]>
git.ipfire.org Git - thirdparty/mdadm.git/blob - Create.c
2 * mdadm - manage Linux "md" devices aka RAID arrays.
4 * Copyright (C) 2001-2012 Neil Brown <neilb@suse.de>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 * Email: <neilb@suse.de>
30 static int default_layout(struct supertype
*st
, int level
, int verbose
)
34 if (st
&& st
->ss
->default_geometry
)
35 st
->ss
->default_geometry(st
, &level
, &layout
, NULL
);
39 default: /* no layout */
43 layout
= 0x102; /* near=2, far=1 */
45 pr_err("layout defaults to n2\n");
49 layout
= map_name(r5layout
, "default");
51 pr_err("layout defaults to %s\n", map_num(r5layout
, layout
));
54 layout
= map_name(faultylayout
, "default");
57 pr_err("layout defaults to %s\n", map_num(faultylayout
, layout
));
64 int Create(struct supertype
*st
, char *mddev
,
65 char *name
, int *uuid
,
66 int subdevs
, struct mddev_dev
*devlist
,
68 struct context
*c
, unsigned long long data_offset
)
71 * Create a new raid array.
73 * First check that necessary details are available
74 * (i.e. level, raid-disks)
76 * Then check each disk to see what might be on it
77 * and report anything interesting.
79 * If anything looks odd, and runstop not set,
82 * SET_ARRAY_INFO and ADD_NEW_DISK, and
83 * if runstop==run, or raiddisks disks were used,
87 unsigned long long minsize
=0, maxsize
=0;
94 int first_missing
= subdevs
* 2;
95 int second_missing
= subdevs
* 2;
96 int missing_disks
= 0;
97 int insert_point
= subdevs
* 2; /* where to insert a missing drive */
103 int have_container
= 0;
104 int container_fd
= -1;
106 unsigned long long bitmapsize
;
107 struct mdinfo info
, *infos
;
109 int do_default_layout
= 0;
110 int do_default_chunk
= 0;
111 unsigned long safe_mode_delay
= 0;
112 char chosen_name
[1024];
113 struct map_ent
*map
= NULL
;
114 unsigned long long newsize
;
116 int major_num
= BITMAP_MAJOR_HI
;
118 memset(&info
, 0, sizeof(info
));
119 if (s
->level
== UnSet
&& st
&& st
->ss
->default_geometry
)
120 st
->ss
->default_geometry(st
, &s
->level
, NULL
, NULL
);
121 if (s
->level
== UnSet
) {
122 pr_err("a RAID level is needed to create an array.\n");
125 if (s
->raiddisks
< 4 && s
->level
== 6) {
126 pr_err("at least 4 raid-devices needed for level 6\n");
129 if (s
->raiddisks
> 256 && s
->level
== 6) {
130 pr_err("no more than 256 raid-devices supported for level 6\n");
133 if (s
->raiddisks
< 2 && s
->level
>= 4) {
134 pr_err("at least 2 raid-devices needed for level 4 or 5\n");
137 if (s
->level
<= 0 && s
->sparedisks
) {
138 pr_err("This level does not support spare devices\n");
142 if (subdevs
== 1 && strcmp(devlist
->devname
, "missing") != 0) {
143 /* If given a single device, it might be a container, and we can
144 * extract a device list from there
146 mdu_array_info_t inf
;
149 memset(&inf
, 0, sizeof(inf
));
150 fd
= open(devlist
->devname
, O_RDONLY
);
152 ioctl(fd
, GET_ARRAY_INFO
, &inf
) == 0 &&
153 inf
.raid_disks
== 0) {
154 /* yep, looks like a container */
156 rv
= st
->ss
->load_container(st
, fd
,
161 st
= super_by_fd(fd
, NULL
);
162 if (st
&& !(rv
= st
->ss
->
163 load_container(st
, fd
,
169 if (have_container
) {
170 subdevs
= s
->raiddisks
;
171 first_missing
= subdevs
* 2;
172 second_missing
= subdevs
* 2;
173 insert_point
= subdevs
* 2;
179 if (st
&& st
->ss
->external
&& s
->sparedisks
) {
180 pr_err("This metadata type does not support "
181 "spare disks at create time\n");
184 if (subdevs
> s
->raiddisks
+s
->sparedisks
) {
185 pr_err("You have listed more devices (%d) than are in the array(%d)!\n", subdevs
, s
->raiddisks
+s
->sparedisks
);
188 if (!have_container
&& subdevs
< s
->raiddisks
+s
->sparedisks
) {
189 pr_err("You haven't given enough devices (real or missing) to create this array\n");
192 if (s
->bitmap_file
&& s
->level
<= 0) {
193 pr_err("bitmaps not meaningful with level %s\n",
194 map_num(pers
, s
->level
)?:"given");
198 /* now set some defaults */
200 if (s
->layout
== UnSet
) {
201 do_default_layout
= 1;
202 s
->layout
= default_layout(st
, s
->level
, c
->verbose
);
206 /* check layout fits in array*/
207 if ((s
->layout
&255) * ((s
->layout
>>8)&255) > s
->raiddisks
) {
208 pr_err("that layout requires at least %d devices\n",
209 (s
->layout
&255) * ((s
->layout
>>8)&255));
219 if (s
->chunk
== 0 || s
->chunk
== UnSet
) {
221 do_default_chunk
= 1;
222 /* chunk will be set later */
226 /* a chunksize of zero 0s perfectly valid (and preferred) since 2.6.16 */
227 if (get_linux_version() < 2006016 && s
->chunk
== 0) {
230 pr_err("chunk size defaults to 64K\n");
235 case LEVEL_MULTIPATH
:
236 case LEVEL_CONTAINER
:
240 pr_err("chunk size ignored for this level\n");
244 pr_err("unknown level %d\n", s
->level
);
247 if (s
->size
== MAX_SIZE
)
248 /* use '0' to mean 'max' now... */
250 if (s
->size
&& s
->chunk
&& s
->chunk
!= UnSet
)
251 s
->size
&= ~(unsigned long long)(s
->chunk
- 1);
252 newsize
= s
->size
* 2;
253 if (st
&& ! st
->ss
->validate_geometry(st
, s
->level
, s
->layout
, s
->raiddisks
,
254 &s
->chunk
, s
->size
*2,
256 &newsize
, c
->verbose
>=0))
259 if (s
->chunk
&& s
->chunk
!= UnSet
) {
260 newsize
&= ~(unsigned long long)(s
->chunk
*2 - 1);
261 if (do_default_chunk
) {
262 /* default chunk was just set */
265 "defaults to %dK\n", s
->chunk
);
266 s
->size
&= ~(unsigned long long)(s
->chunk
- 1);
267 do_default_chunk
= 0;
272 s
->size
= newsize
/ 2;
274 /* If this is ever reshaped to RAID5, we will
275 * need a chunksize. So round it off a bit
276 * now just to be safe
278 s
->size
&= ~(64ULL-1);
280 if (s
->size
&& c
->verbose
> 0)
281 pr_err("setting size to %lluK\n", s
->size
);
284 /* now look at the subdevs */
285 info
.array
.active_disks
= 0;
286 info
.array
.working_disks
= 0;
288 for (dv
=devlist
; dv
&& !have_container
; dv
=dv
->next
, dnum
++) {
289 char *dname
= dv
->devname
;
290 unsigned long long freesize
;
294 if (strcasecmp(dname
, "missing")==0) {
295 if (first_missing
> dnum
)
296 first_missing
= dnum
;
297 if (second_missing
> dnum
&& dnum
> first_missing
)
298 second_missing
= dnum
;
302 if (data_offset
!= VARIABLE_OFFSET
) {
303 doff
= strchr(dname
, ':');
306 dv
->data_offset
= parse_size(doff
);
308 dv
->data_offset
= INVALID_SECTORS
;
310 dv
->data_offset
= data_offset
;
312 dfd
= open(dname
, O_RDONLY
);
314 pr_err("cannot open %s: %s\n",
315 dname
, strerror(errno
));
318 if (fstat(dfd
, &stb
) != 0 ||
319 (stb
.st_mode
& S_IFMT
) != S_IFBLK
) {
321 pr_err("%s is not a block device\n",
326 info
.array
.working_disks
++;
327 if (dnum
< s
->raiddisks
)
328 info
.array
.active_disks
++;
330 struct createinfo
*ci
= conf_get_create_info();
335 /* Need to choose a default metadata, which is different
336 * depending on geometry of array.
339 char *name
= "default";
340 for(i
=0; !st
&& superlist
[i
]; i
++) {
341 st
= superlist
[i
]->match_metadata_desc(name
);
344 if (do_default_layout
)
345 s
->layout
= default_layout(st
, s
->level
, c
->verbose
);
346 switch (st
->ss
->validate_geometry(
347 st
, s
->level
, s
->layout
, s
->raiddisks
,
348 &s
->chunk
, s
->size
*2,
349 dv
->data_offset
, dname
,
350 &freesize
, c
->verbose
> 0)) {
351 case -1: /* Not valid, message printed, and not
352 * worth checking any further */
355 case 0: /* Geometry not valid */
358 s
->chunk
= do_default_chunk
? UnSet
: s
->chunk
;
360 case 1: /* All happy */
366 int dfd
= open(dname
, O_RDONLY
|O_EXCL
);
368 pr_err("cannot open %s: %s\n",
369 dname
, strerror(errno
));
372 pr_err("device %s not suitable "
373 "for any style of array\n",
377 if (st
->ss
!= &super0
||
378 st
->minor_version
!= 90)
381 if (do_default_layout
)
382 s
->layout
= default_layout(st
, s
->level
, 0);
383 if (!st
->ss
->validate_geometry(st
, s
->level
, s
->layout
,
385 &s
->chunk
, s
->size
*2,
390 pr_err("%s is not suitable for "
398 freesize
/= 2; /* convert to K */
399 if (s
->chunk
&& s
->chunk
!= UnSet
) {
400 /* round to chunk size */
401 freesize
= freesize
& ~(s
->chunk
-1);
402 if (do_default_chunk
) {
403 /* default chunk was just set */
406 "defaults to %dK\n", s
->chunk
);
407 s
->size
&= ~(unsigned long long)(s
->chunk
- 1);
408 do_default_chunk
= 0;
412 if (s
->size
&& freesize
< s
->size
) {
413 pr_err("%s is smaller than given size."
414 " %lluK < %lluK + metadata\n",
415 dname
, freesize
, s
->size
);
419 if (maxdisc
== NULL
|| (maxdisc
&& freesize
> maxsize
)) {
423 if (mindisc
==NULL
|| (mindisc
&& freesize
< minsize
)) {
427 if (c
->runstop
!= 1 || c
->verbose
>= 0) {
428 int fd
= open(dname
, O_RDONLY
);
430 pr_err("Cannot open %s: %s\n",
431 dname
, strerror(errno
));
435 warn
|= check_ext2(fd
, dname
);
436 warn
|= check_reiser(fd
, dname
);
437 warn
|= check_raid(fd
, dname
);
438 if (strcmp(st
->ss
->name
, "1.x") == 0 &&
439 st
->minor_version
>= 1)
440 /* metadata at front */
441 warn
|= check_partitions(fd
, dname
, 0, 0);
442 else if (s
->level
== 1 || s
->level
== LEVEL_CONTAINER
443 || (s
->level
== 0 && s
->raiddisks
== 1))
444 /* partitions could be meaningful */
445 warn
|= check_partitions(fd
, dname
, freesize
*2, s
->size
*2);
447 /* partitions cannot be meaningful */
448 warn
|= check_partitions(fd
, dname
, 0, 0);
449 if (strcmp(st
->ss
->name
, "1.x") == 0 &&
450 st
->minor_version
>= 1 &&
453 (warn
& 1024) == 0) {
455 pr_err("Note: this array has metadata at the start and\n"
456 " may not be suitable as a boot device. If you plan to\n"
457 " store '/boot' on this device please ensure that\n"
458 " your boot-loader understands md/v1.x metadata, or use\n"
459 " --metadata=0.90\n");
464 if (s
->raiddisks
+ s
->sparedisks
> st
->max_devs
) {
465 pr_err("Too many devices:"
466 " %s metadata only supports %d\n",
467 st
->ss
->name
, st
->max_devs
);
471 info
.array
.working_disks
= s
->raiddisks
;
473 pr_err("create aborted\n");
477 if (mindisc
== NULL
&& !have_container
) {
478 pr_err("no size and no drives given - aborting create.\n");
481 if (s
->level
> 0 || s
->level
== LEVEL_MULTIPATH
482 || s
->level
== LEVEL_FAULTY
483 || st
->ss
->external
) {
484 /* size is meaningful */
485 if (!st
->ss
->validate_geometry(st
, s
->level
, s
->layout
,
487 &s
->chunk
, minsize
*2,
490 pr_err("devices too large for RAID level %d\n", s
->level
);
495 /* If this is ever reshaped to RAID5, we will
496 * need a chunksize. So round it off a bit
497 * now just to be safe
499 s
->size
&= ~(64ULL-1);
501 pr_err("size set to %lluK\n", s
->size
);
504 if (!have_container
&& s
->level
> 0 && ((maxsize
-s
->size
)*100 > maxsize
)) {
505 if (c
->runstop
!= 1 || c
->verbose
>= 0)
506 pr_err("largest drive (%s) exceeds size (%lluK) by more than 1%%\n",
511 if (st
->ss
->detail_platform
&& st
->ss
->detail_platform(0, 1, NULL
) != 0) {
512 if (c
->runstop
!= 1 || c
->verbose
>= 0)
513 pr_err("%s unable to enumerate platform support\n"
514 " array may not be compatible with hardware/firmware\n",
520 if (c
->runstop
!= 1) {
521 if (!ask("Continue creating array? ")) {
522 pr_err("create aborted.\n");
527 pr_err("creation continuing despite oddities due to --run\n");
531 /* If this is raid4/5, we want to configure the last active slot
532 * as missing, so that a reconstruct happens (faster than re-parity)
533 * FIX: Can we do this for raid6 as well?
535 if (st
->ss
->external
== 0 &&
536 s
->assume_clean
==0 && c
->force
== 0 && first_missing
>= s
->raiddisks
) {
537 switch ( s
->level
) {
540 insert_point
= s
->raiddisks
-1;
542 info
.array
.active_disks
--;
549 /* For raid6, if creating with 1 missing drive, make a good drive
550 * into a spare, else the create will fail
552 if (s
->assume_clean
== 0 && c
->force
== 0 && first_missing
< s
->raiddisks
&&
553 st
->ss
->external
== 0 &&
554 second_missing
>= s
->raiddisks
&& s
->level
== 6) {
555 insert_point
= s
->raiddisks
- 1;
556 if (insert_point
== first_missing
)
559 info
.array
.active_disks
--;
563 if (s
->level
<= 0 && first_missing
< subdevs
* 2) {
564 pr_err("This level does not support missing devices\n");
568 /* We need to create the device */
570 mdfd
= create_mddev(mddev
, name
, c
->autof
, LOCAL
, chosen_name
);
575 /* verify if chosen_name is not in use,
576 * it could be in conflict with already existing device
577 * e.g. container, array
579 if (strncmp(chosen_name
, "/dev/md/", 8) == 0
580 && map_by_name(&map
, chosen_name
+8) != NULL
) {
581 pr_err("Array name %s is in use already.\n",
589 vers
= md_get_version(mdfd
);
591 pr_err("Create requires md driver version 0.90.0 or later\n");
594 mdu_array_info_t inf
;
595 memset(&inf
, 0, sizeof(inf
));
596 ioctl(mdfd
, GET_ARRAY_INFO
, &inf
);
597 if (inf
.working_disks
!= 0) {
598 pr_err("another array by this name"
599 " is already running.\n");
604 /* Ok, lets try some ioctls */
606 info
.array
.level
= s
->level
;
607 info
.array
.size
= s
->size
;
608 info
.array
.raid_disks
= s
->raiddisks
;
609 /* The kernel should *know* what md_minor we are dealing
610 * with, but it chooses to trust me instead. Sigh
612 info
.array
.md_minor
= 0;
613 if (fstat(mdfd
, &stb
)==0)
614 info
.array
.md_minor
= minor(stb
.st_rdev
);
615 info
.array
.not_persistent
= 0;
617 if ( ( (s
->level
== 4 || s
->level
== 5) &&
618 (insert_point
< s
->raiddisks
|| first_missing
< s
->raiddisks
) )
620 ( s
->level
== 6 && (insert_point
< s
->raiddisks
621 || second_missing
< s
->raiddisks
))
627 info
.array
.state
= 1; /* clean, but one+ drive will be missing*/
628 info
.resync_start
= MaxSector
;
630 info
.array
.state
= 0; /* not clean, but no errors */
631 info
.resync_start
= 0;
633 if (s
->level
== 10) {
634 /* for raid10, the bitmap size is the capacity of the array,
635 * which is array.size * raid_disks / ncopies;
636 * .. but convert to sectors.
638 int ncopies
= ((s
->layout
>>8) & 255) * (s
->layout
& 255);
639 bitmapsize
= s
->size
* s
->raiddisks
/ ncopies
* 2;
640 /* printf("bms=%llu as=%d rd=%d nc=%d\n", bitmapsize, s->size, s->raiddisks, ncopies);*/
642 bitmapsize
= s
->size
* 2;
644 /* There is lots of redundancy in these disk counts,
645 * raid_disks is the most meaningful value
646 * it describes the geometry of the array
648 * nr_disks is total number of used slots.
649 * it should be raid_disks+spare_disks
650 * spare_disks is the number of extra disks present
652 * active_disks is the number of working disks in
653 * active slots. (With raid_disks)
654 * working_disks is the total number of working disks,
656 * failed_disks is the number of disks marked failed
658 * Ideally, the kernel would keep these (except raid_disks)
659 * up-to-date as we ADD_NEW_DISK, but it doesn't (yet).
660 * So for now, we assume that all raid and spare
661 * devices will be given.
663 info
.array
.spare_disks
=s
->sparedisks
;
664 info
.array
.failed_disks
=missing_disks
;
665 info
.array
.nr_disks
= info
.array
.working_disks
666 + info
.array
.failed_disks
;
667 info
.array
.layout
= s
->layout
;
668 info
.array
.chunk_size
= s
->chunk
*1024;
670 if (name
== NULL
|| *name
== 0) {
671 /* base name on mddev */
676 * /dev/md/home -> home
677 * /dev/mdhome -> home
679 /* FIXME compare this with rules in create_mddev */
680 name
= strrchr(mddev
, '/');
683 if (strncmp(name
, "md_d", 4)==0 &&
686 (name
-mddev
) == 5 /* /dev/ */)
688 else if (strncmp(name
, "md", 2)==0 &&
691 (name
-mddev
) == 5 /* /dev/ */)
695 if (!st
->ss
->init_super(st
, &info
.array
, s
->size
, name
, c
->homehost
, uuid
,
699 total_slots
= info
.array
.nr_disks
;
700 st
->ss
->getinfo_super(st
, &info
, NULL
);
701 sysfs_init(&info
, mdfd
, 0);
703 if (did_default
&& c
->verbose
>= 0) {
704 if (is_subarray(info
.text_version
)) {
705 int dnum
= devname2devnum(info
.text_version
+1);
707 int mdp
= get_mdp_major();
710 path
= map_dev(MD_MAJOR
, dnum
, 1);
712 path
= map_dev(mdp
, (-1-dnum
)<< 6, 1);
714 mdi
= sysfs_read(-1, dnum
, GET_VERSION
);
716 pr_err("Creating array inside "
718 mdi
?mdi
->text_version
:"managed", path
);
721 pr_err("Defaulting to version"
722 " %s metadata\n", info
.text_version
);
725 map_update(&map
, fd2devnum(mdfd
), info
.text_version
,
726 info
.uuid
, chosen_name
);
729 if (s
->bitmap_file
&& vers
< 9003) {
730 major_num
= BITMAP_MAJOR_HOSTENDIAN
;
732 pr_err("Warning - bitmaps created on this kernel are not portable\n"
733 " between different architectured. Consider upgrading the Linux kernel.\n");
737 if (s
->bitmap_file
&& strcmp(s
->bitmap_file
, "internal")==0) {
738 if ((vers
%100) < 2) {
739 pr_err("internal bitmaps not supported by this kernel.\n");
742 if (!st
->ss
->add_internal_bitmap
) {
743 pr_err("internal bitmaps not supported with %s metadata\n",
747 if (!st
->ss
->add_internal_bitmap(st
, &s
->bitmap_chunk
,
748 c
->delay
, s
->write_behind
,
749 bitmapsize
, 1, major_num
)) {
750 pr_err("Given bitmap chunk size not supported.\n");
753 s
->bitmap_file
= NULL
;
756 sysfs_init(&info
, mdfd
, 0);
758 if (st
->ss
->external
&& st
->container_dev
!= NoMdDev
) {
761 /* When creating a member, we need to be careful
762 * to negotiate with mdmon properly.
763 * If it is already running, we cannot write to
764 * the devices and must ask it to do that part.
765 * If it isn't running, we write to the devices,
767 * We hold an exclusive open on the container
768 * device to make sure mdmon doesn't exit after
769 * we checked that it is running.
771 * For now, fail if it is already running.
773 container_fd
= open_dev_excl(st
->container_dev
);
774 if (container_fd
< 0) {
775 pr_err("Cannot get exclusive "
776 "open on container - weird.\n");
779 if (mdmon_running(st
->container_dev
)) {
781 pr_err("reusing mdmon "
783 devnum2devname(st
->container_dev
));
784 st
->update_tail
= &st
->updates
;
788 rv
= set_array_info(mdfd
, st
, &info
);
790 pr_err("failed to set array info for %s: %s\n",
791 mddev
, strerror(errno
));
795 if (s
->bitmap_file
) {
798 st
->ss
->uuid_from_super(st
, uuid
);
799 if (CreateBitmap(s
->bitmap_file
, c
->force
, (char*)uuid
, s
->bitmap_chunk
,
800 c
->delay
, s
->write_behind
,
805 bitmap_fd
= open(s
->bitmap_file
, O_RDWR
);
807 pr_err("weird: %s cannot be openned\n",
811 if (ioctl(mdfd
, SET_BITMAP_FILE
, bitmap_fd
) < 0) {
812 pr_err("Cannot set bitmap file for %s: %s\n",
813 mddev
, strerror(errno
));
818 infos
= xmalloc(sizeof(*infos
) * total_slots
);
820 for (pass
=1; pass
<=2 ; pass
++) {
821 struct mddev_dev
*moved_disk
= NULL
; /* the disk that was moved out of the insert point */
823 for (dnum
=0, dv
= devlist
; dv
;
824 dv
=(dv
->next
)?(dv
->next
):moved_disk
, dnum
++) {
827 struct mdinfo
*inf
= &infos
[dnum
];
829 if (dnum
>= total_slots
)
831 if (dnum
== insert_point
) {
835 if (strcasecmp(dv
->devname
, "missing")==0)
839 if (have_container
&& dnum
< info
.array
.raid_disks
- 1)
840 /* repeatedly use the container */
847 inf
->disk
.number
= dnum
;
848 inf
->disk
.raid_disk
= dnum
;
849 if (inf
->disk
.raid_disk
< s
->raiddisks
)
850 inf
->disk
.state
= (1<<MD_DISK_ACTIVE
) |
855 if (dv
->writemostly
== 1)
856 inf
->disk
.state
|= (1<<MD_DISK_WRITEMOSTLY
);
861 if (st
->ss
->external
&&
862 st
->container_dev
!= NoMdDev
)
863 fd
= open(dv
->devname
, O_RDWR
);
865 fd
= open(dv
->devname
, O_RDWR
|O_EXCL
);
868 pr_err("failed to open %s "
869 "after earlier success - aborting\n",
874 inf
->disk
.major
= major(stb
.st_rdev
);
875 inf
->disk
.minor
= minor(stb
.st_rdev
);
878 remove_partitions(fd
);
879 if (st
->ss
->add_to_super(st
, &inf
->disk
,
882 ioctl(mdfd
, STOP_ARRAY
, NULL
);
885 st
->ss
->getinfo_super(st
, inf
, NULL
);
886 safe_mode_delay
= inf
->safe_mode_delay
;
888 if (have_container
&& c
->verbose
> 0)
889 pr_err("Using %s for device %d\n",
890 map_dev(inf
->disk
.major
,
894 if (!have_container
) {
895 /* getinfo_super might have lost these ... */
896 inf
->disk
.major
= major(stb
.st_rdev
);
897 inf
->disk
.minor
= minor(stb
.st_rdev
);
903 rv
= add_disk(mdfd
, st
, &info
, inf
);
906 pr_err("ADD_NEW_DISK for %s "
908 dv
->devname
, strerror(errno
));
913 if (!have_container
&&
914 dv
== moved_disk
&& dnum
!= insert_point
) break;
917 struct mdinfo info_new
;
918 struct map_ent
*me
= NULL
;
920 /* check to see if the uuid has changed due to these
921 * metadata changes, and if so update the member array
922 * and container uuid. Note ->write_init_super clears
923 * the subarray cursor such that ->getinfo_super once
924 * again returns container info.
927 st
->ss
->getinfo_super(st
, &info_new
, NULL
);
928 if (st
->ss
->external
&& s
->level
!= LEVEL_CONTAINER
&&
929 !same_uuid(info_new
.uuid
, info
.uuid
, 0)) {
930 map_update(&map
, fd2devnum(mdfd
),
931 info_new
.text_version
,
932 info_new
.uuid
, chosen_name
);
933 me
= map_by_devnum(&map
, st
->container_dev
);
936 if (st
->ss
->write_init_super(st
)) {
937 st
->ss
->free_super(st
);
941 /* update parent container uuid */
943 char *path
= xstrdup(me
->path
);
945 st
->ss
->getinfo_super(st
, &info_new
, NULL
);
946 map_update(&map
, st
->container_dev
,
947 info_new
.text_version
,
948 info_new
.uuid
, path
);
953 flush_metadata_updates(st
);
954 st
->ss
->free_super(st
);
959 if (s
->level
== LEVEL_CONTAINER
) {
960 /* No need to start. But we should signal udev to
962 sysfs_uevent(&info
, "change");
964 pr_err("container %s prepared.\n", mddev
);
965 wait_for(chosen_name
, mdfd
);
966 } else if (c
->runstop
== 1 || subdevs
>= s
->raiddisks
) {
967 if (st
->ss
->external
) {
971 case LEVEL_MULTIPATH
:
973 err
= sysfs_set_str(&info
, NULL
, "array_state",
980 err
= sysfs_set_str(&info
, NULL
, "array_state",
984 sysfs_set_safemode(&info
, safe_mode_delay
);
987 " activate array.\n");
988 ioctl(mdfd
, STOP_ARRAY
, NULL
);
991 } else if (c
->readonly
&&
992 sysfs_attribute_available(
993 &info
, NULL
, "array_state")) {
994 if (sysfs_set_str(&info
, NULL
,
995 "array_state", "readonly") < 0) {
996 pr_err("Failed to start array: %s\n",
998 ioctl(mdfd
, STOP_ARRAY
, NULL
);
1002 /* param is not actually used */
1004 if (ioctl(mdfd
, RUN_ARRAY
, ¶m
)) {
1005 pr_err("RUN_ARRAY failed: %s\n",
1007 if (info
.array
.chunk_size
& (info
.array
.chunk_size
-1)) {
1008 cont_err("Problem may be that "
1009 "chunk size is not a power of 2\n");
1011 ioctl(mdfd
, STOP_ARRAY
, NULL
);
1015 if (c
->verbose
>= 0)
1016 pr_err("array %s started.\n", mddev
);
1017 if (st
->ss
->external
&& st
->container_dev
!= NoMdDev
) {
1019 start_mdmon(st
->container_dev
);
1021 ping_monitor_by_id(st
->container_dev
);
1022 close(container_fd
);
1024 wait_for(chosen_name
, mdfd
);
1026 pr_err("not starting array - not enough devices.\n");
1034 map_remove(&map
, fd2devnum(mdfd
));