1 2020-05-04 Alan Modra <amodra@gmail.com>
3 * readelf.c (process_nds32_specific): Check size of .nds32_e_flags
4 section. Don't assume endian of host matches nds32 target. Free
7 2020-05-01 Alan Modra <amodra@gmail.com>
8 Haim Shimonovich <Haim.Shimonovich@ceva-dsp.com>
10 * objdump.c (disassemble_bytes): Don't scan for zeros when
11 disassembling zeros. Translate "resuming at file offset" message.
12 Formatting. Replace some signed variables with unsigned.
14 2020-04-30 Alex Coplan <alex.coplan@arm.com>
16 * testsuite/binutils-all/aarch64/in-order-all.d: Update to use new
18 * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
20 2020-04-30 Nick Clifton <nickc@redhat.com>
22 * testsuite/lib/binutils-common.exp (check_pie_support): New
25 2020-04-29 Andrew Burgess <andrew.burgess@embecosm.com>
27 * dwarf.c (display_debug_ranges): Ignore duplicate entries in
28 range_entries for the same offset.
30 2020-04-29 Nick Clifton <nickc@redhat.com>
32 * readelf.c (warn): New function - like elfcomm.c version but only
33 produces output if warnings are enabled.
34 (struct options): Add --lint and --enable-checks.
35 (usage): Add entry for --lint.
36 (parse_args): Handle -L. If checks are enabled but no dumps have
37 been selected then enable all dumps.
38 (process_section_headers): Replace long if-then-else sequence with
39 a switch. Add warning messages for empty SHT_REL, SHT_RELA and
40 SHT_PROGBITS sections.
41 (process_file): Do not complain if the file is an archive and lint
42 mode has been enabled.
43 * elfcomm.c (error): Make the function weak.
45 * NEWS: Mention the new feature.
46 * doc/binutils.texi: Document the new feature.
47 * dwarf.h (report_leb_status): Add file name and line number
48 parameters. Include them in the diagnostic output.
49 (READ_ULEB): Pass file and line number to report_leb_status.
50 (READ_SLEB): Likewise.
51 * dwarf.c (read_and_print_leb128): Pass file and line number to
53 * testsuite/binutils-all/readelf.exp: Add test of new feature.
54 * testsuite/binutils-all/zero-sec.s: New test source file.
55 * testsuite/binutils-all/zero-sec.r: Expected output from new
58 2020-04-29 Nick Clifton <nickc@redhat.com>
60 * po/sr.po: Updated Serbian translation.
62 2020-04-26 Alan Modra <amodra@gmail.com>
64 * readelf.c (get_num_dynamic_syms): Check DT_MIPS_XHASH was
65 read before dereferencing, and gracefully return. Remove
66 gnu_hash_error variable. Free gnu hash arrays if number of
69 2020-04-24 Alan Modra <amodra@gmail.com>
71 * readelf.c (get_num_dynamic_syms): Check for nbuckets and nchains
73 (process_dynamic_section): Call get_num_dynamic_syms once rather
74 than in segment loop. Break out of segment loop on a successful
75 load of dynamic symbols. Formatting.
76 (process_object): Return error status from process_dynamic_section.
78 2020-04-23 Anton Kolesov <anton.kolesov@synopsys.com>
80 * elf-bfd.h (elfcore_write_arc_v2): Add prototype.
81 * elf.c (elfcore_grok_arc_v2): New function.
82 (elfcore_grok_note): Call the new function to handle the corresponding
84 (elfcore_write_arc_v2): New function.
85 (elfcore_write_register_note): Call the new function to handle the
86 corresponding pseudo-sections.
88 2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
91 * readelf.c (is_none_reloc): Recognize
92 BFD_RELOC_XTENSA_PDIFF{8,16,32} and
93 BFD_RELOC_XTENSA_NDIFF{8,16,32}.
95 2020-04-22 Nick Clifton <nickc@redhat.com>
97 * MAINTAINERS: Remove Chris Faylor as the ix86 PE maintainer.
99 2020-04-22 Alan Modra <amodra@gmail.com>
101 * readelf.c (archive_file_offset, archive_file_size, dynamic_addr),
102 (dynamic_size, dynamic_nent, dynamic_strings, dynamic_strings_length),
103 (num_dynamic_syms, nbuckets, nchains, buckets, chains),
104 (ngnubuckets, gnubuckets, gnuchains, mipsxlat, ngnuchains),
105 (gnusymidx, dynamic_symbols, dynamic_syminfo, dynamic_syminfo_offset),
106 (dynamic_syminfo_nent, program_interpreter, dynamic_info),
107 (dynamic_info_DT_GNU_HASH, dynamic_info_DT_MIPS_XHASH, version_info),
108 (dynamic_section, symtab_shndx_list, group_count, section_groups),
109 (section_headers_groups): Move to struct filedata. Update use
112 2020-04-22 Alan Modra <amodra@gmail.com>
114 * readelf.c (struct dump_data): New, used..
115 (cmdline): ..here, and..
116 (struct filedata): ..here. Adjust all uses.
117 (request_dump_bynumber, request_dump, parse_args): Pass in a
118 struct dump_data* rather than Filedata*. Adjust callers.
119 (main): Don't set cmdline.file_name.
121 2020-04-20 Alan Modra <amodra@gmail.com>
123 * readelf.c (process_symbol_table): Clear ngnuchains, ngnubuckets
126 2020-04-20 Alan Modra <amodra@gmail.com>
128 * readelf.c (process_section_headers): Free dynamic symbols etc.
131 2020-04-20 Alan Modra <amodra@gmail.com>
133 * readelf.c (get_num_dynamic_syms): Formatting. Don't return
134 on error without freeing.
135 (process_dynamic_section): Don't recreate dynamic symbols from
136 dynamic tag info when the dynamic symbols have already been
137 read via section headers.
139 2020-04-17 Fredrik Strupe <fredrik@strupe.net>
141 * testsuite/binutils-all/arm/vdup-cond.d: New test for testing that
142 conditional VDUP instructions are disassembled correctly.
143 * testsuite/binutils-all/arm/vdup-cond.s: New file used by
145 * testsuite/binutils-all/arm/vdup-thumb.d: New test for testing
146 that VDUP instructions (which are conditional in A32) can be
147 disassembled in thumb mode.
148 * testsuite/binutils-all/arm/vdup-cond.s: New file used by
151 2020-04-17 Alan Modra <amodra@gmail.com>
154 * debug.c (debug_class_type_samep): Don't segfault on NULL type.
156 2020-04-16 Alan Modra <amodra@gmail.com>
158 * doc/binutils.texi: Mention --no-show-raw-insn in objdump
159 --no-addresses description.
161 2020-04-15 Alan Modra <amodra@gmail.com>
163 * objdump.c (no_addresses): New static var.
164 (usage): Print help for --no-addresses.
165 (long_options): Add --no-addresses entry.
166 (objdump_print_addr_with_sym, objdump_print_addr): Omit symbol address.
167 (disassemble_bytes): Don't print current line address, or reloc
169 * doc/binutils.texi: Document objdump --no-addresses.
171 2020-04-15 Alan Modra <amodra@gmail.com>
174 * readelf.c (get_num_dynamic_syms): Don't set num_of_syms when
175 reading buckets or chains fails.
177 2020-04-15 Alan Modra <amodra@gmail.com>
179 * readelf.c (process_symbol_table): Zero gnubuckets, gnuchains
182 2020-04-15 Alan Modra <amodra@gmail.com>
184 * readelf.c (get_group_flags): Translate text.
185 (get_file_type, get_symbol_binding, get_symbol_type),
186 (get_ppc64_symbol_other, get_symbol_other): Increase size of buffer.
188 2020-04-15 Alan Modra <amodra@gmail.com>
191 * readelf.c (get_num_dynamic_syms): Typo fix.
193 2020-04-14 Alan Modra <amodra@gmail.com>
195 * readelf.c (process_mips_specific): Free eopt and iopt. Avoid
196 possibility of overflow when checking number of conflicts.
198 2020-04-14 H.J. Lu <hongjiu.lu@intel.com>
201 * readelf.c (nbuckets): New.
205 (ngnubuckets): Likewise.
206 (gnubuckets): Likewise.
207 (gnuchains): Likewise.
208 (mipsxlat): Likewise.
209 (ngnuchains): Likewise.
210 (gnusymidx): Likewise.
211 (VALID_SYMBOL_NAME): Likewise.
212 (VALID_DYNAMIC_NAME): Use it.
213 (get_dynamic_data): Moved before process_dynamic_section.
214 (get_num_dynamic_syms): New function.
215 (process_dynamic_section): Use DT_SYMTAB, DT_SYMENT, DT_HASH,
216 DT_GNU_HASH and DT_MIPS_XHASH to reconstruct dynamic symbol
217 table. Use DT_STRTAB and DT_STRSZ to reconstruct dynamic string
219 (get_symbol_index_type): Don't print "bad section index" when
220 there is no section header.
221 (print_dynamic_symbol): Rewrite.
222 (process_symbol_table): Call print_dynamic_symbol to dump dynamic
225 2020-04-02 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
227 * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Don't
228 enable on *-*-solaris*.
230 2020-03-30 Nick Clifton <nickc@redhat.com>
233 * objcopy.c (copy_object): When copying PE format files set the
234 timestamp field in the pe_data structure if the preserve_dates
236 * testsuite/binutils-all/objcopy.exp (objcopy_test) Use
237 --preserve-dates in place of the -p option, in order to make its
240 2020-03-28 Alan Modra <amodra@gmail.com>
242 * testsuite/binutils-all/objcopy.exp (objcopy_test): Only
243 clear_xfail hppa*-*-*elf*. Revert mips xfails.
245 2020-03-28 Alan Modra <amodra@gmail.com>
247 * testsuite/binutils-all/objcopy.exp (objcopy_test): Move xfails
248 from here to calls. Remove "m8*-*-*" entry. Don't xfail tic54x
249 but do xfail spu, mipstx39 and mips-sgi-irix for the executable
250 test. Pass "-p" to objcopy for the executable test.
252 2020-03-27 Jozef Lawrynowicz <jozef.l@mittosystems.com>
255 * testsuite/binutils-all/objcopy.exp (objcopy_test): Add argument to
256 specify whether an object file or executable should be built and tested.
257 Change test names to report whether an object file or executable is
259 * testsuite/binutils-all/pr25662.ld: New test.
260 * testsuite/binutils-all/pr25662.s: New test.
262 2020-03-27 Alan Modra <amodra@gmail.com>
264 * readelf.c (process_archive): Don't double free qualified_name.
265 Don't break out of loop with "negative" archive_file_size, just
266 set file offset to max.
268 2020-03-25 Alan Modra <amodra@gmail.com>
270 * readelf.c (process_archive): Prevent endless loop.
272 2020-03-24 H.J. Lu <hongjiu.lu@intel.com>
275 * nm.c (print_symname): Replace _bfd_elf_get_symbol_version_name
276 with bfd_get_symbol_version_string.
277 (print_symbo): Pass TRUE to bfd_get_symbol_version_string.
278 * objdump.c (objdump_print_symname): Likewise.
280 2020-03-24 H.J. Lu <hongjiu.lu@intel.com>
283 * nm.c (SYM_NAME): Removed.
284 (print_symname): Add a pointer to struct extended_symbol_info
285 argument. Call _bfd_elf_get_symbol_version_name to get symbol
287 (print_symdef_entry): Pass NULL to print_symname.
288 (print_symbol_info_bsd): Update call to print_symname.
289 (print_symbol_info_sysv): Likewise.
290 (print_symbol_info_posix): Likewise.
292 2020-03-24 Alan Modra <amodra@gmail.com>
294 * readelf.c (process_mips_specific): Free iconf on error path.
296 2020-03-23 Nick Clifton <nickc@redhat.com>
299 * wrstabs.c (stab_pop_type): Replace assertion with error return.
300 * write_stabs_in_sections_debugging_info: Likewise.
301 * stab_enum_type: Likewise.
302 * stab_modify_type: Likewise.
303 * stab_struct_field: Likewise.
304 * stab_end_struct_type: Likewise.
305 * stab_start_class_type: Likewise.
306 * stab_class_static_member: Likewise.
307 * stab_class_baseclass: Likewise.
308 * stab_class_start_method: Likewise.
309 * stab_class_method_var: Likewise.
310 * stab_class_end_method: Likewise.
311 * stab_end_class_type: Likewise.
312 * stab_typedef_type: Likewise.
313 * stab_start_function: Likewise.
314 * stab_end_block: Likewise.
315 * stab_lineno: Likewise.
317 2020-03-20 Nick Clifton <nickc@redhat.com>
319 * readelf.c (get_compression_header): Add ATTRIBUTE_WARN_UNUSED_RESULT.
320 (process_section_headers): Check the return value from
321 get_compression_header.
322 (dump_section_as_strings): Likewise.
323 (dump_section_as_bytes): Likewise.
324 (load_specific_debug_section): Likewise.
326 2020-03-20 H.J. Lu <hongjiu.lu@intel.com>
328 * ar.c (main): Update bfd_plugin_set_program_name call.
329 * nm.c (main): Likewise.
331 2020-03-19 Nick Clifton <nickc@redhat.com>
334 * testsuite/binutils-all/dw4.s: New test source file.
335 * testsuite/binutils-all/nm.exp: Run the new test.
337 2020-03-19 H.J. Lu <hongjiu.lu@intel.com>
339 * readelf.c (process_symbol_table): Use unsigned long for si.
341 2020-03-19 Alan Modra <amodra@gmail.com>
343 * elfcomm.c: Don't include bfd.h or bucomm.h.
344 (program_name): Declare.
345 (process_archive_index_and_symbols): Replace bfd_boolean with int,
346 and substitute FALSE and TRUE.
347 (setup_archive, setup_nested_archive): Likewise.
348 * elfcomm.h: Likewise.
350 2020-03-19 Alan Modra <amodra@gmail.com>
352 * readelf.c (process_archive): Always return via path freeing
355 2020-03-19 Alan Modra <amodra@gmail.com>
357 * readelf.c (process_netbsd_elf_note): Validate descsz before
358 accessing descdata. Formatting.
360 2020-03-19 Alan Modra <amodra@gmail.com>
362 * elfcomm.c (setup_archive): Make file_size an off_t. Comment.
363 * elfcomm.h (setup_archive): Update prototype.
365 2020-03-16 Alan Modra <amodra@gmail.com>
367 * readelf.c (get_symbols): New function.
368 (process_relocs, ia64_process_unwind, hppa_process_unwind),
369 (arm_process_unwind, get_symbol_for_build_attribute): Use it.
371 2020-03-16 Alan Modra <amodra@gmail.com>
373 * unwind-ia64.c (unw_decode_uleb128): Prevent overlarge shifts.
374 Detect shift overflows and check that terminating byte is found.
375 Print an error on a bad uleb128.
377 2020-03-14 Alan Modra <amodra@gmail.com>
379 * readelf.c (process_file): Clean ba_cache.
381 2020-03-14 Alan Modra <amodra@gmail.com>
383 * elfcomm.h (setup_archive): Update prototype.
384 * elfcomm.c (setup_archive): Add file_size parameter and sanity
385 check longnames_size.
386 (setup_nested_archive): Get file size and pass to setup_archive.
387 * elfedit.c (process_archive): Likewise.
388 * readelf.c (process_archive): Pass filedata->file_size to
391 2020-03-14 Alan Modra <amodra@gmail.com>
393 * readelf.c (dump_section_as_strings): Free memory on error exit.
394 (dump_section_as_bytes, process_notes_at): Likewise.
395 (get_build_id): Free enote.
397 2020-03-13 Kamil Rytarowski <n54@gmx.com>
399 * readelf.c (get_netbsd_elfcore_note_type): Add support for
400 NT_NETBSDCORE_LWPSTATUS notes.
402 2020-03-13 Alan Modra <amodra@gmail.com>
404 * elfcomm.c (get_archive_member_name): Always return malloc'd
406 * elfedit.c (process_archive): Tidy memory on all return paths.
407 * readelf.c (process_archive): Likewise.
408 (process_symbol_table): Likewise.
409 (ba_cache): New, replacing ..
410 (get_symbol_for_build_attribute): ..static vars here. Free
411 strtab and symtab before loading new ones. Reject symtab without
412 valid strtab in loop, breaking out of loop on valid symtab.
413 (process_file): Free ba_cache symtab and strtab here, resetting
416 2020-03-12 Alan Modra <amodra@gmail.com>
418 * readelf.c (process_section_headers): Don't just set
419 filedata->section_headers NULL, free it first. Similarly for
420 dynamic_symbols, dynamic_strings, dynamic_syminfo and
421 symtab_shndx_list. Zero associated counts too.
422 (process_object): Free symtab_shndx_list.
423 (process_file): Free various allocated filedata tables.
425 2020-03-11 Nick Clifton <nickc@redhat.com>
429 * dwarf.h (DWARF2_Internal_LineInfo): Add li_address_size and
430 li_segment_size fields.
431 * dwarf.c (read_debug_line_header): Record the address size and
432 segment selector size values (if present) in the lineinfo
434 (display_formatted_table): Warn if the format count is empty but
435 the table itself is not empty.
436 Display the format count and entry count at the start of the table
438 (display_debug_lines_raw): Display the address size and segement
439 selector size fields, if present.
440 * testsuite/binutils-all/dw5.W: Update expected output.
442 2020-03-11 Alan Modra <amodra@gmail.com>
445 * objcopy.c (copy_object): Test "gaps" not gap_fill_set or
446 pad_to_set on second block of code dealing with padding.
447 Replace "c" with "num_sec" and don't recalculate number of
448 sections on second block. Size arrays using sizeof (element)
449 rather than sizeof (element type).
451 2020-03-10 Alan Modra <amodra@gmail.com>
453 * objdump.c (disassemble_section): Don't call qsort unless
454 sym count is at least two.
455 (disassemble_data): Don't call memcpy with NULL src.
457 2020-03-09 Alan Modra <amodra@gmail.com>
460 * readelf.c (dump_ia64_vms_dynamic_fixups): Pass size and nmemb
461 to get_data rather than multiplying.
462 (dump_ia64_vms_dynamic_relocs): Likewise.
463 (process_version_sections): Correct order of size and nmemb args
465 (process_mips_specific): Likewise.
467 2020-03-08 H.J. Lu <hongjiu.lu@intel.com>
469 * readelf.c (get_dynamic_data): Replace "memory chekers" with
470 "memory checkers" in comments.
472 2020-03-06 Simon Marchi <simon.marchi@efficios.com>
475 * doc/Makefile.am: Rename MOSTLYCLEANFILES to MAINTAINERCLEANFILES.
476 * doc/Makefile.in: Re-generate.
478 2020-03-06 Nick Clifton <nickc@redhat.com>
480 * objcopy.c (check_new_section_flags): New function. Reject the
481 SEC_COFF_SHARED flag if the target is not a COFF binary.
482 (copy_object): Call check_new_section_flags.
483 (setup_section): Likewise.
484 * doc/binutils.texi (objcopy): Add a note that the 'share' section
485 flag cannot be applied to ELF binaries.
487 2020-03-06 Alan Modra <amodra@gmail.com>
490 * objcopy.c (filter_symbols): Correct rem_leading_char logic.
492 2020-03-05 Alan Modra <amodra@gmail.com>
495 * objcopy.c (filter_symbols): Don't segfault on NULL
496 prefix_symbols_string.
498 2020-03-04 Christian Eggers <ceggers@gmx.de>
500 * objcopy.c (copy_object): Convert from bytes to octets for
501 --gap-fill and --pad-to.
503 2020-03-03 Nick Clifton <nickc@redhat.com>
506 * prdbg.c (pr_tag_type): Remove call to abort.
508 2020-03-02 Aaron Merey <amerey@redhat.com>
510 * binutils/testsuite/binutils-all/debuginfod.exp: Improve port
513 2020-03-02 Nick Clifton <nickc@redhat.com>
516 * readelf.c (dump_section_as_strings): Display new-line characters
517 as \n and then insert a line break.
518 * testsuite/binutils-all/pr25543.s: New test.
519 * testsuite/binutils-all/pr25543.d: Test driver.
520 * testsuite/binutils-all/readelf.exp: Run the new test.
522 2020-02-27 Nick Clifton <nickc@redhat.com>
525 * readelf.c (process_ia64_vms_dynamic_relocs): Check to see if
526 get_data is unable to load the string table.
528 2020-02-26 Alan Modra <amodra@gmail.com>
530 * elfedit.c: Indent labels correctly.
531 * readelf.c: Likewise.
532 * resres.c: Likewise.
534 2020-02-25 H.J. Lu <hongjiu.lu@intel.com>
537 * ar.c (main): Pass 0 to bfd_plugin_set_program_name.
538 * nm.c (main): Pass 1 to bfd_plugin_set_program_name.
540 2020-02-24 Nick Clifton <nickc@redhat.com>
543 * doc/binutils.texi (objdump): Fix typo in description of
546 2020-02-20 Nelson Chu <nelson.chu@sifive.com>
548 * dwarf.c (regname_internal_riscv): Updated since the DECLARE_CSR
551 2020-02-19 Jordan Rupprecht <rupprecht@google.com>
553 * objdump.c (show_line): call bfd_demangle when using do_demangle.
555 2020-02-19 Andrew Burgess <andrew.burgess@embecosm.com>
557 * configure: Regenerate.
559 2020-02-10 Fangrui Song <maskray@google.com>
561 * objcopy.c (parse_flags): Handle "exclude".
562 * doc/binutils.texi: Document the support.
564 2020-02-10 Aaron Merey <amerey@redhat.com>
566 * binutils/testsuite/binutils-all/debuginfod.exp:
567 Replace set ::env with setenv.
568 Start server before setting environment variable.
569 Specify tmpdir as the location of the server's
571 Check additional server metrics at start-up.
573 2020-02-07 Nick Clifton <nickc@redhat.com>
575 * README-how-to-make-a-release: Add note about updating the
576 GAS/NEWS URL in the next release.
578 2020-02-07 Sergey Belyashov <sergey.belyashov@gmail.com>
581 * readelf.c (get_machine_flags): Add support for Z80N machine
584 2020-02-07 Nick Clifton <nickc@redhat.com>
586 * dwarf.c (display_debug_lines_decoded): Force a NUL termination
587 of the truncated file name.
589 2020-02-06 Andrew Burgess <andrew.burgess@embecosm.com>
591 * objdump.c (print_jump_visualisation): New function.
592 (disassemble_bytes): Call new function.
594 2020-02-06 Alan Modra <amodra@gmail.com>
596 * testsuite/lib/binutils-common.exp (match_target): Accept '!' before
598 (supports_gnu_osabi): New procedure.
599 (is_generic): New, from ld-lib.exp.
600 (supports_gnu_unique): Use the above.
602 2020-02-04 Alan Modra <amodra@gmail.com>
604 * Makefile.am (CFILES): Add od-elf32_avr.c.
605 * Makefile.in: Regenerate.
606 * po/POTFILES.in: Regenerate.
608 2020-02-03 Andreas Schwab <schwab@linux-m68k.org>
610 * readelf.c (dump_relocations, dump_relocations)
611 (decode_arm_unwind_bytecode, process_dynamic_section)
612 (get_symbol_visibility, get_alpha_symbol_other): Add newline to
615 2020-02-03 Sergei Trofimovich <siarheit@google.com>
617 * coffdump.c (program_name): Drop redundant definition.
618 * srconv.c (program_name): Likewise
619 * sysdump.c (program_name): Likewise
621 2020-02-02 H.J. Lu <hongjiu.lu@intel.com>
624 * objdump.c (sym_ok): Return FALSE if 2 sections are in the
625 same file with different section pointers.
627 2020-02-01 Nick Clifton <nickc@redhat.com>
629 * README-how-to-make-a-release: Update with more details on the
630 release making process.
632 2020-01-31 Nick Clifton <nickc@redhat.com>
634 * po/sv.po: Updated Swedish translation.
636 2020-01-28 Nick Clifton <nickc@redhat.com>
638 * readelf.c (get_build_id): Simplify warning message about corrupt
639 notes encountered whilst scanning for the build-id.
641 2020-01-27 Roland McGrath <mcgrathr@google.com>
643 * objcopy.c (compare_gnu_build_notes): Fix comparison results
644 for overlapping ranges so that (A == B) == (B == A) holds.
646 2020-01-27 Alan Modra <amodra@gmail.com>
648 * testsuite/lib/binutils-common.exp (big_or_little_endian): Replace
649 case statement with switch statement.
651 2020-01-24 Nick Clifton <nickc@redhat.com>
653 * readelf.c (get_build_id): Fix warning messages about corrupt
656 2020-01-23 Nick Clifton <nickc@redhat.com>
658 * po/fr.po: Updated French translation.
660 2020-01-22 Yuri Chornoivan <yurchor@mageia.org>
663 * readelf.c (get_alpha_symbol_other): Fix error message typo.
665 2020-01-20 Nick Clifton <nickc@redhat.com>
667 * po/pt.po: Updated Portuguese translation.
668 * po/uk.po: Updated Ukranian translation.
670 2020-01-18 Nick Clifton <nickc@redhat.com>
672 * README-how-to-make-a-release: Update notes on how to cut a
673 branch for a release.
675 2020-01-18 Nick Clifton <nickc@redhat.com>
677 * configure: Regenerate.
678 * po/binutils.pot: Regenerate.
680 2020-01-18 Nick Clifton <nickc@redhat.com>
682 Binutils 2.34 branch created.
684 2020-01-17 Thomas Troeger <tstroege@gmx.de>
686 * objdump.c (jump_info_visualize_address): Discard jumps that are
688 (disassemble_bytes): Only compute the maximum level if jumps were
691 2020-01-13 Nick Clifton <nickc@redhat.com>
693 * objdump.c (disassemble_bytes): Remove C99-ism.
694 * testsuite/binutils-all/debuginfod.exp: New tests.
696 2020-01-13 Thomas Troeger <tstroege@gmx.de>
698 * objdump.c (visualize_jumps, color_output, extended_color_output)
699 (detected_jumps): New variables.
700 (usage): Add the new jump visualization options.
701 (option_values): Add new option value.
702 (long_options): Add the new option.
703 (jump_info_new, jump_info_free): New functions.
704 (jump_info_min_address, jump_info_max_address): Likewise.
705 (jump_info_end_address, jump_info_is_start_address): Likewise.
706 (jump_info_is_end_address, jump_info_size): Likewise.
707 (jump_info_unlink, jump_info_insert): Likewise.
708 (jump_info_add_front, jump_info_move_linked): Likewise.
709 (jump_info_intersect, jump_info_merge): Likewise.
710 (jump_info_sort, jump_info_visualize_address): Likewise.
711 (disassemble_jumps): New function - used to locate jumps.
712 (disassemble_bytes): Add ascii art generation.
713 (disassemble_section): Add scan to locate jumps.
714 (main): Parse the new visualization option.
715 * doc/binutils.texi: Document the new feature.
716 * NEWS: Mention the new feature.
718 2020-01-13 Alan Modra <amodra@gmail.com>
722 * dwarf.c (display_debug_frames): Move fde_fc earlier. Free
723 fde_fc col_type and col_offset.
724 * readelf.c (apply_relocations): Move symsec check earlier.
725 (free_debug_section): Free reloc_info.
726 (process_notes_at): Free pnotes on error path.
727 (process_object): Free dump_sects here..
728 (process_archive): ..not here.
730 2020-01-13 Alan Modra <amodra@gmail.com>
733 * nm.c (display_rel_file): Free dyn_syms.
735 2020-01-09 Nick Clifton <nickc@redhat.com>
738 * objcopy.c (empty_name): New variable.
739 (need_sym_before): Prevent an attempt to free a static variable.
740 (filter_symbols): Avoid strcmp test by checking for pointer
743 2020-01-09 Nick Clifton <nickc@redhat.com>
745 * po/zh_TW.po: Updated Traditional Chinese translation.
747 2020-01-09 Aaron Merey <amerey@redhat.com>
749 * Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod.
750 * Makefile.in: Regenerate.
752 * config.in: Regenerate.
753 * configure: Regenerate.
754 * configure.ac: Call AC_DEBUGINFOD.
755 * doc/Makefile.in: Regenerate.
756 * doc/binutils.texi: Add section on using binutils
758 * dwarf.c (debuginfod_fetch_separate_debug_info): New function.
759 Query debuginfod servers for the target debug file.
760 (load_separate_debug_info): Call
761 debuginfod_fetch_separate_debug_info if configured with
763 (load_separate_debug_files): Add file argument to
764 load_separate_debug_info calls.
765 * dwarf.h (get_build_id): Add declaration.
766 * objdump.c (get_build_id): New function. Get build-id of file.
767 * readelf.c (get_build_id): Likewise.
768 * testsuite/binutils-all/debuginfod.exp: New tests.
769 * testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id
772 2020-01-02 Sergey Belyashov <sergey.belyashov@gmail.com>
774 * readelf.c: Add support for new Z*) relocations and machine
777 2020-01-01 Alan Modra <amodra@gmail.com>
779 Update year range in copyright notice of all files.
781 For older changes see ChangeLog-2019
783 Copyright (C) 2020 Free Software Foundation, Inc.
785 Copying and distribution of this file, with or without modification,
786 are permitted in any medium without royalty provided the copyright
787 notice and this notice are preserved.
793 version-control: never