127 | This is the reverse of |
7e23fc43 | 1128 | .B \-\-run |
93e790af | 1129 | in that it inhibits the startup of array unless all expected drives |
b8a8ccf9 | 1130 | are present. This is only needed with |
93e790af SW |
1131 | .B \-\-scan, |
1132 | and can be used if the physical connections to devices are | |
b8a8ccf9 NB |
1133 | not as reliable as you would like. |
1134 | ||
dd0781e5 | 1135 | .TP |
7e23fc43 | 1136 | .BR \-a ", " "\-\-auto{=no,yes,md,mdp,part}" |
dd0781e5 NB |
1137 | See this option under Create and Build options. |
1138 | ||
e793c2e5 | 1139 | .TP |
7e23fc43 | 1140 | .BR \-b ", " \-\-bitmap= |
2ae555c3 NB |
1141 | Specify the bitmap file that was given when the array was created. If |
1142 | an array has an | |
1143 | .B internal | |
1144 | bitmap, there is no need to specify this when assembling the array. | |
1145 | ||
1146 | .TP | |
7e23fc43 | 1147 | .BR \-\-backup\-file= |
2ae555c3 | 1148 | If |
7e23fc43 | 1149 | .B \-\-backup\-file |
87f26d14 N |
1150 | was used while reshaping an array (e.g. changing number of devices or |
1151 | chunk size) and the system crashed during the critical section, then the same | |
7e23fc43 | 1152 | .B \-\-backup\-file |
53e8b987 | 1153 | must be presented to |
7e23fc43 | 1154 | .B \-\-assemble |
cd19c0cf JR |
1155 | to allow possibly corrupted data to be restored, and the reshape |
1156 | to be completed. | |
e793c2e5 | 1157 | |
87f26d14 N |
1158 | .TP |
1159 | .BR \-\-invalid\-backup | |
1160 | If the file needed for the above option is not available for any | |
1161 | reason an empty file can be given together with this option to | |
1162 | indicate that the backup file is invalid. In this case the data that | |
1163 | was being rearranged at the time of the crash could be irrecoverably | |
1164 | lost, but the rest of the array may still be recoverable. This option | |
1165 | should only be used as a last resort if there is no way to recover the | |
1166 | backup file. | |
1167 | ||
1168 | ||
5787fa49 | 1169 | .TP |
7e23fc43 | 1170 | .BR \-U ", " \-\-update= |
5787fa49 | 1171 | Update the superblock on each device while assembling the array. The |
feb716e9 NB |
1172 | argument given to this flag can be one of |
1173 | .BR sparc2.2 , | |
1174 | .BR summaries , | |
7d99579f | 1175 | .BR uuid , |
c4f12c13 | 1176 | .BR name , |
7e6e839a | 1177 | .BR nodes , |
0237e0ca | 1178 | .BR homehost , |
0aa2f15b | 1179 | .BR home-cluster , |
e5329c37 | 1180 | .BR resync , |
586ed405 | 1181 | .BR byteorder , |
bee8ec56 | 1182 | .BR devicesize , |
5a31170d | 1183 | .BR no\-bitmap , |
688e99a7 | 1184 | .BR bbl , |
47120ad5 | 1185 | .BR no\-bbl , |
e6e9dd3f AP |
1186 | .BR ppl , |
1187 | .BR no\-ppl , | |
afa368f4 | 1188 | .BR metadata , |
5787fa49 | 1189 | or |
7e23fc43 | 1190 | .BR super\-minor . |
5787fa49 NB |
1191 | |
1192 | The | |
1193 | .B sparc2.2 | |
7d99579f | 1194 | option will adjust the superblock of an array what was created on a Sparc |
5787fa49 NB |
1195 | machine running a patched 2.2 Linux kernel. This kernel got the |
1196 | alignment of part of the superblock wrong. You can use the | |
7e23fc43 | 1197 | .B "\-\-examine \-\-sparc2.2" |
5787fa49 NB |
1198 | option to |
1199 | .I mdadm | |
1200 | to see what effect this would have. | |
1201 | ||
1202 | The | |
7e23fc43 | 1203 | .B super\-minor |
5787fa49 | 1204 | option will update the |
2ae555c3 | 1205 | .B "preferred minor" |
5787fa49 | 1206 | field on each superblock to match the minor number of the array being |
45c073c9 NB |
1207 | assembled. |
1208 | This can be useful if | |
7e23fc43 | 1209 | .B \-\-examine |
45c073c9 | 1210 | reports a different "Preferred Minor" to |
7e23fc43 | 1211 | .BR \-\-detail . |
45c073c9 | 1212 | In some cases this update will be performed automatically |
e0fe762a | 1213 | by the kernel driver. In particular the update happens automatically |
45c073c9 NB |
1214 | at the first write to an array with redundancy (RAID level 1 or |
1215 | greater) on a 2.6 (or later) kernel. | |
5787fa49 | 1216 | |
7d99579f NB |
1217 | The |
1218 | .B uuid | |
1219 | option will change the uuid of the array. If a UUID is given with the | |
7e23fc43 | 1220 | .B \-\-uuid |
53e8b987 | 1221 | option that UUID will be used as a new UUID and will |
7d99579f NB |
1222 | .B NOT |
1223 | be used to help identify the devices in the array. | |
53e8b987 | 1224 | If no |
7e23fc43 | 1225 | .B \-\-uuid |
53e8b987 | 1226 | is given, a random UUID is chosen. |
7d99579f | 1227 | |
c4f12c13 NB |
1228 | The |
1229 | .B name | |
1230 | option will change the | |
1231 | .I name | |
b3774a48 GJ |
1232 | of the array as stored in the superblock. This is only supported for |
1233 | version-1 superblocks. | |
7e6e839a GJ |
1234 | |
1235 | The | |
1236 | .B nodes | |
1237 | option will change the | |
1238 | .I nodes | |
b3774a48 GJ |
1239 | of the array as stored in the bitmap superblock. This option only |
1240 | works for a clustered environment. | |
c4f12c13 | 1241 | |
0237e0ca NB |
1242 | The |
1243 | .B homehost | |
1244 | option will change the | |
1245 | .I homehost | |
1246 | as recorded in the superblock. For version-0 superblocks, this is the | |
1247 | same as updating the UUID. | |
1248 | For version-1 superblocks, this involves updating the name. | |
1249 | ||
0aa2f15b GJ |
1250 | The |
1251 | .B home\-cluster | |
1252 | option will change the cluster name as recorded in the superblock and | |
1253 | bitmap. This option only works for clustered environment. | |
1254 | ||
e5329c37 NB |
1255 | The |
1256 | .B resync | |
1257 | option will cause the array to be marked | |
1258 | .I dirty | |
e0fe762a N |
1259 | meaning that any redundancy in the array (e.g. parity for RAID5, |
1260 | copies for RAID1) may be incorrect. This will cause the RAID system | |
e5329c37 NB |
1261 | to perform a "resync" pass to make sure that all redundant information |
1262 | is correct. | |
1263 | ||
586ed405 NB |
1264 | The |
1265 | .B byteorder | |
1266 | option allows arrays to be moved between machines with different | |
4224685f N |
1267 | byte-order, such as from a big-endian machine like a Sparc or some |
1268 | MIPS machines, to a little-endian x86_64 machine. | |
2ae555c3 | 1269 | When assembling such an array for the first time after a move, giving |
7e23fc43 | 1270 | .B "\-\-update=byteorder" |
586ed405 NB |
1271 | will cause |
1272 | .I mdadm | |
1273 | to expect superblocks to have their byteorder reversed, and will | |
1274 | correct that order before assembling the array. This is only valid | |
2ae555c3 | 1275 | with original (Version 0.90) superblocks. |
586ed405 | 1276 | |
feb716e9 NB |
1277 | The |
1278 | .B summaries | |
e0fe762a | 1279 | option will correct the summaries in the superblock. That is the |
feb716e9 | 1280 | counts of total, working, active, failed, and spare devices. |
5787fa49 | 1281 | |
bee8ec56 NB |
1282 | The |
1283 | .B devicesize | |
5a31170d | 1284 | option will rarely be of use. It applies to version 1.1 and 1.2 metadata |
bee8ec56 NB |
1285 | only (where the metadata is at the start of the device) and is only |
1286 | useful when the component device has changed size (typically become | |
1287 | larger). The version 1 metadata records the amount of the device that | |
1288 | can be used to store data, so if a device in a version 1.1 or 1.2 | |
1289 | array becomes larger, the metadata will still be visible, but the | |
1290 | extra space will not. In this case it might be useful to assemble the | |
1291 | array with | |
7e23fc43 | 1292 | .BR \-\-update=devicesize . |
bee8ec56 NB |
1293 | This will cause |
1294 | .I mdadm | |
1295 | to determine the maximum usable amount of space on each device and | |
1296 | update the relevant field in the metadata. | |
1297 | ||
afa368f4 N |
1298 | The |
1299 | .B metadata | |
1300 | option only works on v0.90 metadata arrays and will convert them to | |
1301 | v1.0 metadata. The array must not be dirty (i.e. it must not need a | |
1302 | sync) and it must not have a write-intent bitmap. | |
1303 | ||
1304 | The old metadata will remain on the devices, but will appear older | |
1305 | than the new metadata and so will usually be ignored. The old metadata | |
1306 | (or indeed the new metadata) can be removed by giving the appropriate | |
1307 | .B \-\-metadata= | |
1308 | option to | |
1309 | .BR \-\-zero\-superblock . | |
1310 | ||
5a31170d N |
1311 | The |
1312 | .B no\-bitmap | |
1313 | option can be used when an array has an internal bitmap which is | |
1314 | corrupt in some way so that assembling the array normally fails. It | |
1315 | will cause any internal bitmap to be ignored. | |
1316 | ||
688e99a7 N |
1317 | The |
1318 | .B bbl | |
1319 | option will reserve space in each device for a bad block list. This | |
1320 | will be 4K in size and positioned near the end of any free space | |
1321 | between the superblock and the data. | |
1322 | ||
1323 | The | |
1324 | .B no\-bbl | |
1325 | option will cause any reservation of space for a bad block list to be | |
1326 | removed. If the bad block list contains entries, this will fail, as | |
1327 | removing the list could cause data corruption. | |
1328 | ||
e6e9dd3f AP |
1329 | The |
1330 | .B ppl | |
1331 | option will enable PPL for a RAID5 array and reserve space for PPL on each | |
1332 | device. There must be enough free space between the data and superblock and a | |
1333 | write-intent bitmap or journal must not be used. | |
1334 | ||
1335 | The | |
1336 | .B no\-ppl | |
1337 | option will disable PPL in the superblock. | |
1338 | ||
afd0a969 AK |
1339 | .TP |
1340 | .BR \-\-freeze\-reshape | |
1341 | Option is intended to be used in start-up scripts during initrd boot phase. | |
1342 | When array under reshape is assembled during initrd phase, this option | |
1343 | stops reshape after reshape critical section is being restored. This happens | |
1344 | before file system pivot operation and avoids loss of file system context. | |
1345 | Losing file system context would cause reshape to be broken. | |
1346 | ||
a6482415 N |
1347 | Reshape can be continued later using the |
1348 | .B \-\-continue | |
1349 | option for the grow command. | |
afd0a969 | 1350 | |
d64c2283 ZL |
1351 | .TP |
1352 | .BR \-\-symlinks | |
1353 | See this option under Create and Build options. | |
1354 | ||
e0d19036 | 1355 | .SH For Manage mode: |
52826846 | 1356 | |
3d5279b0 N |
1357 | .TP |
1358 | .BR \-t ", " \-\-test | |
1359 | Unless a more serious error occurred, | |
1360 | .I mdadm | |
1361 | will exit with a status of 2 if no changes were made to the array and | |
1362 | 0 if at least one change was made. | |
1363 | This can be useful when an indirect specifier such as | |
1364 | .BR missing , | |
1365 | .B detached | |
1366 | or | |
1367 | .B faulty | |
1368 | is used in requesting an operation on the array. | |
1369 | .B \-\-test | |
1370 | will report failure if these specifiers didn't find any match. | |
1371 | ||
cd29a5c8 | 1372 | .TP |
7e23fc43 | 1373 | .BR \-a ", " \-\-add |
3d5279b0 N |
1374 | hot-add listed devices. |
1375 | If a device appears to have recently been part of the array | |
342460cb | 1376 | (possibly it failed or was removed) the device is re\-added as described |
3d5279b0 N |
1377 | in the next point. |
1378 | If that fails or the device was never part of the array, the device is | |
1379 | added as a hot-spare. | |
1380 | If the array is degraded, it will immediately start to rebuild data | |
1381 | onto that spare. | |
1382 | ||
1383 | Note that this and the following options are only meaningful on array | |
1384 | with redundancy. They don't apply to RAID0 or Linear. | |
52826846 | 1385 | |
fe80f49b | 1386 | .TP |
7e23fc43 | 1387 | .BR \-\-re\-add |
eae6b036 | 1388 | re\-add a device that was previously removed from an array. |
3d5279b0 N |
1389 | If the metadata on the device reports that it is a member of the |
1390 | array, and the slot that it used is still vacant, then the device will | |
1391 | be added back to the array in the same position. This will normally | |
1392 | cause the data for that device to be recovered. However based on the | |
1393 | event count on the device, the recovery may only require sections that | |
1394 | are flagged a write-intent bitmap to be recovered or may not require | |
1395 | any recovery at all. | |
1396 | ||
1397 | When used on an array that has no metadata (i.e. it was built with | |
1398 | .BR \-\-build) | |
1399 | it will be assumed that bitmap-based recovery is enough to make the | |
1400 | device fully consistent with the array. | |
fe80f49b | 1401 | |
688e99a7 | 1402 | When used with v1.x metadata, |
833bb0f8 N |
1403 | .B \-\-re\-add |
1404 | can be accompanied by | |
688e99a7 N |
1405 | .BR \-\-update=devicesize , |
1406 | .BR \-\-update=bbl ", or" | |
1407 | .BR \-\-update=no\-bbl . | |
1408 | See the description of these option when used in Assemble mode for an | |
1409 | explanation of their use. | |
833bb0f8 | 1410 | |
a4e13010 N |
1411 | If the device name given is |
1412 | .B missing | |
262e3b7f N |
1413 | then |
1414 | .I mdadm | |
1415 | will try to find any device that looks like it should be | |
a4e13010 N |
1416 | part of the array but isn't and will try to re\-add all such devices. |
1417 | ||
262e3b7f N |
1418 | If the device name given is |
1419 | .B faulty | |
1420 | then | |
1421 | .I mdadm | |
1422 | will find all devices in the array that are marked | |
1423 | .BR faulty , | |
1424 | remove them and attempt to immediately re\-add them. This can be | |
1425 | useful if you are certain that the reason for failure has been | |
1426 | resolved. | |
1427 | ||
f33a71f1 N |
1428 | .TP |
1429 | .B \-\-add\-spare | |
1430 | Add a device as a spare. This is similar to | |
1431 | .B \-\-add | |
1432 | except that it does not attempt | |
1433 | .B \-\-re\-add | |
1434 | first. The device will be added as a spare even if it looks like it | |
1435 | could be an recent member of the array. | |
1436 | ||
cd29a5c8 | 1437 | .TP |
7e23fc43 | 1438 | .BR \-r ", " \-\-remove |
2d465520 | 1439 | remove listed devices. They must not be active. i.e. they should |
64a78416 N |
1440 | be failed or spare devices. |
1441 | ||
1442 | As well as the name of a device file | |
b80da661 NB |
1443 | (e.g. |
1444 | .BR /dev/sda1 ) | |
1445 | the words | |
64a78416 | 1446 | .BR failed , |
b80da661 | 1447 | .B detached |
64a78416 N |
1448 | and names like |
1449 | .B set-A | |
b80da661 NB |
1450 | can be given to |
1451 | .BR \-\-remove . | |
1452 | The first causes all failed device to be removed. The second causes | |
93e790af | 1453 | any device which is no longer connected to the system (i.e an 'open' |
b80da661 NB |
1454 | returns |
1455 | .BR ENXIO ) | |
64a78416 N |
1456 | to be removed. |
1457 | The third will remove a set as describe below under | |
1458 | .BR \-\-fail . | |
52826846 | 1459 | |
cd29a5c8 | 1460 | .TP |
7e23fc43 | 1461 | .BR \-f ", " \-\-fail |
70c55e36 | 1462 | Mark listed devices as faulty. |
b80da661 NB |
1463 | As well as the name of a device file, the word |
1464 | .B detached | |
64a78416 N |
1465 | or a set name like |
1466 | .B set\-A | |
1467 | can be given. The former will cause any device that has been detached from | |
b80da661 | 1468 | the system to be marked as failed. It can then be removed. |
52826846 | 1469 | |
64a78416 N |
1470 | For RAID10 arrays where the number of copies evenly divides the number |
1471 | of devices, the devices can be conceptually divided into sets where | |
1472 | each set contains a single complete copy of the data on the array. | |
1473 | Sometimes a RAID10 array will be configured so that these sets are on | |
1474 | separate controllers. In this case all the devices in one set can be | |
1475 | failed by giving a name like | |
1476 | .B set\-A | |
1477 | or | |
1478 | .B set\-B | |
1479 | to | |
1480 | .BR \-\-fail . | |
1481 | The appropriate set names are reported by | |
1482 | .BR \-\-detail . | |
1483 | ||
cd29a5c8 | 1484 | .TP |
7e23fc43 | 1485 | .BR \-\-set\-faulty |
53e8b987 | 1486 | same as |
7e23fc43 | 1487 | .BR \-\-fail . |
52826846 | 1488 | |
70c55e36 N |
1489 | .TP |
1490 | .B \-\-replace | |
1491 | Mark listed devices as requiring replacement. As soon as a spare is | |
1492 | available, it will be rebuilt and will replace the marked device. | |
1493 | This is similar to marking a device as faulty, but the device remains | |
1494 | in service during the recovery process to increase resilience against | |
1495 | multiple failures. When the replacement process finishes, the | |
1496 | replaced device will be marked as faulty. | |
1497 | ||
1498 | .TP | |
1499 | .B \-\-with | |
1500 | This can follow a list of | |
1501 | .B \-\-replace | |
1502 | devices. The devices listed after | |
1503 | .B \-\-with | |
1504 | will be preferentially used to replace the devices listed after | |
1505 | .BR \-\-replace . | |
1506 | These device must already be spare devices in the array. | |
1507 | ||
b3d31955 N |
1508 | .TP |
1509 | .BR \-\-write\-mostly | |
a4e13010 | 1510 | Subsequent devices that are added or re\-added will have the 'write-mostly' |
e0fe762a | 1511 | flag set. This is only valid for RAID1 and means that the 'md' driver |
b3d31955 N |
1512 | will avoid reading from these devices if possible. |
1513 | .TP | |
1514 | .BR \-\-readwrite | |
a4e13010 | 1515 | Subsequent devices that are added or re\-added will have the 'write-mostly' |
b3d31955 | 1516 | flag cleared. |
4de90913 GJ |
1517 | .TP |
1518 | .BR \-\-cluster\-confirm | |
1519 | Confirm the existence of the device. This is issued in response to an \-\-add | |
1520 | request by a node in a cluster. When a node adds a device it sends a message | |
1521 | to all nodes in the cluster to look for a device with a UUID. This translates | |
1522 | to a udev notification with the UUID of the device to be added and the slot | |
1523 | number. The receiving node must acknowledge this message | |
1524 | with \-\-cluster\-confirm. Valid arguments are <slot>:<devicename> in case | |
1525 | the device is found or <slot>:missing in case the device is not found. | |
b3d31955 | 1526 | |
ff3c881f SL |
1527 | .TP |
1528 | .BR \-\-add-journal | |
3373d49f SL |
1529 | Add journal to an existing array, or recreate journal for RAID-4/5/6 array |
1530 | that lost a journal device. To avoid interrupting on-going write opertions, | |
ff3c881f SL |
1531 | .B \-\-add-journal |
1532 | only works for array in Read-Only state. | |
1533 | ||
71574efb N |
1534 | .TP |
1535 | .BR \-\-failfast | |
1536 | Subsequent devices that are added or re\-added will have | |
1537 | the 'failfast' flag set. This is only valid for RAID1 and RAID10 and | |
1538 | means that the 'md' driver will avoid long timeouts on error handling | |
1539 | where possible. | |
1540 | .TP | |
1541 | .BR \-\-nofailfast | |
1542 | Subsequent devices that are re\-added will be re\-added without | |
1543 | the 'failfast' flag set. | |
1544 | ||
2ae555c3 | 1545 | .P |
e0fe762a | 1546 | Each of these options requires that the first device listed is the array |
93e790af | 1547 | to be acted upon, and the remainder are component devices to be added, |
e0fe762a | 1548 | removed, marked as faulty, etc. Several different operations can be |
2ae555c3 NB |
1549 | specified for different devices, e.g. |
1550 | .in +5 | |
7e23fc43 | 1551 | mdadm /dev/md0 \-\-add /dev/sda1 \-\-fail /dev/sdb1 \-\-remove /dev/sdb1 |
2ae555c3 NB |
1552 | .in -5 |
1553 | Each operation applies to all devices listed until the next | |
93e790af | 1554 | operation. |
2ae555c3 NB |
1555 | |
1556 | If an array is using a write-intent bitmap, then devices which have | |
a4e13010 | 1557 | been removed can be re\-added in a way that avoids a full |
93e790af | 1558 | reconstruction but instead just updates the blocks that have changed |
2ae555c3 NB |
1559 | since the device was removed. For arrays with persistent metadata |
1560 | (superblocks) this is done automatically. For arrays created with | |
7e23fc43 | 1561 | .B \-\-build |
2ae555c3 | 1562 | mdadm needs to be told that this device we removed recently with |
7e23fc43 | 1563 | .BR \-\-re\-add . |
2ae555c3 NB |
1564 | |
1565 | Devices can only be removed from an array if they are not in active | |
93e790af SW |
1566 | use, i.e. that must be spares or failed devices. To remove an active |
1567 | device, it must first be marked as | |
1568 | .B faulty. | |
2ae555c3 NB |
1569 | |
1570 | .SH For Misc mode: | |
1571 | ||
1572 | .TP | |
7e23fc43 | 1573 | .BR \-Q ", " \-\-query |
2ae555c3 NB |
1574 | Examine a device to see |
1575 | (1) if it is an md device and (2) if it is a component of an md | |
1576 | array. | |
1577 | Information about what is discovered is presented. | |
1578 | ||
1579 | .TP | |
7e23fc43 | 1580 | .BR \-D ", " \-\-detail |
e0fe762a | 1581 | Print details of one or more md devices. |
5787fa49 | 1582 | |
4cce4069 DW |
1583 | .TP |
1584 | .BR \-\-detail\-platform | |
e0fe762a | 1585 | Print details of the platform's RAID capabilities (firmware / hardware |
9eafa1de MN |
1586 | topology) for a given metadata format. If used without argument, mdadm |
1587 | will scan all controllers looking for their capabilities. Otherwise, mdadm | |
1588 | will only look at the controller specified by the argument in form of an | |
1589 | absolute filepath or a link, e.g. | |
1590 | .IR /sys/devices/pci0000:00/0000:00:1f.2 . | |
4cce4069 | 1591 | |
54bad364 KS |
1592 | .TP |
1593 | .BR \-Y ", " \-\-export | |
1594 | When used with | |
9ca39acb N |
1595 | .BR \-\-detail , |
1596 | .BR \-\-detail-platform , | |
0d726f17 | 1597 | .BR \-\-examine , |
9ca39acb N |
1598 | or |
1599 | .B \-\-incremental | |
54bad364 KS |
1600 | output will be formatted as |
1601 | .B key=value | |
1602 | pairs for easy import into the environment. | |
1603 | ||
9ca39acb N |
1604 | With |
1605 | .B \-\-incremental | |
1606 | The value | |
1607 | .B MD_STARTED | |
1608 | indicates whether an array was started | |
1609 | .RB ( yes ) | |
1610 | or not, which may include a reason | |
1611 | .RB ( unsafe ", " nothing ", " no ). | |
1612 | Also the value | |
1613 | .B MD_FOREIGN | |
1614 | indicates if the array is expected on this host | |
1615 | .RB ( no ), | |
1616 | or seems to be from elsewhere | |
1617 | .RB ( yes ). | |
1618 | ||
2ae555c3 | 1619 | .TP |
7e23fc43 | 1620 | .BR \-E ", " \-\-examine |
e0fe762a N |
1621 | Print contents of the metadata stored on the named device(s). |
1622 | Note the contrast between | |
1623 | .B \-\-examine | |
1624 | and | |
1625 | .BR \-\-detail . | |
1626 | .B \-\-examine | |
1627 | applies to devices which are components of an array, while | |
1628 | .B \-\-detail | |
1629 | applies to a whole array which is currently active. | |
5787fa49 | 1630 | .TP |
7e23fc43 | 1631 | .B \-\-sparc2.2 |
e0fe762a N |
1632 | If an array was created on a SPARC machine with a 2.2 Linux kernel |
1633 | patched with RAID support, the superblock will have been created | |
1634 | incorrectly, or at least incompatibly with 2.4 and later kernels. | |
1635 | Using the | |
7e23fc43 | 1636 | .B \-\-sparc2.2 |
5787fa49 | 1637 | flag with |
7e23fc43 | 1638 | .B \-\-examine |
5787fa49 NB |
1639 | will fix the superblock before displaying it. If this appears to do |
1640 | the right thing, then the array can be successfully assembled using | |
7e23fc43 | 1641 | .BR "\-\-assemble \-\-update=sparc2.2" . |
5787fa49 | 1642 | |
2ae555c3 | 1643 | .TP |
7e23fc43 | 1644 | .BR \-X ", " \-\-examine\-bitmap |
2ae555c3 | 1645 | Report information about a bitmap file. |
01d9299c | 1646 | The argument is either an external bitmap file or an array component |
e0fe762a N |
1647 | in case of an internal bitmap. Note that running this on an array |
1648 | device (e.g. | |
1649 | .BR /dev/md0 ) | |
1650 | does not report the bitmap for that array. | |
e0d19036 | 1651 | |
6d388a88 N |
1652 | .TP |
1653 | .B \-\-examine\-badblocks | |
1654 | List the bad-blocks recorded for the device, if a bad-blocks list has | |
1655 | been configured. Currently only | |
1656 | .B 1.x | |
1657 | metadata supports bad-blocks lists. | |
1658 | ||
74db60b0 N |
1659 | .TP |
1660 | .BI \-\-dump= directory | |
1661 | .TP | |
1662 | .BI \-\-restore= directory | |
1663 | Save metadata from lists devices, or restore metadata to listed devices. | |
1664 | ||
cd29a5c8 | 1665 | .TP |
7e23fc43 | 1666 | .BR \-R ", " \-\-run |
e0fe762a N |
1667 | start a partially assembled array. If |
1668 | .B \-\-assemble | |
1669 | did not find enough devices to fully start the array, it might leaving | |
1670 | it partially assembled. If you wish, you can then use | |
1671 | .B \-\-run | |
1672 | to start the array in degraded mode. | |
52826846 | 1673 | |
cd29a5c8 | 1674 | .TP |
7e23fc43 | 1675 | .BR \-S ", " \-\-stop |
cd29a5c8 | 1676 | deactivate array, releasing all resources. |
52826846 | 1677 | |
cd29a5c8 | 1678 | .TP |
7e23fc43 | 1679 | .BR \-o ", " \-\-readonly |
cd29a5c8 | 1680 | mark array as readonly. |
52826846 | 1681 | |
cd29a5c8 | 1682 | .TP |
7e23fc43 | 1683 | .BR \-w ", " \-\-readwrite |
cd29a5c8 | 1684 | mark array as readwrite. |
52826846 | 1685 | |
e0d19036 | 1686 | .TP |
7e23fc43 | 1687 | .B \-\-zero\-superblock |
e0d19036 | 1688 | If the device contains a valid md superblock, the block is |
35cc5be4 | 1689 | overwritten with zeros. With |
7e23fc43 | 1690 | .B \-\-force |
35cc5be4 | 1691 | the block where the superblock would be is overwritten even if it |
e0d19036 | 1692 | doesn't appear to be valid. |
52826846 | 1693 | |
33414a01 DW |
1694 | .TP |
1695 | .B \-\-kill\-subarray= | |
1696 | If the device is a container and the argument to \-\-kill\-subarray | |
1697 | specifies an inactive subarray in the container, then the subarray is | |
1698 | deleted. Deleting all subarrays will leave an 'empty-container' or | |
afa368f4 N |
1699 | spare superblock on the drives. See |
1700 | .B \-\-zero\-superblock | |
1701 | for completely | |
33414a01 DW |
1702 | removing a superblock. Note that some formats depend on the subarray |
1703 | index for generating a UUID, this command will fail if it would change | |
1704 | the UUID of an active subarray. | |
1705 | ||
aa534678 DW |
1706 | .TP |
1707 | .B \-\-update\-subarray= | |
1708 | If the device is a container and the argument to \-\-update\-subarray | |
1709 | specifies a subarray in the container, then attempt to update the given | |
1710 | superblock field in the subarray. See below in | |
1711 | .B MISC MODE | |
1712 | for details. | |
1713 | ||
feb716e9 | 1714 | .TP |
7e23fc43 | 1715 | .BR \-t ", " \-\-test |
feb716e9 | 1716 | When used with |
7e23fc43 | 1717 | .BR \-\-detail , |
feb716e9 NB |
1718 | the exit status of |
1719 | .I mdadm | |
e0fe762a N |
1720 | is set to reflect the status of the device. See below in |
1721 | .B MISC MODE | |
1722 | for details. | |
feb716e9 | 1723 | |
b90c0e9a | 1724 | .TP |
7e23fc43 | 1725 | .BR \-W ", " \-\-wait |
b90c0e9a NB |
1726 | For each md device given, wait for any resync, recovery, or reshape |
1727 | activity to finish before returning. | |
1728 | .I mdadm | |
1729 | will return with success if it actually waited for every device | |
1730 | listed, otherwise it will return failure. | |
1731 | ||
1770662b DW |
1732 | .TP |
1733 | .BR \-\-wait\-clean | |
fabbfd48 DW |
1734 | For each md device given, or each device in /proc/mdstat if |
1735 | .B \-\-scan | |
1736 | is given, arrange for the array to be marked clean as soon as possible. | |
7146ec6a DW |
1737 | .I mdadm |
1738 | will return with success if the array uses external metadata and we | |
1739 | successfully waited. For native arrays this returns immediately as the | |
6a0ee6a0 DW |
1740 | kernel handles dirty-clean transitions at shutdown. No action is taken |
1741 | if safe-mode handling is disabled. | |
1770662b | 1742 | |
a740cf64 N |
1743 | .TP |
1744 | .B \-\-action= | |
1745 | Set the "sync_action" for all md devices given to one of | |
1746 | .BR idle , | |
1747 | .BR frozen , | |
1748 | .BR check , | |
1749 | .BR repair . | |
1750 | Setting to | |
1751 | .B idle | |
1752 | will abort any currently running action though some actions will | |
1753 | automatically restart. | |
1754 | Setting to | |
1755 | .B frozen | |
1756 | will abort any current action and ensure no other action starts | |
1757 | automatically. | |
1758 | ||
1759 | Details of | |
1760 | .B check | |
1761 | and | |
1762 | .B repair | |
1763 | can be found it | |
1764 | .IR md (4) | |
1765 | under | |
1766 | .BR "SCRUBBING AND MISMATCHES" . | |
1767 | ||
8382f19b NB |
1768 | .SH For Incremental Assembly mode: |
1769 | .TP | |
7e23fc43 | 1770 | .BR \-\-rebuild\-map ", " \-r |
8382f19b | 1771 | Rebuild the map file |
96fd06ed | 1772 | .RB ( {MAP_PATH} ) |
8382f19b NB |
1773 | that |
1774 | .I mdadm | |
1775 | uses to help track which arrays are currently being assembled. | |
1776 | ||
1777 | .TP | |
7e23fc43 | 1778 | .BR \-\-run ", " \-R |
8382f19b NB |
1779 | Run any array assembled as soon as a minimal number of devices are |
1780 | available, rather than waiting until all expected devices are present. | |
1781 | ||
1782 | .TP | |
7e23fc43 | 1783 | .BR \-\-scan ", " \-s |
8382f19b | 1784 | Only meaningful with |
7e23fc43 | 1785 | .B \-R |
8382f19b NB |
1786 | this will scan the |
1787 | .B map | |
1788 | file for arrays that are being incrementally assembled and will try to | |
1789 | start any that are not already started. If any such array is listed | |
1790 | in | |
1791 | .B mdadm.conf | |
1792 | as requiring an external bitmap, that bitmap will be attached first. | |
1793 | ||
29ba4804 N |
1794 | .TP |
1795 | .BR \-\-fail ", " \-f | |
1796 | This allows the hot-plug system to remove devices that have fully disappeared | |
1797 | from the kernel. It will first fail and then remove the device from any | |
1798 | array it belongs to. | |
1799 | The device name given should be a kernel device name such as "sda", | |
1800 | not a name in | |
1801 | .IR /dev . | |
1802 | ||
210597d1 PC |
1803 | .TP |
1804 | .BR \-\-path= | |
87eb4fab N |
1805 | Only used with \-\-fail. The 'path' given will be recorded so that if |
1806 | a new device appears at the same location it can be automatically | |
1807 | added to the same array. This allows the failed device to be | |
1808 | automatically replaced by a new device without metadata if it appears | |
1809 | at specified path. This option is normally only set by a | |
1810 | .I udev | |
1811 | script. | |
210597d1 | 1812 | |
e0d19036 NB |
1813 | .SH For Monitor mode: |
1814 | .TP | |
7e23fc43 | 1815 | .BR \-m ", " \-\-mail |
e0d19036 NB |
1816 | Give a mail address to send alerts to. |
1817 | ||
1818 | .TP | |
7e23fc43 | 1819 | .BR \-p ", " \-\-program ", " \-\-alert |
e0d19036 NB |
1820 | Give a program to be run whenever an event is detected. |
1821 | ||
773135f5 | 1822 | .TP |
7e23fc43 | 1823 | .BR \-y ", " \-\-syslog |
773135f5 NB |
1824 | Cause all events to be reported through 'syslog'. The messages have |
1825 | facility of 'daemon' and varying priorities. | |
1826 | ||
e0d19036 | 1827 | .TP |
7e23fc43 | 1828 | .BR \-d ", " \-\-delay |
e0d19036 | 1829 | Give a delay in seconds. |
51ac42e3 | 1830 | .I mdadm |
e0d19036 | 1831 | polls the md arrays and then waits this many seconds before polling |
e0fe762a N |
1832 | again. The default is 60 seconds. Since 2.6.16, there is no need to |
1833 | reduce this as the kernel alerts | |
1834 | .I mdadm | |
1835 | immediately when there is any change. | |
e0d19036 | 1836 | |
9a36a9b7 ZB |
1837 | .TP |
1838 | .BR \-r ", " \-\-increment | |
1839 | Give a percentage increment. | |
1840 | .I mdadm | |
1841 | will generate RebuildNN events with the given percentage increment. | |
1842 | ||
d013a55e | 1843 | .TP |
7e23fc43 | 1844 | .BR \-f ", " \-\-daemonise |
d013a55e | 1845 | Tell |
51ac42e3 | 1846 | .I mdadm |
d013a55e | 1847 | to run as a background daemon if it decides to monitor anything. This |
e0fe762a | 1848 | causes it to fork and run in the child, and to disconnect from the |
d013a55e NB |
1849 | terminal. The process id of the child is written to stdout. |
1850 | This is useful with | |
7e23fc43 | 1851 | .B \-\-scan |
d013a55e NB |
1852 | which will only continue monitoring if a mail address or alert program |
1853 | is found in the config file. | |
1854 | ||
b5e64645 | 1855 | .TP |
7e23fc43 | 1856 | .BR \-i ", " \-\-pid\-file |
b5e64645 | 1857 | When |
51ac42e3 | 1858 | .I mdadm |
b5e64645 NB |
1859 | is running in daemon mode, write the pid of the daemon process to |
1860 | the specified file, instead of printing it on standard output. | |
1861 | ||
aa88f531 | 1862 | .TP |
7e23fc43 | 1863 | .BR \-1 ", " \-\-oneshot |
aa88f531 NB |
1864 | Check arrays only once. This will generate |
1865 | .B NewArray | |
1866 | events and more significantly | |
1867 | .B DegradedArray | |
a9d69660 NB |
1868 | and |
1869 | .B SparesMissing | |
aa88f531 NB |
1870 | events. Running |
1871 | .in +5 | |
7e23fc43 | 1872 | .B " mdadm \-\-monitor \-\-scan \-1" |
aa88f531 NB |
1873 | .in -5 |
1874 | from a cron script will ensure regular notification of any degraded arrays. | |
1875 | ||
98c6faba | 1876 | .TP |
7e23fc43 | 1877 | .BR \-t ", " \-\-test |
98c6faba NB |
1878 | Generate a |
1879 | .B TestMessage | |
1880 | alert for every array found at startup. This alert gets mailed and | |
1881 | passed to the alert program. This can be used for testing that alert | |
a9d69660 | 1882 | message do get through successfully. |
98c6faba | 1883 | |
210597d1 PC |
1884 | .TP |
1885 | .BR \-\-no\-sharing | |
87eb4fab | 1886 | This inhibits the functionality for moving spares between arrays. |
210597d1 PC |
1887 | Only one monitoring process started with |
1888 | .B \-\-scan | |
87eb4fab N |
1889 | but without this flag is allowed, otherwise the two could interfere |
1890 | with each other. | |
210597d1 | 1891 | |
e0d19036 | 1892 | .SH ASSEMBLE MODE |
52826846 | 1893 | |
cd29a5c8 NB |
1894 | .HP 12 |
1895 | Usage: | |
7e23fc43 | 1896 | .B mdadm \-\-assemble |
5787fa49 NB |
1897 | .I md-device options-and-component-devices... |
1898 | .HP 12 | |
1899 | Usage: | |
7e23fc43 | 1900 | .B mdadm \-\-assemble \-\-scan |
e0fe762a | 1901 | .I md-devices-and-options... |
cd29a5c8 NB |
1902 | .HP 12 |
1903 | Usage: | |
7e23fc43 | 1904 | .B mdadm \-\-assemble \-\-scan |
e0fe762a | 1905 | .I options... |
52826846 | 1906 | |
cd29a5c8 | 1907 | .PP |
e0fe762a | 1908 | This usage assembles one or more RAID arrays from pre-existing components. |
9a9dab36 | 1909 | For each array, mdadm needs to know the md device, the identity of the |
e0fe762a | 1910 | array, and a number of component-devices. These can be found in a number of ways. |
52826846 | 1911 | |
5787fa49 | 1912 | In the first usage example (without the |
7e23fc43 | 1913 | .BR \-\-scan ) |
5787fa49 NB |
1914 | the first device given is the md device. |
1915 | In the second usage example, all devices listed are treated as md | |
1916 | devices and assembly is attempted. | |
1917 | In the third (where no devices are listed) all md devices that are | |
cb77f620 | 1918 | listed in the configuration file are assembled. If no arrays are |
e0fe762a N |
1919 | described by the configuration file, then any arrays that |
1920 | can be found on unused devices will be assembled. | |
52826846 | 1921 | |
d013a55e | 1922 | If precisely one device is listed, but |
7e23fc43 | 1923 | .B \-\-scan |
dd0781e5 | 1924 | is not given, then |
d013a55e NB |
1925 | .I mdadm |
1926 | acts as though | |
7e23fc43 | 1927 | .B \-\-scan |
93e790af | 1928 | was given and identity information is extracted from the configuration file. |
d013a55e | 1929 | |
2ae555c3 | 1930 | The identity can be given with the |
7e23fc43 | 1931 | .B \-\-uuid |
e0fe762a N |
1932 | option, the |
1933 | .B \-\-name | |
1934 | option, or the | |
7e23fc43 | 1935 | .B \-\-super\-minor |
93e790af SW |
1936 | option, will be taken from the md-device record in the config file, or |
1937 | will be taken from the super block of the first component-device | |
1938 | listed on the command line. | |
52826846 | 1939 | |
2ae555c3 | 1940 | Devices can be given on the |
7e23fc43 | 1941 | .B \-\-assemble |
e0fe762a | 1942 | command line or in the config file. Only devices which have an md |
5787fa49 NB |
1943 | superblock which contains the right identity will be considered for |
1944 | any array. | |
52826846 | 1945 | |
2ae555c3 | 1946 | The config file is only used if explicitly named with |
7e23fc43 | 1947 | .B \-\-config |
d013a55e | 1948 | or requested with (a possibly implicit) |
7e23fc43 | 1949 | .BR \-\-scan . |
52826846 | 1950 | In the later case, |
9a9dab36 | 1951 | .B /etc/mdadm.conf |
8fd8d9c4 N |
1952 | or |
1953 | .B /etc/mdadm/mdadm.conf | |
52826846 NB |
1954 | is used. |
1955 | ||
2ae555c3 | 1956 | If |
7e23fc43 | 1957 | .B \-\-scan |
cd29a5c8 NB |
1958 | is not given, then the config file will only be used to find the |
1959 | identity of md arrays. | |
52826846 | 1960 | |
2d465520 | 1961 | Normally the array will be started after it is assembled. However if |
7e23fc43 | 1962 | .B \-\-scan |
e0fe762a N |
1963 | is not given and not all expected drives were listed, then the array |
1964 | is not started (to guard against usage errors). To insist that the | |
1965 | array be started in this case (as may work for RAID1, 4, 5, 6, or 10), | |
1966 | give the | |
7e23fc43 | 1967 | .B \-\-run |
cd29a5c8 | 1968 | flag. |
52826846 | 1969 | |
e0fe762a N |
1970 | If |
1971 | .I udev | |
1972 | is active, | |
1973 | .I mdadm | |
1974 | does not create any entries in | |
dd0781e5 | 1975 | .B /dev |
e0fe762a N |
1976 | but leaves that to |
1977 | .IR udev . | |
1978 | It does record information in | |
96fd06ed | 1979 | .B {MAP_PATH} |
e0fe762a N |
1980 | which will allow |
1981 | .I udev | |
1982 | to choose the correct name. | |
dd0781e5 | 1983 | |
e0fe762a N |
1984 | If |
1985 | .I mdadm | |
1986 | detects that udev is not configured, it will create the devices in | |
1987 | .B /dev | |
1988 | itself. | |
dd0781e5 | 1989 | |
e0fe762a N |
1990 | In Linux kernels prior to version 2.6.28 there were two distinctly |
1991 | different types of md devices that could be created: one that could be | |
1992 | partitioned using standard partitioning tools and one that could not. | |
1993 | Since 2.6.28 that distinction is no longer relevant as both type of | |
1994 | devices can be partitioned. | |
1995 | .I mdadm | |
1996 | will normally create the type that originally could not be partitioned | |
1997 | as it has a well defined major number (9). | |
dd0781e5 | 1998 | |
e0fe762a N |
1999 | Prior to 2.6.28, it is important that mdadm chooses the correct type |
2000 | of array device to use. This can be controlled with the | |
2001 | .B \-\-auto | |
2002 | option. In particular, a value of "mdp" or "part" or "p" tells mdadm | |
2003 | to use a partitionable device rather than the default. | |
dd0781e5 | 2004 | |
e0fe762a N |
2005 | In the no-udev case, the value given to |
2006 | .B \-\-auto | |
2007 | can be suffixed by a number. This tells | |
2008 | .I mdadm | |
2009 | to create that number of partition devices rather than the default of 4. | |
dd0781e5 | 2010 | |
e0fe762a | 2011 | The value given to |
7e23fc43 | 2012 | .B \-\-auto |
e0fe762a N |
2013 | can also be given in the configuration file as a word starting |
2014 | .B auto= | |
2015 | on the ARRAY line for the relevant array. | |
52826846 | 2016 | |
41a3b72a NB |
2017 | .SS Auto Assembly |
2018 | When | |
7e23fc43 | 2019 | .B \-\-assemble |
41a3b72a | 2020 | is used with |
7e23fc43 | 2021 | .B \-\-scan |
41a3b72a NB |
2022 | and no devices are listed, |
2023 | .I mdadm | |
2024 | will first attempt to assemble all the arrays listed in the config | |
2025 | file. | |
2026 | ||
cb77f620 | 2027 | If no arrays are listed in the config (other than those marked |
e0fe762a N |
2028 | .BR <ignore> ) |
2029 | it will look through the available devices for possible arrays and | |
2030 | will try to assemble anything that it finds. Arrays which are tagged | |
2031 | as belonging to the given homehost will be assembled and started | |
2032 | normally. Arrays which do not obviously belong to this host are given | |
2033 | names that are expected not to conflict with anything local, and are | |
2034 | started "read-auto" so that nothing is written to any device until the | |
2035 | array is written to. i.e. automatic resync etc is delayed. | |
41a3b72a NB |
2036 | |
2037 | If | |
2038 | .I mdadm | |
2039 | finds a consistent set of devices that look like they should comprise | |
2040 | an array, and if the superblock is tagged as belonging to the given | |
2041 | home host, it will automatically choose a device name and try to | |
2042 | assemble the array. If the array uses version-0.90 metadata, then the | |
2043 | .B minor | |
2044 | number as recorded in the superblock is used to create a name in | |
2045 | .B /dev/md/ | |
2046 | so for example | |
2047 | .BR /dev/md/3 . | |
2048 | If the array uses version-1 metadata, then the | |
2049 | .B name | |
2050 | from the superblock is used to similarly create a name in | |
e0fe762a | 2051 | .B /dev/md/ |
93e790af | 2052 | (the name will have any 'host' prefix stripped first). |
41a3b72a | 2053 | |
c64ba03a N |
2054 | This behaviour can be modified by the |
2055 | .I AUTO | |
2056 | line in the | |
2057 | .I mdadm.conf | |
2058 | configuration file. This line can indicate that specific metadata | |
2059 | type should, or should not, be automatically assembled. If an array | |
2060 | is found which is not listed in | |
2061 | .I mdadm.conf | |
2062 | and has a metadata format that is denied by the | |
2063 | .I AUTO | |
2064 | line, then it will not be assembled. | |
2065 | The | |
2066 | .I AUTO | |
2067 | line can also request that all arrays identified as being for this | |
2068 | homehost should be assembled regardless of their metadata type. | |
2069 | See | |
2070 | .IR mdadm.conf (5) | |
2071 | for further details. | |
2072 | ||
246cebdb AK |
2073 | Note: Auto assembly cannot be used for assembling and activating some |
2074 | arrays which are undergoing reshape. In particular as the | |
2075 | .B backup\-file | |
2076 | cannot be given, any reshape which requires a backup-file to continue | |
2077 | cannot be started by auto assembly. An array which is growing to more | |
2078 | devices and has passed the critical section can be assembled using | |
2079 | auto-assembly. | |
41a3b72a | 2080 | |
cd29a5c8 | 2081 | .SH BUILD MODE |
52826846 | 2082 | |
cd29a5c8 NB |
2083 | .HP 12 |
2084 | Usage: | |
7e23fc43 | 2085 | .B mdadm \-\-build |
93e790af | 2086 | .I md-device |
7e23fc43 PS |
2087 | .BI \-\-chunk= X |
2088 | .BI \-\-level= Y | |
2089 | .BI \-\-raid\-devices= Z | |
cd29a5c8 NB |
2090 | .I devices |
2091 | ||
2092 | .PP | |
2ae555c3 | 2093 | This usage is similar to |
7e23fc43 | 2094 | .BR \-\-create . |
e0fe762a | 2095 | The difference is that it creates an array without a superblock. With |
cd29a5c8 | 2096 | these arrays there is no difference between initially creating the array and |
52826846 NB |
2097 | subsequently assembling the array, except that hopefully there is useful |
2098 | data there in the second case. | |
2099 | ||
e0fe762a N |
2100 | The level may raid0, linear, raid1, raid10, multipath, or faulty, or |
2101 | one of their synonyms. All devices must be listed and the array will | |
2102 | be started once complete. It will often be appropriate to use | |
2103 | .B \-\-assume\-clean | |
2104 | with levels raid1 or raid10. | |
cd29a5c8 NB |
2105 | |
2106 | .SH CREATE MODE | |
2107 | ||
2108 | .HP 12 | |
2109 | Usage: | |
7e23fc43 | 2110 | .B mdadm \-\-create |
93e790af | 2111 | .I md-device |
7e23fc43 PS |
2112 | .BI \-\-chunk= X |
2113 | .BI \-\-level= Y | |
cd29a5c8 | 2114 | .br |
7e23fc43 | 2115 | .BI \-\-raid\-devices= Z |
e0fe762a | 2116 | .I devices |
cd29a5c8 NB |
2117 | |
2118 | .PP | |
2119 | This usage will initialise a new md array, associate some devices with | |
2120 | it, and activate the array. | |
2121 | ||
e0fe762a N |
2122 | The named device will normally not exist when |
2123 | .I "mdadm \-\-create" | |
2124 | is run, but will be created by | |
2125 | .I udev | |
2126 | once the array becomes active. | |
dd0781e5 | 2127 | |
e0fe762a N |
2128 | As devices are added, they are checked to see if they contain RAID |
2129 | superblocks or filesystems. They are also checked to see if the variance in | |
cd29a5c8 NB |
2130 | device size exceeds 1%. |
2131 | ||
2132 | If any discrepancy is found, the array will not automatically be run, though | |
2ae555c3 | 2133 | the presence of a |
7e23fc43 | 2134 | .B \-\-run |
cd29a5c8 NB |
2135 | can override this caution. |
2136 | ||
2d465520 | 2137 | To create a "degraded" array in which some devices are missing, simply |
d013a55e | 2138 | give the word "\fBmissing\fP" |
2d465520 | 2139 | in place of a device name. This will cause |
51ac42e3 | 2140 | .I mdadm |
2d465520 NB |
2141 | to leave the corresponding slot in the array empty. |
2142 | For a RAID4 or RAID5 array at most one slot can be | |
98c6faba | 2143 | "\fBmissing\fP"; for a RAID6 array at most two slots. |
2d465520 NB |
2144 | For a RAID1 array, only one real device needs to be given. All of the |
2145 | others can be | |
d013a55e | 2146 | "\fBmissing\fP". |
2d465520 | 2147 | |
feb716e9 | 2148 | When creating a RAID5 array, |
51ac42e3 | 2149 | .I mdadm |
feb716e9 | 2150 | will automatically create a degraded array with an extra spare drive. |
e0fe762a N |
2151 | This is because building the spare into a degraded array is in general |
2152 | faster than resyncing the parity on a non-degraded, but not clean, | |
2153 | array. This feature can be overridden with the | |
7e23fc43 | 2154 | .B \-\-force |
feb716e9 NB |
2155 | option. |
2156 | ||
0ee4da98 | 2157 | When creating an array with version-1 metadata a name for the array is |
41a3b72a NB |
2158 | required. |
2159 | If this is not given with the | |
7e23fc43 | 2160 | .B \-\-name |
41a3b72a NB |
2161 | option, |
2162 | .I mdadm | |
0ee4da98 | 2163 | will choose a name based on the last component of the name of the |
41a3b72a NB |
2164 | device being created. So if |
2165 | .B /dev/md3 | |
2166 | is being created, then the name | |
2167 | .B 3 | |
2168 | will be chosen. | |
2169 | If | |
2170 | .B /dev/md/home | |
2171 | is being created, then the name | |
2172 | .B home | |
2173 | will be used. | |
2174 | ||
e0fe762a N |
2175 | When creating a partition based array, using |
2176 | .I mdadm | |
2177 | with version-1.x metadata, the partition type should be set to | |
e0f31f50 | 2178 | .B 0xDA |
e0fe762a | 2179 | (non fs-data). This type selection allows for greater precision since |
e0f31f50 PC |
2180 | using any other [RAID auto-detect (0xFD) or a GNU/Linux partition (0x83)], |
2181 | might create problems in the event of array recovery through a live cdrom. | |
2182 | ||
3d3dd91e NB |
2183 | A new array will normally get a randomly assigned 128bit UUID which is |
2184 | very likely to be unique. If you have a specific need, you can choose | |
2185 | a UUID for the array by giving the | |
7e23fc43 | 2186 | .B \-\-uuid= |
3d3dd91e NB |
2187 | option. Be warned that creating two arrays with the same UUID is a |
2188 | recipe for disaster. Also, using | |
7e23fc43 | 2189 | .B \-\-uuid= |
3d3dd91e | 2190 | when creating a v0.90 array will silently override any |
7e23fc43 | 2191 | .B \-\-homehost= |
3d3dd91e | 2192 | setting. |
e43d0cda NB |
2193 | .\"If the |
2194 | .\".B \-\-size | |
2195 | .\"option is given, it is not necessary to list any component-devices in this command. | |
2196 | .\"They can be added later, before a | |
2197 | .\".B \-\-run. | |
2198 | .\"If no | |
2199 | .\".B \-\-size | |
2200 | .\"is given, the apparent size of the smallest drive given is used. | |
cd29a5c8 | 2201 | |
748952f7 N |
2202 | If the array type supports a write-intent bitmap, and if the devices |
2203 | in the array exceed 100G is size, an internal write-intent bitmap | |
2204 | will automatically be added unless some other option is explicitly | |
2205 | requested with the | |
2206 | .B \-\-bitmap | |
5308f117 AP |
2207 | option or a different consistency policy is selected with the |
2208 | .B \-\-consistency\-policy | |
2209 | option. In any case space for a bitmap will be reserved so that one | |
2210 | can be added later with | |
748952f7 N |
2211 | .BR "\-\-grow \-\-bitmap=internal" . |
2212 | ||
8fac4a54 TM |
2213 | If the metadata type supports it (currently only 1.x and IMSM metadata), |
2214 | space will be allocated to store a bad block list. This allows a modest | |
bf95d0f3 N |
2215 | number of bad blocks to be recorded, allowing the drive to remain in |
2216 | service while only partially functional. | |
2217 | ||
8fd8d9c4 N |
2218 | When creating an array within a |
2219 | .B CONTAINER | |
2220 | .I mdadm | |
2221 | can be given either the list of devices to use, or simply the name of | |
2222 | the container. The former case gives control over which devices in | |
2223 | the container will be used for the array. The latter case allows | |
2224 | .I mdadm | |
2225 | to automatically choose which devices to use based on how much spare | |
2226 | space is available. | |
2227 | ||
53e8b987 | 2228 | The General Management options that are valid with |
7e23fc43 | 2229 | .B \-\-create |
53e8b987 | 2230 | are: |
cd29a5c8 | 2231 | .TP |
7e23fc43 | 2232 | .B \-\-run |
dd0781e5 | 2233 | insist on running the array even if some devices look like they might |
cd29a5c8 NB |
2234 | be in use. |
2235 | ||
2236 | .TP | |
7e23fc43 | 2237 | .B \-\-readonly |
8a70632f | 2238 | start the array in readonly mode. |
52826846 | 2239 | |
e0d19036 | 2240 | .SH MANAGE MODE |
cd29a5c8 NB |
2241 | .HP 12 |
2242 | Usage: | |
e0d19036 NB |
2243 | .B mdadm |
2244 | .I device | |
2245 | .I options... devices... | |
cd29a5c8 NB |
2246 | .PP |
2247 | ||
e0d19036 NB |
2248 | This usage will allow individual devices in an array to be failed, |
2249 | removed or added. It is possible to perform multiple operations with | |
e0fe762a | 2250 | on command. For example: |
e0d19036 | 2251 | .br |
7e23fc43 | 2252 | .B " mdadm /dev/md0 \-f /dev/hda1 \-r /dev/hda1 \-a /dev/hda1" |
e0d19036 NB |
2253 | .br |
2254 | will firstly mark | |
2255 | .B /dev/hda1 | |
2256 | as faulty in | |
2257 | .B /dev/md0 | |
2258 | and will then remove it from the array and finally add it back | |
2d465520 | 2259 | in as a spare. However only one md array can be affected by a single |
2ae555c3 | 2260 | command. |
e0d19036 | 2261 | |
e0fe762a N |
2262 | When a device is added to an active array, mdadm checks to see if it |
2263 | has metadata on it which suggests that it was recently a member of the | |
a4e13010 | 2264 | array. If it does, it tries to "re\-add" the device. If there have |
e0fe762a N |
2265 | been no changes since the device was removed, or if the array has a |
2266 | write-intent bitmap which has recorded whatever changes there were, | |
2267 | then the device will immediately become a full member of the array and | |
2268 | those differences recorded in the bitmap will be resolved. | |
2269 | ||
e0d19036 NB |
2270 | .SH MISC MODE |
2271 | .HP 12 | |
2272 | Usage: | |
9a9dab36 | 2273 | .B mdadm |
e0d19036 | 2274 | .I options ... |
e0fe762a | 2275 | .I devices ... |
e0d19036 | 2276 | .PP |
cd29a5c8 | 2277 | |
b5e64645 | 2278 | MISC mode includes a number of distinct operations that |
e0d19036 NB |
2279 | operate on distinct devices. The operations are: |
2280 | .TP | |
962a108f | 2281 | .B \-\-query |
e0d19036 NB |
2282 | The device is examined to see if it is |
2283 | (1) an active md array, or | |
2284 | (2) a component of an md array. | |
2285 | The information discovered is reported. | |
2286 | ||
2287 | .TP | |
962a108f | 2288 | .B \-\-detail |
2d465520 | 2289 | The device should be an active md device. |
e0fe762a | 2290 | .B mdadm |
2d465520 | 2291 | will display a detailed description of the array. |
7e23fc43 | 2292 | .B \-\-brief |
2d465520 | 2293 | or |
7e23fc43 | 2294 | .B \-\-scan |
2d465520 | 2295 | will cause the output to be less detailed and the format to be |
e0d19036 | 2296 | suitable for inclusion in |
87eb4fab | 2297 | .BR mdadm.conf . |
feb716e9 NB |
2298 | The exit status of |
2299 | .I mdadm | |
2300 | will normally be 0 unless | |
2301 | .I mdadm | |
93e790af | 2302 | failed to get useful information about the device(s); however, if the |
7e23fc43 | 2303 | .B \-\-test |
feb716e9 NB |
2304 | option is given, then the exit status will be: |
2305 | .RS | |
2306 | .TP | |
2307 | 0 | |
2308 | The array is functioning normally. | |
2309 | .TP | |
2310 | 1 | |
2311 | The array has at least one failed device. | |
2312 | .TP | |
2313 | 2 | |
a77be586 | 2314 | The array has multiple failed devices such that it is unusable. |
feb716e9 NB |
2315 | .TP |
2316 | 4 | |
2317 | There was an error while trying to get information about the device. | |
2318 | .RE | |
cd29a5c8 | 2319 | |
4cce4069 DW |
2320 | .TP |
2321 | .B \-\-detail\-platform | |
e0fe762a | 2322 | Print detail of the platform's RAID capabilities (firmware / hardware |
4cce4069 DW |
2323 | topology). If the metadata is specified with |
2324 | .B \-e | |
2325 | or | |
2326 | .B \-\-metadata= | |
2327 | then the return status will be: | |
2328 | .RS | |
2329 | .TP | |
2330 | 0 | |
2331 | metadata successfully enumerated its platform components on this system | |
2332 | .TP | |
2333 | 1 | |
2334 | metadata is platform independent | |
2335 | .TP | |
2336 | 2 | |
2337 | metadata failed to find its platform components on this system | |
2338 | .RE | |
2339 | ||
aa534678 DW |
2340 | .TP |
2341 | .B \-\-update\-subarray= | |
2342 | If the device is a container and the argument to \-\-update\-subarray | |
2343 | specifies a subarray in the container, then attempt to update the given | |
2344 | superblock field in the subarray. Similar to updating an array in | |
2345 | "assemble" mode, the field to update is selected by | |
2346 | .B \-U | |
2347 | or | |
2348 | .B \-\-update= | |
e6e9dd3f AP |
2349 | option. The supported options are |
2350 | .BR name , | |
2351 | .B ppl | |
2352 | and | |
2353 | .BR no\-ppl . | |
aa534678 | 2354 | |
bcbb92d4 | 2355 | The |
aa534678 DW |
2356 | .B name |
2357 | option updates the subarray name in the metadata, it may not affect the | |
2358 | device node name or the device node symlink until the subarray is | |
bcbb92d4 | 2359 | re\-assembled. If updating |
aa534678 DW |
2360 | .B name |
2361 | would change the UUID of an active subarray this operation is blocked, | |
2362 | and the command will end in an error. | |
2363 | ||
e6e9dd3f AP |
2364 | The |
2365 | .B ppl | |
2366 | and | |
2367 | .B no\-ppl | |
2368 | options enable and disable PPL in the metadata. Currently supported only for | |
2369 | IMSM subarrays. | |
2370 | ||
e0d19036 | 2371 | .TP |
962a108f | 2372 | .B \-\-examine |
2d465520 | 2373 | The device should be a component of an md array. |
51ac42e3 | 2374 | .I mdadm |
2d465520 | 2375 | will read the md superblock of the device and display the contents. |
e0d19036 | 2376 | If |
7e23fc43 | 2377 | .B \-\-brief |
93e790af | 2378 | or |
7e23fc43 | 2379 | .B \-\-scan |
93e790af | 2380 | is given, then multiple devices that are components of the one array |
e0d19036 NB |
2381 | are grouped together and reported in a single entry suitable |
2382 | for inclusion in | |
87eb4fab | 2383 | .BR mdadm.conf . |
e0d19036 | 2384 | |
2d465520 | 2385 | Having |
7e23fc43 | 2386 | .B \-\-scan |
e0d19036 NB |
2387 | without listing any devices will cause all devices listed in the |
2388 | config file to be examined. | |
2389 | ||
74db60b0 N |
2390 | .TP |
2391 | .BI \-\-dump= directory | |
2392 | If the device contains RAID metadata, a file will be created in the | |
2393 | .I directory | |
2394 | and the metadata will be written to it. The file will be the same | |
2395 | size as the device and have the metadata written in the file at the | |
2396 | same locate that it exists in the device. However the file will be "sparse" so | |
2397 | that only those blocks containing metadata will be allocated. The | |
2398 | total space used will be small. | |
2399 | ||
2400 | The file name used in the | |
2401 | .I directory | |
2402 | will be the base name of the device. Further if any links appear in | |
2403 | .I /dev/disk/by-id | |
2404 | which point to the device, then hard links to the file will be created | |
2405 | in | |
2406 | .I directory | |
2407 | based on these | |
2408 | .I by-id | |
2409 | names. | |
2410 | ||
2411 | Multiple devices can be listed and their metadata will all be stored | |
2412 | in the one directory. | |
2413 | ||
2414 | .TP | |
2415 | .BI \-\-restore= directory | |
2416 | This is the reverse of | |
2417 | .BR \-\-dump . | |
2418 | .I mdadm | |
2419 | will locate a file in the directory that has a name appropriate for | |
2420 | the given device and will restore metadata from it. Names that match | |
2421 | .I /dev/disk/by-id | |
2422 | names are preferred, however if two of those refer to different files, | |
2423 | .I mdadm | |
2424 | will not choose between them but will abort the operation. | |
2425 | ||
2426 | If a file name is given instead of a | |
2427 | .I directory | |
2428 | then | |
2429 | .I mdadm | |
2430 | will restore from that file to a single device, always provided the | |
2431 | size of the file matches that of the device, and the file contains | |
2432 | valid metadata. | |
e0d19036 | 2433 | .TP |
962a108f | 2434 | .B \-\-stop |
98c6faba NB |
2435 | The devices should be active md arrays which will be deactivated, as |
2436 | long as they are not currently in use. | |
e0d19036 NB |
2437 | |
2438 | .TP | |
962a108f | 2439 | .B \-\-run |
e0d19036 NB |
2440 | This will fully activate a partially assembled md array. |
2441 | ||
2442 | .TP | |
962a108f | 2443 | .B \-\-readonly |
e0d19036 NB |
2444 | This will mark an active array as read-only, providing that it is |
2445 | not currently being used. | |
2446 | ||
2447 | .TP | |
962a108f | 2448 | .B \-\-readwrite |
e0d19036 NB |
2449 | This will change a |
2450 | .B readonly | |
2451 | array back to being read/write. | |
2452 | ||
2d465520 | 2453 | .TP |
962a108f | 2454 | .B \-\-scan |
2d465520 | 2455 | For all operations except |
7e23fc43 PS |
2456 | .BR \-\-examine , |
2457 | .B \-\-scan | |
2d465520 NB |
2458 | will cause the operation to be applied to all arrays listed in |
2459 | .BR /proc/mdstat . | |
2460 | For | |
7e23fc43 PS |
2461 | .BR \-\-examine, |
2462 | .B \-\-scan | |
2d465520 NB |
2463 | causes all devices listed in the config file to be examined. |
2464 | ||
a1331cc4 N |
2465 | .TP |
2466 | .BR \-b ", " \-\-brief | |
2467 | Be less verbose. This is used with | |
2468 | .B \-\-detail | |
2469 | and | |
2470 | .BR \-\-examine . | |
2471 | Using | |
2472 | .B \-\-brief | |
2473 | with | |
2474 | .B \-\-verbose | |
2475 | gives an intermediate level of verbosity. | |
2476 | ||
e0d19036 NB |
2477 | .SH MONITOR MODE |
2478 | ||
cd29a5c8 NB |
2479 | .HP 12 |
2480 | Usage: | |
7e23fc43 | 2481 | .B mdadm \-\-monitor |
e0d19036 NB |
2482 | .I options... devices... |
2483 | ||
cd29a5c8 | 2484 | .PP |
e0d19036 | 2485 | This usage causes |
51ac42e3 | 2486 | .I mdadm |
e0d19036 NB |
2487 | to periodically poll a number of md arrays and to report on any events |
2488 | noticed. | |
51ac42e3 | 2489 | .I mdadm |
e0d19036 NB |
2490 | will never exit once it decides that there are arrays to be checked, |
2491 | so it should normally be run in the background. | |
2492 | ||
2d465520 | 2493 | As well as reporting events, |
51ac42e3 | 2494 | .I mdadm |
2d465520 NB |
2495 | may move a spare drive from one array to another if they are in the |
2496 | same | |
2497 | .B spare-group | |
210597d1 PC |
2498 | or |
2499 | .B domain | |
a9d69660 | 2500 | and if the destination array has a failed drive but no spares. |
2d465520 | 2501 | |
e0d19036 | 2502 | If any devices are listed on the command line, |
51ac42e3 | 2503 | .I mdadm |
e0fe762a | 2504 | will only monitor those devices. Otherwise all arrays listed in the |
e0d19036 | 2505 | configuration file will be monitored. Further, if |
7e23fc43 | 2506 | .B \-\-scan |
e0d19036 NB |
2507 | is given, then any other md devices that appear in |
2508 | .B /proc/mdstat | |
2509 | will also be monitored. | |
2510 | ||
2511 | The result of monitoring the arrays is the generation of events. | |
bd526cee | 2512 | These events are passed to a separate program (if specified) and may |
2d465520 | 2513 | be mailed to a given E-mail address. |
e0d19036 | 2514 | |
93e790af SW |
2515 | When passing events to a program, the program is run once for each event, |
2516 | and is given 2 or 3 command-line arguments: the first is the | |
2517 | name of the event (see below), the second is the name of the | |
bd526cee | 2518 | md device which is affected, and the third is the name of a related |
93e790af | 2519 | device if relevant (such as a component device that has failed). |
cd29a5c8 NB |
2520 | |
2521 | If | |
7e23fc43 | 2522 | .B \-\-scan |
e0d19036 NB |
2523 | is given, then a program or an E-mail address must be specified on the |
2524 | command line or in the config file. If neither are available, then | |
51ac42e3 | 2525 | .I mdadm |
e0d19036 NB |
2526 | will not monitor anything. |
2527 | Without | |
93e790af | 2528 | .B \-\-scan, |
51ac42e3 | 2529 | .I mdadm |
2d465520 | 2530 | will continue monitoring as long as something was found to monitor. If |
e0d19036 NB |
2531 | no program or email is given, then each event is reported to |
2532 | .BR stdout . | |
cd29a5c8 | 2533 | |
e0d19036 NB |
2534 | The different events are: |
2535 | ||
2536 | .RS 4 | |
2537 | .TP | |
2538 | .B DeviceDisappeared | |
2d465520 | 2539 | An md array which previously was configured appears to no longer be |
773135f5 | 2540 | configured. (syslog priority: Critical) |
e0d19036 | 2541 | |
b8f72a62 NB |
2542 | If |
2543 | .I mdadm | |
2544 | was told to monitor an array which is RAID0 or Linear, then it will | |
2545 | report | |
2546 | .B DeviceDisappeared | |
2547 | with the extra information | |
2548 | .BR Wrong-Level . | |
2549 | This is because RAID0 and Linear do not support the device-failed, | |
2550 | hot-spare and resync operations which are monitored. | |
2551 | ||
e0d19036 NB |
2552 | .TP |
2553 | .B RebuildStarted | |
2ca20929 JC |
2554 | An md array started reconstruction (e.g. recovery, resync, reshape, |
2555 | check, repair). (syslog priority: Warning) | |
e0d19036 NB |
2556 | |
2557 | .TP | |
2558 | .BI Rebuild NN | |
2559 | Where | |
2560 | .I NN | |
9a36a9b7 ZB |
2561 | is a two-digit number (ie. 05, 48). This indicates that rebuild |
2562 | has passed that many percent of the total. The events are generated | |
2563 | with fixed increment since 0. Increment size may be specified with | |
2564 | a commandline option (default is 20). (syslog priority: Warning) | |
e0d19036 | 2565 | |
98c6faba NB |
2566 | .TP |
2567 | .B RebuildFinished | |
2568 | An md array that was rebuilding, isn't any more, either because it | |
773135f5 | 2569 | finished normally or was aborted. (syslog priority: Warning) |
98c6faba | 2570 | |
e0d19036 NB |
2571 | .TP |
2572 | .B Fail | |
773135f5 NB |
2573 | An active component device of an array has been marked as |
2574 | faulty. (syslog priority: Critical) | |
e0d19036 NB |
2575 | |
2576 | .TP | |
2577 | .B FailSpare | |
2578 | A spare component device which was being rebuilt to replace a faulty | |
93e790af | 2579 | device has failed. (syslog priority: Critical) |
e0d19036 NB |
2580 | |
2581 | .TP | |
2582 | .B SpareActive | |
2583 | A spare component device which was being rebuilt to replace a faulty | |
98b24a2a | 2584 | device has been successfully rebuilt and has been made active. |
773135f5 | 2585 | (syslog priority: Info) |
e0d19036 NB |
2586 | |
2587 | .TP | |
2588 | .B NewArray | |
2589 | A new md array has been detected in the | |
2590 | .B /proc/mdstat | |
e0fe762a | 2591 | file. (syslog priority: Info) |
e0d19036 | 2592 | |
aa88f531 NB |
2593 | .TP |
2594 | .B DegradedArray | |
2595 | A newly noticed array appears to be degraded. This message is not | |
2596 | generated when | |
2597 | .I mdadm | |
2598 | notices a drive failure which causes degradation, but only when | |
2599 | .I mdadm | |
2600 | notices that an array is degraded when it first sees the array. | |
93e790af | 2601 | (syslog priority: Critical) |
aa88f531 | 2602 | |
e0d19036 NB |
2603 | .TP |
2604 | .B MoveSpare | |
2605 | A spare drive has been moved from one array in a | |
2606 | .B spare-group | |
210597d1 PC |
2607 | or |
2608 | .B domain | |
e0d19036 | 2609 | to another to allow a failed drive to be replaced. |
773135f5 | 2610 | (syslog priority: Info) |
e0d19036 | 2611 | |
b8f72a62 NB |
2612 | .TP |
2613 | .B SparesMissing | |
2614 | If | |
2615 | .I mdadm | |
2616 | has been told, via the config file, that an array should have a certain | |
2617 | number of spare devices, and | |
2618 | .I mdadm | |
93e790af | 2619 | detects that it has fewer than this number when it first sees the |
b8f72a62 NB |
2620 | array, it will report a |
2621 | .B SparesMissing | |
2622 | message. | |
d1732eeb | 2623 | (syslog priority: Warning) |
b8f72a62 | 2624 | |
98c6faba NB |
2625 | .TP |
2626 | .B TestMessage | |
2627 | An array was found at startup, and the | |
7e23fc43 | 2628 | .B \-\-test |
98c6faba | 2629 | flag was given. |
773135f5 | 2630 | (syslog priority: Info) |
e0d19036 NB |
2631 | .RE |
2632 | ||
2633 | Only | |
93e790af SW |
2634 | .B Fail, |
2635 | .B FailSpare, | |
2636 | .B DegradedArray, | |
2637 | .B SparesMissing | |
e0d19036 | 2638 | and |
98c6faba | 2639 | .B TestMessage |
e0d19036 | 2640 | cause Email to be sent. All events cause the program to be run. |
93e790af | 2641 | The program is run with two or three arguments: the event |
e0d19036 NB |
2642 | name, the array device and possibly a second device. |
2643 | ||
2644 | Each event has an associated array device (e.g. | |
2645 | .BR /dev/md1 ) | |
2646 | and possibly a second device. For | |
2647 | .BR Fail , | |
2648 | .BR FailSpare , | |
2649 | and | |
2650 | .B SpareActive | |
2651 | the second device is the relevant component device. | |
2652 | For | |
2653 | .B MoveSpare | |
2654 | the second device is the array that the spare was moved from. | |
2655 | ||
2656 | For | |
51ac42e3 | 2657 | .I mdadm |
e0d19036 | 2658 | to move spares from one array to another, the different arrays need to |
93e790af | 2659 | be labeled with the same |
e0d19036 | 2660 | .B spare-group |
210597d1 | 2661 | or the spares must be allowed to migrate through matching POLICY domains |
e0d19036 NB |
2662 | in the configuration file. The |
2663 | .B spare-group | |
93e790af | 2664 | name can be any string; it is only necessary that different spare |
2d465520 | 2665 | groups use different names. |
e0d19036 NB |
2666 | |
2667 | When | |
51ac42e3 | 2668 | .I mdadm |
93e790af | 2669 | detects that an array in a spare group has fewer active |
e0d19036 NB |
2670 | devices than necessary for the complete array, and has no spare |
2671 | devices, it will look for another array in the same spare group that | |
2672 | has a full complement of working drive and a spare. It will then | |
2673 | attempt to remove the spare from the second drive and add it to the | |
2674 | first. | |
2675 | If the removal succeeds but the adding fails, then it is added back to | |
2676 | the original array. | |
2677 | ||
210597d1 PC |
2678 | If the spare group for a degraded array is not defined, |
2679 | .I mdadm | |
2680 | will look at the rules of spare migration specified by POLICY lines in | |
87eb4fab | 2681 | .B mdadm.conf |
210597d1 PC |
2682 | and then follow similar steps as above if a matching spare is found. |
2683 | ||
dd0781e5 NB |
2684 | .SH GROW MODE |
2685 | The GROW mode is used for changing the size or shape of an active | |
2686 | array. | |
2687 | For this to work, the kernel must support the necessary change. | |
c64881d7 | 2688 | Various types of growth are being added during 2.6 development. |
dd0781e5 | 2689 | |
c64881d7 | 2690 | Currently the supported changes include |
dfd4d8ee | 2691 | .IP \(bu 4 |
c64881d7 | 2692 | change the "size" attribute for RAID1, RAID4, RAID5 and RAID6. |
dfd4d8ee | 2693 | .IP \(bu 4 |
c64881d7 N |
2694 | increase or decrease the "raid\-devices" attribute of RAID0, RAID1, RAID4, |
2695 | RAID5, and RAID6. | |
cb77f620 | 2696 | .IP \(bu 4 |
17790db6 | 2697 | change the chunk-size and layout of RAID0, RAID4, RAID5, RAID6 and RAID10. |
cb77f620 | 2698 | .IP \(bu 4 |
c64881d7 | 2699 | convert between RAID1 and RAID5, between RAID5 and RAID6, between |
cb77f620 | 2700 | RAID0, RAID4, and RAID5, and between RAID0 and RAID10 (in the near-2 mode). |
dfd4d8ee | 2701 | .IP \(bu 4 |
93e790af | 2702 | add a write-intent bitmap to any array which supports these bitmaps, or |
2ae555c3 | 2703 | remove a write-intent bitmap from such an array. |
860f11ed AP |
2704 | .IP \(bu 4 |
2705 | change the array's consistency policy. | |
dfd4d8ee | 2706 | .PP |
dd0781e5 | 2707 | |
9ab6e80a | 2708 | Using GROW on containers is currently supported only for Intel's IMSM |
c64881d7 N |
2709 | container format. The number of devices in a container can be |
2710 | increased - which affects all arrays in the container - or an array | |
2711 | in a container can be converted between levels where those levels are | |
2712 | supported by the container, and the conversion is on of those listed | |
9ab6e80a N |
2713 | above. Resizing arrays in an IMSM container with |
2714 | .B "--grow --size" | |
2715 | is not yet supported. | |
8fd8d9c4 | 2716 | |
ca24ddb0 AK |
2717 | Grow functionality (e.g. expand a number of raid devices) for Intel's |
2718 | IMSM container format has an experimental status. It is guarded by the | |
2719 | .B MDADM_EXPERIMENTAL | |
2720 | environment variable which must be set to '1' for a GROW command to | |
2721 | succeed. | |
2722 | This is for the following reasons: | |
2723 | ||
2724 | .IP 1. | |
0de8d44d AK |
2725 | Intel's native IMSM check-pointing is not fully tested yet. |
2726 | This can causes IMSM incompatibility during the grow process: an array | |
ca24ddb0 AK |
2727 | which is growing cannot roam between Microsoft Windows(R) and Linux |
2728 | systems. | |
2729 | ||
2730 | .IP 2. | |
2731 | Interrupting a grow operation is not recommended, because it | |
2732 | has not been fully tested for Intel's IMSM container format yet. | |
2733 | ||
0de8d44d AK |
2734 | .PP |
2735 | Note: Intel's native checkpointing doesn't use | |
2736 | .B --backup-file | |
2737 | option and it is transparent for assembly feature. | |
2738 | ||
2ae555c3 | 2739 | .SS SIZE CHANGES |
c64881d7 | 2740 | Normally when an array is built the "size" is taken from the smallest |
dd0781e5 NB |
2741 | of the drives. If all the small drives in an arrays are, one at a |
2742 | time, removed and replaced with larger drives, then you could have an | |
2743 | array of large drives with only a small amount used. In this | |
2744 | situation, changing the "size" with "GROW" mode will allow the extra | |
2745 | space to start being used. If the size is increased in this way, a | |
2746 | "resync" process will start to make sure the new parts of the array | |
2747 | are synchronised. | |
2748 | ||
2749 | Note that when an array changes size, any filesystem that may be | |
cb77f620 | 2750 | stored in the array will not automatically grow or shrink to use or |
88b496c2 | 2751 | vacate the space. The |
666bba9b N |
2752 | filesystem will need to be explicitly told to use the extra space |
2753 | after growing, or to reduce its size | |
2754 | .B prior | |
2755 | to shrinking the array. | |
dd0781e5 | 2756 | |
e0fe762a N |
2757 | Also the size of an array cannot be changed while it has an active |
2758 | bitmap. If an array has a bitmap, it must be removed before the size | |
cb77f620 | 2759 | can be changed. Once the change is complete a new bitmap can be created. |
e0fe762a | 2760 | |
7fa9af4c ZL |
2761 | .PP |
2762 | Note: | |
2763 | .B "--grow --size" | |
2764 | is not yet supported for external file bitmap. | |
2765 | ||
e0fe762a | 2766 | .SS RAID\-DEVICES CHANGES |
2ae555c3 | 2767 | |
dd0781e5 NB |
2768 | A RAID1 array can work with any number of devices from 1 upwards |
2769 | (though 1 is not very useful). There may be times which you want to | |
2770 | increase or decrease the number of active devices. Note that this is | |
2771 | different to hot-add or hot-remove which changes the number of | |
2772 | inactive devices. | |
2773 | ||
2774 | When reducing the number of devices in a RAID1 array, the slots which | |
2775 | are to be removed from the array must already be vacant. That is, the | |
93e790af | 2776 | devices which were in those slots must be failed and removed. |
dd0781e5 NB |
2777 | |
2778 | When the number of devices is increased, any hot spares that are | |
a9d69660 | 2779 | present will be activated immediately. |
dd0781e5 | 2780 | |
f24e2d6c | 2781 | Changing the number of active devices in a RAID5 or RAID6 is much more |
2ae555c3 | 2782 | effort. Every block in the array will need to be read and written |
f24e2d6c | 2783 | back to a new location. From 2.6.17, the Linux Kernel is able to |
ca4f89a3 N |
2784 | increase the number of devices in a RAID5 safely, including restarting |
2785 | an interrupted "reshape". From 2.6.31, the Linux Kernel is able to | |
f24e2d6c N |
2786 | increase or decrease the number of devices in a RAID5 or RAID6. |
2787 | ||
c64881d7 N |
2788 | From 2.6.35, the Linux Kernel is able to convert a RAID0 in to a RAID4 |
2789 | or RAID5. | |
2790 | .I mdadm | |
2791 | uses this functionality and the ability to add | |
2792 | devices to a RAID4 to allow devices to be added to a RAID0. When | |
2793 | requested to do this, | |
2794 | .I mdadm | |
2795 | will convert the RAID0 to a RAID4, add the necessary disks and make | |
2796 | the reshape happen, and then convert the RAID4 back to RAID0. | |
2797 | ||
f24e2d6c N |
2798 | When decreasing the number of devices, the size of the array will also |
2799 | decrease. If there was data in the array, it could get destroyed and | |
666bba9b N |
2800 | this is not reversible, so you should firstly shrink the filesystem on |
2801 | the array to fit within the new size. To help prevent accidents, | |
f24e2d6c N |
2802 | .I mdadm |
2803 | requires that the size of the array be decreased first with | |
2804 | .BR "mdadm --grow --array-size" . | |
2805 | This is a reversible change which simply makes the end of the array | |
2806 | inaccessible. The integrity of any data can then be checked before | |
2807 | the non-reversible reduction in the number of devices is request. | |
2ae555c3 | 2808 | |
cd19c0cf JR |
2809 | When relocating the first few stripes on a RAID5 or RAID6, it is not |
2810 | possible to keep the data on disk completely consistent and | |
2811 | crash-proof. To provide the required safety, mdadm disables writes to | |
2812 | the array while this "critical section" is reshaped, and takes a | |
2813 | backup of the data that is in that section. For grows, this backup may be | |
2814 | stored in any spare devices that the array has, however it can also be | |
2815 | stored in a separate file specified with the | |
7e23fc43 | 2816 | .B \-\-backup\-file |
cd19c0cf JR |
2817 | option, and is required to be specified for shrinks, RAID level |
2818 | changes and layout changes. If this option is used, and the system | |
2819 | does crash during the critical period, the same file must be passed to | |
7e23fc43 | 2820 | .B \-\-assemble |
cd19c0cf JR |
2821 | to restore the backup and reassemble the array. When shrinking rather |
2822 | than growing the array, the reshape is done from the end towards the | |
2823 | beginning, so the "critical section" is at the end of the reshape. | |
2ae555c3 | 2824 | |
f24e2d6c N |
2825 | .SS LEVEL CHANGES |
2826 | ||
2827 | Changing the RAID level of any array happens instantaneously. However | |
cd19c0cf | 2828 | in the RAID5 to RAID6 case this requires a non-standard layout of the |
f24e2d6c | 2829 | RAID6 data, and in the RAID6 to RAID5 case that non-standard layout is |
cd19c0cf | 2830 | required before the change can be accomplished. So while the level |
f24e2d6c | 2831 | change is instant, the accompanying layout change can take quite a |
cd19c0cf JR |
2832 | long time. A |
2833 | .B \-\-backup\-file | |
2834 | is required. If the array is not simultaneously being grown or | |
2835 | shrunk, so that the array size will remain the same - for example, | |
2836 | reshaping a 3-drive RAID5 into a 4-drive RAID6 - the backup file will | |
2837 | be used not just for a "cricital section" but throughout the reshape | |
2838 | operation, as described below under LAYOUT CHANGES. | |
f24e2d6c N |
2839 | |
2840 | .SS CHUNK-SIZE AND LAYOUT CHANGES | |
2841 | ||
2842 | Changing the chunk-size of layout without also changing the number of | |
2843 | devices as the same time will involve re-writing all blocks in-place. | |
2844 | To ensure against data loss in the case of a crash, a | |
2845 | .B --backup-file | |
2846 | must be provided for these changes. Small sections of the array will | |
cd19c0cf JR |
2847 | be copied to the backup file while they are being rearranged. This |
2848 | means that all the data is copied twice, once to the backup and once | |
2849 | to the new layout on the array, so this type of reshape will go very | |
2850 | slowly. | |
f24e2d6c N |
2851 | |
2852 | If the reshape is interrupted for any reason, this backup file must be | |
cd19c0cf | 2853 | made available to |
f24e2d6c N |
2854 | .B "mdadm --assemble" |
2855 | so the array can be reassembled. Consequently the file cannot be | |
2856 | stored on the device being reshaped. | |
2857 | ||
2858 | ||
2ae555c3 NB |
2859 | .SS BITMAP CHANGES |
2860 | ||
2861 | A write-intent bitmap can be added to, or removed from, an active | |
93e790af | 2862 | array. Either internal bitmaps, or bitmaps stored in a separate file, |
fe80f49b | 2863 | can be added. Note that if you add a bitmap stored in a file which is |
e0fe762a | 2864 | in a filesystem that is on the RAID array being affected, the system |
fe80f49b NB |
2865 | will deadlock. The bitmap must be on a separate filesystem. |
2866 | ||
860f11ed AP |
2867 | .SS CONSISTENCY POLICY CHANGES |
2868 | ||
2869 | The consistency policy of an active array can be changed by using the | |
2870 | .B \-\-consistency\-policy | |
2871 | option in Grow mode. Currently this works only for the | |
2872 | .B ppl | |
2873 | and | |
2874 | .B resync | |
2875 | policies and allows to enable or disable the RAID5 Partial Parity Log (PPL). | |
2876 | ||
8382f19b NB |
2877 | .SH INCREMENTAL MODE |
2878 | ||
2879 | .HP 12 | |
2880 | Usage: | |
7e23fc43 PS |
2881 | .B mdadm \-\-incremental |
2882 | .RB [ \-\-run ] | |
2883 | .RB [ \-\-quiet ] | |
8382f19b | 2884 | .I component-device |
b11fe74d | 2885 | .RI [ optional-aliases-for-device ] |
8382f19b NB |
2886 | .HP 12 |
2887 | Usage: | |
29ba4804 N |
2888 | .B mdadm \-\-incremental \-\-fail |
2889 | .I component-device | |
2890 | .HP 12 | |
2891 | Usage: | |
7e6140e6 | 2892 | .B mdadm \-\-incremental \-\-rebuild\-map |
8382f19b NB |
2893 | .HP 12 |
2894 | Usage: | |
7e23fc43 | 2895 | .B mdadm \-\-incremental \-\-run \-\-scan |
8382f19b | 2896 | |
8382f19b NB |
2897 | .PP |
2898 | This mode is designed to be used in conjunction with a device | |
2899 | discovery system. As devices are found in a system, they can be | |
2900 | passed to | |
7e23fc43 | 2901 | .B "mdadm \-\-incremental" |
8382f19b NB |
2902 | to be conditionally added to an appropriate array. |
2903 | ||
29ba4804 N |
2904 | Conversely, it can also be used with the |
2905 | .B \-\-fail | |
2906 | flag to do just the opposite and find whatever array a particular device | |
2907 | is part of and remove the device from that array. | |
2908 | ||
8fd8d9c4 N |
2909 | If the device passed is a |
2910 | .B CONTAINER | |
2911 | device created by a previous call to | |
2912 | .IR mdadm , | |
2913 | then rather than trying to add that device to an array, all the arrays | |
2914 | described by the metadata of the container will be started. | |
2915 | ||
8382f19b NB |
2916 | .I mdadm |
2917 | performs a number of tests to determine if the device is part of an | |
93e790af | 2918 | array, and which array it should be part of. If an appropriate array |
8382f19b NB |
2919 | is found, or can be created, |
2920 | .I mdadm | |
2921 | adds the device to the array and conditionally starts the array. | |
2922 | ||
2923 | Note that | |
2924 | .I mdadm | |
87eb4fab N |
2925 | will normally only add devices to an array which were previously working |
2926 | (active or spare) parts of that array. The support for automatic | |
210597d1 PC |
2927 | inclusion of a new drive as a spare in some array requires |
2928 | a configuration through POLICY in config file. | |
8382f19b | 2929 | |
8382f19b NB |
2930 | The tests that |
2931 | .I mdadm | |
2932 | makes are as follow: | |
2933 | .IP + | |
2934 | Is the device permitted by | |
2935 | .BR mdadm.conf ? | |
2936 | That is, is it listed in a | |
2937 | .B DEVICES | |
2938 | line in that file. If | |
2939 | .B DEVICES | |
b11fe74d | 2940 | is absent then the default it to allow any device. Similarly if |
8382f19b NB |
2941 | .B DEVICES |
2942 | contains the special word | |
2943 | .B partitions | |
2944 | then any device is allowed. Otherwise the device name given to | |
b11fe74d N |
2945 | .IR mdadm , |
2946 | or one of the aliases given, or an alias found in the filesystem, | |
8382f19b NB |
2947 | must match one of the names or patterns in a |
2948 | .B DEVICES | |
2949 | line. | |
2950 | ||
b11fe74d N |
2951 | This is the only context where the aliases are used. They are |
2952 | usually provided by a | |
2953 | .I udev | |
2954 | rules mentioning | |
ceb5f8ef | 2955 | .BR $env{DEVLINKS} . |
b11fe74d | 2956 | |
8382f19b | 2957 | .IP + |
cb77f620 NK |
2958 | Does the device have a valid md superblock? If a specific metadata |
2959 | version is requested with | |
7e23fc43 | 2960 | .B \-\-metadata |
8382f19b | 2961 | or |
7e23fc43 | 2962 | .B \-e |
8382f19b NB |
2963 | then only that style of metadata is accepted, otherwise |
2964 | .I mdadm | |
2965 | finds any known version of metadata. If no | |
2966 | .I md | |
210597d1 PC |
2967 | metadata is found, the device may be still added to an array |
2968 | as a spare if POLICY allows. | |
8382f19b | 2969 | |
d1302dd8 | 2970 | .ig |
8382f19b NB |
2971 | .IP + |
2972 | Does the metadata match an expected array? | |
2973 | The metadata can match in two ways. Either there is an array listed | |
2974 | in | |
2975 | .B mdadm.conf | |
2976 | which identifies the array (either by UUID, by name, by device list, | |
93e790af | 2977 | or by minor-number), or the array was created with a |
8382f19b | 2978 | .B homehost |
93e790af | 2979 | specified and that |
8382f19b | 2980 | .B homehost |
93e790af | 2981 | matches the one in |
8382f19b NB |
2982 | .B mdadm.conf |
2983 | or on the command line. | |
2984 | If | |
2985 | .I mdadm | |
2986 | is not able to positively identify the array as belonging to the | |
2987 | current host, the device will be rejected. | |
d1302dd8 | 2988 | .. |
8382f19b | 2989 | |
cb77f620 | 2990 | .PP |
8382f19b | 2991 | .I mdadm |
93e790af | 2992 | keeps a list of arrays that it has partially assembled in |
96fd06ed | 2993 | .BR {MAP_PATH} . |
e0fe762a | 2994 | If no array exists which matches |
8382f19b NB |
2995 | the metadata on the new device, |
2996 | .I mdadm | |
2997 | must choose a device name and unit number. It does this based on any | |
2998 | name given in | |
2999 | .B mdadm.conf | |
3000 | or any name information stored in the metadata. If this name | |
3001 | suggests a unit number, that number will be used, otherwise a free | |
3002 | unit number will be chosen. Normally | |
3003 | .I mdadm | |
3004 | will prefer to create a partitionable array, however if the | |
3005 | .B CREATE | |
3006 | line in | |
3007 | .B mdadm.conf | |
3008 | suggests that a non-partitionable array is preferred, that will be | |
3009 | honoured. | |
3010 | ||
e0fe762a N |
3011 | If the array is not found in the config file and its metadata does not |
3012 | identify it as belonging to the "homehost", then | |
3013 | .I mdadm | |
3014 | will choose a name for the array which is certain not to conflict with | |
3015 | any array which does belong to this host. It does this be adding an | |
3016 | underscore and a small number to the name preferred by the metadata. | |
3017 | ||
8382f19b NB |
3018 | Once an appropriate array is found or created and the device is added, |
3019 | .I mdadm | |
3020 | must decide if the array is ready to be started. It will | |
3021 | normally compare the number of available (non-spare) devices to the | |
3022 | number of devices that the metadata suggests need to be active. If | |
3023 | there are at least that many, the array will be started. This means | |
3024 | that if any devices are missing the array will not be restarted. | |
3025 | ||
3026 | As an alternative, | |
7e23fc43 | 3027 | .B \-\-run |
8382f19b | 3028 | may be passed to |
51ac42e3 | 3029 | .I mdadm |
8382f19b | 3030 | in which case the array will be run as soon as there are enough |
e0fe762a N |
3031 | devices present for the data to be accessible. For a RAID1, that |
3032 | means one device will start the array. For a clean RAID5, the array | |
8382f19b NB |
3033 | will be started as soon as all but one drive is present. |
3034 | ||
93e790af | 3035 | Note that neither of these approaches is really ideal. If it can |
8382f19b NB |
3036 | be known that all device discovery has completed, then |
3037 | .br | |
7e23fc43 | 3038 | .B " mdadm \-IRs" |
8382f19b NB |
3039 | .br |
3040 | can be run which will try to start all arrays that are being | |
3041 | incrementally assembled. They are started in "read-auto" mode in | |
3042 | which they are read-only until the first write request. This means | |
3043 | that no metadata updates are made and no attempt at resync or recovery | |
3044 | happens. Further devices that are found before the first write can | |
3045 | still be added safely. | |
3046 | ||
5545fa6d DW |
3047 | .SH ENVIRONMENT |
3048 | This section describes environment variables that affect how mdadm | |
3049 | operates. | |
3050 | ||
3051 | .TP | |
3052 | .B MDADM_NO_MDMON | |
3053 | Setting this value to 1 will prevent mdadm from automatically launching | |
3054 | mdmon. This variable is intended primarily for debugging mdadm/mdmon. | |
3055 | ||
8fd8d9c4 N |
3056 | .TP |
3057 | .B MDADM_NO_UDEV | |
3058 | Normally, | |
3059 | .I mdadm | |
3060 | does not create any device nodes in /dev, but leaves that task to | |
3061 | .IR udev . | |
3062 | If | |
3063 | .I udev | |
3064 | appears not to be configured, or if this environment variable is set | |
3065 | to '1', the | |
3066 | .I mdadm | |
3067 | will create and devices that are needed. | |
3068 | ||
f66585eb N |
3069 | .TP |
3070 | .B MDADM_NO_SYSTEMCTL | |
3071 | If | |
3072 | .I mdadm | |
3073 | detects that | |
3074 | .I systemd | |
3075 | is in use it will normally request | |
3076 | .I systemd | |
3077 | to start various background tasks (particularly | |
3078 | .IR mdmon ) | |
3079 | rather than forking and running them in the background. This can be | |
3080 | suppressed by setting | |
3081 | .BR MDADM_NO_SYSTEMCTL=1 . | |
3082 | ||
401f095c N |
3083 | .TP |
3084 | .B IMSM_NO_PLATFORM | |
3085 | A key value of IMSM metadata is that it allows interoperability with | |
3086 | boot ROMs on Intel platforms, and with other major operating systems. | |
3087 | Consequently, | |
3088 | .I mdadm | |
3089 | will only allow an IMSM array to be created or modified if detects | |
3090 | that it is running on an Intel platform which supports IMSM, and | |
3091 | supports the particular configuration of IMSM that is being requested | |
3092 | (some functionality requires newer OROM support). | |
3093 | ||
3094 | These checks can be suppressed by setting IMSM_NO_PLATFORM=1 in the | |
3095 | environment. This can be useful for testing or for disaster | |
3096 | recovery. You should be aware that interoperability may be | |
3097 | compromised by setting this value. | |
2dfb675b | 3098 | |
f66585eb N |
3099 | .TP |
3100 | .B MDADM_GROW_ALLOW_OLD | |
3101 | If an array is stopped while it is performing a reshape and that | |
3102 | reshape was making use of a backup file, then when the array is | |
3103 | re-assembled | |
3104 | .I mdadm | |
3105 | will sometimes complain that the backup file is too old. If this | |
3106 | happens and you are certain it is the right backup file, you can | |
3107 | over-ride this check by setting | |
3108 | .B MDADM_GROW_ALLOW_OLD=1 | |
3109 | in the environment. | |
3110 | ||
2dfb675b N |
3111 | .TP |
3112 | .B MDADM_CONF_AUTO | |
3113 | Any string given in this variable is added to the start of the | |
3114 | .B AUTO | |
3115 | line in the config file, or treated as the whole | |
3116 | .B AUTO | |
3117 | line if none is given. It can be used to disable certain metadata | |
3118 | types when | |
3119 | .I mdadm | |
3120 | is called from a boot script. For example | |
3121 | .br | |
3122 | .B " export MDADM_CONF_AUTO='-ddf -imsm' | |
3123 | .br | |
3124 | will make sure that | |
3125 | .I mdadm | |
3126 | does not automatically assemble any DDF or | |
3127 | IMSM arrays that are found. This can be useful on systems configured | |
3128 | to manage such arrays with | |
3129 | .BR dmraid . | |
3130 | ||
3131 | ||
2d465520 NB |
3132 | .SH EXAMPLES |
3133 | ||
7e23fc43 | 3134 | .B " mdadm \-\-query /dev/name-of-device" |
2d465520 | 3135 | .br |
e0fe762a | 3136 | This will find out if a given device is a RAID array, or is part of |
5787fa49 | 3137 | one, and will provide brief information about the device. |
2d465520 | 3138 | |
7e23fc43 | 3139 | .B " mdadm \-\-assemble \-\-scan" |
2d465520 | 3140 | .br |
93e790af | 3141 | This will assemble and start all arrays listed in the standard config |
5787fa49 | 3142 | file. This command will typically go in a system startup file. |
2d465520 | 3143 | |
7e23fc43 | 3144 | .B " mdadm \-\-stop \-\-scan" |
5787fa49 | 3145 | .br |
93e790af | 3146 | This will shut down all arrays that can be shut down (i.e. are not |
19f8b8fc | 3147 | currently in use). This will typically go in a system shutdown script. |
2d465520 | 3148 | |
7e23fc43 | 3149 | .B " mdadm \-\-follow \-\-scan \-\-delay=120" |
2d465520 | 3150 | .br |
5787fa49 NB |
3151 | If (and only if) there is an Email address or program given in the |
3152 | standard config file, then | |
3153 | monitor the status of all arrays listed in that file by | |
3154 | polling them ever 2 minutes. | |
2d465520 | 3155 | |
7e23fc43 | 3156 | .B " mdadm \-\-create /dev/md0 \-\-level=1 \-\-raid\-devices=2 /dev/hd[ac]1" |
2d465520 | 3157 | .br |
5787fa49 | 3158 | Create /dev/md0 as a RAID1 array consisting of /dev/hda1 and /dev/hdc1. |
2d465520 | 3159 | |
2d465520 | 3160 | .br |
7e23fc43 | 3161 | .B " echo 'DEVICE /dev/hd*[0\-9] /dev/sd*[0\-9]' > mdadm.conf" |
2d465520 | 3162 | .br |
7e23fc43 | 3163 | .B " mdadm \-\-detail \-\-scan >> mdadm.conf" |
2d465520 | 3164 | .br |
5787fa49 NB |
3165 | This will create a prototype config file that describes currently |
3166 | active arrays that are known to be made from partitions of IDE or SCSI drives. | |
2d465520 NB |
3167 | This file should be reviewed before being used as it may |
3168 | contain unwanted detail. | |
3169 | ||
7e23fc43 | 3170 | .B " echo 'DEVICE /dev/hd[a\-z] /dev/sd*[a\-z]' > mdadm.conf" |
2d465520 | 3171 | .br |
7e23fc43 | 3172 | .B " mdadm \-\-examine \-\-scan \-\-config=mdadm.conf >> mdadm.conf" |
93e790af SW |
3173 | .br |
3174 | This will find arrays which could be assembled from existing IDE and | |
3175 | SCSI whole drives (not partitions), and store the information in the | |
5787fa49 | 3176 | format of a config file. |
2d465520 NB |
3177 | This file is very likely to contain unwanted detail, particularly |
3178 | the | |
3179 | .B devices= | |
5787fa49 NB |
3180 | entries. It should be reviewed and edited before being used as an |
3181 | actual config file. | |
2d465520 | 3182 | |
7e23fc43 | 3183 | .B " mdadm \-\-examine \-\-brief \-\-scan \-\-config=partitions" |
2d465520 | 3184 | .br |
7e23fc43 | 3185 | .B " mdadm \-Ebsc partitions" |
5787fa49 NB |
3186 | .br |
3187 | Create a list of devices by reading | |
3188 | .BR /proc/partitions , | |
3189 | scan these for RAID superblocks, and printout a brief listing of all | |
93e790af | 3190 | that were found. |
2d465520 | 3191 | |
7e23fc43 | 3192 | .B " mdadm \-Ac partitions \-m 0 /dev/md0" |
2d465520 | 3193 | .br |
5787fa49 NB |
3194 | Scan all partitions and devices listed in |
3195 | .BR /proc/partitions | |
3196 | and assemble | |
3197 | .B /dev/md0 | |
3198 | out of all such devices with a RAID superblock with a minor number of 0. | |
2d465520 | 3199 | |
96fd06ed | 3200 | .B " mdadm \-\-monitor \-\-scan \-\-daemonise > /run/mdadm/mon.pid" |
d013a55e NB |
3201 | .br |
3202 | If config file contains a mail address or alert program, run mdadm in | |
3203 | the background in monitor mode monitoring all md devices. Also write | |
3204 | pid of mdadm daemon to | |
96fd06ed | 3205 | .BR /run/mdadm/mon.pid . |
d013a55e | 3206 | |
7e23fc43 | 3207 | .B " mdadm \-Iq /dev/somedevice" |
8382f19b NB |
3208 | .br |
3209 | Try to incorporate newly discovered device into some array as | |
3210 | appropriate. | |
3211 | ||
7e6140e6 | 3212 | .B " mdadm \-\-incremental \-\-rebuild\-map \-\-run \-\-scan" |
8382f19b NB |
3213 | .br |
3214 | Rebuild the array map from any current arrays, and then start any that | |
3215 | can be started. | |
3216 | ||
b80da661 NB |
3217 | .B " mdadm /dev/md4 --fail detached --remove detached" |
3218 | .br | |
3219 | Any devices which are components of /dev/md4 will be marked as faulty | |
3220 | and then remove from the array. | |
3221 | ||
cb77f620 | 3222 | .B " mdadm --grow /dev/md4 --level=6 --backup-file=/root/backup-md4" |
f24e2d6c N |
3223 | .br |
3224 | The array | |
3225 | .B /dev/md4 | |
3226 | which is currently a RAID5 array will be converted to RAID6. There | |
3227 | should normally already be a spare drive attached to the array as a | |
3228 | RAID6 needs one more drive than a matching RAID5. | |
3229 | ||
8fd8d9c4 N |
3230 | .B " mdadm --create /dev/md/ddf --metadata=ddf --raid-disks 6 /dev/sd[a-f]" |
3231 | .br | |
3232 | Create a DDF array over 6 devices. | |
3233 | ||
3234 | .B " mdadm --create /dev/md/home -n3 -l5 -z 30000000 /dev/md/ddf" | |
3235 | .br | |
e0fe762a | 3236 | Create a RAID5 array over any 3 devices in the given DDF set. Use |
8fd8d9c4 N |
3237 | only 30 gigabytes of each device. |
3238 | ||
3239 | .B " mdadm -A /dev/md/ddf1 /dev/sd[a-f]" | |
3240 | .br | |
3241 | Assemble a pre-exist ddf array. | |
3242 | ||
3243 | .B " mdadm -I /dev/md/ddf1" | |
3244 | .br | |
3245 | Assemble all arrays contained in the ddf array, assigning names as | |
3246 | appropriate. | |
3247 | ||
7e23fc43 | 3248 | .B " mdadm \-\-create \-\-help" |
2d465520 | 3249 | .br |
2ae555c3 | 3250 | Provide help about the Create mode. |
2d465520 | 3251 | |
7e23fc43 | 3252 | .B " mdadm \-\-config \-\-help" |
5787fa49 NB |
3253 | .br |
3254 | Provide help about the format of the config file. | |
2d465520 | 3255 | |
7e23fc43 | 3256 | .B " mdadm \-\-help" |
5787fa49 NB |
3257 | .br |
3258 | Provide general help. | |
cd29a5c8 | 3259 | |
cd29a5c8 NB |
3260 | .SH FILES |
3261 | ||
3262 | .SS /proc/mdstat | |
3263 | ||
2ae555c3 NB |
3264 | If you're using the |
3265 | .B /proc | |
cd29a5c8 NB |
3266 | filesystem, |
3267 | .B /proc/mdstat | |
2d465520 | 3268 | lists all active md devices with information about them. |
51ac42e3 | 3269 | .I mdadm |
2d465520 | 3270 | uses this to find arrays when |
7e23fc43 | 3271 | .B \-\-scan |
2d465520 NB |
3272 | is given in Misc mode, and to monitor array reconstruction |
3273 | on Monitor mode. | |
3274 | ||
9a9dab36 | 3275 | .SS /etc/mdadm.conf |
cd29a5c8 | 3276 | |
11a3e71d NB |
3277 | The config file lists which devices may be scanned to see if |
3278 | they contain MD super block, and gives identifying information | |
3279 | (e.g. UUID) about known MD arrays. See | |
3280 | .BR mdadm.conf (5) | |
3281 | for more details. | |
cd29a5c8 | 3282 | |
9dc70cbc N |
3283 | .SS /etc/mdadm.conf.d |
3284 | ||
3285 | A directory containing configuration files which are read in lexical | |
3286 | order. | |
3287 | ||
96fd06ed | 3288 | .SS {MAP_PATH} |
8382f19b | 3289 | When |
7e23fc43 | 3290 | .B \-\-incremental |
93e790af | 3291 | mode is used, this file gets a list of arrays currently being created. |
8382f19b | 3292 | |
48f7b27a NB |
3293 | .SH DEVICE NAMES |
3294 | ||
48f7b27a | 3295 | .I mdadm |
8fd8d9c4 N |
3296 | understand two sorts of names for array devices. |
3297 | ||
3298 | The first is the so-called 'standard' format name, which matches the | |
3299 | names used by the kernel and which appear in | |
3300 | .IR /proc/mdstat . | |
3301 | ||
3302 | The second sort can be freely chosen, but must reside in | |
3303 | .IR /dev/md/ . | |
3304 | When giving a device name to | |
3305 | .I mdadm | |
3306 | to create or assemble an array, either full path name such as | |
3307 | .I /dev/md0 | |
3308 | or | |
3309 | .I /dev/md/home | |
3310 | can be given, or just the suffix of the second sort of name, such as | |
3311 | .I home | |
3312 | can be given. | |
3313 | ||
3314 | When | |
3315 | .I mdadm | |
e0fe762a N |
3316 | chooses device names during auto-assembly or incremental assembly, it |
3317 | will sometimes add a small sequence number to the end of the name to | |
3318 | avoid conflicted between multiple arrays that have the same name. If | |
8fd8d9c4 N |
3319 | .I mdadm |
3320 | can reasonably determine that the array really is meant for this host, | |
3321 | either by a hostname in the metadata, or by the presence of the array | |
87eb4fab N |
3322 | in |
3323 | .BR mdadm.conf , | |
3324 | then it will leave off the suffix if possible. | |
e0fe762a N |
3325 | Also if the homehost is specified as |
3326 | .B <ignore> | |
3327 | .I mdadm | |
3328 | will only use a suffix if a different array of the same name already | |
3329 | exists or is listed in the config file. | |
48f7b27a NB |
3330 | |
3331 | The standard names for non-partitioned arrays (the only sort of md | |
8fd8d9c4 | 3332 | array available in 2.4 and earlier) are of the form |
48f7b27a | 3333 | .IP |
eca944fa | 3334 | .RB /dev/md NN |
48f7b27a NB |
3335 | .PP |
3336 | where NN is a number. | |
3337 | The standard names for partitionable arrays (as available from 2.6 | |
eca944fa | 3338 | onwards) are of the form: |
48f7b27a | 3339 | .IP |
eca944fa | 3340 | .RB /dev/md_d NN |
48f7b27a | 3341 | .PP |
eca944fa | 3342 | Partition numbers should be indicated by adding "pMM" to these, thus "/dev/md/d1p2". |
8fd8d9c4 | 3343 | .PP |
eca944fa N |
3344 | From kernel version 2.6.28 the "non-partitioned array" can actually |
3345 | be partitioned. So the "md_d\fBNN\fP" | |
3346 | names are no longer needed, and | |
0de5349e | 3347 | partitions such as "/dev/md\fBNN\fPp\fBXX\fP" |
eca944fa N |
3348 | are possible. |
3349 | .PP | |
3350 | From kernel version 2.6.29 standard names can be non-numeric following | |
3351 | the form: | |
3352 | .IP | |
3353 | .RB /dev/md_ XXX | |
3354 | .PP | |
3355 | where | |
3356 | .B XXX | |
3357 | is any string. These names are supported by | |
3358 | .I mdadm | |
3359 | since version 3.3 provided they are enabled in | |
3360 | .IR mdadm.conf . | |
52826846 | 3361 | |
2d465520 | 3362 | .SH NOTE |
51ac42e3 | 3363 | .I mdadm |
2d465520 | 3364 | was previously known as |
51ac42e3 | 3365 | .IR mdctl . |
a9d69660 | 3366 | |
52826846 | 3367 | .SH SEE ALSO |
75f74377 | 3368 | For further information on mdadm usage, MD and the various levels of |
3cdfb6a7 | 3369 | RAID, see: |
3cdfb6a7 | 3370 | .IP |
cb77f620 | 3371 | .B http://raid.wiki.kernel.org/ |
75f74377 DG |
3372 | .PP |
3373 | (based upon Jakob \(/Ostergaard's Software\-RAID.HOWTO) | |
cd29a5c8 | 3374 | .PP |
2ae555c3 | 3375 | The latest version of |
a9d69660 NB |
3376 | .I mdadm |
3377 | should always be available from | |
cd29a5c8 | 3378 | .IP |
11cd8b79 N |
3379 | .B http://www.kernel.org/pub/linux/utils/raid/mdadm/ |
3380 | .PP | |
3381 | Related man pages: | |
cd29a5c8 | 3382 | .PP |
e0fe762a | 3383 | .IR mdmon (8), |
a9d69660 NB |
3384 | .IR mdadm.conf (5), |
3385 | .IR md (4). |