]> git.ipfire.org Git - thirdparty/binutils-gdb.git/blob - gas/configure.in
* configure.in: Add mips-*-irix6* target. Handle Irix 6 like Irix
[thirdparty/binutils-gdb.git] / gas / configure.in
1 dnl Process this file with autoconf to produce a configure script.
2 dnl
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
5 dnl
6 dnl
7 AC_PREREQ(2.5)dnl v2.5 needed for --bindir et al
8 AC_INIT(as.h)dnl
9 dnl
10 user_bfd_gas=
11 AC_ARG_ENABLE(bfd-assembler,
12 [ --enable-bfd-assembler use BFD back end for writing object files],
13 [case "${enableval}" in
14 yes) need_bfd=yes user_bfd_gas=yes ;;
15 no) user_bfd_gas=no ;;
16 *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
17 esac])dnl
18 AC_ARG_ENABLE(targets,
19 [ targets alternative target configurations besides the primary],
20 [case "${enableval}" in
21 yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
22 ;;
23 no) enable_targets= ;;
24 *) enable_targets=$enableval ;;
25 esac])dnl
26 AC_ARG_ENABLE(shared,
27 [ --enable-shared build shared BFD library],
28 [case "${enableval}" in
29 yes) shared=true shared_bfd=true shared_opcodes=true ;;
30 no) shared=false ;;
31 *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
32 *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
33 *bfd*) shared=true shared_bfd=true ;;
34 *opcodes*) shared=true shared_opcodes=true ;;
35 *) shared=false ;;
36 esac])dnl
37
38 # Generate a header file -- gets more post-processing by Makefile later.
39 AC_CONFIG_HEADER(conf)
40
41 dnl For recursion to work right, this must be an absolute pathname.
42 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
43 AC_CANONICAL_SYSTEM
44 AC_ARG_PROGRAM
45
46 te_file=generic
47
48 canon_targets=""
49 if test -n "$enable_targets" ; then
50 for t in `echo $enable_targets | sed 's/,/ /g'`; do
51 result=`$ac_config_sub $t 2>/dev/null`
52 if test -n "$result" ; then
53 canon_targets="$canon_targets $result"
54 # else
55 # # Permit "all", etc. We don't support it yet though.
56 # canon_targets="$canon_targets $t"
57 fi
58 done
59 GAS_UNIQ(canon_targets)
60 fi
61
62 emulations=""
63
64 for this_target in $target $canon_targets ; do
65
66 eval `echo $this_target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
67
68 # check for architecture variants
69 case ${cpu} in
70 armeb) cpu_type=arm endian=big ;;
71 arm*) cpu_type=arm endian=little ;;
72 hppa*) cpu_type=hppa ;;
73 changequote(,)dnl
74 i[456]86) cpu_type=i386 ;;
75 m680[012346]0) cpu_type=m68k ;;
76 m68008) cpu_type=m68k ;;
77 m683??) cpu_type=m68k ;;
78 changequote([,])dnl
79 m8*) cpu_type=m88k ;;
80 mips*el) cpu_type=mips endian=little;;
81 mips*) cpu_type=mips endian=big ;;
82 powerpcle*) cpu_type=ppc endian=little ;;
83 powerpc*) cpu_type=ppc endian=big ;;
84 rs6000*) cpu_type=ppc ;;
85 sparc64) cpu_type=sparc want_sparc_v9=true ;;
86 sparc*) cpu_type=sparc ;;
87 *) cpu_type=${cpu} ;;
88 esac
89
90 if test ${this_target} = $target ; then
91 target_cpu_type=${cpu_type}
92 elif test ${target_cpu_type} != ${cpu_type} ; then
93 continue
94 fi
95
96 targ=${cpu_type}
97 generic_target=${cpu_type}-$vendor-$os
98 dev=no
99 bfd_gas=no
100 em=generic
101
102 # assign object format
103 case ${generic_target} in
104 a29k-*-coff) fmt=coff targ=ebmon29k ;;
105 a29k-amd-udi) fmt=coff targ=ebmon29k ;;
106 a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
107 a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
108 a29k-*-vxworks*) fmt=coff ;;
109
110 alpha-*-netware*) fmt=ecoff ;;
111 alpha-*-osf*) fmt=ecoff ;;
112 alpha-*-linuxecoff*) fmt=ecoff ;;
113 alpha-*-linux*) fmt=elf em=linux ;;
114
115 # start-sanitize-arc
116 arc-*-elf*) fmt=elf bfd_gas=yes ;;
117 # end-sanitize-arc
118
119 arm-*-riscix*) fmt=aout targ=arm-lit em=riscix ;;
120 arm-*-aout) fmt=aout
121 case "$endian" in
122 big) targ=arm-big ;;
123 *) targ=arm-lit ;;
124 esac
125 ;;
126 arm-*-coff) fmt=coff ;;
127 arm-*-riscix*) fmt=aout ;;
128 arm-*-pe) fmt=coff targ=armcoff em=pe ;;
129
130 # start-sanitize-d10v
131 d10v-*-*) fmt=elf bfd_gas=yes ;;
132 # end-sanitize-d10v
133
134 hppa-*-*elf*) fmt=elf em=hppa ;;
135 hppa-*-lites*) fmt=elf em=hppa ;;
136 hppa-*-osf*) fmt=som em=hppa ;;
137 hppa-*-hpux*) fmt=som em=hppa ;;
138 hppa-*-bsd*) fmt=som em=hppa ;;
139 hppa-*-hiux*) fmt=som em=hppa ;;
140
141 h8300-*-coff) fmt=coff ;;
142
143 i386-ibm-aix*) fmt=coff targ=i386coff
144 em=i386aix ;;
145 i386-*-bsd*) fmt=aout em=386bsd ;;
146 i386-*-netbsd0.8) fmt=aout em=386bsd ;;
147 i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
148 i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
149 i386-*-linux*coff*) fmt=coff em=linux
150 targ=i386coff ;;
151 i386-*-linux*) fmt=elf em=linux ;;
152 i386-*-lynxos*) fmt=coff targ=i386coff
153 em=lynx ;;
154 i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
155 fmt=elf ;;
156 i386-*-sco*elf*) fmt=elf targ=sco5 ;;
157 i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
158 fmt=coff targ=i386coff ;;
159 i386-*-vsta) fmt=aout ;;
160 i386-*-go32) fmt=coff targ=i386coff ;;
161 i386-*-rtems*) fmt=coff targ=i386coff ;;
162 i386-*-gnu*) fmt=elf ;;
163 i386-*-mach*)
164 fmt=aout em=mach bfd_gas=yes ;;
165 i386-*-msdos*) fmt=aout ;;
166 i386-*-moss*) fmt=elf ;;
167 i386-*-pe) fmt=coff targ=i386coff em=pe ;;
168 i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
169 i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
170 i960-*-bout) fmt=bout ;;
171 i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
172 i960-*-rtems*) fmt=coff em=ic960 targ=ic960coff ;;
173 i960-*-nindy*) fmt=bout ;;
174 i960-*-vxworks4*) fmt=bout ;;
175 i960-*-vxworks5.0) fmt=bout ;;
176 i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
177 i960-*-vxworks*) fmt=bout ;;
178
179 m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
180 fmt=aout em=sun3 ;;
181 m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
182 m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
183 m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
184 m68k-*-sysv4 | m68k-*-elf) # must be before -sysv*
185 fmt=elf ;;
186 m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
187 fmt=coff targ=m68kcoff ;;
188 m68k-*-hpux*) fmt=hp300 em=hp300 ;;
189 m68k-*-linux*aout*) fmt=aout em=linux ;;
190 m68k-*-linux*) fmt=elf em=linux ;;
191 m68k-*-lynxos*) fmt=coff targ=m68kcoff
192 em=lynx ;;
193 m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
194 m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
195 m68k-*-psos*) fmt=elf em=psos;;
196
197 m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
198 m88k-*-coff*) fmt=coff targ=m88kcoff ;;
199
200 # don't change em like *-*-bsd does
201 mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
202 mips-dec-bsd*) fmt=aout targ=mips-lit ;;
203 mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
204 mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
205 mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
206 mips-*-osf*) fmt=ecoff targ=mips-lit endian=little ;;
207 mips-*-ecoff*) fmt=ecoff
208 case "$endian" in
209 big) targ=mips-big ;;
210 *) targ=mips-lit ;;
211 esac
212 ;;
213 mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
214 mips-*-gnu*) fmt=aout
215 case "$endian" in
216 big) targ=mips-big ;;
217 *) targ=mips-lit ;;
218 esac
219 ;;
220 mips-*-irix6*) fmt=elf targ=mips-big ;;
221 mips-*-irix5*) fmt=elf targ=mips-big ;;
222 mips-*-irix*) fmt=ecoff targ=mips-big ;;
223 mips-*-riscos*) fmt=ecoff targ=mips-big ;;
224 mips-*-sysv*) fmt=ecoff targ=mips-big ;;
225 mips-*-elf*) fmt=elf
226 case "$endian" in
227 big) targ=mips-big ;;
228 *) targ=mips-lit ;;
229 esac
230 ;;
231 ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
232 fmt=coff em=pe
233 case "$endian" in
234 big) targ=ppc-big ;;
235 *) targ=ppc-lit ;;
236 esac
237 ;;
238 ppc-*-aix*) fmt=coff ;;
239 ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
240 fmt=elf
241 case "$endian" in
242 big) targ=ppc-big ;;
243 *) targ=ppc-lit ;;
244 esac
245 ;;
246 ppc-*-linux*) fmt=elf
247 case "$endian" in
248 big) targ=ppc-big ;;
249 *) AC_MSG_ERROR(Linux must be configured big endian) ;;
250 esac
251 ;;
252 ppc-*-solaris*) fmt=elf
253 case "$endian" in
254 big) AC_MSG_ERROR(Solaris must be configured little endian) ;;
255 *) targ=ppc-sol ;;
256 esac
257 ;;
258 ppc-*-rtems*)
259 fmt=elf
260 case "$endian" in
261 big) targ=ppc-big ;;
262 *) targ=ppc-lit ;;
263 esac
264 ;;
265 ppc-*-macos* | ppc-*-mpw*)
266 fmt=coff em=macos ;;
267 ppc-*-netware*) fmt=elf em=ppcnw ;;
268
269 sh-*-coff) fmt=coff ;;
270
271 ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
272 ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
273
274 sparc-*-rtems*) fmt=aout ;;
275 sparc-*-sunos4*) fmt=aout em=sun3 ;;
276 sparc-*-aout | sparc*-*-vxworks*)
277 fmt=aout ;;
278 sparc-*-coff) fmt=coff ;;
279 sparc-*-lynxos*) fmt=coff em=lynx ;;
280 sparc-fujitsu-none) fmt=aout ;;
281 sparc-*-elf | sparc-*-solaris*)
282 fmt=elf ;;
283 sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
284
285 vax-*-bsd* | vax-*-ultrix*)
286 fmt=aout ;;
287 vax-*-vms) fmt=vms ;;
288
289 z8k-*-coff | z8k-*-sim)
290 fmt=coff ;;
291
292 w65-*-*) fmt=coff ;;
293
294 *-*-aout | *-*-scout)
295 fmt=aout ;;
296 *-*-nindy*)
297 fmt=bout ;;
298 *-*-bsd*)
299 fmt=aout em=sun3 ;;
300 *-*-generic) fmt=generic ;;
301 *-*-xray | *-*-hms) fmt=coff ;;
302 *-*-sim) fmt=coff ;;
303 *-*-elf | *-*-sysv4* | *-*-solaris*)
304 AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
305 fmt=elf dev=yes ;;
306 *-*-vxworks) fmt=aout ;;
307 *-*-netware) fmt=elf ;;
308 esac
309
310 case ${cpu_type}-${fmt} in
311 alpha-*) bfd_gas=yes ;;
312 arm-*) bfd_gas=yes ;;
313 # not yet
314 # i386-aout) bfd_gas=preferred ;;
315 mips-*) bfd_gas=yes ;;
316 ns32k-*) bfd_gas=yes ;;
317 ppc-*) bfd_gas=yes ;;
318 sparc-*) bfd_gas=yes ;;
319 *-elf) bfd_gas=yes ;;
320 *-ecoff) bfd_gas=yes ;;
321 *-som) bfd_gas=yes ;;
322 *) ;;
323 esac
324
325 # Other random stuff.
326
327 # do we need the opcodes library?
328 case ${cpu_type} in
329 vax | i386)
330 ;;
331 *)
332 need_opcodes=yes
333 if test "${shared_opcodes}" = "true"; then
334 # A shared libopcodes must be linked against libbfd.
335 need_bfd=yes
336 fi
337 ;;
338 esac
339
340 test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
341
342 case ${cpu}-${vendor}-${os} in
343 sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
344 esac
345
346 case ${cpu_type} in
347 m68k)
348 case ${extra_objects} in
349 *m68k-parse.o*) ;;
350 *) extra_objects="$extra_objects m68k-parse.o" ;;
351 esac
352 ;;
353 esac
354
355 # See if we really can support this configuration with the emulation code.
356
357 if test $this_target = $target ; then
358 primary_bfd_gas=$bfd_gas
359 obj_format=$fmt
360 gas_target=$targ
361 te_file=$em
362
363 if test $bfd_gas = no ; then
364 # Can't support other configurations this way.
365 break
366 fi
367 elif test $bfd_gas = no ; then
368 # Can't support this configuration.
369 break
370 fi
371
372 # From target name and format, produce a list of supported emulations.
373
374 case ${generic_target}-${fmt} in
375 mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
376 mips-*-*-ecoff) case "$endian" in
377 big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
378 *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
379 esac ;;
380 mips-*-*-elf) case "$endian" in
381 big) emulation="mipsbelf mipslelf mipself" ;;
382 *) emulation="mipslelf mipsbelf mipself" ;;
383 esac ;;
384 esac
385
386 emulations="$emulations $emulation"
387
388 done
389
390 # Assign floating point type. Most processors with FP support
391 # IEEE FP. On those that don't support FP at all, usually IEEE
392 # is emulated.
393 case ${target_cpu} in
394 vax | tahoe ) atof=${target_cpu} ;;
395 *) atof=ieee ;;
396 esac
397
398 case "${obj_format}" in
399 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
400 esac
401
402 dnl
403 dnl Make sure the desired support files exist.
404 dnl
405
406 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
407 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
408 fi
409
410 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
411 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
412 fi
413
414 # and target makefile frag
415
416 target_frag=${srcdir}/config/${gas_target}.mt
417 if test ! -r ${target_frag}; then
418 target_frag=/dev/null # ick! but subst_file can't be conditionalized
419 fi
420 AC_SUBST_FILE(target_frag)
421
422 case ${user_bfd_gas}-${primary_bfd_gas} in
423 yes-yes | no-no)
424 # We didn't override user's choice.
425 ;;
426 no-yes)
427 AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
428 ;;
429 no-preferred)
430 primary_bfd_gas=no
431 ;;
432 *-preferred)
433 primary_bfd_gas=yes
434 ;;
435 yes-*)
436 primary_bfd_gas=yes
437 ;;
438 -*)
439 # User specified nothing.
440 ;;
441 esac
442
443 # Some COFF configurations want these random other flags set.
444 case ${obj_format} in
445 coff)
446 case ${target_cpu_type} in
447 i386) AC_DEFINE(I386COFF) ;;
448 m68k) AC_DEFINE(M68KCOFF) ;;
449 m88k) AC_DEFINE(M88KCOFF) ;;
450 esac
451 ;;
452 esac
453
454 # Getting this done right is going to be a bitch. Each configuration specified
455 # with --enable-targets=... should be checked for environment, format, cpu, and
456 # bfd_gas setting.
457 #
458 # For each configuration, the necessary object file support code must be linked
459 # in. This might be only one, it might be up to four. The necessary emulation
460 # code needs to be provided, too.
461 #
462 # And then there's "--enable-targets=all"....
463 #
464 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
465
466 formats="${obj_format}"
467 emfiles=""
468 EMULATIONS=""
469 GAS_UNIQ(emulations)
470 for em in . $emulations ; do
471 case $em in
472 .) continue ;;
473 mipsbelf | mipslelf)
474 fmt=elf file=mipself ;;
475 mipsbecoff | mipslecoff)
476 fmt=ecoff file=mipsecoff ;;
477 esac
478 formats="$formats $fmt"
479 emfiles="$emfiles e-$file.o"
480 EMULATIONS="$EMULATIONS &$em,"
481 done
482 GAS_UNIQ(formats)
483 GAS_UNIQ(emfiles)
484 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
485 for fmt in $formats ; do
486 case $fmt in
487 aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
488 bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
489 coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
490 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
491 elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
492 generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
493 hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
494 ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
495 som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
496 vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
497 esac
498 extra_objects="$extra_objects obj-$fmt.o"
499 done
500 obj_format=multi
501 fi
502 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
503 te_file=multi
504 extra_objects="$extra_objects $emfiles"
505 DEFAULT_EMULATION=`set . $emulations ; echo $2`
506 AC_DEFINE(USE_EMULATIONS)
507 fi
508 AC_SUBST(extra_objects)
509 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
510 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
511
512 files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
513 config/obj-${obj_format}.h config/obj-${obj_format}.c \
514 config/te-${te_file}.h config/atof-${atof}.c \
515 $extra_files"
516 links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
517 $extra_links"
518
519 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
520 yes-*-coff) need_bfd=yes ;;
521 no-*-coff) need_bfd=yes
522 AC_DEFINE(MANY_SEGMENTS) ;;
523 esac
524
525 reject_dev_configs=yes
526
527 case ${reject_dev_configs}-${dev} in
528 yes-yes) # Oops.
529 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
530 ;;
531 esac
532
533 AC_SUBST(target_cpu_type)
534 AC_SUBST(obj_format)
535 AC_SUBST(atof)
536 dnl AC_SUBST(emulation)
537
538 AC_LINK_FILES($files, $links)
539
540 case "${primary_bfd_gas}" in
541 yes) AC_DEFINE(BFD_ASSEMBLER)
542 need_bfd=yes ;;
543 esac
544
545 # do we need the opcodes library?
546 case "${need_opcodes}" in
547 yes)
548 OPCODES_DEP=../opcodes/libopcodes.a
549 OPCODES_LIB='-L../opcodes -lopcodes'
550
551 # We need to handle some special cases for shared libraries.
552 case "${host}" in
553 *-*-sunos*)
554 # On SunOS, we must link against the name we are going to install,
555 # not -lbfd, since SunOS does not support SONAME.
556 if test "${shared_opcodes}" = "true"; then
557 OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
558 fi
559 ;;
560 alpha*-*-osf*)
561 # On Alpha OSF/1, the native linker searches all the -L
562 # directories for any LIB.so files, and only then searches for any
563 # LIB.a files. That means that if there is an installed
564 # libbfd.so, but this build is not done with --enable-shared, the
565 # link will wind up being against the install libbfd.so rather
566 # than the newly built libbfd. To avoid this, we must explicitly
567 # link against libbfd.a when --enable-shared is not used.
568 if test "${shared_opcodes}" != "true"; then
569 OPCODES_LIB='../opcodes/libopcodes.a'
570 fi
571 ;;
572 esac
573 ;;
574 esac
575 AC_SUBST(OPCODES_DEP)
576 AC_SUBST(OPCODES_LIB)
577
578 case "${need_bfd}" in
579 yes)
580 BFDDEP=../bfd/libbfd.a
581 BFDLIB='-L../bfd -lbfd'
582 ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
583
584 # We need to handle some special cases for shared libraries
585 case "${host}" in
586 *-*-sunos*)
587 # On SunOS, we must link against the name we are going to install,
588 # not -lbfd, since SunOS does not support SONAME.
589 if test "${shared_bfd}" = "true"; then
590 BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
591 fi
592 ;;
593 alpha*-*-osf*)
594 # On Alpha OSF/1, the native linker searches all the -L
595 # directories for any LIB.so files, and only then searches for any
596 # LIB.a files. That means that if there is an installed
597 # libbfd.so, but this build is not done with --enable-shared, the
598 # link will wind up being against the install libbfd.so rather
599 # than the newly built libbfd. To avoid this, we must explicitly
600 # link against libbfd.a when --enable-shared is not used.
601 if test "${shared_bfd}" != "true"; then
602 BFDLIB='../bfd/libbfd.a'
603 fi
604 ;;
605 esac
606 ;;
607 esac
608 AC_SUBST(BFDDEP)
609 AC_SUBST(BFDLIB)
610 AC_SUBST(ALL_OBJ_DEPS)
611
612 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
613 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
614 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
615 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
616 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
617
618 AC_PROG_CC
619 AC_PROG_INSTALL
620
621 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
622
623 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
624 # people who are not cross-compiling but are compiling cross-assemblers.
625 AC_MSG_CHECKING(whether compiling a cross-assembler)
626 if test "${host}" = "${target}"; then
627 cross_gas=no
628 else
629 cross_gas=yes
630 AC_DEFINE(CROSS_COMPILE)
631 fi
632 AC_MSG_RESULT($cross_gas)
633
634 dnl ansidecl.h will deal with const
635 dnl AC_CONST
636 AC_FUNC_ALLOCA
637 AC_C_INLINE
638
639 # VMS doesn't have unlink.
640 AC_CHECK_FUNCS(unlink remove, break)
641
642 # Some systems don't have sbrk().
643 AC_CHECK_FUNCS(sbrk)
644
645 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
646 # enough, but on some of those systems, the assert macro relies on requoting
647 # working properly!
648 GAS_WORKING_ASSERT
649
650 # On some systems, the system header files may not declare malloc, realloc,
651 # and free. There are places where gas needs these functions to have been
652 # declared -- such as when taking their addresses.
653 gas_test_headers="
654 #ifdef HAVE_MEMORY_H
655 #include <memory.h>
656 #endif
657 #ifdef HAVE_STRING_H
658 #include <string.h>
659 #endif
660 #ifdef HAVE_STDLIB_H
661 #include <stdlib.h>
662 #endif
663 #ifdef HAVE_UNISTD_H
664 #include <unistd.h>
665 #endif
666 "
667 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
668 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
669
670 # Does errno.h declare errno, or do we have to add a separate declaration
671 # for it?
672 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
673 #ifdef HAVE_ERRNO_H
674 #include <errno.h>
675 #endif
676 ])
677
678 HLDFLAGS=
679 RPATH_ENVVAR=LD_LIBRARY_PATH
680 # If we have shared libraries, try to set rpath reasonably.
681 if test "${shared}" = "true"; then
682 case "${host}" in
683 *-*-hpux*)
684 HLDFLAGS='-Wl,+s,+b,$(libdir)'
685 RPATH_ENVVAR=SHLIB_PATH
686 ;;
687 *-*-irix5* | *-*-irix6*)
688 HLDFLAGS='-Wl,-rpath,$(libdir)'
689 ;;
690 *-*-linux*aout*)
691 ;;
692 *-*-linux*)
693 HLDFLAGS='-Wl,-rpath,$(libdir)'
694 ;;
695 *-*-sysv4* | *-*-solaris*)
696 HLDFLAGS='-R $(libdir)'
697 ;;
698 esac
699 fi
700
701 # On SunOS, if the linker supports the -rpath option, use it to
702 # prevent ../bfd and ../opcodes from being included in the run time
703 # search path.
704 case "${host}" in
705 *-*-sunos*)
706 echo 'main () { }' > conftest.c
707 ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
708 if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
709 :
710 elif grep 'No such file' conftest.t >/dev/null 2>&1; then
711 :
712 elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
713 :
714 elif test "${shared}" = "true"; then
715 HLDFLAGS='-Wl,-rpath=$(libdir)'
716 else
717 HLDFLAGS='-Wl,-rpath='
718 fi
719 rm -f conftest.t conftest.c conftest
720 ;;
721 esac
722 AC_SUBST(HLDFLAGS)
723 AC_SUBST(RPATH_ENVVAR)
724
725 dnl This must come last.
726 AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)