bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright (C) 1990-2016 Free Software Foundation, Inc.
   3    Written by Cygnus Support.
   4
   5    This file is part of BFD, the Binary File Descriptor library.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 /*
  23 SECTION
  24         Relocations
  25
  26         BFD maintains relocations in much the same way it maintains
  27         symbols: they are left alone until required, then read in
  28         en-masse and translated into an internal form.  A common
  29         routine <<bfd_perform_relocation>> acts upon the
  30         canonical form to do the fixup.
  31
  32         Relocations are maintained on a per section basis,
  33         while symbols are maintained on a per BFD basis.
  34
  35         All that a back end has to do to fit the BFD interface is to create
  36         a <<struct reloc_cache_entry>> for each relocation
  37         in a particular section, and fill in the right bits of the structures.
  38
  39 @menu
  40 @* typedef arelent::
  41 @* howto manager::
  42 @end menu
  43
  44 */
  45
  46 /* DO compile in the reloc_code name table from libbfd.h.  */
  47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  48
  49 #include "sysdep.h"
  50 #include "bfd.h"
  51 #include "bfdlink.h"
  52 #include "libbfd.h"
  53 /*
  54 DOCDD
  55 INODE
  56         typedef arelent, howto manager, Relocations, Relocations
  57
  58 SUBSECTION
  59         typedef arelent
  60
  61         This is the structure of a relocation entry:
  62
  63 CODE_FRAGMENT
  64 .
  65 .typedef enum bfd_reloc_status
  66 .{
  67 .  {* No errors detected.  *}
  68 .  bfd_reloc_ok,
  69 .
  70 .  {* The relocation was performed, but there was an overflow.  *}
  71 .  bfd_reloc_overflow,
  72 .
  73 .  {* The address to relocate was not within the section supplied.  *}
  74 .  bfd_reloc_outofrange,
  75 .
  76 .  {* Used by special functions.  *}
  77 .  bfd_reloc_continue,
  78 .
  79 .  {* Unsupported relocation size requested.  *}
  80 .  bfd_reloc_notsupported,
  81 .
  82 .  {* Unused.  *}
  83 .  bfd_reloc_other,
  84 .
  85 .  {* The symbol to relocate against was undefined.  *}
  86 .  bfd_reloc_undefined,
  87 .
  88 .  {* The relocation was performed, but may not be ok - presently
  89 .     generated only when linking i960 coff files with i960 b.out
  90 .     symbols.  If this type is returned, the error_message argument
  91 .     to bfd_perform_relocation will be set.  *}
  92 .  bfd_reloc_dangerous
  93 . }
  94 . bfd_reloc_status_type;
  95 .
  96 .
  97 .typedef struct reloc_cache_entry
  98 .{
  99 .  {* A pointer into the canonical table of pointers.  *}
 100 .  struct bfd_symbol **sym_ptr_ptr;
 101 .
 102 .  {* offset in section.  *}
 103 .  bfd_size_type address;
 104 .
 105 .  {* addend for relocation value.  *}
 106 .  bfd_vma addend;
 107 .
 108 .  {* Pointer to how to perform the required relocation.  *}
 109 .  reloc_howto_type *howto;
 110 .
 111 .}
 112 .arelent;
 113 .
 114 */
 115
 116 /*
 117 DESCRIPTION
 118
 119         Here is a description of each of the fields within an <<arelent>>:
 120
 121         o <<sym_ptr_ptr>>
 122
 123         The symbol table pointer points to a pointer to the symbol
 124         associated with the relocation request.  It is the pointer
 125         into the table returned by the back end's
 126         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 127         referenced through a pointer to a pointer so that tools like
 128         the linker can fix up all the symbols of the same name by
 129         modifying only one pointer. The relocation routine looks in
 130         the symbol and uses the base of the section the symbol is
 131         attached to and the value of the symbol as the initial
 132         relocation offset. If the symbol pointer is zero, then the
 133         section provided is looked up.
 134
 135         o <<address>>
 136
 137         The <<address>> field gives the offset in bytes from the base of
 138         the section data which owns the relocation record to the first
 139         byte of relocatable information. The actual data relocated
 140         will be relative to this point; for example, a relocation
 141         type which modifies the bottom two bytes of a four byte word
 142         would not touch the first byte pointed to in a big endian
 143         world.
 144
 145         o <<addend>>
 146
 147         The <<addend>> is a value provided by the back end to be added (!)
 148         to the relocation offset. Its interpretation is dependent upon
 149         the howto. For example, on the 68k the code:
 150
 151 |        char foo[];
 152 |        main()
 153 |                {
 154 |                return foo[0x12345678];
 155 |                }
 156
 157         Could be compiled into:
 158
 159 |        linkw fp,#-4
 160 |        moveb @@#12345678,d0
 161 |        extbl d0
 162 |        unlk fp
 163 |        rts
 164
 165         This could create a reloc pointing to <<foo>>, but leave the
 166         offset in the data, something like:
 167
 168 |RELOCATION RECORDS FOR [.text]:
 169 |offset   type      value
 170 |00000006 32        _foo
 171 |
 172 |00000000 4e56 fffc          ; linkw fp,#-4
 173 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 174 |0000000a 49c0               ; extbl d0
 175 |0000000c 4e5e               ; unlk fp
 176 |0000000e 4e75               ; rts
 177
 178         Using coff and an 88k, some instructions don't have enough
 179         space in them to represent the full address range, and
 180         pointers have to be loaded in two parts. So you'd get something like:
 181
 182 |        or.u     r13,r0,hi16(_foo+0x12345678)
 183 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 184 |        jmp      r1
 185
 186         This should create two relocs, both pointing to <<_foo>>, and with
 187         0x12340000 in their addend field. The data would consist of:
 188
 189 |RELOCATION RECORDS FOR [.text]:
 190 |offset   type      value
 191 |00000002 HVRT16    _foo+0x12340000
 192 |00000006 LVRT16    _foo+0x12340000
 193 |
 194 |00000000 5da05678           ; or.u r13,r0,0x5678
 195 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 196 |00000008 f400c001           ; jmp r1
 197
 198         The relocation routine digs out the value from the data, adds
 199         it to the addend to get the original offset, and then adds the
 200         value of <<_foo>>. Note that all 32 bits have to be kept around
 201         somewhere, to cope with carry from bit 15 to bit 16.
 202
 203         One further example is the sparc and the a.out format. The
 204         sparc has a similar problem to the 88k, in that some
 205         instructions don't have room for an entire offset, but on the
 206         sparc the parts are created in odd sized lumps. The designers of
 207         the a.out format chose to not use the data within the section
 208         for storing part of the offset; all the offset is kept within
 209         the reloc. Anything in the data should be ignored.
 210
 211 |        save %sp,-112,%sp
 212 |        sethi %hi(_foo+0x12345678),%g2
 213 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 214 |        ret
 215 |        restore
 216
 217         Both relocs contain a pointer to <<foo>>, and the offsets
 218         contain junk.
 219
 220 |RELOCATION RECORDS FOR [.text]:
 221 |offset   type      value
 222 |00000004 HI22      _foo+0x12345678
 223 |00000008 LO10      _foo+0x12345678
 224 |
 225 |00000000 9de3bf90     ; save %sp,-112,%sp
 226 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 227 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 228 |0000000c 81c7e008     ; ret
 229 |00000010 81e80000     ; restore
 230
 231         o <<howto>>
 232
 233         The <<howto>> field can be imagined as a
 234         relocation instruction. It is a pointer to a structure which
 235         contains information on what to do with all of the other
 236         information in the reloc record and data section. A back end
 237         would normally have a relocation instruction set and turn
 238         relocations into pointers to the correct structure on input -
 239         but it would be possible to create each howto field on demand.
 240
 241 */
 242
 243 /*
 244 SUBSUBSECTION
 245         <<enum complain_overflow>>
 246
 247         Indicates what sort of overflow checking should be done when
 248         performing a relocation.
 249
 250 CODE_FRAGMENT
 251 .
 252 .enum complain_overflow
 253 .{
 254 .  {* Do not complain on overflow.  *}
 255 .  complain_overflow_dont,
 256 .
 257 .  {* Complain if the value overflows when considered as a signed
 258 .     number one bit larger than the field.  ie. A bitfield of N bits
 259 .     is allowed to represent -2**n to 2**n-1.  *}
 260 .  complain_overflow_bitfield,
 261 .
 262 .  {* Complain if the value overflows when considered as a signed
 263 .     number.  *}
 264 .  complain_overflow_signed,
 265 .
 266 .  {* Complain if the value overflows when considered as an
 267 .     unsigned number.  *}
 268 .  complain_overflow_unsigned
 269 .};
 270
 271 */
 272
 273 /*
 274 SUBSUBSECTION
 275         <<reloc_howto_type>>
 276
 277         The <<reloc_howto_type>> is a structure which contains all the
 278         information that libbfd needs to know to tie up a back end's data.
 279
 280 CODE_FRAGMENT
 281 .struct bfd_symbol;             {* Forward declaration.  *}
 282 .
 283 .struct reloc_howto_struct
 284 .{
 285 .  {*  The type field has mainly a documentary use - the back end can
 286 .      do what it wants with it, though normally the back end's
 287 .      external idea of what a reloc number is stored
 288 .      in this field.  For example, a PC relative word relocation
 289 .      in a coff environment has the type 023 - because that's
 290 .      what the outside world calls a R_PCRWORD reloc.  *}
 291 .  unsigned int type;
 292 .
 293 .  {*  The value the final relocation is shifted right by.  This drops
 294 .      unwanted data from the relocation.  *}
 295 .  unsigned int rightshift;
 296 .
 297 .  {*  The size of the item to be relocated.  This is *not* a
 298 .      power-of-two measure.  To get the number of bytes operated
 299 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 300 .  int size;
 301 .
 302 .  {*  The number of bits in the item to be relocated.  This is used
 303 .      when doing overflow checking.  *}
 304 .  unsigned int bitsize;
 305 .
 306 .  {*  The relocation is relative to the field being relocated.  *}
 307 .  bfd_boolean pc_relative;
 308 .
 309 .  {*  The bit position of the reloc value in the destination.
 310 .      The relocated value is left shifted by this amount.  *}
 311 .  unsigned int bitpos;
 312 .
 313 .  {* What type of overflow error should be checked for when
 314 .     relocating.  *}
 315 .  enum complain_overflow complain_on_overflow;
 316 .
 317 .  {* If this field is non null, then the supplied function is
 318 .     called rather than the normal function.  This allows really
 319 .     strange relocation methods to be accommodated (e.g., i960 callj
 320 .     instructions).  *}
 321 .  bfd_reloc_status_type (*special_function)
 322 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 323 .     bfd *, char **);
 324 .
 325 .  {* The textual name of the relocation type.  *}
 326 .  char *name;
 327 .
 328 .  {* Some formats record a relocation addend in the section contents
 329 .     rather than with the relocation.  For ELF formats this is the
 330 .     distinction between USE_REL and USE_RELA (though the code checks
 331 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 332 .     addend is recorded with the section contents; when performing a
 333 .     partial link (ld -r) the section contents (the data) will be
 334 .     modified.  The value of this field is FALSE if addends are
 335 .     recorded with the relocation (in arelent.addend); when performing
 336 .     a partial link the relocation will be modified.
 337 .     All relocations for all ELF USE_RELA targets should set this field
 338 .     to FALSE (values of TRUE should be looked on with suspicion).
 339 .     However, the converse is not true: not all relocations of all ELF
 340 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 341 .     to each particular target.  For relocs that aren't used in partial
 342 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 343 .  bfd_boolean partial_inplace;
 344 .
 345 .  {* src_mask selects the part of the instruction (or data) to be used
 346 .     in the relocation sum.  If the target relocations don't have an
 347 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 348 .     dst_mask to extract the addend from the section contents.  If
 349 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 350 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 351 .     bogus as in those cases the value in the dst_mask part of the
 352 .     section contents should be treated as garbage.  *}
 353 .  bfd_vma src_mask;
 354 .
 355 .  {* dst_mask selects which parts of the instruction (or data) are
 356 .     replaced with a relocated value.  *}
 357 .  bfd_vma dst_mask;
 358 .
 359 .  {* When some formats create PC relative instructions, they leave
 360 .     the value of the pc of the place being relocated in the offset
 361 .     slot of the instruction, so that a PC relative relocation can
 362 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 363 .     Some formats leave the displacement part of an instruction
 364 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 365 .  bfd_boolean pcrel_offset;
 366 .};
 367 .
 368 */
 369
 370 /*
 371 FUNCTION
 372         The HOWTO Macro
 373
 374 DESCRIPTION
 375         The HOWTO define is horrible and will go away.
 376
 377 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 378 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 379
 380 DESCRIPTION
 381         And will be replaced with the totally magic way. But for the
 382         moment, we are compatible, so do it this way.
 383
 384 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 385 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 386 .         NAME, FALSE, 0, 0, IN)
 387 .
 388
 389 DESCRIPTION
 390         This is used to fill in an empty howto entry in an array.
 391
 392 .#define EMPTY_HOWTO(C) \
 393 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 394 .         NULL, FALSE, 0, 0, FALSE)
 395 .
 396
 397 DESCRIPTION
 398         Helper routine to turn a symbol into a relocation value.
 399
 400 .#define HOWTO_PREPARE(relocation, symbol)               \
 401 .  {                                                     \
 402 .    if (symbol != NULL)                                 \
 403 .      {                                                 \
 404 .        if (bfd_is_com_section (symbol->section))       \
 405 .          {                                             \
 406 .            relocation = 0;                             \
 407 .          }                                             \
 408 .        else                                            \
 409 .          {                                             \
 410 .            relocation = symbol->value;                 \
 411 .          }                                             \
 412 .      }                                                 \
 413 .  }
 414 .
 415 */
 416
 417 /*
 418 FUNCTION
 419         bfd_get_reloc_size
 420
 421 SYNOPSIS
 422         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 423
 424 DESCRIPTION
 425         For a reloc_howto_type that operates on a fixed number of bytes,
 426         this returns the number of bytes operated on.
 427  */
 428
 429 unsigned int
 430 bfd_get_reloc_size (reloc_howto_type *howto)
 431 {
 432   switch (howto->size)
 433     {
 434     case 0: return 1;
 435     case 1: return 2;
 436     case 2: return 4;
 437     case 3: return 0;
 438     case 4: return 8;
 439     case 8: return 16;
 440     case -1: return 2;
 441     case -2: return 4;
 442     default: abort ();
 443     }
 444 }
 445
 446 /*
 447 TYPEDEF
 448         arelent_chain
 449
 450 DESCRIPTION
 451
 452         How relocs are tied together in an <<asection>>:
 453
 454 .typedef struct relent_chain
 455 .{
 456 .  arelent relent;
 457 .  struct relent_chain *next;
 458 .}
 459 .arelent_chain;
 460 .
 461 */
 462
 463 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 464 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 465
 466 /*
 467 FUNCTION
 468         bfd_check_overflow
 469
 470 SYNOPSIS
 471         bfd_reloc_status_type bfd_check_overflow
 472           (enum complain_overflow how,
 473            unsigned int bitsize,
 474            unsigned int rightshift,
 475            unsigned int addrsize,
 476            bfd_vma relocation);
 477
 478 DESCRIPTION
 479         Perform overflow checking on @var{relocation} which has
 480         @var{bitsize} significant bits and will be shifted right by
 481         @var{rightshift} bits, on a machine with addresses containing
 482         @var{addrsize} significant bits.  The result is either of
 483         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 484
 485 */
 486
 487 bfd_reloc_status_type
 488 bfd_check_overflow (enum complain_overflow how,
 489                     unsigned int bitsize,
 490                     unsigned int rightshift,
 491                     unsigned int addrsize,
 492                     bfd_vma relocation)
 493 {
 494   bfd_vma fieldmask, addrmask, signmask, ss, a;
 495   bfd_reloc_status_type flag = bfd_reloc_ok;
 496
 497   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 498      we'll be permissive: extra bits in the field mask will
 499      automatically extend the address mask for purposes of the
 500      overflow check.  */
 501   fieldmask = N_ONES (bitsize);
 502   signmask = ~fieldmask;
 503   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 504   a = (relocation & addrmask) >> rightshift;
 505
 506   switch (how)
 507     {
 508     case complain_overflow_dont:
 509       break;
 510
 511     case complain_overflow_signed:
 512       /* If any sign bits are set, all sign bits must be set.  That
 513          is, A must be a valid negative address after shifting.  */
 514       signmask = ~ (fieldmask >> 1);
 515       /* Fall thru */
 516
 517     case complain_overflow_bitfield:
 518       /* Bitfields are sometimes signed, sometimes unsigned.  We
 519          explicitly allow an address wrap too, which means a bitfield
 520          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 521          if the value has some, but not all, bits set outside the
 522          field.  */
 523       ss = a & signmask;
 524       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 525         flag = bfd_reloc_overflow;
 526       break;
 527
 528     case complain_overflow_unsigned:
 529       /* We have an overflow if the address does not fit in the field.  */
 530       if ((a & signmask) != 0)
 531         flag = bfd_reloc_overflow;
 532       break;
 533
 534     default:
 535       abort ();
 536     }
 537
 538   return flag;
 539 }
 540
 541 /*
 542 FUNCTION
 543         bfd_perform_relocation
 544
 545 SYNOPSIS
 546         bfd_reloc_status_type bfd_perform_relocation
 547           (bfd *abfd,
 548            arelent *reloc_entry,
 549            void *data,
 550            asection *input_section,
 551            bfd *output_bfd,
 552            char **error_message);
 553
 554 DESCRIPTION
 555         If @var{output_bfd} is supplied to this function, the
 556         generated image will be relocatable; the relocations are
 557         copied to the output file after they have been changed to
 558         reflect the new state of the world. There are two ways of
 559         reflecting the results of partial linkage in an output file:
 560         by modifying the output data in place, and by modifying the
 561         relocation record.  Some native formats (e.g., basic a.out and
 562         basic coff) have no way of specifying an addend in the
 563         relocation type, so the addend has to go in the output data.
 564         This is no big deal since in these formats the output data
 565         slot will always be big enough for the addend. Complex reloc
 566         types with addends were invented to solve just this problem.
 567         The @var{error_message} argument is set to an error message if
 568         this return @code{bfd_reloc_dangerous}.
 569
 570 */
 571
 572 bfd_reloc_status_type
 573 bfd_perform_relocation (bfd *abfd,
 574                         arelent *reloc_entry,
 575                         void *data,
 576                         asection *input_section,
 577                         bfd *output_bfd,
 578                         char **error_message)
 579 {
 580   bfd_vma relocation;
 581   bfd_reloc_status_type flag = bfd_reloc_ok;
 582   bfd_size_type octets;
 583   bfd_vma output_base = 0;
 584   reloc_howto_type *howto = reloc_entry->howto;
 585   asection *reloc_target_output_section;
 586   asymbol *symbol;
 587
 588   symbol = *(reloc_entry->sym_ptr_ptr);
 589
 590   /* If we are not producing relocatable output, return an error if
 591      the symbol is not defined.  An undefined weak symbol is
 592      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 593   if (bfd_is_und_section (symbol->section)
 594       && (symbol->flags & BSF_WEAK) == 0
 595       && output_bfd == NULL)
 596     flag = bfd_reloc_undefined;
 597
 598   /* If there is a function supplied to handle this relocation type,
 599      call it.  It'll return `bfd_reloc_continue' if further processing
 600      can be done.  */
 601   if (howto && howto->special_function)
 602     {
 603       bfd_reloc_status_type cont;
 604       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 605                                       input_section, output_bfd,
 606                                       error_message);
 607       if (cont != bfd_reloc_continue)
 608         return cont;
 609     }
 610
 611   if (bfd_is_abs_section (symbol->section)
 612       && output_bfd != NULL)
 613     {
 614       reloc_entry->address += input_section->output_offset;
 615       return bfd_reloc_ok;
 616     }
 617
 618   /* PR 17512: file: 0f67f69d.  */
 619   if (howto == NULL)
 620     return bfd_reloc_undefined;
 621
 622   /* Is the address of the relocation really within the section?
 623      Include the size of the reloc in the test for out of range addresses.
 624      PR 17512: file: c146ab8b, 46dff27f, 38e53ebf.  */
 625   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 626   if (octets + bfd_get_reloc_size (howto)
 627       > bfd_get_section_limit_octets (abfd, input_section))
 628     return bfd_reloc_outofrange;
 629
 630   /* Work out which section the relocation is targeted at and the
 631      initial relocation command value.  */
 632
 633   /* Get symbol value.  (Common symbols are special.)  */
 634   if (bfd_is_com_section (symbol->section))
 635     relocation = 0;
 636   else
 637     relocation = symbol->value;
 638
 639   reloc_target_output_section = symbol->section->output_section;
 640
 641   /* Convert input-section-relative symbol value to absolute.  */
 642   if ((output_bfd && ! howto->partial_inplace)
 643       || reloc_target_output_section == NULL)
 644     output_base = 0;
 645   else
 646     output_base = reloc_target_output_section->vma;
 647
 648   relocation += output_base + symbol->section->output_offset;
 649
 650   /* Add in supplied addend.  */
 651   relocation += reloc_entry->addend;
 652
 653   /* Here the variable relocation holds the final address of the
 654      symbol we are relocating against, plus any addend.  */
 655
 656   if (howto->pc_relative)
 657     {
 658       /* This is a PC relative relocation.  We want to set RELOCATION
 659          to the distance between the address of the symbol and the
 660          location.  RELOCATION is already the address of the symbol.
 661
 662          We start by subtracting the address of the section containing
 663          the location.
 664
 665          If pcrel_offset is set, we must further subtract the position
 666          of the location within the section.  Some targets arrange for
 667          the addend to be the negative of the position of the location
 668          within the section; for example, i386-aout does this.  For
 669          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 670          include the position of the location; for example, m88kbcs,
 671          or ELF.  For those targets, pcrel_offset is TRUE.
 672
 673          If we are producing relocatable output, then we must ensure
 674          that this reloc will be correctly computed when the final
 675          relocation is done.  If pcrel_offset is FALSE we want to wind
 676          up with the negative of the location within the section,
 677          which means we must adjust the existing addend by the change
 678          in the location within the section.  If pcrel_offset is TRUE
 679          we do not want to adjust the existing addend at all.
 680
 681          FIXME: This seems logical to me, but for the case of
 682          producing relocatable output it is not what the code
 683          actually does.  I don't want to change it, because it seems
 684          far too likely that something will break.  */
 685
 686       relocation -=
 687         input_section->output_section->vma + input_section->output_offset;
 688
 689       if (howto->pcrel_offset)
 690         relocation -= reloc_entry->address;
 691     }
 692
 693   if (output_bfd != NULL)
 694     {
 695       if (! howto->partial_inplace)
 696         {
 697           /* This is a partial relocation, and we want to apply the relocation
 698              to the reloc entry rather than the raw data. Modify the reloc
 699              inplace to reflect what we now know.  */
 700           reloc_entry->addend = relocation;
 701           reloc_entry->address += input_section->output_offset;
 702           return flag;
 703         }
 704       else
 705         {
 706           /* This is a partial relocation, but inplace, so modify the
 707              reloc record a bit.
 708
 709              If we've relocated with a symbol with a section, change
 710              into a ref to the section belonging to the symbol.  */
 711
 712           reloc_entry->address += input_section->output_offset;
 713
 714           /* WTF?? */
 715           if (abfd->xvec->flavour == bfd_target_coff_flavour
 716               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 717               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 718             {
 719               /* For m68k-coff, the addend was being subtracted twice during
 720                  relocation with -r.  Removing the line below this comment
 721                  fixes that problem; see PR 2953.
 722
 723 However, Ian wrote the following, regarding removing the line below,
 724 which explains why it is still enabled:  --djm
 725
 726 If you put a patch like that into BFD you need to check all the COFF
 727 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 728 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 729 problem in a different way.  There may very well be a reason that the
 730 code works as it does.
 731
 732 Hmmm.  The first obvious point is that bfd_perform_relocation should
 733 not have any tests that depend upon the flavour.  It's seem like
 734 entirely the wrong place for such a thing.  The second obvious point
 735 is that the current code ignores the reloc addend when producing
 736 relocatable output for COFF.  That's peculiar.  In fact, I really
 737 have no idea what the point of the line you want to remove is.
 738
 739 A typical COFF reloc subtracts the old value of the symbol and adds in
 740 the new value to the location in the object file (if it's a pc
 741 relative reloc it adds the difference between the symbol value and the
 742 location).  When relocating we need to preserve that property.
 743
 744 BFD handles this by setting the addend to the negative of the old
 745 value of the symbol.  Unfortunately it handles common symbols in a
 746 non-standard way (it doesn't subtract the old value) but that's a
 747 different story (we can't change it without losing backward
 748 compatibility with old object files) (coff-i386 does subtract the old
 749 value, to be compatible with existing coff-i386 targets, like SCO).
 750
 751 So everything works fine when not producing relocatable output.  When
 752 we are producing relocatable output, logically we should do exactly
 753 what we do when not producing relocatable output.  Therefore, your
 754 patch is correct.  In fact, it should probably always just set
 755 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 756 add the value into the object file.  This won't hurt the COFF code,
 757 which doesn't use the addend; I'm not sure what it will do to other
 758 formats (the thing to check for would be whether any formats both use
 759 the addend and set partial_inplace).
 760
 761 When I wanted to make coff-i386 produce relocatable output, I ran
 762 into the problem that you are running into: I wanted to remove that
 763 line.  Rather than risk it, I made the coff-i386 relocs use a special
 764 function; it's coff_i386_reloc in coff-i386.c.  The function
 765 specifically adds the addend field into the object file, knowing that
 766 bfd_perform_relocation is not going to.  If you remove that line, then
 767 coff-i386.c will wind up adding the addend field in twice.  It's
 768 trivial to fix; it just needs to be done.
 769
 770 The problem with removing the line is just that it may break some
 771 working code.  With BFD it's hard to be sure of anything.  The right
 772 way to deal with this is simply to build and test at least all the
 773 supported COFF targets.  It should be straightforward if time and disk
 774 space consuming.  For each target:
 775     1) build the linker
 776     2) generate some executable, and link it using -r (I would
 777        probably use paranoia.o and link against newlib/libc.a, which
 778        for all the supported targets would be available in
 779        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 780     3) make the change to reloc.c
 781     4) rebuild the linker
 782     5) repeat step 2
 783     6) if the resulting object files are the same, you have at least
 784        made it no worse
 785     7) if they are different you have to figure out which version is
 786        right
 787 */
 788               relocation -= reloc_entry->addend;
 789               reloc_entry->addend = 0;
 790             }
 791           else
 792             {
 793               reloc_entry->addend = relocation;
 794             }
 795         }
 796     }
 797
 798   /* FIXME: This overflow checking is incomplete, because the value
 799      might have overflowed before we get here.  For a correct check we
 800      need to compute the value in a size larger than bitsize, but we
 801      can't reasonably do that for a reloc the same size as a host
 802      machine word.
 803      FIXME: We should also do overflow checking on the result after
 804      adding in the value contained in the object file.  */
 805   if (howto->complain_on_overflow != complain_overflow_dont
 806       && flag == bfd_reloc_ok)
 807     flag = bfd_check_overflow (howto->complain_on_overflow,
 808                                howto->bitsize,
 809                                howto->rightshift,
 810                                bfd_arch_bits_per_address (abfd),
 811                                relocation);
 812
 813   /* Either we are relocating all the way, or we don't want to apply
 814      the relocation to the reloc entry (probably because there isn't
 815      any room in the output format to describe addends to relocs).  */
 816
 817   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 818      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 819      following program:
 820
 821      struct str
 822      {
 823        unsigned int i0;
 824      } s = { 0 };
 825
 826      int
 827      main ()
 828      {
 829        unsigned long x;
 830
 831        x = 0x100000000;
 832        x <<= (unsigned long) s.i0;
 833        if (x == 0)
 834          printf ("failed\n");
 835        else
 836          printf ("succeeded (%lx)\n", x);
 837      }
 838      */
 839
 840   relocation >>= (bfd_vma) howto->rightshift;
 841
 842   /* Shift everything up to where it's going to be used.  */
 843   relocation <<= (bfd_vma) howto->bitpos;
 844
 845   /* Wait for the day when all have the mask in them.  */
 846
 847   /* What we do:
 848      i instruction to be left alone
 849      o offset within instruction
 850      r relocation offset to apply
 851      S src mask
 852      D dst mask
 853      N ~dst mask
 854      A part 1
 855      B part 2
 856      R result
 857
 858      Do this:
 859      ((  i i i i i o o o o o  from bfd_get<size>
 860      and           S S S S S) to get the size offset we want
 861      +   r r r r r r r r r r) to get the final value to place
 862      and           D D D D D  to chop to right size
 863      -----------------------
 864      =             A A A A A
 865      And this:
 866      (   i i i i i o o o o o  from bfd_get<size>
 867      and N N N N N          ) get instruction
 868      -----------------------
 869      =   B B B B B
 870
 871      And then:
 872      (   B B B B B
 873      or            A A A A A)
 874      -----------------------
 875      =   R R R R R R R R R R  put into bfd_put<size>
 876      */
 877
 878 #define DOIT(x) \
 879   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 880
 881   switch (howto->size)
 882     {
 883     case 0:
 884       {
 885         char x = bfd_get_8 (abfd, (char *) data + octets);
 886         DOIT (x);
 887         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 888       }
 889       break;
 890
 891     case 1:
 892       {
 893         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 894         DOIT (x);
 895         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 896       }
 897       break;
 898     case 2:
 899       {
 900         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 901         DOIT (x);
 902         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 903       }
 904       break;
 905     case -2:
 906       {
 907         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 908         relocation = -relocation;
 909         DOIT (x);
 910         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 911       }
 912       break;
 913
 914     case -1:
 915       {
 916         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 917         relocation = -relocation;
 918         DOIT (x);
 919         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 920       }
 921       break;
 922
 923     case 3:
 924       /* Do nothing */
 925       break;
 926
 927     case 4:
 928 #ifdef BFD64
 929       {
 930         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 931         DOIT (x);
 932         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 933       }
 934 #else
 935       abort ();
 936 #endif
 937       break;
 938     default:
 939       return bfd_reloc_other;
 940     }
 941
 942   return flag;
 943 }
 944
 945 /*
 946 FUNCTION
 947         bfd_install_relocation
 948
 949 SYNOPSIS
 950         bfd_reloc_status_type bfd_install_relocation
 951           (bfd *abfd,
 952            arelent *reloc_entry,
 953            void *data, bfd_vma data_start,
 954            asection *input_section,
 955            char **error_message);
 956
 957 DESCRIPTION
 958         This looks remarkably like <<bfd_perform_relocation>>, except it
 959         does not expect that the section contents have been filled in.
 960         I.e., it's suitable for use when creating, rather than applying
 961         a relocation.
 962
 963         For now, this function should be considered reserved for the
 964         assembler.
 965 */
 966
 967 bfd_reloc_status_type
 968 bfd_install_relocation (bfd *abfd,
 969                         arelent *reloc_entry,
 970                         void *data_start,
 971                         bfd_vma data_start_offset,
 972                         asection *input_section,
 973                         char **error_message)
 974 {
 975   bfd_vma relocation;
 976   bfd_reloc_status_type flag = bfd_reloc_ok;
 977   bfd_size_type octets;
 978   bfd_vma output_base = 0;
 979   reloc_howto_type *howto = reloc_entry->howto;
 980   asection *reloc_target_output_section;
 981   asymbol *symbol;
 982   bfd_byte *data;
 983
 984   symbol = *(reloc_entry->sym_ptr_ptr);
 985
 986   /* If there is a function supplied to handle this relocation type,
 987      call it.  It'll return `bfd_reloc_continue' if further processing
 988      can be done.  */
 989   if (howto && howto->special_function)
 990     {
 991       bfd_reloc_status_type cont;
 992
 993       /* XXX - The special_function calls haven't been fixed up to deal
 994          with creating new relocations and section contents.  */
 995       cont = howto->special_function (abfd, reloc_entry, symbol,
 996                                       /* XXX - Non-portable! */
 997                                       ((bfd_byte *) data_start
 998                                        - data_start_offset),
 999                                       input_section, abfd, error_message);
1000       if (cont != bfd_reloc_continue)
1001         return cont;
1002     }
1003
1004   if (bfd_is_abs_section (symbol->section))
1005     {
1006       reloc_entry->address += input_section->output_offset;
1007       return bfd_reloc_ok;
1008     }
1009
1010   /* No need to check for howto != NULL if !bfd_is_abs_section as
1011      it will have been checked in `bfd_perform_relocation already'.  */
1012
1013   /* Is the address of the relocation really within the section?  */
1014   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
1015   if (octets + bfd_get_reloc_size (howto)
1016       > bfd_get_section_limit_octets (abfd, input_section))
1017     return bfd_reloc_outofrange;
1018
1019   /* Work out which section the relocation is targeted at and the
1020      initial relocation command value.  */
1021
1022   /* Get symbol value.  (Common symbols are special.)  */
1023   if (bfd_is_com_section (symbol->section))
1024     relocation = 0;
1025   else
1026     relocation = symbol->value;
1027
1028   reloc_target_output_section = symbol->section->output_section;
1029
1030   /* Convert input-section-relative symbol value to absolute.  */
1031   if (! howto->partial_inplace)
1032     output_base = 0;
1033   else
1034     output_base = reloc_target_output_section->vma;
1035
1036   relocation += output_base + symbol->section->output_offset;
1037
1038   /* Add in supplied addend.  */
1039   relocation += reloc_entry->addend;
1040
1041   /* Here the variable relocation holds the final address of the
1042      symbol we are relocating against, plus any addend.  */
1043
1044   if (howto->pc_relative)
1045     {
1046       /* This is a PC relative relocation.  We want to set RELOCATION
1047          to the distance between the address of the symbol and the
1048          location.  RELOCATION is already the address of the symbol.
1049
1050          We start by subtracting the address of the section containing
1051          the location.
1052
1053          If pcrel_offset is set, we must further subtract the position
1054          of the location within the section.  Some targets arrange for
1055          the addend to be the negative of the position of the location
1056          within the section; for example, i386-aout does this.  For
1057          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1058          include the position of the location; for example, m88kbcs,
1059          or ELF.  For those targets, pcrel_offset is TRUE.
1060
1061          If we are producing relocatable output, then we must ensure
1062          that this reloc will be correctly computed when the final
1063          relocation is done.  If pcrel_offset is FALSE we want to wind
1064          up with the negative of the location within the section,
1065          which means we must adjust the existing addend by the change
1066          in the location within the section.  If pcrel_offset is TRUE
1067          we do not want to adjust the existing addend at all.
1068
1069          FIXME: This seems logical to me, but for the case of
1070          producing relocatable output it is not what the code
1071          actually does.  I don't want to change it, because it seems
1072          far too likely that something will break.  */
1073
1074       relocation -=
1075         input_section->output_section->vma + input_section->output_offset;
1076
1077       if (howto->pcrel_offset && howto->partial_inplace)
1078         relocation -= reloc_entry->address;
1079     }
1080
1081   if (! howto->partial_inplace)
1082     {
1083       /* This is a partial relocation, and we want to apply the relocation
1084          to the reloc entry rather than the raw data. Modify the reloc
1085          inplace to reflect what we now know.  */
1086       reloc_entry->addend = relocation;
1087       reloc_entry->address += input_section->output_offset;
1088       return flag;
1089     }
1090   else
1091     {
1092       /* This is a partial relocation, but inplace, so modify the
1093          reloc record a bit.
1094
1095          If we've relocated with a symbol with a section, change
1096          into a ref to the section belonging to the symbol.  */
1097       reloc_entry->address += input_section->output_offset;
1098
1099       /* WTF?? */
1100       if (abfd->xvec->flavour == bfd_target_coff_flavour
1101           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1102           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1103         {
1104
1105           /* For m68k-coff, the addend was being subtracted twice during
1106              relocation with -r.  Removing the line below this comment
1107              fixes that problem; see PR 2953.
1108
1109 However, Ian wrote the following, regarding removing the line below,
1110 which explains why it is still enabled:  --djm
1111
1112 If you put a patch like that into BFD you need to check all the COFF
1113 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1114 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1115 problem in a different way.  There may very well be a reason that the
1116 code works as it does.
1117
1118 Hmmm.  The first obvious point is that bfd_install_relocation should
1119 not have any tests that depend upon the flavour.  It's seem like
1120 entirely the wrong place for such a thing.  The second obvious point
1121 is that the current code ignores the reloc addend when producing
1122 relocatable output for COFF.  That's peculiar.  In fact, I really
1123 have no idea what the point of the line you want to remove is.
1124
1125 A typical COFF reloc subtracts the old value of the symbol and adds in
1126 the new value to the location in the object file (if it's a pc
1127 relative reloc it adds the difference between the symbol value and the
1128 location).  When relocating we need to preserve that property.
1129
1130 BFD handles this by setting the addend to the negative of the old
1131 value of the symbol.  Unfortunately it handles common symbols in a
1132 non-standard way (it doesn't subtract the old value) but that's a
1133 different story (we can't change it without losing backward
1134 compatibility with old object files) (coff-i386 does subtract the old
1135 value, to be compatible with existing coff-i386 targets, like SCO).
1136
1137 So everything works fine when not producing relocatable output.  When
1138 we are producing relocatable output, logically we should do exactly
1139 what we do when not producing relocatable output.  Therefore, your
1140 patch is correct.  In fact, it should probably always just set
1141 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1142 add the value into the object file.  This won't hurt the COFF code,
1143 which doesn't use the addend; I'm not sure what it will do to other
1144 formats (the thing to check for would be whether any formats both use
1145 the addend and set partial_inplace).
1146
1147 When I wanted to make coff-i386 produce relocatable output, I ran
1148 into the problem that you are running into: I wanted to remove that
1149 line.  Rather than risk it, I made the coff-i386 relocs use a special
1150 function; it's coff_i386_reloc in coff-i386.c.  The function
1151 specifically adds the addend field into the object file, knowing that
1152 bfd_install_relocation is not going to.  If you remove that line, then
1153 coff-i386.c will wind up adding the addend field in twice.  It's
1154 trivial to fix; it just needs to be done.
1155
1156 The problem with removing the line is just that it may break some
1157 working code.  With BFD it's hard to be sure of anything.  The right
1158 way to deal with this is simply to build and test at least all the
1159 supported COFF targets.  It should be straightforward if time and disk
1160 space consuming.  For each target:
1161     1) build the linker
1162     2) generate some executable, and link it using -r (I would
1163        probably use paranoia.o and link against newlib/libc.a, which
1164        for all the supported targets would be available in
1165        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1166     3) make the change to reloc.c
1167     4) rebuild the linker
1168     5) repeat step 2
1169     6) if the resulting object files are the same, you have at least
1170        made it no worse
1171     7) if they are different you have to figure out which version is
1172        right.  */
1173           relocation -= reloc_entry->addend;
1174           /* FIXME: There should be no target specific code here...  */
1175           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1176             reloc_entry->addend = 0;
1177         }
1178       else
1179         {
1180           reloc_entry->addend = relocation;
1181         }
1182     }
1183
1184   /* FIXME: This overflow checking is incomplete, because the value
1185      might have overflowed before we get here.  For a correct check we
1186      need to compute the value in a size larger than bitsize, but we
1187      can't reasonably do that for a reloc the same size as a host
1188      machine word.
1189      FIXME: We should also do overflow checking on the result after
1190      adding in the value contained in the object file.  */
1191   if (howto->complain_on_overflow != complain_overflow_dont)
1192     flag = bfd_check_overflow (howto->complain_on_overflow,
1193                                howto->bitsize,
1194                                howto->rightshift,
1195                                bfd_arch_bits_per_address (abfd),
1196                                relocation);
1197
1198   /* Either we are relocating all the way, or we don't want to apply
1199      the relocation to the reloc entry (probably because there isn't
1200      any room in the output format to describe addends to relocs).  */
1201
1202   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1203      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1204      following program:
1205
1206      struct str
1207      {
1208        unsigned int i0;
1209      } s = { 0 };
1210
1211      int
1212      main ()
1213      {
1214        unsigned long x;
1215
1216        x = 0x100000000;
1217        x <<= (unsigned long) s.i0;
1218        if (x == 0)
1219          printf ("failed\n");
1220        else
1221          printf ("succeeded (%lx)\n", x);
1222      }
1223      */
1224
1225   relocation >>= (bfd_vma) howto->rightshift;
1226
1227   /* Shift everything up to where it's going to be used.  */
1228   relocation <<= (bfd_vma) howto->bitpos;
1229
1230   /* Wait for the day when all have the mask in them.  */
1231
1232   /* What we do:
1233      i instruction to be left alone
1234      o offset within instruction
1235      r relocation offset to apply
1236      S src mask
1237      D dst mask
1238      N ~dst mask
1239      A part 1
1240      B part 2
1241      R result
1242
1243      Do this:
1244      ((  i i i i i o o o o o  from bfd_get<size>
1245      and           S S S S S) to get the size offset we want
1246      +   r r r r r r r r r r) to get the final value to place
1247      and           D D D D D  to chop to right size
1248      -----------------------
1249      =             A A A A A
1250      And this:
1251      (   i i i i i o o o o o  from bfd_get<size>
1252      and N N N N N          ) get instruction
1253      -----------------------
1254      =   B B B B B
1255
1256      And then:
1257      (   B B B B B
1258      or            A A A A A)
1259      -----------------------
1260      =   R R R R R R R R R R  put into bfd_put<size>
1261      */
1262
1263 #define DOIT(x) \
1264   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1265
1266   data = (bfd_byte *) data_start + (octets - data_start_offset);
1267
1268   switch (howto->size)
1269     {
1270     case 0:
1271       {
1272         char x = bfd_get_8 (abfd, data);
1273         DOIT (x);
1274         bfd_put_8 (abfd, x, data);
1275       }
1276       break;
1277
1278     case 1:
1279       {
1280         short x = bfd_get_16 (abfd, data);
1281         DOIT (x);
1282         bfd_put_16 (abfd, (bfd_vma) x, data);
1283       }
1284       break;
1285     case 2:
1286       {
1287         long x = bfd_get_32 (abfd, data);
1288         DOIT (x);
1289         bfd_put_32 (abfd, (bfd_vma) x, data);
1290       }
1291       break;
1292     case -2:
1293       {
1294         long x = bfd_get_32 (abfd, data);
1295         relocation = -relocation;
1296         DOIT (x);
1297         bfd_put_32 (abfd, (bfd_vma) x, data);
1298       }
1299       break;
1300
1301     case 3:
1302       /* Do nothing */
1303       break;
1304
1305     case 4:
1306       {
1307         bfd_vma x = bfd_get_64 (abfd, data);
1308         DOIT (x);
1309         bfd_put_64 (abfd, x, data);
1310       }
1311       break;
1312     default:
1313       return bfd_reloc_other;
1314     }
1315
1316   return flag;
1317 }
1318
1319 /* This relocation routine is used by some of the backend linkers.
1320    They do not construct asymbol or arelent structures, so there is no
1321    reason for them to use bfd_perform_relocation.  Also,
1322    bfd_perform_relocation is so hacked up it is easier to write a new
1323    function than to try to deal with it.
1324
1325    This routine does a final relocation.  Whether it is useful for a
1326    relocatable link depends upon how the object format defines
1327    relocations.
1328
1329    FIXME: This routine ignores any special_function in the HOWTO,
1330    since the existing special_function values have been written for
1331    bfd_perform_relocation.
1332
1333    HOWTO is the reloc howto information.
1334    INPUT_BFD is the BFD which the reloc applies to.
1335    INPUT_SECTION is the section which the reloc applies to.
1336    CONTENTS is the contents of the section.
1337    ADDRESS is the address of the reloc within INPUT_SECTION.
1338    VALUE is the value of the symbol the reloc refers to.
1339    ADDEND is the addend of the reloc.  */
1340
1341 bfd_reloc_status_type
1342 _bfd_final_link_relocate (reloc_howto_type *howto,
1343                           bfd *input_bfd,
1344                           asection *input_section,
1345                           bfd_byte *contents,
1346                           bfd_vma address,
1347                           bfd_vma value,
1348                           bfd_vma addend)
1349 {
1350   bfd_vma relocation;
1351   bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
1352
1353   /* Sanity check the address.  */
1354   if (octets + bfd_get_reloc_size (howto)
1355       > bfd_get_section_limit_octets (input_bfd, input_section))
1356     return bfd_reloc_outofrange;
1357
1358   /* This function assumes that we are dealing with a basic relocation
1359      against a symbol.  We want to compute the value of the symbol to
1360      relocate to.  This is just VALUE, the value of the symbol, plus
1361      ADDEND, any addend associated with the reloc.  */
1362   relocation = value + addend;
1363
1364   /* If the relocation is PC relative, we want to set RELOCATION to
1365      the distance between the symbol (currently in RELOCATION) and the
1366      location we are relocating.  Some targets (e.g., i386-aout)
1367      arrange for the contents of the section to be the negative of the
1368      offset of the location within the section; for such targets
1369      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1370      simply leave the contents of the section as zero; for such
1371      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1372      need to subtract out the offset of the location within the
1373      section (which is just ADDRESS).  */
1374   if (howto->pc_relative)
1375     {
1376       relocation -= (input_section->output_section->vma
1377                      + input_section->output_offset);
1378       if (howto->pcrel_offset)
1379         relocation -= address;
1380     }
1381
1382   return _bfd_relocate_contents (howto, input_bfd, relocation,
1383                                  contents
1384                                  + address * bfd_octets_per_byte (input_bfd));
1385 }
1386
1387 /* Relocate a given location using a given value and howto.  */
1388
1389 bfd_reloc_status_type
1390 _bfd_relocate_contents (reloc_howto_type *howto,
1391                         bfd *input_bfd,
1392                         bfd_vma relocation,
1393                         bfd_byte *location)
1394 {
1395   int size;
1396   bfd_vma x = 0;
1397   bfd_reloc_status_type flag;
1398   unsigned int rightshift = howto->rightshift;
1399   unsigned int bitpos = howto->bitpos;
1400
1401   /* If the size is negative, negate RELOCATION.  This isn't very
1402      general.  */
1403   if (howto->size < 0)
1404     relocation = -relocation;
1405
1406   /* Get the value we are going to relocate.  */
1407   size = bfd_get_reloc_size (howto);
1408   switch (size)
1409     {
1410     default:
1411       abort ();
1412     case 0:
1413       return bfd_reloc_ok;
1414     case 1:
1415       x = bfd_get_8 (input_bfd, location);
1416       break;
1417     case 2:
1418       x = bfd_get_16 (input_bfd, location);
1419       break;
1420     case 4:
1421       x = bfd_get_32 (input_bfd, location);
1422       break;
1423     case 8:
1424 #ifdef BFD64
1425       x = bfd_get_64 (input_bfd, location);
1426 #else
1427       abort ();
1428 #endif
1429       break;
1430     }
1431
1432   /* Check for overflow.  FIXME: We may drop bits during the addition
1433      which we don't check for.  We must either check at every single
1434      operation, which would be tedious, or we must do the computations
1435      in a type larger than bfd_vma, which would be inefficient.  */
1436   flag = bfd_reloc_ok;
1437   if (howto->complain_on_overflow != complain_overflow_dont)
1438     {
1439       bfd_vma addrmask, fieldmask, signmask, ss;
1440       bfd_vma a, b, sum;
1441
1442       /* Get the values to be added together.  For signed and unsigned
1443          relocations, we assume that all values should be truncated to
1444          the size of an address.  For bitfields, all the bits matter.
1445          See also bfd_check_overflow.  */
1446       fieldmask = N_ONES (howto->bitsize);
1447       signmask = ~fieldmask;
1448       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1449                   | (fieldmask << rightshift));
1450       a = (relocation & addrmask) >> rightshift;
1451       b = (x & howto->src_mask & addrmask) >> bitpos;
1452       addrmask >>= rightshift;
1453
1454       switch (howto->complain_on_overflow)
1455         {
1456         case complain_overflow_signed:
1457           /* If any sign bits are set, all sign bits must be set.
1458              That is, A must be a valid negative address after
1459              shifting.  */
1460           signmask = ~(fieldmask >> 1);
1461           /* Fall thru */
1462
1463         case complain_overflow_bitfield:
1464           /* Much like the signed check, but for a field one bit
1465              wider.  We allow a bitfield to represent numbers in the
1466              range -2**n to 2**n-1, where n is the number of bits in the
1467              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1468              can't overflow, which is exactly what we want.  */
1469           ss = a & signmask;
1470           if (ss != 0 && ss != (addrmask & signmask))
1471             flag = bfd_reloc_overflow;
1472
1473           /* We only need this next bit of code if the sign bit of B
1474              is below the sign bit of A.  This would only happen if
1475              SRC_MASK had fewer bits than BITSIZE.  Note that if
1476              SRC_MASK has more bits than BITSIZE, we can get into
1477              trouble; we would need to verify that B is in range, as
1478              we do for A above.  */
1479           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1480           ss >>= bitpos;
1481
1482           /* Set all the bits above the sign bit.  */
1483           b = (b ^ ss) - ss;
1484
1485           /* Now we can do the addition.  */
1486           sum = a + b;
1487
1488           /* See if the result has the correct sign.  Bits above the
1489              sign bit are junk now; ignore them.  If the sum is
1490              positive, make sure we did not have all negative inputs;
1491              if the sum is negative, make sure we did not have all
1492              positive inputs.  The test below looks only at the sign
1493              bits, and it really just
1494                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1495
1496              We mask with addrmask here to explicitly allow an address
1497              wrap-around.  The Linux kernel relies on it, and it is
1498              the only way to write assembler code which can run when
1499              loaded at a location 0x80000000 away from the location at
1500              which it is linked.  */
1501           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1502             flag = bfd_reloc_overflow;
1503           break;
1504
1505         case complain_overflow_unsigned:
1506           /* Checking for an unsigned overflow is relatively easy:
1507              trim the addresses and add, and trim the result as well.
1508              Overflow is normally indicated when the result does not
1509              fit in the field.  However, we also need to consider the
1510              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1511              input is 0x80000000, and bfd_vma is only 32 bits; then we
1512              will get sum == 0, but there is an overflow, since the
1513              inputs did not fit in the field.  Instead of doing a
1514              separate test, we can check for this by or-ing in the
1515              operands when testing for the sum overflowing its final
1516              field.  */
1517           sum = (a + b) & addrmask;
1518           if ((a | b | sum) & signmask)
1519             flag = bfd_reloc_overflow;
1520           break;
1521
1522         default:
1523           abort ();
1524         }
1525     }
1526
1527   /* Put RELOCATION in the right bits.  */
1528   relocation >>= (bfd_vma) rightshift;
1529   relocation <<= (bfd_vma) bitpos;
1530
1531   /* Add RELOCATION to the right bits of X.  */
1532   x = ((x & ~howto->dst_mask)
1533        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1534
1535   /* Put the relocated value back in the object file.  */
1536   switch (size)
1537     {
1538     default:
1539       abort ();
1540     case 1:
1541       bfd_put_8 (input_bfd, x, location);
1542       break;
1543     case 2:
1544       bfd_put_16 (input_bfd, x, location);
1545       break;
1546     case 4:
1547       bfd_put_32 (input_bfd, x, location);
1548       break;
1549     case 8:
1550 #ifdef BFD64
1551       bfd_put_64 (input_bfd, x, location);
1552 #else
1553       abort ();
1554 #endif
1555       break;
1556     }
1557
1558   return flag;
1559 }
1560
1561 /* Clear a given location using a given howto, by applying a fixed relocation
1562    value and discarding any in-place addend.  This is used for fixed-up
1563    relocations against discarded symbols, to make ignorable debug or unwind
1564    information more obvious.  */
1565
1566 void
1567 _bfd_clear_contents (reloc_howto_type *howto,
1568                      bfd *input_bfd,
1569                      asection *input_section,
1570                      bfd_byte *location)
1571 {
1572   int size;
1573   bfd_vma x = 0;
1574
1575   /* Get the value we are going to relocate.  */
1576   size = bfd_get_reloc_size (howto);
1577   switch (size)
1578     {
1579     default:
1580       abort ();
1581     case 0:
1582       return;
1583     case 1:
1584       x = bfd_get_8 (input_bfd, location);
1585       break;
1586     case 2:
1587       x = bfd_get_16 (input_bfd, location);
1588       break;
1589     case 4:
1590       x = bfd_get_32 (input_bfd, location);
1591       break;
1592     case 8:
1593 #ifdef BFD64
1594       x = bfd_get_64 (input_bfd, location);
1595 #else
1596       abort ();
1597 #endif
1598       break;
1599     }
1600
1601   /* Zero out the unwanted bits of X.  */
1602   x &= ~howto->dst_mask;
1603
1604   /* For a range list, use 1 instead of 0 as placeholder.  0
1605      would terminate the list, hiding any later entries.  */
1606   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1607               ".debug_ranges") == 0
1608       && (howto->dst_mask & 1) != 0)
1609     x |= 1;
1610
1611   /* Put the relocated value back in the object file.  */
1612   switch (size)
1613     {
1614     default:
1615     case 0:
1616       abort ();
1617     case 1:
1618       bfd_put_8 (input_bfd, x, location);
1619       break;
1620     case 2:
1621       bfd_put_16 (input_bfd, x, location);
1622       break;
1623     case 4:
1624       bfd_put_32 (input_bfd, x, location);
1625       break;
1626     case 8:
1627 #ifdef BFD64
1628       bfd_put_64 (input_bfd, x, location);
1629 #else
1630       abort ();
1631 #endif
1632       break;
1633     }
1634 }
1635
1636 /*
1637 DOCDD
1638 INODE
1639         howto manager,  , typedef arelent, Relocations
1640
1641 SUBSECTION
1642         The howto manager
1643
1644         When an application wants to create a relocation, but doesn't
1645         know what the target machine might call it, it can find out by
1646         using this bit of code.
1647
1648 */
1649
1650 /*
1651 TYPEDEF
1652         bfd_reloc_code_type
1653
1654 DESCRIPTION
1655         The insides of a reloc code.  The idea is that, eventually, there
1656         will be one enumerator for every type of relocation we ever do.
1657         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1658         return a howto pointer.
1659
1660         This does mean that the application must determine the correct
1661         enumerator value; you can't get a howto pointer from a random set
1662         of attributes.
1663
1664 SENUM
1665    bfd_reloc_code_real
1666
1667 ENUM
1668   BFD_RELOC_64
1669 ENUMX
1670   BFD_RELOC_32
1671 ENUMX
1672   BFD_RELOC_26
1673 ENUMX
1674   BFD_RELOC_24
1675 ENUMX
1676   BFD_RELOC_16
1677 ENUMX
1678   BFD_RELOC_14
1679 ENUMX
1680   BFD_RELOC_8
1681 ENUMDOC
1682   Basic absolute relocations of N bits.
1683
1684 ENUM
1685   BFD_RELOC_64_PCREL
1686 ENUMX
1687   BFD_RELOC_32_PCREL
1688 ENUMX
1689   BFD_RELOC_24_PCREL
1690 ENUMX
1691   BFD_RELOC_16_PCREL
1692 ENUMX
1693   BFD_RELOC_12_PCREL
1694 ENUMX
1695   BFD_RELOC_8_PCREL
1696 ENUMDOC
1697   PC-relative relocations.  Sometimes these are relative to the address
1698 of the relocation itself; sometimes they are relative to the start of
1699 the section containing the relocation.  It depends on the specific target.
1700
1701 The 24-bit relocation is used in some Intel 960 configurations.
1702
1703 ENUM
1704   BFD_RELOC_32_SECREL
1705 ENUMDOC
1706   Section relative relocations.  Some targets need this for DWARF2.
1707
1708 ENUM
1709   BFD_RELOC_32_GOT_PCREL
1710 ENUMX
1711   BFD_RELOC_16_GOT_PCREL
1712 ENUMX
1713   BFD_RELOC_8_GOT_PCREL
1714 ENUMX
1715   BFD_RELOC_32_GOTOFF
1716 ENUMX
1717   BFD_RELOC_16_GOTOFF
1718 ENUMX
1719   BFD_RELOC_LO16_GOTOFF
1720 ENUMX
1721   BFD_RELOC_HI16_GOTOFF
1722 ENUMX
1723   BFD_RELOC_HI16_S_GOTOFF
1724 ENUMX
1725   BFD_RELOC_8_GOTOFF
1726 ENUMX
1727   BFD_RELOC_64_PLT_PCREL
1728 ENUMX
1729   BFD_RELOC_32_PLT_PCREL
1730 ENUMX
1731   BFD_RELOC_24_PLT_PCREL
1732 ENUMX
1733   BFD_RELOC_16_PLT_PCREL
1734 ENUMX
1735   BFD_RELOC_8_PLT_PCREL
1736 ENUMX
1737   BFD_RELOC_64_PLTOFF
1738 ENUMX
1739   BFD_RELOC_32_PLTOFF
1740 ENUMX
1741   BFD_RELOC_16_PLTOFF
1742 ENUMX
1743   BFD_RELOC_LO16_PLTOFF
1744 ENUMX
1745   BFD_RELOC_HI16_PLTOFF
1746 ENUMX
1747   BFD_RELOC_HI16_S_PLTOFF
1748 ENUMX
1749   BFD_RELOC_8_PLTOFF
1750 ENUMDOC
1751   For ELF.
1752
1753 ENUM
1754   BFD_RELOC_SIZE32
1755 ENUMX
1756   BFD_RELOC_SIZE64
1757 ENUMDOC
1758   Size relocations.
1759
1760 ENUM
1761   BFD_RELOC_68K_GLOB_DAT
1762 ENUMX
1763   BFD_RELOC_68K_JMP_SLOT
1764 ENUMX
1765   BFD_RELOC_68K_RELATIVE
1766 ENUMX
1767   BFD_RELOC_68K_TLS_GD32
1768 ENUMX
1769   BFD_RELOC_68K_TLS_GD16
1770 ENUMX
1771   BFD_RELOC_68K_TLS_GD8
1772 ENUMX
1773   BFD_RELOC_68K_TLS_LDM32
1774 ENUMX
1775   BFD_RELOC_68K_TLS_LDM16
1776 ENUMX
1777   BFD_RELOC_68K_TLS_LDM8
1778 ENUMX
1779   BFD_RELOC_68K_TLS_LDO32
1780 ENUMX
1781   BFD_RELOC_68K_TLS_LDO16
1782 ENUMX
1783   BFD_RELOC_68K_TLS_LDO8
1784 ENUMX
1785   BFD_RELOC_68K_TLS_IE32
1786 ENUMX
1787   BFD_RELOC_68K_TLS_IE16
1788 ENUMX
1789   BFD_RELOC_68K_TLS_IE8
1790 ENUMX
1791   BFD_RELOC_68K_TLS_LE32
1792 ENUMX
1793   BFD_RELOC_68K_TLS_LE16
1794 ENUMX
1795   BFD_RELOC_68K_TLS_LE8
1796 ENUMDOC
1797   Relocations used by 68K ELF.
1798
1799 ENUM
1800   BFD_RELOC_32_BASEREL
1801 ENUMX
1802   BFD_RELOC_16_BASEREL
1803 ENUMX
1804   BFD_RELOC_LO16_BASEREL
1805 ENUMX
1806   BFD_RELOC_HI16_BASEREL
1807 ENUMX
1808   BFD_RELOC_HI16_S_BASEREL
1809 ENUMX
1810   BFD_RELOC_8_BASEREL
1811 ENUMX
1812   BFD_RELOC_RVA
1813 ENUMDOC
1814   Linkage-table relative.
1815
1816 ENUM
1817   BFD_RELOC_8_FFnn
1818 ENUMDOC
1819   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1820
1821 ENUM
1822   BFD_RELOC_32_PCREL_S2
1823 ENUMX
1824   BFD_RELOC_16_PCREL_S2
1825 ENUMX
1826   BFD_RELOC_23_PCREL_S2
1827 ENUMDOC
1828   These PC-relative relocations are stored as word displacements --
1829 i.e., byte displacements shifted right two bits.  The 30-bit word
1830 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1831 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1832 signed 16-bit displacement is used on the MIPS, and the 23-bit
1833 displacement is used on the Alpha.
1834
1835 ENUM
1836   BFD_RELOC_HI22
1837 ENUMX
1838   BFD_RELOC_LO10
1839 ENUMDOC
1840   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1841 the target word.  These are used on the SPARC.
1842
1843 ENUM
1844   BFD_RELOC_GPREL16
1845 ENUMX
1846   BFD_RELOC_GPREL32
1847 ENUMDOC
1848   For systems that allocate a Global Pointer register, these are
1849 displacements off that register.  These relocation types are
1850 handled specially, because the value the register will have is
1851 decided relatively late.
1852
1853 ENUM
1854   BFD_RELOC_I960_CALLJ
1855 ENUMDOC
1856   Reloc types used for i960/b.out.
1857
1858 ENUM
1859   BFD_RELOC_NONE
1860 ENUMX
1861   BFD_RELOC_SPARC_WDISP22
1862 ENUMX
1863   BFD_RELOC_SPARC22
1864 ENUMX
1865   BFD_RELOC_SPARC13
1866 ENUMX
1867   BFD_RELOC_SPARC_GOT10
1868 ENUMX
1869   BFD_RELOC_SPARC_GOT13
1870 ENUMX
1871   BFD_RELOC_SPARC_GOT22
1872 ENUMX
1873   BFD_RELOC_SPARC_PC10
1874 ENUMX
1875   BFD_RELOC_SPARC_PC22
1876 ENUMX
1877   BFD_RELOC_SPARC_WPLT30
1878 ENUMX
1879   BFD_RELOC_SPARC_COPY
1880 ENUMX
1881   BFD_RELOC_SPARC_GLOB_DAT
1882 ENUMX
1883   BFD_RELOC_SPARC_JMP_SLOT
1884 ENUMX
1885   BFD_RELOC_SPARC_RELATIVE
1886 ENUMX
1887   BFD_RELOC_SPARC_UA16
1888 ENUMX
1889   BFD_RELOC_SPARC_UA32
1890 ENUMX
1891   BFD_RELOC_SPARC_UA64
1892 ENUMX
1893   BFD_RELOC_SPARC_GOTDATA_HIX22
1894 ENUMX
1895   BFD_RELOC_SPARC_GOTDATA_LOX10
1896 ENUMX
1897   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1898 ENUMX
1899   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1900 ENUMX
1901   BFD_RELOC_SPARC_GOTDATA_OP
1902 ENUMX
1903   BFD_RELOC_SPARC_JMP_IREL
1904 ENUMX
1905   BFD_RELOC_SPARC_IRELATIVE
1906 ENUMDOC
1907   SPARC ELF relocations.  There is probably some overlap with other
1908   relocation types already defined.
1909
1910 ENUM
1911   BFD_RELOC_SPARC_BASE13
1912 ENUMX
1913   BFD_RELOC_SPARC_BASE22
1914 ENUMDOC
1915   I think these are specific to SPARC a.out (e.g., Sun 4).
1916
1917 ENUMEQ
1918   BFD_RELOC_SPARC_64
1919   BFD_RELOC_64
1920 ENUMX
1921   BFD_RELOC_SPARC_10
1922 ENUMX
1923   BFD_RELOC_SPARC_11
1924 ENUMX
1925   BFD_RELOC_SPARC_OLO10
1926 ENUMX
1927   BFD_RELOC_SPARC_HH22
1928 ENUMX
1929   BFD_RELOC_SPARC_HM10
1930 ENUMX
1931   BFD_RELOC_SPARC_LM22
1932 ENUMX
1933   BFD_RELOC_SPARC_PC_HH22
1934 ENUMX
1935   BFD_RELOC_SPARC_PC_HM10
1936 ENUMX
1937   BFD_RELOC_SPARC_PC_LM22
1938 ENUMX
1939   BFD_RELOC_SPARC_WDISP16
1940 ENUMX
1941   BFD_RELOC_SPARC_WDISP19
1942 ENUMX
1943   BFD_RELOC_SPARC_7
1944 ENUMX
1945   BFD_RELOC_SPARC_6
1946 ENUMX
1947   BFD_RELOC_SPARC_5
1948 ENUMEQX
1949   BFD_RELOC_SPARC_DISP64
1950   BFD_RELOC_64_PCREL
1951 ENUMX
1952   BFD_RELOC_SPARC_PLT32
1953 ENUMX
1954   BFD_RELOC_SPARC_PLT64
1955 ENUMX
1956   BFD_RELOC_SPARC_HIX22
1957 ENUMX
1958   BFD_RELOC_SPARC_LOX10
1959 ENUMX
1960   BFD_RELOC_SPARC_H44
1961 ENUMX
1962   BFD_RELOC_SPARC_M44
1963 ENUMX
1964   BFD_RELOC_SPARC_L44
1965 ENUMX
1966   BFD_RELOC_SPARC_REGISTER
1967 ENUMX
1968   BFD_RELOC_SPARC_H34
1969 ENUMX
1970   BFD_RELOC_SPARC_SIZE32
1971 ENUMX
1972   BFD_RELOC_SPARC_SIZE64
1973 ENUMX
1974   BFD_RELOC_SPARC_WDISP10
1975 ENUMDOC
1976   SPARC64 relocations
1977
1978 ENUM
1979   BFD_RELOC_SPARC_REV32
1980 ENUMDOC
1981   SPARC little endian relocation
1982 ENUM
1983   BFD_RELOC_SPARC_TLS_GD_HI22
1984 ENUMX
1985   BFD_RELOC_SPARC_TLS_GD_LO10
1986 ENUMX
1987   BFD_RELOC_SPARC_TLS_GD_ADD
1988 ENUMX
1989   BFD_RELOC_SPARC_TLS_GD_CALL
1990 ENUMX
1991   BFD_RELOC_SPARC_TLS_LDM_HI22
1992 ENUMX
1993   BFD_RELOC_SPARC_TLS_LDM_LO10
1994 ENUMX
1995   BFD_RELOC_SPARC_TLS_LDM_ADD
1996 ENUMX
1997   BFD_RELOC_SPARC_TLS_LDM_CALL
1998 ENUMX
1999   BFD_RELOC_SPARC_TLS_LDO_HIX22
2000 ENUMX
2001   BFD_RELOC_SPARC_TLS_LDO_LOX10
2002 ENUMX
2003   BFD_RELOC_SPARC_TLS_LDO_ADD
2004 ENUMX
2005   BFD_RELOC_SPARC_TLS_IE_HI22
2006 ENUMX
2007   BFD_RELOC_SPARC_TLS_IE_LO10
2008 ENUMX
2009   BFD_RELOC_SPARC_TLS_IE_LD
2010 ENUMX
2011   BFD_RELOC_SPARC_TLS_IE_LDX
2012 ENUMX
2013   BFD_RELOC_SPARC_TLS_IE_ADD
2014 ENUMX
2015   BFD_RELOC_SPARC_TLS_LE_HIX22
2016 ENUMX
2017   BFD_RELOC_SPARC_TLS_LE_LOX10
2018 ENUMX
2019   BFD_RELOC_SPARC_TLS_DTPMOD32
2020 ENUMX
2021   BFD_RELOC_SPARC_TLS_DTPMOD64
2022 ENUMX
2023   BFD_RELOC_SPARC_TLS_DTPOFF32
2024 ENUMX
2025   BFD_RELOC_SPARC_TLS_DTPOFF64
2026 ENUMX
2027   BFD_RELOC_SPARC_TLS_TPOFF32
2028 ENUMX
2029   BFD_RELOC_SPARC_TLS_TPOFF64
2030 ENUMDOC
2031   SPARC TLS relocations
2032
2033 ENUM
2034   BFD_RELOC_SPU_IMM7
2035 ENUMX
2036   BFD_RELOC_SPU_IMM8
2037 ENUMX
2038   BFD_RELOC_SPU_IMM10
2039 ENUMX
2040   BFD_RELOC_SPU_IMM10W
2041 ENUMX
2042   BFD_RELOC_SPU_IMM16
2043 ENUMX
2044   BFD_RELOC_SPU_IMM16W
2045 ENUMX
2046   BFD_RELOC_SPU_IMM18
2047 ENUMX
2048   BFD_RELOC_SPU_PCREL9a
2049 ENUMX
2050   BFD_RELOC_SPU_PCREL9b
2051 ENUMX
2052   BFD_RELOC_SPU_PCREL16
2053 ENUMX
2054   BFD_RELOC_SPU_LO16
2055 ENUMX
2056   BFD_RELOC_SPU_HI16
2057 ENUMX
2058   BFD_RELOC_SPU_PPU32
2059 ENUMX
2060   BFD_RELOC_SPU_PPU64
2061 ENUMX
2062   BFD_RELOC_SPU_ADD_PIC
2063 ENUMDOC
2064   SPU Relocations.
2065
2066 ENUM
2067   BFD_RELOC_ALPHA_GPDISP_HI16
2068 ENUMDOC
2069   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2070      "addend" in some special way.
2071   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2072      writing; when reading, it will be the absolute section symbol.  The
2073      addend is the displacement in bytes of the "lda" instruction from
2074      the "ldah" instruction (which is at the address of this reloc).
2075 ENUM
2076   BFD_RELOC_ALPHA_GPDISP_LO16
2077 ENUMDOC
2078   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2079      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2080      relocations out, and is filled in with the file's GP value on
2081      reading, for convenience.
2082
2083 ENUM
2084   BFD_RELOC_ALPHA_GPDISP
2085 ENUMDOC
2086   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2087      relocation except that there is no accompanying GPDISP_LO16
2088      relocation.
2089
2090 ENUM
2091   BFD_RELOC_ALPHA_LITERAL
2092 ENUMX
2093   BFD_RELOC_ALPHA_ELF_LITERAL
2094 ENUMX
2095   BFD_RELOC_ALPHA_LITUSE
2096 ENUMDOC
2097   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2098      the assembler turns it into a LDQ instruction to load the address of
2099      the symbol, and then fills in a register in the real instruction.
2100
2101      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2102      section symbol.  The addend is ignored when writing, but is filled
2103      in with the file's GP value on reading, for convenience, as with the
2104      GPDISP_LO16 reloc.
2105
2106      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2107      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2108      but it generates output not based on the position within the .got
2109      section, but relative to the GP value chosen for the file during the
2110      final link stage.
2111
2112      The LITUSE reloc, on the instruction using the loaded address, gives
2113      information to the linker that it might be able to use to optimize
2114      away some literal section references.  The symbol is ignored (read
2115      as the absolute section symbol), and the "addend" indicates the type
2116      of instruction using the register:
2117               1 - "memory" fmt insn
2118               2 - byte-manipulation (byte offset reg)
2119               3 - jsr (target of branch)
2120
2121 ENUM
2122   BFD_RELOC_ALPHA_HINT
2123 ENUMDOC
2124   The HINT relocation indicates a value that should be filled into the
2125      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2126      prediction logic which may be provided on some processors.
2127
2128 ENUM
2129   BFD_RELOC_ALPHA_LINKAGE
2130 ENUMDOC
2131   The LINKAGE relocation outputs a linkage pair in the object file,
2132      which is filled by the linker.
2133
2134 ENUM
2135   BFD_RELOC_ALPHA_CODEADDR
2136 ENUMDOC
2137   The CODEADDR relocation outputs a STO_CA in the object file,
2138      which is filled by the linker.
2139
2140 ENUM
2141   BFD_RELOC_ALPHA_GPREL_HI16
2142 ENUMX
2143   BFD_RELOC_ALPHA_GPREL_LO16
2144 ENUMDOC
2145   The GPREL_HI/LO relocations together form a 32-bit offset from the
2146      GP register.
2147
2148 ENUM
2149   BFD_RELOC_ALPHA_BRSGP
2150 ENUMDOC
2151   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2152   share a common GP, and the target address is adjusted for
2153   STO_ALPHA_STD_GPLOAD.
2154
2155 ENUM
2156   BFD_RELOC_ALPHA_NOP
2157 ENUMDOC
2158   The NOP relocation outputs a NOP if the longword displacement
2159      between two procedure entry points is < 2^21.
2160
2161 ENUM
2162   BFD_RELOC_ALPHA_BSR
2163 ENUMDOC
2164   The BSR relocation outputs a BSR if the longword displacement
2165      between two procedure entry points is < 2^21.
2166
2167 ENUM
2168   BFD_RELOC_ALPHA_LDA
2169 ENUMDOC
2170   The LDA relocation outputs a LDA if the longword displacement
2171      between two procedure entry points is < 2^16.
2172
2173 ENUM
2174   BFD_RELOC_ALPHA_BOH
2175 ENUMDOC
2176   The BOH relocation outputs a BSR if the longword displacement
2177      between two procedure entry points is < 2^21, or else a hint.
2178
2179 ENUM
2180   BFD_RELOC_ALPHA_TLSGD
2181 ENUMX
2182   BFD_RELOC_ALPHA_TLSLDM
2183 ENUMX
2184   BFD_RELOC_ALPHA_DTPMOD64
2185 ENUMX
2186   BFD_RELOC_ALPHA_GOTDTPREL16
2187 ENUMX
2188   BFD_RELOC_ALPHA_DTPREL64
2189 ENUMX
2190   BFD_RELOC_ALPHA_DTPREL_HI16
2191 ENUMX
2192   BFD_RELOC_ALPHA_DTPREL_LO16
2193 ENUMX
2194   BFD_RELOC_ALPHA_DTPREL16
2195 ENUMX
2196   BFD_RELOC_ALPHA_GOTTPREL16
2197 ENUMX
2198   BFD_RELOC_ALPHA_TPREL64
2199 ENUMX
2200   BFD_RELOC_ALPHA_TPREL_HI16
2201 ENUMX
2202   BFD_RELOC_ALPHA_TPREL_LO16
2203 ENUMX
2204   BFD_RELOC_ALPHA_TPREL16
2205 ENUMDOC
2206   Alpha thread-local storage relocations.
2207
2208 ENUM
2209   BFD_RELOC_MIPS_JMP
2210 ENUMX
2211   BFD_RELOC_MICROMIPS_JMP
2212 ENUMDOC
2213   The MIPS jump instruction.
2214
2215 ENUM
2216   BFD_RELOC_MIPS16_JMP
2217 ENUMDOC
2218   The MIPS16 jump instruction.
2219
2220 ENUM
2221   BFD_RELOC_MIPS16_GPREL
2222 ENUMDOC
2223   MIPS16 GP relative reloc.
2224
2225 ENUM
2226   BFD_RELOC_HI16
2227 ENUMDOC
2228   High 16 bits of 32-bit value; simple reloc.
2229
2230 ENUM
2231   BFD_RELOC_HI16_S
2232 ENUMDOC
2233   High 16 bits of 32-bit value but the low 16 bits will be sign
2234      extended and added to form the final result.  If the low 16
2235      bits form a negative number, we need to add one to the high value
2236      to compensate for the borrow when the low bits are added.
2237
2238 ENUM
2239   BFD_RELOC_LO16
2240 ENUMDOC
2241   Low 16 bits.
2242
2243 ENUM
2244   BFD_RELOC_HI16_PCREL
2245 ENUMDOC
2246   High 16 bits of 32-bit pc-relative value
2247 ENUM
2248   BFD_RELOC_HI16_S_PCREL
2249 ENUMDOC
2250   High 16 bits of 32-bit pc-relative value, adjusted
2251 ENUM
2252   BFD_RELOC_LO16_PCREL
2253 ENUMDOC
2254   Low 16 bits of pc-relative value
2255
2256 ENUM
2257   BFD_RELOC_MIPS16_GOT16
2258 ENUMX
2259   BFD_RELOC_MIPS16_CALL16
2260 ENUMDOC
2261   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2262      16-bit immediate fields
2263 ENUM
2264   BFD_RELOC_MIPS16_HI16
2265 ENUMDOC
2266   MIPS16 high 16 bits of 32-bit value.
2267 ENUM
2268   BFD_RELOC_MIPS16_HI16_S
2269 ENUMDOC
2270   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2271      extended and added to form the final result.  If the low 16
2272      bits form a negative number, we need to add one to the high value
2273      to compensate for the borrow when the low bits are added.
2274 ENUM
2275   BFD_RELOC_MIPS16_LO16
2276 ENUMDOC
2277   MIPS16 low 16 bits.
2278
2279 ENUM
2280   BFD_RELOC_MIPS16_TLS_GD
2281 ENUMX
2282   BFD_RELOC_MIPS16_TLS_LDM
2283 ENUMX
2284   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2285 ENUMX
2286   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2287 ENUMX
2288   BFD_RELOC_MIPS16_TLS_GOTTPREL
2289 ENUMX
2290   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2291 ENUMX
2292   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2293 ENUMDOC
2294   MIPS16 TLS relocations
2295
2296 ENUM
2297   BFD_RELOC_MIPS_LITERAL
2298 ENUMX
2299   BFD_RELOC_MICROMIPS_LITERAL
2300 ENUMDOC
2301   Relocation against a MIPS literal section.
2302
2303 ENUM
2304   BFD_RELOC_MICROMIPS_7_PCREL_S1
2305 ENUMX
2306   BFD_RELOC_MICROMIPS_10_PCREL_S1
2307 ENUMX
2308   BFD_RELOC_MICROMIPS_16_PCREL_S1
2309 ENUMDOC
2310   microMIPS PC-relative relocations.
2311
2312 ENUM
2313   BFD_RELOC_MIPS16_16_PCREL_S1
2314 ENUMDOC
2315   MIPS16 PC-relative relocation.
2316
2317 ENUM
2318   BFD_RELOC_MIPS_21_PCREL_S2
2319 ENUMX
2320   BFD_RELOC_MIPS_26_PCREL_S2
2321 ENUMX
2322   BFD_RELOC_MIPS_18_PCREL_S3
2323 ENUMX
2324   BFD_RELOC_MIPS_19_PCREL_S2
2325 ENUMDOC
2326   MIPS PC-relative relocations.
2327
2328 ENUM
2329   BFD_RELOC_MICROMIPS_GPREL16
2330 ENUMX
2331   BFD_RELOC_MICROMIPS_HI16
2332 ENUMX
2333   BFD_RELOC_MICROMIPS_HI16_S
2334 ENUMX
2335   BFD_RELOC_MICROMIPS_LO16
2336 ENUMDOC
2337   microMIPS versions of generic BFD relocs.
2338
2339 ENUM
2340   BFD_RELOC_MIPS_GOT16
2341 ENUMX
2342   BFD_RELOC_MICROMIPS_GOT16
2343 ENUMX
2344   BFD_RELOC_MIPS_CALL16
2345 ENUMX
2346   BFD_RELOC_MICROMIPS_CALL16
2347 ENUMX
2348   BFD_RELOC_MIPS_GOT_HI16
2349 ENUMX
2350   BFD_RELOC_MICROMIPS_GOT_HI16
2351 ENUMX
2352   BFD_RELOC_MIPS_GOT_LO16
2353 ENUMX
2354   BFD_RELOC_MICROMIPS_GOT_LO16
2355 ENUMX
2356   BFD_RELOC_MIPS_CALL_HI16
2357 ENUMX
2358   BFD_RELOC_MICROMIPS_CALL_HI16
2359 ENUMX
2360   BFD_RELOC_MIPS_CALL_LO16
2361 ENUMX
2362   BFD_RELOC_MICROMIPS_CALL_LO16
2363 ENUMX
2364   BFD_RELOC_MIPS_SUB
2365 ENUMX
2366   BFD_RELOC_MICROMIPS_SUB
2367 ENUMX
2368   BFD_RELOC_MIPS_GOT_PAGE
2369 ENUMX
2370   BFD_RELOC_MICROMIPS_GOT_PAGE
2371 ENUMX
2372   BFD_RELOC_MIPS_GOT_OFST
2373 ENUMX
2374   BFD_RELOC_MICROMIPS_GOT_OFST
2375 ENUMX
2376   BFD_RELOC_MIPS_GOT_DISP
2377 ENUMX
2378   BFD_RELOC_MICROMIPS_GOT_DISP
2379 ENUMX
2380   BFD_RELOC_MIPS_SHIFT5
2381 ENUMX
2382   BFD_RELOC_MIPS_SHIFT6
2383 ENUMX
2384   BFD_RELOC_MIPS_INSERT_A
2385 ENUMX
2386   BFD_RELOC_MIPS_INSERT_B
2387 ENUMX
2388   BFD_RELOC_MIPS_DELETE
2389 ENUMX
2390   BFD_RELOC_MIPS_HIGHEST
2391 ENUMX
2392   BFD_RELOC_MICROMIPS_HIGHEST
2393 ENUMX
2394   BFD_RELOC_MIPS_HIGHER
2395 ENUMX
2396   BFD_RELOC_MICROMIPS_HIGHER
2397 ENUMX
2398   BFD_RELOC_MIPS_SCN_DISP
2399 ENUMX
2400   BFD_RELOC_MICROMIPS_SCN_DISP
2401 ENUMX
2402   BFD_RELOC_MIPS_REL16
2403 ENUMX
2404   BFD_RELOC_MIPS_RELGOT
2405 ENUMX
2406   BFD_RELOC_MIPS_JALR
2407 ENUMX
2408   BFD_RELOC_MICROMIPS_JALR
2409 ENUMX
2410   BFD_RELOC_MIPS_TLS_DTPMOD32
2411 ENUMX
2412   BFD_RELOC_MIPS_TLS_DTPREL32
2413 ENUMX
2414   BFD_RELOC_MIPS_TLS_DTPMOD64
2415 ENUMX
2416   BFD_RELOC_MIPS_TLS_DTPREL64
2417 ENUMX
2418   BFD_RELOC_MIPS_TLS_GD
2419 ENUMX
2420   BFD_RELOC_MICROMIPS_TLS_GD
2421 ENUMX
2422   BFD_RELOC_MIPS_TLS_LDM
2423 ENUMX
2424   BFD_RELOC_MICROMIPS_TLS_LDM
2425 ENUMX
2426   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2427 ENUMX
2428   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2429 ENUMX
2430   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2431 ENUMX
2432   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2433 ENUMX
2434   BFD_RELOC_MIPS_TLS_GOTTPREL
2435 ENUMX
2436   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2437 ENUMX
2438   BFD_RELOC_MIPS_TLS_TPREL32
2439 ENUMX
2440   BFD_RELOC_MIPS_TLS_TPREL64
2441 ENUMX
2442   BFD_RELOC_MIPS_TLS_TPREL_HI16
2443 ENUMX
2444   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2445 ENUMX
2446   BFD_RELOC_MIPS_TLS_TPREL_LO16
2447 ENUMX
2448   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2449 ENUMX
2450   BFD_RELOC_MIPS_EH
2451 ENUMDOC
2452   MIPS ELF relocations.
2453 COMMENT
2454
2455 ENUM
2456   BFD_RELOC_MIPS_COPY
2457 ENUMX
2458   BFD_RELOC_MIPS_JUMP_SLOT
2459 ENUMDOC
2460   MIPS ELF relocations (VxWorks and PLT extensions).
2461 COMMENT
2462
2463 ENUM
2464   BFD_RELOC_MOXIE_10_PCREL
2465 ENUMDOC
2466   Moxie ELF relocations.
2467 COMMENT
2468
2469 ENUM
2470   BFD_RELOC_FT32_10
2471 ENUMX
2472   BFD_RELOC_FT32_20
2473 ENUMX
2474   BFD_RELOC_FT32_17
2475 ENUMX
2476   BFD_RELOC_FT32_18
2477 ENUMDOC
2478   FT32 ELF relocations.
2479 COMMENT
2480
2481 ENUM
2482   BFD_RELOC_FRV_LABEL16
2483 ENUMX
2484   BFD_RELOC_FRV_LABEL24
2485 ENUMX
2486   BFD_RELOC_FRV_LO16
2487 ENUMX
2488   BFD_RELOC_FRV_HI16
2489 ENUMX
2490   BFD_RELOC_FRV_GPREL12
2491 ENUMX
2492   BFD_RELOC_FRV_GPRELU12
2493 ENUMX
2494   BFD_RELOC_FRV_GPREL32
2495 ENUMX
2496   BFD_RELOC_FRV_GPRELHI
2497 ENUMX
2498   BFD_RELOC_FRV_GPRELLO
2499 ENUMX
2500   BFD_RELOC_FRV_GOT12
2501 ENUMX
2502   BFD_RELOC_FRV_GOTHI
2503 ENUMX
2504   BFD_RELOC_FRV_GOTLO
2505 ENUMX
2506   BFD_RELOC_FRV_FUNCDESC
2507 ENUMX
2508   BFD_RELOC_FRV_FUNCDESC_GOT12
2509 ENUMX
2510   BFD_RELOC_FRV_FUNCDESC_GOTHI
2511 ENUMX
2512   BFD_RELOC_FRV_FUNCDESC_GOTLO
2513 ENUMX
2514   BFD_RELOC_FRV_FUNCDESC_VALUE
2515 ENUMX
2516   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2517 ENUMX
2518   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2519 ENUMX
2520   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2521 ENUMX
2522   BFD_RELOC_FRV_GOTOFF12
2523 ENUMX
2524   BFD_RELOC_FRV_GOTOFFHI
2525 ENUMX
2526   BFD_RELOC_FRV_GOTOFFLO
2527 ENUMX
2528   BFD_RELOC_FRV_GETTLSOFF
2529 ENUMX
2530   BFD_RELOC_FRV_TLSDESC_VALUE
2531 ENUMX
2532   BFD_RELOC_FRV_GOTTLSDESC12
2533 ENUMX
2534   BFD_RELOC_FRV_GOTTLSDESCHI
2535 ENUMX
2536   BFD_RELOC_FRV_GOTTLSDESCLO
2537 ENUMX
2538   BFD_RELOC_FRV_TLSMOFF12
2539 ENUMX
2540   BFD_RELOC_FRV_TLSMOFFHI
2541 ENUMX
2542   BFD_RELOC_FRV_TLSMOFFLO
2543 ENUMX
2544   BFD_RELOC_FRV_GOTTLSOFF12
2545 ENUMX
2546   BFD_RELOC_FRV_GOTTLSOFFHI
2547 ENUMX
2548   BFD_RELOC_FRV_GOTTLSOFFLO
2549 ENUMX
2550   BFD_RELOC_FRV_TLSOFF
2551 ENUMX
2552   BFD_RELOC_FRV_TLSDESC_RELAX
2553 ENUMX
2554   BFD_RELOC_FRV_GETTLSOFF_RELAX
2555 ENUMX
2556   BFD_RELOC_FRV_TLSOFF_RELAX
2557 ENUMX
2558   BFD_RELOC_FRV_TLSMOFF
2559 ENUMDOC
2560   Fujitsu Frv Relocations.
2561 COMMENT
2562
2563 ENUM
2564   BFD_RELOC_MN10300_GOTOFF24
2565 ENUMDOC
2566   This is a 24bit GOT-relative reloc for the mn10300.
2567 ENUM
2568   BFD_RELOC_MN10300_GOT32
2569 ENUMDOC
2570   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2571   in the instruction.
2572 ENUM
2573   BFD_RELOC_MN10300_GOT24
2574 ENUMDOC
2575   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2576   in the instruction.
2577 ENUM
2578   BFD_RELOC_MN10300_GOT16
2579 ENUMDOC
2580   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2581   in the instruction.
2582 ENUM
2583   BFD_RELOC_MN10300_COPY
2584 ENUMDOC
2585   Copy symbol at runtime.
2586 ENUM
2587   BFD_RELOC_MN10300_GLOB_DAT
2588 ENUMDOC
2589   Create GOT entry.
2590 ENUM
2591   BFD_RELOC_MN10300_JMP_SLOT
2592 ENUMDOC
2593   Create PLT entry.
2594 ENUM
2595   BFD_RELOC_MN10300_RELATIVE
2596 ENUMDOC
2597   Adjust by program base.
2598 ENUM
2599   BFD_RELOC_MN10300_SYM_DIFF
2600 ENUMDOC
2601   Together with another reloc targeted at the same location,
2602   allows for a value that is the difference of two symbols
2603   in the same section.
2604 ENUM
2605   BFD_RELOC_MN10300_ALIGN
2606 ENUMDOC
2607   The addend of this reloc is an alignment power that must
2608   be honoured at the offset's location, regardless of linker
2609   relaxation.
2610 ENUM
2611   BFD_RELOC_MN10300_TLS_GD
2612 ENUMX
2613   BFD_RELOC_MN10300_TLS_LD
2614 ENUMX
2615   BFD_RELOC_MN10300_TLS_LDO
2616 ENUMX
2617   BFD_RELOC_MN10300_TLS_GOTIE
2618 ENUMX
2619   BFD_RELOC_MN10300_TLS_IE
2620 ENUMX
2621   BFD_RELOC_MN10300_TLS_LE
2622 ENUMX
2623   BFD_RELOC_MN10300_TLS_DTPMOD
2624 ENUMX
2625   BFD_RELOC_MN10300_TLS_DTPOFF
2626 ENUMX
2627   BFD_RELOC_MN10300_TLS_TPOFF
2628 ENUMDOC
2629   Various TLS-related relocations.
2630 ENUM
2631   BFD_RELOC_MN10300_32_PCREL
2632 ENUMDOC
2633   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2634   instruction.
2635 ENUM
2636   BFD_RELOC_MN10300_16_PCREL
2637 ENUMDOC
2638   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2639   instruction.
2640 COMMENT
2641
2642 ENUM
2643   BFD_RELOC_386_GOT32
2644 ENUMX
2645   BFD_RELOC_386_PLT32
2646 ENUMX
2647   BFD_RELOC_386_COPY
2648 ENUMX
2649   BFD_RELOC_386_GLOB_DAT
2650 ENUMX
2651   BFD_RELOC_386_JUMP_SLOT
2652 ENUMX
2653   BFD_RELOC_386_RELATIVE
2654 ENUMX
2655   BFD_RELOC_386_GOTOFF
2656 ENUMX
2657   BFD_RELOC_386_GOTPC
2658 ENUMX
2659   BFD_RELOC_386_TLS_TPOFF
2660 ENUMX
2661   BFD_RELOC_386_TLS_IE
2662 ENUMX
2663   BFD_RELOC_386_TLS_GOTIE
2664 ENUMX
2665   BFD_RELOC_386_TLS_LE
2666 ENUMX
2667   BFD_RELOC_386_TLS_GD
2668 ENUMX
2669   BFD_RELOC_386_TLS_LDM
2670 ENUMX
2671   BFD_RELOC_386_TLS_LDO_32
2672 ENUMX
2673   BFD_RELOC_386_TLS_IE_32
2674 ENUMX
2675   BFD_RELOC_386_TLS_LE_32
2676 ENUMX
2677   BFD_RELOC_386_TLS_DTPMOD32
2678 ENUMX
2679   BFD_RELOC_386_TLS_DTPOFF32
2680 ENUMX
2681   BFD_RELOC_386_TLS_TPOFF32
2682 ENUMX
2683   BFD_RELOC_386_TLS_GOTDESC
2684 ENUMX
2685   BFD_RELOC_386_TLS_DESC_CALL
2686 ENUMX
2687   BFD_RELOC_386_TLS_DESC
2688 ENUMX
2689   BFD_RELOC_386_IRELATIVE
2690 ENUMX
2691   BFD_RELOC_386_GOT32X
2692 ENUMDOC
2693   i386/elf relocations
2694
2695 ENUM
2696   BFD_RELOC_X86_64_GOT32
2697 ENUMX
2698   BFD_RELOC_X86_64_PLT32
2699 ENUMX
2700   BFD_RELOC_X86_64_COPY
2701 ENUMX
2702   BFD_RELOC_X86_64_GLOB_DAT
2703 ENUMX
2704   BFD_RELOC_X86_64_JUMP_SLOT
2705 ENUMX
2706   BFD_RELOC_X86_64_RELATIVE
2707 ENUMX
2708   BFD_RELOC_X86_64_GOTPCREL
2709 ENUMX
2710   BFD_RELOC_X86_64_32S
2711 ENUMX
2712   BFD_RELOC_X86_64_DTPMOD64
2713 ENUMX
2714   BFD_RELOC_X86_64_DTPOFF64
2715 ENUMX
2716   BFD_RELOC_X86_64_TPOFF64
2717 ENUMX
2718   BFD_RELOC_X86_64_TLSGD
2719 ENUMX
2720   BFD_RELOC_X86_64_TLSLD
2721 ENUMX
2722   BFD_RELOC_X86_64_DTPOFF32
2723 ENUMX
2724   BFD_RELOC_X86_64_GOTTPOFF
2725 ENUMX
2726   BFD_RELOC_X86_64_TPOFF32
2727 ENUMX
2728   BFD_RELOC_X86_64_GOTOFF64
2729 ENUMX
2730   BFD_RELOC_X86_64_GOTPC32
2731 ENUMX
2732   BFD_RELOC_X86_64_GOT64
2733 ENUMX
2734   BFD_RELOC_X86_64_GOTPCREL64
2735 ENUMX
2736   BFD_RELOC_X86_64_GOTPC64
2737 ENUMX
2738   BFD_RELOC_X86_64_GOTPLT64
2739 ENUMX
2740   BFD_RELOC_X86_64_PLTOFF64
2741 ENUMX
2742   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2743 ENUMX
2744   BFD_RELOC_X86_64_TLSDESC_CALL
2745 ENUMX
2746   BFD_RELOC_X86_64_TLSDESC
2747 ENUMX
2748   BFD_RELOC_X86_64_IRELATIVE
2749 ENUMX
2750   BFD_RELOC_X86_64_PC32_BND
2751 ENUMX
2752   BFD_RELOC_X86_64_PLT32_BND
2753 ENUMX
2754   BFD_RELOC_X86_64_GOTPCRELX
2755 ENUMX
2756   BFD_RELOC_X86_64_REX_GOTPCRELX
2757 ENUMDOC
2758   x86-64/elf relocations
2759
2760 ENUM
2761   BFD_RELOC_NS32K_IMM_8
2762 ENUMX
2763   BFD_RELOC_NS32K_IMM_16
2764 ENUMX
2765   BFD_RELOC_NS32K_IMM_32
2766 ENUMX
2767   BFD_RELOC_NS32K_IMM_8_PCREL
2768 ENUMX
2769   BFD_RELOC_NS32K_IMM_16_PCREL
2770 ENUMX
2771   BFD_RELOC_NS32K_IMM_32_PCREL
2772 ENUMX
2773   BFD_RELOC_NS32K_DISP_8
2774 ENUMX
2775   BFD_RELOC_NS32K_DISP_16
2776 ENUMX
2777   BFD_RELOC_NS32K_DISP_32
2778 ENUMX
2779   BFD_RELOC_NS32K_DISP_8_PCREL
2780 ENUMX
2781   BFD_RELOC_NS32K_DISP_16_PCREL
2782 ENUMX
2783   BFD_RELOC_NS32K_DISP_32_PCREL
2784 ENUMDOC
2785   ns32k relocations
2786
2787 ENUM
2788   BFD_RELOC_PDP11_DISP_8_PCREL
2789 ENUMX
2790   BFD_RELOC_PDP11_DISP_6_PCREL
2791 ENUMDOC
2792   PDP11 relocations
2793
2794 ENUM
2795   BFD_RELOC_PJ_CODE_HI16
2796 ENUMX
2797   BFD_RELOC_PJ_CODE_LO16
2798 ENUMX
2799   BFD_RELOC_PJ_CODE_DIR16
2800 ENUMX
2801   BFD_RELOC_PJ_CODE_DIR32
2802 ENUMX
2803   BFD_RELOC_PJ_CODE_REL16
2804 ENUMX
2805   BFD_RELOC_PJ_CODE_REL32
2806 ENUMDOC
2807   Picojava relocs.  Not all of these appear in object files.
2808
2809 ENUM
2810   BFD_RELOC_PPC_B26
2811 ENUMX
2812   BFD_RELOC_PPC_BA26
2813 ENUMX
2814   BFD_RELOC_PPC_TOC16
2815 ENUMX
2816   BFD_RELOC_PPC_B16
2817 ENUMX
2818   BFD_RELOC_PPC_B16_BRTAKEN
2819 ENUMX
2820   BFD_RELOC_PPC_B16_BRNTAKEN
2821 ENUMX
2822   BFD_RELOC_PPC_BA16
2823 ENUMX
2824   BFD_RELOC_PPC_BA16_BRTAKEN
2825 ENUMX
2826   BFD_RELOC_PPC_BA16_BRNTAKEN
2827 ENUMX
2828   BFD_RELOC_PPC_COPY
2829 ENUMX
2830   BFD_RELOC_PPC_GLOB_DAT
2831 ENUMX
2832   BFD_RELOC_PPC_JMP_SLOT
2833 ENUMX
2834   BFD_RELOC_PPC_RELATIVE
2835 ENUMX
2836   BFD_RELOC_PPC_LOCAL24PC
2837 ENUMX
2838   BFD_RELOC_PPC_EMB_NADDR32
2839 ENUMX
2840   BFD_RELOC_PPC_EMB_NADDR16
2841 ENUMX
2842   BFD_RELOC_PPC_EMB_NADDR16_LO
2843 ENUMX
2844   BFD_RELOC_PPC_EMB_NADDR16_HI
2845 ENUMX
2846   BFD_RELOC_PPC_EMB_NADDR16_HA
2847 ENUMX
2848   BFD_RELOC_PPC_EMB_SDAI16
2849 ENUMX
2850   BFD_RELOC_PPC_EMB_SDA2I16
2851 ENUMX
2852   BFD_RELOC_PPC_EMB_SDA2REL
2853 ENUMX
2854   BFD_RELOC_PPC_EMB_SDA21
2855 ENUMX
2856   BFD_RELOC_PPC_EMB_MRKREF
2857 ENUMX
2858   BFD_RELOC_PPC_EMB_RELSEC16
2859 ENUMX
2860   BFD_RELOC_PPC_EMB_RELST_LO
2861 ENUMX
2862   BFD_RELOC_PPC_EMB_RELST_HI
2863 ENUMX
2864   BFD_RELOC_PPC_EMB_RELST_HA
2865 ENUMX
2866   BFD_RELOC_PPC_EMB_BIT_FLD
2867 ENUMX
2868   BFD_RELOC_PPC_EMB_RELSDA
2869 ENUMX
2870   BFD_RELOC_PPC_VLE_REL8
2871 ENUMX
2872   BFD_RELOC_PPC_VLE_REL15
2873 ENUMX
2874   BFD_RELOC_PPC_VLE_REL24
2875 ENUMX
2876   BFD_RELOC_PPC_VLE_LO16A
2877 ENUMX
2878   BFD_RELOC_PPC_VLE_LO16D
2879 ENUMX
2880   BFD_RELOC_PPC_VLE_HI16A
2881 ENUMX
2882   BFD_RELOC_PPC_VLE_HI16D
2883 ENUMX
2884   BFD_RELOC_PPC_VLE_HA16A
2885 ENUMX
2886   BFD_RELOC_PPC_VLE_HA16D
2887 ENUMX
2888   BFD_RELOC_PPC_VLE_SDA21
2889 ENUMX
2890   BFD_RELOC_PPC_VLE_SDA21_LO
2891 ENUMX
2892   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2893 ENUMX
2894   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2895 ENUMX
2896   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2897 ENUMX
2898   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2899 ENUMX
2900   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2901 ENUMX
2902   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2903 ENUMX
2904   BFD_RELOC_PPC_REL16DX_HA
2905 ENUMX
2906   BFD_RELOC_PPC64_HIGHER
2907 ENUMX
2908   BFD_RELOC_PPC64_HIGHER_S
2909 ENUMX
2910   BFD_RELOC_PPC64_HIGHEST
2911 ENUMX
2912   BFD_RELOC_PPC64_HIGHEST_S
2913 ENUMX
2914   BFD_RELOC_PPC64_TOC16_LO
2915 ENUMX
2916   BFD_RELOC_PPC64_TOC16_HI
2917 ENUMX
2918   BFD_RELOC_PPC64_TOC16_HA
2919 ENUMX
2920   BFD_RELOC_PPC64_TOC
2921 ENUMX
2922   BFD_RELOC_PPC64_PLTGOT16
2923 ENUMX
2924   BFD_RELOC_PPC64_PLTGOT16_LO
2925 ENUMX
2926   BFD_RELOC_PPC64_PLTGOT16_HI
2927 ENUMX
2928   BFD_RELOC_PPC64_PLTGOT16_HA
2929 ENUMX
2930   BFD_RELOC_PPC64_ADDR16_DS
2931 ENUMX
2932   BFD_RELOC_PPC64_ADDR16_LO_DS
2933 ENUMX
2934   BFD_RELOC_PPC64_GOT16_DS
2935 ENUMX
2936   BFD_RELOC_PPC64_GOT16_LO_DS
2937 ENUMX
2938   BFD_RELOC_PPC64_PLT16_LO_DS
2939 ENUMX
2940   BFD_RELOC_PPC64_SECTOFF_DS
2941 ENUMX
2942   BFD_RELOC_PPC64_SECTOFF_LO_DS
2943 ENUMX
2944   BFD_RELOC_PPC64_TOC16_DS
2945 ENUMX
2946   BFD_RELOC_PPC64_TOC16_LO_DS
2947 ENUMX
2948   BFD_RELOC_PPC64_PLTGOT16_DS
2949 ENUMX
2950   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2951 ENUMX
2952   BFD_RELOC_PPC64_ADDR16_HIGH
2953 ENUMX
2954   BFD_RELOC_PPC64_ADDR16_HIGHA
2955 ENUMX
2956   BFD_RELOC_PPC64_ADDR64_LOCAL
2957 ENUMX
2958   BFD_RELOC_PPC64_ENTRY
2959 ENUMDOC
2960   Power(rs6000) and PowerPC relocations.
2961
2962 ENUM
2963   BFD_RELOC_PPC_TLS
2964 ENUMX
2965   BFD_RELOC_PPC_TLSGD
2966 ENUMX
2967   BFD_RELOC_PPC_TLSLD
2968 ENUMX
2969   BFD_RELOC_PPC_DTPMOD
2970 ENUMX
2971   BFD_RELOC_PPC_TPREL16
2972 ENUMX
2973   BFD_RELOC_PPC_TPREL16_LO
2974 ENUMX
2975   BFD_RELOC_PPC_TPREL16_HI
2976 ENUMX
2977   BFD_RELOC_PPC_TPREL16_HA
2978 ENUMX
2979   BFD_RELOC_PPC_TPREL
2980 ENUMX
2981   BFD_RELOC_PPC_DTPREL16
2982 ENUMX
2983   BFD_RELOC_PPC_DTPREL16_LO
2984 ENUMX
2985   BFD_RELOC_PPC_DTPREL16_HI
2986 ENUMX
2987   BFD_RELOC_PPC_DTPREL16_HA
2988 ENUMX
2989   BFD_RELOC_PPC_DTPREL
2990 ENUMX
2991   BFD_RELOC_PPC_GOT_TLSGD16
2992 ENUMX
2993   BFD_RELOC_PPC_GOT_TLSGD16_LO
2994 ENUMX
2995   BFD_RELOC_PPC_GOT_TLSGD16_HI
2996 ENUMX
2997   BFD_RELOC_PPC_GOT_TLSGD16_HA
2998 ENUMX
2999   BFD_RELOC_PPC_GOT_TLSLD16
3000 ENUMX
3001   BFD_RELOC_PPC_GOT_TLSLD16_LO
3002 ENUMX
3003   BFD_RELOC_PPC_GOT_TLSLD16_HI
3004 ENUMX
3005   BFD_RELOC_PPC_GOT_TLSLD16_HA
3006 ENUMX
3007   BFD_RELOC_PPC_GOT_TPREL16
3008 ENUMX
3009   BFD_RELOC_PPC_GOT_TPREL16_LO
3010 ENUMX
3011   BFD_RELOC_PPC_GOT_TPREL16_HI
3012 ENUMX
3013   BFD_RELOC_PPC_GOT_TPREL16_HA
3014 ENUMX
3015   BFD_RELOC_PPC_GOT_DTPREL16
3016 ENUMX
3017   BFD_RELOC_PPC_GOT_DTPREL16_LO
3018 ENUMX
3019   BFD_RELOC_PPC_GOT_DTPREL16_HI
3020 ENUMX
3021   BFD_RELOC_PPC_GOT_DTPREL16_HA
3022 ENUMX
3023   BFD_RELOC_PPC64_TPREL16_DS
3024 ENUMX
3025   BFD_RELOC_PPC64_TPREL16_LO_DS
3026 ENUMX
3027   BFD_RELOC_PPC64_TPREL16_HIGHER
3028 ENUMX
3029   BFD_RELOC_PPC64_TPREL16_HIGHERA
3030 ENUMX
3031   BFD_RELOC_PPC64_TPREL16_HIGHEST
3032 ENUMX
3033   BFD_RELOC_PPC64_TPREL16_HIGHESTA
3034 ENUMX
3035   BFD_RELOC_PPC64_DTPREL16_DS
3036 ENUMX
3037   BFD_RELOC_PPC64_DTPREL16_LO_DS
3038 ENUMX
3039   BFD_RELOC_PPC64_DTPREL16_HIGHER
3040 ENUMX
3041   BFD_RELOC_PPC64_DTPREL16_HIGHERA
3042 ENUMX
3043   BFD_RELOC_PPC64_DTPREL16_HIGHEST
3044 ENUMX
3045   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3046 ENUMX
3047   BFD_RELOC_PPC64_TPREL16_HIGH
3048 ENUMX
3049   BFD_RELOC_PPC64_TPREL16_HIGHA
3050 ENUMX
3051   BFD_RELOC_PPC64_DTPREL16_HIGH
3052 ENUMX
3053   BFD_RELOC_PPC64_DTPREL16_HIGHA
3054 ENUMDOC
3055   PowerPC and PowerPC64 thread-local storage relocations.
3056
3057 ENUM
3058   BFD_RELOC_I370_D12
3059 ENUMDOC
3060   IBM 370/390 relocations
3061
3062 ENUM
3063   BFD_RELOC_CTOR
3064 ENUMDOC
3065   The type of reloc used to build a constructor table - at the moment
3066   probably a 32 bit wide absolute relocation, but the target can choose.
3067   It generally does map to one of the other relocation types.
3068
3069 ENUM
3070   BFD_RELOC_ARM_PCREL_BRANCH
3071 ENUMDOC
3072   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3073   not stored in the instruction.
3074 ENUM
3075   BFD_RELOC_ARM_PCREL_BLX
3076 ENUMDOC
3077   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3078   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3079   field in the instruction.
3080 ENUM
3081   BFD_RELOC_THUMB_PCREL_BLX
3082 ENUMDOC
3083   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3084   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3085   field in the instruction.
3086 ENUM
3087   BFD_RELOC_ARM_PCREL_CALL
3088 ENUMDOC
3089   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3090 ENUM
3091   BFD_RELOC_ARM_PCREL_JUMP
3092 ENUMDOC
3093   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3094
3095 ENUM
3096   BFD_RELOC_THUMB_PCREL_BRANCH7
3097 ENUMX
3098   BFD_RELOC_THUMB_PCREL_BRANCH9
3099 ENUMX
3100   BFD_RELOC_THUMB_PCREL_BRANCH12
3101 ENUMX
3102   BFD_RELOC_THUMB_PCREL_BRANCH20
3103 ENUMX
3104   BFD_RELOC_THUMB_PCREL_BRANCH23
3105 ENUMX
3106   BFD_RELOC_THUMB_PCREL_BRANCH25
3107 ENUMDOC
3108   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3109   The lowest bit must be zero and is not stored in the instruction.
3110   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3111   "nn" one smaller in all cases.  Note further that BRANCH23
3112   corresponds to R_ARM_THM_CALL.
3113
3114 ENUM
3115   BFD_RELOC_ARM_OFFSET_IMM
3116 ENUMDOC
3117   12-bit immediate offset, used in ARM-format ldr and str instructions.
3118
3119 ENUM
3120   BFD_RELOC_ARM_THUMB_OFFSET
3121 ENUMDOC
3122   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3123
3124 ENUM
3125   BFD_RELOC_ARM_TARGET1
3126 ENUMDOC
3127   Pc-relative or absolute relocation depending on target.  Used for
3128   entries in .init_array sections.
3129 ENUM
3130   BFD_RELOC_ARM_ROSEGREL32
3131 ENUMDOC
3132   Read-only segment base relative address.
3133 ENUM
3134   BFD_RELOC_ARM_SBREL32
3135 ENUMDOC
3136   Data segment base relative address.
3137 ENUM
3138   BFD_RELOC_ARM_TARGET2
3139 ENUMDOC
3140   This reloc is used for references to RTTI data from exception handling
3141   tables.  The actual definition depends on the target.  It may be a
3142   pc-relative or some form of GOT-indirect relocation.
3143 ENUM
3144   BFD_RELOC_ARM_PREL31
3145 ENUMDOC
3146   31-bit PC relative address.
3147 ENUM
3148   BFD_RELOC_ARM_MOVW
3149 ENUMX
3150   BFD_RELOC_ARM_MOVT
3151 ENUMX
3152   BFD_RELOC_ARM_MOVW_PCREL
3153 ENUMX
3154   BFD_RELOC_ARM_MOVT_PCREL
3155 ENUMX
3156   BFD_RELOC_ARM_THUMB_MOVW
3157 ENUMX
3158   BFD_RELOC_ARM_THUMB_MOVT
3159 ENUMX
3160   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3161 ENUMX
3162   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3163 ENUMDOC
3164   Low and High halfword relocations for MOVW and MOVT instructions.
3165
3166 ENUM
3167   BFD_RELOC_ARM_JUMP_SLOT
3168 ENUMX
3169   BFD_RELOC_ARM_GLOB_DAT
3170 ENUMX
3171   BFD_RELOC_ARM_GOT32
3172 ENUMX
3173   BFD_RELOC_ARM_PLT32
3174 ENUMX
3175   BFD_RELOC_ARM_RELATIVE
3176 ENUMX
3177   BFD_RELOC_ARM_GOTOFF
3178 ENUMX
3179   BFD_RELOC_ARM_GOTPC
3180 ENUMX
3181   BFD_RELOC_ARM_GOT_PREL
3182 ENUMDOC
3183   Relocations for setting up GOTs and PLTs for shared libraries.
3184
3185 ENUM
3186   BFD_RELOC_ARM_TLS_GD32
3187 ENUMX
3188   BFD_RELOC_ARM_TLS_LDO32
3189 ENUMX
3190   BFD_RELOC_ARM_TLS_LDM32
3191 ENUMX
3192   BFD_RELOC_ARM_TLS_DTPOFF32
3193 ENUMX
3194   BFD_RELOC_ARM_TLS_DTPMOD32
3195 ENUMX
3196   BFD_RELOC_ARM_TLS_TPOFF32
3197 ENUMX
3198   BFD_RELOC_ARM_TLS_IE32
3199 ENUMX
3200   BFD_RELOC_ARM_TLS_LE32
3201 ENUMX
3202   BFD_RELOC_ARM_TLS_GOTDESC
3203 ENUMX
3204   BFD_RELOC_ARM_TLS_CALL
3205 ENUMX
3206   BFD_RELOC_ARM_THM_TLS_CALL
3207 ENUMX
3208   BFD_RELOC_ARM_TLS_DESCSEQ
3209 ENUMX
3210   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3211 ENUMX
3212   BFD_RELOC_ARM_TLS_DESC
3213 ENUMDOC
3214   ARM thread-local storage relocations.
3215
3216 ENUM
3217   BFD_RELOC_ARM_ALU_PC_G0_NC
3218 ENUMX
3219   BFD_RELOC_ARM_ALU_PC_G0
3220 ENUMX
3221   BFD_RELOC_ARM_ALU_PC_G1_NC
3222 ENUMX
3223   BFD_RELOC_ARM_ALU_PC_G1
3224 ENUMX
3225   BFD_RELOC_ARM_ALU_PC_G2
3226 ENUMX
3227   BFD_RELOC_ARM_LDR_PC_G0
3228 ENUMX
3229   BFD_RELOC_ARM_LDR_PC_G1
3230 ENUMX
3231   BFD_RELOC_ARM_LDR_PC_G2
3232 ENUMX
3233   BFD_RELOC_ARM_LDRS_PC_G0
3234 ENUMX
3235   BFD_RELOC_ARM_LDRS_PC_G1
3236 ENUMX
3237   BFD_RELOC_ARM_LDRS_PC_G2
3238 ENUMX
3239   BFD_RELOC_ARM_LDC_PC_G0
3240 ENUMX
3241   BFD_RELOC_ARM_LDC_PC_G1
3242 ENUMX
3243   BFD_RELOC_ARM_LDC_PC_G2
3244 ENUMX
3245   BFD_RELOC_ARM_ALU_SB_G0_NC
3246 ENUMX
3247   BFD_RELOC_ARM_ALU_SB_G0
3248 ENUMX
3249   BFD_RELOC_ARM_ALU_SB_G1_NC
3250 ENUMX
3251   BFD_RELOC_ARM_ALU_SB_G1
3252 ENUMX
3253   BFD_RELOC_ARM_ALU_SB_G2
3254 ENUMX
3255   BFD_RELOC_ARM_LDR_SB_G0
3256 ENUMX
3257   BFD_RELOC_ARM_LDR_SB_G1
3258 ENUMX
3259   BFD_RELOC_ARM_LDR_SB_G2
3260 ENUMX
3261   BFD_RELOC_ARM_LDRS_SB_G0
3262 ENUMX
3263   BFD_RELOC_ARM_LDRS_SB_G1
3264 ENUMX
3265   BFD_RELOC_ARM_LDRS_SB_G2
3266 ENUMX
3267   BFD_RELOC_ARM_LDC_SB_G0
3268 ENUMX
3269   BFD_RELOC_ARM_LDC_SB_G1
3270 ENUMX
3271   BFD_RELOC_ARM_LDC_SB_G2
3272 ENUMDOC
3273   ARM group relocations.
3274
3275 ENUM
3276   BFD_RELOC_ARM_V4BX
3277 ENUMDOC
3278   Annotation of BX instructions.
3279
3280 ENUM
3281   BFD_RELOC_ARM_IRELATIVE
3282 ENUMDOC
3283   ARM support for STT_GNU_IFUNC.
3284
3285 ENUM
3286   BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC
3287 ENUMX
3288   BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC
3289 ENUMX
3290   BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC
3291 ENUMX
3292   BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC
3293 ENUMDOC
3294   Thumb1 relocations to support execute-only code.
3295
3296 ENUM
3297   BFD_RELOC_ARM_IMMEDIATE
3298 ENUMX
3299   BFD_RELOC_ARM_ADRL_IMMEDIATE
3300 ENUMX
3301   BFD_RELOC_ARM_T32_IMMEDIATE
3302 ENUMX
3303   BFD_RELOC_ARM_T32_ADD_IMM
3304 ENUMX
3305   BFD_RELOC_ARM_T32_IMM12
3306 ENUMX
3307   BFD_RELOC_ARM_T32_ADD_PC12
3308 ENUMX
3309   BFD_RELOC_ARM_SHIFT_IMM
3310 ENUMX
3311   BFD_RELOC_ARM_SMC
3312 ENUMX
3313   BFD_RELOC_ARM_HVC
3314 ENUMX
3315   BFD_RELOC_ARM_SWI
3316 ENUMX
3317   BFD_RELOC_ARM_MULTI
3318 ENUMX
3319   BFD_RELOC_ARM_CP_OFF_IMM
3320 ENUMX
3321   BFD_RELOC_ARM_CP_OFF_IMM_S2
3322 ENUMX
3323   BFD_RELOC_ARM_T32_CP_OFF_IMM
3324 ENUMX
3325   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3326 ENUMX
3327   BFD_RELOC_ARM_ADR_IMM
3328 ENUMX
3329   BFD_RELOC_ARM_LDR_IMM
3330 ENUMX
3331   BFD_RELOC_ARM_LITERAL
3332 ENUMX
3333   BFD_RELOC_ARM_IN_POOL
3334 ENUMX
3335   BFD_RELOC_ARM_OFFSET_IMM8
3336 ENUMX
3337   BFD_RELOC_ARM_T32_OFFSET_U8
3338 ENUMX
3339   BFD_RELOC_ARM_T32_OFFSET_IMM
3340 ENUMX
3341   BFD_RELOC_ARM_HWLITERAL
3342 ENUMX
3343   BFD_RELOC_ARM_THUMB_ADD
3344 ENUMX
3345   BFD_RELOC_ARM_THUMB_IMM
3346 ENUMX
3347   BFD_RELOC_ARM_THUMB_SHIFT
3348 ENUMDOC
3349   These relocs are only used within the ARM assembler.  They are not
3350   (at present) written to any object files.
3351
3352 ENUM
3353   BFD_RELOC_SH_PCDISP8BY2
3354 ENUMX
3355   BFD_RELOC_SH_PCDISP12BY2
3356 ENUMX
3357   BFD_RELOC_SH_IMM3
3358 ENUMX
3359   BFD_RELOC_SH_IMM3U
3360 ENUMX
3361   BFD_RELOC_SH_DISP12
3362 ENUMX
3363   BFD_RELOC_SH_DISP12BY2
3364 ENUMX
3365   BFD_RELOC_SH_DISP12BY4
3366 ENUMX
3367   BFD_RELOC_SH_DISP12BY8
3368 ENUMX
3369   BFD_RELOC_SH_DISP20
3370 ENUMX
3371   BFD_RELOC_SH_DISP20BY8
3372 ENUMX
3373   BFD_RELOC_SH_IMM4
3374 ENUMX
3375   BFD_RELOC_SH_IMM4BY2
3376 ENUMX
3377   BFD_RELOC_SH_IMM4BY4
3378 ENUMX
3379   BFD_RELOC_SH_IMM8
3380 ENUMX
3381   BFD_RELOC_SH_IMM8BY2
3382 ENUMX
3383   BFD_RELOC_SH_IMM8BY4
3384 ENUMX
3385   BFD_RELOC_SH_PCRELIMM8BY2
3386 ENUMX
3387   BFD_RELOC_SH_PCRELIMM8BY4
3388 ENUMX
3389   BFD_RELOC_SH_SWITCH16
3390 ENUMX
3391   BFD_RELOC_SH_SWITCH32
3392 ENUMX
3393   BFD_RELOC_SH_USES
3394 ENUMX
3395   BFD_RELOC_SH_COUNT
3396 ENUMX
3397   BFD_RELOC_SH_ALIGN
3398 ENUMX
3399   BFD_RELOC_SH_CODE
3400 ENUMX
3401   BFD_RELOC_SH_DATA
3402 ENUMX
3403   BFD_RELOC_SH_LABEL
3404 ENUMX
3405   BFD_RELOC_SH_LOOP_START
3406 ENUMX
3407   BFD_RELOC_SH_LOOP_END
3408 ENUMX
3409   BFD_RELOC_SH_COPY
3410 ENUMX
3411   BFD_RELOC_SH_GLOB_DAT
3412 ENUMX
3413   BFD_RELOC_SH_JMP_SLOT
3414 ENUMX
3415   BFD_RELOC_SH_RELATIVE
3416 ENUMX
3417   BFD_RELOC_SH_GOTPC
3418 ENUMX
3419   BFD_RELOC_SH_GOT_LOW16
3420 ENUMX
3421   BFD_RELOC_SH_GOT_MEDLOW16
3422 ENUMX
3423   BFD_RELOC_SH_GOT_MEDHI16
3424 ENUMX
3425   BFD_RELOC_SH_GOT_HI16
3426 ENUMX
3427   BFD_RELOC_SH_GOTPLT_LOW16
3428 ENUMX
3429   BFD_RELOC_SH_GOTPLT_MEDLOW16
3430 ENUMX
3431   BFD_RELOC_SH_GOTPLT_MEDHI16
3432 ENUMX
3433   BFD_RELOC_SH_GOTPLT_HI16
3434 ENUMX
3435   BFD_RELOC_SH_PLT_LOW16
3436 ENUMX
3437   BFD_RELOC_SH_PLT_MEDLOW16
3438 ENUMX
3439   BFD_RELOC_SH_PLT_MEDHI16
3440 ENUMX
3441   BFD_RELOC_SH_PLT_HI16
3442 ENUMX
3443   BFD_RELOC_SH_GOTOFF_LOW16
3444 ENUMX
3445   BFD_RELOC_SH_GOTOFF_MEDLOW16
3446 ENUMX
3447   BFD_RELOC_SH_GOTOFF_MEDHI16
3448 ENUMX
3449   BFD_RELOC_SH_GOTOFF_HI16
3450 ENUMX
3451   BFD_RELOC_SH_GOTPC_LOW16
3452 ENUMX
3453   BFD_RELOC_SH_GOTPC_MEDLOW16
3454 ENUMX
3455   BFD_RELOC_SH_GOTPC_MEDHI16
3456 ENUMX
3457   BFD_RELOC_SH_GOTPC_HI16
3458 ENUMX
3459   BFD_RELOC_SH_COPY64
3460 ENUMX
3461   BFD_RELOC_SH_GLOB_DAT64
3462 ENUMX
3463   BFD_RELOC_SH_JMP_SLOT64
3464 ENUMX
3465   BFD_RELOC_SH_RELATIVE64
3466 ENUMX
3467   BFD_RELOC_SH_GOT10BY4
3468 ENUMX
3469   BFD_RELOC_SH_GOT10BY8
3470 ENUMX
3471   BFD_RELOC_SH_GOTPLT10BY4
3472 ENUMX
3473   BFD_RELOC_SH_GOTPLT10BY8
3474 ENUMX
3475   BFD_RELOC_SH_GOTPLT32
3476 ENUMX
3477   BFD_RELOC_SH_SHMEDIA_CODE
3478 ENUMX
3479   BFD_RELOC_SH_IMMU5
3480 ENUMX
3481   BFD_RELOC_SH_IMMS6
3482 ENUMX
3483   BFD_RELOC_SH_IMMS6BY32
3484 ENUMX
3485   BFD_RELOC_SH_IMMU6
3486 ENUMX
3487   BFD_RELOC_SH_IMMS10
3488 ENUMX
3489   BFD_RELOC_SH_IMMS10BY2
3490 ENUMX
3491   BFD_RELOC_SH_IMMS10BY4
3492 ENUMX
3493   BFD_RELOC_SH_IMMS10BY8
3494 ENUMX
3495   BFD_RELOC_SH_IMMS16
3496 ENUMX
3497   BFD_RELOC_SH_IMMU16
3498 ENUMX
3499   BFD_RELOC_SH_IMM_LOW16
3500 ENUMX
3501   BFD_RELOC_SH_IMM_LOW16_PCREL
3502 ENUMX
3503   BFD_RELOC_SH_IMM_MEDLOW16
3504 ENUMX
3505   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3506 ENUMX
3507   BFD_RELOC_SH_IMM_MEDHI16
3508 ENUMX
3509   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3510 ENUMX
3511   BFD_RELOC_SH_IMM_HI16
3512 ENUMX
3513   BFD_RELOC_SH_IMM_HI16_PCREL
3514 ENUMX
3515   BFD_RELOC_SH_PT_16
3516 ENUMX
3517   BFD_RELOC_SH_TLS_GD_32
3518 ENUMX
3519   BFD_RELOC_SH_TLS_LD_32
3520 ENUMX
3521   BFD_RELOC_SH_TLS_LDO_32
3522 ENUMX
3523   BFD_RELOC_SH_TLS_IE_32
3524 ENUMX
3525   BFD_RELOC_SH_TLS_LE_32
3526 ENUMX
3527   BFD_RELOC_SH_TLS_DTPMOD32
3528 ENUMX
3529   BFD_RELOC_SH_TLS_DTPOFF32
3530 ENUMX
3531   BFD_RELOC_SH_TLS_TPOFF32
3532 ENUMX
3533   BFD_RELOC_SH_GOT20
3534 ENUMX
3535   BFD_RELOC_SH_GOTOFF20
3536 ENUMX
3537   BFD_RELOC_SH_GOTFUNCDESC
3538 ENUMX
3539   BFD_RELOC_SH_GOTFUNCDESC20
3540 ENUMX
3541   BFD_RELOC_SH_GOTOFFFUNCDESC
3542 ENUMX
3543   BFD_RELOC_SH_GOTOFFFUNCDESC20
3544 ENUMX
3545   BFD_RELOC_SH_FUNCDESC
3546 ENUMDOC
3547   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3548
3549 ENUM
3550   BFD_RELOC_ARC_NONE
3551 ENUMX
3552   BFD_RELOC_ARC_8
3553 ENUMX
3554   BFD_RELOC_ARC_16
3555 ENUMX
3556   BFD_RELOC_ARC_24
3557 ENUMX
3558   BFD_RELOC_ARC_32
3559 ENUMX
3560   BFD_RELOC_ARC_N8
3561 ENUMX
3562   BFD_RELOC_ARC_N16
3563 ENUMX
3564   BFD_RELOC_ARC_N24
3565 ENUMX
3566   BFD_RELOC_ARC_N32
3567 ENUMX
3568   BFD_RELOC_ARC_SDA
3569 ENUMX
3570   BFD_RELOC_ARC_SECTOFF
3571 ENUMX
3572   BFD_RELOC_ARC_S21H_PCREL
3573 ENUMX
3574   BFD_RELOC_ARC_S21W_PCREL
3575 ENUMX
3576   BFD_RELOC_ARC_S25H_PCREL
3577 ENUMX
3578   BFD_RELOC_ARC_S25W_PCREL
3579 ENUMX
3580   BFD_RELOC_ARC_SDA32
3581 ENUMX
3582   BFD_RELOC_ARC_SDA_LDST
3583 ENUMX
3584   BFD_RELOC_ARC_SDA_LDST1
3585 ENUMX
3586   BFD_RELOC_ARC_SDA_LDST2
3587 ENUMX
3588   BFD_RELOC_ARC_SDA16_LD
3589 ENUMX
3590   BFD_RELOC_ARC_SDA16_LD1
3591 ENUMX
3592   BFD_RELOC_ARC_SDA16_LD2
3593 ENUMX
3594   BFD_RELOC_ARC_S13_PCREL
3595 ENUMX
3596   BFD_RELOC_ARC_W
3597 ENUMX
3598   BFD_RELOC_ARC_32_ME
3599 ENUMX
3600   BFD_RELOC_ARC_32_ME_S
3601 ENUMX
3602   BFD_RELOC_ARC_N32_ME
3603 ENUMX
3604   BFD_RELOC_ARC_SECTOFF_ME
3605 ENUMX
3606   BFD_RELOC_ARC_SDA32_ME
3607 ENUMX
3608   BFD_RELOC_ARC_W_ME
3609 ENUMX
3610   BFD_RELOC_AC_SECTOFF_U8
3611 ENUMX
3612   BFD_RELOC_AC_SECTOFF_U8_1
3613 ENUMX
3614   BFD_RELOC_AC_SECTOFF_U8_2
3615 ENUMX
3616   BFD_RELOC_AC_SECTOFF_S9
3617 ENUMX
3618   BFD_RELOC_AC_SECTOFF_S9_1
3619 ENUMX
3620   BFD_RELOC_AC_SECTOFF_S9_2
3621 ENUMX
3622   BFD_RELOC_ARC_SECTOFF_ME_1
3623 ENUMX
3624   BFD_RELOC_ARC_SECTOFF_ME_2
3625 ENUMX
3626   BFD_RELOC_ARC_SECTOFF_1
3627 ENUMX
3628   BFD_RELOC_ARC_SECTOFF_2
3629 ENUMX
3630   BFD_RELOC_ARC_SDA_12
3631 ENUMX
3632   BFD_RELOC_ARC_SDA16_ST2
3633 ENUMX
3634   BFD_RELOC_ARC_32_PCREL
3635 ENUMX
3636   BFD_RELOC_ARC_PC32
3637 ENUMX
3638   BFD_RELOC_ARC_GOT32
3639 ENUMX
3640   BFD_RELOC_ARC_GOTPC32
3641 ENUMX
3642   BFD_RELOC_ARC_PLT32
3643 ENUMX
3644   BFD_RELOC_ARC_COPY
3645 ENUMX
3646   BFD_RELOC_ARC_GLOB_DAT
3647 ENUMX
3648   BFD_RELOC_ARC_JMP_SLOT
3649 ENUMX
3650   BFD_RELOC_ARC_RELATIVE
3651 ENUMX
3652   BFD_RELOC_ARC_GOTOFF
3653 ENUMX
3654   BFD_RELOC_ARC_GOTPC
3655 ENUMX
3656   BFD_RELOC_ARC_S21W_PCREL_PLT
3657 ENUMX
3658   BFD_RELOC_ARC_S25H_PCREL_PLT
3659 ENUMX
3660   BFD_RELOC_ARC_TLS_DTPMOD
3661 ENUMX
3662   BFD_RELOC_ARC_TLS_TPOFF
3663 ENUMX
3664   BFD_RELOC_ARC_TLS_GD_GOT
3665 ENUMX
3666   BFD_RELOC_ARC_TLS_GD_LD
3667 ENUMX
3668   BFD_RELOC_ARC_TLS_GD_CALL
3669 ENUMX
3670   BFD_RELOC_ARC_TLS_IE_GOT
3671 ENUMX
3672   BFD_RELOC_ARC_TLS_DTPOFF
3673 ENUMX
3674   BFD_RELOC_ARC_TLS_DTPOFF_S9
3675 ENUMX
3676   BFD_RELOC_ARC_TLS_LE_S9
3677 ENUMX
3678   BFD_RELOC_ARC_TLS_LE_32
3679 ENUMX
3680   BFD_RELOC_ARC_S25W_PCREL_PLT
3681 ENUMX
3682   BFD_RELOC_ARC_S21H_PCREL_PLT
3683 ENUMX
3684   BFD_RELOC_ARC_NPS_CMEM16
3685 ENUMDOC
3686   ARC relocs.
3687
3688 ENUM
3689   BFD_RELOC_BFIN_16_IMM
3690 ENUMDOC
3691   ADI Blackfin 16 bit immediate absolute reloc.
3692 ENUM
3693   BFD_RELOC_BFIN_16_HIGH
3694 ENUMDOC
3695   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3696 ENUM
3697   BFD_RELOC_BFIN_4_PCREL
3698 ENUMDOC
3699   ADI Blackfin 'a' part of LSETUP.
3700 ENUM
3701   BFD_RELOC_BFIN_5_PCREL
3702 ENUMDOC
3703   ADI Blackfin.
3704 ENUM
3705   BFD_RELOC_BFIN_16_LOW
3706 ENUMDOC
3707   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3708 ENUM
3709   BFD_RELOC_BFIN_10_PCREL
3710 ENUMDOC
3711   ADI Blackfin.
3712 ENUM
3713   BFD_RELOC_BFIN_11_PCREL
3714 ENUMDOC
3715   ADI Blackfin 'b' part of LSETUP.
3716 ENUM
3717   BFD_RELOC_BFIN_12_PCREL_JUMP
3718 ENUMDOC
3719   ADI Blackfin.
3720 ENUM
3721   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3722 ENUMDOC
3723   ADI Blackfin Short jump, pcrel.
3724 ENUM
3725   BFD_RELOC_BFIN_24_PCREL_CALL_X
3726 ENUMDOC
3727   ADI Blackfin Call.x not implemented.
3728 ENUM
3729   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3730 ENUMDOC
3731   ADI Blackfin Long Jump pcrel.
3732 ENUM
3733   BFD_RELOC_BFIN_GOT17M4
3734 ENUMX
3735   BFD_RELOC_BFIN_GOTHI
3736 ENUMX
3737   BFD_RELOC_BFIN_GOTLO
3738 ENUMX
3739   BFD_RELOC_BFIN_FUNCDESC
3740 ENUMX
3741   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3742 ENUMX
3743   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3744 ENUMX
3745   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3746 ENUMX
3747   BFD_RELOC_BFIN_FUNCDESC_VALUE
3748 ENUMX
3749   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3750 ENUMX
3751   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3752 ENUMX
3753   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3754 ENUMX
3755   BFD_RELOC_BFIN_GOTOFF17M4
3756 ENUMX
3757   BFD_RELOC_BFIN_GOTOFFHI
3758 ENUMX
3759   BFD_RELOC_BFIN_GOTOFFLO
3760 ENUMDOC
3761   ADI Blackfin FD-PIC relocations.
3762 ENUM
3763   BFD_RELOC_BFIN_GOT
3764 ENUMDOC
3765   ADI Blackfin GOT relocation.
3766 ENUM
3767   BFD_RELOC_BFIN_PLTPC
3768 ENUMDOC
3769   ADI Blackfin PLTPC relocation.
3770 ENUM
3771   BFD_ARELOC_BFIN_PUSH
3772 ENUMDOC
3773   ADI Blackfin arithmetic relocation.
3774 ENUM
3775   BFD_ARELOC_BFIN_CONST
3776 ENUMDOC
3777   ADI Blackfin arithmetic relocation.
3778 ENUM
3779   BFD_ARELOC_BFIN_ADD
3780 ENUMDOC
3781   ADI Blackfin arithmetic relocation.
3782 ENUM
3783   BFD_ARELOC_BFIN_SUB
3784 ENUMDOC
3785   ADI Blackfin arithmetic relocation.
3786 ENUM
3787   BFD_ARELOC_BFIN_MULT
3788 ENUMDOC
3789   ADI Blackfin arithmetic relocation.
3790 ENUM
3791   BFD_ARELOC_BFIN_DIV
3792 ENUMDOC
3793   ADI Blackfin arithmetic relocation.
3794 ENUM
3795   BFD_ARELOC_BFIN_MOD
3796 ENUMDOC
3797   ADI Blackfin arithmetic relocation.
3798 ENUM
3799   BFD_ARELOC_BFIN_LSHIFT
3800 ENUMDOC
3801   ADI Blackfin arithmetic relocation.
3802 ENUM
3803   BFD_ARELOC_BFIN_RSHIFT
3804 ENUMDOC
3805   ADI Blackfin arithmetic relocation.
3806 ENUM
3807   BFD_ARELOC_BFIN_AND
3808 ENUMDOC
3809   ADI Blackfin arithmetic relocation.
3810 ENUM
3811   BFD_ARELOC_BFIN_OR
3812 ENUMDOC
3813   ADI Blackfin arithmetic relocation.
3814 ENUM
3815   BFD_ARELOC_BFIN_XOR
3816 ENUMDOC
3817   ADI Blackfin arithmetic relocation.
3818 ENUM
3819   BFD_ARELOC_BFIN_LAND
3820 ENUMDOC
3821   ADI Blackfin arithmetic relocation.
3822 ENUM
3823   BFD_ARELOC_BFIN_LOR
3824 ENUMDOC
3825   ADI Blackfin arithmetic relocation.
3826 ENUM
3827   BFD_ARELOC_BFIN_LEN
3828 ENUMDOC
3829   ADI Blackfin arithmetic relocation.
3830 ENUM
3831   BFD_ARELOC_BFIN_NEG
3832 ENUMDOC
3833   ADI Blackfin arithmetic relocation.
3834 ENUM
3835   BFD_ARELOC_BFIN_COMP
3836 ENUMDOC
3837   ADI Blackfin arithmetic relocation.
3838 ENUM
3839   BFD_ARELOC_BFIN_PAGE
3840 ENUMDOC
3841   ADI Blackfin arithmetic relocation.
3842 ENUM
3843   BFD_ARELOC_BFIN_HWPAGE
3844 ENUMDOC
3845   ADI Blackfin arithmetic relocation.
3846 ENUM
3847   BFD_ARELOC_BFIN_ADDR
3848 ENUMDOC
3849   ADI Blackfin arithmetic relocation.
3850
3851 ENUM
3852   BFD_RELOC_D10V_10_PCREL_R
3853 ENUMDOC
3854   Mitsubishi D10V relocs.
3855   This is a 10-bit reloc with the right 2 bits
3856   assumed to be 0.
3857 ENUM
3858   BFD_RELOC_D10V_10_PCREL_L
3859 ENUMDOC
3860   Mitsubishi D10V relocs.
3861   This is a 10-bit reloc with the right 2 bits
3862   assumed to be 0.  This is the same as the previous reloc
3863   except it is in the left container, i.e.,
3864   shifted left 15 bits.
3865 ENUM
3866   BFD_RELOC_D10V_18
3867 ENUMDOC
3868   This is an 18-bit reloc with the right 2 bits
3869   assumed to be 0.
3870 ENUM
3871   BFD_RELOC_D10V_18_PCREL
3872 ENUMDOC
3873   This is an 18-bit reloc with the right 2 bits
3874   assumed to be 0.
3875
3876 ENUM
3877   BFD_RELOC_D30V_6
3878 ENUMDOC
3879   Mitsubishi D30V relocs.
3880   This is a 6-bit absolute reloc.
3881 ENUM
3882   BFD_RELOC_D30V_9_PCREL
3883 ENUMDOC
3884   This is a 6-bit pc-relative reloc with
3885   the right 3 bits assumed to be 0.
3886 ENUM
3887   BFD_RELOC_D30V_9_PCREL_R
3888 ENUMDOC
3889   This is a 6-bit pc-relative reloc with
3890   the right 3 bits assumed to be 0. Same
3891   as the previous reloc but on the right side
3892   of the container.
3893 ENUM
3894   BFD_RELOC_D30V_15
3895 ENUMDOC
3896   This is a 12-bit absolute reloc with the
3897   right 3 bitsassumed to be 0.
3898 ENUM
3899   BFD_RELOC_D30V_15_PCREL
3900 ENUMDOC
3901   This is a 12-bit pc-relative reloc with
3902   the right 3 bits assumed to be 0.
3903 ENUM
3904   BFD_RELOC_D30V_15_PCREL_R
3905 ENUMDOC
3906   This is a 12-bit pc-relative reloc with
3907   the right 3 bits assumed to be 0. Same
3908   as the previous reloc but on the right side
3909   of the container.
3910 ENUM
3911   BFD_RELOC_D30V_21
3912 ENUMDOC
3913   This is an 18-bit absolute reloc with
3914   the right 3 bits assumed to be 0.
3915 ENUM
3916   BFD_RELOC_D30V_21_PCREL
3917 ENUMDOC
3918   This is an 18-bit pc-relative reloc with
3919   the right 3 bits assumed to be 0.
3920 ENUM
3921   BFD_RELOC_D30V_21_PCREL_R
3922 ENUMDOC
3923   This is an 18-bit pc-relative reloc with
3924   the right 3 bits assumed to be 0. Same
3925   as the previous reloc but on the right side
3926   of the container.
3927 ENUM
3928   BFD_RELOC_D30V_32
3929 ENUMDOC
3930   This is a 32-bit absolute reloc.
3931 ENUM
3932   BFD_RELOC_D30V_32_PCREL
3933 ENUMDOC
3934   This is a 32-bit pc-relative reloc.
3935
3936 ENUM
3937   BFD_RELOC_DLX_HI16_S
3938 ENUMDOC
3939   DLX relocs
3940 ENUM
3941   BFD_RELOC_DLX_LO16
3942 ENUMDOC
3943   DLX relocs
3944 ENUM
3945   BFD_RELOC_DLX_JMP26
3946 ENUMDOC
3947   DLX relocs
3948
3949 ENUM
3950   BFD_RELOC_M32C_HI8
3951 ENUMX
3952   BFD_RELOC_M32C_RL_JUMP
3953 ENUMX
3954   BFD_RELOC_M32C_RL_1ADDR
3955 ENUMX
3956   BFD_RELOC_M32C_RL_2ADDR
3957 ENUMDOC
3958   Renesas M16C/M32C Relocations.
3959
3960 ENUM
3961   BFD_RELOC_M32R_24
3962 ENUMDOC
3963   Renesas M32R (formerly Mitsubishi M32R) relocs.
3964   This is a 24 bit absolute address.
3965 ENUM
3966   BFD_RELOC_M32R_10_PCREL
3967 ENUMDOC
3968   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3969 ENUM
3970   BFD_RELOC_M32R_18_PCREL
3971 ENUMDOC
3972   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3973 ENUM
3974   BFD_RELOC_M32R_26_PCREL
3975 ENUMDOC
3976   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3977 ENUM
3978   BFD_RELOC_M32R_HI16_ULO
3979 ENUMDOC
3980   This is a 16-bit reloc containing the high 16 bits of an address
3981   used when the lower 16 bits are treated as unsigned.
3982 ENUM
3983   BFD_RELOC_M32R_HI16_SLO
3984 ENUMDOC
3985   This is a 16-bit reloc containing the high 16 bits of an address
3986   used when the lower 16 bits are treated as signed.
3987 ENUM
3988   BFD_RELOC_M32R_LO16
3989 ENUMDOC
3990   This is a 16-bit reloc containing the lower 16 bits of an address.
3991 ENUM
3992   BFD_RELOC_M32R_SDA16
3993 ENUMDOC
3994   This is a 16-bit reloc containing the small data area offset for use in
3995   add3, load, and store instructions.
3996 ENUM
3997   BFD_RELOC_M32R_GOT24
3998 ENUMX
3999   BFD_RELOC_M32R_26_PLTREL
4000 ENUMX
4001   BFD_RELOC_M32R_COPY
4002 ENUMX
4003   BFD_RELOC_M32R_GLOB_DAT
4004 ENUMX
4005   BFD_RELOC_M32R_JMP_SLOT
4006 ENUMX
4007   BFD_RELOC_M32R_RELATIVE
4008 ENUMX
4009   BFD_RELOC_M32R_GOTOFF
4010 ENUMX
4011   BFD_RELOC_M32R_GOTOFF_HI_ULO
4012 ENUMX
4013   BFD_RELOC_M32R_GOTOFF_HI_SLO
4014 ENUMX
4015   BFD_RELOC_M32R_GOTOFF_LO
4016 ENUMX
4017   BFD_RELOC_M32R_GOTPC24
4018 ENUMX
4019   BFD_RELOC_M32R_GOT16_HI_ULO
4020 ENUMX
4021   BFD_RELOC_M32R_GOT16_HI_SLO
4022 ENUMX
4023   BFD_RELOC_M32R_GOT16_LO
4024 ENUMX
4025   BFD_RELOC_M32R_GOTPC_HI_ULO
4026 ENUMX
4027   BFD_RELOC_M32R_GOTPC_HI_SLO
4028 ENUMX
4029   BFD_RELOC_M32R_GOTPC_LO
4030 ENUMDOC
4031   For PIC.
4032
4033
4034 ENUM
4035   BFD_RELOC_NDS32_20
4036 ENUMDOC
4037   NDS32 relocs.
4038   This is a 20 bit absolute address.
4039 ENUM
4040   BFD_RELOC_NDS32_9_PCREL
4041 ENUMDOC
4042   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4043 ENUM
4044   BFD_RELOC_NDS32_WORD_9_PCREL
4045 ENUMDOC
4046   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4047 ENUM
4048   BFD_RELOC_NDS32_15_PCREL
4049 ENUMDOC
4050   This is an 15-bit reloc with the right 1 bit assumed to be 0.
4051 ENUM
4052   BFD_RELOC_NDS32_17_PCREL
4053 ENUMDOC
4054   This is an 17-bit reloc with the right 1 bit assumed to be 0.
4055 ENUM
4056   BFD_RELOC_NDS32_25_PCREL
4057 ENUMDOC
4058   This is a 25-bit reloc with the right 1 bit assumed to be 0.
4059 ENUM
4060   BFD_RELOC_NDS32_HI20
4061 ENUMDOC
4062   This is a 20-bit reloc containing the high 20 bits of an address
4063   used with the lower 12 bits
4064 ENUM
4065   BFD_RELOC_NDS32_LO12S3
4066 ENUMDOC
4067   This is a 12-bit reloc containing the lower 12 bits of an address
4068   then shift right by 3. This is used with ldi,sdi...
4069 ENUM
4070   BFD_RELOC_NDS32_LO12S2
4071 ENUMDOC
4072   This is a 12-bit reloc containing the lower 12 bits of an address
4073   then shift left by 2. This is used with lwi,swi...
4074 ENUM
4075   BFD_RELOC_NDS32_LO12S1
4076 ENUMDOC
4077   This is a 12-bit reloc containing the lower 12 bits of an address
4078   then shift left by 1. This is used with lhi,shi...
4079 ENUM
4080   BFD_RELOC_NDS32_LO12S0
4081 ENUMDOC
4082   This is a 12-bit reloc containing the lower 12 bits of an address
4083   then shift left by 0. This is used with lbisbi...
4084 ENUM
4085   BFD_RELOC_NDS32_LO12S0_ORI
4086 ENUMDOC
4087   This is a 12-bit reloc containing the lower 12 bits of an address
4088   then shift left by 0. This is only used with branch relaxations
4089 ENUM
4090   BFD_RELOC_NDS32_SDA15S3
4091 ENUMDOC
4092   This is a 15-bit reloc containing the small data area 18-bit signed offset
4093   and shift left by 3 for use in ldi, sdi...
4094 ENUM
4095   BFD_RELOC_NDS32_SDA15S2
4096 ENUMDOC
4097   This is a 15-bit reloc containing the small data area 17-bit signed offset
4098   and shift left by 2 for use in lwi, swi...
4099 ENUM
4100   BFD_RELOC_NDS32_SDA15S1
4101 ENUMDOC
4102   This is a 15-bit reloc containing the small data area 16-bit signed offset
4103   and shift left by 1 for use in lhi, shi...
4104 ENUM
4105   BFD_RELOC_NDS32_SDA15S0
4106 ENUMDOC
4107   This is a 15-bit reloc containing the small data area 15-bit signed offset
4108   and shift left by 0 for use in lbi, sbi...
4109 ENUM
4110   BFD_RELOC_NDS32_SDA16S3
4111 ENUMDOC
4112   This is a 16-bit reloc containing the small data area 16-bit signed offset
4113   and shift left by 3
4114 ENUM
4115   BFD_RELOC_NDS32_SDA17S2
4116 ENUMDOC
4117   This is a 17-bit reloc containing the small data area 17-bit signed offset
4118   and shift left by 2 for use in lwi.gp, swi.gp...
4119 ENUM
4120   BFD_RELOC_NDS32_SDA18S1
4121 ENUMDOC
4122   This is a 18-bit reloc containing the small data area 18-bit signed offset
4123   and shift left by 1 for use in lhi.gp, shi.gp...
4124 ENUM
4125   BFD_RELOC_NDS32_SDA19S0
4126 ENUMDOC
4127   This is a 19-bit reloc containing the small data area 19-bit signed offset
4128   and shift left by 0 for use in lbi.gp, sbi.gp...
4129 ENUM
4130   BFD_RELOC_NDS32_GOT20
4131 ENUMX
4132   BFD_RELOC_NDS32_9_PLTREL
4133 ENUMX
4134   BFD_RELOC_NDS32_25_PLTREL
4135 ENUMX
4136   BFD_RELOC_NDS32_COPY
4137 ENUMX
4138   BFD_RELOC_NDS32_GLOB_DAT
4139 ENUMX
4140   BFD_RELOC_NDS32_JMP_SLOT
4141 ENUMX
4142   BFD_RELOC_NDS32_RELATIVE
4143 ENUMX
4144   BFD_RELOC_NDS32_GOTOFF
4145 ENUMX
4146   BFD_RELOC_NDS32_GOTOFF_HI20
4147 ENUMX
4148   BFD_RELOC_NDS32_GOTOFF_LO12
4149 ENUMX
4150   BFD_RELOC_NDS32_GOTPC20
4151 ENUMX
4152   BFD_RELOC_NDS32_GOT_HI20
4153 ENUMX
4154   BFD_RELOC_NDS32_GOT_LO12
4155 ENUMX
4156   BFD_RELOC_NDS32_GOTPC_HI20
4157 ENUMX
4158   BFD_RELOC_NDS32_GOTPC_LO12
4159 ENUMDOC
4160   for PIC
4161 ENUM
4162   BFD_RELOC_NDS32_INSN16
4163 ENUMX
4164   BFD_RELOC_NDS32_LABEL
4165 ENUMX
4166   BFD_RELOC_NDS32_LONGCALL1
4167 ENUMX
4168   BFD_RELOC_NDS32_LONGCALL2
4169 ENUMX
4170   BFD_RELOC_NDS32_LONGCALL3
4171 ENUMX
4172   BFD_RELOC_NDS32_LONGJUMP1
4173 ENUMX
4174   BFD_RELOC_NDS32_LONGJUMP2
4175 ENUMX
4176   BFD_RELOC_NDS32_LONGJUMP3
4177 ENUMX
4178   BFD_RELOC_NDS32_LOADSTORE
4179 ENUMX
4180   BFD_RELOC_NDS32_9_FIXED
4181 ENUMX
4182   BFD_RELOC_NDS32_15_FIXED
4183 ENUMX
4184   BFD_RELOC_NDS32_17_FIXED
4185 ENUMX
4186   BFD_RELOC_NDS32_25_FIXED
4187 ENUMX
4188   BFD_RELOC_NDS32_LONGCALL4
4189 ENUMX
4190   BFD_RELOC_NDS32_LONGCALL5
4191 ENUMX
4192   BFD_RELOC_NDS32_LONGCALL6
4193 ENUMX
4194   BFD_RELOC_NDS32_LONGJUMP4
4195 ENUMX
4196   BFD_RELOC_NDS32_LONGJUMP5
4197 ENUMX
4198   BFD_RELOC_NDS32_LONGJUMP6
4199 ENUMX
4200   BFD_RELOC_NDS32_LONGJUMP7
4201 ENUMDOC
4202   for relax
4203 ENUM
4204   BFD_RELOC_NDS32_PLTREL_HI20
4205 ENUMX
4206   BFD_RELOC_NDS32_PLTREL_LO12
4207 ENUMX
4208   BFD_RELOC_NDS32_PLT_GOTREL_HI20
4209 ENUMX
4210   BFD_RELOC_NDS32_PLT_GOTREL_LO12
4211 ENUMDOC
4212   for PIC
4213 ENUM
4214   BFD_RELOC_NDS32_SDA12S2_DP
4215 ENUMX
4216   BFD_RELOC_NDS32_SDA12S2_SP
4217 ENUMX
4218   BFD_RELOC_NDS32_LO12S2_DP
4219 ENUMX
4220   BFD_RELOC_NDS32_LO12S2_SP
4221 ENUMDOC
4222   for floating point
4223 ENUM
4224   BFD_RELOC_NDS32_DWARF2_OP1
4225 ENUMX
4226   BFD_RELOC_NDS32_DWARF2_OP2
4227 ENUMX
4228   BFD_RELOC_NDS32_DWARF2_LEB
4229 ENUMDOC
4230   for dwarf2 debug_line.
4231 ENUM
4232   BFD_RELOC_NDS32_UPDATE_TA
4233 ENUMDOC
4234   for eliminate 16-bit instructions
4235 ENUM
4236   BFD_RELOC_NDS32_PLT_GOTREL_LO20
4237 ENUMX
4238   BFD_RELOC_NDS32_PLT_GOTREL_LO15
4239 ENUMX
4240   BFD_RELOC_NDS32_PLT_GOTREL_LO19
4241 ENUMX
4242   BFD_RELOC_NDS32_GOT_LO15
4243 ENUMX
4244   BFD_RELOC_NDS32_GOT_LO19
4245 ENUMX
4246   BFD_RELOC_NDS32_GOTOFF_LO15
4247 ENUMX
4248   BFD_RELOC_NDS32_GOTOFF_LO19
4249 ENUMX
4250   BFD_RELOC_NDS32_GOT15S2
4251 ENUMX
4252   BFD_RELOC_NDS32_GOT17S2
4253 ENUMDOC
4254   for PIC object relaxation
4255 ENUM
4256   BFD_RELOC_NDS32_5
4257 ENUMDOC
4258   NDS32 relocs.
4259   This is a 5 bit absolute address.
4260 ENUM
4261   BFD_RELOC_NDS32_10_UPCREL
4262 ENUMDOC
4263   This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4264 ENUM
4265   BFD_RELOC_NDS32_SDA_FP7U2_RELA
4266 ENUMDOC
4267   If fp were omitted, fp can used as another gp.
4268 ENUM
4269   BFD_RELOC_NDS32_RELAX_ENTRY
4270 ENUMX
4271   BFD_RELOC_NDS32_GOT_SUFF
4272 ENUMX
4273   BFD_RELOC_NDS32_GOTOFF_SUFF
4274 ENUMX
4275   BFD_RELOC_NDS32_PLT_GOT_SUFF
4276 ENUMX
4277   BFD_RELOC_NDS32_MULCALL_SUFF
4278 ENUMX
4279   BFD_RELOC_NDS32_PTR
4280 ENUMX
4281   BFD_RELOC_NDS32_PTR_COUNT
4282 ENUMX
4283   BFD_RELOC_NDS32_PTR_RESOLVED
4284 ENUMX
4285   BFD_RELOC_NDS32_PLTBLOCK
4286 ENUMX
4287   BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4288 ENUMX
4289   BFD_RELOC_NDS32_RELAX_REGION_END
4290 ENUMX
4291   BFD_RELOC_NDS32_MINUEND
4292 ENUMX
4293   BFD_RELOC_NDS32_SUBTRAHEND
4294 ENUMX
4295   BFD_RELOC_NDS32_DIFF8
4296 ENUMX
4297   BFD_RELOC_NDS32_DIFF16
4298 ENUMX
4299   BFD_RELOC_NDS32_DIFF32
4300 ENUMX
4301   BFD_RELOC_NDS32_DIFF_ULEB128
4302 ENUMX
4303   BFD_RELOC_NDS32_EMPTY
4304 ENUMDOC
4305   relaxation relative relocation types
4306 ENUM
4307   BFD_RELOC_NDS32_25_ABS
4308 ENUMDOC
4309   This is a 25 bit absolute address.
4310 ENUM
4311   BFD_RELOC_NDS32_DATA
4312 ENUMX
4313   BFD_RELOC_NDS32_TRAN
4314 ENUMX
4315   BFD_RELOC_NDS32_17IFC_PCREL
4316 ENUMX
4317   BFD_RELOC_NDS32_10IFCU_PCREL
4318 ENUMDOC
4319   For ex9 and ifc using.
4320 ENUM
4321   BFD_RELOC_NDS32_TPOFF
4322 ENUMX
4323   BFD_RELOC_NDS32_TLS_LE_HI20
4324 ENUMX
4325   BFD_RELOC_NDS32_TLS_LE_LO12
4326 ENUMX
4327   BFD_RELOC_NDS32_TLS_LE_ADD
4328 ENUMX
4329   BFD_RELOC_NDS32_TLS_LE_LS
4330 ENUMX
4331   BFD_RELOC_NDS32_GOTTPOFF
4332 ENUMX
4333   BFD_RELOC_NDS32_TLS_IE_HI20
4334 ENUMX
4335   BFD_RELOC_NDS32_TLS_IE_LO12S2
4336 ENUMX
4337   BFD_RELOC_NDS32_TLS_TPOFF
4338 ENUMX
4339   BFD_RELOC_NDS32_TLS_LE_20
4340 ENUMX
4341   BFD_RELOC_NDS32_TLS_LE_15S0
4342 ENUMX
4343   BFD_RELOC_NDS32_TLS_LE_15S1
4344 ENUMX
4345   BFD_RELOC_NDS32_TLS_LE_15S2
4346 ENUMDOC
4347   For TLS.
4348
4349
4350 ENUM
4351   BFD_RELOC_V850_9_PCREL
4352 ENUMDOC
4353   This is a 9-bit reloc
4354 ENUM
4355   BFD_RELOC_V850_22_PCREL
4356 ENUMDOC
4357   This is a 22-bit reloc
4358
4359 ENUM
4360   BFD_RELOC_V850_SDA_16_16_OFFSET
4361 ENUMDOC
4362   This is a 16 bit offset from the short data area pointer.
4363 ENUM
4364   BFD_RELOC_V850_SDA_15_16_OFFSET
4365 ENUMDOC
4366   This is a 16 bit offset (of which only 15 bits are used) from the
4367   short data area pointer.
4368 ENUM
4369   BFD_RELOC_V850_ZDA_16_16_OFFSET
4370 ENUMDOC
4371   This is a 16 bit offset from the zero data area pointer.
4372 ENUM
4373   BFD_RELOC_V850_ZDA_15_16_OFFSET
4374 ENUMDOC
4375   This is a 16 bit offset (of which only 15 bits are used) from the
4376   zero data area pointer.
4377 ENUM
4378   BFD_RELOC_V850_TDA_6_8_OFFSET
4379 ENUMDOC
4380   This is an 8 bit offset (of which only 6 bits are used) from the
4381   tiny data area pointer.
4382 ENUM
4383   BFD_RELOC_V850_TDA_7_8_OFFSET
4384 ENUMDOC
4385   This is an 8bit offset (of which only 7 bits are used) from the tiny
4386   data area pointer.
4387 ENUM
4388   BFD_RELOC_V850_TDA_7_7_OFFSET
4389 ENUMDOC
4390   This is a 7 bit offset from the tiny data area pointer.
4391 ENUM
4392   BFD_RELOC_V850_TDA_16_16_OFFSET
4393 ENUMDOC
4394   This is a 16 bit offset from the tiny data area pointer.
4395 COMMENT
4396 ENUM
4397   BFD_RELOC_V850_TDA_4_5_OFFSET
4398 ENUMDOC
4399   This is a 5 bit offset (of which only 4 bits are used) from the tiny
4400   data area pointer.
4401 ENUM
4402   BFD_RELOC_V850_TDA_4_4_OFFSET
4403 ENUMDOC
4404   This is a 4 bit offset from the tiny data area pointer.
4405 ENUM
4406   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4407 ENUMDOC
4408   This is a 16 bit offset from the short data area pointer, with the
4409   bits placed non-contiguously in the instruction.
4410 ENUM
4411   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4412 ENUMDOC
4413   This is a 16 bit offset from the zero data area pointer, with the
4414   bits placed non-contiguously in the instruction.
4415 ENUM
4416   BFD_RELOC_V850_CALLT_6_7_OFFSET
4417 ENUMDOC
4418   This is a 6 bit offset from the call table base pointer.
4419 ENUM
4420   BFD_RELOC_V850_CALLT_16_16_OFFSET
4421 ENUMDOC
4422   This is a 16 bit offset from the call table base pointer.
4423 ENUM
4424   BFD_RELOC_V850_LONGCALL
4425 ENUMDOC
4426   Used for relaxing indirect function calls.
4427 ENUM
4428   BFD_RELOC_V850_LONGJUMP
4429 ENUMDOC
4430   Used for relaxing indirect jumps.
4431 ENUM
4432   BFD_RELOC_V850_ALIGN
4433 ENUMDOC
4434   Used to maintain alignment whilst relaxing.
4435 ENUM
4436   BFD_RELOC_V850_LO16_SPLIT_OFFSET
4437 ENUMDOC
4438   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4439   instructions.
4440 ENUM
4441   BFD_RELOC_V850_16_PCREL
4442 ENUMDOC
4443   This is a 16-bit reloc.
4444 ENUM
4445   BFD_RELOC_V850_17_PCREL
4446 ENUMDOC
4447   This is a 17-bit reloc.
4448 ENUM
4449   BFD_RELOC_V850_23
4450 ENUMDOC
4451   This is a 23-bit reloc.
4452 ENUM
4453   BFD_RELOC_V850_32_PCREL
4454 ENUMDOC
4455   This is a 32-bit reloc.
4456 ENUM
4457   BFD_RELOC_V850_32_ABS
4458 ENUMDOC
4459   This is a 32-bit reloc.
4460 ENUM
4461   BFD_RELOC_V850_16_SPLIT_OFFSET
4462 ENUMDOC
4463   This is a 16-bit reloc.
4464 ENUM
4465   BFD_RELOC_V850_16_S1
4466 ENUMDOC
4467   This is a 16-bit reloc.
4468 ENUM
4469   BFD_RELOC_V850_LO16_S1
4470 ENUMDOC
4471   Low 16 bits. 16 bit shifted by 1.
4472 ENUM
4473   BFD_RELOC_V850_CALLT_15_16_OFFSET
4474 ENUMDOC
4475   This is a 16 bit offset from the call table base pointer.
4476 ENUM
4477   BFD_RELOC_V850_32_GOTPCREL
4478 ENUMDOC
4479   DSO relocations.
4480 ENUM
4481   BFD_RELOC_V850_16_GOT
4482 ENUMDOC
4483   DSO relocations.
4484 ENUM
4485   BFD_RELOC_V850_32_GOT
4486 ENUMDOC
4487   DSO relocations.
4488 ENUM
4489   BFD_RELOC_V850_22_PLT_PCREL
4490 ENUMDOC
4491   DSO relocations.
4492 ENUM
4493   BFD_RELOC_V850_32_PLT_PCREL
4494 ENUMDOC
4495   DSO relocations.
4496 ENUM
4497   BFD_RELOC_V850_COPY
4498 ENUMDOC
4499   DSO relocations.
4500 ENUM
4501   BFD_RELOC_V850_GLOB_DAT
4502 ENUMDOC
4503   DSO relocations.
4504 ENUM
4505   BFD_RELOC_V850_JMP_SLOT
4506 ENUMDOC
4507   DSO relocations.
4508 ENUM
4509   BFD_RELOC_V850_RELATIVE
4510 ENUMDOC
4511   DSO relocations.
4512 ENUM
4513   BFD_RELOC_V850_16_GOTOFF
4514 ENUMDOC
4515   DSO relocations.
4516 ENUM
4517   BFD_RELOC_V850_32_GOTOFF
4518 ENUMDOC
4519   DSO relocations.
4520 ENUM
4521   BFD_RELOC_V850_CODE
4522 ENUMDOC
4523   start code.
4524 ENUM
4525   BFD_RELOC_V850_DATA
4526 ENUMDOC
4527   start data in text.
4528
4529 ENUM
4530   BFD_RELOC_TIC30_LDP
4531 ENUMDOC
4532   This is a 8bit DP reloc for the tms320c30, where the most
4533   significant 8 bits of a 24 bit word are placed into the least
4534   significant 8 bits of the opcode.
4535
4536 ENUM
4537   BFD_RELOC_TIC54X_PARTLS7
4538 ENUMDOC
4539   This is a 7bit reloc for the tms320c54x, where the least
4540   significant 7 bits of a 16 bit word are placed into the least
4541   significant 7 bits of the opcode.
4542
4543 ENUM
4544   BFD_RELOC_TIC54X_PARTMS9
4545 ENUMDOC
4546   This is a 9bit DP reloc for the tms320c54x, where the most
4547   significant 9 bits of a 16 bit word are placed into the least
4548   significant 9 bits of the opcode.
4549
4550 ENUM
4551   BFD_RELOC_TIC54X_23
4552 ENUMDOC
4553   This is an extended address 23-bit reloc for the tms320c54x.
4554
4555 ENUM
4556   BFD_RELOC_TIC54X_16_OF_23
4557 ENUMDOC
4558   This is a 16-bit reloc for the tms320c54x, where the least
4559   significant 16 bits of a 23-bit extended address are placed into
4560   the opcode.
4561
4562 ENUM
4563   BFD_RELOC_TIC54X_MS7_OF_23
4564 ENUMDOC
4565   This is a reloc for the tms320c54x, where the most
4566   significant 7 bits of a 23-bit extended address are placed into
4567   the opcode.
4568
4569 ENUM
4570   BFD_RELOC_C6000_PCR_S21
4571 ENUMX
4572   BFD_RELOC_C6000_PCR_S12
4573 ENUMX
4574   BFD_RELOC_C6000_PCR_S10
4575 ENUMX
4576   BFD_RELOC_C6000_PCR_S7
4577 ENUMX
4578   BFD_RELOC_C6000_ABS_S16
4579 ENUMX
4580   BFD_RELOC_C6000_ABS_L16
4581 ENUMX
4582   BFD_RELOC_C6000_ABS_H16
4583 ENUMX
4584   BFD_RELOC_C6000_SBR_U15_B
4585 ENUMX
4586   BFD_RELOC_C6000_SBR_U15_H
4587 ENUMX
4588   BFD_RELOC_C6000_SBR_U15_W
4589 ENUMX
4590   BFD_RELOC_C6000_SBR_S16
4591 ENUMX
4592   BFD_RELOC_C6000_SBR_L16_B
4593 ENUMX
4594   BFD_RELOC_C6000_SBR_L16_H
4595 ENUMX
4596   BFD_RELOC_C6000_SBR_L16_W
4597 ENUMX
4598   BFD_RELOC_C6000_SBR_H16_B
4599 ENUMX
4600   BFD_RELOC_C6000_SBR_H16_H
4601 ENUMX
4602   BFD_RELOC_C6000_SBR_H16_W
4603 ENUMX
4604   BFD_RELOC_C6000_SBR_GOT_U15_W
4605 ENUMX
4606   BFD_RELOC_C6000_SBR_GOT_L16_W
4607 ENUMX
4608   BFD_RELOC_C6000_SBR_GOT_H16_W
4609 ENUMX
4610   BFD_RELOC_C6000_DSBT_INDEX
4611 ENUMX
4612   BFD_RELOC_C6000_PREL31
4613 ENUMX
4614   BFD_RELOC_C6000_COPY
4615 ENUMX
4616   BFD_RELOC_C6000_JUMP_SLOT
4617 ENUMX
4618   BFD_RELOC_C6000_EHTYPE
4619 ENUMX
4620   BFD_RELOC_C6000_PCR_H16
4621 ENUMX
4622   BFD_RELOC_C6000_PCR_L16
4623 ENUMX
4624   BFD_RELOC_C6000_ALIGN
4625 ENUMX
4626   BFD_RELOC_C6000_FPHEAD
4627 ENUMX
4628   BFD_RELOC_C6000_NOCMP
4629 ENUMDOC
4630   TMS320C6000 relocations.
4631
4632 ENUM
4633   BFD_RELOC_FR30_48
4634 ENUMDOC
4635   This is a 48 bit reloc for the FR30 that stores 32 bits.
4636 ENUM
4637   BFD_RELOC_FR30_20
4638 ENUMDOC
4639   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4640   two sections.
4641 ENUM
4642   BFD_RELOC_FR30_6_IN_4
4643 ENUMDOC
4644   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4645   4 bits.
4646 ENUM
4647   BFD_RELOC_FR30_8_IN_8
4648 ENUMDOC
4649   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4650   into 8 bits.
4651 ENUM
4652   BFD_RELOC_FR30_9_IN_8
4653 ENUMDOC
4654   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4655   into 8 bits.
4656 ENUM
4657   BFD_RELOC_FR30_10_IN_8
4658 ENUMDOC
4659   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4660   into 8 bits.
4661 ENUM
4662   BFD_RELOC_FR30_9_PCREL
4663 ENUMDOC
4664   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4665   short offset into 8 bits.
4666 ENUM
4667   BFD_RELOC_FR30_12_PCREL
4668 ENUMDOC
4669   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4670   short offset into 11 bits.
4671
4672 ENUM
4673   BFD_RELOC_MCORE_PCREL_IMM8BY4
4674 ENUMX
4675   BFD_RELOC_MCORE_PCREL_IMM11BY2
4676 ENUMX
4677   BFD_RELOC_MCORE_PCREL_IMM4BY2
4678 ENUMX
4679   BFD_RELOC_MCORE_PCREL_32
4680 ENUMX
4681   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4682 ENUMX
4683   BFD_RELOC_MCORE_RVA
4684 ENUMDOC
4685   Motorola Mcore relocations.
4686
4687 ENUM
4688   BFD_RELOC_MEP_8
4689 ENUMX
4690   BFD_RELOC_MEP_16
4691 ENUMX
4692   BFD_RELOC_MEP_32
4693 ENUMX
4694   BFD_RELOC_MEP_PCREL8A2
4695 ENUMX
4696   BFD_RELOC_MEP_PCREL12A2
4697 ENUMX
4698   BFD_RELOC_MEP_PCREL17A2
4699 ENUMX
4700   BFD_RELOC_MEP_PCREL24A2
4701 ENUMX
4702   BFD_RELOC_MEP_PCABS24A2
4703 ENUMX
4704   BFD_RELOC_MEP_LOW16
4705 ENUMX
4706   BFD_RELOC_MEP_HI16U
4707 ENUMX
4708   BFD_RELOC_MEP_HI16S
4709 ENUMX
4710   BFD_RELOC_MEP_GPREL
4711 ENUMX
4712   BFD_RELOC_MEP_TPREL
4713 ENUMX
4714   BFD_RELOC_MEP_TPREL7
4715 ENUMX
4716   BFD_RELOC_MEP_TPREL7A2
4717 ENUMX
4718   BFD_RELOC_MEP_TPREL7A4
4719 ENUMX
4720   BFD_RELOC_MEP_UIMM24
4721 ENUMX
4722   BFD_RELOC_MEP_ADDR24A4
4723 ENUMX
4724   BFD_RELOC_MEP_GNU_VTINHERIT
4725 ENUMX
4726   BFD_RELOC_MEP_GNU_VTENTRY
4727 ENUMDOC
4728   Toshiba Media Processor Relocations.
4729 COMMENT
4730
4731 ENUM
4732   BFD_RELOC_METAG_HIADDR16
4733 ENUMX
4734   BFD_RELOC_METAG_LOADDR16
4735 ENUMX
4736   BFD_RELOC_METAG_RELBRANCH
4737 ENUMX
4738   BFD_RELOC_METAG_GETSETOFF
4739 ENUMX
4740   BFD_RELOC_METAG_HIOG
4741 ENUMX
4742   BFD_RELOC_METAG_LOOG
4743 ENUMX
4744   BFD_RELOC_METAG_REL8
4745 ENUMX
4746   BFD_RELOC_METAG_REL16
4747 ENUMX
4748   BFD_RELOC_METAG_HI16_GOTOFF
4749 ENUMX
4750   BFD_RELOC_METAG_LO16_GOTOFF
4751 ENUMX
4752   BFD_RELOC_METAG_GETSET_GOTOFF
4753 ENUMX
4754   BFD_RELOC_METAG_GETSET_GOT
4755 ENUMX
4756   BFD_RELOC_METAG_HI16_GOTPC
4757 ENUMX
4758   BFD_RELOC_METAG_LO16_GOTPC
4759 ENUMX
4760   BFD_RELOC_METAG_HI16_PLT
4761 ENUMX
4762   BFD_RELOC_METAG_LO16_PLT
4763 ENUMX
4764   BFD_RELOC_METAG_RELBRANCH_PLT
4765 ENUMX
4766   BFD_RELOC_METAG_GOTOFF
4767 ENUMX
4768   BFD_RELOC_METAG_PLT
4769 ENUMX
4770   BFD_RELOC_METAG_COPY
4771 ENUMX
4772   BFD_RELOC_METAG_JMP_SLOT
4773 ENUMX
4774   BFD_RELOC_METAG_RELATIVE
4775 ENUMX
4776   BFD_RELOC_METAG_GLOB_DAT
4777 ENUMX
4778   BFD_RELOC_METAG_TLS_GD
4779 ENUMX
4780   BFD_RELOC_METAG_TLS_LDM
4781 ENUMX
4782   BFD_RELOC_METAG_TLS_LDO_HI16
4783 ENUMX
4784   BFD_RELOC_METAG_TLS_LDO_LO16
4785 ENUMX
4786   BFD_RELOC_METAG_TLS_LDO
4787 ENUMX
4788   BFD_RELOC_METAG_TLS_IE
4789 ENUMX
4790   BFD_RELOC_METAG_TLS_IENONPIC
4791 ENUMX
4792   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4793 ENUMX
4794   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4795 ENUMX
4796   BFD_RELOC_METAG_TLS_TPOFF
4797 ENUMX
4798   BFD_RELOC_METAG_TLS_DTPMOD
4799 ENUMX
4800   BFD_RELOC_METAG_TLS_DTPOFF
4801 ENUMX
4802   BFD_RELOC_METAG_TLS_LE
4803 ENUMX
4804   BFD_RELOC_METAG_TLS_LE_HI16
4805 ENUMX
4806   BFD_RELOC_METAG_TLS_LE_LO16
4807 ENUMDOC
4808   Imagination Technologies Meta relocations.
4809
4810 ENUM
4811   BFD_RELOC_MMIX_GETA
4812 ENUMX
4813   BFD_RELOC_MMIX_GETA_1
4814 ENUMX
4815   BFD_RELOC_MMIX_GETA_2
4816 ENUMX
4817   BFD_RELOC_MMIX_GETA_3
4818 ENUMDOC
4819   These are relocations for the GETA instruction.
4820 ENUM
4821   BFD_RELOC_MMIX_CBRANCH
4822 ENUMX
4823   BFD_RELOC_MMIX_CBRANCH_J
4824 ENUMX
4825   BFD_RELOC_MMIX_CBRANCH_1
4826 ENUMX
4827   BFD_RELOC_MMIX_CBRANCH_2
4828 ENUMX
4829   BFD_RELOC_MMIX_CBRANCH_3
4830 ENUMDOC
4831   These are relocations for a conditional branch instruction.
4832 ENUM
4833   BFD_RELOC_MMIX_PUSHJ
4834 ENUMX
4835   BFD_RELOC_MMIX_PUSHJ_1
4836 ENUMX
4837   BFD_RELOC_MMIX_PUSHJ_2
4838 ENUMX
4839   BFD_RELOC_MMIX_PUSHJ_3
4840 ENUMX
4841   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4842 ENUMDOC
4843   These are relocations for the PUSHJ instruction.
4844 ENUM
4845   BFD_RELOC_MMIX_JMP
4846 ENUMX
4847   BFD_RELOC_MMIX_JMP_1
4848 ENUMX
4849   BFD_RELOC_MMIX_JMP_2
4850 ENUMX
4851   BFD_RELOC_MMIX_JMP_3
4852 ENUMDOC
4853   These are relocations for the JMP instruction.
4854 ENUM
4855   BFD_RELOC_MMIX_ADDR19
4856 ENUMDOC
4857   This is a relocation for a relative address as in a GETA instruction or
4858   a branch.
4859 ENUM
4860   BFD_RELOC_MMIX_ADDR27
4861 ENUMDOC
4862   This is a relocation for a relative address as in a JMP instruction.
4863 ENUM
4864   BFD_RELOC_MMIX_REG_OR_BYTE
4865 ENUMDOC
4866   This is a relocation for an instruction field that may be a general
4867   register or a value 0..255.
4868 ENUM
4869   BFD_RELOC_MMIX_REG
4870 ENUMDOC
4871   This is a relocation for an instruction field that may be a general
4872   register.
4873 ENUM
4874   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4875 ENUMDOC
4876   This is a relocation for two instruction fields holding a register and
4877   an offset, the equivalent of the relocation.
4878 ENUM
4879   BFD_RELOC_MMIX_LOCAL
4880 ENUMDOC
4881   This relocation is an assertion that the expression is not allocated as
4882   a global register.  It does not modify contents.
4883
4884 ENUM
4885   BFD_RELOC_AVR_7_PCREL
4886 ENUMDOC
4887   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4888   short offset into 7 bits.
4889 ENUM
4890   BFD_RELOC_AVR_13_PCREL
4891 ENUMDOC
4892   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4893   short offset into 12 bits.
4894 ENUM
4895   BFD_RELOC_AVR_16_PM
4896 ENUMDOC
4897   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4898   program memory address) into 16 bits.
4899 ENUM
4900   BFD_RELOC_AVR_LO8_LDI
4901 ENUMDOC
4902   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4903   data memory address) into 8 bit immediate value of LDI insn.
4904 ENUM
4905   BFD_RELOC_AVR_HI8_LDI
4906 ENUMDOC
4907   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4908   of data memory address) into 8 bit immediate value of LDI insn.
4909 ENUM
4910   BFD_RELOC_AVR_HH8_LDI
4911 ENUMDOC
4912   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4913   of program memory address) into 8 bit immediate value of LDI insn.
4914 ENUM
4915   BFD_RELOC_AVR_MS8_LDI
4916 ENUMDOC
4917   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4918   of 32 bit value) into 8 bit immediate value of LDI insn.
4919 ENUM
4920   BFD_RELOC_AVR_LO8_LDI_NEG
4921 ENUMDOC
4922   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4923   (usually data memory address) into 8 bit immediate value of SUBI insn.
4924 ENUM
4925   BFD_RELOC_AVR_HI8_LDI_NEG
4926 ENUMDOC
4927   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4928   (high 8 bit of data memory address) into 8 bit immediate value of
4929   SUBI insn.
4930 ENUM
4931   BFD_RELOC_AVR_HH8_LDI_NEG
4932 ENUMDOC
4933   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4934   (most high 8 bit of program memory address) into 8 bit immediate value
4935   of LDI or SUBI insn.
4936 ENUM
4937   BFD_RELOC_AVR_MS8_LDI_NEG
4938 ENUMDOC
4939   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4940   of 32 bit value) into 8 bit immediate value of LDI insn.
4941 ENUM
4942   BFD_RELOC_AVR_LO8_LDI_PM
4943 ENUMDOC
4944   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4945   command address) into 8 bit immediate value of LDI insn.
4946 ENUM
4947   BFD_RELOC_AVR_LO8_LDI_GS
4948 ENUMDOC
4949   This is a 16 bit reloc for the AVR that stores 8 bit value
4950   (command address) into 8 bit immediate value of LDI insn. If the address
4951   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4952   in the lower 128k.
4953 ENUM
4954   BFD_RELOC_AVR_HI8_LDI_PM
4955 ENUMDOC
4956   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4957   of command address) into 8 bit immediate value of LDI insn.
4958 ENUM
4959   BFD_RELOC_AVR_HI8_LDI_GS
4960 ENUMDOC
4961   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4962   of command address) into 8 bit immediate value of LDI insn.  If the address
4963   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4964   below 128k.
4965 ENUM
4966   BFD_RELOC_AVR_HH8_LDI_PM
4967 ENUMDOC
4968   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4969   of command address) into 8 bit immediate value of LDI insn.
4970 ENUM
4971   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4972 ENUMDOC
4973   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4974   (usually command address) into 8 bit immediate value of SUBI insn.
4975 ENUM
4976   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4977 ENUMDOC
4978   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4979   (high 8 bit of 16 bit command address) into 8 bit immediate value
4980   of SUBI insn.
4981 ENUM
4982   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4983 ENUMDOC
4984   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4985   (high 6 bit of 22 bit command address) into 8 bit immediate
4986   value of SUBI insn.
4987 ENUM
4988   BFD_RELOC_AVR_CALL
4989 ENUMDOC
4990   This is a 32 bit reloc for the AVR that stores 23 bit value
4991   into 22 bits.
4992 ENUM
4993   BFD_RELOC_AVR_LDI
4994 ENUMDOC
4995   This is a 16 bit reloc for the AVR that stores all needed bits
4996   for absolute addressing with ldi with overflow check to linktime
4997 ENUM
4998   BFD_RELOC_AVR_6
4999 ENUMDOC
5000   This is a 6 bit reloc for the AVR that stores offset for ldd/std
5001   instructions
5002 ENUM
5003   BFD_RELOC_AVR_6_ADIW
5004 ENUMDOC
5005   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
5006   instructions
5007 ENUM
5008   BFD_RELOC_AVR_8_LO
5009 ENUMDOC
5010   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
5011   in .byte lo8(symbol)
5012 ENUM
5013   BFD_RELOC_AVR_8_HI
5014 ENUMDOC
5015   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
5016   in .byte hi8(symbol)
5017 ENUM
5018   BFD_RELOC_AVR_8_HLO
5019 ENUMDOC
5020   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
5021   in .byte hlo8(symbol)
5022 ENUM
5023   BFD_RELOC_AVR_DIFF8
5024 ENUMX
5025   BFD_RELOC_AVR_DIFF16
5026 ENUMX
5027   BFD_RELOC_AVR_DIFF32
5028 ENUMDOC
5029   AVR relocations to mark the difference of two local symbols.
5030   These are only needed to support linker relaxation and can be ignored
5031   when not relaxing.  The field is set to the value of the difference
5032   assuming no relaxation.  The relocation encodes the position of the
5033   second symbol so the linker can determine whether to adjust the field
5034   value.
5035 ENUM
5036   BFD_RELOC_AVR_LDS_STS_16
5037 ENUMDOC
5038   This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
5039   lds and sts instructions supported only tiny core.
5040 ENUM
5041   BFD_RELOC_AVR_PORT6
5042 ENUMDOC
5043   This is a 6 bit reloc for the AVR that stores an I/O register
5044   number for the IN and OUT instructions
5045 ENUM
5046   BFD_RELOC_AVR_PORT5
5047 ENUMDOC
5048   This is a 5 bit reloc for the AVR that stores an I/O register
5049   number for the SBIC, SBIS, SBI and CBI instructions
5050 ENUM
5051   BFD_RELOC_RL78_NEG8
5052 ENUMX
5053   BFD_RELOC_RL78_NEG16
5054 ENUMX
5055   BFD_RELOC_RL78_NEG24
5056 ENUMX
5057   BFD_RELOC_RL78_NEG32
5058 ENUMX
5059   BFD_RELOC_RL78_16_OP
5060 ENUMX
5061   BFD_RELOC_RL78_24_OP
5062 ENUMX
5063   BFD_RELOC_RL78_32_OP
5064 ENUMX
5065   BFD_RELOC_RL78_8U
5066 ENUMX
5067   BFD_RELOC_RL78_16U
5068 ENUMX
5069   BFD_RELOC_RL78_24U
5070 ENUMX
5071   BFD_RELOC_RL78_DIR3U_PCREL
5072 ENUMX
5073   BFD_RELOC_RL78_DIFF
5074 ENUMX
5075   BFD_RELOC_RL78_GPRELB
5076 ENUMX
5077   BFD_RELOC_RL78_GPRELW
5078 ENUMX
5079   BFD_RELOC_RL78_GPRELL
5080 ENUMX
5081   BFD_RELOC_RL78_SYM
5082 ENUMX
5083   BFD_RELOC_RL78_OP_SUBTRACT
5084 ENUMX
5085   BFD_RELOC_RL78_OP_NEG
5086 ENUMX
5087   BFD_RELOC_RL78_OP_AND
5088 ENUMX
5089   BFD_RELOC_RL78_OP_SHRA
5090 ENUMX
5091   BFD_RELOC_RL78_ABS8
5092 ENUMX
5093   BFD_RELOC_RL78_ABS16
5094 ENUMX
5095   BFD_RELOC_RL78_ABS16_REV
5096 ENUMX
5097   BFD_RELOC_RL78_ABS32
5098 ENUMX
5099   BFD_RELOC_RL78_ABS32_REV
5100 ENUMX
5101   BFD_RELOC_RL78_ABS16U
5102 ENUMX
5103   BFD_RELOC_RL78_ABS16UW
5104 ENUMX
5105   BFD_RELOC_RL78_ABS16UL
5106 ENUMX
5107   BFD_RELOC_RL78_RELAX
5108 ENUMX
5109   BFD_RELOC_RL78_HI16
5110 ENUMX
5111   BFD_RELOC_RL78_HI8
5112 ENUMX
5113   BFD_RELOC_RL78_LO16
5114 ENUMX
5115   BFD_RELOC_RL78_CODE
5116 ENUMX
5117   BFD_RELOC_RL78_SADDR
5118 ENUMDOC
5119   Renesas RL78 Relocations.
5120
5121 ENUM
5122   BFD_RELOC_RX_NEG8
5123 ENUMX
5124   BFD_RELOC_RX_NEG16
5125 ENUMX
5126   BFD_RELOC_RX_NEG24
5127 ENUMX
5128   BFD_RELOC_RX_NEG32
5129 ENUMX
5130   BFD_RELOC_RX_16_OP
5131 ENUMX
5132   BFD_RELOC_RX_24_OP
5133 ENUMX
5134   BFD_RELOC_RX_32_OP
5135 ENUMX
5136   BFD_RELOC_RX_8U
5137 ENUMX
5138   BFD_RELOC_RX_16U
5139 ENUMX
5140   BFD_RELOC_RX_24U
5141 ENUMX
5142   BFD_RELOC_RX_DIR3U_PCREL
5143 ENUMX
5144   BFD_RELOC_RX_DIFF
5145 ENUMX
5146   BFD_RELOC_RX_GPRELB
5147 ENUMX
5148   BFD_RELOC_RX_GPRELW
5149 ENUMX
5150   BFD_RELOC_RX_GPRELL
5151 ENUMX
5152   BFD_RELOC_RX_SYM
5153 ENUMX
5154   BFD_RELOC_RX_OP_SUBTRACT
5155 ENUMX
5156   BFD_RELOC_RX_OP_NEG
5157 ENUMX
5158   BFD_RELOC_RX_ABS8
5159 ENUMX
5160   BFD_RELOC_RX_ABS16
5161 ENUMX
5162   BFD_RELOC_RX_ABS16_REV
5163 ENUMX
5164   BFD_RELOC_RX_ABS32
5165 ENUMX
5166   BFD_RELOC_RX_ABS32_REV
5167 ENUMX
5168   BFD_RELOC_RX_ABS16U
5169 ENUMX
5170   BFD_RELOC_RX_ABS16UW
5171 ENUMX
5172   BFD_RELOC_RX_ABS16UL
5173 ENUMX
5174   BFD_RELOC_RX_RELAX
5175 ENUMDOC
5176   Renesas RX Relocations.
5177
5178 ENUM
5179   BFD_RELOC_390_12
5180 ENUMDOC
5181    Direct 12 bit.
5182 ENUM
5183   BFD_RELOC_390_GOT12
5184 ENUMDOC
5185   12 bit GOT offset.
5186 ENUM
5187   BFD_RELOC_390_PLT32
5188 ENUMDOC
5189   32 bit PC relative PLT address.
5190 ENUM
5191   BFD_RELOC_390_COPY
5192 ENUMDOC
5193   Copy symbol at runtime.
5194 ENUM
5195   BFD_RELOC_390_GLOB_DAT
5196 ENUMDOC
5197   Create GOT entry.
5198 ENUM
5199   BFD_RELOC_390_JMP_SLOT
5200 ENUMDOC
5201   Create PLT entry.
5202 ENUM
5203   BFD_RELOC_390_RELATIVE
5204 ENUMDOC
5205   Adjust by program base.
5206 ENUM
5207   BFD_RELOC_390_GOTPC
5208 ENUMDOC
5209   32 bit PC relative offset to GOT.
5210 ENUM
5211   BFD_RELOC_390_GOT16
5212 ENUMDOC
5213   16 bit GOT offset.
5214 ENUM
5215   BFD_RELOC_390_PC12DBL
5216 ENUMDOC
5217   PC relative 12 bit shifted by 1.
5218 ENUM
5219   BFD_RELOC_390_PLT12DBL
5220 ENUMDOC
5221   12 bit PC rel. PLT shifted by 1.
5222 ENUM
5223   BFD_RELOC_390_PC16DBL
5224 ENUMDOC
5225   PC relative 16 bit shifted by 1.
5226 ENUM
5227   BFD_RELOC_390_PLT16DBL
5228 ENUMDOC
5229   16 bit PC rel. PLT shifted by 1.
5230 ENUM
5231   BFD_RELOC_390_PC24DBL
5232 ENUMDOC
5233   PC relative 24 bit shifted by 1.
5234 ENUM
5235   BFD_RELOC_390_PLT24DBL
5236 ENUMDOC
5237   24 bit PC rel. PLT shifted by 1.
5238 ENUM
5239   BFD_RELOC_390_PC32DBL
5240 ENUMDOC
5241   PC relative 32 bit shifted by 1.
5242 ENUM
5243   BFD_RELOC_390_PLT32DBL
5244 ENUMDOC
5245   32 bit PC rel. PLT shifted by 1.
5246 ENUM
5247   BFD_RELOC_390_GOTPCDBL
5248 ENUMDOC
5249   32 bit PC rel. GOT shifted by 1.
5250 ENUM
5251   BFD_RELOC_390_GOT64
5252 ENUMDOC
5253   64 bit GOT offset.
5254 ENUM
5255   BFD_RELOC_390_PLT64
5256 ENUMDOC
5257   64 bit PC relative PLT address.
5258 ENUM
5259   BFD_RELOC_390_GOTENT
5260 ENUMDOC
5261   32 bit rel. offset to GOT entry.
5262 ENUM
5263   BFD_RELOC_390_GOTOFF64
5264 ENUMDOC
5265   64 bit offset to GOT.
5266 ENUM
5267   BFD_RELOC_390_GOTPLT12
5268 ENUMDOC
5269   12-bit offset to symbol-entry within GOT, with PLT handling.
5270 ENUM
5271   BFD_RELOC_390_GOTPLT16
5272 ENUMDOC
5273   16-bit offset to symbol-entry within GOT, with PLT handling.
5274 ENUM
5275   BFD_RELOC_390_GOTPLT32
5276 ENUMDOC
5277   32-bit offset to symbol-entry within GOT, with PLT handling.
5278 ENUM
5279   BFD_RELOC_390_GOTPLT64
5280 ENUMDOC
5281   64-bit offset to symbol-entry within GOT, with PLT handling.
5282 ENUM
5283   BFD_RELOC_390_GOTPLTENT
5284 ENUMDOC
5285   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5286 ENUM
5287   BFD_RELOC_390_PLTOFF16
5288 ENUMDOC
5289   16-bit rel. offset from the GOT to a PLT entry.
5290 ENUM
5291   BFD_RELOC_390_PLTOFF32
5292 ENUMDOC
5293   32-bit rel. offset from the GOT to a PLT entry.
5294 ENUM
5295   BFD_RELOC_390_PLTOFF64
5296 ENUMDOC
5297   64-bit rel. offset from the GOT to a PLT entry.
5298
5299 ENUM
5300   BFD_RELOC_390_TLS_LOAD
5301 ENUMX
5302   BFD_RELOC_390_TLS_GDCALL
5303 ENUMX
5304   BFD_RELOC_390_TLS_LDCALL
5305 ENUMX
5306   BFD_RELOC_390_TLS_GD32
5307 ENUMX
5308   BFD_RELOC_390_TLS_GD64
5309 ENUMX
5310   BFD_RELOC_390_TLS_GOTIE12
5311 ENUMX
5312   BFD_RELOC_390_TLS_GOTIE32
5313 ENUMX
5314   BFD_RELOC_390_TLS_GOTIE64
5315 ENUMX
5316   BFD_RELOC_390_TLS_LDM32
5317 ENUMX
5318   BFD_RELOC_390_TLS_LDM64
5319 ENUMX
5320   BFD_RELOC_390_TLS_IE32
5321 ENUMX
5322   BFD_RELOC_390_TLS_IE64
5323 ENUMX
5324   BFD_RELOC_390_TLS_IEENT
5325 ENUMX
5326   BFD_RELOC_390_TLS_LE32
5327 ENUMX
5328   BFD_RELOC_390_TLS_LE64
5329 ENUMX
5330   BFD_RELOC_390_TLS_LDO32
5331 ENUMX
5332   BFD_RELOC_390_TLS_LDO64
5333 ENUMX
5334   BFD_RELOC_390_TLS_DTPMOD
5335 ENUMX
5336   BFD_RELOC_390_TLS_DTPOFF
5337 ENUMX
5338   BFD_RELOC_390_TLS_TPOFF
5339 ENUMDOC
5340   s390 tls relocations.
5341
5342 ENUM
5343   BFD_RELOC_390_20
5344 ENUMX
5345   BFD_RELOC_390_GOT20
5346 ENUMX
5347   BFD_RELOC_390_GOTPLT20
5348 ENUMX
5349   BFD_RELOC_390_TLS_GOTIE20
5350 ENUMDOC
5351   Long displacement extension.
5352
5353 ENUM
5354   BFD_RELOC_390_IRELATIVE
5355 ENUMDOC
5356   STT_GNU_IFUNC relocation.
5357
5358 ENUM
5359   BFD_RELOC_SCORE_GPREL15
5360 ENUMDOC
5361   Score relocations
5362   Low 16 bit for load/store
5363 ENUM
5364   BFD_RELOC_SCORE_DUMMY2
5365 ENUMX
5366   BFD_RELOC_SCORE_JMP
5367 ENUMDOC
5368   This is a 24-bit reloc with the right 1 bit assumed to be 0
5369 ENUM
5370   BFD_RELOC_SCORE_BRANCH
5371 ENUMDOC
5372   This is a 19-bit reloc with the right 1 bit assumed to be 0
5373 ENUM
5374   BFD_RELOC_SCORE_IMM30
5375 ENUMDOC
5376   This is a 32-bit reloc for 48-bit instructions.
5377 ENUM
5378   BFD_RELOC_SCORE_IMM32
5379 ENUMDOC
5380   This is a 32-bit reloc for 48-bit instructions.
5381 ENUM
5382   BFD_RELOC_SCORE16_JMP
5383 ENUMDOC
5384   This is a 11-bit reloc with the right 1 bit assumed to be 0
5385 ENUM
5386   BFD_RELOC_SCORE16_BRANCH
5387 ENUMDOC
5388   This is a 8-bit reloc with the right 1 bit assumed to be 0
5389 ENUM
5390   BFD_RELOC_SCORE_BCMP
5391 ENUMDOC
5392    This is a 9-bit reloc with the right 1 bit assumed to be 0
5393 ENUM
5394   BFD_RELOC_SCORE_GOT15
5395 ENUMX
5396   BFD_RELOC_SCORE_GOT_LO16
5397 ENUMX
5398   BFD_RELOC_SCORE_CALL15
5399 ENUMX
5400   BFD_RELOC_SCORE_DUMMY_HI16
5401 ENUMDOC
5402   Undocumented Score relocs
5403
5404 ENUM
5405   BFD_RELOC_IP2K_FR9
5406 ENUMDOC
5407   Scenix IP2K - 9-bit register number / data address
5408 ENUM
5409   BFD_RELOC_IP2K_BANK
5410 ENUMDOC
5411   Scenix IP2K - 4-bit register/data bank number
5412 ENUM
5413   BFD_RELOC_IP2K_ADDR16CJP
5414 ENUMDOC
5415   Scenix IP2K - low 13 bits of instruction word address
5416 ENUM
5417   BFD_RELOC_IP2K_PAGE3
5418 ENUMDOC
5419   Scenix IP2K - high 3 bits of instruction word address
5420 ENUM
5421   BFD_RELOC_IP2K_LO8DATA
5422 ENUMX
5423   BFD_RELOC_IP2K_HI8DATA
5424 ENUMX
5425   BFD_RELOC_IP2K_EX8DATA
5426 ENUMDOC
5427   Scenix IP2K - ext/low/high 8 bits of data address
5428 ENUM
5429   BFD_RELOC_IP2K_LO8INSN
5430 ENUMX
5431   BFD_RELOC_IP2K_HI8INSN
5432 ENUMDOC
5433   Scenix IP2K - low/high 8 bits of instruction word address
5434 ENUM
5435   BFD_RELOC_IP2K_PC_SKIP
5436 ENUMDOC
5437   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5438 ENUM
5439   BFD_RELOC_IP2K_TEXT
5440 ENUMDOC
5441   Scenix IP2K - 16 bit word address in text section.
5442 ENUM
5443   BFD_RELOC_IP2K_FR_OFFSET
5444 ENUMDOC
5445   Scenix IP2K - 7-bit sp or dp offset
5446 ENUM
5447   BFD_RELOC_VPE4KMATH_DATA
5448 ENUMX
5449   BFD_RELOC_VPE4KMATH_INSN
5450 ENUMDOC
5451   Scenix VPE4K coprocessor - data/insn-space addressing
5452
5453 ENUM
5454   BFD_RELOC_VTABLE_INHERIT
5455 ENUMX
5456   BFD_RELOC_VTABLE_ENTRY
5457 ENUMDOC
5458   These two relocations are used by the linker to determine which of
5459   the entries in a C++ virtual function table are actually used.  When
5460   the --gc-sections option is given, the linker will zero out the entries
5461   that are not used, so that the code for those functions need not be
5462   included in the output.
5463
5464   VTABLE_INHERIT is a zero-space relocation used to describe to the
5465   linker the inheritance tree of a C++ virtual function table.  The
5466   relocation's symbol should be the parent class' vtable, and the
5467   relocation should be located at the child vtable.
5468
5469   VTABLE_ENTRY is a zero-space relocation that describes the use of a
5470   virtual function table entry.  The reloc's symbol should refer to the
5471   table of the class mentioned in the code.  Off of that base, an offset
5472   describes the entry that is being used.  For Rela hosts, this offset
5473   is stored in the reloc's addend.  For Rel hosts, we are forced to put
5474   this offset in the reloc's section offset.
5475
5476 ENUM
5477   BFD_RELOC_IA64_IMM14
5478 ENUMX
5479   BFD_RELOC_IA64_IMM22
5480 ENUMX
5481   BFD_RELOC_IA64_IMM64
5482 ENUMX
5483   BFD_RELOC_IA64_DIR32MSB
5484 ENUMX
5485   BFD_RELOC_IA64_DIR32LSB
5486 ENUMX
5487   BFD_RELOC_IA64_DIR64MSB
5488 ENUMX
5489   BFD_RELOC_IA64_DIR64LSB
5490 ENUMX
5491   BFD_RELOC_IA64_GPREL22
5492 ENUMX
5493   BFD_RELOC_IA64_GPREL64I
5494 ENUMX
5495   BFD_RELOC_IA64_GPREL32MSB
5496 ENUMX
5497   BFD_RELOC_IA64_GPREL32LSB
5498 ENUMX
5499   BFD_RELOC_IA64_GPREL64MSB
5500 ENUMX
5501   BFD_RELOC_IA64_GPREL64LSB
5502 ENUMX
5503   BFD_RELOC_IA64_LTOFF22
5504 ENUMX
5505   BFD_RELOC_IA64_LTOFF64I
5506 ENUMX
5507   BFD_RELOC_IA64_PLTOFF22
5508 ENUMX
5509   BFD_RELOC_IA64_PLTOFF64I
5510 ENUMX
5511   BFD_RELOC_IA64_PLTOFF64MSB
5512 ENUMX
5513   BFD_RELOC_IA64_PLTOFF64LSB
5514 ENUMX
5515   BFD_RELOC_IA64_FPTR64I
5516 ENUMX
5517   BFD_RELOC_IA64_FPTR32MSB
5518 ENUMX
5519   BFD_RELOC_IA64_FPTR32LSB
5520 ENUMX
5521   BFD_RELOC_IA64_FPTR64MSB
5522 ENUMX
5523   BFD_RELOC_IA64_FPTR64LSB
5524 ENUMX
5525   BFD_RELOC_IA64_PCREL21B
5526 ENUMX
5527   BFD_RELOC_IA64_PCREL21BI
5528 ENUMX
5529   BFD_RELOC_IA64_PCREL21M
5530 ENUMX
5531   BFD_RELOC_IA64_PCREL21F
5532 ENUMX
5533   BFD_RELOC_IA64_PCREL22
5534 ENUMX
5535   BFD_RELOC_IA64_PCREL60B
5536 ENUMX
5537   BFD_RELOC_IA64_PCREL64I
5538 ENUMX
5539   BFD_RELOC_IA64_PCREL32MSB
5540 ENUMX
5541   BFD_RELOC_IA64_PCREL32LSB
5542 ENUMX
5543   BFD_RELOC_IA64_PCREL64MSB
5544 ENUMX
5545   BFD_RELOC_IA64_PCREL64LSB
5546 ENUMX
5547   BFD_RELOC_IA64_LTOFF_FPTR22
5548 ENUMX
5549   BFD_RELOC_IA64_LTOFF_FPTR64I
5550 ENUMX
5551   BFD_RELOC_IA64_LTOFF_FPTR32MSB
5552 ENUMX
5553   BFD_RELOC_IA64_LTOFF_FPTR32LSB
5554 ENUMX
5555   BFD_RELOC_IA64_LTOFF_FPTR64MSB
5556 ENUMX
5557   BFD_RELOC_IA64_LTOFF_FPTR64LSB
5558 ENUMX
5559   BFD_RELOC_IA64_SEGREL32MSB
5560 ENUMX
5561   BFD_RELOC_IA64_SEGREL32LSB
5562 ENUMX
5563   BFD_RELOC_IA64_SEGREL64MSB
5564 ENUMX
5565   BFD_RELOC_IA64_SEGREL64LSB
5566 ENUMX
5567   BFD_RELOC_IA64_SECREL32MSB
5568 ENUMX
5569   BFD_RELOC_IA64_SECREL32LSB
5570 ENUMX
5571   BFD_RELOC_IA64_SECREL64MSB
5572 ENUMX
5573   BFD_RELOC_IA64_SECREL64LSB
5574 ENUMX
5575   BFD_RELOC_IA64_REL32MSB
5576 ENUMX
5577   BFD_RELOC_IA64_REL32LSB
5578 ENUMX
5579   BFD_RELOC_IA64_REL64MSB
5580 ENUMX
5581   BFD_RELOC_IA64_REL64LSB
5582 ENUMX
5583   BFD_RELOC_IA64_LTV32MSB
5584 ENUMX
5585   BFD_RELOC_IA64_LTV32LSB
5586 ENUMX
5587   BFD_RELOC_IA64_LTV64MSB
5588 ENUMX
5589   BFD_RELOC_IA64_LTV64LSB
5590 ENUMX
5591   BFD_RELOC_IA64_IPLTMSB
5592 ENUMX
5593   BFD_RELOC_IA64_IPLTLSB
5594 ENUMX
5595   BFD_RELOC_IA64_COPY
5596 ENUMX
5597   BFD_RELOC_IA64_LTOFF22X
5598 ENUMX
5599   BFD_RELOC_IA64_LDXMOV
5600 ENUMX
5601   BFD_RELOC_IA64_TPREL14
5602 ENUMX
5603   BFD_RELOC_IA64_TPREL22
5604 ENUMX
5605   BFD_RELOC_IA64_TPREL64I
5606 ENUMX
5607   BFD_RELOC_IA64_TPREL64MSB
5608 ENUMX
5609   BFD_RELOC_IA64_TPREL64LSB
5610 ENUMX
5611   BFD_RELOC_IA64_LTOFF_TPREL22
5612 ENUMX
5613   BFD_RELOC_IA64_DTPMOD64MSB
5614 ENUMX
5615   BFD_RELOC_IA64_DTPMOD64LSB
5616 ENUMX
5617   BFD_RELOC_IA64_LTOFF_DTPMOD22
5618 ENUMX
5619   BFD_RELOC_IA64_DTPREL14
5620 ENUMX
5621   BFD_RELOC_IA64_DTPREL22
5622 ENUMX
5623   BFD_RELOC_IA64_DTPREL64I
5624 ENUMX
5625   BFD_RELOC_IA64_DTPREL32MSB
5626 ENUMX
5627   BFD_RELOC_IA64_DTPREL32LSB
5628 ENUMX
5629   BFD_RELOC_IA64_DTPREL64MSB
5630 ENUMX
5631   BFD_RELOC_IA64_DTPREL64LSB
5632 ENUMX
5633   BFD_RELOC_IA64_LTOFF_DTPREL22
5634 ENUMDOC
5635   Intel IA64 Relocations.
5636
5637 ENUM
5638   BFD_RELOC_M68HC11_HI8
5639 ENUMDOC
5640   Motorola 68HC11 reloc.
5641   This is the 8 bit high part of an absolute address.
5642 ENUM
5643   BFD_RELOC_M68HC11_LO8
5644 ENUMDOC
5645   Motorola 68HC11 reloc.
5646   This is the 8 bit low part of an absolute address.
5647 ENUM
5648   BFD_RELOC_M68HC11_3B
5649 ENUMDOC
5650   Motorola 68HC11 reloc.
5651   This is the 3 bit of a value.
5652 ENUM
5653   BFD_RELOC_M68HC11_RL_JUMP
5654 ENUMDOC
5655   Motorola 68HC11 reloc.
5656   This reloc marks the beginning of a jump/call instruction.
5657   It is used for linker relaxation to correctly identify beginning
5658   of instruction and change some branches to use PC-relative
5659   addressing mode.
5660 ENUM
5661   BFD_RELOC_M68HC11_RL_GROUP
5662 ENUMDOC
5663   Motorola 68HC11 reloc.
5664   This reloc marks a group of several instructions that gcc generates
5665   and for which the linker relaxation pass can modify and/or remove
5666   some of them.
5667 ENUM
5668   BFD_RELOC_M68HC11_LO16
5669 ENUMDOC
5670   Motorola 68HC11 reloc.
5671   This is the 16-bit lower part of an address.  It is used for 'call'
5672   instruction to specify the symbol address without any special
5673   transformation (due to memory bank window).
5674 ENUM
5675   BFD_RELOC_M68HC11_PAGE
5676 ENUMDOC
5677   Motorola 68HC11 reloc.
5678   This is a 8-bit reloc that specifies the page number of an address.
5679   It is used by 'call' instruction to specify the page number of
5680   the symbol.
5681 ENUM
5682   BFD_RELOC_M68HC11_24
5683 ENUMDOC
5684   Motorola 68HC11 reloc.
5685   This is a 24-bit reloc that represents the address with a 16-bit
5686   value and a 8-bit page number.  The symbol address is transformed
5687   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5688 ENUM
5689   BFD_RELOC_M68HC12_5B
5690 ENUMDOC
5691   Motorola 68HC12 reloc.
5692   This is the 5 bits of a value.
5693 ENUM
5694   BFD_RELOC_XGATE_RL_JUMP
5695 ENUMDOC
5696   Freescale XGATE reloc.
5697   This reloc marks the beginning of a bra/jal instruction.
5698 ENUM
5699   BFD_RELOC_XGATE_RL_GROUP
5700 ENUMDOC
5701   Freescale XGATE reloc.
5702   This reloc marks a group of several instructions that gcc generates
5703   and for which the linker relaxation pass can modify and/or remove
5704   some of them.
5705 ENUM
5706   BFD_RELOC_XGATE_LO16
5707 ENUMDOC
5708   Freescale XGATE reloc.
5709   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5710   instructions.
5711 ENUM
5712   BFD_RELOC_XGATE_GPAGE
5713 ENUMDOC
5714   Freescale XGATE reloc.
5715 ENUM
5716   BFD_RELOC_XGATE_24
5717 ENUMDOC
5718   Freescale XGATE reloc.
5719 ENUM
5720   BFD_RELOC_XGATE_PCREL_9
5721 ENUMDOC
5722   Freescale XGATE reloc.
5723   This is a 9-bit pc-relative reloc.
5724 ENUM
5725   BFD_RELOC_XGATE_PCREL_10
5726 ENUMDOC
5727   Freescale XGATE reloc.
5728   This is a 10-bit pc-relative reloc.
5729 ENUM
5730   BFD_RELOC_XGATE_IMM8_LO
5731 ENUMDOC
5732   Freescale XGATE reloc.
5733   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5734   instructions.
5735 ENUM
5736   BFD_RELOC_XGATE_IMM8_HI
5737 ENUMDOC
5738   Freescale XGATE reloc.
5739   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5740   instructions.
5741 ENUM
5742   BFD_RELOC_XGATE_IMM3
5743 ENUMDOC
5744   Freescale XGATE reloc.
5745   This is a 3-bit pc-relative reloc.
5746 ENUM
5747   BFD_RELOC_XGATE_IMM4
5748 ENUMDOC
5749   Freescale XGATE reloc.
5750   This is a 4-bit pc-relative reloc.
5751 ENUM
5752   BFD_RELOC_XGATE_IMM5
5753 ENUMDOC
5754   Freescale XGATE reloc.
5755   This is a 5-bit pc-relative reloc.
5756 ENUM
5757   BFD_RELOC_M68HC12_9B
5758 ENUMDOC
5759   Motorola 68HC12 reloc.
5760   This is the 9 bits of a value.
5761 ENUM
5762   BFD_RELOC_M68HC12_16B
5763 ENUMDOC
5764   Motorola 68HC12 reloc.
5765   This is the 16 bits of a value.
5766 ENUM
5767   BFD_RELOC_M68HC12_9_PCREL
5768 ENUMDOC
5769   Motorola 68HC12/XGATE reloc.
5770   This is a PCREL9 branch.
5771 ENUM
5772   BFD_RELOC_M68HC12_10_PCREL
5773 ENUMDOC
5774   Motorola 68HC12/XGATE reloc.
5775   This is a PCREL10 branch.
5776 ENUM
5777   BFD_RELOC_M68HC12_LO8XG
5778 ENUMDOC
5779   Motorola 68HC12/XGATE reloc.
5780   This is the 8 bit low part of an absolute address and immediately precedes
5781   a matching HI8XG part.
5782 ENUM
5783   BFD_RELOC_M68HC12_HI8XG
5784 ENUMDOC
5785   Motorola 68HC12/XGATE reloc.
5786   This is the 8 bit high part of an absolute address and immediately follows
5787   a matching LO8XG part.
5788 ENUM
5789   BFD_RELOC_16C_NUM08
5790 ENUMX
5791   BFD_RELOC_16C_NUM08_C
5792 ENUMX
5793   BFD_RELOC_16C_NUM16
5794 ENUMX
5795   BFD_RELOC_16C_NUM16_C
5796 ENUMX
5797   BFD_RELOC_16C_NUM32
5798 ENUMX
5799   BFD_RELOC_16C_NUM32_C
5800 ENUMX
5801   BFD_RELOC_16C_DISP04
5802 ENUMX
5803   BFD_RELOC_16C_DISP04_C
5804 ENUMX
5805   BFD_RELOC_16C_DISP08
5806 ENUMX
5807   BFD_RELOC_16C_DISP08_C
5808 ENUMX
5809   BFD_RELOC_16C_DISP16
5810 ENUMX
5811   BFD_RELOC_16C_DISP16_C
5812 ENUMX
5813   BFD_RELOC_16C_DISP24
5814 ENUMX
5815   BFD_RELOC_16C_DISP24_C
5816 ENUMX
5817   BFD_RELOC_16C_DISP24a
5818 ENUMX
5819   BFD_RELOC_16C_DISP24a_C
5820 ENUMX
5821   BFD_RELOC_16C_REG04
5822 ENUMX
5823   BFD_RELOC_16C_REG04_C
5824 ENUMX
5825   BFD_RELOC_16C_REG04a
5826 ENUMX
5827   BFD_RELOC_16C_REG04a_C
5828 ENUMX
5829   BFD_RELOC_16C_REG14
5830 ENUMX
5831   BFD_RELOC_16C_REG14_C
5832 ENUMX
5833   BFD_RELOC_16C_REG16
5834 ENUMX
5835   BFD_RELOC_16C_REG16_C
5836 ENUMX
5837   BFD_RELOC_16C_REG20
5838 ENUMX
5839   BFD_RELOC_16C_REG20_C
5840 ENUMX
5841   BFD_RELOC_16C_ABS20
5842 ENUMX
5843   BFD_RELOC_16C_ABS20_C
5844 ENUMX
5845   BFD_RELOC_16C_ABS24
5846 ENUMX
5847   BFD_RELOC_16C_ABS24_C
5848 ENUMX
5849   BFD_RELOC_16C_IMM04
5850 ENUMX
5851   BFD_RELOC_16C_IMM04_C
5852 ENUMX
5853   BFD_RELOC_16C_IMM16
5854 ENUMX
5855   BFD_RELOC_16C_IMM16_C
5856 ENUMX
5857   BFD_RELOC_16C_IMM20
5858 ENUMX
5859   BFD_RELOC_16C_IMM20_C
5860 ENUMX
5861   BFD_RELOC_16C_IMM24
5862 ENUMX
5863   BFD_RELOC_16C_IMM24_C
5864 ENUMX
5865   BFD_RELOC_16C_IMM32
5866 ENUMX
5867   BFD_RELOC_16C_IMM32_C
5868 ENUMDOC
5869   NS CR16C Relocations.
5870
5871 ENUM
5872   BFD_RELOC_CR16_NUM8
5873 ENUMX
5874   BFD_RELOC_CR16_NUM16
5875 ENUMX
5876   BFD_RELOC_CR16_NUM32
5877 ENUMX
5878   BFD_RELOC_CR16_NUM32a
5879 ENUMX
5880   BFD_RELOC_CR16_REGREL0
5881 ENUMX
5882   BFD_RELOC_CR16_REGREL4
5883 ENUMX
5884   BFD_RELOC_CR16_REGREL4a
5885 ENUMX
5886   BFD_RELOC_CR16_REGREL14
5887 ENUMX
5888   BFD_RELOC_CR16_REGREL14a
5889 ENUMX
5890   BFD_RELOC_CR16_REGREL16
5891 ENUMX
5892   BFD_RELOC_CR16_REGREL20
5893 ENUMX
5894   BFD_RELOC_CR16_REGREL20a
5895 ENUMX
5896   BFD_RELOC_CR16_ABS20
5897 ENUMX
5898   BFD_RELOC_CR16_ABS24
5899 ENUMX
5900   BFD_RELOC_CR16_IMM4
5901 ENUMX
5902   BFD_RELOC_CR16_IMM8
5903 ENUMX
5904   BFD_RELOC_CR16_IMM16
5905 ENUMX
5906   BFD_RELOC_CR16_IMM20
5907 ENUMX
5908   BFD_RELOC_CR16_IMM24
5909 ENUMX
5910   BFD_RELOC_CR16_IMM32
5911 ENUMX
5912   BFD_RELOC_CR16_IMM32a
5913 ENUMX
5914   BFD_RELOC_CR16_DISP4
5915 ENUMX
5916   BFD_RELOC_CR16_DISP8
5917 ENUMX
5918   BFD_RELOC_CR16_DISP16
5919 ENUMX
5920   BFD_RELOC_CR16_DISP20
5921 ENUMX
5922   BFD_RELOC_CR16_DISP24
5923 ENUMX
5924   BFD_RELOC_CR16_DISP24a
5925 ENUMX
5926   BFD_RELOC_CR16_SWITCH8
5927 ENUMX
5928   BFD_RELOC_CR16_SWITCH16
5929 ENUMX
5930   BFD_RELOC_CR16_SWITCH32
5931 ENUMX
5932   BFD_RELOC_CR16_GOT_REGREL20
5933 ENUMX
5934   BFD_RELOC_CR16_GOTC_REGREL20
5935 ENUMX
5936   BFD_RELOC_CR16_GLOB_DAT
5937 ENUMDOC
5938   NS CR16 Relocations.
5939
5940 ENUM
5941   BFD_RELOC_CRX_REL4
5942 ENUMX
5943   BFD_RELOC_CRX_REL8
5944 ENUMX
5945   BFD_RELOC_CRX_REL8_CMP
5946 ENUMX
5947   BFD_RELOC_CRX_REL16
5948 ENUMX
5949   BFD_RELOC_CRX_REL24
5950 ENUMX
5951   BFD_RELOC_CRX_REL32
5952 ENUMX
5953   BFD_RELOC_CRX_REGREL12
5954 ENUMX
5955   BFD_RELOC_CRX_REGREL22
5956 ENUMX
5957   BFD_RELOC_CRX_REGREL28
5958 ENUMX
5959   BFD_RELOC_CRX_REGREL32
5960 ENUMX
5961   BFD_RELOC_CRX_ABS16
5962 ENUMX
5963   BFD_RELOC_CRX_ABS32
5964 ENUMX
5965   BFD_RELOC_CRX_NUM8
5966 ENUMX
5967   BFD_RELOC_CRX_NUM16
5968 ENUMX
5969   BFD_RELOC_CRX_NUM32
5970 ENUMX
5971   BFD_RELOC_CRX_IMM16
5972 ENUMX
5973   BFD_RELOC_CRX_IMM32
5974 ENUMX
5975   BFD_RELOC_CRX_SWITCH8
5976 ENUMX
5977   BFD_RELOC_CRX_SWITCH16
5978 ENUMX
5979   BFD_RELOC_CRX_SWITCH32
5980 ENUMDOC
5981   NS CRX Relocations.
5982
5983 ENUM
5984   BFD_RELOC_CRIS_BDISP8
5985 ENUMX
5986   BFD_RELOC_CRIS_UNSIGNED_5
5987 ENUMX
5988   BFD_RELOC_CRIS_SIGNED_6
5989 ENUMX
5990   BFD_RELOC_CRIS_UNSIGNED_6
5991 ENUMX
5992   BFD_RELOC_CRIS_SIGNED_8
5993 ENUMX
5994   BFD_RELOC_CRIS_UNSIGNED_8
5995 ENUMX
5996   BFD_RELOC_CRIS_SIGNED_16
5997 ENUMX
5998   BFD_RELOC_CRIS_UNSIGNED_16
5999 ENUMX
6000   BFD_RELOC_CRIS_LAPCQ_OFFSET
6001 ENUMX
6002   BFD_RELOC_CRIS_UNSIGNED_4
6003 ENUMDOC
6004   These relocs are only used within the CRIS assembler.  They are not
6005   (at present) written to any object files.
6006 ENUM
6007   BFD_RELOC_CRIS_COPY
6008 ENUMX
6009   BFD_RELOC_CRIS_GLOB_DAT
6010 ENUMX
6011   BFD_RELOC_CRIS_JUMP_SLOT
6012 ENUMX
6013   BFD_RELOC_CRIS_RELATIVE
6014 ENUMDOC
6015   Relocs used in ELF shared libraries for CRIS.
6016 ENUM
6017   BFD_RELOC_CRIS_32_GOT
6018 ENUMDOC
6019   32-bit offset to symbol-entry within GOT.
6020 ENUM
6021   BFD_RELOC_CRIS_16_GOT
6022 ENUMDOC
6023   16-bit offset to symbol-entry within GOT.
6024 ENUM
6025   BFD_RELOC_CRIS_32_GOTPLT
6026 ENUMDOC
6027   32-bit offset to symbol-entry within GOT, with PLT handling.
6028 ENUM
6029   BFD_RELOC_CRIS_16_GOTPLT
6030 ENUMDOC
6031   16-bit offset to symbol-entry within GOT, with PLT handling.
6032 ENUM
6033   BFD_RELOC_CRIS_32_GOTREL
6034 ENUMDOC
6035   32-bit offset to symbol, relative to GOT.
6036 ENUM
6037   BFD_RELOC_CRIS_32_PLT_GOTREL
6038 ENUMDOC
6039   32-bit offset to symbol with PLT entry, relative to GOT.
6040 ENUM
6041   BFD_RELOC_CRIS_32_PLT_PCREL
6042 ENUMDOC
6043   32-bit offset to symbol with PLT entry, relative to this relocation.
6044
6045 ENUM
6046   BFD_RELOC_CRIS_32_GOT_GD
6047 ENUMX
6048   BFD_RELOC_CRIS_16_GOT_GD
6049 ENUMX
6050   BFD_RELOC_CRIS_32_GD
6051 ENUMX
6052   BFD_RELOC_CRIS_DTP
6053 ENUMX
6054   BFD_RELOC_CRIS_32_DTPREL
6055 ENUMX
6056   BFD_RELOC_CRIS_16_DTPREL
6057 ENUMX
6058   BFD_RELOC_CRIS_32_GOT_TPREL
6059 ENUMX
6060   BFD_RELOC_CRIS_16_GOT_TPREL
6061 ENUMX
6062   BFD_RELOC_CRIS_32_TPREL
6063 ENUMX
6064   BFD_RELOC_CRIS_16_TPREL
6065 ENUMX
6066   BFD_RELOC_CRIS_DTPMOD
6067 ENUMX
6068   BFD_RELOC_CRIS_32_IE
6069 ENUMDOC
6070   Relocs used in TLS code for CRIS.
6071
6072 ENUM
6073   BFD_RELOC_860_COPY
6074 ENUMX
6075   BFD_RELOC_860_GLOB_DAT
6076 ENUMX
6077   BFD_RELOC_860_JUMP_SLOT
6078 ENUMX
6079   BFD_RELOC_860_RELATIVE
6080 ENUMX
6081   BFD_RELOC_860_PC26
6082 ENUMX
6083   BFD_RELOC_860_PLT26
6084 ENUMX
6085   BFD_RELOC_860_PC16
6086 ENUMX
6087   BFD_RELOC_860_LOW0
6088 ENUMX
6089   BFD_RELOC_860_SPLIT0
6090 ENUMX
6091   BFD_RELOC_860_LOW1
6092 ENUMX
6093   BFD_RELOC_860_SPLIT1
6094 ENUMX
6095   BFD_RELOC_860_LOW2
6096 ENUMX
6097   BFD_RELOC_860_SPLIT2
6098 ENUMX
6099   BFD_RELOC_860_LOW3
6100 ENUMX
6101   BFD_RELOC_860_LOGOT0
6102 ENUMX
6103   BFD_RELOC_860_SPGOT0
6104 ENUMX
6105   BFD_RELOC_860_LOGOT1
6106 ENUMX
6107   BFD_RELOC_860_SPGOT1
6108 ENUMX
6109   BFD_RELOC_860_LOGOTOFF0
6110 ENUMX
6111   BFD_RELOC_860_SPGOTOFF0
6112 ENUMX
6113   BFD_RELOC_860_LOGOTOFF1
6114 ENUMX
6115   BFD_RELOC_860_SPGOTOFF1
6116 ENUMX
6117   BFD_RELOC_860_LOGOTOFF2
6118 ENUMX
6119   BFD_RELOC_860_LOGOTOFF3
6120 ENUMX
6121   BFD_RELOC_860_LOPC
6122 ENUMX
6123   BFD_RELOC_860_HIGHADJ
6124 ENUMX
6125   BFD_RELOC_860_HAGOT
6126 ENUMX
6127   BFD_RELOC_860_HAGOTOFF
6128 ENUMX
6129   BFD_RELOC_860_HAPC
6130 ENUMX
6131   BFD_RELOC_860_HIGH
6132 ENUMX
6133   BFD_RELOC_860_HIGOT
6134 ENUMX
6135   BFD_RELOC_860_HIGOTOFF
6136 ENUMDOC
6137   Intel i860 Relocations.
6138
6139 ENUM
6140   BFD_RELOC_OR1K_REL_26
6141 ENUMX
6142   BFD_RELOC_OR1K_GOTPC_HI16
6143 ENUMX
6144   BFD_RELOC_OR1K_GOTPC_LO16
6145 ENUMX
6146   BFD_RELOC_OR1K_GOT16
6147 ENUMX
6148   BFD_RELOC_OR1K_PLT26
6149 ENUMX
6150   BFD_RELOC_OR1K_GOTOFF_HI16
6151 ENUMX
6152   BFD_RELOC_OR1K_GOTOFF_LO16
6153 ENUMX
6154   BFD_RELOC_OR1K_COPY
6155 ENUMX
6156   BFD_RELOC_OR1K_GLOB_DAT
6157 ENUMX
6158   BFD_RELOC_OR1K_JMP_SLOT
6159 ENUMX
6160   BFD_RELOC_OR1K_RELATIVE
6161 ENUMX
6162   BFD_RELOC_OR1K_TLS_GD_HI16
6163 ENUMX
6164   BFD_RELOC_OR1K_TLS_GD_LO16
6165 ENUMX
6166   BFD_RELOC_OR1K_TLS_LDM_HI16
6167 ENUMX
6168   BFD_RELOC_OR1K_TLS_LDM_LO16
6169 ENUMX
6170   BFD_RELOC_OR1K_TLS_LDO_HI16
6171 ENUMX
6172   BFD_RELOC_OR1K_TLS_LDO_LO16
6173 ENUMX
6174   BFD_RELOC_OR1K_TLS_IE_HI16
6175 ENUMX
6176   BFD_RELOC_OR1K_TLS_IE_LO16
6177 ENUMX
6178   BFD_RELOC_OR1K_TLS_LE_HI16
6179 ENUMX
6180   BFD_RELOC_OR1K_TLS_LE_LO16
6181 ENUMX
6182   BFD_RELOC_OR1K_TLS_TPOFF
6183 ENUMX
6184   BFD_RELOC_OR1K_TLS_DTPOFF
6185 ENUMX
6186   BFD_RELOC_OR1K_TLS_DTPMOD
6187 ENUMDOC
6188   OpenRISC 1000 Relocations.
6189
6190 ENUM
6191   BFD_RELOC_H8_DIR16A8
6192 ENUMX
6193   BFD_RELOC_H8_DIR16R8
6194 ENUMX
6195   BFD_RELOC_H8_DIR24A8
6196 ENUMX
6197   BFD_RELOC_H8_DIR24R8
6198 ENUMX
6199   BFD_RELOC_H8_DIR32A16
6200 ENUMX
6201   BFD_RELOC_H8_DISP32A16
6202 ENUMDOC
6203   H8 elf Relocations.
6204
6205 ENUM
6206   BFD_RELOC_XSTORMY16_REL_12
6207 ENUMX
6208   BFD_RELOC_XSTORMY16_12
6209 ENUMX
6210   BFD_RELOC_XSTORMY16_24
6211 ENUMX
6212   BFD_RELOC_XSTORMY16_FPTR16
6213 ENUMDOC
6214   Sony Xstormy16 Relocations.
6215
6216 ENUM
6217   BFD_RELOC_RELC
6218 ENUMDOC
6219   Self-describing complex relocations.
6220 COMMENT
6221
6222 ENUM
6223   BFD_RELOC_XC16X_PAG
6224 ENUMX
6225   BFD_RELOC_XC16X_POF
6226 ENUMX
6227   BFD_RELOC_XC16X_SEG
6228 ENUMX
6229   BFD_RELOC_XC16X_SOF
6230 ENUMDOC
6231   Infineon Relocations.
6232
6233 ENUM
6234   BFD_RELOC_VAX_GLOB_DAT
6235 ENUMX
6236   BFD_RELOC_VAX_JMP_SLOT
6237 ENUMX
6238   BFD_RELOC_VAX_RELATIVE
6239 ENUMDOC
6240   Relocations used by VAX ELF.
6241
6242 ENUM
6243   BFD_RELOC_MT_PC16
6244 ENUMDOC
6245   Morpho MT - 16 bit immediate relocation.
6246 ENUM
6247   BFD_RELOC_MT_HI16
6248 ENUMDOC
6249   Morpho MT - Hi 16 bits of an address.
6250 ENUM
6251   BFD_RELOC_MT_LO16
6252 ENUMDOC
6253   Morpho MT - Low 16 bits of an address.
6254 ENUM
6255   BFD_RELOC_MT_GNU_VTINHERIT
6256 ENUMDOC
6257   Morpho MT - Used to tell the linker which vtable entries are used.
6258 ENUM
6259   BFD_RELOC_MT_GNU_VTENTRY
6260 ENUMDOC
6261   Morpho MT - Used to tell the linker which vtable entries are used.
6262 ENUM
6263   BFD_RELOC_MT_PCINSN8
6264 ENUMDOC
6265   Morpho MT - 8 bit immediate relocation.
6266
6267 ENUM
6268   BFD_RELOC_MSP430_10_PCREL
6269 ENUMX
6270   BFD_RELOC_MSP430_16_PCREL
6271 ENUMX
6272   BFD_RELOC_MSP430_16
6273 ENUMX
6274   BFD_RELOC_MSP430_16_PCREL_BYTE
6275 ENUMX
6276   BFD_RELOC_MSP430_16_BYTE
6277 ENUMX
6278   BFD_RELOC_MSP430_2X_PCREL
6279 ENUMX
6280   BFD_RELOC_MSP430_RL_PCREL
6281 ENUMX
6282   BFD_RELOC_MSP430_ABS8
6283 ENUMX
6284   BFD_RELOC_MSP430X_PCR20_EXT_SRC
6285 ENUMX
6286   BFD_RELOC_MSP430X_PCR20_EXT_DST
6287 ENUMX
6288   BFD_RELOC_MSP430X_PCR20_EXT_ODST
6289 ENUMX
6290   BFD_RELOC_MSP430X_ABS20_EXT_SRC
6291 ENUMX
6292   BFD_RELOC_MSP430X_ABS20_EXT_DST
6293 ENUMX
6294   BFD_RELOC_MSP430X_ABS20_EXT_ODST
6295 ENUMX
6296   BFD_RELOC_MSP430X_ABS20_ADR_SRC
6297 ENUMX
6298   BFD_RELOC_MSP430X_ABS20_ADR_DST
6299 ENUMX
6300   BFD_RELOC_MSP430X_PCR16
6301 ENUMX
6302   BFD_RELOC_MSP430X_PCR20_CALL
6303 ENUMX
6304   BFD_RELOC_MSP430X_ABS16
6305 ENUMX
6306   BFD_RELOC_MSP430_ABS_HI16
6307 ENUMX
6308   BFD_RELOC_MSP430_PREL31
6309 ENUMX
6310   BFD_RELOC_MSP430_SYM_DIFF
6311 ENUMDOC
6312   msp430 specific relocation codes
6313
6314 ENUM
6315   BFD_RELOC_NIOS2_S16
6316 ENUMX
6317   BFD_RELOC_NIOS2_U16
6318 ENUMX
6319   BFD_RELOC_NIOS2_CALL26
6320 ENUMX
6321   BFD_RELOC_NIOS2_IMM5
6322 ENUMX
6323   BFD_RELOC_NIOS2_CACHE_OPX
6324 ENUMX
6325   BFD_RELOC_NIOS2_IMM6
6326 ENUMX
6327   BFD_RELOC_NIOS2_IMM8
6328 ENUMX
6329   BFD_RELOC_NIOS2_HI16
6330 ENUMX
6331   BFD_RELOC_NIOS2_LO16
6332 ENUMX
6333   BFD_RELOC_NIOS2_HIADJ16
6334 ENUMX
6335   BFD_RELOC_NIOS2_GPREL
6336 ENUMX
6337   BFD_RELOC_NIOS2_UJMP
6338 ENUMX
6339   BFD_RELOC_NIOS2_CJMP
6340 ENUMX
6341   BFD_RELOC_NIOS2_CALLR
6342 ENUMX
6343   BFD_RELOC_NIOS2_ALIGN
6344 ENUMX
6345   BFD_RELOC_NIOS2_GOT16
6346 ENUMX
6347   BFD_RELOC_NIOS2_CALL16
6348 ENUMX
6349   BFD_RELOC_NIOS2_GOTOFF_LO
6350 ENUMX
6351   BFD_RELOC_NIOS2_GOTOFF_HA
6352 ENUMX
6353   BFD_RELOC_NIOS2_PCREL_LO
6354 ENUMX
6355   BFD_RELOC_NIOS2_PCREL_HA
6356 ENUMX
6357   BFD_RELOC_NIOS2_TLS_GD16
6358 ENUMX
6359   BFD_RELOC_NIOS2_TLS_LDM16
6360 ENUMX
6361   BFD_RELOC_NIOS2_TLS_LDO16
6362 ENUMX
6363   BFD_RELOC_NIOS2_TLS_IE16
6364 ENUMX
6365   BFD_RELOC_NIOS2_TLS_LE16
6366 ENUMX
6367   BFD_RELOC_NIOS2_TLS_DTPMOD
6368 ENUMX
6369   BFD_RELOC_NIOS2_TLS_DTPREL
6370 ENUMX
6371   BFD_RELOC_NIOS2_TLS_TPREL
6372 ENUMX
6373   BFD_RELOC_NIOS2_COPY
6374 ENUMX
6375   BFD_RELOC_NIOS2_GLOB_DAT
6376 ENUMX
6377   BFD_RELOC_NIOS2_JUMP_SLOT
6378 ENUMX
6379   BFD_RELOC_NIOS2_RELATIVE
6380 ENUMX
6381   BFD_RELOC_NIOS2_GOTOFF
6382 ENUMX
6383   BFD_RELOC_NIOS2_CALL26_NOAT
6384 ENUMX
6385   BFD_RELOC_NIOS2_GOT_LO
6386 ENUMX
6387   BFD_RELOC_NIOS2_GOT_HA
6388 ENUMX
6389   BFD_RELOC_NIOS2_CALL_LO
6390 ENUMX
6391   BFD_RELOC_NIOS2_CALL_HA
6392 ENUMX
6393   BFD_RELOC_NIOS2_R2_S12
6394 ENUMX
6395   BFD_RELOC_NIOS2_R2_I10_1_PCREL
6396 ENUMX
6397   BFD_RELOC_NIOS2_R2_T1I7_1_PCREL
6398 ENUMX
6399   BFD_RELOC_NIOS2_R2_T1I7_2
6400 ENUMX
6401   BFD_RELOC_NIOS2_R2_T2I4
6402 ENUMX
6403   BFD_RELOC_NIOS2_R2_T2I4_1
6404 ENUMX
6405   BFD_RELOC_NIOS2_R2_T2I4_2
6406 ENUMX
6407   BFD_RELOC_NIOS2_R2_X1I7_2
6408 ENUMX
6409   BFD_RELOC_NIOS2_R2_X2L5
6410 ENUMX
6411   BFD_RELOC_NIOS2_R2_F1I5_2
6412 ENUMX
6413   BFD_RELOC_NIOS2_R2_L5I4X1
6414 ENUMX
6415   BFD_RELOC_NIOS2_R2_T1X1I6
6416 ENUMX
6417   BFD_RELOC_NIOS2_R2_T1X1I6_2
6418 ENUMDOC
6419   Relocations used by the Altera Nios II core.
6420
6421 ENUM
6422   BFD_RELOC_IQ2000_OFFSET_16
6423 ENUMX
6424   BFD_RELOC_IQ2000_OFFSET_21
6425 ENUMX
6426   BFD_RELOC_IQ2000_UHI16
6427 ENUMDOC
6428   IQ2000 Relocations.
6429
6430 ENUM
6431   BFD_RELOC_XTENSA_RTLD
6432 ENUMDOC
6433   Special Xtensa relocation used only by PLT entries in ELF shared
6434   objects to indicate that the runtime linker should set the value
6435   to one of its own internal functions or data structures.
6436 ENUM
6437   BFD_RELOC_XTENSA_GLOB_DAT
6438 ENUMX
6439   BFD_RELOC_XTENSA_JMP_SLOT
6440 ENUMX
6441   BFD_RELOC_XTENSA_RELATIVE
6442 ENUMDOC
6443   Xtensa relocations for ELF shared objects.
6444 ENUM
6445   BFD_RELOC_XTENSA_PLT
6446 ENUMDOC
6447   Xtensa relocation used in ELF object files for symbols that may require
6448   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
6449 ENUM
6450   BFD_RELOC_XTENSA_DIFF8
6451 ENUMX
6452   BFD_RELOC_XTENSA_DIFF16
6453 ENUMX
6454   BFD_RELOC_XTENSA_DIFF32
6455 ENUMDOC
6456   Xtensa relocations to mark the difference of two local symbols.
6457   These are only needed to support linker relaxation and can be ignored
6458   when not relaxing.  The field is set to the value of the difference
6459   assuming no relaxation.  The relocation encodes the position of the
6460   first symbol so the linker can determine whether to adjust the field
6461   value.
6462 ENUM
6463   BFD_RELOC_XTENSA_SLOT0_OP
6464 ENUMX
6465   BFD_RELOC_XTENSA_SLOT1_OP
6466 ENUMX
6467   BFD_RELOC_XTENSA_SLOT2_OP
6468 ENUMX
6469   BFD_RELOC_XTENSA_SLOT3_OP
6470 ENUMX
6471   BFD_RELOC_XTENSA_SLOT4_OP
6472 ENUMX
6473   BFD_RELOC_XTENSA_SLOT5_OP
6474 ENUMX
6475   BFD_RELOC_XTENSA_SLOT6_OP
6476 ENUMX
6477   BFD_RELOC_XTENSA_SLOT7_OP
6478 ENUMX
6479   BFD_RELOC_XTENSA_SLOT8_OP
6480 ENUMX
6481   BFD_RELOC_XTENSA_SLOT9_OP
6482 ENUMX
6483   BFD_RELOC_XTENSA_SLOT10_OP
6484 ENUMX
6485   BFD_RELOC_XTENSA_SLOT11_OP
6486 ENUMX
6487   BFD_RELOC_XTENSA_SLOT12_OP
6488 ENUMX
6489   BFD_RELOC_XTENSA_SLOT13_OP
6490 ENUMX
6491   BFD_RELOC_XTENSA_SLOT14_OP
6492 ENUMDOC
6493   Generic Xtensa relocations for instruction operands.  Only the slot
6494   number is encoded in the relocation.  The relocation applies to the
6495   last PC-relative immediate operand, or if there are no PC-relative
6496   immediates, to the last immediate operand.
6497 ENUM
6498   BFD_RELOC_XTENSA_SLOT0_ALT
6499 ENUMX
6500   BFD_RELOC_XTENSA_SLOT1_ALT
6501 ENUMX
6502   BFD_RELOC_XTENSA_SLOT2_ALT
6503 ENUMX
6504   BFD_RELOC_XTENSA_SLOT3_ALT
6505 ENUMX
6506   BFD_RELOC_XTENSA_SLOT4_ALT
6507 ENUMX
6508   BFD_RELOC_XTENSA_SLOT5_ALT
6509 ENUMX
6510   BFD_RELOC_XTENSA_SLOT6_ALT
6511 ENUMX
6512   BFD_RELOC_XTENSA_SLOT7_ALT
6513 ENUMX
6514   BFD_RELOC_XTENSA_SLOT8_ALT
6515 ENUMX
6516   BFD_RELOC_XTENSA_SLOT9_ALT
6517 ENUMX
6518   BFD_RELOC_XTENSA_SLOT10_ALT
6519 ENUMX
6520   BFD_RELOC_XTENSA_SLOT11_ALT
6521 ENUMX
6522   BFD_RELOC_XTENSA_SLOT12_ALT
6523 ENUMX
6524   BFD_RELOC_XTENSA_SLOT13_ALT
6525 ENUMX
6526   BFD_RELOC_XTENSA_SLOT14_ALT
6527 ENUMDOC
6528   Alternate Xtensa relocations.  Only the slot is encoded in the
6529   relocation.  The meaning of these relocations is opcode-specific.
6530 ENUM
6531   BFD_RELOC_XTENSA_OP0
6532 ENUMX
6533   BFD_RELOC_XTENSA_OP1
6534 ENUMX
6535   BFD_RELOC_XTENSA_OP2
6536 ENUMDOC
6537   Xtensa relocations for backward compatibility.  These have all been
6538   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6539 ENUM
6540   BFD_RELOC_XTENSA_ASM_EXPAND
6541 ENUMDOC
6542   Xtensa relocation to mark that the assembler expanded the
6543   instructions from an original target.  The expansion size is
6544   encoded in the reloc size.
6545 ENUM
6546   BFD_RELOC_XTENSA_ASM_SIMPLIFY
6547 ENUMDOC
6548   Xtensa relocation to mark that the linker should simplify
6549   assembler-expanded instructions.  This is commonly used
6550   internally by the linker after analysis of a
6551   BFD_RELOC_XTENSA_ASM_EXPAND.
6552 ENUM
6553   BFD_RELOC_XTENSA_TLSDESC_FN
6554 ENUMX
6555   BFD_RELOC_XTENSA_TLSDESC_ARG
6556 ENUMX
6557   BFD_RELOC_XTENSA_TLS_DTPOFF
6558 ENUMX
6559   BFD_RELOC_XTENSA_TLS_TPOFF
6560 ENUMX
6561   BFD_RELOC_XTENSA_TLS_FUNC
6562 ENUMX
6563   BFD_RELOC_XTENSA_TLS_ARG
6564 ENUMX
6565   BFD_RELOC_XTENSA_TLS_CALL
6566 ENUMDOC
6567   Xtensa TLS relocations.
6568
6569 ENUM
6570   BFD_RELOC_Z80_DISP8
6571 ENUMDOC
6572   8 bit signed offset in (ix+d) or (iy+d).
6573
6574 ENUM
6575   BFD_RELOC_Z8K_DISP7
6576 ENUMDOC
6577   DJNZ offset.
6578 ENUM
6579   BFD_RELOC_Z8K_CALLR
6580 ENUMDOC
6581   CALR offset.
6582 ENUM
6583   BFD_RELOC_Z8K_IMM4L
6584 ENUMDOC
6585   4 bit value.
6586
6587 ENUM
6588    BFD_RELOC_LM32_CALL
6589 ENUMX
6590    BFD_RELOC_LM32_BRANCH
6591 ENUMX
6592    BFD_RELOC_LM32_16_GOT
6593 ENUMX
6594    BFD_RELOC_LM32_GOTOFF_HI16
6595 ENUMX
6596    BFD_RELOC_LM32_GOTOFF_LO16
6597 ENUMX
6598    BFD_RELOC_LM32_COPY
6599 ENUMX
6600    BFD_RELOC_LM32_GLOB_DAT
6601 ENUMX
6602    BFD_RELOC_LM32_JMP_SLOT
6603 ENUMX
6604    BFD_RELOC_LM32_RELATIVE
6605 ENUMDOC
6606  Lattice Mico32 relocations.
6607
6608 ENUM
6609   BFD_RELOC_MACH_O_SECTDIFF
6610 ENUMDOC
6611   Difference between two section addreses.  Must be followed by a
6612   BFD_RELOC_MACH_O_PAIR.
6613 ENUM
6614   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6615 ENUMDOC
6616   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6617 ENUM
6618   BFD_RELOC_MACH_O_PAIR
6619 ENUMDOC
6620   Pair of relocation.  Contains the first symbol.
6621 ENUM
6622   BFD_RELOC_MACH_O_SUBTRACTOR32
6623 ENUMDOC
6624   Symbol will be substracted.  Must be followed by a BFD_RELOC_32.
6625 ENUM
6626   BFD_RELOC_MACH_O_SUBTRACTOR64
6627 ENUMDOC
6628   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6629
6630 ENUM
6631   BFD_RELOC_MACH_O_X86_64_BRANCH32
6632 ENUMX
6633   BFD_RELOC_MACH_O_X86_64_BRANCH8
6634 ENUMDOC
6635   PCREL relocations.  They are marked as branch to create PLT entry if
6636   required.
6637 ENUM
6638   BFD_RELOC_MACH_O_X86_64_GOT
6639 ENUMDOC
6640   Used when referencing a GOT entry.
6641 ENUM
6642   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6643 ENUMDOC
6644   Used when loading a GOT entry with movq.  It is specially marked so that
6645   the linker could optimize the movq to a leaq if possible.
6646 ENUM
6647   BFD_RELOC_MACH_O_X86_64_PCREL32_1
6648 ENUMDOC
6649   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6650 ENUM
6651   BFD_RELOC_MACH_O_X86_64_PCREL32_2
6652 ENUMDOC
6653   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6654 ENUM
6655   BFD_RELOC_MACH_O_X86_64_PCREL32_4
6656 ENUMDOC
6657   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6658
6659
6660 ENUM
6661   BFD_RELOC_MACH_O_ARM64_ADDEND
6662 ENUMDOC
6663   Addend for PAGE or PAGEOFF.
6664 ENUM
6665   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21
6666 ENUMDOC
6667   Relative offset to page of GOT slot.
6668 ENUM
6669   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12
6670 ENUMDOC
6671   Relative offset within page of GOT slot.
6672 ENUM
6673   BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT
6674 ENUMDOC
6675   Address of a GOT entry.
6676
6677 ENUM
6678   BFD_RELOC_MICROBLAZE_32_LO
6679 ENUMDOC
6680   This is a 32 bit reloc for the microblaze that stores the
6681   low 16 bits of a value
6682 ENUM
6683   BFD_RELOC_MICROBLAZE_32_LO_PCREL
6684 ENUMDOC
6685   This is a 32 bit pc-relative reloc for the microblaze that
6686   stores the low 16 bits of a value
6687 ENUM
6688   BFD_RELOC_MICROBLAZE_32_ROSDA
6689 ENUMDOC
6690   This is a 32 bit reloc for the microblaze that stores a
6691   value relative to the read-only small data area anchor
6692 ENUM
6693   BFD_RELOC_MICROBLAZE_32_RWSDA
6694 ENUMDOC
6695   This is a 32 bit reloc for the microblaze that stores a
6696   value relative to the read-write small data area anchor
6697 ENUM
6698   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6699 ENUMDOC
6700   This is a 32 bit reloc for the microblaze to handle
6701   expressions of the form "Symbol Op Symbol"
6702 ENUM
6703   BFD_RELOC_MICROBLAZE_64_NONE
6704 ENUMDOC
6705   This is a 64 bit reloc that stores the 32 bit pc relative
6706   value in two words (with an imm instruction).  No relocation is
6707   done here - only used for relaxing
6708 ENUM
6709   BFD_RELOC_MICROBLAZE_64_GOTPC
6710 ENUMDOC
6711   This is a 64 bit reloc that stores the 32 bit pc relative
6712   value in two words (with an imm instruction).  The relocation is
6713   PC-relative GOT offset
6714 ENUM
6715   BFD_RELOC_MICROBLAZE_64_GOT
6716 ENUMDOC
6717   This is a 64 bit reloc that stores the 32 bit pc relative
6718   value in two words (with an imm instruction).  The relocation is
6719   GOT offset
6720 ENUM
6721   BFD_RELOC_MICROBLAZE_64_PLT
6722 ENUMDOC
6723   This is a 64 bit reloc that stores the 32 bit pc relative
6724   value in two words (with an imm instruction).  The relocation is
6725   PC-relative offset into PLT
6726 ENUM
6727   BFD_RELOC_MICROBLAZE_64_GOTOFF
6728 ENUMDOC
6729   This is a 64 bit reloc that stores the 32 bit GOT relative
6730   value in two words (with an imm instruction).  The relocation is
6731   relative offset from _GLOBAL_OFFSET_TABLE_
6732 ENUM
6733   BFD_RELOC_MICROBLAZE_32_GOTOFF
6734 ENUMDOC
6735   This is a 32 bit reloc that stores the 32 bit GOT relative
6736   value in a word.  The relocation is relative offset from
6737   _GLOBAL_OFFSET_TABLE_
6738 ENUM
6739   BFD_RELOC_MICROBLAZE_COPY
6740 ENUMDOC
6741   This is used to tell the dynamic linker to copy the value out of
6742   the dynamic object into the runtime process image.
6743 ENUM
6744   BFD_RELOC_MICROBLAZE_64_TLS
6745 ENUMDOC
6746   Unused Reloc
6747 ENUM
6748   BFD_RELOC_MICROBLAZE_64_TLSGD
6749 ENUMDOC
6750   This is a 64 bit reloc that stores the 32 bit GOT relative value
6751   of the GOT TLS GD info entry in two words (with an imm instruction). The
6752   relocation is GOT offset.
6753 ENUM
6754   BFD_RELOC_MICROBLAZE_64_TLSLD
6755 ENUMDOC
6756   This is a 64 bit reloc that stores the 32 bit GOT relative value
6757   of the GOT TLS LD info entry in two words (with an imm instruction). The
6758   relocation is GOT offset.
6759 ENUM
6760   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6761 ENUMDOC
6762   This is a 32 bit reloc that stores the Module ID to GOT(n).
6763 ENUM
6764   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6765 ENUMDOC
6766   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6767 ENUM
6768   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6769 ENUMDOC
6770   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6771   instruction)
6772 ENUM
6773   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6774 ENUMDOC
6775   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6776   to two words (uses imm instruction).
6777 ENUM
6778   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6779 ENUMDOC
6780   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6781   to two words (uses imm instruction).
6782
6783 ENUM
6784   BFD_RELOC_AARCH64_RELOC_START
6785 ENUMDOC
6786   AArch64 pseudo relocation code to mark the start of the AArch64
6787   relocation enumerators.  N.B. the order of the enumerators is
6788   important as several tables in the AArch64 bfd backend are indexed
6789   by these enumerators; make sure they are all synced.
6790 ENUM
6791   BFD_RELOC_AARCH64_NULL
6792 ENUMDOC
6793   Deprecated AArch64 null relocation code.
6794 ENUM
6795   BFD_RELOC_AARCH64_NONE
6796 ENUMDOC
6797   AArch64 null relocation code.
6798 ENUM
6799   BFD_RELOC_AARCH64_64
6800 ENUMX
6801   BFD_RELOC_AARCH64_32
6802 ENUMX
6803   BFD_RELOC_AARCH64_16
6804 ENUMDOC
6805   Basic absolute relocations of N bits.  These are equivalent to
6806 BFD_RELOC_N and they were added to assist the indexing of the howto
6807 table.
6808 ENUM
6809   BFD_RELOC_AARCH64_64_PCREL
6810 ENUMX
6811   BFD_RELOC_AARCH64_32_PCREL
6812 ENUMX
6813   BFD_RELOC_AARCH64_16_PCREL
6814 ENUMDOC
6815   PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL
6816 and they were added to assist the indexing of the howto table.
6817 ENUM
6818   BFD_RELOC_AARCH64_MOVW_G0
6819 ENUMDOC
6820   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6821   of an unsigned address/value.
6822 ENUM
6823   BFD_RELOC_AARCH64_MOVW_G0_NC
6824 ENUMDOC
6825   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
6826   an address/value.  No overflow checking.
6827 ENUM
6828   BFD_RELOC_AARCH64_MOVW_G1
6829 ENUMDOC
6830   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
6831   of an unsigned address/value.
6832 ENUM
6833   BFD_RELOC_AARCH64_MOVW_G1_NC
6834 ENUMDOC
6835   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
6836   of an address/value.  No overflow checking.
6837 ENUM
6838   BFD_RELOC_AARCH64_MOVW_G2
6839 ENUMDOC
6840   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
6841   of an unsigned address/value.
6842 ENUM
6843   BFD_RELOC_AARCH64_MOVW_G2_NC
6844 ENUMDOC
6845   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
6846   of an address/value.  No overflow checking.
6847 ENUM
6848   BFD_RELOC_AARCH64_MOVW_G3
6849 ENUMDOC
6850   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
6851   of a signed or unsigned address/value.
6852 ENUM
6853   BFD_RELOC_AARCH64_MOVW_G0_S
6854 ENUMDOC
6855   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
6856   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6857   value's sign.
6858 ENUM
6859   BFD_RELOC_AARCH64_MOVW_G1_S
6860 ENUMDOC
6861   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
6862   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6863   value's sign.
6864 ENUM
6865   BFD_RELOC_AARCH64_MOVW_G2_S
6866 ENUMDOC
6867   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
6868   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6869   value's sign.
6870 ENUM
6871   BFD_RELOC_AARCH64_LD_LO19_PCREL
6872 ENUMDOC
6873   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
6874   offset.  The lowest two bits must be zero and are not stored in the
6875   instruction, giving a 21 bit signed byte offset.
6876 ENUM
6877   BFD_RELOC_AARCH64_ADR_LO21_PCREL
6878 ENUMDOC
6879   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
6880 ENUM
6881   BFD_RELOC_AARCH64_ADR_HI21_PCREL
6882 ENUMDOC
6883   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6884   offset, giving a 4KB aligned page base address.
6885 ENUM
6886   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
6887 ENUMDOC
6888   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6889   offset, giving a 4KB aligned page base address, but with no overflow
6890   checking.
6891 ENUM
6892   BFD_RELOC_AARCH64_ADD_LO12
6893 ENUMDOC
6894   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
6895   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6896 ENUM
6897   BFD_RELOC_AARCH64_LDST8_LO12
6898 ENUMDOC
6899   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
6900   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6901 ENUM
6902   BFD_RELOC_AARCH64_TSTBR14
6903 ENUMDOC
6904   AArch64 14 bit pc-relative test bit and branch.
6905   The lowest two bits must be zero and are not stored in the instruction,
6906   giving a 16 bit signed byte offset.
6907 ENUM
6908   BFD_RELOC_AARCH64_BRANCH19
6909 ENUMDOC
6910   AArch64 19 bit pc-relative conditional branch and compare & branch.
6911   The lowest two bits must be zero and are not stored in the instruction,
6912   giving a 21 bit signed byte offset.
6913 ENUM
6914   BFD_RELOC_AARCH64_JUMP26
6915 ENUMDOC
6916   AArch64 26 bit pc-relative unconditional branch.
6917   The lowest two bits must be zero and are not stored in the instruction,
6918   giving a 28 bit signed byte offset.
6919 ENUM
6920   BFD_RELOC_AARCH64_CALL26
6921 ENUMDOC
6922   AArch64 26 bit pc-relative unconditional branch and link.
6923   The lowest two bits must be zero and are not stored in the instruction,
6924   giving a 28 bit signed byte offset.
6925 ENUM
6926   BFD_RELOC_AARCH64_LDST16_LO12
6927 ENUMDOC
6928   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
6929   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6930 ENUM
6931   BFD_RELOC_AARCH64_LDST32_LO12
6932 ENUMDOC
6933   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
6934   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6935 ENUM
6936   BFD_RELOC_AARCH64_LDST64_LO12
6937 ENUMDOC
6938   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
6939   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6940 ENUM
6941   BFD_RELOC_AARCH64_LDST128_LO12
6942 ENUMDOC
6943   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
6944   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6945 ENUM
6946   BFD_RELOC_AARCH64_GOT_LD_PREL19
6947 ENUMDOC
6948   AArch64 Load Literal instruction, holding a 19 bit PC relative word
6949   offset of the global offset table entry for a symbol.  The lowest two
6950   bits must be zero and are not stored in the instruction, giving a 21
6951   bit signed byte offset.  This relocation type requires signed overflow
6952   checking.
6953 ENUM
6954   BFD_RELOC_AARCH64_ADR_GOT_PAGE
6955 ENUMDOC
6956   Get to the page base of the global offset table entry for a symbol as
6957   part of an ADRP instruction using a 21 bit PC relative value.Used in
6958   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
6959 ENUM
6960   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
6961 ENUMDOC
6962   Unsigned 12 bit byte offset for 64 bit load/store from the page of
6963   the GOT entry for this symbol.  Used in conjunction with
6964   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in LP64 ABI only.
6965 ENUM
6966   BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
6967 ENUMDOC
6968   Unsigned 12 bit byte offset for 32 bit load/store from the page of
6969   the GOT entry for this symbol.  Used in conjunction with
6970   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in ILP32 ABI only.
6971  ENUM
6972   BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
6973 ENUMDOC
6974   Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry
6975   for this symbol.  Valid in LP64 ABI only.
6976 ENUM
6977   BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
6978 ENUMDOC
6979   Unsigned 16 bit byte higher offset for 64 bit load/store from the GOT entry
6980   for this symbol.  Valid in LP64 ABI only.
6981 ENUM
6982   BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
6983 ENUMDOC
6984   Unsigned 15 bit byte offset for 64 bit load/store from the page of
6985   the GOT entry for this symbol.  Valid in LP64 ABI only.
6986 ENUM
6987   BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14
6988 ENUMDOC
6989   Scaled 14 bit byte offset to the page base of the global offset table.
6990 ENUM
6991   BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15
6992 ENUMDOC
6993   Scaled 15 bit byte offset to the page base of the global offset table.
6994 ENUM
6995   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
6996 ENUMDOC
6997   Get to the page base of the global offset table entry for a symbols
6998   tls_index structure as part of an adrp instruction using a 21 bit PC
6999   relative value.  Used in conjunction with
7000   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
7001 ENUM
7002   BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
7003 ENUMDOC
7004   AArch64 TLS General Dynamic
7005 ENUM
7006   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
7007 ENUMDOC
7008   Unsigned 12 bit byte offset to global offset table entry for a symbols
7009   tls_index structure.  Used in conjunction with
7010   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
7011 ENUM
7012   BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC
7013 ENUMDOC
7014   AArch64 TLS General Dynamic relocation.
7015 ENUM
7016   BFD_RELOC_AARCH64_TLSGD_MOVW_G1
7017 ENUMDOC
7018   AArch64 TLS General Dynamic relocation.
7019 ENUM
7020   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
7021 ENUMDOC
7022   AArch64 TLS INITIAL EXEC relocation.
7023 ENUM
7024   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
7025 ENUMDOC
7026   AArch64 TLS INITIAL EXEC relocation.
7027 ENUM
7028   BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
7029 ENUMDOC
7030   AArch64 TLS INITIAL EXEC relocation.
7031 ENUM
7032   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
7033 ENUMDOC
7034   AArch64 TLS INITIAL EXEC relocation.
7035 ENUM
7036   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
7037 ENUMDOC
7038   AArch64 TLS INITIAL EXEC relocation.
7039 ENUM
7040   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
7041 ENUMDOC
7042   AArch64 TLS INITIAL EXEC relocation.
7043 ENUM
7044   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12
7045 ENUMDOC
7046   bit[23:12] of byte offset to module TLS base address.
7047 ENUM
7048   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12
7049 ENUMDOC
7050   Unsigned 12 bit byte offset to module TLS base address.
7051 ENUM
7052   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
7053 ENUMDOC
7054   No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
7055 ENUM
7056   BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC
7057 ENUMDOC
7058   Unsigned 12 bit byte offset to global offset table entry for a symbols
7059   tls_index structure.  Used in conjunction with
7060   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
7061 ENUM
7062   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21
7063 ENUMDOC
7064   GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP
7065   instruction.
7066 ENUM
7067   BFD_RELOC_AARCH64_TLSLD_ADR_PREL21
7068 ENUMDOC
7069   GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.
7070 ENUM
7071   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12
7072 ENUMDOC
7073   bit[11:1] of byte offset to module TLS base address, encoded in ldst
7074   instructions.
7075 ENUM
7076   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC
7077 ENUMDOC
7078   Similar as BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no overflow check.
7079 ENUM
7080   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12
7081 ENUMDOC
7082   bit[11:2] of byte offset to module TLS base address, encoded in ldst
7083   instructions.
7084 ENUM
7085   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC
7086 ENUMDOC
7087   Similar as BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no overflow check.
7088 ENUM
7089   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12
7090 ENUMDOC
7091   bit[11:3] of byte offset to module TLS base address, encoded in ldst
7092   instructions.
7093 ENUM
7094   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC
7095 ENUMDOC
7096   Similar as BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no overflow check.
7097 ENUM
7098   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12
7099 ENUMDOC
7100   bit[11:0] of byte offset to module TLS base address, encoded in ldst
7101   instructions.
7102 ENUM
7103   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC
7104 ENUMDOC
7105   Similar as BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no overflow check.
7106 ENUM
7107   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7108 ENUMDOC
7109   bit[15:0] of byte offset to module TLS base address.
7110 ENUM
7111   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC
7112 ENUMDOC
7113   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7114 ENUM
7115   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7116 ENUMDOC
7117   bit[31:16] of byte offset to module TLS base address.
7118 ENUM
7119   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC
7120 ENUMDOC
7121   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7122 ENUM
7123   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2
7124 ENUMDOC
7125   bit[47:32] of byte offset to module TLS base address.
7126 ENUM
7127   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
7128 ENUMDOC
7129   AArch64 TLS LOCAL EXEC relocation.
7130 ENUM
7131   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
7132 ENUMDOC
7133   AArch64 TLS LOCAL EXEC relocation.
7134 ENUM
7135   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
7136 ENUMDOC
7137   AArch64 TLS LOCAL EXEC relocation.
7138 ENUM
7139   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
7140 ENUMDOC
7141   AArch64 TLS LOCAL EXEC relocation.
7142 ENUM
7143   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
7144 ENUMDOC
7145   AArch64 TLS LOCAL EXEC relocation.
7146 ENUM
7147   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
7148 ENUMDOC
7149   AArch64 TLS LOCAL EXEC relocation.
7150 ENUM
7151   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
7152 ENUMDOC
7153   AArch64 TLS LOCAL EXEC relocation.
7154 ENUM
7155   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
7156 ENUMDOC
7157   AArch64 TLS LOCAL EXEC relocation.
7158 ENUM
7159   BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
7160 ENUMDOC
7161   AArch64 TLS DESC relocation.
7162 ENUM
7163   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
7164 ENUMDOC
7165   AArch64 TLS DESC relocation.
7166 ENUM
7167   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
7168 ENUMDOC
7169   AArch64 TLS DESC relocation.
7170 ENUM
7171   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
7172 ENUMDOC
7173   AArch64 TLS DESC relocation.
7174 ENUM
7175   BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
7176 ENUMDOC
7177   AArch64 TLS DESC relocation.
7178 ENUM
7179   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
7180 ENUMDOC
7181   AArch64 TLS DESC relocation.
7182 ENUM
7183   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
7184 ENUMDOC
7185   AArch64 TLS DESC relocation.
7186 ENUM
7187   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
7188 ENUMDOC
7189   AArch64 TLS DESC relocation.
7190 ENUM
7191   BFD_RELOC_AARCH64_TLSDESC_LDR
7192 ENUMDOC
7193   AArch64 TLS DESC relocation.
7194 ENUM
7195   BFD_RELOC_AARCH64_TLSDESC_ADD
7196 ENUMDOC
7197   AArch64 TLS DESC relocation.
7198 ENUM
7199   BFD_RELOC_AARCH64_TLSDESC_CALL
7200 ENUMDOC
7201   AArch64 TLS DESC relocation.
7202 ENUM
7203   BFD_RELOC_AARCH64_COPY
7204 ENUMDOC
7205   AArch64 TLS relocation.
7206 ENUM
7207   BFD_RELOC_AARCH64_GLOB_DAT
7208 ENUMDOC
7209   AArch64 TLS relocation.
7210 ENUM
7211   BFD_RELOC_AARCH64_JUMP_SLOT
7212 ENUMDOC
7213   AArch64 TLS relocation.
7214 ENUM
7215   BFD_RELOC_AARCH64_RELATIVE
7216 ENUMDOC
7217   AArch64 TLS relocation.
7218 ENUM
7219   BFD_RELOC_AARCH64_TLS_DTPMOD
7220 ENUMDOC
7221   AArch64 TLS relocation.
7222 ENUM
7223   BFD_RELOC_AARCH64_TLS_DTPREL
7224 ENUMDOC
7225   AArch64 TLS relocation.
7226 ENUM
7227   BFD_RELOC_AARCH64_TLS_TPREL
7228 ENUMDOC
7229   AArch64 TLS relocation.
7230 ENUM
7231   BFD_RELOC_AARCH64_TLSDESC
7232 ENUMDOC
7233   AArch64 TLS relocation.
7234 ENUM
7235   BFD_RELOC_AARCH64_IRELATIVE
7236 ENUMDOC
7237   AArch64 support for STT_GNU_IFUNC.
7238 ENUM
7239   BFD_RELOC_AARCH64_RELOC_END
7240 ENUMDOC
7241   AArch64 pseudo relocation code to mark the end of the AArch64
7242   relocation enumerators that have direct mapping to ELF reloc codes.
7243   There are a few more enumerators after this one; those are mainly
7244   used by the AArch64 assembler for the internal fixup or to select
7245   one of the above enumerators.
7246 ENUM
7247   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
7248 ENUMDOC
7249   AArch64 pseudo relocation code to be used internally by the AArch64
7250   assembler and not (currently) written to any object files.
7251 ENUM
7252   BFD_RELOC_AARCH64_LDST_LO12
7253 ENUMDOC
7254   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
7255   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7256 ENUM
7257   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12
7258 ENUMDOC
7259   AArch64 pseudo relocation code for TLS local dynamic mode.  It's to be
7260   used internally by the AArch64 assembler and not (currently) written to
7261   any object files.
7262 ENUM
7263   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC
7264 ENUMDOC
7265   Similar as BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow check.
7266 ENUM
7267   BFD_RELOC_AARCH64_LD_GOT_LO12_NC
7268 ENUMDOC
7269   AArch64 pseudo relocation code to be used internally by the AArch64
7270   assembler and not (currently) written to any object files.
7271 ENUM
7272   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
7273 ENUMDOC
7274   AArch64 pseudo relocation code to be used internally by the AArch64
7275   assembler and not (currently) written to any object files.
7276 ENUM
7277   BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
7278 ENUMDOC
7279   AArch64 pseudo relocation code to be used internally by the AArch64
7280   assembler and not (currently) written to any object files.
7281 ENUM
7282   BFD_RELOC_TILEPRO_COPY
7283 ENUMX
7284   BFD_RELOC_TILEPRO_GLOB_DAT
7285 ENUMX
7286   BFD_RELOC_TILEPRO_JMP_SLOT
7287 ENUMX
7288   BFD_RELOC_TILEPRO_RELATIVE
7289 ENUMX
7290   BFD_RELOC_TILEPRO_BROFF_X1
7291 ENUMX
7292   BFD_RELOC_TILEPRO_JOFFLONG_X1
7293 ENUMX
7294   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
7295 ENUMX
7296   BFD_RELOC_TILEPRO_IMM8_X0
7297 ENUMX
7298   BFD_RELOC_TILEPRO_IMM8_Y0
7299 ENUMX
7300   BFD_RELOC_TILEPRO_IMM8_X1
7301 ENUMX
7302   BFD_RELOC_TILEPRO_IMM8_Y1
7303 ENUMX
7304   BFD_RELOC_TILEPRO_DEST_IMM8_X1
7305 ENUMX
7306   BFD_RELOC_TILEPRO_MT_IMM15_X1
7307 ENUMX
7308   BFD_RELOC_TILEPRO_MF_IMM15_X1
7309 ENUMX
7310   BFD_RELOC_TILEPRO_IMM16_X0
7311 ENUMX
7312   BFD_RELOC_TILEPRO_IMM16_X1
7313 ENUMX
7314   BFD_RELOC_TILEPRO_IMM16_X0_LO
7315 ENUMX
7316   BFD_RELOC_TILEPRO_IMM16_X1_LO
7317 ENUMX
7318   BFD_RELOC_TILEPRO_IMM16_X0_HI
7319 ENUMX
7320   BFD_RELOC_TILEPRO_IMM16_X1_HI
7321 ENUMX
7322   BFD_RELOC_TILEPRO_IMM16_X0_HA
7323 ENUMX
7324   BFD_RELOC_TILEPRO_IMM16_X1_HA
7325 ENUMX
7326   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
7327 ENUMX
7328   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
7329 ENUMX
7330   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7331 ENUMX
7332   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7333 ENUMX
7334   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7335 ENUMX
7336   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7337 ENUMX
7338   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7339 ENUMX
7340   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7341 ENUMX
7342   BFD_RELOC_TILEPRO_IMM16_X0_GOT
7343 ENUMX
7344   BFD_RELOC_TILEPRO_IMM16_X1_GOT
7345 ENUMX
7346   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7347 ENUMX
7348   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7349 ENUMX
7350   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7351 ENUMX
7352   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7353 ENUMX
7354   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7355 ENUMX
7356   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7357 ENUMX
7358   BFD_RELOC_TILEPRO_MMSTART_X0
7359 ENUMX
7360   BFD_RELOC_TILEPRO_MMEND_X0
7361 ENUMX
7362   BFD_RELOC_TILEPRO_MMSTART_X1
7363 ENUMX
7364   BFD_RELOC_TILEPRO_MMEND_X1
7365 ENUMX
7366   BFD_RELOC_TILEPRO_SHAMT_X0
7367 ENUMX
7368   BFD_RELOC_TILEPRO_SHAMT_X1
7369 ENUMX
7370   BFD_RELOC_TILEPRO_SHAMT_Y0
7371 ENUMX
7372   BFD_RELOC_TILEPRO_SHAMT_Y1
7373 ENUMX
7374   BFD_RELOC_TILEPRO_TLS_GD_CALL
7375 ENUMX
7376   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7377 ENUMX
7378   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7379 ENUMX
7380   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7381 ENUMX
7382   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7383 ENUMX
7384   BFD_RELOC_TILEPRO_TLS_IE_LOAD
7385 ENUMX
7386   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7387 ENUMX
7388   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7389 ENUMX
7390   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7391 ENUMX
7392   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7393 ENUMX
7394   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7395 ENUMX
7396   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7397 ENUMX
7398   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7399 ENUMX
7400   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7401 ENUMX
7402   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7403 ENUMX
7404   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7405 ENUMX
7406   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7407 ENUMX
7408   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7409 ENUMX
7410   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7411 ENUMX
7412   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7413 ENUMX
7414   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7415 ENUMX
7416   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7417 ENUMX
7418   BFD_RELOC_TILEPRO_TLS_DTPMOD32
7419 ENUMX
7420   BFD_RELOC_TILEPRO_TLS_DTPOFF32
7421 ENUMX
7422   BFD_RELOC_TILEPRO_TLS_TPOFF32
7423 ENUMX
7424   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7425 ENUMX
7426   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7427 ENUMX
7428   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7429 ENUMX
7430   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7431 ENUMX
7432   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7433 ENUMX
7434   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7435 ENUMX
7436   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7437 ENUMX
7438   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7439 ENUMDOC
7440   Tilera TILEPro Relocations.
7441 ENUM
7442   BFD_RELOC_TILEGX_HW0
7443 ENUMX
7444   BFD_RELOC_TILEGX_HW1
7445 ENUMX
7446   BFD_RELOC_TILEGX_HW2
7447 ENUMX
7448   BFD_RELOC_TILEGX_HW3
7449 ENUMX
7450   BFD_RELOC_TILEGX_HW0_LAST
7451 ENUMX
7452   BFD_RELOC_TILEGX_HW1_LAST
7453 ENUMX
7454   BFD_RELOC_TILEGX_HW2_LAST
7455 ENUMX
7456   BFD_RELOC_TILEGX_COPY
7457 ENUMX
7458   BFD_RELOC_TILEGX_GLOB_DAT
7459 ENUMX
7460   BFD_RELOC_TILEGX_JMP_SLOT
7461 ENUMX
7462   BFD_RELOC_TILEGX_RELATIVE
7463 ENUMX
7464   BFD_RELOC_TILEGX_BROFF_X1
7465 ENUMX
7466   BFD_RELOC_TILEGX_JUMPOFF_X1
7467 ENUMX
7468   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7469 ENUMX
7470   BFD_RELOC_TILEGX_IMM8_X0
7471 ENUMX
7472   BFD_RELOC_TILEGX_IMM8_Y0
7473 ENUMX
7474   BFD_RELOC_TILEGX_IMM8_X1
7475 ENUMX
7476   BFD_RELOC_TILEGX_IMM8_Y1
7477 ENUMX
7478   BFD_RELOC_TILEGX_DEST_IMM8_X1
7479 ENUMX
7480   BFD_RELOC_TILEGX_MT_IMM14_X1
7481 ENUMX
7482   BFD_RELOC_TILEGX_MF_IMM14_X1
7483 ENUMX
7484   BFD_RELOC_TILEGX_MMSTART_X0
7485 ENUMX
7486   BFD_RELOC_TILEGX_MMEND_X0
7487 ENUMX
7488   BFD_RELOC_TILEGX_SHAMT_X0
7489 ENUMX
7490   BFD_RELOC_TILEGX_SHAMT_X1
7491 ENUMX
7492   BFD_RELOC_TILEGX_SHAMT_Y0
7493 ENUMX
7494   BFD_RELOC_TILEGX_SHAMT_Y1
7495 ENUMX
7496   BFD_RELOC_TILEGX_IMM16_X0_HW0
7497 ENUMX
7498   BFD_RELOC_TILEGX_IMM16_X1_HW0
7499 ENUMX
7500   BFD_RELOC_TILEGX_IMM16_X0_HW1
7501 ENUMX
7502   BFD_RELOC_TILEGX_IMM16_X1_HW1
7503 ENUMX
7504   BFD_RELOC_TILEGX_IMM16_X0_HW2
7505 ENUMX
7506   BFD_RELOC_TILEGX_IMM16_X1_HW2
7507 ENUMX
7508   BFD_RELOC_TILEGX_IMM16_X0_HW3
7509 ENUMX
7510   BFD_RELOC_TILEGX_IMM16_X1_HW3
7511 ENUMX
7512   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7513 ENUMX
7514   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7515 ENUMX
7516   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7517 ENUMX
7518   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7519 ENUMX
7520   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7521 ENUMX
7522   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7523 ENUMX
7524   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7525 ENUMX
7526   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7527 ENUMX
7528   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7529 ENUMX
7530   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7531 ENUMX
7532   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7533 ENUMX
7534   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7535 ENUMX
7536   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7537 ENUMX
7538   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7539 ENUMX
7540   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7541 ENUMX
7542   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7543 ENUMX
7544   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7545 ENUMX
7546   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7547 ENUMX
7548   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7549 ENUMX
7550   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7551 ENUMX
7552   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7553 ENUMX
7554   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7555 ENUMX
7556   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7557 ENUMX
7558   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7559 ENUMX
7560   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7561 ENUMX
7562   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7563 ENUMX
7564   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7565 ENUMX
7566   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7567 ENUMX
7568   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7569 ENUMX
7570   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7571 ENUMX
7572   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7573 ENUMX
7574   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7575 ENUMX
7576   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7577 ENUMX
7578   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7579 ENUMX
7580   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7581 ENUMX
7582   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7583 ENUMX
7584   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7585 ENUMX
7586   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7587 ENUMX
7588   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7589 ENUMX
7590   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7591 ENUMX
7592   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7593 ENUMX
7594   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7595 ENUMX
7596   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7597 ENUMX
7598   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7599 ENUMX
7600   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7601 ENUMX
7602   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7603 ENUMX
7604   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7605 ENUMX
7606   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7607 ENUMX
7608   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7609 ENUMX
7610   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7611 ENUMX
7612   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7613 ENUMX
7614   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7615 ENUMX
7616   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7617 ENUMX
7618   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7619 ENUMX
7620   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7621 ENUMX
7622   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7623 ENUMX
7624   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7625 ENUMX
7626   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7627 ENUMX
7628   BFD_RELOC_TILEGX_TLS_DTPMOD64
7629 ENUMX
7630   BFD_RELOC_TILEGX_TLS_DTPOFF64
7631 ENUMX
7632   BFD_RELOC_TILEGX_TLS_TPOFF64
7633 ENUMX
7634   BFD_RELOC_TILEGX_TLS_DTPMOD32
7635 ENUMX
7636   BFD_RELOC_TILEGX_TLS_DTPOFF32
7637 ENUMX
7638   BFD_RELOC_TILEGX_TLS_TPOFF32
7639 ENUMX
7640   BFD_RELOC_TILEGX_TLS_GD_CALL
7641 ENUMX
7642   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7643 ENUMX
7644   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7645 ENUMX
7646   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7647 ENUMX
7648   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7649 ENUMX
7650   BFD_RELOC_TILEGX_TLS_IE_LOAD
7651 ENUMX
7652   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7653 ENUMX
7654   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7655 ENUMX
7656   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7657 ENUMX
7658   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7659 ENUMDOC
7660   Tilera TILE-Gx Relocations.
7661
7662 ENUM
7663   BFD_RELOC_EPIPHANY_SIMM8
7664 ENUMDOC
7665   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7666 ENUM
7667   BFD_RELOC_EPIPHANY_SIMM24
7668 ENUMDOC
7669   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7670 ENUM
7671   BFD_RELOC_EPIPHANY_HIGH
7672 ENUMDOC
7673   Adapteva EPIPHANY - 16 most-significant bits of absolute address
7674 ENUM
7675   BFD_RELOC_EPIPHANY_LOW
7676 ENUMDOC
7677   Adapteva EPIPHANY - 16 least-significant bits of absolute address
7678 ENUM
7679   BFD_RELOC_EPIPHANY_SIMM11
7680 ENUMDOC
7681   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7682 ENUM
7683   BFD_RELOC_EPIPHANY_IMM11
7684 ENUMDOC
7685   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7686 ENUM
7687   BFD_RELOC_EPIPHANY_IMM8
7688 ENUMDOC
7689   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7690
7691 ENUM
7692   BFD_RELOC_VISIUM_HI16
7693 ENUMX
7694   BFD_RELOC_VISIUM_LO16
7695 ENUMX
7696   BFD_RELOC_VISIUM_IM16
7697 ENUMX
7698   BFD_RELOC_VISIUM_REL16
7699 ENUMX
7700   BFD_RELOC_VISIUM_HI16_PCREL
7701 ENUMX
7702   BFD_RELOC_VISIUM_LO16_PCREL
7703 ENUMX
7704   BFD_RELOC_VISIUM_IM16_PCREL
7705 ENUMDOC
7706   Visium Relocations.
7707
7708 ENDSENUM
7709   BFD_RELOC_UNUSED
7710 CODE_FRAGMENT
7711 .
7712 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
7713 */
7714
7715 /*
7716 FUNCTION
7717         bfd_reloc_type_lookup
7718         bfd_reloc_name_lookup
7719
7720 SYNOPSIS
7721         reloc_howto_type *bfd_reloc_type_lookup
7722           (bfd *abfd, bfd_reloc_code_real_type code);
7723         reloc_howto_type *bfd_reloc_name_lookup
7724           (bfd *abfd, const char *reloc_name);
7725
7726 DESCRIPTION
7727         Return a pointer to a howto structure which, when
7728         invoked, will perform the relocation @var{code} on data from the
7729         architecture noted.
7730
7731 */
7732
7733 reloc_howto_type *
7734 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7735 {
7736   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
7737 }
7738
7739 reloc_howto_type *
7740 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
7741 {
7742   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
7743 }
7744
7745 static reloc_howto_type bfd_howto_32 =
7746 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
7747
7748 /*
7749 INTERNAL_FUNCTION
7750         bfd_default_reloc_type_lookup
7751
7752 SYNOPSIS
7753         reloc_howto_type *bfd_default_reloc_type_lookup
7754           (bfd *abfd, bfd_reloc_code_real_type  code);
7755
7756 DESCRIPTION
7757         Provides a default relocation lookup routine for any architecture.
7758
7759 */
7760
7761 reloc_howto_type *
7762 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7763 {
7764   switch (code)
7765     {
7766     case BFD_RELOC_CTOR:
7767       /* The type of reloc used in a ctor, which will be as wide as the
7768          address - so either a 64, 32, or 16 bitter.  */
7769       switch (bfd_arch_bits_per_address (abfd))
7770         {
7771         case 64:
7772           BFD_FAIL ();
7773           break;
7774         case 32:
7775           return &bfd_howto_32;
7776         case 16:
7777           BFD_FAIL ();
7778           break;
7779         default:
7780           BFD_FAIL ();
7781         }
7782     default:
7783       BFD_FAIL ();
7784     }
7785   return NULL;
7786 }
7787
7788 /*
7789 FUNCTION
7790         bfd_get_reloc_code_name
7791
7792 SYNOPSIS
7793         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
7794
7795 DESCRIPTION
7796         Provides a printable name for the supplied relocation code.
7797         Useful mainly for printing error messages.
7798 */
7799
7800 const char *
7801 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
7802 {
7803   if (code > BFD_RELOC_UNUSED)
7804     return 0;
7805   return bfd_reloc_code_real_names[code];
7806 }
7807
7808 /*
7809 INTERNAL_FUNCTION
7810         bfd_generic_relax_section
7811
7812 SYNOPSIS
7813         bfd_boolean bfd_generic_relax_section
7814           (bfd *abfd,
7815            asection *section,
7816            struct bfd_link_info *,
7817            bfd_boolean *);
7818
7819 DESCRIPTION
7820         Provides default handling for relaxing for back ends which
7821         don't do relaxing.
7822 */
7823
7824 bfd_boolean
7825 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
7826                            asection *section ATTRIBUTE_UNUSED,
7827                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
7828                            bfd_boolean *again)
7829 {
7830   if (bfd_link_relocatable (link_info))
7831     (*link_info->callbacks->einfo)
7832       (_("%P%F: --relax and -r may not be used together\n"));
7833
7834   *again = FALSE;
7835   return TRUE;
7836 }
7837
7838 /*
7839 INTERNAL_FUNCTION
7840         bfd_generic_gc_sections
7841
7842 SYNOPSIS
7843         bfd_boolean bfd_generic_gc_sections
7844           (bfd *, struct bfd_link_info *);
7845
7846 DESCRIPTION
7847         Provides default handling for relaxing for back ends which
7848         don't do section gc -- i.e., does nothing.
7849 */
7850
7851 bfd_boolean
7852 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
7853                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
7854 {
7855   return TRUE;
7856 }
7857
7858 /*
7859 INTERNAL_FUNCTION
7860         bfd_generic_lookup_section_flags
7861
7862 SYNOPSIS
7863         bfd_boolean bfd_generic_lookup_section_flags
7864           (struct bfd_link_info *, struct flag_info *, asection *);
7865
7866 DESCRIPTION
7867         Provides default handling for section flags lookup
7868         -- i.e., does nothing.
7869         Returns FALSE if the section should be omitted, otherwise TRUE.
7870 */
7871
7872 bfd_boolean
7873 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
7874                                   struct flag_info *flaginfo,
7875                                   asection *section ATTRIBUTE_UNUSED)
7876 {
7877   if (flaginfo != NULL)
7878     {
7879       _bfd_error_handler (_("INPUT_SECTION_FLAGS are not supported.\n"));
7880       return FALSE;
7881     }
7882   return TRUE;
7883 }
7884
7885 /*
7886 INTERNAL_FUNCTION
7887         bfd_generic_merge_sections
7888
7889 SYNOPSIS
7890         bfd_boolean bfd_generic_merge_sections
7891           (bfd *, struct bfd_link_info *);
7892
7893 DESCRIPTION
7894         Provides default handling for SEC_MERGE section merging for back ends
7895         which don't have SEC_MERGE support -- i.e., does nothing.
7896 */
7897
7898 bfd_boolean
7899 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
7900                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
7901 {
7902   return TRUE;
7903 }
7904
7905 /*
7906 INTERNAL_FUNCTION
7907         bfd_generic_get_relocated_section_contents
7908
7909 SYNOPSIS
7910         bfd_byte *bfd_generic_get_relocated_section_contents
7911           (bfd *abfd,
7912            struct bfd_link_info *link_info,
7913            struct bfd_link_order *link_order,
7914            bfd_byte *data,
7915            bfd_boolean relocatable,
7916            asymbol **symbols);
7917
7918 DESCRIPTION
7919         Provides default handling of relocation effort for back ends
7920         which can't be bothered to do it efficiently.
7921
7922 */
7923
7924 bfd_byte *
7925 bfd_generic_get_relocated_section_contents (bfd *abfd,
7926                                             struct bfd_link_info *link_info,
7927                                             struct bfd_link_order *link_order,
7928                                             bfd_byte *data,
7929                                             bfd_boolean relocatable,
7930                                             asymbol **symbols)
7931 {
7932   bfd *input_bfd = link_order->u.indirect.section->owner;
7933   asection *input_section = link_order->u.indirect.section;
7934   long reloc_size;
7935   arelent **reloc_vector;
7936   long reloc_count;
7937
7938   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
7939   if (reloc_size < 0)
7940     return NULL;
7941
7942   /* Read in the section.  */
7943   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
7944     return NULL;
7945
7946   if (reloc_size == 0)
7947     return data;
7948
7949   reloc_vector = (arelent **) bfd_malloc (reloc_size);
7950   if (reloc_vector == NULL)
7951     return NULL;
7952
7953   reloc_count = bfd_canonicalize_reloc (input_bfd,
7954                                         input_section,
7955                                         reloc_vector,
7956                                         symbols);
7957   if (reloc_count < 0)
7958     goto error_return;
7959
7960   if (reloc_count > 0)
7961     {
7962       arelent **parent;
7963
7964       for (parent = reloc_vector; *parent != NULL; parent++)
7965         {
7966           char *error_message = NULL;
7967           asymbol *symbol;
7968           bfd_reloc_status_type r;
7969
7970           symbol = *(*parent)->sym_ptr_ptr;
7971           /* PR ld/19628: A specially crafted input file
7972              can result in a NULL symbol pointer here.  */
7973           if (symbol == NULL)
7974             {
7975               link_info->callbacks->einfo
7976                 /* xgettext:c-format */
7977                 (_("%X%P: %B(%A): error: relocation for offset %V has no value\n"),
7978                  abfd, input_section, (* parent)->address);
7979               goto error_return;
7980             }
7981
7982           if (symbol->section && discarded_section (symbol->section))
7983             {
7984               bfd_byte *p;
7985               static reloc_howto_type none_howto
7986                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
7987                          "unused", FALSE, 0, 0, FALSE);
7988
7989               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
7990               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
7991                                    p);
7992               (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
7993               (*parent)->addend = 0;
7994               (*parent)->howto = &none_howto;
7995               r = bfd_reloc_ok;
7996             }
7997           else
7998             r = bfd_perform_relocation (input_bfd,
7999                                         *parent,
8000                                         data,
8001                                         input_section,
8002                                         relocatable ? abfd : NULL,
8003                                         &error_message);
8004
8005           if (relocatable)
8006             {
8007               asection *os = input_section->output_section;
8008
8009               /* A partial link, so keep the relocs.  */
8010               os->orelocation[os->reloc_count] = *parent;
8011               os->reloc_count++;
8012             }
8013
8014           if (r != bfd_reloc_ok)
8015             {
8016               switch (r)
8017                 {
8018                 case bfd_reloc_undefined:
8019                   (*link_info->callbacks->undefined_symbol)
8020                     (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8021                      input_bfd, input_section, (*parent)->address, TRUE);
8022                   break;
8023                 case bfd_reloc_dangerous:
8024                   BFD_ASSERT (error_message != NULL);
8025                   (*link_info->callbacks->reloc_dangerous)
8026                     (link_info, error_message,
8027                      input_bfd, input_section, (*parent)->address);
8028                   break;
8029                 case bfd_reloc_overflow:
8030                   (*link_info->callbacks->reloc_overflow)
8031                     (link_info, NULL,
8032                      bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8033                      (*parent)->howto->name, (*parent)->addend,
8034                      input_bfd, input_section, (*parent)->address);
8035                   break;
8036                 case bfd_reloc_outofrange:
8037                   /* PR ld/13730:
8038                      This error can result when processing some partially
8039                      complete binaries.  Do not abort, but issue an error
8040                      message instead.  */
8041                   link_info->callbacks->einfo
8042                     /* xgettext:c-format */
8043                     (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
8044                      abfd, input_section, * parent);
8045                   goto error_return;
8046
8047                 case bfd_reloc_notsupported:
8048                   /* PR ld/17512
8049                      This error can result when processing a corrupt binary.
8050                      Do not abort.  Issue an error message instead.  */
8051                   link_info->callbacks->einfo
8052                     /* xgettext:c-format */
8053                     (_("%X%P: %B(%A): relocation \"%R\" is not supported\n"),
8054                      abfd, input_section, * parent);
8055                   goto error_return;
8056
8057                 default:
8058                   /* PR 17512; file: 90c2a92e.
8059                      Report unexpected results, without aborting.  */
8060                   link_info->callbacks->einfo
8061                     /* xgettext:c-format */
8062                     (_("%X%P: %B(%A): relocation \"%R\" returns an unrecognized value %x\n"),
8063                      abfd, input_section, * parent, r);
8064                   break;
8065                 }
8066
8067             }
8068         }
8069     }
8070
8071   free (reloc_vector);
8072   return data;
8073
8074 error_return:
8075   free (reloc_vector);
8076   return NULL;
8077 }