gdb/Makefile.in

   1 #Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
   2
   3 # This file is part of GDB.
   4
   5 # This program is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18
  19 prefix = /usr/local
  20
  21 program_transform_name =
  22 exec_prefix = $(prefix)
  23 bindir = $(exec_prefix)/bin
  24 libdir = $(exec_prefix)/lib
  25 tooldir = $(libdir)/$(target_alias)
  26
  27 datadir = $(prefix)/lib
  28 mandir = $(prefix)/man
  29 man1dir = $(mandir)/man1
  30 man2dir = $(mandir)/man2
  31 man3dir = $(mandir)/man3
  32 man4dir = $(mandir)/man4
  33 man5dir = $(mandir)/man5
  34 man6dir = $(mandir)/man6
  35 man7dir = $(mandir)/man7
  36 man8dir = $(mandir)/man8
  37 man9dir = $(mandir)/man9
  38 infodir = $(prefix)/info
  39 includedir = $(prefix)/include
  40 docdir = $(datadir)/doc
  41
  42 SHELL = /bin/sh
  43
  44 INSTALL = install -c
  45 INSTALL_PROGRAM = $(INSTALL)
  46 INSTALL_DATA = $(INSTALL)
  47
  48 AR = ar
  49 AR_FLAGS = qv
  50 RANLIB = ranlib
  51
  52 # Flags that describe where you can find the termcap library.
  53 # This can be overridden in the host Makefile fragment file.
  54 TERMCAP = -ltermcap
  55
  56 # System V: If you compile gdb with a compiler which uses the coff
  57 # encapsulation feature (this is a function of the compiler used, NOT
  58 # of the m-?.h file selected by config.gdb), you must make sure that
  59 # the GNU nm is the one that is used by munch.
  60
  61 # If you are compiling with GCC, make sure that either 1) You use the
  62 # -traditional flag, or 2) You have the fixed include files where GCC
  63 # can reach them.  Otherwise the ioctl calls in inflow.c
  64 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  65 # distribution will fix your include files up.
  66 #CC=cc
  67 #CC=gcc -traditional
  68 GCC=gcc
  69
  70 # Directory containing source files.  Don't clean up the spacing,
  71 # this exact string is matched for by the "configure" script.
  72 srcdir = .
  73
  74 # It is also possible that you will need to add -I/usr/include/sys to the
  75 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
  76 # is where it should be according to Posix).
  77
  78 # If you use bison instead of yacc, it needs to include the "-y" argument.
  79 #BISON="bison -y"
  80 BISON=yacc
  81 YACC=$(BISON)
  82
  83 # where to find texinfo; GDB dist should include a recent one
  84 TEXIDIR=${srcdir}/../texinfo
  85
  86 # where to find makeinfo, preferably one designed for texinfo-2
  87 MAKEINFO=makeinfo
  88
  89 # Set this up with gcc if you have gnu ld and the loader will print out
  90 # line numbers for undefinded refs.
  91 #CC-LD=gcc -static
  92 CC-LD=${CC}
  93
  94 # Where is the "include" directory?  Traditionally ../include or ./include
  95 INCLUDE_DIR =  ${srcdir}/../include
  96 INCLUDE_DEP = $$(INCLUDE_DIR)
  97
  98 # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
  99 # or ./mmalloc  (When we want the binary library built from it, we use
 100 # ${MMALLOC_DIR}${subdir}.)
 101 # Note that mmalloc can still be used on systems without mmap().
 102 # To use your system malloc, comment out the following defines.
 103 MMALLOC_DIR = ${srcdir}/../mmalloc
 104 MMALLOC_DEP = $$(MMALLOC_DIR)
 105 MMALLOC_LIB = ./../mmalloc${subdir}/libmmalloc.a
 106 # To use your system malloc, uncomment MMALLOC_DISABLE.
 107 #MMALLOC_DISABLE = -DNO_MMALLOC
 108 # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
 109 #MMALLOC_CHECK = -DNO_MMALLOC_CHECK
 110 MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
 111
 112 # Where is the source dir for the BFD library?  Traditionally ../bfd or ./bfd
 113 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
 114 BFD_DIR =  ${srcdir}/../bfd
 115 BFD_DEP = $$(BFD_DIR)
 116 BFD_LIB = ./../bfd${subdir}/libbfd.a
 117
 118 # Where is the source dir for the READLINE library?  Traditionally in .. or .
 119 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
 120 READLINE_DIR = ${srcdir}/../readline
 121 READLINE_DEP = $$(READLINE_DIR)
 122 RL_LIB = ./../readline${subdir}/libreadline.a
 123
 124 # All the includes used for CFLAGS and for lint.
 125 # -I. for config files.
 126 # -I${srcdir} possibly for regex.h also.
 127 # -I${srcdir}/config for more generic config files.
 128 INCLUDE_CFLAGS = -I. -I${srcdir} -I${srcdir}/config -I$(INCLUDE_DIR) -I$(BFD_DIR) -I$(READLINE_DIR)
 129
 130 # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
 131 # from the config/ directory.
 132 GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS}
 133 #PROFILE_CFLAGS = -pg
 134
 135 # CFLAGS is specifically reserved for setting from the command line
 136 # when running make.  I.E.  "make USER_CFLAGS=-Wmissing-prototypes".
 137 CFLAGS = -g
 138 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
 139 INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
 140 # None of the things in CFLAGS will do any harm, and on some systems
 141 #  (e.g. SunOS4) it is important to use the MH_CFLAGS.
 142 LDFLAGS = $(CFLAGS)
 143
 144 # Where is the "-liberty" library, containing getopt and obstack?
 145 LIBIBERTY_DIR = ${srcdir}/../libiberty
 146 LIBIBERTY = ./../libiberty${subdir}/libiberty.a
 147
 148 # Where is the "-lopcodes" library, with (some of) the opcode tables and
 149 # disassemblers?
 150 OPCODES = ./../opcodes${subdir}/libopcodes.a
 151
 152 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
 153 # If your sysyem is missing alloca(), or, more likely, it's there but
 154 # it doesn't work, define ALLOCA & ALLOCA1 too.
 155
 156 # Libraries and corresponding dependencies for compiling gdb.
 157 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 158 # TERMCAP comes after readline, since readline depends on it.
 159 CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} \
 160         ${LIBIBERTY} ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
 161 CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
 162         ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
 163
 164 ADD_FILES = ${REGEX} ${ALLOCA}  ${XM_ADD_FILES} ${TM_ADD_FILES} \
 165         ${NAT_ADD_FILES}
 166 ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} \
 167         ${NAT_ADD_FILES}
 168
 169 VERSION = 4.8.5
 170 DIST=gdb
 171
 172 LINT=/usr/5bin/lint
 173 LINTFLAGS= -I${BFD_DIR}
 174
 175 RUNTEST=runtest
 176 RUNTESTFLAGS=
 177
 178 # Host and target-dependent makefile fragments come in here.
 179 ####
 180 # End of host and target-dependent makefile fragments
 181
 182 FLAGS_TO_PASS = \
 183         "prefix=$(prefix)" \
 184         "exec_prefix=$(exec_prefix)" \
 185         "against=$(against)" \
 186         "AR=$(AR)" \
 187         "AR_FLAGS=$(AR_FLAGS)" \
 188         "CC=$(CC)" \
 189         "CFLAGS=$(CFLAGS)" \
 190         "CHILLFLAGS=$(CHILLFLAGS)" \
 191         "CHILL=$(CHILL)" \
 192         "CHILL_LIB=$(CHILL_LIB)" \
 193         "CXX=$(CXX)" \
 194         "CXXFLAGS=$(CXXFLAGS)" \
 195         "RANLIB=$(RANLIB)" \
 196         "MAKEINFO=$(MAKEINFO)" \
 197         "INSTALL=$(INSTALL)" \
 198         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 199         "INSTALL_DATA=$(INSTALL_DATA)" \
 200         "RUNTEST=$(RUNTEST)" \
 201         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 202         "BISON=$(BISON)"
 203
 204 # Flags that we pass when building the testsuite.
 205
 206 CC_FOR_TARGET = ` \
 207   if [ -f $${rootme}/../gcc/Makefile ] ; then \
 208     echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 209   else \
 210     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 211       echo $(CC); \
 212     else \
 213       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 214     fi; \
 215   fi`
 216
 217 CXX = gcc
 218
 219 CXX_FOR_TARGET = ` \
 220   if [ -f $${rootme}/../gcc/Makefile ] ; then \
 221     echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 222   else \
 223     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 224       echo $(CXX); \
 225     else \
 226       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 227     fi; \
 228   fi`
 229
 230 CHILLFLAGS = $(CFLAGS)
 231 CHILL = gcc
 232 CHILL_FOR_TARGET = ` \
 233   if [ -f $${rootme}/../gcc/Makefile ] ; then \
 234     echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../chillrt/; \
 235   else \
 236     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 237       echo $(CC); \
 238     else \
 239       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 240     fi; \
 241   fi`
 242 CHILL_LIB = -lchill
 243
 244 # The use of $$(x_FOR_TARGET) reduces the command line length by not
 245 # duplicating the lengthy definition.
 246 TARGET_FLAGS_TO_PASS = \
 247         "prefix=$(prefix)" \
 248         "exec_prefix=$(exec_prefix)" \
 249         "against=$(against)" \
 250         'CC=$$(CC_FOR_TARGET)' \
 251         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 252         "CFLAGS=$(CFLAGS)" \
 253         "CHILLFLAGS=$(CHILLFLAGS)" \
 254         'CHILL=$$(CHILL_FOR_TARGET)' \
 255         "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
 256         "CHILL_LIB=$(CHILL_LIB)" \
 257         'CXX=$$(CXX_FOR_TARGET)' \
 258         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 259         "CXXFLAGS=$(CXXFLAGS)" \
 260         "MAKEINFO=$(MAKEINFO)" \
 261         "INSTALL=$(INSTALL)" \
 262         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 263         "INSTALL_DATA=$(INSTALL_DATA)" \
 264         "RUNTEST=$(RUNTEST)" \
 265         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 266         "BISON=$(BISON)"
 267
 268 # All source files that go into linking GDB.
 269 # Source files which are included via a config/*/* Makefile fragment should
 270 # *not* be specified here; they're in "ALLDEPFILES".
 271 # Neither should links made at configuration time be specified here, since
 272 # SFILES is used in building the distribution archive.
 273
 274 SFILES = ${srcdir}/blockframe.c ${srcdir}/breakpoint.c ${srcdir}/buildsym.c \
 275   ${srcdir}/c-exp.y ${srcdir}/c-lang.c ${srcdir}/c-typeprint.c \
 276   ${srcdir}/c-valprint.c ${srcdir}/ch-exp.y ${srcdir}/ch-lang.c \
 277   ${srcdir}/ch-typeprint.c ${srcdir}/ch-valprint.c ${srcdir}/coffread.c \
 278   ${srcdir}/command.c ${srcdir}/complaints.c ${srcdir}/core.c \
 279   ${srcdir}/cp-valprint.c ${srcdir}/dbxread.c ${srcdir}/demangle.c \
 280   ${srcdir}/dwarfread.c ${srcdir}/elfread.c ${srcdir}/environ.c \
 281   ${srcdir}/eval.c ${srcdir}/expprint.c ${srcdir}/findvar.c \
 282   ${srcdir}/gdbtypes.c \
 283   ${srcdir}/infcmd.c ${srcdir}/inflow.c ${srcdir}/infrun.c \
 284   ${srcdir}/language.c ${srcdir}/putenv.c ${srcdir}/m2-exp.y \
 285   ${srcdir}/m2-lang.c ${srcdir}/m2-typeprint.c \
 286   ${srcdir}/m2-valprint.c ${srcdir}/main.c ${srcdir}/maint.c \
 287   ${srcdir}/mem-break.c ${srcdir}/minsyms.c ${srcdir}/mipsread.c \
 288   ${srcdir}/objfiles.c ${srcdir}/parse.c ${srcdir}/printcmd.c \
 289   ${srcdir}/remote.c ${srcdir}/source.c ${srcdir}/stabsread.c \
 290   ${srcdir}/stack.c \
 291   ${srcdir}/symfile.c ${srcdir}/symmisc.c ${srcdir}/symtab.c \
 292   ${srcdir}/target.c ${srcdir}/typeprint.c ${srcdir}/utils.c \
 293   ${srcdir}/valarith.c \
 294   ${srcdir}/valops.c ${srcdir}/valprint.c ${srcdir}/values.c \
 295   ${srcdir}/serial.c ${srcdir}/ser-go32.c ${srcdir}/ser-unix.c
 296
 297 # Files that are not source code, but need to go into gdb-$(VERSION).tar.Z.
 298 NONSRC = ${srcdir}/Makefile.in ${srcdir}/depend ${srcdir}/alldeps.mak \
 299         ${srcdir}/munch ${srcdir}/configure.in \
 300         ${srcdir}/ChangeLog ${srcdir}/ChangeLog-9091 ${srcdir}/ChangeLog-3.x \
 301         ${srcdir}/gdb.1 ${srcdir}/refcard.ps ${srcdir}/README ${srcdir}/TODO \
 302         TAGS ${srcdir}/NEWS ${srcdir}/Projects ${srcdir}/.gdbinit \
 303         ${srcdir}/COPYING $(YYFILES) ${srcdir}/copying.c \
 304         ${srcdir}/copying.awk \
 305         ${srcdir}/saber.suppress ${srcdir}/standalone.c ${srcdir}/stuff.c \
 306         ${srcdir}/kdb-start.c ${srcdir}/gcc.patch \
 307         ${srcdir}/nindy-share/Makefile ${srcdir}/nindy-share/VERSION \
 308         ${srcdir}/nindy-share/README ${srcdir}/vx-share/README \
 309         ${srcdir}/29k-share/README \
 310         ${srcdir}/config/convex/Convex.notes
 311
 312 # All source files that lint should look at
 313 LINTFILES = $(SFILES) $(YYFILES) init.c
 314
 315 # Any additional files specified on these lines should also be added to
 316 # the NONSRC definition, so they go in the tar files.
 317 SFILES_STAND = $(SFILES) standalone.c
 318 SFILES_KGDB  = $(SFILES) stuff.c kdb-start.c
 319
 320 # Header files that are not named in config/*/* Makefile fragments go here.
 321 HFILES = ${srcdir}/breakpoint.h ${srcdir}/buildsym.h ${srcdir}/call-cmds.h \
 322         ${srcdir}/command.h ${srcdir}/defs.h ${srcdir}/environ.h \
 323         ${srcdir}/expression.h ${srcdir}/frame.h ${srcdir}/gdbcmd.h \
 324         ${srcdir}/gdbcore.h ${srcdir}/gdbtypes.h ${srcdir}/gdb-stabs.h \
 325         ${srcdir}/inferior.h ${srcdir}/language.h ${srcdir}/minimon.h \
 326         ${srcdir}/objfiles.h ${srcdir}/parser-defs.h \
 327         ${srcdir}/partial-stab.h ${srcdir}/serial.h ${srcdir}/signals.h \
 328         ${srcdir}/solib.h ${srcdir}/symfile.h ${srcdir}/symtab.h \
 329         ${srcdir}/stabsread.h ${srcdir}/target.h ${srcdir}/terminal.h \
 330         ${srcdir}/typeprint.h ${srcdir}/xcoffsolib.h ${srcdir}/value.h \
 331         ${srcdir}/c-lang.h ${srcdir}/ch-lang.h ${srcdir}/m2-lang.h \
 332         ${srcdir}/complaints.h ${srcdir}/ns32k-opcode.h ${srcdir}/valprint.h \
 333         ${srcdir}/config/m68k/tm-m68k.h ${srcdir}/config/pa/tm-hppa.h \
 334         ${srcdir}/config/i960/tm-i960.h ${srcdir}/config/sparc/tm-sparc.h \
 335         ${srcdir}/config/tm-sunos.h \
 336         ${srcdir}/config/tm-sysv4.h ${srcdir}/config/m68k/xm-m68k.h \
 337         ${srcdir}/config/sparc/xm-sparc.h \
 338         ${srcdir}/config/xm-sysv4.h ${srcdir}/config/vax/xm-vax.h \
 339         ${srcdir}/config/nm-trash.h ${srcdir}/29k-share/udi/udiids.h \
 340         ${srcdir}/29k-share/udi/udiphcfg.h ${srcdir}/29k-share/udi/udiphsun.h \
 341         ${srcdir}/29k-share/udi/udiproc.h ${srcdir}/29k-share/udi/udipt29k.h \
 342         ${srcdir}/29k-share/udi/udiptcfg.h ${srcdir}/29k-share/udi/udisoc.h \
 343         ${srcdir}/29k-share/udi_soc ${srcdir}/nindy-share/b.out.h \
 344         ${srcdir}/nindy-share/block_io.h ${srcdir}/nindy-share/coff.h \
 345         ${srcdir}/nindy-share/demux.h ${srcdir}/nindy-share/env.h \
 346         ${srcdir}/nindy-share/stop.h ${srcdir}/nindy-share/ttycntl.h \
 347         ${srcdir}/vx-share/dbgRpcLib.h ${srcdir}/vx-share/ptrace.h \
 348         ${srcdir}/vx-share/vxTypes.h ${srcdir}/vx-share/vxWorks.h \
 349         ${srcdir}/vx-share/wait.h ${srcdir}/vx-share/xdr_ld.h \
 350         ${srcdir}/vx-share/xdr_ptrace.h ${srcdir}/vx-share/xdr_rdb.h
 351
 352 # GDB "info" files, which should be included in their entirety
 353 INFOFILES = gdb.info*
 354
 355 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
 356
 357 POSSLIBS = ${srcdir}/regex.c ${srcdir}/regex.h ${srcdir}/alloca.c
 358
 359 TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
 360
 361 # Subdirectories of gdb, which should be included in their entirety in
 362 # gdb-xxx.tar.Z:
 363 TARDIRS = doc sparclite # tests
 364
 365 DEPFILES = ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES}
 366
 367 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES)
 368 TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS}
 369
 370 TARFILES = ${SFILES} ${HFILES} ${NONSRC} ${ALLDEPFILES} $(ALLCONFIG) \
 371         $(ALLPARAM) $(INFOFILES) ${POSSLIBS} ${REMOTE_EXAMPLES}
 372
 373 OBS = version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
 374     values.o eval.o valops.o valarith.o valprint.o printcmd.o \
 375     symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
 376     command.o utils.o expprint.o environ.o gdbtypes.o \
 377     copying.o $(DEPFILES) mem-break.o target.o \
 378     putenv.o parse.o language.o $(YYOBJ) \
 379     buildsym.o objfiles.o minsyms.o maint.o demangle.o \
 380     dbxread.o coffread.o elfread.o dwarfread.o mipsread.o \
 381     stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \
 382     typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
 383     c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o \
 384     serial.o ser-hardwire.o
 385
 386 RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
 387
 388 TSOBS = inflow.o
 389
 390 NTSOBS = standalone.o
 391
 392 TSSTART = /lib/crt0.o
 393
 394 NTSSTART = kdb-start.o
 395
 396 SUBDIRS = doc testsuite
 397
 398 # For now, shortcut the "configure GDB for fewer languages" stuff.
 399 YYFILES = c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
 400 YYOBJ = c-exp.tab.o m2-exp.tab.o ch-exp.tab.o
 401
 402 # Prevent Sun make from putting in the machine type.  Setting
 403 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
 404 .c.o:
 405         ${CC} -c ${INTERNAL_CFLAGS} $<
 406
 407 all: gdb
 408         @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
 409
 410 installcheck:
 411 check: force
 412         @rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=check DODIRS=testsuite subdir_do
 413 info dvi: force
 414         @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
 415 install-info: force
 416         @$(MAKE) $(FLAGS_TO_PASS) DO=install-info "DODIRS=$(SUBDIRS)" subdir_do
 417 clean-info: force
 418         @$(MAKE) $(FLAGS_TO_PASS) DO=clean-info "DODIRS=$(SUBDIRS)" subdir_do
 419
 420 gdb.z:gdb.1
 421         nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
 422         pack gdb.t ; rm -f gdb.t
 423         mv gdb.t.z gdb.z
 424
 425 install: gdb
 426         -parent=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \
 427         if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
 428         -if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; fi
 429         -parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
 430         if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
 431         -if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; fi
 432         -n=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \
 433         $(INSTALL_PROGRAM) gdb $(bindir)/$$n; \
 434         $(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$n.1
 435         $(M_INSTALL)
 436         @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
 437
 438 init.c: $(srcdir)/munch $(OBS) $(TSOBS)
 439         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
 440
 441 gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
 442         ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdb \
 443           init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
 444
 445 saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
 446         #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
 447         #load ./init.c $(SFILES)
 448         #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y
 449         #unload ${srcdir}/vx-share/*.h
 450         #unload ${srcdir}/nindy-share/[A-Z]*
 451         #load c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
 452         #load copying.c version.c
 453         #load ../opcodes/libopcodes.a
 454         #load ../libiberty/libiberty.a
 455         #load ../bfd/libbfd.a
 456         #load ../readline/libreadline.a
 457         #load ../mmalloc/libmmalloc.a
 458         #load -ltermcap
 459         #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
 460         echo "Load .c corresponding to:" $(DEPFILES)
 461
 462
 463 # This is useful when debugging GDB, because some Unix's don't let you run GDB
 464 # on itself without copying the executable.  So "make gdb1" will make
 465 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
 466 # Removing gdb1 before the copy is the right thing if gdb1 is open
 467 # in another process.
 468 gdb1: gdb
 469         rm -f gdb1
 470         cp gdb gdb1
 471
 472 # This is a remote stub which runs under unix and starts up an
 473 # inferior process.  This is at least useful for debugging GDB's
 474 # remote support.
 475 rapp: $(RAPP_OBS)
 476         rm -f rapp_init.c
 477         ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
 478         ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
 479
 480 # Support for building Makefile out of configured pieces, automatically
 481 # generated dependencies, etc.  alldeps.mak is a file that contains
 482 # "make" variable definitions for all ALLDEPFILES, ALLPARAM, and ALLCONFIG,
 483 # all cadged from the current contents of the config subtree.
 484
 485 alldeps.mak: force
 486         rm -f alldeps.mak alldeps*.tmp allparam*.tmp allconfig*.tmp
 487         for i in `(cd ${srcdir}; find config -name '*.m[ht]' -print)` ; do \
 488           echo $$i >>allconfig.tmp; \
 489           awk <${srcdir}/$$i ' \
 490             $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \
 491               || $$1 == "NATDEPFILES=" { \
 492               for (i = 2; i <= NF; i++) \
 493                 print $$i >> "alldeps.tmp" ; \
 494             } \
 495             $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE=" { \
 496               print $$2 >> "allparam.tmp" }' ; \
 497         done
 498         sort <alldeps.tmp | uniq | \
 499           sed -e 's/arm-convert.o/arm-convert.s/' \
 500               -e 's!^Onindy.o!nindy-share/Onindy.c!' \
 501               -e 's!^nindy.o!nindy-share/nindy.c!' \
 502               -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
 503               -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
 504               -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
 505               -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
 506               -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
 507               -e 's!udr.o!29k-share/udi/udr.c!' \
 508               -e 's!udip2soc.o!29k-share/udi/udip2soc.c!' \
 509               -e '/..\/sim\//d' \
 510               -e '/..\/opcodes\//d' \
 511               -e 's/\.o/.c/' \
 512             >alldeps2.tmp
 513         for i in `cat allparam.tmp` ; do \
 514           (cd ${srcdir} ; \
 515           find config -name $$i -print ) >>allparam2.tmp ; \
 516         done
 517         echo '# Start of "alldeps.mak" definitions' >>alldeps.mak;
 518         sort <alldeps2.tmp | uniq | awk 'BEGIN {printf "ALLDEPFILES="} \
 519           NR == 0 {printf "$${srcdir}/" $$0;} \
 520           NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \
 521           END {printf "\n\n"}' >>alldeps.mak;
 522         sort <allparam2.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
 523           NR == 0 {printf "$${srcdir}/" $$0;} \
 524           NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \
 525           END {printf "\n\n"}' >>alldeps.mak;
 526         sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
 527           NR == 0 {printf "$${srcdir}/" $$0;} \
 528           NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \
 529           END {printf "\n\n"}' >>alldeps.mak;
 530         echo '# End of "alldeps.mak" definitions' >>alldeps.mak;
 531         rm -f alldeps*.tmp allparam*.tmp allconfig*.tmp
 532
 533 # The sed script makes everything which depends on {x,t}m.h depend on
 534 # config.status as well, in case someone reconfigures gdb out from
 535 # under an already compiled gdb.
 536 depend: $(SOURCES) Makefile.in
 537         @echo Ignore errors about non-existent system-supplied include files
 538         @echo for systems other than the one you are using.
 539         @echo Also ignore any errors in arm-convert.s.
 540         -$(GCC) -MM -nostdinc -I/usr/include $(INTERNAL_CFLAGS) \
 541           `ls $(SOURCES) | grep -v '\.[hy]$$' | \
 542           sort -u` >depend.tmp
 543 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
 544 # for xm.h, tm.h and nm.h.  This allows the same "depend" file to be used
 545 # by the various subdirectories.
 546         if [ "${srcdir}" = "." ] ; then \
 547           <depend.tmp sed \
 548             -e 's; ./xm.h; xm.h;g'  \
 549             -e 's; ./tm.h; tm.h;g'  \
 550             -e 's; ./nm.h; nm.h;g'  \
 551             -e 's; \./; $${srcdir}/;g'  \
 552             -e 's; vx-share/; $${srcdir}/vx-share/;g'  \
 553             -e 's; nindy-share/; $${srcdir}/nindy-share/;g'  \
 554             -e 's; 29k-share/; $${srcdir}/29k-share/;g'  \
 555             >depend.tm2; \
 556           rm depend.tmp; \
 557           mv depend.tm2 depend.tmp; \
 558         fi
 559         <depend.tmp sed \
 560           -e 's; [xt]m.h;& config.status;g'  \
 561           -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g'  \
 562           -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g'  \
 563           -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g'  \
 564           -e 's; ./xm.h; xm.h config.status;g'  \
 565           -e 's; ./tm.h; tm.h config.status;g'  \
 566           -e 's; ./nm.h; nm.h config.status;g'  \
 567           >depend.tm3;
 568 # OK, get your sed manual out.  This script makes all the rules in
 569 # depend explicitly state the rule, rather than relying on VPATH
 570 # or a .c.o implicit rule.  This is needed for Sun make, and should
 571 # be portable to any make worthy of the name.  I suspect that we no
 572 # longer need to set VPATH.
 573         <depend.tm3 sed \
 574           -e '/:/h' \
 575           -e '/\\$$/b end' \
 576           -e 'p' \
 577           -e 'g' \
 578           -e 's/.*:\(.*\.c\).*/ $${CC} -c $${INTERNAL_CFLAGS} \1/' \
 579           -e ': end' \
 580           >depend.tm4;
 581         mv depend.tm4 depend
 582         rm depend.tm?
 583
 584 config.status:
 585         @echo "You must configure gdb.  Look at the README file for details."
 586         @false
 587
 588 # This checks the configure.in file versus the config/ directory.
 589 config-check: config-check-hosts config-check-targets
 590 config-check-hosts:
 591         grep gdb_host= ${srcdir}/configure.in | \
 592                 sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o
 593         (cd ${srcdir}/config; ls *.mh) >HOSTdir.o
 594         diff -u HOSTconf.o HOSTdir.o
 595
 596 config-check-targets:
 597         grep gdb_target= ${srcdir}/configure.in | \
 598                 sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o
 599         (cd ${srcdir}/config; ls *.mt) >TARGdir.o
 600         diff -u HOSTconf.o HOSTdir.o
 601
 602 # These are not generated by "make depend" because they only are there
 603 # for some machines.
 604 # But these rules don't do what we want; we want to hack the foo.o: tm.h
 605 # dependency to do the right thing.
 606 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-m68k.h
 607 tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-m68k.h
 608 xm-news1000.h: xm-news.h
 609 xm-i386-sv32.h: xm-i386.h
 610 tm-i386gas.h: tm-i386.h
 611 xm-sun4os4.h: xm-sparc.h
 612 tm-sun4os4.h: tm-sparc.h
 613 xm-vaxult.h: xm-vax.h
 614 xm-vaxbsd.h: xm-vax.h
 615
 616 kdb:    $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
 617         rm -f init.c
 618         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
 619         $(CC) $(LDFLAGS) -c init.c $(CLIBS)
 620         ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
 621           -lc $(CLIBS)
 622
 623 # Put the proper machine-specific files first, so M-. on a machine
 624 # specific routine gets the one for the correct machine.
 625 # The xyzzy stuff below deals with empty DEPFILES
 626 TAGS:   ${TAGFILES}
 627         etags `find ${srcdir}/config -name $(TM_FILE) -print` \
 628           `find ${srcdir}/config -name ${XM_FILE} -print` \
 629           `find ${srcdir}/config -name ${NAT_FILE} -print` \
 630           `for i in yzzy ${DEPFILES}; do \
 631              if [ x$$i != xyzzy ]; then \
 632                echo ${srcdir}/$$i | sed -e 's/\.o$$/\.c/' ; \
 633              fi; \
 634            done` \
 635           ${TAGFILES}
 636 tags: TAGS
 637
 638 # Making distributions of GDB and friends.
 639
 640 # Make a tar file containing the GDB directory of the distribution.
 641 gdb.tar.Z: force_update
 642         $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
 643         $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z
 644
 645 # Make a directory `proto-gdb.dir' that contains an image of the GDB
 646 # directory of the distribution, built up with symlinks.  Note that this
 647 # make target is not directly referenced by any other rules in this makefile,
 648 # it is referenced by the makefile in the parent directory.
 649 make-proto-gdb.dir: force_update
 650         $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
 651         $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
 652
 653 # Set up the GDB source directory for distribution, by building all files that
 654 # are products of other files.
 655 setup-to-dist: update-depend force_update
 656         ../configure none
 657         (cd doc; $(MAKE) $(MFLAGS) GDBvn.texi)
 658         $(MAKE) $(MFLAGS) gdb.info
 659         $(MAKE) $(MFLAGS) refcard.ps
 660
 661 # Update the "depend" and "alldeps.mak" files in a source directory.
 662 # We update alldeps.mak first, since it is used to generate the list
 663 # of files to be checked for dependencies.
 664 update-depend: update-alldeps force_update
 665         ../configure none -norecursion
 666         rm -f depend
 667         $(MAKE) $(MFLAGS) depend
 668
 669 # Update the "alldeps.mak" file in a source directory.
 670 update-alldeps: force_update
 671         ../configure none -norecursion
 672         rm -f alldeps.mak
 673         $(MAKE) $(MFLAGS) alldeps.mak
 674
 675 # Build a tar file from a proto-gdb.dir.
 676 gdb-$(VERSION).tar.Z: force_update
 677         rm -f gdb.tar gdb-$(VERSION).tar.Z
 678         $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
 679         ln -s proto-gdb.dir $(DIST)
 680         tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z
 681         rm -rf $(DIST) proto-gdb.dir
 682
 683 # Build a proto-gdb.dir after GDB has been set up for distribution.
 684 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
 685 # built in the setup-to-dist process, since it defines things like ALLCONFIG
 686 # and ALLDEPFILES, that we need.
 687 make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info
 688         rm -rf proto-gdb.dir
 689         mkdir proto-gdb.dir
 690         rootme=`pwd`/ ; export rootme ; \
 691           for i in `echo ${TARDIRS}`; do \
 692             (cd proto-gdb.dir ; \
 693             mkdir -p $$i; \
 694             cd $$i; \
 695             ln -s $${rootme}/$$i/* .; \
 696             rm -rf SCCS CVS CVS.adm RCS config.status; \
 697             if test -f Makefile.in; then rm Makefile; else true; fi;); \
 698           done ; \
 699           for i in `echo ${TARFILES}`; do \
 700             (cd proto-gdb.dir ; \
 701             dir=`dirname $$i`; \
 702             if test -d $$dir; then true; else mkdir -p $$dir; fi; \
 703             ln -s $${rootme}/$$i $$i;); \
 704           done
 705         chmod og=u `find . -print`
 706
 707 # Build a proto-testsuite.dir.
 708 make-proto-testsuite.dir: force_update
 709         rm -rf proto-testsuite.dir
 710         mkdir proto-testsuite.dir
 711         rootme=`pwd`/ ; export rootme ; \
 712           for i in `find testsuite -type f -print`; do \
 713             (cd proto-testsuite.dir ; \
 714             dir=`dirname $$i`; \
 715             if test -d $$dir; then true; else mkdir -p $$dir; fi; \
 716             ln -s $${rootme}/$$i $$i;); \
 717           done
 718         find proto-testsuite.dir -name Makefile -exec rm {} \;
 719         find proto-testsuite.dir -name config.status -exec rm {} \;
 720
 721 clean:
 722         @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
 723         rm -f *.o ${ADD_FILES} *~
 724         rm -f init.c version.c
 725         rm -f gdb core make.log
 726         rm -f gdb[0-9]
 727
 728 distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
 729         @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do
 730         rm -f tm.h xm.h config.status
 731         rm -f y.output yacc.acts yacc.tmp
 732         rm -f ${TESTS} Makefile depend
 733
 734 realclean: clean
 735         @$(MAKE) $(FLAGS_TO_PASS) DO=realclean "DODIRS=$(SUBDIRS)" subdir_do
 736         rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
 737         rm -f tm.h xm.h config.status
 738         rm -f Makefile depend
 739
 740 STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
 741
 742 subdir_do: force
 743         @for i in $(DODIRS); do \
 744                 if [ -d ./$$i ] ; then \
 745                         if (cd ./$$i; \
 746                                 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
 747                         else exit 1 ; fi ; \
 748                 else true ; fi ; \
 749         done
 750
 751 Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
 752         $(SHELL) ./config.status
 753
 754 force:
 755
 756 # Documentation!
 757 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
 758 refcard.dvi:
 759         ( cd ./doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS) )
 760         mv ./doc/refcard.dvi .
 761
 762 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
 763 refcard.ps:
 764         ( cd ./doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS) )
 765         mv ./doc/refcard.ps .
 766
 767 # GDB MANUAL: TeX dvi file
 768 gdb.dvi:
 769         ( cd ./doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS) )
 770         mv ./doc/gdb.dvi .
 771
 772 # GDB MANUAL: info file
 773 gdb.info:
 774         ( cd ./doc; $(MAKE) gdb.info $(FLAGS_TO_PASS) )
 775         mv ./doc/gdb.info* .
 776
 777 # Make copying.c from COPYING
 778 copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk
 779         awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c
 780
 781 version.c: Makefile
 782         echo 'char *version = "$(VERSION)";' >version.c
 783
 784 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
 785 # in srcdir, then compiled in target dir to c-exp.tab.o.
 786 # ././c-exp.tab.c is so the command argument will never match $(srcdir)/c-exp.y
 787 # (some "makes" rewrite the VPATH into command arguments if they match deps).
 788 # Remove bogus decls for malloc/realloc/free which conflict with everything
 789 # else.
 790 c-exp.tab.o: c-exp.tab.c
 791 c-exp.tab.c: $(srcdir)/c-exp.y $(srcdir)/Makefile.in
 792         @echo 'Expect 4 shift/reduce conflicts.'
 793         ${YACC} ${YFLAGS} $(srcdir)/c-exp.y
 794         -sed -e '/extern.*malloc/d' \
 795              -e '/extern.*realloc/d' \
 796              -e '/extern.*free/d' \
 797              -e '/include.*malloc.h/d' \
 798              -e 's/malloc/xmalloc/g' \
 799              -e 's/realloc/xrealloc/g' \
 800           < y.tab.c > ././c-exp.tab.c
 801         -rm y.tab.c
 802
 803 # ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist
 804 # in srcdir, then compiled in target dir to ch-exp.tab.o.
 805 # Remove bogus decls for malloc/realloc/free which conflict with everything
 806 # else.
 807 ch-exp.tab.o: ch-exp.tab.c
 808 ch-exp.tab.c: $(srcdir)/ch-exp.y $(srcdir)/Makefile.in
 809         ${YACC} ${YFLAGS} $(srcdir)/ch-exp.y
 810         -sed -e '/extern.*malloc/d' \
 811              -e '/extern.*realloc/d' \
 812              -e '/extern.*free/d' \
 813              -e '/include.*malloc.h/d' \
 814              -e 's/malloc/xmalloc/g' \
 815              -e 's/realloc/xrealloc/g' \
 816           < y.tab.c > ././ch-exp.tab.c
 817         -rm y.tab.c
 818
 819 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
 820 # in srcdir, then compiled in target dir to m2-exp.tab.o.
 821 # Remove bogus decls for malloc/realloc/free which conflict with everything
 822 # else.
 823 m2-exp.tab.o: m2-exp.tab.c
 824 m2-exp.tab.c: $(srcdir)/m2-exp.y $(srcdir)/Makefile.in
 825         ${YACC} ${YFLAGS} $(srcdir)/m2-exp.y
 826         -sed -e '/extern.*malloc/d' \
 827              -e '/extern.*realloc/d' \
 828              -e '/extern.*free/d' \
 829              -e '/include.*malloc.h/d' \
 830              -e 's/malloc/xmalloc/g' \
 831              -e 's/realloc/xrealloc/g' \
 832           < y.tab.c > ././m2-exp.tab.c
 833         -rm y.tab.c
 834
 835 # Used on HP-PA native.
 836 # This rule fails to get automatically generated in depend because gcc -MM
 837 # ends up trying to include ../bfd/sysdep.h, which does not exist in an
 838 # unconfigured BFD directory, and the resulting error suppresses the
 839 # output of dependency information.  For now, just punt.  (FIXME)
 840 paread.o: ${srcdir}/paread.c
 841         ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/paread.c
 842
 843 lint: $(LINTFILES)
 844         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
 845            `echo ${DEPFILES} | sed 's/\.o /\.c /g'
 846
 847 gdb.cxref: $(SFILES)
 848         cxref -I. $(SFILES) >gdb.cxref
 849
 850 force_update:
 851
 852 # GNU Make has an annoying habit of putting *all* the Makefile variables
 853 # into the environment, unless you include this target as a circumvention.
 854 # Rumor is that this will be fixed (and this target can be removed)
 855 # in GNU Make 4.0.
 856 .NOEXPORT:
 857
 858 # GNU Make 3.63 has a different problem: it keeps tacking command line
 859 # overrides onto the definition of $(MAKE).  This variable setting
 860 # will remove them.
 861 MAKEOVERRIDES=
 862
 863 ## This is ugly, but I don't want GNU make to put these variables in
 864 ## the environment.  Older makes will see this as a set of targets
 865 ## with no dependencies and no actions.
 866 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
 867
 868 # This is the end of "Makefile.in".  When built into "Makefile"
 869 # by the configure script, two things are added below this point:
 870 #       alldeps.mak -- definitions of all files that are used in
 871 #                       host- or target-dependent configurations
 872 #       depend -- what .o files depend on what .c and .h files,
 873 #                       for all configurations.