1 # Copyright 2010, 2011 Free Software Foundation, Inc.
3 # This program is free software; you can redistribute it and/or modify
4 # it under the terms of the GNU General Public License as published by
5 # the Free Software Foundation; either version 3 of the License, or
6 # (at your option) any later version.
8 # This program is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 # GNU General Public License for more details.
13 # You should have received a copy of the GNU General Public License
14 # along with this program. If not, see <http://www.gnu.org/licenses/>.
21 if { ![istarget i?86-*-linux*] && ![istarget x86_64-*-linux* ] } {
22 verbose "Skipping system register gcore tests."
26 set testfile "system-gcore"
28 set binfile ${objdir}/${subdir}/${testfile}
30 if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
31 untested system-gcore.exp
35 # Start with a fresh gdb.
39 gdb_reinitialize_dir $srcdir/$subdir
42 # Does this gdb support gcore?
43 send_gdb "help gcore\n"
45 -re "Undefined command: .gcore.*$gdb_prompt $" {
46 # gcore command not supported -- nothing to test here.
47 unsupported "gdb does not support gcore on this target"
50 -re "Save a core file .*$gdb_prompt $" {
53 -re ".*$gdb_prompt $" {
57 fail "help gcore (timeout)"
61 if { ! [ runto_main ] } then {
62 untested system-gcore.exp
66 proc capture_command_output { command prefix } {
71 gdb_test_multiple "$command" "capture_command_output for $command" {
72 -re "${command}\[\r\n\]+${prefix}(.*)\[\r\n\]+$gdb_prompt $" {
73 set output_string $expect_out(1,string)
79 gdb_test "break terminal_func" "Breakpoint .* at .*${srcfile}, line .*" \
80 "set breakpoint at terminal_func"
82 gdb_test "continue" "Breakpoint .* terminal_func.*" \
83 "continue to terminal_func"
85 set print_prefix ".\[0123456789\]* = "
87 set pre_corefile_backtrace [capture_command_output "backtrace" ""]
88 set pre_corefile_regs [capture_command_output "info registers" ""]
89 set pre_corefile_allregs [capture_command_output "info all-reg" ""]
90 set pre_corefile_sysregs [capture_command_output "info reg system" ""]
91 set pre_corefile_static_array \
92 [capture_command_output "print static_array" "$print_prefix"]
93 set pre_corefile_uninit_array \
94 [capture_command_output "print un_initialized_array" "$print_prefix"]
95 set pre_corefile_heap_string \
96 [capture_command_output "print heap_string" "$print_prefix"]
97 set pre_corefile_local_array \
98 [capture_command_output "print array_func::local_array" "$print_prefix"]
99 set pre_corefile_extern_array \
100 [capture_command_output "print extern_array" "$print_prefix"]
102 set escapedfilename [string_to_regexp ${objdir}/${subdir}/gcore.test]
105 gdb_test_multiple "gcore ${objdir}/${subdir}/gcore.test" \
108 -re "Saved corefile ${escapedfilename}\[\r\n\]+$gdb_prompt $" {
109 pass "save a corefile"
110 global core_supported
113 -re "Can't create a corefile\[\r\n\]+$gdb_prompt $" {
114 unsupported "save a corefile"
115 global core_supported
120 if {!$core_supported} {
124 # Now restart gdb and load the corefile.
127 gdb_reinitialize_dir $srcdir/$subdir
130 send_gdb "core ${objdir}/${subdir}/gcore.test\n"
132 -re ".* is not a core dump:.*$gdb_prompt $" {
133 fail "re-load generated corefile (bad file format)"
134 # No use proceeding from here.
137 -re ".*: No such file or directory.*$gdb_prompt $" {
138 fail "re-load generated corefile (file not found)"
139 # No use proceeding from here.
142 -re ".*Couldn't find .* registers in core file.*$gdb_prompt $" {
143 fail "re-load generated corefile (incomplete note section)"
145 -re "Core was generated by .*$gdb_prompt $" {
146 pass "re-load generated corefile"
148 -re ".*$gdb_prompt $" {
149 fail "re-load generated corefile"
152 fail "re-load generated corefile (timeout)"
156 gdb_test_sequence "where" "where in corefile" {
157 "\[\r\n\]+#0 .* terminal_func \\(\\) at "
158 "\[\r\n\]+#1 .* array_func \\(\\) at "
159 "\[\r\n\]+#2 .* factorial_func \\(value=1\\) at "
160 "\[\r\n\]+#3 .* factorial_func \\(value=2\\) at "
161 "\[\r\n\]+#4 .* factorial_func \\(value=3\\) at "
162 "\[\r\n\]+#5 .* factorial_func \\(value=4\\) at "
163 "\[\r\n\]+#6 .* factorial_func \\(value=5\\) at "
164 "\[\r\n\]+#7 .* factorial_func \\(value=6\\) at "
165 "\[\r\n\]+#8 .* main \\(.*\\) at "
168 set post_corefile_regs [capture_command_output "info registers" ""]
169 if ![string compare $pre_corefile_regs $post_corefile_regs] then {
170 pass "corefile restored general registers"
172 fail "corefile restored general registers"
175 set post_corefile_allregs [capture_command_output "info all-reg" ""]
176 if ![string compare $pre_corefile_allregs $post_corefile_allregs] then {
177 pass "corefile restored all registers"
179 fail "corefile restored all registers"
182 set post_corefile_sysregs [capture_command_output "info reg system" ""]
183 if ![string compare $pre_corefile_sysregs $post_corefile_sysregs] then {
184 pass "corefile restored system registers"
186 fail "corefile restored system registers"
189 set post_corefile_extern_array \
190 [capture_command_output "print extern_array" "$print_prefix"]
191 if ![string compare $pre_corefile_extern_array $post_corefile_extern_array] {
192 pass "corefile restored extern array"
194 fail "corefile restored extern array"
197 set post_corefile_static_array \
198 [capture_command_output "print static_array" "$print_prefix"]
199 if ![string compare $pre_corefile_static_array $post_corefile_static_array] {
200 pass "corefile restored static array"
202 fail "corefile restored static array"
205 set post_corefile_uninit_array \
206 [capture_command_output "print un_initialized_array" "$print_prefix"]
207 if ![string compare $pre_corefile_uninit_array $post_corefile_uninit_array] {
208 pass "corefile restored un-initialized array"
210 fail "corefile restored un-initialized array"
213 set post_corefile_heap_string \
214 [capture_command_output "print heap_string" "$print_prefix"]
215 if ![string compare $pre_corefile_heap_string $post_corefile_heap_string] {
216 pass "corefile restored heap array"
218 fail "corefile restored heap array"
221 set post_corefile_local_array \
222 [capture_command_output "print array_func::local_array" "$print_prefix"]
223 if ![string compare $pre_corefile_local_array $post_corefile_local_array] {
224 pass "corefile restored stack array"
226 fail "corefile restored stack array"
229 set post_corefile_backtrace [capture_command_output "backtrace" ""]
230 if ![string compare $pre_corefile_backtrace $post_corefile_backtrace] {
231 pass "corefile restored backtrace"
233 fail "corefile restored backtrace"