bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright (C) 1990-2014 Free Software Foundation, Inc.
   3    Written by Cygnus Support.
   4
   5    This file is part of BFD, the Binary File Descriptor library.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 /*
  23 SECTION
  24         Relocations
  25
  26         BFD maintains relocations in much the same way it maintains
  27         symbols: they are left alone until required, then read in
  28         en-masse and translated into an internal form.  A common
  29         routine <<bfd_perform_relocation>> acts upon the
  30         canonical form to do the fixup.
  31
  32         Relocations are maintained on a per section basis,
  33         while symbols are maintained on a per BFD basis.
  34
  35         All that a back end has to do to fit the BFD interface is to create
  36         a <<struct reloc_cache_entry>> for each relocation
  37         in a particular section, and fill in the right bits of the structures.
  38
  39 @menu
  40 @* typedef arelent::
  41 @* howto manager::
  42 @end menu
  43
  44 */
  45
  46 /* DO compile in the reloc_code name table from libbfd.h.  */
  47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  48
  49 #include "sysdep.h"
  50 #include "bfd.h"
  51 #include "bfdlink.h"
  52 #include "libbfd.h"
  53 /*
  54 DOCDD
  55 INODE
  56         typedef arelent, howto manager, Relocations, Relocations
  57
  58 SUBSECTION
  59         typedef arelent
  60
  61         This is the structure of a relocation entry:
  62
  63 CODE_FRAGMENT
  64 .
  65 .typedef enum bfd_reloc_status
  66 .{
  67 .  {* No errors detected.  *}
  68 .  bfd_reloc_ok,
  69 .
  70 .  {* The relocation was performed, but there was an overflow.  *}
  71 .  bfd_reloc_overflow,
  72 .
  73 .  {* The address to relocate was not within the section supplied.  *}
  74 .  bfd_reloc_outofrange,
  75 .
  76 .  {* Used by special functions.  *}
  77 .  bfd_reloc_continue,
  78 .
  79 .  {* Unsupported relocation size requested.  *}
  80 .  bfd_reloc_notsupported,
  81 .
  82 .  {* Unused.  *}
  83 .  bfd_reloc_other,
  84 .
  85 .  {* The symbol to relocate against was undefined.  *}
  86 .  bfd_reloc_undefined,
  87 .
  88 .  {* The relocation was performed, but may not be ok - presently
  89 .     generated only when linking i960 coff files with i960 b.out
  90 .     symbols.  If this type is returned, the error_message argument
  91 .     to bfd_perform_relocation will be set.  *}
  92 .  bfd_reloc_dangerous
  93 . }
  94 . bfd_reloc_status_type;
  95 .
  96 .
  97 .typedef struct reloc_cache_entry
  98 .{
  99 .  {* A pointer into the canonical table of pointers.  *}
 100 .  struct bfd_symbol **sym_ptr_ptr;
 101 .
 102 .  {* offset in section.  *}
 103 .  bfd_size_type address;
 104 .
 105 .  {* addend for relocation value.  *}
 106 .  bfd_vma addend;
 107 .
 108 .  {* Pointer to how to perform the required relocation.  *}
 109 .  reloc_howto_type *howto;
 110 .
 111 .}
 112 .arelent;
 113 .
 114 */
 115
 116 /*
 117 DESCRIPTION
 118
 119         Here is a description of each of the fields within an <<arelent>>:
 120
 121         o <<sym_ptr_ptr>>
 122
 123         The symbol table pointer points to a pointer to the symbol
 124         associated with the relocation request.  It is the pointer
 125         into the table returned by the back end's
 126         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 127         referenced through a pointer to a pointer so that tools like
 128         the linker can fix up all the symbols of the same name by
 129         modifying only one pointer. The relocation routine looks in
 130         the symbol and uses the base of the section the symbol is
 131         attached to and the value of the symbol as the initial
 132         relocation offset. If the symbol pointer is zero, then the
 133         section provided is looked up.
 134
 135         o <<address>>
 136
 137         The <<address>> field gives the offset in bytes from the base of
 138         the section data which owns the relocation record to the first
 139         byte of relocatable information. The actual data relocated
 140         will be relative to this point; for example, a relocation
 141         type which modifies the bottom two bytes of a four byte word
 142         would not touch the first byte pointed to in a big endian
 143         world.
 144
 145         o <<addend>>
 146
 147         The <<addend>> is a value provided by the back end to be added (!)
 148         to the relocation offset. Its interpretation is dependent upon
 149         the howto. For example, on the 68k the code:
 150
 151 |        char foo[];
 152 |        main()
 153 |                {
 154 |                return foo[0x12345678];
 155 |                }
 156
 157         Could be compiled into:
 158
 159 |        linkw fp,#-4
 160 |        moveb @@#12345678,d0
 161 |        extbl d0
 162 |        unlk fp
 163 |        rts
 164
 165         This could create a reloc pointing to <<foo>>, but leave the
 166         offset in the data, something like:
 167
 168 |RELOCATION RECORDS FOR [.text]:
 169 |offset   type      value
 170 |00000006 32        _foo
 171 |
 172 |00000000 4e56 fffc          ; linkw fp,#-4
 173 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 174 |0000000a 49c0               ; extbl d0
 175 |0000000c 4e5e               ; unlk fp
 176 |0000000e 4e75               ; rts
 177
 178         Using coff and an 88k, some instructions don't have enough
 179         space in them to represent the full address range, and
 180         pointers have to be loaded in two parts. So you'd get something like:
 181
 182 |        or.u     r13,r0,hi16(_foo+0x12345678)
 183 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 184 |        jmp      r1
 185
 186         This should create two relocs, both pointing to <<_foo>>, and with
 187         0x12340000 in their addend field. The data would consist of:
 188
 189 |RELOCATION RECORDS FOR [.text]:
 190 |offset   type      value
 191 |00000002 HVRT16    _foo+0x12340000
 192 |00000006 LVRT16    _foo+0x12340000
 193 |
 194 |00000000 5da05678           ; or.u r13,r0,0x5678
 195 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 196 |00000008 f400c001           ; jmp r1
 197
 198         The relocation routine digs out the value from the data, adds
 199         it to the addend to get the original offset, and then adds the
 200         value of <<_foo>>. Note that all 32 bits have to be kept around
 201         somewhere, to cope with carry from bit 15 to bit 16.
 202
 203         One further example is the sparc and the a.out format. The
 204         sparc has a similar problem to the 88k, in that some
 205         instructions don't have room for an entire offset, but on the
 206         sparc the parts are created in odd sized lumps. The designers of
 207         the a.out format chose to not use the data within the section
 208         for storing part of the offset; all the offset is kept within
 209         the reloc. Anything in the data should be ignored.
 210
 211 |        save %sp,-112,%sp
 212 |        sethi %hi(_foo+0x12345678),%g2
 213 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 214 |        ret
 215 |        restore
 216
 217         Both relocs contain a pointer to <<foo>>, and the offsets
 218         contain junk.
 219
 220 |RELOCATION RECORDS FOR [.text]:
 221 |offset   type      value
 222 |00000004 HI22      _foo+0x12345678
 223 |00000008 LO10      _foo+0x12345678
 224 |
 225 |00000000 9de3bf90     ; save %sp,-112,%sp
 226 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 227 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 228 |0000000c 81c7e008     ; ret
 229 |00000010 81e80000     ; restore
 230
 231         o <<howto>>
 232
 233         The <<howto>> field can be imagined as a
 234         relocation instruction. It is a pointer to a structure which
 235         contains information on what to do with all of the other
 236         information in the reloc record and data section. A back end
 237         would normally have a relocation instruction set and turn
 238         relocations into pointers to the correct structure on input -
 239         but it would be possible to create each howto field on demand.
 240
 241 */
 242
 243 /*
 244 SUBSUBSECTION
 245         <<enum complain_overflow>>
 246
 247         Indicates what sort of overflow checking should be done when
 248         performing a relocation.
 249
 250 CODE_FRAGMENT
 251 .
 252 .enum complain_overflow
 253 .{
 254 .  {* Do not complain on overflow.  *}
 255 .  complain_overflow_dont,
 256 .
 257 .  {* Complain if the value overflows when considered as a signed
 258 .     number one bit larger than the field.  ie. A bitfield of N bits
 259 .     is allowed to represent -2**n to 2**n-1.  *}
 260 .  complain_overflow_bitfield,
 261 .
 262 .  {* Complain if the value overflows when considered as a signed
 263 .     number.  *}
 264 .  complain_overflow_signed,
 265 .
 266 .  {* Complain if the value overflows when considered as an
 267 .     unsigned number.  *}
 268 .  complain_overflow_unsigned
 269 .};
 270
 271 */
 272
 273 /*
 274 SUBSUBSECTION
 275         <<reloc_howto_type>>
 276
 277         The <<reloc_howto_type>> is a structure which contains all the
 278         information that libbfd needs to know to tie up a back end's data.
 279
 280 CODE_FRAGMENT
 281 .struct bfd_symbol;             {* Forward declaration.  *}
 282 .
 283 .struct reloc_howto_struct
 284 .{
 285 .  {*  The type field has mainly a documentary use - the back end can
 286 .      do what it wants with it, though normally the back end's
 287 .      external idea of what a reloc number is stored
 288 .      in this field.  For example, a PC relative word relocation
 289 .      in a coff environment has the type 023 - because that's
 290 .      what the outside world calls a R_PCRWORD reloc.  *}
 291 .  unsigned int type;
 292 .
 293 .  {*  The value the final relocation is shifted right by.  This drops
 294 .      unwanted data from the relocation.  *}
 295 .  unsigned int rightshift;
 296 .
 297 .  {*  The size of the item to be relocated.  This is *not* a
 298 .      power-of-two measure.  To get the number of bytes operated
 299 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 300 .  int size;
 301 .
 302 .  {*  The number of bits in the item to be relocated.  This is used
 303 .      when doing overflow checking.  *}
 304 .  unsigned int bitsize;
 305 .
 306 .  {*  The relocation is relative to the field being relocated.  *}
 307 .  bfd_boolean pc_relative;
 308 .
 309 .  {*  The bit position of the reloc value in the destination.
 310 .      The relocated value is left shifted by this amount.  *}
 311 .  unsigned int bitpos;
 312 .
 313 .  {* What type of overflow error should be checked for when
 314 .     relocating.  *}
 315 .  enum complain_overflow complain_on_overflow;
 316 .
 317 .  {* If this field is non null, then the supplied function is
 318 .     called rather than the normal function.  This allows really
 319 .     strange relocation methods to be accommodated (e.g., i960 callj
 320 .     instructions).  *}
 321 .  bfd_reloc_status_type (*special_function)
 322 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 323 .     bfd *, char **);
 324 .
 325 .  {* The textual name of the relocation type.  *}
 326 .  char *name;
 327 .
 328 .  {* Some formats record a relocation addend in the section contents
 329 .     rather than with the relocation.  For ELF formats this is the
 330 .     distinction between USE_REL and USE_RELA (though the code checks
 331 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 332 .     addend is recorded with the section contents; when performing a
 333 .     partial link (ld -r) the section contents (the data) will be
 334 .     modified.  The value of this field is FALSE if addends are
 335 .     recorded with the relocation (in arelent.addend); when performing
 336 .     a partial link the relocation will be modified.
 337 .     All relocations for all ELF USE_RELA targets should set this field
 338 .     to FALSE (values of TRUE should be looked on with suspicion).
 339 .     However, the converse is not true: not all relocations of all ELF
 340 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 341 .     to each particular target.  For relocs that aren't used in partial
 342 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 343 .  bfd_boolean partial_inplace;
 344 .
 345 .  {* src_mask selects the part of the instruction (or data) to be used
 346 .     in the relocation sum.  If the target relocations don't have an
 347 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 348 .     dst_mask to extract the addend from the section contents.  If
 349 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 350 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 351 .     bogus as in those cases the value in the dst_mask part of the
 352 .     section contents should be treated as garbage.  *}
 353 .  bfd_vma src_mask;
 354 .
 355 .  {* dst_mask selects which parts of the instruction (or data) are
 356 .     replaced with a relocated value.  *}
 357 .  bfd_vma dst_mask;
 358 .
 359 .  {* When some formats create PC relative instructions, they leave
 360 .     the value of the pc of the place being relocated in the offset
 361 .     slot of the instruction, so that a PC relative relocation can
 362 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 363 .     Some formats leave the displacement part of an instruction
 364 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 365 .  bfd_boolean pcrel_offset;
 366 .};
 367 .
 368 */
 369
 370 /*
 371 FUNCTION
 372         The HOWTO Macro
 373
 374 DESCRIPTION
 375         The HOWTO define is horrible and will go away.
 376
 377 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 378 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 379
 380 DESCRIPTION
 381         And will be replaced with the totally magic way. But for the
 382         moment, we are compatible, so do it this way.
 383
 384 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 385 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 386 .         NAME, FALSE, 0, 0, IN)
 387 .
 388
 389 DESCRIPTION
 390         This is used to fill in an empty howto entry in an array.
 391
 392 .#define EMPTY_HOWTO(C) \
 393 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 394 .         NULL, FALSE, 0, 0, FALSE)
 395 .
 396
 397 DESCRIPTION
 398         Helper routine to turn a symbol into a relocation value.
 399
 400 .#define HOWTO_PREPARE(relocation, symbol)               \
 401 .  {                                                     \
 402 .    if (symbol != NULL)                                 \
 403 .      {                                                 \
 404 .        if (bfd_is_com_section (symbol->section))       \
 405 .          {                                             \
 406 .            relocation = 0;                             \
 407 .          }                                             \
 408 .        else                                            \
 409 .          {                                             \
 410 .            relocation = symbol->value;                 \
 411 .          }                                             \
 412 .      }                                                 \
 413 .  }
 414 .
 415 */
 416
 417 /*
 418 FUNCTION
 419         bfd_get_reloc_size
 420
 421 SYNOPSIS
 422         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 423
 424 DESCRIPTION
 425         For a reloc_howto_type that operates on a fixed number of bytes,
 426         this returns the number of bytes operated on.
 427  */
 428
 429 unsigned int
 430 bfd_get_reloc_size (reloc_howto_type *howto)
 431 {
 432   switch (howto->size)
 433     {
 434     case 0: return 1;
 435     case 1: return 2;
 436     case 2: return 4;
 437     case 3: return 0;
 438     case 4: return 8;
 439     case 8: return 16;
 440     case -2: return 4;
 441     default: abort ();
 442     }
 443 }
 444
 445 /*
 446 TYPEDEF
 447         arelent_chain
 448
 449 DESCRIPTION
 450
 451         How relocs are tied together in an <<asection>>:
 452
 453 .typedef struct relent_chain
 454 .{
 455 .  arelent relent;
 456 .  struct relent_chain *next;
 457 .}
 458 .arelent_chain;
 459 .
 460 */
 461
 462 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 463 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 464
 465 /*
 466 FUNCTION
 467         bfd_check_overflow
 468
 469 SYNOPSIS
 470         bfd_reloc_status_type bfd_check_overflow
 471           (enum complain_overflow how,
 472            unsigned int bitsize,
 473            unsigned int rightshift,
 474            unsigned int addrsize,
 475            bfd_vma relocation);
 476
 477 DESCRIPTION
 478         Perform overflow checking on @var{relocation} which has
 479         @var{bitsize} significant bits and will be shifted right by
 480         @var{rightshift} bits, on a machine with addresses containing
 481         @var{addrsize} significant bits.  The result is either of
 482         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 483
 484 */
 485
 486 bfd_reloc_status_type
 487 bfd_check_overflow (enum complain_overflow how,
 488                     unsigned int bitsize,
 489                     unsigned int rightshift,
 490                     unsigned int addrsize,
 491                     bfd_vma relocation)
 492 {
 493   bfd_vma fieldmask, addrmask, signmask, ss, a;
 494   bfd_reloc_status_type flag = bfd_reloc_ok;
 495
 496   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 497      we'll be permissive: extra bits in the field mask will
 498      automatically extend the address mask for purposes of the
 499      overflow check.  */
 500   fieldmask = N_ONES (bitsize);
 501   signmask = ~fieldmask;
 502   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 503   a = (relocation & addrmask) >> rightshift;
 504
 505   switch (how)
 506     {
 507     case complain_overflow_dont:
 508       break;
 509
 510     case complain_overflow_signed:
 511       /* If any sign bits are set, all sign bits must be set.  That
 512          is, A must be a valid negative address after shifting.  */
 513       signmask = ~ (fieldmask >> 1);
 514       /* Fall thru */
 515
 516     case complain_overflow_bitfield:
 517       /* Bitfields are sometimes signed, sometimes unsigned.  We
 518          explicitly allow an address wrap too, which means a bitfield
 519          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 520          if the value has some, but not all, bits set outside the
 521          field.  */
 522       ss = a & signmask;
 523       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 524         flag = bfd_reloc_overflow;
 525       break;
 526
 527     case complain_overflow_unsigned:
 528       /* We have an overflow if the address does not fit in the field.  */
 529       if ((a & signmask) != 0)
 530         flag = bfd_reloc_overflow;
 531       break;
 532
 533     default:
 534       abort ();
 535     }
 536
 537   return flag;
 538 }
 539
 540 /*
 541 FUNCTION
 542         bfd_perform_relocation
 543
 544 SYNOPSIS
 545         bfd_reloc_status_type bfd_perform_relocation
 546           (bfd *abfd,
 547            arelent *reloc_entry,
 548            void *data,
 549            asection *input_section,
 550            bfd *output_bfd,
 551            char **error_message);
 552
 553 DESCRIPTION
 554         If @var{output_bfd} is supplied to this function, the
 555         generated image will be relocatable; the relocations are
 556         copied to the output file after they have been changed to
 557         reflect the new state of the world. There are two ways of
 558         reflecting the results of partial linkage in an output file:
 559         by modifying the output data in place, and by modifying the
 560         relocation record.  Some native formats (e.g., basic a.out and
 561         basic coff) have no way of specifying an addend in the
 562         relocation type, so the addend has to go in the output data.
 563         This is no big deal since in these formats the output data
 564         slot will always be big enough for the addend. Complex reloc
 565         types with addends were invented to solve just this problem.
 566         The @var{error_message} argument is set to an error message if
 567         this return @code{bfd_reloc_dangerous}.
 568
 569 */
 570
 571 bfd_reloc_status_type
 572 bfd_perform_relocation (bfd *abfd,
 573                         arelent *reloc_entry,
 574                         void *data,
 575                         asection *input_section,
 576                         bfd *output_bfd,
 577                         char **error_message)
 578 {
 579   bfd_vma relocation;
 580   bfd_reloc_status_type flag = bfd_reloc_ok;
 581   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 582   bfd_vma output_base = 0;
 583   reloc_howto_type *howto = reloc_entry->howto;
 584   asection *reloc_target_output_section;
 585   asymbol *symbol;
 586
 587   symbol = *(reloc_entry->sym_ptr_ptr);
 588   if (bfd_is_abs_section (symbol->section)
 589       && output_bfd != NULL)
 590     {
 591       reloc_entry->address += input_section->output_offset;
 592       return bfd_reloc_ok;
 593     }
 594
 595   /* If we are not producing relocatable output, return an error if
 596      the symbol is not defined.  An undefined weak symbol is
 597      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 598   if (bfd_is_und_section (symbol->section)
 599       && (symbol->flags & BSF_WEAK) == 0
 600       && output_bfd == NULL)
 601     flag = bfd_reloc_undefined;
 602
 603   /* If there is a function supplied to handle this relocation type,
 604      call it.  It'll return `bfd_reloc_continue' if further processing
 605      can be done.  */
 606   if (howto->special_function)
 607     {
 608       bfd_reloc_status_type cont;
 609       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 610                                       input_section, output_bfd,
 611                                       error_message);
 612       if (cont != bfd_reloc_continue)
 613         return cont;
 614     }
 615
 616   /* Is the address of the relocation really within the section?  */
 617   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 618     return bfd_reloc_outofrange;
 619
 620   /* Work out which section the relocation is targeted at and the
 621      initial relocation command value.  */
 622
 623   /* Get symbol value.  (Common symbols are special.)  */
 624   if (bfd_is_com_section (symbol->section))
 625     relocation = 0;
 626   else
 627     relocation = symbol->value;
 628
 629   reloc_target_output_section = symbol->section->output_section;
 630
 631   /* Convert input-section-relative symbol value to absolute.  */
 632   if ((output_bfd && ! howto->partial_inplace)
 633       || reloc_target_output_section == NULL)
 634     output_base = 0;
 635   else
 636     output_base = reloc_target_output_section->vma;
 637
 638   relocation += output_base + symbol->section->output_offset;
 639
 640   /* Add in supplied addend.  */
 641   relocation += reloc_entry->addend;
 642
 643   /* Here the variable relocation holds the final address of the
 644      symbol we are relocating against, plus any addend.  */
 645
 646   if (howto->pc_relative)
 647     {
 648       /* This is a PC relative relocation.  We want to set RELOCATION
 649          to the distance between the address of the symbol and the
 650          location.  RELOCATION is already the address of the symbol.
 651
 652          We start by subtracting the address of the section containing
 653          the location.
 654
 655          If pcrel_offset is set, we must further subtract the position
 656          of the location within the section.  Some targets arrange for
 657          the addend to be the negative of the position of the location
 658          within the section; for example, i386-aout does this.  For
 659          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 660          include the position of the location; for example, m88kbcs,
 661          or ELF.  For those targets, pcrel_offset is TRUE.
 662
 663          If we are producing relocatable output, then we must ensure
 664          that this reloc will be correctly computed when the final
 665          relocation is done.  If pcrel_offset is FALSE we want to wind
 666          up with the negative of the location within the section,
 667          which means we must adjust the existing addend by the change
 668          in the location within the section.  If pcrel_offset is TRUE
 669          we do not want to adjust the existing addend at all.
 670
 671          FIXME: This seems logical to me, but for the case of
 672          producing relocatable output it is not what the code
 673          actually does.  I don't want to change it, because it seems
 674          far too likely that something will break.  */
 675
 676       relocation -=
 677         input_section->output_section->vma + input_section->output_offset;
 678
 679       if (howto->pcrel_offset)
 680         relocation -= reloc_entry->address;
 681     }
 682
 683   if (output_bfd != NULL)
 684     {
 685       if (! howto->partial_inplace)
 686         {
 687           /* This is a partial relocation, and we want to apply the relocation
 688              to the reloc entry rather than the raw data. Modify the reloc
 689              inplace to reflect what we now know.  */
 690           reloc_entry->addend = relocation;
 691           reloc_entry->address += input_section->output_offset;
 692           return flag;
 693         }
 694       else
 695         {
 696           /* This is a partial relocation, but inplace, so modify the
 697              reloc record a bit.
 698
 699              If we've relocated with a symbol with a section, change
 700              into a ref to the section belonging to the symbol.  */
 701
 702           reloc_entry->address += input_section->output_offset;
 703
 704           /* WTF?? */
 705           if (abfd->xvec->flavour == bfd_target_coff_flavour
 706               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 707               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 708             {
 709               /* For m68k-coff, the addend was being subtracted twice during
 710                  relocation with -r.  Removing the line below this comment
 711                  fixes that problem; see PR 2953.
 712
 713 However, Ian wrote the following, regarding removing the line below,
 714 which explains why it is still enabled:  --djm
 715
 716 If you put a patch like that into BFD you need to check all the COFF
 717 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 718 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 719 problem in a different way.  There may very well be a reason that the
 720 code works as it does.
 721
 722 Hmmm.  The first obvious point is that bfd_perform_relocation should
 723 not have any tests that depend upon the flavour.  It's seem like
 724 entirely the wrong place for such a thing.  The second obvious point
 725 is that the current code ignores the reloc addend when producing
 726 relocatable output for COFF.  That's peculiar.  In fact, I really
 727 have no idea what the point of the line you want to remove is.
 728
 729 A typical COFF reloc subtracts the old value of the symbol and adds in
 730 the new value to the location in the object file (if it's a pc
 731 relative reloc it adds the difference between the symbol value and the
 732 location).  When relocating we need to preserve that property.
 733
 734 BFD handles this by setting the addend to the negative of the old
 735 value of the symbol.  Unfortunately it handles common symbols in a
 736 non-standard way (it doesn't subtract the old value) but that's a
 737 different story (we can't change it without losing backward
 738 compatibility with old object files) (coff-i386 does subtract the old
 739 value, to be compatible with existing coff-i386 targets, like SCO).
 740
 741 So everything works fine when not producing relocatable output.  When
 742 we are producing relocatable output, logically we should do exactly
 743 what we do when not producing relocatable output.  Therefore, your
 744 patch is correct.  In fact, it should probably always just set
 745 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 746 add the value into the object file.  This won't hurt the COFF code,
 747 which doesn't use the addend; I'm not sure what it will do to other
 748 formats (the thing to check for would be whether any formats both use
 749 the addend and set partial_inplace).
 750
 751 When I wanted to make coff-i386 produce relocatable output, I ran
 752 into the problem that you are running into: I wanted to remove that
 753 line.  Rather than risk it, I made the coff-i386 relocs use a special
 754 function; it's coff_i386_reloc in coff-i386.c.  The function
 755 specifically adds the addend field into the object file, knowing that
 756 bfd_perform_relocation is not going to.  If you remove that line, then
 757 coff-i386.c will wind up adding the addend field in twice.  It's
 758 trivial to fix; it just needs to be done.
 759
 760 The problem with removing the line is just that it may break some
 761 working code.  With BFD it's hard to be sure of anything.  The right
 762 way to deal with this is simply to build and test at least all the
 763 supported COFF targets.  It should be straightforward if time and disk
 764 space consuming.  For each target:
 765     1) build the linker
 766     2) generate some executable, and link it using -r (I would
 767        probably use paranoia.o and link against newlib/libc.a, which
 768        for all the supported targets would be available in
 769        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 770     3) make the change to reloc.c
 771     4) rebuild the linker
 772     5) repeat step 2
 773     6) if the resulting object files are the same, you have at least
 774        made it no worse
 775     7) if they are different you have to figure out which version is
 776        right
 777 */
 778               relocation -= reloc_entry->addend;
 779               reloc_entry->addend = 0;
 780             }
 781           else
 782             {
 783               reloc_entry->addend = relocation;
 784             }
 785         }
 786     }
 787
 788   /* FIXME: This overflow checking is incomplete, because the value
 789      might have overflowed before we get here.  For a correct check we
 790      need to compute the value in a size larger than bitsize, but we
 791      can't reasonably do that for a reloc the same size as a host
 792      machine word.
 793      FIXME: We should also do overflow checking on the result after
 794      adding in the value contained in the object file.  */
 795   if (howto->complain_on_overflow != complain_overflow_dont
 796       && flag == bfd_reloc_ok)
 797     flag = bfd_check_overflow (howto->complain_on_overflow,
 798                                howto->bitsize,
 799                                howto->rightshift,
 800                                bfd_arch_bits_per_address (abfd),
 801                                relocation);
 802
 803   /* Either we are relocating all the way, or we don't want to apply
 804      the relocation to the reloc entry (probably because there isn't
 805      any room in the output format to describe addends to relocs).  */
 806
 807   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 808      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 809      following program:
 810
 811      struct str
 812      {
 813        unsigned int i0;
 814      } s = { 0 };
 815
 816      int
 817      main ()
 818      {
 819        unsigned long x;
 820
 821        x = 0x100000000;
 822        x <<= (unsigned long) s.i0;
 823        if (x == 0)
 824          printf ("failed\n");
 825        else
 826          printf ("succeeded (%lx)\n", x);
 827      }
 828      */
 829
 830   relocation >>= (bfd_vma) howto->rightshift;
 831
 832   /* Shift everything up to where it's going to be used.  */
 833   relocation <<= (bfd_vma) howto->bitpos;
 834
 835   /* Wait for the day when all have the mask in them.  */
 836
 837   /* What we do:
 838      i instruction to be left alone
 839      o offset within instruction
 840      r relocation offset to apply
 841      S src mask
 842      D dst mask
 843      N ~dst mask
 844      A part 1
 845      B part 2
 846      R result
 847
 848      Do this:
 849      ((  i i i i i o o o o o  from bfd_get<size>
 850      and           S S S S S) to get the size offset we want
 851      +   r r r r r r r r r r) to get the final value to place
 852      and           D D D D D  to chop to right size
 853      -----------------------
 854      =             A A A A A
 855      And this:
 856      (   i i i i i o o o o o  from bfd_get<size>
 857      and N N N N N          ) get instruction
 858      -----------------------
 859      =   B B B B B
 860
 861      And then:
 862      (   B B B B B
 863      or            A A A A A)
 864      -----------------------
 865      =   R R R R R R R R R R  put into bfd_put<size>
 866      */
 867
 868 #define DOIT(x) \
 869   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 870
 871   switch (howto->size)
 872     {
 873     case 0:
 874       {
 875         char x = bfd_get_8 (abfd, (char *) data + octets);
 876         DOIT (x);
 877         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 878       }
 879       break;
 880
 881     case 1:
 882       {
 883         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 884         DOIT (x);
 885         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 886       }
 887       break;
 888     case 2:
 889       {
 890         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 891         DOIT (x);
 892         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 893       }
 894       break;
 895     case -2:
 896       {
 897         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 898         relocation = -relocation;
 899         DOIT (x);
 900         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 901       }
 902       break;
 903
 904     case -1:
 905       {
 906         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 907         relocation = -relocation;
 908         DOIT (x);
 909         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 910       }
 911       break;
 912
 913     case 3:
 914       /* Do nothing */
 915       break;
 916
 917     case 4:
 918 #ifdef BFD64
 919       {
 920         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 921         DOIT (x);
 922         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 923       }
 924 #else
 925       abort ();
 926 #endif
 927       break;
 928     default:
 929       return bfd_reloc_other;
 930     }
 931
 932   return flag;
 933 }
 934
 935 /*
 936 FUNCTION
 937         bfd_install_relocation
 938
 939 SYNOPSIS
 940         bfd_reloc_status_type bfd_install_relocation
 941           (bfd *abfd,
 942            arelent *reloc_entry,
 943            void *data, bfd_vma data_start,
 944            asection *input_section,
 945            char **error_message);
 946
 947 DESCRIPTION
 948         This looks remarkably like <<bfd_perform_relocation>>, except it
 949         does not expect that the section contents have been filled in.
 950         I.e., it's suitable for use when creating, rather than applying
 951         a relocation.
 952
 953         For now, this function should be considered reserved for the
 954         assembler.
 955 */
 956
 957 bfd_reloc_status_type
 958 bfd_install_relocation (bfd *abfd,
 959                         arelent *reloc_entry,
 960                         void *data_start,
 961                         bfd_vma data_start_offset,
 962                         asection *input_section,
 963                         char **error_message)
 964 {
 965   bfd_vma relocation;
 966   bfd_reloc_status_type flag = bfd_reloc_ok;
 967   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 968   bfd_vma output_base = 0;
 969   reloc_howto_type *howto = reloc_entry->howto;
 970   asection *reloc_target_output_section;
 971   asymbol *symbol;
 972   bfd_byte *data;
 973
 974   symbol = *(reloc_entry->sym_ptr_ptr);
 975   if (bfd_is_abs_section (symbol->section))
 976     {
 977       reloc_entry->address += input_section->output_offset;
 978       return bfd_reloc_ok;
 979     }
 980
 981   /* If there is a function supplied to handle this relocation type,
 982      call it.  It'll return `bfd_reloc_continue' if further processing
 983      can be done.  */
 984   if (howto->special_function)
 985     {
 986       bfd_reloc_status_type cont;
 987
 988       /* XXX - The special_function calls haven't been fixed up to deal
 989          with creating new relocations and section contents.  */
 990       cont = howto->special_function (abfd, reloc_entry, symbol,
 991                                       /* XXX - Non-portable! */
 992                                       ((bfd_byte *) data_start
 993                                        - data_start_offset),
 994                                       input_section, abfd, error_message);
 995       if (cont != bfd_reloc_continue)
 996         return cont;
 997     }
 998
 999   /* Is the address of the relocation really within the section?  */
1000   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1001     return bfd_reloc_outofrange;
1002
1003   /* Work out which section the relocation is targeted at and the
1004      initial relocation command value.  */
1005
1006   /* Get symbol value.  (Common symbols are special.)  */
1007   if (bfd_is_com_section (symbol->section))
1008     relocation = 0;
1009   else
1010     relocation = symbol->value;
1011
1012   reloc_target_output_section = symbol->section->output_section;
1013
1014   /* Convert input-section-relative symbol value to absolute.  */
1015   if (! howto->partial_inplace)
1016     output_base = 0;
1017   else
1018     output_base = reloc_target_output_section->vma;
1019
1020   relocation += output_base + symbol->section->output_offset;
1021
1022   /* Add in supplied addend.  */
1023   relocation += reloc_entry->addend;
1024
1025   /* Here the variable relocation holds the final address of the
1026      symbol we are relocating against, plus any addend.  */
1027
1028   if (howto->pc_relative)
1029     {
1030       /* This is a PC relative relocation.  We want to set RELOCATION
1031          to the distance between the address of the symbol and the
1032          location.  RELOCATION is already the address of the symbol.
1033
1034          We start by subtracting the address of the section containing
1035          the location.
1036
1037          If pcrel_offset is set, we must further subtract the position
1038          of the location within the section.  Some targets arrange for
1039          the addend to be the negative of the position of the location
1040          within the section; for example, i386-aout does this.  For
1041          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1042          include the position of the location; for example, m88kbcs,
1043          or ELF.  For those targets, pcrel_offset is TRUE.
1044
1045          If we are producing relocatable output, then we must ensure
1046          that this reloc will be correctly computed when the final
1047          relocation is done.  If pcrel_offset is FALSE we want to wind
1048          up with the negative of the location within the section,
1049          which means we must adjust the existing addend by the change
1050          in the location within the section.  If pcrel_offset is TRUE
1051          we do not want to adjust the existing addend at all.
1052
1053          FIXME: This seems logical to me, but for the case of
1054          producing relocatable output it is not what the code
1055          actually does.  I don't want to change it, because it seems
1056          far too likely that something will break.  */
1057
1058       relocation -=
1059         input_section->output_section->vma + input_section->output_offset;
1060
1061       if (howto->pcrel_offset && howto->partial_inplace)
1062         relocation -= reloc_entry->address;
1063     }
1064
1065   if (! howto->partial_inplace)
1066     {
1067       /* This is a partial relocation, and we want to apply the relocation
1068          to the reloc entry rather than the raw data. Modify the reloc
1069          inplace to reflect what we now know.  */
1070       reloc_entry->addend = relocation;
1071       reloc_entry->address += input_section->output_offset;
1072       return flag;
1073     }
1074   else
1075     {
1076       /* This is a partial relocation, but inplace, so modify the
1077          reloc record a bit.
1078
1079          If we've relocated with a symbol with a section, change
1080          into a ref to the section belonging to the symbol.  */
1081       reloc_entry->address += input_section->output_offset;
1082
1083       /* WTF?? */
1084       if (abfd->xvec->flavour == bfd_target_coff_flavour
1085           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1086           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1087         {
1088
1089           /* For m68k-coff, the addend was being subtracted twice during
1090              relocation with -r.  Removing the line below this comment
1091              fixes that problem; see PR 2953.
1092
1093 However, Ian wrote the following, regarding removing the line below,
1094 which explains why it is still enabled:  --djm
1095
1096 If you put a patch like that into BFD you need to check all the COFF
1097 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1098 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1099 problem in a different way.  There may very well be a reason that the
1100 code works as it does.
1101
1102 Hmmm.  The first obvious point is that bfd_install_relocation should
1103 not have any tests that depend upon the flavour.  It's seem like
1104 entirely the wrong place for such a thing.  The second obvious point
1105 is that the current code ignores the reloc addend when producing
1106 relocatable output for COFF.  That's peculiar.  In fact, I really
1107 have no idea what the point of the line you want to remove is.
1108
1109 A typical COFF reloc subtracts the old value of the symbol and adds in
1110 the new value to the location in the object file (if it's a pc
1111 relative reloc it adds the difference between the symbol value and the
1112 location).  When relocating we need to preserve that property.
1113
1114 BFD handles this by setting the addend to the negative of the old
1115 value of the symbol.  Unfortunately it handles common symbols in a
1116 non-standard way (it doesn't subtract the old value) but that's a
1117 different story (we can't change it without losing backward
1118 compatibility with old object files) (coff-i386 does subtract the old
1119 value, to be compatible with existing coff-i386 targets, like SCO).
1120
1121 So everything works fine when not producing relocatable output.  When
1122 we are producing relocatable output, logically we should do exactly
1123 what we do when not producing relocatable output.  Therefore, your
1124 patch is correct.  In fact, it should probably always just set
1125 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1126 add the value into the object file.  This won't hurt the COFF code,
1127 which doesn't use the addend; I'm not sure what it will do to other
1128 formats (the thing to check for would be whether any formats both use
1129 the addend and set partial_inplace).
1130
1131 When I wanted to make coff-i386 produce relocatable output, I ran
1132 into the problem that you are running into: I wanted to remove that
1133 line.  Rather than risk it, I made the coff-i386 relocs use a special
1134 function; it's coff_i386_reloc in coff-i386.c.  The function
1135 specifically adds the addend field into the object file, knowing that
1136 bfd_install_relocation is not going to.  If you remove that line, then
1137 coff-i386.c will wind up adding the addend field in twice.  It's
1138 trivial to fix; it just needs to be done.
1139
1140 The problem with removing the line is just that it may break some
1141 working code.  With BFD it's hard to be sure of anything.  The right
1142 way to deal with this is simply to build and test at least all the
1143 supported COFF targets.  It should be straightforward if time and disk
1144 space consuming.  For each target:
1145     1) build the linker
1146     2) generate some executable, and link it using -r (I would
1147        probably use paranoia.o and link against newlib/libc.a, which
1148        for all the supported targets would be available in
1149        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1150     3) make the change to reloc.c
1151     4) rebuild the linker
1152     5) repeat step 2
1153     6) if the resulting object files are the same, you have at least
1154        made it no worse
1155     7) if they are different you have to figure out which version is
1156        right.  */
1157           relocation -= reloc_entry->addend;
1158           /* FIXME: There should be no target specific code here...  */
1159           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1160             reloc_entry->addend = 0;
1161         }
1162       else
1163         {
1164           reloc_entry->addend = relocation;
1165         }
1166     }
1167
1168   /* FIXME: This overflow checking is incomplete, because the value
1169      might have overflowed before we get here.  For a correct check we
1170      need to compute the value in a size larger than bitsize, but we
1171      can't reasonably do that for a reloc the same size as a host
1172      machine word.
1173      FIXME: We should also do overflow checking on the result after
1174      adding in the value contained in the object file.  */
1175   if (howto->complain_on_overflow != complain_overflow_dont)
1176     flag = bfd_check_overflow (howto->complain_on_overflow,
1177                                howto->bitsize,
1178                                howto->rightshift,
1179                                bfd_arch_bits_per_address (abfd),
1180                                relocation);
1181
1182   /* Either we are relocating all the way, or we don't want to apply
1183      the relocation to the reloc entry (probably because there isn't
1184      any room in the output format to describe addends to relocs).  */
1185
1186   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1187      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1188      following program:
1189
1190      struct str
1191      {
1192        unsigned int i0;
1193      } s = { 0 };
1194
1195      int
1196      main ()
1197      {
1198        unsigned long x;
1199
1200        x = 0x100000000;
1201        x <<= (unsigned long) s.i0;
1202        if (x == 0)
1203          printf ("failed\n");
1204        else
1205          printf ("succeeded (%lx)\n", x);
1206      }
1207      */
1208
1209   relocation >>= (bfd_vma) howto->rightshift;
1210
1211   /* Shift everything up to where it's going to be used.  */
1212   relocation <<= (bfd_vma) howto->bitpos;
1213
1214   /* Wait for the day when all have the mask in them.  */
1215
1216   /* What we do:
1217      i instruction to be left alone
1218      o offset within instruction
1219      r relocation offset to apply
1220      S src mask
1221      D dst mask
1222      N ~dst mask
1223      A part 1
1224      B part 2
1225      R result
1226
1227      Do this:
1228      ((  i i i i i o o o o o  from bfd_get<size>
1229      and           S S S S S) to get the size offset we want
1230      +   r r r r r r r r r r) to get the final value to place
1231      and           D D D D D  to chop to right size
1232      -----------------------
1233      =             A A A A A
1234      And this:
1235      (   i i i i i o o o o o  from bfd_get<size>
1236      and N N N N N          ) get instruction
1237      -----------------------
1238      =   B B B B B
1239
1240      And then:
1241      (   B B B B B
1242      or            A A A A A)
1243      -----------------------
1244      =   R R R R R R R R R R  put into bfd_put<size>
1245      */
1246
1247 #define DOIT(x) \
1248   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1249
1250   data = (bfd_byte *) data_start + (octets - data_start_offset);
1251
1252   switch (howto->size)
1253     {
1254     case 0:
1255       {
1256         char x = bfd_get_8 (abfd, data);
1257         DOIT (x);
1258         bfd_put_8 (abfd, x, data);
1259       }
1260       break;
1261
1262     case 1:
1263       {
1264         short x = bfd_get_16 (abfd, data);
1265         DOIT (x);
1266         bfd_put_16 (abfd, (bfd_vma) x, data);
1267       }
1268       break;
1269     case 2:
1270       {
1271         long x = bfd_get_32 (abfd, data);
1272         DOIT (x);
1273         bfd_put_32 (abfd, (bfd_vma) x, data);
1274       }
1275       break;
1276     case -2:
1277       {
1278         long x = bfd_get_32 (abfd, data);
1279         relocation = -relocation;
1280         DOIT (x);
1281         bfd_put_32 (abfd, (bfd_vma) x, data);
1282       }
1283       break;
1284
1285     case 3:
1286       /* Do nothing */
1287       break;
1288
1289     case 4:
1290       {
1291         bfd_vma x = bfd_get_64 (abfd, data);
1292         DOIT (x);
1293         bfd_put_64 (abfd, x, data);
1294       }
1295       break;
1296     default:
1297       return bfd_reloc_other;
1298     }
1299
1300   return flag;
1301 }
1302
1303 /* This relocation routine is used by some of the backend linkers.
1304    They do not construct asymbol or arelent structures, so there is no
1305    reason for them to use bfd_perform_relocation.  Also,
1306    bfd_perform_relocation is so hacked up it is easier to write a new
1307    function than to try to deal with it.
1308
1309    This routine does a final relocation.  Whether it is useful for a
1310    relocatable link depends upon how the object format defines
1311    relocations.
1312
1313    FIXME: This routine ignores any special_function in the HOWTO,
1314    since the existing special_function values have been written for
1315    bfd_perform_relocation.
1316
1317    HOWTO is the reloc howto information.
1318    INPUT_BFD is the BFD which the reloc applies to.
1319    INPUT_SECTION is the section which the reloc applies to.
1320    CONTENTS is the contents of the section.
1321    ADDRESS is the address of the reloc within INPUT_SECTION.
1322    VALUE is the value of the symbol the reloc refers to.
1323    ADDEND is the addend of the reloc.  */
1324
1325 bfd_reloc_status_type
1326 _bfd_final_link_relocate (reloc_howto_type *howto,
1327                           bfd *input_bfd,
1328                           asection *input_section,
1329                           bfd_byte *contents,
1330                           bfd_vma address,
1331                           bfd_vma value,
1332                           bfd_vma addend)
1333 {
1334   bfd_vma relocation;
1335
1336   /* Sanity check the address.  */
1337   if (address > bfd_get_section_limit (input_bfd, input_section))
1338     return bfd_reloc_outofrange;
1339
1340   /* This function assumes that we are dealing with a basic relocation
1341      against a symbol.  We want to compute the value of the symbol to
1342      relocate to.  This is just VALUE, the value of the symbol, plus
1343      ADDEND, any addend associated with the reloc.  */
1344   relocation = value + addend;
1345
1346   /* If the relocation is PC relative, we want to set RELOCATION to
1347      the distance between the symbol (currently in RELOCATION) and the
1348      location we are relocating.  Some targets (e.g., i386-aout)
1349      arrange for the contents of the section to be the negative of the
1350      offset of the location within the section; for such targets
1351      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1352      simply leave the contents of the section as zero; for such
1353      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1354      need to subtract out the offset of the location within the
1355      section (which is just ADDRESS).  */
1356   if (howto->pc_relative)
1357     {
1358       relocation -= (input_section->output_section->vma
1359                      + input_section->output_offset);
1360       if (howto->pcrel_offset)
1361         relocation -= address;
1362     }
1363
1364   return _bfd_relocate_contents (howto, input_bfd, relocation,
1365                                  contents + address);
1366 }
1367
1368 /* Relocate a given location using a given value and howto.  */
1369
1370 bfd_reloc_status_type
1371 _bfd_relocate_contents (reloc_howto_type *howto,
1372                         bfd *input_bfd,
1373                         bfd_vma relocation,
1374                         bfd_byte *location)
1375 {
1376   int size;
1377   bfd_vma x = 0;
1378   bfd_reloc_status_type flag;
1379   unsigned int rightshift = howto->rightshift;
1380   unsigned int bitpos = howto->bitpos;
1381
1382   /* If the size is negative, negate RELOCATION.  This isn't very
1383      general.  */
1384   if (howto->size < 0)
1385     relocation = -relocation;
1386
1387   /* Get the value we are going to relocate.  */
1388   size = bfd_get_reloc_size (howto);
1389   switch (size)
1390     {
1391     default:
1392     case 0:
1393       abort ();
1394     case 1:
1395       x = bfd_get_8 (input_bfd, location);
1396       break;
1397     case 2:
1398       x = bfd_get_16 (input_bfd, location);
1399       break;
1400     case 4:
1401       x = bfd_get_32 (input_bfd, location);
1402       break;
1403     case 8:
1404 #ifdef BFD64
1405       x = bfd_get_64 (input_bfd, location);
1406 #else
1407       abort ();
1408 #endif
1409       break;
1410     }
1411
1412   /* Check for overflow.  FIXME: We may drop bits during the addition
1413      which we don't check for.  We must either check at every single
1414      operation, which would be tedious, or we must do the computations
1415      in a type larger than bfd_vma, which would be inefficient.  */
1416   flag = bfd_reloc_ok;
1417   if (howto->complain_on_overflow != complain_overflow_dont)
1418     {
1419       bfd_vma addrmask, fieldmask, signmask, ss;
1420       bfd_vma a, b, sum;
1421
1422       /* Get the values to be added together.  For signed and unsigned
1423          relocations, we assume that all values should be truncated to
1424          the size of an address.  For bitfields, all the bits matter.
1425          See also bfd_check_overflow.  */
1426       fieldmask = N_ONES (howto->bitsize);
1427       signmask = ~fieldmask;
1428       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1429                   | (fieldmask << rightshift));
1430       a = (relocation & addrmask) >> rightshift;
1431       b = (x & howto->src_mask & addrmask) >> bitpos;
1432       addrmask >>= rightshift;
1433
1434       switch (howto->complain_on_overflow)
1435         {
1436         case complain_overflow_signed:
1437           /* If any sign bits are set, all sign bits must be set.
1438              That is, A must be a valid negative address after
1439              shifting.  */
1440           signmask = ~(fieldmask >> 1);
1441           /* Fall thru */
1442
1443         case complain_overflow_bitfield:
1444           /* Much like the signed check, but for a field one bit
1445              wider.  We allow a bitfield to represent numbers in the
1446              range -2**n to 2**n-1, where n is the number of bits in the
1447              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1448              can't overflow, which is exactly what we want.  */
1449           ss = a & signmask;
1450           if (ss != 0 && ss != (addrmask & signmask))
1451             flag = bfd_reloc_overflow;
1452
1453           /* We only need this next bit of code if the sign bit of B
1454              is below the sign bit of A.  This would only happen if
1455              SRC_MASK had fewer bits than BITSIZE.  Note that if
1456              SRC_MASK has more bits than BITSIZE, we can get into
1457              trouble; we would need to verify that B is in range, as
1458              we do for A above.  */
1459           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1460           ss >>= bitpos;
1461
1462           /* Set all the bits above the sign bit.  */
1463           b = (b ^ ss) - ss;
1464
1465           /* Now we can do the addition.  */
1466           sum = a + b;
1467
1468           /* See if the result has the correct sign.  Bits above the
1469              sign bit are junk now; ignore them.  If the sum is
1470              positive, make sure we did not have all negative inputs;
1471              if the sum is negative, make sure we did not have all
1472              positive inputs.  The test below looks only at the sign
1473              bits, and it really just
1474                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1475
1476              We mask with addrmask here to explicitly allow an address
1477              wrap-around.  The Linux kernel relies on it, and it is
1478              the only way to write assembler code which can run when
1479              loaded at a location 0x80000000 away from the location at
1480              which it is linked.  */
1481           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1482             flag = bfd_reloc_overflow;
1483           break;
1484
1485         case complain_overflow_unsigned:
1486           /* Checking for an unsigned overflow is relatively easy:
1487              trim the addresses and add, and trim the result as well.
1488              Overflow is normally indicated when the result does not
1489              fit in the field.  However, we also need to consider the
1490              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1491              input is 0x80000000, and bfd_vma is only 32 bits; then we
1492              will get sum == 0, but there is an overflow, since the
1493              inputs did not fit in the field.  Instead of doing a
1494              separate test, we can check for this by or-ing in the
1495              operands when testing for the sum overflowing its final
1496              field.  */
1497           sum = (a + b) & addrmask;
1498           if ((a | b | sum) & signmask)
1499             flag = bfd_reloc_overflow;
1500           break;
1501
1502         default:
1503           abort ();
1504         }
1505     }
1506
1507   /* Put RELOCATION in the right bits.  */
1508   relocation >>= (bfd_vma) rightshift;
1509   relocation <<= (bfd_vma) bitpos;
1510
1511   /* Add RELOCATION to the right bits of X.  */
1512   x = ((x & ~howto->dst_mask)
1513        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1514
1515   /* Put the relocated value back in the object file.  */
1516   switch (size)
1517     {
1518     default:
1519       abort ();
1520     case 1:
1521       bfd_put_8 (input_bfd, x, location);
1522       break;
1523     case 2:
1524       bfd_put_16 (input_bfd, x, location);
1525       break;
1526     case 4:
1527       bfd_put_32 (input_bfd, x, location);
1528       break;
1529     case 8:
1530 #ifdef BFD64
1531       bfd_put_64 (input_bfd, x, location);
1532 #else
1533       abort ();
1534 #endif
1535       break;
1536     }
1537
1538   return flag;
1539 }
1540
1541 /* Clear a given location using a given howto, by applying a fixed relocation
1542    value and discarding any in-place addend.  This is used for fixed-up
1543    relocations against discarded symbols, to make ignorable debug or unwind
1544    information more obvious.  */
1545
1546 void
1547 _bfd_clear_contents (reloc_howto_type *howto,
1548                      bfd *input_bfd,
1549                      asection *input_section,
1550                      bfd_byte *location)
1551 {
1552   int size;
1553   bfd_vma x = 0;
1554
1555   /* Get the value we are going to relocate.  */
1556   size = bfd_get_reloc_size (howto);
1557   switch (size)
1558     {
1559     default:
1560     case 0:
1561       abort ();
1562     case 1:
1563       x = bfd_get_8 (input_bfd, location);
1564       break;
1565     case 2:
1566       x = bfd_get_16 (input_bfd, location);
1567       break;
1568     case 4:
1569       x = bfd_get_32 (input_bfd, location);
1570       break;
1571     case 8:
1572 #ifdef BFD64
1573       x = bfd_get_64 (input_bfd, location);
1574 #else
1575       abort ();
1576 #endif
1577       break;
1578     }
1579
1580   /* Zero out the unwanted bits of X.  */
1581   x &= ~howto->dst_mask;
1582
1583   /* For a range list, use 1 instead of 0 as placeholder.  0
1584      would terminate the list, hiding any later entries.  */
1585   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1586               ".debug_ranges") == 0
1587       && (howto->dst_mask & 1) != 0)
1588     x |= 1;
1589
1590   /* Put the relocated value back in the object file.  */
1591   switch (size)
1592     {
1593     default:
1594     case 0:
1595       abort ();
1596     case 1:
1597       bfd_put_8 (input_bfd, x, location);
1598       break;
1599     case 2:
1600       bfd_put_16 (input_bfd, x, location);
1601       break;
1602     case 4:
1603       bfd_put_32 (input_bfd, x, location);
1604       break;
1605     case 8:
1606 #ifdef BFD64
1607       bfd_put_64 (input_bfd, x, location);
1608 #else
1609       abort ();
1610 #endif
1611       break;
1612     }
1613 }
1614
1615 /*
1616 DOCDD
1617 INODE
1618         howto manager,  , typedef arelent, Relocations
1619
1620 SUBSECTION
1621         The howto manager
1622
1623         When an application wants to create a relocation, but doesn't
1624         know what the target machine might call it, it can find out by
1625         using this bit of code.
1626
1627 */
1628
1629 /*
1630 TYPEDEF
1631         bfd_reloc_code_type
1632
1633 DESCRIPTION
1634         The insides of a reloc code.  The idea is that, eventually, there
1635         will be one enumerator for every type of relocation we ever do.
1636         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1637         return a howto pointer.
1638
1639         This does mean that the application must determine the correct
1640         enumerator value; you can't get a howto pointer from a random set
1641         of attributes.
1642
1643 SENUM
1644    bfd_reloc_code_real
1645
1646 ENUM
1647   BFD_RELOC_64
1648 ENUMX
1649   BFD_RELOC_32
1650 ENUMX
1651   BFD_RELOC_26
1652 ENUMX
1653   BFD_RELOC_24
1654 ENUMX
1655   BFD_RELOC_16
1656 ENUMX
1657   BFD_RELOC_14
1658 ENUMX
1659   BFD_RELOC_8
1660 ENUMDOC
1661   Basic absolute relocations of N bits.
1662
1663 ENUM
1664   BFD_RELOC_64_PCREL
1665 ENUMX
1666   BFD_RELOC_32_PCREL
1667 ENUMX
1668   BFD_RELOC_24_PCREL
1669 ENUMX
1670   BFD_RELOC_16_PCREL
1671 ENUMX
1672   BFD_RELOC_12_PCREL
1673 ENUMX
1674   BFD_RELOC_8_PCREL
1675 ENUMDOC
1676   PC-relative relocations.  Sometimes these are relative to the address
1677 of the relocation itself; sometimes they are relative to the start of
1678 the section containing the relocation.  It depends on the specific target.
1679
1680 The 24-bit relocation is used in some Intel 960 configurations.
1681
1682 ENUM
1683   BFD_RELOC_32_SECREL
1684 ENUMDOC
1685   Section relative relocations.  Some targets need this for DWARF2.
1686
1687 ENUM
1688   BFD_RELOC_32_GOT_PCREL
1689 ENUMX
1690   BFD_RELOC_16_GOT_PCREL
1691 ENUMX
1692   BFD_RELOC_8_GOT_PCREL
1693 ENUMX
1694   BFD_RELOC_32_GOTOFF
1695 ENUMX
1696   BFD_RELOC_16_GOTOFF
1697 ENUMX
1698   BFD_RELOC_LO16_GOTOFF
1699 ENUMX
1700   BFD_RELOC_HI16_GOTOFF
1701 ENUMX
1702   BFD_RELOC_HI16_S_GOTOFF
1703 ENUMX
1704   BFD_RELOC_8_GOTOFF
1705 ENUMX
1706   BFD_RELOC_64_PLT_PCREL
1707 ENUMX
1708   BFD_RELOC_32_PLT_PCREL
1709 ENUMX
1710   BFD_RELOC_24_PLT_PCREL
1711 ENUMX
1712   BFD_RELOC_16_PLT_PCREL
1713 ENUMX
1714   BFD_RELOC_8_PLT_PCREL
1715 ENUMX
1716   BFD_RELOC_64_PLTOFF
1717 ENUMX
1718   BFD_RELOC_32_PLTOFF
1719 ENUMX
1720   BFD_RELOC_16_PLTOFF
1721 ENUMX
1722   BFD_RELOC_LO16_PLTOFF
1723 ENUMX
1724   BFD_RELOC_HI16_PLTOFF
1725 ENUMX
1726   BFD_RELOC_HI16_S_PLTOFF
1727 ENUMX
1728   BFD_RELOC_8_PLTOFF
1729 ENUMDOC
1730   For ELF.
1731
1732 ENUM
1733   BFD_RELOC_SIZE32
1734 ENUMX
1735   BFD_RELOC_SIZE64
1736 ENUMDOC
1737   Size relocations.
1738
1739 ENUM
1740   BFD_RELOC_68K_GLOB_DAT
1741 ENUMX
1742   BFD_RELOC_68K_JMP_SLOT
1743 ENUMX
1744   BFD_RELOC_68K_RELATIVE
1745 ENUMX
1746   BFD_RELOC_68K_TLS_GD32
1747 ENUMX
1748   BFD_RELOC_68K_TLS_GD16
1749 ENUMX
1750   BFD_RELOC_68K_TLS_GD8
1751 ENUMX
1752   BFD_RELOC_68K_TLS_LDM32
1753 ENUMX
1754   BFD_RELOC_68K_TLS_LDM16
1755 ENUMX
1756   BFD_RELOC_68K_TLS_LDM8
1757 ENUMX
1758   BFD_RELOC_68K_TLS_LDO32
1759 ENUMX
1760   BFD_RELOC_68K_TLS_LDO16
1761 ENUMX
1762   BFD_RELOC_68K_TLS_LDO8
1763 ENUMX
1764   BFD_RELOC_68K_TLS_IE32
1765 ENUMX
1766   BFD_RELOC_68K_TLS_IE16
1767 ENUMX
1768   BFD_RELOC_68K_TLS_IE8
1769 ENUMX
1770   BFD_RELOC_68K_TLS_LE32
1771 ENUMX
1772   BFD_RELOC_68K_TLS_LE16
1773 ENUMX
1774   BFD_RELOC_68K_TLS_LE8
1775 ENUMDOC
1776   Relocations used by 68K ELF.
1777
1778 ENUM
1779   BFD_RELOC_32_BASEREL
1780 ENUMX
1781   BFD_RELOC_16_BASEREL
1782 ENUMX
1783   BFD_RELOC_LO16_BASEREL
1784 ENUMX
1785   BFD_RELOC_HI16_BASEREL
1786 ENUMX
1787   BFD_RELOC_HI16_S_BASEREL
1788 ENUMX
1789   BFD_RELOC_8_BASEREL
1790 ENUMX
1791   BFD_RELOC_RVA
1792 ENUMDOC
1793   Linkage-table relative.
1794
1795 ENUM
1796   BFD_RELOC_8_FFnn
1797 ENUMDOC
1798   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1799
1800 ENUM
1801   BFD_RELOC_32_PCREL_S2
1802 ENUMX
1803   BFD_RELOC_16_PCREL_S2
1804 ENUMX
1805   BFD_RELOC_23_PCREL_S2
1806 ENUMDOC
1807   These PC-relative relocations are stored as word displacements --
1808 i.e., byte displacements shifted right two bits.  The 30-bit word
1809 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1810 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1811 signed 16-bit displacement is used on the MIPS, and the 23-bit
1812 displacement is used on the Alpha.
1813
1814 ENUM
1815   BFD_RELOC_HI22
1816 ENUMX
1817   BFD_RELOC_LO10
1818 ENUMDOC
1819   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1820 the target word.  These are used on the SPARC.
1821
1822 ENUM
1823   BFD_RELOC_GPREL16
1824 ENUMX
1825   BFD_RELOC_GPREL32
1826 ENUMDOC
1827   For systems that allocate a Global Pointer register, these are
1828 displacements off that register.  These relocation types are
1829 handled specially, because the value the register will have is
1830 decided relatively late.
1831
1832 ENUM
1833   BFD_RELOC_I960_CALLJ
1834 ENUMDOC
1835   Reloc types used for i960/b.out.
1836
1837 ENUM
1838   BFD_RELOC_NONE
1839 ENUMX
1840   BFD_RELOC_SPARC_WDISP22
1841 ENUMX
1842   BFD_RELOC_SPARC22
1843 ENUMX
1844   BFD_RELOC_SPARC13
1845 ENUMX
1846   BFD_RELOC_SPARC_GOT10
1847 ENUMX
1848   BFD_RELOC_SPARC_GOT13
1849 ENUMX
1850   BFD_RELOC_SPARC_GOT22
1851 ENUMX
1852   BFD_RELOC_SPARC_PC10
1853 ENUMX
1854   BFD_RELOC_SPARC_PC22
1855 ENUMX
1856   BFD_RELOC_SPARC_WPLT30
1857 ENUMX
1858   BFD_RELOC_SPARC_COPY
1859 ENUMX
1860   BFD_RELOC_SPARC_GLOB_DAT
1861 ENUMX
1862   BFD_RELOC_SPARC_JMP_SLOT
1863 ENUMX
1864   BFD_RELOC_SPARC_RELATIVE
1865 ENUMX
1866   BFD_RELOC_SPARC_UA16
1867 ENUMX
1868   BFD_RELOC_SPARC_UA32
1869 ENUMX
1870   BFD_RELOC_SPARC_UA64
1871 ENUMX
1872   BFD_RELOC_SPARC_GOTDATA_HIX22
1873 ENUMX
1874   BFD_RELOC_SPARC_GOTDATA_LOX10
1875 ENUMX
1876   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1877 ENUMX
1878   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1879 ENUMX
1880   BFD_RELOC_SPARC_GOTDATA_OP
1881 ENUMX
1882   BFD_RELOC_SPARC_JMP_IREL
1883 ENUMX
1884   BFD_RELOC_SPARC_IRELATIVE
1885 ENUMDOC
1886   SPARC ELF relocations.  There is probably some overlap with other
1887   relocation types already defined.
1888
1889 ENUM
1890   BFD_RELOC_SPARC_BASE13
1891 ENUMX
1892   BFD_RELOC_SPARC_BASE22
1893 ENUMDOC
1894   I think these are specific to SPARC a.out (e.g., Sun 4).
1895
1896 ENUMEQ
1897   BFD_RELOC_SPARC_64
1898   BFD_RELOC_64
1899 ENUMX
1900   BFD_RELOC_SPARC_10
1901 ENUMX
1902   BFD_RELOC_SPARC_11
1903 ENUMX
1904   BFD_RELOC_SPARC_OLO10
1905 ENUMX
1906   BFD_RELOC_SPARC_HH22
1907 ENUMX
1908   BFD_RELOC_SPARC_HM10
1909 ENUMX
1910   BFD_RELOC_SPARC_LM22
1911 ENUMX
1912   BFD_RELOC_SPARC_PC_HH22
1913 ENUMX
1914   BFD_RELOC_SPARC_PC_HM10
1915 ENUMX
1916   BFD_RELOC_SPARC_PC_LM22
1917 ENUMX
1918   BFD_RELOC_SPARC_WDISP16
1919 ENUMX
1920   BFD_RELOC_SPARC_WDISP19
1921 ENUMX
1922   BFD_RELOC_SPARC_7
1923 ENUMX
1924   BFD_RELOC_SPARC_6
1925 ENUMX
1926   BFD_RELOC_SPARC_5
1927 ENUMEQX
1928   BFD_RELOC_SPARC_DISP64
1929   BFD_RELOC_64_PCREL
1930 ENUMX
1931   BFD_RELOC_SPARC_PLT32
1932 ENUMX
1933   BFD_RELOC_SPARC_PLT64
1934 ENUMX
1935   BFD_RELOC_SPARC_HIX22
1936 ENUMX
1937   BFD_RELOC_SPARC_LOX10
1938 ENUMX
1939   BFD_RELOC_SPARC_H44
1940 ENUMX
1941   BFD_RELOC_SPARC_M44
1942 ENUMX
1943   BFD_RELOC_SPARC_L44
1944 ENUMX
1945   BFD_RELOC_SPARC_REGISTER
1946 ENUMX
1947   BFD_RELOC_SPARC_H34
1948 ENUMX
1949   BFD_RELOC_SPARC_SIZE32
1950 ENUMX
1951   BFD_RELOC_SPARC_SIZE64
1952 ENUMX
1953   BFD_RELOC_SPARC_WDISP10
1954 ENUMDOC
1955   SPARC64 relocations
1956
1957 ENUM
1958   BFD_RELOC_SPARC_REV32
1959 ENUMDOC
1960   SPARC little endian relocation
1961 ENUM
1962   BFD_RELOC_SPARC_TLS_GD_HI22
1963 ENUMX
1964   BFD_RELOC_SPARC_TLS_GD_LO10
1965 ENUMX
1966   BFD_RELOC_SPARC_TLS_GD_ADD
1967 ENUMX
1968   BFD_RELOC_SPARC_TLS_GD_CALL
1969 ENUMX
1970   BFD_RELOC_SPARC_TLS_LDM_HI22
1971 ENUMX
1972   BFD_RELOC_SPARC_TLS_LDM_LO10
1973 ENUMX
1974   BFD_RELOC_SPARC_TLS_LDM_ADD
1975 ENUMX
1976   BFD_RELOC_SPARC_TLS_LDM_CALL
1977 ENUMX
1978   BFD_RELOC_SPARC_TLS_LDO_HIX22
1979 ENUMX
1980   BFD_RELOC_SPARC_TLS_LDO_LOX10
1981 ENUMX
1982   BFD_RELOC_SPARC_TLS_LDO_ADD
1983 ENUMX
1984   BFD_RELOC_SPARC_TLS_IE_HI22
1985 ENUMX
1986   BFD_RELOC_SPARC_TLS_IE_LO10
1987 ENUMX
1988   BFD_RELOC_SPARC_TLS_IE_LD
1989 ENUMX
1990   BFD_RELOC_SPARC_TLS_IE_LDX
1991 ENUMX
1992   BFD_RELOC_SPARC_TLS_IE_ADD
1993 ENUMX
1994   BFD_RELOC_SPARC_TLS_LE_HIX22
1995 ENUMX
1996   BFD_RELOC_SPARC_TLS_LE_LOX10
1997 ENUMX
1998   BFD_RELOC_SPARC_TLS_DTPMOD32
1999 ENUMX
2000   BFD_RELOC_SPARC_TLS_DTPMOD64
2001 ENUMX
2002   BFD_RELOC_SPARC_TLS_DTPOFF32
2003 ENUMX
2004   BFD_RELOC_SPARC_TLS_DTPOFF64
2005 ENUMX
2006   BFD_RELOC_SPARC_TLS_TPOFF32
2007 ENUMX
2008   BFD_RELOC_SPARC_TLS_TPOFF64
2009 ENUMDOC
2010   SPARC TLS relocations
2011
2012 ENUM
2013   BFD_RELOC_SPU_IMM7
2014 ENUMX
2015   BFD_RELOC_SPU_IMM8
2016 ENUMX
2017   BFD_RELOC_SPU_IMM10
2018 ENUMX
2019   BFD_RELOC_SPU_IMM10W
2020 ENUMX
2021   BFD_RELOC_SPU_IMM16
2022 ENUMX
2023   BFD_RELOC_SPU_IMM16W
2024 ENUMX
2025   BFD_RELOC_SPU_IMM18
2026 ENUMX
2027   BFD_RELOC_SPU_PCREL9a
2028 ENUMX
2029   BFD_RELOC_SPU_PCREL9b
2030 ENUMX
2031   BFD_RELOC_SPU_PCREL16
2032 ENUMX
2033   BFD_RELOC_SPU_LO16
2034 ENUMX
2035   BFD_RELOC_SPU_HI16
2036 ENUMX
2037   BFD_RELOC_SPU_PPU32
2038 ENUMX
2039   BFD_RELOC_SPU_PPU64
2040 ENUMX
2041   BFD_RELOC_SPU_ADD_PIC
2042 ENUMDOC
2043   SPU Relocations.
2044
2045 ENUM
2046   BFD_RELOC_ALPHA_GPDISP_HI16
2047 ENUMDOC
2048   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2049      "addend" in some special way.
2050   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2051      writing; when reading, it will be the absolute section symbol.  The
2052      addend is the displacement in bytes of the "lda" instruction from
2053      the "ldah" instruction (which is at the address of this reloc).
2054 ENUM
2055   BFD_RELOC_ALPHA_GPDISP_LO16
2056 ENUMDOC
2057   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2058      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2059      relocations out, and is filled in with the file's GP value on
2060      reading, for convenience.
2061
2062 ENUM
2063   BFD_RELOC_ALPHA_GPDISP
2064 ENUMDOC
2065   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2066      relocation except that there is no accompanying GPDISP_LO16
2067      relocation.
2068
2069 ENUM
2070   BFD_RELOC_ALPHA_LITERAL
2071 ENUMX
2072   BFD_RELOC_ALPHA_ELF_LITERAL
2073 ENUMX
2074   BFD_RELOC_ALPHA_LITUSE
2075 ENUMDOC
2076   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2077      the assembler turns it into a LDQ instruction to load the address of
2078      the symbol, and then fills in a register in the real instruction.
2079
2080      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2081      section symbol.  The addend is ignored when writing, but is filled
2082      in with the file's GP value on reading, for convenience, as with the
2083      GPDISP_LO16 reloc.
2084
2085      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2086      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2087      but it generates output not based on the position within the .got
2088      section, but relative to the GP value chosen for the file during the
2089      final link stage.
2090
2091      The LITUSE reloc, on the instruction using the loaded address, gives
2092      information to the linker that it might be able to use to optimize
2093      away some literal section references.  The symbol is ignored (read
2094      as the absolute section symbol), and the "addend" indicates the type
2095      of instruction using the register:
2096               1 - "memory" fmt insn
2097               2 - byte-manipulation (byte offset reg)
2098               3 - jsr (target of branch)
2099
2100 ENUM
2101   BFD_RELOC_ALPHA_HINT
2102 ENUMDOC
2103   The HINT relocation indicates a value that should be filled into the
2104      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2105      prediction logic which may be provided on some processors.
2106
2107 ENUM
2108   BFD_RELOC_ALPHA_LINKAGE
2109 ENUMDOC
2110   The LINKAGE relocation outputs a linkage pair in the object file,
2111      which is filled by the linker.
2112
2113 ENUM
2114   BFD_RELOC_ALPHA_CODEADDR
2115 ENUMDOC
2116   The CODEADDR relocation outputs a STO_CA in the object file,
2117      which is filled by the linker.
2118
2119 ENUM
2120   BFD_RELOC_ALPHA_GPREL_HI16
2121 ENUMX
2122   BFD_RELOC_ALPHA_GPREL_LO16
2123 ENUMDOC
2124   The GPREL_HI/LO relocations together form a 32-bit offset from the
2125      GP register.
2126
2127 ENUM
2128   BFD_RELOC_ALPHA_BRSGP
2129 ENUMDOC
2130   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2131   share a common GP, and the target address is adjusted for
2132   STO_ALPHA_STD_GPLOAD.
2133
2134 ENUM
2135   BFD_RELOC_ALPHA_NOP
2136 ENUMDOC
2137   The NOP relocation outputs a NOP if the longword displacement
2138      between two procedure entry points is < 2^21.
2139
2140 ENUM
2141   BFD_RELOC_ALPHA_BSR
2142 ENUMDOC
2143   The BSR relocation outputs a BSR if the longword displacement
2144      between two procedure entry points is < 2^21.
2145
2146 ENUM
2147   BFD_RELOC_ALPHA_LDA
2148 ENUMDOC
2149   The LDA relocation outputs a LDA if the longword displacement
2150      between two procedure entry points is < 2^16.
2151
2152 ENUM
2153   BFD_RELOC_ALPHA_BOH
2154 ENUMDOC
2155   The BOH relocation outputs a BSR if the longword displacement
2156      between two procedure entry points is < 2^21, or else a hint.
2157
2158 ENUM
2159   BFD_RELOC_ALPHA_TLSGD
2160 ENUMX
2161   BFD_RELOC_ALPHA_TLSLDM
2162 ENUMX
2163   BFD_RELOC_ALPHA_DTPMOD64
2164 ENUMX
2165   BFD_RELOC_ALPHA_GOTDTPREL16
2166 ENUMX
2167   BFD_RELOC_ALPHA_DTPREL64
2168 ENUMX
2169   BFD_RELOC_ALPHA_DTPREL_HI16
2170 ENUMX
2171   BFD_RELOC_ALPHA_DTPREL_LO16
2172 ENUMX
2173   BFD_RELOC_ALPHA_DTPREL16
2174 ENUMX
2175   BFD_RELOC_ALPHA_GOTTPREL16
2176 ENUMX
2177   BFD_RELOC_ALPHA_TPREL64
2178 ENUMX
2179   BFD_RELOC_ALPHA_TPREL_HI16
2180 ENUMX
2181   BFD_RELOC_ALPHA_TPREL_LO16
2182 ENUMX
2183   BFD_RELOC_ALPHA_TPREL16
2184 ENUMDOC
2185   Alpha thread-local storage relocations.
2186
2187 ENUM
2188   BFD_RELOC_MIPS_JMP
2189 ENUMX
2190   BFD_RELOC_MICROMIPS_JMP
2191 ENUMDOC
2192   The MIPS jump instruction.
2193
2194 ENUM
2195   BFD_RELOC_MIPS16_JMP
2196 ENUMDOC
2197   The MIPS16 jump instruction.
2198
2199 ENUM
2200   BFD_RELOC_MIPS16_GPREL
2201 ENUMDOC
2202   MIPS16 GP relative reloc.
2203
2204 ENUM
2205   BFD_RELOC_HI16
2206 ENUMDOC
2207   High 16 bits of 32-bit value; simple reloc.
2208
2209 ENUM
2210   BFD_RELOC_HI16_S
2211 ENUMDOC
2212   High 16 bits of 32-bit value but the low 16 bits will be sign
2213      extended and added to form the final result.  If the low 16
2214      bits form a negative number, we need to add one to the high value
2215      to compensate for the borrow when the low bits are added.
2216
2217 ENUM
2218   BFD_RELOC_LO16
2219 ENUMDOC
2220   Low 16 bits.
2221
2222 ENUM
2223   BFD_RELOC_HI16_PCREL
2224 ENUMDOC
2225   High 16 bits of 32-bit pc-relative value
2226 ENUM
2227   BFD_RELOC_HI16_S_PCREL
2228 ENUMDOC
2229   High 16 bits of 32-bit pc-relative value, adjusted
2230 ENUM
2231   BFD_RELOC_LO16_PCREL
2232 ENUMDOC
2233   Low 16 bits of pc-relative value
2234
2235 ENUM
2236   BFD_RELOC_MIPS16_GOT16
2237 ENUMX
2238   BFD_RELOC_MIPS16_CALL16
2239 ENUMDOC
2240   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2241      16-bit immediate fields
2242 ENUM
2243   BFD_RELOC_MIPS16_HI16
2244 ENUMDOC
2245   MIPS16 high 16 bits of 32-bit value.
2246 ENUM
2247   BFD_RELOC_MIPS16_HI16_S
2248 ENUMDOC
2249   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2250      extended and added to form the final result.  If the low 16
2251      bits form a negative number, we need to add one to the high value
2252      to compensate for the borrow when the low bits are added.
2253 ENUM
2254   BFD_RELOC_MIPS16_LO16
2255 ENUMDOC
2256   MIPS16 low 16 bits.
2257
2258 ENUM
2259   BFD_RELOC_MIPS16_TLS_GD
2260 ENUMX
2261   BFD_RELOC_MIPS16_TLS_LDM
2262 ENUMX
2263   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2264 ENUMX
2265   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2266 ENUMX
2267   BFD_RELOC_MIPS16_TLS_GOTTPREL
2268 ENUMX
2269   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2270 ENUMX
2271   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2272 ENUMDOC
2273   MIPS16 TLS relocations
2274
2275 ENUM
2276   BFD_RELOC_MIPS_LITERAL
2277 ENUMX
2278   BFD_RELOC_MICROMIPS_LITERAL
2279 ENUMDOC
2280   Relocation against a MIPS literal section.
2281
2282 ENUM
2283   BFD_RELOC_MICROMIPS_7_PCREL_S1
2284 ENUMX
2285   BFD_RELOC_MICROMIPS_10_PCREL_S1
2286 ENUMX
2287   BFD_RELOC_MICROMIPS_16_PCREL_S1
2288 ENUMDOC
2289   microMIPS PC-relative relocations.
2290
2291 ENUM
2292   BFD_RELOC_MIPS_21_PCREL_S2
2293 ENUMX
2294   BFD_RELOC_MIPS_26_PCREL_S2
2295 ENUMX
2296   BFD_RELOC_MIPS_18_PCREL_S3
2297 ENUMX
2298   BFD_RELOC_MIPS_19_PCREL_S2
2299 ENUMDOC
2300   MIPS PC-relative relocations.
2301
2302 ENUM
2303   BFD_RELOC_MICROMIPS_GPREL16
2304 ENUMX
2305   BFD_RELOC_MICROMIPS_HI16
2306 ENUMX
2307   BFD_RELOC_MICROMIPS_HI16_S
2308 ENUMX
2309   BFD_RELOC_MICROMIPS_LO16
2310 ENUMDOC
2311   microMIPS versions of generic BFD relocs.
2312
2313 ENUM
2314   BFD_RELOC_MIPS_GOT16
2315 ENUMX
2316   BFD_RELOC_MICROMIPS_GOT16
2317 ENUMX
2318   BFD_RELOC_MIPS_CALL16
2319 ENUMX
2320   BFD_RELOC_MICROMIPS_CALL16
2321 ENUMX
2322   BFD_RELOC_MIPS_GOT_HI16
2323 ENUMX
2324   BFD_RELOC_MICROMIPS_GOT_HI16
2325 ENUMX
2326   BFD_RELOC_MIPS_GOT_LO16
2327 ENUMX
2328   BFD_RELOC_MICROMIPS_GOT_LO16
2329 ENUMX
2330   BFD_RELOC_MIPS_CALL_HI16
2331 ENUMX
2332   BFD_RELOC_MICROMIPS_CALL_HI16
2333 ENUMX
2334   BFD_RELOC_MIPS_CALL_LO16
2335 ENUMX
2336   BFD_RELOC_MICROMIPS_CALL_LO16
2337 ENUMX
2338   BFD_RELOC_MIPS_SUB
2339 ENUMX
2340   BFD_RELOC_MICROMIPS_SUB
2341 ENUMX
2342   BFD_RELOC_MIPS_GOT_PAGE
2343 ENUMX
2344   BFD_RELOC_MICROMIPS_GOT_PAGE
2345 ENUMX
2346   BFD_RELOC_MIPS_GOT_OFST
2347 ENUMX
2348   BFD_RELOC_MICROMIPS_GOT_OFST
2349 ENUMX
2350   BFD_RELOC_MIPS_GOT_DISP
2351 ENUMX
2352   BFD_RELOC_MICROMIPS_GOT_DISP
2353 ENUMX
2354   BFD_RELOC_MIPS_SHIFT5
2355 ENUMX
2356   BFD_RELOC_MIPS_SHIFT6
2357 ENUMX
2358   BFD_RELOC_MIPS_INSERT_A
2359 ENUMX
2360   BFD_RELOC_MIPS_INSERT_B
2361 ENUMX
2362   BFD_RELOC_MIPS_DELETE
2363 ENUMX
2364   BFD_RELOC_MIPS_HIGHEST
2365 ENUMX
2366   BFD_RELOC_MICROMIPS_HIGHEST
2367 ENUMX
2368   BFD_RELOC_MIPS_HIGHER
2369 ENUMX
2370   BFD_RELOC_MICROMIPS_HIGHER
2371 ENUMX
2372   BFD_RELOC_MIPS_SCN_DISP
2373 ENUMX
2374   BFD_RELOC_MICROMIPS_SCN_DISP
2375 ENUMX
2376   BFD_RELOC_MIPS_REL16
2377 ENUMX
2378   BFD_RELOC_MIPS_RELGOT
2379 ENUMX
2380   BFD_RELOC_MIPS_JALR
2381 ENUMX
2382   BFD_RELOC_MICROMIPS_JALR
2383 ENUMX
2384   BFD_RELOC_MIPS_TLS_DTPMOD32
2385 ENUMX
2386   BFD_RELOC_MIPS_TLS_DTPREL32
2387 ENUMX
2388   BFD_RELOC_MIPS_TLS_DTPMOD64
2389 ENUMX
2390   BFD_RELOC_MIPS_TLS_DTPREL64
2391 ENUMX
2392   BFD_RELOC_MIPS_TLS_GD
2393 ENUMX
2394   BFD_RELOC_MICROMIPS_TLS_GD
2395 ENUMX
2396   BFD_RELOC_MIPS_TLS_LDM
2397 ENUMX
2398   BFD_RELOC_MICROMIPS_TLS_LDM
2399 ENUMX
2400   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2401 ENUMX
2402   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2403 ENUMX
2404   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2405 ENUMX
2406   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2407 ENUMX
2408   BFD_RELOC_MIPS_TLS_GOTTPREL
2409 ENUMX
2410   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2411 ENUMX
2412   BFD_RELOC_MIPS_TLS_TPREL32
2413 ENUMX
2414   BFD_RELOC_MIPS_TLS_TPREL64
2415 ENUMX
2416   BFD_RELOC_MIPS_TLS_TPREL_HI16
2417 ENUMX
2418   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2419 ENUMX
2420   BFD_RELOC_MIPS_TLS_TPREL_LO16
2421 ENUMX
2422   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2423 ENUMX
2424   BFD_RELOC_MIPS_EH
2425 ENUMDOC
2426   MIPS ELF relocations.
2427 COMMENT
2428
2429 ENUM
2430   BFD_RELOC_MIPS_COPY
2431 ENUMX
2432   BFD_RELOC_MIPS_JUMP_SLOT
2433 ENUMDOC
2434   MIPS ELF relocations (VxWorks and PLT extensions).
2435 COMMENT
2436
2437 ENUM
2438   BFD_RELOC_MOXIE_10_PCREL
2439 ENUMDOC
2440   Moxie ELF relocations.
2441 COMMENT
2442
2443 ENUM
2444   BFD_RELOC_FRV_LABEL16
2445 ENUMX
2446   BFD_RELOC_FRV_LABEL24
2447 ENUMX
2448   BFD_RELOC_FRV_LO16
2449 ENUMX
2450   BFD_RELOC_FRV_HI16
2451 ENUMX
2452   BFD_RELOC_FRV_GPREL12
2453 ENUMX
2454   BFD_RELOC_FRV_GPRELU12
2455 ENUMX
2456   BFD_RELOC_FRV_GPREL32
2457 ENUMX
2458   BFD_RELOC_FRV_GPRELHI
2459 ENUMX
2460   BFD_RELOC_FRV_GPRELLO
2461 ENUMX
2462   BFD_RELOC_FRV_GOT12
2463 ENUMX
2464   BFD_RELOC_FRV_GOTHI
2465 ENUMX
2466   BFD_RELOC_FRV_GOTLO
2467 ENUMX
2468   BFD_RELOC_FRV_FUNCDESC
2469 ENUMX
2470   BFD_RELOC_FRV_FUNCDESC_GOT12
2471 ENUMX
2472   BFD_RELOC_FRV_FUNCDESC_GOTHI
2473 ENUMX
2474   BFD_RELOC_FRV_FUNCDESC_GOTLO
2475 ENUMX
2476   BFD_RELOC_FRV_FUNCDESC_VALUE
2477 ENUMX
2478   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2479 ENUMX
2480   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2481 ENUMX
2482   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2483 ENUMX
2484   BFD_RELOC_FRV_GOTOFF12
2485 ENUMX
2486   BFD_RELOC_FRV_GOTOFFHI
2487 ENUMX
2488   BFD_RELOC_FRV_GOTOFFLO
2489 ENUMX
2490   BFD_RELOC_FRV_GETTLSOFF
2491 ENUMX
2492   BFD_RELOC_FRV_TLSDESC_VALUE
2493 ENUMX
2494   BFD_RELOC_FRV_GOTTLSDESC12
2495 ENUMX
2496   BFD_RELOC_FRV_GOTTLSDESCHI
2497 ENUMX
2498   BFD_RELOC_FRV_GOTTLSDESCLO
2499 ENUMX
2500   BFD_RELOC_FRV_TLSMOFF12
2501 ENUMX
2502   BFD_RELOC_FRV_TLSMOFFHI
2503 ENUMX
2504   BFD_RELOC_FRV_TLSMOFFLO
2505 ENUMX
2506   BFD_RELOC_FRV_GOTTLSOFF12
2507 ENUMX
2508   BFD_RELOC_FRV_GOTTLSOFFHI
2509 ENUMX
2510   BFD_RELOC_FRV_GOTTLSOFFLO
2511 ENUMX
2512   BFD_RELOC_FRV_TLSOFF
2513 ENUMX
2514   BFD_RELOC_FRV_TLSDESC_RELAX
2515 ENUMX
2516   BFD_RELOC_FRV_GETTLSOFF_RELAX
2517 ENUMX
2518   BFD_RELOC_FRV_TLSOFF_RELAX
2519 ENUMX
2520   BFD_RELOC_FRV_TLSMOFF
2521 ENUMDOC
2522   Fujitsu Frv Relocations.
2523 COMMENT
2524
2525 ENUM
2526   BFD_RELOC_MN10300_GOTOFF24
2527 ENUMDOC
2528   This is a 24bit GOT-relative reloc for the mn10300.
2529 ENUM
2530   BFD_RELOC_MN10300_GOT32
2531 ENUMDOC
2532   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2533   in the instruction.
2534 ENUM
2535   BFD_RELOC_MN10300_GOT24
2536 ENUMDOC
2537   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2538   in the instruction.
2539 ENUM
2540   BFD_RELOC_MN10300_GOT16
2541 ENUMDOC
2542   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2543   in the instruction.
2544 ENUM
2545   BFD_RELOC_MN10300_COPY
2546 ENUMDOC
2547   Copy symbol at runtime.
2548 ENUM
2549   BFD_RELOC_MN10300_GLOB_DAT
2550 ENUMDOC
2551   Create GOT entry.
2552 ENUM
2553   BFD_RELOC_MN10300_JMP_SLOT
2554 ENUMDOC
2555   Create PLT entry.
2556 ENUM
2557   BFD_RELOC_MN10300_RELATIVE
2558 ENUMDOC
2559   Adjust by program base.
2560 ENUM
2561   BFD_RELOC_MN10300_SYM_DIFF
2562 ENUMDOC
2563   Together with another reloc targeted at the same location,
2564   allows for a value that is the difference of two symbols
2565   in the same section.
2566 ENUM
2567   BFD_RELOC_MN10300_ALIGN
2568 ENUMDOC
2569   The addend of this reloc is an alignment power that must
2570   be honoured at the offset's location, regardless of linker
2571   relaxation.
2572 ENUM
2573   BFD_RELOC_MN10300_TLS_GD
2574 ENUMX
2575   BFD_RELOC_MN10300_TLS_LD
2576 ENUMX
2577   BFD_RELOC_MN10300_TLS_LDO
2578 ENUMX
2579   BFD_RELOC_MN10300_TLS_GOTIE
2580 ENUMX
2581   BFD_RELOC_MN10300_TLS_IE
2582 ENUMX
2583   BFD_RELOC_MN10300_TLS_LE
2584 ENUMX
2585   BFD_RELOC_MN10300_TLS_DTPMOD
2586 ENUMX
2587   BFD_RELOC_MN10300_TLS_DTPOFF
2588 ENUMX
2589   BFD_RELOC_MN10300_TLS_TPOFF
2590 ENUMDOC
2591   Various TLS-related relocations.
2592 ENUM
2593   BFD_RELOC_MN10300_32_PCREL
2594 ENUMDOC
2595   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2596   instruction.
2597 ENUM
2598   BFD_RELOC_MN10300_16_PCREL
2599 ENUMDOC
2600   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2601   instruction.
2602 COMMENT
2603
2604 ENUM
2605   BFD_RELOC_386_GOT32
2606 ENUMX
2607   BFD_RELOC_386_PLT32
2608 ENUMX
2609   BFD_RELOC_386_COPY
2610 ENUMX
2611   BFD_RELOC_386_GLOB_DAT
2612 ENUMX
2613   BFD_RELOC_386_JUMP_SLOT
2614 ENUMX
2615   BFD_RELOC_386_RELATIVE
2616 ENUMX
2617   BFD_RELOC_386_GOTOFF
2618 ENUMX
2619   BFD_RELOC_386_GOTPC
2620 ENUMX
2621   BFD_RELOC_386_TLS_TPOFF
2622 ENUMX
2623   BFD_RELOC_386_TLS_IE
2624 ENUMX
2625   BFD_RELOC_386_TLS_GOTIE
2626 ENUMX
2627   BFD_RELOC_386_TLS_LE
2628 ENUMX
2629   BFD_RELOC_386_TLS_GD
2630 ENUMX
2631   BFD_RELOC_386_TLS_LDM
2632 ENUMX
2633   BFD_RELOC_386_TLS_LDO_32
2634 ENUMX
2635   BFD_RELOC_386_TLS_IE_32
2636 ENUMX
2637   BFD_RELOC_386_TLS_LE_32
2638 ENUMX
2639   BFD_RELOC_386_TLS_DTPMOD32
2640 ENUMX
2641   BFD_RELOC_386_TLS_DTPOFF32
2642 ENUMX
2643   BFD_RELOC_386_TLS_TPOFF32
2644 ENUMX
2645   BFD_RELOC_386_TLS_GOTDESC
2646 ENUMX
2647   BFD_RELOC_386_TLS_DESC_CALL
2648 ENUMX
2649   BFD_RELOC_386_TLS_DESC
2650 ENUMX
2651   BFD_RELOC_386_IRELATIVE
2652 ENUMDOC
2653   i386/elf relocations
2654
2655 ENUM
2656   BFD_RELOC_X86_64_GOT32
2657 ENUMX
2658   BFD_RELOC_X86_64_PLT32
2659 ENUMX
2660   BFD_RELOC_X86_64_COPY
2661 ENUMX
2662   BFD_RELOC_X86_64_GLOB_DAT
2663 ENUMX
2664   BFD_RELOC_X86_64_JUMP_SLOT
2665 ENUMX
2666   BFD_RELOC_X86_64_RELATIVE
2667 ENUMX
2668   BFD_RELOC_X86_64_GOTPCREL
2669 ENUMX
2670   BFD_RELOC_X86_64_32S
2671 ENUMX
2672   BFD_RELOC_X86_64_DTPMOD64
2673 ENUMX
2674   BFD_RELOC_X86_64_DTPOFF64
2675 ENUMX
2676   BFD_RELOC_X86_64_TPOFF64
2677 ENUMX
2678   BFD_RELOC_X86_64_TLSGD
2679 ENUMX
2680   BFD_RELOC_X86_64_TLSLD
2681 ENUMX
2682   BFD_RELOC_X86_64_DTPOFF32
2683 ENUMX
2684   BFD_RELOC_X86_64_GOTTPOFF
2685 ENUMX
2686   BFD_RELOC_X86_64_TPOFF32
2687 ENUMX
2688   BFD_RELOC_X86_64_GOTOFF64
2689 ENUMX
2690   BFD_RELOC_X86_64_GOTPC32
2691 ENUMX
2692   BFD_RELOC_X86_64_GOT64
2693 ENUMX
2694   BFD_RELOC_X86_64_GOTPCREL64
2695 ENUMX
2696   BFD_RELOC_X86_64_GOTPC64
2697 ENUMX
2698   BFD_RELOC_X86_64_GOTPLT64
2699 ENUMX
2700   BFD_RELOC_X86_64_PLTOFF64
2701 ENUMX
2702   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2703 ENUMX
2704   BFD_RELOC_X86_64_TLSDESC_CALL
2705 ENUMX
2706   BFD_RELOC_X86_64_TLSDESC
2707 ENUMX
2708   BFD_RELOC_X86_64_IRELATIVE
2709 ENUMX
2710   BFD_RELOC_X86_64_PC32_BND
2711 ENUMX
2712   BFD_RELOC_X86_64_PLT32_BND
2713 ENUMDOC
2714   x86-64/elf relocations
2715
2716 ENUM
2717   BFD_RELOC_NS32K_IMM_8
2718 ENUMX
2719   BFD_RELOC_NS32K_IMM_16
2720 ENUMX
2721   BFD_RELOC_NS32K_IMM_32
2722 ENUMX
2723   BFD_RELOC_NS32K_IMM_8_PCREL
2724 ENUMX
2725   BFD_RELOC_NS32K_IMM_16_PCREL
2726 ENUMX
2727   BFD_RELOC_NS32K_IMM_32_PCREL
2728 ENUMX
2729   BFD_RELOC_NS32K_DISP_8
2730 ENUMX
2731   BFD_RELOC_NS32K_DISP_16
2732 ENUMX
2733   BFD_RELOC_NS32K_DISP_32
2734 ENUMX
2735   BFD_RELOC_NS32K_DISP_8_PCREL
2736 ENUMX
2737   BFD_RELOC_NS32K_DISP_16_PCREL
2738 ENUMX
2739   BFD_RELOC_NS32K_DISP_32_PCREL
2740 ENUMDOC
2741   ns32k relocations
2742
2743 ENUM
2744   BFD_RELOC_PDP11_DISP_8_PCREL
2745 ENUMX
2746   BFD_RELOC_PDP11_DISP_6_PCREL
2747 ENUMDOC
2748   PDP11 relocations
2749
2750 ENUM
2751   BFD_RELOC_PJ_CODE_HI16
2752 ENUMX
2753   BFD_RELOC_PJ_CODE_LO16
2754 ENUMX
2755   BFD_RELOC_PJ_CODE_DIR16
2756 ENUMX
2757   BFD_RELOC_PJ_CODE_DIR32
2758 ENUMX
2759   BFD_RELOC_PJ_CODE_REL16
2760 ENUMX
2761   BFD_RELOC_PJ_CODE_REL32
2762 ENUMDOC
2763   Picojava relocs.  Not all of these appear in object files.
2764
2765 ENUM
2766   BFD_RELOC_PPC_B26
2767 ENUMX
2768   BFD_RELOC_PPC_BA26
2769 ENUMX
2770   BFD_RELOC_PPC_TOC16
2771 ENUMX
2772   BFD_RELOC_PPC_B16
2773 ENUMX
2774   BFD_RELOC_PPC_B16_BRTAKEN
2775 ENUMX
2776   BFD_RELOC_PPC_B16_BRNTAKEN
2777 ENUMX
2778   BFD_RELOC_PPC_BA16
2779 ENUMX
2780   BFD_RELOC_PPC_BA16_BRTAKEN
2781 ENUMX
2782   BFD_RELOC_PPC_BA16_BRNTAKEN
2783 ENUMX
2784   BFD_RELOC_PPC_COPY
2785 ENUMX
2786   BFD_RELOC_PPC_GLOB_DAT
2787 ENUMX
2788   BFD_RELOC_PPC_JMP_SLOT
2789 ENUMX
2790   BFD_RELOC_PPC_RELATIVE
2791 ENUMX
2792   BFD_RELOC_PPC_LOCAL24PC
2793 ENUMX
2794   BFD_RELOC_PPC_EMB_NADDR32
2795 ENUMX
2796   BFD_RELOC_PPC_EMB_NADDR16
2797 ENUMX
2798   BFD_RELOC_PPC_EMB_NADDR16_LO
2799 ENUMX
2800   BFD_RELOC_PPC_EMB_NADDR16_HI
2801 ENUMX
2802   BFD_RELOC_PPC_EMB_NADDR16_HA
2803 ENUMX
2804   BFD_RELOC_PPC_EMB_SDAI16
2805 ENUMX
2806   BFD_RELOC_PPC_EMB_SDA2I16
2807 ENUMX
2808   BFD_RELOC_PPC_EMB_SDA2REL
2809 ENUMX
2810   BFD_RELOC_PPC_EMB_SDA21
2811 ENUMX
2812   BFD_RELOC_PPC_EMB_MRKREF
2813 ENUMX
2814   BFD_RELOC_PPC_EMB_RELSEC16
2815 ENUMX
2816   BFD_RELOC_PPC_EMB_RELST_LO
2817 ENUMX
2818   BFD_RELOC_PPC_EMB_RELST_HI
2819 ENUMX
2820   BFD_RELOC_PPC_EMB_RELST_HA
2821 ENUMX
2822   BFD_RELOC_PPC_EMB_BIT_FLD
2823 ENUMX
2824   BFD_RELOC_PPC_EMB_RELSDA
2825 ENUMX
2826   BFD_RELOC_PPC_VLE_REL8
2827 ENUMX
2828   BFD_RELOC_PPC_VLE_REL15
2829 ENUMX
2830   BFD_RELOC_PPC_VLE_REL24
2831 ENUMX
2832   BFD_RELOC_PPC_VLE_LO16A
2833 ENUMX
2834   BFD_RELOC_PPC_VLE_LO16D
2835 ENUMX
2836   BFD_RELOC_PPC_VLE_HI16A
2837 ENUMX
2838   BFD_RELOC_PPC_VLE_HI16D
2839 ENUMX
2840   BFD_RELOC_PPC_VLE_HA16A
2841 ENUMX
2842   BFD_RELOC_PPC_VLE_HA16D
2843 ENUMX
2844   BFD_RELOC_PPC_VLE_SDA21
2845 ENUMX
2846   BFD_RELOC_PPC_VLE_SDA21_LO
2847 ENUMX
2848   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2849 ENUMX
2850   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2851 ENUMX
2852   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2853 ENUMX
2854   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2855 ENUMX
2856   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2857 ENUMX
2858   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2859 ENUMX
2860   BFD_RELOC_PPC64_HIGHER
2861 ENUMX
2862   BFD_RELOC_PPC64_HIGHER_S
2863 ENUMX
2864   BFD_RELOC_PPC64_HIGHEST
2865 ENUMX
2866   BFD_RELOC_PPC64_HIGHEST_S
2867 ENUMX
2868   BFD_RELOC_PPC64_TOC16_LO
2869 ENUMX
2870   BFD_RELOC_PPC64_TOC16_HI
2871 ENUMX
2872   BFD_RELOC_PPC64_TOC16_HA
2873 ENUMX
2874   BFD_RELOC_PPC64_TOC
2875 ENUMX
2876   BFD_RELOC_PPC64_PLTGOT16
2877 ENUMX
2878   BFD_RELOC_PPC64_PLTGOT16_LO
2879 ENUMX
2880   BFD_RELOC_PPC64_PLTGOT16_HI
2881 ENUMX
2882   BFD_RELOC_PPC64_PLTGOT16_HA
2883 ENUMX
2884   BFD_RELOC_PPC64_ADDR16_DS
2885 ENUMX
2886   BFD_RELOC_PPC64_ADDR16_LO_DS
2887 ENUMX
2888   BFD_RELOC_PPC64_GOT16_DS
2889 ENUMX
2890   BFD_RELOC_PPC64_GOT16_LO_DS
2891 ENUMX
2892   BFD_RELOC_PPC64_PLT16_LO_DS
2893 ENUMX
2894   BFD_RELOC_PPC64_SECTOFF_DS
2895 ENUMX
2896   BFD_RELOC_PPC64_SECTOFF_LO_DS
2897 ENUMX
2898   BFD_RELOC_PPC64_TOC16_DS
2899 ENUMX
2900   BFD_RELOC_PPC64_TOC16_LO_DS
2901 ENUMX
2902   BFD_RELOC_PPC64_PLTGOT16_DS
2903 ENUMX
2904   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2905 ENUMX
2906   BFD_RELOC_PPC64_ADDR16_HIGH
2907 ENUMX
2908   BFD_RELOC_PPC64_ADDR16_HIGHA
2909 ENUMX
2910   BFD_RELOC_PPC64_ADDR64_LOCAL
2911 ENUMDOC
2912   Power(rs6000) and PowerPC relocations.
2913
2914 ENUM
2915   BFD_RELOC_PPC_TLS
2916 ENUMX
2917   BFD_RELOC_PPC_TLSGD
2918 ENUMX
2919   BFD_RELOC_PPC_TLSLD
2920 ENUMX
2921   BFD_RELOC_PPC_DTPMOD
2922 ENUMX
2923   BFD_RELOC_PPC_TPREL16
2924 ENUMX
2925   BFD_RELOC_PPC_TPREL16_LO
2926 ENUMX
2927   BFD_RELOC_PPC_TPREL16_HI
2928 ENUMX
2929   BFD_RELOC_PPC_TPREL16_HA
2930 ENUMX
2931   BFD_RELOC_PPC_TPREL
2932 ENUMX
2933   BFD_RELOC_PPC_DTPREL16
2934 ENUMX
2935   BFD_RELOC_PPC_DTPREL16_LO
2936 ENUMX
2937   BFD_RELOC_PPC_DTPREL16_HI
2938 ENUMX
2939   BFD_RELOC_PPC_DTPREL16_HA
2940 ENUMX
2941   BFD_RELOC_PPC_DTPREL
2942 ENUMX
2943   BFD_RELOC_PPC_GOT_TLSGD16
2944 ENUMX
2945   BFD_RELOC_PPC_GOT_TLSGD16_LO
2946 ENUMX
2947   BFD_RELOC_PPC_GOT_TLSGD16_HI
2948 ENUMX
2949   BFD_RELOC_PPC_GOT_TLSGD16_HA
2950 ENUMX
2951   BFD_RELOC_PPC_GOT_TLSLD16
2952 ENUMX
2953   BFD_RELOC_PPC_GOT_TLSLD16_LO
2954 ENUMX
2955   BFD_RELOC_PPC_GOT_TLSLD16_HI
2956 ENUMX
2957   BFD_RELOC_PPC_GOT_TLSLD16_HA
2958 ENUMX
2959   BFD_RELOC_PPC_GOT_TPREL16
2960 ENUMX
2961   BFD_RELOC_PPC_GOT_TPREL16_LO
2962 ENUMX
2963   BFD_RELOC_PPC_GOT_TPREL16_HI
2964 ENUMX
2965   BFD_RELOC_PPC_GOT_TPREL16_HA
2966 ENUMX
2967   BFD_RELOC_PPC_GOT_DTPREL16
2968 ENUMX
2969   BFD_RELOC_PPC_GOT_DTPREL16_LO
2970 ENUMX
2971   BFD_RELOC_PPC_GOT_DTPREL16_HI
2972 ENUMX
2973   BFD_RELOC_PPC_GOT_DTPREL16_HA
2974 ENUMX
2975   BFD_RELOC_PPC64_TPREL16_DS
2976 ENUMX
2977   BFD_RELOC_PPC64_TPREL16_LO_DS
2978 ENUMX
2979   BFD_RELOC_PPC64_TPREL16_HIGHER
2980 ENUMX
2981   BFD_RELOC_PPC64_TPREL16_HIGHERA
2982 ENUMX
2983   BFD_RELOC_PPC64_TPREL16_HIGHEST
2984 ENUMX
2985   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2986 ENUMX
2987   BFD_RELOC_PPC64_DTPREL16_DS
2988 ENUMX
2989   BFD_RELOC_PPC64_DTPREL16_LO_DS
2990 ENUMX
2991   BFD_RELOC_PPC64_DTPREL16_HIGHER
2992 ENUMX
2993   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2994 ENUMX
2995   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2996 ENUMX
2997   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2998 ENUMX
2999   BFD_RELOC_PPC64_TPREL16_HIGH
3000 ENUMX
3001   BFD_RELOC_PPC64_TPREL16_HIGHA
3002 ENUMX
3003   BFD_RELOC_PPC64_DTPREL16_HIGH
3004 ENUMX
3005   BFD_RELOC_PPC64_DTPREL16_HIGHA
3006 ENUMDOC
3007   PowerPC and PowerPC64 thread-local storage relocations.
3008
3009 ENUM
3010   BFD_RELOC_I370_D12
3011 ENUMDOC
3012   IBM 370/390 relocations
3013
3014 ENUM
3015   BFD_RELOC_CTOR
3016 ENUMDOC
3017   The type of reloc used to build a constructor table - at the moment
3018   probably a 32 bit wide absolute relocation, but the target can choose.
3019   It generally does map to one of the other relocation types.
3020
3021 ENUM
3022   BFD_RELOC_ARM_PCREL_BRANCH
3023 ENUMDOC
3024   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3025   not stored in the instruction.
3026 ENUM
3027   BFD_RELOC_ARM_PCREL_BLX
3028 ENUMDOC
3029   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3030   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3031   field in the instruction.
3032 ENUM
3033   BFD_RELOC_THUMB_PCREL_BLX
3034 ENUMDOC
3035   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3036   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3037   field in the instruction.
3038 ENUM
3039   BFD_RELOC_ARM_PCREL_CALL
3040 ENUMDOC
3041   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3042 ENUM
3043   BFD_RELOC_ARM_PCREL_JUMP
3044 ENUMDOC
3045   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3046
3047 ENUM
3048   BFD_RELOC_THUMB_PCREL_BRANCH7
3049 ENUMX
3050   BFD_RELOC_THUMB_PCREL_BRANCH9
3051 ENUMX
3052   BFD_RELOC_THUMB_PCREL_BRANCH12
3053 ENUMX
3054   BFD_RELOC_THUMB_PCREL_BRANCH20
3055 ENUMX
3056   BFD_RELOC_THUMB_PCREL_BRANCH23
3057 ENUMX
3058   BFD_RELOC_THUMB_PCREL_BRANCH25
3059 ENUMDOC
3060   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3061   The lowest bit must be zero and is not stored in the instruction.
3062   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3063   "nn" one smaller in all cases.  Note further that BRANCH23
3064   corresponds to R_ARM_THM_CALL.
3065
3066 ENUM
3067   BFD_RELOC_ARM_OFFSET_IMM
3068 ENUMDOC
3069   12-bit immediate offset, used in ARM-format ldr and str instructions.
3070
3071 ENUM
3072   BFD_RELOC_ARM_THUMB_OFFSET
3073 ENUMDOC
3074   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3075
3076 ENUM
3077   BFD_RELOC_ARM_TARGET1
3078 ENUMDOC
3079   Pc-relative or absolute relocation depending on target.  Used for
3080   entries in .init_array sections.
3081 ENUM
3082   BFD_RELOC_ARM_ROSEGREL32
3083 ENUMDOC
3084   Read-only segment base relative address.
3085 ENUM
3086   BFD_RELOC_ARM_SBREL32
3087 ENUMDOC
3088   Data segment base relative address.
3089 ENUM
3090   BFD_RELOC_ARM_TARGET2
3091 ENUMDOC
3092   This reloc is used for references to RTTI data from exception handling
3093   tables.  The actual definition depends on the target.  It may be a
3094   pc-relative or some form of GOT-indirect relocation.
3095 ENUM
3096   BFD_RELOC_ARM_PREL31
3097 ENUMDOC
3098   31-bit PC relative address.
3099 ENUM
3100   BFD_RELOC_ARM_MOVW
3101 ENUMX
3102   BFD_RELOC_ARM_MOVT
3103 ENUMX
3104   BFD_RELOC_ARM_MOVW_PCREL
3105 ENUMX
3106   BFD_RELOC_ARM_MOVT_PCREL
3107 ENUMX
3108   BFD_RELOC_ARM_THUMB_MOVW
3109 ENUMX
3110   BFD_RELOC_ARM_THUMB_MOVT
3111 ENUMX
3112   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3113 ENUMX
3114   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3115 ENUMDOC
3116   Low and High halfword relocations for MOVW and MOVT instructions.
3117
3118 ENUM
3119   BFD_RELOC_ARM_JUMP_SLOT
3120 ENUMX
3121   BFD_RELOC_ARM_GLOB_DAT
3122 ENUMX
3123   BFD_RELOC_ARM_GOT32
3124 ENUMX
3125   BFD_RELOC_ARM_PLT32
3126 ENUMX
3127   BFD_RELOC_ARM_RELATIVE
3128 ENUMX
3129   BFD_RELOC_ARM_GOTOFF
3130 ENUMX
3131   BFD_RELOC_ARM_GOTPC
3132 ENUMX
3133   BFD_RELOC_ARM_GOT_PREL
3134 ENUMDOC
3135   Relocations for setting up GOTs and PLTs for shared libraries.
3136
3137 ENUM
3138   BFD_RELOC_ARM_TLS_GD32
3139 ENUMX
3140   BFD_RELOC_ARM_TLS_LDO32
3141 ENUMX
3142   BFD_RELOC_ARM_TLS_LDM32
3143 ENUMX
3144   BFD_RELOC_ARM_TLS_DTPOFF32
3145 ENUMX
3146   BFD_RELOC_ARM_TLS_DTPMOD32
3147 ENUMX
3148   BFD_RELOC_ARM_TLS_TPOFF32
3149 ENUMX
3150   BFD_RELOC_ARM_TLS_IE32
3151 ENUMX
3152   BFD_RELOC_ARM_TLS_LE32
3153 ENUMX
3154   BFD_RELOC_ARM_TLS_GOTDESC
3155 ENUMX
3156   BFD_RELOC_ARM_TLS_CALL
3157 ENUMX
3158   BFD_RELOC_ARM_THM_TLS_CALL
3159 ENUMX
3160   BFD_RELOC_ARM_TLS_DESCSEQ
3161 ENUMX
3162   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3163 ENUMX
3164   BFD_RELOC_ARM_TLS_DESC
3165 ENUMDOC
3166   ARM thread-local storage relocations.
3167
3168 ENUM
3169   BFD_RELOC_ARM_ALU_PC_G0_NC
3170 ENUMX
3171   BFD_RELOC_ARM_ALU_PC_G0
3172 ENUMX
3173   BFD_RELOC_ARM_ALU_PC_G1_NC
3174 ENUMX
3175   BFD_RELOC_ARM_ALU_PC_G1
3176 ENUMX
3177   BFD_RELOC_ARM_ALU_PC_G2
3178 ENUMX
3179   BFD_RELOC_ARM_LDR_PC_G0
3180 ENUMX
3181   BFD_RELOC_ARM_LDR_PC_G1
3182 ENUMX
3183   BFD_RELOC_ARM_LDR_PC_G2
3184 ENUMX
3185   BFD_RELOC_ARM_LDRS_PC_G0
3186 ENUMX
3187   BFD_RELOC_ARM_LDRS_PC_G1
3188 ENUMX
3189   BFD_RELOC_ARM_LDRS_PC_G2
3190 ENUMX
3191   BFD_RELOC_ARM_LDC_PC_G0
3192 ENUMX
3193   BFD_RELOC_ARM_LDC_PC_G1
3194 ENUMX
3195   BFD_RELOC_ARM_LDC_PC_G2
3196 ENUMX
3197   BFD_RELOC_ARM_ALU_SB_G0_NC
3198 ENUMX
3199   BFD_RELOC_ARM_ALU_SB_G0
3200 ENUMX
3201   BFD_RELOC_ARM_ALU_SB_G1_NC
3202 ENUMX
3203   BFD_RELOC_ARM_ALU_SB_G1
3204 ENUMX
3205   BFD_RELOC_ARM_ALU_SB_G2
3206 ENUMX
3207   BFD_RELOC_ARM_LDR_SB_G0
3208 ENUMX
3209   BFD_RELOC_ARM_LDR_SB_G1
3210 ENUMX
3211   BFD_RELOC_ARM_LDR_SB_G2
3212 ENUMX
3213   BFD_RELOC_ARM_LDRS_SB_G0
3214 ENUMX
3215   BFD_RELOC_ARM_LDRS_SB_G1
3216 ENUMX
3217   BFD_RELOC_ARM_LDRS_SB_G2
3218 ENUMX
3219   BFD_RELOC_ARM_LDC_SB_G0
3220 ENUMX
3221   BFD_RELOC_ARM_LDC_SB_G1
3222 ENUMX
3223   BFD_RELOC_ARM_LDC_SB_G2
3224 ENUMDOC
3225   ARM group relocations.
3226
3227 ENUM
3228   BFD_RELOC_ARM_V4BX
3229 ENUMDOC
3230   Annotation of BX instructions.
3231
3232 ENUM
3233   BFD_RELOC_ARM_IRELATIVE
3234 ENUMDOC
3235   ARM support for STT_GNU_IFUNC.
3236
3237 ENUM
3238   BFD_RELOC_ARM_IMMEDIATE
3239 ENUMX
3240   BFD_RELOC_ARM_ADRL_IMMEDIATE
3241 ENUMX
3242   BFD_RELOC_ARM_T32_IMMEDIATE
3243 ENUMX
3244   BFD_RELOC_ARM_T32_ADD_IMM
3245 ENUMX
3246   BFD_RELOC_ARM_T32_IMM12
3247 ENUMX
3248   BFD_RELOC_ARM_T32_ADD_PC12
3249 ENUMX
3250   BFD_RELOC_ARM_SHIFT_IMM
3251 ENUMX
3252   BFD_RELOC_ARM_SMC
3253 ENUMX
3254   BFD_RELOC_ARM_HVC
3255 ENUMX
3256   BFD_RELOC_ARM_SWI
3257 ENUMX
3258   BFD_RELOC_ARM_MULTI
3259 ENUMX
3260   BFD_RELOC_ARM_CP_OFF_IMM
3261 ENUMX
3262   BFD_RELOC_ARM_CP_OFF_IMM_S2
3263 ENUMX
3264   BFD_RELOC_ARM_T32_CP_OFF_IMM
3265 ENUMX
3266   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3267 ENUMX
3268   BFD_RELOC_ARM_ADR_IMM
3269 ENUMX
3270   BFD_RELOC_ARM_LDR_IMM
3271 ENUMX
3272   BFD_RELOC_ARM_LITERAL
3273 ENUMX
3274   BFD_RELOC_ARM_IN_POOL
3275 ENUMX
3276   BFD_RELOC_ARM_OFFSET_IMM8
3277 ENUMX
3278   BFD_RELOC_ARM_T32_OFFSET_U8
3279 ENUMX
3280   BFD_RELOC_ARM_T32_OFFSET_IMM
3281 ENUMX
3282   BFD_RELOC_ARM_HWLITERAL
3283 ENUMX
3284   BFD_RELOC_ARM_THUMB_ADD
3285 ENUMX
3286   BFD_RELOC_ARM_THUMB_IMM
3287 ENUMX
3288   BFD_RELOC_ARM_THUMB_SHIFT
3289 ENUMDOC
3290   These relocs are only used within the ARM assembler.  They are not
3291   (at present) written to any object files.
3292
3293 ENUM
3294   BFD_RELOC_SH_PCDISP8BY2
3295 ENUMX
3296   BFD_RELOC_SH_PCDISP12BY2
3297 ENUMX
3298   BFD_RELOC_SH_IMM3
3299 ENUMX
3300   BFD_RELOC_SH_IMM3U
3301 ENUMX
3302   BFD_RELOC_SH_DISP12
3303 ENUMX
3304   BFD_RELOC_SH_DISP12BY2
3305 ENUMX
3306   BFD_RELOC_SH_DISP12BY4
3307 ENUMX
3308   BFD_RELOC_SH_DISP12BY8
3309 ENUMX
3310   BFD_RELOC_SH_DISP20
3311 ENUMX
3312   BFD_RELOC_SH_DISP20BY8
3313 ENUMX
3314   BFD_RELOC_SH_IMM4
3315 ENUMX
3316   BFD_RELOC_SH_IMM4BY2
3317 ENUMX
3318   BFD_RELOC_SH_IMM4BY4
3319 ENUMX
3320   BFD_RELOC_SH_IMM8
3321 ENUMX
3322   BFD_RELOC_SH_IMM8BY2
3323 ENUMX
3324   BFD_RELOC_SH_IMM8BY4
3325 ENUMX
3326   BFD_RELOC_SH_PCRELIMM8BY2
3327 ENUMX
3328   BFD_RELOC_SH_PCRELIMM8BY4
3329 ENUMX
3330   BFD_RELOC_SH_SWITCH16
3331 ENUMX
3332   BFD_RELOC_SH_SWITCH32
3333 ENUMX
3334   BFD_RELOC_SH_USES
3335 ENUMX
3336   BFD_RELOC_SH_COUNT
3337 ENUMX
3338   BFD_RELOC_SH_ALIGN
3339 ENUMX
3340   BFD_RELOC_SH_CODE
3341 ENUMX
3342   BFD_RELOC_SH_DATA
3343 ENUMX
3344   BFD_RELOC_SH_LABEL
3345 ENUMX
3346   BFD_RELOC_SH_LOOP_START
3347 ENUMX
3348   BFD_RELOC_SH_LOOP_END
3349 ENUMX
3350   BFD_RELOC_SH_COPY
3351 ENUMX
3352   BFD_RELOC_SH_GLOB_DAT
3353 ENUMX
3354   BFD_RELOC_SH_JMP_SLOT
3355 ENUMX
3356   BFD_RELOC_SH_RELATIVE
3357 ENUMX
3358   BFD_RELOC_SH_GOTPC
3359 ENUMX
3360   BFD_RELOC_SH_GOT_LOW16
3361 ENUMX
3362   BFD_RELOC_SH_GOT_MEDLOW16
3363 ENUMX
3364   BFD_RELOC_SH_GOT_MEDHI16
3365 ENUMX
3366   BFD_RELOC_SH_GOT_HI16
3367 ENUMX
3368   BFD_RELOC_SH_GOTPLT_LOW16
3369 ENUMX
3370   BFD_RELOC_SH_GOTPLT_MEDLOW16
3371 ENUMX
3372   BFD_RELOC_SH_GOTPLT_MEDHI16
3373 ENUMX
3374   BFD_RELOC_SH_GOTPLT_HI16
3375 ENUMX
3376   BFD_RELOC_SH_PLT_LOW16
3377 ENUMX
3378   BFD_RELOC_SH_PLT_MEDLOW16
3379 ENUMX
3380   BFD_RELOC_SH_PLT_MEDHI16
3381 ENUMX
3382   BFD_RELOC_SH_PLT_HI16
3383 ENUMX
3384   BFD_RELOC_SH_GOTOFF_LOW16
3385 ENUMX
3386   BFD_RELOC_SH_GOTOFF_MEDLOW16
3387 ENUMX
3388   BFD_RELOC_SH_GOTOFF_MEDHI16
3389 ENUMX
3390   BFD_RELOC_SH_GOTOFF_HI16
3391 ENUMX
3392   BFD_RELOC_SH_GOTPC_LOW16
3393 ENUMX
3394   BFD_RELOC_SH_GOTPC_MEDLOW16
3395 ENUMX
3396   BFD_RELOC_SH_GOTPC_MEDHI16
3397 ENUMX
3398   BFD_RELOC_SH_GOTPC_HI16
3399 ENUMX
3400   BFD_RELOC_SH_COPY64
3401 ENUMX
3402   BFD_RELOC_SH_GLOB_DAT64
3403 ENUMX
3404   BFD_RELOC_SH_JMP_SLOT64
3405 ENUMX
3406   BFD_RELOC_SH_RELATIVE64
3407 ENUMX
3408   BFD_RELOC_SH_GOT10BY4
3409 ENUMX
3410   BFD_RELOC_SH_GOT10BY8
3411 ENUMX
3412   BFD_RELOC_SH_GOTPLT10BY4
3413 ENUMX
3414   BFD_RELOC_SH_GOTPLT10BY8
3415 ENUMX
3416   BFD_RELOC_SH_GOTPLT32
3417 ENUMX
3418   BFD_RELOC_SH_SHMEDIA_CODE
3419 ENUMX
3420   BFD_RELOC_SH_IMMU5
3421 ENUMX
3422   BFD_RELOC_SH_IMMS6
3423 ENUMX
3424   BFD_RELOC_SH_IMMS6BY32
3425 ENUMX
3426   BFD_RELOC_SH_IMMU6
3427 ENUMX
3428   BFD_RELOC_SH_IMMS10
3429 ENUMX
3430   BFD_RELOC_SH_IMMS10BY2
3431 ENUMX
3432   BFD_RELOC_SH_IMMS10BY4
3433 ENUMX
3434   BFD_RELOC_SH_IMMS10BY8
3435 ENUMX
3436   BFD_RELOC_SH_IMMS16
3437 ENUMX
3438   BFD_RELOC_SH_IMMU16
3439 ENUMX
3440   BFD_RELOC_SH_IMM_LOW16
3441 ENUMX
3442   BFD_RELOC_SH_IMM_LOW16_PCREL
3443 ENUMX
3444   BFD_RELOC_SH_IMM_MEDLOW16
3445 ENUMX
3446   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3447 ENUMX
3448   BFD_RELOC_SH_IMM_MEDHI16
3449 ENUMX
3450   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3451 ENUMX
3452   BFD_RELOC_SH_IMM_HI16
3453 ENUMX
3454   BFD_RELOC_SH_IMM_HI16_PCREL
3455 ENUMX
3456   BFD_RELOC_SH_PT_16
3457 ENUMX
3458   BFD_RELOC_SH_TLS_GD_32
3459 ENUMX
3460   BFD_RELOC_SH_TLS_LD_32
3461 ENUMX
3462   BFD_RELOC_SH_TLS_LDO_32
3463 ENUMX
3464   BFD_RELOC_SH_TLS_IE_32
3465 ENUMX
3466   BFD_RELOC_SH_TLS_LE_32
3467 ENUMX
3468   BFD_RELOC_SH_TLS_DTPMOD32
3469 ENUMX
3470   BFD_RELOC_SH_TLS_DTPOFF32
3471 ENUMX
3472   BFD_RELOC_SH_TLS_TPOFF32
3473 ENUMX
3474   BFD_RELOC_SH_GOT20
3475 ENUMX
3476   BFD_RELOC_SH_GOTOFF20
3477 ENUMX
3478   BFD_RELOC_SH_GOTFUNCDESC
3479 ENUMX
3480   BFD_RELOC_SH_GOTFUNCDESC20
3481 ENUMX
3482   BFD_RELOC_SH_GOTOFFFUNCDESC
3483 ENUMX
3484   BFD_RELOC_SH_GOTOFFFUNCDESC20
3485 ENUMX
3486   BFD_RELOC_SH_FUNCDESC
3487 ENUMDOC
3488   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3489
3490 ENUM
3491   BFD_RELOC_ARC_B22_PCREL
3492 ENUMDOC
3493   ARC Cores relocs.
3494   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3495   not stored in the instruction.  The high 20 bits are installed in bits 26
3496   through 7 of the instruction.
3497 ENUM
3498   BFD_RELOC_ARC_B26
3499 ENUMDOC
3500   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3501   stored in the instruction.  The high 24 bits are installed in bits 23
3502   through 0.
3503
3504 ENUM
3505   BFD_RELOC_BFIN_16_IMM
3506 ENUMDOC
3507   ADI Blackfin 16 bit immediate absolute reloc.
3508 ENUM
3509   BFD_RELOC_BFIN_16_HIGH
3510 ENUMDOC
3511   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3512 ENUM
3513   BFD_RELOC_BFIN_4_PCREL
3514 ENUMDOC
3515   ADI Blackfin 'a' part of LSETUP.
3516 ENUM
3517   BFD_RELOC_BFIN_5_PCREL
3518 ENUMDOC
3519   ADI Blackfin.
3520 ENUM
3521   BFD_RELOC_BFIN_16_LOW
3522 ENUMDOC
3523   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3524 ENUM
3525   BFD_RELOC_BFIN_10_PCREL
3526 ENUMDOC
3527   ADI Blackfin.
3528 ENUM
3529   BFD_RELOC_BFIN_11_PCREL
3530 ENUMDOC
3531   ADI Blackfin 'b' part of LSETUP.
3532 ENUM
3533   BFD_RELOC_BFIN_12_PCREL_JUMP
3534 ENUMDOC
3535   ADI Blackfin.
3536 ENUM
3537   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3538 ENUMDOC
3539   ADI Blackfin Short jump, pcrel.
3540 ENUM
3541   BFD_RELOC_BFIN_24_PCREL_CALL_X
3542 ENUMDOC
3543   ADI Blackfin Call.x not implemented.
3544 ENUM
3545   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3546 ENUMDOC
3547   ADI Blackfin Long Jump pcrel.
3548 ENUM
3549   BFD_RELOC_BFIN_GOT17M4
3550 ENUMX
3551   BFD_RELOC_BFIN_GOTHI
3552 ENUMX
3553   BFD_RELOC_BFIN_GOTLO
3554 ENUMX
3555   BFD_RELOC_BFIN_FUNCDESC
3556 ENUMX
3557   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3558 ENUMX
3559   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3560 ENUMX
3561   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3562 ENUMX
3563   BFD_RELOC_BFIN_FUNCDESC_VALUE
3564 ENUMX
3565   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3566 ENUMX
3567   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3568 ENUMX
3569   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3570 ENUMX
3571   BFD_RELOC_BFIN_GOTOFF17M4
3572 ENUMX
3573   BFD_RELOC_BFIN_GOTOFFHI
3574 ENUMX
3575   BFD_RELOC_BFIN_GOTOFFLO
3576 ENUMDOC
3577   ADI Blackfin FD-PIC relocations.
3578 ENUM
3579   BFD_RELOC_BFIN_GOT
3580 ENUMDOC
3581   ADI Blackfin GOT relocation.
3582 ENUM
3583   BFD_RELOC_BFIN_PLTPC
3584 ENUMDOC
3585   ADI Blackfin PLTPC relocation.
3586 ENUM
3587   BFD_ARELOC_BFIN_PUSH
3588 ENUMDOC
3589   ADI Blackfin arithmetic relocation.
3590 ENUM
3591   BFD_ARELOC_BFIN_CONST
3592 ENUMDOC
3593   ADI Blackfin arithmetic relocation.
3594 ENUM
3595   BFD_ARELOC_BFIN_ADD
3596 ENUMDOC
3597   ADI Blackfin arithmetic relocation.
3598 ENUM
3599   BFD_ARELOC_BFIN_SUB
3600 ENUMDOC
3601   ADI Blackfin arithmetic relocation.
3602 ENUM
3603   BFD_ARELOC_BFIN_MULT
3604 ENUMDOC
3605   ADI Blackfin arithmetic relocation.
3606 ENUM
3607   BFD_ARELOC_BFIN_DIV
3608 ENUMDOC
3609   ADI Blackfin arithmetic relocation.
3610 ENUM
3611   BFD_ARELOC_BFIN_MOD
3612 ENUMDOC
3613   ADI Blackfin arithmetic relocation.
3614 ENUM
3615   BFD_ARELOC_BFIN_LSHIFT
3616 ENUMDOC
3617   ADI Blackfin arithmetic relocation.
3618 ENUM
3619   BFD_ARELOC_BFIN_RSHIFT
3620 ENUMDOC
3621   ADI Blackfin arithmetic relocation.
3622 ENUM
3623   BFD_ARELOC_BFIN_AND
3624 ENUMDOC
3625   ADI Blackfin arithmetic relocation.
3626 ENUM
3627   BFD_ARELOC_BFIN_OR
3628 ENUMDOC
3629   ADI Blackfin arithmetic relocation.
3630 ENUM
3631   BFD_ARELOC_BFIN_XOR
3632 ENUMDOC
3633   ADI Blackfin arithmetic relocation.
3634 ENUM
3635   BFD_ARELOC_BFIN_LAND
3636 ENUMDOC
3637   ADI Blackfin arithmetic relocation.
3638 ENUM
3639   BFD_ARELOC_BFIN_LOR
3640 ENUMDOC
3641   ADI Blackfin arithmetic relocation.
3642 ENUM
3643   BFD_ARELOC_BFIN_LEN
3644 ENUMDOC
3645   ADI Blackfin arithmetic relocation.
3646 ENUM
3647   BFD_ARELOC_BFIN_NEG
3648 ENUMDOC
3649   ADI Blackfin arithmetic relocation.
3650 ENUM
3651   BFD_ARELOC_BFIN_COMP
3652 ENUMDOC
3653   ADI Blackfin arithmetic relocation.
3654 ENUM
3655   BFD_ARELOC_BFIN_PAGE
3656 ENUMDOC
3657   ADI Blackfin arithmetic relocation.
3658 ENUM
3659   BFD_ARELOC_BFIN_HWPAGE
3660 ENUMDOC
3661   ADI Blackfin arithmetic relocation.
3662 ENUM
3663   BFD_ARELOC_BFIN_ADDR
3664 ENUMDOC
3665   ADI Blackfin arithmetic relocation.
3666
3667 ENUM
3668   BFD_RELOC_D10V_10_PCREL_R
3669 ENUMDOC
3670   Mitsubishi D10V relocs.
3671   This is a 10-bit reloc with the right 2 bits
3672   assumed to be 0.
3673 ENUM
3674   BFD_RELOC_D10V_10_PCREL_L
3675 ENUMDOC
3676   Mitsubishi D10V relocs.
3677   This is a 10-bit reloc with the right 2 bits
3678   assumed to be 0.  This is the same as the previous reloc
3679   except it is in the left container, i.e.,
3680   shifted left 15 bits.
3681 ENUM
3682   BFD_RELOC_D10V_18
3683 ENUMDOC
3684   This is an 18-bit reloc with the right 2 bits
3685   assumed to be 0.
3686 ENUM
3687   BFD_RELOC_D10V_18_PCREL
3688 ENUMDOC
3689   This is an 18-bit reloc with the right 2 bits
3690   assumed to be 0.
3691
3692 ENUM
3693   BFD_RELOC_D30V_6
3694 ENUMDOC
3695   Mitsubishi D30V relocs.
3696   This is a 6-bit absolute reloc.
3697 ENUM
3698   BFD_RELOC_D30V_9_PCREL
3699 ENUMDOC
3700   This is a 6-bit pc-relative reloc with
3701   the right 3 bits assumed to be 0.
3702 ENUM
3703   BFD_RELOC_D30V_9_PCREL_R
3704 ENUMDOC
3705   This is a 6-bit pc-relative reloc with
3706   the right 3 bits assumed to be 0. Same
3707   as the previous reloc but on the right side
3708   of the container.
3709 ENUM
3710   BFD_RELOC_D30V_15
3711 ENUMDOC
3712   This is a 12-bit absolute reloc with the
3713   right 3 bitsassumed to be 0.
3714 ENUM
3715   BFD_RELOC_D30V_15_PCREL
3716 ENUMDOC
3717   This is a 12-bit pc-relative reloc with
3718   the right 3 bits assumed to be 0.
3719 ENUM
3720   BFD_RELOC_D30V_15_PCREL_R
3721 ENUMDOC
3722   This is a 12-bit pc-relative reloc with
3723   the right 3 bits assumed to be 0. Same
3724   as the previous reloc but on the right side
3725   of the container.
3726 ENUM
3727   BFD_RELOC_D30V_21
3728 ENUMDOC
3729   This is an 18-bit absolute reloc with
3730   the right 3 bits assumed to be 0.
3731 ENUM
3732   BFD_RELOC_D30V_21_PCREL
3733 ENUMDOC
3734   This is an 18-bit pc-relative reloc with
3735   the right 3 bits assumed to be 0.
3736 ENUM
3737   BFD_RELOC_D30V_21_PCREL_R
3738 ENUMDOC
3739   This is an 18-bit pc-relative reloc with
3740   the right 3 bits assumed to be 0. Same
3741   as the previous reloc but on the right side
3742   of the container.
3743 ENUM
3744   BFD_RELOC_D30V_32
3745 ENUMDOC
3746   This is a 32-bit absolute reloc.
3747 ENUM
3748   BFD_RELOC_D30V_32_PCREL
3749 ENUMDOC
3750   This is a 32-bit pc-relative reloc.
3751
3752 ENUM
3753   BFD_RELOC_DLX_HI16_S
3754 ENUMDOC
3755   DLX relocs
3756 ENUM
3757   BFD_RELOC_DLX_LO16
3758 ENUMDOC
3759   DLX relocs
3760 ENUM
3761   BFD_RELOC_DLX_JMP26
3762 ENUMDOC
3763   DLX relocs
3764
3765 ENUM
3766   BFD_RELOC_M32C_HI8
3767 ENUMX
3768   BFD_RELOC_M32C_RL_JUMP
3769 ENUMX
3770   BFD_RELOC_M32C_RL_1ADDR
3771 ENUMX
3772   BFD_RELOC_M32C_RL_2ADDR
3773 ENUMDOC
3774   Renesas M16C/M32C Relocations.
3775
3776 ENUM
3777   BFD_RELOC_M32R_24
3778 ENUMDOC
3779   Renesas M32R (formerly Mitsubishi M32R) relocs.
3780   This is a 24 bit absolute address.
3781 ENUM
3782   BFD_RELOC_M32R_10_PCREL
3783 ENUMDOC
3784   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3785 ENUM
3786   BFD_RELOC_M32R_18_PCREL
3787 ENUMDOC
3788   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3789 ENUM
3790   BFD_RELOC_M32R_26_PCREL
3791 ENUMDOC
3792   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3793 ENUM
3794   BFD_RELOC_M32R_HI16_ULO
3795 ENUMDOC
3796   This is a 16-bit reloc containing the high 16 bits of an address
3797   used when the lower 16 bits are treated as unsigned.
3798 ENUM
3799   BFD_RELOC_M32R_HI16_SLO
3800 ENUMDOC
3801   This is a 16-bit reloc containing the high 16 bits of an address
3802   used when the lower 16 bits are treated as signed.
3803 ENUM
3804   BFD_RELOC_M32R_LO16
3805 ENUMDOC
3806   This is a 16-bit reloc containing the lower 16 bits of an address.
3807 ENUM
3808   BFD_RELOC_M32R_SDA16
3809 ENUMDOC
3810   This is a 16-bit reloc containing the small data area offset for use in
3811   add3, load, and store instructions.
3812 ENUM
3813   BFD_RELOC_M32R_GOT24
3814 ENUMX
3815   BFD_RELOC_M32R_26_PLTREL
3816 ENUMX
3817   BFD_RELOC_M32R_COPY
3818 ENUMX
3819   BFD_RELOC_M32R_GLOB_DAT
3820 ENUMX
3821   BFD_RELOC_M32R_JMP_SLOT
3822 ENUMX
3823   BFD_RELOC_M32R_RELATIVE
3824 ENUMX
3825   BFD_RELOC_M32R_GOTOFF
3826 ENUMX
3827   BFD_RELOC_M32R_GOTOFF_HI_ULO
3828 ENUMX
3829   BFD_RELOC_M32R_GOTOFF_HI_SLO
3830 ENUMX
3831   BFD_RELOC_M32R_GOTOFF_LO
3832 ENUMX
3833   BFD_RELOC_M32R_GOTPC24
3834 ENUMX
3835   BFD_RELOC_M32R_GOT16_HI_ULO
3836 ENUMX
3837   BFD_RELOC_M32R_GOT16_HI_SLO
3838 ENUMX
3839   BFD_RELOC_M32R_GOT16_LO
3840 ENUMX
3841   BFD_RELOC_M32R_GOTPC_HI_ULO
3842 ENUMX
3843   BFD_RELOC_M32R_GOTPC_HI_SLO
3844 ENUMX
3845   BFD_RELOC_M32R_GOTPC_LO
3846 ENUMDOC
3847   For PIC.
3848
3849
3850 ENUM
3851   BFD_RELOC_NDS32_20
3852 ENUMDOC
3853   NDS32 relocs.
3854   This is a 20 bit absolute address.
3855 ENUM
3856   BFD_RELOC_NDS32_9_PCREL
3857 ENUMDOC
3858   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
3859 ENUM
3860   BFD_RELOC_NDS32_WORD_9_PCREL
3861 ENUMDOC
3862   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
3863 ENUM
3864   BFD_RELOC_NDS32_15_PCREL
3865 ENUMDOC
3866   This is an 15-bit reloc with the right 1 bit assumed to be 0.
3867 ENUM
3868   BFD_RELOC_NDS32_17_PCREL
3869 ENUMDOC
3870   This is an 17-bit reloc with the right 1 bit assumed to be 0.
3871 ENUM
3872   BFD_RELOC_NDS32_25_PCREL
3873 ENUMDOC
3874   This is a 25-bit reloc with the right 1 bit assumed to be 0.
3875 ENUM
3876   BFD_RELOC_NDS32_HI20
3877 ENUMDOC
3878   This is a 20-bit reloc containing the high 20 bits of an address
3879   used with the lower 12 bits
3880 ENUM
3881   BFD_RELOC_NDS32_LO12S3
3882 ENUMDOC
3883   This is a 12-bit reloc containing the lower 12 bits of an address
3884   then shift right by 3. This is used with ldi,sdi...
3885 ENUM
3886   BFD_RELOC_NDS32_LO12S2
3887 ENUMDOC
3888   This is a 12-bit reloc containing the lower 12 bits of an address
3889   then shift left by 2. This is used with lwi,swi...
3890 ENUM
3891   BFD_RELOC_NDS32_LO12S1
3892 ENUMDOC
3893   This is a 12-bit reloc containing the lower 12 bits of an address
3894   then shift left by 1. This is used with lhi,shi...
3895 ENUM
3896   BFD_RELOC_NDS32_LO12S0
3897 ENUMDOC
3898   This is a 12-bit reloc containing the lower 12 bits of an address
3899   then shift left by 0. This is used with lbisbi...
3900 ENUM
3901   BFD_RELOC_NDS32_LO12S0_ORI
3902 ENUMDOC
3903   This is a 12-bit reloc containing the lower 12 bits of an address
3904   then shift left by 0. This is only used with branch relaxations
3905 ENUM
3906   BFD_RELOC_NDS32_SDA15S3
3907 ENUMDOC
3908   This is a 15-bit reloc containing the small data area 18-bit signed offset
3909   and shift left by 3 for use in ldi, sdi...
3910 ENUM
3911   BFD_RELOC_NDS32_SDA15S2
3912 ENUMDOC
3913   This is a 15-bit reloc containing the small data area 17-bit signed offset
3914   and shift left by 2 for use in lwi, swi...
3915 ENUM
3916   BFD_RELOC_NDS32_SDA15S1
3917 ENUMDOC
3918   This is a 15-bit reloc containing the small data area 16-bit signed offset
3919   and shift left by 1 for use in lhi, shi...
3920 ENUM
3921   BFD_RELOC_NDS32_SDA15S0
3922 ENUMDOC
3923   This is a 15-bit reloc containing the small data area 15-bit signed offset
3924   and shift left by 0 for use in lbi, sbi...
3925 ENUM
3926   BFD_RELOC_NDS32_SDA16S3
3927 ENUMDOC
3928   This is a 16-bit reloc containing the small data area 16-bit signed offset
3929   and shift left by 3
3930 ENUM
3931   BFD_RELOC_NDS32_SDA17S2
3932 ENUMDOC
3933   This is a 17-bit reloc containing the small data area 17-bit signed offset
3934   and shift left by 2 for use in lwi.gp, swi.gp...
3935 ENUM
3936   BFD_RELOC_NDS32_SDA18S1
3937 ENUMDOC
3938   This is a 18-bit reloc containing the small data area 18-bit signed offset
3939   and shift left by 1 for use in lhi.gp, shi.gp...
3940 ENUM
3941   BFD_RELOC_NDS32_SDA19S0
3942 ENUMDOC
3943   This is a 19-bit reloc containing the small data area 19-bit signed offset
3944   and shift left by 0 for use in lbi.gp, sbi.gp...
3945 ENUM
3946   BFD_RELOC_NDS32_GOT20
3947 ENUMX
3948   BFD_RELOC_NDS32_9_PLTREL
3949 ENUMX
3950   BFD_RELOC_NDS32_25_PLTREL
3951 ENUMX
3952   BFD_RELOC_NDS32_COPY
3953 ENUMX
3954   BFD_RELOC_NDS32_GLOB_DAT
3955 ENUMX
3956   BFD_RELOC_NDS32_JMP_SLOT
3957 ENUMX
3958   BFD_RELOC_NDS32_RELATIVE
3959 ENUMX
3960   BFD_RELOC_NDS32_GOTOFF
3961 ENUMX
3962   BFD_RELOC_NDS32_GOTOFF_HI20
3963 ENUMX
3964   BFD_RELOC_NDS32_GOTOFF_LO12
3965 ENUMX
3966   BFD_RELOC_NDS32_GOTPC20
3967 ENUMX
3968   BFD_RELOC_NDS32_GOT_HI20
3969 ENUMX
3970   BFD_RELOC_NDS32_GOT_LO12
3971 ENUMX
3972   BFD_RELOC_NDS32_GOTPC_HI20
3973 ENUMX
3974   BFD_RELOC_NDS32_GOTPC_LO12
3975 ENUMDOC
3976   for PIC
3977 ENUM
3978   BFD_RELOC_NDS32_INSN16
3979 ENUMX
3980   BFD_RELOC_NDS32_LABEL
3981 ENUMX
3982   BFD_RELOC_NDS32_LONGCALL1
3983 ENUMX
3984   BFD_RELOC_NDS32_LONGCALL2
3985 ENUMX
3986   BFD_RELOC_NDS32_LONGCALL3
3987 ENUMX
3988   BFD_RELOC_NDS32_LONGJUMP1
3989 ENUMX
3990   BFD_RELOC_NDS32_LONGJUMP2
3991 ENUMX
3992   BFD_RELOC_NDS32_LONGJUMP3
3993 ENUMX
3994   BFD_RELOC_NDS32_LOADSTORE
3995 ENUMX
3996   BFD_RELOC_NDS32_9_FIXED
3997 ENUMX
3998   BFD_RELOC_NDS32_15_FIXED
3999 ENUMX
4000   BFD_RELOC_NDS32_17_FIXED
4001 ENUMX
4002   BFD_RELOC_NDS32_25_FIXED
4003 ENUMX
4004   BFD_RELOC_NDS32_LONGCALL4
4005 ENUMX
4006   BFD_RELOC_NDS32_LONGCALL5
4007 ENUMX
4008   BFD_RELOC_NDS32_LONGCALL6
4009 ENUMX
4010   BFD_RELOC_NDS32_LONGJUMP4
4011 ENUMX
4012   BFD_RELOC_NDS32_LONGJUMP5
4013 ENUMX
4014   BFD_RELOC_NDS32_LONGJUMP6
4015 ENUMX
4016   BFD_RELOC_NDS32_LONGJUMP7
4017 ENUMDOC
4018   for relax
4019 ENUM
4020   BFD_RELOC_NDS32_PLTREL_HI20
4021 ENUMX
4022   BFD_RELOC_NDS32_PLTREL_LO12
4023 ENUMX
4024   BFD_RELOC_NDS32_PLT_GOTREL_HI20
4025 ENUMX
4026   BFD_RELOC_NDS32_PLT_GOTREL_LO12
4027 ENUMDOC
4028   for PIC
4029 ENUM
4030   BFD_RELOC_NDS32_SDA12S2_DP
4031 ENUMX
4032   BFD_RELOC_NDS32_SDA12S2_SP
4033 ENUMX
4034   BFD_RELOC_NDS32_LO12S2_DP
4035 ENUMX
4036   BFD_RELOC_NDS32_LO12S2_SP
4037 ENUMDOC
4038   for floating point
4039 ENUM
4040   BFD_RELOC_NDS32_DWARF2_OP1
4041 ENUMX
4042   BFD_RELOC_NDS32_DWARF2_OP2
4043 ENUMX
4044   BFD_RELOC_NDS32_DWARF2_LEB
4045 ENUMDOC
4046   for dwarf2 debug_line.
4047 ENUM
4048   BFD_RELOC_NDS32_UPDATE_TA
4049 ENUMDOC
4050   for eliminate 16-bit instructions
4051 ENUM
4052   BFD_RELOC_NDS32_PLT_GOTREL_LO20
4053 ENUMX
4054   BFD_RELOC_NDS32_PLT_GOTREL_LO15
4055 ENUMX
4056   BFD_RELOC_NDS32_PLT_GOTREL_LO19
4057 ENUMX
4058   BFD_RELOC_NDS32_GOT_LO15
4059 ENUMX
4060   BFD_RELOC_NDS32_GOT_LO19
4061 ENUMX
4062   BFD_RELOC_NDS32_GOTOFF_LO15
4063 ENUMX
4064   BFD_RELOC_NDS32_GOTOFF_LO19
4065 ENUMX
4066   BFD_RELOC_NDS32_GOT15S2
4067 ENUMX
4068   BFD_RELOC_NDS32_GOT17S2
4069 ENUMDOC
4070   for PIC object relaxation
4071 ENUM
4072   BFD_RELOC_NDS32_5
4073 ENUMDOC
4074   NDS32 relocs.
4075   This is a 5 bit absolute address.
4076 ENUM
4077   BFD_RELOC_NDS32_10_UPCREL
4078 ENUMDOC
4079   This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4080 ENUM
4081   BFD_RELOC_NDS32_SDA_FP7U2_RELA
4082 ENUMDOC
4083   If fp were omitted, fp can used as another gp.
4084 ENUM
4085   BFD_RELOC_NDS32_RELAX_ENTRY
4086 ENUMX
4087   BFD_RELOC_NDS32_GOT_SUFF
4088 ENUMX
4089   BFD_RELOC_NDS32_GOTOFF_SUFF
4090 ENUMX
4091   BFD_RELOC_NDS32_PLT_GOT_SUFF
4092 ENUMX
4093   BFD_RELOC_NDS32_MULCALL_SUFF
4094 ENUMX
4095   BFD_RELOC_NDS32_PTR
4096 ENUMX
4097   BFD_RELOC_NDS32_PTR_COUNT
4098 ENUMX
4099   BFD_RELOC_NDS32_PTR_RESOLVED
4100 ENUMX
4101   BFD_RELOC_NDS32_PLTBLOCK
4102 ENUMX
4103   BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4104 ENUMX
4105   BFD_RELOC_NDS32_RELAX_REGION_END
4106 ENUMX
4107   BFD_RELOC_NDS32_MINUEND
4108 ENUMX
4109   BFD_RELOC_NDS32_SUBTRAHEND
4110 ENUMX
4111   BFD_RELOC_NDS32_DIFF8
4112 ENUMX
4113   BFD_RELOC_NDS32_DIFF16
4114 ENUMX
4115   BFD_RELOC_NDS32_DIFF32
4116 ENUMX
4117   BFD_RELOC_NDS32_DIFF_ULEB128
4118 ENUMX
4119   BFD_RELOC_NDS32_EMPTY
4120 ENUMDOC
4121   relaxation relative relocation types
4122 ENUM
4123   BFD_RELOC_NDS32_25_ABS
4124 ENUMDOC
4125   This is a 25 bit absolute address.
4126 ENUM
4127   BFD_RELOC_NDS32_DATA
4128 ENUMX
4129   BFD_RELOC_NDS32_TRAN
4130 ENUMX
4131   BFD_RELOC_NDS32_17IFC_PCREL
4132 ENUMX
4133   BFD_RELOC_NDS32_10IFCU_PCREL
4134 ENUMDOC
4135   For ex9 and ifc using.
4136 ENUM
4137   BFD_RELOC_NDS32_TPOFF
4138 ENUMX
4139   BFD_RELOC_NDS32_TLS_LE_HI20
4140 ENUMX
4141   BFD_RELOC_NDS32_TLS_LE_LO12
4142 ENUMX
4143   BFD_RELOC_NDS32_TLS_LE_ADD
4144 ENUMX
4145   BFD_RELOC_NDS32_TLS_LE_LS
4146 ENUMX
4147   BFD_RELOC_NDS32_GOTTPOFF
4148 ENUMX
4149   BFD_RELOC_NDS32_TLS_IE_HI20
4150 ENUMX
4151   BFD_RELOC_NDS32_TLS_IE_LO12S2
4152 ENUMX
4153   BFD_RELOC_NDS32_TLS_TPOFF
4154 ENUMX
4155   BFD_RELOC_NDS32_TLS_LE_20
4156 ENUMX
4157   BFD_RELOC_NDS32_TLS_LE_15S0
4158 ENUMX
4159   BFD_RELOC_NDS32_TLS_LE_15S1
4160 ENUMX
4161   BFD_RELOC_NDS32_TLS_LE_15S2
4162 ENUMDOC
4163   For TLS.
4164
4165
4166 ENUM
4167   BFD_RELOC_V850_9_PCREL
4168 ENUMDOC
4169   This is a 9-bit reloc
4170 ENUM
4171   BFD_RELOC_V850_22_PCREL
4172 ENUMDOC
4173   This is a 22-bit reloc
4174
4175 ENUM
4176   BFD_RELOC_V850_SDA_16_16_OFFSET
4177 ENUMDOC
4178   This is a 16 bit offset from the short data area pointer.
4179 ENUM
4180   BFD_RELOC_V850_SDA_15_16_OFFSET
4181 ENUMDOC
4182   This is a 16 bit offset (of which only 15 bits are used) from the
4183   short data area pointer.
4184 ENUM
4185   BFD_RELOC_V850_ZDA_16_16_OFFSET
4186 ENUMDOC
4187   This is a 16 bit offset from the zero data area pointer.
4188 ENUM
4189   BFD_RELOC_V850_ZDA_15_16_OFFSET
4190 ENUMDOC
4191   This is a 16 bit offset (of which only 15 bits are used) from the
4192   zero data area pointer.
4193 ENUM
4194   BFD_RELOC_V850_TDA_6_8_OFFSET
4195 ENUMDOC
4196   This is an 8 bit offset (of which only 6 bits are used) from the
4197   tiny data area pointer.
4198 ENUM
4199   BFD_RELOC_V850_TDA_7_8_OFFSET
4200 ENUMDOC
4201   This is an 8bit offset (of which only 7 bits are used) from the tiny
4202   data area pointer.
4203 ENUM
4204   BFD_RELOC_V850_TDA_7_7_OFFSET
4205 ENUMDOC
4206   This is a 7 bit offset from the tiny data area pointer.
4207 ENUM
4208   BFD_RELOC_V850_TDA_16_16_OFFSET
4209 ENUMDOC
4210   This is a 16 bit offset from the tiny data area pointer.
4211 COMMENT
4212 ENUM
4213   BFD_RELOC_V850_TDA_4_5_OFFSET
4214 ENUMDOC
4215   This is a 5 bit offset (of which only 4 bits are used) from the tiny
4216   data area pointer.
4217 ENUM
4218   BFD_RELOC_V850_TDA_4_4_OFFSET
4219 ENUMDOC
4220   This is a 4 bit offset from the tiny data area pointer.
4221 ENUM
4222   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4223 ENUMDOC
4224   This is a 16 bit offset from the short data area pointer, with the
4225   bits placed non-contiguously in the instruction.
4226 ENUM
4227   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4228 ENUMDOC
4229   This is a 16 bit offset from the zero data area pointer, with the
4230   bits placed non-contiguously in the instruction.
4231 ENUM
4232   BFD_RELOC_V850_CALLT_6_7_OFFSET
4233 ENUMDOC
4234   This is a 6 bit offset from the call table base pointer.
4235 ENUM
4236   BFD_RELOC_V850_CALLT_16_16_OFFSET
4237 ENUMDOC
4238   This is a 16 bit offset from the call table base pointer.
4239 ENUM
4240   BFD_RELOC_V850_LONGCALL
4241 ENUMDOC
4242   Used for relaxing indirect function calls.
4243 ENUM
4244   BFD_RELOC_V850_LONGJUMP
4245 ENUMDOC
4246   Used for relaxing indirect jumps.
4247 ENUM
4248   BFD_RELOC_V850_ALIGN
4249 ENUMDOC
4250   Used to maintain alignment whilst relaxing.
4251 ENUM
4252   BFD_RELOC_V850_LO16_SPLIT_OFFSET
4253 ENUMDOC
4254   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4255   instructions.
4256 ENUM
4257   BFD_RELOC_V850_16_PCREL
4258 ENUMDOC
4259   This is a 16-bit reloc.
4260 ENUM
4261   BFD_RELOC_V850_17_PCREL
4262 ENUMDOC
4263   This is a 17-bit reloc.
4264 ENUM
4265   BFD_RELOC_V850_23
4266 ENUMDOC
4267   This is a 23-bit reloc.
4268 ENUM
4269   BFD_RELOC_V850_32_PCREL
4270 ENUMDOC
4271   This is a 32-bit reloc.
4272 ENUM
4273   BFD_RELOC_V850_32_ABS
4274 ENUMDOC
4275   This is a 32-bit reloc.
4276 ENUM
4277   BFD_RELOC_V850_16_SPLIT_OFFSET
4278 ENUMDOC
4279   This is a 16-bit reloc.
4280 ENUM
4281   BFD_RELOC_V850_16_S1
4282 ENUMDOC
4283   This is a 16-bit reloc.
4284 ENUM
4285   BFD_RELOC_V850_LO16_S1
4286 ENUMDOC
4287   Low 16 bits. 16 bit shifted by 1.
4288 ENUM
4289   BFD_RELOC_V850_CALLT_15_16_OFFSET
4290 ENUMDOC
4291   This is a 16 bit offset from the call table base pointer.
4292 ENUM
4293   BFD_RELOC_V850_32_GOTPCREL
4294 ENUMDOC
4295   DSO relocations.
4296 ENUM
4297   BFD_RELOC_V850_16_GOT
4298 ENUMDOC
4299   DSO relocations.
4300 ENUM
4301   BFD_RELOC_V850_32_GOT
4302 ENUMDOC
4303   DSO relocations.
4304 ENUM
4305   BFD_RELOC_V850_22_PLT_PCREL
4306 ENUMDOC
4307   DSO relocations.
4308 ENUM
4309   BFD_RELOC_V850_32_PLT_PCREL
4310 ENUMDOC
4311   DSO relocations.
4312 ENUM
4313   BFD_RELOC_V850_COPY
4314 ENUMDOC
4315   DSO relocations.
4316 ENUM
4317   BFD_RELOC_V850_GLOB_DAT
4318 ENUMDOC
4319   DSO relocations.
4320 ENUM
4321   BFD_RELOC_V850_JMP_SLOT
4322 ENUMDOC
4323   DSO relocations.
4324 ENUM
4325   BFD_RELOC_V850_RELATIVE
4326 ENUMDOC
4327   DSO relocations.
4328 ENUM
4329   BFD_RELOC_V850_16_GOTOFF
4330 ENUMDOC
4331   DSO relocations.
4332 ENUM
4333   BFD_RELOC_V850_32_GOTOFF
4334 ENUMDOC
4335   DSO relocations.
4336 ENUM
4337   BFD_RELOC_V850_CODE
4338 ENUMDOC
4339   start code.
4340 ENUM
4341   BFD_RELOC_V850_DATA
4342 ENUMDOC
4343   start data in text.
4344
4345 ENUM
4346   BFD_RELOC_TIC30_LDP
4347 ENUMDOC
4348   This is a 8bit DP reloc for the tms320c30, where the most
4349   significant 8 bits of a 24 bit word are placed into the least
4350   significant 8 bits of the opcode.
4351
4352 ENUM
4353   BFD_RELOC_TIC54X_PARTLS7
4354 ENUMDOC
4355   This is a 7bit reloc for the tms320c54x, where the least
4356   significant 7 bits of a 16 bit word are placed into the least
4357   significant 7 bits of the opcode.
4358
4359 ENUM
4360   BFD_RELOC_TIC54X_PARTMS9
4361 ENUMDOC
4362   This is a 9bit DP reloc for the tms320c54x, where the most
4363   significant 9 bits of a 16 bit word are placed into the least
4364   significant 9 bits of the opcode.
4365
4366 ENUM
4367   BFD_RELOC_TIC54X_23
4368 ENUMDOC
4369   This is an extended address 23-bit reloc for the tms320c54x.
4370
4371 ENUM
4372   BFD_RELOC_TIC54X_16_OF_23
4373 ENUMDOC
4374   This is a 16-bit reloc for the tms320c54x, where the least
4375   significant 16 bits of a 23-bit extended address are placed into
4376   the opcode.
4377
4378 ENUM
4379   BFD_RELOC_TIC54X_MS7_OF_23
4380 ENUMDOC
4381   This is a reloc for the tms320c54x, where the most
4382   significant 7 bits of a 23-bit extended address are placed into
4383   the opcode.
4384
4385 ENUM
4386   BFD_RELOC_C6000_PCR_S21
4387 ENUMX
4388   BFD_RELOC_C6000_PCR_S12
4389 ENUMX
4390   BFD_RELOC_C6000_PCR_S10
4391 ENUMX
4392   BFD_RELOC_C6000_PCR_S7
4393 ENUMX
4394   BFD_RELOC_C6000_ABS_S16
4395 ENUMX
4396   BFD_RELOC_C6000_ABS_L16
4397 ENUMX
4398   BFD_RELOC_C6000_ABS_H16
4399 ENUMX
4400   BFD_RELOC_C6000_SBR_U15_B
4401 ENUMX
4402   BFD_RELOC_C6000_SBR_U15_H
4403 ENUMX
4404   BFD_RELOC_C6000_SBR_U15_W
4405 ENUMX
4406   BFD_RELOC_C6000_SBR_S16
4407 ENUMX
4408   BFD_RELOC_C6000_SBR_L16_B
4409 ENUMX
4410   BFD_RELOC_C6000_SBR_L16_H
4411 ENUMX
4412   BFD_RELOC_C6000_SBR_L16_W
4413 ENUMX
4414   BFD_RELOC_C6000_SBR_H16_B
4415 ENUMX
4416   BFD_RELOC_C6000_SBR_H16_H
4417 ENUMX
4418   BFD_RELOC_C6000_SBR_H16_W
4419 ENUMX
4420   BFD_RELOC_C6000_SBR_GOT_U15_W
4421 ENUMX
4422   BFD_RELOC_C6000_SBR_GOT_L16_W
4423 ENUMX
4424   BFD_RELOC_C6000_SBR_GOT_H16_W
4425 ENUMX
4426   BFD_RELOC_C6000_DSBT_INDEX
4427 ENUMX
4428   BFD_RELOC_C6000_PREL31
4429 ENUMX
4430   BFD_RELOC_C6000_COPY
4431 ENUMX
4432   BFD_RELOC_C6000_JUMP_SLOT
4433 ENUMX
4434   BFD_RELOC_C6000_EHTYPE
4435 ENUMX
4436   BFD_RELOC_C6000_PCR_H16
4437 ENUMX
4438   BFD_RELOC_C6000_PCR_L16
4439 ENUMX
4440   BFD_RELOC_C6000_ALIGN
4441 ENUMX
4442   BFD_RELOC_C6000_FPHEAD
4443 ENUMX
4444   BFD_RELOC_C6000_NOCMP
4445 ENUMDOC
4446   TMS320C6000 relocations.
4447
4448 ENUM
4449   BFD_RELOC_FR30_48
4450 ENUMDOC
4451   This is a 48 bit reloc for the FR30 that stores 32 bits.
4452 ENUM
4453   BFD_RELOC_FR30_20
4454 ENUMDOC
4455   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4456   two sections.
4457 ENUM
4458   BFD_RELOC_FR30_6_IN_4
4459 ENUMDOC
4460   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4461   4 bits.
4462 ENUM
4463   BFD_RELOC_FR30_8_IN_8
4464 ENUMDOC
4465   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4466   into 8 bits.
4467 ENUM
4468   BFD_RELOC_FR30_9_IN_8
4469 ENUMDOC
4470   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4471   into 8 bits.
4472 ENUM
4473   BFD_RELOC_FR30_10_IN_8
4474 ENUMDOC
4475   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4476   into 8 bits.
4477 ENUM
4478   BFD_RELOC_FR30_9_PCREL
4479 ENUMDOC
4480   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4481   short offset into 8 bits.
4482 ENUM
4483   BFD_RELOC_FR30_12_PCREL
4484 ENUMDOC
4485   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4486   short offset into 11 bits.
4487
4488 ENUM
4489   BFD_RELOC_MCORE_PCREL_IMM8BY4
4490 ENUMX
4491   BFD_RELOC_MCORE_PCREL_IMM11BY2
4492 ENUMX
4493   BFD_RELOC_MCORE_PCREL_IMM4BY2
4494 ENUMX
4495   BFD_RELOC_MCORE_PCREL_32
4496 ENUMX
4497   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4498 ENUMX
4499   BFD_RELOC_MCORE_RVA
4500 ENUMDOC
4501   Motorola Mcore relocations.
4502
4503 ENUM
4504   BFD_RELOC_MEP_8
4505 ENUMX
4506   BFD_RELOC_MEP_16
4507 ENUMX
4508   BFD_RELOC_MEP_32
4509 ENUMX
4510   BFD_RELOC_MEP_PCREL8A2
4511 ENUMX
4512   BFD_RELOC_MEP_PCREL12A2
4513 ENUMX
4514   BFD_RELOC_MEP_PCREL17A2
4515 ENUMX
4516   BFD_RELOC_MEP_PCREL24A2
4517 ENUMX
4518   BFD_RELOC_MEP_PCABS24A2
4519 ENUMX
4520   BFD_RELOC_MEP_LOW16
4521 ENUMX
4522   BFD_RELOC_MEP_HI16U
4523 ENUMX
4524   BFD_RELOC_MEP_HI16S
4525 ENUMX
4526   BFD_RELOC_MEP_GPREL
4527 ENUMX
4528   BFD_RELOC_MEP_TPREL
4529 ENUMX
4530   BFD_RELOC_MEP_TPREL7
4531 ENUMX
4532   BFD_RELOC_MEP_TPREL7A2
4533 ENUMX
4534   BFD_RELOC_MEP_TPREL7A4
4535 ENUMX
4536   BFD_RELOC_MEP_UIMM24
4537 ENUMX
4538   BFD_RELOC_MEP_ADDR24A4
4539 ENUMX
4540   BFD_RELOC_MEP_GNU_VTINHERIT
4541 ENUMX
4542   BFD_RELOC_MEP_GNU_VTENTRY
4543 ENUMDOC
4544   Toshiba Media Processor Relocations.
4545 COMMENT
4546
4547 ENUM
4548   BFD_RELOC_METAG_HIADDR16
4549 ENUMX
4550   BFD_RELOC_METAG_LOADDR16
4551 ENUMX
4552   BFD_RELOC_METAG_RELBRANCH
4553 ENUMX
4554   BFD_RELOC_METAG_GETSETOFF
4555 ENUMX
4556   BFD_RELOC_METAG_HIOG
4557 ENUMX
4558   BFD_RELOC_METAG_LOOG
4559 ENUMX
4560   BFD_RELOC_METAG_REL8
4561 ENUMX
4562   BFD_RELOC_METAG_REL16
4563 ENUMX
4564   BFD_RELOC_METAG_HI16_GOTOFF
4565 ENUMX
4566   BFD_RELOC_METAG_LO16_GOTOFF
4567 ENUMX
4568   BFD_RELOC_METAG_GETSET_GOTOFF
4569 ENUMX
4570   BFD_RELOC_METAG_GETSET_GOT
4571 ENUMX
4572   BFD_RELOC_METAG_HI16_GOTPC
4573 ENUMX
4574   BFD_RELOC_METAG_LO16_GOTPC
4575 ENUMX
4576   BFD_RELOC_METAG_HI16_PLT
4577 ENUMX
4578   BFD_RELOC_METAG_LO16_PLT
4579 ENUMX
4580   BFD_RELOC_METAG_RELBRANCH_PLT
4581 ENUMX
4582   BFD_RELOC_METAG_GOTOFF
4583 ENUMX
4584   BFD_RELOC_METAG_PLT
4585 ENUMX
4586   BFD_RELOC_METAG_COPY
4587 ENUMX
4588   BFD_RELOC_METAG_JMP_SLOT
4589 ENUMX
4590   BFD_RELOC_METAG_RELATIVE
4591 ENUMX
4592   BFD_RELOC_METAG_GLOB_DAT
4593 ENUMX
4594   BFD_RELOC_METAG_TLS_GD
4595 ENUMX
4596   BFD_RELOC_METAG_TLS_LDM
4597 ENUMX
4598   BFD_RELOC_METAG_TLS_LDO_HI16
4599 ENUMX
4600   BFD_RELOC_METAG_TLS_LDO_LO16
4601 ENUMX
4602   BFD_RELOC_METAG_TLS_LDO
4603 ENUMX
4604   BFD_RELOC_METAG_TLS_IE
4605 ENUMX
4606   BFD_RELOC_METAG_TLS_IENONPIC
4607 ENUMX
4608   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4609 ENUMX
4610   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4611 ENUMX
4612   BFD_RELOC_METAG_TLS_TPOFF
4613 ENUMX
4614   BFD_RELOC_METAG_TLS_DTPMOD
4615 ENUMX
4616   BFD_RELOC_METAG_TLS_DTPOFF
4617 ENUMX
4618   BFD_RELOC_METAG_TLS_LE
4619 ENUMX
4620   BFD_RELOC_METAG_TLS_LE_HI16
4621 ENUMX
4622   BFD_RELOC_METAG_TLS_LE_LO16
4623 ENUMDOC
4624   Imagination Technologies Meta relocations.
4625
4626 ENUM
4627   BFD_RELOC_MMIX_GETA
4628 ENUMX
4629   BFD_RELOC_MMIX_GETA_1
4630 ENUMX
4631   BFD_RELOC_MMIX_GETA_2
4632 ENUMX
4633   BFD_RELOC_MMIX_GETA_3
4634 ENUMDOC
4635   These are relocations for the GETA instruction.
4636 ENUM
4637   BFD_RELOC_MMIX_CBRANCH
4638 ENUMX
4639   BFD_RELOC_MMIX_CBRANCH_J
4640 ENUMX
4641   BFD_RELOC_MMIX_CBRANCH_1
4642 ENUMX
4643   BFD_RELOC_MMIX_CBRANCH_2
4644 ENUMX
4645   BFD_RELOC_MMIX_CBRANCH_3
4646 ENUMDOC
4647   These are relocations for a conditional branch instruction.
4648 ENUM
4649   BFD_RELOC_MMIX_PUSHJ
4650 ENUMX
4651   BFD_RELOC_MMIX_PUSHJ_1
4652 ENUMX
4653   BFD_RELOC_MMIX_PUSHJ_2
4654 ENUMX
4655   BFD_RELOC_MMIX_PUSHJ_3
4656 ENUMX
4657   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4658 ENUMDOC
4659   These are relocations for the PUSHJ instruction.
4660 ENUM
4661   BFD_RELOC_MMIX_JMP
4662 ENUMX
4663   BFD_RELOC_MMIX_JMP_1
4664 ENUMX
4665   BFD_RELOC_MMIX_JMP_2
4666 ENUMX
4667   BFD_RELOC_MMIX_JMP_3
4668 ENUMDOC
4669   These are relocations for the JMP instruction.
4670 ENUM
4671   BFD_RELOC_MMIX_ADDR19
4672 ENUMDOC
4673   This is a relocation for a relative address as in a GETA instruction or
4674   a branch.
4675 ENUM
4676   BFD_RELOC_MMIX_ADDR27
4677 ENUMDOC
4678   This is a relocation for a relative address as in a JMP instruction.
4679 ENUM
4680   BFD_RELOC_MMIX_REG_OR_BYTE
4681 ENUMDOC
4682   This is a relocation for an instruction field that may be a general
4683   register or a value 0..255.
4684 ENUM
4685   BFD_RELOC_MMIX_REG
4686 ENUMDOC
4687   This is a relocation for an instruction field that may be a general
4688   register.
4689 ENUM
4690   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4691 ENUMDOC
4692   This is a relocation for two instruction fields holding a register and
4693   an offset, the equivalent of the relocation.
4694 ENUM
4695   BFD_RELOC_MMIX_LOCAL
4696 ENUMDOC
4697   This relocation is an assertion that the expression is not allocated as
4698   a global register.  It does not modify contents.
4699
4700 ENUM
4701   BFD_RELOC_AVR_7_PCREL
4702 ENUMDOC
4703   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4704   short offset into 7 bits.
4705 ENUM
4706   BFD_RELOC_AVR_13_PCREL
4707 ENUMDOC
4708   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4709   short offset into 12 bits.
4710 ENUM
4711   BFD_RELOC_AVR_16_PM
4712 ENUMDOC
4713   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4714   program memory address) into 16 bits.
4715 ENUM
4716   BFD_RELOC_AVR_LO8_LDI
4717 ENUMDOC
4718   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4719   data memory address) into 8 bit immediate value of LDI insn.
4720 ENUM
4721   BFD_RELOC_AVR_HI8_LDI
4722 ENUMDOC
4723   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4724   of data memory address) into 8 bit immediate value of LDI insn.
4725 ENUM
4726   BFD_RELOC_AVR_HH8_LDI
4727 ENUMDOC
4728   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4729   of program memory address) into 8 bit immediate value of LDI insn.
4730 ENUM
4731   BFD_RELOC_AVR_MS8_LDI
4732 ENUMDOC
4733   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4734   of 32 bit value) into 8 bit immediate value of LDI insn.
4735 ENUM
4736   BFD_RELOC_AVR_LO8_LDI_NEG
4737 ENUMDOC
4738   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4739   (usually data memory address) into 8 bit immediate value of SUBI insn.
4740 ENUM
4741   BFD_RELOC_AVR_HI8_LDI_NEG
4742 ENUMDOC
4743   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4744   (high 8 bit of data memory address) into 8 bit immediate value of
4745   SUBI insn.
4746 ENUM
4747   BFD_RELOC_AVR_HH8_LDI_NEG
4748 ENUMDOC
4749   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4750   (most high 8 bit of program memory address) into 8 bit immediate value
4751   of LDI or SUBI insn.
4752 ENUM
4753   BFD_RELOC_AVR_MS8_LDI_NEG
4754 ENUMDOC
4755   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4756   of 32 bit value) into 8 bit immediate value of LDI insn.
4757 ENUM
4758   BFD_RELOC_AVR_LO8_LDI_PM
4759 ENUMDOC
4760   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4761   command address) into 8 bit immediate value of LDI insn.
4762 ENUM
4763   BFD_RELOC_AVR_LO8_LDI_GS
4764 ENUMDOC
4765   This is a 16 bit reloc for the AVR that stores 8 bit value
4766   (command address) into 8 bit immediate value of LDI insn. If the address
4767   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4768   in the lower 128k.
4769 ENUM
4770   BFD_RELOC_AVR_HI8_LDI_PM
4771 ENUMDOC
4772   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4773   of command address) into 8 bit immediate value of LDI insn.
4774 ENUM
4775   BFD_RELOC_AVR_HI8_LDI_GS
4776 ENUMDOC
4777   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4778   of command address) into 8 bit immediate value of LDI insn.  If the address
4779   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4780   below 128k.
4781 ENUM
4782   BFD_RELOC_AVR_HH8_LDI_PM
4783 ENUMDOC
4784   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4785   of command address) into 8 bit immediate value of LDI insn.
4786 ENUM
4787   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4788 ENUMDOC
4789   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4790   (usually command address) into 8 bit immediate value of SUBI insn.
4791 ENUM
4792   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4793 ENUMDOC
4794   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4795   (high 8 bit of 16 bit command address) into 8 bit immediate value
4796   of SUBI insn.
4797 ENUM
4798   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4799 ENUMDOC
4800   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4801   (high 6 bit of 22 bit command address) into 8 bit immediate
4802   value of SUBI insn.
4803 ENUM
4804   BFD_RELOC_AVR_CALL
4805 ENUMDOC
4806   This is a 32 bit reloc for the AVR that stores 23 bit value
4807   into 22 bits.
4808 ENUM
4809   BFD_RELOC_AVR_LDI
4810 ENUMDOC
4811   This is a 16 bit reloc for the AVR that stores all needed bits
4812   for absolute addressing with ldi with overflow check to linktime
4813 ENUM
4814   BFD_RELOC_AVR_6
4815 ENUMDOC
4816   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4817   instructions
4818 ENUM
4819   BFD_RELOC_AVR_6_ADIW
4820 ENUMDOC
4821   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4822   instructions
4823 ENUM
4824   BFD_RELOC_AVR_8_LO
4825 ENUMDOC
4826   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
4827   in .byte lo8(symbol)
4828 ENUM
4829   BFD_RELOC_AVR_8_HI
4830 ENUMDOC
4831   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
4832   in .byte hi8(symbol)
4833 ENUM
4834   BFD_RELOC_AVR_8_HLO
4835 ENUMDOC
4836   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
4837   in .byte hlo8(symbol)
4838 ENUM
4839   BFD_RELOC_AVR_DIFF8
4840 ENUMX
4841   BFD_RELOC_AVR_DIFF16
4842 ENUMX
4843   BFD_RELOC_AVR_DIFF32
4844 ENUMDOC
4845   AVR relocations to mark the difference of two local symbols.
4846   These are only needed to support linker relaxation and can be ignored
4847   when not relaxing.  The field is set to the value of the difference
4848   assuming no relaxation.  The relocation encodes the position of the
4849   second symbol so the linker can determine whether to adjust the field
4850   value.
4851 ENUM
4852   BFD_RELOC_AVR_LDS_STS_16
4853 ENUMDOC
4854   This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
4855   lds and sts instructions supported only tiny core.
4856 ENUM
4857   BFD_RELOC_AVR_PORT6
4858 ENUMDOC
4859   This is a 6 bit reloc for the AVR that stores an I/O register
4860   number for the IN and OUT instructions
4861 ENUM
4862   BFD_RELOC_AVR_PORT5
4863 ENUMDOC
4864   This is a 5 bit reloc for the AVR that stores an I/O register
4865   number for the SBIC, SBIS, SBI and CBI instructions
4866 ENUM
4867   BFD_RELOC_RL78_NEG8
4868 ENUMX
4869   BFD_RELOC_RL78_NEG16
4870 ENUMX
4871   BFD_RELOC_RL78_NEG24
4872 ENUMX
4873   BFD_RELOC_RL78_NEG32
4874 ENUMX
4875   BFD_RELOC_RL78_16_OP
4876 ENUMX
4877   BFD_RELOC_RL78_24_OP
4878 ENUMX
4879   BFD_RELOC_RL78_32_OP
4880 ENUMX
4881   BFD_RELOC_RL78_8U
4882 ENUMX
4883   BFD_RELOC_RL78_16U
4884 ENUMX
4885   BFD_RELOC_RL78_24U
4886 ENUMX
4887   BFD_RELOC_RL78_DIR3U_PCREL
4888 ENUMX
4889   BFD_RELOC_RL78_DIFF
4890 ENUMX
4891   BFD_RELOC_RL78_GPRELB
4892 ENUMX
4893   BFD_RELOC_RL78_GPRELW
4894 ENUMX
4895   BFD_RELOC_RL78_GPRELL
4896 ENUMX
4897   BFD_RELOC_RL78_SYM
4898 ENUMX
4899   BFD_RELOC_RL78_OP_SUBTRACT
4900 ENUMX
4901   BFD_RELOC_RL78_OP_NEG
4902 ENUMX
4903   BFD_RELOC_RL78_OP_AND
4904 ENUMX
4905   BFD_RELOC_RL78_OP_SHRA
4906 ENUMX
4907   BFD_RELOC_RL78_ABS8
4908 ENUMX
4909   BFD_RELOC_RL78_ABS16
4910 ENUMX
4911   BFD_RELOC_RL78_ABS16_REV
4912 ENUMX
4913   BFD_RELOC_RL78_ABS32
4914 ENUMX
4915   BFD_RELOC_RL78_ABS32_REV
4916 ENUMX
4917   BFD_RELOC_RL78_ABS16U
4918 ENUMX
4919   BFD_RELOC_RL78_ABS16UW
4920 ENUMX
4921   BFD_RELOC_RL78_ABS16UL
4922 ENUMX
4923   BFD_RELOC_RL78_RELAX
4924 ENUMX
4925   BFD_RELOC_RL78_HI16
4926 ENUMX
4927   BFD_RELOC_RL78_HI8
4928 ENUMX
4929   BFD_RELOC_RL78_LO16
4930 ENUMX
4931   BFD_RELOC_RL78_CODE
4932 ENUMDOC
4933   Renesas RL78 Relocations.
4934
4935 ENUM
4936   BFD_RELOC_RX_NEG8
4937 ENUMX
4938   BFD_RELOC_RX_NEG16
4939 ENUMX
4940   BFD_RELOC_RX_NEG24
4941 ENUMX
4942   BFD_RELOC_RX_NEG32
4943 ENUMX
4944   BFD_RELOC_RX_16_OP
4945 ENUMX
4946   BFD_RELOC_RX_24_OP
4947 ENUMX
4948   BFD_RELOC_RX_32_OP
4949 ENUMX
4950   BFD_RELOC_RX_8U
4951 ENUMX
4952   BFD_RELOC_RX_16U
4953 ENUMX
4954   BFD_RELOC_RX_24U
4955 ENUMX
4956   BFD_RELOC_RX_DIR3U_PCREL
4957 ENUMX
4958   BFD_RELOC_RX_DIFF
4959 ENUMX
4960   BFD_RELOC_RX_GPRELB
4961 ENUMX
4962   BFD_RELOC_RX_GPRELW
4963 ENUMX
4964   BFD_RELOC_RX_GPRELL
4965 ENUMX
4966   BFD_RELOC_RX_SYM
4967 ENUMX
4968   BFD_RELOC_RX_OP_SUBTRACT
4969 ENUMX
4970   BFD_RELOC_RX_OP_NEG
4971 ENUMX
4972   BFD_RELOC_RX_ABS8
4973 ENUMX
4974   BFD_RELOC_RX_ABS16
4975 ENUMX
4976   BFD_RELOC_RX_ABS16_REV
4977 ENUMX
4978   BFD_RELOC_RX_ABS32
4979 ENUMX
4980   BFD_RELOC_RX_ABS32_REV
4981 ENUMX
4982   BFD_RELOC_RX_ABS16U
4983 ENUMX
4984   BFD_RELOC_RX_ABS16UW
4985 ENUMX
4986   BFD_RELOC_RX_ABS16UL
4987 ENUMX
4988   BFD_RELOC_RX_RELAX
4989 ENUMDOC
4990   Renesas RX Relocations.
4991
4992 ENUM
4993   BFD_RELOC_390_12
4994 ENUMDOC
4995    Direct 12 bit.
4996 ENUM
4997   BFD_RELOC_390_GOT12
4998 ENUMDOC
4999   12 bit GOT offset.
5000 ENUM
5001   BFD_RELOC_390_PLT32
5002 ENUMDOC
5003   32 bit PC relative PLT address.
5004 ENUM
5005   BFD_RELOC_390_COPY
5006 ENUMDOC
5007   Copy symbol at runtime.
5008 ENUM
5009   BFD_RELOC_390_GLOB_DAT
5010 ENUMDOC
5011   Create GOT entry.
5012 ENUM
5013   BFD_RELOC_390_JMP_SLOT
5014 ENUMDOC
5015   Create PLT entry.
5016 ENUM
5017   BFD_RELOC_390_RELATIVE
5018 ENUMDOC
5019   Adjust by program base.
5020 ENUM
5021   BFD_RELOC_390_GOTPC
5022 ENUMDOC
5023   32 bit PC relative offset to GOT.
5024 ENUM
5025   BFD_RELOC_390_GOT16
5026 ENUMDOC
5027   16 bit GOT offset.
5028 ENUM
5029   BFD_RELOC_390_PC12DBL
5030 ENUMDOC
5031   PC relative 12 bit shifted by 1.
5032 ENUM
5033   BFD_RELOC_390_PLT12DBL
5034 ENUMDOC
5035   12 bit PC rel. PLT shifted by 1.
5036 ENUM
5037   BFD_RELOC_390_PC16DBL
5038 ENUMDOC
5039   PC relative 16 bit shifted by 1.
5040 ENUM
5041   BFD_RELOC_390_PLT16DBL
5042 ENUMDOC
5043   16 bit PC rel. PLT shifted by 1.
5044 ENUM
5045   BFD_RELOC_390_PC24DBL
5046 ENUMDOC
5047   PC relative 24 bit shifted by 1.
5048 ENUM
5049   BFD_RELOC_390_PLT24DBL
5050 ENUMDOC
5051   24 bit PC rel. PLT shifted by 1.
5052 ENUM
5053   BFD_RELOC_390_PC32DBL
5054 ENUMDOC
5055   PC relative 32 bit shifted by 1.
5056 ENUM
5057   BFD_RELOC_390_PLT32DBL
5058 ENUMDOC
5059   32 bit PC rel. PLT shifted by 1.
5060 ENUM
5061   BFD_RELOC_390_GOTPCDBL
5062 ENUMDOC
5063   32 bit PC rel. GOT shifted by 1.
5064 ENUM
5065   BFD_RELOC_390_GOT64
5066 ENUMDOC
5067   64 bit GOT offset.
5068 ENUM
5069   BFD_RELOC_390_PLT64
5070 ENUMDOC
5071   64 bit PC relative PLT address.
5072 ENUM
5073   BFD_RELOC_390_GOTENT
5074 ENUMDOC
5075   32 bit rel. offset to GOT entry.
5076 ENUM
5077   BFD_RELOC_390_GOTOFF64
5078 ENUMDOC
5079   64 bit offset to GOT.
5080 ENUM
5081   BFD_RELOC_390_GOTPLT12
5082 ENUMDOC
5083   12-bit offset to symbol-entry within GOT, with PLT handling.
5084 ENUM
5085   BFD_RELOC_390_GOTPLT16
5086 ENUMDOC
5087   16-bit offset to symbol-entry within GOT, with PLT handling.
5088 ENUM
5089   BFD_RELOC_390_GOTPLT32
5090 ENUMDOC
5091   32-bit offset to symbol-entry within GOT, with PLT handling.
5092 ENUM
5093   BFD_RELOC_390_GOTPLT64
5094 ENUMDOC
5095   64-bit offset to symbol-entry within GOT, with PLT handling.
5096 ENUM
5097   BFD_RELOC_390_GOTPLTENT
5098 ENUMDOC
5099   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5100 ENUM
5101   BFD_RELOC_390_PLTOFF16
5102 ENUMDOC
5103   16-bit rel. offset from the GOT to a PLT entry.
5104 ENUM
5105   BFD_RELOC_390_PLTOFF32
5106 ENUMDOC
5107   32-bit rel. offset from the GOT to a PLT entry.
5108 ENUM
5109   BFD_RELOC_390_PLTOFF64
5110 ENUMDOC
5111   64-bit rel. offset from the GOT to a PLT entry.
5112
5113 ENUM
5114   BFD_RELOC_390_TLS_LOAD
5115 ENUMX
5116   BFD_RELOC_390_TLS_GDCALL
5117 ENUMX
5118   BFD_RELOC_390_TLS_LDCALL
5119 ENUMX
5120   BFD_RELOC_390_TLS_GD32
5121 ENUMX
5122   BFD_RELOC_390_TLS_GD64
5123 ENUMX
5124   BFD_RELOC_390_TLS_GOTIE12
5125 ENUMX
5126   BFD_RELOC_390_TLS_GOTIE32
5127 ENUMX
5128   BFD_RELOC_390_TLS_GOTIE64
5129 ENUMX
5130   BFD_RELOC_390_TLS_LDM32
5131 ENUMX
5132   BFD_RELOC_390_TLS_LDM64
5133 ENUMX
5134   BFD_RELOC_390_TLS_IE32
5135 ENUMX
5136   BFD_RELOC_390_TLS_IE64
5137 ENUMX
5138   BFD_RELOC_390_TLS_IEENT
5139 ENUMX
5140   BFD_RELOC_390_TLS_LE32
5141 ENUMX
5142   BFD_RELOC_390_TLS_LE64
5143 ENUMX
5144   BFD_RELOC_390_TLS_LDO32
5145 ENUMX
5146   BFD_RELOC_390_TLS_LDO64
5147 ENUMX
5148   BFD_RELOC_390_TLS_DTPMOD
5149 ENUMX
5150   BFD_RELOC_390_TLS_DTPOFF
5151 ENUMX
5152   BFD_RELOC_390_TLS_TPOFF
5153 ENUMDOC
5154   s390 tls relocations.
5155
5156 ENUM
5157   BFD_RELOC_390_20
5158 ENUMX
5159   BFD_RELOC_390_GOT20
5160 ENUMX
5161   BFD_RELOC_390_GOTPLT20
5162 ENUMX
5163   BFD_RELOC_390_TLS_GOTIE20
5164 ENUMDOC
5165   Long displacement extension.
5166
5167 ENUM
5168   BFD_RELOC_390_IRELATIVE
5169 ENUMDOC
5170   STT_GNU_IFUNC relocation.
5171
5172 ENUM
5173   BFD_RELOC_SCORE_GPREL15
5174 ENUMDOC
5175   Score relocations
5176   Low 16 bit for load/store
5177 ENUM
5178   BFD_RELOC_SCORE_DUMMY2
5179 ENUMX
5180   BFD_RELOC_SCORE_JMP
5181 ENUMDOC
5182   This is a 24-bit reloc with the right 1 bit assumed to be 0
5183 ENUM
5184   BFD_RELOC_SCORE_BRANCH
5185 ENUMDOC
5186   This is a 19-bit reloc with the right 1 bit assumed to be 0
5187 ENUM
5188   BFD_RELOC_SCORE_IMM30
5189 ENUMDOC
5190   This is a 32-bit reloc for 48-bit instructions.
5191 ENUM
5192   BFD_RELOC_SCORE_IMM32
5193 ENUMDOC
5194   This is a 32-bit reloc for 48-bit instructions.
5195 ENUM
5196   BFD_RELOC_SCORE16_JMP
5197 ENUMDOC
5198   This is a 11-bit reloc with the right 1 bit assumed to be 0
5199 ENUM
5200   BFD_RELOC_SCORE16_BRANCH
5201 ENUMDOC
5202   This is a 8-bit reloc with the right 1 bit assumed to be 0
5203 ENUM
5204   BFD_RELOC_SCORE_BCMP
5205 ENUMDOC
5206    This is a 9-bit reloc with the right 1 bit assumed to be 0
5207 ENUM
5208   BFD_RELOC_SCORE_GOT15
5209 ENUMX
5210   BFD_RELOC_SCORE_GOT_LO16
5211 ENUMX
5212   BFD_RELOC_SCORE_CALL15
5213 ENUMX
5214   BFD_RELOC_SCORE_DUMMY_HI16
5215 ENUMDOC
5216   Undocumented Score relocs
5217
5218 ENUM
5219   BFD_RELOC_IP2K_FR9
5220 ENUMDOC
5221   Scenix IP2K - 9-bit register number / data address
5222 ENUM
5223   BFD_RELOC_IP2K_BANK
5224 ENUMDOC
5225   Scenix IP2K - 4-bit register/data bank number
5226 ENUM
5227   BFD_RELOC_IP2K_ADDR16CJP
5228 ENUMDOC
5229   Scenix IP2K - low 13 bits of instruction word address
5230 ENUM
5231   BFD_RELOC_IP2K_PAGE3
5232 ENUMDOC
5233   Scenix IP2K - high 3 bits of instruction word address
5234 ENUM
5235   BFD_RELOC_IP2K_LO8DATA
5236 ENUMX
5237   BFD_RELOC_IP2K_HI8DATA
5238 ENUMX
5239   BFD_RELOC_IP2K_EX8DATA
5240 ENUMDOC
5241   Scenix IP2K - ext/low/high 8 bits of data address
5242 ENUM
5243   BFD_RELOC_IP2K_LO8INSN
5244 ENUMX
5245   BFD_RELOC_IP2K_HI8INSN
5246 ENUMDOC
5247   Scenix IP2K - low/high 8 bits of instruction word address
5248 ENUM
5249   BFD_RELOC_IP2K_PC_SKIP
5250 ENUMDOC
5251   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5252 ENUM
5253   BFD_RELOC_IP2K_TEXT
5254 ENUMDOC
5255   Scenix IP2K - 16 bit word address in text section.
5256 ENUM
5257   BFD_RELOC_IP2K_FR_OFFSET
5258 ENUMDOC
5259   Scenix IP2K - 7-bit sp or dp offset
5260 ENUM
5261   BFD_RELOC_VPE4KMATH_DATA
5262 ENUMX
5263   BFD_RELOC_VPE4KMATH_INSN
5264 ENUMDOC
5265   Scenix VPE4K coprocessor - data/insn-space addressing
5266
5267 ENUM
5268   BFD_RELOC_VTABLE_INHERIT
5269 ENUMX
5270   BFD_RELOC_VTABLE_ENTRY
5271 ENUMDOC
5272   These two relocations are used by the linker to determine which of
5273   the entries in a C++ virtual function table are actually used.  When
5274   the --gc-sections option is given, the linker will zero out the entries
5275   that are not used, so that the code for those functions need not be
5276   included in the output.
5277
5278   VTABLE_INHERIT is a zero-space relocation used to describe to the
5279   linker the inheritance tree of a C++ virtual function table.  The
5280   relocation's symbol should be the parent class' vtable, and the
5281   relocation should be located at the child vtable.
5282
5283   VTABLE_ENTRY is a zero-space relocation that describes the use of a
5284   virtual function table entry.  The reloc's symbol should refer to the
5285   table of the class mentioned in the code.  Off of that base, an offset
5286   describes the entry that is being used.  For Rela hosts, this offset
5287   is stored in the reloc's addend.  For Rel hosts, we are forced to put
5288   this offset in the reloc's section offset.
5289
5290 ENUM
5291   BFD_RELOC_IA64_IMM14
5292 ENUMX
5293   BFD_RELOC_IA64_IMM22
5294 ENUMX
5295   BFD_RELOC_IA64_IMM64
5296 ENUMX
5297   BFD_RELOC_IA64_DIR32MSB
5298 ENUMX
5299   BFD_RELOC_IA64_DIR32LSB
5300 ENUMX
5301   BFD_RELOC_IA64_DIR64MSB
5302 ENUMX
5303   BFD_RELOC_IA64_DIR64LSB
5304 ENUMX
5305   BFD_RELOC_IA64_GPREL22
5306 ENUMX
5307   BFD_RELOC_IA64_GPREL64I
5308 ENUMX
5309   BFD_RELOC_IA64_GPREL32MSB
5310 ENUMX
5311   BFD_RELOC_IA64_GPREL32LSB
5312 ENUMX
5313   BFD_RELOC_IA64_GPREL64MSB
5314 ENUMX
5315   BFD_RELOC_IA64_GPREL64LSB
5316 ENUMX
5317   BFD_RELOC_IA64_LTOFF22
5318 ENUMX
5319   BFD_RELOC_IA64_LTOFF64I
5320 ENUMX
5321   BFD_RELOC_IA64_PLTOFF22
5322 ENUMX
5323   BFD_RELOC_IA64_PLTOFF64I
5324 ENUMX
5325   BFD_RELOC_IA64_PLTOFF64MSB
5326 ENUMX
5327   BFD_RELOC_IA64_PLTOFF64LSB
5328 ENUMX
5329   BFD_RELOC_IA64_FPTR64I
5330 ENUMX
5331   BFD_RELOC_IA64_FPTR32MSB
5332 ENUMX
5333   BFD_RELOC_IA64_FPTR32LSB
5334 ENUMX
5335   BFD_RELOC_IA64_FPTR64MSB
5336 ENUMX
5337   BFD_RELOC_IA64_FPTR64LSB
5338 ENUMX
5339   BFD_RELOC_IA64_PCREL21B
5340 ENUMX
5341   BFD_RELOC_IA64_PCREL21BI
5342 ENUMX
5343   BFD_RELOC_IA64_PCREL21M
5344 ENUMX
5345   BFD_RELOC_IA64_PCREL21F
5346 ENUMX
5347   BFD_RELOC_IA64_PCREL22
5348 ENUMX
5349   BFD_RELOC_IA64_PCREL60B
5350 ENUMX
5351   BFD_RELOC_IA64_PCREL64I
5352 ENUMX
5353   BFD_RELOC_IA64_PCREL32MSB
5354 ENUMX
5355   BFD_RELOC_IA64_PCREL32LSB
5356 ENUMX
5357   BFD_RELOC_IA64_PCREL64MSB
5358 ENUMX
5359   BFD_RELOC_IA64_PCREL64LSB
5360 ENUMX
5361   BFD_RELOC_IA64_LTOFF_FPTR22
5362 ENUMX
5363   BFD_RELOC_IA64_LTOFF_FPTR64I
5364 ENUMX
5365   BFD_RELOC_IA64_LTOFF_FPTR32MSB
5366 ENUMX
5367   BFD_RELOC_IA64_LTOFF_FPTR32LSB
5368 ENUMX
5369   BFD_RELOC_IA64_LTOFF_FPTR64MSB
5370 ENUMX
5371   BFD_RELOC_IA64_LTOFF_FPTR64LSB
5372 ENUMX
5373   BFD_RELOC_IA64_SEGREL32MSB
5374 ENUMX
5375   BFD_RELOC_IA64_SEGREL32LSB
5376 ENUMX
5377   BFD_RELOC_IA64_SEGREL64MSB
5378 ENUMX
5379   BFD_RELOC_IA64_SEGREL64LSB
5380 ENUMX
5381   BFD_RELOC_IA64_SECREL32MSB
5382 ENUMX
5383   BFD_RELOC_IA64_SECREL32LSB
5384 ENUMX
5385   BFD_RELOC_IA64_SECREL64MSB
5386 ENUMX
5387   BFD_RELOC_IA64_SECREL64LSB
5388 ENUMX
5389   BFD_RELOC_IA64_REL32MSB
5390 ENUMX
5391   BFD_RELOC_IA64_REL32LSB
5392 ENUMX
5393   BFD_RELOC_IA64_REL64MSB
5394 ENUMX
5395   BFD_RELOC_IA64_REL64LSB
5396 ENUMX
5397   BFD_RELOC_IA64_LTV32MSB
5398 ENUMX
5399   BFD_RELOC_IA64_LTV32LSB
5400 ENUMX
5401   BFD_RELOC_IA64_LTV64MSB
5402 ENUMX
5403   BFD_RELOC_IA64_LTV64LSB
5404 ENUMX
5405   BFD_RELOC_IA64_IPLTMSB
5406 ENUMX
5407   BFD_RELOC_IA64_IPLTLSB
5408 ENUMX
5409   BFD_RELOC_IA64_COPY
5410 ENUMX
5411   BFD_RELOC_IA64_LTOFF22X
5412 ENUMX
5413   BFD_RELOC_IA64_LDXMOV
5414 ENUMX
5415   BFD_RELOC_IA64_TPREL14
5416 ENUMX
5417   BFD_RELOC_IA64_TPREL22
5418 ENUMX
5419   BFD_RELOC_IA64_TPREL64I
5420 ENUMX
5421   BFD_RELOC_IA64_TPREL64MSB
5422 ENUMX
5423   BFD_RELOC_IA64_TPREL64LSB
5424 ENUMX
5425   BFD_RELOC_IA64_LTOFF_TPREL22
5426 ENUMX
5427   BFD_RELOC_IA64_DTPMOD64MSB
5428 ENUMX
5429   BFD_RELOC_IA64_DTPMOD64LSB
5430 ENUMX
5431   BFD_RELOC_IA64_LTOFF_DTPMOD22
5432 ENUMX
5433   BFD_RELOC_IA64_DTPREL14
5434 ENUMX
5435   BFD_RELOC_IA64_DTPREL22
5436 ENUMX
5437   BFD_RELOC_IA64_DTPREL64I
5438 ENUMX
5439   BFD_RELOC_IA64_DTPREL32MSB
5440 ENUMX
5441   BFD_RELOC_IA64_DTPREL32LSB
5442 ENUMX
5443   BFD_RELOC_IA64_DTPREL64MSB
5444 ENUMX
5445   BFD_RELOC_IA64_DTPREL64LSB
5446 ENUMX
5447   BFD_RELOC_IA64_LTOFF_DTPREL22
5448 ENUMDOC
5449   Intel IA64 Relocations.
5450
5451 ENUM
5452   BFD_RELOC_M68HC11_HI8
5453 ENUMDOC
5454   Motorola 68HC11 reloc.
5455   This is the 8 bit high part of an absolute address.
5456 ENUM
5457   BFD_RELOC_M68HC11_LO8
5458 ENUMDOC
5459   Motorola 68HC11 reloc.
5460   This is the 8 bit low part of an absolute address.
5461 ENUM
5462   BFD_RELOC_M68HC11_3B
5463 ENUMDOC
5464   Motorola 68HC11 reloc.
5465   This is the 3 bit of a value.
5466 ENUM
5467   BFD_RELOC_M68HC11_RL_JUMP
5468 ENUMDOC
5469   Motorola 68HC11 reloc.
5470   This reloc marks the beginning of a jump/call instruction.
5471   It is used for linker relaxation to correctly identify beginning
5472   of instruction and change some branches to use PC-relative
5473   addressing mode.
5474 ENUM
5475   BFD_RELOC_M68HC11_RL_GROUP
5476 ENUMDOC
5477   Motorola 68HC11 reloc.
5478   This reloc marks a group of several instructions that gcc generates
5479   and for which the linker relaxation pass can modify and/or remove
5480   some of them.
5481 ENUM
5482   BFD_RELOC_M68HC11_LO16
5483 ENUMDOC
5484   Motorola 68HC11 reloc.
5485   This is the 16-bit lower part of an address.  It is used for 'call'
5486   instruction to specify the symbol address without any special
5487   transformation (due to memory bank window).
5488 ENUM
5489   BFD_RELOC_M68HC11_PAGE
5490 ENUMDOC
5491   Motorola 68HC11 reloc.
5492   This is a 8-bit reloc that specifies the page number of an address.
5493   It is used by 'call' instruction to specify the page number of
5494   the symbol.
5495 ENUM
5496   BFD_RELOC_M68HC11_24
5497 ENUMDOC
5498   Motorola 68HC11 reloc.
5499   This is a 24-bit reloc that represents the address with a 16-bit
5500   value and a 8-bit page number.  The symbol address is transformed
5501   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5502 ENUM
5503   BFD_RELOC_M68HC12_5B
5504 ENUMDOC
5505   Motorola 68HC12 reloc.
5506   This is the 5 bits of a value.
5507 ENUM
5508   BFD_RELOC_XGATE_RL_JUMP
5509 ENUMDOC
5510   Freescale XGATE reloc.
5511   This reloc marks the beginning of a bra/jal instruction.
5512 ENUM
5513   BFD_RELOC_XGATE_RL_GROUP
5514 ENUMDOC
5515   Freescale XGATE reloc.
5516   This reloc marks a group of several instructions that gcc generates
5517   and for which the linker relaxation pass can modify and/or remove
5518   some of them.
5519 ENUM
5520   BFD_RELOC_XGATE_LO16
5521 ENUMDOC
5522   Freescale XGATE reloc.
5523   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5524   instructions.
5525 ENUM
5526   BFD_RELOC_XGATE_GPAGE
5527 ENUMDOC
5528   Freescale XGATE reloc.
5529 ENUM
5530   BFD_RELOC_XGATE_24
5531 ENUMDOC
5532   Freescale XGATE reloc.
5533 ENUM
5534   BFD_RELOC_XGATE_PCREL_9
5535 ENUMDOC
5536   Freescale XGATE reloc.
5537   This is a 9-bit pc-relative reloc.
5538 ENUM
5539   BFD_RELOC_XGATE_PCREL_10
5540 ENUMDOC
5541   Freescale XGATE reloc.
5542   This is a 10-bit pc-relative reloc.
5543 ENUM
5544   BFD_RELOC_XGATE_IMM8_LO
5545 ENUMDOC
5546   Freescale XGATE reloc.
5547   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5548   instructions.
5549 ENUM
5550   BFD_RELOC_XGATE_IMM8_HI
5551 ENUMDOC
5552   Freescale XGATE reloc.
5553   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5554   instructions.
5555 ENUM
5556   BFD_RELOC_XGATE_IMM3
5557 ENUMDOC
5558   Freescale XGATE reloc.
5559   This is a 3-bit pc-relative reloc.
5560 ENUM
5561   BFD_RELOC_XGATE_IMM4
5562 ENUMDOC
5563   Freescale XGATE reloc.
5564   This is a 4-bit pc-relative reloc.
5565 ENUM
5566   BFD_RELOC_XGATE_IMM5
5567 ENUMDOC
5568   Freescale XGATE reloc.
5569   This is a 5-bit pc-relative reloc.
5570 ENUM
5571   BFD_RELOC_M68HC12_9B
5572 ENUMDOC
5573   Motorola 68HC12 reloc.
5574   This is the 9 bits of a value.
5575 ENUM
5576   BFD_RELOC_M68HC12_16B
5577 ENUMDOC
5578   Motorola 68HC12 reloc.
5579   This is the 16 bits of a value.
5580 ENUM
5581   BFD_RELOC_M68HC12_9_PCREL
5582 ENUMDOC
5583   Motorola 68HC12/XGATE reloc.
5584   This is a PCREL9 branch.
5585 ENUM
5586   BFD_RELOC_M68HC12_10_PCREL
5587 ENUMDOC
5588   Motorola 68HC12/XGATE reloc.
5589   This is a PCREL10 branch.
5590 ENUM
5591   BFD_RELOC_M68HC12_LO8XG
5592 ENUMDOC
5593   Motorola 68HC12/XGATE reloc.
5594   This is the 8 bit low part of an absolute address and immediately precedes
5595   a matching HI8XG part.
5596 ENUM
5597   BFD_RELOC_M68HC12_HI8XG
5598 ENUMDOC
5599   Motorola 68HC12/XGATE reloc.
5600   This is the 8 bit high part of an absolute address and immediately follows
5601   a matching LO8XG part.
5602 ENUM
5603   BFD_RELOC_16C_NUM08
5604 ENUMX
5605   BFD_RELOC_16C_NUM08_C
5606 ENUMX
5607   BFD_RELOC_16C_NUM16
5608 ENUMX
5609   BFD_RELOC_16C_NUM16_C
5610 ENUMX
5611   BFD_RELOC_16C_NUM32
5612 ENUMX
5613   BFD_RELOC_16C_NUM32_C
5614 ENUMX
5615   BFD_RELOC_16C_DISP04
5616 ENUMX
5617   BFD_RELOC_16C_DISP04_C
5618 ENUMX
5619   BFD_RELOC_16C_DISP08
5620 ENUMX
5621   BFD_RELOC_16C_DISP08_C
5622 ENUMX
5623   BFD_RELOC_16C_DISP16
5624 ENUMX
5625   BFD_RELOC_16C_DISP16_C
5626 ENUMX
5627   BFD_RELOC_16C_DISP24
5628 ENUMX
5629   BFD_RELOC_16C_DISP24_C
5630 ENUMX
5631   BFD_RELOC_16C_DISP24a
5632 ENUMX
5633   BFD_RELOC_16C_DISP24a_C
5634 ENUMX
5635   BFD_RELOC_16C_REG04
5636 ENUMX
5637   BFD_RELOC_16C_REG04_C
5638 ENUMX
5639   BFD_RELOC_16C_REG04a
5640 ENUMX
5641   BFD_RELOC_16C_REG04a_C
5642 ENUMX
5643   BFD_RELOC_16C_REG14
5644 ENUMX
5645   BFD_RELOC_16C_REG14_C
5646 ENUMX
5647   BFD_RELOC_16C_REG16
5648 ENUMX
5649   BFD_RELOC_16C_REG16_C
5650 ENUMX
5651   BFD_RELOC_16C_REG20
5652 ENUMX
5653   BFD_RELOC_16C_REG20_C
5654 ENUMX
5655   BFD_RELOC_16C_ABS20
5656 ENUMX
5657   BFD_RELOC_16C_ABS20_C
5658 ENUMX
5659   BFD_RELOC_16C_ABS24
5660 ENUMX
5661   BFD_RELOC_16C_ABS24_C
5662 ENUMX
5663   BFD_RELOC_16C_IMM04
5664 ENUMX
5665   BFD_RELOC_16C_IMM04_C
5666 ENUMX
5667   BFD_RELOC_16C_IMM16
5668 ENUMX
5669   BFD_RELOC_16C_IMM16_C
5670 ENUMX
5671   BFD_RELOC_16C_IMM20
5672 ENUMX
5673   BFD_RELOC_16C_IMM20_C
5674 ENUMX
5675   BFD_RELOC_16C_IMM24
5676 ENUMX
5677   BFD_RELOC_16C_IMM24_C
5678 ENUMX
5679   BFD_RELOC_16C_IMM32
5680 ENUMX
5681   BFD_RELOC_16C_IMM32_C
5682 ENUMDOC
5683   NS CR16C Relocations.
5684
5685 ENUM
5686   BFD_RELOC_CR16_NUM8
5687 ENUMX
5688   BFD_RELOC_CR16_NUM16
5689 ENUMX
5690   BFD_RELOC_CR16_NUM32
5691 ENUMX
5692   BFD_RELOC_CR16_NUM32a
5693 ENUMX
5694   BFD_RELOC_CR16_REGREL0
5695 ENUMX
5696   BFD_RELOC_CR16_REGREL4
5697 ENUMX
5698   BFD_RELOC_CR16_REGREL4a
5699 ENUMX
5700   BFD_RELOC_CR16_REGREL14
5701 ENUMX
5702   BFD_RELOC_CR16_REGREL14a
5703 ENUMX
5704   BFD_RELOC_CR16_REGREL16
5705 ENUMX
5706   BFD_RELOC_CR16_REGREL20
5707 ENUMX
5708   BFD_RELOC_CR16_REGREL20a
5709 ENUMX
5710   BFD_RELOC_CR16_ABS20
5711 ENUMX
5712   BFD_RELOC_CR16_ABS24
5713 ENUMX
5714   BFD_RELOC_CR16_IMM4
5715 ENUMX
5716   BFD_RELOC_CR16_IMM8
5717 ENUMX
5718   BFD_RELOC_CR16_IMM16
5719 ENUMX
5720   BFD_RELOC_CR16_IMM20
5721 ENUMX
5722   BFD_RELOC_CR16_IMM24
5723 ENUMX
5724   BFD_RELOC_CR16_IMM32
5725 ENUMX
5726   BFD_RELOC_CR16_IMM32a
5727 ENUMX
5728   BFD_RELOC_CR16_DISP4
5729 ENUMX
5730   BFD_RELOC_CR16_DISP8
5731 ENUMX
5732   BFD_RELOC_CR16_DISP16
5733 ENUMX
5734   BFD_RELOC_CR16_DISP20
5735 ENUMX
5736   BFD_RELOC_CR16_DISP24
5737 ENUMX
5738   BFD_RELOC_CR16_DISP24a
5739 ENUMX
5740   BFD_RELOC_CR16_SWITCH8
5741 ENUMX
5742   BFD_RELOC_CR16_SWITCH16
5743 ENUMX
5744   BFD_RELOC_CR16_SWITCH32
5745 ENUMX
5746   BFD_RELOC_CR16_GOT_REGREL20
5747 ENUMX
5748   BFD_RELOC_CR16_GOTC_REGREL20
5749 ENUMX
5750   BFD_RELOC_CR16_GLOB_DAT
5751 ENUMDOC
5752   NS CR16 Relocations.
5753
5754 ENUM
5755   BFD_RELOC_CRX_REL4
5756 ENUMX
5757   BFD_RELOC_CRX_REL8
5758 ENUMX
5759   BFD_RELOC_CRX_REL8_CMP
5760 ENUMX
5761   BFD_RELOC_CRX_REL16
5762 ENUMX
5763   BFD_RELOC_CRX_REL24
5764 ENUMX
5765   BFD_RELOC_CRX_REL32
5766 ENUMX
5767   BFD_RELOC_CRX_REGREL12
5768 ENUMX
5769   BFD_RELOC_CRX_REGREL22
5770 ENUMX
5771   BFD_RELOC_CRX_REGREL28
5772 ENUMX
5773   BFD_RELOC_CRX_REGREL32
5774 ENUMX
5775   BFD_RELOC_CRX_ABS16
5776 ENUMX
5777   BFD_RELOC_CRX_ABS32
5778 ENUMX
5779   BFD_RELOC_CRX_NUM8
5780 ENUMX
5781   BFD_RELOC_CRX_NUM16
5782 ENUMX
5783   BFD_RELOC_CRX_NUM32
5784 ENUMX
5785   BFD_RELOC_CRX_IMM16
5786 ENUMX
5787   BFD_RELOC_CRX_IMM32
5788 ENUMX
5789   BFD_RELOC_CRX_SWITCH8
5790 ENUMX
5791   BFD_RELOC_CRX_SWITCH16
5792 ENUMX
5793   BFD_RELOC_CRX_SWITCH32
5794 ENUMDOC
5795   NS CRX Relocations.
5796
5797 ENUM
5798   BFD_RELOC_CRIS_BDISP8
5799 ENUMX
5800   BFD_RELOC_CRIS_UNSIGNED_5
5801 ENUMX
5802   BFD_RELOC_CRIS_SIGNED_6
5803 ENUMX
5804   BFD_RELOC_CRIS_UNSIGNED_6
5805 ENUMX
5806   BFD_RELOC_CRIS_SIGNED_8
5807 ENUMX
5808   BFD_RELOC_CRIS_UNSIGNED_8
5809 ENUMX
5810   BFD_RELOC_CRIS_SIGNED_16
5811 ENUMX
5812   BFD_RELOC_CRIS_UNSIGNED_16
5813 ENUMX
5814   BFD_RELOC_CRIS_LAPCQ_OFFSET
5815 ENUMX
5816   BFD_RELOC_CRIS_UNSIGNED_4
5817 ENUMDOC
5818   These relocs are only used within the CRIS assembler.  They are not
5819   (at present) written to any object files.
5820 ENUM
5821   BFD_RELOC_CRIS_COPY
5822 ENUMX
5823   BFD_RELOC_CRIS_GLOB_DAT
5824 ENUMX
5825   BFD_RELOC_CRIS_JUMP_SLOT
5826 ENUMX
5827   BFD_RELOC_CRIS_RELATIVE
5828 ENUMDOC
5829   Relocs used in ELF shared libraries for CRIS.
5830 ENUM
5831   BFD_RELOC_CRIS_32_GOT
5832 ENUMDOC
5833   32-bit offset to symbol-entry within GOT.
5834 ENUM
5835   BFD_RELOC_CRIS_16_GOT
5836 ENUMDOC
5837   16-bit offset to symbol-entry within GOT.
5838 ENUM
5839   BFD_RELOC_CRIS_32_GOTPLT
5840 ENUMDOC
5841   32-bit offset to symbol-entry within GOT, with PLT handling.
5842 ENUM
5843   BFD_RELOC_CRIS_16_GOTPLT
5844 ENUMDOC
5845   16-bit offset to symbol-entry within GOT, with PLT handling.
5846 ENUM
5847   BFD_RELOC_CRIS_32_GOTREL
5848 ENUMDOC
5849   32-bit offset to symbol, relative to GOT.
5850 ENUM
5851   BFD_RELOC_CRIS_32_PLT_GOTREL
5852 ENUMDOC
5853   32-bit offset to symbol with PLT entry, relative to GOT.
5854 ENUM
5855   BFD_RELOC_CRIS_32_PLT_PCREL
5856 ENUMDOC
5857   32-bit offset to symbol with PLT entry, relative to this relocation.
5858
5859 ENUM
5860   BFD_RELOC_CRIS_32_GOT_GD
5861 ENUMX
5862   BFD_RELOC_CRIS_16_GOT_GD
5863 ENUMX
5864   BFD_RELOC_CRIS_32_GD
5865 ENUMX
5866   BFD_RELOC_CRIS_DTP
5867 ENUMX
5868   BFD_RELOC_CRIS_32_DTPREL
5869 ENUMX
5870   BFD_RELOC_CRIS_16_DTPREL
5871 ENUMX
5872   BFD_RELOC_CRIS_32_GOT_TPREL
5873 ENUMX
5874   BFD_RELOC_CRIS_16_GOT_TPREL
5875 ENUMX
5876   BFD_RELOC_CRIS_32_TPREL
5877 ENUMX
5878   BFD_RELOC_CRIS_16_TPREL
5879 ENUMX
5880   BFD_RELOC_CRIS_DTPMOD
5881 ENUMX
5882   BFD_RELOC_CRIS_32_IE
5883 ENUMDOC
5884   Relocs used in TLS code for CRIS.
5885
5886 ENUM
5887   BFD_RELOC_860_COPY
5888 ENUMX
5889   BFD_RELOC_860_GLOB_DAT
5890 ENUMX
5891   BFD_RELOC_860_JUMP_SLOT
5892 ENUMX
5893   BFD_RELOC_860_RELATIVE
5894 ENUMX
5895   BFD_RELOC_860_PC26
5896 ENUMX
5897   BFD_RELOC_860_PLT26
5898 ENUMX
5899   BFD_RELOC_860_PC16
5900 ENUMX
5901   BFD_RELOC_860_LOW0
5902 ENUMX
5903   BFD_RELOC_860_SPLIT0
5904 ENUMX
5905   BFD_RELOC_860_LOW1
5906 ENUMX
5907   BFD_RELOC_860_SPLIT1
5908 ENUMX
5909   BFD_RELOC_860_LOW2
5910 ENUMX
5911   BFD_RELOC_860_SPLIT2
5912 ENUMX
5913   BFD_RELOC_860_LOW3
5914 ENUMX
5915   BFD_RELOC_860_LOGOT0
5916 ENUMX
5917   BFD_RELOC_860_SPGOT0
5918 ENUMX
5919   BFD_RELOC_860_LOGOT1
5920 ENUMX
5921   BFD_RELOC_860_SPGOT1
5922 ENUMX
5923   BFD_RELOC_860_LOGOTOFF0
5924 ENUMX
5925   BFD_RELOC_860_SPGOTOFF0
5926 ENUMX
5927   BFD_RELOC_860_LOGOTOFF1
5928 ENUMX
5929   BFD_RELOC_860_SPGOTOFF1
5930 ENUMX
5931   BFD_RELOC_860_LOGOTOFF2
5932 ENUMX
5933   BFD_RELOC_860_LOGOTOFF3
5934 ENUMX
5935   BFD_RELOC_860_LOPC
5936 ENUMX
5937   BFD_RELOC_860_HIGHADJ
5938 ENUMX
5939   BFD_RELOC_860_HAGOT
5940 ENUMX
5941   BFD_RELOC_860_HAGOTOFF
5942 ENUMX
5943   BFD_RELOC_860_HAPC
5944 ENUMX
5945   BFD_RELOC_860_HIGH
5946 ENUMX
5947   BFD_RELOC_860_HIGOT
5948 ENUMX
5949   BFD_RELOC_860_HIGOTOFF
5950 ENUMDOC
5951   Intel i860 Relocations.
5952
5953 ENUM
5954   BFD_RELOC_OR1K_REL_26
5955 ENUMX
5956   BFD_RELOC_OR1K_GOTPC_HI16
5957 ENUMX
5958   BFD_RELOC_OR1K_GOTPC_LO16
5959 ENUMX
5960   BFD_RELOC_OR1K_GOT16
5961 ENUMX
5962   BFD_RELOC_OR1K_PLT26
5963 ENUMX
5964   BFD_RELOC_OR1K_GOTOFF_HI16
5965 ENUMX
5966   BFD_RELOC_OR1K_GOTOFF_LO16
5967 ENUMX
5968   BFD_RELOC_OR1K_COPY
5969 ENUMX
5970   BFD_RELOC_OR1K_GLOB_DAT
5971 ENUMX
5972   BFD_RELOC_OR1K_JMP_SLOT
5973 ENUMX
5974   BFD_RELOC_OR1K_RELATIVE
5975 ENUMX
5976   BFD_RELOC_OR1K_TLS_GD_HI16
5977 ENUMX
5978   BFD_RELOC_OR1K_TLS_GD_LO16
5979 ENUMX
5980   BFD_RELOC_OR1K_TLS_LDM_HI16
5981 ENUMX
5982   BFD_RELOC_OR1K_TLS_LDM_LO16
5983 ENUMX
5984   BFD_RELOC_OR1K_TLS_LDO_HI16
5985 ENUMX
5986   BFD_RELOC_OR1K_TLS_LDO_LO16
5987 ENUMX
5988   BFD_RELOC_OR1K_TLS_IE_HI16
5989 ENUMX
5990   BFD_RELOC_OR1K_TLS_IE_LO16
5991 ENUMX
5992   BFD_RELOC_OR1K_TLS_LE_HI16
5993 ENUMX
5994   BFD_RELOC_OR1K_TLS_LE_LO16
5995 ENUMX
5996   BFD_RELOC_OR1K_TLS_TPOFF
5997 ENUMX
5998   BFD_RELOC_OR1K_TLS_DTPOFF
5999 ENUMX
6000   BFD_RELOC_OR1K_TLS_DTPMOD
6001 ENUMDOC
6002   OpenRISC 1000 Relocations.
6003
6004 ENUM
6005   BFD_RELOC_H8_DIR16A8
6006 ENUMX
6007   BFD_RELOC_H8_DIR16R8
6008 ENUMX
6009   BFD_RELOC_H8_DIR24A8
6010 ENUMX
6011   BFD_RELOC_H8_DIR24R8
6012 ENUMX
6013   BFD_RELOC_H8_DIR32A16
6014 ENUMX
6015   BFD_RELOC_H8_DISP32A16
6016 ENUMDOC
6017   H8 elf Relocations.
6018
6019 ENUM
6020   BFD_RELOC_XSTORMY16_REL_12
6021 ENUMX
6022   BFD_RELOC_XSTORMY16_12
6023 ENUMX
6024   BFD_RELOC_XSTORMY16_24
6025 ENUMX
6026   BFD_RELOC_XSTORMY16_FPTR16
6027 ENUMDOC
6028   Sony Xstormy16 Relocations.
6029
6030 ENUM
6031   BFD_RELOC_RELC
6032 ENUMDOC
6033   Self-describing complex relocations.
6034 COMMENT
6035
6036 ENUM
6037   BFD_RELOC_XC16X_PAG
6038 ENUMX
6039   BFD_RELOC_XC16X_POF
6040 ENUMX
6041   BFD_RELOC_XC16X_SEG
6042 ENUMX
6043   BFD_RELOC_XC16X_SOF
6044 ENUMDOC
6045   Infineon Relocations.
6046
6047 ENUM
6048   BFD_RELOC_VAX_GLOB_DAT
6049 ENUMX
6050   BFD_RELOC_VAX_JMP_SLOT
6051 ENUMX
6052   BFD_RELOC_VAX_RELATIVE
6053 ENUMDOC
6054   Relocations used by VAX ELF.
6055
6056 ENUM
6057   BFD_RELOC_MT_PC16
6058 ENUMDOC
6059   Morpho MT - 16 bit immediate relocation.
6060 ENUM
6061   BFD_RELOC_MT_HI16
6062 ENUMDOC
6063   Morpho MT - Hi 16 bits of an address.
6064 ENUM
6065   BFD_RELOC_MT_LO16
6066 ENUMDOC
6067   Morpho MT - Low 16 bits of an address.
6068 ENUM
6069   BFD_RELOC_MT_GNU_VTINHERIT
6070 ENUMDOC
6071   Morpho MT - Used to tell the linker which vtable entries are used.
6072 ENUM
6073   BFD_RELOC_MT_GNU_VTENTRY
6074 ENUMDOC
6075   Morpho MT - Used to tell the linker which vtable entries are used.
6076 ENUM
6077   BFD_RELOC_MT_PCINSN8
6078 ENUMDOC
6079   Morpho MT - 8 bit immediate relocation.
6080
6081 ENUM
6082   BFD_RELOC_MSP430_10_PCREL
6083 ENUMX
6084   BFD_RELOC_MSP430_16_PCREL
6085 ENUMX
6086   BFD_RELOC_MSP430_16
6087 ENUMX
6088   BFD_RELOC_MSP430_16_PCREL_BYTE
6089 ENUMX
6090   BFD_RELOC_MSP430_16_BYTE
6091 ENUMX
6092   BFD_RELOC_MSP430_2X_PCREL
6093 ENUMX
6094   BFD_RELOC_MSP430_RL_PCREL
6095 ENUMX
6096   BFD_RELOC_MSP430_ABS8
6097 ENUMX
6098   BFD_RELOC_MSP430X_PCR20_EXT_SRC
6099 ENUMX
6100   BFD_RELOC_MSP430X_PCR20_EXT_DST
6101 ENUMX
6102   BFD_RELOC_MSP430X_PCR20_EXT_ODST
6103 ENUMX
6104   BFD_RELOC_MSP430X_ABS20_EXT_SRC
6105 ENUMX
6106   BFD_RELOC_MSP430X_ABS20_EXT_DST
6107 ENUMX
6108   BFD_RELOC_MSP430X_ABS20_EXT_ODST
6109 ENUMX
6110   BFD_RELOC_MSP430X_ABS20_ADR_SRC
6111 ENUMX
6112   BFD_RELOC_MSP430X_ABS20_ADR_DST
6113 ENUMX
6114   BFD_RELOC_MSP430X_PCR16
6115 ENUMX
6116   BFD_RELOC_MSP430X_PCR20_CALL
6117 ENUMX
6118   BFD_RELOC_MSP430X_ABS16
6119 ENUMX
6120   BFD_RELOC_MSP430_ABS_HI16
6121 ENUMX
6122   BFD_RELOC_MSP430_PREL31
6123 ENUMX
6124   BFD_RELOC_MSP430_SYM_DIFF
6125 ENUMDOC
6126   msp430 specific relocation codes
6127
6128 ENUM
6129   BFD_RELOC_NIOS2_S16
6130 ENUMX
6131   BFD_RELOC_NIOS2_U16
6132 ENUMX
6133   BFD_RELOC_NIOS2_CALL26
6134 ENUMX
6135   BFD_RELOC_NIOS2_IMM5
6136 ENUMX
6137   BFD_RELOC_NIOS2_CACHE_OPX
6138 ENUMX
6139   BFD_RELOC_NIOS2_IMM6
6140 ENUMX
6141   BFD_RELOC_NIOS2_IMM8
6142 ENUMX
6143   BFD_RELOC_NIOS2_HI16
6144 ENUMX
6145   BFD_RELOC_NIOS2_LO16
6146 ENUMX
6147   BFD_RELOC_NIOS2_HIADJ16
6148 ENUMX
6149   BFD_RELOC_NIOS2_GPREL
6150 ENUMX
6151   BFD_RELOC_NIOS2_UJMP
6152 ENUMX
6153   BFD_RELOC_NIOS2_CJMP
6154 ENUMX
6155   BFD_RELOC_NIOS2_CALLR
6156 ENUMX
6157   BFD_RELOC_NIOS2_ALIGN
6158 ENUMX
6159   BFD_RELOC_NIOS2_GOT16
6160 ENUMX
6161   BFD_RELOC_NIOS2_CALL16
6162 ENUMX
6163   BFD_RELOC_NIOS2_GOTOFF_LO
6164 ENUMX
6165   BFD_RELOC_NIOS2_GOTOFF_HA
6166 ENUMX
6167   BFD_RELOC_NIOS2_PCREL_LO
6168 ENUMX
6169   BFD_RELOC_NIOS2_PCREL_HA
6170 ENUMX
6171   BFD_RELOC_NIOS2_TLS_GD16
6172 ENUMX
6173   BFD_RELOC_NIOS2_TLS_LDM16
6174 ENUMX
6175   BFD_RELOC_NIOS2_TLS_LDO16
6176 ENUMX
6177   BFD_RELOC_NIOS2_TLS_IE16
6178 ENUMX
6179   BFD_RELOC_NIOS2_TLS_LE16
6180 ENUMX
6181   BFD_RELOC_NIOS2_TLS_DTPMOD
6182 ENUMX
6183   BFD_RELOC_NIOS2_TLS_DTPREL
6184 ENUMX
6185   BFD_RELOC_NIOS2_TLS_TPREL
6186 ENUMX
6187   BFD_RELOC_NIOS2_COPY
6188 ENUMX
6189   BFD_RELOC_NIOS2_GLOB_DAT
6190 ENUMX
6191   BFD_RELOC_NIOS2_JUMP_SLOT
6192 ENUMX
6193   BFD_RELOC_NIOS2_RELATIVE
6194 ENUMX
6195   BFD_RELOC_NIOS2_GOTOFF
6196 ENUMX
6197   BFD_RELOC_NIOS2_CALL26_NOAT
6198 ENUMX
6199   BFD_RELOC_NIOS2_GOT_LO
6200 ENUMX
6201   BFD_RELOC_NIOS2_GOT_HA
6202 ENUMX
6203   BFD_RELOC_NIOS2_CALL_LO
6204 ENUMX
6205   BFD_RELOC_NIOS2_CALL_HA
6206 ENUMDOC
6207   Relocations used by the Altera Nios II core.
6208
6209 ENUM
6210   BFD_RELOC_IQ2000_OFFSET_16
6211 ENUMX
6212   BFD_RELOC_IQ2000_OFFSET_21
6213 ENUMX
6214   BFD_RELOC_IQ2000_UHI16
6215 ENUMDOC
6216   IQ2000 Relocations.
6217
6218 ENUM
6219   BFD_RELOC_XTENSA_RTLD
6220 ENUMDOC
6221   Special Xtensa relocation used only by PLT entries in ELF shared
6222   objects to indicate that the runtime linker should set the value
6223   to one of its own internal functions or data structures.
6224 ENUM
6225   BFD_RELOC_XTENSA_GLOB_DAT
6226 ENUMX
6227   BFD_RELOC_XTENSA_JMP_SLOT
6228 ENUMX
6229   BFD_RELOC_XTENSA_RELATIVE
6230 ENUMDOC
6231   Xtensa relocations for ELF shared objects.
6232 ENUM
6233   BFD_RELOC_XTENSA_PLT
6234 ENUMDOC
6235   Xtensa relocation used in ELF object files for symbols that may require
6236   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
6237 ENUM
6238   BFD_RELOC_XTENSA_DIFF8
6239 ENUMX
6240   BFD_RELOC_XTENSA_DIFF16
6241 ENUMX
6242   BFD_RELOC_XTENSA_DIFF32
6243 ENUMDOC
6244   Xtensa relocations to mark the difference of two local symbols.
6245   These are only needed to support linker relaxation and can be ignored
6246   when not relaxing.  The field is set to the value of the difference
6247   assuming no relaxation.  The relocation encodes the position of the
6248   first symbol so the linker can determine whether to adjust the field
6249   value.
6250 ENUM
6251   BFD_RELOC_XTENSA_SLOT0_OP
6252 ENUMX
6253   BFD_RELOC_XTENSA_SLOT1_OP
6254 ENUMX
6255   BFD_RELOC_XTENSA_SLOT2_OP
6256 ENUMX
6257   BFD_RELOC_XTENSA_SLOT3_OP
6258 ENUMX
6259   BFD_RELOC_XTENSA_SLOT4_OP
6260 ENUMX
6261   BFD_RELOC_XTENSA_SLOT5_OP
6262 ENUMX
6263   BFD_RELOC_XTENSA_SLOT6_OP
6264 ENUMX
6265   BFD_RELOC_XTENSA_SLOT7_OP
6266 ENUMX
6267   BFD_RELOC_XTENSA_SLOT8_OP
6268 ENUMX
6269   BFD_RELOC_XTENSA_SLOT9_OP
6270 ENUMX
6271   BFD_RELOC_XTENSA_SLOT10_OP
6272 ENUMX
6273   BFD_RELOC_XTENSA_SLOT11_OP
6274 ENUMX
6275   BFD_RELOC_XTENSA_SLOT12_OP
6276 ENUMX
6277   BFD_RELOC_XTENSA_SLOT13_OP
6278 ENUMX
6279   BFD_RELOC_XTENSA_SLOT14_OP
6280 ENUMDOC
6281   Generic Xtensa relocations for instruction operands.  Only the slot
6282   number is encoded in the relocation.  The relocation applies to the
6283   last PC-relative immediate operand, or if there are no PC-relative
6284   immediates, to the last immediate operand.
6285 ENUM
6286   BFD_RELOC_XTENSA_SLOT0_ALT
6287 ENUMX
6288   BFD_RELOC_XTENSA_SLOT1_ALT
6289 ENUMX
6290   BFD_RELOC_XTENSA_SLOT2_ALT
6291 ENUMX
6292   BFD_RELOC_XTENSA_SLOT3_ALT
6293 ENUMX
6294   BFD_RELOC_XTENSA_SLOT4_ALT
6295 ENUMX
6296   BFD_RELOC_XTENSA_SLOT5_ALT
6297 ENUMX
6298   BFD_RELOC_XTENSA_SLOT6_ALT
6299 ENUMX
6300   BFD_RELOC_XTENSA_SLOT7_ALT
6301 ENUMX
6302   BFD_RELOC_XTENSA_SLOT8_ALT
6303 ENUMX
6304   BFD_RELOC_XTENSA_SLOT9_ALT
6305 ENUMX
6306   BFD_RELOC_XTENSA_SLOT10_ALT
6307 ENUMX
6308   BFD_RELOC_XTENSA_SLOT11_ALT
6309 ENUMX
6310   BFD_RELOC_XTENSA_SLOT12_ALT
6311 ENUMX
6312   BFD_RELOC_XTENSA_SLOT13_ALT
6313 ENUMX
6314   BFD_RELOC_XTENSA_SLOT14_ALT
6315 ENUMDOC
6316   Alternate Xtensa relocations.  Only the slot is encoded in the
6317   relocation.  The meaning of these relocations is opcode-specific.
6318 ENUM
6319   BFD_RELOC_XTENSA_OP0
6320 ENUMX
6321   BFD_RELOC_XTENSA_OP1
6322 ENUMX
6323   BFD_RELOC_XTENSA_OP2
6324 ENUMDOC
6325   Xtensa relocations for backward compatibility.  These have all been
6326   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6327 ENUM
6328   BFD_RELOC_XTENSA_ASM_EXPAND
6329 ENUMDOC
6330   Xtensa relocation to mark that the assembler expanded the
6331   instructions from an original target.  The expansion size is
6332   encoded in the reloc size.
6333 ENUM
6334   BFD_RELOC_XTENSA_ASM_SIMPLIFY
6335 ENUMDOC
6336   Xtensa relocation to mark that the linker should simplify
6337   assembler-expanded instructions.  This is commonly used
6338   internally by the linker after analysis of a
6339   BFD_RELOC_XTENSA_ASM_EXPAND.
6340 ENUM
6341   BFD_RELOC_XTENSA_TLSDESC_FN
6342 ENUMX
6343   BFD_RELOC_XTENSA_TLSDESC_ARG
6344 ENUMX
6345   BFD_RELOC_XTENSA_TLS_DTPOFF
6346 ENUMX
6347   BFD_RELOC_XTENSA_TLS_TPOFF
6348 ENUMX
6349   BFD_RELOC_XTENSA_TLS_FUNC
6350 ENUMX
6351   BFD_RELOC_XTENSA_TLS_ARG
6352 ENUMX
6353   BFD_RELOC_XTENSA_TLS_CALL
6354 ENUMDOC
6355   Xtensa TLS relocations.
6356
6357 ENUM
6358   BFD_RELOC_Z80_DISP8
6359 ENUMDOC
6360   8 bit signed offset in (ix+d) or (iy+d).
6361
6362 ENUM
6363   BFD_RELOC_Z8K_DISP7
6364 ENUMDOC
6365   DJNZ offset.
6366 ENUM
6367   BFD_RELOC_Z8K_CALLR
6368 ENUMDOC
6369   CALR offset.
6370 ENUM
6371   BFD_RELOC_Z8K_IMM4L
6372 ENUMDOC
6373   4 bit value.
6374
6375 ENUM
6376    BFD_RELOC_LM32_CALL
6377 ENUMX
6378    BFD_RELOC_LM32_BRANCH
6379 ENUMX
6380    BFD_RELOC_LM32_16_GOT
6381 ENUMX
6382    BFD_RELOC_LM32_GOTOFF_HI16
6383 ENUMX
6384    BFD_RELOC_LM32_GOTOFF_LO16
6385 ENUMX
6386    BFD_RELOC_LM32_COPY
6387 ENUMX
6388    BFD_RELOC_LM32_GLOB_DAT
6389 ENUMX
6390    BFD_RELOC_LM32_JMP_SLOT
6391 ENUMX
6392    BFD_RELOC_LM32_RELATIVE
6393 ENUMDOC
6394  Lattice Mico32 relocations.
6395
6396 ENUM
6397   BFD_RELOC_MACH_O_SECTDIFF
6398 ENUMDOC
6399   Difference between two section addreses.  Must be followed by a
6400   BFD_RELOC_MACH_O_PAIR.
6401 ENUM
6402   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6403 ENUMDOC
6404   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6405 ENUM
6406   BFD_RELOC_MACH_O_PAIR
6407 ENUMDOC
6408   Pair of relocation.  Contains the first symbol.
6409
6410 ENUM
6411   BFD_RELOC_MACH_O_X86_64_BRANCH32
6412 ENUMX
6413   BFD_RELOC_MACH_O_X86_64_BRANCH8
6414 ENUMDOC
6415   PCREL relocations.  They are marked as branch to create PLT entry if
6416   required.
6417 ENUM
6418   BFD_RELOC_MACH_O_X86_64_GOT
6419 ENUMDOC
6420   Used when referencing a GOT entry.
6421 ENUM
6422   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6423 ENUMDOC
6424   Used when loading a GOT entry with movq.  It is specially marked so that
6425   the linker could optimize the movq to a leaq if possible.
6426 ENUM
6427   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
6428 ENUMDOC
6429   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6430 ENUM
6431   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
6432 ENUMDOC
6433   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6434 ENUM
6435   BFD_RELOC_MACH_O_X86_64_PCREL32_1
6436 ENUMDOC
6437   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6438 ENUM
6439   BFD_RELOC_MACH_O_X86_64_PCREL32_2
6440 ENUMDOC
6441   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6442 ENUM
6443   BFD_RELOC_MACH_O_X86_64_PCREL32_4
6444 ENUMDOC
6445   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6446
6447 ENUM
6448   BFD_RELOC_MICROBLAZE_32_LO
6449 ENUMDOC
6450   This is a 32 bit reloc for the microblaze that stores the
6451   low 16 bits of a value
6452 ENUM
6453   BFD_RELOC_MICROBLAZE_32_LO_PCREL
6454 ENUMDOC
6455   This is a 32 bit pc-relative reloc for the microblaze that
6456   stores the low 16 bits of a value
6457 ENUM
6458   BFD_RELOC_MICROBLAZE_32_ROSDA
6459 ENUMDOC
6460   This is a 32 bit reloc for the microblaze that stores a
6461   value relative to the read-only small data area anchor
6462 ENUM
6463   BFD_RELOC_MICROBLAZE_32_RWSDA
6464 ENUMDOC
6465   This is a 32 bit reloc for the microblaze that stores a
6466   value relative to the read-write small data area anchor
6467 ENUM
6468   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6469 ENUMDOC
6470   This is a 32 bit reloc for the microblaze to handle
6471   expressions of the form "Symbol Op Symbol"
6472 ENUM
6473   BFD_RELOC_MICROBLAZE_64_NONE
6474 ENUMDOC
6475   This is a 64 bit reloc that stores the 32 bit pc relative
6476   value in two words (with an imm instruction).  No relocation is
6477   done here - only used for relaxing
6478 ENUM
6479   BFD_RELOC_MICROBLAZE_64_GOTPC
6480 ENUMDOC
6481   This is a 64 bit reloc that stores the 32 bit pc relative
6482   value in two words (with an imm instruction).  The relocation is
6483   PC-relative GOT offset
6484 ENUM
6485   BFD_RELOC_MICROBLAZE_64_GOT
6486 ENUMDOC
6487   This is a 64 bit reloc that stores the 32 bit pc relative
6488   value in two words (with an imm instruction).  The relocation is
6489   GOT offset
6490 ENUM
6491   BFD_RELOC_MICROBLAZE_64_PLT
6492 ENUMDOC
6493   This is a 64 bit reloc that stores the 32 bit pc relative
6494   value in two words (with an imm instruction).  The relocation is
6495   PC-relative offset into PLT
6496 ENUM
6497   BFD_RELOC_MICROBLAZE_64_GOTOFF
6498 ENUMDOC
6499   This is a 64 bit reloc that stores the 32 bit GOT relative
6500   value in two words (with an imm instruction).  The relocation is
6501   relative offset from _GLOBAL_OFFSET_TABLE_
6502 ENUM
6503   BFD_RELOC_MICROBLAZE_32_GOTOFF
6504 ENUMDOC
6505   This is a 32 bit reloc that stores the 32 bit GOT relative
6506   value in a word.  The relocation is relative offset from
6507   _GLOBAL_OFFSET_TABLE_
6508 ENUM
6509   BFD_RELOC_MICROBLAZE_COPY
6510 ENUMDOC
6511   This is used to tell the dynamic linker to copy the value out of
6512   the dynamic object into the runtime process image.
6513 ENUM
6514   BFD_RELOC_MICROBLAZE_64_TLS
6515 ENUMDOC
6516   Unused Reloc
6517 ENUM
6518   BFD_RELOC_MICROBLAZE_64_TLSGD
6519 ENUMDOC
6520   This is a 64 bit reloc that stores the 32 bit GOT relative value
6521   of the GOT TLS GD info entry in two words (with an imm instruction). The
6522   relocation is GOT offset.
6523 ENUM
6524   BFD_RELOC_MICROBLAZE_64_TLSLD
6525 ENUMDOC
6526   This is a 64 bit reloc that stores the 32 bit GOT relative value
6527   of the GOT TLS LD info entry in two words (with an imm instruction). The
6528   relocation is GOT offset.
6529 ENUM
6530   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6531 ENUMDOC
6532   This is a 32 bit reloc that stores the Module ID to GOT(n).
6533 ENUM
6534   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6535 ENUMDOC
6536   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6537 ENUM
6538   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6539 ENUMDOC
6540   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6541   instruction)
6542 ENUM
6543   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6544 ENUMDOC
6545   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6546   to two words (uses imm instruction).
6547 ENUM
6548   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6549 ENUMDOC
6550   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6551   to two words (uses imm instruction).
6552
6553 ENUM
6554   BFD_RELOC_AARCH64_RELOC_START
6555 ENUMDOC
6556   AArch64 pseudo relocation code to mark the start of the AArch64
6557   relocation enumerators.  N.B. the order of the enumerators is
6558   important as several tables in the AArch64 bfd backend are indexed
6559   by these enumerators; make sure they are all synced.
6560 ENUM
6561   BFD_RELOC_AARCH64_NONE
6562 ENUMDOC
6563   AArch64 null relocation code.
6564 ENUM
6565   BFD_RELOC_AARCH64_64
6566 ENUMX
6567   BFD_RELOC_AARCH64_32
6568 ENUMX
6569   BFD_RELOC_AARCH64_16
6570 ENUMDOC
6571   Basic absolute relocations of N bits.  These are equivalent to
6572 BFD_RELOC_N and they were added to assist the indexing of the howto
6573 table.
6574 ENUM
6575   BFD_RELOC_AARCH64_64_PCREL
6576 ENUMX
6577   BFD_RELOC_AARCH64_32_PCREL
6578 ENUMX
6579   BFD_RELOC_AARCH64_16_PCREL
6580 ENUMDOC
6581   PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL
6582 and they were added to assist the indexing of the howto table.
6583 ENUM
6584   BFD_RELOC_AARCH64_MOVW_G0
6585 ENUMDOC
6586   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6587   of an unsigned address/value.
6588 ENUM
6589   BFD_RELOC_AARCH64_MOVW_G0_NC
6590 ENUMDOC
6591   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
6592   an address/value.  No overflow checking.
6593 ENUM
6594   BFD_RELOC_AARCH64_MOVW_G1
6595 ENUMDOC
6596   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
6597   of an unsigned address/value.
6598 ENUM
6599   BFD_RELOC_AARCH64_MOVW_G1_NC
6600 ENUMDOC
6601   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
6602   of an address/value.  No overflow checking.
6603 ENUM
6604   BFD_RELOC_AARCH64_MOVW_G2
6605 ENUMDOC
6606   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
6607   of an unsigned address/value.
6608 ENUM
6609   BFD_RELOC_AARCH64_MOVW_G2_NC
6610 ENUMDOC
6611   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
6612   of an address/value.  No overflow checking.
6613 ENUM
6614   BFD_RELOC_AARCH64_MOVW_G3
6615 ENUMDOC
6616   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
6617   of a signed or unsigned address/value.
6618 ENUM
6619   BFD_RELOC_AARCH64_MOVW_G0_S
6620 ENUMDOC
6621   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
6622   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6623   value's sign.
6624 ENUM
6625   BFD_RELOC_AARCH64_MOVW_G1_S
6626 ENUMDOC
6627   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
6628   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6629   value's sign.
6630 ENUM
6631   BFD_RELOC_AARCH64_MOVW_G2_S
6632 ENUMDOC
6633   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
6634   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6635   value's sign.
6636 ENUM
6637   BFD_RELOC_AARCH64_LD_LO19_PCREL
6638 ENUMDOC
6639   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
6640   offset.  The lowest two bits must be zero and are not stored in the
6641   instruction, giving a 21 bit signed byte offset.
6642 ENUM
6643   BFD_RELOC_AARCH64_ADR_LO21_PCREL
6644 ENUMDOC
6645   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
6646 ENUM
6647   BFD_RELOC_AARCH64_ADR_HI21_PCREL
6648 ENUMDOC
6649   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6650   offset, giving a 4KB aligned page base address.
6651 ENUM
6652   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
6653 ENUMDOC
6654   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6655   offset, giving a 4KB aligned page base address, but with no overflow
6656   checking.
6657 ENUM
6658   BFD_RELOC_AARCH64_ADD_LO12
6659 ENUMDOC
6660   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
6661   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6662 ENUM
6663   BFD_RELOC_AARCH64_LDST8_LO12
6664 ENUMDOC
6665   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
6666   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6667 ENUM
6668   BFD_RELOC_AARCH64_TSTBR14
6669 ENUMDOC
6670   AArch64 14 bit pc-relative test bit and branch.
6671   The lowest two bits must be zero and are not stored in the instruction,
6672   giving a 16 bit signed byte offset.
6673 ENUM
6674   BFD_RELOC_AARCH64_BRANCH19
6675 ENUMDOC
6676   AArch64 19 bit pc-relative conditional branch and compare & branch.
6677   The lowest two bits must be zero and are not stored in the instruction,
6678   giving a 21 bit signed byte offset.
6679 ENUM
6680   BFD_RELOC_AARCH64_JUMP26
6681 ENUMDOC
6682   AArch64 26 bit pc-relative unconditional branch.
6683   The lowest two bits must be zero and are not stored in the instruction,
6684   giving a 28 bit signed byte offset.
6685 ENUM
6686   BFD_RELOC_AARCH64_CALL26
6687 ENUMDOC
6688   AArch64 26 bit pc-relative unconditional branch and link.
6689   The lowest two bits must be zero and are not stored in the instruction,
6690   giving a 28 bit signed byte offset.
6691 ENUM
6692   BFD_RELOC_AARCH64_LDST16_LO12
6693 ENUMDOC
6694   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
6695   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6696 ENUM
6697   BFD_RELOC_AARCH64_LDST32_LO12
6698 ENUMDOC
6699   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
6700   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6701 ENUM
6702   BFD_RELOC_AARCH64_LDST64_LO12
6703 ENUMDOC
6704   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
6705   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6706 ENUM
6707   BFD_RELOC_AARCH64_LDST128_LO12
6708 ENUMDOC
6709   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
6710   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6711 ENUM
6712   BFD_RELOC_AARCH64_GOT_LD_PREL19
6713 ENUMDOC
6714   AArch64 Load Literal instruction, holding a 19 bit PC relative word
6715   offset of the global offset table entry for a symbol.  The lowest two
6716   bits must be zero and are not stored in the instruction, giving a 21
6717   bit signed byte offset.  This relocation type requires signed overflow
6718   checking.
6719 ENUM
6720   BFD_RELOC_AARCH64_ADR_GOT_PAGE
6721 ENUMDOC
6722   Get to the page base of the global offset table entry for a symbol as
6723   part of an ADRP instruction using a 21 bit PC relative value.Used in
6724   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
6725 ENUM
6726   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
6727 ENUMDOC
6728   Unsigned 12 bit byte offset for 64 bit load/store from the page of
6729   the GOT entry for this symbol.  Used in conjunction with
6730   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in LP64 ABI only.
6731 ENUM
6732   BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
6733 ENUMDOC
6734   Unsigned 12 bit byte offset for 32 bit load/store from the page of
6735   the GOT entry for this symbol.  Used in conjunction with
6736   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in ILP32 ABI only.
6737 ENUM
6738   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
6739 ENUMDOC
6740   Get to the page base of the global offset table entry for a symbols
6741   tls_index structure as part of an adrp instruction using a 21 bit PC
6742   relative value.  Used in conjunction with
6743   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
6744 ENUM
6745   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
6746 ENUMDOC
6747   Unsigned 12 bit byte offset to global offset table entry for a symbols
6748   tls_index structure.  Used in conjunction with
6749   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
6750 ENUM
6751   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
6752 ENUMDOC
6753   AArch64 TLS INITIAL EXEC relocation.
6754 ENUM
6755   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
6756 ENUMDOC
6757   AArch64 TLS INITIAL EXEC relocation.
6758 ENUM
6759   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
6760 ENUMDOC
6761   AArch64 TLS INITIAL EXEC relocation.
6762 ENUM
6763   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
6764 ENUMDOC
6765   AArch64 TLS INITIAL EXEC relocation.
6766 ENUM
6767   BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
6768 ENUMDOC
6769   AArch64 TLS INITIAL EXEC relocation.
6770 ENUM
6771   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
6772 ENUMDOC
6773   AArch64 TLS INITIAL EXEC relocation.
6774 ENUM
6775   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
6776 ENUMDOC
6777   AArch64 TLS LOCAL EXEC relocation.
6778 ENUM
6779   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
6780 ENUMDOC
6781   AArch64 TLS LOCAL EXEC relocation.
6782 ENUM
6783   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
6784 ENUMDOC
6785   AArch64 TLS LOCAL EXEC relocation.
6786 ENUM
6787   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
6788 ENUMDOC
6789   AArch64 TLS LOCAL EXEC relocation.
6790 ENUM
6791   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
6792 ENUMDOC
6793   AArch64 TLS LOCAL EXEC relocation.
6794 ENUM
6795   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
6796 ENUMDOC
6797   AArch64 TLS LOCAL EXEC relocation.
6798 ENUM
6799   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
6800 ENUMDOC
6801   AArch64 TLS LOCAL EXEC relocation.
6802 ENUM
6803   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
6804 ENUMDOC
6805   AArch64 TLS LOCAL EXEC relocation.
6806 ENUM
6807   BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
6808 ENUMDOC
6809   AArch64 TLS DESC relocation.
6810 ENUM
6811   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
6812 ENUMDOC
6813   AArch64 TLS DESC relocation.
6814 ENUM
6815   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
6816 ENUMDOC
6817   AArch64 TLS DESC relocation.
6818 ENUM
6819   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
6820 ENUMDOC
6821   AArch64 TLS DESC relocation.
6822 ENUM
6823   BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
6824 ENUMDOC
6825   AArch64 TLS DESC relocation.
6826 ENUM
6827   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
6828 ENUMDOC
6829   AArch64 TLS DESC relocation.
6830 ENUM
6831   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
6832 ENUMDOC
6833   AArch64 TLS DESC relocation.
6834 ENUM
6835   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
6836 ENUMDOC
6837   AArch64 TLS DESC relocation.
6838 ENUM
6839   BFD_RELOC_AARCH64_TLSDESC_LDR
6840 ENUMDOC
6841   AArch64 TLS DESC relocation.
6842 ENUM
6843   BFD_RELOC_AARCH64_TLSDESC_ADD
6844 ENUMDOC
6845   AArch64 TLS DESC relocation.
6846 ENUM
6847   BFD_RELOC_AARCH64_TLSDESC_CALL
6848 ENUMDOC
6849   AArch64 TLS DESC relocation.
6850 ENUM
6851   BFD_RELOC_AARCH64_COPY
6852 ENUMDOC
6853   AArch64 TLS relocation.
6854 ENUM
6855   BFD_RELOC_AARCH64_GLOB_DAT
6856 ENUMDOC
6857   AArch64 TLS relocation.
6858 ENUM
6859   BFD_RELOC_AARCH64_JUMP_SLOT
6860 ENUMDOC
6861   AArch64 TLS relocation.
6862 ENUM
6863   BFD_RELOC_AARCH64_RELATIVE
6864 ENUMDOC
6865   AArch64 TLS relocation.
6866 ENUM
6867   BFD_RELOC_AARCH64_TLS_DTPMOD
6868 ENUMDOC
6869   AArch64 TLS relocation.
6870 ENUM
6871   BFD_RELOC_AARCH64_TLS_DTPREL
6872 ENUMDOC
6873   AArch64 TLS relocation.
6874 ENUM
6875   BFD_RELOC_AARCH64_TLS_TPREL
6876 ENUMDOC
6877   AArch64 TLS relocation.
6878 ENUM
6879   BFD_RELOC_AARCH64_TLSDESC
6880 ENUMDOC
6881   AArch64 TLS relocation.
6882 ENUM
6883   BFD_RELOC_AARCH64_IRELATIVE
6884 ENUMDOC
6885   AArch64 support for STT_GNU_IFUNC.
6886 ENUM
6887   BFD_RELOC_AARCH64_RELOC_END
6888 ENUMDOC
6889   AArch64 pseudo relocation code to mark the end of the AArch64
6890   relocation enumerators that have direct mapping to ELF reloc codes.
6891   There are a few more enumerators after this one; those are mainly
6892   used by the AArch64 assembler for the internal fixup or to select
6893   one of the above enumerators.
6894 ENUM
6895   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
6896 ENUMDOC
6897   AArch64 pseudo relocation code to be used internally by the AArch64
6898   assembler and not (currently) written to any object files.
6899 ENUM
6900   BFD_RELOC_AARCH64_LDST_LO12
6901 ENUMDOC
6902   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
6903   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6904 ENUM
6905   BFD_RELOC_AARCH64_LD_GOT_LO12_NC
6906 ENUMDOC
6907   AArch64 pseudo relocation code to be used internally by the AArch64
6908   assembler and not (currently) written to any object files.
6909 ENUM
6910   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
6911 ENUMDOC
6912   AArch64 pseudo relocation code to be used internally by the AArch64
6913   assembler and not (currently) written to any object files.
6914 ENUM
6915   BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
6916 ENUMDOC
6917   AArch64 pseudo relocation code to be used internally by the AArch64
6918   assembler and not (currently) written to any object files.
6919
6920 ENUM
6921   BFD_RELOC_TILEPRO_COPY
6922 ENUMX
6923   BFD_RELOC_TILEPRO_GLOB_DAT
6924 ENUMX
6925   BFD_RELOC_TILEPRO_JMP_SLOT
6926 ENUMX
6927   BFD_RELOC_TILEPRO_RELATIVE
6928 ENUMX
6929   BFD_RELOC_TILEPRO_BROFF_X1
6930 ENUMX
6931   BFD_RELOC_TILEPRO_JOFFLONG_X1
6932 ENUMX
6933   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
6934 ENUMX
6935   BFD_RELOC_TILEPRO_IMM8_X0
6936 ENUMX
6937   BFD_RELOC_TILEPRO_IMM8_Y0
6938 ENUMX
6939   BFD_RELOC_TILEPRO_IMM8_X1
6940 ENUMX
6941   BFD_RELOC_TILEPRO_IMM8_Y1
6942 ENUMX
6943   BFD_RELOC_TILEPRO_DEST_IMM8_X1
6944 ENUMX
6945   BFD_RELOC_TILEPRO_MT_IMM15_X1
6946 ENUMX
6947   BFD_RELOC_TILEPRO_MF_IMM15_X1
6948 ENUMX
6949   BFD_RELOC_TILEPRO_IMM16_X0
6950 ENUMX
6951   BFD_RELOC_TILEPRO_IMM16_X1
6952 ENUMX
6953   BFD_RELOC_TILEPRO_IMM16_X0_LO
6954 ENUMX
6955   BFD_RELOC_TILEPRO_IMM16_X1_LO
6956 ENUMX
6957   BFD_RELOC_TILEPRO_IMM16_X0_HI
6958 ENUMX
6959   BFD_RELOC_TILEPRO_IMM16_X1_HI
6960 ENUMX
6961   BFD_RELOC_TILEPRO_IMM16_X0_HA
6962 ENUMX
6963   BFD_RELOC_TILEPRO_IMM16_X1_HA
6964 ENUMX
6965   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
6966 ENUMX
6967   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
6968 ENUMX
6969   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
6970 ENUMX
6971   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
6972 ENUMX
6973   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
6974 ENUMX
6975   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
6976 ENUMX
6977   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
6978 ENUMX
6979   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
6980 ENUMX
6981   BFD_RELOC_TILEPRO_IMM16_X0_GOT
6982 ENUMX
6983   BFD_RELOC_TILEPRO_IMM16_X1_GOT
6984 ENUMX
6985   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
6986 ENUMX
6987   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
6988 ENUMX
6989   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
6990 ENUMX
6991   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
6992 ENUMX
6993   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
6994 ENUMX
6995   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
6996 ENUMX
6997   BFD_RELOC_TILEPRO_MMSTART_X0
6998 ENUMX
6999   BFD_RELOC_TILEPRO_MMEND_X0
7000 ENUMX
7001   BFD_RELOC_TILEPRO_MMSTART_X1
7002 ENUMX
7003   BFD_RELOC_TILEPRO_MMEND_X1
7004 ENUMX
7005   BFD_RELOC_TILEPRO_SHAMT_X0
7006 ENUMX
7007   BFD_RELOC_TILEPRO_SHAMT_X1
7008 ENUMX
7009   BFD_RELOC_TILEPRO_SHAMT_Y0
7010 ENUMX
7011   BFD_RELOC_TILEPRO_SHAMT_Y1
7012 ENUMX
7013   BFD_RELOC_TILEPRO_TLS_GD_CALL
7014 ENUMX
7015   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7016 ENUMX
7017   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7018 ENUMX
7019   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7020 ENUMX
7021   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7022 ENUMX
7023   BFD_RELOC_TILEPRO_TLS_IE_LOAD
7024 ENUMX
7025   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7026 ENUMX
7027   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7028 ENUMX
7029   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7030 ENUMX
7031   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7032 ENUMX
7033   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7034 ENUMX
7035   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7036 ENUMX
7037   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7038 ENUMX
7039   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7040 ENUMX
7041   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7042 ENUMX
7043   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7044 ENUMX
7045   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7046 ENUMX
7047   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7048 ENUMX
7049   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7050 ENUMX
7051   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7052 ENUMX
7053   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7054 ENUMX
7055   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7056 ENUMX
7057   BFD_RELOC_TILEPRO_TLS_DTPMOD32
7058 ENUMX
7059   BFD_RELOC_TILEPRO_TLS_DTPOFF32
7060 ENUMX
7061   BFD_RELOC_TILEPRO_TLS_TPOFF32
7062 ENUMX
7063   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7064 ENUMX
7065   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7066 ENUMX
7067   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7068 ENUMX
7069   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7070 ENUMX
7071   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7072 ENUMX
7073   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7074 ENUMX
7075   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7076 ENUMX
7077   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7078 ENUMDOC
7079   Tilera TILEPro Relocations.
7080 ENUM
7081   BFD_RELOC_TILEGX_HW0
7082 ENUMX
7083   BFD_RELOC_TILEGX_HW1
7084 ENUMX
7085   BFD_RELOC_TILEGX_HW2
7086 ENUMX
7087   BFD_RELOC_TILEGX_HW3
7088 ENUMX
7089   BFD_RELOC_TILEGX_HW0_LAST
7090 ENUMX
7091   BFD_RELOC_TILEGX_HW1_LAST
7092 ENUMX
7093   BFD_RELOC_TILEGX_HW2_LAST
7094 ENUMX
7095   BFD_RELOC_TILEGX_COPY
7096 ENUMX
7097   BFD_RELOC_TILEGX_GLOB_DAT
7098 ENUMX
7099   BFD_RELOC_TILEGX_JMP_SLOT
7100 ENUMX
7101   BFD_RELOC_TILEGX_RELATIVE
7102 ENUMX
7103   BFD_RELOC_TILEGX_BROFF_X1
7104 ENUMX
7105   BFD_RELOC_TILEGX_JUMPOFF_X1
7106 ENUMX
7107   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7108 ENUMX
7109   BFD_RELOC_TILEGX_IMM8_X0
7110 ENUMX
7111   BFD_RELOC_TILEGX_IMM8_Y0
7112 ENUMX
7113   BFD_RELOC_TILEGX_IMM8_X1
7114 ENUMX
7115   BFD_RELOC_TILEGX_IMM8_Y1
7116 ENUMX
7117   BFD_RELOC_TILEGX_DEST_IMM8_X1
7118 ENUMX
7119   BFD_RELOC_TILEGX_MT_IMM14_X1
7120 ENUMX
7121   BFD_RELOC_TILEGX_MF_IMM14_X1
7122 ENUMX
7123   BFD_RELOC_TILEGX_MMSTART_X0
7124 ENUMX
7125   BFD_RELOC_TILEGX_MMEND_X0
7126 ENUMX
7127   BFD_RELOC_TILEGX_SHAMT_X0
7128 ENUMX
7129   BFD_RELOC_TILEGX_SHAMT_X1
7130 ENUMX
7131   BFD_RELOC_TILEGX_SHAMT_Y0
7132 ENUMX
7133   BFD_RELOC_TILEGX_SHAMT_Y1
7134 ENUMX
7135   BFD_RELOC_TILEGX_IMM16_X0_HW0
7136 ENUMX
7137   BFD_RELOC_TILEGX_IMM16_X1_HW0
7138 ENUMX
7139   BFD_RELOC_TILEGX_IMM16_X0_HW1
7140 ENUMX
7141   BFD_RELOC_TILEGX_IMM16_X1_HW1
7142 ENUMX
7143   BFD_RELOC_TILEGX_IMM16_X0_HW2
7144 ENUMX
7145   BFD_RELOC_TILEGX_IMM16_X1_HW2
7146 ENUMX
7147   BFD_RELOC_TILEGX_IMM16_X0_HW3
7148 ENUMX
7149   BFD_RELOC_TILEGX_IMM16_X1_HW3
7150 ENUMX
7151   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7152 ENUMX
7153   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7154 ENUMX
7155   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7156 ENUMX
7157   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7158 ENUMX
7159   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7160 ENUMX
7161   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7162 ENUMX
7163   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7164 ENUMX
7165   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7166 ENUMX
7167   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7168 ENUMX
7169   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7170 ENUMX
7171   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7172 ENUMX
7173   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7174 ENUMX
7175   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7176 ENUMX
7177   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7178 ENUMX
7179   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7180 ENUMX
7181   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7182 ENUMX
7183   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7184 ENUMX
7185   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7186 ENUMX
7187   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7188 ENUMX
7189   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7190 ENUMX
7191   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7192 ENUMX
7193   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7194 ENUMX
7195   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7196 ENUMX
7197   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7198 ENUMX
7199   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7200 ENUMX
7201   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7202 ENUMX
7203   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7204 ENUMX
7205   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7206 ENUMX
7207   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7208 ENUMX
7209   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7210 ENUMX
7211   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7212 ENUMX
7213   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7214 ENUMX
7215   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7216 ENUMX
7217   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7218 ENUMX
7219   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7220 ENUMX
7221   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7222 ENUMX
7223   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7224 ENUMX
7225   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7226 ENUMX
7227   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7228 ENUMX
7229   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7230 ENUMX
7231   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7232 ENUMX
7233   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7234 ENUMX
7235   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7236 ENUMX
7237   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7238 ENUMX
7239   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7240 ENUMX
7241   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7242 ENUMX
7243   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7244 ENUMX
7245   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7246 ENUMX
7247   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7248 ENUMX
7249   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7250 ENUMX
7251   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7252 ENUMX
7253   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7254 ENUMX
7255   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7256 ENUMX
7257   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7258 ENUMX
7259   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7260 ENUMX
7261   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7262 ENUMX
7263   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7264 ENUMX
7265   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7266 ENUMX
7267   BFD_RELOC_TILEGX_TLS_DTPMOD64
7268 ENUMX
7269   BFD_RELOC_TILEGX_TLS_DTPOFF64
7270 ENUMX
7271   BFD_RELOC_TILEGX_TLS_TPOFF64
7272 ENUMX
7273   BFD_RELOC_TILEGX_TLS_DTPMOD32
7274 ENUMX
7275   BFD_RELOC_TILEGX_TLS_DTPOFF32
7276 ENUMX
7277   BFD_RELOC_TILEGX_TLS_TPOFF32
7278 ENUMX
7279   BFD_RELOC_TILEGX_TLS_GD_CALL
7280 ENUMX
7281   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7282 ENUMX
7283   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7284 ENUMX
7285   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7286 ENUMX
7287   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7288 ENUMX
7289   BFD_RELOC_TILEGX_TLS_IE_LOAD
7290 ENUMX
7291   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7292 ENUMX
7293   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7294 ENUMX
7295   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7296 ENUMX
7297   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7298 ENUMDOC
7299   Tilera TILE-Gx Relocations.
7300 ENUM
7301   BFD_RELOC_EPIPHANY_SIMM8
7302 ENUMDOC
7303   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7304 ENUM
7305   BFD_RELOC_EPIPHANY_SIMM24
7306 ENUMDOC
7307   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7308 ENUM
7309   BFD_RELOC_EPIPHANY_HIGH
7310 ENUMDOC
7311   Adapteva EPIPHANY - 16 most-significant bits of absolute address
7312 ENUM
7313   BFD_RELOC_EPIPHANY_LOW
7314 ENUMDOC
7315   Adapteva EPIPHANY - 16 least-significant bits of absolute address
7316 ENUM
7317   BFD_RELOC_EPIPHANY_SIMM11
7318 ENUMDOC
7319   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7320 ENUM
7321   BFD_RELOC_EPIPHANY_IMM11
7322 ENUMDOC
7323   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7324 ENUM
7325   BFD_RELOC_EPIPHANY_IMM8
7326 ENUMDOC
7327   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7328
7329
7330 ENDSENUM
7331   BFD_RELOC_UNUSED
7332 CODE_FRAGMENT
7333 .
7334 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
7335 */
7336
7337 /*
7338 FUNCTION
7339         bfd_reloc_type_lookup
7340         bfd_reloc_name_lookup
7341
7342 SYNOPSIS
7343         reloc_howto_type *bfd_reloc_type_lookup
7344           (bfd *abfd, bfd_reloc_code_real_type code);
7345         reloc_howto_type *bfd_reloc_name_lookup
7346           (bfd *abfd, const char *reloc_name);
7347
7348 DESCRIPTION
7349         Return a pointer to a howto structure which, when
7350         invoked, will perform the relocation @var{code} on data from the
7351         architecture noted.
7352
7353 */
7354
7355 reloc_howto_type *
7356 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7357 {
7358   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
7359 }
7360
7361 reloc_howto_type *
7362 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
7363 {
7364   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
7365 }
7366
7367 static reloc_howto_type bfd_howto_32 =
7368 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
7369
7370 /*
7371 INTERNAL_FUNCTION
7372         bfd_default_reloc_type_lookup
7373
7374 SYNOPSIS
7375         reloc_howto_type *bfd_default_reloc_type_lookup
7376           (bfd *abfd, bfd_reloc_code_real_type  code);
7377
7378 DESCRIPTION
7379         Provides a default relocation lookup routine for any architecture.
7380
7381 */
7382
7383 reloc_howto_type *
7384 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7385 {
7386   switch (code)
7387     {
7388     case BFD_RELOC_CTOR:
7389       /* The type of reloc used in a ctor, which will be as wide as the
7390          address - so either a 64, 32, or 16 bitter.  */
7391       switch (bfd_arch_bits_per_address (abfd))
7392         {
7393         case 64:
7394           BFD_FAIL ();
7395         case 32:
7396           return &bfd_howto_32;
7397         case 16:
7398           BFD_FAIL ();
7399         default:
7400           BFD_FAIL ();
7401         }
7402     default:
7403       BFD_FAIL ();
7404     }
7405   return NULL;
7406 }
7407
7408 /*
7409 FUNCTION
7410         bfd_get_reloc_code_name
7411
7412 SYNOPSIS
7413         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
7414
7415 DESCRIPTION
7416         Provides a printable name for the supplied relocation code.
7417         Useful mainly for printing error messages.
7418 */
7419
7420 const char *
7421 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
7422 {
7423   if (code > BFD_RELOC_UNUSED)
7424     return 0;
7425   return bfd_reloc_code_real_names[code];
7426 }
7427
7428 /*
7429 INTERNAL_FUNCTION
7430         bfd_generic_relax_section
7431
7432 SYNOPSIS
7433         bfd_boolean bfd_generic_relax_section
7434           (bfd *abfd,
7435            asection *section,
7436            struct bfd_link_info *,
7437            bfd_boolean *);
7438
7439 DESCRIPTION
7440         Provides default handling for relaxing for back ends which
7441         don't do relaxing.
7442 */
7443
7444 bfd_boolean
7445 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
7446                            asection *section ATTRIBUTE_UNUSED,
7447                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
7448                            bfd_boolean *again)
7449 {
7450   if (link_info->relocatable)
7451     (*link_info->callbacks->einfo)
7452       (_("%P%F: --relax and -r may not be used together\n"));
7453
7454   *again = FALSE;
7455   return TRUE;
7456 }
7457
7458 /*
7459 INTERNAL_FUNCTION
7460         bfd_generic_gc_sections
7461
7462 SYNOPSIS
7463         bfd_boolean bfd_generic_gc_sections
7464           (bfd *, struct bfd_link_info *);
7465
7466 DESCRIPTION
7467         Provides default handling for relaxing for back ends which
7468         don't do section gc -- i.e., does nothing.
7469 */
7470
7471 bfd_boolean
7472 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
7473                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
7474 {
7475   return TRUE;
7476 }
7477
7478 /*
7479 INTERNAL_FUNCTION
7480         bfd_generic_lookup_section_flags
7481
7482 SYNOPSIS
7483         bfd_boolean bfd_generic_lookup_section_flags
7484           (struct bfd_link_info *, struct flag_info *, asection *);
7485
7486 DESCRIPTION
7487         Provides default handling for section flags lookup
7488         -- i.e., does nothing.
7489         Returns FALSE if the section should be omitted, otherwise TRUE.
7490 */
7491
7492 bfd_boolean
7493 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
7494                                   struct flag_info *flaginfo,
7495                                   asection *section ATTRIBUTE_UNUSED)
7496 {
7497   if (flaginfo != NULL)
7498     {
7499       (*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
7500       return FALSE;
7501     }
7502   return TRUE;
7503 }
7504
7505 /*
7506 INTERNAL_FUNCTION
7507         bfd_generic_merge_sections
7508
7509 SYNOPSIS
7510         bfd_boolean bfd_generic_merge_sections
7511           (bfd *, struct bfd_link_info *);
7512
7513 DESCRIPTION
7514         Provides default handling for SEC_MERGE section merging for back ends
7515         which don't have SEC_MERGE support -- i.e., does nothing.
7516 */
7517
7518 bfd_boolean
7519 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
7520                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
7521 {
7522   return TRUE;
7523 }
7524
7525 /*
7526 INTERNAL_FUNCTION
7527         bfd_generic_get_relocated_section_contents
7528
7529 SYNOPSIS
7530         bfd_byte *bfd_generic_get_relocated_section_contents
7531           (bfd *abfd,
7532            struct bfd_link_info *link_info,
7533            struct bfd_link_order *link_order,
7534            bfd_byte *data,
7535            bfd_boolean relocatable,
7536            asymbol **symbols);
7537
7538 DESCRIPTION
7539         Provides default handling of relocation effort for back ends
7540         which can't be bothered to do it efficiently.
7541
7542 */
7543
7544 bfd_byte *
7545 bfd_generic_get_relocated_section_contents (bfd *abfd,
7546                                             struct bfd_link_info *link_info,
7547                                             struct bfd_link_order *link_order,
7548                                             bfd_byte *data,
7549                                             bfd_boolean relocatable,
7550                                             asymbol **symbols)
7551 {
7552   bfd *input_bfd = link_order->u.indirect.section->owner;
7553   asection *input_section = link_order->u.indirect.section;
7554   long reloc_size;
7555   arelent **reloc_vector;
7556   long reloc_count;
7557
7558   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
7559   if (reloc_size < 0)
7560     return NULL;
7561
7562   /* Read in the section.  */
7563   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
7564     return NULL;
7565
7566   if (reloc_size == 0)
7567     return data;
7568
7569   reloc_vector = (arelent **) bfd_malloc (reloc_size);
7570   if (reloc_vector == NULL)
7571     return NULL;
7572
7573   reloc_count = bfd_canonicalize_reloc (input_bfd,
7574                                         input_section,
7575                                         reloc_vector,
7576                                         symbols);
7577   if (reloc_count < 0)
7578     goto error_return;
7579
7580   if (reloc_count > 0)
7581     {
7582       arelent **parent;
7583       for (parent = reloc_vector; *parent != NULL; parent++)
7584         {
7585           char *error_message = NULL;
7586           asymbol *symbol;
7587           bfd_reloc_status_type r;
7588
7589           symbol = *(*parent)->sym_ptr_ptr;
7590           if (symbol->section && discarded_section (symbol->section))
7591             {
7592               bfd_byte *p;
7593               static reloc_howto_type none_howto
7594                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
7595                          "unused", FALSE, 0, 0, FALSE);
7596
7597               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
7598               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
7599                                    p);
7600               (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
7601               (*parent)->addend = 0;
7602               (*parent)->howto = &none_howto;
7603               r = bfd_reloc_ok;
7604             }
7605           else
7606             r = bfd_perform_relocation (input_bfd,
7607                                         *parent,
7608                                         data,
7609                                         input_section,
7610                                         relocatable ? abfd : NULL,
7611                                         &error_message);
7612
7613           if (relocatable)
7614             {
7615               asection *os = input_section->output_section;
7616
7617               /* A partial link, so keep the relocs.  */
7618               os->orelocation[os->reloc_count] = *parent;
7619               os->reloc_count++;
7620             }
7621
7622           if (r != bfd_reloc_ok)
7623             {
7624               switch (r)
7625                 {
7626                 case bfd_reloc_undefined:
7627                   if (!((*link_info->callbacks->undefined_symbol)
7628                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7629                          input_bfd, input_section, (*parent)->address,
7630                          TRUE)))
7631                     goto error_return;
7632                   break;
7633                 case bfd_reloc_dangerous:
7634                   BFD_ASSERT (error_message != NULL);
7635                   if (!((*link_info->callbacks->reloc_dangerous)
7636                         (link_info, error_message, input_bfd, input_section,
7637                          (*parent)->address)))
7638                     goto error_return;
7639                   break;
7640                 case bfd_reloc_overflow:
7641                   if (!((*link_info->callbacks->reloc_overflow)
7642                         (link_info, NULL,
7643                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7644                          (*parent)->howto->name, (*parent)->addend,
7645                          input_bfd, input_section, (*parent)->address)))
7646                     goto error_return;
7647                   break;
7648                 case bfd_reloc_outofrange:
7649                   /* PR ld/13730:
7650                      This error can result when processing some partially
7651                      complete binaries.  Do not abort, but issue an error
7652                      message instead.  */
7653                   link_info->callbacks->einfo
7654                     (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
7655                      abfd, input_section, * parent);
7656                   goto error_return;
7657
7658                 default:
7659                   abort ();
7660                   break;
7661                 }
7662
7663             }
7664         }
7665     }
7666
7667   free (reloc_vector);
7668   return data;
7669
7670 error_return:
7671   free (reloc_vector);
7672   return NULL;
7673 }