debian/control.in

   1 define(MULTIARCH_HEADERS,ifdef(`DO_MULTIARCH',
   2 Multi-Arch: same
   3 Pre-Depends: ${misc:Pre-Depends},REMOVE_ME))dnl
   4 define(UTIL_LINUX_NG_DEFINES,
   5 ifdef(`UTIL_LINUX_NG', ``libblkid-dev (>= 2.16), uuid-dev (>= 2.16),''))dnl
   6 define(DIETLIBC_DEFINES,
   7 ifdef(`DIETLIBC', ``dietlibc-dev (>> 0.30) [alpha amd64 arm hppa i386 ia64 powerpc ppc64 s390 sparc],''))dnl
   8 Source: e2fsprogs
   9 Section: admin
  10 Priority: required
  11 Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
  12 Build-Depends: texi2html (>= 1.76), gettext, texinfo, pkg-config, DIETLIBC_DEFINES gcc-multilib [mips mipsel], debhelper (>= 7.0), UTIL_LINUX_NG_DEFINES m4
  13 Standards-Version: 3.9.4
  14 Homepage: http://e2fsprogs.sourceforge.net
  15
  16 ifdef(`E2FSCK_STATIC',``
  17 Package: e2fsck-static
  18 Priority: optional
  19 Depends: ${shlibs:Depends}, ${misc:Depends}
  20 Recommends: sash | bash-static | zsh-static | busybox-static | zsh30-static
  21 Architecture: any
  22 Description: statically-linked version of the ext2/ext3/ext4 filesystem checker
  23  This may be of some help to you if your filesystem gets corrupted enough
  24  to break the shared libraries used by the dynamically linked checker.
  25  .
  26  This binary takes much more space than its dynamic counterpart located
  27  in e2fsprogs, though.
  28  .
  29  You may want to install a statically-linked shell as well, to be able
  30  to run this program if something like your C library gets corrupted.
  31 '')dnl
  32
  33 Package: libcomerr2
  34 Section: libs
  35 Provides: libcomerr-kth-compat
  36 Depends: ${shlibs:Depends}, ${misc:Depends}
  37 Replaces: e2fsprogs (<< 1.34-1)
  38 Architecture: any
  39 MULTIARCH_HEADERS
  40 Description: common error description library
  41  libcomerr is an attempt to present a common error-handling mechanism to
  42  manipulate the most common form of error code in a fashion that does not
  43  have the problems identified with mechanisms commonly in use.
  44
  45 Package: comerr-dev
  46 Section: libdevel
  47 Priority: extra
  48 Depends: libc6-dev | libc-dev, libcomerr2 (= ${mainBinary}), ${misc:Depends}
  49 Suggests: doc-base
  50 Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3)
  51 Architecture: any
  52 Description: common error description library - headers and static libraries
  53  libcom_err is an attempt to present a common error-handling mechanism to
  54  manipulate the most common form of error code in a fashion that does not
  55  have the problems identified with mechanisms commonly in use.
  56  .
  57  This package contains the development environment for the com_err library.
  58
  59 Package: libss2
  60 Section: libs
  61 Depends: libcomerr2, ${shlibs:Depends}, ${misc:Depends}
  62 Replaces: e2fsprogs (<< 1.34-1)
  63 Architecture: any
  64 MULTIARCH_HEADERS
  65 Description: command-line interface parsing library
  66  libss provides a simple command-line interface parser which will
  67  accept input from the user, parse the command into an argv argument
  68  vector, and then dispatch it to a handler function.
  69  .
  70  It was originally inspired by the Multics SubSystem library.
  71
  72 Package: ss-dev
  73 Section: libdevel
  74 Priority: extra
  75 Depends: libc6-dev | libc-dev, libss2 (= ${mainBinary}), comerr-dev, ${misc:Depends}
  76 Architecture: any
  77 Description: command-line interface parsing library - headers and static libraries
  78  This package includes a tool that parses a command table to generate
  79  a simple command-line interface parser, the include files needed to
  80  compile and use it, and the static libs.
  81  .
  82  It was originally inspired by the Multics SubSystem library.
  83  .
  84  This package contains the development environment for the ss library.
  85 ifdef(`UTIL_LINUX_NG',,``
  86 Package: libuuid1
  87 Section: libs
  88 Depends: passwd, ${shlibs:Depends}, ${misc:Depends}
  89 Recommends: uuid-runtime
  90 Replaces: e2fsprogs (<< 1.34-1)
  91 Architecture: any
  92 MULTIARCH_HEADERS
  93 Description: Universally Unique ID library
  94  The libuuid library generates and parses 128-bit universally unique
  95  ids (UUIDs).  A UUID is an identifier that is unique across both
  96  space and time, with respect to the space of all UUIDs.  A UUID can
  97  be used for multiple purposes, from tagging objects with an extremely
  98  short lifetime, to reliably identifying very persistent objects
  99  across a network.
 100  .
 101  See RFC 4122 for more information.
 102
 103 Package: uuid-runtime
 104 Section: libs
 105 Priority: optional
 106 Depends: passwd, libuuid1 (>> 1.40.3-1), ${shlibs:Depends}, ${misc:Depends}
 107 Replaces: e2fsprogs (<= 1.40.3-1ubuntu1)
 108 Architecture: any
 109 Description: runtime components for the Universally Unique ID library
 110  The libuuid library generates and parses 128-bit universally unique
 111  ids (UUIDs).  A UUID is an identifier that is unique across both
 112  space and time, with respect to the space of all UUIDs.  A UUID can
 113  be used for multiple purposes, from tagging objects with an extremely
 114  short lifetime, to reliably identifying very persistent objects
 115  across a network.
 116  .
 117  See RFC 4122 for more information.
 118  .
 119  This package contains the uuidgen program and the uuidd daemon.
 120  .
 121  The uuidd daemon is used to generate UUIDs, especially time-based
 122  UUID’s, in a secure and guaranteed-unique fashion, even in the face
 123  of large numbers of threads trying to grab UUID’s running on
 124  different CPU’s. It is used by libuuid as well as the uuidgen
 125  program.
 126
 127 Package: libuuid1-udeb
 128 XC-Package-Type: udeb
 129 Section: debian-installer
 130 Priority: optional
 131 Depends: ${shlibs:Depends}
 132 Architecture: any
 133 Description: stripped down universally unique id library, for debian-installer
 134  libuuid generates and parses 128-bit universally unique ids (UUIDs).
 135  See RFC 4122 for more information.
 136  .
 137  This is a minimal package for debian-installer.
 138
 139 Package: uuid-dev
 140 Section: libdevel
 141 Priority: extra
 142 Depends: libc6-dev | libc-dev, libuuid1 (= ${mainBinary}), ${misc:Depends}
 143 Replaces: e2fslibs-dev (<< 1.15)
 144 Architecture: any
 145 Description: universally unique id library - headers and static libraries
 146  libuuid generates and parses 128-bit universally unique ids (UUIDs).
 147  See RFC 4122 for more information.
 148  .
 149  This package contains the development environment for the uuid library.
 150
 151 Package: libblkid1
 152 Section: libs
 153 Depends: ${shlibs:Depends}, ${misc:Depends}
 154 Architecture: any
 155 Description: block device id library
 156  The blkid library which allows system programs like fsck and
 157  mount to quickly and easily find block devices by filesystem UUID and
 158  LABEL.  This allows system administrators to avoid specifying
 159  filesystems by hard-coded device names, but via a logical naming
 160  system instead.
 161
 162 Package: libblkid1-udeb
 163 XC-Package-Type: udeb
 164 Section: debian-installer
 165 Priority: optional
 166 Depends: ${shlibs:Depends}, ${misc:Depends}
 167 Architecture: any
 168 Description: stripped down block device id library, for debian-installer
 169  The blkid library which allows system programs like fsck and
 170  mount to quickly and easily find block devices by filesystem UUID and
 171  LABEL.  This allows system administrators to avoid specifiying
 172  filesystems by hard-coded device names, but via a logical naming
 173  system instead.
 174  .
 175  This is a minimal package for debian-installer.
 176
 177 Package: libblkid-dev
 178 Section: libdevel
 179 Priority: extra
 180 Depends: libc6-dev | libc-dev, libblkid1 (= ${binary:Version}), ${misc:Depends}
 181 Architecture: any
 182 Description: block device id library - headers and static libraries
 183  The blkid library which allows system programs like fsck and
 184  mount to quickly and easily find block devices by filesystem UUID and
 185  LABEL.  This allows system administrators to avoid specifiying
 186  filesystems by hard-coded device names, but via a logical naming
 187  system instead.
 188  .
 189  This package contains the development environment for the blkid library.
 190 '')dnl
 191
 192 Package: e2fsprogs-udeb
 193 XC-Package-Type: udeb
 194 Section: debian-installer
 195 Priority: optional
 196 Depends: ${shlibs:Depends}, ${misc:Depends}
 197 Architecture: any
 198 Description: stripped-down versions of e2fsprogs, for debian-installer
 199  This package is an e2fsprogs package built for a reduced size, so that
 200  it can help to save space in debian-installer.
 201  .
 202  Don't attempt to install this package, it has no support for a couple of
 203  features you surely want.  Anyway it should refuse to install.
 204
 205 Package: e2fslibs
 206 Section: libs
 207 Depends: ${shlibs:Depends}, ${misc:Depends}
 208 Replaces: e2fsprogs (<< 1.34-1)
 209 Provides: libext2fs2, libe2p2
 210 Architecture: any
 211 MULTIARCH_HEADERS
 212 Description: ext2/ext3/ext4 file system libraries
 213  The ext2, ext3 and ext4 file systems are successors of the original ext
 214  ("extended") file system. They are the main file system types used for
 215  hard disks on Debian and other Linux systems.
 216  .
 217  This package provides the ext2fs and e2p libraries, for userspace software
 218  that directly accesses extended file systems. Programs that use libext2fs
 219  include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 220  dumpe2fs, chattr, and lsattr.
 221
 222 Package: e2fslibs-dev
 223 Section: libdevel
 224 Priority: extra
 225 Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= ${binary:Version}), ${misc:Depends}
 226 Suggests: doc-base
 227 Provides: ext2fs-dev, e2p-dev
 228 Replaces: libkrb5-dev (<< 1.3)
 229 Architecture: any
 230 Description: ext2/ext3/ext4 file system libraries - headers and static libraries
 231  The ext2, ext3 and ext4 file systems are successors of the original ext
 232  ("extended") file system. They are the main file system types used for
 233  hard disks on Debian and other Linux systems.
 234  .
 235  This package contains the development environment for the ext2fs and e2p
 236  libraries.
 237
 238 Package: e2fsprogs
 239 Essential: yes
 240 ifdef(`UTIL_LINUX_NG',
 241 ``Pre-Depends: ${shlibs:Depends}, ${misc:Depends}, util-linux (>= 2.15~rc1-1)
 242 '',
 243 ``Pre-Depends: ${shlibs:Depends}, ${misc:Depends}
 244 '')dnl
 245 Multi-Arch: foreign
 246 Suggests: gpart, parted, e2fsck-static
 247 Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4)
 248 Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
 249 Architecture: any
 250 Description: ext2/ext3/ext4 file system utilities
 251  The ext2, ext3 and ext4 file systems are successors of the original ext
 252  ("extended") file system. They are the main file system types used for
 253  hard disks on Debian and other Linux systems.
 254  .
 255  This package contains programs for creating, checking, and maintaining
 256  ext2/3/4-based file systems.
 257
 258 Package: e2fsprogs-dbg
 259 Section: debug
 260 Priority: extra
 261 Depends: e2fsprogs (= ${binary:Version}), ${misc:Depends}
 262 Architecture: any
 263 Description: debugging information for e2fsprogs
 264  This package includes the debug information useful for debugging e2fsprogs
 265  and its libraries, contained in the e2fsprogs and e2fsck-static packages.
 266  The debug information is used for execution tracing and core
 267  dump analysis.
 268 ifdef(`UTIL_LINUX_NG',,``
 269 Package: uuid-runtime-dbg
 270 Section: debug
 271 Priority: extra
 272 Depends: uuid-runtime (= ${binary:Version}), ${misc:Depends}
 273 Architecture: any
 274 Description: debugging information for uuid-runtime
 275  This package includes the debug information useful for debugging the
 276  uuid runtime programs, contained in the uuid-runtime package.
 277  The debugging information is used for execution tracing and core
 278  dump analysis.
 279 '')dnl
 280
 281 Package: e2fslibs-dbg
 282 Section: debug
 283 Priority: extra
 284 Depends: e2fslibs (= ${binary:Version}), ${misc:Depends}
 285 Architecture: any
 286 Description: debugging information for e2fslibs
 287  This package includes the debug information useful for debugging the
 288  ext2fs and e2p libraries, contained in the e2fslibs package.  The debug
 289  information is used for execution tracing and core dump analysis.
 290
 291 Package: libcomerr2-dbg
 292 Section: debug
 293 Priority: extra
 294 Depends: libcomerr2 (= ${binary:Version}), ${misc:Depends}
 295 Architecture: any
 296 Description: debugging information for libcomerr2
 297  This package includes the debug information useful for debugging the
 298  com_err library, contained in the libcomerr2 package.  The debugging
 299  information is used for execution tracing and core dump analysis.
 300
 301 Package: libss2-dbg
 302 Section: debug
 303 Priority: extra
 304 Depends: libss2 (= ${binary:Version}), ${misc:Depends}
 305 Architecture: any
 306 Description: debugging information for libss2
 307  This package includes the debug information useful for debugging the
 308  ss library, contained in the libss2 package.  The debug information
 309  is used for execution tracing and core dump analysis.
 310 ifdef(`UTIL_LINUX_NG',,``
 311 Package: libblkid1-dbg
 312 Section: debug
 313 Priority: extra
 314 Depends: libblkid1 (= ${binary:Version}), ${misc:Depends}
 315 Architecture: any
 316 Description: debugging information for libblkid1
 317  This package includes the debug information useful for debugging the
 318  blkid library, contained in the libblkid1 package.  The debug
 319  information is used for execution tracing and core dump analysis.
 320
 321 Package: libuuid1-dbg
 322 Section: debug
 323 Priority: extra
 324 Depends: libuuid1 (= ${binary:Version}), ${misc:Depends}
 325 Architecture: any
 326 Description: debugging information for libuuid1
 327  This package includes the debug information useful for debugging the
 328  UUID library, contained in the libuuid1 package.  The debug
 329  information is used for execution tracing and core dump analysis.
 330 '')dnl