2 * mdadm - manage Linux "md" devices aka RAID arrays.
4 * Copyright (C) 2001-2013 Neil Brown <neilb@suse.de>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 * Email: <neilb@suse.de>
32 #if ! defined(__BIG_ENDIAN) && ! defined(__LITTLE_ENDIAN)
33 #error no endian defined
38 int restore_backup(struct supertype
*st
,
39 struct mdinfo
*content
,
49 int disk_count
= next_spare
+ working_disks
;
50 char *backup_file
= *backup_filep
;
52 dprintf("Called restore_backup()\n");
53 fdlist
= xmalloc(sizeof(int) * disk_count
);
55 enable_fds(next_spare
);
56 for (i
= 0; i
< next_spare
; i
++)
58 for (dev
= content
->devs
; dev
; dev
= dev
->next
) {
64 fd
= dev_open(buf
, O_RDWR
);
66 if (dev
->disk
.raid_disk
>= 0)
67 fdlist
[dev
->disk
.raid_disk
] = fd
;
69 fdlist
[next_spare
++] = fd
;
73 backup_file
= locate_backup(content
->sys_name
);
74 *backup_filep
= backup_file
;
77 if (st
->ss
->external
&& st
->ss
->recover_backup
)
78 err
= st
->ss
->recover_backup(st
, content
);
80 err
= Grow_restart(st
, content
, fdlist
, next_spare
,
81 backup_file
, verbose
> 0);
83 while (next_spare
> 0) {
85 if (fdlist
[next_spare
] >= 0)
86 close(fdlist
[next_spare
]);
90 pr_err("Failed to restore critical"
91 " section for reshape - sorry.\n");
93 pr_err("Possibly you need"
94 " to specify a --backup-file\n");
98 dprintf("restore_backup() returns status OK.\n");
102 int Grow_Add_device(char *devname
, int fd
, char *newdev
)
104 /* Add a device to an active array.
105 * Currently, just extend a linear array.
106 * This requires writing a new superblock on the
107 * new device, calling the kernel to add the device,
108 * and if that succeeds, update the superblock on
110 * This means that we need to *find* all other devices.
117 struct supertype
*st
= NULL
;
118 char *subarray
= NULL
;
120 if (ioctl(fd
, GET_ARRAY_INFO
, &info
.array
) < 0) {
121 pr_err("cannot get array info for %s\n", devname
);
125 if (info
.array
.level
!= -1) {
126 pr_err("can only add devices to linear arrays\n");
130 st
= super_by_fd(fd
, &subarray
);
132 pr_err("cannot handle arrays with superblock version %d\n",
133 info
.array
.major_version
);
138 pr_err("Cannot grow linear sub-arrays yet\n");
144 nfd
= open(newdev
, O_RDWR
|O_EXCL
|O_DIRECT
);
146 pr_err("cannot open %s\n", newdev
);
151 if ((stb
.st_mode
& S_IFMT
) != S_IFBLK
) {
152 pr_err("%s is not a block device!\n", newdev
);
157 /* now check out all the devices and make sure we can read the
159 for (d
=0 ; d
< info
.array
.raid_disks
; d
++) {
160 mdu_disk_info_t disk
;
163 st
->ss
->free_super(st
);
166 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0) {
167 pr_err("cannot get device detail for device %d\n",
173 dv
= map_dev(disk
.major
, disk
.minor
, 1);
175 pr_err("cannot find device file for device %d\n",
181 fd2
= dev_open(dv
, O_RDWR
);
183 pr_err("cannot open device file %s\n", dv
);
189 if (st
->ss
->load_super(st
, fd2
, NULL
)) {
190 pr_err("cannot find super block on %s\n", dv
);
198 /* Ok, looks good. Lets update the superblock and write it out to
202 info
.disk
.number
= d
;
203 info
.disk
.major
= major(stb
.st_rdev
);
204 info
.disk
.minor
= minor(stb
.st_rdev
);
205 info
.disk
.raid_disk
= d
;
206 info
.disk
.state
= (1 << MD_DISK_SYNC
) | (1 << MD_DISK_ACTIVE
);
207 st
->ss
->update_super(st
, &info
, "linear-grow-new", newdev
,
210 if (st
->ss
->store_super(st
, nfd
)) {
211 pr_err("Cannot store new superblock on %s\n",
218 if (ioctl(fd
, ADD_NEW_DISK
, &info
.disk
) != 0) {
219 pr_err("Cannot add new disk to this array\n");
222 /* Well, that seems to have worked.
223 * Now go through and update all superblocks
226 if (ioctl(fd
, GET_ARRAY_INFO
, &info
.array
) < 0) {
227 pr_err("cannot get array info for %s\n", devname
);
232 for (d
=0 ; d
< info
.array
.raid_disks
; d
++) {
233 mdu_disk_info_t disk
;
237 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0) {
238 pr_err("cannot get device detail for device %d\n",
242 dv
= map_dev(disk
.major
, disk
.minor
, 1);
244 pr_err("cannot find device file for device %d\n",
248 fd2
= dev_open(dv
, O_RDWR
);
250 pr_err("cannot open device file %s\n", dv
);
253 if (st
->ss
->load_super(st
, fd2
, NULL
)) {
254 pr_err("cannot find super block on %s\n", dv
);
258 info
.array
.raid_disks
= nd
+1;
259 info
.array
.nr_disks
= nd
+1;
260 info
.array
.active_disks
= nd
+1;
261 info
.array
.working_disks
= nd
+1;
263 st
->ss
->update_super(st
, &info
, "linear-grow-update", dv
,
266 if (st
->ss
->store_super(st
, fd2
)) {
267 pr_err("Cannot store new superblock on %s\n", dv
);
277 int Grow_addbitmap(char *devname
, int fd
, struct context
*c
, struct shape
*s
)
280 * First check that array doesn't have a bitmap
281 * Then create the bitmap
284 * For internal bitmaps, we need to check the version,
285 * find all the active devices, and write the bitmap block
288 mdu_bitmap_file_t bmf
;
289 mdu_array_info_t array
;
290 struct supertype
*st
;
291 char *subarray
= NULL
;
292 int major
= BITMAP_MAJOR_HI
;
293 int vers
= md_get_version(fd
);
294 unsigned long long bitmapsize
, array_size
;
297 major
= BITMAP_MAJOR_HOSTENDIAN
;
298 pr_err("Warning - bitmaps created on this kernel"
299 " are not portable\n"
300 " between different architectures. Consider upgrading"
301 " the Linux kernel.\n");
304 if (ioctl(fd
, GET_BITMAP_FILE
, &bmf
) != 0) {
306 pr_err("Memory allocation failure.\n");
308 pr_err("bitmaps not supported by this kernel.\n");
311 if (bmf
.pathname
[0]) {
312 if (strcmp(s
->bitmap_file
,"none")==0) {
313 if (ioctl(fd
, SET_BITMAP_FILE
, -1)!= 0) {
314 pr_err("failed to remove bitmap %s\n",
320 pr_err("%s already has a bitmap (%s)\n",
321 devname
, bmf
.pathname
);
324 if (ioctl(fd
, GET_ARRAY_INFO
, &array
) != 0) {
325 pr_err("cannot get array status for %s\n", devname
);
328 if (array
.state
& (1<<MD_SB_BITMAP_PRESENT
)) {
329 if (strcmp(s
->bitmap_file
, "none")==0) {
330 array
.state
&= ~(1<<MD_SB_BITMAP_PRESENT
);
331 if (ioctl(fd
, SET_ARRAY_INFO
, &array
)!= 0) {
332 pr_err("failed to remove internal bitmap.\n");
337 pr_err("Internal bitmap already present on %s\n",
342 if (strcmp(s
->bitmap_file
, "none") == 0) {
343 pr_err("no bitmap found on %s\n", devname
);
346 if (array
.level
<= 0) {
347 pr_err("Bitmaps not meaningful with level %s\n",
348 map_num(pers
, array
.level
)?:"of this array");
351 bitmapsize
= array
.size
;
353 if (get_dev_size(fd
, NULL
, &array_size
) &&
354 array_size
> (0x7fffffffULL
<<9)) {
355 /* Array is big enough that we cannot trust array.size
356 * try other approaches
358 bitmapsize
= get_component_size(fd
);
360 if (bitmapsize
== 0) {
361 pr_err("Cannot reliably determine size of array to create bitmap - sorry.\n");
365 if (array
.level
== 10) {
366 int ncopies
= (array
.layout
&255)*((array
.layout
>>8)&255);
367 bitmapsize
= bitmapsize
* array
.raid_disks
/ ncopies
;
370 st
= super_by_fd(fd
, &subarray
);
372 pr_err("Cannot understand version %d.%d\n",
373 array
.major_version
, array
.minor_version
);
377 pr_err("Cannot add bitmaps to sub-arrays yet\n");
382 if (strcmp(s
->bitmap_file
, "internal") == 0) {
385 int offset_setable
= 0;
387 if (st
->ss
->add_internal_bitmap
== NULL
) {
388 pr_err("Internal bitmaps not supported "
389 "with %s metadata\n", st
->ss
->name
);
392 mdi
= sysfs_read(fd
, NULL
, GET_BITMAP_LOCATION
);
395 for (d
=0; d
< st
->max_devs
; d
++) {
396 mdu_disk_info_t disk
;
399 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0)
401 if (disk
.major
== 0 &&
404 if ((disk
.state
& (1<<MD_DISK_SYNC
))==0)
406 dv
= map_dev(disk
.major
, disk
.minor
, 1);
408 int fd2
= dev_open(dv
, O_RDWR
);
411 if (st
->ss
->load_super(st
, fd2
, NULL
)==0) {
412 if (st
->ss
->add_internal_bitmap(
414 &s
->bitmap_chunk
, c
->delay
, s
->write_behind
,
415 bitmapsize
, offset_setable
,
418 st
->ss
->write_bitmap(st
, fd2
);
420 pr_err("failed to create internal bitmap"
421 " - chunksize problem.\n");
429 if (offset_setable
) {
430 st
->ss
->getinfo_super(st
, mdi
, NULL
);
431 sysfs_init(mdi
, fd
, NULL
);
432 rv
= sysfs_set_num_signed(mdi
, NULL
, "bitmap/location",
435 array
.state
|= (1<<MD_SB_BITMAP_PRESENT
);
436 rv
= ioctl(fd
, SET_ARRAY_INFO
, &array
);
440 pr_err("Cannot add bitmap while array is"
441 " resyncing or reshaping etc.\n");
442 pr_err("failed to set internal bitmap.\n");
449 int max_devs
= st
->max_devs
;
451 /* try to load a superblock */
452 for (d
= 0; d
< max_devs
; d
++) {
453 mdu_disk_info_t disk
;
457 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0)
459 if ((disk
.major
==0 && disk
.minor
==0) ||
460 (disk
.state
& (1<<MD_DISK_REMOVED
)))
462 dv
= map_dev(disk
.major
, disk
.minor
, 1);
465 fd2
= dev_open(dv
, O_RDONLY
);
467 if (st
->ss
->load_super(st
, fd2
, NULL
) == 0) {
469 st
->ss
->uuid_from_super(st
, uuid
);
476 pr_err("cannot find UUID for array!\n");
479 if (CreateBitmap(s
->bitmap_file
, c
->force
, (char*)uuid
, s
->bitmap_chunk
,
480 c
->delay
, s
->write_behind
, bitmapsize
, major
)) {
483 bitmap_fd
= open(s
->bitmap_file
, O_RDWR
);
485 pr_err("weird: %s cannot be opened\n",
489 if (ioctl(fd
, SET_BITMAP_FILE
, bitmap_fd
) < 0) {
492 pr_err("Cannot add bitmap while array is"
493 " resyncing or reshaping etc.\n");
494 pr_err("Cannot set bitmap file for %s: %s\n",
495 devname
, strerror(err
));
504 * When reshaping an array we might need to backup some data.
505 * This is written to all spares with a 'super_block' describing it.
506 * The superblock goes 4K from the end of the used space on the
508 * It if written after the backup is complete.
509 * It has the following structure.
512 static struct mdp_backup_super
{
513 char magic
[16]; /* md_backup_data-1 or -2 */
516 /* start/sizes in 512byte sectors */
517 __u64 devstart
; /* address on backup device/file of data */
520 __u32 sb_csum
; /* csum of preceeding bytes. */
522 __u64 devstart2
; /* offset in to data of second section */
525 __u32 sb_csum2
; /* csum of preceeding bytes. */
527 } __attribute__((aligned(512))) bsb
, bsb2
;
529 static __u32
bsb_csum(char *buf
, int len
)
533 for (i
= 0; i
< len
; i
++)
534 csum
= (csum
<<3) + buf
[0];
535 return __cpu_to_le32(csum
);
538 static int check_idle(struct supertype
*st
)
540 /* Check that all member arrays for this container, or the
541 * container of this array, are idle
543 char *container
= (st
->container_devnm
[0]
544 ? st
->container_devnm
: st
->devnm
);
545 struct mdstat_ent
*ent
, *e
;
548 ent
= mdstat_read(0, 0);
549 for (e
= ent
; e
; e
= e
->next
) {
550 if (!is_container_member(e
, container
))
552 if (e
->percent
>= 0) {
561 static int freeze_container(struct supertype
*st
)
563 char *container
= (st
->container_devnm
[0]
564 ? st
->container_devnm
: st
->devnm
);
569 if (block_monitor(container
, 1)) {
570 pr_err("failed to freeze container\n");
577 static void unfreeze_container(struct supertype
*st
)
579 char *container
= (st
->container_devnm
[0]
580 ? st
->container_devnm
: st
->devnm
);
582 unblock_monitor(container
, 1);
585 static int freeze(struct supertype
*st
)
587 /* Try to freeze resync/rebuild on this array/container.
588 * Return -1 if the array is busy,
589 * return -2 container cannot be frozen,
590 * return 0 if this kernel doesn't support 'frozen'
591 * return 1 if it worked.
593 if (st
->ss
->external
)
594 return freeze_container(st
);
596 struct mdinfo
*sra
= sysfs_read(-1, st
->devnm
, GET_VERSION
);
602 /* Need to clear any 'read-auto' status */
603 if (sysfs_get_str(sra
, NULL
, "array_state", buf
, 20) > 0 &&
604 strncmp(buf
, "read-auto", 9) == 0)
605 sysfs_set_str(sra
, NULL
, "array_state", "clean");
607 err
= sysfs_freeze_array(sra
);
613 static void unfreeze(struct supertype
*st
)
615 if (st
->ss
->external
)
616 return unfreeze_container(st
);
618 struct mdinfo
*sra
= sysfs_read(-1, st
->devnm
, GET_VERSION
);
622 sysfs_get_str(sra
, NULL
, "sync_action", buf
, 20) > 0
623 && strcmp(buf
, "frozen\n") == 0) {
624 printf("unfreeze\n");
625 sysfs_set_str(sra
, NULL
, "sync_action", "idle");
631 static void wait_reshape(struct mdinfo
*sra
)
633 int fd
= sysfs_get_fd(sra
, NULL
, "sync_action");
639 while (sysfs_fd_get_str(fd
, action
, 20) > 0 &&
640 strncmp(action
, "reshape", 7) == 0)
641 sysfs_wait(fd
, NULL
);
645 static int reshape_super(struct supertype
*st
, unsigned long long size
,
646 int level
, int layout
, int chunksize
, int raid_disks
,
647 int delta_disks
, char *backup_file
, char *dev
,
648 int direction
, int verbose
)
650 /* nothing extra to check in the native case */
651 if (!st
->ss
->external
)
653 if (!st
->ss
->reshape_super
||
654 !st
->ss
->manage_reshape
) {
655 pr_err("%s metadata does not support reshape\n",
660 return st
->ss
->reshape_super(st
, size
, level
, layout
, chunksize
,
661 raid_disks
, delta_disks
, backup_file
, dev
,
665 static void sync_metadata(struct supertype
*st
)
667 if (st
->ss
->external
) {
668 if (st
->update_tail
) {
669 flush_metadata_updates(st
);
670 st
->update_tail
= &st
->updates
;
672 st
->ss
->sync_metadata(st
);
676 static int subarray_set_num(char *container
, struct mdinfo
*sra
, char *name
, int n
)
678 /* when dealing with external metadata subarrays we need to be
679 * prepared to handle EAGAIN. The kernel may need to wait for
680 * mdmon to mark the array active so the kernel can handle
681 * allocations/writeback when preparing the reshape action
682 * (md_allow_write()). We temporarily disable safe_mode_delay
683 * to close a race with the array_state going clean before the
684 * next write to raid_disks / stripe_cache_size
689 /* only 'raid_disks' and 'stripe_cache_size' trigger md_allow_write */
691 (strcmp(name
, "raid_disks") != 0 &&
692 strcmp(name
, "stripe_cache_size") != 0))
693 return sysfs_set_num(sra
, NULL
, name
, n
);
695 rc
= sysfs_get_str(sra
, NULL
, "safe_mode_delay", safe
, sizeof(safe
));
698 sysfs_set_num(sra
, NULL
, "safe_mode_delay", 0);
699 rc
= sysfs_set_num(sra
, NULL
, name
, n
);
700 if (rc
< 0 && errno
== EAGAIN
) {
701 ping_monitor(container
);
702 /* if we get EAGAIN here then the monitor is not active
705 rc
= sysfs_set_num(sra
, NULL
, name
, n
);
707 sysfs_set_str(sra
, NULL
, "safe_mode_delay", safe
);
711 int start_reshape(struct mdinfo
*sra
, int already_running
,
712 int before_data_disks
, int data_disks
)
715 unsigned long long sync_max_to_set
;
717 sysfs_set_num(sra
, NULL
, "suspend_lo", 0x7FFFFFFFFFFFFFFFULL
);
718 err
= sysfs_set_num(sra
, NULL
, "suspend_hi", sra
->reshape_progress
);
719 err
= err
?: sysfs_set_num(sra
, NULL
, "suspend_lo",
720 sra
->reshape_progress
);
721 if (before_data_disks
<= data_disks
)
722 sync_max_to_set
= sra
->reshape_progress
/ data_disks
;
724 sync_max_to_set
= (sra
->component_size
* data_disks
725 - sra
->reshape_progress
) / data_disks
;
726 if (!already_running
)
727 sysfs_set_num(sra
, NULL
, "sync_min", sync_max_to_set
);
728 err
= err
?: sysfs_set_num(sra
, NULL
, "sync_max", sync_max_to_set
);
729 if (!already_running
)
730 err
= err
?: sysfs_set_str(sra
, NULL
, "sync_action", "reshape");
735 void abort_reshape(struct mdinfo
*sra
)
737 sysfs_set_str(sra
, NULL
, "sync_action", "idle");
738 sysfs_set_num(sra
, NULL
, "suspend_lo", 0x7FFFFFFFFFFFFFFFULL
);
739 sysfs_set_num(sra
, NULL
, "suspend_hi", 0);
740 sysfs_set_num(sra
, NULL
, "suspend_lo", 0);
741 sysfs_set_num(sra
, NULL
, "sync_min", 0);
742 // It isn't safe to reset sync_max as we aren't monitoring.
743 // Array really should be stopped at this point.
746 int remove_disks_for_takeover(struct supertype
*st
,
751 struct mdinfo
*remaining
;
754 if (sra
->array
.level
== 10)
755 nr_of_copies
= layout
& 0xff;
756 else if (sra
->array
.level
== 1)
757 nr_of_copies
= sra
->array
.raid_disks
;
761 remaining
= sra
->devs
;
763 /* for each 'copy', select one device and remove from the list. */
764 for (slot
= 0; slot
< sra
->array
.raid_disks
; slot
+= nr_of_copies
) {
765 struct mdinfo
**diskp
;
768 /* Find a working device to keep */
769 for (diskp
= &remaining
; *diskp
; diskp
= &(*diskp
)->next
) {
770 struct mdinfo
*disk
= *diskp
;
772 if (disk
->disk
.raid_disk
< slot
)
774 if (disk
->disk
.raid_disk
>= slot
+ nr_of_copies
)
776 if (disk
->disk
.state
& (1<<MD_DISK_REMOVED
))
778 if (disk
->disk
.state
& (1<<MD_DISK_FAULTY
))
780 if (!(disk
->disk
.state
& (1<<MD_DISK_SYNC
)))
783 /* We have found a good disk to use! */
785 disk
->next
= sra
->devs
;
794 if (slot
< sra
->array
.raid_disks
) {
795 /* didn't find all slots */
801 sra
->devs
= remaining
;
805 /* Remove all 'remaining' devices from the array */
807 struct mdinfo
*sd
= remaining
;
808 remaining
= sd
->next
;
810 sysfs_set_str(sra
, sd
, "state", "faulty");
811 sysfs_set_str(sra
, sd
, "slot", "none");
812 /* for external metadata disks should be removed in mdmon */
813 if (!st
->ss
->external
)
814 sysfs_set_str(sra
, sd
, "state", "remove");
815 sd
->disk
.state
|= (1<<MD_DISK_REMOVED
);
816 sd
->disk
.state
&= ~(1<<MD_DISK_SYNC
);
817 sd
->next
= sra
->devs
;
823 void reshape_free_fdlist(int *fdlist
,
824 unsigned long long *offsets
,
829 for (i
= 0; i
< size
; i
++)
837 int reshape_prepare_fdlist(char *devname
,
841 unsigned long blocks
,
844 unsigned long long *offsets
)
850 for (d
= 0; d
<= nrdisks
; d
++)
853 for (sd
= sra
->devs
; sd
; sd
= sd
->next
) {
854 if (sd
->disk
.state
& (1<<MD_DISK_FAULTY
))
856 if (sd
->disk
.state
& (1<<MD_DISK_SYNC
)) {
857 char *dn
= map_dev(sd
->disk
.major
,
859 fdlist
[sd
->disk
.raid_disk
]
860 = dev_open(dn
, O_RDONLY
);
861 offsets
[sd
->disk
.raid_disk
] = sd
->data_offset
*512;
862 if (fdlist
[sd
->disk
.raid_disk
] < 0) {
863 pr_err("%s: cannot open component %s\n",
864 devname
, dn
? dn
: "-unknown-");
868 } else if (backup_file
== NULL
) {
870 char *dn
= map_dev(sd
->disk
.major
,
872 fdlist
[d
] = dev_open(dn
, O_RDWR
);
873 offsets
[d
] = (sd
->data_offset
+ sra
->component_size
- blocks
- 8)*512;
875 pr_err("%s: cannot open component %s\n",
876 devname
, dn
? dn
: "-unknown-");
887 int reshape_open_backup_file(char *backup_file
,
892 unsigned long long *offsets
,
896 /* Return 1 on success, 0 on any form of failure */
897 /* need to check backup file is large enough */
903 *fdlist
= open(backup_file
, O_RDWR
|O_CREAT
|(restart
? O_TRUNC
: O_EXCL
),
907 pr_err("%s: cannot create backup file %s: %s\n",
908 devname
, backup_file
, strerror(errno
));
911 /* Guard against backup file being on array device.
912 * If array is partitioned or if LVM etc is in the
913 * way this will not notice, but it is better than
916 fstat(*fdlist
, &stb
);
919 if (stb
.st_rdev
== dev
) {
920 pr_err("backup file must NOT be"
921 " on the array being reshaped.\n");
927 for (i
=0; i
< blocks
+ 8 ; i
++) {
928 if (write(*fdlist
, buf
, 512) != 512) {
929 pr_err("%s: cannot create"
930 " backup file %s: %s\n",
931 devname
, backup_file
, strerror(errno
));
935 if (fsync(*fdlist
) != 0) {
936 pr_err("%s: cannot create backup file %s: %s\n",
937 devname
, backup_file
, strerror(errno
));
941 if (!restart
&& strncmp(backup_file
, MAP_DIR
, strlen(MAP_DIR
)) != 0) {
942 char *bu
= make_backup(sys_name
);
943 if (symlink(backup_file
, bu
))
944 pr_err("Recording backup file in " MAP_DIR
"failed: %s\n",
952 unsigned long compute_backup_blocks(int nchunk
, int ochunk
,
953 unsigned int ndata
, unsigned int odata
)
955 unsigned long a
, b
, blocks
;
956 /* So how much do we need to backup.
957 * We need an amount of data which is both a whole number of
958 * old stripes and a whole number of new stripes.
959 * So LCM for (chunksize*datadisks).
961 a
= (ochunk
/512) * odata
;
962 b
= (nchunk
/512) * ndata
;
965 /* LCM == product / GCD */
966 blocks
= (ochunk
/512) * (nchunk
/512) * odata
* ndata
/ a
;
971 char *analyse_change(char *devname
, struct mdinfo
*info
, struct reshape
*re
)
973 /* Based on the current array state in info->array and
974 * the changes in info->new_* etc, determine:
975 * - whether the change is possible
976 * - Intermediate level/raid_disks/layout
977 * - whether a restriping reshape is needed
978 * - number of sectors in minimum change unit. This
979 * will cover a whole number of stripes in 'before' and
982 * Return message if the change should be rejected
983 * NULL if the change can be achieved
985 * This can be called as part of starting a reshape, or
986 * when assembling an array that is undergoing reshape.
988 int near
, far
, offset
, copies
;
990 int old_chunk
, new_chunk
;
991 /* delta_parity records change in number of devices
992 * caused by level change
994 int delta_parity
= 0;
996 memset(re
, 0, sizeof(*re
));
998 /* If a new level not explicitly given, we assume no-change */
999 if (info
->new_level
== UnSet
)
1000 info
->new_level
= info
->array
.level
;
1002 if (info
->new_chunk
)
1003 switch (info
->new_level
) {
1009 /* chunk size is meaningful, must divide component_size
1012 if (info
->component_size
% (info
->new_chunk
/512)) {
1013 unsigned long long shrink
= info
->component_size
;
1014 shrink
&= ~(unsigned long long)(info
->new_chunk
/512-1);
1015 pr_err("New chunk size (%dK) does not evenly divide device size (%lluk)\n",
1016 info
->new_chunk
/1024, info
->component_size
/2);
1017 pr_err("After shrinking any filesystem, \"mdadm --grow %s --size %llu\"\n",
1019 pr_err("will shrink the array so the given chunk size would work.\n");
1024 return "chunk size not meaningful for this level";
1027 info
->new_chunk
= info
->array
.chunk_size
;
1029 switch (info
->array
.level
) {
1031 return "No reshape is possibly for this RAID level";
1033 if (info
->delta_disks
!= UnSet
)
1034 return "Only --add is supported for LINEAR, setting --raid-disks is not needed";
1036 return "Only --add is supported for LINEAR, other --grow options are not meaningful";
1038 /* RAID1 can convert to RAID1 with different disks, or
1039 * raid5 with 2 disks, or
1042 if (info
->new_level
> 1 &&
1043 (info
->component_size
& 7))
1044 return "Cannot convert RAID1 of this size - "
1045 "reduce size to multiple of 4K first.";
1046 if (info
->new_level
== 0) {
1047 if (info
->delta_disks
!= UnSet
&&
1048 info
->delta_disks
!= 0)
1049 return "Cannot change number of disks "
1050 "with RAID1->RAID0 conversion";
1052 re
->before
.data_disks
= 1;
1053 re
->after
.data_disks
= 1;
1056 if (info
->new_level
== 1) {
1057 if (info
->delta_disks
== UnSet
)
1058 /* Don't know what to do */
1059 return "no change requested for Growing RAID1";
1063 if (info
->array
.raid_disks
== 2 &&
1064 info
->new_level
== 5) {
1067 re
->before
.data_disks
= 1;
1068 if (info
->delta_disks
!= UnSet
&&
1069 info
->delta_disks
!= 0)
1070 re
->after
.data_disks
= 1 + info
->delta_disks
;
1072 re
->after
.data_disks
= 1;
1073 if (re
->after
.data_disks
< 1)
1074 return "Number of disks too small for RAID5";
1076 re
->before
.layout
= ALGORITHM_LEFT_SYMMETRIC
;
1077 info
->array
.chunk_size
= 65536;
1080 /* Could do some multi-stage conversions, but leave that to
1083 return "Impossibly level change request for RAID1";
1086 /* RAID10 can be converted from near mode to
1087 * RAID0 by removing some devices.
1088 * It can also be reshaped if the kernel supports
1091 switch (info
->new_level
) {
1093 if ((info
->array
.layout
& ~0xff) != 0x100)
1094 return "Cannot Grow RAID10 with far/offset layout";
1095 /* number of devices must be multiple of number of copies */
1096 if (info
->array
.raid_disks
% (info
->array
.layout
& 0xff))
1097 return "RAID10 layout too complex for Grow operation";
1099 new_disks
= (info
->array
.raid_disks
1100 / (info
->array
.layout
& 0xff));
1101 if (info
->delta_disks
== UnSet
)
1102 info
->delta_disks
= (new_disks
1103 - info
->array
.raid_disks
);
1105 if (info
->delta_disks
!= new_disks
- info
->array
.raid_disks
)
1106 return "New number of raid-devices impossible for RAID10";
1107 if (info
->new_chunk
&&
1108 info
->new_chunk
!= info
->array
.chunk_size
)
1109 return "Cannot change chunk-size with RAID10 Grow";
1113 re
->before
.data_disks
= new_disks
;
1114 re
->after
.data_disks
= re
->before
.data_disks
;
1118 near
= info
->array
.layout
& 0xff;
1119 far
= (info
->array
.layout
>> 8) & 0xff;
1120 offset
= info
->array
.layout
& 0x10000;
1121 if (far
> 1 && !offset
)
1122 return "Cannot reshape RAID10 in far-mode";
1123 copies
= near
* far
;
1125 old_chunk
= info
->array
.chunk_size
* far
;
1127 if (info
->new_layout
== UnSet
)
1128 info
->new_layout
= info
->array
.layout
;
1130 near
= info
->new_layout
& 0xff;
1131 far
= (info
->new_layout
>> 8) & 0xff;
1132 offset
= info
->new_layout
& 0x10000;
1133 if (far
> 1 && !offset
)
1134 return "Cannot reshape RAID10 to far-mode";
1135 if (near
* far
!= copies
)
1136 return "Cannot change number of copies"
1137 " when reshaping RAID10";
1139 if (info
->delta_disks
== UnSet
)
1140 info
->delta_disks
= 0;
1141 new_disks
= (info
->array
.raid_disks
+
1144 new_chunk
= info
->new_chunk
* far
;
1147 re
->before
.layout
= info
->array
.layout
;
1148 re
->before
.data_disks
= info
->array
.raid_disks
;
1149 re
->after
.layout
= info
->new_layout
;
1150 re
->after
.data_disks
= new_disks
;
1151 /* For RAID10 we don't do backup but do allow reshape,
1152 * so set backup_blocks to INVALID_SECTORS rather than
1154 * And there is no need to synchronise stripes on both
1155 * 'old' and 'new'. So the important
1156 * number is the minimum data_offset difference
1157 * which is the larger of (offset copies * chunk).
1159 re
->backup_blocks
= INVALID_SECTORS
;
1160 re
->min_offset_change
= max(old_chunk
, new_chunk
) / 512;
1161 if (new_disks
< re
->before
.data_disks
&&
1162 info
->space_after
< re
->min_offset_change
)
1163 /* Reduce component size by one chunk */
1164 re
->new_size
= (info
->component_size
-
1165 re
->min_offset_change
);
1167 re
->new_size
= info
->component_size
;
1168 re
->new_size
= re
->new_size
* new_disks
/ copies
;
1172 return "RAID10 can only be changed to RAID0";
1175 /* RAID0 can be converted to RAID10, or to RAID456 */
1176 if (info
->new_level
== 10) {
1177 if (info
->new_layout
== UnSet
&& info
->delta_disks
== UnSet
) {
1178 /* Assume near=2 layout */
1179 info
->new_layout
= 0x102;
1180 info
->delta_disks
= info
->array
.raid_disks
;
1182 if (info
->new_layout
== UnSet
) {
1183 int copies
= 1 + (info
->delta_disks
1184 / info
->array
.raid_disks
);
1185 if (info
->array
.raid_disks
* (copies
-1)
1186 != info
->delta_disks
)
1187 return "Impossible number of devices"
1188 " for RAID0->RAID10";
1189 info
->new_layout
= 0x100 + copies
;
1191 if (info
->delta_disks
== UnSet
) {
1192 int copies
= info
->new_layout
& 0xff;
1193 if (info
->new_layout
!= 0x100 + copies
)
1194 return "New layout impossible"
1195 " for RAID0->RAID10";;
1196 info
->delta_disks
= (copies
- 1) *
1197 info
->array
.raid_disks
;
1199 if (info
->new_chunk
&&
1200 info
->new_chunk
!= info
->array
.chunk_size
)
1201 return "Cannot change chunk-size with RAID0->RAID10";
1204 re
->before
.data_disks
= (info
->array
.raid_disks
+
1206 re
->after
.data_disks
= re
->before
.data_disks
;
1207 re
->before
.layout
= info
->new_layout
;
1211 /* RAID0 can also covert to RAID0/4/5/6 by first converting to
1212 * a raid4 style layout of the final level.
1214 switch (info
->new_level
) {
1219 re
->before
.layout
= 0;
1224 re
->before
.layout
= ALGORITHM_PARITY_N
;
1225 if (info
->new_layout
== UnSet
)
1226 info
->new_layout
= map_name(r5layout
, "default");
1231 re
->before
.layout
= ALGORITHM_PARITY_N
;
1232 if (info
->new_layout
== UnSet
)
1233 info
->new_layout
= map_name(r6layout
, "default");
1236 return "Impossible level change requested";
1238 re
->before
.data_disks
= info
->array
.raid_disks
;
1239 /* determining 'after' layout happens outside this 'switch' */
1243 info
->array
.layout
= ALGORITHM_PARITY_N
;
1245 switch (info
->new_level
) {
1249 re
->level
= info
->array
.level
;
1250 re
->before
.data_disks
= info
->array
.raid_disks
- 1;
1251 re
->before
.layout
= info
->array
.layout
;
1255 re
->before
.data_disks
= info
->array
.raid_disks
- 1;
1256 re
->before
.layout
= info
->array
.layout
;
1261 re
->before
.data_disks
= info
->array
.raid_disks
- 1;
1262 switch (info
->array
.layout
) {
1263 case ALGORITHM_LEFT_ASYMMETRIC
:
1264 re
->before
.layout
= ALGORITHM_LEFT_ASYMMETRIC_6
;
1266 case ALGORITHM_RIGHT_ASYMMETRIC
:
1267 re
->before
.layout
= ALGORITHM_RIGHT_ASYMMETRIC_6
;
1269 case ALGORITHM_LEFT_SYMMETRIC
:
1270 re
->before
.layout
= ALGORITHM_LEFT_SYMMETRIC_6
;
1272 case ALGORITHM_RIGHT_SYMMETRIC
:
1273 re
->before
.layout
= ALGORITHM_RIGHT_SYMMETRIC_6
;
1275 case ALGORITHM_PARITY_0
:
1276 re
->before
.layout
= ALGORITHM_PARITY_0_6
;
1278 case ALGORITHM_PARITY_N
:
1279 re
->before
.layout
= ALGORITHM_PARITY_N_6
;
1282 return "Cannot convert an array with this layout";
1286 if (info
->array
.raid_disks
!= 2)
1287 return "Can only convert a 2-device array to RAID1";
1288 if (info
->delta_disks
!= UnSet
&&
1289 info
->delta_disks
!= 0)
1290 return "Cannot set raid_disk when "
1291 "converting RAID5->RAID1";
1293 info
->new_chunk
= 0;
1296 return "Impossible level change requested";
1300 switch (info
->new_level
) {
1306 re
->before
.data_disks
= info
->array
.raid_disks
- 2;
1307 re
->before
.layout
= info
->array
.layout
;
1310 return "Impossible level change requested";
1315 /* If we reached here then it looks like a re-stripe is
1316 * happening. We have determined the intermediate level
1317 * and initial raid_disks/layout and stored these in 're'.
1319 * We need to deduce the final layout that can be atomically
1320 * converted to the end state.
1322 switch (info
->new_level
) {
1324 /* We can only get to RAID0 from RAID4 or RAID5
1325 * with appropriate layout and one extra device
1327 if (re
->level
!= 4 && re
->level
!= 5)
1328 return "Cannot covert to RAID0 from this level";
1330 switch (re
->level
) {
1332 re
->before
.layout
= 0;
1333 re
->after
.layout
= 0;
1336 re
->after
.layout
= ALGORITHM_PARITY_N
;
1342 /* We can only get to RAID4 from RAID5 */
1343 if (re
->level
!= 4 && re
->level
!= 5)
1344 return "Cannot convert to RAID4 from this level";
1346 switch (re
->level
) {
1348 re
->after
.layout
= 0;
1351 re
->after
.layout
= ALGORITHM_PARITY_N
;
1357 /* We get to RAID5 from RAID5 or RAID6 */
1358 if (re
->level
!= 5 && re
->level
!= 6)
1359 return "Cannot convert to RAID5 from this level";
1361 switch (re
->level
) {
1363 if (info
->new_layout
== UnSet
)
1364 re
->after
.layout
= re
->before
.layout
;
1366 re
->after
.layout
= info
->new_layout
;
1369 if (info
->new_layout
== UnSet
)
1370 info
->new_layout
= re
->before
.layout
;
1372 /* after.layout needs to be raid6 version of new_layout */
1373 if (info
->new_layout
== ALGORITHM_PARITY_N
)
1374 re
->after
.layout
= ALGORITHM_PARITY_N
;
1377 char *ls
= map_num(r5layout
, info
->new_layout
);
1380 /* Current RAID6 layout has a RAID5
1383 strcat(strcpy(layout
, ls
), "-6");
1384 l
= map_name(r6layout
, layout
);
1386 return "Cannot find RAID6 layout"
1389 /* Current RAID6 has no equivalent.
1390 * If it is already a '-6' layout we
1391 * can leave it unchanged, else we must
1394 ls
= map_num(r6layout
, info
->new_layout
);
1396 strcmp(ls
+strlen(ls
)-2, "-6") != 0)
1397 return "Please specify new layout";
1398 l
= info
->new_layout
;
1400 re
->after
.layout
= l
;
1406 /* We must already be at level 6 */
1408 return "Impossible level change";
1409 if (info
->new_layout
== UnSet
)
1410 re
->after
.layout
= info
->array
.layout
;
1412 re
->after
.layout
= info
->new_layout
;
1415 return "Impossible level change requested";
1417 if (info
->delta_disks
== UnSet
)
1418 info
->delta_disks
= delta_parity
;
1420 re
->after
.data_disks
= (re
->before
.data_disks
1423 switch (re
->level
) {
1424 case 6: re
->parity
= 2;
1427 case 5: re
->parity
= 1;
1429 default: re
->parity
= 0;
1432 /* So we have a restripe operation, we need to calculate the number
1433 * of blocks per reshape operation.
1435 re
->new_size
= info
->component_size
* re
->before
.data_disks
;
1436 if (info
->new_chunk
== 0)
1437 info
->new_chunk
= info
->array
.chunk_size
;
1438 if (re
->after
.data_disks
== re
->before
.data_disks
&&
1439 re
->after
.layout
== re
->before
.layout
&&
1440 info
->new_chunk
== info
->array
.chunk_size
) {
1441 /* Nothing to change, can change level immediately. */
1442 re
->level
= info
->new_level
;
1443 re
->backup_blocks
= 0;
1446 if (re
->after
.data_disks
== 1 && re
->before
.data_disks
== 1) {
1447 /* chunk and layout changes make no difference */
1448 re
->level
= info
->new_level
;
1449 re
->backup_blocks
= 0;
1453 if (re
->after
.data_disks
== re
->before
.data_disks
&&
1454 get_linux_version() < 2006032)
1455 return "in-place reshape is not safe before 2.6.32 - sorry.";
1457 if (re
->after
.data_disks
< re
->before
.data_disks
&&
1458 get_linux_version() < 2006030)
1459 return "reshape to fewer devices is not supported before 2.6.30 - sorry.";
1461 re
->backup_blocks
= compute_backup_blocks(
1462 info
->new_chunk
, info
->array
.chunk_size
,
1463 re
->after
.data_disks
,
1464 re
->before
.data_disks
);
1465 re
->min_offset_change
= re
->backup_blocks
/ re
->before
.data_disks
;
1467 re
->new_size
= info
->component_size
* re
->after
.data_disks
;
1471 static int set_array_size(struct supertype
*st
, struct mdinfo
*sra
,
1474 struct mdinfo
*info
;
1478 if ((st
== NULL
) || (sra
== NULL
))
1481 if (text_version
== NULL
)
1482 text_version
= sra
->text_version
;
1483 subarray
= strchr(text_version
+1, '/')+1;
1484 info
= st
->ss
->container_content(st
, subarray
);
1486 unsigned long long current_size
= 0;
1487 unsigned long long new_size
=
1488 info
->custom_array_size
/2;
1490 if (sysfs_get_ll(sra
, NULL
, "array_size", ¤t_size
) == 0 &&
1491 new_size
> current_size
) {
1492 if (sysfs_set_num(sra
, NULL
, "array_size", new_size
)
1494 dprintf("Error: Cannot set array size");
1497 dprintf("Array size changed");
1499 dprintf(" from %llu to %llu.\n",
1500 current_size
, new_size
);
1504 dprintf("Error: set_array_size(): info pointer in NULL\n");
1509 static int reshape_array(char *container
, int fd
, char *devname
,
1510 struct supertype
*st
, struct mdinfo
*info
,
1511 int force
, struct mddev_dev
*devlist
,
1512 unsigned long long data_offset
,
1513 char *backup_file
, int verbose
, int forked
,
1514 int restart
, int freeze_reshape
);
1515 static int reshape_container(char *container
, char *devname
,
1517 struct supertype
*st
,
1518 struct mdinfo
*info
,
1520 char *backup_file
, int verbose
,
1521 int forked
, int restart
, int freeze_reshape
);
1523 int Grow_reshape(char *devname
, int fd
,
1524 struct mddev_dev
*devlist
,
1525 unsigned long long data_offset
,
1526 struct context
*c
, struct shape
*s
)
1528 /* Make some changes in the shape of an array.
1529 * The kernel must support the change.
1531 * There are three different changes. Each can trigger
1532 * a resync or recovery so we freeze that until we have
1533 * requested everything (if kernel supports freezing - 2.6.30).
1535 * - change size (i.e. component_size)
1537 * - change layout/chunksize/ndisks
1539 * The last can require a reshape. It is different on different
1540 * levels so we need to check the level before actioning it.
1541 * Some times the level change needs to be requested after the
1542 * reshape (e.g. raid6->raid5, raid5->raid0)
1545 struct mdu_array_info_s array
;
1547 struct supertype
*st
;
1548 char *subarray
= NULL
;
1552 char *container
= NULL
;
1555 struct mddev_dev
*dv
;
1561 if (ioctl(fd
, GET_ARRAY_INFO
, &array
) < 0) {
1562 pr_err("%s is not an active md array - aborting\n",
1566 if (data_offset
!= INVALID_SECTORS
&& array
.level
!= 10
1567 && (array
.level
< 4 || array
.level
> 6)) {
1568 pr_err("--grow --data-offset not yet supported\n");
1573 (s
->chunk
|| s
->level
!= UnSet
|| s
->layout_str
|| s
->raiddisks
)) {
1574 pr_err("cannot change component size at the same time "
1575 "as other changes.\n"
1576 " Change size first, then check data is intact before "
1577 "making other changes.\n");
1581 if (s
->raiddisks
&& s
->raiddisks
< array
.raid_disks
&& array
.level
> 1 &&
1582 get_linux_version() < 2006032 &&
1583 !check_env("MDADM_FORCE_FEWER")) {
1584 pr_err("reducing the number of devices is not safe before Linux 2.6.32\n"
1585 " Please use a newer kernel\n");
1589 st
= super_by_fd(fd
, &subarray
);
1591 pr_err("Unable to determine metadata format for %s\n", devname
);
1594 if (s
->raiddisks
> st
->max_devs
) {
1595 pr_err("Cannot increase raid-disks on this array"
1596 " beyond %d\n", st
->max_devs
);
1600 /* in the external case we need to check that the requested reshape is
1601 * supported, and perform an initial check that the container holds the
1602 * pre-requisite spare devices (mdmon owns final validation)
1604 if (st
->ss
->external
) {
1608 container
= st
->container_devnm
;
1609 cfd
= open_dev_excl(st
->container_devnm
);
1611 container
= st
->devnm
;
1613 cfd
= open_dev_excl(st
->devnm
);
1617 pr_err("Unable to open container for %s\n",
1623 rv
= st
->ss
->load_container(st
, cfd
, NULL
);
1626 pr_err("Cannot read superblock for %s\n",
1632 /* check if operation is supported for metadata handler */
1633 if (st
->ss
->container_content
) {
1634 struct mdinfo
*cc
= NULL
;
1635 struct mdinfo
*content
= NULL
;
1637 cc
= st
->ss
->container_content(st
, subarray
);
1638 for (content
= cc
; content
; content
= content
->next
) {
1639 int allow_reshape
= 1;
1641 /* check if reshape is allowed based on metadata
1642 * indications stored in content.array.status
1644 if (content
->array
.state
& (1<<MD_SB_BLOCK_VOLUME
))
1646 if (content
->array
.state
1647 & (1<<MD_SB_BLOCK_CONTAINER_RESHAPE
))
1649 if (!allow_reshape
) {
1650 pr_err("cannot reshape arrays in"
1651 " container with unsupported"
1652 " metadata: %s(%s)\n",
1653 devname
, container
);
1661 if (mdmon_running(container
))
1662 st
->update_tail
= &st
->updates
;
1666 for (dv
= devlist
; dv
; dv
= dv
->next
)
1668 if (s
->raiddisks
> array
.raid_disks
&&
1669 array
.spare_disks
+added_disks
< (s
->raiddisks
- array
.raid_disks
) &&
1671 pr_err("Need %d spare%s to avoid degraded array,"
1672 " and only have %d.\n"
1673 " Use --force to over-ride this check.\n",
1674 s
->raiddisks
- array
.raid_disks
,
1675 s
->raiddisks
- array
.raid_disks
== 1 ? "" : "s",
1676 array
.spare_disks
+ added_disks
);
1680 sra
= sysfs_read(fd
, NULL
, GET_LEVEL
| GET_DISKS
| GET_DEVS
1681 | GET_STATE
| GET_VERSION
);
1683 if (st
->ss
->external
&& subarray
== NULL
) {
1684 array
.level
= LEVEL_CONTAINER
;
1685 sra
->array
.level
= LEVEL_CONTAINER
;
1688 pr_err("failed to read sysfs parameters for %s\n",
1692 frozen
= freeze(st
);
1694 /* freeze() already spewed the reason */
1697 } else if (frozen
< 0) {
1698 pr_err("%s is performing resync/recovery and cannot"
1699 " be reshaped\n", devname
);
1704 /* ========= set size =============== */
1705 if (s
->size
> 0 && (s
->size
== MAX_SIZE
|| s
->size
!= (unsigned)array
.size
)) {
1706 unsigned long long orig_size
= get_component_size(fd
)/2;
1707 unsigned long long min_csize
;
1709 int raid0_takeover
= 0;
1712 orig_size
= (unsigned) array
.size
;
1714 if (orig_size
== 0) {
1715 pr_err("Cannot set device size in this type of array.\n");
1720 if (reshape_super(st
, s
->size
, UnSet
, UnSet
, 0, 0, UnSet
, NULL
,
1721 devname
, APPLY_METADATA_CHANGES
, c
->verbose
> 0)) {
1726 if (st
->ss
->external
) {
1727 /* metadata can have size limitation
1728 * update size value according to metadata information
1730 struct mdinfo
*sizeinfo
=
1731 st
->ss
->container_content(st
, subarray
);
1733 unsigned long long new_size
=
1734 sizeinfo
->custom_array_size
/2;
1735 int data_disks
= get_data_disks(
1736 sizeinfo
->array
.level
,
1737 sizeinfo
->array
.layout
,
1738 sizeinfo
->array
.raid_disks
);
1739 new_size
/= data_disks
;
1740 dprintf("Metadata size correction from %llu to "
1741 "%llu (%llu)\n", orig_size
, new_size
,
1742 new_size
* data_disks
);
1744 sysfs_free(sizeinfo
);
1748 /* Update the size of each member device in case
1749 * they have been resized. This will never reduce
1750 * below the current used-size. The "size" attribute
1751 * understands '0' to mean 'max'.
1755 for (mdi
= sra
->devs
; mdi
; mdi
= mdi
->next
) {
1756 if (sysfs_set_num(sra
, mdi
, "size",
1757 s
->size
== MAX_SIZE
? 0 : s
->size
) < 0) {
1758 /* Probably kernel refusing to let us
1759 * reduce the size - not an error.
1763 if (array
.not_persistent
== 0 &&
1764 array
.major_version
== 0 &&
1765 get_linux_version() < 3001000) {
1766 /* Dangerous to allow size to exceed 2TB */
1767 unsigned long long csize
;
1768 if (sysfs_get_ll(sra
, mdi
, "size", &csize
) == 0) {
1769 if (csize
>= 2ULL*1024*1024*1024)
1770 csize
= 2ULL*1024*1024*1024;
1771 if ((min_csize
== 0 || (min_csize
1778 pr_err("Cannot set size on "
1779 "array members.\n");
1780 goto size_change_error
;
1782 if (min_csize
&& s
->size
> min_csize
) {
1783 pr_err("Cannot safely make this array "
1784 "use more than 2TB per device on this kernel.\n");
1786 goto size_change_error
;
1788 if (min_csize
&& s
->size
== MAX_SIZE
) {
1789 /* Don't let the kernel choose a size - it will get
1792 pr_err("Limited v0.90 array to "
1793 "2TB per device\n");
1794 s
->size
= min_csize
;
1796 if (st
->ss
->external
) {
1797 if (sra
->array
.level
== 0) {
1798 rv
= sysfs_set_str(sra
, NULL
, "level",
1802 /* get array parametes after takeover
1803 * to chane one parameter at time only
1805 rv
= ioctl(fd
, GET_ARRAY_INFO
, &array
);
1808 /* make sure mdmon is
1809 * aware of the new level */
1810 if (!mdmon_running(st
->container_devnm
))
1811 start_mdmon(st
->container_devnm
);
1812 ping_monitor(container
);
1813 if (mdmon_running(st
->container_devnm
) &&
1814 st
->update_tail
== NULL
)
1815 st
->update_tail
= &st
->updates
;
1818 if (s
->size
== MAX_SIZE
)
1820 array
.size
= s
->size
;
1821 if (s
->size
& ~INT32_MAX
) {
1822 /* got truncated to 32bit, write to
1823 * component_size instead
1826 rv
= sysfs_set_num(sra
, NULL
,
1827 "component_size", s
->size
);
1831 rv
= ioctl(fd
, SET_ARRAY_INFO
, &array
);
1833 /* manage array size when it is managed externally
1835 if ((rv
== 0) && st
->ss
->external
)
1836 rv
= set_array_size(st
, sra
, sra
->text_version
);
1839 if (raid0_takeover
) {
1840 /* do not recync non-existing parity,
1841 * we will drop it anyway
1843 sysfs_set_str(sra
, NULL
, "sync_action", "frozen");
1844 /* go back to raid0, drop parity disk
1846 sysfs_set_str(sra
, NULL
, "level", "raid0");
1847 ioctl(fd
, GET_ARRAY_INFO
, &array
);
1854 /* restore metadata */
1855 if (reshape_super(st
, orig_size
, UnSet
, UnSet
, 0, 0,
1856 UnSet
, NULL
, devname
,
1857 ROLLBACK_METADATA_CHANGES
,
1860 pr_err("Cannot set device size for %s: %s\n",
1861 devname
, strerror(err
));
1863 (array
.state
& (1<<MD_SB_BITMAP_PRESENT
)))
1864 cont_err("Bitmap must be removed before size can be changed\n");
1868 if (s
->assume_clean
) {
1869 /* This will fail on kernels older than 3.0 unless
1870 * a backport has been arranged.
1873 sysfs_set_str(sra
, NULL
, "resync_start", "none") < 0)
1874 pr_err("--assume-clean not supported with --grow on this kernel\n");
1876 ioctl(fd
, GET_ARRAY_INFO
, &array
);
1877 s
->size
= get_component_size(fd
)/2;
1879 s
->size
= array
.size
;
1880 if (c
->verbose
>= 0) {
1881 if (s
->size
== orig_size
)
1882 pr_err("component size of %s "
1883 "unchanged at %lluK\n",
1886 pr_err("component size of %s "
1887 "has been set to %lluK\n",
1891 } else if (array
.level
!= LEVEL_CONTAINER
) {
1892 s
->size
= get_component_size(fd
)/2;
1894 s
->size
= array
.size
;
1897 /* See if there is anything else to do */
1898 if ((s
->level
== UnSet
|| s
->level
== array
.level
) &&
1899 (s
->layout_str
== NULL
) &&
1900 (s
->chunk
== 0 || s
->chunk
== array
.chunk_size
) &&
1901 data_offset
== INVALID_SECTORS
&&
1902 (s
->raiddisks
== 0 || s
->raiddisks
== array
.raid_disks
)) {
1903 /* Nothing more to do */
1904 if (!changed
&& c
->verbose
>= 0)
1905 pr_err("%s: no change requested\n",
1910 /* ========= check for Raid10/Raid1 -> Raid0 conversion ===============
1911 * current implementation assumes that following conditions must be met:
1914 * - near_copies == 2
1916 if ((s
->level
== 0 && array
.level
== 10 && sra
&&
1917 array
.layout
== ((1 << 8) + 2) && !(array
.raid_disks
& 1)) ||
1918 (s
->level
== 0 && array
.level
== 1 && sra
)) {
1920 err
= remove_disks_for_takeover(st
, sra
, array
.layout
);
1922 dprintf("%s: Array cannot be reshaped\n", Name
);
1928 /* Make sure mdmon has seen the device removal
1929 * and updated metadata before we continue with
1933 ping_monitor(container
);
1936 memset(&info
, 0, sizeof(info
));
1938 sysfs_init(&info
, fd
, NULL
);
1939 strcpy(info
.text_version
, sra
->text_version
);
1940 info
.component_size
= s
->size
*2;
1941 info
.new_level
= s
->level
;
1942 info
.new_chunk
= s
->chunk
* 1024;
1943 if (info
.array
.level
== LEVEL_CONTAINER
) {
1944 info
.delta_disks
= UnSet
;
1945 info
.array
.raid_disks
= s
->raiddisks
;
1946 } else if (s
->raiddisks
)
1947 info
.delta_disks
= s
->raiddisks
- info
.array
.raid_disks
;
1949 info
.delta_disks
= UnSet
;
1950 if (s
->layout_str
== NULL
) {
1951 info
.new_layout
= UnSet
;
1952 if (info
.array
.level
== 6 &&
1953 (info
.new_level
== 6 || info
.new_level
== UnSet
) &&
1954 info
.array
.layout
>= 16) {
1955 pr_err("%s has a non-standard layout. If you"
1956 " wish to preserve this\n", devname
);
1957 cont_err("during the reshape, please specify"
1958 " --layout=preserve\n");
1959 cont_err("If you want to change it, specify a"
1960 " layout or use --layout=normalise\n");
1964 } else if (strcmp(s
->layout_str
, "normalise") == 0 ||
1965 strcmp(s
->layout_str
, "normalize") == 0) {
1966 /* If we have a -6 RAID6 layout, remove the '-6'. */
1967 info
.new_layout
= UnSet
;
1968 if (info
.array
.level
== 6 && info
.new_level
== UnSet
) {
1970 strcpy(l
, map_num(r6layout
, info
.array
.layout
));
1971 h
= strrchr(l
, '-');
1972 if (h
&& strcmp(h
, "-6") == 0) {
1974 info
.new_layout
= map_name(r6layout
, l
);
1977 pr_err("%s is only meaningful when reshaping"
1978 " a RAID6 array.\n", s
->layout_str
);
1982 } else if (strcmp(s
->layout_str
, "preserve") == 0) {
1983 /* This means that a non-standard RAID6 layout
1986 * - When reshape a RAID6 (e.g. adding a device)
1987 * which is in a non-standard layout, it is OK
1988 * to preserve that layout.
1989 * - When converting a RAID5 to RAID6, leave it in
1990 * the XXX-6 layout, don't re-layout.
1992 if (info
.array
.level
== 6 && info
.new_level
== UnSet
)
1993 info
.new_layout
= info
.array
.layout
;
1994 else if (info
.array
.level
== 5 && info
.new_level
== 6) {
1996 strcpy(l
, map_num(r5layout
, info
.array
.layout
));
1998 info
.new_layout
= map_name(r6layout
, l
);
2000 pr_err("%s in only meaningful when reshaping"
2001 " to RAID6\n", s
->layout_str
);
2006 int l
= info
.new_level
;
2008 l
= info
.array
.level
;
2011 info
.new_layout
= map_name(r5layout
, s
->layout_str
);
2014 info
.new_layout
= map_name(r6layout
, s
->layout_str
);
2017 info
.new_layout
= parse_layout_10(s
->layout_str
);
2020 info
.new_layout
= parse_layout_faulty(s
->layout_str
);
2023 pr_err("layout not meaningful"
2024 " with this level\n");
2028 if (info
.new_layout
== UnSet
) {
2029 pr_err("layout %s not understood"
2030 " for this level\n",
2037 if (array
.level
== LEVEL_FAULTY
) {
2038 if (s
->level
!= UnSet
&& s
->level
!= array
.level
) {
2039 pr_err("cannot change level of Faulty device\n");
2043 pr_err("cannot set chunksize of Faulty device\n");
2046 if (s
->raiddisks
&& s
->raiddisks
!= 1) {
2047 pr_err("cannot set raid_disks of Faulty device\n");
2050 if (s
->layout_str
) {
2051 if (ioctl(fd
, GET_ARRAY_INFO
, &array
) != 0) {
2052 dprintf("Cannot get array information.\n");
2055 array
.layout
= info
.new_layout
;
2056 if (ioctl(fd
, SET_ARRAY_INFO
, &array
) != 0) {
2057 pr_err("failed to set new layout\n");
2059 } else if (c
->verbose
>= 0)
2060 printf("layout for %s set to %d\n",
2061 devname
, array
.layout
);
2063 } else if (array
.level
== LEVEL_CONTAINER
) {
2064 /* This change is to be applied to every array in the
2065 * container. This is only needed when the metadata imposes
2066 * restraints of the various arrays in the container.
2067 * Currently we only know that IMSM requires all arrays
2068 * to have the same number of devices so changing the
2069 * number of devices (On-Line Capacity Expansion) must be
2070 * performed at the level of the container
2072 rv
= reshape_container(container
, devname
, -1, st
, &info
,
2073 c
->force
, c
->backup_file
, c
->verbose
, 0, 0, 0);
2076 /* get spare devices from external metadata
2078 if (st
->ss
->external
) {
2079 struct mdinfo
*info2
;
2081 info2
= st
->ss
->container_content(st
, subarray
);
2083 info
.array
.spare_disks
=
2084 info2
->array
.spare_disks
;
2089 /* Impose these changes on a single array. First
2090 * check that the metadata is OK with the change. */
2092 if (reshape_super(st
, 0, info
.new_level
,
2093 info
.new_layout
, info
.new_chunk
,
2094 info
.array
.raid_disks
, info
.delta_disks
,
2095 c
->backup_file
, devname
, APPLY_METADATA_CHANGES
,
2101 rv
= reshape_array(container
, fd
, devname
, st
, &info
, c
->force
,
2102 devlist
, data_offset
, c
->backup_file
, c
->verbose
,
2113 /* verify_reshape_position()
2114 * Function checks if reshape position in metadata is not farther
2115 * than position in md.
2117 * 0 : not valid sysfs entry
2118 * it can be caused by not started reshape, it should be started
2119 * by reshape array or raid0 array is before takeover
2120 * -1 : error, reshape position is obviously wrong
2121 * 1 : success, reshape progress correct or updated
2123 static int verify_reshape_position(struct mdinfo
*info
, int level
)
2129 /* read sync_max, failure can mean raid0 array */
2130 rv
= sysfs_get_str(info
, NULL
, "sync_max", buf
, 40);
2134 unsigned long long position
= strtoull(buf
, &ep
, 0);
2136 dprintf("%s: Read sync_max sysfs entry is: %s\n", Name
, buf
);
2137 if (!(ep
== buf
|| (*ep
!= 0 && *ep
!= '\n' && *ep
!= ' '))) {
2138 position
*= get_data_disks(level
,
2140 info
->array
.raid_disks
);
2141 if (info
->reshape_progress
< position
) {
2142 dprintf("Corrected reshape progress (%llu) to "
2143 "md position (%llu)\n",
2144 info
->reshape_progress
, position
);
2145 info
->reshape_progress
= position
;
2147 } else if (info
->reshape_progress
> position
) {
2148 pr_err("Fatal error: array "
2149 "reshape was not properly frozen "
2150 "(expected reshape position is %llu, "
2151 "but reshape progress is %llu.\n",
2152 position
, info
->reshape_progress
);
2155 dprintf("Reshape position in md and metadata "
2160 } else if (rv
== 0) {
2161 /* for valid sysfs entry, 0-length content
2162 * should be indicated as error
2170 static unsigned long long choose_offset(unsigned long long lo
,
2171 unsigned long long hi
,
2172 unsigned long long min
,
2173 unsigned long long max
)
2175 /* Choose a new offset between hi and lo.
2176 * It must be between min and max, but
2177 * we would prefer something near the middle of hi/lo, and also
2178 * prefer to be aligned to a big power of 2.
2180 * So we start with the middle, then for each bit,
2181 * starting at '1' and increasing, if it is set, we either
2182 * add it or subtract it if possible, preferring the option
2183 * which is furthest from the boundary.
2185 * We stop once we get a 1MB alignment. As units are in sectors,
2186 * 1MB = 2*1024 sectors.
2188 unsigned long long choice
= (lo
+ hi
) / 2;
2189 unsigned long long bit
= 1;
2191 for (bit
= 1; bit
< 2*1024; bit
= bit
<< 1) {
2192 unsigned long long bigger
, smaller
;
2193 if (! (bit
& choice
))
2195 bigger
= choice
+ bit
;
2196 smaller
= choice
- bit
;
2197 if (bigger
> max
&& smaller
< min
)
2201 else if (smaller
< min
)
2203 else if (hi
- bigger
> smaller
- lo
)
2211 static int set_new_data_offset(struct mdinfo
*sra
, struct supertype
*st
,
2212 char *devname
, int delta_disks
,
2213 unsigned long long data_offset
,
2214 unsigned long long min
,
2220 unsigned long long before
, after
;
2222 /* Need to find min space before and after so same is used
2225 before
= UINT64_MAX
;
2227 for (sd
= sra
->devs
; sd
; sd
= sd
->next
) {
2231 struct supertype
*st2
;
2232 struct mdinfo info2
;
2234 if (sd
->disk
.state
& (1<<MD_DISK_FAULTY
))
2236 dn
= map_dev(sd
->disk
.major
, sd
->disk
.minor
, 0);
2237 dfd
= dev_open(dn
, O_RDONLY
);
2239 pr_err("%s: cannot open component %s\n",
2240 devname
, dn
? dn
: "-unknown-");
2243 st2
= dup_super(st
);
2244 rv
= st2
->ss
->load_super(st2
,dfd
, NULL
);
2248 pr_err("%s: cannot get superblock from %s\n",
2252 st2
->ss
->getinfo_super(st2
, &info2
, NULL
);
2253 st2
->ss
->free_super(st2
);
2255 if (info2
.space_before
== 0 &&
2256 info2
.space_after
== 0) {
2257 /* Metadata doesn't support data_offset changes */
2258 pr_err("%s: Metadata version doesn't support"
2259 " data_offset changes\n", devname
);
2262 if (before
> info2
.space_before
)
2263 before
= info2
.space_before
;
2264 if (after
> info2
.space_after
)
2265 after
= info2
.space_after
;
2267 if (data_offset
!= INVALID_SECTORS
) {
2269 if (info2
.data_offset
== data_offset
) {
2270 pr_err("%s: already has that data_offset\n",
2274 if (data_offset
< info2
.data_offset
)
2278 } else if ((data_offset
<= info2
.data_offset
&& dir
== 1) ||
2279 (data_offset
>= info2
.data_offset
&& dir
== -1)) {
2280 pr_err("%s: differing data offsets on devices make this --data-offset setting impossible\n",
2286 if (before
== UINT64_MAX
)
2287 /* impossible really, there must be no devices */
2290 for (sd
= sra
->devs
; sd
; sd
= sd
->next
) {
2291 char *dn
= map_dev(sd
->disk
.major
, sd
->disk
.minor
, 0);
2292 unsigned long long new_data_offset
;
2294 if (sd
->disk
.state
& (1<<MD_DISK_FAULTY
))
2296 if (delta_disks
< 0) {
2297 /* Don't need any space as array is shrinking
2298 * just move data_offset up by min
2300 if (data_offset
== INVALID_SECTORS
)
2301 new_data_offset
= sd
->data_offset
+ min
;
2303 if (data_offset
< sd
->data_offset
+ min
) {
2304 pr_err("--data-offset too small for %s\n",
2308 new_data_offset
= data_offset
;
2310 } else if (delta_disks
> 0) {
2311 /* need space before */
2315 pr_err("Insufficient head-space for reshape on %s\n",
2319 if (data_offset
== INVALID_SECTORS
)
2320 new_data_offset
= sd
->data_offset
- min
;
2322 if (data_offset
> sd
->data_offset
- min
) {
2323 pr_err("--data-offset too large for %s\n",
2327 new_data_offset
= data_offset
;
2331 /* can move up or down. If 'data_offset'
2332 * was set we would have already decided,
2333 * so just choose direction with most space.
2340 sysfs_set_str(sra
, NULL
, "reshape_direction",
2341 dir
== 1 ? "backwards" : "forwards");
2343 /* Increase data offset */
2347 pr_err("Insufficient tail-space for reshape on %s\n",
2351 if (data_offset
!= INVALID_SECTORS
&&
2352 data_offset
< sd
->data_offset
+ min
) {
2353 pr_err("--data-offset too small on %s\n",
2357 if (data_offset
!= INVALID_SECTORS
)
2358 new_data_offset
= data_offset
;
2360 new_data_offset
= choose_offset(sd
->data_offset
,
2361 sd
->data_offset
+ after
,
2362 sd
->data_offset
+ min
,
2363 sd
->data_offset
+ after
);
2365 /* Decrease data offset */
2369 pr_err("insufficient head-room on %s\n",
2373 if (data_offset
!= INVALID_SECTORS
&&
2374 data_offset
< sd
->data_offset
- min
) {
2375 pr_err("--data-offset too small on %s\n",
2379 if (data_offset
!= INVALID_SECTORS
)
2380 new_data_offset
= data_offset
;
2382 new_data_offset
= choose_offset(sd
->data_offset
- before
,
2384 sd
->data_offset
- before
,
2385 sd
->data_offset
- min
);
2388 err
= sysfs_set_num(sra
, sd
, "new_offset", new_data_offset
);
2389 if (err
< 0 && errno
== E2BIG
) {
2390 /* try again after increasing data size to max */
2391 err
= sysfs_set_num(sra
, sd
, "size", 0);
2392 if (err
< 0 && errno
== EINVAL
&&
2393 !(sd
->disk
.state
& (1<<MD_DISK_SYNC
))) {
2394 /* some kernels have a bug where you cannot
2395 * use '0' on spare devices. */
2396 sysfs_set_num(sra
, sd
, "size",
2397 (sra
->component_size
+ after
)/2);
2399 err
= sysfs_set_num(sra
, sd
, "new_offset",
2403 if (errno
== E2BIG
&& data_offset
!= INVALID_SECTORS
) {
2404 pr_err("data-offset is too big for %s\n",
2408 if (sd
== sra
->devs
&&
2409 (errno
== ENOENT
|| errno
== E2BIG
))
2410 /* Early kernel, no 'new_offset' file,
2411 * or kernel doesn't like us.
2412 * For RAID5/6 this is not fatal
2415 pr_err("Cannot set new_offset for %s\n",
2424 /* Just use a backup file */
2428 static int raid10_reshape(char *container
, int fd
, char *devname
,
2429 struct supertype
*st
, struct mdinfo
*info
,
2430 struct reshape
*reshape
,
2431 unsigned long long data_offset
,
2432 int force
, int verbose
)
2434 /* Changing raid_disks, layout, chunksize or possibly
2435 * just data_offset for a RAID10.
2436 * We must always change data_offset. We change by at least
2437 * ->min_offset_change which is the largest of the old and new
2439 * If raid_disks is increasing, then data_offset must decrease
2440 * by at least this copy size.
2441 * If raid_disks is unchanged, data_offset must increase or
2442 * decrease by at least min_offset_change but preferably by much more.
2443 * We choose half of the available space.
2444 * If raid_disks is decreasing, data_offset must increase by
2445 * at least min_offset_change. To allow of this, component_size
2446 * must be decreased by the same amount.
2448 * So we calculate the required minimum and direction, possibly
2449 * reduce the component_size, then iterate through the devices
2450 * and set the new_data_offset.
2451 * If that all works, we set chunk_size, layout, raid_disks, and start
2455 unsigned long long min
;
2458 sra
= sysfs_read(fd
, NULL
,
2459 GET_COMPONENT
|GET_DEVS
|GET_OFFSET
|GET_STATE
|GET_CHUNK
2462 pr_err("%s: Cannot get array details from sysfs\n",
2466 min
= reshape
->min_offset_change
;
2468 if (info
->delta_disks
)
2469 sysfs_set_str(sra
, NULL
, "reshape_direction",
2470 info
->delta_disks
< 0 ? "backwards" : "forwards");
2471 if (info
->delta_disks
< 0 &&
2472 info
->space_after
< min
) {
2473 int rv
= sysfs_set_num(sra
, NULL
, "component_size",
2474 (sra
->component_size
-
2477 pr_err("cannot reduce component size\n");
2481 err
= set_new_data_offset(sra
, st
, devname
, info
->delta_disks
, data_offset
,
2484 pr_err("Cannot set new_data_offset: RAID10 reshape not\n");
2485 cont_err("supported on this kernel\n");
2491 if (!err
&& sysfs_set_num(sra
, NULL
, "chunk_size", info
->new_chunk
) < 0)
2493 if (!err
&& sysfs_set_num(sra
, NULL
, "layout", reshape
->after
.layout
) < 0)
2495 if (!err
&& sysfs_set_num(sra
, NULL
, "raid_disks",
2496 info
->array
.raid_disks
+ info
->delta_disks
) < 0)
2498 if (!err
&& sysfs_set_str(sra
, NULL
, "sync_action", "reshape") < 0)
2501 pr_err("Cannot set array shape for %s\n",
2504 (info
->array
.state
& (1<<MD_SB_BITMAP_PRESENT
)))
2505 cont_err(" Bitmap must be removed before"
2506 " shape can be changed\n");
2516 static void get_space_after(int fd
, struct supertype
*st
, struct mdinfo
*info
)
2518 struct mdinfo
*sra
, *sd
;
2519 /* Initialisation to silence compiler warning */
2520 unsigned long long min_space_before
= 0, min_space_after
= 0;
2523 sra
= sysfs_read(fd
, NULL
, GET_DEVS
);
2526 for (sd
= sra
->devs
; sd
; sd
= sd
->next
) {
2529 struct supertype
*st2
;
2530 struct mdinfo info2
;
2532 if (sd
->disk
.state
& (1<<MD_DISK_FAULTY
))
2534 dn
= map_dev(sd
->disk
.major
, sd
->disk
.minor
, 0);
2535 dfd
= dev_open(dn
, O_RDONLY
);
2538 st2
= dup_super(st
);
2539 if (st2
->ss
->load_super(st2
,dfd
, NULL
)) {
2545 st2
->ss
->getinfo_super(st2
, &info2
, NULL
);
2546 st2
->ss
->free_super(st2
);
2549 min_space_before
> info2
.space_before
)
2550 min_space_before
= info2
.space_before
;
2552 min_space_after
> info2
.space_after
)
2553 min_space_after
= info2
.space_after
;
2556 if (sd
== NULL
&& !first
) {
2557 info
->space_after
= min_space_after
;
2558 info
->space_before
= min_space_before
;
2563 static void update_cache_size(char *container
, struct mdinfo
*sra
,
2564 struct mdinfo
*info
,
2565 int disks
, unsigned long long blocks
)
2567 /* Check that the internal stripe cache is
2568 * large enough, or it won't work.
2569 * It must hold at least 4 stripes of the larger
2572 unsigned long cache
;
2573 cache
= max(info
->array
.chunk_size
, info
->new_chunk
);
2574 cache
*= 4; /* 4 stripes minimum */
2575 cache
/= 512; /* convert to sectors */
2576 /* make sure there is room for 'blocks' with a bit to spare */
2577 if (cache
< 16 + blocks
/ disks
)
2578 cache
= 16 + blocks
/ disks
;
2579 cache
/= (4096/512); /* Covert from sectors to pages */
2581 if (sra
->cache_size
< cache
)
2582 subarray_set_num(container
, sra
, "stripe_cache_size",
2586 static int impose_reshape(struct mdinfo
*sra
,
2587 struct mdinfo
*info
,
2588 struct supertype
*st
,
2591 char *devname
, char *container
,
2592 struct reshape
*reshape
)
2594 struct mdu_array_info_s array
;
2596 sra
->new_chunk
= info
->new_chunk
;
2599 /* for external metadata checkpoint saved by mdmon can be lost
2600 * or missed /due to e.g. crash/. Check if md is not during
2601 * restart farther than metadata points to.
2602 * If so, this means metadata information is obsolete.
2604 if (st
->ss
->external
)
2605 verify_reshape_position(info
, reshape
->level
);
2606 sra
->reshape_progress
= info
->reshape_progress
;
2608 sra
->reshape_progress
= 0;
2609 if (reshape
->after
.data_disks
< reshape
->before
.data_disks
)
2610 /* start from the end of the new array */
2611 sra
->reshape_progress
= (sra
->component_size
2612 * reshape
->after
.data_disks
);
2615 ioctl(fd
, GET_ARRAY_INFO
, &array
);
2616 if (info
->array
.chunk_size
== info
->new_chunk
&&
2617 reshape
->before
.layout
== reshape
->after
.layout
&&
2618 st
->ss
->external
== 0) {
2619 /* use SET_ARRAY_INFO but only if reshape hasn't started */
2620 array
.raid_disks
= reshape
->after
.data_disks
+ reshape
->parity
;
2622 ioctl(fd
, SET_ARRAY_INFO
, &array
) != 0) {
2625 pr_err("Cannot set device shape for %s: %s\n",
2626 devname
, strerror(errno
));
2629 (array
.state
& (1<<MD_SB_BITMAP_PRESENT
)))
2630 cont_err("Bitmap must be removed before"
2631 " shape can be changed\n");
2635 } else if (!restart
) {
2636 /* set them all just in case some old 'new_*' value
2637 * persists from some earlier problem.
2640 if (sysfs_set_num(sra
, NULL
, "chunk_size", info
->new_chunk
) < 0)
2642 if (!err
&& sysfs_set_num(sra
, NULL
, "layout",
2643 reshape
->after
.layout
) < 0)
2645 if (!err
&& subarray_set_num(container
, sra
, "raid_disks",
2646 reshape
->after
.data_disks
+
2647 reshape
->parity
) < 0)
2650 pr_err("Cannot set device shape for %s\n",
2654 (array
.state
& (1<<MD_SB_BITMAP_PRESENT
)))
2655 cont_err("Bitmap must be removed before"
2656 " shape can be changed\n");
2665 static int impose_level(int fd
, int level
, char *devname
, int verbose
)
2668 struct mdu_array_info_s array
;
2670 sysfs_init(&info
, fd
, NULL
);
2672 ioctl(fd
, GET_ARRAY_INFO
, &array
);
2674 (array
.level
>= 4 && array
.level
<= 6)) {
2675 /* To convert to RAID0 we need to fail and
2676 * remove any non-data devices. */
2679 int data_disks
= array
.raid_disks
- 1;
2680 if (array
.level
== 6)
2682 if (array
.level
== 5 &&
2683 array
.layout
!= ALGORITHM_PARITY_N
)
2685 if (array
.level
== 6 &&
2686 array
.layout
!= ALGORITHM_PARITY_N_6
)
2688 sysfs_set_str(&info
, NULL
,"sync_action", "idle");
2689 /* First remove any spares so no recovery starts */
2690 for (d
= 0, found
= 0;
2691 d
< MAX_DISKS
&& found
< array
.nr_disks
;
2693 mdu_disk_info_t disk
;
2695 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0)
2697 if (disk
.major
== 0 && disk
.minor
== 0)
2700 if ((disk
.state
& (1 << MD_DISK_ACTIVE
))
2701 && disk
.raid_disk
< data_disks
)
2704 ioctl(fd
, HOT_REMOVE_DISK
,
2705 makedev(disk
.major
, disk
.minor
));
2707 /* Now fail anything left */
2708 ioctl(fd
, GET_ARRAY_INFO
, &array
);
2709 for (d
= 0, found
= 0;
2710 d
< MAX_DISKS
&& found
< array
.nr_disks
;
2713 mdu_disk_info_t disk
;
2715 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0)
2717 if (disk
.major
== 0 && disk
.minor
== 0)
2720 if ((disk
.state
& (1 << MD_DISK_ACTIVE
))
2721 && disk
.raid_disk
< data_disks
)
2724 ioctl(fd
, SET_DISK_FAULTY
,
2725 makedev(disk
.major
, disk
.minor
));
2727 while (ioctl(fd
, HOT_REMOVE_DISK
,
2728 makedev(disk
.major
, disk
.minor
)) < 0
2735 c
= map_num(pers
, level
);
2737 int err
= sysfs_set_str(&info
, NULL
, "level", c
);
2740 pr_err("%s: could not set level to %s\n",
2743 (array
.state
& (1<<MD_SB_BITMAP_PRESENT
)))
2744 cont_err("Bitmap must be removed"
2745 " before level can be changed\n");
2749 pr_err("level of %s changed to %s\n",
2756 static void catch_term(int sig
)
2761 static int continue_via_systemd(char *devnm
)
2763 int skipped
, i
, pid
, status
;
2765 /* In a systemd/udev world, it is best to get systemd to
2766 * run "mdadm --grow --continue" rather than running in the
2771 /* FIXME yuk. CLOSE_EXEC?? */
2773 for (i
= 3; skipped
< 20; i
++)
2779 /* Don't want to see error messages from
2780 * systemctl. If the service doesn't exist,
2781 * we fork ourselves.
2784 open("/dev/null", O_WRONLY
);
2785 snprintf(pathbuf
, sizeof(pathbuf
), "mdadm-grow-continue@%s.service",
2787 status
= execl("/usr/bin/systemctl", "systemctl",
2790 status
= execl("/bin/systemctl", "systemctl", "start",
2793 case -1: /* Just do it ourselves. */
2795 default: /* parent - good */
2796 pid
= wait(&status
);
2797 if (pid
>= 0 && status
== 0)
2803 static int reshape_array(char *container
, int fd
, char *devname
,
2804 struct supertype
*st
, struct mdinfo
*info
,
2805 int force
, struct mddev_dev
*devlist
,
2806 unsigned long long data_offset
,
2807 char *backup_file
, int verbose
, int forked
,
2808 int restart
, int freeze_reshape
)
2810 struct reshape reshape
;
2813 int orig_level
= UnSet
;
2817 struct mdu_array_info_s array
;
2820 struct mddev_dev
*dv
;
2824 unsigned long long *offsets
= NULL
;
2828 unsigned long blocks
;
2829 unsigned long long array_size
;
2831 struct mdinfo
*sra
= NULL
;
2834 /* when reshaping a RAID0, the component_size might be zero.
2835 * So try to fix that up.
2837 if (ioctl(fd
, GET_ARRAY_INFO
, &array
) != 0) {
2838 dprintf("Cannot get array information.\n");
2841 if (array
.level
== 0 && info
->component_size
== 0) {
2842 get_dev_size(fd
, NULL
, &array_size
);
2843 info
->component_size
= array_size
/ array
.raid_disks
;
2846 if (array
.level
== 10)
2847 /* Need space_after info */
2848 get_space_after(fd
, st
, info
);
2850 if (info
->reshape_active
) {
2851 int new_level
= info
->new_level
;
2852 info
->new_level
= UnSet
;
2853 if (info
->delta_disks
> 0)
2854 info
->array
.raid_disks
-= info
->delta_disks
;
2855 msg
= analyse_change(devname
, info
, &reshape
);
2856 info
->new_level
= new_level
;
2857 if (info
->delta_disks
> 0)
2858 info
->array
.raid_disks
+= info
->delta_disks
;
2860 /* Make sure the array isn't read-only */
2861 ioctl(fd
, RESTART_ARRAY_RW
, 0);
2863 msg
= analyse_change(devname
, info
, &reshape
);
2865 /* if msg == "", error has already been printed */
2867 pr_err("%s\n", msg
);
2871 (reshape
.level
!= info
->array
.level
||
2872 reshape
.before
.layout
!= info
->array
.layout
||
2873 reshape
.before
.data_disks
+ reshape
.parity
2874 != info
->array
.raid_disks
- max(0, info
->delta_disks
))) {
2875 pr_err("reshape info is not in native format -"
2876 " cannot continue.\n");
2880 if (st
->ss
->external
&& restart
&& (info
->reshape_progress
== 0) &&
2881 !((sysfs_get_str(info
, NULL
, "sync_action", buf
, sizeof(buf
)) > 0) &&
2882 (strncmp(buf
, "reshape", 7) == 0))) {
2883 /* When reshape is restarted from '0', very begin of array
2884 * it is possible that for external metadata reshape and array
2885 * configuration doesn't happen.
2886 * Check if md has the same opinion, and reshape is restarted
2887 * from 0. If so, this is regular reshape start after reshape
2888 * switch in metadata to next array only.
2890 if ((verify_reshape_position(info
, reshape
.level
) >= 0) &&
2891 (info
->reshape_progress
== 0))
2895 /* reshape already started. just skip to monitoring the reshape */
2896 if (reshape
.backup_blocks
== 0)
2898 if (restart
& RESHAPE_NO_BACKUP
)
2901 /* Need 'sra' down at 'started:' */
2902 sra
= sysfs_read(fd
, NULL
,
2903 GET_COMPONENT
|GET_DEVS
|GET_OFFSET
|GET_STATE
|GET_CHUNK
|
2906 pr_err("%s: Cannot get array details from sysfs\n",
2912 backup_file
= locate_backup(sra
->sys_name
);
2916 /* The container is frozen but the array may not be.
2917 * So freeze the array so spares don't get put to the wrong use
2918 * FIXME there should probably be a cleaner separation between
2919 * freeze_array and freeze_container.
2921 sysfs_freeze_array(info
);
2922 /* Check we have enough spares to not be degraded */
2924 for (dv
= devlist
; dv
; dv
=dv
->next
)
2926 spares_needed
= max(reshape
.before
.data_disks
,
2927 reshape
.after
.data_disks
)
2928 + reshape
.parity
- array
.raid_disks
;
2931 info
->new_level
> 1 && info
->array
.level
> 1 &&
2932 spares_needed
> info
->array
.spare_disks
+ added_disks
) {
2933 pr_err("Need %d spare%s to avoid degraded array,"
2934 " and only have %d.\n"
2935 " Use --force to over-ride this check.\n",
2937 spares_needed
== 1 ? "" : "s",
2938 info
->array
.spare_disks
+ added_disks
);
2941 /* Check we have enough spares to not fail */
2942 spares_needed
= max(reshape
.before
.data_disks
,
2943 reshape
.after
.data_disks
)
2945 if ((info
->new_level
> 1 || info
->new_level
== 0) &&
2946 spares_needed
> info
->array
.spare_disks
+added_disks
) {
2947 pr_err("Need %d spare%s to create working array,"
2948 " and only have %d.\n",
2950 spares_needed
== 1 ? "" : "s",
2951 info
->array
.spare_disks
+ added_disks
);
2955 if (reshape
.level
!= array
.level
) {
2956 int err
= impose_level(fd
, reshape
.level
, devname
, verbose
);
2959 info
->new_layout
= UnSet
; /* after level change,
2960 * layout is meaningless */
2961 orig_level
= array
.level
;
2962 sysfs_freeze_array(info
);
2964 if (reshape
.level
> 0 && st
->ss
->external
) {
2965 /* make sure mdmon is aware of the new level */
2966 if (mdmon_running(container
))
2967 flush_mdmon(container
);
2969 if (!mdmon_running(container
))
2970 start_mdmon(container
);
2971 ping_monitor(container
);
2972 if (mdmon_running(container
) &&
2973 st
->update_tail
== NULL
)
2974 st
->update_tail
= &st
->updates
;
2977 /* ->reshape_super might have chosen some spares from the
2978 * container that it wants to be part of the new array.
2979 * We can collect them with ->container_content and give
2980 * them to the kernel.
2982 if (st
->ss
->reshape_super
&& st
->ss
->container_content
) {
2983 char *subarray
= strchr(info
->text_version
+1, '/')+1;
2984 struct mdinfo
*info2
=
2985 st
->ss
->container_content(st
, subarray
);
2989 sysfs_init(info2
, fd
, st
->devnm
);
2990 /* When increasing number of devices, we need to set
2991 * new raid_disks before adding these, or they might
2994 if (reshape
.backup_blocks
&&
2995 reshape
.after
.data_disks
> reshape
.before
.data_disks
)
2996 subarray_set_num(container
, info2
, "raid_disks",
2997 reshape
.after
.data_disks
+
2999 for (d
= info2
->devs
; d
; d
= d
->next
) {
3000 if (d
->disk
.state
== 0 &&
3001 d
->disk
.raid_disk
>= 0) {
3002 /* This is a spare that wants to
3003 * be part of the array.
3005 add_disk(fd
, st
, info2
, d
);
3011 /* We might have been given some devices to add to the
3012 * array. Now that the array has been changed to the right
3013 * level and frozen, we can safely add them.
3016 Manage_subdevs(devname
, fd
, devlist
, verbose
,
3019 if (reshape
.backup_blocks
== 0 && data_offset
!= INVALID_SECTORS
)
3020 reshape
.backup_blocks
= reshape
.before
.data_disks
* info
->array
.chunk_size
/512;
3021 if (reshape
.backup_blocks
== 0) {
3022 /* No restriping needed, but we might need to impose
3023 * some more changes: layout, raid_disks, chunk_size
3025 /* read current array info */
3026 if (ioctl(fd
, GET_ARRAY_INFO
, &array
) != 0) {
3027 dprintf("Cannot get array information.\n");
3030 /* compare current array info with new values and if
3031 * it is different update them to new */
3032 if (info
->new_layout
!= UnSet
&&
3033 info
->new_layout
!= array
.layout
) {
3034 array
.layout
= info
->new_layout
;
3035 if (ioctl(fd
, SET_ARRAY_INFO
, &array
) != 0) {
3036 pr_err("failed to set new layout\n");
3038 } else if (verbose
>= 0)
3039 printf("layout for %s set to %d\n",
3040 devname
, array
.layout
);
3042 if (info
->delta_disks
!= UnSet
&&
3043 info
->delta_disks
!= 0 &&
3044 array
.raid_disks
!= (info
->array
.raid_disks
+ info
->delta_disks
)) {
3045 array
.raid_disks
+= info
->delta_disks
;
3046 if (ioctl(fd
, SET_ARRAY_INFO
, &array
) != 0) {
3047 pr_err("failed to set raid disks\n");
3049 } else if (verbose
>= 0) {
3050 printf("raid_disks for %s set to %d\n",
3051 devname
, array
.raid_disks
);
3054 if (info
->new_chunk
!= 0 &&
3055 info
->new_chunk
!= array
.chunk_size
) {
3056 if (sysfs_set_num(info
, NULL
,
3057 "chunk_size", info
->new_chunk
) != 0) {
3058 pr_err("failed to set chunk size\n");
3060 } else if (verbose
>= 0)
3061 printf("chunk size for %s set to %d\n",
3062 devname
, array
.chunk_size
);
3069 * There are three possibilities.
3070 * 1/ The array will shrink.
3071 * We need to ensure the reshape will pause before reaching
3072 * the 'critical section'. We also need to fork and wait for
3073 * that to happen. When it does we
3074 * suspend/backup/complete/unfreeze
3076 * 2/ The array will not change size.
3077 * This requires that we keep a backup of a sliding window
3078 * so that we can restore data after a crash. So we need
3079 * to fork and monitor progress.
3080 * In future we will allow the data_offset to change, so
3081 * a sliding backup becomes unnecessary.
3083 * 3/ The array will grow. This is relatively easy.
3084 * However the kernel's restripe routines will cheerfully
3085 * overwrite some early data before it is safe. So we
3086 * need to make a backup of the early parts of the array
3087 * and be ready to restore it if rebuild aborts very early.
3088 * For externally managed metadata, we still need a forked
3089 * child to monitor the reshape and suspend IO over the region
3090 * that is being reshaped.
3092 * We backup data by writing it to one spare, or to a
3093 * file which was given on command line.
3095 * In each case, we first make sure that storage is available
3096 * for the required backup.
3098 * - request the shape change.
3099 * - fork to handle backup etc.
3101 /* Check that we can hold all the data */
3102 get_dev_size(fd
, NULL
, &array_size
);
3103 if (reshape
.new_size
< (array_size
/512)) {
3104 pr_err("this change will reduce the size of the array.\n"
3105 " use --grow --array-size first to truncate array.\n"
3106 " e.g. mdadm --grow %s --array-size %llu\n",
3107 devname
, reshape
.new_size
/2);
3111 if (array
.level
== 10) {
3112 /* Reshaping RAID10 does not require any data backup by
3113 * user-space. Instead it requires that the data_offset
3114 * is changed to avoid the need for backup.
3115 * So this is handled very separately
3118 /* Nothing to do. */
3120 return raid10_reshape(container
, fd
, devname
, st
, info
,
3121 &reshape
, data_offset
,
3124 sra
= sysfs_read(fd
, NULL
,
3125 GET_COMPONENT
|GET_DEVS
|GET_OFFSET
|GET_STATE
|GET_CHUNK
|
3128 pr_err("%s: Cannot get array details from sysfs\n",
3134 switch(set_new_data_offset(sra
, st
, devname
,
3135 reshape
.after
.data_disks
- reshape
.before
.data_disks
,
3137 reshape
.min_offset_change
, 1)) {
3141 /* Updated data_offset, so it's easy now */
3142 update_cache_size(container
, sra
, info
,
3143 min(reshape
.before
.data_disks
,
3144 reshape
.after
.data_disks
),
3145 reshape
.backup_blocks
);
3147 /* Right, everything seems fine. Let's kick things off.
3151 if (impose_reshape(sra
, info
, st
, fd
, restart
,
3152 devname
, container
, &reshape
) < 0)
3154 if (sysfs_set_str(sra
, NULL
, "sync_action", "reshape") < 0) {
3155 pr_err("Failed to initiate reshape!\n");
3158 if (info
->new_level
== reshape
.level
)
3160 /* need to adjust level when reshape completes */
3162 case -1: /* ignore error, but don't wait */
3164 default: /* parent */
3172 fd
= open_dev(sra
->sys_name
);
3174 impose_level(fd
, info
->new_level
, devname
, verbose
);
3176 case 1: /* Couldn't set data_offset, try the old way */
3177 if (data_offset
!= INVALID_SECTORS
) {
3178 pr_err("Cannot update data_offset on this array\n");
3185 /* Decide how many blocks (sectors) for a reshape
3186 * unit. The number we have so far is just a minimum
3188 blocks
= reshape
.backup_blocks
;
3189 if (reshape
.before
.data_disks
==
3190 reshape
.after
.data_disks
) {
3191 /* Make 'blocks' bigger for better throughput, but
3192 * not so big that we reject it below.
3193 * Try for 16 megabytes
3195 while (blocks
* 32 < sra
->component_size
&&
3199 pr_err("Need to backup %luK of critical "
3200 "section..\n", blocks
/2);
3202 if (blocks
>= sra
->component_size
/2) {
3203 pr_err("%s: Something wrong"
3204 " - reshape aborted\n",
3209 /* Now we need to open all these devices so we can read/write.
3211 nrdisks
= max(reshape
.before
.data_disks
,
3212 reshape
.after
.data_disks
) + reshape
.parity
3213 + sra
->array
.spare_disks
;
3214 fdlist
= xcalloc((1+nrdisks
), sizeof(int));
3215 offsets
= xcalloc((1+nrdisks
), sizeof(offsets
[0]));
3217 odisks
= reshape
.before
.data_disks
+ reshape
.parity
;
3218 d
= reshape_prepare_fdlist(devname
, sra
, odisks
,
3219 nrdisks
, blocks
, backup_file
,
3224 if ((st
->ss
->manage_reshape
== NULL
) ||
3225 (st
->ss
->recover_backup
== NULL
)) {
3226 if (backup_file
== NULL
) {
3227 if (reshape
.after
.data_disks
<=
3228 reshape
.before
.data_disks
) {
3229 pr_err("%s: Cannot grow - need backup-file\n",
3231 pr_err(" Please provide one with \"--backup=...\"\n");
3233 } else if (sra
->array
.spare_disks
== 0) {
3234 pr_err("%s: Cannot grow - "
3235 "need a spare or backup-file to backup "
3236 "critical section\n", devname
);
3240 if (!reshape_open_backup_file(backup_file
, fd
, devname
,
3242 fdlist
+d
, offsets
+d
,
3251 update_cache_size(container
, sra
, info
,
3252 min(reshape
.before
.data_disks
, reshape
.after
.data_disks
),
3255 /* Right, everything seems fine. Let's kick things off.
3256 * If only changing raid_disks, use ioctl, else use
3261 if (impose_reshape(sra
, info
, st
, fd
, restart
,
3262 devname
, container
, &reshape
) < 0)
3265 err
= start_reshape(sra
, restart
, reshape
.before
.data_disks
,
3266 reshape
.after
.data_disks
);
3268 pr_err("Cannot %s reshape for %s\n",
3269 restart
? "continue" : "start",
3274 sysfs_set_str(sra
, NULL
, "array_state", "active");
3275 if (freeze_reshape
) {
3279 pr_err("Reshape has to be continued from"
3280 " location %llu when root filesystem has been mounted.\n",
3281 sra
->reshape_progress
);
3285 if (!forked
&& !check_env("MDADM_NO_SYSTEMCTL"))
3286 if (continue_via_systemd(container
?: sra
->sys_name
)) {
3293 /* Now we just need to kick off the reshape and watch, while
3294 * handling backups of the data...
3295 * This is all done by a forked background process.
3297 switch(forked
? 0 : fork()) {
3299 pr_err("Cannot run child to monitor reshape: %s\n",
3313 /* If another array on the same devices is busy, the
3314 * reshape will wait for them. This would mean that
3315 * the first section that we suspend will stay suspended
3316 * for a long time. So check on that possibility
3317 * by looking for "DELAYED" in /proc/mdstat, and if found,
3321 struct mdstat_ent
*mds
, *m
;
3323 mds
= mdstat_read(1, 0);
3324 for (m
= mds
; m
; m
= m
->next
)
3325 if (strcmp(m
->devnm
, sra
->sys_name
) == 0) {
3327 m
->percent
== RESYNC_DELAYED
)
3330 /* Haven't started the reshape thread
3337 if (delayed
== 1 && get_linux_version() < 3007000) {
3338 pr_err("Reshape is delayed, but cannot wait carefully with this kernel.\n"
3339 " You might experience problems until other reshapes complete.\n");
3343 mdstat_wait(30 - (delayed
-1) * 25);
3347 if (check_env("MDADM_GROW_VERIFY"))
3348 fd
= open(devname
, O_RDONLY
| O_DIRECT
);
3351 mlockall(MCL_FUTURE
);
3353 signal(SIGTERM
, catch_term
);
3355 if (st
->ss
->external
) {
3356 /* metadata handler takes it from here */
3357 done
= st
->ss
->manage_reshape(
3358 fd
, sra
, &reshape
, st
, blocks
,
3360 d
- odisks
, fdlist
+odisks
,
3363 done
= child_monitor(
3364 fd
, sra
, &reshape
, st
, blocks
,
3366 d
- odisks
, fdlist
+odisks
,
3372 if (backup_file
&& done
) {
3374 bul
= make_backup(sra
->sys_name
);
3377 int l
= readlink(bul
, buf
, sizeof(buf
));
3385 unlink(backup_file
);
3392 if (!st
->ss
->external
&&
3393 !(reshape
.before
.data_disks
!= reshape
.after
.data_disks
3394 && info
->custom_array_size
) &&
3395 info
->new_level
== reshape
.level
&&
3397 /* no need to wait for the reshape to finish as
3398 * there is nothing more to do.
3405 if (st
->ss
->external
) {
3406 /* Re-load the metadata as much could have changed */
3407 int cfd
= open_dev(st
->container_devnm
);
3409 flush_mdmon(container
);
3410 st
->ss
->free_super(st
);
3411 st
->ss
->load_container(st
, cfd
, container
);
3416 /* set new array size if required customer_array_size is used
3419 if (reshape
.before
.data_disks
!=
3420 reshape
.after
.data_disks
&&
3421 info
->custom_array_size
)
3422 set_array_size(st
, info
, info
->text_version
);
3424 if (info
->new_level
!= reshape
.level
) {
3426 fd
= open(devname
, O_RDONLY
);
3427 impose_level(fd
, info
->new_level
, devname
, verbose
);
3429 if (info
->new_level
== 0)
3430 st
->update_tail
= NULL
;
3442 if (orig_level
!= UnSet
&& sra
) {
3443 c
= map_num(pers
, orig_level
);
3444 if (c
&& sysfs_set_str(sra
, NULL
, "level", c
) == 0)
3445 pr_err("aborting level change\n");
3453 /* mdfd handle is passed to be closed in child process (after fork).
3455 int reshape_container(char *container
, char *devname
,
3457 struct supertype
*st
,
3458 struct mdinfo
*info
,
3460 char *backup_file
, int verbose
,
3461 int forked
, int restart
, int freeze_reshape
)
3463 struct mdinfo
*cc
= NULL
;
3465 char last_devnm
[32] = "";
3467 /* component_size is not meaningful for a container,
3468 * so pass '0' meaning 'no change'
3471 reshape_super(st
, 0, info
->new_level
,
3472 info
->new_layout
, info
->new_chunk
,
3473 info
->array
.raid_disks
, info
->delta_disks
,
3474 backup_file
, devname
, APPLY_METADATA_CHANGES
,
3482 /* ping monitor to be sure that update is on disk
3484 ping_monitor(container
);
3486 if (!forked
&& !freeze_reshape
&& !check_env("MDADM_NO_SYSTEMCTL"))
3487 if (continue_via_systemd(container
))
3490 switch (forked
? 0 : fork()) {
3491 case -1: /* error */
3492 perror("Cannot fork to complete reshape\n");
3495 default: /* parent */
3496 if (!freeze_reshape
)
3497 printf("%s: multi-array reshape continues"
3498 " in background\n", Name
);
3505 /* close unused handle in child process
3511 /* For each member array with reshape_active,
3512 * we need to perform the reshape.
3513 * We pick the first array that needs reshaping and
3514 * reshape it. reshape_array() will re-read the metadata
3515 * so the next time through a different array should be
3516 * ready for reshape.
3517 * It is possible that the 'different' array will not
3518 * be assembled yet. In that case we simple exit.
3519 * When it is assembled, the mdadm which assembles it
3520 * will take over the reshape.
3522 struct mdinfo
*content
;
3524 struct mdstat_ent
*mdstat
;
3530 cc
= st
->ss
->container_content(st
, NULL
);
3532 for (content
= cc
; content
; content
= content
->next
) {
3534 if (!content
->reshape_active
)
3537 subarray
= strchr(content
->text_version
+1, '/')+1;
3538 mdstat
= mdstat_by_subdev(subarray
, container
);
3541 if (mdstat
->active
== 0) {
3542 pr_err("Skipping inactive array %s.\n",
3544 free_mdstat(mdstat
);
3553 devid
= devnm2devid(mdstat
->devnm
);
3554 adev
= map_dev(major(devid
), minor(devid
), 0);
3556 adev
= content
->text_version
;
3558 fd
= open_dev(mdstat
->devnm
);
3560 printf("%s: Device %s cannot be opened for reshape.",
3565 if (strcmp(last_devnm
, mdstat
->devnm
) == 0) {
3566 /* Do not allow for multiple reshape_array() calls for
3568 * It can happen when reshape_array() returns without
3569 * error, when reshape is not finished (wrong reshape
3570 * starting/continuation conditions). Mdmon doesn't
3571 * switch to next array in container and reentry
3572 * conditions for the same array occur.
3573 * This is possibly interim until the behaviour of
3574 * reshape_array is resolved().
3576 printf("%s: Multiple reshape execution detected for "
3577 "device %s.", Name
, adev
);
3581 strcpy(last_devnm
, mdstat
->devnm
);
3583 sysfs_init(content
, fd
, mdstat
->devnm
);
3585 if (mdmon_running(container
))
3586 flush_mdmon(container
);
3588 rv
= reshape_array(container
, fd
, adev
, st
,
3589 content
, force
, NULL
, INVALID_SECTORS
,
3590 backup_file
, verbose
, 1, restart
,
3594 if (freeze_reshape
) {
3603 if (mdmon_running(container
))
3604 flush_mdmon(container
);
3613 * We run a child process in the background which performs the following
3615 * - wait for resync to reach a certain point
3616 * - suspend io to the following section
3617 * - backup that section
3618 * - allow resync to proceed further
3620 * - discard the backup.
3622 * When are combined in slightly different ways in the three cases.
3624 * - suspend/backup/allow/wait/resume/discard
3626 * - allow/wait/suspend/backup/allow/wait/resume/discard
3628 * - wait/resume/discard/suspend/backup/allow
3630 * suspend/backup/allow always come together
3631 * wait/resume/discard do too.
3632 * For the same-size case we have two backups to improve flow.
3636 int progress_reshape(struct mdinfo
*info
, struct reshape
*reshape
,
3637 unsigned long long backup_point
,
3638 unsigned long long wait_point
,
3639 unsigned long long *suspend_point
,
3640 unsigned long long *reshape_completed
, int *frozen
)
3642 /* This function is called repeatedly by the reshape manager.
3643 * It determines how much progress can safely be made and allows
3645 * - 'info' identifies the array and particularly records in
3646 * ->reshape_progress the metadata's knowledge of progress
3647 * This is a sector offset from the start of the array
3648 * of the next array block to be relocated. This number
3649 * may increase from 0 or decrease from array_size, depending
3650 * on the type of reshape that is happening.
3651 * Note that in contrast, 'sync_completed' is a block count of the
3652 * reshape so far. It gives the distance between the start point
3653 * (head or tail of device) and the next place that data will be
3654 * written. It always increases.
3655 * - 'reshape' is the structure created by analyse_change
3656 * - 'backup_point' shows how much the metadata manager has backed-up
3657 * data. For reshapes with increasing progress, it is the next address
3658 * to be backed up, previous addresses have been backed-up. For
3659 * decreasing progress, it is the earliest address that has been
3660 * backed up - later address are also backed up.
3661 * So addresses between reshape_progress and backup_point are
3662 * backed up providing those are in the 'correct' order.
3663 * - 'wait_point' is an array address. When reshape_completed
3664 * passes this point, progress_reshape should return. It might
3665 * return earlier if it determines that ->reshape_progress needs
3666 * to be updated or further backup is needed.
3667 * - suspend_point is maintained by progress_reshape and the caller
3668 * should not touch it except to initialise to zero.
3669 * It is an array address and it only increases in 2.6.37 and earlier.
3670 * This makes it difficult to handle reducing reshapes with
3671 * external metadata.
3672 * However: it is similar to backup_point in that it records the
3673 * other end of a suspended region from reshape_progress.
3674 * it is moved to extend the region that is safe to backup and/or
3676 * - reshape_completed is read from sysfs and returned. The caller
3677 * should copy this into ->reshape_progress when it has reason to
3678 * believe that the metadata knows this, and any backup outside this
3682 * 1 if more data from backup_point - but only as far as suspend_point,
3683 * should be backed up
3684 * 0 if things are progressing smoothly
3685 * -1 if the reshape is finished because it is all done,
3686 * -2 if the reshape is finished due to an error.
3689 int advancing
= (reshape
->after
.data_disks
3690 >= reshape
->before
.data_disks
);
3691 unsigned long long need_backup
; /* All data between start of array and
3692 * here will at some point need to
3695 unsigned long long read_offset
, write_offset
;
3696 unsigned long long write_range
;
3697 unsigned long long max_progress
, target
, completed
;
3698 unsigned long long array_size
= (info
->component_size
3699 * reshape
->before
.data_disks
);
3703 /* First, we unsuspend any region that is now known to be safe.
3704 * If suspend_point is on the 'wrong' side of reshape_progress, then
3705 * we don't have or need suspension at the moment. This is true for
3706 * native metadata when we don't need to back-up.
3709 if (info
->reshape_progress
<= *suspend_point
)
3710 sysfs_set_num(info
, NULL
, "suspend_lo",
3711 info
->reshape_progress
);
3713 /* Note: this won't work in 2.6.37 and before.
3714 * Something somewhere should make sure we don't need it!
3716 if (info
->reshape_progress
>= *suspend_point
)
3717 sysfs_set_num(info
, NULL
, "suspend_hi",
3718 info
->reshape_progress
);
3721 /* Now work out how far it is safe to progress.
3722 * If the read_offset for ->reshape_progress is less than
3723 * 'blocks' beyond the write_offset, we can only progress as far
3725 * Otherwise we can progress until the write_offset for the new location
3726 * reaches (within 'blocks' of) the read_offset at the current location.
3727 * However that region must be suspended unless we are using native
3729 * If we need to suspend more, we limit it to 128M per device, which is
3730 * rather arbitrary and should be some time-based calculation.
3732 read_offset
= info
->reshape_progress
/ reshape
->before
.data_disks
;
3733 write_offset
= info
->reshape_progress
/ reshape
->after
.data_disks
;
3734 write_range
= info
->new_chunk
/512;
3735 if (reshape
->before
.data_disks
== reshape
->after
.data_disks
)
3736 need_backup
= array_size
;
3738 need_backup
= reshape
->backup_blocks
;
3740 if (read_offset
< write_offset
+ write_range
)
3741 max_progress
= backup_point
;
3745 reshape
->after
.data_disks
;
3747 if (read_offset
> write_offset
- write_range
)
3748 /* Can only progress as far as has been backed up,
3749 * which must be suspended */
3750 max_progress
= backup_point
;
3751 else if (info
->reshape_progress
<= need_backup
)
3752 max_progress
= backup_point
;
3754 if (info
->array
.major_version
>= 0)
3755 /* Can progress until backup is needed */
3756 max_progress
= need_backup
;
3758 /* Can progress until metadata update is required */
3761 reshape
->after
.data_disks
;
3762 /* but data must be suspended */
3763 if (max_progress
< *suspend_point
)
3764 max_progress
= *suspend_point
;
3769 /* We know it is safe to progress to 'max_progress' providing
3770 * it is suspended or we are using native metadata.
3771 * Consider extending suspend_point 128M per device if it
3772 * is less than 64M per device beyond reshape_progress.
3773 * But always do a multiple of 'blocks'
3774 * FIXME this is too big - it takes to long to complete
3777 target
= 64*1024*2 * min(reshape
->before
.data_disks
,
3778 reshape
->after
.data_disks
);
3779 target
/= reshape
->backup_blocks
;
3782 target
*= reshape
->backup_blocks
;
3784 /* For externally managed metadata we always need to suspend IO to
3785 * the area being reshaped so we regularly push suspend_point forward.
3786 * For native metadata we only need the suspend if we are going to do
3790 if ((need_backup
> info
->reshape_progress
3791 || info
->array
.major_version
< 0) &&
3792 *suspend_point
< info
->reshape_progress
+ target
) {
3793 if (need_backup
< *suspend_point
+ 2 * target
)
3794 *suspend_point
= need_backup
;
3795 else if (*suspend_point
+ 2 * target
< array_size
)
3796 *suspend_point
+= 2 * target
;
3798 *suspend_point
= array_size
;
3799 sysfs_set_num(info
, NULL
, "suspend_hi", *suspend_point
);
3800 if (max_progress
> *suspend_point
)
3801 max_progress
= *suspend_point
;
3804 if (info
->array
.major_version
>= 0) {
3805 /* Only need to suspend when about to backup */
3806 if (info
->reshape_progress
< need_backup
* 2 &&
3807 *suspend_point
> 0) {
3809 sysfs_set_num(info
, NULL
, "suspend_lo", 0);
3810 sysfs_set_num(info
, NULL
, "suspend_hi", need_backup
);
3813 /* Need to suspend continually */
3814 if (info
->reshape_progress
< *suspend_point
)
3815 *suspend_point
= info
->reshape_progress
;
3816 if (*suspend_point
+ target
< info
->reshape_progress
)
3817 /* No need to move suspend region yet */;
3819 if (*suspend_point
>= 2 * target
)
3820 *suspend_point
-= 2 * target
;
3823 sysfs_set_num(info
, NULL
, "suspend_lo",
3826 if (max_progress
< *suspend_point
)
3827 max_progress
= *suspend_point
;
3831 /* now set sync_max to allow that progress. sync_max, like
3832 * sync_completed is a count of sectors written per device, so
3833 * we find the difference between max_progress and the start point,
3834 * and divide that by after.data_disks to get a sync_max
3836 * At the same time we convert wait_point to a similar number
3837 * for comparing against sync_completed.
3839 /* scale down max_progress to per_disk */
3840 max_progress
/= reshape
->after
.data_disks
;
3841 /* Round to chunk size as some kernels give an erroneously high number */
3842 max_progress
/= info
->new_chunk
/512;
3843 max_progress
*= info
->new_chunk
/512;
3844 /* And round to old chunk size as the kernel wants that */
3845 max_progress
/= info
->array
.chunk_size
/512;
3846 max_progress
*= info
->array
.chunk_size
/512;
3847 /* Limit progress to the whole device */
3848 if (max_progress
> info
->component_size
)
3849 max_progress
= info
->component_size
;
3850 wait_point
/= reshape
->after
.data_disks
;
3852 /* switch from 'device offset' to 'processed block count' */
3853 max_progress
= info
->component_size
- max_progress
;
3854 wait_point
= info
->component_size
- wait_point
;
3858 sysfs_set_num(info
, NULL
, "sync_max", max_progress
);
3860 /* Now wait. If we have already reached the point that we were
3861 * asked to wait to, don't wait at all, else wait for any change.
3862 * We need to select on 'sync_completed' as that is the place that
3863 * notifications happen, but we are really interested in
3864 * 'reshape_position'
3866 fd
= sysfs_get_fd(info
, NULL
, "sync_completed");
3868 goto check_progress
;
3870 if (sysfs_fd_get_ll(fd
, &completed
) < 0)
3871 goto check_progress
;
3873 while (completed
< max_progress
&& completed
< wait_point
) {
3874 /* Check that sync_action is still 'reshape' to avoid
3875 * waiting forever on a dead array
3878 if (sysfs_get_str(info
, NULL
, "sync_action",
3880 strncmp(action
, "reshape", 7) != 0)
3882 /* Some kernels reset 'sync_completed' to zero
3883 * before setting 'sync_action' to 'idle'.
3884 * So we need these extra tests.
3886 if (completed
== 0 && advancing
3887 && info
->reshape_progress
> 0)
3889 if (completed
== 0 && !advancing
3890 && info
->reshape_progress
< (info
->component_size
3891 * reshape
->after
.data_disks
))
3893 sysfs_wait(fd
, NULL
);
3894 if (sysfs_fd_get_ll(fd
, &completed
) < 0)
3895 goto check_progress
;
3897 /* Some kernels reset 'sync_completed' to zero,
3898 * we need to have real point we are in md
3901 completed
= max_progress
;
3903 /* some kernels can give an incorrectly high 'completed' number */
3904 completed
/= (info
->new_chunk
/512);
3905 completed
*= (info
->new_chunk
/512);
3906 /* Convert 'completed' back in to a 'progress' number */
3907 completed
*= reshape
->after
.data_disks
;
3909 completed
= info
->component_size
* reshape
->after
.data_disks
3912 *reshape_completed
= completed
;
3916 /* We return the need_backup flag. Caller will decide
3917 * how much - a multiple of ->backup_blocks up to *suspend_point
3920 return need_backup
> info
->reshape_progress
;
3922 return need_backup
>= info
->reshape_progress
;
3925 /* if we couldn't read a number from sync_completed, then
3926 * either the reshape did complete, or it aborted.
3927 * We can tell which by checking for 'none' in reshape_position.
3928 * If it did abort, then it might immediately restart if it
3929 * it was just a device failure that leaves us degraded but
3933 if (sysfs_get_str(info
, NULL
, "reshape_position", buf
, sizeof(buf
)) < 0
3934 || strncmp(buf
, "none", 4) != 0) {
3935 /* The abort might only be temporary. Wait up to 10
3936 * seconds for fd to contain a valid number again.
3940 unsigned long long new_sync_max
;
3941 while (fd
>= 0 && rv
< 0 && wait
> 0) {
3942 if (sysfs_wait(fd
, &wait
) != 1)
3944 switch (sysfs_fd_get_ll(fd
, &completed
)) {
3946 /* all good again */
3948 /* If "sync_max" is no longer max_progress
3949 * we need to freeze things
3951 sysfs_get_ll(info
, NULL
, "sync_max", &new_sync_max
);
3952 *frozen
= (new_sync_max
!= max_progress
);
3954 case -2: /* read error - abort */
3961 return rv
; /* abort */
3963 /* Maybe racing with array shutdown - check state */
3966 if (sysfs_get_str(info
, NULL
, "array_state", buf
, sizeof(buf
)) < 0
3967 || strncmp(buf
, "inactive", 8) == 0
3968 || strncmp(buf
, "clear",5) == 0)
3969 return -2; /* abort */
3970 return -1; /* complete */
3974 /* FIXME return status is never checked */
3975 static int grow_backup(struct mdinfo
*sra
,
3976 unsigned long long offset
, /* per device */
3977 unsigned long stripes
, /* per device, in old chunks */
3978 int *sources
, unsigned long long *offsets
,
3979 int disks
, int chunk
, int level
, int layout
,
3980 int dests
, int *destfd
, unsigned long long *destoffsets
,
3981 int part
, int *degraded
,
3984 /* Backup 'blocks' sectors at 'offset' on each device of the array,
3985 * to storage 'destfd' (offset 'destoffsets'), after first
3986 * suspending IO. Then allow resync to continue
3987 * over the suspended section.
3988 * Use part 'part' of the backup-super-block.
3993 unsigned long long ll
;
3995 //printf("offset %llu\n", offset);
4001 /* Check that array hasn't become degraded, else we might backup the wrong data */
4002 if (sysfs_get_ll(sra
, NULL
, "degraded", &ll
) < 0)
4003 return -1; /* FIXME this error is ignored */
4004 new_degraded
= (int)ll
;
4005 if (new_degraded
!= *degraded
) {
4006 /* check each device to ensure it is still working */
4008 for (sd
= sra
->devs
; sd
; sd
= sd
->next
) {
4009 if (sd
->disk
.state
& (1<<MD_DISK_FAULTY
))
4011 if (sd
->disk
.state
& (1<<MD_DISK_SYNC
)) {
4013 if (sysfs_get_str(sra
, sd
, "state", sbuf
, 20) < 0 ||
4014 strstr(sbuf
, "faulty") ||
4015 strstr(sbuf
, "in_sync") == NULL
) {
4016 /* this device is dead */
4017 sd
->disk
.state
= (1<<MD_DISK_FAULTY
);
4018 if (sd
->disk
.raid_disk
>= 0 &&
4019 sources
[sd
->disk
.raid_disk
] >= 0) {
4020 close(sources
[sd
->disk
.raid_disk
]);
4021 sources
[sd
->disk
.raid_disk
] = -1;
4026 *degraded
= new_degraded
;
4029 bsb
.arraystart2
= __cpu_to_le64(offset
* odata
);
4030 bsb
.length2
= __cpu_to_le64(stripes
* (chunk
/512) * odata
);
4032 bsb
.arraystart
= __cpu_to_le64(offset
* odata
);
4033 bsb
.length
= __cpu_to_le64(stripes
* (chunk
/512) * odata
);
4036 bsb
.magic
[15] = '2';
4037 for (i
= 0; i
< dests
; i
++)
4039 lseek64(destfd
[i
], destoffsets
[i
] + __le64_to_cpu(bsb
.devstart2
)*512, 0);
4041 lseek64(destfd
[i
], destoffsets
[i
], 0);
4043 rv
= save_stripes(sources
, offsets
,
4044 disks
, chunk
, level
, layout
,
4046 offset
*512*odata
, stripes
* chunk
* odata
,
4051 bsb
.mtime
= __cpu_to_le64(time(0));
4052 for (i
= 0; i
< dests
; i
++) {
4053 bsb
.devstart
= __cpu_to_le64(destoffsets
[i
]/512);
4055 bsb
.sb_csum
= bsb_csum((char*)&bsb
, ((char*)&bsb
.sb_csum
)-((char*)&bsb
));
4056 if (memcmp(bsb
.magic
, "md_backup_data-2", 16) == 0)
4057 bsb
.sb_csum2
= bsb_csum((char*)&bsb
,
4058 ((char*)&bsb
.sb_csum2
)-((char*)&bsb
));
4061 if ((unsigned long long)lseek64(destfd
[i
], destoffsets
[i
] - 4096, 0)
4062 != destoffsets
[i
] - 4096)
4064 if (write(destfd
[i
], &bsb
, 512) != 512)
4066 if (destoffsets
[i
] > 4096) {
4067 if ((unsigned long long)lseek64(destfd
[i
], destoffsets
[i
]+stripes
*chunk
*odata
, 0) !=
4068 destoffsets
[i
]+stripes
*chunk
*odata
)
4070 if (write(destfd
[i
], &bsb
, 512) != 512)
4080 /* in 2.6.30, the value reported by sync_completed can be
4081 * less that it should be by one stripe.
4082 * This only happens when reshape hits sync_max and pauses.
4083 * So allow wait_backup to either extent sync_max further
4084 * than strictly necessary, or return before the
4085 * sync has got quite as far as we would really like.
4086 * This is what 'blocks2' is for.
4087 * The various caller give appropriate values so that
4090 /* FIXME return value is often ignored */
4091 static int forget_backup(int dests
, int *destfd
,
4092 unsigned long long *destoffsets
,
4096 * Erase backup 'part' (which is 0 or 1)
4102 bsb
.arraystart2
= __cpu_to_le64(0);
4103 bsb
.length2
= __cpu_to_le64(0);
4105 bsb
.arraystart
= __cpu_to_le64(0);
4106 bsb
.length
= __cpu_to_le64(0);
4108 bsb
.mtime
= __cpu_to_le64(time(0));
4110 for (i
= 0; i
< dests
; i
++) {
4111 bsb
.devstart
= __cpu_to_le64(destoffsets
[i
]/512);
4112 bsb
.sb_csum
= bsb_csum((char*)&bsb
, ((char*)&bsb
.sb_csum
)-((char*)&bsb
));
4113 if (memcmp(bsb
.magic
, "md_backup_data-2", 16) == 0)
4114 bsb
.sb_csum2
= bsb_csum((char*)&bsb
,
4115 ((char*)&bsb
.sb_csum2
)-((char*)&bsb
));
4116 if ((unsigned long long)lseek64(destfd
[i
], destoffsets
[i
]-4096, 0) !=
4117 destoffsets
[i
]-4096)
4120 write(destfd
[i
], &bsb
, 512) != 512)
4127 static void fail(char *msg
)
4130 rv
= (write(2, msg
, strlen(msg
)) != (int)strlen(msg
));
4131 rv
|= (write(2, "\n", 1) != 1);
4135 static char *abuf
, *bbuf
;
4136 static unsigned long long abuflen
;
4137 static void validate(int afd
, int bfd
, unsigned long long offset
)
4139 /* check that the data in the backup against the array.
4140 * This is only used for regression testing and should not
4141 * be used while the array is active
4145 lseek64(bfd
, offset
- 4096, 0);
4146 if (read(bfd
, &bsb2
, 512) != 512)
4147 fail("cannot read bsb");
4148 if (bsb2
.sb_csum
!= bsb_csum((char*)&bsb2
,
4149 ((char*)&bsb2
.sb_csum
)-((char*)&bsb2
)))
4150 fail("first csum bad");
4151 if (memcmp(bsb2
.magic
, "md_backup_data", 14) != 0)
4152 fail("magic is bad");
4153 if (memcmp(bsb2
.magic
, "md_backup_data-2", 16) == 0 &&
4154 bsb2
.sb_csum2
!= bsb_csum((char*)&bsb2
,
4155 ((char*)&bsb2
.sb_csum2
)-((char*)&bsb2
)))
4156 fail("second csum bad");
4158 if (__le64_to_cpu(bsb2
.devstart
)*512 != offset
)
4159 fail("devstart is wrong");
4162 unsigned long long len
= __le64_to_cpu(bsb2
.length
)*512;
4164 if (abuflen
< len
) {
4168 if (posix_memalign((void**)&abuf
, 4096, abuflen
) ||
4169 posix_memalign((void**)&bbuf
, 4096, abuflen
)) {
4171 /* just stop validating on mem-alloc failure */
4176 lseek64(bfd
, offset
, 0);
4177 if ((unsigned long long)read(bfd
, bbuf
, len
) != len
) {
4178 //printf("len %llu\n", len);
4179 fail("read first backup failed");
4181 lseek64(afd
, __le64_to_cpu(bsb2
.arraystart
)*512, 0);
4182 if ((unsigned long long)read(afd
, abuf
, len
) != len
)
4183 fail("read first from array failed");
4184 if (memcmp(bbuf
, abuf
, len
) != 0) {
4187 printf("offset=%llu len=%llu\n",
4188 (unsigned long long)__le64_to_cpu(bsb2
.arraystart
)*512, len
);
4189 for (i
=0; i
<len
; i
++)
4190 if (bbuf
[i
] != abuf
[i
]) {
4191 printf("first diff byte %d\n", i
);
4195 fail("data1 compare failed");
4199 unsigned long long len
= __le64_to_cpu(bsb2
.length2
)*512;
4201 if (abuflen
< len
) {
4205 abuf
= xmalloc(abuflen
);
4206 bbuf
= xmalloc(abuflen
);
4209 lseek64(bfd
, offset
+__le64_to_cpu(bsb2
.devstart2
)*512, 0);
4210 if ((unsigned long long)read(bfd
, bbuf
, len
) != len
)
4211 fail("read second backup failed");
4212 lseek64(afd
, __le64_to_cpu(bsb2
.arraystart2
)*512, 0);
4213 if ((unsigned long long)read(afd
, abuf
, len
) != len
)
4214 fail("read second from array failed");
4215 if (memcmp(bbuf
, abuf
, len
) != 0)
4216 fail("data2 compare failed");
4220 int child_monitor(int afd
, struct mdinfo
*sra
, struct reshape
*reshape
,
4221 struct supertype
*st
, unsigned long blocks
,
4222 int *fds
, unsigned long long *offsets
,
4223 int dests
, int *destfd
, unsigned long long *destoffsets
)
4225 /* Monitor a reshape where backup is being performed using
4226 * 'native' mechanism - either to a backup file, or
4227 * to some space in a spare.
4231 unsigned long long speed
;
4232 unsigned long long suspend_point
, array_size
;
4233 unsigned long long backup_point
, wait_point
;
4234 unsigned long long reshape_completed
;
4236 int increasing
= reshape
->after
.data_disks
>= reshape
->before
.data_disks
;
4237 int part
= 0; /* The next part of the backup area to fill. It may already
4238 * be full, so we need to check */
4239 int level
= reshape
->level
;
4240 int layout
= reshape
->before
.layout
;
4241 int data
= reshape
->before
.data_disks
;
4242 int disks
= reshape
->before
.data_disks
+ reshape
->parity
;
4243 int chunk
= sra
->array
.chunk_size
;
4245 unsigned long stripes
;
4249 /* set up the backup-super-block. This requires the
4250 * uuid from the array.
4252 /* Find a superblock */
4253 for (sd
= sra
->devs
; sd
; sd
= sd
->next
) {
4257 if (sd
->disk
.state
& (1<<MD_DISK_FAULTY
))
4259 dn
= map_dev(sd
->disk
.major
, sd
->disk
.minor
, 1);
4260 devfd
= dev_open(dn
, O_RDONLY
);
4263 ok
= st
->ss
->load_super(st
, devfd
, NULL
);
4269 pr_err("Cannot find a superblock\n");
4273 memset(&bsb
, 0, 512);
4274 memcpy(bsb
.magic
, "md_backup_data-1", 16);
4275 st
->ss
->uuid_from_super(st
, uuid
);
4276 memcpy(bsb
.set_uuid
, uuid
, 16);
4277 bsb
.mtime
= __cpu_to_le64(time(0));
4278 bsb
.devstart2
= blocks
;
4280 stripes
= blocks
/ (sra
->array
.chunk_size
/512) /
4281 reshape
->before
.data_disks
;
4283 if (posix_memalign((void**)&buf
, 4096, disks
* chunk
))
4284 /* Don't start the 'reshape' */
4286 if (reshape
->before
.data_disks
== reshape
->after
.data_disks
) {
4287 sysfs_get_ll(sra
, NULL
, "sync_speed_min", &speed
);
4288 sysfs_set_num(sra
, NULL
, "sync_speed_min", 200000);
4292 array_size
= sra
->component_size
* reshape
->after
.data_disks
;
4293 backup_point
= sra
->reshape_progress
;
4296 array_size
= sra
->component_size
* reshape
->before
.data_disks
;
4297 backup_point
= reshape
->backup_blocks
;
4298 suspend_point
= array_size
;
4304 /* Want to return as soon the oldest backup slot can
4305 * be released as that allows us to start backing up
4306 * some more, providing suspend_point has been
4307 * advanced, which it should have.
4310 wait_point
= array_size
;
4311 if (part
== 0 && __le64_to_cpu(bsb
.length
) > 0)
4312 wait_point
= (__le64_to_cpu(bsb
.arraystart
) +
4313 __le64_to_cpu(bsb
.length
));
4314 if (part
== 1 && __le64_to_cpu(bsb
.length2
) > 0)
4315 wait_point
= (__le64_to_cpu(bsb
.arraystart2
) +
4316 __le64_to_cpu(bsb
.length2
));
4319 if (part
== 0 && __le64_to_cpu(bsb
.length
) > 0)
4320 wait_point
= __le64_to_cpu(bsb
.arraystart
);
4321 if (part
== 1 && __le64_to_cpu(bsb
.length2
) > 0)
4322 wait_point
= __le64_to_cpu(bsb
.arraystart2
);
4325 reshape_completed
= sra
->reshape_progress
;
4326 rv
= progress_reshape(sra
, reshape
,
4327 backup_point
, wait_point
,
4328 &suspend_point
, &reshape_completed
,
4330 /* external metadata would need to ping_monitor here */
4331 sra
->reshape_progress
= reshape_completed
;
4333 /* Clear any backup region that is before 'here' */
4335 if (__le64_to_cpu(bsb
.length
) > 0 &&
4336 reshape_completed
>= (__le64_to_cpu(bsb
.arraystart
) +
4337 __le64_to_cpu(bsb
.length
)))
4338 forget_backup(dests
, destfd
,
4340 if (__le64_to_cpu(bsb
.length2
) > 0 &&
4341 reshape_completed
>= (__le64_to_cpu(bsb
.arraystart2
) +
4342 __le64_to_cpu(bsb
.length2
)))
4343 forget_backup(dests
, destfd
,
4346 if (__le64_to_cpu(bsb
.length
) > 0 &&
4347 reshape_completed
<= (__le64_to_cpu(bsb
.arraystart
)))
4348 forget_backup(dests
, destfd
,
4350 if (__le64_to_cpu(bsb
.length2
) > 0 &&
4351 reshape_completed
<= (__le64_to_cpu(bsb
.arraystart2
)))
4352 forget_backup(dests
, destfd
,
4362 if (rv
== 0 && increasing
&& !st
->ss
->external
) {
4363 /* No longer need to monitor this reshape */
4364 sysfs_set_str(sra
, NULL
, "sync_max", "max");
4370 unsigned long long offset
;
4371 unsigned long actual_stripes
;
4372 /* Need to backup some data.
4373 * If 'part' is not used and the desired
4374 * backup size is suspended, do a backup,
4375 * then consider the next part.
4377 /* Check that 'part' is unused */
4378 if (part
== 0 && __le64_to_cpu(bsb
.length
) != 0)
4380 if (part
== 1 && __le64_to_cpu(bsb
.length2
) != 0)
4383 offset
= backup_point
/ data
;
4384 actual_stripes
= stripes
;
4386 if (offset
+ actual_stripes
* (chunk
/512) >
4387 sra
->component_size
)
4388 actual_stripes
= ((sra
->component_size
- offset
)
4390 if (offset
+ actual_stripes
* (chunk
/512) >
4394 if (offset
< actual_stripes
* (chunk
/512))
4395 actual_stripes
= offset
/ (chunk
/512);
4396 offset
-= actual_stripes
* (chunk
/512);
4397 if (offset
< suspend_point
/data
)
4400 if (actual_stripes
== 0)
4402 grow_backup(sra
, offset
, actual_stripes
,
4404 disks
, chunk
, level
, layout
,
4405 dests
, destfd
, destoffsets
,
4406 part
, °raded
, buf
);
4407 validate(afd
, destfd
[0], destoffsets
[0]);
4408 /* record where 'part' is up to */
4411 backup_point
+= actual_stripes
* (chunk
/512) * data
;
4413 backup_point
-= actual_stripes
* (chunk
/512) * data
;
4417 /* FIXME maybe call progress_reshape one more time instead */
4418 /* remove any remaining suspension */
4419 sysfs_set_num(sra
, NULL
, "suspend_lo", 0x7FFFFFFFFFFFFFFFULL
);
4420 sysfs_set_num(sra
, NULL
, "suspend_hi", 0);
4421 sysfs_set_num(sra
, NULL
, "suspend_lo", 0);
4422 sysfs_set_num(sra
, NULL
, "sync_min", 0);
4424 if (reshape
->before
.data_disks
== reshape
->after
.data_disks
)
4425 sysfs_set_num(sra
, NULL
, "sync_speed_min", speed
);
4431 * If any spare contains md_back_data-1 which is recent wrt mtime,
4432 * write that data into the array and update the super blocks with
4433 * the new reshape_progress
4435 int Grow_restart(struct supertype
*st
, struct mdinfo
*info
, int *fdlist
, int cnt
,
4436 char *backup_file
, int verbose
)
4440 unsigned long long *offsets
;
4441 unsigned long long nstripe
, ostripe
;
4444 odata
= info
->array
.raid_disks
- info
->delta_disks
- 1;
4445 if (info
->array
.level
== 6) odata
--; /* number of data disks */
4446 ndata
= info
->array
.raid_disks
- 1;
4447 if (info
->new_level
== 6) ndata
--;
4449 old_disks
= info
->array
.raid_disks
- info
->delta_disks
;
4451 if (info
->delta_disks
<= 0)
4452 /* Didn't grow, so the backup file must have
4456 for (i
=old_disks
-(backup_file
?1:0); i
<cnt
; i
++) {
4457 struct mdinfo dinfo
;
4460 char *devname
, namebuf
[20];
4461 unsigned long long lo
, hi
;
4463 /* This was a spare and may have some saved data on it.
4464 * Load the superblock, find and load the
4465 * backup_super_block.
4466 * If either fail, go on to next device.
4467 * If the backup contains no new info, just return
4468 * else restore data and update all superblocks
4470 if (i
== old_disks
-1) {
4471 fd
= open(backup_file
, O_RDONLY
);
4473 pr_err("backup file %s inaccessible: %s\n",
4474 backup_file
, strerror(errno
));
4477 devname
= backup_file
;
4482 if (st
->ss
->load_super(st
, fd
, NULL
))
4485 st
->ss
->getinfo_super(st
, &dinfo
, NULL
);
4486 st
->ss
->free_super(st
);
4489 (dinfo
.data_offset
+ dinfo
.component_size
- 8) <<9,
4491 pr_err("Cannot seek on device %d\n", i
);
4492 continue; /* Cannot seek */
4494 sprintf(namebuf
, "device-%d", i
);
4497 if (read(fd
, &bsb
, sizeof(bsb
)) != sizeof(bsb
)) {
4499 pr_err("Cannot read from %s\n", devname
);
4500 continue; /* Cannot read */
4502 if (memcmp(bsb
.magic
, "md_backup_data-1", 16) != 0 &&
4503 memcmp(bsb
.magic
, "md_backup_data-2", 16) != 0) {
4505 pr_err("No backup metadata on %s\n", devname
);
4508 if (bsb
.sb_csum
!= bsb_csum((char*)&bsb
, ((char*)&bsb
.sb_csum
)-((char*)&bsb
))) {
4510 pr_err("Bad backup-metadata checksum on %s\n", devname
);
4511 continue; /* bad checksum */
4513 if (memcmp(bsb
.magic
, "md_backup_data-2", 16) == 0 &&
4514 bsb
.sb_csum2
!= bsb_csum((char*)&bsb
, ((char*)&bsb
.sb_csum2
)-((char*)&bsb
))) {
4516 pr_err("Bad backup-metadata checksum2 on %s\n", devname
);
4517 continue; /* Bad second checksum */
4519 if (memcmp(bsb
.set_uuid
,info
->uuid
, 16) != 0) {
4521 pr_err("Wrong uuid on backup-metadata on %s\n", devname
);
4522 continue; /* Wrong uuid */
4525 /* array utime and backup-mtime should be updated at much the same time, but it seems that
4526 * sometimes they aren't... So allow considerable flexability in matching, and allow
4527 * this test to be overridden by an environment variable.
4529 if (info
->array
.utime
> (int)__le64_to_cpu(bsb
.mtime
) + 2*60*60 ||
4530 info
->array
.utime
< (int)__le64_to_cpu(bsb
.mtime
) - 10*60) {
4531 if (check_env("MDADM_GROW_ALLOW_OLD")) {
4532 pr_err("accepting backup with timestamp %lu "
4533 "for array with timestamp %lu\n",
4534 (unsigned long)__le64_to_cpu(bsb
.mtime
),
4535 (unsigned long)info
->array
.utime
);
4537 pr_err("too-old timestamp on backup-metadata on %s\n", devname
);
4538 pr_err("If you think it is should be safe, try 'export MDADM_GROW_ALLOW_OLD=1'\n");
4539 continue; /* time stamp is too bad */
4543 if (bsb
.magic
[15] == '1') {
4544 if (bsb
.length
== 0)
4546 if (info
->delta_disks
>= 0) {
4547 /* reshape_progress is increasing */
4548 if (__le64_to_cpu(bsb
.arraystart
)
4549 + __le64_to_cpu(bsb
.length
)
4550 < info
->reshape_progress
) {
4553 pr_err("backup-metadata found on %s but is not needed\n", devname
);
4554 continue; /* No new data here */
4557 /* reshape_progress is decreasing */
4558 if (__le64_to_cpu(bsb
.arraystart
) >=
4559 info
->reshape_progress
)
4560 goto nonew
; /* No new data here */
4563 if (bsb
.length
== 0 && bsb
.length2
== 0)
4565 if (info
->delta_disks
>= 0) {
4566 /* reshape_progress is increasing */
4567 if ((__le64_to_cpu(bsb
.arraystart
)
4568 + __le64_to_cpu(bsb
.length
)
4569 < info
->reshape_progress
)
4571 (__le64_to_cpu(bsb
.arraystart2
)
4572 + __le64_to_cpu(bsb
.length2
)
4573 < info
->reshape_progress
))
4574 goto nonew
; /* No new data here */
4576 /* reshape_progress is decreasing */
4577 if (__le64_to_cpu(bsb
.arraystart
) >=
4578 info
->reshape_progress
&&
4579 __le64_to_cpu(bsb
.arraystart2
) >=
4580 info
->reshape_progress
)
4581 goto nonew
; /* No new data here */
4584 if (lseek64(fd
, __le64_to_cpu(bsb
.devstart
)*512, 0)< 0) {
4587 pr_err("Failed to verify secondary backup-metadata block on %s\n",
4589 continue; /* Cannot seek */
4591 /* There should be a duplicate backup superblock 4k before here */
4592 if (lseek64(fd
, -4096, 1) < 0 ||
4593 read(fd
, &bsb2
, sizeof(bsb2
)) != sizeof(bsb2
))
4594 goto second_fail
; /* Cannot find leading superblock */
4595 if (bsb
.magic
[15] == '1')
4596 bsbsize
= offsetof(struct mdp_backup_super
, pad1
);
4598 bsbsize
= offsetof(struct mdp_backup_super
, pad
);
4599 if (memcmp(&bsb2
, &bsb
, bsbsize
) != 0)
4600 goto second_fail
; /* Cannot find leading superblock */
4602 /* Now need the data offsets for all devices. */
4603 offsets
= xmalloc(sizeof(*offsets
)*info
->array
.raid_disks
);
4604 for(j
=0; j
<info
->array
.raid_disks
; j
++) {
4607 if (st
->ss
->load_super(st
, fdlist
[j
], NULL
))
4608 /* FIXME should be this be an error */
4610 st
->ss
->getinfo_super(st
, &dinfo
, NULL
);
4611 st
->ss
->free_super(st
);
4612 offsets
[j
] = dinfo
.data_offset
* 512;
4614 printf("%s: restoring critical section\n", Name
);
4616 if (restore_stripes(fdlist
, offsets
,
4617 info
->array
.raid_disks
,
4621 fd
, __le64_to_cpu(bsb
.devstart
)*512,
4622 __le64_to_cpu(bsb
.arraystart
)*512,
4623 __le64_to_cpu(bsb
.length
)*512, NULL
)) {
4624 /* didn't succeed, so giveup */
4626 pr_err("Error restoring backup from %s\n",
4632 if (bsb
.magic
[15] == '2' &&
4633 restore_stripes(fdlist
, offsets
,
4634 info
->array
.raid_disks
,
4638 fd
, __le64_to_cpu(bsb
.devstart
)*512 +
4639 __le64_to_cpu(bsb
.devstart2
)*512,
4640 __le64_to_cpu(bsb
.arraystart2
)*512,
4641 __le64_to_cpu(bsb
.length2
)*512, NULL
)) {
4642 /* didn't succeed, so giveup */
4644 pr_err("Error restoring second backup from %s\n",
4652 /* Ok, so the data is restored. Let's update those superblocks. */
4656 lo
= __le64_to_cpu(bsb
.arraystart
);
4657 hi
= lo
+ __le64_to_cpu(bsb
.length
);
4659 if (bsb
.magic
[15] == '2' && bsb
.length2
) {
4660 unsigned long long lo1
, hi1
;
4661 lo1
= __le64_to_cpu(bsb
.arraystart2
);
4662 hi1
= lo1
+ __le64_to_cpu(bsb
.length2
);
4666 } else if (lo
< lo1
)
4672 (info
->reshape_progress
< lo
||
4673 info
->reshape_progress
> hi
))
4674 /* backup does not affect reshape_progress*/ ;
4675 else if (info
->delta_disks
>= 0) {
4676 info
->reshape_progress
= __le64_to_cpu(bsb
.arraystart
) +
4677 __le64_to_cpu(bsb
.length
);
4678 if (bsb
.magic
[15] == '2') {
4679 unsigned long long p2
= __le64_to_cpu(bsb
.arraystart2
) +
4680 __le64_to_cpu(bsb
.length2
);
4681 if (p2
> info
->reshape_progress
)
4682 info
->reshape_progress
= p2
;
4685 info
->reshape_progress
= __le64_to_cpu(bsb
.arraystart
);
4686 if (bsb
.magic
[15] == '2') {
4687 unsigned long long p2
= __le64_to_cpu(bsb
.arraystart2
);
4688 if (p2
< info
->reshape_progress
)
4689 info
->reshape_progress
= p2
;
4692 for (j
=0; j
<info
->array
.raid_disks
; j
++) {
4695 if (st
->ss
->load_super(st
, fdlist
[j
], NULL
))
4697 st
->ss
->getinfo_super(st
, &dinfo
, NULL
);
4698 dinfo
.reshape_progress
= info
->reshape_progress
;
4699 st
->ss
->update_super(st
, &dinfo
,
4700 "_reshape_progress",
4702 st
->ss
->store_super(st
, fdlist
[j
]);
4703 st
->ss
->free_super(st
);
4707 /* Didn't find any backup data, try to see if any
4710 if (info
->delta_disks
< 0) {
4711 /* When shrinking, the critical section is at the end.
4712 * So see if we are before the critical section.
4714 unsigned long long first_block
;
4715 nstripe
= ostripe
= 0;
4717 while (ostripe
>= nstripe
) {
4718 ostripe
+= info
->array
.chunk_size
/ 512;
4719 first_block
= ostripe
* odata
;
4720 nstripe
= first_block
/ ndata
/ (info
->new_chunk
/512) *
4721 (info
->new_chunk
/512);
4724 if (info
->reshape_progress
>= first_block
)
4727 if (info
->delta_disks
> 0) {
4728 /* See if we are beyond the critical section. */
4729 unsigned long long last_block
;
4730 nstripe
= ostripe
= 0;
4732 while (nstripe
>= ostripe
) {
4733 nstripe
+= info
->new_chunk
/ 512;
4734 last_block
= nstripe
* ndata
;
4735 ostripe
= last_block
/ odata
/ (info
->array
.chunk_size
/512) *
4736 (info
->array
.chunk_size
/512);
4739 if (info
->reshape_progress
>= last_block
)
4742 /* needed to recover critical section! */
4744 pr_err("Failed to find backup of critical section\n");
4748 int Grow_continue_command(char *devname
, int fd
,
4749 char *backup_file
, int verbose
)
4752 struct supertype
*st
= NULL
;
4753 struct mdinfo
*content
= NULL
;
4754 struct mdinfo array
;
4755 char *subarray
= NULL
;
4756 struct mdinfo
*cc
= NULL
;
4757 struct mdstat_ent
*mdstat
= NULL
;
4761 dprintf("Grow continue from command line called for %s\n",
4764 st
= super_by_fd(fd
, &subarray
);
4765 if (!st
|| !st
->ss
) {
4766 pr_err("Unable to determine metadata format for %s\n",
4770 dprintf("Grow continue is run for ");
4771 if (st
->ss
->external
== 0) {
4773 dprintf("native array (%s)\n", devname
);
4774 if (ioctl(fd
, GET_ARRAY_INFO
, &array
.array
) < 0) {
4775 pr_err("%s is not an active md array -"
4776 " aborting\n", devname
);
4778 goto Grow_continue_command_exit
;
4781 /* Need to load a superblock.
4782 * FIXME we should really get what we need from
4785 for (d
= 0; d
< MAX_DISKS
; d
++) {
4786 mdu_disk_info_t disk
;
4790 if (ioctl(fd
, GET_DISK_INFO
, &disk
) < 0)
4792 if (disk
.major
== 0 && disk
.minor
== 0)
4794 if ((disk
.state
& (1 << MD_DISK_ACTIVE
)) == 0)
4796 dv
= map_dev(disk
.major
, disk
.minor
, 1);
4799 fd2
= dev_open(dv
, O_RDONLY
);
4802 err
= st
->ss
->load_super(st
, fd2
, NULL
);
4804 /* invalidate fd2 to avoid possible double close() */
4810 if (d
== MAX_DISKS
) {
4811 pr_err("Unable to load metadata for %s\n",
4814 goto Grow_continue_command_exit
;
4816 st
->ss
->getinfo_super(st
, content
, NULL
);
4821 dprintf("subarray (%s)\n", subarray
);
4822 container
= st
->container_devnm
;
4823 cfd
= open_dev_excl(st
->container_devnm
);
4825 container
= st
->devnm
;
4827 cfd
= open_dev_excl(st
->devnm
);
4828 dprintf("container (%s)\n", container
);
4832 pr_err("Unable to open container "
4833 "for %s\n", devname
);
4835 goto Grow_continue_command_exit
;
4838 /* find in container array under reshape
4840 ret_val
= st
->ss
->load_container(st
, cfd
, NULL
);
4842 pr_err("Cannot read superblock for %s\n",
4845 goto Grow_continue_command_exit
;
4848 cc
= st
->ss
->container_content(st
, subarray
);
4849 for (content
= cc
; content
; content
= content
->next
) {
4851 int allow_reshape
= 1;
4853 if (content
->reshape_active
== 0)
4855 /* The decision about array or container wide
4856 * reshape is taken in Grow_continue based
4857 * content->reshape_active state, therefore we
4858 * need to check_reshape based on
4859 * reshape_active and subarray name
4861 if (content
->array
.state
& (1<<MD_SB_BLOCK_VOLUME
))
4863 if (content
->reshape_active
== CONTAINER_RESHAPE
&&
4864 (content
->array
.state
4865 & (1<<MD_SB_BLOCK_CONTAINER_RESHAPE
)))
4868 if (!allow_reshape
) {
4869 pr_err("cannot continue reshape of an array"
4870 " in container with unsupported"
4871 " metadata: %s(%s)\n",
4872 devname
, container
);
4874 goto Grow_continue_command_exit
;
4877 array
= strchr(content
->text_version
+1, '/')+1;
4878 mdstat
= mdstat_by_subdev(array
, container
);
4881 if (mdstat
->active
== 0) {
4882 pr_err("Skipping inactive array %s.\n",
4884 free_mdstat(mdstat
);
4891 pr_err("Unable to determine reshaped "
4892 "array for %s\n", devname
);
4894 goto Grow_continue_command_exit
;
4896 fd2
= open_dev(mdstat
->devnm
);
4898 pr_err("cannot open (%s)\n", mdstat
->devnm
);
4900 goto Grow_continue_command_exit
;
4903 sysfs_init(content
, fd2
, mdstat
->devnm
);
4905 /* start mdmon in case it is not running
4907 if (!mdmon_running(container
))
4908 start_mdmon(container
);
4909 ping_monitor(container
);
4911 if (mdmon_running(container
))
4912 st
->update_tail
= &st
->updates
;
4914 pr_err("No mdmon found. "
4915 "Grow cannot continue.\n");
4917 goto Grow_continue_command_exit
;
4921 /* verify that array under reshape is started from
4924 if (verify_reshape_position(content
, content
->array
.level
) < 0) {
4926 goto Grow_continue_command_exit
;
4931 ret_val
= Grow_continue(fd
, st
, content
, backup_file
, 1, 0);
4933 Grow_continue_command_exit
:
4938 st
->ss
->free_super(st
);
4939 free_mdstat(mdstat
);
4946 int Grow_continue(int mdfd
, struct supertype
*st
, struct mdinfo
*info
,
4947 char *backup_file
, int forked
, int freeze_reshape
)
4951 if (!info
->reshape_active
)
4954 if (st
->ss
->external
) {
4955 int cfd
= open_dev(st
->container_devnm
);
4960 st
->ss
->load_container(st
, cfd
, st
->container_devnm
);
4962 ret_val
= reshape_container(st
->container_devnm
, NULL
, mdfd
,
4963 st
, info
, 0, backup_file
,
4965 1 | info
->reshape_active
,
4968 ret_val
= reshape_array(NULL
, mdfd
, "array", st
, info
, 1,
4969 NULL
, INVALID_SECTORS
,
4970 backup_file
, 0, forked
,
4971 1 | info
->reshape_active
,
4977 char *make_backup(char *name
)
4979 char *base
= "backup_file-";
4983 len
= strlen(MAP_DIR
) + 1 + strlen(base
) + strlen(name
)+1;
4984 fname
= xmalloc(len
);
4985 sprintf(fname
, "%s/%s%s", MAP_DIR
, base
, name
);
4989 char *locate_backup(char *name
)
4991 char *fl
= make_backup(name
);
4994 if (stat(fl
, &stb
) == 0 &&
4995 S_ISREG(stb
.st_mode
))