bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright (C) 1990-2015 Free Software Foundation, Inc.
   3    Written by Cygnus Support.
   4
   5    This file is part of BFD, the Binary File Descriptor library.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 /*
  23 SECTION
  24         Relocations
  25
  26         BFD maintains relocations in much the same way it maintains
  27         symbols: they are left alone until required, then read in
  28         en-masse and translated into an internal form.  A common
  29         routine <<bfd_perform_relocation>> acts upon the
  30         canonical form to do the fixup.
  31
  32         Relocations are maintained on a per section basis,
  33         while symbols are maintained on a per BFD basis.
  34
  35         All that a back end has to do to fit the BFD interface is to create
  36         a <<struct reloc_cache_entry>> for each relocation
  37         in a particular section, and fill in the right bits of the structures.
  38
  39 @menu
  40 @* typedef arelent::
  41 @* howto manager::
  42 @end menu
  43
  44 */
  45
  46 /* DO compile in the reloc_code name table from libbfd.h.  */
  47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  48
  49 #include "sysdep.h"
  50 #include "bfd.h"
  51 #include "bfdlink.h"
  52 #include "libbfd.h"
  53 /*
  54 DOCDD
  55 INODE
  56         typedef arelent, howto manager, Relocations, Relocations
  57
  58 SUBSECTION
  59         typedef arelent
  60
  61         This is the structure of a relocation entry:
  62
  63 CODE_FRAGMENT
  64 .
  65 .typedef enum bfd_reloc_status
  66 .{
  67 .  {* No errors detected.  *}
  68 .  bfd_reloc_ok,
  69 .
  70 .  {* The relocation was performed, but there was an overflow.  *}
  71 .  bfd_reloc_overflow,
  72 .
  73 .  {* The address to relocate was not within the section supplied.  *}
  74 .  bfd_reloc_outofrange,
  75 .
  76 .  {* Used by special functions.  *}
  77 .  bfd_reloc_continue,
  78 .
  79 .  {* Unsupported relocation size requested.  *}
  80 .  bfd_reloc_notsupported,
  81 .
  82 .  {* Unused.  *}
  83 .  bfd_reloc_other,
  84 .
  85 .  {* The symbol to relocate against was undefined.  *}
  86 .  bfd_reloc_undefined,
  87 .
  88 .  {* The relocation was performed, but may not be ok - presently
  89 .     generated only when linking i960 coff files with i960 b.out
  90 .     symbols.  If this type is returned, the error_message argument
  91 .     to bfd_perform_relocation will be set.  *}
  92 .  bfd_reloc_dangerous
  93 . }
  94 . bfd_reloc_status_type;
  95 .
  96 .
  97 .typedef struct reloc_cache_entry
  98 .{
  99 .  {* A pointer into the canonical table of pointers.  *}
 100 .  struct bfd_symbol **sym_ptr_ptr;
 101 .
 102 .  {* offset in section.  *}
 103 .  bfd_size_type address;
 104 .
 105 .  {* addend for relocation value.  *}
 106 .  bfd_vma addend;
 107 .
 108 .  {* Pointer to how to perform the required relocation.  *}
 109 .  reloc_howto_type *howto;
 110 .
 111 .}
 112 .arelent;
 113 .
 114 */
 115
 116 /*
 117 DESCRIPTION
 118
 119         Here is a description of each of the fields within an <<arelent>>:
 120
 121         o <<sym_ptr_ptr>>
 122
 123         The symbol table pointer points to a pointer to the symbol
 124         associated with the relocation request.  It is the pointer
 125         into the table returned by the back end's
 126         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 127         referenced through a pointer to a pointer so that tools like
 128         the linker can fix up all the symbols of the same name by
 129         modifying only one pointer. The relocation routine looks in
 130         the symbol and uses the base of the section the symbol is
 131         attached to and the value of the symbol as the initial
 132         relocation offset. If the symbol pointer is zero, then the
 133         section provided is looked up.
 134
 135         o <<address>>
 136
 137         The <<address>> field gives the offset in bytes from the base of
 138         the section data which owns the relocation record to the first
 139         byte of relocatable information. The actual data relocated
 140         will be relative to this point; for example, a relocation
 141         type which modifies the bottom two bytes of a four byte word
 142         would not touch the first byte pointed to in a big endian
 143         world.
 144
 145         o <<addend>>
 146
 147         The <<addend>> is a value provided by the back end to be added (!)
 148         to the relocation offset. Its interpretation is dependent upon
 149         the howto. For example, on the 68k the code:
 150
 151 |        char foo[];
 152 |        main()
 153 |                {
 154 |                return foo[0x12345678];
 155 |                }
 156
 157         Could be compiled into:
 158
 159 |        linkw fp,#-4
 160 |        moveb @@#12345678,d0
 161 |        extbl d0
 162 |        unlk fp
 163 |        rts
 164
 165         This could create a reloc pointing to <<foo>>, but leave the
 166         offset in the data, something like:
 167
 168 |RELOCATION RECORDS FOR [.text]:
 169 |offset   type      value
 170 |00000006 32        _foo
 171 |
 172 |00000000 4e56 fffc          ; linkw fp,#-4
 173 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 174 |0000000a 49c0               ; extbl d0
 175 |0000000c 4e5e               ; unlk fp
 176 |0000000e 4e75               ; rts
 177
 178         Using coff and an 88k, some instructions don't have enough
 179         space in them to represent the full address range, and
 180         pointers have to be loaded in two parts. So you'd get something like:
 181
 182 |        or.u     r13,r0,hi16(_foo+0x12345678)
 183 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 184 |        jmp      r1
 185
 186         This should create two relocs, both pointing to <<_foo>>, and with
 187         0x12340000 in their addend field. The data would consist of:
 188
 189 |RELOCATION RECORDS FOR [.text]:
 190 |offset   type      value
 191 |00000002 HVRT16    _foo+0x12340000
 192 |00000006 LVRT16    _foo+0x12340000
 193 |
 194 |00000000 5da05678           ; or.u r13,r0,0x5678
 195 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 196 |00000008 f400c001           ; jmp r1
 197
 198         The relocation routine digs out the value from the data, adds
 199         it to the addend to get the original offset, and then adds the
 200         value of <<_foo>>. Note that all 32 bits have to be kept around
 201         somewhere, to cope with carry from bit 15 to bit 16.
 202
 203         One further example is the sparc and the a.out format. The
 204         sparc has a similar problem to the 88k, in that some
 205         instructions don't have room for an entire offset, but on the
 206         sparc the parts are created in odd sized lumps. The designers of
 207         the a.out format chose to not use the data within the section
 208         for storing part of the offset; all the offset is kept within
 209         the reloc. Anything in the data should be ignored.
 210
 211 |        save %sp,-112,%sp
 212 |        sethi %hi(_foo+0x12345678),%g2
 213 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 214 |        ret
 215 |        restore
 216
 217         Both relocs contain a pointer to <<foo>>, and the offsets
 218         contain junk.
 219
 220 |RELOCATION RECORDS FOR [.text]:
 221 |offset   type      value
 222 |00000004 HI22      _foo+0x12345678
 223 |00000008 LO10      _foo+0x12345678
 224 |
 225 |00000000 9de3bf90     ; save %sp,-112,%sp
 226 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 227 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 228 |0000000c 81c7e008     ; ret
 229 |00000010 81e80000     ; restore
 230
 231         o <<howto>>
 232
 233         The <<howto>> field can be imagined as a
 234         relocation instruction. It is a pointer to a structure which
 235         contains information on what to do with all of the other
 236         information in the reloc record and data section. A back end
 237         would normally have a relocation instruction set and turn
 238         relocations into pointers to the correct structure on input -
 239         but it would be possible to create each howto field on demand.
 240
 241 */
 242
 243 /*
 244 SUBSUBSECTION
 245         <<enum complain_overflow>>
 246
 247         Indicates what sort of overflow checking should be done when
 248         performing a relocation.
 249
 250 CODE_FRAGMENT
 251 .
 252 .enum complain_overflow
 253 .{
 254 .  {* Do not complain on overflow.  *}
 255 .  complain_overflow_dont,
 256 .
 257 .  {* Complain if the value overflows when considered as a signed
 258 .     number one bit larger than the field.  ie. A bitfield of N bits
 259 .     is allowed to represent -2**n to 2**n-1.  *}
 260 .  complain_overflow_bitfield,
 261 .
 262 .  {* Complain if the value overflows when considered as a signed
 263 .     number.  *}
 264 .  complain_overflow_signed,
 265 .
 266 .  {* Complain if the value overflows when considered as an
 267 .     unsigned number.  *}
 268 .  complain_overflow_unsigned
 269 .};
 270
 271 */
 272
 273 /*
 274 SUBSUBSECTION
 275         <<reloc_howto_type>>
 276
 277         The <<reloc_howto_type>> is a structure which contains all the
 278         information that libbfd needs to know to tie up a back end's data.
 279
 280 CODE_FRAGMENT
 281 .struct bfd_symbol;             {* Forward declaration.  *}
 282 .
 283 .struct reloc_howto_struct
 284 .{
 285 .  {*  The type field has mainly a documentary use - the back end can
 286 .      do what it wants with it, though normally the back end's
 287 .      external idea of what a reloc number is stored
 288 .      in this field.  For example, a PC relative word relocation
 289 .      in a coff environment has the type 023 - because that's
 290 .      what the outside world calls a R_PCRWORD reloc.  *}
 291 .  unsigned int type;
 292 .
 293 .  {*  The value the final relocation is shifted right by.  This drops
 294 .      unwanted data from the relocation.  *}
 295 .  unsigned int rightshift;
 296 .
 297 .  {*  The size of the item to be relocated.  This is *not* a
 298 .      power-of-two measure.  To get the number of bytes operated
 299 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 300 .  int size;
 301 .
 302 .  {*  The number of bits in the item to be relocated.  This is used
 303 .      when doing overflow checking.  *}
 304 .  unsigned int bitsize;
 305 .
 306 .  {*  The relocation is relative to the field being relocated.  *}
 307 .  bfd_boolean pc_relative;
 308 .
 309 .  {*  The bit position of the reloc value in the destination.
 310 .      The relocated value is left shifted by this amount.  *}
 311 .  unsigned int bitpos;
 312 .
 313 .  {* What type of overflow error should be checked for when
 314 .     relocating.  *}
 315 .  enum complain_overflow complain_on_overflow;
 316 .
 317 .  {* If this field is non null, then the supplied function is
 318 .     called rather than the normal function.  This allows really
 319 .     strange relocation methods to be accommodated (e.g., i960 callj
 320 .     instructions).  *}
 321 .  bfd_reloc_status_type (*special_function)
 322 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 323 .     bfd *, char **);
 324 .
 325 .  {* The textual name of the relocation type.  *}
 326 .  char *name;
 327 .
 328 .  {* Some formats record a relocation addend in the section contents
 329 .     rather than with the relocation.  For ELF formats this is the
 330 .     distinction between USE_REL and USE_RELA (though the code checks
 331 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 332 .     addend is recorded with the section contents; when performing a
 333 .     partial link (ld -r) the section contents (the data) will be
 334 .     modified.  The value of this field is FALSE if addends are
 335 .     recorded with the relocation (in arelent.addend); when performing
 336 .     a partial link the relocation will be modified.
 337 .     All relocations for all ELF USE_RELA targets should set this field
 338 .     to FALSE (values of TRUE should be looked on with suspicion).
 339 .     However, the converse is not true: not all relocations of all ELF
 340 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 341 .     to each particular target.  For relocs that aren't used in partial
 342 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 343 .  bfd_boolean partial_inplace;
 344 .
 345 .  {* src_mask selects the part of the instruction (or data) to be used
 346 .     in the relocation sum.  If the target relocations don't have an
 347 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 348 .     dst_mask to extract the addend from the section contents.  If
 349 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 350 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 351 .     bogus as in those cases the value in the dst_mask part of the
 352 .     section contents should be treated as garbage.  *}
 353 .  bfd_vma src_mask;
 354 .
 355 .  {* dst_mask selects which parts of the instruction (or data) are
 356 .     replaced with a relocated value.  *}
 357 .  bfd_vma dst_mask;
 358 .
 359 .  {* When some formats create PC relative instructions, they leave
 360 .     the value of the pc of the place being relocated in the offset
 361 .     slot of the instruction, so that a PC relative relocation can
 362 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 363 .     Some formats leave the displacement part of an instruction
 364 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 365 .  bfd_boolean pcrel_offset;
 366 .};
 367 .
 368 */
 369
 370 /*
 371 FUNCTION
 372         The HOWTO Macro
 373
 374 DESCRIPTION
 375         The HOWTO define is horrible and will go away.
 376
 377 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 378 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 379
 380 DESCRIPTION
 381         And will be replaced with the totally magic way. But for the
 382         moment, we are compatible, so do it this way.
 383
 384 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 385 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 386 .         NAME, FALSE, 0, 0, IN)
 387 .
 388
 389 DESCRIPTION
 390         This is used to fill in an empty howto entry in an array.
 391
 392 .#define EMPTY_HOWTO(C) \
 393 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 394 .         NULL, FALSE, 0, 0, FALSE)
 395 .
 396
 397 DESCRIPTION
 398         Helper routine to turn a symbol into a relocation value.
 399
 400 .#define HOWTO_PREPARE(relocation, symbol)               \
 401 .  {                                                     \
 402 .    if (symbol != NULL)                                 \
 403 .      {                                                 \
 404 .        if (bfd_is_com_section (symbol->section))       \
 405 .          {                                             \
 406 .            relocation = 0;                             \
 407 .          }                                             \
 408 .        else                                            \
 409 .          {                                             \
 410 .            relocation = symbol->value;                 \
 411 .          }                                             \
 412 .      }                                                 \
 413 .  }
 414 .
 415 */
 416
 417 /*
 418 FUNCTION
 419         bfd_get_reloc_size
 420
 421 SYNOPSIS
 422         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 423
 424 DESCRIPTION
 425         For a reloc_howto_type that operates on a fixed number of bytes,
 426         this returns the number of bytes operated on.
 427  */
 428
 429 unsigned int
 430 bfd_get_reloc_size (reloc_howto_type *howto)
 431 {
 432   switch (howto->size)
 433     {
 434     case 0: return 1;
 435     case 1: return 2;
 436     case 2: return 4;
 437     case 3: return 0;
 438     case 4: return 8;
 439     case 8: return 16;
 440     case -1: return 2;
 441     case -2: return 4;
 442     default: abort ();
 443     }
 444 }
 445
 446 /*
 447 TYPEDEF
 448         arelent_chain
 449
 450 DESCRIPTION
 451
 452         How relocs are tied together in an <<asection>>:
 453
 454 .typedef struct relent_chain
 455 .{
 456 .  arelent relent;
 457 .  struct relent_chain *next;
 458 .}
 459 .arelent_chain;
 460 .
 461 */
 462
 463 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 464 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 465
 466 /*
 467 FUNCTION
 468         bfd_check_overflow
 469
 470 SYNOPSIS
 471         bfd_reloc_status_type bfd_check_overflow
 472           (enum complain_overflow how,
 473            unsigned int bitsize,
 474            unsigned int rightshift,
 475            unsigned int addrsize,
 476            bfd_vma relocation);
 477
 478 DESCRIPTION
 479         Perform overflow checking on @var{relocation} which has
 480         @var{bitsize} significant bits and will be shifted right by
 481         @var{rightshift} bits, on a machine with addresses containing
 482         @var{addrsize} significant bits.  The result is either of
 483         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 484
 485 */
 486
 487 bfd_reloc_status_type
 488 bfd_check_overflow (enum complain_overflow how,
 489                     unsigned int bitsize,
 490                     unsigned int rightshift,
 491                     unsigned int addrsize,
 492                     bfd_vma relocation)
 493 {
 494   bfd_vma fieldmask, addrmask, signmask, ss, a;
 495   bfd_reloc_status_type flag = bfd_reloc_ok;
 496
 497   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 498      we'll be permissive: extra bits in the field mask will
 499      automatically extend the address mask for purposes of the
 500      overflow check.  */
 501   fieldmask = N_ONES (bitsize);
 502   signmask = ~fieldmask;
 503   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 504   a = (relocation & addrmask) >> rightshift;
 505
 506   switch (how)
 507     {
 508     case complain_overflow_dont:
 509       break;
 510
 511     case complain_overflow_signed:
 512       /* If any sign bits are set, all sign bits must be set.  That
 513          is, A must be a valid negative address after shifting.  */
 514       signmask = ~ (fieldmask >> 1);
 515       /* Fall thru */
 516
 517     case complain_overflow_bitfield:
 518       /* Bitfields are sometimes signed, sometimes unsigned.  We
 519          explicitly allow an address wrap too, which means a bitfield
 520          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 521          if the value has some, but not all, bits set outside the
 522          field.  */
 523       ss = a & signmask;
 524       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 525         flag = bfd_reloc_overflow;
 526       break;
 527
 528     case complain_overflow_unsigned:
 529       /* We have an overflow if the address does not fit in the field.  */
 530       if ((a & signmask) != 0)
 531         flag = bfd_reloc_overflow;
 532       break;
 533
 534     default:
 535       abort ();
 536     }
 537
 538   return flag;
 539 }
 540
 541 /*
 542 FUNCTION
 543         bfd_perform_relocation
 544
 545 SYNOPSIS
 546         bfd_reloc_status_type bfd_perform_relocation
 547           (bfd *abfd,
 548            arelent *reloc_entry,
 549            void *data,
 550            asection *input_section,
 551            bfd *output_bfd,
 552            char **error_message);
 553
 554 DESCRIPTION
 555         If @var{output_bfd} is supplied to this function, the
 556         generated image will be relocatable; the relocations are
 557         copied to the output file after they have been changed to
 558         reflect the new state of the world. There are two ways of
 559         reflecting the results of partial linkage in an output file:
 560         by modifying the output data in place, and by modifying the
 561         relocation record.  Some native formats (e.g., basic a.out and
 562         basic coff) have no way of specifying an addend in the
 563         relocation type, so the addend has to go in the output data.
 564         This is no big deal since in these formats the output data
 565         slot will always be big enough for the addend. Complex reloc
 566         types with addends were invented to solve just this problem.
 567         The @var{error_message} argument is set to an error message if
 568         this return @code{bfd_reloc_dangerous}.
 569
 570 */
 571
 572 bfd_reloc_status_type
 573 bfd_perform_relocation (bfd *abfd,
 574                         arelent *reloc_entry,
 575                         void *data,
 576                         asection *input_section,
 577                         bfd *output_bfd,
 578                         char **error_message)
 579 {
 580   bfd_vma relocation;
 581   bfd_reloc_status_type flag = bfd_reloc_ok;
 582   bfd_size_type octets;
 583   bfd_vma output_base = 0;
 584   reloc_howto_type *howto = reloc_entry->howto;
 585   asection *reloc_target_output_section;
 586   asymbol *symbol;
 587
 588   symbol = *(reloc_entry->sym_ptr_ptr);
 589   if (bfd_is_abs_section (symbol->section)
 590       && output_bfd != NULL)
 591     {
 592       reloc_entry->address += input_section->output_offset;
 593       return bfd_reloc_ok;
 594     }
 595
 596   /* PR 17512: file: 0f67f69d.  */
 597   if (howto == NULL)
 598     return bfd_reloc_undefined;
 599
 600   /* If we are not producing relocatable output, return an error if
 601      the symbol is not defined.  An undefined weak symbol is
 602      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 603   if (bfd_is_und_section (symbol->section)
 604       && (symbol->flags & BSF_WEAK) == 0
 605       && output_bfd == NULL)
 606     flag = bfd_reloc_undefined;
 607
 608   /* If there is a function supplied to handle this relocation type,
 609      call it.  It'll return `bfd_reloc_continue' if further processing
 610      can be done.  */
 611   if (howto->special_function)
 612     {
 613       bfd_reloc_status_type cont;
 614       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 615                                       input_section, output_bfd,
 616                                       error_message);
 617       if (cont != bfd_reloc_continue)
 618         return cont;
 619     }
 620
 621   /* Is the address of the relocation really within the section?
 622      Include the size of the reloc in the test for out of range addresses.
 623      PR 17512: file: c146ab8b, 46dff27f, 38e53ebf.  */
 624   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 625   if (octets + bfd_get_reloc_size (howto)
 626       > bfd_get_section_limit_octets (abfd, input_section))
 627     return bfd_reloc_outofrange;
 628
 629   /* Work out which section the relocation is targeted at and the
 630      initial relocation command value.  */
 631
 632   /* Get symbol value.  (Common symbols are special.)  */
 633   if (bfd_is_com_section (symbol->section))
 634     relocation = 0;
 635   else
 636     relocation = symbol->value;
 637
 638   reloc_target_output_section = symbol->section->output_section;
 639
 640   /* Convert input-section-relative symbol value to absolute.  */
 641   if ((output_bfd && ! howto->partial_inplace)
 642       || reloc_target_output_section == NULL)
 643     output_base = 0;
 644   else
 645     output_base = reloc_target_output_section->vma;
 646
 647   relocation += output_base + symbol->section->output_offset;
 648
 649   /* Add in supplied addend.  */
 650   relocation += reloc_entry->addend;
 651
 652   /* Here the variable relocation holds the final address of the
 653      symbol we are relocating against, plus any addend.  */
 654
 655   if (howto->pc_relative)
 656     {
 657       /* This is a PC relative relocation.  We want to set RELOCATION
 658          to the distance between the address of the symbol and the
 659          location.  RELOCATION is already the address of the symbol.
 660
 661          We start by subtracting the address of the section containing
 662          the location.
 663
 664          If pcrel_offset is set, we must further subtract the position
 665          of the location within the section.  Some targets arrange for
 666          the addend to be the negative of the position of the location
 667          within the section; for example, i386-aout does this.  For
 668          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 669          include the position of the location; for example, m88kbcs,
 670          or ELF.  For those targets, pcrel_offset is TRUE.
 671
 672          If we are producing relocatable output, then we must ensure
 673          that this reloc will be correctly computed when the final
 674          relocation is done.  If pcrel_offset is FALSE we want to wind
 675          up with the negative of the location within the section,
 676          which means we must adjust the existing addend by the change
 677          in the location within the section.  If pcrel_offset is TRUE
 678          we do not want to adjust the existing addend at all.
 679
 680          FIXME: This seems logical to me, but for the case of
 681          producing relocatable output it is not what the code
 682          actually does.  I don't want to change it, because it seems
 683          far too likely that something will break.  */
 684
 685       relocation -=
 686         input_section->output_section->vma + input_section->output_offset;
 687
 688       if (howto->pcrel_offset)
 689         relocation -= reloc_entry->address;
 690     }
 691
 692   if (output_bfd != NULL)
 693     {
 694       if (! howto->partial_inplace)
 695         {
 696           /* This is a partial relocation, and we want to apply the relocation
 697              to the reloc entry rather than the raw data. Modify the reloc
 698              inplace to reflect what we now know.  */
 699           reloc_entry->addend = relocation;
 700           reloc_entry->address += input_section->output_offset;
 701           return flag;
 702         }
 703       else
 704         {
 705           /* This is a partial relocation, but inplace, so modify the
 706              reloc record a bit.
 707
 708              If we've relocated with a symbol with a section, change
 709              into a ref to the section belonging to the symbol.  */
 710
 711           reloc_entry->address += input_section->output_offset;
 712
 713           /* WTF?? */
 714           if (abfd->xvec->flavour == bfd_target_coff_flavour
 715               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 716               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 717             {
 718               /* For m68k-coff, the addend was being subtracted twice during
 719                  relocation with -r.  Removing the line below this comment
 720                  fixes that problem; see PR 2953.
 721
 722 However, Ian wrote the following, regarding removing the line below,
 723 which explains why it is still enabled:  --djm
 724
 725 If you put a patch like that into BFD you need to check all the COFF
 726 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 727 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 728 problem in a different way.  There may very well be a reason that the
 729 code works as it does.
 730
 731 Hmmm.  The first obvious point is that bfd_perform_relocation should
 732 not have any tests that depend upon the flavour.  It's seem like
 733 entirely the wrong place for such a thing.  The second obvious point
 734 is that the current code ignores the reloc addend when producing
 735 relocatable output for COFF.  That's peculiar.  In fact, I really
 736 have no idea what the point of the line you want to remove is.
 737
 738 A typical COFF reloc subtracts the old value of the symbol and adds in
 739 the new value to the location in the object file (if it's a pc
 740 relative reloc it adds the difference between the symbol value and the
 741 location).  When relocating we need to preserve that property.
 742
 743 BFD handles this by setting the addend to the negative of the old
 744 value of the symbol.  Unfortunately it handles common symbols in a
 745 non-standard way (it doesn't subtract the old value) but that's a
 746 different story (we can't change it without losing backward
 747 compatibility with old object files) (coff-i386 does subtract the old
 748 value, to be compatible with existing coff-i386 targets, like SCO).
 749
 750 So everything works fine when not producing relocatable output.  When
 751 we are producing relocatable output, logically we should do exactly
 752 what we do when not producing relocatable output.  Therefore, your
 753 patch is correct.  In fact, it should probably always just set
 754 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 755 add the value into the object file.  This won't hurt the COFF code,
 756 which doesn't use the addend; I'm not sure what it will do to other
 757 formats (the thing to check for would be whether any formats both use
 758 the addend and set partial_inplace).
 759
 760 When I wanted to make coff-i386 produce relocatable output, I ran
 761 into the problem that you are running into: I wanted to remove that
 762 line.  Rather than risk it, I made the coff-i386 relocs use a special
 763 function; it's coff_i386_reloc in coff-i386.c.  The function
 764 specifically adds the addend field into the object file, knowing that
 765 bfd_perform_relocation is not going to.  If you remove that line, then
 766 coff-i386.c will wind up adding the addend field in twice.  It's
 767 trivial to fix; it just needs to be done.
 768
 769 The problem with removing the line is just that it may break some
 770 working code.  With BFD it's hard to be sure of anything.  The right
 771 way to deal with this is simply to build and test at least all the
 772 supported COFF targets.  It should be straightforward if time and disk
 773 space consuming.  For each target:
 774     1) build the linker
 775     2) generate some executable, and link it using -r (I would
 776        probably use paranoia.o and link against newlib/libc.a, which
 777        for all the supported targets would be available in
 778        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 779     3) make the change to reloc.c
 780     4) rebuild the linker
 781     5) repeat step 2
 782     6) if the resulting object files are the same, you have at least
 783        made it no worse
 784     7) if they are different you have to figure out which version is
 785        right
 786 */
 787               relocation -= reloc_entry->addend;
 788               reloc_entry->addend = 0;
 789             }
 790           else
 791             {
 792               reloc_entry->addend = relocation;
 793             }
 794         }
 795     }
 796
 797   /* FIXME: This overflow checking is incomplete, because the value
 798      might have overflowed before we get here.  For a correct check we
 799      need to compute the value in a size larger than bitsize, but we
 800      can't reasonably do that for a reloc the same size as a host
 801      machine word.
 802      FIXME: We should also do overflow checking on the result after
 803      adding in the value contained in the object file.  */
 804   if (howto->complain_on_overflow != complain_overflow_dont
 805       && flag == bfd_reloc_ok)
 806     flag = bfd_check_overflow (howto->complain_on_overflow,
 807                                howto->bitsize,
 808                                howto->rightshift,
 809                                bfd_arch_bits_per_address (abfd),
 810                                relocation);
 811
 812   /* Either we are relocating all the way, or we don't want to apply
 813      the relocation to the reloc entry (probably because there isn't
 814      any room in the output format to describe addends to relocs).  */
 815
 816   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 817      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 818      following program:
 819
 820      struct str
 821      {
 822        unsigned int i0;
 823      } s = { 0 };
 824
 825      int
 826      main ()
 827      {
 828        unsigned long x;
 829
 830        x = 0x100000000;
 831        x <<= (unsigned long) s.i0;
 832        if (x == 0)
 833          printf ("failed\n");
 834        else
 835          printf ("succeeded (%lx)\n", x);
 836      }
 837      */
 838
 839   relocation >>= (bfd_vma) howto->rightshift;
 840
 841   /* Shift everything up to where it's going to be used.  */
 842   relocation <<= (bfd_vma) howto->bitpos;
 843
 844   /* Wait for the day when all have the mask in them.  */
 845
 846   /* What we do:
 847      i instruction to be left alone
 848      o offset within instruction
 849      r relocation offset to apply
 850      S src mask
 851      D dst mask
 852      N ~dst mask
 853      A part 1
 854      B part 2
 855      R result
 856
 857      Do this:
 858      ((  i i i i i o o o o o  from bfd_get<size>
 859      and           S S S S S) to get the size offset we want
 860      +   r r r r r r r r r r) to get the final value to place
 861      and           D D D D D  to chop to right size
 862      -----------------------
 863      =             A A A A A
 864      And this:
 865      (   i i i i i o o o o o  from bfd_get<size>
 866      and N N N N N          ) get instruction
 867      -----------------------
 868      =   B B B B B
 869
 870      And then:
 871      (   B B B B B
 872      or            A A A A A)
 873      -----------------------
 874      =   R R R R R R R R R R  put into bfd_put<size>
 875      */
 876
 877 #define DOIT(x) \
 878   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 879
 880   switch (howto->size)
 881     {
 882     case 0:
 883       {
 884         char x = bfd_get_8 (abfd, (char *) data + octets);
 885         DOIT (x);
 886         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 887       }
 888       break;
 889
 890     case 1:
 891       {
 892         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 893         DOIT (x);
 894         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 895       }
 896       break;
 897     case 2:
 898       {
 899         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 900         DOIT (x);
 901         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 902       }
 903       break;
 904     case -2:
 905       {
 906         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 907         relocation = -relocation;
 908         DOIT (x);
 909         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 910       }
 911       break;
 912
 913     case -1:
 914       {
 915         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 916         relocation = -relocation;
 917         DOIT (x);
 918         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 919       }
 920       break;
 921
 922     case 3:
 923       /* Do nothing */
 924       break;
 925
 926     case 4:
 927 #ifdef BFD64
 928       {
 929         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 930         DOIT (x);
 931         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 932       }
 933 #else
 934       abort ();
 935 #endif
 936       break;
 937     default:
 938       return bfd_reloc_other;
 939     }
 940
 941   return flag;
 942 }
 943
 944 /*
 945 FUNCTION
 946         bfd_install_relocation
 947
 948 SYNOPSIS
 949         bfd_reloc_status_type bfd_install_relocation
 950           (bfd *abfd,
 951            arelent *reloc_entry,
 952            void *data, bfd_vma data_start,
 953            asection *input_section,
 954            char **error_message);
 955
 956 DESCRIPTION
 957         This looks remarkably like <<bfd_perform_relocation>>, except it
 958         does not expect that the section contents have been filled in.
 959         I.e., it's suitable for use when creating, rather than applying
 960         a relocation.
 961
 962         For now, this function should be considered reserved for the
 963         assembler.
 964 */
 965
 966 bfd_reloc_status_type
 967 bfd_install_relocation (bfd *abfd,
 968                         arelent *reloc_entry,
 969                         void *data_start,
 970                         bfd_vma data_start_offset,
 971                         asection *input_section,
 972                         char **error_message)
 973 {
 974   bfd_vma relocation;
 975   bfd_reloc_status_type flag = bfd_reloc_ok;
 976   bfd_size_type octets;
 977   bfd_vma output_base = 0;
 978   reloc_howto_type *howto = reloc_entry->howto;
 979   asection *reloc_target_output_section;
 980   asymbol *symbol;
 981   bfd_byte *data;
 982
 983   symbol = *(reloc_entry->sym_ptr_ptr);
 984   if (bfd_is_abs_section (symbol->section))
 985     {
 986       reloc_entry->address += input_section->output_offset;
 987       return bfd_reloc_ok;
 988     }
 989
 990   /* If there is a function supplied to handle this relocation type,
 991      call it.  It'll return `bfd_reloc_continue' if further processing
 992      can be done.  */
 993   if (howto->special_function)
 994     {
 995       bfd_reloc_status_type cont;
 996
 997       /* XXX - The special_function calls haven't been fixed up to deal
 998          with creating new relocations and section contents.  */
 999       cont = howto->special_function (abfd, reloc_entry, symbol,
1000                                       /* XXX - Non-portable! */
1001                                       ((bfd_byte *) data_start
1002                                        - data_start_offset),
1003                                       input_section, abfd, error_message);
1004       if (cont != bfd_reloc_continue)
1005         return cont;
1006     }
1007
1008   /* Is the address of the relocation really within the section?  */
1009   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
1010   if (octets + bfd_get_reloc_size (howto)
1011       > bfd_get_section_limit_octets (abfd, input_section))
1012     return bfd_reloc_outofrange;
1013
1014   /* Work out which section the relocation is targeted at and the
1015      initial relocation command value.  */
1016
1017   /* Get symbol value.  (Common symbols are special.)  */
1018   if (bfd_is_com_section (symbol->section))
1019     relocation = 0;
1020   else
1021     relocation = symbol->value;
1022
1023   reloc_target_output_section = symbol->section->output_section;
1024
1025   /* Convert input-section-relative symbol value to absolute.  */
1026   if (! howto->partial_inplace)
1027     output_base = 0;
1028   else
1029     output_base = reloc_target_output_section->vma;
1030
1031   relocation += output_base + symbol->section->output_offset;
1032
1033   /* Add in supplied addend.  */
1034   relocation += reloc_entry->addend;
1035
1036   /* Here the variable relocation holds the final address of the
1037      symbol we are relocating against, plus any addend.  */
1038
1039   if (howto->pc_relative)
1040     {
1041       /* This is a PC relative relocation.  We want to set RELOCATION
1042          to the distance between the address of the symbol and the
1043          location.  RELOCATION is already the address of the symbol.
1044
1045          We start by subtracting the address of the section containing
1046          the location.
1047
1048          If pcrel_offset is set, we must further subtract the position
1049          of the location within the section.  Some targets arrange for
1050          the addend to be the negative of the position of the location
1051          within the section; for example, i386-aout does this.  For
1052          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1053          include the position of the location; for example, m88kbcs,
1054          or ELF.  For those targets, pcrel_offset is TRUE.
1055
1056          If we are producing relocatable output, then we must ensure
1057          that this reloc will be correctly computed when the final
1058          relocation is done.  If pcrel_offset is FALSE we want to wind
1059          up with the negative of the location within the section,
1060          which means we must adjust the existing addend by the change
1061          in the location within the section.  If pcrel_offset is TRUE
1062          we do not want to adjust the existing addend at all.
1063
1064          FIXME: This seems logical to me, but for the case of
1065          producing relocatable output it is not what the code
1066          actually does.  I don't want to change it, because it seems
1067          far too likely that something will break.  */
1068
1069       relocation -=
1070         input_section->output_section->vma + input_section->output_offset;
1071
1072       if (howto->pcrel_offset && howto->partial_inplace)
1073         relocation -= reloc_entry->address;
1074     }
1075
1076   if (! howto->partial_inplace)
1077     {
1078       /* This is a partial relocation, and we want to apply the relocation
1079          to the reloc entry rather than the raw data. Modify the reloc
1080          inplace to reflect what we now know.  */
1081       reloc_entry->addend = relocation;
1082       reloc_entry->address += input_section->output_offset;
1083       return flag;
1084     }
1085   else
1086     {
1087       /* This is a partial relocation, but inplace, so modify the
1088          reloc record a bit.
1089
1090          If we've relocated with a symbol with a section, change
1091          into a ref to the section belonging to the symbol.  */
1092       reloc_entry->address += input_section->output_offset;
1093
1094       /* WTF?? */
1095       if (abfd->xvec->flavour == bfd_target_coff_flavour
1096           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1097           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1098         {
1099
1100           /* For m68k-coff, the addend was being subtracted twice during
1101              relocation with -r.  Removing the line below this comment
1102              fixes that problem; see PR 2953.
1103
1104 However, Ian wrote the following, regarding removing the line below,
1105 which explains why it is still enabled:  --djm
1106
1107 If you put a patch like that into BFD you need to check all the COFF
1108 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1109 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1110 problem in a different way.  There may very well be a reason that the
1111 code works as it does.
1112
1113 Hmmm.  The first obvious point is that bfd_install_relocation should
1114 not have any tests that depend upon the flavour.  It's seem like
1115 entirely the wrong place for such a thing.  The second obvious point
1116 is that the current code ignores the reloc addend when producing
1117 relocatable output for COFF.  That's peculiar.  In fact, I really
1118 have no idea what the point of the line you want to remove is.
1119
1120 A typical COFF reloc subtracts the old value of the symbol and adds in
1121 the new value to the location in the object file (if it's a pc
1122 relative reloc it adds the difference between the symbol value and the
1123 location).  When relocating we need to preserve that property.
1124
1125 BFD handles this by setting the addend to the negative of the old
1126 value of the symbol.  Unfortunately it handles common symbols in a
1127 non-standard way (it doesn't subtract the old value) but that's a
1128 different story (we can't change it without losing backward
1129 compatibility with old object files) (coff-i386 does subtract the old
1130 value, to be compatible with existing coff-i386 targets, like SCO).
1131
1132 So everything works fine when not producing relocatable output.  When
1133 we are producing relocatable output, logically we should do exactly
1134 what we do when not producing relocatable output.  Therefore, your
1135 patch is correct.  In fact, it should probably always just set
1136 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1137 add the value into the object file.  This won't hurt the COFF code,
1138 which doesn't use the addend; I'm not sure what it will do to other
1139 formats (the thing to check for would be whether any formats both use
1140 the addend and set partial_inplace).
1141
1142 When I wanted to make coff-i386 produce relocatable output, I ran
1143 into the problem that you are running into: I wanted to remove that
1144 line.  Rather than risk it, I made the coff-i386 relocs use a special
1145 function; it's coff_i386_reloc in coff-i386.c.  The function
1146 specifically adds the addend field into the object file, knowing that
1147 bfd_install_relocation is not going to.  If you remove that line, then
1148 coff-i386.c will wind up adding the addend field in twice.  It's
1149 trivial to fix; it just needs to be done.
1150
1151 The problem with removing the line is just that it may break some
1152 working code.  With BFD it's hard to be sure of anything.  The right
1153 way to deal with this is simply to build and test at least all the
1154 supported COFF targets.  It should be straightforward if time and disk
1155 space consuming.  For each target:
1156     1) build the linker
1157     2) generate some executable, and link it using -r (I would
1158        probably use paranoia.o and link against newlib/libc.a, which
1159        for all the supported targets would be available in
1160        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1161     3) make the change to reloc.c
1162     4) rebuild the linker
1163     5) repeat step 2
1164     6) if the resulting object files are the same, you have at least
1165        made it no worse
1166     7) if they are different you have to figure out which version is
1167        right.  */
1168           relocation -= reloc_entry->addend;
1169           /* FIXME: There should be no target specific code here...  */
1170           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1171             reloc_entry->addend = 0;
1172         }
1173       else
1174         {
1175           reloc_entry->addend = relocation;
1176         }
1177     }
1178
1179   /* FIXME: This overflow checking is incomplete, because the value
1180      might have overflowed before we get here.  For a correct check we
1181      need to compute the value in a size larger than bitsize, but we
1182      can't reasonably do that for a reloc the same size as a host
1183      machine word.
1184      FIXME: We should also do overflow checking on the result after
1185      adding in the value contained in the object file.  */
1186   if (howto->complain_on_overflow != complain_overflow_dont)
1187     flag = bfd_check_overflow (howto->complain_on_overflow,
1188                                howto->bitsize,
1189                                howto->rightshift,
1190                                bfd_arch_bits_per_address (abfd),
1191                                relocation);
1192
1193   /* Either we are relocating all the way, or we don't want to apply
1194      the relocation to the reloc entry (probably because there isn't
1195      any room in the output format to describe addends to relocs).  */
1196
1197   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1198      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1199      following program:
1200
1201      struct str
1202      {
1203        unsigned int i0;
1204      } s = { 0 };
1205
1206      int
1207      main ()
1208      {
1209        unsigned long x;
1210
1211        x = 0x100000000;
1212        x <<= (unsigned long) s.i0;
1213        if (x == 0)
1214          printf ("failed\n");
1215        else
1216          printf ("succeeded (%lx)\n", x);
1217      }
1218      */
1219
1220   relocation >>= (bfd_vma) howto->rightshift;
1221
1222   /* Shift everything up to where it's going to be used.  */
1223   relocation <<= (bfd_vma) howto->bitpos;
1224
1225   /* Wait for the day when all have the mask in them.  */
1226
1227   /* What we do:
1228      i instruction to be left alone
1229      o offset within instruction
1230      r relocation offset to apply
1231      S src mask
1232      D dst mask
1233      N ~dst mask
1234      A part 1
1235      B part 2
1236      R result
1237
1238      Do this:
1239      ((  i i i i i o o o o o  from bfd_get<size>
1240      and           S S S S S) to get the size offset we want
1241      +   r r r r r r r r r r) to get the final value to place
1242      and           D D D D D  to chop to right size
1243      -----------------------
1244      =             A A A A A
1245      And this:
1246      (   i i i i i o o o o o  from bfd_get<size>
1247      and N N N N N          ) get instruction
1248      -----------------------
1249      =   B B B B B
1250
1251      And then:
1252      (   B B B B B
1253      or            A A A A A)
1254      -----------------------
1255      =   R R R R R R R R R R  put into bfd_put<size>
1256      */
1257
1258 #define DOIT(x) \
1259   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1260
1261   data = (bfd_byte *) data_start + (octets - data_start_offset);
1262
1263   switch (howto->size)
1264     {
1265     case 0:
1266       {
1267         char x = bfd_get_8 (abfd, data);
1268         DOIT (x);
1269         bfd_put_8 (abfd, x, data);
1270       }
1271       break;
1272
1273     case 1:
1274       {
1275         short x = bfd_get_16 (abfd, data);
1276         DOIT (x);
1277         bfd_put_16 (abfd, (bfd_vma) x, data);
1278       }
1279       break;
1280     case 2:
1281       {
1282         long x = bfd_get_32 (abfd, data);
1283         DOIT (x);
1284         bfd_put_32 (abfd, (bfd_vma) x, data);
1285       }
1286       break;
1287     case -2:
1288       {
1289         long x = bfd_get_32 (abfd, data);
1290         relocation = -relocation;
1291         DOIT (x);
1292         bfd_put_32 (abfd, (bfd_vma) x, data);
1293       }
1294       break;
1295
1296     case 3:
1297       /* Do nothing */
1298       break;
1299
1300     case 4:
1301       {
1302         bfd_vma x = bfd_get_64 (abfd, data);
1303         DOIT (x);
1304         bfd_put_64 (abfd, x, data);
1305       }
1306       break;
1307     default:
1308       return bfd_reloc_other;
1309     }
1310
1311   return flag;
1312 }
1313
1314 /* This relocation routine is used by some of the backend linkers.
1315    They do not construct asymbol or arelent structures, so there is no
1316    reason for them to use bfd_perform_relocation.  Also,
1317    bfd_perform_relocation is so hacked up it is easier to write a new
1318    function than to try to deal with it.
1319
1320    This routine does a final relocation.  Whether it is useful for a
1321    relocatable link depends upon how the object format defines
1322    relocations.
1323
1324    FIXME: This routine ignores any special_function in the HOWTO,
1325    since the existing special_function values have been written for
1326    bfd_perform_relocation.
1327
1328    HOWTO is the reloc howto information.
1329    INPUT_BFD is the BFD which the reloc applies to.
1330    INPUT_SECTION is the section which the reloc applies to.
1331    CONTENTS is the contents of the section.
1332    ADDRESS is the address of the reloc within INPUT_SECTION.
1333    VALUE is the value of the symbol the reloc refers to.
1334    ADDEND is the addend of the reloc.  */
1335
1336 bfd_reloc_status_type
1337 _bfd_final_link_relocate (reloc_howto_type *howto,
1338                           bfd *input_bfd,
1339                           asection *input_section,
1340                           bfd_byte *contents,
1341                           bfd_vma address,
1342                           bfd_vma value,
1343                           bfd_vma addend)
1344 {
1345   bfd_vma relocation;
1346   bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
1347
1348   /* Sanity check the address.  */
1349   if (octets + bfd_get_reloc_size (howto)
1350       > bfd_get_section_limit_octets (input_bfd, input_section))
1351     return bfd_reloc_outofrange;
1352
1353   /* This function assumes that we are dealing with a basic relocation
1354      against a symbol.  We want to compute the value of the symbol to
1355      relocate to.  This is just VALUE, the value of the symbol, plus
1356      ADDEND, any addend associated with the reloc.  */
1357   relocation = value + addend;
1358
1359   /* If the relocation is PC relative, we want to set RELOCATION to
1360      the distance between the symbol (currently in RELOCATION) and the
1361      location we are relocating.  Some targets (e.g., i386-aout)
1362      arrange for the contents of the section to be the negative of the
1363      offset of the location within the section; for such targets
1364      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1365      simply leave the contents of the section as zero; for such
1366      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1367      need to subtract out the offset of the location within the
1368      section (which is just ADDRESS).  */
1369   if (howto->pc_relative)
1370     {
1371       relocation -= (input_section->output_section->vma
1372                      + input_section->output_offset);
1373       if (howto->pcrel_offset)
1374         relocation -= address;
1375     }
1376
1377   return _bfd_relocate_contents (howto, input_bfd, relocation,
1378                                  contents + address);
1379 }
1380
1381 /* Relocate a given location using a given value and howto.  */
1382
1383 bfd_reloc_status_type
1384 _bfd_relocate_contents (reloc_howto_type *howto,
1385                         bfd *input_bfd,
1386                         bfd_vma relocation,
1387                         bfd_byte *location)
1388 {
1389   int size;
1390   bfd_vma x = 0;
1391   bfd_reloc_status_type flag;
1392   unsigned int rightshift = howto->rightshift;
1393   unsigned int bitpos = howto->bitpos;
1394
1395   /* If the size is negative, negate RELOCATION.  This isn't very
1396      general.  */
1397   if (howto->size < 0)
1398     relocation = -relocation;
1399
1400   /* Get the value we are going to relocate.  */
1401   size = bfd_get_reloc_size (howto);
1402   switch (size)
1403     {
1404     default:
1405       abort ();
1406     case 0:
1407       return bfd_reloc_ok;
1408     case 1:
1409       x = bfd_get_8 (input_bfd, location);
1410       break;
1411     case 2:
1412       x = bfd_get_16 (input_bfd, location);
1413       break;
1414     case 4:
1415       x = bfd_get_32 (input_bfd, location);
1416       break;
1417     case 8:
1418 #ifdef BFD64
1419       x = bfd_get_64 (input_bfd, location);
1420 #else
1421       abort ();
1422 #endif
1423       break;
1424     }
1425
1426   /* Check for overflow.  FIXME: We may drop bits during the addition
1427      which we don't check for.  We must either check at every single
1428      operation, which would be tedious, or we must do the computations
1429      in a type larger than bfd_vma, which would be inefficient.  */
1430   flag = bfd_reloc_ok;
1431   if (howto->complain_on_overflow != complain_overflow_dont)
1432     {
1433       bfd_vma addrmask, fieldmask, signmask, ss;
1434       bfd_vma a, b, sum;
1435
1436       /* Get the values to be added together.  For signed and unsigned
1437          relocations, we assume that all values should be truncated to
1438          the size of an address.  For bitfields, all the bits matter.
1439          See also bfd_check_overflow.  */
1440       fieldmask = N_ONES (howto->bitsize);
1441       signmask = ~fieldmask;
1442       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1443                   | (fieldmask << rightshift));
1444       a = (relocation & addrmask) >> rightshift;
1445       b = (x & howto->src_mask & addrmask) >> bitpos;
1446       addrmask >>= rightshift;
1447
1448       switch (howto->complain_on_overflow)
1449         {
1450         case complain_overflow_signed:
1451           /* If any sign bits are set, all sign bits must be set.
1452              That is, A must be a valid negative address after
1453              shifting.  */
1454           signmask = ~(fieldmask >> 1);
1455           /* Fall thru */
1456
1457         case complain_overflow_bitfield:
1458           /* Much like the signed check, but for a field one bit
1459              wider.  We allow a bitfield to represent numbers in the
1460              range -2**n to 2**n-1, where n is the number of bits in the
1461              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1462              can't overflow, which is exactly what we want.  */
1463           ss = a & signmask;
1464           if (ss != 0 && ss != (addrmask & signmask))
1465             flag = bfd_reloc_overflow;
1466
1467           /* We only need this next bit of code if the sign bit of B
1468              is below the sign bit of A.  This would only happen if
1469              SRC_MASK had fewer bits than BITSIZE.  Note that if
1470              SRC_MASK has more bits than BITSIZE, we can get into
1471              trouble; we would need to verify that B is in range, as
1472              we do for A above.  */
1473           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1474           ss >>= bitpos;
1475
1476           /* Set all the bits above the sign bit.  */
1477           b = (b ^ ss) - ss;
1478
1479           /* Now we can do the addition.  */
1480           sum = a + b;
1481
1482           /* See if the result has the correct sign.  Bits above the
1483              sign bit are junk now; ignore them.  If the sum is
1484              positive, make sure we did not have all negative inputs;
1485              if the sum is negative, make sure we did not have all
1486              positive inputs.  The test below looks only at the sign
1487              bits, and it really just
1488                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1489
1490              We mask with addrmask here to explicitly allow an address
1491              wrap-around.  The Linux kernel relies on it, and it is
1492              the only way to write assembler code which can run when
1493              loaded at a location 0x80000000 away from the location at
1494              which it is linked.  */
1495           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1496             flag = bfd_reloc_overflow;
1497           break;
1498
1499         case complain_overflow_unsigned:
1500           /* Checking for an unsigned overflow is relatively easy:
1501              trim the addresses and add, and trim the result as well.
1502              Overflow is normally indicated when the result does not
1503              fit in the field.  However, we also need to consider the
1504              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1505              input is 0x80000000, and bfd_vma is only 32 bits; then we
1506              will get sum == 0, but there is an overflow, since the
1507              inputs did not fit in the field.  Instead of doing a
1508              separate test, we can check for this by or-ing in the
1509              operands when testing for the sum overflowing its final
1510              field.  */
1511           sum = (a + b) & addrmask;
1512           if ((a | b | sum) & signmask)
1513             flag = bfd_reloc_overflow;
1514           break;
1515
1516         default:
1517           abort ();
1518         }
1519     }
1520
1521   /* Put RELOCATION in the right bits.  */
1522   relocation >>= (bfd_vma) rightshift;
1523   relocation <<= (bfd_vma) bitpos;
1524
1525   /* Add RELOCATION to the right bits of X.  */
1526   x = ((x & ~howto->dst_mask)
1527        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1528
1529   /* Put the relocated value back in the object file.  */
1530   switch (size)
1531     {
1532     default:
1533       abort ();
1534     case 1:
1535       bfd_put_8 (input_bfd, x, location);
1536       break;
1537     case 2:
1538       bfd_put_16 (input_bfd, x, location);
1539       break;
1540     case 4:
1541       bfd_put_32 (input_bfd, x, location);
1542       break;
1543     case 8:
1544 #ifdef BFD64
1545       bfd_put_64 (input_bfd, x, location);
1546 #else
1547       abort ();
1548 #endif
1549       break;
1550     }
1551
1552   return flag;
1553 }
1554
1555 /* Clear a given location using a given howto, by applying a fixed relocation
1556    value and discarding any in-place addend.  This is used for fixed-up
1557    relocations against discarded symbols, to make ignorable debug or unwind
1558    information more obvious.  */
1559
1560 void
1561 _bfd_clear_contents (reloc_howto_type *howto,
1562                      bfd *input_bfd,
1563                      asection *input_section,
1564                      bfd_byte *location)
1565 {
1566   int size;
1567   bfd_vma x = 0;
1568
1569   /* Get the value we are going to relocate.  */
1570   size = bfd_get_reloc_size (howto);
1571   switch (size)
1572     {
1573     default:
1574       abort ();
1575     case 0:
1576       return;
1577     case 1:
1578       x = bfd_get_8 (input_bfd, location);
1579       break;
1580     case 2:
1581       x = bfd_get_16 (input_bfd, location);
1582       break;
1583     case 4:
1584       x = bfd_get_32 (input_bfd, location);
1585       break;
1586     case 8:
1587 #ifdef BFD64
1588       x = bfd_get_64 (input_bfd, location);
1589 #else
1590       abort ();
1591 #endif
1592       break;
1593     }
1594
1595   /* Zero out the unwanted bits of X.  */
1596   x &= ~howto->dst_mask;
1597
1598   /* For a range list, use 1 instead of 0 as placeholder.  0
1599      would terminate the list, hiding any later entries.  */
1600   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1601               ".debug_ranges") == 0
1602       && (howto->dst_mask & 1) != 0)
1603     x |= 1;
1604
1605   /* Put the relocated value back in the object file.  */
1606   switch (size)
1607     {
1608     default:
1609     case 0:
1610       abort ();
1611     case 1:
1612       bfd_put_8 (input_bfd, x, location);
1613       break;
1614     case 2:
1615       bfd_put_16 (input_bfd, x, location);
1616       break;
1617     case 4:
1618       bfd_put_32 (input_bfd, x, location);
1619       break;
1620     case 8:
1621 #ifdef BFD64
1622       bfd_put_64 (input_bfd, x, location);
1623 #else
1624       abort ();
1625 #endif
1626       break;
1627     }
1628 }
1629
1630 /*
1631 DOCDD
1632 INODE
1633         howto manager,  , typedef arelent, Relocations
1634
1635 SUBSECTION
1636         The howto manager
1637
1638         When an application wants to create a relocation, but doesn't
1639         know what the target machine might call it, it can find out by
1640         using this bit of code.
1641
1642 */
1643
1644 /*
1645 TYPEDEF
1646         bfd_reloc_code_type
1647
1648 DESCRIPTION
1649         The insides of a reloc code.  The idea is that, eventually, there
1650         will be one enumerator for every type of relocation we ever do.
1651         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1652         return a howto pointer.
1653
1654         This does mean that the application must determine the correct
1655         enumerator value; you can't get a howto pointer from a random set
1656         of attributes.
1657
1658 SENUM
1659    bfd_reloc_code_real
1660
1661 ENUM
1662   BFD_RELOC_64
1663 ENUMX
1664   BFD_RELOC_32
1665 ENUMX
1666   BFD_RELOC_26
1667 ENUMX
1668   BFD_RELOC_24
1669 ENUMX
1670   BFD_RELOC_16
1671 ENUMX
1672   BFD_RELOC_14
1673 ENUMX
1674   BFD_RELOC_8
1675 ENUMDOC
1676   Basic absolute relocations of N bits.
1677
1678 ENUM
1679   BFD_RELOC_64_PCREL
1680 ENUMX
1681   BFD_RELOC_32_PCREL
1682 ENUMX
1683   BFD_RELOC_24_PCREL
1684 ENUMX
1685   BFD_RELOC_16_PCREL
1686 ENUMX
1687   BFD_RELOC_12_PCREL
1688 ENUMX
1689   BFD_RELOC_8_PCREL
1690 ENUMDOC
1691   PC-relative relocations.  Sometimes these are relative to the address
1692 of the relocation itself; sometimes they are relative to the start of
1693 the section containing the relocation.  It depends on the specific target.
1694
1695 The 24-bit relocation is used in some Intel 960 configurations.
1696
1697 ENUM
1698   BFD_RELOC_32_SECREL
1699 ENUMDOC
1700   Section relative relocations.  Some targets need this for DWARF2.
1701
1702 ENUM
1703   BFD_RELOC_32_GOT_PCREL
1704 ENUMX
1705   BFD_RELOC_16_GOT_PCREL
1706 ENUMX
1707   BFD_RELOC_8_GOT_PCREL
1708 ENUMX
1709   BFD_RELOC_32_GOTOFF
1710 ENUMX
1711   BFD_RELOC_16_GOTOFF
1712 ENUMX
1713   BFD_RELOC_LO16_GOTOFF
1714 ENUMX
1715   BFD_RELOC_HI16_GOTOFF
1716 ENUMX
1717   BFD_RELOC_HI16_S_GOTOFF
1718 ENUMX
1719   BFD_RELOC_8_GOTOFF
1720 ENUMX
1721   BFD_RELOC_64_PLT_PCREL
1722 ENUMX
1723   BFD_RELOC_32_PLT_PCREL
1724 ENUMX
1725   BFD_RELOC_24_PLT_PCREL
1726 ENUMX
1727   BFD_RELOC_16_PLT_PCREL
1728 ENUMX
1729   BFD_RELOC_8_PLT_PCREL
1730 ENUMX
1731   BFD_RELOC_64_PLTOFF
1732 ENUMX
1733   BFD_RELOC_32_PLTOFF
1734 ENUMX
1735   BFD_RELOC_16_PLTOFF
1736 ENUMX
1737   BFD_RELOC_LO16_PLTOFF
1738 ENUMX
1739   BFD_RELOC_HI16_PLTOFF
1740 ENUMX
1741   BFD_RELOC_HI16_S_PLTOFF
1742 ENUMX
1743   BFD_RELOC_8_PLTOFF
1744 ENUMDOC
1745   For ELF.
1746
1747 ENUM
1748   BFD_RELOC_SIZE32
1749 ENUMX
1750   BFD_RELOC_SIZE64
1751 ENUMDOC
1752   Size relocations.
1753
1754 ENUM
1755   BFD_RELOC_68K_GLOB_DAT
1756 ENUMX
1757   BFD_RELOC_68K_JMP_SLOT
1758 ENUMX
1759   BFD_RELOC_68K_RELATIVE
1760 ENUMX
1761   BFD_RELOC_68K_TLS_GD32
1762 ENUMX
1763   BFD_RELOC_68K_TLS_GD16
1764 ENUMX
1765   BFD_RELOC_68K_TLS_GD8
1766 ENUMX
1767   BFD_RELOC_68K_TLS_LDM32
1768 ENUMX
1769   BFD_RELOC_68K_TLS_LDM16
1770 ENUMX
1771   BFD_RELOC_68K_TLS_LDM8
1772 ENUMX
1773   BFD_RELOC_68K_TLS_LDO32
1774 ENUMX
1775   BFD_RELOC_68K_TLS_LDO16
1776 ENUMX
1777   BFD_RELOC_68K_TLS_LDO8
1778 ENUMX
1779   BFD_RELOC_68K_TLS_IE32
1780 ENUMX
1781   BFD_RELOC_68K_TLS_IE16
1782 ENUMX
1783   BFD_RELOC_68K_TLS_IE8
1784 ENUMX
1785   BFD_RELOC_68K_TLS_LE32
1786 ENUMX
1787   BFD_RELOC_68K_TLS_LE16
1788 ENUMX
1789   BFD_RELOC_68K_TLS_LE8
1790 ENUMDOC
1791   Relocations used by 68K ELF.
1792
1793 ENUM
1794   BFD_RELOC_32_BASEREL
1795 ENUMX
1796   BFD_RELOC_16_BASEREL
1797 ENUMX
1798   BFD_RELOC_LO16_BASEREL
1799 ENUMX
1800   BFD_RELOC_HI16_BASEREL
1801 ENUMX
1802   BFD_RELOC_HI16_S_BASEREL
1803 ENUMX
1804   BFD_RELOC_8_BASEREL
1805 ENUMX
1806   BFD_RELOC_RVA
1807 ENUMDOC
1808   Linkage-table relative.
1809
1810 ENUM
1811   BFD_RELOC_8_FFnn
1812 ENUMDOC
1813   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1814
1815 ENUM
1816   BFD_RELOC_32_PCREL_S2
1817 ENUMX
1818   BFD_RELOC_16_PCREL_S2
1819 ENUMX
1820   BFD_RELOC_23_PCREL_S2
1821 ENUMDOC
1822   These PC-relative relocations are stored as word displacements --
1823 i.e., byte displacements shifted right two bits.  The 30-bit word
1824 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1825 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1826 signed 16-bit displacement is used on the MIPS, and the 23-bit
1827 displacement is used on the Alpha.
1828
1829 ENUM
1830   BFD_RELOC_HI22
1831 ENUMX
1832   BFD_RELOC_LO10
1833 ENUMDOC
1834   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1835 the target word.  These are used on the SPARC.
1836
1837 ENUM
1838   BFD_RELOC_GPREL16
1839 ENUMX
1840   BFD_RELOC_GPREL32
1841 ENUMDOC
1842   For systems that allocate a Global Pointer register, these are
1843 displacements off that register.  These relocation types are
1844 handled specially, because the value the register will have is
1845 decided relatively late.
1846
1847 ENUM
1848   BFD_RELOC_I960_CALLJ
1849 ENUMDOC
1850   Reloc types used for i960/b.out.
1851
1852 ENUM
1853   BFD_RELOC_NONE
1854 ENUMX
1855   BFD_RELOC_SPARC_WDISP22
1856 ENUMX
1857   BFD_RELOC_SPARC22
1858 ENUMX
1859   BFD_RELOC_SPARC13
1860 ENUMX
1861   BFD_RELOC_SPARC_GOT10
1862 ENUMX
1863   BFD_RELOC_SPARC_GOT13
1864 ENUMX
1865   BFD_RELOC_SPARC_GOT22
1866 ENUMX
1867   BFD_RELOC_SPARC_PC10
1868 ENUMX
1869   BFD_RELOC_SPARC_PC22
1870 ENUMX
1871   BFD_RELOC_SPARC_WPLT30
1872 ENUMX
1873   BFD_RELOC_SPARC_COPY
1874 ENUMX
1875   BFD_RELOC_SPARC_GLOB_DAT
1876 ENUMX
1877   BFD_RELOC_SPARC_JMP_SLOT
1878 ENUMX
1879   BFD_RELOC_SPARC_RELATIVE
1880 ENUMX
1881   BFD_RELOC_SPARC_UA16
1882 ENUMX
1883   BFD_RELOC_SPARC_UA32
1884 ENUMX
1885   BFD_RELOC_SPARC_UA64
1886 ENUMX
1887   BFD_RELOC_SPARC_GOTDATA_HIX22
1888 ENUMX
1889   BFD_RELOC_SPARC_GOTDATA_LOX10
1890 ENUMX
1891   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1892 ENUMX
1893   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1894 ENUMX
1895   BFD_RELOC_SPARC_GOTDATA_OP
1896 ENUMX
1897   BFD_RELOC_SPARC_JMP_IREL
1898 ENUMX
1899   BFD_RELOC_SPARC_IRELATIVE
1900 ENUMDOC
1901   SPARC ELF relocations.  There is probably some overlap with other
1902   relocation types already defined.
1903
1904 ENUM
1905   BFD_RELOC_SPARC_BASE13
1906 ENUMX
1907   BFD_RELOC_SPARC_BASE22
1908 ENUMDOC
1909   I think these are specific to SPARC a.out (e.g., Sun 4).
1910
1911 ENUMEQ
1912   BFD_RELOC_SPARC_64
1913   BFD_RELOC_64
1914 ENUMX
1915   BFD_RELOC_SPARC_10
1916 ENUMX
1917   BFD_RELOC_SPARC_11
1918 ENUMX
1919   BFD_RELOC_SPARC_OLO10
1920 ENUMX
1921   BFD_RELOC_SPARC_HH22
1922 ENUMX
1923   BFD_RELOC_SPARC_HM10
1924 ENUMX
1925   BFD_RELOC_SPARC_LM22
1926 ENUMX
1927   BFD_RELOC_SPARC_PC_HH22
1928 ENUMX
1929   BFD_RELOC_SPARC_PC_HM10
1930 ENUMX
1931   BFD_RELOC_SPARC_PC_LM22
1932 ENUMX
1933   BFD_RELOC_SPARC_WDISP16
1934 ENUMX
1935   BFD_RELOC_SPARC_WDISP19
1936 ENUMX
1937   BFD_RELOC_SPARC_7
1938 ENUMX
1939   BFD_RELOC_SPARC_6
1940 ENUMX
1941   BFD_RELOC_SPARC_5
1942 ENUMEQX
1943   BFD_RELOC_SPARC_DISP64
1944   BFD_RELOC_64_PCREL
1945 ENUMX
1946   BFD_RELOC_SPARC_PLT32
1947 ENUMX
1948   BFD_RELOC_SPARC_PLT64
1949 ENUMX
1950   BFD_RELOC_SPARC_HIX22
1951 ENUMX
1952   BFD_RELOC_SPARC_LOX10
1953 ENUMX
1954   BFD_RELOC_SPARC_H44
1955 ENUMX
1956   BFD_RELOC_SPARC_M44
1957 ENUMX
1958   BFD_RELOC_SPARC_L44
1959 ENUMX
1960   BFD_RELOC_SPARC_REGISTER
1961 ENUMX
1962   BFD_RELOC_SPARC_H34
1963 ENUMX
1964   BFD_RELOC_SPARC_SIZE32
1965 ENUMX
1966   BFD_RELOC_SPARC_SIZE64
1967 ENUMX
1968   BFD_RELOC_SPARC_WDISP10
1969 ENUMDOC
1970   SPARC64 relocations
1971
1972 ENUM
1973   BFD_RELOC_SPARC_REV32
1974 ENUMDOC
1975   SPARC little endian relocation
1976 ENUM
1977   BFD_RELOC_SPARC_TLS_GD_HI22
1978 ENUMX
1979   BFD_RELOC_SPARC_TLS_GD_LO10
1980 ENUMX
1981   BFD_RELOC_SPARC_TLS_GD_ADD
1982 ENUMX
1983   BFD_RELOC_SPARC_TLS_GD_CALL
1984 ENUMX
1985   BFD_RELOC_SPARC_TLS_LDM_HI22
1986 ENUMX
1987   BFD_RELOC_SPARC_TLS_LDM_LO10
1988 ENUMX
1989   BFD_RELOC_SPARC_TLS_LDM_ADD
1990 ENUMX
1991   BFD_RELOC_SPARC_TLS_LDM_CALL
1992 ENUMX
1993   BFD_RELOC_SPARC_TLS_LDO_HIX22
1994 ENUMX
1995   BFD_RELOC_SPARC_TLS_LDO_LOX10
1996 ENUMX
1997   BFD_RELOC_SPARC_TLS_LDO_ADD
1998 ENUMX
1999   BFD_RELOC_SPARC_TLS_IE_HI22
2000 ENUMX
2001   BFD_RELOC_SPARC_TLS_IE_LO10
2002 ENUMX
2003   BFD_RELOC_SPARC_TLS_IE_LD
2004 ENUMX
2005   BFD_RELOC_SPARC_TLS_IE_LDX
2006 ENUMX
2007   BFD_RELOC_SPARC_TLS_IE_ADD
2008 ENUMX
2009   BFD_RELOC_SPARC_TLS_LE_HIX22
2010 ENUMX
2011   BFD_RELOC_SPARC_TLS_LE_LOX10
2012 ENUMX
2013   BFD_RELOC_SPARC_TLS_DTPMOD32
2014 ENUMX
2015   BFD_RELOC_SPARC_TLS_DTPMOD64
2016 ENUMX
2017   BFD_RELOC_SPARC_TLS_DTPOFF32
2018 ENUMX
2019   BFD_RELOC_SPARC_TLS_DTPOFF64
2020 ENUMX
2021   BFD_RELOC_SPARC_TLS_TPOFF32
2022 ENUMX
2023   BFD_RELOC_SPARC_TLS_TPOFF64
2024 ENUMDOC
2025   SPARC TLS relocations
2026
2027 ENUM
2028   BFD_RELOC_SPU_IMM7
2029 ENUMX
2030   BFD_RELOC_SPU_IMM8
2031 ENUMX
2032   BFD_RELOC_SPU_IMM10
2033 ENUMX
2034   BFD_RELOC_SPU_IMM10W
2035 ENUMX
2036   BFD_RELOC_SPU_IMM16
2037 ENUMX
2038   BFD_RELOC_SPU_IMM16W
2039 ENUMX
2040   BFD_RELOC_SPU_IMM18
2041 ENUMX
2042   BFD_RELOC_SPU_PCREL9a
2043 ENUMX
2044   BFD_RELOC_SPU_PCREL9b
2045 ENUMX
2046   BFD_RELOC_SPU_PCREL16
2047 ENUMX
2048   BFD_RELOC_SPU_LO16
2049 ENUMX
2050   BFD_RELOC_SPU_HI16
2051 ENUMX
2052   BFD_RELOC_SPU_PPU32
2053 ENUMX
2054   BFD_RELOC_SPU_PPU64
2055 ENUMX
2056   BFD_RELOC_SPU_ADD_PIC
2057 ENUMDOC
2058   SPU Relocations.
2059
2060 ENUM
2061   BFD_RELOC_ALPHA_GPDISP_HI16
2062 ENUMDOC
2063   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2064      "addend" in some special way.
2065   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2066      writing; when reading, it will be the absolute section symbol.  The
2067      addend is the displacement in bytes of the "lda" instruction from
2068      the "ldah" instruction (which is at the address of this reloc).
2069 ENUM
2070   BFD_RELOC_ALPHA_GPDISP_LO16
2071 ENUMDOC
2072   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2073      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2074      relocations out, and is filled in with the file's GP value on
2075      reading, for convenience.
2076
2077 ENUM
2078   BFD_RELOC_ALPHA_GPDISP
2079 ENUMDOC
2080   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2081      relocation except that there is no accompanying GPDISP_LO16
2082      relocation.
2083
2084 ENUM
2085   BFD_RELOC_ALPHA_LITERAL
2086 ENUMX
2087   BFD_RELOC_ALPHA_ELF_LITERAL
2088 ENUMX
2089   BFD_RELOC_ALPHA_LITUSE
2090 ENUMDOC
2091   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2092      the assembler turns it into a LDQ instruction to load the address of
2093      the symbol, and then fills in a register in the real instruction.
2094
2095      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2096      section symbol.  The addend is ignored when writing, but is filled
2097      in with the file's GP value on reading, for convenience, as with the
2098      GPDISP_LO16 reloc.
2099
2100      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2101      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2102      but it generates output not based on the position within the .got
2103      section, but relative to the GP value chosen for the file during the
2104      final link stage.
2105
2106      The LITUSE reloc, on the instruction using the loaded address, gives
2107      information to the linker that it might be able to use to optimize
2108      away some literal section references.  The symbol is ignored (read
2109      as the absolute section symbol), and the "addend" indicates the type
2110      of instruction using the register:
2111               1 - "memory" fmt insn
2112               2 - byte-manipulation (byte offset reg)
2113               3 - jsr (target of branch)
2114
2115 ENUM
2116   BFD_RELOC_ALPHA_HINT
2117 ENUMDOC
2118   The HINT relocation indicates a value that should be filled into the
2119      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2120      prediction logic which may be provided on some processors.
2121
2122 ENUM
2123   BFD_RELOC_ALPHA_LINKAGE
2124 ENUMDOC
2125   The LINKAGE relocation outputs a linkage pair in the object file,
2126      which is filled by the linker.
2127
2128 ENUM
2129   BFD_RELOC_ALPHA_CODEADDR
2130 ENUMDOC
2131   The CODEADDR relocation outputs a STO_CA in the object file,
2132      which is filled by the linker.
2133
2134 ENUM
2135   BFD_RELOC_ALPHA_GPREL_HI16
2136 ENUMX
2137   BFD_RELOC_ALPHA_GPREL_LO16
2138 ENUMDOC
2139   The GPREL_HI/LO relocations together form a 32-bit offset from the
2140      GP register.
2141
2142 ENUM
2143   BFD_RELOC_ALPHA_BRSGP
2144 ENUMDOC
2145   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2146   share a common GP, and the target address is adjusted for
2147   STO_ALPHA_STD_GPLOAD.
2148
2149 ENUM
2150   BFD_RELOC_ALPHA_NOP
2151 ENUMDOC
2152   The NOP relocation outputs a NOP if the longword displacement
2153      between two procedure entry points is < 2^21.
2154
2155 ENUM
2156   BFD_RELOC_ALPHA_BSR
2157 ENUMDOC
2158   The BSR relocation outputs a BSR if the longword displacement
2159      between two procedure entry points is < 2^21.
2160
2161 ENUM
2162   BFD_RELOC_ALPHA_LDA
2163 ENUMDOC
2164   The LDA relocation outputs a LDA if the longword displacement
2165      between two procedure entry points is < 2^16.
2166
2167 ENUM
2168   BFD_RELOC_ALPHA_BOH
2169 ENUMDOC
2170   The BOH relocation outputs a BSR if the longword displacement
2171      between two procedure entry points is < 2^21, or else a hint.
2172
2173 ENUM
2174   BFD_RELOC_ALPHA_TLSGD
2175 ENUMX
2176   BFD_RELOC_ALPHA_TLSLDM
2177 ENUMX
2178   BFD_RELOC_ALPHA_DTPMOD64
2179 ENUMX
2180   BFD_RELOC_ALPHA_GOTDTPREL16
2181 ENUMX
2182   BFD_RELOC_ALPHA_DTPREL64
2183 ENUMX
2184   BFD_RELOC_ALPHA_DTPREL_HI16
2185 ENUMX
2186   BFD_RELOC_ALPHA_DTPREL_LO16
2187 ENUMX
2188   BFD_RELOC_ALPHA_DTPREL16
2189 ENUMX
2190   BFD_RELOC_ALPHA_GOTTPREL16
2191 ENUMX
2192   BFD_RELOC_ALPHA_TPREL64
2193 ENUMX
2194   BFD_RELOC_ALPHA_TPREL_HI16
2195 ENUMX
2196   BFD_RELOC_ALPHA_TPREL_LO16
2197 ENUMX
2198   BFD_RELOC_ALPHA_TPREL16
2199 ENUMDOC
2200   Alpha thread-local storage relocations.
2201
2202 ENUM
2203   BFD_RELOC_MIPS_JMP
2204 ENUMX
2205   BFD_RELOC_MICROMIPS_JMP
2206 ENUMDOC
2207   The MIPS jump instruction.
2208
2209 ENUM
2210   BFD_RELOC_MIPS16_JMP
2211 ENUMDOC
2212   The MIPS16 jump instruction.
2213
2214 ENUM
2215   BFD_RELOC_MIPS16_GPREL
2216 ENUMDOC
2217   MIPS16 GP relative reloc.
2218
2219 ENUM
2220   BFD_RELOC_HI16
2221 ENUMDOC
2222   High 16 bits of 32-bit value; simple reloc.
2223
2224 ENUM
2225   BFD_RELOC_HI16_S
2226 ENUMDOC
2227   High 16 bits of 32-bit value but the low 16 bits will be sign
2228      extended and added to form the final result.  If the low 16
2229      bits form a negative number, we need to add one to the high value
2230      to compensate for the borrow when the low bits are added.
2231
2232 ENUM
2233   BFD_RELOC_LO16
2234 ENUMDOC
2235   Low 16 bits.
2236
2237 ENUM
2238   BFD_RELOC_HI16_PCREL
2239 ENUMDOC
2240   High 16 bits of 32-bit pc-relative value
2241 ENUM
2242   BFD_RELOC_HI16_S_PCREL
2243 ENUMDOC
2244   High 16 bits of 32-bit pc-relative value, adjusted
2245 ENUM
2246   BFD_RELOC_LO16_PCREL
2247 ENUMDOC
2248   Low 16 bits of pc-relative value
2249
2250 ENUM
2251   BFD_RELOC_MIPS16_GOT16
2252 ENUMX
2253   BFD_RELOC_MIPS16_CALL16
2254 ENUMDOC
2255   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2256      16-bit immediate fields
2257 ENUM
2258   BFD_RELOC_MIPS16_HI16
2259 ENUMDOC
2260   MIPS16 high 16 bits of 32-bit value.
2261 ENUM
2262   BFD_RELOC_MIPS16_HI16_S
2263 ENUMDOC
2264   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2265      extended and added to form the final result.  If the low 16
2266      bits form a negative number, we need to add one to the high value
2267      to compensate for the borrow when the low bits are added.
2268 ENUM
2269   BFD_RELOC_MIPS16_LO16
2270 ENUMDOC
2271   MIPS16 low 16 bits.
2272
2273 ENUM
2274   BFD_RELOC_MIPS16_TLS_GD
2275 ENUMX
2276   BFD_RELOC_MIPS16_TLS_LDM
2277 ENUMX
2278   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2279 ENUMX
2280   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2281 ENUMX
2282   BFD_RELOC_MIPS16_TLS_GOTTPREL
2283 ENUMX
2284   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2285 ENUMX
2286   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2287 ENUMDOC
2288   MIPS16 TLS relocations
2289
2290 ENUM
2291   BFD_RELOC_MIPS_LITERAL
2292 ENUMX
2293   BFD_RELOC_MICROMIPS_LITERAL
2294 ENUMDOC
2295   Relocation against a MIPS literal section.
2296
2297 ENUM
2298   BFD_RELOC_MICROMIPS_7_PCREL_S1
2299 ENUMX
2300   BFD_RELOC_MICROMIPS_10_PCREL_S1
2301 ENUMX
2302   BFD_RELOC_MICROMIPS_16_PCREL_S1
2303 ENUMDOC
2304   microMIPS PC-relative relocations.
2305
2306 ENUM
2307   BFD_RELOC_MIPS_21_PCREL_S2
2308 ENUMX
2309   BFD_RELOC_MIPS_26_PCREL_S2
2310 ENUMX
2311   BFD_RELOC_MIPS_18_PCREL_S3
2312 ENUMX
2313   BFD_RELOC_MIPS_19_PCREL_S2
2314 ENUMDOC
2315   MIPS PC-relative relocations.
2316
2317 ENUM
2318   BFD_RELOC_MICROMIPS_GPREL16
2319 ENUMX
2320   BFD_RELOC_MICROMIPS_HI16
2321 ENUMX
2322   BFD_RELOC_MICROMIPS_HI16_S
2323 ENUMX
2324   BFD_RELOC_MICROMIPS_LO16
2325 ENUMDOC
2326   microMIPS versions of generic BFD relocs.
2327
2328 ENUM
2329   BFD_RELOC_MIPS_GOT16
2330 ENUMX
2331   BFD_RELOC_MICROMIPS_GOT16
2332 ENUMX
2333   BFD_RELOC_MIPS_CALL16
2334 ENUMX
2335   BFD_RELOC_MICROMIPS_CALL16
2336 ENUMX
2337   BFD_RELOC_MIPS_GOT_HI16
2338 ENUMX
2339   BFD_RELOC_MICROMIPS_GOT_HI16
2340 ENUMX
2341   BFD_RELOC_MIPS_GOT_LO16
2342 ENUMX
2343   BFD_RELOC_MICROMIPS_GOT_LO16
2344 ENUMX
2345   BFD_RELOC_MIPS_CALL_HI16
2346 ENUMX
2347   BFD_RELOC_MICROMIPS_CALL_HI16
2348 ENUMX
2349   BFD_RELOC_MIPS_CALL_LO16
2350 ENUMX
2351   BFD_RELOC_MICROMIPS_CALL_LO16
2352 ENUMX
2353   BFD_RELOC_MIPS_SUB
2354 ENUMX
2355   BFD_RELOC_MICROMIPS_SUB
2356 ENUMX
2357   BFD_RELOC_MIPS_GOT_PAGE
2358 ENUMX
2359   BFD_RELOC_MICROMIPS_GOT_PAGE
2360 ENUMX
2361   BFD_RELOC_MIPS_GOT_OFST
2362 ENUMX
2363   BFD_RELOC_MICROMIPS_GOT_OFST
2364 ENUMX
2365   BFD_RELOC_MIPS_GOT_DISP
2366 ENUMX
2367   BFD_RELOC_MICROMIPS_GOT_DISP
2368 ENUMX
2369   BFD_RELOC_MIPS_SHIFT5
2370 ENUMX
2371   BFD_RELOC_MIPS_SHIFT6
2372 ENUMX
2373   BFD_RELOC_MIPS_INSERT_A
2374 ENUMX
2375   BFD_RELOC_MIPS_INSERT_B
2376 ENUMX
2377   BFD_RELOC_MIPS_DELETE
2378 ENUMX
2379   BFD_RELOC_MIPS_HIGHEST
2380 ENUMX
2381   BFD_RELOC_MICROMIPS_HIGHEST
2382 ENUMX
2383   BFD_RELOC_MIPS_HIGHER
2384 ENUMX
2385   BFD_RELOC_MICROMIPS_HIGHER
2386 ENUMX
2387   BFD_RELOC_MIPS_SCN_DISP
2388 ENUMX
2389   BFD_RELOC_MICROMIPS_SCN_DISP
2390 ENUMX
2391   BFD_RELOC_MIPS_REL16
2392 ENUMX
2393   BFD_RELOC_MIPS_RELGOT
2394 ENUMX
2395   BFD_RELOC_MIPS_JALR
2396 ENUMX
2397   BFD_RELOC_MICROMIPS_JALR
2398 ENUMX
2399   BFD_RELOC_MIPS_TLS_DTPMOD32
2400 ENUMX
2401   BFD_RELOC_MIPS_TLS_DTPREL32
2402 ENUMX
2403   BFD_RELOC_MIPS_TLS_DTPMOD64
2404 ENUMX
2405   BFD_RELOC_MIPS_TLS_DTPREL64
2406 ENUMX
2407   BFD_RELOC_MIPS_TLS_GD
2408 ENUMX
2409   BFD_RELOC_MICROMIPS_TLS_GD
2410 ENUMX
2411   BFD_RELOC_MIPS_TLS_LDM
2412 ENUMX
2413   BFD_RELOC_MICROMIPS_TLS_LDM
2414 ENUMX
2415   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2416 ENUMX
2417   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2418 ENUMX
2419   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2420 ENUMX
2421   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2422 ENUMX
2423   BFD_RELOC_MIPS_TLS_GOTTPREL
2424 ENUMX
2425   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2426 ENUMX
2427   BFD_RELOC_MIPS_TLS_TPREL32
2428 ENUMX
2429   BFD_RELOC_MIPS_TLS_TPREL64
2430 ENUMX
2431   BFD_RELOC_MIPS_TLS_TPREL_HI16
2432 ENUMX
2433   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2434 ENUMX
2435   BFD_RELOC_MIPS_TLS_TPREL_LO16
2436 ENUMX
2437   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2438 ENUMX
2439   BFD_RELOC_MIPS_EH
2440 ENUMDOC
2441   MIPS ELF relocations.
2442 COMMENT
2443
2444 ENUM
2445   BFD_RELOC_MIPS_COPY
2446 ENUMX
2447   BFD_RELOC_MIPS_JUMP_SLOT
2448 ENUMDOC
2449   MIPS ELF relocations (VxWorks and PLT extensions).
2450 COMMENT
2451
2452 ENUM
2453   BFD_RELOC_MOXIE_10_PCREL
2454 ENUMDOC
2455   Moxie ELF relocations.
2456 COMMENT
2457
2458 ENUM
2459   BFD_RELOC_FT32_10
2460 ENUMX
2461   BFD_RELOC_FT32_20
2462 ENUMX
2463   BFD_RELOC_FT32_17
2464 ENUMX
2465   BFD_RELOC_FT32_18
2466 ENUMDOC
2467   FT32 ELF relocations.
2468 COMMENT
2469
2470 ENUM
2471   BFD_RELOC_FRV_LABEL16
2472 ENUMX
2473   BFD_RELOC_FRV_LABEL24
2474 ENUMX
2475   BFD_RELOC_FRV_LO16
2476 ENUMX
2477   BFD_RELOC_FRV_HI16
2478 ENUMX
2479   BFD_RELOC_FRV_GPREL12
2480 ENUMX
2481   BFD_RELOC_FRV_GPRELU12
2482 ENUMX
2483   BFD_RELOC_FRV_GPREL32
2484 ENUMX
2485   BFD_RELOC_FRV_GPRELHI
2486 ENUMX
2487   BFD_RELOC_FRV_GPRELLO
2488 ENUMX
2489   BFD_RELOC_FRV_GOT12
2490 ENUMX
2491   BFD_RELOC_FRV_GOTHI
2492 ENUMX
2493   BFD_RELOC_FRV_GOTLO
2494 ENUMX
2495   BFD_RELOC_FRV_FUNCDESC
2496 ENUMX
2497   BFD_RELOC_FRV_FUNCDESC_GOT12
2498 ENUMX
2499   BFD_RELOC_FRV_FUNCDESC_GOTHI
2500 ENUMX
2501   BFD_RELOC_FRV_FUNCDESC_GOTLO
2502 ENUMX
2503   BFD_RELOC_FRV_FUNCDESC_VALUE
2504 ENUMX
2505   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2506 ENUMX
2507   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2508 ENUMX
2509   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2510 ENUMX
2511   BFD_RELOC_FRV_GOTOFF12
2512 ENUMX
2513   BFD_RELOC_FRV_GOTOFFHI
2514 ENUMX
2515   BFD_RELOC_FRV_GOTOFFLO
2516 ENUMX
2517   BFD_RELOC_FRV_GETTLSOFF
2518 ENUMX
2519   BFD_RELOC_FRV_TLSDESC_VALUE
2520 ENUMX
2521   BFD_RELOC_FRV_GOTTLSDESC12
2522 ENUMX
2523   BFD_RELOC_FRV_GOTTLSDESCHI
2524 ENUMX
2525   BFD_RELOC_FRV_GOTTLSDESCLO
2526 ENUMX
2527   BFD_RELOC_FRV_TLSMOFF12
2528 ENUMX
2529   BFD_RELOC_FRV_TLSMOFFHI
2530 ENUMX
2531   BFD_RELOC_FRV_TLSMOFFLO
2532 ENUMX
2533   BFD_RELOC_FRV_GOTTLSOFF12
2534 ENUMX
2535   BFD_RELOC_FRV_GOTTLSOFFHI
2536 ENUMX
2537   BFD_RELOC_FRV_GOTTLSOFFLO
2538 ENUMX
2539   BFD_RELOC_FRV_TLSOFF
2540 ENUMX
2541   BFD_RELOC_FRV_TLSDESC_RELAX
2542 ENUMX
2543   BFD_RELOC_FRV_GETTLSOFF_RELAX
2544 ENUMX
2545   BFD_RELOC_FRV_TLSOFF_RELAX
2546 ENUMX
2547   BFD_RELOC_FRV_TLSMOFF
2548 ENUMDOC
2549   Fujitsu Frv Relocations.
2550 COMMENT
2551
2552 ENUM
2553   BFD_RELOC_MN10300_GOTOFF24
2554 ENUMDOC
2555   This is a 24bit GOT-relative reloc for the mn10300.
2556 ENUM
2557   BFD_RELOC_MN10300_GOT32
2558 ENUMDOC
2559   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2560   in the instruction.
2561 ENUM
2562   BFD_RELOC_MN10300_GOT24
2563 ENUMDOC
2564   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2565   in the instruction.
2566 ENUM
2567   BFD_RELOC_MN10300_GOT16
2568 ENUMDOC
2569   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2570   in the instruction.
2571 ENUM
2572   BFD_RELOC_MN10300_COPY
2573 ENUMDOC
2574   Copy symbol at runtime.
2575 ENUM
2576   BFD_RELOC_MN10300_GLOB_DAT
2577 ENUMDOC
2578   Create GOT entry.
2579 ENUM
2580   BFD_RELOC_MN10300_JMP_SLOT
2581 ENUMDOC
2582   Create PLT entry.
2583 ENUM
2584   BFD_RELOC_MN10300_RELATIVE
2585 ENUMDOC
2586   Adjust by program base.
2587 ENUM
2588   BFD_RELOC_MN10300_SYM_DIFF
2589 ENUMDOC
2590   Together with another reloc targeted at the same location,
2591   allows for a value that is the difference of two symbols
2592   in the same section.
2593 ENUM
2594   BFD_RELOC_MN10300_ALIGN
2595 ENUMDOC
2596   The addend of this reloc is an alignment power that must
2597   be honoured at the offset's location, regardless of linker
2598   relaxation.
2599 ENUM
2600   BFD_RELOC_MN10300_TLS_GD
2601 ENUMX
2602   BFD_RELOC_MN10300_TLS_LD
2603 ENUMX
2604   BFD_RELOC_MN10300_TLS_LDO
2605 ENUMX
2606   BFD_RELOC_MN10300_TLS_GOTIE
2607 ENUMX
2608   BFD_RELOC_MN10300_TLS_IE
2609 ENUMX
2610   BFD_RELOC_MN10300_TLS_LE
2611 ENUMX
2612   BFD_RELOC_MN10300_TLS_DTPMOD
2613 ENUMX
2614   BFD_RELOC_MN10300_TLS_DTPOFF
2615 ENUMX
2616   BFD_RELOC_MN10300_TLS_TPOFF
2617 ENUMDOC
2618   Various TLS-related relocations.
2619 ENUM
2620   BFD_RELOC_MN10300_32_PCREL
2621 ENUMDOC
2622   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2623   instruction.
2624 ENUM
2625   BFD_RELOC_MN10300_16_PCREL
2626 ENUMDOC
2627   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2628   instruction.
2629 COMMENT
2630
2631 ENUM
2632   BFD_RELOC_386_GOT32
2633 ENUMX
2634   BFD_RELOC_386_PLT32
2635 ENUMX
2636   BFD_RELOC_386_COPY
2637 ENUMX
2638   BFD_RELOC_386_GLOB_DAT
2639 ENUMX
2640   BFD_RELOC_386_JUMP_SLOT
2641 ENUMX
2642   BFD_RELOC_386_RELATIVE
2643 ENUMX
2644   BFD_RELOC_386_GOTOFF
2645 ENUMX
2646   BFD_RELOC_386_GOTPC
2647 ENUMX
2648   BFD_RELOC_386_TLS_TPOFF
2649 ENUMX
2650   BFD_RELOC_386_TLS_IE
2651 ENUMX
2652   BFD_RELOC_386_TLS_GOTIE
2653 ENUMX
2654   BFD_RELOC_386_TLS_LE
2655 ENUMX
2656   BFD_RELOC_386_TLS_GD
2657 ENUMX
2658   BFD_RELOC_386_TLS_LDM
2659 ENUMX
2660   BFD_RELOC_386_TLS_LDO_32
2661 ENUMX
2662   BFD_RELOC_386_TLS_IE_32
2663 ENUMX
2664   BFD_RELOC_386_TLS_LE_32
2665 ENUMX
2666   BFD_RELOC_386_TLS_DTPMOD32
2667 ENUMX
2668   BFD_RELOC_386_TLS_DTPOFF32
2669 ENUMX
2670   BFD_RELOC_386_TLS_TPOFF32
2671 ENUMX
2672   BFD_RELOC_386_TLS_GOTDESC
2673 ENUMX
2674   BFD_RELOC_386_TLS_DESC_CALL
2675 ENUMX
2676   BFD_RELOC_386_TLS_DESC
2677 ENUMX
2678   BFD_RELOC_386_IRELATIVE
2679 ENUMDOC
2680   i386/elf relocations
2681
2682 ENUM
2683   BFD_RELOC_X86_64_GOT32
2684 ENUMX
2685   BFD_RELOC_X86_64_PLT32
2686 ENUMX
2687   BFD_RELOC_X86_64_COPY
2688 ENUMX
2689   BFD_RELOC_X86_64_GLOB_DAT
2690 ENUMX
2691   BFD_RELOC_X86_64_JUMP_SLOT
2692 ENUMX
2693   BFD_RELOC_X86_64_RELATIVE
2694 ENUMX
2695   BFD_RELOC_X86_64_GOTPCREL
2696 ENUMX
2697   BFD_RELOC_X86_64_32S
2698 ENUMX
2699   BFD_RELOC_X86_64_DTPMOD64
2700 ENUMX
2701   BFD_RELOC_X86_64_DTPOFF64
2702 ENUMX
2703   BFD_RELOC_X86_64_TPOFF64
2704 ENUMX
2705   BFD_RELOC_X86_64_TLSGD
2706 ENUMX
2707   BFD_RELOC_X86_64_TLSLD
2708 ENUMX
2709   BFD_RELOC_X86_64_DTPOFF32
2710 ENUMX
2711   BFD_RELOC_X86_64_GOTTPOFF
2712 ENUMX
2713   BFD_RELOC_X86_64_TPOFF32
2714 ENUMX
2715   BFD_RELOC_X86_64_GOTOFF64
2716 ENUMX
2717   BFD_RELOC_X86_64_GOTPC32
2718 ENUMX
2719   BFD_RELOC_X86_64_GOT64
2720 ENUMX
2721   BFD_RELOC_X86_64_GOTPCREL64
2722 ENUMX
2723   BFD_RELOC_X86_64_GOTPC64
2724 ENUMX
2725   BFD_RELOC_X86_64_GOTPLT64
2726 ENUMX
2727   BFD_RELOC_X86_64_PLTOFF64
2728 ENUMX
2729   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2730 ENUMX
2731   BFD_RELOC_X86_64_TLSDESC_CALL
2732 ENUMX
2733   BFD_RELOC_X86_64_TLSDESC
2734 ENUMX
2735   BFD_RELOC_X86_64_IRELATIVE
2736 ENUMX
2737   BFD_RELOC_X86_64_PC32_BND
2738 ENUMX
2739   BFD_RELOC_X86_64_PLT32_BND
2740 ENUMDOC
2741   x86-64/elf relocations
2742
2743 ENUM
2744   BFD_RELOC_NS32K_IMM_8
2745 ENUMX
2746   BFD_RELOC_NS32K_IMM_16
2747 ENUMX
2748   BFD_RELOC_NS32K_IMM_32
2749 ENUMX
2750   BFD_RELOC_NS32K_IMM_8_PCREL
2751 ENUMX
2752   BFD_RELOC_NS32K_IMM_16_PCREL
2753 ENUMX
2754   BFD_RELOC_NS32K_IMM_32_PCREL
2755 ENUMX
2756   BFD_RELOC_NS32K_DISP_8
2757 ENUMX
2758   BFD_RELOC_NS32K_DISP_16
2759 ENUMX
2760   BFD_RELOC_NS32K_DISP_32
2761 ENUMX
2762   BFD_RELOC_NS32K_DISP_8_PCREL
2763 ENUMX
2764   BFD_RELOC_NS32K_DISP_16_PCREL
2765 ENUMX
2766   BFD_RELOC_NS32K_DISP_32_PCREL
2767 ENUMDOC
2768   ns32k relocations
2769
2770 ENUM
2771   BFD_RELOC_PDP11_DISP_8_PCREL
2772 ENUMX
2773   BFD_RELOC_PDP11_DISP_6_PCREL
2774 ENUMDOC
2775   PDP11 relocations
2776
2777 ENUM
2778   BFD_RELOC_PJ_CODE_HI16
2779 ENUMX
2780   BFD_RELOC_PJ_CODE_LO16
2781 ENUMX
2782   BFD_RELOC_PJ_CODE_DIR16
2783 ENUMX
2784   BFD_RELOC_PJ_CODE_DIR32
2785 ENUMX
2786   BFD_RELOC_PJ_CODE_REL16
2787 ENUMX
2788   BFD_RELOC_PJ_CODE_REL32
2789 ENUMDOC
2790   Picojava relocs.  Not all of these appear in object files.
2791
2792 ENUM
2793   BFD_RELOC_PPC_B26
2794 ENUMX
2795   BFD_RELOC_PPC_BA26
2796 ENUMX
2797   BFD_RELOC_PPC_TOC16
2798 ENUMX
2799   BFD_RELOC_PPC_B16
2800 ENUMX
2801   BFD_RELOC_PPC_B16_BRTAKEN
2802 ENUMX
2803   BFD_RELOC_PPC_B16_BRNTAKEN
2804 ENUMX
2805   BFD_RELOC_PPC_BA16
2806 ENUMX
2807   BFD_RELOC_PPC_BA16_BRTAKEN
2808 ENUMX
2809   BFD_RELOC_PPC_BA16_BRNTAKEN
2810 ENUMX
2811   BFD_RELOC_PPC_COPY
2812 ENUMX
2813   BFD_RELOC_PPC_GLOB_DAT
2814 ENUMX
2815   BFD_RELOC_PPC_JMP_SLOT
2816 ENUMX
2817   BFD_RELOC_PPC_RELATIVE
2818 ENUMX
2819   BFD_RELOC_PPC_LOCAL24PC
2820 ENUMX
2821   BFD_RELOC_PPC_EMB_NADDR32
2822 ENUMX
2823   BFD_RELOC_PPC_EMB_NADDR16
2824 ENUMX
2825   BFD_RELOC_PPC_EMB_NADDR16_LO
2826 ENUMX
2827   BFD_RELOC_PPC_EMB_NADDR16_HI
2828 ENUMX
2829   BFD_RELOC_PPC_EMB_NADDR16_HA
2830 ENUMX
2831   BFD_RELOC_PPC_EMB_SDAI16
2832 ENUMX
2833   BFD_RELOC_PPC_EMB_SDA2I16
2834 ENUMX
2835   BFD_RELOC_PPC_EMB_SDA2REL
2836 ENUMX
2837   BFD_RELOC_PPC_EMB_SDA21
2838 ENUMX
2839   BFD_RELOC_PPC_EMB_MRKREF
2840 ENUMX
2841   BFD_RELOC_PPC_EMB_RELSEC16
2842 ENUMX
2843   BFD_RELOC_PPC_EMB_RELST_LO
2844 ENUMX
2845   BFD_RELOC_PPC_EMB_RELST_HI
2846 ENUMX
2847   BFD_RELOC_PPC_EMB_RELST_HA
2848 ENUMX
2849   BFD_RELOC_PPC_EMB_BIT_FLD
2850 ENUMX
2851   BFD_RELOC_PPC_EMB_RELSDA
2852 ENUMX
2853   BFD_RELOC_PPC_VLE_REL8
2854 ENUMX
2855   BFD_RELOC_PPC_VLE_REL15
2856 ENUMX
2857   BFD_RELOC_PPC_VLE_REL24
2858 ENUMX
2859   BFD_RELOC_PPC_VLE_LO16A
2860 ENUMX
2861   BFD_RELOC_PPC_VLE_LO16D
2862 ENUMX
2863   BFD_RELOC_PPC_VLE_HI16A
2864 ENUMX
2865   BFD_RELOC_PPC_VLE_HI16D
2866 ENUMX
2867   BFD_RELOC_PPC_VLE_HA16A
2868 ENUMX
2869   BFD_RELOC_PPC_VLE_HA16D
2870 ENUMX
2871   BFD_RELOC_PPC_VLE_SDA21
2872 ENUMX
2873   BFD_RELOC_PPC_VLE_SDA21_LO
2874 ENUMX
2875   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2876 ENUMX
2877   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2878 ENUMX
2879   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2880 ENUMX
2881   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2882 ENUMX
2883   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2884 ENUMX
2885   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2886 ENUMX
2887   BFD_RELOC_PPC64_HIGHER
2888 ENUMX
2889   BFD_RELOC_PPC64_HIGHER_S
2890 ENUMX
2891   BFD_RELOC_PPC64_HIGHEST
2892 ENUMX
2893   BFD_RELOC_PPC64_HIGHEST_S
2894 ENUMX
2895   BFD_RELOC_PPC64_TOC16_LO
2896 ENUMX
2897   BFD_RELOC_PPC64_TOC16_HI
2898 ENUMX
2899   BFD_RELOC_PPC64_TOC16_HA
2900 ENUMX
2901   BFD_RELOC_PPC64_TOC
2902 ENUMX
2903   BFD_RELOC_PPC64_PLTGOT16
2904 ENUMX
2905   BFD_RELOC_PPC64_PLTGOT16_LO
2906 ENUMX
2907   BFD_RELOC_PPC64_PLTGOT16_HI
2908 ENUMX
2909   BFD_RELOC_PPC64_PLTGOT16_HA
2910 ENUMX
2911   BFD_RELOC_PPC64_ADDR16_DS
2912 ENUMX
2913   BFD_RELOC_PPC64_ADDR16_LO_DS
2914 ENUMX
2915   BFD_RELOC_PPC64_GOT16_DS
2916 ENUMX
2917   BFD_RELOC_PPC64_GOT16_LO_DS
2918 ENUMX
2919   BFD_RELOC_PPC64_PLT16_LO_DS
2920 ENUMX
2921   BFD_RELOC_PPC64_SECTOFF_DS
2922 ENUMX
2923   BFD_RELOC_PPC64_SECTOFF_LO_DS
2924 ENUMX
2925   BFD_RELOC_PPC64_TOC16_DS
2926 ENUMX
2927   BFD_RELOC_PPC64_TOC16_LO_DS
2928 ENUMX
2929   BFD_RELOC_PPC64_PLTGOT16_DS
2930 ENUMX
2931   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2932 ENUMX
2933   BFD_RELOC_PPC64_ADDR16_HIGH
2934 ENUMX
2935   BFD_RELOC_PPC64_ADDR16_HIGHA
2936 ENUMX
2937   BFD_RELOC_PPC64_ADDR64_LOCAL
2938 ENUMDOC
2939   Power(rs6000) and PowerPC relocations.
2940
2941 ENUM
2942   BFD_RELOC_PPC_TLS
2943 ENUMX
2944   BFD_RELOC_PPC_TLSGD
2945 ENUMX
2946   BFD_RELOC_PPC_TLSLD
2947 ENUMX
2948   BFD_RELOC_PPC_DTPMOD
2949 ENUMX
2950   BFD_RELOC_PPC_TPREL16
2951 ENUMX
2952   BFD_RELOC_PPC_TPREL16_LO
2953 ENUMX
2954   BFD_RELOC_PPC_TPREL16_HI
2955 ENUMX
2956   BFD_RELOC_PPC_TPREL16_HA
2957 ENUMX
2958   BFD_RELOC_PPC_TPREL
2959 ENUMX
2960   BFD_RELOC_PPC_DTPREL16
2961 ENUMX
2962   BFD_RELOC_PPC_DTPREL16_LO
2963 ENUMX
2964   BFD_RELOC_PPC_DTPREL16_HI
2965 ENUMX
2966   BFD_RELOC_PPC_DTPREL16_HA
2967 ENUMX
2968   BFD_RELOC_PPC_DTPREL
2969 ENUMX
2970   BFD_RELOC_PPC_GOT_TLSGD16
2971 ENUMX
2972   BFD_RELOC_PPC_GOT_TLSGD16_LO
2973 ENUMX
2974   BFD_RELOC_PPC_GOT_TLSGD16_HI
2975 ENUMX
2976   BFD_RELOC_PPC_GOT_TLSGD16_HA
2977 ENUMX
2978   BFD_RELOC_PPC_GOT_TLSLD16
2979 ENUMX
2980   BFD_RELOC_PPC_GOT_TLSLD16_LO
2981 ENUMX
2982   BFD_RELOC_PPC_GOT_TLSLD16_HI
2983 ENUMX
2984   BFD_RELOC_PPC_GOT_TLSLD16_HA
2985 ENUMX
2986   BFD_RELOC_PPC_GOT_TPREL16
2987 ENUMX
2988   BFD_RELOC_PPC_GOT_TPREL16_LO
2989 ENUMX
2990   BFD_RELOC_PPC_GOT_TPREL16_HI
2991 ENUMX
2992   BFD_RELOC_PPC_GOT_TPREL16_HA
2993 ENUMX
2994   BFD_RELOC_PPC_GOT_DTPREL16
2995 ENUMX
2996   BFD_RELOC_PPC_GOT_DTPREL16_LO
2997 ENUMX
2998   BFD_RELOC_PPC_GOT_DTPREL16_HI
2999 ENUMX
3000   BFD_RELOC_PPC_GOT_DTPREL16_HA
3001 ENUMX
3002   BFD_RELOC_PPC64_TPREL16_DS
3003 ENUMX
3004   BFD_RELOC_PPC64_TPREL16_LO_DS
3005 ENUMX
3006   BFD_RELOC_PPC64_TPREL16_HIGHER
3007 ENUMX
3008   BFD_RELOC_PPC64_TPREL16_HIGHERA
3009 ENUMX
3010   BFD_RELOC_PPC64_TPREL16_HIGHEST
3011 ENUMX
3012   BFD_RELOC_PPC64_TPREL16_HIGHESTA
3013 ENUMX
3014   BFD_RELOC_PPC64_DTPREL16_DS
3015 ENUMX
3016   BFD_RELOC_PPC64_DTPREL16_LO_DS
3017 ENUMX
3018   BFD_RELOC_PPC64_DTPREL16_HIGHER
3019 ENUMX
3020   BFD_RELOC_PPC64_DTPREL16_HIGHERA
3021 ENUMX
3022   BFD_RELOC_PPC64_DTPREL16_HIGHEST
3023 ENUMX
3024   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3025 ENUMX
3026   BFD_RELOC_PPC64_TPREL16_HIGH
3027 ENUMX
3028   BFD_RELOC_PPC64_TPREL16_HIGHA
3029 ENUMX
3030   BFD_RELOC_PPC64_DTPREL16_HIGH
3031 ENUMX
3032   BFD_RELOC_PPC64_DTPREL16_HIGHA
3033 ENUMDOC
3034   PowerPC and PowerPC64 thread-local storage relocations.
3035
3036 ENUM
3037   BFD_RELOC_I370_D12
3038 ENUMDOC
3039   IBM 370/390 relocations
3040
3041 ENUM
3042   BFD_RELOC_CTOR
3043 ENUMDOC
3044   The type of reloc used to build a constructor table - at the moment
3045   probably a 32 bit wide absolute relocation, but the target can choose.
3046   It generally does map to one of the other relocation types.
3047
3048 ENUM
3049   BFD_RELOC_ARM_PCREL_BRANCH
3050 ENUMDOC
3051   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3052   not stored in the instruction.
3053 ENUM
3054   BFD_RELOC_ARM_PCREL_BLX
3055 ENUMDOC
3056   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3057   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3058   field in the instruction.
3059 ENUM
3060   BFD_RELOC_THUMB_PCREL_BLX
3061 ENUMDOC
3062   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3063   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3064   field in the instruction.
3065 ENUM
3066   BFD_RELOC_ARM_PCREL_CALL
3067 ENUMDOC
3068   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3069 ENUM
3070   BFD_RELOC_ARM_PCREL_JUMP
3071 ENUMDOC
3072   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3073
3074 ENUM
3075   BFD_RELOC_THUMB_PCREL_BRANCH7
3076 ENUMX
3077   BFD_RELOC_THUMB_PCREL_BRANCH9
3078 ENUMX
3079   BFD_RELOC_THUMB_PCREL_BRANCH12
3080 ENUMX
3081   BFD_RELOC_THUMB_PCREL_BRANCH20
3082 ENUMX
3083   BFD_RELOC_THUMB_PCREL_BRANCH23
3084 ENUMX
3085   BFD_RELOC_THUMB_PCREL_BRANCH25
3086 ENUMDOC
3087   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3088   The lowest bit must be zero and is not stored in the instruction.
3089   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3090   "nn" one smaller in all cases.  Note further that BRANCH23
3091   corresponds to R_ARM_THM_CALL.
3092
3093 ENUM
3094   BFD_RELOC_ARM_OFFSET_IMM
3095 ENUMDOC
3096   12-bit immediate offset, used in ARM-format ldr and str instructions.
3097
3098 ENUM
3099   BFD_RELOC_ARM_THUMB_OFFSET
3100 ENUMDOC
3101   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3102
3103 ENUM
3104   BFD_RELOC_ARM_TARGET1
3105 ENUMDOC
3106   Pc-relative or absolute relocation depending on target.  Used for
3107   entries in .init_array sections.
3108 ENUM
3109   BFD_RELOC_ARM_ROSEGREL32
3110 ENUMDOC
3111   Read-only segment base relative address.
3112 ENUM
3113   BFD_RELOC_ARM_SBREL32
3114 ENUMDOC
3115   Data segment base relative address.
3116 ENUM
3117   BFD_RELOC_ARM_TARGET2
3118 ENUMDOC
3119   This reloc is used for references to RTTI data from exception handling
3120   tables.  The actual definition depends on the target.  It may be a
3121   pc-relative or some form of GOT-indirect relocation.
3122 ENUM
3123   BFD_RELOC_ARM_PREL31
3124 ENUMDOC
3125   31-bit PC relative address.
3126 ENUM
3127   BFD_RELOC_ARM_MOVW
3128 ENUMX
3129   BFD_RELOC_ARM_MOVT
3130 ENUMX
3131   BFD_RELOC_ARM_MOVW_PCREL
3132 ENUMX
3133   BFD_RELOC_ARM_MOVT_PCREL
3134 ENUMX
3135   BFD_RELOC_ARM_THUMB_MOVW
3136 ENUMX
3137   BFD_RELOC_ARM_THUMB_MOVT
3138 ENUMX
3139   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3140 ENUMX
3141   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3142 ENUMDOC
3143   Low and High halfword relocations for MOVW and MOVT instructions.
3144
3145 ENUM
3146   BFD_RELOC_ARM_JUMP_SLOT
3147 ENUMX
3148   BFD_RELOC_ARM_GLOB_DAT
3149 ENUMX
3150   BFD_RELOC_ARM_GOT32
3151 ENUMX
3152   BFD_RELOC_ARM_PLT32
3153 ENUMX
3154   BFD_RELOC_ARM_RELATIVE
3155 ENUMX
3156   BFD_RELOC_ARM_GOTOFF
3157 ENUMX
3158   BFD_RELOC_ARM_GOTPC
3159 ENUMX
3160   BFD_RELOC_ARM_GOT_PREL
3161 ENUMDOC
3162   Relocations for setting up GOTs and PLTs for shared libraries.
3163
3164 ENUM
3165   BFD_RELOC_ARM_TLS_GD32
3166 ENUMX
3167   BFD_RELOC_ARM_TLS_LDO32
3168 ENUMX
3169   BFD_RELOC_ARM_TLS_LDM32
3170 ENUMX
3171   BFD_RELOC_ARM_TLS_DTPOFF32
3172 ENUMX
3173   BFD_RELOC_ARM_TLS_DTPMOD32
3174 ENUMX
3175   BFD_RELOC_ARM_TLS_TPOFF32
3176 ENUMX
3177   BFD_RELOC_ARM_TLS_IE32
3178 ENUMX
3179   BFD_RELOC_ARM_TLS_LE32
3180 ENUMX
3181   BFD_RELOC_ARM_TLS_GOTDESC
3182 ENUMX
3183   BFD_RELOC_ARM_TLS_CALL
3184 ENUMX
3185   BFD_RELOC_ARM_THM_TLS_CALL
3186 ENUMX
3187   BFD_RELOC_ARM_TLS_DESCSEQ
3188 ENUMX
3189   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3190 ENUMX
3191   BFD_RELOC_ARM_TLS_DESC
3192 ENUMDOC
3193   ARM thread-local storage relocations.
3194
3195 ENUM
3196   BFD_RELOC_ARM_ALU_PC_G0_NC
3197 ENUMX
3198   BFD_RELOC_ARM_ALU_PC_G0
3199 ENUMX
3200   BFD_RELOC_ARM_ALU_PC_G1_NC
3201 ENUMX
3202   BFD_RELOC_ARM_ALU_PC_G1
3203 ENUMX
3204   BFD_RELOC_ARM_ALU_PC_G2
3205 ENUMX
3206   BFD_RELOC_ARM_LDR_PC_G0
3207 ENUMX
3208   BFD_RELOC_ARM_LDR_PC_G1
3209 ENUMX
3210   BFD_RELOC_ARM_LDR_PC_G2
3211 ENUMX
3212   BFD_RELOC_ARM_LDRS_PC_G0
3213 ENUMX
3214   BFD_RELOC_ARM_LDRS_PC_G1
3215 ENUMX
3216   BFD_RELOC_ARM_LDRS_PC_G2
3217 ENUMX
3218   BFD_RELOC_ARM_LDC_PC_G0
3219 ENUMX
3220   BFD_RELOC_ARM_LDC_PC_G1
3221 ENUMX
3222   BFD_RELOC_ARM_LDC_PC_G2
3223 ENUMX
3224   BFD_RELOC_ARM_ALU_SB_G0_NC
3225 ENUMX
3226   BFD_RELOC_ARM_ALU_SB_G0
3227 ENUMX
3228   BFD_RELOC_ARM_ALU_SB_G1_NC
3229 ENUMX
3230   BFD_RELOC_ARM_ALU_SB_G1
3231 ENUMX
3232   BFD_RELOC_ARM_ALU_SB_G2
3233 ENUMX
3234   BFD_RELOC_ARM_LDR_SB_G0
3235 ENUMX
3236   BFD_RELOC_ARM_LDR_SB_G1
3237 ENUMX
3238   BFD_RELOC_ARM_LDR_SB_G2
3239 ENUMX
3240   BFD_RELOC_ARM_LDRS_SB_G0
3241 ENUMX
3242   BFD_RELOC_ARM_LDRS_SB_G1
3243 ENUMX
3244   BFD_RELOC_ARM_LDRS_SB_G2
3245 ENUMX
3246   BFD_RELOC_ARM_LDC_SB_G0
3247 ENUMX
3248   BFD_RELOC_ARM_LDC_SB_G1
3249 ENUMX
3250   BFD_RELOC_ARM_LDC_SB_G2
3251 ENUMDOC
3252   ARM group relocations.
3253
3254 ENUM
3255   BFD_RELOC_ARM_V4BX
3256 ENUMDOC
3257   Annotation of BX instructions.
3258
3259 ENUM
3260   BFD_RELOC_ARM_IRELATIVE
3261 ENUMDOC
3262   ARM support for STT_GNU_IFUNC.
3263
3264 ENUM
3265   BFD_RELOC_ARM_IMMEDIATE
3266 ENUMX
3267   BFD_RELOC_ARM_ADRL_IMMEDIATE
3268 ENUMX
3269   BFD_RELOC_ARM_T32_IMMEDIATE
3270 ENUMX
3271   BFD_RELOC_ARM_T32_ADD_IMM
3272 ENUMX
3273   BFD_RELOC_ARM_T32_IMM12
3274 ENUMX
3275   BFD_RELOC_ARM_T32_ADD_PC12
3276 ENUMX
3277   BFD_RELOC_ARM_SHIFT_IMM
3278 ENUMX
3279   BFD_RELOC_ARM_SMC
3280 ENUMX
3281   BFD_RELOC_ARM_HVC
3282 ENUMX
3283   BFD_RELOC_ARM_SWI
3284 ENUMX
3285   BFD_RELOC_ARM_MULTI
3286 ENUMX
3287   BFD_RELOC_ARM_CP_OFF_IMM
3288 ENUMX
3289   BFD_RELOC_ARM_CP_OFF_IMM_S2
3290 ENUMX
3291   BFD_RELOC_ARM_T32_CP_OFF_IMM
3292 ENUMX
3293   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3294 ENUMX
3295   BFD_RELOC_ARM_ADR_IMM
3296 ENUMX
3297   BFD_RELOC_ARM_LDR_IMM
3298 ENUMX
3299   BFD_RELOC_ARM_LITERAL
3300 ENUMX
3301   BFD_RELOC_ARM_IN_POOL
3302 ENUMX
3303   BFD_RELOC_ARM_OFFSET_IMM8
3304 ENUMX
3305   BFD_RELOC_ARM_T32_OFFSET_U8
3306 ENUMX
3307   BFD_RELOC_ARM_T32_OFFSET_IMM
3308 ENUMX
3309   BFD_RELOC_ARM_HWLITERAL
3310 ENUMX
3311   BFD_RELOC_ARM_THUMB_ADD
3312 ENUMX
3313   BFD_RELOC_ARM_THUMB_IMM
3314 ENUMX
3315   BFD_RELOC_ARM_THUMB_SHIFT
3316 ENUMDOC
3317   These relocs are only used within the ARM assembler.  They are not
3318   (at present) written to any object files.
3319
3320 ENUM
3321   BFD_RELOC_SH_PCDISP8BY2
3322 ENUMX
3323   BFD_RELOC_SH_PCDISP12BY2
3324 ENUMX
3325   BFD_RELOC_SH_IMM3
3326 ENUMX
3327   BFD_RELOC_SH_IMM3U
3328 ENUMX
3329   BFD_RELOC_SH_DISP12
3330 ENUMX
3331   BFD_RELOC_SH_DISP12BY2
3332 ENUMX
3333   BFD_RELOC_SH_DISP12BY4
3334 ENUMX
3335   BFD_RELOC_SH_DISP12BY8
3336 ENUMX
3337   BFD_RELOC_SH_DISP20
3338 ENUMX
3339   BFD_RELOC_SH_DISP20BY8
3340 ENUMX
3341   BFD_RELOC_SH_IMM4
3342 ENUMX
3343   BFD_RELOC_SH_IMM4BY2
3344 ENUMX
3345   BFD_RELOC_SH_IMM4BY4
3346 ENUMX
3347   BFD_RELOC_SH_IMM8
3348 ENUMX
3349   BFD_RELOC_SH_IMM8BY2
3350 ENUMX
3351   BFD_RELOC_SH_IMM8BY4
3352 ENUMX
3353   BFD_RELOC_SH_PCRELIMM8BY2
3354 ENUMX
3355   BFD_RELOC_SH_PCRELIMM8BY4
3356 ENUMX
3357   BFD_RELOC_SH_SWITCH16
3358 ENUMX
3359   BFD_RELOC_SH_SWITCH32
3360 ENUMX
3361   BFD_RELOC_SH_USES
3362 ENUMX
3363   BFD_RELOC_SH_COUNT
3364 ENUMX
3365   BFD_RELOC_SH_ALIGN
3366 ENUMX
3367   BFD_RELOC_SH_CODE
3368 ENUMX
3369   BFD_RELOC_SH_DATA
3370 ENUMX
3371   BFD_RELOC_SH_LABEL
3372 ENUMX
3373   BFD_RELOC_SH_LOOP_START
3374 ENUMX
3375   BFD_RELOC_SH_LOOP_END
3376 ENUMX
3377   BFD_RELOC_SH_COPY
3378 ENUMX
3379   BFD_RELOC_SH_GLOB_DAT
3380 ENUMX
3381   BFD_RELOC_SH_JMP_SLOT
3382 ENUMX
3383   BFD_RELOC_SH_RELATIVE
3384 ENUMX
3385   BFD_RELOC_SH_GOTPC
3386 ENUMX
3387   BFD_RELOC_SH_GOT_LOW16
3388 ENUMX
3389   BFD_RELOC_SH_GOT_MEDLOW16
3390 ENUMX
3391   BFD_RELOC_SH_GOT_MEDHI16
3392 ENUMX
3393   BFD_RELOC_SH_GOT_HI16
3394 ENUMX
3395   BFD_RELOC_SH_GOTPLT_LOW16
3396 ENUMX
3397   BFD_RELOC_SH_GOTPLT_MEDLOW16
3398 ENUMX
3399   BFD_RELOC_SH_GOTPLT_MEDHI16
3400 ENUMX
3401   BFD_RELOC_SH_GOTPLT_HI16
3402 ENUMX
3403   BFD_RELOC_SH_PLT_LOW16
3404 ENUMX
3405   BFD_RELOC_SH_PLT_MEDLOW16
3406 ENUMX
3407   BFD_RELOC_SH_PLT_MEDHI16
3408 ENUMX
3409   BFD_RELOC_SH_PLT_HI16
3410 ENUMX
3411   BFD_RELOC_SH_GOTOFF_LOW16
3412 ENUMX
3413   BFD_RELOC_SH_GOTOFF_MEDLOW16
3414 ENUMX
3415   BFD_RELOC_SH_GOTOFF_MEDHI16
3416 ENUMX
3417   BFD_RELOC_SH_GOTOFF_HI16
3418 ENUMX
3419   BFD_RELOC_SH_GOTPC_LOW16
3420 ENUMX
3421   BFD_RELOC_SH_GOTPC_MEDLOW16
3422 ENUMX
3423   BFD_RELOC_SH_GOTPC_MEDHI16
3424 ENUMX
3425   BFD_RELOC_SH_GOTPC_HI16
3426 ENUMX
3427   BFD_RELOC_SH_COPY64
3428 ENUMX
3429   BFD_RELOC_SH_GLOB_DAT64
3430 ENUMX
3431   BFD_RELOC_SH_JMP_SLOT64
3432 ENUMX
3433   BFD_RELOC_SH_RELATIVE64
3434 ENUMX
3435   BFD_RELOC_SH_GOT10BY4
3436 ENUMX
3437   BFD_RELOC_SH_GOT10BY8
3438 ENUMX
3439   BFD_RELOC_SH_GOTPLT10BY4
3440 ENUMX
3441   BFD_RELOC_SH_GOTPLT10BY8
3442 ENUMX
3443   BFD_RELOC_SH_GOTPLT32
3444 ENUMX
3445   BFD_RELOC_SH_SHMEDIA_CODE
3446 ENUMX
3447   BFD_RELOC_SH_IMMU5
3448 ENUMX
3449   BFD_RELOC_SH_IMMS6
3450 ENUMX
3451   BFD_RELOC_SH_IMMS6BY32
3452 ENUMX
3453   BFD_RELOC_SH_IMMU6
3454 ENUMX
3455   BFD_RELOC_SH_IMMS10
3456 ENUMX
3457   BFD_RELOC_SH_IMMS10BY2
3458 ENUMX
3459   BFD_RELOC_SH_IMMS10BY4
3460 ENUMX
3461   BFD_RELOC_SH_IMMS10BY8
3462 ENUMX
3463   BFD_RELOC_SH_IMMS16
3464 ENUMX
3465   BFD_RELOC_SH_IMMU16
3466 ENUMX
3467   BFD_RELOC_SH_IMM_LOW16
3468 ENUMX
3469   BFD_RELOC_SH_IMM_LOW16_PCREL
3470 ENUMX
3471   BFD_RELOC_SH_IMM_MEDLOW16
3472 ENUMX
3473   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3474 ENUMX
3475   BFD_RELOC_SH_IMM_MEDHI16
3476 ENUMX
3477   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3478 ENUMX
3479   BFD_RELOC_SH_IMM_HI16
3480 ENUMX
3481   BFD_RELOC_SH_IMM_HI16_PCREL
3482 ENUMX
3483   BFD_RELOC_SH_PT_16
3484 ENUMX
3485   BFD_RELOC_SH_TLS_GD_32
3486 ENUMX
3487   BFD_RELOC_SH_TLS_LD_32
3488 ENUMX
3489   BFD_RELOC_SH_TLS_LDO_32
3490 ENUMX
3491   BFD_RELOC_SH_TLS_IE_32
3492 ENUMX
3493   BFD_RELOC_SH_TLS_LE_32
3494 ENUMX
3495   BFD_RELOC_SH_TLS_DTPMOD32
3496 ENUMX
3497   BFD_RELOC_SH_TLS_DTPOFF32
3498 ENUMX
3499   BFD_RELOC_SH_TLS_TPOFF32
3500 ENUMX
3501   BFD_RELOC_SH_GOT20
3502 ENUMX
3503   BFD_RELOC_SH_GOTOFF20
3504 ENUMX
3505   BFD_RELOC_SH_GOTFUNCDESC
3506 ENUMX
3507   BFD_RELOC_SH_GOTFUNCDESC20
3508 ENUMX
3509   BFD_RELOC_SH_GOTOFFFUNCDESC
3510 ENUMX
3511   BFD_RELOC_SH_GOTOFFFUNCDESC20
3512 ENUMX
3513   BFD_RELOC_SH_FUNCDESC
3514 ENUMDOC
3515   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3516
3517 ENUM
3518   BFD_RELOC_ARC_B22_PCREL
3519 ENUMDOC
3520   ARC Cores relocs.
3521   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3522   not stored in the instruction.  The high 20 bits are installed in bits 26
3523   through 7 of the instruction.
3524 ENUM
3525   BFD_RELOC_ARC_B26
3526 ENUMDOC
3527   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3528   stored in the instruction.  The high 24 bits are installed in bits 23
3529   through 0.
3530
3531 ENUM
3532   BFD_RELOC_BFIN_16_IMM
3533 ENUMDOC
3534   ADI Blackfin 16 bit immediate absolute reloc.
3535 ENUM
3536   BFD_RELOC_BFIN_16_HIGH
3537 ENUMDOC
3538   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3539 ENUM
3540   BFD_RELOC_BFIN_4_PCREL
3541 ENUMDOC
3542   ADI Blackfin 'a' part of LSETUP.
3543 ENUM
3544   BFD_RELOC_BFIN_5_PCREL
3545 ENUMDOC
3546   ADI Blackfin.
3547 ENUM
3548   BFD_RELOC_BFIN_16_LOW
3549 ENUMDOC
3550   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3551 ENUM
3552   BFD_RELOC_BFIN_10_PCREL
3553 ENUMDOC
3554   ADI Blackfin.
3555 ENUM
3556   BFD_RELOC_BFIN_11_PCREL
3557 ENUMDOC
3558   ADI Blackfin 'b' part of LSETUP.
3559 ENUM
3560   BFD_RELOC_BFIN_12_PCREL_JUMP
3561 ENUMDOC
3562   ADI Blackfin.
3563 ENUM
3564   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3565 ENUMDOC
3566   ADI Blackfin Short jump, pcrel.
3567 ENUM
3568   BFD_RELOC_BFIN_24_PCREL_CALL_X
3569 ENUMDOC
3570   ADI Blackfin Call.x not implemented.
3571 ENUM
3572   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3573 ENUMDOC
3574   ADI Blackfin Long Jump pcrel.
3575 ENUM
3576   BFD_RELOC_BFIN_GOT17M4
3577 ENUMX
3578   BFD_RELOC_BFIN_GOTHI
3579 ENUMX
3580   BFD_RELOC_BFIN_GOTLO
3581 ENUMX
3582   BFD_RELOC_BFIN_FUNCDESC
3583 ENUMX
3584   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3585 ENUMX
3586   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3587 ENUMX
3588   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3589 ENUMX
3590   BFD_RELOC_BFIN_FUNCDESC_VALUE
3591 ENUMX
3592   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3593 ENUMX
3594   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3595 ENUMX
3596   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3597 ENUMX
3598   BFD_RELOC_BFIN_GOTOFF17M4
3599 ENUMX
3600   BFD_RELOC_BFIN_GOTOFFHI
3601 ENUMX
3602   BFD_RELOC_BFIN_GOTOFFLO
3603 ENUMDOC
3604   ADI Blackfin FD-PIC relocations.
3605 ENUM
3606   BFD_RELOC_BFIN_GOT
3607 ENUMDOC
3608   ADI Blackfin GOT relocation.
3609 ENUM
3610   BFD_RELOC_BFIN_PLTPC
3611 ENUMDOC
3612   ADI Blackfin PLTPC relocation.
3613 ENUM
3614   BFD_ARELOC_BFIN_PUSH
3615 ENUMDOC
3616   ADI Blackfin arithmetic relocation.
3617 ENUM
3618   BFD_ARELOC_BFIN_CONST
3619 ENUMDOC
3620   ADI Blackfin arithmetic relocation.
3621 ENUM
3622   BFD_ARELOC_BFIN_ADD
3623 ENUMDOC
3624   ADI Blackfin arithmetic relocation.
3625 ENUM
3626   BFD_ARELOC_BFIN_SUB
3627 ENUMDOC
3628   ADI Blackfin arithmetic relocation.
3629 ENUM
3630   BFD_ARELOC_BFIN_MULT
3631 ENUMDOC
3632   ADI Blackfin arithmetic relocation.
3633 ENUM
3634   BFD_ARELOC_BFIN_DIV
3635 ENUMDOC
3636   ADI Blackfin arithmetic relocation.
3637 ENUM
3638   BFD_ARELOC_BFIN_MOD
3639 ENUMDOC
3640   ADI Blackfin arithmetic relocation.
3641 ENUM
3642   BFD_ARELOC_BFIN_LSHIFT
3643 ENUMDOC
3644   ADI Blackfin arithmetic relocation.
3645 ENUM
3646   BFD_ARELOC_BFIN_RSHIFT
3647 ENUMDOC
3648   ADI Blackfin arithmetic relocation.
3649 ENUM
3650   BFD_ARELOC_BFIN_AND
3651 ENUMDOC
3652   ADI Blackfin arithmetic relocation.
3653 ENUM
3654   BFD_ARELOC_BFIN_OR
3655 ENUMDOC
3656   ADI Blackfin arithmetic relocation.
3657 ENUM
3658   BFD_ARELOC_BFIN_XOR
3659 ENUMDOC
3660   ADI Blackfin arithmetic relocation.
3661 ENUM
3662   BFD_ARELOC_BFIN_LAND
3663 ENUMDOC
3664   ADI Blackfin arithmetic relocation.
3665 ENUM
3666   BFD_ARELOC_BFIN_LOR
3667 ENUMDOC
3668   ADI Blackfin arithmetic relocation.
3669 ENUM
3670   BFD_ARELOC_BFIN_LEN
3671 ENUMDOC
3672   ADI Blackfin arithmetic relocation.
3673 ENUM
3674   BFD_ARELOC_BFIN_NEG
3675 ENUMDOC
3676   ADI Blackfin arithmetic relocation.
3677 ENUM
3678   BFD_ARELOC_BFIN_COMP
3679 ENUMDOC
3680   ADI Blackfin arithmetic relocation.
3681 ENUM
3682   BFD_ARELOC_BFIN_PAGE
3683 ENUMDOC
3684   ADI Blackfin arithmetic relocation.
3685 ENUM
3686   BFD_ARELOC_BFIN_HWPAGE
3687 ENUMDOC
3688   ADI Blackfin arithmetic relocation.
3689 ENUM
3690   BFD_ARELOC_BFIN_ADDR
3691 ENUMDOC
3692   ADI Blackfin arithmetic relocation.
3693
3694 ENUM
3695   BFD_RELOC_D10V_10_PCREL_R
3696 ENUMDOC
3697   Mitsubishi D10V relocs.
3698   This is a 10-bit reloc with the right 2 bits
3699   assumed to be 0.
3700 ENUM
3701   BFD_RELOC_D10V_10_PCREL_L
3702 ENUMDOC
3703   Mitsubishi D10V relocs.
3704   This is a 10-bit reloc with the right 2 bits
3705   assumed to be 0.  This is the same as the previous reloc
3706   except it is in the left container, i.e.,
3707   shifted left 15 bits.
3708 ENUM
3709   BFD_RELOC_D10V_18
3710 ENUMDOC
3711   This is an 18-bit reloc with the right 2 bits
3712   assumed to be 0.
3713 ENUM
3714   BFD_RELOC_D10V_18_PCREL
3715 ENUMDOC
3716   This is an 18-bit reloc with the right 2 bits
3717   assumed to be 0.
3718
3719 ENUM
3720   BFD_RELOC_D30V_6
3721 ENUMDOC
3722   Mitsubishi D30V relocs.
3723   This is a 6-bit absolute reloc.
3724 ENUM
3725   BFD_RELOC_D30V_9_PCREL
3726 ENUMDOC
3727   This is a 6-bit pc-relative reloc with
3728   the right 3 bits assumed to be 0.
3729 ENUM
3730   BFD_RELOC_D30V_9_PCREL_R
3731 ENUMDOC
3732   This is a 6-bit pc-relative reloc with
3733   the right 3 bits assumed to be 0. Same
3734   as the previous reloc but on the right side
3735   of the container.
3736 ENUM
3737   BFD_RELOC_D30V_15
3738 ENUMDOC
3739   This is a 12-bit absolute reloc with the
3740   right 3 bitsassumed to be 0.
3741 ENUM
3742   BFD_RELOC_D30V_15_PCREL
3743 ENUMDOC
3744   This is a 12-bit pc-relative reloc with
3745   the right 3 bits assumed to be 0.
3746 ENUM
3747   BFD_RELOC_D30V_15_PCREL_R
3748 ENUMDOC
3749   This is a 12-bit pc-relative reloc with
3750   the right 3 bits assumed to be 0. Same
3751   as the previous reloc but on the right side
3752   of the container.
3753 ENUM
3754   BFD_RELOC_D30V_21
3755 ENUMDOC
3756   This is an 18-bit absolute reloc with
3757   the right 3 bits assumed to be 0.
3758 ENUM
3759   BFD_RELOC_D30V_21_PCREL
3760 ENUMDOC
3761   This is an 18-bit pc-relative reloc with
3762   the right 3 bits assumed to be 0.
3763 ENUM
3764   BFD_RELOC_D30V_21_PCREL_R
3765 ENUMDOC
3766   This is an 18-bit pc-relative reloc with
3767   the right 3 bits assumed to be 0. Same
3768   as the previous reloc but on the right side
3769   of the container.
3770 ENUM
3771   BFD_RELOC_D30V_32
3772 ENUMDOC
3773   This is a 32-bit absolute reloc.
3774 ENUM
3775   BFD_RELOC_D30V_32_PCREL
3776 ENUMDOC
3777   This is a 32-bit pc-relative reloc.
3778
3779 ENUM
3780   BFD_RELOC_DLX_HI16_S
3781 ENUMDOC
3782   DLX relocs
3783 ENUM
3784   BFD_RELOC_DLX_LO16
3785 ENUMDOC
3786   DLX relocs
3787 ENUM
3788   BFD_RELOC_DLX_JMP26
3789 ENUMDOC
3790   DLX relocs
3791
3792 ENUM
3793   BFD_RELOC_M32C_HI8
3794 ENUMX
3795   BFD_RELOC_M32C_RL_JUMP
3796 ENUMX
3797   BFD_RELOC_M32C_RL_1ADDR
3798 ENUMX
3799   BFD_RELOC_M32C_RL_2ADDR
3800 ENUMDOC
3801   Renesas M16C/M32C Relocations.
3802
3803 ENUM
3804   BFD_RELOC_M32R_24
3805 ENUMDOC
3806   Renesas M32R (formerly Mitsubishi M32R) relocs.
3807   This is a 24 bit absolute address.
3808 ENUM
3809   BFD_RELOC_M32R_10_PCREL
3810 ENUMDOC
3811   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3812 ENUM
3813   BFD_RELOC_M32R_18_PCREL
3814 ENUMDOC
3815   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3816 ENUM
3817   BFD_RELOC_M32R_26_PCREL
3818 ENUMDOC
3819   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3820 ENUM
3821   BFD_RELOC_M32R_HI16_ULO
3822 ENUMDOC
3823   This is a 16-bit reloc containing the high 16 bits of an address
3824   used when the lower 16 bits are treated as unsigned.
3825 ENUM
3826   BFD_RELOC_M32R_HI16_SLO
3827 ENUMDOC
3828   This is a 16-bit reloc containing the high 16 bits of an address
3829   used when the lower 16 bits are treated as signed.
3830 ENUM
3831   BFD_RELOC_M32R_LO16
3832 ENUMDOC
3833   This is a 16-bit reloc containing the lower 16 bits of an address.
3834 ENUM
3835   BFD_RELOC_M32R_SDA16
3836 ENUMDOC
3837   This is a 16-bit reloc containing the small data area offset for use in
3838   add3, load, and store instructions.
3839 ENUM
3840   BFD_RELOC_M32R_GOT24
3841 ENUMX
3842   BFD_RELOC_M32R_26_PLTREL
3843 ENUMX
3844   BFD_RELOC_M32R_COPY
3845 ENUMX
3846   BFD_RELOC_M32R_GLOB_DAT
3847 ENUMX
3848   BFD_RELOC_M32R_JMP_SLOT
3849 ENUMX
3850   BFD_RELOC_M32R_RELATIVE
3851 ENUMX
3852   BFD_RELOC_M32R_GOTOFF
3853 ENUMX
3854   BFD_RELOC_M32R_GOTOFF_HI_ULO
3855 ENUMX
3856   BFD_RELOC_M32R_GOTOFF_HI_SLO
3857 ENUMX
3858   BFD_RELOC_M32R_GOTOFF_LO
3859 ENUMX
3860   BFD_RELOC_M32R_GOTPC24
3861 ENUMX
3862   BFD_RELOC_M32R_GOT16_HI_ULO
3863 ENUMX
3864   BFD_RELOC_M32R_GOT16_HI_SLO
3865 ENUMX
3866   BFD_RELOC_M32R_GOT16_LO
3867 ENUMX
3868   BFD_RELOC_M32R_GOTPC_HI_ULO
3869 ENUMX
3870   BFD_RELOC_M32R_GOTPC_HI_SLO
3871 ENUMX
3872   BFD_RELOC_M32R_GOTPC_LO
3873 ENUMDOC
3874   For PIC.
3875
3876
3877 ENUM
3878   BFD_RELOC_NDS32_20
3879 ENUMDOC
3880   NDS32 relocs.
3881   This is a 20 bit absolute address.
3882 ENUM
3883   BFD_RELOC_NDS32_9_PCREL
3884 ENUMDOC
3885   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
3886 ENUM
3887   BFD_RELOC_NDS32_WORD_9_PCREL
3888 ENUMDOC
3889   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
3890 ENUM
3891   BFD_RELOC_NDS32_15_PCREL
3892 ENUMDOC
3893   This is an 15-bit reloc with the right 1 bit assumed to be 0.
3894 ENUM
3895   BFD_RELOC_NDS32_17_PCREL
3896 ENUMDOC
3897   This is an 17-bit reloc with the right 1 bit assumed to be 0.
3898 ENUM
3899   BFD_RELOC_NDS32_25_PCREL
3900 ENUMDOC
3901   This is a 25-bit reloc with the right 1 bit assumed to be 0.
3902 ENUM
3903   BFD_RELOC_NDS32_HI20
3904 ENUMDOC
3905   This is a 20-bit reloc containing the high 20 bits of an address
3906   used with the lower 12 bits
3907 ENUM
3908   BFD_RELOC_NDS32_LO12S3
3909 ENUMDOC
3910   This is a 12-bit reloc containing the lower 12 bits of an address
3911   then shift right by 3. This is used with ldi,sdi...
3912 ENUM
3913   BFD_RELOC_NDS32_LO12S2
3914 ENUMDOC
3915   This is a 12-bit reloc containing the lower 12 bits of an address
3916   then shift left by 2. This is used with lwi,swi...
3917 ENUM
3918   BFD_RELOC_NDS32_LO12S1
3919 ENUMDOC
3920   This is a 12-bit reloc containing the lower 12 bits of an address
3921   then shift left by 1. This is used with lhi,shi...
3922 ENUM
3923   BFD_RELOC_NDS32_LO12S0
3924 ENUMDOC
3925   This is a 12-bit reloc containing the lower 12 bits of an address
3926   then shift left by 0. This is used with lbisbi...
3927 ENUM
3928   BFD_RELOC_NDS32_LO12S0_ORI
3929 ENUMDOC
3930   This is a 12-bit reloc containing the lower 12 bits of an address
3931   then shift left by 0. This is only used with branch relaxations
3932 ENUM
3933   BFD_RELOC_NDS32_SDA15S3
3934 ENUMDOC
3935   This is a 15-bit reloc containing the small data area 18-bit signed offset
3936   and shift left by 3 for use in ldi, sdi...
3937 ENUM
3938   BFD_RELOC_NDS32_SDA15S2
3939 ENUMDOC
3940   This is a 15-bit reloc containing the small data area 17-bit signed offset
3941   and shift left by 2 for use in lwi, swi...
3942 ENUM
3943   BFD_RELOC_NDS32_SDA15S1
3944 ENUMDOC
3945   This is a 15-bit reloc containing the small data area 16-bit signed offset
3946   and shift left by 1 for use in lhi, shi...
3947 ENUM
3948   BFD_RELOC_NDS32_SDA15S0
3949 ENUMDOC
3950   This is a 15-bit reloc containing the small data area 15-bit signed offset
3951   and shift left by 0 for use in lbi, sbi...
3952 ENUM
3953   BFD_RELOC_NDS32_SDA16S3
3954 ENUMDOC
3955   This is a 16-bit reloc containing the small data area 16-bit signed offset
3956   and shift left by 3
3957 ENUM
3958   BFD_RELOC_NDS32_SDA17S2
3959 ENUMDOC
3960   This is a 17-bit reloc containing the small data area 17-bit signed offset
3961   and shift left by 2 for use in lwi.gp, swi.gp...
3962 ENUM
3963   BFD_RELOC_NDS32_SDA18S1
3964 ENUMDOC
3965   This is a 18-bit reloc containing the small data area 18-bit signed offset
3966   and shift left by 1 for use in lhi.gp, shi.gp...
3967 ENUM
3968   BFD_RELOC_NDS32_SDA19S0
3969 ENUMDOC
3970   This is a 19-bit reloc containing the small data area 19-bit signed offset
3971   and shift left by 0 for use in lbi.gp, sbi.gp...
3972 ENUM
3973   BFD_RELOC_NDS32_GOT20
3974 ENUMX
3975   BFD_RELOC_NDS32_9_PLTREL
3976 ENUMX
3977   BFD_RELOC_NDS32_25_PLTREL
3978 ENUMX
3979   BFD_RELOC_NDS32_COPY
3980 ENUMX
3981   BFD_RELOC_NDS32_GLOB_DAT
3982 ENUMX
3983   BFD_RELOC_NDS32_JMP_SLOT
3984 ENUMX
3985   BFD_RELOC_NDS32_RELATIVE
3986 ENUMX
3987   BFD_RELOC_NDS32_GOTOFF
3988 ENUMX
3989   BFD_RELOC_NDS32_GOTOFF_HI20
3990 ENUMX
3991   BFD_RELOC_NDS32_GOTOFF_LO12
3992 ENUMX
3993   BFD_RELOC_NDS32_GOTPC20
3994 ENUMX
3995   BFD_RELOC_NDS32_GOT_HI20
3996 ENUMX
3997   BFD_RELOC_NDS32_GOT_LO12
3998 ENUMX
3999   BFD_RELOC_NDS32_GOTPC_HI20
4000 ENUMX
4001   BFD_RELOC_NDS32_GOTPC_LO12
4002 ENUMDOC
4003   for PIC
4004 ENUM
4005   BFD_RELOC_NDS32_INSN16
4006 ENUMX
4007   BFD_RELOC_NDS32_LABEL
4008 ENUMX
4009   BFD_RELOC_NDS32_LONGCALL1
4010 ENUMX
4011   BFD_RELOC_NDS32_LONGCALL2
4012 ENUMX
4013   BFD_RELOC_NDS32_LONGCALL3
4014 ENUMX
4015   BFD_RELOC_NDS32_LONGJUMP1
4016 ENUMX
4017   BFD_RELOC_NDS32_LONGJUMP2
4018 ENUMX
4019   BFD_RELOC_NDS32_LONGJUMP3
4020 ENUMX
4021   BFD_RELOC_NDS32_LOADSTORE
4022 ENUMX
4023   BFD_RELOC_NDS32_9_FIXED
4024 ENUMX
4025   BFD_RELOC_NDS32_15_FIXED
4026 ENUMX
4027   BFD_RELOC_NDS32_17_FIXED
4028 ENUMX
4029   BFD_RELOC_NDS32_25_FIXED
4030 ENUMX
4031   BFD_RELOC_NDS32_LONGCALL4
4032 ENUMX
4033   BFD_RELOC_NDS32_LONGCALL5
4034 ENUMX
4035   BFD_RELOC_NDS32_LONGCALL6
4036 ENUMX
4037   BFD_RELOC_NDS32_LONGJUMP4
4038 ENUMX
4039   BFD_RELOC_NDS32_LONGJUMP5
4040 ENUMX
4041   BFD_RELOC_NDS32_LONGJUMP6
4042 ENUMX
4043   BFD_RELOC_NDS32_LONGJUMP7
4044 ENUMDOC
4045   for relax
4046 ENUM
4047   BFD_RELOC_NDS32_PLTREL_HI20
4048 ENUMX
4049   BFD_RELOC_NDS32_PLTREL_LO12
4050 ENUMX
4051   BFD_RELOC_NDS32_PLT_GOTREL_HI20
4052 ENUMX
4053   BFD_RELOC_NDS32_PLT_GOTREL_LO12
4054 ENUMDOC
4055   for PIC
4056 ENUM
4057   BFD_RELOC_NDS32_SDA12S2_DP
4058 ENUMX
4059   BFD_RELOC_NDS32_SDA12S2_SP
4060 ENUMX
4061   BFD_RELOC_NDS32_LO12S2_DP
4062 ENUMX
4063   BFD_RELOC_NDS32_LO12S2_SP
4064 ENUMDOC
4065   for floating point
4066 ENUM
4067   BFD_RELOC_NDS32_DWARF2_OP1
4068 ENUMX
4069   BFD_RELOC_NDS32_DWARF2_OP2
4070 ENUMX
4071   BFD_RELOC_NDS32_DWARF2_LEB
4072 ENUMDOC
4073   for dwarf2 debug_line.
4074 ENUM
4075   BFD_RELOC_NDS32_UPDATE_TA
4076 ENUMDOC
4077   for eliminate 16-bit instructions
4078 ENUM
4079   BFD_RELOC_NDS32_PLT_GOTREL_LO20
4080 ENUMX
4081   BFD_RELOC_NDS32_PLT_GOTREL_LO15
4082 ENUMX
4083   BFD_RELOC_NDS32_PLT_GOTREL_LO19
4084 ENUMX
4085   BFD_RELOC_NDS32_GOT_LO15
4086 ENUMX
4087   BFD_RELOC_NDS32_GOT_LO19
4088 ENUMX
4089   BFD_RELOC_NDS32_GOTOFF_LO15
4090 ENUMX
4091   BFD_RELOC_NDS32_GOTOFF_LO19
4092 ENUMX
4093   BFD_RELOC_NDS32_GOT15S2
4094 ENUMX
4095   BFD_RELOC_NDS32_GOT17S2
4096 ENUMDOC
4097   for PIC object relaxation
4098 ENUM
4099   BFD_RELOC_NDS32_5
4100 ENUMDOC
4101   NDS32 relocs.
4102   This is a 5 bit absolute address.
4103 ENUM
4104   BFD_RELOC_NDS32_10_UPCREL
4105 ENUMDOC
4106   This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4107 ENUM
4108   BFD_RELOC_NDS32_SDA_FP7U2_RELA
4109 ENUMDOC
4110   If fp were omitted, fp can used as another gp.
4111 ENUM
4112   BFD_RELOC_NDS32_RELAX_ENTRY
4113 ENUMX
4114   BFD_RELOC_NDS32_GOT_SUFF
4115 ENUMX
4116   BFD_RELOC_NDS32_GOTOFF_SUFF
4117 ENUMX
4118   BFD_RELOC_NDS32_PLT_GOT_SUFF
4119 ENUMX
4120   BFD_RELOC_NDS32_MULCALL_SUFF
4121 ENUMX
4122   BFD_RELOC_NDS32_PTR
4123 ENUMX
4124   BFD_RELOC_NDS32_PTR_COUNT
4125 ENUMX
4126   BFD_RELOC_NDS32_PTR_RESOLVED
4127 ENUMX
4128   BFD_RELOC_NDS32_PLTBLOCK
4129 ENUMX
4130   BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4131 ENUMX
4132   BFD_RELOC_NDS32_RELAX_REGION_END
4133 ENUMX
4134   BFD_RELOC_NDS32_MINUEND
4135 ENUMX
4136   BFD_RELOC_NDS32_SUBTRAHEND
4137 ENUMX
4138   BFD_RELOC_NDS32_DIFF8
4139 ENUMX
4140   BFD_RELOC_NDS32_DIFF16
4141 ENUMX
4142   BFD_RELOC_NDS32_DIFF32
4143 ENUMX
4144   BFD_RELOC_NDS32_DIFF_ULEB128
4145 ENUMX
4146   BFD_RELOC_NDS32_EMPTY
4147 ENUMDOC
4148   relaxation relative relocation types
4149 ENUM
4150   BFD_RELOC_NDS32_25_ABS
4151 ENUMDOC
4152   This is a 25 bit absolute address.
4153 ENUM
4154   BFD_RELOC_NDS32_DATA
4155 ENUMX
4156   BFD_RELOC_NDS32_TRAN
4157 ENUMX
4158   BFD_RELOC_NDS32_17IFC_PCREL
4159 ENUMX
4160   BFD_RELOC_NDS32_10IFCU_PCREL
4161 ENUMDOC
4162   For ex9 and ifc using.
4163 ENUM
4164   BFD_RELOC_NDS32_TPOFF
4165 ENUMX
4166   BFD_RELOC_NDS32_TLS_LE_HI20
4167 ENUMX
4168   BFD_RELOC_NDS32_TLS_LE_LO12
4169 ENUMX
4170   BFD_RELOC_NDS32_TLS_LE_ADD
4171 ENUMX
4172   BFD_RELOC_NDS32_TLS_LE_LS
4173 ENUMX
4174   BFD_RELOC_NDS32_GOTTPOFF
4175 ENUMX
4176   BFD_RELOC_NDS32_TLS_IE_HI20
4177 ENUMX
4178   BFD_RELOC_NDS32_TLS_IE_LO12S2
4179 ENUMX
4180   BFD_RELOC_NDS32_TLS_TPOFF
4181 ENUMX
4182   BFD_RELOC_NDS32_TLS_LE_20
4183 ENUMX
4184   BFD_RELOC_NDS32_TLS_LE_15S0
4185 ENUMX
4186   BFD_RELOC_NDS32_TLS_LE_15S1
4187 ENUMX
4188   BFD_RELOC_NDS32_TLS_LE_15S2
4189 ENUMDOC
4190   For TLS.
4191
4192
4193 ENUM
4194   BFD_RELOC_V850_9_PCREL
4195 ENUMDOC
4196   This is a 9-bit reloc
4197 ENUM
4198   BFD_RELOC_V850_22_PCREL
4199 ENUMDOC
4200   This is a 22-bit reloc
4201
4202 ENUM
4203   BFD_RELOC_V850_SDA_16_16_OFFSET
4204 ENUMDOC
4205   This is a 16 bit offset from the short data area pointer.
4206 ENUM
4207   BFD_RELOC_V850_SDA_15_16_OFFSET
4208 ENUMDOC
4209   This is a 16 bit offset (of which only 15 bits are used) from the
4210   short data area pointer.
4211 ENUM
4212   BFD_RELOC_V850_ZDA_16_16_OFFSET
4213 ENUMDOC
4214   This is a 16 bit offset from the zero data area pointer.
4215 ENUM
4216   BFD_RELOC_V850_ZDA_15_16_OFFSET
4217 ENUMDOC
4218   This is a 16 bit offset (of which only 15 bits are used) from the
4219   zero data area pointer.
4220 ENUM
4221   BFD_RELOC_V850_TDA_6_8_OFFSET
4222 ENUMDOC
4223   This is an 8 bit offset (of which only 6 bits are used) from the
4224   tiny data area pointer.
4225 ENUM
4226   BFD_RELOC_V850_TDA_7_8_OFFSET
4227 ENUMDOC
4228   This is an 8bit offset (of which only 7 bits are used) from the tiny
4229   data area pointer.
4230 ENUM
4231   BFD_RELOC_V850_TDA_7_7_OFFSET
4232 ENUMDOC
4233   This is a 7 bit offset from the tiny data area pointer.
4234 ENUM
4235   BFD_RELOC_V850_TDA_16_16_OFFSET
4236 ENUMDOC
4237   This is a 16 bit offset from the tiny data area pointer.
4238 COMMENT
4239 ENUM
4240   BFD_RELOC_V850_TDA_4_5_OFFSET
4241 ENUMDOC
4242   This is a 5 bit offset (of which only 4 bits are used) from the tiny
4243   data area pointer.
4244 ENUM
4245   BFD_RELOC_V850_TDA_4_4_OFFSET
4246 ENUMDOC
4247   This is a 4 bit offset from the tiny data area pointer.
4248 ENUM
4249   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4250 ENUMDOC
4251   This is a 16 bit offset from the short data area pointer, with the
4252   bits placed non-contiguously in the instruction.
4253 ENUM
4254   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4255 ENUMDOC
4256   This is a 16 bit offset from the zero data area pointer, with the
4257   bits placed non-contiguously in the instruction.
4258 ENUM
4259   BFD_RELOC_V850_CALLT_6_7_OFFSET
4260 ENUMDOC
4261   This is a 6 bit offset from the call table base pointer.
4262 ENUM
4263   BFD_RELOC_V850_CALLT_16_16_OFFSET
4264 ENUMDOC
4265   This is a 16 bit offset from the call table base pointer.
4266 ENUM
4267   BFD_RELOC_V850_LONGCALL
4268 ENUMDOC
4269   Used for relaxing indirect function calls.
4270 ENUM
4271   BFD_RELOC_V850_LONGJUMP
4272 ENUMDOC
4273   Used for relaxing indirect jumps.
4274 ENUM
4275   BFD_RELOC_V850_ALIGN
4276 ENUMDOC
4277   Used to maintain alignment whilst relaxing.
4278 ENUM
4279   BFD_RELOC_V850_LO16_SPLIT_OFFSET
4280 ENUMDOC
4281   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4282   instructions.
4283 ENUM
4284   BFD_RELOC_V850_16_PCREL
4285 ENUMDOC
4286   This is a 16-bit reloc.
4287 ENUM
4288   BFD_RELOC_V850_17_PCREL
4289 ENUMDOC
4290   This is a 17-bit reloc.
4291 ENUM
4292   BFD_RELOC_V850_23
4293 ENUMDOC
4294   This is a 23-bit reloc.
4295 ENUM
4296   BFD_RELOC_V850_32_PCREL
4297 ENUMDOC
4298   This is a 32-bit reloc.
4299 ENUM
4300   BFD_RELOC_V850_32_ABS
4301 ENUMDOC
4302   This is a 32-bit reloc.
4303 ENUM
4304   BFD_RELOC_V850_16_SPLIT_OFFSET
4305 ENUMDOC
4306   This is a 16-bit reloc.
4307 ENUM
4308   BFD_RELOC_V850_16_S1
4309 ENUMDOC
4310   This is a 16-bit reloc.
4311 ENUM
4312   BFD_RELOC_V850_LO16_S1
4313 ENUMDOC
4314   Low 16 bits. 16 bit shifted by 1.
4315 ENUM
4316   BFD_RELOC_V850_CALLT_15_16_OFFSET
4317 ENUMDOC
4318   This is a 16 bit offset from the call table base pointer.
4319 ENUM
4320   BFD_RELOC_V850_32_GOTPCREL
4321 ENUMDOC
4322   DSO relocations.
4323 ENUM
4324   BFD_RELOC_V850_16_GOT
4325 ENUMDOC
4326   DSO relocations.
4327 ENUM
4328   BFD_RELOC_V850_32_GOT
4329 ENUMDOC
4330   DSO relocations.
4331 ENUM
4332   BFD_RELOC_V850_22_PLT_PCREL
4333 ENUMDOC
4334   DSO relocations.
4335 ENUM
4336   BFD_RELOC_V850_32_PLT_PCREL
4337 ENUMDOC
4338   DSO relocations.
4339 ENUM
4340   BFD_RELOC_V850_COPY
4341 ENUMDOC
4342   DSO relocations.
4343 ENUM
4344   BFD_RELOC_V850_GLOB_DAT
4345 ENUMDOC
4346   DSO relocations.
4347 ENUM
4348   BFD_RELOC_V850_JMP_SLOT
4349 ENUMDOC
4350   DSO relocations.
4351 ENUM
4352   BFD_RELOC_V850_RELATIVE
4353 ENUMDOC
4354   DSO relocations.
4355 ENUM
4356   BFD_RELOC_V850_16_GOTOFF
4357 ENUMDOC
4358   DSO relocations.
4359 ENUM
4360   BFD_RELOC_V850_32_GOTOFF
4361 ENUMDOC
4362   DSO relocations.
4363 ENUM
4364   BFD_RELOC_V850_CODE
4365 ENUMDOC
4366   start code.
4367 ENUM
4368   BFD_RELOC_V850_DATA
4369 ENUMDOC
4370   start data in text.
4371
4372 ENUM
4373   BFD_RELOC_TIC30_LDP
4374 ENUMDOC
4375   This is a 8bit DP reloc for the tms320c30, where the most
4376   significant 8 bits of a 24 bit word are placed into the least
4377   significant 8 bits of the opcode.
4378
4379 ENUM
4380   BFD_RELOC_TIC54X_PARTLS7
4381 ENUMDOC
4382   This is a 7bit reloc for the tms320c54x, where the least
4383   significant 7 bits of a 16 bit word are placed into the least
4384   significant 7 bits of the opcode.
4385
4386 ENUM
4387   BFD_RELOC_TIC54X_PARTMS9
4388 ENUMDOC
4389   This is a 9bit DP reloc for the tms320c54x, where the most
4390   significant 9 bits of a 16 bit word are placed into the least
4391   significant 9 bits of the opcode.
4392
4393 ENUM
4394   BFD_RELOC_TIC54X_23
4395 ENUMDOC
4396   This is an extended address 23-bit reloc for the tms320c54x.
4397
4398 ENUM
4399   BFD_RELOC_TIC54X_16_OF_23
4400 ENUMDOC
4401   This is a 16-bit reloc for the tms320c54x, where the least
4402   significant 16 bits of a 23-bit extended address are placed into
4403   the opcode.
4404
4405 ENUM
4406   BFD_RELOC_TIC54X_MS7_OF_23
4407 ENUMDOC
4408   This is a reloc for the tms320c54x, where the most
4409   significant 7 bits of a 23-bit extended address are placed into
4410   the opcode.
4411
4412 ENUM
4413   BFD_RELOC_C6000_PCR_S21
4414 ENUMX
4415   BFD_RELOC_C6000_PCR_S12
4416 ENUMX
4417   BFD_RELOC_C6000_PCR_S10
4418 ENUMX
4419   BFD_RELOC_C6000_PCR_S7
4420 ENUMX
4421   BFD_RELOC_C6000_ABS_S16
4422 ENUMX
4423   BFD_RELOC_C6000_ABS_L16
4424 ENUMX
4425   BFD_RELOC_C6000_ABS_H16
4426 ENUMX
4427   BFD_RELOC_C6000_SBR_U15_B
4428 ENUMX
4429   BFD_RELOC_C6000_SBR_U15_H
4430 ENUMX
4431   BFD_RELOC_C6000_SBR_U15_W
4432 ENUMX
4433   BFD_RELOC_C6000_SBR_S16
4434 ENUMX
4435   BFD_RELOC_C6000_SBR_L16_B
4436 ENUMX
4437   BFD_RELOC_C6000_SBR_L16_H
4438 ENUMX
4439   BFD_RELOC_C6000_SBR_L16_W
4440 ENUMX
4441   BFD_RELOC_C6000_SBR_H16_B
4442 ENUMX
4443   BFD_RELOC_C6000_SBR_H16_H
4444 ENUMX
4445   BFD_RELOC_C6000_SBR_H16_W
4446 ENUMX
4447   BFD_RELOC_C6000_SBR_GOT_U15_W
4448 ENUMX
4449   BFD_RELOC_C6000_SBR_GOT_L16_W
4450 ENUMX
4451   BFD_RELOC_C6000_SBR_GOT_H16_W
4452 ENUMX
4453   BFD_RELOC_C6000_DSBT_INDEX
4454 ENUMX
4455   BFD_RELOC_C6000_PREL31
4456 ENUMX
4457   BFD_RELOC_C6000_COPY
4458 ENUMX
4459   BFD_RELOC_C6000_JUMP_SLOT
4460 ENUMX
4461   BFD_RELOC_C6000_EHTYPE
4462 ENUMX
4463   BFD_RELOC_C6000_PCR_H16
4464 ENUMX
4465   BFD_RELOC_C6000_PCR_L16
4466 ENUMX
4467   BFD_RELOC_C6000_ALIGN
4468 ENUMX
4469   BFD_RELOC_C6000_FPHEAD
4470 ENUMX
4471   BFD_RELOC_C6000_NOCMP
4472 ENUMDOC
4473   TMS320C6000 relocations.
4474
4475 ENUM
4476   BFD_RELOC_FR30_48
4477 ENUMDOC
4478   This is a 48 bit reloc for the FR30 that stores 32 bits.
4479 ENUM
4480   BFD_RELOC_FR30_20
4481 ENUMDOC
4482   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4483   two sections.
4484 ENUM
4485   BFD_RELOC_FR30_6_IN_4
4486 ENUMDOC
4487   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4488   4 bits.
4489 ENUM
4490   BFD_RELOC_FR30_8_IN_8
4491 ENUMDOC
4492   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4493   into 8 bits.
4494 ENUM
4495   BFD_RELOC_FR30_9_IN_8
4496 ENUMDOC
4497   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4498   into 8 bits.
4499 ENUM
4500   BFD_RELOC_FR30_10_IN_8
4501 ENUMDOC
4502   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4503   into 8 bits.
4504 ENUM
4505   BFD_RELOC_FR30_9_PCREL
4506 ENUMDOC
4507   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4508   short offset into 8 bits.
4509 ENUM
4510   BFD_RELOC_FR30_12_PCREL
4511 ENUMDOC
4512   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4513   short offset into 11 bits.
4514
4515 ENUM
4516   BFD_RELOC_MCORE_PCREL_IMM8BY4
4517 ENUMX
4518   BFD_RELOC_MCORE_PCREL_IMM11BY2
4519 ENUMX
4520   BFD_RELOC_MCORE_PCREL_IMM4BY2
4521 ENUMX
4522   BFD_RELOC_MCORE_PCREL_32
4523 ENUMX
4524   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4525 ENUMX
4526   BFD_RELOC_MCORE_RVA
4527 ENUMDOC
4528   Motorola Mcore relocations.
4529
4530 ENUM
4531   BFD_RELOC_MEP_8
4532 ENUMX
4533   BFD_RELOC_MEP_16
4534 ENUMX
4535   BFD_RELOC_MEP_32
4536 ENUMX
4537   BFD_RELOC_MEP_PCREL8A2
4538 ENUMX
4539   BFD_RELOC_MEP_PCREL12A2
4540 ENUMX
4541   BFD_RELOC_MEP_PCREL17A2
4542 ENUMX
4543   BFD_RELOC_MEP_PCREL24A2
4544 ENUMX
4545   BFD_RELOC_MEP_PCABS24A2
4546 ENUMX
4547   BFD_RELOC_MEP_LOW16
4548 ENUMX
4549   BFD_RELOC_MEP_HI16U
4550 ENUMX
4551   BFD_RELOC_MEP_HI16S
4552 ENUMX
4553   BFD_RELOC_MEP_GPREL
4554 ENUMX
4555   BFD_RELOC_MEP_TPREL
4556 ENUMX
4557   BFD_RELOC_MEP_TPREL7
4558 ENUMX
4559   BFD_RELOC_MEP_TPREL7A2
4560 ENUMX
4561   BFD_RELOC_MEP_TPREL7A4
4562 ENUMX
4563   BFD_RELOC_MEP_UIMM24
4564 ENUMX
4565   BFD_RELOC_MEP_ADDR24A4
4566 ENUMX
4567   BFD_RELOC_MEP_GNU_VTINHERIT
4568 ENUMX
4569   BFD_RELOC_MEP_GNU_VTENTRY
4570 ENUMDOC
4571   Toshiba Media Processor Relocations.
4572 COMMENT
4573
4574 ENUM
4575   BFD_RELOC_METAG_HIADDR16
4576 ENUMX
4577   BFD_RELOC_METAG_LOADDR16
4578 ENUMX
4579   BFD_RELOC_METAG_RELBRANCH
4580 ENUMX
4581   BFD_RELOC_METAG_GETSETOFF
4582 ENUMX
4583   BFD_RELOC_METAG_HIOG
4584 ENUMX
4585   BFD_RELOC_METAG_LOOG
4586 ENUMX
4587   BFD_RELOC_METAG_REL8
4588 ENUMX
4589   BFD_RELOC_METAG_REL16
4590 ENUMX
4591   BFD_RELOC_METAG_HI16_GOTOFF
4592 ENUMX
4593   BFD_RELOC_METAG_LO16_GOTOFF
4594 ENUMX
4595   BFD_RELOC_METAG_GETSET_GOTOFF
4596 ENUMX
4597   BFD_RELOC_METAG_GETSET_GOT
4598 ENUMX
4599   BFD_RELOC_METAG_HI16_GOTPC
4600 ENUMX
4601   BFD_RELOC_METAG_LO16_GOTPC
4602 ENUMX
4603   BFD_RELOC_METAG_HI16_PLT
4604 ENUMX
4605   BFD_RELOC_METAG_LO16_PLT
4606 ENUMX
4607   BFD_RELOC_METAG_RELBRANCH_PLT
4608 ENUMX
4609   BFD_RELOC_METAG_GOTOFF
4610 ENUMX
4611   BFD_RELOC_METAG_PLT
4612 ENUMX
4613   BFD_RELOC_METAG_COPY
4614 ENUMX
4615   BFD_RELOC_METAG_JMP_SLOT
4616 ENUMX
4617   BFD_RELOC_METAG_RELATIVE
4618 ENUMX
4619   BFD_RELOC_METAG_GLOB_DAT
4620 ENUMX
4621   BFD_RELOC_METAG_TLS_GD
4622 ENUMX
4623   BFD_RELOC_METAG_TLS_LDM
4624 ENUMX
4625   BFD_RELOC_METAG_TLS_LDO_HI16
4626 ENUMX
4627   BFD_RELOC_METAG_TLS_LDO_LO16
4628 ENUMX
4629   BFD_RELOC_METAG_TLS_LDO
4630 ENUMX
4631   BFD_RELOC_METAG_TLS_IE
4632 ENUMX
4633   BFD_RELOC_METAG_TLS_IENONPIC
4634 ENUMX
4635   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4636 ENUMX
4637   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4638 ENUMX
4639   BFD_RELOC_METAG_TLS_TPOFF
4640 ENUMX
4641   BFD_RELOC_METAG_TLS_DTPMOD
4642 ENUMX
4643   BFD_RELOC_METAG_TLS_DTPOFF
4644 ENUMX
4645   BFD_RELOC_METAG_TLS_LE
4646 ENUMX
4647   BFD_RELOC_METAG_TLS_LE_HI16
4648 ENUMX
4649   BFD_RELOC_METAG_TLS_LE_LO16
4650 ENUMDOC
4651   Imagination Technologies Meta relocations.
4652
4653 ENUM
4654   BFD_RELOC_MMIX_GETA
4655 ENUMX
4656   BFD_RELOC_MMIX_GETA_1
4657 ENUMX
4658   BFD_RELOC_MMIX_GETA_2
4659 ENUMX
4660   BFD_RELOC_MMIX_GETA_3
4661 ENUMDOC
4662   These are relocations for the GETA instruction.
4663 ENUM
4664   BFD_RELOC_MMIX_CBRANCH
4665 ENUMX
4666   BFD_RELOC_MMIX_CBRANCH_J
4667 ENUMX
4668   BFD_RELOC_MMIX_CBRANCH_1
4669 ENUMX
4670   BFD_RELOC_MMIX_CBRANCH_2
4671 ENUMX
4672   BFD_RELOC_MMIX_CBRANCH_3
4673 ENUMDOC
4674   These are relocations for a conditional branch instruction.
4675 ENUM
4676   BFD_RELOC_MMIX_PUSHJ
4677 ENUMX
4678   BFD_RELOC_MMIX_PUSHJ_1
4679 ENUMX
4680   BFD_RELOC_MMIX_PUSHJ_2
4681 ENUMX
4682   BFD_RELOC_MMIX_PUSHJ_3
4683 ENUMX
4684   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4685 ENUMDOC
4686   These are relocations for the PUSHJ instruction.
4687 ENUM
4688   BFD_RELOC_MMIX_JMP
4689 ENUMX
4690   BFD_RELOC_MMIX_JMP_1
4691 ENUMX
4692   BFD_RELOC_MMIX_JMP_2
4693 ENUMX
4694   BFD_RELOC_MMIX_JMP_3
4695 ENUMDOC
4696   These are relocations for the JMP instruction.
4697 ENUM
4698   BFD_RELOC_MMIX_ADDR19
4699 ENUMDOC
4700   This is a relocation for a relative address as in a GETA instruction or
4701   a branch.
4702 ENUM
4703   BFD_RELOC_MMIX_ADDR27
4704 ENUMDOC
4705   This is a relocation for a relative address as in a JMP instruction.
4706 ENUM
4707   BFD_RELOC_MMIX_REG_OR_BYTE
4708 ENUMDOC
4709   This is a relocation for an instruction field that may be a general
4710   register or a value 0..255.
4711 ENUM
4712   BFD_RELOC_MMIX_REG
4713 ENUMDOC
4714   This is a relocation for an instruction field that may be a general
4715   register.
4716 ENUM
4717   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4718 ENUMDOC
4719   This is a relocation for two instruction fields holding a register and
4720   an offset, the equivalent of the relocation.
4721 ENUM
4722   BFD_RELOC_MMIX_LOCAL
4723 ENUMDOC
4724   This relocation is an assertion that the expression is not allocated as
4725   a global register.  It does not modify contents.
4726
4727 ENUM
4728   BFD_RELOC_AVR_7_PCREL
4729 ENUMDOC
4730   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4731   short offset into 7 bits.
4732 ENUM
4733   BFD_RELOC_AVR_13_PCREL
4734 ENUMDOC
4735   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4736   short offset into 12 bits.
4737 ENUM
4738   BFD_RELOC_AVR_16_PM
4739 ENUMDOC
4740   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4741   program memory address) into 16 bits.
4742 ENUM
4743   BFD_RELOC_AVR_LO8_LDI
4744 ENUMDOC
4745   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4746   data memory address) into 8 bit immediate value of LDI insn.
4747 ENUM
4748   BFD_RELOC_AVR_HI8_LDI
4749 ENUMDOC
4750   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4751   of data memory address) into 8 bit immediate value of LDI insn.
4752 ENUM
4753   BFD_RELOC_AVR_HH8_LDI
4754 ENUMDOC
4755   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4756   of program memory address) into 8 bit immediate value of LDI insn.
4757 ENUM
4758   BFD_RELOC_AVR_MS8_LDI
4759 ENUMDOC
4760   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4761   of 32 bit value) into 8 bit immediate value of LDI insn.
4762 ENUM
4763   BFD_RELOC_AVR_LO8_LDI_NEG
4764 ENUMDOC
4765   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4766   (usually data memory address) into 8 bit immediate value of SUBI insn.
4767 ENUM
4768   BFD_RELOC_AVR_HI8_LDI_NEG
4769 ENUMDOC
4770   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4771   (high 8 bit of data memory address) into 8 bit immediate value of
4772   SUBI insn.
4773 ENUM
4774   BFD_RELOC_AVR_HH8_LDI_NEG
4775 ENUMDOC
4776   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4777   (most high 8 bit of program memory address) into 8 bit immediate value
4778   of LDI or SUBI insn.
4779 ENUM
4780   BFD_RELOC_AVR_MS8_LDI_NEG
4781 ENUMDOC
4782   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4783   of 32 bit value) into 8 bit immediate value of LDI insn.
4784 ENUM
4785   BFD_RELOC_AVR_LO8_LDI_PM
4786 ENUMDOC
4787   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4788   command address) into 8 bit immediate value of LDI insn.
4789 ENUM
4790   BFD_RELOC_AVR_LO8_LDI_GS
4791 ENUMDOC
4792   This is a 16 bit reloc for the AVR that stores 8 bit value
4793   (command address) into 8 bit immediate value of LDI insn. If the address
4794   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4795   in the lower 128k.
4796 ENUM
4797   BFD_RELOC_AVR_HI8_LDI_PM
4798 ENUMDOC
4799   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4800   of command address) into 8 bit immediate value of LDI insn.
4801 ENUM
4802   BFD_RELOC_AVR_HI8_LDI_GS
4803 ENUMDOC
4804   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4805   of command address) into 8 bit immediate value of LDI insn.  If the address
4806   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4807   below 128k.
4808 ENUM
4809   BFD_RELOC_AVR_HH8_LDI_PM
4810 ENUMDOC
4811   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4812   of command address) into 8 bit immediate value of LDI insn.
4813 ENUM
4814   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4815 ENUMDOC
4816   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4817   (usually command address) into 8 bit immediate value of SUBI insn.
4818 ENUM
4819   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4820 ENUMDOC
4821   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4822   (high 8 bit of 16 bit command address) into 8 bit immediate value
4823   of SUBI insn.
4824 ENUM
4825   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4826 ENUMDOC
4827   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4828   (high 6 bit of 22 bit command address) into 8 bit immediate
4829   value of SUBI insn.
4830 ENUM
4831   BFD_RELOC_AVR_CALL
4832 ENUMDOC
4833   This is a 32 bit reloc for the AVR that stores 23 bit value
4834   into 22 bits.
4835 ENUM
4836   BFD_RELOC_AVR_LDI
4837 ENUMDOC
4838   This is a 16 bit reloc for the AVR that stores all needed bits
4839   for absolute addressing with ldi with overflow check to linktime
4840 ENUM
4841   BFD_RELOC_AVR_6
4842 ENUMDOC
4843   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4844   instructions
4845 ENUM
4846   BFD_RELOC_AVR_6_ADIW
4847 ENUMDOC
4848   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4849   instructions
4850 ENUM
4851   BFD_RELOC_AVR_8_LO
4852 ENUMDOC
4853   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
4854   in .byte lo8(symbol)
4855 ENUM
4856   BFD_RELOC_AVR_8_HI
4857 ENUMDOC
4858   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
4859   in .byte hi8(symbol)
4860 ENUM
4861   BFD_RELOC_AVR_8_HLO
4862 ENUMDOC
4863   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
4864   in .byte hlo8(symbol)
4865 ENUM
4866   BFD_RELOC_AVR_DIFF8
4867 ENUMX
4868   BFD_RELOC_AVR_DIFF16
4869 ENUMX
4870   BFD_RELOC_AVR_DIFF32
4871 ENUMDOC
4872   AVR relocations to mark the difference of two local symbols.
4873   These are only needed to support linker relaxation and can be ignored
4874   when not relaxing.  The field is set to the value of the difference
4875   assuming no relaxation.  The relocation encodes the position of the
4876   second symbol so the linker can determine whether to adjust the field
4877   value.
4878 ENUM
4879   BFD_RELOC_AVR_LDS_STS_16
4880 ENUMDOC
4881   This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
4882   lds and sts instructions supported only tiny core.
4883 ENUM
4884   BFD_RELOC_AVR_PORT6
4885 ENUMDOC
4886   This is a 6 bit reloc for the AVR that stores an I/O register
4887   number for the IN and OUT instructions
4888 ENUM
4889   BFD_RELOC_AVR_PORT5
4890 ENUMDOC
4891   This is a 5 bit reloc for the AVR that stores an I/O register
4892   number for the SBIC, SBIS, SBI and CBI instructions
4893 ENUM
4894   BFD_RELOC_RL78_NEG8
4895 ENUMX
4896   BFD_RELOC_RL78_NEG16
4897 ENUMX
4898   BFD_RELOC_RL78_NEG24
4899 ENUMX
4900   BFD_RELOC_RL78_NEG32
4901 ENUMX
4902   BFD_RELOC_RL78_16_OP
4903 ENUMX
4904   BFD_RELOC_RL78_24_OP
4905 ENUMX
4906   BFD_RELOC_RL78_32_OP
4907 ENUMX
4908   BFD_RELOC_RL78_8U
4909 ENUMX
4910   BFD_RELOC_RL78_16U
4911 ENUMX
4912   BFD_RELOC_RL78_24U
4913 ENUMX
4914   BFD_RELOC_RL78_DIR3U_PCREL
4915 ENUMX
4916   BFD_RELOC_RL78_DIFF
4917 ENUMX
4918   BFD_RELOC_RL78_GPRELB
4919 ENUMX
4920   BFD_RELOC_RL78_GPRELW
4921 ENUMX
4922   BFD_RELOC_RL78_GPRELL
4923 ENUMX
4924   BFD_RELOC_RL78_SYM
4925 ENUMX
4926   BFD_RELOC_RL78_OP_SUBTRACT
4927 ENUMX
4928   BFD_RELOC_RL78_OP_NEG
4929 ENUMX
4930   BFD_RELOC_RL78_OP_AND
4931 ENUMX
4932   BFD_RELOC_RL78_OP_SHRA
4933 ENUMX
4934   BFD_RELOC_RL78_ABS8
4935 ENUMX
4936   BFD_RELOC_RL78_ABS16
4937 ENUMX
4938   BFD_RELOC_RL78_ABS16_REV
4939 ENUMX
4940   BFD_RELOC_RL78_ABS32
4941 ENUMX
4942   BFD_RELOC_RL78_ABS32_REV
4943 ENUMX
4944   BFD_RELOC_RL78_ABS16U
4945 ENUMX
4946   BFD_RELOC_RL78_ABS16UW
4947 ENUMX
4948   BFD_RELOC_RL78_ABS16UL
4949 ENUMX
4950   BFD_RELOC_RL78_RELAX
4951 ENUMX
4952   BFD_RELOC_RL78_HI16
4953 ENUMX
4954   BFD_RELOC_RL78_HI8
4955 ENUMX
4956   BFD_RELOC_RL78_LO16
4957 ENUMX
4958   BFD_RELOC_RL78_CODE
4959 ENUMX
4960   BFD_RELOC_RL78_SADDR
4961 ENUMDOC
4962   Renesas RL78 Relocations.
4963
4964 ENUM
4965   BFD_RELOC_RX_NEG8
4966 ENUMX
4967   BFD_RELOC_RX_NEG16
4968 ENUMX
4969   BFD_RELOC_RX_NEG24
4970 ENUMX
4971   BFD_RELOC_RX_NEG32
4972 ENUMX
4973   BFD_RELOC_RX_16_OP
4974 ENUMX
4975   BFD_RELOC_RX_24_OP
4976 ENUMX
4977   BFD_RELOC_RX_32_OP
4978 ENUMX
4979   BFD_RELOC_RX_8U
4980 ENUMX
4981   BFD_RELOC_RX_16U
4982 ENUMX
4983   BFD_RELOC_RX_24U
4984 ENUMX
4985   BFD_RELOC_RX_DIR3U_PCREL
4986 ENUMX
4987   BFD_RELOC_RX_DIFF
4988 ENUMX
4989   BFD_RELOC_RX_GPRELB
4990 ENUMX
4991   BFD_RELOC_RX_GPRELW
4992 ENUMX
4993   BFD_RELOC_RX_GPRELL
4994 ENUMX
4995   BFD_RELOC_RX_SYM
4996 ENUMX
4997   BFD_RELOC_RX_OP_SUBTRACT
4998 ENUMX
4999   BFD_RELOC_RX_OP_NEG
5000 ENUMX
5001   BFD_RELOC_RX_ABS8
5002 ENUMX
5003   BFD_RELOC_RX_ABS16
5004 ENUMX
5005   BFD_RELOC_RX_ABS16_REV
5006 ENUMX
5007   BFD_RELOC_RX_ABS32
5008 ENUMX
5009   BFD_RELOC_RX_ABS32_REV
5010 ENUMX
5011   BFD_RELOC_RX_ABS16U
5012 ENUMX
5013   BFD_RELOC_RX_ABS16UW
5014 ENUMX
5015   BFD_RELOC_RX_ABS16UL
5016 ENUMX
5017   BFD_RELOC_RX_RELAX
5018 ENUMDOC
5019   Renesas RX Relocations.
5020
5021 ENUM
5022   BFD_RELOC_390_12
5023 ENUMDOC
5024    Direct 12 bit.
5025 ENUM
5026   BFD_RELOC_390_GOT12
5027 ENUMDOC
5028   12 bit GOT offset.
5029 ENUM
5030   BFD_RELOC_390_PLT32
5031 ENUMDOC
5032   32 bit PC relative PLT address.
5033 ENUM
5034   BFD_RELOC_390_COPY
5035 ENUMDOC
5036   Copy symbol at runtime.
5037 ENUM
5038   BFD_RELOC_390_GLOB_DAT
5039 ENUMDOC
5040   Create GOT entry.
5041 ENUM
5042   BFD_RELOC_390_JMP_SLOT
5043 ENUMDOC
5044   Create PLT entry.
5045 ENUM
5046   BFD_RELOC_390_RELATIVE
5047 ENUMDOC
5048   Adjust by program base.
5049 ENUM
5050   BFD_RELOC_390_GOTPC
5051 ENUMDOC
5052   32 bit PC relative offset to GOT.
5053 ENUM
5054   BFD_RELOC_390_GOT16
5055 ENUMDOC
5056   16 bit GOT offset.
5057 ENUM
5058   BFD_RELOC_390_PC12DBL
5059 ENUMDOC
5060   PC relative 12 bit shifted by 1.
5061 ENUM
5062   BFD_RELOC_390_PLT12DBL
5063 ENUMDOC
5064   12 bit PC rel. PLT shifted by 1.
5065 ENUM
5066   BFD_RELOC_390_PC16DBL
5067 ENUMDOC
5068   PC relative 16 bit shifted by 1.
5069 ENUM
5070   BFD_RELOC_390_PLT16DBL
5071 ENUMDOC
5072   16 bit PC rel. PLT shifted by 1.
5073 ENUM
5074   BFD_RELOC_390_PC24DBL
5075 ENUMDOC
5076   PC relative 24 bit shifted by 1.
5077 ENUM
5078   BFD_RELOC_390_PLT24DBL
5079 ENUMDOC
5080   24 bit PC rel. PLT shifted by 1.
5081 ENUM
5082   BFD_RELOC_390_PC32DBL
5083 ENUMDOC
5084   PC relative 32 bit shifted by 1.
5085 ENUM
5086   BFD_RELOC_390_PLT32DBL
5087 ENUMDOC
5088   32 bit PC rel. PLT shifted by 1.
5089 ENUM
5090   BFD_RELOC_390_GOTPCDBL
5091 ENUMDOC
5092   32 bit PC rel. GOT shifted by 1.
5093 ENUM
5094   BFD_RELOC_390_GOT64
5095 ENUMDOC
5096   64 bit GOT offset.
5097 ENUM
5098   BFD_RELOC_390_PLT64
5099 ENUMDOC
5100   64 bit PC relative PLT address.
5101 ENUM
5102   BFD_RELOC_390_GOTENT
5103 ENUMDOC
5104   32 bit rel. offset to GOT entry.
5105 ENUM
5106   BFD_RELOC_390_GOTOFF64
5107 ENUMDOC
5108   64 bit offset to GOT.
5109 ENUM
5110   BFD_RELOC_390_GOTPLT12
5111 ENUMDOC
5112   12-bit offset to symbol-entry within GOT, with PLT handling.
5113 ENUM
5114   BFD_RELOC_390_GOTPLT16
5115 ENUMDOC
5116   16-bit offset to symbol-entry within GOT, with PLT handling.
5117 ENUM
5118   BFD_RELOC_390_GOTPLT32
5119 ENUMDOC
5120   32-bit offset to symbol-entry within GOT, with PLT handling.
5121 ENUM
5122   BFD_RELOC_390_GOTPLT64
5123 ENUMDOC
5124   64-bit offset to symbol-entry within GOT, with PLT handling.
5125 ENUM
5126   BFD_RELOC_390_GOTPLTENT
5127 ENUMDOC
5128   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5129 ENUM
5130   BFD_RELOC_390_PLTOFF16
5131 ENUMDOC
5132   16-bit rel. offset from the GOT to a PLT entry.
5133 ENUM
5134   BFD_RELOC_390_PLTOFF32
5135 ENUMDOC
5136   32-bit rel. offset from the GOT to a PLT entry.
5137 ENUM
5138   BFD_RELOC_390_PLTOFF64
5139 ENUMDOC
5140   64-bit rel. offset from the GOT to a PLT entry.
5141
5142 ENUM
5143   BFD_RELOC_390_TLS_LOAD
5144 ENUMX
5145   BFD_RELOC_390_TLS_GDCALL
5146 ENUMX
5147   BFD_RELOC_390_TLS_LDCALL
5148 ENUMX
5149   BFD_RELOC_390_TLS_GD32
5150 ENUMX
5151   BFD_RELOC_390_TLS_GD64
5152 ENUMX
5153   BFD_RELOC_390_TLS_GOTIE12
5154 ENUMX
5155   BFD_RELOC_390_TLS_GOTIE32
5156 ENUMX
5157   BFD_RELOC_390_TLS_GOTIE64
5158 ENUMX
5159   BFD_RELOC_390_TLS_LDM32
5160 ENUMX
5161   BFD_RELOC_390_TLS_LDM64
5162 ENUMX
5163   BFD_RELOC_390_TLS_IE32
5164 ENUMX
5165   BFD_RELOC_390_TLS_IE64
5166 ENUMX
5167   BFD_RELOC_390_TLS_IEENT
5168 ENUMX
5169   BFD_RELOC_390_TLS_LE32
5170 ENUMX
5171   BFD_RELOC_390_TLS_LE64
5172 ENUMX
5173   BFD_RELOC_390_TLS_LDO32
5174 ENUMX
5175   BFD_RELOC_390_TLS_LDO64
5176 ENUMX
5177   BFD_RELOC_390_TLS_DTPMOD
5178 ENUMX
5179   BFD_RELOC_390_TLS_DTPOFF
5180 ENUMX
5181   BFD_RELOC_390_TLS_TPOFF
5182 ENUMDOC
5183   s390 tls relocations.
5184
5185 ENUM
5186   BFD_RELOC_390_20
5187 ENUMX
5188   BFD_RELOC_390_GOT20
5189 ENUMX
5190   BFD_RELOC_390_GOTPLT20
5191 ENUMX
5192   BFD_RELOC_390_TLS_GOTIE20
5193 ENUMDOC
5194   Long displacement extension.
5195
5196 ENUM
5197   BFD_RELOC_390_IRELATIVE
5198 ENUMDOC
5199   STT_GNU_IFUNC relocation.
5200
5201 ENUM
5202   BFD_RELOC_SCORE_GPREL15
5203 ENUMDOC
5204   Score relocations
5205   Low 16 bit for load/store
5206 ENUM
5207   BFD_RELOC_SCORE_DUMMY2
5208 ENUMX
5209   BFD_RELOC_SCORE_JMP
5210 ENUMDOC
5211   This is a 24-bit reloc with the right 1 bit assumed to be 0
5212 ENUM
5213   BFD_RELOC_SCORE_BRANCH
5214 ENUMDOC
5215   This is a 19-bit reloc with the right 1 bit assumed to be 0
5216 ENUM
5217   BFD_RELOC_SCORE_IMM30
5218 ENUMDOC
5219   This is a 32-bit reloc for 48-bit instructions.
5220 ENUM
5221   BFD_RELOC_SCORE_IMM32
5222 ENUMDOC
5223   This is a 32-bit reloc for 48-bit instructions.
5224 ENUM
5225   BFD_RELOC_SCORE16_JMP
5226 ENUMDOC
5227   This is a 11-bit reloc with the right 1 bit assumed to be 0
5228 ENUM
5229   BFD_RELOC_SCORE16_BRANCH
5230 ENUMDOC
5231   This is a 8-bit reloc with the right 1 bit assumed to be 0
5232 ENUM
5233   BFD_RELOC_SCORE_BCMP
5234 ENUMDOC
5235    This is a 9-bit reloc with the right 1 bit assumed to be 0
5236 ENUM
5237   BFD_RELOC_SCORE_GOT15
5238 ENUMX
5239   BFD_RELOC_SCORE_GOT_LO16
5240 ENUMX
5241   BFD_RELOC_SCORE_CALL15
5242 ENUMX
5243   BFD_RELOC_SCORE_DUMMY_HI16
5244 ENUMDOC
5245   Undocumented Score relocs
5246
5247 ENUM
5248   BFD_RELOC_IP2K_FR9
5249 ENUMDOC
5250   Scenix IP2K - 9-bit register number / data address
5251 ENUM
5252   BFD_RELOC_IP2K_BANK
5253 ENUMDOC
5254   Scenix IP2K - 4-bit register/data bank number
5255 ENUM
5256   BFD_RELOC_IP2K_ADDR16CJP
5257 ENUMDOC
5258   Scenix IP2K - low 13 bits of instruction word address
5259 ENUM
5260   BFD_RELOC_IP2K_PAGE3
5261 ENUMDOC
5262   Scenix IP2K - high 3 bits of instruction word address
5263 ENUM
5264   BFD_RELOC_IP2K_LO8DATA
5265 ENUMX
5266   BFD_RELOC_IP2K_HI8DATA
5267 ENUMX
5268   BFD_RELOC_IP2K_EX8DATA
5269 ENUMDOC
5270   Scenix IP2K - ext/low/high 8 bits of data address
5271 ENUM
5272   BFD_RELOC_IP2K_LO8INSN
5273 ENUMX
5274   BFD_RELOC_IP2K_HI8INSN
5275 ENUMDOC
5276   Scenix IP2K - low/high 8 bits of instruction word address
5277 ENUM
5278   BFD_RELOC_IP2K_PC_SKIP
5279 ENUMDOC
5280   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5281 ENUM
5282   BFD_RELOC_IP2K_TEXT
5283 ENUMDOC
5284   Scenix IP2K - 16 bit word address in text section.
5285 ENUM
5286   BFD_RELOC_IP2K_FR_OFFSET
5287 ENUMDOC
5288   Scenix IP2K - 7-bit sp or dp offset
5289 ENUM
5290   BFD_RELOC_VPE4KMATH_DATA
5291 ENUMX
5292   BFD_RELOC_VPE4KMATH_INSN
5293 ENUMDOC
5294   Scenix VPE4K coprocessor - data/insn-space addressing
5295
5296 ENUM
5297   BFD_RELOC_VTABLE_INHERIT
5298 ENUMX
5299   BFD_RELOC_VTABLE_ENTRY
5300 ENUMDOC
5301   These two relocations are used by the linker to determine which of
5302   the entries in a C++ virtual function table are actually used.  When
5303   the --gc-sections option is given, the linker will zero out the entries
5304   that are not used, so that the code for those functions need not be
5305   included in the output.
5306
5307   VTABLE_INHERIT is a zero-space relocation used to describe to the
5308   linker the inheritance tree of a C++ virtual function table.  The
5309   relocation's symbol should be the parent class' vtable, and the
5310   relocation should be located at the child vtable.
5311
5312   VTABLE_ENTRY is a zero-space relocation that describes the use of a
5313   virtual function table entry.  The reloc's symbol should refer to the
5314   table of the class mentioned in the code.  Off of that base, an offset
5315   describes the entry that is being used.  For Rela hosts, this offset
5316   is stored in the reloc's addend.  For Rel hosts, we are forced to put
5317   this offset in the reloc's section offset.
5318
5319 ENUM
5320   BFD_RELOC_IA64_IMM14
5321 ENUMX
5322   BFD_RELOC_IA64_IMM22
5323 ENUMX
5324   BFD_RELOC_IA64_IMM64
5325 ENUMX
5326   BFD_RELOC_IA64_DIR32MSB
5327 ENUMX
5328   BFD_RELOC_IA64_DIR32LSB
5329 ENUMX
5330   BFD_RELOC_IA64_DIR64MSB
5331 ENUMX
5332   BFD_RELOC_IA64_DIR64LSB
5333 ENUMX
5334   BFD_RELOC_IA64_GPREL22
5335 ENUMX
5336   BFD_RELOC_IA64_GPREL64I
5337 ENUMX
5338   BFD_RELOC_IA64_GPREL32MSB
5339 ENUMX
5340   BFD_RELOC_IA64_GPREL32LSB
5341 ENUMX
5342   BFD_RELOC_IA64_GPREL64MSB
5343 ENUMX
5344   BFD_RELOC_IA64_GPREL64LSB
5345 ENUMX
5346   BFD_RELOC_IA64_LTOFF22
5347 ENUMX
5348   BFD_RELOC_IA64_LTOFF64I
5349 ENUMX
5350   BFD_RELOC_IA64_PLTOFF22
5351 ENUMX
5352   BFD_RELOC_IA64_PLTOFF64I
5353 ENUMX
5354   BFD_RELOC_IA64_PLTOFF64MSB
5355 ENUMX
5356   BFD_RELOC_IA64_PLTOFF64LSB
5357 ENUMX
5358   BFD_RELOC_IA64_FPTR64I
5359 ENUMX
5360   BFD_RELOC_IA64_FPTR32MSB
5361 ENUMX
5362   BFD_RELOC_IA64_FPTR32LSB
5363 ENUMX
5364   BFD_RELOC_IA64_FPTR64MSB
5365 ENUMX
5366   BFD_RELOC_IA64_FPTR64LSB
5367 ENUMX
5368   BFD_RELOC_IA64_PCREL21B
5369 ENUMX
5370   BFD_RELOC_IA64_PCREL21BI
5371 ENUMX
5372   BFD_RELOC_IA64_PCREL21M
5373 ENUMX
5374   BFD_RELOC_IA64_PCREL21F
5375 ENUMX
5376   BFD_RELOC_IA64_PCREL22
5377 ENUMX
5378   BFD_RELOC_IA64_PCREL60B
5379 ENUMX
5380   BFD_RELOC_IA64_PCREL64I
5381 ENUMX
5382   BFD_RELOC_IA64_PCREL32MSB
5383 ENUMX
5384   BFD_RELOC_IA64_PCREL32LSB
5385 ENUMX
5386   BFD_RELOC_IA64_PCREL64MSB
5387 ENUMX
5388   BFD_RELOC_IA64_PCREL64LSB
5389 ENUMX
5390   BFD_RELOC_IA64_LTOFF_FPTR22
5391 ENUMX
5392   BFD_RELOC_IA64_LTOFF_FPTR64I
5393 ENUMX
5394   BFD_RELOC_IA64_LTOFF_FPTR32MSB
5395 ENUMX
5396   BFD_RELOC_IA64_LTOFF_FPTR32LSB
5397 ENUMX
5398   BFD_RELOC_IA64_LTOFF_FPTR64MSB
5399 ENUMX
5400   BFD_RELOC_IA64_LTOFF_FPTR64LSB
5401 ENUMX
5402   BFD_RELOC_IA64_SEGREL32MSB
5403 ENUMX
5404   BFD_RELOC_IA64_SEGREL32LSB
5405 ENUMX
5406   BFD_RELOC_IA64_SEGREL64MSB
5407 ENUMX
5408   BFD_RELOC_IA64_SEGREL64LSB
5409 ENUMX
5410   BFD_RELOC_IA64_SECREL32MSB
5411 ENUMX
5412   BFD_RELOC_IA64_SECREL32LSB
5413 ENUMX
5414   BFD_RELOC_IA64_SECREL64MSB
5415 ENUMX
5416   BFD_RELOC_IA64_SECREL64LSB
5417 ENUMX
5418   BFD_RELOC_IA64_REL32MSB
5419 ENUMX
5420   BFD_RELOC_IA64_REL32LSB
5421 ENUMX
5422   BFD_RELOC_IA64_REL64MSB
5423 ENUMX
5424   BFD_RELOC_IA64_REL64LSB
5425 ENUMX
5426   BFD_RELOC_IA64_LTV32MSB
5427 ENUMX
5428   BFD_RELOC_IA64_LTV32LSB
5429 ENUMX
5430   BFD_RELOC_IA64_LTV64MSB
5431 ENUMX
5432   BFD_RELOC_IA64_LTV64LSB
5433 ENUMX
5434   BFD_RELOC_IA64_IPLTMSB
5435 ENUMX
5436   BFD_RELOC_IA64_IPLTLSB
5437 ENUMX
5438   BFD_RELOC_IA64_COPY
5439 ENUMX
5440   BFD_RELOC_IA64_LTOFF22X
5441 ENUMX
5442   BFD_RELOC_IA64_LDXMOV
5443 ENUMX
5444   BFD_RELOC_IA64_TPREL14
5445 ENUMX
5446   BFD_RELOC_IA64_TPREL22
5447 ENUMX
5448   BFD_RELOC_IA64_TPREL64I
5449 ENUMX
5450   BFD_RELOC_IA64_TPREL64MSB
5451 ENUMX
5452   BFD_RELOC_IA64_TPREL64LSB
5453 ENUMX
5454   BFD_RELOC_IA64_LTOFF_TPREL22
5455 ENUMX
5456   BFD_RELOC_IA64_DTPMOD64MSB
5457 ENUMX
5458   BFD_RELOC_IA64_DTPMOD64LSB
5459 ENUMX
5460   BFD_RELOC_IA64_LTOFF_DTPMOD22
5461 ENUMX
5462   BFD_RELOC_IA64_DTPREL14
5463 ENUMX
5464   BFD_RELOC_IA64_DTPREL22
5465 ENUMX
5466   BFD_RELOC_IA64_DTPREL64I
5467 ENUMX
5468   BFD_RELOC_IA64_DTPREL32MSB
5469 ENUMX
5470   BFD_RELOC_IA64_DTPREL32LSB
5471 ENUMX
5472   BFD_RELOC_IA64_DTPREL64MSB
5473 ENUMX
5474   BFD_RELOC_IA64_DTPREL64LSB
5475 ENUMX
5476   BFD_RELOC_IA64_LTOFF_DTPREL22
5477 ENUMDOC
5478   Intel IA64 Relocations.
5479
5480 ENUM
5481   BFD_RELOC_M68HC11_HI8
5482 ENUMDOC
5483   Motorola 68HC11 reloc.
5484   This is the 8 bit high part of an absolute address.
5485 ENUM
5486   BFD_RELOC_M68HC11_LO8
5487 ENUMDOC
5488   Motorola 68HC11 reloc.
5489   This is the 8 bit low part of an absolute address.
5490 ENUM
5491   BFD_RELOC_M68HC11_3B
5492 ENUMDOC
5493   Motorola 68HC11 reloc.
5494   This is the 3 bit of a value.
5495 ENUM
5496   BFD_RELOC_M68HC11_RL_JUMP
5497 ENUMDOC
5498   Motorola 68HC11 reloc.
5499   This reloc marks the beginning of a jump/call instruction.
5500   It is used for linker relaxation to correctly identify beginning
5501   of instruction and change some branches to use PC-relative
5502   addressing mode.
5503 ENUM
5504   BFD_RELOC_M68HC11_RL_GROUP
5505 ENUMDOC
5506   Motorola 68HC11 reloc.
5507   This reloc marks a group of several instructions that gcc generates
5508   and for which the linker relaxation pass can modify and/or remove
5509   some of them.
5510 ENUM
5511   BFD_RELOC_M68HC11_LO16
5512 ENUMDOC
5513   Motorola 68HC11 reloc.
5514   This is the 16-bit lower part of an address.  It is used for 'call'
5515   instruction to specify the symbol address without any special
5516   transformation (due to memory bank window).
5517 ENUM
5518   BFD_RELOC_M68HC11_PAGE
5519 ENUMDOC
5520   Motorola 68HC11 reloc.
5521   This is a 8-bit reloc that specifies the page number of an address.
5522   It is used by 'call' instruction to specify the page number of
5523   the symbol.
5524 ENUM
5525   BFD_RELOC_M68HC11_24
5526 ENUMDOC
5527   Motorola 68HC11 reloc.
5528   This is a 24-bit reloc that represents the address with a 16-bit
5529   value and a 8-bit page number.  The symbol address is transformed
5530   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5531 ENUM
5532   BFD_RELOC_M68HC12_5B
5533 ENUMDOC
5534   Motorola 68HC12 reloc.
5535   This is the 5 bits of a value.
5536 ENUM
5537   BFD_RELOC_XGATE_RL_JUMP
5538 ENUMDOC
5539   Freescale XGATE reloc.
5540   This reloc marks the beginning of a bra/jal instruction.
5541 ENUM
5542   BFD_RELOC_XGATE_RL_GROUP
5543 ENUMDOC
5544   Freescale XGATE reloc.
5545   This reloc marks a group of several instructions that gcc generates
5546   and for which the linker relaxation pass can modify and/or remove
5547   some of them.
5548 ENUM
5549   BFD_RELOC_XGATE_LO16
5550 ENUMDOC
5551   Freescale XGATE reloc.
5552   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5553   instructions.
5554 ENUM
5555   BFD_RELOC_XGATE_GPAGE
5556 ENUMDOC
5557   Freescale XGATE reloc.
5558 ENUM
5559   BFD_RELOC_XGATE_24
5560 ENUMDOC
5561   Freescale XGATE reloc.
5562 ENUM
5563   BFD_RELOC_XGATE_PCREL_9
5564 ENUMDOC
5565   Freescale XGATE reloc.
5566   This is a 9-bit pc-relative reloc.
5567 ENUM
5568   BFD_RELOC_XGATE_PCREL_10
5569 ENUMDOC
5570   Freescale XGATE reloc.
5571   This is a 10-bit pc-relative reloc.
5572 ENUM
5573   BFD_RELOC_XGATE_IMM8_LO
5574 ENUMDOC
5575   Freescale XGATE reloc.
5576   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5577   instructions.
5578 ENUM
5579   BFD_RELOC_XGATE_IMM8_HI
5580 ENUMDOC
5581   Freescale XGATE reloc.
5582   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5583   instructions.
5584 ENUM
5585   BFD_RELOC_XGATE_IMM3
5586 ENUMDOC
5587   Freescale XGATE reloc.
5588   This is a 3-bit pc-relative reloc.
5589 ENUM
5590   BFD_RELOC_XGATE_IMM4
5591 ENUMDOC
5592   Freescale XGATE reloc.
5593   This is a 4-bit pc-relative reloc.
5594 ENUM
5595   BFD_RELOC_XGATE_IMM5
5596 ENUMDOC
5597   Freescale XGATE reloc.
5598   This is a 5-bit pc-relative reloc.
5599 ENUM
5600   BFD_RELOC_M68HC12_9B
5601 ENUMDOC
5602   Motorola 68HC12 reloc.
5603   This is the 9 bits of a value.
5604 ENUM
5605   BFD_RELOC_M68HC12_16B
5606 ENUMDOC
5607   Motorola 68HC12 reloc.
5608   This is the 16 bits of a value.
5609 ENUM
5610   BFD_RELOC_M68HC12_9_PCREL
5611 ENUMDOC
5612   Motorola 68HC12/XGATE reloc.
5613   This is a PCREL9 branch.
5614 ENUM
5615   BFD_RELOC_M68HC12_10_PCREL
5616 ENUMDOC
5617   Motorola 68HC12/XGATE reloc.
5618   This is a PCREL10 branch.
5619 ENUM
5620   BFD_RELOC_M68HC12_LO8XG
5621 ENUMDOC
5622   Motorola 68HC12/XGATE reloc.
5623   This is the 8 bit low part of an absolute address and immediately precedes
5624   a matching HI8XG part.
5625 ENUM
5626   BFD_RELOC_M68HC12_HI8XG
5627 ENUMDOC
5628   Motorola 68HC12/XGATE reloc.
5629   This is the 8 bit high part of an absolute address and immediately follows
5630   a matching LO8XG part.
5631 ENUM
5632   BFD_RELOC_16C_NUM08
5633 ENUMX
5634   BFD_RELOC_16C_NUM08_C
5635 ENUMX
5636   BFD_RELOC_16C_NUM16
5637 ENUMX
5638   BFD_RELOC_16C_NUM16_C
5639 ENUMX
5640   BFD_RELOC_16C_NUM32
5641 ENUMX
5642   BFD_RELOC_16C_NUM32_C
5643 ENUMX
5644   BFD_RELOC_16C_DISP04
5645 ENUMX
5646   BFD_RELOC_16C_DISP04_C
5647 ENUMX
5648   BFD_RELOC_16C_DISP08
5649 ENUMX
5650   BFD_RELOC_16C_DISP08_C
5651 ENUMX
5652   BFD_RELOC_16C_DISP16
5653 ENUMX
5654   BFD_RELOC_16C_DISP16_C
5655 ENUMX
5656   BFD_RELOC_16C_DISP24
5657 ENUMX
5658   BFD_RELOC_16C_DISP24_C
5659 ENUMX
5660   BFD_RELOC_16C_DISP24a
5661 ENUMX
5662   BFD_RELOC_16C_DISP24a_C
5663 ENUMX
5664   BFD_RELOC_16C_REG04
5665 ENUMX
5666   BFD_RELOC_16C_REG04_C
5667 ENUMX
5668   BFD_RELOC_16C_REG04a
5669 ENUMX
5670   BFD_RELOC_16C_REG04a_C
5671 ENUMX
5672   BFD_RELOC_16C_REG14
5673 ENUMX
5674   BFD_RELOC_16C_REG14_C
5675 ENUMX
5676   BFD_RELOC_16C_REG16
5677 ENUMX
5678   BFD_RELOC_16C_REG16_C
5679 ENUMX
5680   BFD_RELOC_16C_REG20
5681 ENUMX
5682   BFD_RELOC_16C_REG20_C
5683 ENUMX
5684   BFD_RELOC_16C_ABS20
5685 ENUMX
5686   BFD_RELOC_16C_ABS20_C
5687 ENUMX
5688   BFD_RELOC_16C_ABS24
5689 ENUMX
5690   BFD_RELOC_16C_ABS24_C
5691 ENUMX
5692   BFD_RELOC_16C_IMM04
5693 ENUMX
5694   BFD_RELOC_16C_IMM04_C
5695 ENUMX
5696   BFD_RELOC_16C_IMM16
5697 ENUMX
5698   BFD_RELOC_16C_IMM16_C
5699 ENUMX
5700   BFD_RELOC_16C_IMM20
5701 ENUMX
5702   BFD_RELOC_16C_IMM20_C
5703 ENUMX
5704   BFD_RELOC_16C_IMM24
5705 ENUMX
5706   BFD_RELOC_16C_IMM24_C
5707 ENUMX
5708   BFD_RELOC_16C_IMM32
5709 ENUMX
5710   BFD_RELOC_16C_IMM32_C
5711 ENUMDOC
5712   NS CR16C Relocations.
5713
5714 ENUM
5715   BFD_RELOC_CR16_NUM8
5716 ENUMX
5717   BFD_RELOC_CR16_NUM16
5718 ENUMX
5719   BFD_RELOC_CR16_NUM32
5720 ENUMX
5721   BFD_RELOC_CR16_NUM32a
5722 ENUMX
5723   BFD_RELOC_CR16_REGREL0
5724 ENUMX
5725   BFD_RELOC_CR16_REGREL4
5726 ENUMX
5727   BFD_RELOC_CR16_REGREL4a
5728 ENUMX
5729   BFD_RELOC_CR16_REGREL14
5730 ENUMX
5731   BFD_RELOC_CR16_REGREL14a
5732 ENUMX
5733   BFD_RELOC_CR16_REGREL16
5734 ENUMX
5735   BFD_RELOC_CR16_REGREL20
5736 ENUMX
5737   BFD_RELOC_CR16_REGREL20a
5738 ENUMX
5739   BFD_RELOC_CR16_ABS20
5740 ENUMX
5741   BFD_RELOC_CR16_ABS24
5742 ENUMX
5743   BFD_RELOC_CR16_IMM4
5744 ENUMX
5745   BFD_RELOC_CR16_IMM8
5746 ENUMX
5747   BFD_RELOC_CR16_IMM16
5748 ENUMX
5749   BFD_RELOC_CR16_IMM20
5750 ENUMX
5751   BFD_RELOC_CR16_IMM24
5752 ENUMX
5753   BFD_RELOC_CR16_IMM32
5754 ENUMX
5755   BFD_RELOC_CR16_IMM32a
5756 ENUMX
5757   BFD_RELOC_CR16_DISP4
5758 ENUMX
5759   BFD_RELOC_CR16_DISP8
5760 ENUMX
5761   BFD_RELOC_CR16_DISP16
5762 ENUMX
5763   BFD_RELOC_CR16_DISP20
5764 ENUMX
5765   BFD_RELOC_CR16_DISP24
5766 ENUMX
5767   BFD_RELOC_CR16_DISP24a
5768 ENUMX
5769   BFD_RELOC_CR16_SWITCH8
5770 ENUMX
5771   BFD_RELOC_CR16_SWITCH16
5772 ENUMX
5773   BFD_RELOC_CR16_SWITCH32
5774 ENUMX
5775   BFD_RELOC_CR16_GOT_REGREL20
5776 ENUMX
5777   BFD_RELOC_CR16_GOTC_REGREL20
5778 ENUMX
5779   BFD_RELOC_CR16_GLOB_DAT
5780 ENUMDOC
5781   NS CR16 Relocations.
5782
5783 ENUM
5784   BFD_RELOC_CRX_REL4
5785 ENUMX
5786   BFD_RELOC_CRX_REL8
5787 ENUMX
5788   BFD_RELOC_CRX_REL8_CMP
5789 ENUMX
5790   BFD_RELOC_CRX_REL16
5791 ENUMX
5792   BFD_RELOC_CRX_REL24
5793 ENUMX
5794   BFD_RELOC_CRX_REL32
5795 ENUMX
5796   BFD_RELOC_CRX_REGREL12
5797 ENUMX
5798   BFD_RELOC_CRX_REGREL22
5799 ENUMX
5800   BFD_RELOC_CRX_REGREL28
5801 ENUMX
5802   BFD_RELOC_CRX_REGREL32
5803 ENUMX
5804   BFD_RELOC_CRX_ABS16
5805 ENUMX
5806   BFD_RELOC_CRX_ABS32
5807 ENUMX
5808   BFD_RELOC_CRX_NUM8
5809 ENUMX
5810   BFD_RELOC_CRX_NUM16
5811 ENUMX
5812   BFD_RELOC_CRX_NUM32
5813 ENUMX
5814   BFD_RELOC_CRX_IMM16
5815 ENUMX
5816   BFD_RELOC_CRX_IMM32
5817 ENUMX
5818   BFD_RELOC_CRX_SWITCH8
5819 ENUMX
5820   BFD_RELOC_CRX_SWITCH16
5821 ENUMX
5822   BFD_RELOC_CRX_SWITCH32
5823 ENUMDOC
5824   NS CRX Relocations.
5825
5826 ENUM
5827   BFD_RELOC_CRIS_BDISP8
5828 ENUMX
5829   BFD_RELOC_CRIS_UNSIGNED_5
5830 ENUMX
5831   BFD_RELOC_CRIS_SIGNED_6
5832 ENUMX
5833   BFD_RELOC_CRIS_UNSIGNED_6
5834 ENUMX
5835   BFD_RELOC_CRIS_SIGNED_8
5836 ENUMX
5837   BFD_RELOC_CRIS_UNSIGNED_8
5838 ENUMX
5839   BFD_RELOC_CRIS_SIGNED_16
5840 ENUMX
5841   BFD_RELOC_CRIS_UNSIGNED_16
5842 ENUMX
5843   BFD_RELOC_CRIS_LAPCQ_OFFSET
5844 ENUMX
5845   BFD_RELOC_CRIS_UNSIGNED_4
5846 ENUMDOC
5847   These relocs are only used within the CRIS assembler.  They are not
5848   (at present) written to any object files.
5849 ENUM
5850   BFD_RELOC_CRIS_COPY
5851 ENUMX
5852   BFD_RELOC_CRIS_GLOB_DAT
5853 ENUMX
5854   BFD_RELOC_CRIS_JUMP_SLOT
5855 ENUMX
5856   BFD_RELOC_CRIS_RELATIVE
5857 ENUMDOC
5858   Relocs used in ELF shared libraries for CRIS.
5859 ENUM
5860   BFD_RELOC_CRIS_32_GOT
5861 ENUMDOC
5862   32-bit offset to symbol-entry within GOT.
5863 ENUM
5864   BFD_RELOC_CRIS_16_GOT
5865 ENUMDOC
5866   16-bit offset to symbol-entry within GOT.
5867 ENUM
5868   BFD_RELOC_CRIS_32_GOTPLT
5869 ENUMDOC
5870   32-bit offset to symbol-entry within GOT, with PLT handling.
5871 ENUM
5872   BFD_RELOC_CRIS_16_GOTPLT
5873 ENUMDOC
5874   16-bit offset to symbol-entry within GOT, with PLT handling.
5875 ENUM
5876   BFD_RELOC_CRIS_32_GOTREL
5877 ENUMDOC
5878   32-bit offset to symbol, relative to GOT.
5879 ENUM
5880   BFD_RELOC_CRIS_32_PLT_GOTREL
5881 ENUMDOC
5882   32-bit offset to symbol with PLT entry, relative to GOT.
5883 ENUM
5884   BFD_RELOC_CRIS_32_PLT_PCREL
5885 ENUMDOC
5886   32-bit offset to symbol with PLT entry, relative to this relocation.
5887
5888 ENUM
5889   BFD_RELOC_CRIS_32_GOT_GD
5890 ENUMX
5891   BFD_RELOC_CRIS_16_GOT_GD
5892 ENUMX
5893   BFD_RELOC_CRIS_32_GD
5894 ENUMX
5895   BFD_RELOC_CRIS_DTP
5896 ENUMX
5897   BFD_RELOC_CRIS_32_DTPREL
5898 ENUMX
5899   BFD_RELOC_CRIS_16_DTPREL
5900 ENUMX
5901   BFD_RELOC_CRIS_32_GOT_TPREL
5902 ENUMX
5903   BFD_RELOC_CRIS_16_GOT_TPREL
5904 ENUMX
5905   BFD_RELOC_CRIS_32_TPREL
5906 ENUMX
5907   BFD_RELOC_CRIS_16_TPREL
5908 ENUMX
5909   BFD_RELOC_CRIS_DTPMOD
5910 ENUMX
5911   BFD_RELOC_CRIS_32_IE
5912 ENUMDOC
5913   Relocs used in TLS code for CRIS.
5914
5915 ENUM
5916   BFD_RELOC_860_COPY
5917 ENUMX
5918   BFD_RELOC_860_GLOB_DAT
5919 ENUMX
5920   BFD_RELOC_860_JUMP_SLOT
5921 ENUMX
5922   BFD_RELOC_860_RELATIVE
5923 ENUMX
5924   BFD_RELOC_860_PC26
5925 ENUMX
5926   BFD_RELOC_860_PLT26
5927 ENUMX
5928   BFD_RELOC_860_PC16
5929 ENUMX
5930   BFD_RELOC_860_LOW0
5931 ENUMX
5932   BFD_RELOC_860_SPLIT0
5933 ENUMX
5934   BFD_RELOC_860_LOW1
5935 ENUMX
5936   BFD_RELOC_860_SPLIT1
5937 ENUMX
5938   BFD_RELOC_860_LOW2
5939 ENUMX
5940   BFD_RELOC_860_SPLIT2
5941 ENUMX
5942   BFD_RELOC_860_LOW3
5943 ENUMX
5944   BFD_RELOC_860_LOGOT0
5945 ENUMX
5946   BFD_RELOC_860_SPGOT0
5947 ENUMX
5948   BFD_RELOC_860_LOGOT1
5949 ENUMX
5950   BFD_RELOC_860_SPGOT1
5951 ENUMX
5952   BFD_RELOC_860_LOGOTOFF0
5953 ENUMX
5954   BFD_RELOC_860_SPGOTOFF0
5955 ENUMX
5956   BFD_RELOC_860_LOGOTOFF1
5957 ENUMX
5958   BFD_RELOC_860_SPGOTOFF1
5959 ENUMX
5960   BFD_RELOC_860_LOGOTOFF2
5961 ENUMX
5962   BFD_RELOC_860_LOGOTOFF3
5963 ENUMX
5964   BFD_RELOC_860_LOPC
5965 ENUMX
5966   BFD_RELOC_860_HIGHADJ
5967 ENUMX
5968   BFD_RELOC_860_HAGOT
5969 ENUMX
5970   BFD_RELOC_860_HAGOTOFF
5971 ENUMX
5972   BFD_RELOC_860_HAPC
5973 ENUMX
5974   BFD_RELOC_860_HIGH
5975 ENUMX
5976   BFD_RELOC_860_HIGOT
5977 ENUMX
5978   BFD_RELOC_860_HIGOTOFF
5979 ENUMDOC
5980   Intel i860 Relocations.
5981
5982 ENUM
5983   BFD_RELOC_OR1K_REL_26
5984 ENUMX
5985   BFD_RELOC_OR1K_GOTPC_HI16
5986 ENUMX
5987   BFD_RELOC_OR1K_GOTPC_LO16
5988 ENUMX
5989   BFD_RELOC_OR1K_GOT16
5990 ENUMX
5991   BFD_RELOC_OR1K_PLT26
5992 ENUMX
5993   BFD_RELOC_OR1K_GOTOFF_HI16
5994 ENUMX
5995   BFD_RELOC_OR1K_GOTOFF_LO16
5996 ENUMX
5997   BFD_RELOC_OR1K_COPY
5998 ENUMX
5999   BFD_RELOC_OR1K_GLOB_DAT
6000 ENUMX
6001   BFD_RELOC_OR1K_JMP_SLOT
6002 ENUMX
6003   BFD_RELOC_OR1K_RELATIVE
6004 ENUMX
6005   BFD_RELOC_OR1K_TLS_GD_HI16
6006 ENUMX
6007   BFD_RELOC_OR1K_TLS_GD_LO16
6008 ENUMX
6009   BFD_RELOC_OR1K_TLS_LDM_HI16
6010 ENUMX
6011   BFD_RELOC_OR1K_TLS_LDM_LO16
6012 ENUMX
6013   BFD_RELOC_OR1K_TLS_LDO_HI16
6014 ENUMX
6015   BFD_RELOC_OR1K_TLS_LDO_LO16
6016 ENUMX
6017   BFD_RELOC_OR1K_TLS_IE_HI16
6018 ENUMX
6019   BFD_RELOC_OR1K_TLS_IE_LO16
6020 ENUMX
6021   BFD_RELOC_OR1K_TLS_LE_HI16
6022 ENUMX
6023   BFD_RELOC_OR1K_TLS_LE_LO16
6024 ENUMX
6025   BFD_RELOC_OR1K_TLS_TPOFF
6026 ENUMX
6027   BFD_RELOC_OR1K_TLS_DTPOFF
6028 ENUMX
6029   BFD_RELOC_OR1K_TLS_DTPMOD
6030 ENUMDOC
6031   OpenRISC 1000 Relocations.
6032
6033 ENUM
6034   BFD_RELOC_H8_DIR16A8
6035 ENUMX
6036   BFD_RELOC_H8_DIR16R8
6037 ENUMX
6038   BFD_RELOC_H8_DIR24A8
6039 ENUMX
6040   BFD_RELOC_H8_DIR24R8
6041 ENUMX
6042   BFD_RELOC_H8_DIR32A16
6043 ENUMX
6044   BFD_RELOC_H8_DISP32A16
6045 ENUMDOC
6046   H8 elf Relocations.
6047
6048 ENUM
6049   BFD_RELOC_XSTORMY16_REL_12
6050 ENUMX
6051   BFD_RELOC_XSTORMY16_12
6052 ENUMX
6053   BFD_RELOC_XSTORMY16_24
6054 ENUMX
6055   BFD_RELOC_XSTORMY16_FPTR16
6056 ENUMDOC
6057   Sony Xstormy16 Relocations.
6058
6059 ENUM
6060   BFD_RELOC_RELC
6061 ENUMDOC
6062   Self-describing complex relocations.
6063 COMMENT
6064
6065 ENUM
6066   BFD_RELOC_XC16X_PAG
6067 ENUMX
6068   BFD_RELOC_XC16X_POF
6069 ENUMX
6070   BFD_RELOC_XC16X_SEG
6071 ENUMX
6072   BFD_RELOC_XC16X_SOF
6073 ENUMDOC
6074   Infineon Relocations.
6075
6076 ENUM
6077   BFD_RELOC_VAX_GLOB_DAT
6078 ENUMX
6079   BFD_RELOC_VAX_JMP_SLOT
6080 ENUMX
6081   BFD_RELOC_VAX_RELATIVE
6082 ENUMDOC
6083   Relocations used by VAX ELF.
6084
6085 ENUM
6086   BFD_RELOC_MT_PC16
6087 ENUMDOC
6088   Morpho MT - 16 bit immediate relocation.
6089 ENUM
6090   BFD_RELOC_MT_HI16
6091 ENUMDOC
6092   Morpho MT - Hi 16 bits of an address.
6093 ENUM
6094   BFD_RELOC_MT_LO16
6095 ENUMDOC
6096   Morpho MT - Low 16 bits of an address.
6097 ENUM
6098   BFD_RELOC_MT_GNU_VTINHERIT
6099 ENUMDOC
6100   Morpho MT - Used to tell the linker which vtable entries are used.
6101 ENUM
6102   BFD_RELOC_MT_GNU_VTENTRY
6103 ENUMDOC
6104   Morpho MT - Used to tell the linker which vtable entries are used.
6105 ENUM
6106   BFD_RELOC_MT_PCINSN8
6107 ENUMDOC
6108   Morpho MT - 8 bit immediate relocation.
6109
6110 ENUM
6111   BFD_RELOC_MSP430_10_PCREL
6112 ENUMX
6113   BFD_RELOC_MSP430_16_PCREL
6114 ENUMX
6115   BFD_RELOC_MSP430_16
6116 ENUMX
6117   BFD_RELOC_MSP430_16_PCREL_BYTE
6118 ENUMX
6119   BFD_RELOC_MSP430_16_BYTE
6120 ENUMX
6121   BFD_RELOC_MSP430_2X_PCREL
6122 ENUMX
6123   BFD_RELOC_MSP430_RL_PCREL
6124 ENUMX
6125   BFD_RELOC_MSP430_ABS8
6126 ENUMX
6127   BFD_RELOC_MSP430X_PCR20_EXT_SRC
6128 ENUMX
6129   BFD_RELOC_MSP430X_PCR20_EXT_DST
6130 ENUMX
6131   BFD_RELOC_MSP430X_PCR20_EXT_ODST
6132 ENUMX
6133   BFD_RELOC_MSP430X_ABS20_EXT_SRC
6134 ENUMX
6135   BFD_RELOC_MSP430X_ABS20_EXT_DST
6136 ENUMX
6137   BFD_RELOC_MSP430X_ABS20_EXT_ODST
6138 ENUMX
6139   BFD_RELOC_MSP430X_ABS20_ADR_SRC
6140 ENUMX
6141   BFD_RELOC_MSP430X_ABS20_ADR_DST
6142 ENUMX
6143   BFD_RELOC_MSP430X_PCR16
6144 ENUMX
6145   BFD_RELOC_MSP430X_PCR20_CALL
6146 ENUMX
6147   BFD_RELOC_MSP430X_ABS16
6148 ENUMX
6149   BFD_RELOC_MSP430_ABS_HI16
6150 ENUMX
6151   BFD_RELOC_MSP430_PREL31
6152 ENUMX
6153   BFD_RELOC_MSP430_SYM_DIFF
6154 ENUMDOC
6155   msp430 specific relocation codes
6156
6157 ENUM
6158   BFD_RELOC_NIOS2_S16
6159 ENUMX
6160   BFD_RELOC_NIOS2_U16
6161 ENUMX
6162   BFD_RELOC_NIOS2_CALL26
6163 ENUMX
6164   BFD_RELOC_NIOS2_IMM5
6165 ENUMX
6166   BFD_RELOC_NIOS2_CACHE_OPX
6167 ENUMX
6168   BFD_RELOC_NIOS2_IMM6
6169 ENUMX
6170   BFD_RELOC_NIOS2_IMM8
6171 ENUMX
6172   BFD_RELOC_NIOS2_HI16
6173 ENUMX
6174   BFD_RELOC_NIOS2_LO16
6175 ENUMX
6176   BFD_RELOC_NIOS2_HIADJ16
6177 ENUMX
6178   BFD_RELOC_NIOS2_GPREL
6179 ENUMX
6180   BFD_RELOC_NIOS2_UJMP
6181 ENUMX
6182   BFD_RELOC_NIOS2_CJMP
6183 ENUMX
6184   BFD_RELOC_NIOS2_CALLR
6185 ENUMX
6186   BFD_RELOC_NIOS2_ALIGN
6187 ENUMX
6188   BFD_RELOC_NIOS2_GOT16
6189 ENUMX
6190   BFD_RELOC_NIOS2_CALL16
6191 ENUMX
6192   BFD_RELOC_NIOS2_GOTOFF_LO
6193 ENUMX
6194   BFD_RELOC_NIOS2_GOTOFF_HA
6195 ENUMX
6196   BFD_RELOC_NIOS2_PCREL_LO
6197 ENUMX
6198   BFD_RELOC_NIOS2_PCREL_HA
6199 ENUMX
6200   BFD_RELOC_NIOS2_TLS_GD16
6201 ENUMX
6202   BFD_RELOC_NIOS2_TLS_LDM16
6203 ENUMX
6204   BFD_RELOC_NIOS2_TLS_LDO16
6205 ENUMX
6206   BFD_RELOC_NIOS2_TLS_IE16
6207 ENUMX
6208   BFD_RELOC_NIOS2_TLS_LE16
6209 ENUMX
6210   BFD_RELOC_NIOS2_TLS_DTPMOD
6211 ENUMX
6212   BFD_RELOC_NIOS2_TLS_DTPREL
6213 ENUMX
6214   BFD_RELOC_NIOS2_TLS_TPREL
6215 ENUMX
6216   BFD_RELOC_NIOS2_COPY
6217 ENUMX
6218   BFD_RELOC_NIOS2_GLOB_DAT
6219 ENUMX
6220   BFD_RELOC_NIOS2_JUMP_SLOT
6221 ENUMX
6222   BFD_RELOC_NIOS2_RELATIVE
6223 ENUMX
6224   BFD_RELOC_NIOS2_GOTOFF
6225 ENUMX
6226   BFD_RELOC_NIOS2_CALL26_NOAT
6227 ENUMX
6228   BFD_RELOC_NIOS2_GOT_LO
6229 ENUMX
6230   BFD_RELOC_NIOS2_GOT_HA
6231 ENUMX
6232   BFD_RELOC_NIOS2_CALL_LO
6233 ENUMX
6234   BFD_RELOC_NIOS2_CALL_HA
6235 ENUMX
6236   BFD_RELOC_NIOS2_R2_S12
6237 ENUMX
6238   BFD_RELOC_NIOS2_R2_I10_1_PCREL
6239 ENUMX
6240   BFD_RELOC_NIOS2_R2_T1I7_1_PCREL
6241 ENUMX
6242   BFD_RELOC_NIOS2_R2_T1I7_2
6243 ENUMX
6244   BFD_RELOC_NIOS2_R2_T2I4
6245 ENUMX
6246   BFD_RELOC_NIOS2_R2_T2I4_1
6247 ENUMX
6248   BFD_RELOC_NIOS2_R2_T2I4_2
6249 ENUMX
6250   BFD_RELOC_NIOS2_R2_X1I7_2
6251 ENUMX
6252   BFD_RELOC_NIOS2_R2_X2L5
6253 ENUMX
6254   BFD_RELOC_NIOS2_R2_F1I5_2
6255 ENUMX
6256   BFD_RELOC_NIOS2_R2_L5I4X1
6257 ENUMX
6258   BFD_RELOC_NIOS2_R2_T1X1I6
6259 ENUMX
6260   BFD_RELOC_NIOS2_R2_T1X1I6_2
6261 ENUMDOC
6262   Relocations used by the Altera Nios II core.
6263
6264 ENUM
6265   BFD_RELOC_IQ2000_OFFSET_16
6266 ENUMX
6267   BFD_RELOC_IQ2000_OFFSET_21
6268 ENUMX
6269   BFD_RELOC_IQ2000_UHI16
6270 ENUMDOC
6271   IQ2000 Relocations.
6272
6273 ENUM
6274   BFD_RELOC_XTENSA_RTLD
6275 ENUMDOC
6276   Special Xtensa relocation used only by PLT entries in ELF shared
6277   objects to indicate that the runtime linker should set the value
6278   to one of its own internal functions or data structures.
6279 ENUM
6280   BFD_RELOC_XTENSA_GLOB_DAT
6281 ENUMX
6282   BFD_RELOC_XTENSA_JMP_SLOT
6283 ENUMX
6284   BFD_RELOC_XTENSA_RELATIVE
6285 ENUMDOC
6286   Xtensa relocations for ELF shared objects.
6287 ENUM
6288   BFD_RELOC_XTENSA_PLT
6289 ENUMDOC
6290   Xtensa relocation used in ELF object files for symbols that may require
6291   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
6292 ENUM
6293   BFD_RELOC_XTENSA_DIFF8
6294 ENUMX
6295   BFD_RELOC_XTENSA_DIFF16
6296 ENUMX
6297   BFD_RELOC_XTENSA_DIFF32
6298 ENUMDOC
6299   Xtensa relocations to mark the difference of two local symbols.
6300   These are only needed to support linker relaxation and can be ignored
6301   when not relaxing.  The field is set to the value of the difference
6302   assuming no relaxation.  The relocation encodes the position of the
6303   first symbol so the linker can determine whether to adjust the field
6304   value.
6305 ENUM
6306   BFD_RELOC_XTENSA_SLOT0_OP
6307 ENUMX
6308   BFD_RELOC_XTENSA_SLOT1_OP
6309 ENUMX
6310   BFD_RELOC_XTENSA_SLOT2_OP
6311 ENUMX
6312   BFD_RELOC_XTENSA_SLOT3_OP
6313 ENUMX
6314   BFD_RELOC_XTENSA_SLOT4_OP
6315 ENUMX
6316   BFD_RELOC_XTENSA_SLOT5_OP
6317 ENUMX
6318   BFD_RELOC_XTENSA_SLOT6_OP
6319 ENUMX
6320   BFD_RELOC_XTENSA_SLOT7_OP
6321 ENUMX
6322   BFD_RELOC_XTENSA_SLOT8_OP
6323 ENUMX
6324   BFD_RELOC_XTENSA_SLOT9_OP
6325 ENUMX
6326   BFD_RELOC_XTENSA_SLOT10_OP
6327 ENUMX
6328   BFD_RELOC_XTENSA_SLOT11_OP
6329 ENUMX
6330   BFD_RELOC_XTENSA_SLOT12_OP
6331 ENUMX
6332   BFD_RELOC_XTENSA_SLOT13_OP
6333 ENUMX
6334   BFD_RELOC_XTENSA_SLOT14_OP
6335 ENUMDOC
6336   Generic Xtensa relocations for instruction operands.  Only the slot
6337   number is encoded in the relocation.  The relocation applies to the
6338   last PC-relative immediate operand, or if there are no PC-relative
6339   immediates, to the last immediate operand.
6340 ENUM
6341   BFD_RELOC_XTENSA_SLOT0_ALT
6342 ENUMX
6343   BFD_RELOC_XTENSA_SLOT1_ALT
6344 ENUMX
6345   BFD_RELOC_XTENSA_SLOT2_ALT
6346 ENUMX
6347   BFD_RELOC_XTENSA_SLOT3_ALT
6348 ENUMX
6349   BFD_RELOC_XTENSA_SLOT4_ALT
6350 ENUMX
6351   BFD_RELOC_XTENSA_SLOT5_ALT
6352 ENUMX
6353   BFD_RELOC_XTENSA_SLOT6_ALT
6354 ENUMX
6355   BFD_RELOC_XTENSA_SLOT7_ALT
6356 ENUMX
6357   BFD_RELOC_XTENSA_SLOT8_ALT
6358 ENUMX
6359   BFD_RELOC_XTENSA_SLOT9_ALT
6360 ENUMX
6361   BFD_RELOC_XTENSA_SLOT10_ALT
6362 ENUMX
6363   BFD_RELOC_XTENSA_SLOT11_ALT
6364 ENUMX
6365   BFD_RELOC_XTENSA_SLOT12_ALT
6366 ENUMX
6367   BFD_RELOC_XTENSA_SLOT13_ALT
6368 ENUMX
6369   BFD_RELOC_XTENSA_SLOT14_ALT
6370 ENUMDOC
6371   Alternate Xtensa relocations.  Only the slot is encoded in the
6372   relocation.  The meaning of these relocations is opcode-specific.
6373 ENUM
6374   BFD_RELOC_XTENSA_OP0
6375 ENUMX
6376   BFD_RELOC_XTENSA_OP1
6377 ENUMX
6378   BFD_RELOC_XTENSA_OP2
6379 ENUMDOC
6380   Xtensa relocations for backward compatibility.  These have all been
6381   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6382 ENUM
6383   BFD_RELOC_XTENSA_ASM_EXPAND
6384 ENUMDOC
6385   Xtensa relocation to mark that the assembler expanded the
6386   instructions from an original target.  The expansion size is
6387   encoded in the reloc size.
6388 ENUM
6389   BFD_RELOC_XTENSA_ASM_SIMPLIFY
6390 ENUMDOC
6391   Xtensa relocation to mark that the linker should simplify
6392   assembler-expanded instructions.  This is commonly used
6393   internally by the linker after analysis of a
6394   BFD_RELOC_XTENSA_ASM_EXPAND.
6395 ENUM
6396   BFD_RELOC_XTENSA_TLSDESC_FN
6397 ENUMX
6398   BFD_RELOC_XTENSA_TLSDESC_ARG
6399 ENUMX
6400   BFD_RELOC_XTENSA_TLS_DTPOFF
6401 ENUMX
6402   BFD_RELOC_XTENSA_TLS_TPOFF
6403 ENUMX
6404   BFD_RELOC_XTENSA_TLS_FUNC
6405 ENUMX
6406   BFD_RELOC_XTENSA_TLS_ARG
6407 ENUMX
6408   BFD_RELOC_XTENSA_TLS_CALL
6409 ENUMDOC
6410   Xtensa TLS relocations.
6411
6412 ENUM
6413   BFD_RELOC_Z80_DISP8
6414 ENUMDOC
6415   8 bit signed offset in (ix+d) or (iy+d).
6416
6417 ENUM
6418   BFD_RELOC_Z8K_DISP7
6419 ENUMDOC
6420   DJNZ offset.
6421 ENUM
6422   BFD_RELOC_Z8K_CALLR
6423 ENUMDOC
6424   CALR offset.
6425 ENUM
6426   BFD_RELOC_Z8K_IMM4L
6427 ENUMDOC
6428   4 bit value.
6429
6430 ENUM
6431    BFD_RELOC_LM32_CALL
6432 ENUMX
6433    BFD_RELOC_LM32_BRANCH
6434 ENUMX
6435    BFD_RELOC_LM32_16_GOT
6436 ENUMX
6437    BFD_RELOC_LM32_GOTOFF_HI16
6438 ENUMX
6439    BFD_RELOC_LM32_GOTOFF_LO16
6440 ENUMX
6441    BFD_RELOC_LM32_COPY
6442 ENUMX
6443    BFD_RELOC_LM32_GLOB_DAT
6444 ENUMX
6445    BFD_RELOC_LM32_JMP_SLOT
6446 ENUMX
6447    BFD_RELOC_LM32_RELATIVE
6448 ENUMDOC
6449  Lattice Mico32 relocations.
6450
6451 ENUM
6452   BFD_RELOC_MACH_O_SECTDIFF
6453 ENUMDOC
6454   Difference between two section addreses.  Must be followed by a
6455   BFD_RELOC_MACH_O_PAIR.
6456 ENUM
6457   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6458 ENUMDOC
6459   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6460 ENUM
6461   BFD_RELOC_MACH_O_PAIR
6462 ENUMDOC
6463   Pair of relocation.  Contains the first symbol.
6464
6465 ENUM
6466   BFD_RELOC_MACH_O_X86_64_BRANCH32
6467 ENUMX
6468   BFD_RELOC_MACH_O_X86_64_BRANCH8
6469 ENUMDOC
6470   PCREL relocations.  They are marked as branch to create PLT entry if
6471   required.
6472 ENUM
6473   BFD_RELOC_MACH_O_X86_64_GOT
6474 ENUMDOC
6475   Used when referencing a GOT entry.
6476 ENUM
6477   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6478 ENUMDOC
6479   Used when loading a GOT entry with movq.  It is specially marked so that
6480   the linker could optimize the movq to a leaq if possible.
6481 ENUM
6482   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
6483 ENUMDOC
6484   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6485 ENUM
6486   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
6487 ENUMDOC
6488   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6489 ENUM
6490   BFD_RELOC_MACH_O_X86_64_PCREL32_1
6491 ENUMDOC
6492   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6493 ENUM
6494   BFD_RELOC_MACH_O_X86_64_PCREL32_2
6495 ENUMDOC
6496   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6497 ENUM
6498   BFD_RELOC_MACH_O_X86_64_PCREL32_4
6499 ENUMDOC
6500   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6501
6502 ENUM
6503   BFD_RELOC_MICROBLAZE_32_LO
6504 ENUMDOC
6505   This is a 32 bit reloc for the microblaze that stores the
6506   low 16 bits of a value
6507 ENUM
6508   BFD_RELOC_MICROBLAZE_32_LO_PCREL
6509 ENUMDOC
6510   This is a 32 bit pc-relative reloc for the microblaze that
6511   stores the low 16 bits of a value
6512 ENUM
6513   BFD_RELOC_MICROBLAZE_32_ROSDA
6514 ENUMDOC
6515   This is a 32 bit reloc for the microblaze that stores a
6516   value relative to the read-only small data area anchor
6517 ENUM
6518   BFD_RELOC_MICROBLAZE_32_RWSDA
6519 ENUMDOC
6520   This is a 32 bit reloc for the microblaze that stores a
6521   value relative to the read-write small data area anchor
6522 ENUM
6523   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6524 ENUMDOC
6525   This is a 32 bit reloc for the microblaze to handle
6526   expressions of the form "Symbol Op Symbol"
6527 ENUM
6528   BFD_RELOC_MICROBLAZE_64_NONE
6529 ENUMDOC
6530   This is a 64 bit reloc that stores the 32 bit pc relative
6531   value in two words (with an imm instruction).  No relocation is
6532   done here - only used for relaxing
6533 ENUM
6534   BFD_RELOC_MICROBLAZE_64_GOTPC
6535 ENUMDOC
6536   This is a 64 bit reloc that stores the 32 bit pc relative
6537   value in two words (with an imm instruction).  The relocation is
6538   PC-relative GOT offset
6539 ENUM
6540   BFD_RELOC_MICROBLAZE_64_GOT
6541 ENUMDOC
6542   This is a 64 bit reloc that stores the 32 bit pc relative
6543   value in two words (with an imm instruction).  The relocation is
6544   GOT offset
6545 ENUM
6546   BFD_RELOC_MICROBLAZE_64_PLT
6547 ENUMDOC
6548   This is a 64 bit reloc that stores the 32 bit pc relative
6549   value in two words (with an imm instruction).  The relocation is
6550   PC-relative offset into PLT
6551 ENUM
6552   BFD_RELOC_MICROBLAZE_64_GOTOFF
6553 ENUMDOC
6554   This is a 64 bit reloc that stores the 32 bit GOT relative
6555   value in two words (with an imm instruction).  The relocation is
6556   relative offset from _GLOBAL_OFFSET_TABLE_
6557 ENUM
6558   BFD_RELOC_MICROBLAZE_32_GOTOFF
6559 ENUMDOC
6560   This is a 32 bit reloc that stores the 32 bit GOT relative
6561   value in a word.  The relocation is relative offset from
6562   _GLOBAL_OFFSET_TABLE_
6563 ENUM
6564   BFD_RELOC_MICROBLAZE_COPY
6565 ENUMDOC
6566   This is used to tell the dynamic linker to copy the value out of
6567   the dynamic object into the runtime process image.
6568 ENUM
6569   BFD_RELOC_MICROBLAZE_64_TLS
6570 ENUMDOC
6571   Unused Reloc
6572 ENUM
6573   BFD_RELOC_MICROBLAZE_64_TLSGD
6574 ENUMDOC
6575   This is a 64 bit reloc that stores the 32 bit GOT relative value
6576   of the GOT TLS GD info entry in two words (with an imm instruction). The
6577   relocation is GOT offset.
6578 ENUM
6579   BFD_RELOC_MICROBLAZE_64_TLSLD
6580 ENUMDOC
6581   This is a 64 bit reloc that stores the 32 bit GOT relative value
6582   of the GOT TLS LD info entry in two words (with an imm instruction). The
6583   relocation is GOT offset.
6584 ENUM
6585   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6586 ENUMDOC
6587   This is a 32 bit reloc that stores the Module ID to GOT(n).
6588 ENUM
6589   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6590 ENUMDOC
6591   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6592 ENUM
6593   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6594 ENUMDOC
6595   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6596   instruction)
6597 ENUM
6598   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6599 ENUMDOC
6600   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6601   to two words (uses imm instruction).
6602 ENUM
6603   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6604 ENUMDOC
6605   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6606   to two words (uses imm instruction).
6607
6608 ENUM
6609   BFD_RELOC_AARCH64_RELOC_START
6610 ENUMDOC
6611   AArch64 pseudo relocation code to mark the start of the AArch64
6612   relocation enumerators.  N.B. the order of the enumerators is
6613   important as several tables in the AArch64 bfd backend are indexed
6614   by these enumerators; make sure they are all synced.
6615 ENUM
6616   BFD_RELOC_AARCH64_NONE
6617 ENUMDOC
6618   AArch64 null relocation code.
6619 ENUM
6620   BFD_RELOC_AARCH64_64
6621 ENUMX
6622   BFD_RELOC_AARCH64_32
6623 ENUMX
6624   BFD_RELOC_AARCH64_16
6625 ENUMDOC
6626   Basic absolute relocations of N bits.  These are equivalent to
6627 BFD_RELOC_N and they were added to assist the indexing of the howto
6628 table.
6629 ENUM
6630   BFD_RELOC_AARCH64_64_PCREL
6631 ENUMX
6632   BFD_RELOC_AARCH64_32_PCREL
6633 ENUMX
6634   BFD_RELOC_AARCH64_16_PCREL
6635 ENUMDOC
6636   PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL
6637 and they were added to assist the indexing of the howto table.
6638 ENUM
6639   BFD_RELOC_AARCH64_MOVW_G0
6640 ENUMDOC
6641   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6642   of an unsigned address/value.
6643 ENUM
6644   BFD_RELOC_AARCH64_MOVW_G0_NC
6645 ENUMDOC
6646   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
6647   an address/value.  No overflow checking.
6648 ENUM
6649   BFD_RELOC_AARCH64_MOVW_G1
6650 ENUMDOC
6651   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
6652   of an unsigned address/value.
6653 ENUM
6654   BFD_RELOC_AARCH64_MOVW_G1_NC
6655 ENUMDOC
6656   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
6657   of an address/value.  No overflow checking.
6658 ENUM
6659   BFD_RELOC_AARCH64_MOVW_G2
6660 ENUMDOC
6661   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
6662   of an unsigned address/value.
6663 ENUM
6664   BFD_RELOC_AARCH64_MOVW_G2_NC
6665 ENUMDOC
6666   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
6667   of an address/value.  No overflow checking.
6668 ENUM
6669   BFD_RELOC_AARCH64_MOVW_G3
6670 ENUMDOC
6671   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
6672   of a signed or unsigned address/value.
6673 ENUM
6674   BFD_RELOC_AARCH64_MOVW_G0_S
6675 ENUMDOC
6676   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
6677   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6678   value's sign.
6679 ENUM
6680   BFD_RELOC_AARCH64_MOVW_G1_S
6681 ENUMDOC
6682   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
6683   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6684   value's sign.
6685 ENUM
6686   BFD_RELOC_AARCH64_MOVW_G2_S
6687 ENUMDOC
6688   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
6689   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6690   value's sign.
6691 ENUM
6692   BFD_RELOC_AARCH64_LD_LO19_PCREL
6693 ENUMDOC
6694   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
6695   offset.  The lowest two bits must be zero and are not stored in the
6696   instruction, giving a 21 bit signed byte offset.
6697 ENUM
6698   BFD_RELOC_AARCH64_ADR_LO21_PCREL
6699 ENUMDOC
6700   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
6701 ENUM
6702   BFD_RELOC_AARCH64_ADR_HI21_PCREL
6703 ENUMDOC
6704   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6705   offset, giving a 4KB aligned page base address.
6706 ENUM
6707   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
6708 ENUMDOC
6709   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6710   offset, giving a 4KB aligned page base address, but with no overflow
6711   checking.
6712 ENUM
6713   BFD_RELOC_AARCH64_ADD_LO12
6714 ENUMDOC
6715   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
6716   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6717 ENUM
6718   BFD_RELOC_AARCH64_LDST8_LO12
6719 ENUMDOC
6720   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
6721   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6722 ENUM
6723   BFD_RELOC_AARCH64_TSTBR14
6724 ENUMDOC
6725   AArch64 14 bit pc-relative test bit and branch.
6726   The lowest two bits must be zero and are not stored in the instruction,
6727   giving a 16 bit signed byte offset.
6728 ENUM
6729   BFD_RELOC_AARCH64_BRANCH19
6730 ENUMDOC
6731   AArch64 19 bit pc-relative conditional branch and compare & branch.
6732   The lowest two bits must be zero and are not stored in the instruction,
6733   giving a 21 bit signed byte offset.
6734 ENUM
6735   BFD_RELOC_AARCH64_JUMP26
6736 ENUMDOC
6737   AArch64 26 bit pc-relative unconditional branch.
6738   The lowest two bits must be zero and are not stored in the instruction,
6739   giving a 28 bit signed byte offset.
6740 ENUM
6741   BFD_RELOC_AARCH64_CALL26
6742 ENUMDOC
6743   AArch64 26 bit pc-relative unconditional branch and link.
6744   The lowest two bits must be zero and are not stored in the instruction,
6745   giving a 28 bit signed byte offset.
6746 ENUM
6747   BFD_RELOC_AARCH64_LDST16_LO12
6748 ENUMDOC
6749   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
6750   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6751 ENUM
6752   BFD_RELOC_AARCH64_LDST32_LO12
6753 ENUMDOC
6754   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
6755   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6756 ENUM
6757   BFD_RELOC_AARCH64_LDST64_LO12
6758 ENUMDOC
6759   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
6760   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6761 ENUM
6762   BFD_RELOC_AARCH64_LDST128_LO12
6763 ENUMDOC
6764   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
6765   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6766 ENUM
6767   BFD_RELOC_AARCH64_GOT_LD_PREL19
6768 ENUMDOC
6769   AArch64 Load Literal instruction, holding a 19 bit PC relative word
6770   offset of the global offset table entry for a symbol.  The lowest two
6771   bits must be zero and are not stored in the instruction, giving a 21
6772   bit signed byte offset.  This relocation type requires signed overflow
6773   checking.
6774 ENUM
6775   BFD_RELOC_AARCH64_ADR_GOT_PAGE
6776 ENUMDOC
6777   Get to the page base of the global offset table entry for a symbol as
6778   part of an ADRP instruction using a 21 bit PC relative value.Used in
6779   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
6780 ENUM
6781   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
6782 ENUMDOC
6783   Unsigned 12 bit byte offset for 64 bit load/store from the page of
6784   the GOT entry for this symbol.  Used in conjunction with
6785   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in LP64 ABI only.
6786 ENUM
6787   BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
6788 ENUMDOC
6789   Unsigned 12 bit byte offset for 32 bit load/store from the page of
6790   the GOT entry for this symbol.  Used in conjunction with
6791   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in ILP32 ABI only.
6792 ENUM
6793   BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
6794 ENUMDOC
6795   Unsigned 15 bit byte offset for 64 bit load/store from the page of
6796   the GOT entry for this symbol. Valid in ILP64 ABI only.
6797 ENUM
6798   BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14
6799 ENUMDOC
6800   Scaled 14 bit byte offset to the page base of the global offset table.
6801 ENUM
6802   BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15
6803 ENUMDOC
6804   Scaled 15 bit byte offset to the page base of the global offset table.
6805 ENUM
6806   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
6807 ENUMDOC
6808   Get to the page base of the global offset table entry for a symbols
6809   tls_index structure as part of an adrp instruction using a 21 bit PC
6810   relative value.  Used in conjunction with
6811   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
6812 ENUM
6813   BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
6814 ENUMDOC
6815   AArch64 TLS General Dynamic
6816 ENUM
6817   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
6818 ENUMDOC
6819   Unsigned 12 bit byte offset to global offset table entry for a symbols
6820   tls_index structure.  Used in conjunction with
6821   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
6822 ENUM
6823   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
6824 ENUMDOC
6825   AArch64 TLS INITIAL EXEC relocation.
6826 ENUM
6827   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
6828 ENUMDOC
6829   AArch64 TLS INITIAL EXEC relocation.
6830 ENUM
6831   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
6832 ENUMDOC
6833   AArch64 TLS INITIAL EXEC relocation.
6834 ENUM
6835   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
6836 ENUMDOC
6837   AArch64 TLS INITIAL EXEC relocation.
6838 ENUM
6839   BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
6840 ENUMDOC
6841   AArch64 TLS INITIAL EXEC relocation.
6842 ENUM
6843   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
6844 ENUMDOC
6845   AArch64 TLS INITIAL EXEC relocation.
6846 ENUM
6847   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12
6848 ENUMDOC
6849   Unsigned 12 bit byte offset to module TLS base address.
6850 ENUM
6851   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
6852 ENUMDOC
6853   No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
6854 ENUM
6855   BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC
6856 ENUMDOC
6857   Unsigned 12 bit byte offset to global offset table entry for a symbols
6858   tls_index structure.  Used in conjunction with
6859   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
6860 ENUM
6861   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21
6862 ENUMDOC
6863   GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP
6864   instruction.
6865 ENUM
6866   BFD_RELOC_AARCH64_TLSLD_ADR_PREL21
6867 ENUMDOC
6868   GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.
6869 ENUM
6870   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
6871 ENUMDOC
6872   AArch64 TLS LOCAL EXEC relocation.
6873 ENUM
6874   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
6875 ENUMDOC
6876   AArch64 TLS LOCAL EXEC relocation.
6877 ENUM
6878   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
6879 ENUMDOC
6880   AArch64 TLS LOCAL EXEC relocation.
6881 ENUM
6882   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
6883 ENUMDOC
6884   AArch64 TLS LOCAL EXEC relocation.
6885 ENUM
6886   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
6887 ENUMDOC
6888   AArch64 TLS LOCAL EXEC relocation.
6889 ENUM
6890   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
6891 ENUMDOC
6892   AArch64 TLS LOCAL EXEC relocation.
6893 ENUM
6894   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
6895 ENUMDOC
6896   AArch64 TLS LOCAL EXEC relocation.
6897 ENUM
6898   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
6899 ENUMDOC
6900   AArch64 TLS LOCAL EXEC relocation.
6901 ENUM
6902   BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
6903 ENUMDOC
6904   AArch64 TLS DESC relocation.
6905 ENUM
6906   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
6907 ENUMDOC
6908   AArch64 TLS DESC relocation.
6909 ENUM
6910   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
6911 ENUMDOC
6912   AArch64 TLS DESC relocation.
6913 ENUM
6914   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
6915 ENUMDOC
6916   AArch64 TLS DESC relocation.
6917 ENUM
6918   BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
6919 ENUMDOC
6920   AArch64 TLS DESC relocation.
6921 ENUM
6922   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
6923 ENUMDOC
6924   AArch64 TLS DESC relocation.
6925 ENUM
6926   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
6927 ENUMDOC
6928   AArch64 TLS DESC relocation.
6929 ENUM
6930   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
6931 ENUMDOC
6932   AArch64 TLS DESC relocation.
6933 ENUM
6934   BFD_RELOC_AARCH64_TLSDESC_LDR
6935 ENUMDOC
6936   AArch64 TLS DESC relocation.
6937 ENUM
6938   BFD_RELOC_AARCH64_TLSDESC_ADD
6939 ENUMDOC
6940   AArch64 TLS DESC relocation.
6941 ENUM
6942   BFD_RELOC_AARCH64_TLSDESC_CALL
6943 ENUMDOC
6944   AArch64 TLS DESC relocation.
6945 ENUM
6946   BFD_RELOC_AARCH64_COPY
6947 ENUMDOC
6948   AArch64 TLS relocation.
6949 ENUM
6950   BFD_RELOC_AARCH64_GLOB_DAT
6951 ENUMDOC
6952   AArch64 TLS relocation.
6953 ENUM
6954   BFD_RELOC_AARCH64_JUMP_SLOT
6955 ENUMDOC
6956   AArch64 TLS relocation.
6957 ENUM
6958   BFD_RELOC_AARCH64_RELATIVE
6959 ENUMDOC
6960   AArch64 TLS relocation.
6961 ENUM
6962   BFD_RELOC_AARCH64_TLS_DTPMOD
6963 ENUMDOC
6964   AArch64 TLS relocation.
6965 ENUM
6966   BFD_RELOC_AARCH64_TLS_DTPREL
6967 ENUMDOC
6968   AArch64 TLS relocation.
6969 ENUM
6970   BFD_RELOC_AARCH64_TLS_TPREL
6971 ENUMDOC
6972   AArch64 TLS relocation.
6973 ENUM
6974   BFD_RELOC_AARCH64_TLSDESC
6975 ENUMDOC
6976   AArch64 TLS relocation.
6977 ENUM
6978   BFD_RELOC_AARCH64_IRELATIVE
6979 ENUMDOC
6980   AArch64 support for STT_GNU_IFUNC.
6981 ENUM
6982   BFD_RELOC_AARCH64_RELOC_END
6983 ENUMDOC
6984   AArch64 pseudo relocation code to mark the end of the AArch64
6985   relocation enumerators that have direct mapping to ELF reloc codes.
6986   There are a few more enumerators after this one; those are mainly
6987   used by the AArch64 assembler for the internal fixup or to select
6988   one of the above enumerators.
6989 ENUM
6990   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
6991 ENUMDOC
6992   AArch64 pseudo relocation code to be used internally by the AArch64
6993   assembler and not (currently) written to any object files.
6994 ENUM
6995   BFD_RELOC_AARCH64_LDST_LO12
6996 ENUMDOC
6997   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
6998   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6999 ENUM
7000   BFD_RELOC_AARCH64_LD_GOT_LO12_NC
7001 ENUMDOC
7002   AArch64 pseudo relocation code to be used internally by the AArch64
7003   assembler and not (currently) written to any object files.
7004 ENUM
7005   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
7006 ENUMDOC
7007   AArch64 pseudo relocation code to be used internally by the AArch64
7008   assembler and not (currently) written to any object files.
7009 ENUM
7010   BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
7011 ENUMDOC
7012   AArch64 pseudo relocation code to be used internally by the AArch64
7013   assembler and not (currently) written to any object files.
7014
7015 ENUM
7016   BFD_RELOC_TILEPRO_COPY
7017 ENUMX
7018   BFD_RELOC_TILEPRO_GLOB_DAT
7019 ENUMX
7020   BFD_RELOC_TILEPRO_JMP_SLOT
7021 ENUMX
7022   BFD_RELOC_TILEPRO_RELATIVE
7023 ENUMX
7024   BFD_RELOC_TILEPRO_BROFF_X1
7025 ENUMX
7026   BFD_RELOC_TILEPRO_JOFFLONG_X1
7027 ENUMX
7028   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
7029 ENUMX
7030   BFD_RELOC_TILEPRO_IMM8_X0
7031 ENUMX
7032   BFD_RELOC_TILEPRO_IMM8_Y0
7033 ENUMX
7034   BFD_RELOC_TILEPRO_IMM8_X1
7035 ENUMX
7036   BFD_RELOC_TILEPRO_IMM8_Y1
7037 ENUMX
7038   BFD_RELOC_TILEPRO_DEST_IMM8_X1
7039 ENUMX
7040   BFD_RELOC_TILEPRO_MT_IMM15_X1
7041 ENUMX
7042   BFD_RELOC_TILEPRO_MF_IMM15_X1
7043 ENUMX
7044   BFD_RELOC_TILEPRO_IMM16_X0
7045 ENUMX
7046   BFD_RELOC_TILEPRO_IMM16_X1
7047 ENUMX
7048   BFD_RELOC_TILEPRO_IMM16_X0_LO
7049 ENUMX
7050   BFD_RELOC_TILEPRO_IMM16_X1_LO
7051 ENUMX
7052   BFD_RELOC_TILEPRO_IMM16_X0_HI
7053 ENUMX
7054   BFD_RELOC_TILEPRO_IMM16_X1_HI
7055 ENUMX
7056   BFD_RELOC_TILEPRO_IMM16_X0_HA
7057 ENUMX
7058   BFD_RELOC_TILEPRO_IMM16_X1_HA
7059 ENUMX
7060   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
7061 ENUMX
7062   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
7063 ENUMX
7064   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7065 ENUMX
7066   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7067 ENUMX
7068   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7069 ENUMX
7070   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7071 ENUMX
7072   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7073 ENUMX
7074   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7075 ENUMX
7076   BFD_RELOC_TILEPRO_IMM16_X0_GOT
7077 ENUMX
7078   BFD_RELOC_TILEPRO_IMM16_X1_GOT
7079 ENUMX
7080   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7081 ENUMX
7082   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7083 ENUMX
7084   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7085 ENUMX
7086   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7087 ENUMX
7088   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7089 ENUMX
7090   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7091 ENUMX
7092   BFD_RELOC_TILEPRO_MMSTART_X0
7093 ENUMX
7094   BFD_RELOC_TILEPRO_MMEND_X0
7095 ENUMX
7096   BFD_RELOC_TILEPRO_MMSTART_X1
7097 ENUMX
7098   BFD_RELOC_TILEPRO_MMEND_X1
7099 ENUMX
7100   BFD_RELOC_TILEPRO_SHAMT_X0
7101 ENUMX
7102   BFD_RELOC_TILEPRO_SHAMT_X1
7103 ENUMX
7104   BFD_RELOC_TILEPRO_SHAMT_Y0
7105 ENUMX
7106   BFD_RELOC_TILEPRO_SHAMT_Y1
7107 ENUMX
7108   BFD_RELOC_TILEPRO_TLS_GD_CALL
7109 ENUMX
7110   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7111 ENUMX
7112   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7113 ENUMX
7114   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7115 ENUMX
7116   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7117 ENUMX
7118   BFD_RELOC_TILEPRO_TLS_IE_LOAD
7119 ENUMX
7120   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7121 ENUMX
7122   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7123 ENUMX
7124   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7125 ENUMX
7126   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7127 ENUMX
7128   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7129 ENUMX
7130   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7131 ENUMX
7132   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7133 ENUMX
7134   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7135 ENUMX
7136   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7137 ENUMX
7138   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7139 ENUMX
7140   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7141 ENUMX
7142   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7143 ENUMX
7144   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7145 ENUMX
7146   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7147 ENUMX
7148   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7149 ENUMX
7150   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7151 ENUMX
7152   BFD_RELOC_TILEPRO_TLS_DTPMOD32
7153 ENUMX
7154   BFD_RELOC_TILEPRO_TLS_DTPOFF32
7155 ENUMX
7156   BFD_RELOC_TILEPRO_TLS_TPOFF32
7157 ENUMX
7158   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7159 ENUMX
7160   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7161 ENUMX
7162   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7163 ENUMX
7164   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7165 ENUMX
7166   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7167 ENUMX
7168   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7169 ENUMX
7170   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7171 ENUMX
7172   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7173 ENUMDOC
7174   Tilera TILEPro Relocations.
7175 ENUM
7176   BFD_RELOC_TILEGX_HW0
7177 ENUMX
7178   BFD_RELOC_TILEGX_HW1
7179 ENUMX
7180   BFD_RELOC_TILEGX_HW2
7181 ENUMX
7182   BFD_RELOC_TILEGX_HW3
7183 ENUMX
7184   BFD_RELOC_TILEGX_HW0_LAST
7185 ENUMX
7186   BFD_RELOC_TILEGX_HW1_LAST
7187 ENUMX
7188   BFD_RELOC_TILEGX_HW2_LAST
7189 ENUMX
7190   BFD_RELOC_TILEGX_COPY
7191 ENUMX
7192   BFD_RELOC_TILEGX_GLOB_DAT
7193 ENUMX
7194   BFD_RELOC_TILEGX_JMP_SLOT
7195 ENUMX
7196   BFD_RELOC_TILEGX_RELATIVE
7197 ENUMX
7198   BFD_RELOC_TILEGX_BROFF_X1
7199 ENUMX
7200   BFD_RELOC_TILEGX_JUMPOFF_X1
7201 ENUMX
7202   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7203 ENUMX
7204   BFD_RELOC_TILEGX_IMM8_X0
7205 ENUMX
7206   BFD_RELOC_TILEGX_IMM8_Y0
7207 ENUMX
7208   BFD_RELOC_TILEGX_IMM8_X1
7209 ENUMX
7210   BFD_RELOC_TILEGX_IMM8_Y1
7211 ENUMX
7212   BFD_RELOC_TILEGX_DEST_IMM8_X1
7213 ENUMX
7214   BFD_RELOC_TILEGX_MT_IMM14_X1
7215 ENUMX
7216   BFD_RELOC_TILEGX_MF_IMM14_X1
7217 ENUMX
7218   BFD_RELOC_TILEGX_MMSTART_X0
7219 ENUMX
7220   BFD_RELOC_TILEGX_MMEND_X0
7221 ENUMX
7222   BFD_RELOC_TILEGX_SHAMT_X0
7223 ENUMX
7224   BFD_RELOC_TILEGX_SHAMT_X1
7225 ENUMX
7226   BFD_RELOC_TILEGX_SHAMT_Y0
7227 ENUMX
7228   BFD_RELOC_TILEGX_SHAMT_Y1
7229 ENUMX
7230   BFD_RELOC_TILEGX_IMM16_X0_HW0
7231 ENUMX
7232   BFD_RELOC_TILEGX_IMM16_X1_HW0
7233 ENUMX
7234   BFD_RELOC_TILEGX_IMM16_X0_HW1
7235 ENUMX
7236   BFD_RELOC_TILEGX_IMM16_X1_HW1
7237 ENUMX
7238   BFD_RELOC_TILEGX_IMM16_X0_HW2
7239 ENUMX
7240   BFD_RELOC_TILEGX_IMM16_X1_HW2
7241 ENUMX
7242   BFD_RELOC_TILEGX_IMM16_X0_HW3
7243 ENUMX
7244   BFD_RELOC_TILEGX_IMM16_X1_HW3
7245 ENUMX
7246   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7247 ENUMX
7248   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7249 ENUMX
7250   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7251 ENUMX
7252   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7253 ENUMX
7254   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7255 ENUMX
7256   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7257 ENUMX
7258   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7259 ENUMX
7260   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7261 ENUMX
7262   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7263 ENUMX
7264   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7265 ENUMX
7266   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7267 ENUMX
7268   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7269 ENUMX
7270   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7271 ENUMX
7272   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7273 ENUMX
7274   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7275 ENUMX
7276   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7277 ENUMX
7278   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7279 ENUMX
7280   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7281 ENUMX
7282   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7283 ENUMX
7284   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7285 ENUMX
7286   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7287 ENUMX
7288   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7289 ENUMX
7290   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7291 ENUMX
7292   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7293 ENUMX
7294   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7295 ENUMX
7296   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7297 ENUMX
7298   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7299 ENUMX
7300   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7301 ENUMX
7302   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7303 ENUMX
7304   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7305 ENUMX
7306   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7307 ENUMX
7308   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7309 ENUMX
7310   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7311 ENUMX
7312   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7313 ENUMX
7314   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7315 ENUMX
7316   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7317 ENUMX
7318   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7319 ENUMX
7320   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7321 ENUMX
7322   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7323 ENUMX
7324   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7325 ENUMX
7326   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7327 ENUMX
7328   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7329 ENUMX
7330   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7331 ENUMX
7332   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7333 ENUMX
7334   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7335 ENUMX
7336   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7337 ENUMX
7338   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7339 ENUMX
7340   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7341 ENUMX
7342   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7343 ENUMX
7344   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7345 ENUMX
7346   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7347 ENUMX
7348   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7349 ENUMX
7350   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7351 ENUMX
7352   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7353 ENUMX
7354   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7355 ENUMX
7356   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7357 ENUMX
7358   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7359 ENUMX
7360   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7361 ENUMX
7362   BFD_RELOC_TILEGX_TLS_DTPMOD64
7363 ENUMX
7364   BFD_RELOC_TILEGX_TLS_DTPOFF64
7365 ENUMX
7366   BFD_RELOC_TILEGX_TLS_TPOFF64
7367 ENUMX
7368   BFD_RELOC_TILEGX_TLS_DTPMOD32
7369 ENUMX
7370   BFD_RELOC_TILEGX_TLS_DTPOFF32
7371 ENUMX
7372   BFD_RELOC_TILEGX_TLS_TPOFF32
7373 ENUMX
7374   BFD_RELOC_TILEGX_TLS_GD_CALL
7375 ENUMX
7376   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7377 ENUMX
7378   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7379 ENUMX
7380   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7381 ENUMX
7382   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7383 ENUMX
7384   BFD_RELOC_TILEGX_TLS_IE_LOAD
7385 ENUMX
7386   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7387 ENUMX
7388   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7389 ENUMX
7390   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7391 ENUMX
7392   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7393 ENUMDOC
7394   Tilera TILE-Gx Relocations.
7395
7396 ENUM
7397   BFD_RELOC_EPIPHANY_SIMM8
7398 ENUMDOC
7399   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7400 ENUM
7401   BFD_RELOC_EPIPHANY_SIMM24
7402 ENUMDOC
7403   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7404 ENUM
7405   BFD_RELOC_EPIPHANY_HIGH
7406 ENUMDOC
7407   Adapteva EPIPHANY - 16 most-significant bits of absolute address
7408 ENUM
7409   BFD_RELOC_EPIPHANY_LOW
7410 ENUMDOC
7411   Adapteva EPIPHANY - 16 least-significant bits of absolute address
7412 ENUM
7413   BFD_RELOC_EPIPHANY_SIMM11
7414 ENUMDOC
7415   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7416 ENUM
7417   BFD_RELOC_EPIPHANY_IMM11
7418 ENUMDOC
7419   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7420 ENUM
7421   BFD_RELOC_EPIPHANY_IMM8
7422 ENUMDOC
7423   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7424
7425 ENUM
7426   BFD_RELOC_VISIUM_HI16
7427 ENUMX
7428   BFD_RELOC_VISIUM_LO16
7429 ENUMX
7430   BFD_RELOC_VISIUM_IM16
7431 ENUMX
7432   BFD_RELOC_VISIUM_REL16
7433 ENUMX
7434   BFD_RELOC_VISIUM_HI16_PCREL
7435 ENUMX
7436   BFD_RELOC_VISIUM_LO16_PCREL
7437 ENUMX
7438   BFD_RELOC_VISIUM_IM16_PCREL
7439 ENUMDOC
7440   Visium Relocations.
7441
7442 ENDSENUM
7443   BFD_RELOC_UNUSED
7444 CODE_FRAGMENT
7445 .
7446 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
7447 */
7448
7449 /*
7450 FUNCTION
7451         bfd_reloc_type_lookup
7452         bfd_reloc_name_lookup
7453
7454 SYNOPSIS
7455         reloc_howto_type *bfd_reloc_type_lookup
7456           (bfd *abfd, bfd_reloc_code_real_type code);
7457         reloc_howto_type *bfd_reloc_name_lookup
7458           (bfd *abfd, const char *reloc_name);
7459
7460 DESCRIPTION
7461         Return a pointer to a howto structure which, when
7462         invoked, will perform the relocation @var{code} on data from the
7463         architecture noted.
7464
7465 */
7466
7467 reloc_howto_type *
7468 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7469 {
7470   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
7471 }
7472
7473 reloc_howto_type *
7474 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
7475 {
7476   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
7477 }
7478
7479 static reloc_howto_type bfd_howto_32 =
7480 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
7481
7482 /*
7483 INTERNAL_FUNCTION
7484         bfd_default_reloc_type_lookup
7485
7486 SYNOPSIS
7487         reloc_howto_type *bfd_default_reloc_type_lookup
7488           (bfd *abfd, bfd_reloc_code_real_type  code);
7489
7490 DESCRIPTION
7491         Provides a default relocation lookup routine for any architecture.
7492
7493 */
7494
7495 reloc_howto_type *
7496 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7497 {
7498   switch (code)
7499     {
7500     case BFD_RELOC_CTOR:
7501       /* The type of reloc used in a ctor, which will be as wide as the
7502          address - so either a 64, 32, or 16 bitter.  */
7503       switch (bfd_arch_bits_per_address (abfd))
7504         {
7505         case 64:
7506           BFD_FAIL ();
7507         case 32:
7508           return &bfd_howto_32;
7509         case 16:
7510           BFD_FAIL ();
7511         default:
7512           BFD_FAIL ();
7513         }
7514     default:
7515       BFD_FAIL ();
7516     }
7517   return NULL;
7518 }
7519
7520 /*
7521 FUNCTION
7522         bfd_get_reloc_code_name
7523
7524 SYNOPSIS
7525         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
7526
7527 DESCRIPTION
7528         Provides a printable name for the supplied relocation code.
7529         Useful mainly for printing error messages.
7530 */
7531
7532 const char *
7533 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
7534 {
7535   if (code > BFD_RELOC_UNUSED)
7536     return 0;
7537   return bfd_reloc_code_real_names[code];
7538 }
7539
7540 /*
7541 INTERNAL_FUNCTION
7542         bfd_generic_relax_section
7543
7544 SYNOPSIS
7545         bfd_boolean bfd_generic_relax_section
7546           (bfd *abfd,
7547            asection *section,
7548            struct bfd_link_info *,
7549            bfd_boolean *);
7550
7551 DESCRIPTION
7552         Provides default handling for relaxing for back ends which
7553         don't do relaxing.
7554 */
7555
7556 bfd_boolean
7557 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
7558                            asection *section ATTRIBUTE_UNUSED,
7559                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
7560                            bfd_boolean *again)
7561 {
7562   if (bfd_link_relocatable (link_info))
7563     (*link_info->callbacks->einfo)
7564       (_("%P%F: --relax and -r may not be used together\n"));
7565
7566   *again = FALSE;
7567   return TRUE;
7568 }
7569
7570 /*
7571 INTERNAL_FUNCTION
7572         bfd_generic_gc_sections
7573
7574 SYNOPSIS
7575         bfd_boolean bfd_generic_gc_sections
7576           (bfd *, struct bfd_link_info *);
7577
7578 DESCRIPTION
7579         Provides default handling for relaxing for back ends which
7580         don't do section gc -- i.e., does nothing.
7581 */
7582
7583 bfd_boolean
7584 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
7585                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
7586 {
7587   return TRUE;
7588 }
7589
7590 /*
7591 INTERNAL_FUNCTION
7592         bfd_generic_lookup_section_flags
7593
7594 SYNOPSIS
7595         bfd_boolean bfd_generic_lookup_section_flags
7596           (struct bfd_link_info *, struct flag_info *, asection *);
7597
7598 DESCRIPTION
7599         Provides default handling for section flags lookup
7600         -- i.e., does nothing.
7601         Returns FALSE if the section should be omitted, otherwise TRUE.
7602 */
7603
7604 bfd_boolean
7605 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
7606                                   struct flag_info *flaginfo,
7607                                   asection *section ATTRIBUTE_UNUSED)
7608 {
7609   if (flaginfo != NULL)
7610     {
7611       (*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
7612       return FALSE;
7613     }
7614   return TRUE;
7615 }
7616
7617 /*
7618 INTERNAL_FUNCTION
7619         bfd_generic_merge_sections
7620
7621 SYNOPSIS
7622         bfd_boolean bfd_generic_merge_sections
7623           (bfd *, struct bfd_link_info *);
7624
7625 DESCRIPTION
7626         Provides default handling for SEC_MERGE section merging for back ends
7627         which don't have SEC_MERGE support -- i.e., does nothing.
7628 */
7629
7630 bfd_boolean
7631 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
7632                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
7633 {
7634   return TRUE;
7635 }
7636
7637 /*
7638 INTERNAL_FUNCTION
7639         bfd_generic_get_relocated_section_contents
7640
7641 SYNOPSIS
7642         bfd_byte *bfd_generic_get_relocated_section_contents
7643           (bfd *abfd,
7644            struct bfd_link_info *link_info,
7645            struct bfd_link_order *link_order,
7646            bfd_byte *data,
7647            bfd_boolean relocatable,
7648            asymbol **symbols);
7649
7650 DESCRIPTION
7651         Provides default handling of relocation effort for back ends
7652         which can't be bothered to do it efficiently.
7653
7654 */
7655
7656 bfd_byte *
7657 bfd_generic_get_relocated_section_contents (bfd *abfd,
7658                                             struct bfd_link_info *link_info,
7659                                             struct bfd_link_order *link_order,
7660                                             bfd_byte *data,
7661                                             bfd_boolean relocatable,
7662                                             asymbol **symbols)
7663 {
7664   bfd *input_bfd = link_order->u.indirect.section->owner;
7665   asection *input_section = link_order->u.indirect.section;
7666   long reloc_size;
7667   arelent **reloc_vector;
7668   long reloc_count;
7669
7670   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
7671   if (reloc_size < 0)
7672     return NULL;
7673
7674   /* Read in the section.  */
7675   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
7676     return NULL;
7677
7678   if (reloc_size == 0)
7679     return data;
7680
7681   reloc_vector = (arelent **) bfd_malloc (reloc_size);
7682   if (reloc_vector == NULL)
7683     return NULL;
7684
7685   reloc_count = bfd_canonicalize_reloc (input_bfd,
7686                                         input_section,
7687                                         reloc_vector,
7688                                         symbols);
7689   if (reloc_count < 0)
7690     goto error_return;
7691
7692   if (reloc_count > 0)
7693     {
7694       arelent **parent;
7695       for (parent = reloc_vector; *parent != NULL; parent++)
7696         {
7697           char *error_message = NULL;
7698           asymbol *symbol;
7699           bfd_reloc_status_type r;
7700
7701           symbol = *(*parent)->sym_ptr_ptr;
7702           if (symbol->section && discarded_section (symbol->section))
7703             {
7704               bfd_byte *p;
7705               static reloc_howto_type none_howto
7706                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
7707                          "unused", FALSE, 0, 0, FALSE);
7708
7709               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
7710               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
7711                                    p);
7712               (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
7713               (*parent)->addend = 0;
7714               (*parent)->howto = &none_howto;
7715               r = bfd_reloc_ok;
7716             }
7717           else
7718             r = bfd_perform_relocation (input_bfd,
7719                                         *parent,
7720                                         data,
7721                                         input_section,
7722                                         relocatable ? abfd : NULL,
7723                                         &error_message);
7724
7725           if (relocatable)
7726             {
7727               asection *os = input_section->output_section;
7728
7729               /* A partial link, so keep the relocs.  */
7730               os->orelocation[os->reloc_count] = *parent;
7731               os->reloc_count++;
7732             }
7733
7734           if (r != bfd_reloc_ok)
7735             {
7736               switch (r)
7737                 {
7738                 case bfd_reloc_undefined:
7739                   if (!((*link_info->callbacks->undefined_symbol)
7740                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7741                          input_bfd, input_section, (*parent)->address,
7742                          TRUE)))
7743                     goto error_return;
7744                   break;
7745                 case bfd_reloc_dangerous:
7746                   BFD_ASSERT (error_message != NULL);
7747                   if (!((*link_info->callbacks->reloc_dangerous)
7748                         (link_info, error_message, input_bfd, input_section,
7749                          (*parent)->address)))
7750                     goto error_return;
7751                   break;
7752                 case bfd_reloc_overflow:
7753                   if (!((*link_info->callbacks->reloc_overflow)
7754                         (link_info, NULL,
7755                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7756                          (*parent)->howto->name, (*parent)->addend,
7757                          input_bfd, input_section, (*parent)->address)))
7758                     goto error_return;
7759                   break;
7760                 case bfd_reloc_outofrange:
7761                   /* PR ld/13730:
7762                      This error can result when processing some partially
7763                      complete binaries.  Do not abort, but issue an error
7764                      message instead.  */
7765                   link_info->callbacks->einfo
7766                     (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
7767                      abfd, input_section, * parent);
7768                   goto error_return;
7769
7770                 case bfd_reloc_notsupported:
7771                   /* PR ld/17512
7772                      This error can result when processing a corrupt binary.
7773                      Do not abort.  Issue an error message instead.  */
7774                   link_info->callbacks->einfo
7775                     (_("%X%P: %B(%A): relocation \"%R\" is not supported\n"),
7776                      abfd, input_section, * parent);
7777                   goto error_return;
7778
7779                 default:
7780                   /* PR 17512; file: 90c2a92e.
7781                      Report unexpected results, without aborting.  */
7782                   link_info->callbacks->einfo
7783                     (_("%X%P: %B(%A): relocation \"%R\" returns an unrecognized value %x\n"),
7784                      abfd, input_section, * parent, r);
7785                   break;
7786                 }
7787
7788             }
7789         }
7790     }
7791
7792   free (reloc_vector);
7793   return data;
7794
7795 error_return:
7796   free (reloc_vector);
7797   return NULL;
7798 }