1 2019-06-26 Nick Clifton <nickc@redhat.com>
4 * bucomm.c (bfd_nonfatal): If no bfd error code has been set then
5 indicate this in the output.
6 (bfd_nonfatal_message): Likewise.
8 2019-06-25 Jan Beulich <jbeulich@suse.com>
10 * readelf.c (dump_ctf_indent_lines): Rename local variable
13 2019-06-25 Jan Beulich <jbeulich@suse.com>
15 * objdump.c (dump_ctf_indent_lines): Rename local variable
18 2019-06-14 Alan Modra <amodra@gmail.com>
20 * Makefile.in: Regenerate.
21 * aclocal.m4: Regenerate.
22 * doc/Makefile.in: Regenerate.
24 2019-06-12 Christos Zoulas <christos@zoulas.com>
27 * readelf.c (process_netbsd_elf_note): Add support for
29 (process_note): Add support for PaX notes.
31 2019-06-12 Christos Zoulas <christos@zoulas.com>
34 * readelf.c (get_netbsd_elfcore_note_type): Add support for SH
37 2019-06-12 Christos Zoulas <christos@zoulas.com>
40 * readelf.c (get_netbsd_elfcore_note_type): Add support for NetBSD
43 2019-06-11 Christos Zoulas <christos@zoulas.com>
46 * readelf.c (get_alpha_symbol_other): New function.
47 (get_symbol_other): Use for Alpha symbols.
48 (is_32bit_pcrel_reloc): Add R_VAX_PCREL32.
50 2019-06-11 Christos Zoulas <christos@zoulas.com>
53 * readelf.c (decode_arm_unwind): Ensure that the local variable
54 'addr' is always initialised.
56 2019-06-10 Christos Zoulas <christos@zoulas.com>
59 * strings.c (print_strings): Use %u to print unsigned values in
62 2019-06-10 Christos Zoulas <christos@zoulas.com>
65 * arsup.c (ar_open): Use asprintf in place of xmalloc and
68 2019-06-03 Nick Clifton <nickc@redhat.com>
71 2019-05-29 Nick Clifton <nickc@redhat.com>
73 * configure.ac (LIBCTF): Export. Set to empty for non-ELF based
75 (HAVE_LIBCTF): Define if libctf support is available.
76 * Makefile.am (LIBCTF): Set value to @LIBCTF@.
77 * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
79 * readelf.c: Likewise.
80 * configure: Regenerate.
81 * Makefile.in: Regenerate.
82 * config.in: Regenerate.
84 2019-05-30 Nick Alcock <nick.alcock@oracle.com>
86 * objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
88 * readelf.c (shdr_to_ctf_sect): Likewise.
90 2019-05-30 Nick Clifton <nickc@redhat.com>
93 * readelf.c (process_version_sections): Add 0x prefix to address
94 display. Correct indentation.
96 2019-05-30 Alan Modra <amodra@gmail.com>
98 * testsuite/lib/binutils-common.exp (supports_gnu_unique): Add
99 s12z to targets not supporting this feature.
101 2019-05-30 Alan Modra <amodra@gmail.com>
103 * testsuite/lib/binutils-common.exp (run_dump_test): Support
104 tcl procedures for xfail args.
106 2019-05-29 Nick Clifton <nickc@redhat.com>
108 * README-how-to-make-a-release: Add libctf to list of directories
109 that need updates in their ChangeLogs.
111 2019-05-29 Nick Clifton <nickc@redhat.com>
113 * configure.ac (LIBCTF): Export. Set to empty for non-ELF based
115 (HAVE_LIBCTF): Define if libctf support is available.
116 * Makefile.am (LIBCTF): Set value to @LIBCTF@.
117 * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
119 * readelf.c: Likewise.
120 * configure: Regenerate.
121 * Makefile.in: Regenerate.
122 * config.in: Regenerate.
124 2019-05-28 Nick Alcock <nick.alcock@oracle.com>
126 * MAINTAINERS: Add myself as CTF maintainer.
128 2019-05-28 Nick Alcock <nick.alcock@oracle.com>
130 * objdump.c (ctf-api.h): New include.
131 (dump_ctf_section_info): New variable.
132 (dump_ctf_section_name): Likewise.
133 (usage): Describe new options.
134 (enum option_values): Add OPTION_CTF and OPTION_CTF_PARENT.
135 (main): Use them to add --ctf and --ctf-parent.
136 (read_section_stabs): Add new parameter, entsize_ptr.
137 (find_stabs_section): Adjust accordingly.
139 (dump_ctf_indent_lines): New.
140 (dump_ctf_archive_member): New.
142 (dump_bfd): Call it. Free resources afterwards.
143 * readelf.c (ctf-api.h): New include.
145 (static bfd_boolean do_ctf): Likewise.
146 (dump_ctf_parent_name): Likewise.
147 (dump_ctf_symtab_name): Likewise.
148 (dump_ctf_strtab_name): Likewise.
149 (OPTION_CTF_DUMP): Likewise.
150 (OPTION_CTF_PARENT): Likewise.
151 (OPTION_CTF_SYMBOLS): Likewise.
152 (OPTION_CTF_STRINGS): Likewise.
155 (parse_args): Handle the new options, requesting CTF_DUMP.
156 (process_section_contents): Handle CTF_DUMP.
157 (shdr_to_ctf_sect): New.
158 (dump_ctf_indent_lines): New.
159 (dump_section_as_ctf): New.
160 (main): Free resources.
161 * Makefile.am (LIBCTF): New variable.
162 (objdump_DEPENDENCIES): Use it.
163 (readelf_DEPENDENCIES): Likewise.
164 (objdump_LDADD): Likewise.
165 (readelf_LDADD): Likewise.
166 * aclocal.m4: Regenerated.
167 * Makefile.in: Likewise.
169 * doc/binutils.texi (objdump): Document the new options.
171 * doc/ctf.options.texi: New.
172 * doc/Makefile.in: Regenerated.
173 * NEWS: Mention the new feature.
175 2019-05-27 Alan Modra <amodra@gmail.com>
177 * readelf.c (process_section_groups): Continue processing groups
178 when sh_entsize exceeds group size.
180 2019-05-24 Szabolcs Nagy <szabolcs.nagy@arm.com>
182 * readelf.c (get_aarch64_dynamic_type): Handle DT_AARCH64_VARIANT_PCS.
183 (get_aarch64_symbol_other): New, handles STO_AARCH64_VARIANT_PCS.
184 (get_symbol_other): Call get_aarch64_symbol_other.
186 2019-05-24 Alan Modra <amodra@gmail.com>
188 * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
190 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
192 * MAINTAINERS: Add myself as the maintainer for BPF.
194 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
196 * readelf.c: Include elf/bpf.h.
197 (guess_is_rela): Hanle EM_BPF.
198 (dump_relocations): Likewise.
199 (is_32bit_abs_reloc): Likewise.
200 * testsuite/binutils-all/nm.exp: Add bpf-*-* to the list of
203 2019-05-21 Tamar Christina <tamar.christina@arm.com>
205 * dwarf.c (dwarf_regnames_aarch64): Add SVE registers.
206 * testsuite/binutils-all/aarch64/sve-dwarf-registers.d: New test.
207 * testsuite/binutils-all/aarch64/sve-dwarf-registers.s: New test.
209 2019-05-20 Faraz Shahbazker <fshahbazker@wavecomp.com>
212 * testsuite/binutils-all/readelf.ss-mips: Update reference output.
213 * testsuite/binutils-all/readelf.ss-tmips: Likewise.
215 2019-05-20 Nick Clifton <nickc@redhat.com>
217 * po/ca.po: Updated Catalan translation.
219 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
221 * NEWS: Mention Armv8.1-M Mainline and MVE.
223 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
225 * readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
226 (arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
228 2019-05-14 Jamey Hicks <jamey.hicks@gmail.com>
231 * objcopy.c: Add new option --verilog-data-width. Use it to set
232 the value of VerilogDataWidth.
233 * doc/binutils.texi: Document the new option.
234 * testsuite/binutils-all/objcopy.exp: Run tests of new option.
235 * testsuite/binutils-all/verilog-1.hex: New file.
236 * testsuite/binutils-all/verilog-2.hex: New file.
237 * testsuite/binutils-all/verilog-4.hex: New file.
238 * testsuite/binutils-all/verilog-8.hex: New file.
239 * NEWS: Mention the new feature.
241 2019-05-10 Alan Modra <amodra@gmail.com>
243 * testsuite/binutils-all/objdump.exp (test_objdump_disas_limited),
244 (test_objdump_content_limited): Add text arg, use in place of .text.
245 (bintest_signed.o): Call get_standard_section_names for name of
248 2019-05-08 Faraz Shahbazker <fshahbazker@wavecomp.com>
250 * objdump.c (sign_extend_address): New function.
251 (dump_bfd): Sign-extend user-specified start/stop addresses
252 for targets that need it.
253 * testsuite/binutils-all/objdump.exp: Add tests for objdump
254 with start and stop addresses in higher address ranges.
256 2019-05-01 Matthew Malcomson <matthew.malcomson@arm.com>
258 * testsuite/binutils-all/objdump.exp: Correct executable
260 * testsuite/binutils-all/compress.exp: Likewise.
262 2019-05-01 Nick Clifton <nickc@redhat.com>
265 * nm.c: (print_format): New variable.
266 (value_format_32bit, value_format_64bit): Delete.
267 (set_print_radix): Remove code to alter value_format strings.
268 (set_output_format): Record chosen format in print_format.
269 (get_print_format): New function - constructs a printf formatting
270 string according to the requirements of size, radix, and output
272 (print_value): Use get_print_format.
273 * testsuite/binutils-all/nm.exp: Add tests of "nm --format=posix"
276 2019-04-30 Alan Modra <amodra@gmail.com>
278 * wrstabs.c (stab_start_class_type): Add assert to work around
281 2019-04-24 Nick Clifton <nickc@redhat.com>
283 * objcopy.c (strip_main): Do not enable note merging by default if
284 just stripping debug or dwo information.
285 * doc/binutils.texi (strip): Update documentation.
287 2019-04-23 Nick Clifton <nickc@redhat.com>
289 * README-how-to-make-a-release: Add note to update the symbolic
290 link from "docs" to "docs-2.x" on the sourceware website.
292 2019-04-16 Alan Modra <amodra@gmail.com>
294 * testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
295 * testsuite/binutils-all/copy-3.d: Likewise.
297 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
299 * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
301 2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
303 * readelf.c (decode_x86_isa): Handle
304 GNU_PROPERTY_X86_ISA_1_AVX512_BF16.
305 * testsuite/binutils-all/i386/pr21231b.d: Updated.
306 * testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
308 2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
310 * testsuite/binutils-all/nm.exp: Count i386-moss as ELF.
312 2019-03-26 Tamar Christina <tamar.christina@arm.com>
314 * testsuite/binutils-all/aarch64/in-order-all.d: Update.
315 * testsuite/binutils-all/aarch64/in-order.d: Likewise.
316 * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
317 * testsuite/binutils-all/aarch64/out-of-order.d: Likewise.
318 * testsuite/binutils-all/aarch64/out-of-order.s: Likewise.
319 * testsuite/binutils-all/arm/in-order-all.d: Likewise.
320 * testsuite/binutils-all/arm/in-order.d: Likewise.
321 * testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
322 * testsuite/binutils-all/arm/out-of-order.d: Likewise.
323 * testsuite/binutils-all/arm/out-of-order.s: Likewise.
325 2019-03-26 Nick Clifton <nickc@redhat.com>
327 * MAINTAINERS: Take over Dave Brolley's maintainerships for FR30,
330 2019-03-26 Alan Modra <amodra@gmail.com>
332 * objdump.c (dump_relocs_in_section): Warning fix.
334 2019-03-25 Tamar Christina <tamar.christina@arm.com>
336 * testsuite/binutils-all/arm/in-order-all.d: New test.
337 * testsuite/binutils-all/arm/in-order.d: New test.
338 * testsuite/binutils-all/arm/objdump.exp: Support .d tests.
339 * testsuite/binutils-all/arm/out-of-order-all.d: New test.
340 * testsuite/binutils-all/arm/out-of-order.T: New test.
341 * testsuite/binutils-all/arm/out-of-order.d: New test.
342 * testsuite/binutils-all/arm/out-of-order.s: New test.
345 2019-03-25 Tamar Christina <tamar.christina@arm.com>
347 * testsuite/binutils-all/aarch64/in-order-all.d: New test.
348 * testsuite/binutils-all/aarch64/out-of-order-all.d: New test.
349 * testsuite/binutils-all/aarch64/out-of-order.d:
351 2019-03-25 Tamar Christina <tamar.christina@arm.com>
353 * testsuite/binutils-all/aarch64/in-order.d: New test.
354 * testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as
357 2019-03-25 Tamar Christina <tamar.christina@arm.com>
359 * objdump.c (disassemble_bytes): Pass stop_offset.
360 * testsuite/binutils-all/aarch64/out-of-order.T: New test.
361 * testsuite/binutils-all/aarch64/out-of-order.d: New test.
362 * testsuite/binutils-all/aarch64/out-of-order.s: New test.
364 2019-03-19 Nick Clifton <nickc@redhat.com>
367 * objdump.c (load_specific_debug_section): Check that the amount
368 of memory to be allocated matches the size of the section.
370 2019-03-13 Sudakshina Das <sudi.das@arm.com>
372 * readelf.c (get_aarch64_dynamic_type): Add case for
374 (dynamic_section_aarch64_val): Likewise.
376 2019-03-13 Sudakshina Das <sudi.das@arm.com>
377 Szabolcs Nagy <szabolcs.nagy@arm.com>
379 * readelf.c (get_aarch64_dynamic_type): New.
380 (get_dynamic_type): Use above for EM_AARCH64.
381 (dynamic_section_aarch64_val): New.
382 (process_dynamic_section): Use above for EM_AARCH64.
384 2019-03-13 Sudakshina Das <sudi.das@arm.com>
386 * readelf.c (decode_aarch64_feature_1_and): New.
387 (print_gnu_property_note): Add case for AArch64 gnu notes.
389 2019-03-12 Alan Modra <amodra@gmail.com>
391 * objdump.c (load_specific_debug_section): Don't compare section
392 size against file size.
393 (dump_relocs_in_section): Don't compare reloc size against file size.
394 Print "failed to read relocs" on bfd_get_reloc_upper_bound error.
396 2019-03-05 Nick Clifton <nickc@redhat.com>
399 * doc/binutils.texi (ar cmdline): Fix spelling mistake.
401 2019-03-05 Nick Clifton <nickc@redhat.com>
403 * po/sv.po: Updated Swedish translation.
405 2019-03-05 Matthew Malcomson <matthew.malcomson@arm.com>
408 * testsuite/lib/binutils-common.exp (run_dump_test): Replace a use
409 of "lmap" with a "foreach" loop.
411 2019-03-04 Nick Clifton <nickc@redhat.com>
414 * objcopy.c (copy_archive): Do not copy thin archives.
416 2019-02-27 Matthew Malcomson <matthew.malcomson@arm.com>
418 * testsuite/lib/binutils-common.exp: Allow multiple "as" lines.
420 2019-02-25 Nick Clifton <nickc@redhat.com>
422 * objdump.c (sym_ok): New function.
423 (find_symbol_for_address): Use new function.
424 (disassemble_section): Compare sections by name, not pointer.
425 (dump_dwarf): Move code to initialise byte_get pointer and iterate
426 over separate debug files from here to ...
427 (dump_bfd): ... here. Add parameter indicating that a separate
428 debug info file is being dumped. For main file, pull in the
429 symbol tables from all separate debug info files.
430 (display_object): Update call to dump_bfd.
431 * doc/binutils.texi: Document extened behaviour of the
432 --dwarf=follow-links option.
433 * NEWS: Mention this new feature.
434 * testsuite/binutils-all/objdump.WK2: Update expected output.
435 * testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add
436 options and dump file parameters.
438 * testsuite/binutils-all/objdump.WK3: New file.
439 * testsuite/binutils-all/readelf.exp: Change expected output for
441 * testsuite/binutils-all/readelf.wKis: New file.
443 2019-02-22 Nick Clifton <nickc@redhat.com>
446 * dwarf.h (struct separate_info): New structure for containing
447 information on separate debug info files.
448 * dwarf.c (struct dwo_info): New structure for containing dwo
450 (first_dwo_info): Chain of dwo_info structures.
451 (first_separate_file): Chain of separate_info structures.
452 (separate_debug_file, separate_debug_filename): Delete.
453 (fetch_alt_indirect_string): Scan all separate debug info files
454 for the requested string.
455 (add_dwo_info): New function.
456 (add_dwo_name): New function.
457 (add_dwo_dir): New function.
458 (add_dwo_id: New function.
459 (free_dwo_info): New function.
460 (read_and_display_attr_value): Store DWO data using the new
462 (load_debug_section_with_follow): If necessary, scan the list of
463 separate debug info files for the requested section.
464 (add_separate_debug_file): New function.
465 (load_separate_debug_info): Call add_separate_debug_file to store
466 the information on the newly loaded file.
467 (load_dwo_file): Likewise.
468 (load_separate_debif_file): Rename to load_separate_debug_files.
469 Change return type to boolean. If following links then attempt to
470 load all separate debug info files, not just the first one.
471 (free_debug_memory): Release memory in dwo_info and separate_info
473 * objdump.c (dump_dwarf): Iterate over all loaded debg info files.
474 * readelf.c (process_object): Likewise.
475 * doc/debug.options.texi: Update descriptions of links and
476 follow-links options.
477 * testsuite/binutils-all/objdump.WK2: Update expected output.
478 * testsuite/binutils-all/readelf.k2: Likewise.
479 * NEWS: Announce the new feature.
481 2019-02-21 Nick Clifton <nickc@redhat.com>
484 * unwind-ia64.c: Include sysdep.h.
485 (unw_decode_x1): Check current pointer against end pointer before
487 (unw_decode_x2): Likewise.
488 (unw_decode_x3): Likewise.
489 (unw_decode_x4): Likewise.
490 (unw_decode_r2): Likewise.
491 (unw_decode_p2_p5): Likewise.
492 (unw_decode_p7_p10): Likewise.
493 (unw_decode): Likewise.
495 2019-02-20 Nick Clifton <nickc@redhat.com>
498 * readelf.c (print_stapsdt_note): Harden against corrupt notes.
501 * unwind-ia64.c (unw_decode_uleb128): Add end parameter, use it to
502 prevent walking off the end of the buffer.
503 (unw_decode_x1): Add end paramter, pass it to unw_decode_uleb128.
504 (unw_decode_x2): Likewise.
505 (unw_decode_x3): Likewise.
506 (unw_decode_x4): Likewise.
507 (unw_decode_r2): Pass the end parameter to unw_decode_uleb128.
508 (unw_decode_r3): Likewise.
509 (unw_decode_p7_p10): Likewise.
510 (unw_decode_b2): Likewise.
511 (unw_decode_b3_x4): Likewise.
514 * readelf.c (process_mips_specific): Check for an options section
515 that is too small to even contain a single option.
518 * readelf.c (print_ia64_vms_note): Harden against corrupt notes.
520 2019-02-20 Alan Modra <amodra@gmail.com>
524 * readelf.c (get_data): Avoid possibility of overflow when
525 checking for a read that may extend past end of file.
526 (process_program_headers): Likewise.
528 2019-02-20 Alan Modra <amodra@gmail.com>
531 * objdump.c (dump_bfd_private_header): Print warning if
532 bfd_print_private_bfd_data returns false.
534 2019-02-12 Nick Clifton <nickc@redhat.com>
537 * README-how-to-make-a-release: Use git clean to delete spurious
538 files from the local source repository.
540 2019-02-08 Andrew Burgess <andrew.burgess@embecosm.com>
542 * size.c (berkeley_format): Delete.
543 (enum output_format): New enum.
544 (selected_output_format): New variable.
545 (usage): Update to mention GNU format.
546 (main): Update to extract options, and select format as needed.
547 Handle GNU format where needed.
548 (berkeley_sum): Renamed to...
549 (berkeley_or_gnu_sum): ...this, and updated to handle both formats.
550 (berkeley_format): Renamed to...
551 (berkeley_or_gnu_format): ...this, and updated to handle both
553 (print_sizes): Handle GNU format.
554 * doc/binutils.texi (size): Document new GNU format.
555 * testsuite/binutils-all/size.exp: Add test of extended
557 * NEWS: Mention new functionality.
559 2019-02-08 Andrew Burgess <andrew.burgess@embecosm.com>
561 * doc/binutils.texi (size): Update example output for Berkeley
564 2019-02-07 Nick Clifton <nickc@redhat.com>
566 * README-how-to-make-a-release: Add a note about updating the
567 obsolete targets in the bfd/config.bfd file.
569 2019-02-04 Nick Clifton <nickc@redhat.com>
571 * README-how-to-make-a-release: Add more notes on making a release.
573 2019-01-25 Nick Clifton <nickc@redhat.com>
576 * readelf.c (process_notes_at): Prevent an illegal memory access
577 when the note's namesize is zero.
578 (decode_tic6x_unwind_bytecode): Add code to handle the case where
579 no registers are specified in a frame pop instruction.
581 2019-01-25 Nick Clifton <nickc@redhat.com>
583 * po/bg.po: Updated Bulgarian translation.
585 2019-01-23 Nick Clifton <nickc@redhat.com>
587 * po/fr.po: Updated French translation.
588 * po/pt.po: Updated Portuguese translation.
590 2019-01-21 Nick Clifton <nickc@redhat.com>
592 * po/uk.po: Updated Ukranian translation.
594 2019-01-19 Nick Clifton <nickc@redhat.com>
596 * configure: Regenerate.
597 * binutils/po/binutils.pot.
599 * README-how-to-make-a-release: Update description on how to make
602 2018-06-24 Nick Clifton <nickc@redhat.com>
606 2019-01-17 Nick Clifton <nickc@redhat.com>
608 * objdump.c (disassemble_section): When disassembling from a
609 symbol only stop at the next symbol if the original symbol was not
610 a function symbol. Otherwise continue disassembling until a new
612 * testsuite/binutils-all/objdump.exp: Add tests of extended
614 * testsuite/binutils-all/disasm.s: New test source file.
616 2019-01-16 Kito Cheng <kito@andestech.com>
617 Nelson Chu <nelson@andestech.com>
619 * readelf.c (get_riscv_section_type_name): New function.
620 (get_section_type_name): Add handler for RISC-V.
621 (riscv_attr_tag_t): Declare.
622 (riscv_attr_tag): New.
623 (display_riscv_attribute): New function.
624 (process_attributes): Add handler for RISC-V.
625 * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute
628 2019-01-10 Nick Clifton <nickc@redhat.com>
631 * objdump.c (sanitize_string): New function. Removes control
632 characters from symbol names.
633 (dump_section_header): Use new function.
634 (objdump_print_symname): Likewise.
635 (objdump_print_addr_with_sym): Likewise.
636 (show_line): Likewise.
637 (disassemble_bytes): Likewise.
638 (disassemble_section): Likewise.
639 (load_specific_debug_section): Likewise.
640 (read_section_stabs): Likewise.
641 (print_section_stabs): Likewise.
642 (dump_section): Likewise.
643 (dump_reloc_set): Likewise.
644 (dump_relocs_in_section): Likewise.
645 (dump_bfd): Likewise.
646 (display_any_bfd): Likewise.
648 2019-01-09 Nick Clifton <nickc@redhat.com>
651 * readelf.c (process_archive): Use arch.file_name in error
652 messages until the qualified name is available.
654 2019-01-09 Andrew Paprocki <andrew@ishiboo.com>
656 * configure: Regenerate.
658 2019-01-09 Alan Modra <amodra@gmail.com>
660 * testsuite/binutils-all/cxxfilt.exp: Pass --no-strip-underscores
661 unconditionally to tests needing the option rather than via a
664 2019-01-08 Nick Clifton <nickc@redhat.com>
667 * cxxfilt.c (hp_symbol_characters): Delete.
668 (main): Remove depcreated demangling styles.
669 * stabs.c (parse_stab_argtypes): Remove support for old gnu v2
671 * testsuite/binutils-all/cxxfilt.exp: Use the
672 --no-strip-underscore option for targets that do prefix their
673 symbols with underscores.
674 Update tests to eliminate those that use gnu v2 encoding.
676 2019-01-08 Tamar Christina <tamar.christina@arm.com>
679 * testsuite/binutils-all/copy-6.d: New test.
680 * testsuite/binutils-all/objcopy.exp: Use it.
682 2019-01-08 Alan Modra <amodra@gmail.com>
684 * testsuite/lib/binutils-common.exp (run_dump_test): Don't prepend
685 $srcdir/$subdir to source file name if it starts with "./".
687 2019-01-05 Yoshinori Sato <ysato@users.sourceforge.jp>
689 * readelf.c (get_machine_flags): Add RXv3 output.
691 2019-01-04 Nick Clifton <nickc@redhat.com>
694 * objdump.c (load_specific_debug_section): Check for integer
695 overflow before attempting to allocate contents.
697 2019-01-04 Nick Clifton <nickc@redhat.com>
700 * objcopy.c (copy_object): Free dhandle after writing out the
702 * objdump.c (dump_bfd): Free dhandle after printing out the debug
706 2019-01-01 Alan Modra <amodra@gmail.com>
708 Update year range in copyright notice of all files.
710 For older changes see ChangeLog-2018
712 Copyright (C) 2019 Free Software Foundation, Inc.
714 Copying and distribution of this file, with or without modification,
715 are permitted in any medium without royalty provided the copyright
716 notice and this notice are preserved.
722 version-control: never