1 2019-07-23 Alan Modra <amodra@gmail.com>
3 * testsuite/binutils-all/objcopy.exp (elf64): Correct object
4 file used to set this variable.
6 2019-07-23 Omar Majid <omajid@redhat.com>
8 * Makefile.am (AUTOMAKE_OPTIONS): Add subdir-objects
9 (GENTESTDLLSPROG): Define.
10 (TEST_PROGS): Add GENTESTDLLSPROG.
11 * Makefile.in: Regenerate.
12 * testsuite/binutils-all/objdump.exp
13 (test_objdump_dotnet_assemblies): New proc.
15 * testsuite/gentestdlls.c: New source file.
17 2019-06-28 Nick Clifton <nickc@redhat.com>
20 * objdump.c (slurp_symtab): Fail with a helpful error message if
21 the symbol table is too large. Skip this check for MMO format
24 2019-06-26 Nick Clifton <nickc@redhat.com>
27 * bucomm.c (bfd_nonfatal): If no bfd error code has been set then
28 indicate this in the output.
29 (bfd_nonfatal_message): Likewise.
31 2019-06-25 Jan Beulich <jbeulich@suse.com>
33 * readelf.c (dump_ctf_indent_lines): Rename local variable
36 2019-06-25 Jan Beulich <jbeulich@suse.com>
38 * objdump.c (dump_ctf_indent_lines): Rename local variable
41 2019-06-14 Alan Modra <amodra@gmail.com>
43 * Makefile.in: Regenerate.
44 * aclocal.m4: Regenerate.
45 * doc/Makefile.in: Regenerate.
47 2019-06-12 Christos Zoulas <christos@zoulas.com>
50 * readelf.c (process_netbsd_elf_note): Add support for
52 (process_note): Add support for PaX notes.
54 2019-06-12 Christos Zoulas <christos@zoulas.com>
57 * readelf.c (get_netbsd_elfcore_note_type): Add support for SH
60 2019-06-12 Christos Zoulas <christos@zoulas.com>
63 * readelf.c (get_netbsd_elfcore_note_type): Add support for NetBSD
66 2019-06-11 Christos Zoulas <christos@zoulas.com>
69 * readelf.c (get_alpha_symbol_other): New function.
70 (get_symbol_other): Use for Alpha symbols.
71 (is_32bit_pcrel_reloc): Add R_VAX_PCREL32.
73 2019-06-11 Christos Zoulas <christos@zoulas.com>
76 * readelf.c (decode_arm_unwind): Ensure that the local variable
77 'addr' is always initialised.
79 2019-06-10 Christos Zoulas <christos@zoulas.com>
82 * strings.c (print_strings): Use %u to print unsigned values in
85 2019-06-10 Christos Zoulas <christos@zoulas.com>
88 * arsup.c (ar_open): Use asprintf in place of xmalloc and
91 2019-06-03 Nick Clifton <nickc@redhat.com>
94 2019-05-29 Nick Clifton <nickc@redhat.com>
96 * configure.ac (LIBCTF): Export. Set to empty for non-ELF based
98 (HAVE_LIBCTF): Define if libctf support is available.
99 * Makefile.am (LIBCTF): Set value to @LIBCTF@.
100 * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
102 * readelf.c: Likewise.
103 * configure: Regenerate.
104 * Makefile.in: Regenerate.
105 * config.in: Regenerate.
107 2019-05-30 Nick Alcock <nick.alcock@oracle.com>
109 * objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
111 * readelf.c (shdr_to_ctf_sect): Likewise.
113 2019-05-30 Nick Clifton <nickc@redhat.com>
116 * readelf.c (process_version_sections): Add 0x prefix to address
117 display. Correct indentation.
119 2019-05-30 Alan Modra <amodra@gmail.com>
121 * testsuite/lib/binutils-common.exp (supports_gnu_unique): Add
122 s12z to targets not supporting this feature.
124 2019-05-30 Alan Modra <amodra@gmail.com>
126 * testsuite/lib/binutils-common.exp (run_dump_test): Support
127 tcl procedures for xfail args.
129 2019-05-29 Nick Clifton <nickc@redhat.com>
131 * README-how-to-make-a-release: Add libctf to list of directories
132 that need updates in their ChangeLogs.
134 2019-05-29 Nick Clifton <nickc@redhat.com>
136 * configure.ac (LIBCTF): Export. Set to empty for non-ELF based
138 (HAVE_LIBCTF): Define if libctf support is available.
139 * Makefile.am (LIBCTF): Set value to @LIBCTF@.
140 * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
142 * readelf.c: Likewise.
143 * configure: Regenerate.
144 * Makefile.in: Regenerate.
145 * config.in: Regenerate.
147 2019-05-28 Nick Alcock <nick.alcock@oracle.com>
149 * MAINTAINERS: Add myself as CTF maintainer.
151 2019-05-28 Nick Alcock <nick.alcock@oracle.com>
153 * objdump.c (ctf-api.h): New include.
154 (dump_ctf_section_info): New variable.
155 (dump_ctf_section_name): Likewise.
156 (usage): Describe new options.
157 (enum option_values): Add OPTION_CTF and OPTION_CTF_PARENT.
158 (main): Use them to add --ctf and --ctf-parent.
159 (read_section_stabs): Add new parameter, entsize_ptr.
160 (find_stabs_section): Adjust accordingly.
162 (dump_ctf_indent_lines): New.
163 (dump_ctf_archive_member): New.
165 (dump_bfd): Call it. Free resources afterwards.
166 * readelf.c (ctf-api.h): New include.
168 (static bfd_boolean do_ctf): Likewise.
169 (dump_ctf_parent_name): Likewise.
170 (dump_ctf_symtab_name): Likewise.
171 (dump_ctf_strtab_name): Likewise.
172 (OPTION_CTF_DUMP): Likewise.
173 (OPTION_CTF_PARENT): Likewise.
174 (OPTION_CTF_SYMBOLS): Likewise.
175 (OPTION_CTF_STRINGS): Likewise.
178 (parse_args): Handle the new options, requesting CTF_DUMP.
179 (process_section_contents): Handle CTF_DUMP.
180 (shdr_to_ctf_sect): New.
181 (dump_ctf_indent_lines): New.
182 (dump_section_as_ctf): New.
183 (main): Free resources.
184 * Makefile.am (LIBCTF): New variable.
185 (objdump_DEPENDENCIES): Use it.
186 (readelf_DEPENDENCIES): Likewise.
187 (objdump_LDADD): Likewise.
188 (readelf_LDADD): Likewise.
189 * aclocal.m4: Regenerated.
190 * Makefile.in: Likewise.
192 * doc/binutils.texi (objdump): Document the new options.
194 * doc/ctf.options.texi: New.
195 * doc/Makefile.in: Regenerated.
196 * NEWS: Mention the new feature.
198 2019-05-27 Alan Modra <amodra@gmail.com>
200 * readelf.c (process_section_groups): Continue processing groups
201 when sh_entsize exceeds group size.
203 2019-05-24 Szabolcs Nagy <szabolcs.nagy@arm.com>
205 * readelf.c (get_aarch64_dynamic_type): Handle DT_AARCH64_VARIANT_PCS.
206 (get_aarch64_symbol_other): New, handles STO_AARCH64_VARIANT_PCS.
207 (get_symbol_other): Call get_aarch64_symbol_other.
209 2019-05-24 Alan Modra <amodra@gmail.com>
211 * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
213 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
215 * MAINTAINERS: Add myself as the maintainer for BPF.
217 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
219 * readelf.c: Include elf/bpf.h.
220 (guess_is_rela): Hanle EM_BPF.
221 (dump_relocations): Likewise.
222 (is_32bit_abs_reloc): Likewise.
223 * testsuite/binutils-all/nm.exp: Add bpf-*-* to the list of
226 2019-05-21 Tamar Christina <tamar.christina@arm.com>
228 * dwarf.c (dwarf_regnames_aarch64): Add SVE registers.
229 * testsuite/binutils-all/aarch64/sve-dwarf-registers.d: New test.
230 * testsuite/binutils-all/aarch64/sve-dwarf-registers.s: New test.
232 2019-05-20 Faraz Shahbazker <fshahbazker@wavecomp.com>
235 * testsuite/binutils-all/readelf.ss-mips: Update reference output.
236 * testsuite/binutils-all/readelf.ss-tmips: Likewise.
238 2019-05-20 Nick Clifton <nickc@redhat.com>
240 * po/ca.po: Updated Catalan translation.
242 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
244 * NEWS: Mention Armv8.1-M Mainline and MVE.
246 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
248 * readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
249 (arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
251 2019-05-14 Jamey Hicks <jamey.hicks@gmail.com>
254 * objcopy.c: Add new option --verilog-data-width. Use it to set
255 the value of VerilogDataWidth.
256 * doc/binutils.texi: Document the new option.
257 * testsuite/binutils-all/objcopy.exp: Run tests of new option.
258 * testsuite/binutils-all/verilog-1.hex: New file.
259 * testsuite/binutils-all/verilog-2.hex: New file.
260 * testsuite/binutils-all/verilog-4.hex: New file.
261 * testsuite/binutils-all/verilog-8.hex: New file.
262 * NEWS: Mention the new feature.
264 2019-05-10 Alan Modra <amodra@gmail.com>
266 * testsuite/binutils-all/objdump.exp (test_objdump_disas_limited),
267 (test_objdump_content_limited): Add text arg, use in place of .text.
268 (bintest_signed.o): Call get_standard_section_names for name of
271 2019-05-08 Faraz Shahbazker <fshahbazker@wavecomp.com>
273 * objdump.c (sign_extend_address): New function.
274 (dump_bfd): Sign-extend user-specified start/stop addresses
275 for targets that need it.
276 * testsuite/binutils-all/objdump.exp: Add tests for objdump
277 with start and stop addresses in higher address ranges.
279 2019-05-01 Matthew Malcomson <matthew.malcomson@arm.com>
281 * testsuite/binutils-all/objdump.exp: Correct executable
283 * testsuite/binutils-all/compress.exp: Likewise.
285 2019-05-01 Nick Clifton <nickc@redhat.com>
288 * nm.c: (print_format): New variable.
289 (value_format_32bit, value_format_64bit): Delete.
290 (set_print_radix): Remove code to alter value_format strings.
291 (set_output_format): Record chosen format in print_format.
292 (get_print_format): New function - constructs a printf formatting
293 string according to the requirements of size, radix, and output
295 (print_value): Use get_print_format.
296 * testsuite/binutils-all/nm.exp: Add tests of "nm --format=posix"
299 2019-04-30 Alan Modra <amodra@gmail.com>
301 * wrstabs.c (stab_start_class_type): Add assert to work around
304 2019-04-24 Nick Clifton <nickc@redhat.com>
306 * objcopy.c (strip_main): Do not enable note merging by default if
307 just stripping debug or dwo information.
308 * doc/binutils.texi (strip): Update documentation.
310 2019-04-23 Nick Clifton <nickc@redhat.com>
312 * README-how-to-make-a-release: Add note to update the symbolic
313 link from "docs" to "docs-2.x" on the sourceware website.
315 2019-04-16 Alan Modra <amodra@gmail.com>
317 * testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
318 * testsuite/binutils-all/copy-3.d: Likewise.
320 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
322 * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
324 2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
326 * readelf.c (decode_x86_isa): Handle
327 GNU_PROPERTY_X86_ISA_1_AVX512_BF16.
328 * testsuite/binutils-all/i386/pr21231b.d: Updated.
329 * testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
331 2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
333 * testsuite/binutils-all/nm.exp: Count i386-moss as ELF.
335 2019-03-26 Tamar Christina <tamar.christina@arm.com>
337 * testsuite/binutils-all/aarch64/in-order-all.d: Update.
338 * testsuite/binutils-all/aarch64/in-order.d: Likewise.
339 * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
340 * testsuite/binutils-all/aarch64/out-of-order.d: Likewise.
341 * testsuite/binutils-all/aarch64/out-of-order.s: Likewise.
342 * testsuite/binutils-all/arm/in-order-all.d: Likewise.
343 * testsuite/binutils-all/arm/in-order.d: Likewise.
344 * testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
345 * testsuite/binutils-all/arm/out-of-order.d: Likewise.
346 * testsuite/binutils-all/arm/out-of-order.s: Likewise.
348 2019-03-26 Nick Clifton <nickc@redhat.com>
350 * MAINTAINERS: Take over Dave Brolley's maintainerships for FR30,
353 2019-03-26 Alan Modra <amodra@gmail.com>
355 * objdump.c (dump_relocs_in_section): Warning fix.
357 2019-03-25 Tamar Christina <tamar.christina@arm.com>
359 * testsuite/binutils-all/arm/in-order-all.d: New test.
360 * testsuite/binutils-all/arm/in-order.d: New test.
361 * testsuite/binutils-all/arm/objdump.exp: Support .d tests.
362 * testsuite/binutils-all/arm/out-of-order-all.d: New test.
363 * testsuite/binutils-all/arm/out-of-order.T: New test.
364 * testsuite/binutils-all/arm/out-of-order.d: New test.
365 * testsuite/binutils-all/arm/out-of-order.s: New test.
368 2019-03-25 Tamar Christina <tamar.christina@arm.com>
370 * testsuite/binutils-all/aarch64/in-order-all.d: New test.
371 * testsuite/binutils-all/aarch64/out-of-order-all.d: New test.
372 * testsuite/binutils-all/aarch64/out-of-order.d:
374 2019-03-25 Tamar Christina <tamar.christina@arm.com>
376 * testsuite/binutils-all/aarch64/in-order.d: New test.
377 * testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as
380 2019-03-25 Tamar Christina <tamar.christina@arm.com>
382 * objdump.c (disassemble_bytes): Pass stop_offset.
383 * testsuite/binutils-all/aarch64/out-of-order.T: New test.
384 * testsuite/binutils-all/aarch64/out-of-order.d: New test.
385 * testsuite/binutils-all/aarch64/out-of-order.s: New test.
387 2019-03-19 Nick Clifton <nickc@redhat.com>
390 * objdump.c (load_specific_debug_section): Check that the amount
391 of memory to be allocated matches the size of the section.
393 2019-03-13 Sudakshina Das <sudi.das@arm.com>
395 * readelf.c (get_aarch64_dynamic_type): Add case for
397 (dynamic_section_aarch64_val): Likewise.
399 2019-03-13 Sudakshina Das <sudi.das@arm.com>
400 Szabolcs Nagy <szabolcs.nagy@arm.com>
402 * readelf.c (get_aarch64_dynamic_type): New.
403 (get_dynamic_type): Use above for EM_AARCH64.
404 (dynamic_section_aarch64_val): New.
405 (process_dynamic_section): Use above for EM_AARCH64.
407 2019-03-13 Sudakshina Das <sudi.das@arm.com>
409 * readelf.c (decode_aarch64_feature_1_and): New.
410 (print_gnu_property_note): Add case for AArch64 gnu notes.
412 2019-03-12 Alan Modra <amodra@gmail.com>
414 * objdump.c (load_specific_debug_section): Don't compare section
415 size against file size.
416 (dump_relocs_in_section): Don't compare reloc size against file size.
417 Print "failed to read relocs" on bfd_get_reloc_upper_bound error.
419 2019-03-05 Nick Clifton <nickc@redhat.com>
422 * doc/binutils.texi (ar cmdline): Fix spelling mistake.
424 2019-03-05 Nick Clifton <nickc@redhat.com>
426 * po/sv.po: Updated Swedish translation.
428 2019-03-05 Matthew Malcomson <matthew.malcomson@arm.com>
431 * testsuite/lib/binutils-common.exp (run_dump_test): Replace a use
432 of "lmap" with a "foreach" loop.
434 2019-03-04 Nick Clifton <nickc@redhat.com>
437 * objcopy.c (copy_archive): Do not copy thin archives.
439 2019-02-27 Matthew Malcomson <matthew.malcomson@arm.com>
441 * testsuite/lib/binutils-common.exp: Allow multiple "as" lines.
443 2019-02-25 Nick Clifton <nickc@redhat.com>
445 * objdump.c (sym_ok): New function.
446 (find_symbol_for_address): Use new function.
447 (disassemble_section): Compare sections by name, not pointer.
448 (dump_dwarf): Move code to initialise byte_get pointer and iterate
449 over separate debug files from here to ...
450 (dump_bfd): ... here. Add parameter indicating that a separate
451 debug info file is being dumped. For main file, pull in the
452 symbol tables from all separate debug info files.
453 (display_object): Update call to dump_bfd.
454 * doc/binutils.texi: Document extened behaviour of the
455 --dwarf=follow-links option.
456 * NEWS: Mention this new feature.
457 * testsuite/binutils-all/objdump.WK2: Update expected output.
458 * testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add
459 options and dump file parameters.
461 * testsuite/binutils-all/objdump.WK3: New file.
462 * testsuite/binutils-all/readelf.exp: Change expected output for
464 * testsuite/binutils-all/readelf.wKis: New file.
466 2019-02-22 Nick Clifton <nickc@redhat.com>
469 * dwarf.h (struct separate_info): New structure for containing
470 information on separate debug info files.
471 * dwarf.c (struct dwo_info): New structure for containing dwo
473 (first_dwo_info): Chain of dwo_info structures.
474 (first_separate_file): Chain of separate_info structures.
475 (separate_debug_file, separate_debug_filename): Delete.
476 (fetch_alt_indirect_string): Scan all separate debug info files
477 for the requested string.
478 (add_dwo_info): New function.
479 (add_dwo_name): New function.
480 (add_dwo_dir): New function.
481 (add_dwo_id: New function.
482 (free_dwo_info): New function.
483 (read_and_display_attr_value): Store DWO data using the new
485 (load_debug_section_with_follow): If necessary, scan the list of
486 separate debug info files for the requested section.
487 (add_separate_debug_file): New function.
488 (load_separate_debug_info): Call add_separate_debug_file to store
489 the information on the newly loaded file.
490 (load_dwo_file): Likewise.
491 (load_separate_debif_file): Rename to load_separate_debug_files.
492 Change return type to boolean. If following links then attempt to
493 load all separate debug info files, not just the first one.
494 (free_debug_memory): Release memory in dwo_info and separate_info
496 * objdump.c (dump_dwarf): Iterate over all loaded debg info files.
497 * readelf.c (process_object): Likewise.
498 * doc/debug.options.texi: Update descriptions of links and
499 follow-links options.
500 * testsuite/binutils-all/objdump.WK2: Update expected output.
501 * testsuite/binutils-all/readelf.k2: Likewise.
502 * NEWS: Announce the new feature.
504 2019-02-21 Nick Clifton <nickc@redhat.com>
507 * unwind-ia64.c: Include sysdep.h.
508 (unw_decode_x1): Check current pointer against end pointer before
510 (unw_decode_x2): Likewise.
511 (unw_decode_x3): Likewise.
512 (unw_decode_x4): Likewise.
513 (unw_decode_r2): Likewise.
514 (unw_decode_p2_p5): Likewise.
515 (unw_decode_p7_p10): Likewise.
516 (unw_decode): Likewise.
518 2019-02-20 Nick Clifton <nickc@redhat.com>
521 * readelf.c (print_stapsdt_note): Harden against corrupt notes.
524 * unwind-ia64.c (unw_decode_uleb128): Add end parameter, use it to
525 prevent walking off the end of the buffer.
526 (unw_decode_x1): Add end paramter, pass it to unw_decode_uleb128.
527 (unw_decode_x2): Likewise.
528 (unw_decode_x3): Likewise.
529 (unw_decode_x4): Likewise.
530 (unw_decode_r2): Pass the end parameter to unw_decode_uleb128.
531 (unw_decode_r3): Likewise.
532 (unw_decode_p7_p10): Likewise.
533 (unw_decode_b2): Likewise.
534 (unw_decode_b3_x4): Likewise.
537 * readelf.c (process_mips_specific): Check for an options section
538 that is too small to even contain a single option.
541 * readelf.c (print_ia64_vms_note): Harden against corrupt notes.
543 2019-02-20 Alan Modra <amodra@gmail.com>
547 * readelf.c (get_data): Avoid possibility of overflow when
548 checking for a read that may extend past end of file.
549 (process_program_headers): Likewise.
551 2019-02-20 Alan Modra <amodra@gmail.com>
554 * objdump.c (dump_bfd_private_header): Print warning if
555 bfd_print_private_bfd_data returns false.
557 2019-02-12 Nick Clifton <nickc@redhat.com>
560 * README-how-to-make-a-release: Use git clean to delete spurious
561 files from the local source repository.
563 2019-02-08 Andrew Burgess <andrew.burgess@embecosm.com>
565 * size.c (berkeley_format): Delete.
566 (enum output_format): New enum.
567 (selected_output_format): New variable.
568 (usage): Update to mention GNU format.
569 (main): Update to extract options, and select format as needed.
570 Handle GNU format where needed.
571 (berkeley_sum): Renamed to...
572 (berkeley_or_gnu_sum): ...this, and updated to handle both formats.
573 (berkeley_format): Renamed to...
574 (berkeley_or_gnu_format): ...this, and updated to handle both
576 (print_sizes): Handle GNU format.
577 * doc/binutils.texi (size): Document new GNU format.
578 * testsuite/binutils-all/size.exp: Add test of extended
580 * NEWS: Mention new functionality.
582 2019-02-08 Andrew Burgess <andrew.burgess@embecosm.com>
584 * doc/binutils.texi (size): Update example output for Berkeley
587 2019-02-07 Nick Clifton <nickc@redhat.com>
589 * README-how-to-make-a-release: Add a note about updating the
590 obsolete targets in the bfd/config.bfd file.
592 2019-02-04 Nick Clifton <nickc@redhat.com>
594 * README-how-to-make-a-release: Add more notes on making a release.
596 2019-01-25 Nick Clifton <nickc@redhat.com>
599 * readelf.c (process_notes_at): Prevent an illegal memory access
600 when the note's namesize is zero.
601 (decode_tic6x_unwind_bytecode): Add code to handle the case where
602 no registers are specified in a frame pop instruction.
604 2019-01-25 Nick Clifton <nickc@redhat.com>
606 * po/bg.po: Updated Bulgarian translation.
608 2019-01-23 Nick Clifton <nickc@redhat.com>
610 * po/fr.po: Updated French translation.
611 * po/pt.po: Updated Portuguese translation.
613 2019-01-21 Nick Clifton <nickc@redhat.com>
615 * po/uk.po: Updated Ukranian translation.
617 2019-01-19 Nick Clifton <nickc@redhat.com>
619 * configure: Regenerate.
620 * binutils/po/binutils.pot.
622 * README-how-to-make-a-release: Update description on how to make
625 2018-06-24 Nick Clifton <nickc@redhat.com>
629 2019-01-17 Nick Clifton <nickc@redhat.com>
631 * objdump.c (disassemble_section): When disassembling from a
632 symbol only stop at the next symbol if the original symbol was not
633 a function symbol. Otherwise continue disassembling until a new
635 * testsuite/binutils-all/objdump.exp: Add tests of extended
637 * testsuite/binutils-all/disasm.s: New test source file.
639 2019-01-16 Kito Cheng <kito@andestech.com>
640 Nelson Chu <nelson@andestech.com>
642 * readelf.c (get_riscv_section_type_name): New function.
643 (get_section_type_name): Add handler for RISC-V.
644 (riscv_attr_tag_t): Declare.
645 (riscv_attr_tag): New.
646 (display_riscv_attribute): New function.
647 (process_attributes): Add handler for RISC-V.
648 * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute
651 2019-01-10 Nick Clifton <nickc@redhat.com>
654 * objdump.c (sanitize_string): New function. Removes control
655 characters from symbol names.
656 (dump_section_header): Use new function.
657 (objdump_print_symname): Likewise.
658 (objdump_print_addr_with_sym): Likewise.
659 (show_line): Likewise.
660 (disassemble_bytes): Likewise.
661 (disassemble_section): Likewise.
662 (load_specific_debug_section): Likewise.
663 (read_section_stabs): Likewise.
664 (print_section_stabs): Likewise.
665 (dump_section): Likewise.
666 (dump_reloc_set): Likewise.
667 (dump_relocs_in_section): Likewise.
668 (dump_bfd): Likewise.
669 (display_any_bfd): Likewise.
671 2019-01-09 Nick Clifton <nickc@redhat.com>
674 * readelf.c (process_archive): Use arch.file_name in error
675 messages until the qualified name is available.
677 2019-01-09 Andrew Paprocki <andrew@ishiboo.com>
679 * configure: Regenerate.
681 2019-01-09 Alan Modra <amodra@gmail.com>
683 * testsuite/binutils-all/cxxfilt.exp: Pass --no-strip-underscores
684 unconditionally to tests needing the option rather than via a
687 2019-01-08 Nick Clifton <nickc@redhat.com>
690 * cxxfilt.c (hp_symbol_characters): Delete.
691 (main): Remove depcreated demangling styles.
692 * stabs.c (parse_stab_argtypes): Remove support for old gnu v2
694 * testsuite/binutils-all/cxxfilt.exp: Use the
695 --no-strip-underscore option for targets that do prefix their
696 symbols with underscores.
697 Update tests to eliminate those that use gnu v2 encoding.
699 2019-01-08 Tamar Christina <tamar.christina@arm.com>
702 * testsuite/binutils-all/copy-6.d: New test.
703 * testsuite/binutils-all/objcopy.exp: Use it.
705 2019-01-08 Alan Modra <amodra@gmail.com>
707 * testsuite/lib/binutils-common.exp (run_dump_test): Don't prepend
708 $srcdir/$subdir to source file name if it starts with "./".
710 2019-01-05 Yoshinori Sato <ysato@users.sourceforge.jp>
712 * readelf.c (get_machine_flags): Add RXv3 output.
714 2019-01-04 Nick Clifton <nickc@redhat.com>
717 * objdump.c (load_specific_debug_section): Check for integer
718 overflow before attempting to allocate contents.
720 2019-01-04 Nick Clifton <nickc@redhat.com>
723 * objcopy.c (copy_object): Free dhandle after writing out the
725 * objdump.c (dump_bfd): Free dhandle after printing out the debug
729 2019-01-01 Alan Modra <amodra@gmail.com>
731 Update year range in copyright notice of all files.
733 For older changes see ChangeLog-2018
735 Copyright (C) 2019 Free Software Foundation, Inc.
737 Copying and distribution of this file, with or without modification,
738 are permitted in any medium without royalty provided the copyright
739 notice and this notice are preserved.
745 version-control: never