gdb/ChangeLog

   1 2011-01-24  Pedro Alves  <pedro@codesourcery.com>
   2
   3         Don't lose embedded_offset in printing routines throughout.
   4
   5         * valprint.h (val_print_array_elements): Change prototype.
   6         * valprint.c (val_print_array_elements): Add `embedded_offset'
   7         parameter, and adjust to pass it down to val_print, while passing
   8         `valaddr' or `address' unmodified.  Take embedded_offset into
   9         account when checking repetitions.
  10         * c-valprint.c (c_val_print): Pass embedded_offset to
  11         val_print_array_elements instead of adjusting `valaddr' and
  12         `address'.
  13         * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
  14         embedded_offset to val_print_array_elements instead of adjusting
  15         `valaddr'.
  16         * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
  17         * p-valprint.c (pascal_val_print): Pass embedded_offset to
  18         val_print_array_elements and pascal_object_print_value_fields
  19         instead of adjusting `valaddr'.
  20         (pascal_object_print_value_fields): Add `offset' parameter, and
  21         adjust to use it.
  22         (pascal_object_print_value): Add `offset' parameter, and adjust to
  23         use it.
  24         (pascal_object_print_static_field): Use
  25         value_contents_for_printing/value_embedded_offset, rather than
  26         value_contents.
  27         * ada-valprint.c (val_print_packed_array_elements): Add `offset'
  28         parameter, and adjust to use it.  Use
  29         value_contents_for_printing/value_embedded_offset, rather than
  30         value_contents.
  31         (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
  32         (ada_val_print_array): Add `offset' parameter, and adjust to use
  33         it.
  34         (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
  35         `embedded_offset' to `offset'.  Don't re-adjust `valaddr'.
  36         Instead work with offsets.  Use
  37         value_contents_for_printing/value_embedded_offset, rather than
  38         value_contents.  Change `defer_val_int' local type to CORE_ADDR,
  39         and use value_from_pointer to extract a target pointer, rather
  40         than value_from_longest.
  41         (print_variant_part): Add `offset' parameter.  Replace
  42         `outer_valaddr' parameter by a new `outer_offset' parameter.
  43         Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
  44         (ada_value_print): Use
  45         value_contents_for_printing/value_embedded_offset, rather than
  46         value_contents.
  47         (print_record): Add `offset' parameter, and adjust to pass it
  48         down.
  49         (print_field_values): Add `offset' parameter.  Replace
  50         `outer_valaddr' parameter by a new `outer_offset' parameter.
  51         Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
  52         Use value_contents_for_printing/value_embedded_offset, rather than
  53         value_contents.
  54         * d-valprint.c (dynamic_array_type): Use
  55         value_contents_for_printing/value_embedded_offset, rather than
  56         value_contents.
  57         * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
  58         Don't re-adjust `valaddr'.  Instead pass down adjusted offsets.
  59         (java_print_value_fields): Take `offset' into account.  Don't
  60         re-adjust `valaddr'.  Instead pass down adjusted offsets.
  61         (java_val_print): Take `embedded_offset' into account.  Pass it to
  62         java_print_value_fields.
  63         * f-valprint.c (f77_print_array_1): Add `embedded_offset'
  64         parameter.  Don't re-adjust `valaddr' or `address'.  Instead pass
  65         down adjusted offsets.
  66         (f77_print_array): Add `embedded_offset' parameter.  Pass it down.
  67         (f_val_print): Take `embedded_offset' into account.
  68
  69 2011-01-21  Joel Brobecker  <brobecker@adacore.com>
  70
  71         * inflow.c: Include "gdbcmd.h".
  72         (interactive_mode): New static global, moved here from top.c.
  73         (show_interactive_mode): New function, moved here from top.c.
  74         use gdb_has_a_terminal instead of input_from_terminal_p to
  75         determine the current mode.
  76         (gdb_has_a_terminal): Add handling of the "iteractive-mode"
  77         setting.
  78         (_initialize_inflow): Add the "set/show interactive-mode"
  79         commands.  Moved here from top.c, after having adjusted slightly
  80         the help text.
  81         * top.c (interactive_mode, show_interactive_mode): Delete, moved
  82         to inflow.c.
  83         (input_from_terminal_p): Remove handling of "interactive-mode"
  84         setting, moved to infow.c.
  85         (init_main): Remove creation of the "set/show interactive-mode"
  86         commands, moved to inflow.c.
  87
  88 2011-01-19  Joel Brobecker  <brobecker@adacore.com>
  89
  90         * NEWS: Add entry for native ia64-hpux support.
  91
  92 2011-01-19  Tom Tromey  <tromey@redhat.com>
  93
  94         PR mi/8618:
  95         * thread.c (free_thread): Free 'name'.
  96         (print_thread_info): Emit thread name.  Change CLI output.
  97         (thread_name_command): New function.
  98         (do_captured_thread_select): Emit newline.
  99         (_initialize_thread): Register 'thread name' command.
 100         * target.h (struct target_ops) <to_thread_name>: New field.
 101         (target_thread_name): New macro.
 102         * target.c (update_current_target): Handle to_thread_name.
 103         * python/py-infthread.c (thpy_get_name): New function.
 104         (thpy_set_name): Likewise.
 105         (thread_object_getset): Add "name".
 106         * linux-nat.c (linux_nat_thread_name): New function.
 107         (linux_nat_add_target): Set to_thread_name.
 108         * gdbthread.h (struct thread_info) <name>: New field.
 109
 110 2011-01-18  Joel Brobecker  <brobecker@adacore.com>
 111
 112         * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
 113         (ada_val_print_1): Likewise.
 114
 115 2011-01-18  Joel Brobecker  <brobecker@adacore.com>
 116
 117         * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
 118         upper limit address is not greater than the function end address
 119         when the upper limit could not be computed using the debugging
 120         info.
 121
 122 2011-01-17  Tom Tromey  <tromey@redhat.com>
 123
 124         * cli/cli-cmds.c (apropos_command): Free the compiled regex.  Use
 125         get_regcomp_error.
 126         * utils.c: Include gdb_regex.h.
 127         (do_regfree_cleanup): New function.
 128         (make_regfree_cleanup): Likewise.
 129         (get_regcomp_error): Likewise.
 130         * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
 131
 132 2011-01-17  Tom Tromey  <tromey@redhat.com>
 133
 134         * cli/cli-cmds.c (apropos_command): Fix formatting.  Don't call
 135         re_compile_fastmap.
 136
 137 2011-01-17  Pierre Muller  <muller@ics.u-strasbg.fr>
 138
 139         * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
 140         for internal variables.
 141         (last_was_structop): New static variable.
 142         (COMPLETE): New token.
 143         (field_exp): New rule to group all '.' suffix handling.
 144         Add mark_struct_expression calls when approriate to be able
 145         to correctly find fields for completion.
 146         (yylex): Adapt to handle field completion and set INTVAR when
 147         required.
 148
 149 2011-01-14  Yao Qi  <yao@codesourcery.com>
 150
 151         * arm-tdep.c (arm_register_reggroup_p): FPS register is in
 152         save_reggroup, restore_reggroup and all_reggroup.
 153
 154 2011-01-14  Joel Brobecker  <brobecker@adacore.com>
 155
 156         * ada-valprint. (ada_printchar): Use the correct type length
 157         in call to ada_emit_char.
 158         * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
 159
 160 2011-01-14  Pierre Muller  <muller@ics.u-strasbg.fr>
 161
 162         * solib-som.h (hpux_major_release): Declare variable here.
 163         * solib-som.c:  Remove <sys/utsname.h> header.
 164         (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
 165         (hpux_major_release): Make global, change default value to
 166         DEFAULT_HPUX_MAJOR_RELEASE.
 167         (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
 168         * hppa-hpux-nat.c: Add <sys/utsname.h> include.
 169         Add "solib-som.h" header.
 170         (set_hpux_major_release): New function.
 171         (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
 172
 173 2011-01-14  Mike Frysinger  <vapier@gentoo.org>
 174
 175         * configure.tgt (*-*-uclinux*): Match more Linux os targets
 176
 177 2011-01-14  Joel Brobecker  <brobecker@adacore.com>
 178
 179         * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
 180         new-line at end of warning message.
 181         (ia64_hpux_store_register): Remove trailing new-line at end of
 182         error message.
 183         * ia64-hpux-tdep.c: Rephrase comment.
 184         * solib-ia64-hpux.c (struct dld_info): Change type of field
 185         dld_flags from "long long" to ULONGEST.
 186
 187 2011-01-14  Pedro Alves  <pedro@codesourcery.com>
 188
 189         * target.h (deprecated_child_ops): Delete declaration.
 190         * target.c (deprecated_child_ops): Delete definition.
 191
 192 2011-01-14  Pedro Alves  <pedro@codesourcery.com>
 193
 194         * Makefile.in (hpux-thread.o): Delete rule.
 195         * configure.ac: Don't check for HPUX DCE threads support.
 196         * configure, config.in: Regenerate.
 197         * hppa-hpux-nat.c (child_suppress_run): Delete.
 198         (hppa_hpux_child_can_run): Delete.
 199         (_initialize_hppa_hpux_nat): Don't override to_can_run.
 200         * hpux-thread.c: Delete.
 201
 202 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 203
 204         * hpux-thread.c (hpux_pid_to_str): Delete.
 205
 206 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 207
 208         * ada-valprint.c (ada_emit_char): Remove strange code.
 209         Check that c is <= UCHAR_MAX before passing it to isascii.
 210         (char_at): Do not assume that TYPE_LEN is either 1 or 2.
 211
 212 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 213
 214         * top.c (input_from_terminal_p): Restrict the use of interactive_mode
 215         to the case where instream is stdin.
 216
 217 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 218
 219         * ia64-tdep.h (struct regcache): Forward declare.
 220         (struct ia64_infcall_ops): New struct type.
 221         (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
 222         and "infcall_ops".
 223         * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
 224         Renames ia64_find_global_pointer.
 225         (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
 226         (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
 227         (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
 228         methods.
 229         (ia64_infcall_ops): New static global constant.
 230         (ia64_gdbarch_init): Set tdep->infcall_ops.
 231         * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
 232         (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
 233         * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
 234         (ia64_hpux_dummy_code): New static global constant.
 235         (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
 236         (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
 237         (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
 238         New function.
 239         (ia64_hpux_infcall_ops): New static global constant.
 240         (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
 241         for inferior function calls to work properly on ia64-hpux.
 242
 243 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 244
 245         * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
 246         * ia64-tdep.h (struct frame_info): forward declaration.
 247         (struct gdbarch_tdep): Add field size_of_register_frame.
 248         * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
 249         to determine the size of the register frame.
 250         (ia64_size_of_register_frame): New function.
 251         (ia64_gdbarch_init): Set tdep->size_of_register_frame.
 252         * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
 253         (IA64_HPUX_UREG_REASON): New macro.
 254         (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
 255         New functions.
 256         (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
 257         * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
 258         (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
 259         objects.
 260
 261 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 262
 263         Add support for ia64-hpux.
 264         * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
 265         ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
 266
 267         * configure.host: Add handling for ia64-hpux hosts.  Add associated
 268         floatformats.
 269         * configure.tgt: Add handling for ia64-hpux targets.
 270         * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
 271         (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
 272         (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
 273
 274 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 275
 276         [ttrace] Compute thread list immediately after attach.
 277         * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
 278         New subprogram.
 279         (inf_ttrace_attach): Use it.
 280
 281 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 282
 283         * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
 284         if we could not determine the frame's function address.  Instead,
 285         use the frame's PC, and then continue.
 286
 287 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 288
 289         * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
 290         not already defined.
 291
 292 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 293
 294         * ia64-tdep.c (ia64_struct_type_p): New function.
 295         (ia64_extract_return_value): Handle integral values that are
 296         less than 8 bytes long.
 297         (ia64_push_dummy_call): Likewise.
 298
 299 2011-01-13  Joel Brobecker  <brobecker@adacore.com>
 300
 301         * ia64-tdep.c (floatformat_ia64_ext_little): Renames
 302         floatformat_ia64_ext.
 303         (floatformat_ia64_ext_big): New static const.
 304         (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
 305
 306 2011-01-12  Tom Tromey  <tromey@redhat.com>
 307
 308         * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
 309         messages.
 310         * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
 311         (mi_cmd_thread_list_ids): Likewise.
 312         (mi_cmd_data_list_changed_registers): Likewise.
 313         (mi_cmd_data_list_register_values): Likewise.
 314         (mi_cmd_data_write_register_values): Likewise.
 315         (mi_cmd_data_evaluate_expression): Likewise.
 316         (mi_cmd_data_read_memory): Likewise.
 317         (mi_cmd_data_read_memory_bytes): Likewise.
 318         (mi_cmd_data_write_memory): Likewise.
 319         (mi_cmd_enable_timings): Likewise.
 320         * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
 321         * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
 322         (mi_cmd_var_delete): Likewise.
 323         (mi_cmd_var_set_format): Likewise.
 324         (mi_cmd_var_show_format): Likewise.
 325         (mi_cmd_var_info_num_children): Likewise.
 326         (mi_cmd_var_list_children): Likewise.
 327         (mi_cmd_var_info_type): Likewise.
 328         (mi_cmd_var_info_expression): Likewise.
 329         (mi_cmd_var_show_attributes): Likewise.
 330         (mi_cmd_var_assign): Likewise.
 331         (mi_cmd_var_update): Likewise.
 332         (mi_cmd_enable_pretty_printing): Likewise.
 333         (mi_cmd_var_set_update_range): Likewise.
 334         * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
 335         messages.
 336         (mi_cmd_target_file_put): Likewise.
 337         (mi_cmd_target_file_delete): Likewise.
 338         * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
 339         messages.
 340         (mi_cmd_stack_info_depth): Likewise.
 341         (mi_cmd_stack_list_locals): Likewise.
 342         (mi_cmd_stack_list_args): Likewise.
 343         (mi_cmd_stack_select_frame): Likewise.
 344         (mi_cmd_stack_select_frame): Likewise.
 345         (mi_cmd_stack_info_frame): Likewise.
 346         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
 347         messages.
 348         (mi_cmd_file_list_exec_source_files): Likewise.
 349         * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
 350         (mi_cmd_env_cd): Likewise.
 351         (mi_cmd_env_path): Likewise.
 352         (mi_cmd_env_dir): Likewise.
 353         (mi_cmd_inferior_tty_show): Likewise.
 354         * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
 355         * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
 356         (mi_cmd_break_watch): Likewise.
 357
 358 2011-01-12  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 359
 360         * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
 361         (ppc_linux_insert_hw_breakpoint): Likewise.
 362         (ppc_linux_remove_hw_breakpoint): Likewise.
 363         (ppc_linux_insert_watchpoint): Likewise.
 364
 365 2011-01-12  Andrew Burgess  <aburgess@broadcom.com>
 366             Jan Kratochvil  <jan.kratochvil@redhat.com>
 367
 368         PR fortran/11104 and DWARF unbound arrays detection.
 369         * dwarf2read.c (read_subrange_type): Set zero length on unspecified
 370         upper bound.  Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
 371         unspecified upper bound.
 372         * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
 373         variables array_size_array, tmp_type and offset_item.  New variable
 374         array.  Remove call to f77_get_upperbound.  New variables array_type
 375         and index.  Call value_subscripted_rvalue for each dimenasion.  Remove
 376         the final call to deprecated_set_value_type.
 377
 378 2011-01-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
 379
 380         Make value allocations more lazy.
 381         * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
 382         instead of allocate_value and set_value_lazy when possible.
 383         * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
 384         instead of allocate_value and set_value_lazy.
 385         * findvar.c (value_of_register_lazy): Likewise.
 386         (read_var_value): Remove V preallocation, call just check_typedef in
 387         advance.  Move allocate_value to LOC_CONST, LOC_LABEL,
 388         LOC_CONST_BYTES.  Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
 389         LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK.  Set ADDR instead of
 390         set_value_address and break in LOC_BLOCK.  Use allocate_value_lazy and
 391         remove lval_memory set in LOC_REGPARM_ADDR.  Use allocate_value_lazy
 392         in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT.  Add setting lval_memory at
 393         the end, remove set_value_lazy there.
 394         * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
 395         instead of allocate_value and set_value_lazy when possible.
 396         * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
 397         * value.c (allocate_computed_value): Use allocate_value_lazy instead
 398         of allocate_value and set_value_lazy.
 399         (value_from_contents_and_address): Use allocate_value_lazy instead of
 400         allocate_value and set_value_lazy when possible.
 401
 402 2011-01-12  Andrew Burgess  <aburgess@broadcom.com>
 403
 404         * disasm.c (dump_insns): Support dumping opcodes for MI.
 405         * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
 406         dumping of instruction opcodes.
 407
 408 2011-01-09  Robert Millan  <rmh@gnu.org>  (tiny patch)
 409
 410         * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
 411         appropiately.
 412
 413 2011-01-11  Tom Tromey  <tromey@redhat.com>
 414
 415         * thread.c (do_captured_thread_select): Emit newline before
 416         printing frame.
 417
 418 2011-01-11  Michael Snyder  <msnyder@vmware.com>
 419
 420         * s390-tdep.c: Comment cleanup, mostly periods and spaces.
 421         * score-tdep.c: Ditto.
 422         * score-tdep.h: Ditto.
 423         * ser-base.c: Ditto.
 424         * ser-go32.c: Ditto.
 425         * serial.c: Ditto.
 426         * serial.h: Ditto.
 427         * ser-mingw.c: Ditto.
 428         * ser-pipe.c: Ditto.
 429         * ser-tcp.c: Ditto.
 430         * ser-unix.c: Ditto.
 431         * sh64-tdep.c: Ditto.
 432         * shnbsd-nat.c: Ditto.
 433         * sh-tdep.c: Ditto.
 434         * sh-tdep.h: Ditto.
 435         * solib.c: Ditto.
 436         * solib-darwin.c: Ditto.
 437         * solib-frv.c: Ditto.
 438         * solib.h: Ditto.
 439         * solib-irix.c: Ditto.
 440         * solib-osf.c: Ditto.
 441         * solib-pa64.c: Ditto.
 442         * solib-som.c: Ditto.
 443         * solib-spu.c: Ditto.
 444         * solib-sunos.c: Ditto.
 445         * solib-svr4.c: Ditto.
 446         * solist.h: Ditto.
 447         * sol-thread.c: Ditto.
 448         * somread.c: Ditto.
 449         * source.c: Ditto.
 450         * source.h: Ditto.
 451         * sparc64-linux-tdep.c: Ditto.
 452         * sparc64-tdep.c: Ditto.
 453         * sparc-linux-nat.c: Ditto.
 454         * sparc-linux-tdep.c: Ditto.
 455         * sparc-sol2-nat.c: Ditto.
 456         * sparc-sol2-tdep.c: Ditto.
 457         * sparc-tdep.c: Ditto.
 458         * sparc-tdep.h: Ditto.
 459         * spu-tdep.c: Ditto.
 460         * stabsread.c: Ditto.
 461         * stabsread.h: Ditto.
 462         * stack.c: Ditto.
 463         * symfile.c: Ditto.
 464         * symfile.h: Ditto.
 465         * symmisc.c: Ditto.
 466         * symtab.c: Ditto.
 467         * symtab.h: Ditto.
 468         * target.c: Ditto.
 469         * target-descriptions.c: Ditto.
 470         * target-descriptions.h: Ditto.
 471         * target.h: Ditto.
 472         * target-memory.c: Ditto.
 473         * terminal.h: Ditto.
 474         * thread.c: Ditto.
 475         * top.c: Ditto.
 476         * tracepoint.c: Ditto.
 477         * tracepoint.h: Ditto.
 478         * trad-frame.h: Ditto.
 479         * typeprint.c: Ditto.
 480
 481 2011-01-11  Michael Snyder  <msnyder@vmware.com>
 482
 483         * ui-file.c: Comment cleanup, mostly periods and spaces.
 484         * ui-file.h: Ditto.
 485         * ui-out.c: Ditto.
 486         * ui-out.h: Ditto.
 487         * utils.c: Ditto.
 488         * v850-tdep.c: Ditto.
 489         * valarith.c: Ditto.
 490         * valops.c: Ditto.
 491         * valprint.c: Ditto.
 492         * valprint.h: Ditto.
 493         * value.c: Ditto.
 494         * value.h: Ditto.
 495         * varobj.c: Ditto.
 496         * varobj.h: Ditto.
 497         * vax-tdep.c: Ditto.
 498         * vec.c: Ditto.
 499         * vec.h: Ditto.
 500         * version.h: Ditto.
 501         * windows-nat.c: Ditto.
 502         * windows-tdep.c: Ditto.
 503         * xcoffread.c: Ditto.
 504         * xcoffsolib.c: Ditto.
 505         * xml-support.c: Ditto.
 506         * xstormy16-tdep.c: Ditto.
 507         * xtensa-tdep.c: Ditto.
 508         * xtensa-tdep.h: Ditto.
 509
 510 2011-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 511
 512         * breakpoint.c (resources_needed_watchpoint): Fix indentation.
 513         * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
 514
 515 2011-01-11  Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
 516             Thiago Jung Bauermann  <bauerman@br.ibm.com>
 517
 518         Implement support for PowerPC BookE ranged watchpoints.
 519         * breakpoint.h
 520         (struct breakpoint_ops) <resources_needed>: New method.
 521         Initialize to NULL in all existing breakpoint_ops instances.
 522         (struct breakpoint) <exact>: New field.
 523         (target_exact_watchpoints): Declare external global.
 524         * breakpoint.c (target_exact_watchpoints): New global flag.
 525         (update_watchpoint): Set b->type to bp_hardware_watchpoint and
 526         b->enable_state to bp_enabled before calling
 527         hw_watchpoint_used_count.
 528         (hw_watchpoint_used_count): Iterate over all bp_locations in a
 529         watchpoint.  Call breakpoint's breakpoint_ops.resources_needed
 530         if available.
 531         (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
 532         if the watchpoint is exact.
 533         (resources_needed_watchpoint): New function.
 534         (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
 535         (watch_command_1): Set b->exact if the user asked for an exact
 536         watchpoint and one can be set.
 537         (can_use_hardware_watchpoint): Add exact_watchpoints argument.
 538         Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
 539         the user asks for an exact watchpoint and one can be set.  Return
 540         number of needed debug registers to watch the expression.
 541         * gdbtypes.c (is_scalar_type): New function, based on
 542         valprint.c:scalar_type_p.
 543         (is_scalar_type_recursive): New function.
 544         * gdbtypes.h (is_scalar_type_recursive): Declare.
 545         * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
 546         handle regions when ranged watchpoints are available.
 547         (create_watchpoint_request): New function.
 548         (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
 549         create_watchpoint_request.
 550         * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
 551         (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
 552         `set powerpc' and `show powerpc' commands.
 553         * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
 554         Mention documentation comment in the target macro.
 555         (target_region_ok_for_hw_watchpoint): Document return value.
 556
 557 2011-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 558
 559         * breakpoint.c (update_watchpoint): Decide on using a software or
 560         hardware watchpoint after the bp_locations are created.
 561
 562 2010-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 563
 564         Convert hardware watchpoints to use breakpoint_ops.
 565         * breakpoint.h (breakpoint_ops) <insert>: Rename to...
 566         <insert_location>: ... this.  Return int instead of void.
 567         Accept pointer to struct bp_location instead of pointer to
 568         struct breakpoint.  Adapt all implementations.
 569         (breakpoint_ops) <remove>: Rename to...
 570         <remove_location>: ... this.  Accept pointer to struct bp_location
 571         instead of pointer to struct breakpoint.  Adapt all implementations.
 572         * breakpoint.c (insert_catchpoint): Delete function.
 573         (insert_bp_location): Call the watchpoint or catchpoint's
 574         breakpoint_ops.insert method.
 575         (remove_breakpoint_1): Call the watchpoint or catchpoint's
 576         breakpoint_ops.remove method.
 577         (insert_watchpoint, remove_watchpoint): New functions.
 578         (watchpoint_breakpoint_ops): New structure.
 579         (watch_command_1): Initialize the OPS field.
 580         * inf-child.c (inf_child_insert_fork_catchpoint)
 581         (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
 582         (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
 583         (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
 584         Delete functions.
 585         (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
 586         to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
 587         to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
 588         to_remove_exec_catchpoint and to_set_syscall_catchpoint.
 589         * target.c (update_current_target): Change default implementation of
 590         to_insert_fork_catchpoint, to_remove_fork_catchpoint,
 591         to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
 592         to_insert_exec_catchpoint, to_remove_exec_catchpoint and
 593         to_set_syscall_catchpoint to return_one.
 594         (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
 595         (debug_to_insert_exec_catchpoint): Report return value.
 596         * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
 597         (to_insert_exec_catchpoint): Change declaration to return int instead
 598         of void.
 599
 600 2011-01-11  Michael Snyder  <msnyder@vmware.com>
 601
 602         * arm-tdep.c: Internationalization.
 603         * c-lang.c: Ditto.
 604         * charset.c: Ditto.
 605         * fork-child.c: Ditto.
 606         * nto-procfs.c: Ditto.
 607         * ppc-sysv-tdep.c: Ditto.
 608         * procfs.c: Ditto.
 609         * remote-mips.c: Ditto.
 610         * remote.c: Ditto.
 611         * rs6000-nat.c: Ditto.
 612         * rs6000-tdep.c: Ditto.
 613         * target.c: Ditto.
 614         * valops.c: Ditto.
 615         * value.c: Ditto.
 616         * xml-support.c: Ditto.
 617         * mi/mi-cmd-break.c: Ditto.
 618         * mi/mi-cmd-var.c: Ditto.
 619         * mi/mi-interp.c: Ditto.
 620         * mi/mi-main.c: Ditto.
 621
 622 2011-01-11  Andrew Burgess  <aburgess@broadcom.com>
 623
 624         * remote-sim.c (gdbsim_store_register): Update API to
 625         sim_store_register to check more error conditions.
 626
 627 2011-01-10  Michael Snyder  <msnyder@vmware.com>
 628
 629         * nto-procfs.c: Comment cleanup, mostly periods and spaces.
 630         * nto-tdep.c: Ditto.
 631         * nto-tdep.h: Ditto.
 632         * objc-exp.y: Ditto.
 633         * objc-lang.c: Ditto.
 634         * objfiles.c: Ditto.
 635         * objfiles.h: Ditto.
 636         * observer.c: Ditto.
 637         * opencl-lang.c: Ditto.
 638         * osabi.c: Ditto.
 639         * parse.c: Ditto.
 640         * parser-defs.h: Ditto.
 641         * p-exp.y: Ditto.
 642         * p-lang.c: Ditto.
 643         * posix-hdep.c: Ditto.
 644         * ppcbug-rom.c: Ditto.
 645         * ppc-linux-nat.c: Ditto.
 646         * ppc-linux-tdep.c: Ditto.
 647         * ppc-linux-tdep.h: Ditto.
 648         * ppcnbsd-tdep.c: Ditto.
 649         * ppcobsd-tdep.c: Ditto.
 650         * ppcobsd-tdep.h: Ditto.
 651         * ppc-sysv-tdep.c: Ditto.
 652         * ppc-tdep.h: Ditto.
 653         * printcmd.c: Ditto.
 654         * proc-abi.c: Ditto.
 655         * proc-flags.c: Ditto.
 656         * procfs.c: Ditto.
 657         * proc-utils.h: Ditto.
 658         * progspace.h: Ditto.
 659         * prologue-value.c: Ditto.
 660         * prologue-value.h: Ditto.
 661         * psympriv.h: Ditto.
 662         * psymtab.c: Ditto.
 663         * p-typeprint.c: Ditto.
 664         * p-valprint.c: Ditto.
 665         * ravenscar-sparc-thread.c: Ditto.
 666         * ravenscar-thread.c: Ditto.
 667         * ravenscar-thread.h: Ditto.
 668         * record.c: Ditto.
 669         * regcache.c: Ditto.
 670         * regcache.h: Ditto.
 671         * remote.c: Ditto.
 672         * remote-fileio.c: Ditto.
 673         * remote-fileio.h: Ditto.
 674         * remote.h: Ditto.
 675         * remote-m32r-sdi.c: Ditto.
 676         * remote-mips.c: Ditto.
 677         * remote-sim.c: Ditto.
 678         * rs6000-aix-tdep.c: Ditto.
 679         * rs6000-nat.c: Ditto.
 680         * rs6000-tdep.c: Ditto.
 681
 682 2011-01-10  Michael Snyder  <msnyder@vmware.com>
 683
 684         * charset.c (validate): Internationalization.
 685         * coffread.c (read_one_sym): Ditto.
 686         * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
 687         * h8300-tdep.c (H8300_extract_return_value): Ditto.
 688         * inflow.c (new_tty): Ditto.
 689         * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
 690         * m32c-tdep.c (m32c_return_value): Ditto.
 691         * mep-tdep.c (mep_store_return_value): Ditto.
 692         * score-tdep.c (score7_fetch_insn): Ditto.
 693         * ser-mingw.c (pipe_windows_open): Ditto.
 694         * sh64-tdep.c (sh64_extract_return_value): Ditto.
 695         * spu-tdep.c (spu_register_type): Ditto.
 696         * tracepoint.c (trace_find_command): Ditto.
 697         * valarith.c (value_pos): Ditto.
 698
 699 2011-01-10  Joel Brobecker  <brobecker@adacore.com>
 700
 701         * ada-valprint.c (printstr): Minor comment reformatting.
 702
 703 2011-01-08  Michael Snyder  <msnyder@vmware.com>
 704
 705         * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
 706         markup.
 707
 708 2011-01-08  Michael Snyder  <msnyder@vmware.com>
 709
 710         * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
 711         * hppa-hpux-tdep.c: Ditto.
 712         * hppa-linux-nat.c: Ditto.
 713         * hppa-linux-tdep.c: Ditto.
 714         * hppanbsd-tdep.c: Ditto.
 715         * hppa-tdep.c: Ditto.
 716         * hppa-tdep.h: Ditto.
 717         * hpux-thread.c: Ditto.
 718         * i386-cygwin-tdep.c: Ditto.
 719         * i386-darwin-nat.c: Ditto.
 720         * i386gnu-nat.c: Ditto.
 721         * i386-linux-nat.c: Ditto.
 722         * i386-linux-tdep.c: Ditto.
 723         * i386-nat.c: Ditto.
 724         * i386-nat.h: Ditto.
 725         * i386nbsd-tdep.c: Ditto.
 726         * i386-sol2-nat.c: Ditto.
 727         * i386-stub.c: Ditto.
 728         * i386-tdep.c: Ditto.
 729         * i386-tdep.h: Ditto.
 730         * i387-tdep.c: Ditto.
 731         * ia64-linux-nat.c: Ditto.
 732         * ia64-linux-tdep.c: Ditto.
 733         * ia64-tdep.c: Ditto.
 734         * infcall.c: Ditto.
 735         * infcall.h: Ditto.
 736         * infcmd.c: Ditto.
 737         * inferior.c: Ditto.
 738         * inferior.h: Ditto.
 739         * infloop.c: Ditto.
 740         * inflow.c: Ditto.
 741         * infrun.c: Ditto.
 742         * interps.c: Ditto.
 743         * interps.h: Ditto.
 744         * iq2000-tdep.c: Ditto.
 745         * irix5-nat.c: Ditto.
 746         * jit.c: Ditto.
 747         * jit.h: Ditto.
 748         * jv-exp.y: Ditto.
 749         * jv-lang.c: Ditto.
 750         * jv-lang.h: Ditto.
 751         * jv-typeprint.c: Ditto.
 752         * jv-valprint.c: Ditto.
 753         * language.c: Ditto.
 754         * language.h: Ditto.
 755         * linespec.c: Ditto.
 756         * linux-fork.c: Ditto.
 757         * linux-nat.c: Ditto.
 758         * linux-thread-db.c: Ditto.
 759         * lm32-tdep.c: Ditto.
 760
 761 2011-01-08  Michael Snyder  <msnyder@vmware.com>
 762
 763         * m2-exp.y: Comment cleanup, mostly periods and spaces.
 764         * m2-lang.c: Ditto.
 765         * m2-typeprint.c: Ditto.
 766         * m2-valprint.c: Ditto.
 767         * m32c-tdep.c: Ditto.
 768         * m32r-linux-nat.c: Ditto.
 769         * m32r-rom.c: Ditto.
 770         * m32r-tdep.c: Ditto.
 771         * m32r-tdep.h: Ditto.
 772         * m68hc11-tdep.c: Ditto.
 773         * m58klinux-nat.c: Ditto.
 774         * m68k-tdep.c: Ditto.
 775         * m88k-tdep.c: Ditto.
 776         * m88k-tdep.h: Ditto.
 777         * machoread.c: Ditto.
 778         * macrocmd.c: Ditto.
 779         * macroexp.c: Ditto.
 780         * macrotab.c: Ditto.
 781         * main.c: Ditto.
 782         * maint.c: Ditto.
 783         * mdebugread.c: Ditto.
 784         * mdebugread.h: Ditto.
 785         * memattr.c: Ditto.
 786         * memattr.h: Ditto.
 787         * memory-map.h: Ditto.
 788         * mep-tdep.c: Ditto.
 789         * microblaze-rom.c: Ditto.
 790         * microblaze-tdep.c: Ditto.
 791         * minsyms.c: Ditto.
 792         * mips-irix-tdep.c: Ditto.
 793         * mips-linux-nat.c: Ditto.
 794         * mips-linux-tdep.c: Ditto.
 795         * mips-linux-tdep.h: Ditto.
 796         * mipsnbsd-nat.c: Ditto.
 797         * mipsnbsd-tdep.c: Ditto.
 798         * mipsread.c: Ditto.
 799         * mips-tdep.c: Ditto.
 800         * mips-tdep.h: Ditto.
 801         * mn10300-linux-tdep.c: Ditto.
 802         * mn10300-tdep.c: Ditto.
 803         * mn10300-tdep.h: Ditto.
 804         * monitor.c: Ditto.
 805         * monitor.h: Ditto.
 806         * moxie-tdep.c: Ditto.
 807         * moxie-tdep.h: Ditto.
 808         * mt-tdep.c: Ditto.
 809
 810 2011-01-08  Mike Frysinger  <vapier@gentoo.org>
 811
 812         * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
 813
 814 2011-01-08  Robert Millan  <rmh@gnu.org>
 815
 816         * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
 817
 818 2011-01-07  Michael Snyder  <msnyder@vmware.com>
 819
 820         * charset.c (_initialize_charset): Fix typo in string.
 821
 822 2011-01-07  Michael Snyder  <msnyder@vmware.com>
 823
 824         * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
 825         for i18n.
 826         * tui/tui-layout.c (tui_set_layout_for_display_command):
 827         Split line so that operator goes to beginning of line.
 828         * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
 829         assignment out of if statement.
 830
 831 2011-01-07  Michael Snyder  <msnyder@vmware.com>
 832
 833         * ada-lang.c: Comment cleanup, mostly periods and spaces.
 834         * ada-lang.h: Ditto.
 835         * ada-tasks.c: Ditto.
 836         * ada-valprint.c: Ditto.
 837         * aix-threads.c: Ditto.
 838         * alpha-linux-nat.c: Ditto.
 839         * alpha-linux-tdep.c: Ditto.
 840         * alpha-mdebug-tdep.c: Ditto.
 841         * alpha-nat.c: Ditto.
 842         * alpha-osf1-tdep.c: Ditto.
 843         * alpha-tdep.c: Ditto.
 844         * alphabsd-nat.c: Ditto.
 845         * alphabsd-tdep.c: Ditto.
 846         * amd64-darwin-tdep.c: Ditto.
 847         * amd64-linux-nat.c: Ditto.
 848         * amd64-linux-tdep.c: Ditto.
 849         * amd64-sol2-tdep.c: Ditto.
 850         * amd64-tdep.c: Ditto.
 851         * amd64-fbsd-tdep.c: Ditto.
 852         * amd64-nbsd-tdep.c: Ditto.
 853         * amd64-obsd-tdep.c: Ditto.
 854         * amd64-linux-nat.c: Ditto.
 855         * amd64-linux-tdep.c: Ditto.
 856         * arm-tdep.c: Ditto.
 857         * arm-tdep.h: Ditto.
 858         * armnbsd-nat.c: Ditto.
 859         * avr-tdep.c: Ditto.
 860         * bfin-tdep.c: Ditto.
 861         * bsd-kvm.c: Ditto.
 862         * c-typeprintc: Ditto.
 863         * c-valprint.c: Ditto.
 864         * coff-pe-read.h: Ditto.
 865         * coffreead.c: Ditto.
 866         * cris-tdep.c: Ditto.
 867         * d-lang.c: Ditto.
 868         * darwin-nat-info.c: Ditto.
 869         * darwin-nat.c: Ditto.
 870         * dbug-rom.c: Ditto.
 871         * dbxread.c: Ditto.
 872         * dcache.c: Ditto.
 873         * dcache.h: Ditto.
 874         * dec-thread.c: Ditto.
 875         * defs.h: Ditto.
 876         * demangle.c: Ditto.
 877         * dicos-tdep.c: Ditto.
 878         * dictionary.c: Ditto.
 879         * dictionary.h: Ditto.
 880         * dink32-rom.c: Ditto.
 881         * disasm.c: Ditto.
 882         * doublest.c: Ditto.
 883         * dsrec.c: Ditto.
 884         * dummy-frame.c: Ditto.
 885         * dwarf2-frame.c: Ditto.
 886         * dwarf2expr.c: Ditto.
 887         * dwarf2loc.c: Ditto.
 888         * dwarf2read.c: Ditto.
 889         * elfread.c: Ditto.
 890         * environ.c: Ditto.
 891         * eval.c: Ditto.
 892         * event-top.h: Ditto.
 893         * exceptions.c: Ditto.
 894         * exceptions.h: Ditto.
 895         * exec.c: Ditto.
 896         * expprint.c: Ditto.
 897         * expression.h: Ditto.
 898         * f-exp.y: Ditto.
 899         * f-lang.c: Ditto.
 900         * f-lang.h: Ditto.
 901         * f-typeprint.c: Ditto.
 902         * f-valprint.c: Ditto.
 903         * fbsd-nat.c: Ditto.
 904         * findvar.c: Ditto.
 905         * fork-child.c: Ditto.
 906         * frame.c: Ditto.
 907         * frame.h: Ditto.
 908         * frv-linux-tdep.c: Ditto.
 909         * frv-tdep.c: Ditto.
 910         * gcore.c: Ditto.
 911         * gdb-stabs.h: Ditto.
 912         * gdb_assert.h: Ditto.
 913         * gdb_string.h: Ditto.
 914         * gdb_thread_db.h: Ditto.
 915         * gdb_wait.h: Ditto.
 916         * gdbarch.sh: Ditto.
 917         * gdbcore.h: Ditto.
 918         * gdbthread.h: Ditto.
 919         * gdbtypes.c: Ditto.
 920         * gdbtypes.h: Ditto.
 921         * gnu-nat.c: Ditto.
 922         * gnu-nat.h: Ditto.
 923         * gnu-v2-abi.c: Ditto.
 924         * gnu-v3-abi.c: Ditto.
 925         * go32-nat.c: Ditto.
 926         * gdbarch.c: Regenerate.
 927         * gdbarch.h: Regenerate.
 928
 929 2011-01-07  Michael Snyder  <msnyder@vmware.com>
 930
 931         * ax-gdb.c: Adjust some long output strings.
 932         * breakpoint.c: Ditto.
 933         * charset.c: Ditto.
 934         * cp-abi.c: Ditto.
 935         * infcall.c: Ditto.
 936         * infrun.c: Ditto.
 937         * linux-nat.c: Ditto.
 938         * solib-pa64.c: Ditto.
 939         * solib-som.c: Ditto.
 940
 941 2011-01-06  Tom Tromey  <tromey@redhat.com>
 942
 943         PR python/12367:
 944         * NEWS: Add item.
 945         * python/python.c (GdbMethods): Add "newest_frame" method.
 946         * python/python-internal.h (gdbpy_newest_frame): Declare.
 947         * python/py-frame.c (gdbpy_newest_frame): New function.
 948
 949 2010-01-06  Paul Pluzhnikov  <ppluzhnikov@google.com>
 950
 951         * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
 952         * jit.c (jit_debug): New variable.
 953         (show_jit_debug): New function.
 954         (struct target_buffer): Use ULONGEST.
 955         (bfd_open_from_target_memory): Likewise.
 956         (jit_register_code, jit_inferior_init): Add debug output.
 957         (_initialize_jit): Register "debug jit" command.
 958
 959 2011-01-06  Tom Tromey  <tromey@redhat.com>
 960
 961         * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
 962         * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
 963         and ARCH_FRAME.
 964
 965 2011-01-06  Tom Tromey  <tromey@redhat.com>
 966
 967         * python/py-frame.c (frapy_block): Use get_frame_block.
 968
 969 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
 970
 971         Do not stop on SIGPRIO signals by default
 972         * infrun.c (_initialize_infrun): Unset signal_stop and
 973         signal_print for TARGET_SIGNAL_PRIO.
 974
 975 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
 976
 977         * ada-tasks.c: Fix style violation in comment.
 978
 979 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
 980
 981         * linespec.c (decode_compound, find_method): Remove trailing \n
 982         at end of error string.
 983         * solib-irix.c (irix_current_sos): Likewise.
 984         * varobj.c (uninstall_variable): Likewise.
 985
 986 2011-01-06  Joel Brobecker  <brobecker@adacore.com>
 987
 988         * copyright.py: New script.
 989         * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
 990         Launch emacs without exec'ing. Call copyright.py afterwards.
 991
 992 2011-01-05  Michael Snyder  <msnyder@vmware.com>
 993
 994         * addrmap.c: Shorten lines of >= 80 columns.
 995         * arch-utils.c: Ditto.
 996         * arch-utils.h: Ditto.
 997         * ax-gdb.c: Ditto.
 998         * ax-general.c: Ditto.
 999         * bcache.c: Ditto.
1000         * blockframe.c: Ditto.
1001         * breakpoint.c: Ditto.
1002         * buildsym.c: Ditto.
1003         * c-lang.c: Ditto.
1004         * c-typeprint.c: Ditto.
1005         * charset.c: Ditto.
1006         * coffread.c: Ditto.
1007         * command.h: Ditto.
1008         * corelow.c: Ditto.
1009         * cp-abi.c: Ditto.
1010         * cp-namespace.c: Ditto.
1011         * cp-support.c: Ditto.
1012         * dbug-rom.c: Ditto.
1013         * dbxread.c: Ditto.
1014         * defs.h: Ditto.
1015         * dfp.c: Ditto.
1016         * dfp.h: Ditto.
1017         * dictionary.c: Ditto.
1018         * disasm.c: Ditto.
1019         * doublest.c: Ditto.
1020         * dwarf2-frame.c: Ditto.
1021         * dwarf2expr.c: Ditto.
1022         * dwarf2loc.c: Ditto.
1023         * dwarf2read.c: Ditto.
1024         * elfread.c: Ditto.
1025         * eval.c: Ditto.
1026         * event-loop.c: Ditto.
1027         * event-loop.h: Ditto.
1028         * exceptions.h: Ditto.
1029         * exec.c: Ditto.
1030         * expprint.c: Ditto.
1031         * expression.h: Ditto.
1032         * f-lang.c: Ditto.
1033         * f-valprint.c: Ditto.
1034         * findcmd.c: Ditto.
1035         * frame-base.c: Ditto.
1036         * frame-unwind.c: Ditto.
1037         * frame-unwind.h: Ditto.
1038         * frame.c: Ditto.
1039         * frame.h: Ditto.
1040         * gcore.c: Ditto.
1041         * gdb-stabs.h: Ditto.
1042         * gdb_assert.h: Ditto.
1043         * gdb_dirent.h: Ditto.
1044         * gdb_obstack.h: Ditto.
1045         * gdbcore.h: Ditto.
1046         * gdbtypes.c: Ditto.
1047         * gdbtypes.h: Ditto.
1048         * inf-ttrace.c: Ditto.
1049         * infcall.c: Ditto.
1050         * infcmd.c: Ditto.
1051         * inflow.c: Ditto.
1052         * infrun.c: Ditto.
1053         * inline-frame.h: Ditto.
1054         * language.c: Ditto.
1055         * language.h: Ditto.
1056         * libunwind-frame.c: Ditto.
1057         * libunwind-frame.h: Ditto.
1058         * linespec.c: Ditto.
1059         * linux-nat.c: Ditto.
1060         * linux-nat.h: Ditto.
1061         * linux-thread-db.c: Ditto.
1062         * machoread.c: Ditto.
1063         * macroexp.c: Ditto.
1064         * macrotab.c: Ditto.
1065         * main.c: Ditto.
1066         * maint.c: Ditto.
1067         * mdebugread.c: Ditto.
1068         * memattr.c: Ditto.
1069         * minsyms.c: Ditto.
1070         * monitor.c: Ditto.
1071         * monitor.h: Ditto.
1072         * objfiles.c: Ditto.
1073         * objfiles.h: Ditto.
1074         * osabi.c: Ditto.
1075         * p-typeprint.c: Ditto.
1076         * p-valprint.c: Ditto.
1077         * parse.c: Ditto.
1078         * printcmd.c: Ditto.
1079         * proc-events.c: Ditto.
1080         * procfs.c: Ditto.
1081         * progspace.c: Ditto.
1082         * progspace.h: Ditto.
1083         * psympriv.h: Ditto.
1084         * psymtab.c: Ditto.
1085         * record.c: Ditto.
1086         * regcache.c: Ditto.
1087         * regcache.h: Ditto.
1088         * remote-fileio.c: Ditto.
1089         * remote.c: Ditto.
1090         * ser-mingw.c: Ditto.
1091         * ser-tcp.c: Ditto.
1092         * ser-unix.c: Ditto.
1093         * serial.c: Ditto.
1094         * serial.h: Ditto.
1095         * solib-frv.c: Ditto.
1096         * solib-irix.c: Ditto.
1097         * solib-osf.c: Ditto.
1098         * solib-pa64.c: Ditto.
1099         * solib-som.c: Ditto.
1100         * solib-sunos.c: Ditto.
1101         * solib-svr4.c: Ditto.
1102         * solib-target.c: Ditto.
1103         * solib.c: Ditto.
1104         * somread.c: Ditto.
1105         * source.c: Ditto.
1106         * stabsread.c: Ditto.
1107         * stabsread.c: Ditto.
1108         * stack.c: Ditto.
1109         * stack.h: Ditto.
1110         * symfile-mem.c: Ditto.
1111         * symfile.c: Ditto.
1112         * symfile.h: Ditto.
1113         * symmisc.c: Ditto.
1114         * symtab.c: Ditto.
1115         * symtab.h: Ditto.
1116         * target-descriptions.c: Ditto.
1117         * target-memory.c: Ditto.
1118         * target.c: Ditto.
1119         * target.h: Ditto.
1120         * terminal.h: Ditto.
1121         * thread.c: Ditto.
1122         * top.c: Ditto.
1123         * tracepoint.c: Ditto.
1124         * tracepoint.h: Ditto.
1125         * ui-file.c: Ditto.
1126         * ui-file.h: Ditto.
1127         * ui-out.h: Ditto.
1128         * user-regs.c: Ditto.
1129         * user-regs.h: Ditto.
1130         * utils.c: Ditto.
1131         * valarith.c: Ditto.
1132         * valops.c: Ditto.
1133         * valprint.c: Ditto.
1134         * valprint.h: Ditto.
1135         * value.c: Ditto.
1136         * varobj.c: Ditto.
1137         * varobj.h: Ditto.
1138         * vec.h: Ditto.
1139         * xcoffread.c: Ditto.
1140         * xcoffsolib.c: Ditto.
1141         * xcoffsolib.h: Ditto.
1142         * xml-syscall.c: Ditto.
1143         * xml-tdesc.c: Ditto.
1144
1145 2011-01-05  Michael Snyder  <msnyder@vmware.com>
1146
1147         * cli/cli-cmds.c: Shorten lines of >= 80 columns.
1148         * cli/cli-decode.c: Ditto.
1149         * cli/cli-dump.c: Ditto.
1150         * cli/cli-logging.c: Ditto.
1151         * cli/cli-script.c: Ditto.
1152         * cli/cli-setshow.c: Ditto.
1153         * common/signals.c: Ditto.
1154         * mi/mi-cmd-break.c: Ditto.
1155         * mi/mi-cmd-disas.c: Ditto.
1156         * mi/mi-cmd-stack.c: Ditto.
1157         * mi/mi-cmd-var.c: Ditto.
1158         * mi/mi-cmds.c: Ditto.
1159         * mi/mi-common.h: Ditto.
1160         * mi/mi-console.c: Ditto.
1161         * mi/mi-interp.c: Ditto.
1162         * mi/mi-main.c: Ditto.
1163         * osf-share/cma_attr.c: Ditto.
1164         * osf-share/cma_deb_core.h: Ditto.
1165         * osf-share/cma_debug_client.h: Ditto.
1166         * osf-share/cma_handle.h: Ditto.
1167         * osf-share/cma_mutex.h: Ditto.
1168         * osf-share/cma_stack_int.h: Ditto.
1169         * osf-share/cma_tcb_defs.h: Ditto.
1170         * python/py-auto-load.c: Ditto.
1171         * python/py-breakpoint.c: Ditto.
1172         * python/py-cmd.c: Ditto.
1173         * python/py-frame.c: Ditto.
1174         * python/py-objfile.c: Ditto.
1175         * python/py-param.c: Ditto.
1176         * python/py-progspace.c: Ditto.
1177         * python/py-symbol.c: Ditto.
1178         * python/py-value.c: Ditto.
1179         * python/python-internal.h: Ditto.
1180         * python/python.c: Ditto.
1181         * tui/tui-data.c: Ditto.
1182         * tui/tui-disasm.c: Ditto.
1183         * tui/tui-hooks.c: Ditto.
1184         * tui/tui-io.c: Ditto.
1185         * tui/tui-layout.c: Ditto.
1186         * tui/tui-regs.c: Ditto.
1187         * tui/tui-source.c: Ditto.
1188         * tui/tui-stack.c: Ditto.
1189         * tui/tui-win.c: Ditto.
1190         * tui/tui-windata.c: Ditto.
1191         * tui/tui-winsource.c: Ditto.
1192
1193 2011-01-05  Joel Brobecker  <brobecker@adacore.com>
1194
1195         * configure.ac, gdb.1: Copyright year update.
1196
1197 2011-01-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
1198
1199         * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
1200         this_pc_in_block, morestack_msym and morestack_name.  Check for
1201         "__morestack" minimal symbol there.
1202
1203 2011-01-03  Joel Brobecker  <brobecker@adacore.com>
1204
1205         * symfile.c (find_sym_fns): Add call to dont_repeat.
1206
1207 2011-01-01  Joel Brobecker  <brobecker@adacore.com>
1208
1209         Copyright year update in most files (performed by copyright.sh).
1210
1211 2011-01-01  Joel Brobecker  <brobecker@adacore.com>
1212
1213         * top.c (print_gdb_version): Update copyright year in version output.
1214
1215 For older changes see ChangeLog-2010.
1216 \f
1217 Local Variables:
1218 mode: change-log
1219 left-margin: 8
1220 fill-column: 74
1221 version-control: never
1222 coding: utf-8
1223 End: