1 ##Copyright (C) 1991, 1992, 1999 Free Software Foundation, Inc.
3 # Makefile for GDB documentation.
4 # This file is part of GDB.
6 # This program is free software; you can redistribute it and/or modify
7 # it under the terms of the GNU General Public License as published by
8 # the Free Software Foundation; either version 2 of the License, or
9 # (at your option) any later version.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 # GNU General Public License for more details.
16 # You should have received a copy of the GNU General Public License
17 # along with this program; if not, write to the Free Software
18 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
26 htmldir
= $(prefix)/html
31 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
32 INSTALL_DATA
= @INSTALL_DATA@
34 # main GDB source directory
37 # where to find texinfo; GDB dist should include a recent one
38 TEXIDIR
=${gdbdir}/..
/texinfo
40 # where to find makeinfo, preferably one designed for texinfo-2
44 MAKEHTMLFLAGS
= -glossary
-menu
-split_chapter
46 # where to find texi2roff, ditto
49 # Where is the source dir for the READLINE library doc?
50 # Traditionally readline is in .. or .
51 READLINE_DIR
= ${gdbdir}/..
/readline
/doc
53 SET_TEXINPUTS
= TEXINPUTS
=${TEXIDIR}:.
:$(srcdir):$(READLINE_DIR
):$$TEXINPUTS
55 # There may be alternate predefined collections of switches to configure
56 # the GDB manual. Normally this is not done in synch with the software
57 # config system, since this choice tends to be independent; most people
58 # want a doc config of `all' for a generic manual, regardless of sw config.
61 # This list of sed edits will edit the GDB reference card
62 # for what fonts and what papersize to use.
63 # By default (NO edits applied), the refcard uses:
64 # - Computer Modern (CM) fonts
65 # - US letter paper (8.5x11in)
66 # List some of the following files for alternative fonts and paper:
67 # a4rc.sed use A4 paper (297 x 210 mm)
68 # psrc.sed use PostScript fonts (Karl Berry short TeX names)
69 # lpsrc.sed use PostScript fonts (full PostScript names in TeX)
70 # e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed
71 # for A4, CM fonts: REFEDITS = a4rc.sed
72 # for US, PS fonts: REFEDITS = psrc.sed
76 # Don Knuth's TeX formatter
79 # auxiliary program for sorting Texinfo indices
82 # Program to generate Postscript files from DVI files.
85 # Main GDB manual's source files
86 SFILES_INCLUDED
= gdb-cfg.texi
$(srcdir)/remote.texi
88 SFILES_LOCAL
= $(srcdir)/gdb.texinfo GDBvn.texi
$(SFILES_INCLUDED
)
90 SFILES_DOC
= $(SFILES_LOCAL
) \
91 $(READLINE_DIR
)/rluser.texinfo
$(READLINE_DIR
)/inc-hist.texinfo
93 #### Host, target, and site specific Makefile fragments come in here.
98 info: gdb.
info gdbint.
info stabs.
info
99 dvi: gdb.
dvi gdbint.
dvi stabs.
dvi refcard.
dvi
100 ps
: gdb.ps gdbint.ps stabs.ps refcard.ps
101 html
: gdb_toc.html gdbint_toc.html stabs_toc.html
105 for i in
*.
info* ; do \
106 $(INSTALL_DATA
) $$i $(infodir)/$$i ; \
110 for i in
*.html
; do \
111 $(INSTALL_DATA
) $$i $(htmldir
)/$$i ; \
114 STAGESTUFF
= *.
info* gdb-all.texi GDBvn.texi
*.ps
*.
dvi
116 # Copy the object files from a particular stage into a subdirectory.
119 -mv
$(STAGESTUFF
) stage1
123 -mv
$(STAGESTUFF
) stage2
127 -mv
$(STAGESTUFF
) stage3
132 for i in
$(STAGESTUFF
) ; do cmp
$$i $(against
)/$$i ; done
135 -(cd stage1
; mv
-f
* ..
)
139 -(cd stage2
; mv
-f
* ..
)
143 -(cd stage3
; mv
-f
* ..
)
146 # The "least clean" level of cleaning. Get rid of files which are
147 # automatically generated files that are just intermediate files,
150 rm -f gdb.mm gdb.ms gdb.me links2roff
151 rm -f
*.aux
*.cp
* *.fn
* *.ky
* *.log
*.pg
* *.toc
*.tp
* *.vr
*
152 rm -f sedref.
dvi sedref.
tex tmp.sed
155 rm -f rluser.texinfo inc-hist.texinfo gdb-cfg.texi
158 rm -f Makefile config.status
160 # GDBvn.texi, the dvi files, the info files, and the postscript files,
161 # are all part of the distribution, so it should not be removed by
162 # "clean" or "distclean". Use maintainer-clean to remove them.
164 maintainer-clean
realclean: distclean
165 rm -f GDBvn.texi
*.
info* *.
dvi *.ps
*.html
167 # GDB QUICK REFERENCE (dvi output)
168 refcard.
dvi : refcard.
tex $(REFEDITS
)
169 if
[ -z
"$(REFEDITS)" ]; then \
170 cp
$(srcdir)/refcard.
tex sedref.
tex ; \
173 for f in
"$(REFEDITS)" ; do \
174 cat
$(srcdir)/$$f >>tmp.sed
; done
; \
175 sed
-f tmp.sed
$(srcdir)/refcard.
tex >sedref.
tex ; \
177 $(SET_TEXINPUTS
) $(TEX
) sedref.
tex
178 mv sedref.
dvi refcard.
dvi
179 rm -f sedref.log sedref.
tex tmp.sed
181 refcard.ps
: refcard.
dvi
182 $(DVIPS
) -t landscape
-o
$@
$?
184 # File to record current GDB version number (copied from main dir Makefile.in)
185 GDBvn.texi
: ${gdbdir}/Makefile.in
186 echo
"@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/^VERSION *= *//p'`" > .
/GDBvn.new
187 mv GDBvn.new GDBvn.texi
190 .PRECIOUS
: GDBvn.texi
192 # Choose configuration for GDB manual (normally `all'; normally not tied into
193 # `configure' script because most users prefer generic version of manual,
194 # not one for their binary config---which may not be specifically
196 gdb-cfg.texi
: ${srcdir}/${DOC_CONFIG}-cfg.texi
197 ln
-s
${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
198 ln
${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
199 cp
${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
201 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
202 # If your texinfo or makeinfo don't support these, get a new texinfo release
204 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
205 # Note that we can *generate* GDBvn.texi, but since we distribute one in the
206 # source directory for the benefit of people who *don't* use this makefile,
207 # VPATH will often tell make not to bother building it, because the one
208 # in the srcdir is up to date. (if not, then make should build one here).
210 # GDB MANUAL: TeX dvi file
211 gdb.
dvi: ${SFILES_DOC}
212 if
[ ! -f .
/GDBvn.texi
]; then \
213 ln
-s
$(srcdir)/GDBvn.texi . || \
214 ln
$(srcdir)/GDBvn.texi . || \
215 cp
$(srcdir)/GDBvn.texi .
; else true
; fi
216 $(SET_TEXINPUTS
) $(TEX
) gdb.texinfo
217 $(SET_TEXINPUTS
) $(TEX
) gdb.texinfo
219 $(SET_TEXINPUTS
) $(TEX
) gdb.texinfo
220 rm -f gdb.aux gdb.cp
* gdb.fn
* gdb.ky
* gdb.log gdb.pg
* gdb.toc \
226 # GDB MANUAL: info file
227 # We're using texinfo2, and older makeinfo's may not be able to
228 # cope with all the markup.
229 gdb.
info: ${SFILES_DOC}
230 $(MAKEINFO
) -I
${READLINE_DIR} -I
$(srcdir) -o .
/gdb.
info gdb.texinfo
232 # GDB MANUAL: roff translations
233 # Try to use a recent texi2roff. v2 was put on prep in jan91.
234 # If you want an index, see texi2roff doc for postprocessing
235 # and add -i to texi2roff invocations below.
236 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
237 # corresponding -e lines when later texi2roff's are current)
238 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
239 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
240 # + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
241 # + @alphaenumerate is ridiculously new, turned into @enumerate
243 # texi2roff doesn't have a notion of include dirs, so we have to fake
244 # it out for gdb manual's include files---but only if not configured
246 links2roff
: $(SFILES_INCLUDED
)
247 if
[ ! -f gdb.texinfo
]; then \
248 ln
-s
$(SFILES_INCLUDED
) . || \
249 ln
$(SFILES_INCLUDED
) . || \
250 cp
$(SFILES_INCLUDED
) .
; \
254 # "Readline" appendices. Get them also due to lack of includes,
255 # regardless of whether or not configuring in main sourcedir.
256 # @ftable removed due to bug in texi2roff-2; if your texi2roff
257 # is newer, try just ln or cp
258 rluser.texinfo
: ${READLINE_DIR}/rluser.texinfo
259 sed
-e
's/^@ftable/@table/g' \
260 -e
's/^@end ftable/@end table/g' \
261 ${READLINE_DIR}/rluser.texinfo
> .
/rluser.texinfo
263 inc-hist.texinfo
: ${READLINE_DIR}/inc-hist.texinfo
264 ln
-s
${READLINE_DIR}/inc-hist.texinfo . || \
265 ln
${READLINE_DIR}/inc-hist.texinfo . || \
266 cp
${READLINE_DIR}/inc-hist.texinfo .
268 # gdb manual suitable for [gtn]roff -me
269 gdb.me
: $(SFILES_LOCAL
) links2roff rluser.texinfo inc-hist.texinfo
270 sed
-e
'/\\input texinfo/d' \
271 -e
'/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
272 -e
'/^@ifinfo/,/^@end ifinfo/d' \
276 -e
's/^@alphaenumerate/@enumerate/g' \
277 -e
's/^@end alphaenumerate/@end enumerate/g' \
278 $(srcdir)/gdb.texinfo | \
280 sed
-e
's/---/\\(em/g' \
283 # gdb manual suitable for [gtn]roff -ms
284 gdb.ms
: $(SFILES_LOCAL
) links2roff rluser.texinfo inc-hist.texinfo
285 sed
-e
'/\\input texinfo/d' \
286 -e
'/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
287 -e
'/^@ifinfo/,/^@end ifinfo/d' \
291 -e
's/^@alphaenumerate/@enumerate/g' \
292 -e
's/^@end alphaenumerate/@end enumerate/g' \
293 $(srcdir)/gdb.texinfo | \
295 sed
-e
's/---/\\(em/g' \
298 # gdb manual suitable for [tn]roff -mm
299 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
300 # try leaving them in
301 gdb.mm
: $(SFILES_LOCAL
) links2roff rluser.texinfo inc-hist.texinfo
302 sed
-e
'/\\input texinfo/d' \
303 -e
'/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
304 -e
'/^@ifinfo/,/^@end ifinfo/d' \
309 -e
's/^@alphaenumerate/@enumerate/g' \
310 -e
's/^@end alphaenumerate/@end enumerate/g' \
311 $(srcdir)/gdb.texinfo | \
313 sed
-e
's/---/\\(em/g' \
316 # GDB MANUAL: HTML file
318 gdb_toc.html
: ${SFILES_DOC}
319 $(MAKEHTML
) $(MAKEHTMLFLAGS
) -I
${READLINE_DIR} -I
$(srcdir) $(srcdir)/gdb.texinfo
322 # GDB INTERNALS MANUAL: TeX dvi file
323 gdbint.
dvi : gdbint.texinfo
324 $(SET_TEXINPUTS
) $(TEX
) gdbint.texinfo
325 $(TEXINDEX
) gdbint.??
326 $(SET_TEXINPUTS
) $(TEX
) gdbint.texinfo
327 rm -f gdbint.aux gdbint.cp
* gdbint.fn
* gdbint.ky
* \
328 gdbint.log gdbint.pg
* gdbint.toc gdbint.tp
* gdbint.vr
*
330 gdbint.ps
: gdbint.
dvi
333 # GDB INTERNALS MANUAL: info file
335 gdbint.
info: gdbint.texinfo
336 $(MAKEINFO
) -o gdbint.
info $(srcdir)/gdbint.texinfo
338 # GDB INTERNALS MANUAL: HTML file
340 gdbint_toc.html
: gdbint.texinfo
341 $(MAKEHTML
) $(MAKEHTMLFLAGS
) $(srcdir)/gdbint.texinfo
343 stabs.
info: stabs.texinfo
344 $(MAKEINFO
) -o stabs.
info $(srcdir)/stabs.texinfo
346 # STABS DOCUMENTATION: HTML file
348 stabs_toc.html
: stabs.texinfo
349 $(MAKEHTML
) $(MAKEHTMLFLAGS
) $(srcdir)/stabs.texinfo
351 # STABS DOCUMENTATION: TeX dvi file
352 stabs.
dvi : stabs.texinfo
353 $(SET_TEXINPUTS
) $(TEX
) stabs.texinfo
355 $(SET_TEXINPUTS
) $(TEX
) stabs.texinfo
356 rm -f stabs.aux stabs.cp
* stabs.fn
* stabs.ky
* \
357 stabs.log stabs.pg
* stabs.toc stabs.tp
* stabs.vr
*
364 Makefile
: Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
) config.status
365 $(SHELL
) .
/config.status