MCONFIG

   1 # MCONFIG -- Configuration stuff for util-linux
   2 # Created: Sat Feb  4 15:50:30 1995
   3 # Copyright 1995 Rickard E. Faith (faith@cs.unc.edu)
   4
   5 # For a user-mode install, make (at least) three changes:
   6 #  - remove the `-o root' part in INSTALLSUID
   7 #  - set USE_TTY_GROUP=no
   8 #  - define DESTDIR
   9
  10 # Select for ARCH one of intel, alpha, sparc, arm, m68k, mips
  11 # Select for CPU i386 if the binaries must be able to run on an intel 386
  12 # (by default i486 code is generated, see below)
  13 CPU=$(shell uname -m)
  14 ARCH=$(shell echo $(CPU) | sed 's/i.86/intel/;s/arm.*/arm/')
  15
  16 # If HAVE_PAM is set to "yes", then login, chfn, chsh, and newgrp
  17 # will use PAM for authentication. Additionally, passwd will not be
  18 # installed as it is not PAM aware.
  19 HAVE_PAM=no
  20
  21 # If HAVE_SHADOW is set to "yes", then login, chfn, chsh, newgrp, passwd,
  22 # and vipw will not be built or installed from the login-utils
  23 # subdirectory.
  24 HAVE_SHADOW=yes
  25
  26 # If HAVE_PASSWD is set to "yes", then passwd will not be built or
  27 # installed from the login-utils subdirectory (but login, chfn, chsh,
  28 # newgrp, and vipw *will* be installed).
  29 HAVE_PASSWD=no
  30
  31 # If you use chfn and chsh from this package, REQUIRE_PASSWORD will require
  32 # non-root users to enter the account password before updating /etc/passwd.
  33 REQUIRE_PASSWORD=yes
  34 #REQUIRE_PASSWORD=no
  35
  36 # If you use chsh from this package, ONLY_LISTED_SHELLS will require that
  37 # the selected shell be listed in /etc/shells -- otherwise only a warning is
  38 # printed.  This prevents someone from setting their shell to /bin/false.
  39 ONLY_LISTED_SHELLS=yes
  40 #ONLY_LISTED_SHELLS=no
  41
  42
  43 # If HAVE_SYSVINIT is set to "yes", then simpleinit and shutdown will not
  44 # be built or installed from the login-utils subdirectory.  (The shutdown
  45 # and halt that come with the SysVinit package should be used with the init
  46 # found in that package.)
  47 HAVE_SYSVINIT=yes
  48
  49 # If HAVE_SYSVINIT_UTILS is set to "yes", then last, mesg, and wall will
  50 # not be built or installed from the login-utils subdirectory.  (The
  51 # shutdown and init from the SysVinit package do not depend on the last,
  52 # mesg, and wall from that package.)
  53 HAVE_SYSVINIT_UTILS=yes
  54
  55 # If HAVE_WRITE is set to "yes", then write will not be built or
  56 # installed from the misc-utils subdirectory.
  57 # (There is a network aware write in netwrite from NetKit 0.16 or later.)
  58 HAVE_WRITE=no
  59
  60 # If HAVE_GETTY is set to "yes", then agetty will not be built or
  61 # installed from the login-utils subdirectory.  Note that agetty can
  62 # co-exist with other gettys, so this option should never be used.
  63 HAVE_GETTY=no
  64
  65 # If USE_TTY_GROUP is set to "yes", then wall and write will be installed
  66 # setgid to the "tty" group, and mesg will only set the group write bit.
  67 # Note that this is only useful if login/xterm/etc. change the group of the
  68 # user's tty to "tty" [The login in util-linux does this correctly, and
  69 # xterm will do it correctly if X is compiled with USE_TTY_GROUP set
  70 # properly.]
  71 USE_TTY_GROUP=yes
  72
  73 # If HAVE_KILL is set to "yes", then kill will not be built or
  74 # installed from the misc-utils subdirectory.
  75 # (There is also a kill in the procps package.)
  76 HAVE_KILL=no
  77
  78 # If ALLOW_VCS_USE is set to "yes", then login will chown /dev/vcsN
  79 # to the current user, allowing her to make a screendump and do other
  80 # nifty things on the console, but also allowing him to keep an open
  81 # file descriptor after logging out to trick the next user.
  82 ALLOW_VCS_USE=yes
  83
  84 # If HAVE_RESET is set to "yes", then reset won't be installed.  The version
  85 # of reset that comes with the ncurses package is less aggressive.
  86 HAVE_RESET=yes
  87
  88 # If HAVE_SLN is set to "yes", then sln won't be installed
  89 # (but the man page sln.8 will be installed anyway).
  90 # sln also comes with libc and glibc.
  91 HAVE_SLN=no
  92
  93 # If HAVE_FDUTILS is set to "yes", then setfdprm won't be installed.
  94 HAVE_FDUTILS=no
  95
  96 # If SILENT_PG is set to "yes", then pg will not ring the bell
  97 # when an invalid key is pressed
  98 SILENT_PG=no
  99
 100 # If configure decides that Native Language Support (NLS) is available,
 101 # it sets MAY_ENABLE_NLS in defines.h. If you don't want NLS, set
 102 # DISABLE_NLS to "yes".
 103 DISABLE_NLS=no
 104
 105 # Different optimizations for different cpus.
 106 # gcc 3.0 likes options -mcpu=i486 instead of -m486
 107 ifeq "$(ARCH)" "intel"
 108   ifeq "$(HAVE_OLD_GCC)" "yes"
 109     CPUHEAD=-m
 110   else
 111     CPUHEAD=-mcpu=i
 112   endif
 113   ifeq "$(CPU)" "i386"
 114     CPUTAIL=386
 115   else
 116     CPUTAIL=486
 117   endif
 118   CPUOPT= $(CPUHEAD)$(CPUTAIL)
 119   OPT=          -pipe -O2 $(CPUOPT) -fomit-frame-pointer
 120 else
 121   ifeq "$(ARCH)" "arm"
 122     OPT=        -pipe -O2 -fsigned-char -fomit-frame-pointer
 123   else
 124     OPT=        -O2 -fomit-frame-pointer
 125   endif
 126 endif
 127
 128 WARNFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes
 129
 130 LIB=../lib
 131
 132 ERR_O=$(LIB)/err.o
 133
 134 # Set HAVE_SLANG to yes if you have slang (and prefer to use that for cfdisk)
 135 # (If neither HAVE_NCURSES nor HAVE_SLANG is defined, cfdisk is not made.)
 136 # HAVE_SLANG=yes
 137
 138 # There is a subdirectory /usr/include/slang containing slcurses.h
 139 # SLANGFLAGS=-I/usr/include/slang
 140 # No such subdirectory - slcurses.h lives in /usr/include
 141 #   (no extra definition required).
 142 LIBSLANG=-lslang
 143
 144 #
 145 # Paths used for compilation (not all are actually used, see CFLAGS below)
 146 #
 147 DEV_DIR=        /dev
 148 ETC_DIR=        /etc
 149 SBIN_DIR=       /sbin
 150 USRSBIN_DIR=    /usr/sbin
 151 USRLIB_DIR=     /usr/lib
 152 USRBIN_DIR=     /usr/bin
 153 USRGAMES_DIR=   /usr/games
 154 USRSHAREMISC_DIR=/usr/share/misc
 155 LOCALE_DIR=     /usr/share/locale
 156 BIN_DIR=        /bin
 157 VAR_PATH=       /var
 158 LOG_DIR=        /var/log
 159 MAN_DIR=        /usr/share/man
 160 INFO_DIR=       /usr/share/info
 161
 162 # Directory for help file for more.  Used to be /usr/lib.
 163 MOREHELP_DIR=   $(USRSHAREMISC_DIR)
 164
 165 #
 166 # Paths used for install
 167 #
 168 DEVDIR=         $(DESTDIR)$(DEV_DIR)
 169 ETCDIR=         $(DESTDIR)$(ETC_DIR)
 170 SBINDIR=        $(DESTDIR)$(SBIN_DIR)
 171 USRSBINDIR=     $(DESTDIR)$(USRSBIN_DIR)
 172 USRLIBDIR=      $(DESTDIR)$(USRLIB_DIR)
 173 USRBINDIR=      $(DESTDIR)$(USRBIN_DIR)
 174 USRGAMESDIR=    $(DESTDIR)$(USRGAMES_DIR)
 175 USRSHAREMISCDIR=$(DESTDIR)$(USRSHAREMISC_DIR)
 176 LOCALEDIR=      $(DESTDIR)$(LOCALE_DIR)
 177 BINDIR=         $(DESTDIR)$(BIN_DIR)
 178 VARPATH=        $(DESTDIR)$(VAR_PATH)
 179 LOGDIR=         $(DESTDIR)$(LOG_DIR)
 180 MANDIR=         $(DESTDIR)$(MAN_DIR)
 181 MAN1DIR=        $(MANDIR)/man1
 182 MAN3DIR=        $(MANDIR)/man3
 183 MAN5DIR=        $(MANDIR)/man5
 184 MAN6DIR=        $(MANDIR)/man6
 185 MAN8DIR=        $(MANDIR)/man8
 186 INFODIR=        $(DESTDIR)$(INFO_DIR)
 187
 188 # Directory for shutdown, halt, reboot, etc.
 189 SHUTDOWNDIR=    $(SBINDIR)
 190
 191 # Directory for help file for more.  Used to be /usr/lib.
 192 MOREHELPDIR=    $(DESTDIR)$(MOREHELP_DIR)
 193
 194 # Modes
 195 DIRMODE=        755
 196 BINMODE=        755
 197 MANMODE=        644
 198 DATMODE=        644
 199 INFOMODE=       644
 200 SUIDMODE=      4755
 201
 202 CHMOD=          chmod
 203 INSTALL=        install
 204 INSTALLDIR=     $(INSTALL) -d -m $(DIRMODE)
 205 INSTALLBIN=     $(INSTALL) -m $(BINMODE)
 206 INSTALLMAN=     $(INSTALL) -m $(MANMODE)
 207 INSTALLDAT=     $(INSTALL) -m $(DATMODE)
 208 INSTALLSUID=    $(INSTALL) -m $(SUIDMODE) -o root
 209
 210 ifeq "$(DISABLE_NLS)" "yes"
 211 NLSFLAGS = -DDISABLE_NLS
 212 endif
 213
 214 CFLAGS := $(OPT) -I$(LIB) $(WARNFLAGS) \
 215                         $(CURSESFLAGS) $(SLANGFLAGS) $(NLSFLAGS) \
 216                         -D_FILE_OFFSET_BITS=64 \
 217                         -DSBINDIR=\"$(SBIN_DIR)\" \
 218                         -DUSRSBINDIR=\"$(USRSBIN_DIR)\" \
 219                         -DLOGDIR=\"$(LOG_DIR)\" \
 220                         -DVARPATH=\"$(VAR_PATH)\" \
 221                         -DLOCALEDIR=\"$(LOCALE_DIR)\" \
 222                         $(CFLAGS)
 223
 224
 225 %.o: %.c
 226         $(CC) -c $(CFLAGS) $< -o $@
 227
 228 %: %.cc
 229         $(CXX) $(CFLAGS) $< -o $@
 230