]> git.ipfire.org Git - thirdparty/binutils-gdb.git/blob - gas/configure.in
Minor tweaks to d10v configuration
[thirdparty/binutils-gdb.git] / gas / configure.in
1 dnl Process this file with autoconf to produce a configure script.
2 dnl
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
5 dnl
6 dnl
7 AC_PREREQ(2.5)dnl v2.5 needed for --bindir et al
8 AC_INIT(as.h)dnl
9 dnl
10 user_bfd_gas=
11 AC_ARG_ENABLE(bfd-assembler,
12 [ --enable-bfd-assembler use BFD back end for writing object files],
13 [case "${enableval}" in
14 yes) need_bfd=yes user_bfd_gas=yes ;;
15 no) user_bfd_gas=no ;;
16 *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
17 esac])dnl
18 AC_ARG_ENABLE(targets,
19 [ targets alternative target configurations besides the primary],
20 [case "${enableval}" in
21 yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
22 ;;
23 no) enable_targets= ;;
24 *) enable_targets=$enableval ;;
25 esac])dnl
26 AC_ARG_ENABLE(shared,
27 [ --enable-shared build shared BFD library],
28 [case "${enableval}" in
29 yes) shared=true shared_bfd=true shared_opcodes=true ;;
30 no) shared=false ;;
31 *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
32 *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
33 *bfd*) shared=true shared_bfd=true ;;
34 *opcodes*) shared=true shared_opcodes=true ;;
35 *) shared=false ;;
36 esac])dnl
37
38 # Generate a header file -- gets more post-processing by Makefile later.
39 AC_CONFIG_HEADER(conf)
40
41 dnl For recursion to work right, this must be an absolute pathname.
42 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
43 AC_CANONICAL_SYSTEM
44 AC_ARG_PROGRAM
45
46 te_file=generic
47
48 canon_targets=""
49 if test -n "$enable_targets" ; then
50 for t in `echo $enable_targets | sed 's/,/ /g'`; do
51 result=`$ac_config_sub $t 2>/dev/null`
52 if test -n "$result" ; then
53 canon_targets="$canon_targets $result"
54 # else
55 # # Permit "all", etc. We don't support it yet though.
56 # canon_targets="$canon_targets $t"
57 fi
58 done
59 GAS_UNIQ(canon_targets)
60 fi
61
62 emulations=""
63
64 for this_target in $target $canon_targets ; do
65
66 eval `echo $this_target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
67
68 # check for architecture variants
69 case ${cpu} in
70 armeb) cpu_type=arm endian=big ;;
71 arm*) cpu_type=arm endian=little ;;
72 hppa*) cpu_type=hppa ;;
73 changequote(,)dnl
74 i[456]86) cpu_type=i386 ;;
75 m680[012346]0) cpu_type=m68k ;;
76 m68008) cpu_type=m68k ;;
77 m683??) cpu_type=m68k ;;
78 changequote([,])dnl
79 m8*) cpu_type=m88k ;;
80 mips*el) cpu_type=mips endian=little;;
81 mips*) cpu_type=mips endian=big ;;
82 powerpcle*) cpu_type=ppc endian=little ;;
83 powerpc*) cpu_type=ppc endian=big ;;
84 rs6000*) cpu_type=ppc ;;
85 sparc64) cpu_type=sparc want_sparc_v9=true ;;
86 sparc*) cpu_type=sparc ;;
87 *) cpu_type=${cpu} ;;
88 esac
89
90 if test ${this_target} = $target ; then
91 target_cpu_type=${cpu_type}
92 elif test ${target_cpu_type} != ${cpu_type} ; then
93 continue
94 fi
95
96 targ=${cpu_type}
97 generic_target=${cpu_type}-$vendor-$os
98 dev=no
99 bfd_gas=no
100 em=generic
101
102 # assign object format
103 case ${generic_target} in
104 a29k-*-coff) fmt=coff targ=ebmon29k ;;
105 a29k-amd-udi) fmt=coff targ=ebmon29k ;;
106 a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
107 a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
108 a29k-*-vxworks*) fmt=coff ;;
109
110 alpha-*-netware*) fmt=ecoff ;;
111 alpha-*-osf*) fmt=ecoff ;;
112 alpha-*-linuxecoff*) fmt=ecoff ;;
113 alpha-*-linux*) fmt=elf em=linux ;;
114
115 # start-sanitize-arc
116 arc-*-elf*) fmt=elf bfd_gas=yes ;;
117 # end-sanitize-arc
118
119 arm-*-riscix*) fmt=aout targ=arm-lit em=riscix ;;
120 arm-*-aout) fmt=aout
121 case "$endian" in
122 big) targ=arm-big ;;
123 *) targ=arm-lit ;;
124 esac
125 ;;
126 arm-*-coff) fmt=coff ;;
127 arm-*-riscix*) fmt=aout ;;
128 arm-*-pe) fmt=coff targ=armcoff em=pe ;;
129
130 # start-sanitize-d10v
131 d10v-*-*) fmt=elf bfd_gas=yes ;;
132 # end-sanitize-d10v
133
134 hppa-*-*elf*) fmt=elf em=hppa ;;
135 hppa-*-lites*) fmt=elf em=hppa ;;
136 hppa-*-osf*) fmt=som em=hppa ;;
137 hppa-*-hpux*) fmt=som em=hppa ;;
138 hppa-*-bsd*) fmt=som em=hppa ;;
139 hppa-*-hiux*) fmt=som em=hppa ;;
140
141 h8300-*-coff) fmt=coff ;;
142
143 i386-ibm-aix*) fmt=coff targ=i386coff
144 em=i386aix ;;
145 i386-*-bsd*) fmt=aout em=386bsd ;;
146 i386-*-netbsd0.8) fmt=aout em=386bsd ;;
147 i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
148 i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
149 i386-*-linux*coff*) fmt=coff em=linux
150 targ=i386coff ;;
151 i386-*-linux*) fmt=elf em=linux ;;
152 i386-*-lynxos*) fmt=coff targ=i386coff
153 em=lynx ;;
154 i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
155 fmt=elf ;;
156 i386-*-sco*elf*) fmt=elf targ=sco5 ;;
157 i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
158 fmt=coff targ=i386coff ;;
159 i386-*-vsta) fmt=aout ;;
160 i386-*-go32) fmt=coff targ=i386coff ;;
161 i386-*-rtems*) fmt=coff targ=i386coff ;;
162 i386-*-gnu*) fmt=elf ;;
163 i386-*-mach*)
164 fmt=aout em=mach bfd_gas=yes ;;
165 i386-*-msdos*) fmt=aout ;;
166 i386-*-moss*) fmt=elf ;;
167 i386-*-pe) fmt=coff targ=i386coff em=pe ;;
168 i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
169 i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
170 i960-*-bout) fmt=bout ;;
171 i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
172 i960-*-rtems*) fmt=coff em=ic960 targ=ic960coff ;;
173 i960-*-nindy*) fmt=bout ;;
174 i960-*-vxworks4*) fmt=bout ;;
175 i960-*-vxworks5.0) fmt=bout ;;
176 i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
177 i960-*-vxworks*) fmt=bout ;;
178
179 m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
180 fmt=aout em=sun3 ;;
181 m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
182 m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
183 m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
184 m68k-*-sysv4 | m68k-*-elf) # must be before -sysv*
185 fmt=elf ;;
186 m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
187 fmt=coff targ=m68kcoff ;;
188 m68k-*-hpux*) fmt=hp300 em=hp300 ;;
189 m68k-*-linux*aout*) fmt=aout em=linux ;;
190 m68k-*-linux*) fmt=elf em=linux ;;
191 m68k-*-lynxos*) fmt=coff targ=m68kcoff
192 em=lynx ;;
193 m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
194 m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
195 m68k-*-psos*) fmt=elf em=psos;;
196
197 m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
198 m88k-*-coff*) fmt=coff targ=m88kcoff ;;
199
200 # don't change em like *-*-bsd does
201 mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
202 mips-dec-bsd*) fmt=aout targ=mips-lit ;;
203 mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
204 mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
205 mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
206 mips-*-osf*) fmt=ecoff targ=mips-lit endian=little ;;
207 mips-*-ecoff*) fmt=ecoff
208 case "$endian" in
209 big) targ=mips-big ;;
210 *) targ=mips-lit ;;
211 esac
212 ;;
213 mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
214 mips-*-gnu*) fmt=aout
215 case "$endian" in
216 big) targ=mips-big ;;
217 *) targ=mips-lit ;;
218 esac
219 ;;
220 mips-*-irix5*) fmt=elf targ=mips-big ;;
221 mips-*-irix*) fmt=ecoff targ=mips-big ;;
222 mips-*-riscos*) fmt=ecoff targ=mips-big ;;
223 mips-*-sysv*) fmt=ecoff targ=mips-big ;;
224 mips-*-elf*) fmt=elf
225 case "$endian" in
226 big) targ=mips-big ;;
227 *) targ=mips-lit ;;
228 esac
229 ;;
230 ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
231 fmt=coff em=pe
232 case "$endian" in
233 big) targ=ppc-big ;;
234 *) targ=ppc-lit ;;
235 esac
236 ;;
237 ppc-*-aix*) fmt=coff ;;
238 ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
239 fmt=elf
240 case "$endian" in
241 big) targ=ppc-big ;;
242 *) targ=ppc-lit ;;
243 esac
244 ;;
245 ppc-*-linux*) fmt=elf
246 case "$endian" in
247 big) targ=ppc-big ;;
248 *) AC_MSG_ERROR(Linux must be configured big endian) ;;
249 esac
250 ;;
251 ppc-*-solaris*) fmt=elf
252 case "$endian" in
253 big) AC_MSG_ERROR(Solaris must be configured little endian) ;;
254 *) targ=ppc-sol ;;
255 esac
256 ;;
257 ppc-*-rtems*)
258 fmt=elf
259 case "$endian" in
260 big) targ=ppc-big ;;
261 *) targ=ppc-lit ;;
262 esac
263 ;;
264 ppc-*-macos* | ppc-*-mpw*)
265 fmt=coff em=macos ;;
266 ppc-*-netware*) fmt=elf em=ppcnw ;;
267
268 sh-*-coff) fmt=coff ;;
269
270 ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
271 ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
272
273 sparc-*-rtems*) fmt=aout ;;
274 sparc-*-sunos4*) fmt=aout em=sun3 ;;
275 sparc-*-aout | sparc*-*-vxworks*)
276 fmt=aout ;;
277 sparc-*-coff) fmt=coff ;;
278 sparc-*-lynxos*) fmt=coff em=lynx ;;
279 sparc-fujitsu-none) fmt=aout ;;
280 sparc-*-elf | sparc-*-solaris*)
281 fmt=elf ;;
282 sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
283
284 vax-*-bsd* | vax-*-ultrix*)
285 fmt=aout ;;
286 vax-*-vms) fmt=vms ;;
287
288 z8k-*-coff | z8k-*-sim)
289 fmt=coff ;;
290
291 w65-*-*) fmt=coff ;;
292
293 *-*-aout | *-*-scout)
294 fmt=aout ;;
295 *-*-nindy*)
296 fmt=bout ;;
297 *-*-bsd*)
298 fmt=aout em=sun3 ;;
299 *-*-generic) fmt=generic ;;
300 *-*-xray | *-*-hms) fmt=coff ;;
301 *-*-sim) fmt=coff ;;
302 *-*-elf | *-*-sysv4* | *-*-solaris*)
303 AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
304 fmt=elf dev=yes ;;
305 *-*-vxworks) fmt=aout ;;
306 *-*-netware) fmt=elf ;;
307 esac
308
309 case ${cpu_type}-${fmt} in
310 alpha-*) bfd_gas=yes ;;
311 arm-*) bfd_gas=yes ;;
312 # not yet
313 # i386-aout) bfd_gas=preferred ;;
314 mips-*) bfd_gas=yes ;;
315 ns32k-*) bfd_gas=yes ;;
316 ppc-*) bfd_gas=yes ;;
317 sparc-*) bfd_gas=yes ;;
318 *-elf) bfd_gas=yes ;;
319 *-ecoff) bfd_gas=yes ;;
320 *-som) bfd_gas=yes ;;
321 *) ;;
322 esac
323
324 # Other random stuff.
325
326 # do we need the opcodes library?
327 case ${cpu_type} in
328 vax | i386)
329 ;;
330 *)
331 need_opcodes=yes
332 if test "${shared_opcodes}" = "true"; then
333 # A shared libopcodes must be linked against libbfd.
334 need_bfd=yes
335 fi
336 ;;
337 esac
338
339 test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
340
341 case ${cpu}-${vendor}-${os} in
342 sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
343 esac
344
345 case ${cpu_type} in
346 m68k)
347 case ${extra_objects} in
348 *m68k-parse.o*) ;;
349 *) extra_objects="$extra_objects m68k-parse.o" ;;
350 esac
351 ;;
352 esac
353
354 # See if we really can support this configuration with the emulation code.
355
356 if test $this_target = $target ; then
357 primary_bfd_gas=$bfd_gas
358 obj_format=$fmt
359 gas_target=$targ
360 te_file=$em
361
362 if test $bfd_gas = no ; then
363 # Can't support other configurations this way.
364 break
365 fi
366 elif test $bfd_gas = no ; then
367 # Can't support this configuration.
368 break
369 fi
370
371 # From target name and format, produce a list of supported emulations.
372
373 case ${generic_target}-${fmt} in
374 mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
375 mips-*-*-ecoff) case "$endian" in
376 big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
377 *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
378 esac ;;
379 mips-*-*-elf) case "$endian" in
380 big) emulation="mipsbelf mipslelf mipself" ;;
381 *) emulation="mipslelf mipsbelf mipself" ;;
382 esac ;;
383 esac
384
385 emulations="$emulations $emulation"
386
387 done
388
389 # Assign floating point type. Most processors with FP support
390 # IEEE FP. On those that don't support FP at all, usually IEEE
391 # is emulated.
392 case ${target_cpu} in
393 vax | tahoe ) atof=${target_cpu} ;;
394 *) atof=ieee ;;
395 esac
396
397 case "${obj_format}" in
398 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
399 esac
400
401 dnl
402 dnl Make sure the desired support files exist.
403 dnl
404
405 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
406 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
407 fi
408
409 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
410 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
411 fi
412
413 # and target makefile frag
414
415 target_frag=${srcdir}/config/${gas_target}.mt
416 if test ! -r ${target_frag}; then
417 target_frag=/dev/null # ick! but subst_file can't be conditionalized
418 fi
419 AC_SUBST_FILE(target_frag)
420
421 case ${user_bfd_gas}-${primary_bfd_gas} in
422 yes-yes | no-no)
423 # We didn't override user's choice.
424 ;;
425 no-yes)
426 AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
427 ;;
428 no-preferred)
429 primary_bfd_gas=no
430 ;;
431 *-preferred)
432 primary_bfd_gas=yes
433 ;;
434 yes-*)
435 primary_bfd_gas=yes
436 ;;
437 -*)
438 # User specified nothing.
439 ;;
440 esac
441
442 # Some COFF configurations want these random other flags set.
443 case ${obj_format} in
444 coff)
445 case ${target_cpu_type} in
446 i386) AC_DEFINE(I386COFF) ;;
447 m68k) AC_DEFINE(M68KCOFF) ;;
448 m88k) AC_DEFINE(M88KCOFF) ;;
449 esac
450 ;;
451 esac
452
453 # Getting this done right is going to be a bitch. Each configuration specified
454 # with --enable-targets=... should be checked for environment, format, cpu, and
455 # bfd_gas setting.
456 #
457 # For each configuration, the necessary object file support code must be linked
458 # in. This might be only one, it might be up to four. The necessary emulation
459 # code needs to be provided, too.
460 #
461 # And then there's "--enable-targets=all"....
462 #
463 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
464
465 formats="${obj_format}"
466 emfiles=""
467 EMULATIONS=""
468 GAS_UNIQ(emulations)
469 for em in . $emulations ; do
470 case $em in
471 .) continue ;;
472 mipsbelf | mipslelf)
473 fmt=elf file=mipself ;;
474 mipsbecoff | mipslecoff)
475 fmt=ecoff file=mipsecoff ;;
476 esac
477 formats="$formats $fmt"
478 emfiles="$emfiles e-$file.o"
479 EMULATIONS="$EMULATIONS &$em,"
480 done
481 GAS_UNIQ(formats)
482 GAS_UNIQ(emfiles)
483 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
484 for fmt in $formats ; do
485 case $fmt in
486 aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
487 bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
488 coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
489 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
490 elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
491 generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
492 hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
493 ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
494 som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
495 vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
496 esac
497 extra_objects="$extra_objects obj-$fmt.o"
498 done
499 obj_format=multi
500 fi
501 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
502 te_file=multi
503 extra_objects="$extra_objects $emfiles"
504 DEFAULT_EMULATION=`set . $emulations ; echo $2`
505 AC_DEFINE(USE_EMULATIONS)
506 fi
507 AC_SUBST(extra_objects)
508 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
509 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
510
511 files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
512 config/obj-${obj_format}.h config/obj-${obj_format}.c \
513 config/te-${te_file}.h config/atof-${atof}.c \
514 $extra_files"
515 links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
516 $extra_links"
517
518 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
519 yes-*-coff) need_bfd=yes ;;
520 no-*-coff) need_bfd=yes
521 AC_DEFINE(MANY_SEGMENTS) ;;
522 esac
523
524 reject_dev_configs=yes
525
526 case ${reject_dev_configs}-${dev} in
527 yes-yes) # Oops.
528 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
529 ;;
530 esac
531
532 AC_SUBST(target_cpu_type)
533 AC_SUBST(obj_format)
534 AC_SUBST(atof)
535 dnl AC_SUBST(emulation)
536
537 AC_LINK_FILES($files, $links)
538
539 case "${primary_bfd_gas}" in
540 yes) AC_DEFINE(BFD_ASSEMBLER)
541 need_bfd=yes ;;
542 esac
543
544 # do we need the opcodes library?
545 case "${need_opcodes}" in
546 yes)
547 OPCODES_DEP=../opcodes/libopcodes.a
548 OPCODES_LIB='-L../opcodes -lopcodes'
549
550 # We need to handle some special cases for shared libraries.
551 case "${host}" in
552 *-*-sunos*)
553 # On SunOS, we must link against the name we are going to install,
554 # not -lbfd, since SunOS does not support SONAME.
555 if test "${shared_opcodes}" = "true"; then
556 OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
557 fi
558 ;;
559 alpha*-*-osf*)
560 # On Alpha OSF/1, the native linker searches all the -L
561 # directories for any LIB.so files, and only then searches for any
562 # LIB.a files. That means that if there is an installed
563 # libbfd.so, but this build is not done with --enable-shared, the
564 # link will wind up being against the install libbfd.so rather
565 # than the newly built libbfd. To avoid this, we must explicitly
566 # link against libbfd.a when --enable-shared is not used.
567 if test "${shared_opcodes}" != "true"; then
568 OPCODES_LIB='../opcodes/libopcodes.a'
569 fi
570 ;;
571 esac
572 ;;
573 esac
574 AC_SUBST(OPCODES_DEP)
575 AC_SUBST(OPCODES_LIB)
576
577 case "${need_bfd}" in
578 yes)
579 BFDDEP=../bfd/libbfd.a
580 BFDLIB='-L../bfd -lbfd'
581 ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
582
583 # We need to handle some special cases for shared libraries
584 case "${host}" in
585 *-*-sunos*)
586 # On SunOS, we must link against the name we are going to install,
587 # not -lbfd, since SunOS does not support SONAME.
588 if test "${shared_bfd}" = "true"; then
589 BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
590 fi
591 ;;
592 alpha*-*-osf*)
593 # On Alpha OSF/1, the native linker searches all the -L
594 # directories for any LIB.so files, and only then searches for any
595 # LIB.a files. That means that if there is an installed
596 # libbfd.so, but this build is not done with --enable-shared, the
597 # link will wind up being against the install libbfd.so rather
598 # than the newly built libbfd. To avoid this, we must explicitly
599 # link against libbfd.a when --enable-shared is not used.
600 if test "${shared_bfd}" != "true"; then
601 BFDLIB='../bfd/libbfd.a'
602 fi
603 ;;
604 esac
605 ;;
606 esac
607 AC_SUBST(BFDDEP)
608 AC_SUBST(BFDLIB)
609 AC_SUBST(ALL_OBJ_DEPS)
610
611 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
612 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
613 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
614 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
615 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
616
617 AC_PROG_CC
618 AC_PROG_INSTALL
619
620 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
621
622 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
623 # people who are not cross-compiling but are compiling cross-assemblers.
624 AC_MSG_CHECKING(whether compiling a cross-assembler)
625 if test "${host}" = "${target}"; then
626 cross_gas=no
627 else
628 cross_gas=yes
629 AC_DEFINE(CROSS_COMPILE)
630 fi
631 AC_MSG_RESULT($cross_gas)
632
633 dnl ansidecl.h will deal with const
634 dnl AC_CONST
635 AC_FUNC_ALLOCA
636 AC_C_INLINE
637
638 # VMS doesn't have unlink.
639 AC_CHECK_FUNCS(unlink remove, break)
640
641 # Some systems don't have sbrk().
642 AC_CHECK_FUNCS(sbrk)
643
644 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
645 # enough, but on some of those systems, the assert macro relies on requoting
646 # working properly!
647 GAS_WORKING_ASSERT
648
649 # On some systems, the system header files may not declare malloc, realloc,
650 # and free. There are places where gas needs these functions to have been
651 # declared -- such as when taking their addresses.
652 gas_test_headers="
653 #ifdef HAVE_MEMORY_H
654 #include <memory.h>
655 #endif
656 #ifdef HAVE_STRING_H
657 #include <string.h>
658 #endif
659 #ifdef HAVE_STDLIB_H
660 #include <stdlib.h>
661 #endif
662 #ifdef HAVE_UNISTD_H
663 #include <unistd.h>
664 #endif
665 "
666 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
667 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
668
669 # Does errno.h declare errno, or do we have to add a separate declaration
670 # for it?
671 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
672 #ifdef HAVE_ERRNO_H
673 #include <errno.h>
674 #endif
675 ])
676
677 HLDFLAGS=
678 RPATH_ENVVAR=LD_LIBRARY_PATH
679 # If we have shared libraries, try to set rpath reasonably.
680 if test "${shared}" = "true"; then
681 case "${host}" in
682 *-*-hpux*)
683 HLDFLAGS='-Wl,+s,+b,$(libdir)'
684 RPATH_ENVVAR=SHLIB_PATH
685 ;;
686 *-*-irix5*)
687 HLDFLAGS='-Wl,-rpath,$(libdir)'
688 ;;
689 *-*-linux*aout*)
690 ;;
691 *-*-linux*)
692 HLDFLAGS='-Wl,-rpath,$(libdir)'
693 ;;
694 *-*-sysv4* | *-*-solaris*)
695 HLDFLAGS='-R $(libdir)'
696 ;;
697 esac
698 fi
699
700 # On SunOS, if the linker supports the -rpath option, use it to
701 # prevent ../bfd and ../opcodes from being included in the run time
702 # search path.
703 case "${host}" in
704 *-*-sunos*)
705 echo 'main () { }' > conftest.c
706 ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
707 if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
708 :
709 elif grep 'No such file' conftest.t >/dev/null 2>&1; then
710 :
711 elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
712 :
713 elif test "${shared}" = "true"; then
714 HLDFLAGS='-Wl,-rpath=$(libdir)'
715 else
716 HLDFLAGS='-Wl,-rpath='
717 fi
718 rm -f conftest.t conftest.c conftest
719 ;;
720 esac
721 AC_SUBST(HLDFLAGS)
722 AC_SUBST(RPATH_ENVVAR)
723
724 dnl This must come last.
725 AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)