binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2 #
   3 #   Copyright 2012 Free Software Foundation
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 3 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; see the file COPYING3.  If not see
  17 # <http://www.gnu.org/licenses/>.
  18 #
  19
  20 AUTOMAKE_OPTIONS = dejagnu no-dist foreign
  21 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
  22
  23 SUBDIRS = doc po
  24
  25 tooldir = $(exec_prefix)/$(target_alias)
  26
  27 ## These aren't set by automake, because they appear in
  28 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  29 ## thus is not seen by automake.
  30 CC_FOR_BUILD = @CC_FOR_BUILD@
  31 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  32
  33 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  34 YFLAGS = -d
  35 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  36
  37 # Automake 1.10+ disables lex and yacc output file regeneration if
  38 # maintainer mode is disabled.  Avoid this.
  39 am__skiplex =
  40 am__skipyacc =
  41
  42 WARN_CFLAGS = @WARN_CFLAGS@
  43 NO_WERROR = @NO_WERROR@
  44 AM_CFLAGS = $(WARN_CFLAGS)
  45 LIBICONV = @LIBICONV@
  46
  47 # these two are almost the same program
  48 AR_PROG=ar
  49 RANLIB_PROG=ranlib
  50
  51 # objcopy and strip should be the same program
  52 OBJCOPY_PROG=objcopy
  53 STRIP_PROG=strip-new
  54
  55 STRINGS_PROG=strings
  56
  57 READELF_PROG=readelf
  58
  59 ELFEDIT_PROG=elfedit
  60
  61 # These should all be the same program too.
  62 SIZE_PROG=size
  63 NM_PROG=nm-new
  64 OBJDUMP_PROG=objdump
  65
  66 # This is the demangler, as a standalone program.
  67 # Note: This one is used as the installed name too, unlike the above.
  68 DEMANGLER_PROG=cxxfilt
  69
  70 ADDR2LINE_PROG=addr2line
  71
  72 NLMCONV_PROG=nlmconv
  73 DLLTOOL_PROG=dlltool
  74 WINDRES_PROG=windres
  75 WINDMC_PROG=windmc
  76 DLLWRAP_PROG=dllwrap
  77
  78 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  79
  80 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
  81
  82 bin_SCRIPTS = @BUILD_INSTALL_MISC@
  83 EXTRA_SCRIPTS = embedspu
  84
  85 ## Test programs.
  86 BFDTEST1_PROG = bfdtest1
  87 BFDTEST2_PROG = bfdtest2
  88
  89 TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG)
  90
  91 ## We need a special rule to install the programs which are built with
  92 ## -new, and to rename cxxfilt to c++filt.
  93 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
  94 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
  95
  96 EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
  97
  98 # Stuff that goes in tooldir/ if appropriate.
  99 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy
 100
 101 BASEDIR = $(srcdir)/..
 102 BFDDIR = $(BASEDIR)/bfd
 103 INCDIR  = $(BASEDIR)/include
 104
 105 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
 106          @HDEFINES@ \
 107          @INCINTL@ \
 108          -DLOCALEDIR="\"$(datadir)/locale\"" \
 109          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
 110
 111 HFILES = \
 112         arsup.h binemul.h bucomm.h budbg.h \
 113         coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \
 114         objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
 115         windmc.h
 116
 117 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
 118 BUILT_SOURCES = $(GENERATED_HFILES)
 119
 120 CFILES = \
 121         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
 122         coffdump.c coffgrok.c cxxfilt.c \
 123         dwarf.c debug.c dlltool.c dllwrap.c \
 124         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
 125         ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 126         nlmconv.c nm.c not-ranlib.c not-strip.c \
 127         objcopy.c objdump.c prdbg.c \
 128         od-xcoff.c od-macho.c \
 129         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 130         resbin.c rescoff.c resrc.c resres.c \
 131         size.c srconv.c stabs.c strings.c sysdump.c \
 132         syslex_wrap.c unwind-ia64.c elfedit.c version.c \
 133         windres.c winduni.c wrstabs.c \
 134         windmc.c mclex.c
 135
 136 GENERATED_CFILES = \
 137         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 138         defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
 139
 140 DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
 141 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 142
 143 # Extra object files for objdump
 144 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 145
 146 # Code shared by all the binutils.
 147 BULIBS = bucomm.c version.c filemode.c
 148
 149 # Code shared by the ELF related programs.
 150 ELFLIBS = elfcomm.c
 151
 152 BFDLIB = ../bfd/libbfd.la
 153
 154 OPCODES = ../opcodes/libopcodes.la
 155
 156 LIBIBERTY = ../libiberty/libiberty.a
 157
 158 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 159 po/POTFILES.in: @MAINT@ Makefile
 160         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 161           && mv tmp $(srcdir)/po/POTFILES.in
 162
 163 EXPECT = expect
 164 RUNTEST = runtest
 165
 166 CC_FOR_TARGET = ` \
 167   if [ -f $$r/../gcc/xgcc ] ; then \
 168     if [ -f $$r/../newlib/Makefile ] ; then \
 169       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 170     else \
 171       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 172     fi; \
 173   else \
 174     if [ "@host@" = "@target@" ] ; then \
 175       echo $(CC); \
 176     else \
 177       echo gcc | sed '$(transform)'; \
 178     fi; \
 179   fi`
 180
 181 check-DEJAGNU: site.exp
 182         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 183         r=`pwd`; export r; \
 184         LC_ALL=C; export LC_ALL; \
 185         EXPECT=$(EXPECT); export EXPECT; \
 186         runtest=$(RUNTEST); \
 187         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 188           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 189                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 190                         $(RUNTESTFLAGS); \
 191         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 192         fi
 193
 194 installcheck-local:
 195         /bin/sh $(srcdir)/sanity.sh $(bindir)
 196
 197 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 198 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 199 # non-empty until configure time.  Ugh!
 200 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 201 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES)
 202 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 203 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 204 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 205 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 206 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 207 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 208 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 209 nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 210 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 211 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 212 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 213 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 214 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 215 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 216 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 217 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 218 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 219 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 220 bfdtest1_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 221 bfdtest2_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 222
 223 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 224
 225 size_SOURCES = size.c $(BULIBS)
 226
 227 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 228
 229 strings_SOURCES = strings.c $(BULIBS)
 230
 231 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
 232 readelf_LDADD   = $(LIBINTL) $(LIBIBERTY)
 233
 234 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 235 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 236
 237 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 238
 239 nm_new_SOURCES = nm.c $(BULIBS)
 240
 241 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 242 EXTRA_objdump_SOURCES = od-xcoff.c
 243 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 244
 245 objdump.@OBJEXT@:objdump.c
 246 if am__fastdepCC
 247         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 248         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 249 else
 250 if AMDEP
 251         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 252         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 253 endif
 254         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 255 endif
 256
 257 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 258
 259 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 260         emul_$(EMULATION).c $(BULIBS)
 261 EXTRA_ar_SOURCES = $(CFILES)
 262 ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 263
 264 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 265         binemul.c emul_$(EMULATION).c $(BULIBS)
 266 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 267
 268 addr2line_SOURCES = addr2line.c $(BULIBS)
 269
 270 # The following is commented out for the conversion to automake.
 271 # This rule creates a single binary that switches between ar and ranlib
 272 # by looking at argv[0].  Use this kludge to save some disk space.
 273 # However, you have to install things by hand.
 274 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 275 # Alternatively, you can install ranlib.sh as ranlib.
 276 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 277 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 278 #       -rm -f $(RANLIB_PROG)
 279 #       -ln $(AR_PROG) $(RANLIB_PROG)
 280 #
 281 # objcopy and strip in one binary that uses argv[0] to decide its action.
 282 #
 283 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 284 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 285 #       -rm -f $(STRIP_PROG)
 286 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 287
 288 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 289         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 290         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 291         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 292
 293 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 294         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 295
 296 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 297         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 298
 299 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
 300         $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
 301
 302 sysinfo.@OBJEXT@: sysinfo.c
 303         if [ -r sysinfo.c ]; then \
 304           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 305         else \
 306           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 307         fi
 308
 309 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 310         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 311
 312 embedspu: embedspu.sh Makefile
 313         awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
 314         chmod a+x $@
 315
 316 # We need these for parallel make.
 317 sysinfo.h: sysinfo.c
 318
 319 # Disable -Werror, if it has been enabled, since old versions of bison/
 320 # yacc will produce working code which contain compile time warnings.
 321 arparse.@OBJEXT@: arparse.c
 322 if am__fastdepCC
 323         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 324         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 325 else
 326 if AMDEP
 327         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 328         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 329 endif
 330         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 331 endif
 332
 333 arlex.@OBJEXT@: arlex.c
 334 if am__fastdepCC
 335         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 336         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 337 else
 338 if AMDEP
 339         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 340         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 341 endif
 342         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 343 endif
 344
 345 sysroff.@OBJEXT@: sysroff.c
 346 if am__fastdepCC
 347         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 348         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 349 else
 350 if AMDEP
 351         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 352         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 353 endif
 354         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 355 endif
 356
 357 defparse.@OBJEXT@: defparse.c
 358 if am__fastdepCC
 359         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 360         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 361 else
 362 if AMDEP
 363         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 364         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 365 endif
 366         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 367 endif
 368
 369 deflex.@OBJEXT@: deflex.c
 370 if am__fastdepCC
 371         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 372         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 373 else
 374 if AMDEP
 375         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 376         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 377 endif
 378         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 379 endif
 380
 381 nlmheader.@OBJEXT@: nlmheader.c
 382 if am__fastdepCC
 383         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 384         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 385 else
 386 if AMDEP
 387         source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@
 388         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 389 endif
 390         $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 391 endif
 392
 393 rcparse.@OBJEXT@: rcparse.c
 394 if am__fastdepCC
 395         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 396         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 397 else
 398 if AMDEP
 399         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 400         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 401 endif
 402         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 403 endif
 404
 405 mcparse.@OBJEXT@: mcparse.c
 406 if am__fastdepCC
 407         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 408         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 409 else
 410 if AMDEP
 411         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 412         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 413 endif
 414         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 415 endif
 416
 417 rclex.@OBJEXT@: rclex.c
 418 if am__fastdepCC
 419         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 420         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 421 else
 422 if AMDEP
 423         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 424         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 425 endif
 426         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 427 endif
 428
 429 mclex.@OBJEXT@: mclex.c
 430 if am__fastdepCC
 431         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 432         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 433 else
 434 if AMDEP
 435         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 436         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 437 endif
 438         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 439 endif
 440
 441 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 442 srconv.@OBJEXT@: sysroff.c
 443
 444 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 445 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 446
 447 dlltool.@OBJEXT@:
 448 if am__fastdepCC
 449         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 450         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 451 else
 452 if AMDEP
 453         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 454         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 455 endif
 456         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 457 endif
 458
 459 rescoff.@OBJEXT@:
 460 if am__fastdepCC
 461         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 462         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 463 else
 464 if AMDEP
 465         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 466         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 467 endif
 468         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 469 endif
 470
 471 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 472
 473 sysdump_SOURCES = sysdump.c $(BULIBS)
 474 sysdump.@OBJEXT@: sysroff.c
 475
 476 # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
 477 # scripts, since they are only included conditionally.
 478 nlmconv.@OBJEXT@: nlmconv.c
 479 if am__fastdepCC
 480         ldname=`echo ld | sed '$(transform)'`; \
 481         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \
 482           -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 483         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 484 else
 485 if AMDEP
 486         source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@
 487         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 488 endif
 489         ldname=`echo ld | sed '$(transform)'`; \
 490         $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 491 endif
 492
 493 nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
 494
 495 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 496         winduni.c resres.c $(BULIBS)
 497 windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 498
 499 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 500         winduni.c $(BULIBS)
 501 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 502
 503 dllwrap_SOURCES = dllwrap.c version.c
 504 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 505
 506
 507 EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
 508         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 509         mcparse.h mcparse.c embedspu.sh
 510
 511 diststuff: $(EXTRA_DIST) info
 512 all: info
 513
 514 # We extract version from bfd/configure.in, make sure to rerun configure
 515 # when BFD's version changes.
 516 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
 517
 518 DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu
 519
 520 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 521   binutils.log binutils.sum abcdefgh*
 522 mostlyclean-local:
 523         -rm -rf tmpdir
 524
 525 .PHONY: install-exec-local
 526
 527 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 528         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 529           if test -f $$p$(EXEEXT); then \
 530             echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 531             $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 532           else :; fi; \
 533         done
 534         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 535         for i in $(TOOL_PROGS); do \
 536           if [ -f $$i$(EXEEXT) ]; then \
 537             j=`echo $$i | sed -e 's/-new//'`; \
 538             k=`echo $$j | sed '$(transform)'`; \
 539             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 540               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 541               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 542                 || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 543             fi; \
 544           else true; \
 545           fi; \
 546         done