3 # Architecture commands for GDB, the GNU debugger.
5 # Copyright (C) 1998-2019 Free Software Foundation, Inc.
7 # This file is part of GDB.
9 # This program is free software; you can redistribute it and/or modify
10 # it under the terms of the GNU General Public License as published by
11 # the Free Software Foundation; either version 3 of the License, or
12 # (at your option) any later version.
14 # This program is distributed in the hope that it will be useful,
15 # but WITHOUT ANY WARRANTY; without even the implied warranty of
16 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 # GNU General Public License for more details.
19 # You should have received a copy of the GNU General Public License
20 # along with this program. If not, see <http://www.gnu.org/licenses/>.
22 # Make certain that the script is not running in an internationalized
25 LC_ALL
=C
; export LC_ALL
33 echo "${file} missing? cp new-${file} ${file}" 1>&2
34 elif diff -u ${file} new-
${file}
36 echo "${file} unchanged" 1>&2
38 echo "${file} has changed? cp new-${file} ${file}" 1>&2
43 # Format of the input table
44 read="class returntype function formal actual staticdefault predefault postdefault invalid_p print garbage_at_eol"
50 # On some SH's, 'read' trims leading and trailing whitespace by
51 # default (e.g., bash), while on others (e.g., dash), it doesn't.
52 # Set IFS to empty to disable the trimming everywhere.
53 while IFS
='' read line
55 if test "${line}" = ""
58 elif test "${line}" = "#" -a "${comment}" = ""
61 elif expr "${line}" : "#" > /dev
/null
67 # The semantics of IFS varies between different SH's. Some
68 # treat ``;;' as three fields while some treat it as just two.
69 # Work around this by eliminating ``;;'' ....
70 line
="`echo "${line}" | sed -e 's/;;/; ;/g' -e 's/;;/; ;/g'`"
72 OFS
="${IFS}" ; IFS
="[;]"
73 eval read ${read} <<EOF
78 if test -n "${garbage_at_eol}"
80 echo "Garbage at end-of-line in ${line}" 1>&2
85 # .... and then going back through each field and strip out those
86 # that ended up with just that space character.
89 if eval test \"\
${${r}}\" = \"\
\"
96 m
) staticdefault
="${predefault}" ;;
97 M
) staticdefault
="0" ;;
98 * ) test "${staticdefault}" || staticdefault
=0 ;;
103 case "${invalid_p}" in
105 if test -n "${predefault}"
107 #invalid_p="gdbarch->${function} == ${predefault}"
108 predicate
="gdbarch->${function} != ${predefault}"
109 elif class_is_variable_p
111 predicate
="gdbarch->${function} != 0"
112 elif class_is_function_p
114 predicate
="gdbarch->${function} != NULL"
118 echo "Predicate function ${function} with invalid_p." 1>&2
125 # PREDEFAULT is a valid fallback definition of MEMBER when
126 # multi-arch is not enabled. This ensures that the
127 # default value, when multi-arch is the same as the
128 # default value when not multi-arch. POSTDEFAULT is
129 # always a valid definition of MEMBER as this again
130 # ensures consistency.
132 if [ -n "${postdefault}" ]
134 fallbackdefault
="${postdefault}"
135 elif [ -n "${predefault}" ]
137 fallbackdefault
="${predefault}"
142 #NOT YET: See gdbarch.log for basic verification of
157 fallback_default_p
()
159 [ -n "${postdefault}" -a "x${invalid_p}" != "x0" ] \
160 ||
[ -n "${predefault}" -a "x${invalid_p}" = "x0" ]
163 class_is_variable_p
()
171 class_is_function_p
()
174 *f
* |
*F
* |
*m
* |
*M
* ) true
;;
179 class_is_multiarch_p
()
187 class_is_predicate_p
()
190 *F
* |
*V
* |
*M
* ) true
;;
204 # dump out/verify the doco
214 # F -> function + predicate
215 # hiding a function + predicate to test function validity
218 # V -> variable + predicate
219 # hiding a variable + predicate to test variables validity
221 # hiding something from the ``struct info'' object
222 # m -> multi-arch function
223 # hiding a multi-arch function (parameterised with the architecture)
224 # M -> multi-arch function + predicate
225 # hiding a multi-arch function + predicate to test function validity
229 # For functions, the return type; for variables, the data type
233 # For functions, the member function name; for variables, the
234 # variable name. Member function names are always prefixed with
235 # ``gdbarch_'' for name-space purity.
239 # The formal argument list. It is assumed that the formal
240 # argument list includes the actual name of each list element.
241 # A function with no arguments shall have ``void'' as the
242 # formal argument list.
246 # The list of actual arguments. The arguments specified shall
247 # match the FORMAL list given above. Functions with out
248 # arguments leave this blank.
252 # To help with the GDB startup a static gdbarch object is
253 # created. STATICDEFAULT is the value to insert into that
254 # static gdbarch object. Since this a static object only
255 # simple expressions can be used.
257 # If STATICDEFAULT is empty, zero is used.
261 # An initial value to assign to MEMBER of the freshly
262 # malloc()ed gdbarch object. After initialization, the
263 # freshly malloc()ed object is passed to the target
264 # architecture code for further updates.
266 # If PREDEFAULT is empty, zero is used.
268 # A non-empty PREDEFAULT, an empty POSTDEFAULT and a zero
269 # INVALID_P are specified, PREDEFAULT will be used as the
270 # default for the non- multi-arch target.
272 # A zero PREDEFAULT function will force the fallback to call
275 # Variable declarations can refer to ``gdbarch'' which will
276 # contain the current architecture. Care should be taken.
280 # A value to assign to MEMBER of the new gdbarch object should
281 # the target architecture code fail to change the PREDEFAULT
284 # If POSTDEFAULT is empty, no post update is performed.
286 # If both INVALID_P and POSTDEFAULT are non-empty then
287 # INVALID_P will be used to determine if MEMBER should be
288 # changed to POSTDEFAULT.
290 # If a non-empty POSTDEFAULT and a zero INVALID_P are
291 # specified, POSTDEFAULT will be used as the default for the
292 # non- multi-arch target (regardless of the value of
295 # You cannot specify both a zero INVALID_P and a POSTDEFAULT.
297 # Variable declarations can refer to ``gdbarch'' which
298 # will contain the current architecture. Care should be
303 # A predicate equation that validates MEMBER. Non-zero is
304 # returned if the code creating the new architecture failed to
305 # initialize MEMBER or the initialized the member is invalid.
306 # If POSTDEFAULT is non-empty then MEMBER will be updated to
307 # that value. If POSTDEFAULT is empty then internal_error()
310 # If INVALID_P is empty, a check that MEMBER is no longer
311 # equal to PREDEFAULT is used.
313 # The expression ``0'' disables the INVALID_P check making
314 # PREDEFAULT a legitimate value.
316 # See also PREDEFAULT and POSTDEFAULT.
320 # An optional expression that convers MEMBER to a value
321 # suitable for formatting using %s.
323 # If PRINT is empty, core_addr_to_string_nz (for CORE_ADDR)
324 # or plongest (anything else) is used.
326 garbage_at_eol
) : ;;
328 # Catches stray fields.
331 echo "Bad field ${field}"
339 # See below (DOCO) for description of each field
341 i;const struct bfd_arch_info *;bfd_arch_info;;;&bfd_default_arch_struct;;;;gdbarch_bfd_arch_info (gdbarch)->printable_name
343 i;enum bfd_endian;byte_order;;;BFD_ENDIAN_BIG
344 i;enum bfd_endian;byte_order_for_code;;;BFD_ENDIAN_BIG
346 i;enum gdb_osabi;osabi;;;GDB_OSABI_UNKNOWN
348 i;const struct target_desc *;target_desc;;;;;;;host_address_to_string (gdbarch->target_desc)
350 # The bit byte-order has to do just with numbering of bits in debugging symbols
351 # and such. Conceptually, it's quite separate from byte/word byte order.
352 v;int;bits_big_endian;;;1;(gdbarch->byte_order == BFD_ENDIAN_BIG);;0
354 # Number of bits in a short or unsigned short for the target machine.
355 v;int;short_bit;;;8 * sizeof (short);2*TARGET_CHAR_BIT;;0
356 # Number of bits in an int or unsigned int for the target machine.
357 v;int;int_bit;;;8 * sizeof (int);4*TARGET_CHAR_BIT;;0
358 # Number of bits in a long or unsigned long for the target machine.
359 v;int;long_bit;;;8 * sizeof (long);4*TARGET_CHAR_BIT;;0
360 # Number of bits in a long long or unsigned long long for the target
362 v;int;long_long_bit;;;8 * sizeof (LONGEST);2*gdbarch->long_bit;;0
364 # The ABI default bit-size and format for "half", "float", "double", and
365 # "long double". These bit/format pairs should eventually be combined
366 # into a single object. For the moment, just initialize them as a pair.
367 # Each format describes both the big and little endian layouts (if
370 v;int;half_bit;;;16;2*TARGET_CHAR_BIT;;0
371 v;const struct floatformat **;half_format;;;;;floatformats_ieee_half;;pformat (gdbarch->half_format)
372 v;int;float_bit;;;8 * sizeof (float);4*TARGET_CHAR_BIT;;0
373 v;const struct floatformat **;float_format;;;;;floatformats_ieee_single;;pformat (gdbarch->float_format)
374 v;int;double_bit;;;8 * sizeof (double);8*TARGET_CHAR_BIT;;0
375 v;const struct floatformat **;double_format;;;;;floatformats_ieee_double;;pformat (gdbarch->double_format)
376 v;int;long_double_bit;;;8 * sizeof (long double);8*TARGET_CHAR_BIT;;0
377 v;const struct floatformat **;long_double_format;;;;;floatformats_ieee_double;;pformat (gdbarch->long_double_format)
379 # The ABI default bit-size for "wchar_t". wchar_t is a built-in type
380 # starting with C++11.
381 v;int;wchar_bit;;;8 * sizeof (wchar_t);4*TARGET_CHAR_BIT;;0
382 # One if \`wchar_t' is signed, zero if unsigned.
383 v;int;wchar_signed;;;1;-1;1
385 # Returns the floating-point format to be used for values of length LENGTH.
386 # NAME, if non-NULL, is the type name, which may be used to distinguish
387 # different target formats of the same length.
388 m;const struct floatformat **;floatformat_for_type;const char *name, int length;name, length;0;default_floatformat_for_type;;0
390 # For most targets, a pointer on the target and its representation as an
391 # address in GDB have the same size and "look the same". For such a
392 # target, you need only set gdbarch_ptr_bit and gdbarch_addr_bit
393 # / addr_bit will be set from it.
395 # If gdbarch_ptr_bit and gdbarch_addr_bit are different, you'll probably
396 # also need to set gdbarch_dwarf2_addr_size, gdbarch_pointer_to_address and
397 # gdbarch_address_to_pointer as well.
399 # ptr_bit is the size of a pointer on the target
400 v;int;ptr_bit;;;8 * sizeof (void*);gdbarch->int_bit;;0
401 # addr_bit is the size of a target address as represented in gdb
402 v;int;addr_bit;;;8 * sizeof (void*);0;gdbarch_ptr_bit (gdbarch);
404 # dwarf2_addr_size is the target address size as used in the Dwarf debug
405 # info. For .debug_frame FDEs, this is supposed to be the target address
406 # size from the associated CU header, and which is equivalent to the
407 # DWARF2_ADDR_SIZE as defined by the target specific GCC back-end.
408 # Unfortunately there is no good way to determine this value. Therefore
409 # dwarf2_addr_size simply defaults to the target pointer size.
411 # dwarf2_addr_size is not used for .eh_frame FDEs, which are generally
412 # defined using the target's pointer size so far.
414 # Note that dwarf2_addr_size only needs to be redefined by a target if the
415 # GCC back-end defines a DWARF2_ADDR_SIZE other than the target pointer size,
416 # and if Dwarf versions < 4 need to be supported.
417 v;int;dwarf2_addr_size;;;sizeof (void*);0;gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT;
419 # One if \`char' acts like \`signed char', zero if \`unsigned char'.
420 v;int;char_signed;;;1;-1;1
422 F;CORE_ADDR;read_pc;readable_regcache *regcache;regcache
423 F;void;write_pc;struct regcache *regcache, CORE_ADDR val;regcache, val
424 # Function for getting target's idea of a frame pointer. FIXME: GDB's
425 # whole scheme for dealing with "frames" and "frame pointers" needs a
427 m;void;virtual_frame_pointer;CORE_ADDR pc, int *frame_regnum, LONGEST *frame_offset;pc, frame_regnum, frame_offset;0;legacy_virtual_frame_pointer;;0
429 M;enum register_status;pseudo_register_read;readable_regcache *regcache, int cookednum, gdb_byte *buf;regcache, cookednum, buf
430 # Read a register into a new struct value. If the register is wholly
431 # or partly unavailable, this should call mark_value_bytes_unavailable
432 # as appropriate. If this is defined, then pseudo_register_read will
434 M;struct value *;pseudo_register_read_value;readable_regcache *regcache, int cookednum;regcache, cookednum
435 M;void;pseudo_register_write;struct regcache *regcache, int cookednum, const gdb_byte *buf;regcache, cookednum, buf
437 v;int;num_regs;;;0;-1
438 # This macro gives the number of pseudo-registers that live in the
439 # register namespace but do not get fetched or stored on the target.
440 # These pseudo-registers may be aliases for other registers,
441 # combinations of other registers, or they may be computed by GDB.
442 v;int;num_pseudo_regs;;;0;0;;0
444 # Assemble agent expression bytecode to collect pseudo-register REG.
445 # Return -1 if something goes wrong, 0 otherwise.
446 M;int;ax_pseudo_register_collect;struct agent_expr *ax, int reg;ax, reg
448 # Assemble agent expression bytecode to push the value of pseudo-register
449 # REG on the interpreter stack.
450 # Return -1 if something goes wrong, 0 otherwise.
451 M;int;ax_pseudo_register_push_stack;struct agent_expr *ax, int reg;ax, reg
453 # Some targets/architectures can do extra processing/display of
454 # segmentation faults. E.g., Intel MPX boundary faults.
455 # Call the architecture dependent function to handle the fault.
456 # UIOUT is the output stream where the handler will place information.
457 M;void;handle_segmentation_fault;struct ui_out *uiout;uiout
459 # GDB's standard (or well known) register numbers. These can map onto
460 # a real register or a pseudo (computed) register or not be defined at
462 # gdbarch_sp_regnum will hopefully be replaced by UNWIND_SP.
463 v;int;sp_regnum;;;-1;-1;;0
464 v;int;pc_regnum;;;-1;-1;;0
465 v;int;ps_regnum;;;-1;-1;;0
466 v;int;fp0_regnum;;;0;-1;;0
467 # Convert stab register number (from \`r\' declaration) to a gdb REGNUM.
468 m;int;stab_reg_to_regnum;int stab_regnr;stab_regnr;;no_op_reg_to_regnum;;0
469 # Provide a default mapping from a ecoff register number to a gdb REGNUM.
470 m;int;ecoff_reg_to_regnum;int ecoff_regnr;ecoff_regnr;;no_op_reg_to_regnum;;0
471 # Convert from an sdb register number to an internal gdb register number.
472 m;int;sdb_reg_to_regnum;int sdb_regnr;sdb_regnr;;no_op_reg_to_regnum;;0
473 # Provide a default mapping from a DWARF2 register number to a gdb REGNUM.
474 # Return -1 for bad REGNUM. Note: Several targets get this wrong.
475 m;int;dwarf2_reg_to_regnum;int dwarf2_regnr;dwarf2_regnr;;no_op_reg_to_regnum;;0
476 m;const char *;register_name;int regnr;regnr;;0
478 # Return the type of a register specified by the architecture. Only
479 # the register cache should call this function directly; others should
480 # use "register_type".
481 M;struct type *;register_type;int reg_nr;reg_nr
483 # Generate a dummy frame_id for THIS_FRAME assuming that the frame is
484 # a dummy frame. A dummy frame is created before an inferior call,
485 # the frame_id returned here must match the frame_id that was built
486 # for the inferior call. Usually this means the returned frame_id's
487 # stack address should match the address returned by
488 # gdbarch_push_dummy_call, and the returned frame_id's code address
489 # should match the address at which the breakpoint was set in the dummy
491 m;struct frame_id;dummy_id;struct frame_info *this_frame;this_frame;;default_dummy_id;;0
492 # Implement DUMMY_ID and PUSH_DUMMY_CALL, then delete
493 # deprecated_fp_regnum.
494 v;int;deprecated_fp_regnum;;;-1;-1;;0
496 M;CORE_ADDR;push_dummy_call;struct value *function, struct regcache *regcache, CORE_ADDR bp_addr, int nargs, struct value **args, CORE_ADDR sp, function_call_return_method return_method, CORE_ADDR struct_addr;function, regcache, bp_addr, nargs, args, sp, return_method, struct_addr
497 v;int;call_dummy_location;;;;AT_ENTRY_POINT;;0
498 M;CORE_ADDR;push_dummy_code;CORE_ADDR sp, CORE_ADDR funaddr, struct value **args, int nargs, struct type *value_type, CORE_ADDR *real_pc, CORE_ADDR *bp_addr, struct regcache *regcache;sp, funaddr, args, nargs, value_type, real_pc, bp_addr, regcache
500 # Return true if the code of FRAME is writable.
501 m;int;code_of_frame_writable;struct frame_info *frame;frame;;default_code_of_frame_writable;;0
503 m;void;print_registers_info;struct ui_file *file, struct frame_info *frame, int regnum, int all;file, frame, regnum, all;;default_print_registers_info;;0
504 m;void;print_float_info;struct ui_file *file, struct frame_info *frame, const char *args;file, frame, args;;default_print_float_info;;0
505 M;void;print_vector_info;struct ui_file *file, struct frame_info *frame, const char *args;file, frame, args
506 # MAP a GDB RAW register number onto a simulator register number. See
507 # also include/...-sim.h.
508 m;int;register_sim_regno;int reg_nr;reg_nr;;legacy_register_sim_regno;;0
509 m;int;cannot_fetch_register;int regnum;regnum;;cannot_register_not;;0
510 m;int;cannot_store_register;int regnum;regnum;;cannot_register_not;;0
512 # Determine the address where a longjmp will land and save this address
513 # in PC. Return nonzero on success.
515 # FRAME corresponds to the longjmp frame.
516 F;int;get_longjmp_target;struct frame_info *frame, CORE_ADDR *pc;frame, pc
519 v;int;believe_pcc_promotion;;;;;;;
521 m;int;convert_register_p;int regnum, struct type *type;regnum, type;0;generic_convert_register_p;;0
522 f;int;register_to_value;struct frame_info *frame, int regnum, struct type *type, gdb_byte *buf, int *optimizedp, int *unavailablep;frame, regnum, type, buf, optimizedp, unavailablep;0
523 f;void;value_to_register;struct frame_info *frame, int regnum, struct type *type, const gdb_byte *buf;frame, regnum, type, buf;0
524 # Construct a value representing the contents of register REGNUM in
525 # frame FRAME_ID, interpreted as type TYPE. The routine needs to
526 # allocate and return a struct value with all value attributes
527 # (but not the value contents) filled in.
528 m;struct value *;value_from_register;struct type *type, int regnum, struct frame_id frame_id;type, regnum, frame_id;;default_value_from_register;;0
530 m;CORE_ADDR;pointer_to_address;struct type *type, const gdb_byte *buf;type, buf;;unsigned_pointer_to_address;;0
531 m;void;address_to_pointer;struct type *type, gdb_byte *buf, CORE_ADDR addr;type, buf, addr;;unsigned_address_to_pointer;;0
532 M;CORE_ADDR;integer_to_address;struct type *type, const gdb_byte *buf;type, buf
534 # Return the return-value convention that will be used by FUNCTION
535 # to return a value of type VALTYPE. FUNCTION may be NULL in which
536 # case the return convention is computed based only on VALTYPE.
538 # If READBUF is not NULL, extract the return value and save it in this buffer.
540 # If WRITEBUF is not NULL, it contains a return value which will be
541 # stored into the appropriate register. This can be used when we want
542 # to force the value returned by a function (see the "return" command
544 M;enum return_value_convention;return_value;struct value *function, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf;function, valtype, regcache, readbuf, writebuf
546 # Return true if the return value of function is stored in the first hidden
547 # parameter. In theory, this feature should be language-dependent, specified
548 # by language and its ABI, such as C++. Unfortunately, compiler may
549 # implement it to a target-dependent feature. So that we need such hook here
550 # to be aware of this in GDB.
551 m;int;return_in_first_hidden_param_p;struct type *type;type;;default_return_in_first_hidden_param_p;;0
553 m;CORE_ADDR;skip_prologue;CORE_ADDR ip;ip;0;0
554 M;CORE_ADDR;skip_main_prologue;CORE_ADDR ip;ip
555 # On some platforms, a single function may provide multiple entry points,
556 # e.g. one that is used for function-pointer calls and a different one
557 # that is used for direct function calls.
558 # In order to ensure that breakpoints set on the function will trigger
559 # no matter via which entry point the function is entered, a platform
560 # may provide the skip_entrypoint callback. It is called with IP set
561 # to the main entry point of a function (as determined by the symbol table),
562 # and should return the address of the innermost entry point, where the
563 # actual breakpoint needs to be set. Note that skip_entrypoint is used
564 # by GDB common code even when debugging optimized code, where skip_prologue
566 M;CORE_ADDR;skip_entrypoint;CORE_ADDR ip;ip
568 f;int;inner_than;CORE_ADDR lhs, CORE_ADDR rhs;lhs, rhs;0;0
569 m;const gdb_byte *;breakpoint_from_pc;CORE_ADDR *pcptr, int *lenptr;pcptr, lenptr;0;default_breakpoint_from_pc;;0
571 # Return the breakpoint kind for this target based on *PCPTR.
572 m;int;breakpoint_kind_from_pc;CORE_ADDR *pcptr;pcptr;;0;
574 # Return the software breakpoint from KIND. KIND can have target
575 # specific meaning like the Z0 kind parameter.
576 # SIZE is set to the software breakpoint's length in memory.
577 m;const gdb_byte *;sw_breakpoint_from_kind;int kind, int *size;kind, size;;NULL;;0
579 # Return the breakpoint kind for this target based on the current
580 # processor state (e.g. the current instruction mode on ARM) and the
581 # *PCPTR. In default, it is gdbarch->breakpoint_kind_from_pc.
582 m;int;breakpoint_kind_from_current_state;struct regcache *regcache, CORE_ADDR *pcptr;regcache, pcptr;0;default_breakpoint_kind_from_current_state;;0
584 M;CORE_ADDR;adjust_breakpoint_address;CORE_ADDR bpaddr;bpaddr
585 m;int;memory_insert_breakpoint;struct bp_target_info *bp_tgt;bp_tgt;0;default_memory_insert_breakpoint;;0
586 m;int;memory_remove_breakpoint;struct bp_target_info *bp_tgt;bp_tgt;0;default_memory_remove_breakpoint;;0
587 v;CORE_ADDR;decr_pc_after_break;;;0;;;0
589 # A function can be addressed by either it's "pointer" (possibly a
590 # descriptor address) or "entry point" (first executable instruction).
591 # The method "convert_from_func_ptr_addr" converting the former to the
592 # latter. gdbarch_deprecated_function_start_offset is being used to implement
593 # a simplified subset of that functionality - the function's address
594 # corresponds to the "function pointer" and the function's start
595 # corresponds to the "function entry point" - and hence is redundant.
597 v;CORE_ADDR;deprecated_function_start_offset;;;0;;;0
599 # Return the remote protocol register number associated with this
600 # register. Normally the identity mapping.
601 m;int;remote_register_number;int regno;regno;;default_remote_register_number;;0
603 # Fetch the target specific address used to represent a load module.
604 F;CORE_ADDR;fetch_tls_load_module_address;struct objfile *objfile;objfile
606 v;CORE_ADDR;frame_args_skip;;;0;;;0
607 m;CORE_ADDR;unwind_pc;struct frame_info *next_frame;next_frame;;default_unwind_pc;;0
608 m;CORE_ADDR;unwind_sp;struct frame_info *next_frame;next_frame;;default_unwind_sp;;0
609 # DEPRECATED_FRAME_LOCALS_ADDRESS as been replaced by the per-frame
610 # frame-base. Enable frame-base before frame-unwind.
611 F;int;frame_num_args;struct frame_info *frame;frame
613 M;CORE_ADDR;frame_align;CORE_ADDR address;address
614 m;int;stabs_argument_has_addr;struct type *type;type;;default_stabs_argument_has_addr;;0
615 v;int;frame_red_zone_size
617 m;CORE_ADDR;convert_from_func_ptr_addr;CORE_ADDR addr, struct target_ops *targ;addr, targ;;convert_from_func_ptr_addr_identity;;0
618 # On some machines there are bits in addresses which are not really
619 # part of the address, but are used by the kernel, the hardware, etc.
620 # for special purposes. gdbarch_addr_bits_remove takes out any such bits so
621 # we get a "real" address such as one would find in a symbol table.
622 # This is used only for addresses of instructions, and even then I'm
623 # not sure it's used in all contexts. It exists to deal with there
624 # being a few stray bits in the PC which would mislead us, not as some
625 # sort of generic thing to handle alignment or segmentation (it's
626 # possible it should be in TARGET_READ_PC instead).
627 m;CORE_ADDR;addr_bits_remove;CORE_ADDR addr;addr;;core_addr_identity;;0
629 # On some machines, not all bits of an address word are significant.
630 # For example, on AArch64, the top bits of an address known as the "tag"
631 # are ignored by the kernel, the hardware, etc. and can be regarded as
632 # additional data associated with the address.
633 v;int;significant_addr_bit;;;;;;0
635 # FIXME/cagney/2001-01-18: This should be split in two. A target method that
636 # indicates if the target needs software single step. An ISA method to
639 # FIXME/cagney/2001-01-18: The logic is backwards. It should be asking if the
640 # target can single step. If not, then implement single step using breakpoints.
642 # Return a vector of addresses on which the software single step
643 # breakpoints should be inserted. NULL means software single step is
645 # Multiple breakpoints may be inserted for some instructions such as
646 # conditional branch. However, each implementation must always evaluate
647 # the condition and only put the breakpoint at the branch destination if
648 # the condition is true, so that we ensure forward progress when stepping
649 # past a conditional branch to self.
650 F;std::vector<CORE_ADDR>;software_single_step;struct regcache *regcache;regcache
652 # Return non-zero if the processor is executing a delay slot and a
653 # further single-step is needed before the instruction finishes.
654 M;int;single_step_through_delay;struct frame_info *frame;frame
655 # FIXME: cagney/2003-08-28: Need to find a better way of selecting the
656 # disassembler. Perhaps objdump can handle it?
657 f;int;print_insn;bfd_vma vma, struct disassemble_info *info;vma, info;;default_print_insn;;0
658 f;CORE_ADDR;skip_trampoline_code;struct frame_info *frame, CORE_ADDR pc;frame, pc;;generic_skip_trampoline_code;;0
661 # If in_solib_dynsym_resolve_code() returns true, and SKIP_SOLIB_RESOLVER
662 # evaluates non-zero, this is the address where the debugger will place
663 # a step-resume breakpoint to get us past the dynamic linker.
664 m;CORE_ADDR;skip_solib_resolver;CORE_ADDR pc;pc;;generic_skip_solib_resolver;;0
665 # Some systems also have trampoline code for returning from shared libs.
666 m;int;in_solib_return_trampoline;CORE_ADDR pc, const char *name;pc, name;;generic_in_solib_return_trampoline;;0
668 # Return true if PC lies inside an indirect branch thunk.
669 m;bool;in_indirect_branch_thunk;CORE_ADDR pc;pc;;default_in_indirect_branch_thunk;;0
671 # A target might have problems with watchpoints as soon as the stack
672 # frame of the current function has been destroyed. This mostly happens
673 # as the first action in a function's epilogue. stack_frame_destroyed_p()
674 # is defined to return a non-zero value if either the given addr is one
675 # instruction after the stack destroying instruction up to the trailing
676 # return instruction or if we can figure out that the stack frame has
677 # already been invalidated regardless of the value of addr. Targets
678 # which don't suffer from that problem could just let this functionality
680 m;int;stack_frame_destroyed_p;CORE_ADDR addr;addr;0;generic_stack_frame_destroyed_p;;0
681 # Process an ELF symbol in the minimal symbol table in a backend-specific
682 # way. Normally this hook is supposed to do nothing, however if required,
683 # then this hook can be used to apply tranformations to symbols that are
684 # considered special in some way. For example the MIPS backend uses it
685 # to interpret \`st_other' information to mark compressed code symbols so
686 # that they can be treated in the appropriate manner in the processing of
687 # the main symbol table and DWARF-2 records.
688 F;void;elf_make_msymbol_special;asymbol *sym, struct minimal_symbol *msym;sym, msym
689 f;void;coff_make_msymbol_special;int val, struct minimal_symbol *msym;val, msym;;default_coff_make_msymbol_special;;0
690 # Process a symbol in the main symbol table in a backend-specific way.
691 # Normally this hook is supposed to do nothing, however if required,
692 # then this hook can be used to apply tranformations to symbols that
693 # are considered special in some way. This is currently used by the
694 # MIPS backend to make sure compressed code symbols have the ISA bit
695 # set. This in turn is needed for symbol values seen in GDB to match
696 # the values used at the runtime by the program itself, for function
697 # and label references.
698 f;void;make_symbol_special;struct symbol *sym, struct objfile *objfile;sym, objfile;;default_make_symbol_special;;0
699 # Adjust the address retrieved from a DWARF-2 record other than a line
700 # entry in a backend-specific way. Normally this hook is supposed to
701 # return the address passed unchanged, however if that is incorrect for
702 # any reason, then this hook can be used to fix the address up in the
703 # required manner. This is currently used by the MIPS backend to make
704 # sure addresses in FDE, range records, etc. referring to compressed
705 # code have the ISA bit set, matching line information and the symbol
707 f;CORE_ADDR;adjust_dwarf2_addr;CORE_ADDR pc;pc;;default_adjust_dwarf2_addr;;0
708 # Adjust the address updated by a line entry in a backend-specific way.
709 # Normally this hook is supposed to return the address passed unchanged,
710 # however in the case of inconsistencies in these records, this hook can
711 # be used to fix them up in the required manner. This is currently used
712 # by the MIPS backend to make sure all line addresses in compressed code
713 # are presented with the ISA bit set, which is not always the case. This
714 # in turn ensures breakpoint addresses are correctly matched against the
716 f;CORE_ADDR;adjust_dwarf2_line;CORE_ADDR addr, int rel;addr, rel;;default_adjust_dwarf2_line;;0
717 v;int;cannot_step_breakpoint;;;0;0;;0
718 # See comment in target.h about continuable, steppable and
719 # non-steppable watchpoints.
720 v;int;have_nonsteppable_watchpoint;;;0;0;;0
721 F;int;address_class_type_flags;int byte_size, int dwarf2_addr_class;byte_size, dwarf2_addr_class
722 M;const char *;address_class_type_flags_to_name;int type_flags;type_flags
723 # Execute vendor-specific DWARF Call Frame Instruction. OP is the instruction.
724 # FS are passed from the generic execute_cfa_program function.
725 m;bool;execute_dwarf_cfa_vendor_op;gdb_byte op, struct dwarf2_frame_state *fs;op, fs;;default_execute_dwarf_cfa_vendor_op;;0
727 # Return the appropriate type_flags for the supplied address class.
728 # This function should return 1 if the address class was recognized and
729 # type_flags was set, zero otherwise.
730 M;int;address_class_name_to_type_flags;const char *name, int *type_flags_ptr;name, type_flags_ptr
731 # Is a register in a group
732 m;int;register_reggroup_p;int regnum, struct reggroup *reggroup;regnum, reggroup;;default_register_reggroup_p;;0
733 # Fetch the pointer to the ith function argument.
734 F;CORE_ADDR;fetch_pointer_argument;struct frame_info *frame, int argi, struct type *type;frame, argi, type
736 # Iterate over all supported register notes in a core file. For each
737 # supported register note section, the iterator must call CB and pass
738 # CB_DATA unchanged. If REGCACHE is not NULL, the iterator can limit
739 # the supported register note sections based on the current register
740 # values. Otherwise it should enumerate all supported register note
742 M;void;iterate_over_regset_sections;iterate_over_regset_sections_cb *cb, void *cb_data, const struct regcache *regcache;cb, cb_data, regcache
744 # Create core file notes
745 M;char *;make_corefile_notes;bfd *obfd, int *note_size;obfd, note_size
747 # Find core file memory regions
748 M;int;find_memory_regions;find_memory_region_ftype func, void *data;func, data
750 # Read offset OFFSET of TARGET_OBJECT_LIBRARIES formatted shared libraries list from
751 # core file into buffer READBUF with length LEN. Return the number of bytes read
752 # (zero indicates failure).
753 # failed, otherwise, return the red length of READBUF.
754 M;ULONGEST;core_xfer_shared_libraries;gdb_byte *readbuf, ULONGEST offset, ULONGEST len;readbuf, offset, len
756 # Read offset OFFSET of TARGET_OBJECT_LIBRARIES_AIX formatted shared
757 # libraries list from core file into buffer READBUF with length LEN.
758 # Return the number of bytes read (zero indicates failure).
759 M;ULONGEST;core_xfer_shared_libraries_aix;gdb_byte *readbuf, ULONGEST offset, ULONGEST len;readbuf, offset, len
761 # How the core target converts a PTID from a core file to a string.
762 M;const char *;core_pid_to_str;ptid_t ptid;ptid
764 # How the core target extracts the name of a thread from a core file.
765 M;const char *;core_thread_name;struct thread_info *thr;thr
767 # Read offset OFFSET of TARGET_OBJECT_SIGNAL_INFO signal information
768 # from core file into buffer READBUF with length LEN. Return the number
769 # of bytes read (zero indicates EOF, a negative value indicates failure
).
770 M
;LONGEST
;core_xfer_siginfo
;gdb_byte
*readbuf
, ULONGEST offset
, ULONGEST len
; readbuf
, offset
, len
772 # BFD target to use when generating a core file.
773 V
;const char
*;gcore_bfd_target
;;;0;0;;;pstring
(gdbarch-
>gcore_bfd_target
)
775 # If the elements of C++ vtables are in-place function descriptors rather
776 # than normal function pointers (which may point to code or a descriptor),
778 v
;int
;vtable_function_descriptors
;;;0;0;;0
780 # Set if the least significant bit of the delta is used instead of the least
781 # significant bit of the pfn for pointers to virtual member functions.
782 v
;int
;vbit_in_delta
;;;0;0;;0
784 # Advance PC to next instruction in order to skip a permanent breakpoint.
785 f
;void
;skip_permanent_breakpoint
;struct regcache
*regcache
;regcache
;default_skip_permanent_breakpoint
;default_skip_permanent_breakpoint
;;0
787 # The maximum length of an instruction on this architecture in bytes.
788 V
;ULONGEST
;max_insn_length
;;;0;0
790 # Copy the instruction at FROM to TO, and make any adjustments
791 # necessary to single-step it at that address.
793 # REGS holds the state the thread's registers will have before
794 # executing the copied instruction; the PC in REGS will refer to FROM,
795 # not the copy at TO. The caller should update it to point at TO later.
797 # Return a pointer to data of the architecture's choice to be passed
798 # to gdbarch_displaced_step_fixup. Or, return NULL to indicate that
799 # the instruction's effects have been completely simulated, with the
800 # resulting state written back to REGS.
802 # For a general explanation of displaced stepping and how GDB uses it,
803 # see the comments in infrun.c.
805 # The TO area is only guaranteed to have space for
806 # gdbarch_max_insn_length (arch) bytes, so this function must not
807 # write more bytes than that to that area.
809 # If you do not provide this function, GDB assumes that the
810 # architecture does not support displaced stepping.
812 # If the instruction cannot execute out of line, return NULL. The
813 # core falls back to stepping past the instruction in-line instead in
815 M
;struct displaced_step_closure
*;displaced_step_copy_insn
;CORE_ADDR from
, CORE_ADDR to
, struct regcache
*regs
;from
, to
, regs
817 # Return true if GDB should use hardware single-stepping to execute
818 # the displaced instruction identified by CLOSURE. If false,
819 # GDB will simply restart execution at the displaced instruction
820 # location, and it is up to the target to ensure GDB will receive
821 # control again (e.g. by placing a software breakpoint instruction
822 # into the displaced instruction buffer).
824 # The default implementation returns false on all targets that
825 # provide a gdbarch_software_single_step routine, and true otherwise.
826 m
;int
;displaced_step_hw_singlestep
;struct displaced_step_closure
*closure
;closure
;;default_displaced_step_hw_singlestep
;;0
828 # Fix up the state resulting from successfully single-stepping a
829 # displaced instruction, to give the result we would have gotten from
830 # stepping the instruction in its original location.
832 # REGS is the register state resulting from single-stepping the
833 # displaced instruction.
835 # CLOSURE is the result from the matching call to
836 # gdbarch_displaced_step_copy_insn.
838 # If you provide gdbarch_displaced_step_copy_insn.but not this
839 # function, then GDB assumes that no fixup is needed after
840 # single-stepping the instruction.
842 # For a general explanation of displaced stepping and how GDB uses it,
843 # see the comments in infrun.c.
844 M
;void
;displaced_step_fixup
;struct displaced_step_closure
*closure
, CORE_ADDR from
, CORE_ADDR to
, struct regcache
*regs
;closure
, from
, to
, regs
;;NULL
846 # Return the address of an appropriate place to put displaced
847 # instructions while we step over them. There need only be one such
848 # place, since we're only stepping one thread over a breakpoint at a
851 # For a general explanation of displaced stepping and how GDB uses it,
852 # see the comments in infrun.c.
853 m
;CORE_ADDR
;displaced_step_location
;void
;;;NULL
;;(! gdbarch-
>displaced_step_location
) != (! gdbarch-
>displaced_step_copy_insn
)
855 # Relocate an instruction to execute at a different address. OLDLOC
856 # is the address in the inferior memory where the instruction to
857 # relocate is currently at. On input, TO points to the destination
858 # where we want the instruction to be copied (and possibly adjusted)
859 # to. On output, it points to one past the end of the resulting
860 # instruction(s). The effect of executing the instruction at TO shall
861 # be the same as if executing it at FROM. For example, call
862 # instructions that implicitly push the return address on the stack
863 # should be adjusted to return to the instruction after OLDLOC;
864 # relative branches, and other PC-relative instructions need the
865 # offset adjusted; etc.
866 M
;void
;relocate_instruction
;CORE_ADDR
*to
, CORE_ADDR from
;to
, from
;;NULL
868 # Refresh overlay mapped state for section OSECT.
869 F
;void
;overlay_update
;struct obj_section
*osect
;osect
871 M
;const struct target_desc
*;core_read_description
;struct target_ops
*target
, bfd
*abfd
;target
, abfd
873 # Handle special encoding of static variables in stabs debug info.
874 F
;const char
*;static_transform_name
;const char
*name
;name
875 # Set if the address in N_SO or N_FUN stabs may be zero.
876 v
;int
;sofun_address_maybe_missing
;;;0;0;;0
878 # Parse the instruction at ADDR storing in the record execution log
879 # the registers REGCACHE and memory ranges that will be affected when
880 # the instruction executes, along with their current values.
881 # Return -1 if something goes wrong, 0 otherwise.
882 M
;int
;process_record
;struct regcache
*regcache
, CORE_ADDR addr
;regcache
, addr
884 # Save process state after a signal.
885 # Return -1 if something goes wrong, 0 otherwise.
886 M
;int
;process_record_signal
;struct regcache
*regcache
, enum gdb_signal signal
;regcache
, signal
888 # Signal translation: translate inferior's signal (target's) number
889 # into GDB's representation. The implementation of this method must
890 # be host independent. IOW, don't rely on symbols of the NAT_FILE
891 # header (the nm-*.h files), the host <signal.h> header, or similar
892 # headers. This is mainly used when cross-debugging core files ---
893 # "Live" targets hide the translation behind the target interface
894 # (target_wait, target_resume, etc.).
895 M
;enum gdb_signal
;gdb_signal_from_target
;int signo
;signo
897 # Signal translation: translate the GDB's internal signal number into
898 # the inferior's signal (target's) representation. The implementation
899 # of this method must be host independent. IOW, don't rely on symbols
900 # of the NAT_FILE header (the nm-*.h files), the host <signal.h>
901 # header, or similar headers.
902 # Return the target signal number if found, or -1 if the GDB internal
903 # signal number is invalid.
904 M
;int
;gdb_signal_to_target
;enum gdb_signal signal
;signal
906 # Extra signal info inspection.
908 # Return a type suitable to inspect extra signal information.
909 M
;struct
type *;get_siginfo_type
;void
;
911 # Record architecture-specific information from the symbol table.
912 M
;void
;record_special_symbol
;struct objfile
*objfile
, asymbol
*sym
;objfile
, sym
914 # Function for the 'catch syscall' feature.
916 # Get architecture-specific system calls information from registers.
917 M
;LONGEST
;get_syscall_number
;thread_info
*thread
;thread
919 # The filename of the XML syscall for this architecture.
920 v
;const char
*;xml_syscall_file
;;;0;0;;0;pstring
(gdbarch-
>xml_syscall_file
)
922 # Information about system calls from this architecture
923 v
;struct syscalls_info
*;syscalls_info
;;;0;0;;0;host_address_to_string
(gdbarch-
>syscalls_info
)
925 # SystemTap related fields and functions.
927 # A NULL-terminated array of prefixes used to mark an integer constant
928 # on the architecture's assembly.
929 # For example, on x86 integer constants are written as:
931 # \$10 ;; integer constant 10
933 # in this case, this prefix would be the character \`\$\'.
934 v
;const char
*const
*;stap_integer_prefixes
;;;0;0;;0;pstring_list
(gdbarch-
>stap_integer_prefixes
)
936 # A NULL-terminated array of suffixes used to mark an integer constant
937 # on the architecture's assembly.
938 v
;const char
*const
*;stap_integer_suffixes
;;;0;0;;0;pstring_list
(gdbarch-
>stap_integer_suffixes
)
940 # A NULL-terminated array of prefixes used to mark a register name on
941 # the architecture's assembly.
942 # For example, on x86 the register name is written as:
944 # \%eax ;; register eax
946 # in this case, this prefix would be the character \`\%\'.
947 v
;const char
*const
*;stap_register_prefixes
;;;0;0;;0;pstring_list
(gdbarch-
>stap_register_prefixes
)
949 # A NULL-terminated array of suffixes used to mark a register name on
950 # the architecture's assembly.
951 v
;const char
*const
*;stap_register_suffixes
;;;0;0;;0;pstring_list
(gdbarch-
>stap_register_suffixes
)
953 # A NULL-terminated array of prefixes used to mark a register
954 # indirection on the architecture's assembly.
955 # For example, on x86 the register indirection is written as:
957 # \(\%eax\) ;; indirecting eax
959 # in this case, this prefix would be the charater \`\(\'.
961 # Please note that we use the indirection prefix also for register
962 # displacement, e.g., \`4\(\%eax\)\' on x86.
963 v
;const char
*const
*;stap_register_indirection_prefixes
;;;0;0;;0;pstring_list
(gdbarch-
>stap_register_indirection_prefixes
)
965 # A NULL-terminated array of suffixes used to mark a register
966 # indirection on the architecture's assembly.
967 # For example, on x86 the register indirection is written as:
969 # \(\%eax\) ;; indirecting eax
971 # in this case, this prefix would be the charater \`\)\'.
973 # Please note that we use the indirection suffix also for register
974 # displacement, e.g., \`4\(\%eax\)\' on x86.
975 v
;const char
*const
*;stap_register_indirection_suffixes
;;;0;0;;0;pstring_list
(gdbarch-
>stap_register_indirection_suffixes
)
977 # Prefix(es) used to name a register using GDB's nomenclature.
979 # For example, on PPC a register is represented by a number in the assembly
980 # language (e.g., \`10\' is the 10th general-purpose register). However,
981 # inside GDB this same register has an \`r\' appended to its name, so the 10th
982 # register would be represented as \`r10\' internally.
983 v
;const char
*;stap_gdb_register_prefix
;;;0;0;;0;pstring
(gdbarch-
>stap_gdb_register_prefix
)
985 # Suffix used to name a register using GDB's nomenclature.
986 v
;const char
*;stap_gdb_register_suffix
;;;0;0;;0;pstring
(gdbarch-
>stap_gdb_register_suffix
)
988 # Check if S is a single operand.
990 # Single operands can be:
991 # \- Literal integers, e.g. \`\$10\' on x86
992 # \- Register access, e.g. \`\%eax\' on x86
993 # \- Register indirection, e.g. \`\(\%eax\)\' on x86
994 # \- Register displacement, e.g. \`4\(\%eax\)\' on x86
996 # This function should check for these patterns on the string
997 # and return 1 if some were found, or zero otherwise. Please try to match
998 # as much info as you can from the string, i.e., if you have to match
999 # something like \`\(\%\', do not match just the \`\(\'.
1000 M
;int
;stap_is_single_operand
;const char
*s
;s
1002 # Function used to handle a "special case" in the parser.
1004 # A "special case" is considered to be an unknown token, i.e., a token
1005 # that the parser does not know how to parse. A good example of special
1006 # case would be ARM's register displacement syntax:
1008 # [R0, #4] ;; displacing R0 by 4
1010 # Since the parser assumes that a register displacement is of the form:
1012 # <number> <indirection_prefix> <register_name> <indirection_suffix>
1014 # it means that it will not be able to recognize and parse this odd syntax.
1015 # Therefore, we should add a special case function that will handle this token.
1017 # This function should generate the proper expression form of the expression
1018 # using GDB\'s internal expression mechanism (e.g., \`write_exp_elt_opcode\'
1019 # and so on). It should also return 1 if the parsing was successful, or zero
1020 # if the token was not recognized as a special token (in this case, returning
1021 # zero means that the special parser is deferring the parsing to the generic
1022 # parser), and should advance the buffer pointer (p->arg).
1023 M
;int
;stap_parse_special_token
;struct stap_parse_info
*p
;p
1025 # Perform arch-dependent adjustments to a register name.
1027 # In very specific situations, it may be necessary for the register
1028 # name present in a SystemTap probe's argument to be handled in a
1029 # special way. For example, on i386, GCC may over-optimize the
1030 # register allocation and use smaller registers than necessary. In
1031 # such cases, the client that is reading and evaluating the SystemTap
1032 # probe (ourselves) will need to actually fetch values from the wider
1033 # version of the register in question.
1035 # To illustrate the example, consider the following probe argument
1040 # This argument says that its value can be found at the %ax register,
1041 # which is a 16-bit register. However, the argument's prefix says
1042 # that its type is "uint32_t", which is 32-bit in size. Therefore, in
1043 # this case, GDB should actually fetch the probe's value from register
1044 # %eax, not %ax. In this scenario, this function would actually
1045 # replace the register name from %ax to %eax.
1047 # The rationale for this can be found at PR breakpoints/24541.
1048 M
;void
;stap_adjust_register
;struct stap_parse_info
*p
, std
::string \
®name
, int regnum
;p
, regname
, regnum
1050 # DTrace related functions.
1052 # The expression to compute the NARTGth+1 argument to a DTrace USDT probe.
1053 # NARG must be >= 0.
1054 M
;void
;dtrace_parse_probe_argument
;struct parser_state
*pstate
, int narg
;pstate
, narg
1056 # True if the given ADDR does not contain the instruction sequence
1057 # corresponding to a disabled DTrace is-enabled probe.
1058 M
;int
;dtrace_probe_is_enabled
;CORE_ADDR addr
;addr
1060 # Enable a DTrace is-enabled probe at ADDR.
1061 M
;void
;dtrace_enable_probe
;CORE_ADDR addr
;addr
1063 # Disable a DTrace is-enabled probe at ADDR.
1064 M
;void
;dtrace_disable_probe
;CORE_ADDR addr
;addr
1066 # True if the list of shared libraries is one and only for all
1067 # processes, as opposed to a list of shared libraries per inferior.
1068 # This usually means that all processes, although may or may not share
1069 # an address space, will see the same set of symbols at the same
1071 v
;int
;has_global_solist
;;;0;0;;0
1073 # On some targets, even though each inferior has its own private
1074 # address space, the debug interface takes care of making breakpoints
1075 # visible to all address spaces automatically. For such cases,
1076 # this property should be set to true.
1077 v
;int
;has_global_breakpoints
;;;0;0;;0
1079 # True if inferiors share an address space (e.g., uClinux).
1080 m
;int
;has_shared_address_space
;void
;;;default_has_shared_address_space
;;0
1082 # True if a fast tracepoint can be set at an address.
1083 m
;int
;fast_tracepoint_valid_at
;CORE_ADDR addr
, std
::string
*msg
;addr
, msg
;;default_fast_tracepoint_valid_at
;;0
1085 # Guess register state based on tracepoint location. Used for tracepoints
1086 # where no registers have been collected, but there's only one location,
1087 # allowing us to guess the PC value, and perhaps some other registers.
1088 # On entry, regcache has all registers marked as unavailable.
1089 m
;void
;guess_tracepoint_registers
;struct regcache
*regcache
, CORE_ADDR addr
;regcache
, addr
;;default_guess_tracepoint_registers
;;0
1091 # Return the "auto" target charset.
1092 f
;const char
*;auto_charset
;void
;;default_auto_charset
;default_auto_charset
;;0
1093 # Return the "auto" target wide charset.
1094 f
;const char
*;auto_wide_charset
;void
;;default_auto_wide_charset
;default_auto_wide_charset
;;0
1096 # If non-empty, this is a file extension that will be opened in place
1097 # of the file extension reported by the shared library list.
1099 # This is most useful for toolchains that use a post-linker tool,
1100 # where the names of the files run on the target differ in extension
1101 # compared to the names of the files GDB should load for debug info.
1102 v
;const char
*;solib_symbols_extension
;;;;;;;pstring
(gdbarch-
>solib_symbols_extension
)
1104 # If true, the target OS has DOS-based file system semantics. That
1105 # is, absolute paths include a drive name, and the backslash is
1106 # considered a directory separator.
1107 v
;int
;has_dos_based_file_system
;;;0;0;;0
1109 # Generate bytecodes to collect the return address in a frame.
1110 # Since the bytecodes run on the target, possibly with GDB not even
1111 # connected, the full unwinding machinery is not available, and
1112 # typically this function will issue bytecodes for one or more likely
1113 # places that the return address may be found.
1114 m
;void
;gen_return_address
;struct agent_expr
*ax
, struct axs_value
*value
, CORE_ADDR scope
;ax
, value
, scope
;;default_gen_return_address
;;0
1116 # Implement the "info proc" command.
1117 M
;void
;info_proc
;const char
*args
, enum info_proc_what what
;args
, what
1119 # Implement the "info proc" command for core files. Noe that there
1120 # are two "info_proc"-like methods on gdbarch -- one for core files,
1121 # one for live targets.
1122 M
;void
;core_info_proc
;const char
*args
, enum info_proc_what what
;args
, what
1124 # Iterate over all objfiles in the order that makes the most sense
1125 # for the architecture to make global symbol searches.
1127 # CB is a callback function where OBJFILE is the objfile to be searched,
1128 # and CB_DATA a pointer to user-defined data (the same data that is passed
1129 # when calling this gdbarch method). The iteration stops if this function
1132 # CB_DATA is a pointer to some user-defined data to be passed to
1135 # If not NULL, CURRENT_OBJFILE corresponds to the objfile being
1136 # inspected when the symbol search was requested.
1137 m
;void
;iterate_over_objfiles_in_search_order
;iterate_over_objfiles_in_search_order_cb_ftype
*cb
, void
*cb_data
, struct objfile
*current_objfile
;cb
, cb_data
, current_objfile
;0;default_iterate_over_objfiles_in_search_order
;;0
1139 # Ravenscar arch-dependent ops.
1140 v
;struct ravenscar_arch_ops
*;ravenscar_ops
;;;NULL
;NULL
;;0;host_address_to_string
(gdbarch-
>ravenscar_ops
)
1142 # Return non-zero if the instruction at ADDR is a call; zero otherwise.
1143 m
;int
;insn_is_call
;CORE_ADDR addr
;addr
;;default_insn_is_call
;;0
1145 # Return non-zero if the instruction at ADDR is a return; zero otherwise.
1146 m
;int
;insn_is_ret
;CORE_ADDR addr
;addr
;;default_insn_is_ret
;;0
1148 # Return non-zero if the instruction at ADDR is a jump; zero otherwise.
1149 m
;int
;insn_is_jump
;CORE_ADDR addr
;addr
;;default_insn_is_jump
;;0
1151 # Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
1152 # Return 0 if *READPTR is already at the end of the buffer.
1153 # Return -1 if there is insufficient buffer for a whole entry.
1154 # Return 1 if an entry was read into *TYPEP and *VALP.
1155 M
;int
;auxv_parse
;gdb_byte
**readptr
, gdb_byte
*endptr
, CORE_ADDR
*typep
, CORE_ADDR
*valp
;readptr
, endptr
, typep
, valp
1157 # Print the description of a single auxv entry described by TYPE and VAL
1159 m
;void
;print_auxv_entry
;struct ui_file
*file, CORE_ADDR
type, CORE_ADDR val
;file, type, val
;;default_print_auxv_entry
;;0
1161 # Find the address range of the current inferior's vsyscall/vDSO, and
1162 # write it to *RANGE. If the vsyscall's length can't be determined, a
1163 # range with zero length is returned. Returns true if the vsyscall is
1164 # found, false otherwise.
1165 m
;int
;vsyscall_range
;struct mem_range
*range
;range
;;default_vsyscall_range
;;0
1167 # Allocate SIZE bytes of PROT protected page aligned memory in inferior.
1168 # PROT has GDB_MMAP_PROT_* bitmask format.
1169 # Throw an error if it is not possible. Returned address is always valid.
1170 f
;CORE_ADDR
;infcall_mmap
;CORE_ADDR size
, unsigned prot
;size
, prot
;;default_infcall_mmap
;;0
1172 # Deallocate SIZE bytes of memory at ADDR in inferior from gdbarch_infcall_mmap.
1173 # Print a warning if it is not possible.
1174 f
;void
;infcall_munmap
;CORE_ADDR addr
, CORE_ADDR size
;addr
, size
;;default_infcall_munmap
;;0
1176 # Return string (caller has to use xfree for it) with options for GCC
1177 # to produce code for this target, typically "-m64", "-m32" or "-m31".
1178 # These options are put before CU's DW_AT_producer compilation options so that
1179 # they can override it. Method may also return NULL.
1180 m
;char
*;gcc_target_options
;void
;;;default_gcc_target_options
;;0
1182 # Return a regular expression that matches names used by this
1183 # architecture in GNU configury triplets. The result is statically
1184 # allocated and must not be freed. The default implementation simply
1185 # returns the BFD architecture name, which is correct in nearly every
1187 m
;const char
*;gnu_triplet_regexp
;void
;;;default_gnu_triplet_regexp
;;0
1189 # Return the size in 8-bit bytes of an addressable memory unit on this
1190 # architecture. This corresponds to the number of 8-bit bytes associated to
1191 # each address in memory.
1192 m
;int
;addressable_memory_unit_size
;void
;;;default_addressable_memory_unit_size
;;0
1194 # Functions for allowing a target to modify its disassembler options.
1195 v
;const char
*;disassembler_options_implicit
;;;0;0;;0;pstring
(gdbarch-
>disassembler_options_implicit
)
1196 v
;char
**;disassembler_options
;;;0;0;;0;pstring_ptr
(gdbarch-
>disassembler_options
)
1197 v
;const disasm_options_and_args_t
*;valid_disassembler_options
;;;0;0;;0;host_address_to_string
(gdbarch-
>valid_disassembler_options
)
1200 m
;ULONGEST
;type_align
;struct
type *type;type;;default_type_align
;;0
1208 exec > new-gdbarch.log
1209 function_list |
while do_read
1212 ${class} ${returntype} ${function} ($formal)
1216 eval echo \"\ \ \ \
${r}=\
${${r}}\"
1218 if class_is_predicate_p
&& fallback_default_p
1220 echo "Error: predicate function ${function} can not have a non- multi-arch default" 1>&2
1224 if [ "x${invalid_p}" = "x0" -a -n "${postdefault}" ]
1226 echo "Error: postdefault is useless when invalid_p=0" 1>&2
1230 if class_is_multiarch_p
1232 if class_is_predicate_p
; then :
1233 elif test "x${predefault}" = "x"
1235 echo "Error: pure multi-arch function ${function} must have a predefault" 1>&2
1244 compare_new gdbarch.log
1250 /* *INDENT-OFF* */ /* THIS FILE IS GENERATED -*- buffer-read-only: t -*- */
1253 /* Dynamic architecture support for GDB, the GNU debugger.
1255 Copyright (C) 1998-2019 Free Software Foundation, Inc.
1257 This file is part of GDB.
1259 This program is free software; you can redistribute it and/or modify
1260 it under the terms of the GNU General Public License as published by
1261 the Free Software Foundation; either version 3 of the License, or
1262 (at your option) any later version.
1264 This program is distributed in the hope that it will be useful,
1265 but WITHOUT ANY WARRANTY; without even the implied warranty of
1266 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
1267 GNU General Public License for more details.
1269 You should have received a copy of the GNU General Public License
1270 along with this program. If not, see <http://www.gnu.org/licenses/>. */
1272 /* This file was created with the aid of \`\`gdbarch.sh''.
1274 The Bourne shell script \`\`gdbarch.sh'' creates the files
1275 \`\`new-gdbarch.c'' and \`\`new-gdbarch.h and then compares them
1276 against the existing \`\`gdbarch.[hc]''. Any differences found
1279 If editing this file, please also run gdbarch.sh and merge any
1280 changes into that script. Conversely, when making sweeping changes
1281 to this file, modifying gdbarch.sh and using its output may prove
1291 exec > new-gdbarch.h
1299 #include "dis-asm.h"
1300 #include "gdb_obstack.h"
1307 struct minimal_symbol;
1311 struct disassemble_info;
1314 struct bp_target_info;
1317 struct displaced_step_closure;
1321 struct stap_parse_info;
1322 struct parser_state;
1323 struct ravenscar_arch_ops;
1325 struct syscalls_info;
1329 #include "regcache.h"
1331 /* The architecture associated with the inferior through the
1332 connection to the target.
1334 The architecture vector provides some information that is really a
1335 property of the inferior, accessed through a particular target:
1336 ptrace operations; the layout of certain RSP packets; the solib_ops
1337 vector; etc. To differentiate architecture accesses to
1338 per-inferior/target properties from
1339 per-thread/per-frame/per-objfile properties, accesses to
1340 per-inferior/target properties should be made through this
1343 /* This is a convenience wrapper for 'current_inferior ()->gdbarch'. */
1344 extern struct gdbarch *target_gdbarch (void);
1346 /* Callback type for the 'iterate_over_objfiles_in_search_order'
1349 typedef int (iterate_over_objfiles_in_search_order_cb_ftype)
1350 (struct objfile *objfile, void *cb_data);
1352 /* Callback type for regset section iterators. The callback usually
1353 invokes the REGSET's supply or collect method, to which it must
1354 pass a buffer - for collects this buffer will need to be created using
1355 COLLECT_SIZE, for supply the existing buffer being read from should
1356 be at least SUPPLY_SIZE. SECT_NAME is a BFD section name, and HUMAN_NAME
1357 is used for diagnostic messages. CB_DATA should have been passed
1358 unchanged through the iterator. */
1360 typedef void (iterate_over_regset_sections_cb)
1361 (const char *sect_name, int supply_size, int collect_size,
1362 const struct regset *regset, const char *human_name, void *cb_data);
1364 /* For a function call, does the function return a value using a
1365 normal value return or a structure return - passing a hidden
1366 argument pointing to storage. For the latter, there are two
1367 cases: language-mandated structure return and target ABI
1368 structure return. */
1370 enum function_call_return_method
1372 /* Standard value return. */
1373 return_method_normal = 0,
1375 /* Language ABI structure return. This is handled
1376 by passing the return location as the first parameter to
1377 the function, even preceding "this". */
1378 return_method_hidden_param,
1380 /* Target ABI struct return. This is target-specific; for instance,
1381 on ia64 the first argument is passed in out0 but the hidden
1382 structure return pointer would normally be passed in r8. */
1383 return_method_struct,
1388 # function typedef's
1391 printf "/* The following are pre-initialized by GDBARCH. */\n"
1392 function_list |
while do_read
1397 printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);\n"
1398 printf "/* set_gdbarch_${function}() - not applicable - pre-initialized. */\n"
1402 # function typedef's
1405 printf "/* The following are initialized by the target dependent code. */\n"
1406 function_list |
while do_read
1408 if [ -n "${comment}" ]
1410 echo "${comment}" |
sed \
1416 if class_is_predicate_p
1419 printf "extern int gdbarch_${function}_p (struct gdbarch *gdbarch);\n"
1421 if class_is_variable_p
1424 printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);\n"
1425 printf "extern void set_gdbarch_${function} (struct gdbarch *gdbarch, ${returntype} ${function});\n"
1427 if class_is_function_p
1430 if [ "x${formal}" = "xvoid" ] && class_is_multiarch_p
1432 printf "typedef ${returntype} (gdbarch_${function}_ftype) (struct gdbarch *gdbarch);\n"
1433 elif class_is_multiarch_p
1435 printf "typedef ${returntype} (gdbarch_${function}_ftype) (struct gdbarch *gdbarch, ${formal});\n"
1437 printf "typedef ${returntype} (gdbarch_${function}_ftype) (${formal});\n"
1439 if [ "x${formal}" = "xvoid" ]
1441 printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch);\n"
1443 printf "extern ${returntype} gdbarch_${function} (struct gdbarch *gdbarch, ${formal});\n"
1445 printf "extern void set_gdbarch_${function} (struct gdbarch *gdbarch, gdbarch_${function}_ftype *${function});\n"
1452 extern struct gdbarch_tdep *gdbarch_tdep (struct gdbarch *gdbarch);
1455 /* Mechanism for co-ordinating the selection of a specific
1458 GDB targets (*-tdep.c) can register an interest in a specific
1459 architecture. Other GDB components can register a need to maintain
1460 per-architecture data.
1462 The mechanisms below ensures that there is only a loose connection
1463 between the set-architecture command and the various GDB
1464 components. Each component can independently register their need
1465 to maintain architecture specific data with gdbarch.
1469 Previously, a single TARGET_ARCHITECTURE_HOOK was provided. It
1472 The more traditional mega-struct containing architecture specific
1473 data for all the various GDB components was also considered. Since
1474 GDB is built from a variable number of (fairly independent)
1475 components it was determined that the global aproach was not
1479 /* Register a new architectural family with GDB.
1481 Register support for the specified ARCHITECTURE with GDB. When
1482 gdbarch determines that the specified architecture has been
1483 selected, the corresponding INIT function is called.
1487 The INIT function takes two parameters: INFO which contains the
1488 information available to gdbarch about the (possibly new)
1489 architecture; ARCHES which is a list of the previously created
1490 \`\`struct gdbarch'' for this architecture.
1492 The INFO parameter is, as far as possible, be pre-initialized with
1493 information obtained from INFO.ABFD or the global defaults.
1495 The ARCHES parameter is a linked list (sorted most recently used)
1496 of all the previously created architures for this architecture
1497 family. The (possibly NULL) ARCHES->gdbarch can used to access
1498 values from the previously selected architecture for this
1499 architecture family.
1501 The INIT function shall return any of: NULL - indicating that it
1502 doesn't recognize the selected architecture; an existing \`\`struct
1503 gdbarch'' from the ARCHES list - indicating that the new
1504 architecture is just a synonym for an earlier architecture (see
1505 gdbarch_list_lookup_by_info()); a newly created \`\`struct gdbarch''
1506 - that describes the selected architecture (see gdbarch_alloc()).
1508 The DUMP_TDEP function shall print out all target specific values.
1509 Care should be taken to ensure that the function works in both the
1510 multi-arch and non- multi-arch cases. */
1514 struct gdbarch *gdbarch;
1515 struct gdbarch_list *next;
1520 /* Use default: NULL (ZERO). */
1521 const struct bfd_arch_info *bfd_arch_info;
1523 /* Use default: BFD_ENDIAN_UNKNOWN (NB: is not ZERO). */
1524 enum bfd_endian byte_order;
1526 enum bfd_endian byte_order_for_code;
1528 /* Use default: NULL (ZERO). */
1531 /* Use default: NULL (ZERO). */
1534 /* Architecture-specific information. The generic form for targets
1535 that have extra requirements. */
1536 struct gdbarch_tdep_info *tdep_info;
1538 /* Architecture-specific target description data. Numerous targets
1539 need only this, so give them an easy way to hold it. */
1540 struct tdesc_arch_data *tdesc_data;
1542 /* SPU file system ID. This is a single integer, so using the
1543 generic form would only complicate code. Other targets may
1544 reuse this member if suitable. */
1548 /* Use default: GDB_OSABI_UNINITIALIZED (-1). */
1549 enum gdb_osabi osabi;
1551 /* Use default: NULL (ZERO). */
1552 const struct target_desc *target_desc;
1555 typedef struct gdbarch *(gdbarch_init_ftype) (struct gdbarch_info info, struct gdbarch_list *arches);
1556 typedef void (gdbarch_dump_tdep_ftype) (struct gdbarch *gdbarch, struct ui_file *file);
1558 /* DEPRECATED - use gdbarch_register() */
1559 extern void register_gdbarch_init (enum bfd_architecture architecture, gdbarch_init_ftype *);
1561 extern void gdbarch_register (enum bfd_architecture architecture,
1562 gdbarch_init_ftype *,
1563 gdbarch_dump_tdep_ftype *);
1566 /* Return a freshly allocated, NULL terminated, array of the valid
1567 architecture names. Since architectures are registered during the
1568 _initialize phase this function only returns useful information
1569 once initialization has been completed. */
1571 extern const char **gdbarch_printable_names (void);
1574 /* Helper function. Search the list of ARCHES for a GDBARCH that
1575 matches the information provided by INFO. */
1577 extern struct gdbarch_list *gdbarch_list_lookup_by_info (struct gdbarch_list *arches, const struct gdbarch_info *info);
1580 /* Helper function. Create a preliminary \`\`struct gdbarch''. Perform
1581 basic initialization using values obtained from the INFO and TDEP
1582 parameters. set_gdbarch_*() functions are called to complete the
1583 initialization of the object. */
1585 extern struct gdbarch *gdbarch_alloc (const struct gdbarch_info *info, struct gdbarch_tdep *tdep);
1588 /* Helper function. Free a partially-constructed \`\`struct gdbarch''.
1589 It is assumed that the caller freeds the \`\`struct
1592 extern void gdbarch_free (struct gdbarch *);
1594 /* Get the obstack owned by ARCH. */
1596 extern obstack *gdbarch_obstack (gdbarch *arch);
1598 /* Helper function. Allocate memory from the \`\`struct gdbarch''
1599 obstack. The memory is freed when the corresponding architecture
1602 #define GDBARCH_OBSTACK_CALLOC(GDBARCH, NR, TYPE) \
1603 obstack_calloc<TYPE> (gdbarch_obstack ((GDBARCH)), (NR))
1605 #define GDBARCH_OBSTACK_ZALLOC(GDBARCH, TYPE) \
1606 obstack_zalloc<TYPE> (gdbarch_obstack ((GDBARCH)))
1608 /* Duplicate STRING, returning an equivalent string that's allocated on the
1609 obstack associated with GDBARCH. The string is freed when the corresponding
1610 architecture is also freed. */
1612 extern char *gdbarch_obstack_strdup (struct gdbarch *arch, const char *string);
1614 /* Helper function. Force an update of the current architecture.
1616 The actual architecture selected is determined by INFO, \`\`(gdb) set
1617 architecture'' et.al., the existing architecture and BFD's default
1618 architecture. INFO should be initialized to zero and then selected
1619 fields should be updated.
1621 Returns non-zero if the update succeeds. */
1623 extern int gdbarch_update_p (struct gdbarch_info info);
1626 /* Helper function. Find an architecture matching info.
1628 INFO should be initialized using gdbarch_info_init, relevant fields
1629 set, and then finished using gdbarch_info_fill.
1631 Returns the corresponding architecture, or NULL if no matching
1632 architecture was found. */
1634 extern struct gdbarch *gdbarch_find_by_info (struct gdbarch_info info);
1637 /* Helper function. Set the target gdbarch to "gdbarch". */
1639 extern void set_target_gdbarch (struct gdbarch *gdbarch);
1642 /* Register per-architecture data-pointer.
1644 Reserve space for a per-architecture data-pointer. An identifier
1645 for the reserved data-pointer is returned. That identifer should
1646 be saved in a local static variable.
1648 Memory for the per-architecture data shall be allocated using
1649 gdbarch_obstack_zalloc. That memory will be deleted when the
1650 corresponding architecture object is deleted.
1652 When a previously created architecture is re-selected, the
1653 per-architecture data-pointer for that previous architecture is
1654 restored. INIT() is not re-called.
1656 Multiple registrarants for any architecture are allowed (and
1657 strongly encouraged). */
1659 struct gdbarch_data;
1661 typedef void *(gdbarch_data_pre_init_ftype) (struct obstack *obstack);
1662 extern struct gdbarch_data *gdbarch_data_register_pre_init (gdbarch_data_pre_init_ftype *init);
1663 typedef void *(gdbarch_data_post_init_ftype) (struct gdbarch *gdbarch);
1664 extern struct gdbarch_data *gdbarch_data_register_post_init (gdbarch_data_post_init_ftype *init);
1665 extern void deprecated_set_gdbarch_data (struct gdbarch *gdbarch,
1666 struct gdbarch_data *data,
1669 extern void *gdbarch_data (struct gdbarch *gdbarch, struct gdbarch_data *);
1672 /* Set the dynamic target-system-dependent parameters (architecture,
1673 byte-order, ...) using information found in the BFD. */
1675 extern void set_gdbarch_from_file (bfd *);
1678 /* Initialize the current architecture to the "first" one we find on
1681 extern void initialize_current_architecture (void);
1683 /* gdbarch trace variable */
1684 extern unsigned int gdbarch_debug;
1686 extern void gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file);
1688 /* Return the number of cooked registers (raw + pseudo) for ARCH. */
1691 gdbarch_num_cooked_regs (gdbarch *arch)
1693 return gdbarch_num_regs (arch) + gdbarch_num_pseudo_regs (arch);
1699 #../move-if-change new-gdbarch.h gdbarch.h
1700 compare_new gdbarch.h
1707 exec > new-gdbarch.c
1712 #include "arch-utils.h"
1715 #include "inferior.h"
1718 #include "floatformat.h"
1719 #include "reggroups.h"
1721 #include "gdb_obstack.h"
1722 #include "observable.h"
1723 #include "regcache.h"
1724 #include "objfiles.h"
1726 #include "frame-unwind.h"
1727 #include "dummy-frame.h"
1729 /* Static function declarations */
1731 static void alloc_gdbarch_data (struct gdbarch *);
1733 /* Non-zero if we want to trace architecture code. */
1735 #ifndef GDBARCH_DEBUG
1736 #define GDBARCH_DEBUG 0
1738 unsigned int gdbarch_debug = GDBARCH_DEBUG;
1740 show_gdbarch_debug (struct ui_file *file, int from_tty,
1741 struct cmd_list_element *c, const char *value)
1743 fprintf_filtered (file, _("Architecture debugging is %s.\\n"), value);
1747 pformat (const struct floatformat **format)
1752 /* Just print out one of them - this is only for diagnostics. */
1753 return format[0]->name;
1757 pstring (const char *string)
1765 pstring_ptr (char **string)
1767 if (string == NULL || *string == NULL)
1772 /* Helper function to print a list of strings, represented as "const
1773 char *const *". The list is printed comma-separated. */
1776 pstring_list (const char *const *list)
1778 static char ret[100];
1779 const char *const *p;
1786 for (p = list; *p != NULL && offset < sizeof (ret); ++p)
1788 size_t s = xsnprintf (ret + offset, sizeof (ret) - offset, "%s, ", *p);
1794 gdb_assert (offset - 2 < sizeof (ret));
1795 ret[offset - 2] = '\0';
1803 # gdbarch open the gdbarch object
1805 printf "/* Maintain the struct gdbarch object. */\n"
1807 printf "struct gdbarch\n"
1809 printf " /* Has this architecture been fully initialized? */\n"
1810 printf " int initialized_p;\n"
1812 printf " /* An obstack bound to the lifetime of the architecture. */\n"
1813 printf " struct obstack *obstack;\n"
1815 printf " /* basic architectural information. */\n"
1816 function_list |
while do_read
1820 printf " ${returntype} ${function};\n"
1824 printf " /* target specific vector. */\n"
1825 printf " struct gdbarch_tdep *tdep;\n"
1826 printf " gdbarch_dump_tdep_ftype *dump_tdep;\n"
1828 printf " /* per-architecture data-pointers. */\n"
1829 printf " unsigned nr_data;\n"
1830 printf " void **data;\n"
1833 /* Multi-arch values.
1835 When extending this structure you must:
1837 Add the field below.
1839 Declare set/get functions and define the corresponding
1842 gdbarch_alloc(): If zero/NULL is not a suitable default,
1843 initialize the new field.
1845 verify_gdbarch(): Confirm that the target updated the field
1848 gdbarch_dump(): Add a fprintf_unfiltered call so that the new
1851 get_gdbarch(): Implement the set/get functions (probably using
1852 the macro's as shortcuts).
1857 function_list |
while do_read
1859 if class_is_variable_p
1861 printf " ${returntype} ${function};\n"
1862 elif class_is_function_p
1864 printf " gdbarch_${function}_ftype *${function};\n"
1869 # Create a new gdbarch struct
1872 /* Create a new \`\`struct gdbarch'' based on information provided by
1873 \`\`struct gdbarch_info''. */
1878 gdbarch_alloc (const struct gdbarch_info *info,
1879 struct gdbarch_tdep *tdep)
1881 struct gdbarch *gdbarch;
1883 /* Create an obstack for allocating all the per-architecture memory,
1884 then use that to allocate the architecture vector. */
1885 struct obstack *obstack = XNEW (struct obstack);
1886 obstack_init (obstack);
1887 gdbarch = XOBNEW (obstack, struct gdbarch);
1888 memset (gdbarch, 0, sizeof (*gdbarch));
1889 gdbarch->obstack = obstack;
1891 alloc_gdbarch_data (gdbarch);
1893 gdbarch->tdep = tdep;
1896 function_list |
while do_read
1900 printf " gdbarch->${function} = info->${function};\n"
1904 printf " /* Force the explicit initialization of these. */\n"
1905 function_list |
while do_read
1907 if class_is_function_p || class_is_variable_p
1909 if [ -n "${predefault}" -a "x${predefault}" != "x0" ]
1911 printf " gdbarch->${function} = ${predefault};\n"
1916 /* gdbarch_alloc() */
1922 # Free a gdbarch struct.
1927 obstack *gdbarch_obstack (gdbarch *arch)
1929 return arch->obstack;
1932 /* See gdbarch.h. */
1935 gdbarch_obstack_strdup (struct gdbarch *arch, const char *string)
1937 return obstack_strdup (arch->obstack, string);
1941 /* Free a gdbarch struct. This should never happen in normal
1942 operation --- once you've created a gdbarch, you keep it around.
1943 However, if an architecture's init function encounters an error
1944 building the structure, it may need to clean up a partially
1945 constructed gdbarch. */
1948 gdbarch_free (struct gdbarch *arch)
1950 struct obstack *obstack;
1952 gdb_assert (arch != NULL);
1953 gdb_assert (!arch->initialized_p);
1954 obstack = arch->obstack;
1955 obstack_free (obstack, 0); /* Includes the ARCH. */
1960 # verify a new architecture
1964 /* Ensure that all values in a GDBARCH are reasonable. */
1967 verify_gdbarch (struct gdbarch *gdbarch)
1972 if (gdbarch->byte_order == BFD_ENDIAN_UNKNOWN)
1973 log.puts ("\n\tbyte-order");
1974 if (gdbarch->bfd_arch_info == NULL)
1975 log.puts ("\n\tbfd_arch_info");
1976 /* Check those that need to be defined for the given multi-arch level. */
1978 function_list |
while do_read
1980 if class_is_function_p || class_is_variable_p
1982 if [ "x${invalid_p}" = "x0" ]
1984 printf " /* Skip verify of ${function}, invalid_p == 0 */\n"
1985 elif class_is_predicate_p
1987 printf " /* Skip verify of ${function}, has predicate. */\n"
1988 # FIXME: See do_read for potential simplification
1989 elif [ -n "${invalid_p}" -a -n "${postdefault}" ]
1991 printf " if (${invalid_p})\n"
1992 printf " gdbarch->${function} = ${postdefault};\n"
1993 elif [ -n "${predefault}" -a -n "${postdefault}" ]
1995 printf " if (gdbarch->${function} == ${predefault})\n"
1996 printf " gdbarch->${function} = ${postdefault};\n"
1997 elif [ -n "${postdefault}" ]
1999 printf " if (gdbarch->${function} == 0)\n"
2000 printf " gdbarch->${function} = ${postdefault};\n"
2001 elif [ -n "${invalid_p}" ]
2003 printf " if (${invalid_p})\n"
2004 printf " log.puts (\"\\\\n\\\\t${function}\");\n"
2005 elif [ -n "${predefault}" ]
2007 printf " if (gdbarch->${function} == ${predefault})\n"
2008 printf " log.puts (\"\\\\n\\\\t${function}\");\n"
2014 internal_error (__FILE__, __LINE__,
2015 _("verify_gdbarch: the following are invalid ...%s"),
2020 # dump the structure
2024 /* Print out the details of the current architecture. */
2027 gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file)
2029 const char *gdb_nm_file = "<not-defined>";
2031 #if defined (GDB_NM_FILE)
2032 gdb_nm_file = GDB_NM_FILE;
2034 fprintf_unfiltered (file,
2035 "gdbarch_dump: GDB_NM_FILE = %s\\n",
2038 function_list |
sort '-t;' -k 3 |
while do_read
2040 # First the predicate
2041 if class_is_predicate_p
2043 printf " fprintf_unfiltered (file,\n"
2044 printf " \"gdbarch_dump: gdbarch_${function}_p() = %%d\\\\n\",\n"
2045 printf " gdbarch_${function}_p (gdbarch));\n"
2047 # Print the corresponding value.
2048 if class_is_function_p
2050 printf " fprintf_unfiltered (file,\n"
2051 printf " \"gdbarch_dump: ${function} = <%%s>\\\\n\",\n"
2052 printf " host_address_to_string (gdbarch->${function}));\n"
2055 case "${print}:${returntype}" in
2058 print
="core_addr_to_string_nz (gdbarch->${function})"
2062 print
="plongest (gdbarch->${function})"
2068 printf " fprintf_unfiltered (file,\n"
2069 printf " \"gdbarch_dump: ${function} = %s\\\\n\",\n" "${fmt}"
2070 printf " ${print});\n"
2074 if (gdbarch->dump_tdep != NULL)
2075 gdbarch->dump_tdep (gdbarch, file);
2083 struct gdbarch_tdep *
2084 gdbarch_tdep (struct gdbarch *gdbarch)
2086 if (gdbarch_debug >= 2)
2087 fprintf_unfiltered (gdb_stdlog, "gdbarch_tdep called\\n");
2088 return gdbarch->tdep;
2092 function_list |
while do_read
2094 if class_is_predicate_p
2098 printf "gdbarch_${function}_p (struct gdbarch *gdbarch)\n"
2100 printf " gdb_assert (gdbarch != NULL);\n"
2101 printf " return ${predicate};\n"
2104 if class_is_function_p
2107 printf "${returntype}\n"
2108 if [ "x${formal}" = "xvoid" ]
2110 printf "gdbarch_${function} (struct gdbarch *gdbarch)\n"
2112 printf "gdbarch_${function} (struct gdbarch *gdbarch, ${formal})\n"
2115 printf " gdb_assert (gdbarch != NULL);\n"
2116 printf " gdb_assert (gdbarch->${function} != NULL);\n"
2117 if class_is_predicate_p
&& test -n "${predefault}"
2119 # Allow a call to a function with a predicate.
2120 printf " /* Do not check predicate: ${predicate}, allow call. */\n"
2122 printf " if (gdbarch_debug >= 2)\n"
2123 printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\\\\n\");\n"
2124 if [ "x${actual}" = "x-" -o "x${actual}" = "x" ]
2126 if class_is_multiarch_p
2133 if class_is_multiarch_p
2135 params
="gdbarch, ${actual}"
2140 if [ "x${returntype}" = "xvoid" ]
2142 printf " gdbarch->${function} (${params});\n"
2144 printf " return gdbarch->${function} (${params});\n"
2149 printf "set_gdbarch_${function} (struct gdbarch *gdbarch,\n"
2150 printf " `echo ${function} | sed -e 's/./ /g'` gdbarch_${function}_ftype ${function})\n"
2152 printf " gdbarch->${function} = ${function};\n"
2154 elif class_is_variable_p
2157 printf "${returntype}\n"
2158 printf "gdbarch_${function} (struct gdbarch *gdbarch)\n"
2160 printf " gdb_assert (gdbarch != NULL);\n"
2161 if [ "x${invalid_p}" = "x0" ]
2163 printf " /* Skip verify of ${function}, invalid_p == 0 */\n"
2164 elif [ -n "${invalid_p}" ]
2166 printf " /* Check variable is valid. */\n"
2167 printf " gdb_assert (!(${invalid_p}));\n"
2168 elif [ -n "${predefault}" ]
2170 printf " /* Check variable changed from pre-default. */\n"
2171 printf " gdb_assert (gdbarch->${function} != ${predefault});\n"
2173 printf " if (gdbarch_debug >= 2)\n"
2174 printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\\\\n\");\n"
2175 printf " return gdbarch->${function};\n"
2179 printf "set_gdbarch_${function} (struct gdbarch *gdbarch,\n"
2180 printf " `echo ${function} | sed -e 's/./ /g'` ${returntype} ${function})\n"
2182 printf " gdbarch->${function} = ${function};\n"
2184 elif class_is_info_p
2187 printf "${returntype}\n"
2188 printf "gdbarch_${function} (struct gdbarch *gdbarch)\n"
2190 printf " gdb_assert (gdbarch != NULL);\n"
2191 printf " if (gdbarch_debug >= 2)\n"
2192 printf " fprintf_unfiltered (gdb_stdlog, \"gdbarch_${function} called\\\\n\");\n"
2193 printf " return gdbarch->${function};\n"
2198 # All the trailing guff
2202 /* Keep a registry of per-architecture data-pointers required by GDB
2209 gdbarch_data_pre_init_ftype *pre_init;
2210 gdbarch_data_post_init_ftype *post_init;
2213 struct gdbarch_data_registration
2215 struct gdbarch_data *data;
2216 struct gdbarch_data_registration *next;
2219 struct gdbarch_data_registry
2222 struct gdbarch_data_registration *registrations;
2225 struct gdbarch_data_registry gdbarch_data_registry =
2230 static struct gdbarch_data *
2231 gdbarch_data_register (gdbarch_data_pre_init_ftype *pre_init,
2232 gdbarch_data_post_init_ftype *post_init)
2234 struct gdbarch_data_registration **curr;
2236 /* Append the new registration. */
2237 for (curr = &gdbarch_data_registry.registrations;
2239 curr = &(*curr)->next);
2240 (*curr) = XNEW (struct gdbarch_data_registration);
2241 (*curr)->next = NULL;
2242 (*curr)->data = XNEW (struct gdbarch_data);
2243 (*curr)->data->index = gdbarch_data_registry.nr++;
2244 (*curr)->data->pre_init = pre_init;
2245 (*curr)->data->post_init = post_init;
2246 (*curr)->data->init_p = 1;
2247 return (*curr)->data;
2250 struct gdbarch_data *
2251 gdbarch_data_register_pre_init (gdbarch_data_pre_init_ftype *pre_init)
2253 return gdbarch_data_register (pre_init, NULL);
2256 struct gdbarch_data *
2257 gdbarch_data_register_post_init (gdbarch_data_post_init_ftype *post_init)
2259 return gdbarch_data_register (NULL, post_init);
2262 /* Create/delete the gdbarch data vector. */
2265 alloc_gdbarch_data (struct gdbarch *gdbarch)
2267 gdb_assert (gdbarch->data == NULL);
2268 gdbarch->nr_data = gdbarch_data_registry.nr;
2269 gdbarch->data = GDBARCH_OBSTACK_CALLOC (gdbarch, gdbarch->nr_data, void *);
2272 /* Initialize the current value of the specified per-architecture
2276 deprecated_set_gdbarch_data (struct gdbarch *gdbarch,
2277 struct gdbarch_data *data,
2280 gdb_assert (data->index < gdbarch->nr_data);
2281 gdb_assert (gdbarch->data[data->index] == NULL);
2282 gdb_assert (data->pre_init == NULL);
2283 gdbarch->data[data->index] = pointer;
2286 /* Return the current value of the specified per-architecture
2290 gdbarch_data (struct gdbarch *gdbarch, struct gdbarch_data *data)
2292 gdb_assert (data->index < gdbarch->nr_data);
2293 if (gdbarch->data[data->index] == NULL)
2295 /* The data-pointer isn't initialized, call init() to get a
2297 if (data->pre_init != NULL)
2298 /* Mid architecture creation: pass just the obstack, and not
2299 the entire architecture, as that way it isn't possible for
2300 pre-init code to refer to undefined architecture
2302 gdbarch->data[data->index] = data->pre_init (gdbarch->obstack);
2303 else if (gdbarch->initialized_p
2304 && data->post_init != NULL)
2305 /* Post architecture creation: pass the entire architecture
2306 (as all fields are valid), but be careful to also detect
2307 recursive references. */
2309 gdb_assert (data->init_p);
2311 gdbarch->data[data->index] = data->post_init (gdbarch);
2315 /* The architecture initialization hasn't completed - punt -
2316 hope that the caller knows what they are doing. Once
2317 deprecated_set_gdbarch_data has been initialized, this can be
2318 changed to an internal error. */
2320 gdb_assert (gdbarch->data[data->index] != NULL);
2322 return gdbarch->data[data->index];
2326 /* Keep a registry of the architectures known by GDB. */
2328 struct gdbarch_registration
2330 enum bfd_architecture bfd_architecture;
2331 gdbarch_init_ftype *init;
2332 gdbarch_dump_tdep_ftype *dump_tdep;
2333 struct gdbarch_list *arches;
2334 struct gdbarch_registration *next;
2337 static struct gdbarch_registration *gdbarch_registry = NULL;
2340 append_name (const char ***buf, int *nr, const char *name)
2342 *buf = XRESIZEVEC (const char *, *buf, *nr + 1);
2348 gdbarch_printable_names (void)
2350 /* Accumulate a list of names based on the registed list of
2353 const char **arches = NULL;
2354 struct gdbarch_registration *rego;
2356 for (rego = gdbarch_registry;
2360 const struct bfd_arch_info *ap;
2361 ap = bfd_lookup_arch (rego->bfd_architecture, 0);
2363 internal_error (__FILE__, __LINE__,
2364 _("gdbarch_architecture_names: multi-arch unknown"));
2367 append_name (&arches, &nr_arches, ap->printable_name);
2372 append_name (&arches, &nr_arches, NULL);
2378 gdbarch_register (enum bfd_architecture bfd_architecture,
2379 gdbarch_init_ftype *init,
2380 gdbarch_dump_tdep_ftype *dump_tdep)
2382 struct gdbarch_registration **curr;
2383 const struct bfd_arch_info *bfd_arch_info;
2385 /* Check that BFD recognizes this architecture */
2386 bfd_arch_info = bfd_lookup_arch (bfd_architecture, 0);
2387 if (bfd_arch_info == NULL)
2389 internal_error (__FILE__, __LINE__,
2390 _("gdbarch: Attempt to register "
2391 "unknown architecture (%d)"),
2394 /* Check that we haven't seen this architecture before. */
2395 for (curr = &gdbarch_registry;
2397 curr = &(*curr)->next)
2399 if (bfd_architecture == (*curr)->bfd_architecture)
2400 internal_error (__FILE__, __LINE__,
2401 _("gdbarch: Duplicate registration "
2402 "of architecture (%s)"),
2403 bfd_arch_info->printable_name);
2407 fprintf_unfiltered (gdb_stdlog, "register_gdbarch_init (%s, %s)\n",
2408 bfd_arch_info->printable_name,
2409 host_address_to_string (init));
2411 (*curr) = XNEW (struct gdbarch_registration);
2412 (*curr)->bfd_architecture = bfd_architecture;
2413 (*curr)->init = init;
2414 (*curr)->dump_tdep = dump_tdep;
2415 (*curr)->arches = NULL;
2416 (*curr)->next = NULL;
2420 register_gdbarch_init (enum bfd_architecture bfd_architecture,
2421 gdbarch_init_ftype *init)
2423 gdbarch_register (bfd_architecture, init, NULL);
2427 /* Look for an architecture using gdbarch_info. */
2429 struct gdbarch_list *
2430 gdbarch_list_lookup_by_info (struct gdbarch_list *arches,
2431 const struct gdbarch_info *info)
2433 for (; arches != NULL; arches = arches->next)
2435 if (info->bfd_arch_info != arches->gdbarch->bfd_arch_info)
2437 if (info->byte_order != arches->gdbarch->byte_order)
2439 if (info->osabi != arches->gdbarch->osabi)
2441 if (info->target_desc != arches->gdbarch->target_desc)
2449 /* Find an architecture that matches the specified INFO. Create a new
2450 architecture if needed. Return that new architecture. */
2453 gdbarch_find_by_info (struct gdbarch_info info)
2455 struct gdbarch *new_gdbarch;
2456 struct gdbarch_registration *rego;
2458 /* Fill in missing parts of the INFO struct using a number of
2459 sources: "set ..."; INFOabfd supplied; and the global
2461 gdbarch_info_fill (&info);
2463 /* Must have found some sort of architecture. */
2464 gdb_assert (info.bfd_arch_info != NULL);
2468 fprintf_unfiltered (gdb_stdlog,
2469 "gdbarch_find_by_info: info.bfd_arch_info %s\n",
2470 (info.bfd_arch_info != NULL
2471 ? info.bfd_arch_info->printable_name
2473 fprintf_unfiltered (gdb_stdlog,
2474 "gdbarch_find_by_info: info.byte_order %d (%s)\n",
2476 (info.byte_order == BFD_ENDIAN_BIG ? "big"
2477 : info.byte_order == BFD_ENDIAN_LITTLE ? "little"
2479 fprintf_unfiltered (gdb_stdlog,
2480 "gdbarch_find_by_info: info.osabi %d (%s)\n",
2481 info.osabi, gdbarch_osabi_name (info.osabi));
2482 fprintf_unfiltered (gdb_stdlog,
2483 "gdbarch_find_by_info: info.abfd %s\n",
2484 host_address_to_string (info.abfd));
2485 fprintf_unfiltered (gdb_stdlog,
2486 "gdbarch_find_by_info: info.tdep_info %s\n",
2487 host_address_to_string (info.tdep_info));
2490 /* Find the tdep code that knows about this architecture. */
2491 for (rego = gdbarch_registry;
2494 if (rego->bfd_architecture == info.bfd_arch_info->arch)
2499 fprintf_unfiltered (gdb_stdlog, "gdbarch_find_by_info: "
2500 "No matching architecture\n");
2504 /* Ask the tdep code for an architecture that matches "info". */
2505 new_gdbarch = rego->init (info, rego->arches);
2507 /* Did the tdep code like it? No. Reject the change and revert to
2508 the old architecture. */
2509 if (new_gdbarch == NULL)
2512 fprintf_unfiltered (gdb_stdlog, "gdbarch_find_by_info: "
2513 "Target rejected architecture\n");
2517 /* Is this a pre-existing architecture (as determined by already
2518 being initialized)? Move it to the front of the architecture
2519 list (keeping the list sorted Most Recently Used). */
2520 if (new_gdbarch->initialized_p)
2522 struct gdbarch_list **list;
2523 struct gdbarch_list *self;
2525 fprintf_unfiltered (gdb_stdlog, "gdbarch_find_by_info: "
2526 "Previous architecture %s (%s) selected\n",
2527 host_address_to_string (new_gdbarch),
2528 new_gdbarch->bfd_arch_info->printable_name);
2529 /* Find the existing arch in the list. */
2530 for (list = ®o->arches;
2531 (*list) != NULL && (*list)->gdbarch != new_gdbarch;
2532 list = &(*list)->next);
2533 /* It had better be in the list of architectures. */
2534 gdb_assert ((*list) != NULL && (*list)->gdbarch == new_gdbarch);
2537 (*list) = self->next;
2538 /* Insert SELF at the front. */
2539 self->next = rego->arches;
2540 rego->arches = self;
2545 /* It's a new architecture. */
2547 fprintf_unfiltered (gdb_stdlog, "gdbarch_find_by_info: "
2548 "New architecture %s (%s) selected\n",
2549 host_address_to_string (new_gdbarch),
2550 new_gdbarch->bfd_arch_info->printable_name);
2552 /* Insert the new architecture into the front of the architecture
2553 list (keep the list sorted Most Recently Used). */
2555 struct gdbarch_list *self = XNEW (struct gdbarch_list);
2556 self->next = rego->arches;
2557 self->gdbarch = new_gdbarch;
2558 rego->arches = self;
2561 /* Check that the newly installed architecture is valid. Plug in
2562 any post init values. */
2563 new_gdbarch->dump_tdep = rego->dump_tdep;
2564 verify_gdbarch (new_gdbarch);
2565 new_gdbarch->initialized_p = 1;
2568 gdbarch_dump (new_gdbarch, gdb_stdlog);
2573 /* Make the specified architecture current. */
2576 set_target_gdbarch (struct gdbarch *new_gdbarch)
2578 gdb_assert (new_gdbarch != NULL);
2579 gdb_assert (new_gdbarch->initialized_p);
2580 current_inferior ()->gdbarch = new_gdbarch;
2581 gdb::observers::architecture_changed.notify (new_gdbarch);
2582 registers_changed ();
2585 /* Return the current inferior's arch. */
2588 target_gdbarch (void)
2590 return current_inferior ()->gdbarch;
2594 _initialize_gdbarch (void)
2596 add_setshow_zuinteger_cmd ("arch", class_maintenance, &gdbarch_debug, _("\\
2597 Set architecture debugging."), _("\\
2598 Show architecture debugging."), _("\\
2599 When non-zero, architecture debugging is enabled."),
2602 &setdebuglist, &showdebuglist);
2608 #../move-if-change new-gdbarch.c gdbarch.c
2609 compare_new gdbarch.c