1 # Copyright 1998, 2007, 2008, 2009 Free Software Foundation, Inc.
3 # This program is free software; you can redistribute it and/or modify
4 # it under the terms of the GNU General Public License as published by
5 # the Free Software Foundation; either version 3 of the License, or
6 # (at your option) any later version.
8 # This program is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 # GNU General Public License for more details.
13 # You should have received a copy of the GNU General Public License
14 # along with this program. If not, see <http://www.gnu.org/licenses/>.
16 # This file was written by Michael Snyder (msnyder@cygnus.com)
18 load_lib "trace-support.exp";
29 if [istarget "m68k-*-elf"] then {
30 set srcfile gdb_c_test.c
31 set binfile [board_info target d490_binfile];
33 set testfile "actions"
34 set srcfile ${testfile}.c
35 set binfile $objdir/$subdir/$testfile
36 if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
37 executable {debug nowarnings}] != "" } {
38 untested passcount.exp
42 gdb_reinitialize_dir $srcdir/$subdir
44 # If testing on a remote host, download the source file.
45 # remote_download host $srcdir/$subdir/$srcfile
49 # define relative source line numbers:
50 # all subsequent line numbers are relative to this first one (baseline)
51 set baseline [gdb_find_recursion_test_baseline $srcfile];
52 if { $baseline == -1 } then {
53 fail "Could not find gdb_recursion_test function"
57 set testline1 [expr $baseline + 3]
60 # test "passcount" command
63 gdb_delete_tracepoints
64 set trcpt1 [gdb_gettpnum gdb_c_test];
65 set trcpt2 [gdb_gettpnum gdb_asm_test];
66 set trcpt3 [gdb_gettpnum $testline1];
67 if { $trcpt1 <= 0 || $trcpt2 <= 0 || $trcpt3 <= 0 } then {
68 fail "setting tracepoints"
72 # 4.1 passcount of specified tracepoint
74 gdb_test "info tracepoints" \
75 "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \
76 "4.1a: set three tracepoints, passcounts all zero"
78 gdb_test "passcount 2 $trcpt1" \
79 "Setting tracepoint $trcpt1.s passcount to 2" \
80 "4.1b: set 1st tracepoint's passcount to two"
82 gdb_test "info tracepoints" \
83 "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \
84 "4.1c: verify 1st tracepoint's passcount set to two"
86 gdb_test "passcount 4 $trcpt2" \
87 "Setting tracepoint $trcpt2.s passcount to 4" \
88 "4.1d: set 2nd tracepoint's passcount to four"
90 gdb_test "info tracepoints" \
91 "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \
92 "4.1c: verify 2nd tracepoint's passcount set to four"
94 # 4.2 passcount of last (default) tracepoint
96 gdb_test "passcount 6" \
97 "Setting tracepoint $trcpt3.s passcount to 6" \
98 "4.2b: set last (default) tp's passcount to six"
100 gdb_test "info tracepoints" \
101 "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+6\[\t \]+.*in gdb_recursion_test.*" \
102 "4.2b: verify last (default) tp's passcount set to six"
104 # 4.3 run until stopped explicitly by user
105 # [deferred to dynamic test section]
107 # 4.4 reset the previously set passcounts to new values
109 gdb_test "passcount 7" \
110 "Setting tracepoint $trcpt3.s passcount to 7" \
111 "4.4a: reset last (default) tp's passcount to seven"
113 gdb_test "info tracepoints" \
114 "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+7\[\t \]+.*in gdb_recursion_test.*" \
115 "4.4a: verify reset last (default) tp's passcount to seven"
117 gdb_test "passcount 5 $trcpt2" \
118 "Setting tracepoint $trcpt2.s passcount to 5" \
119 "4.4b: reset second tracepoint's passcount to five"
121 gdb_test "info tracepoints" \
122 "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+5\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+7\[\t \]+.*in gdb_recursion_test.*" \
123 "4.4c: verify reset second tracepoint's passcount to five"
125 # 4.20 <FIXME test number> passcount for "all"
127 gdb_test "passcount 3 all" \
128 ".*$trcpt1.s pass.* 3.*$trcpt2.s pass.* 3.*$trcpt3.s pass.* 3" \
129 "4.20a: set all three passcounts to three"
131 gdb_test "info tracepoints" \
132 "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*in gdb_recursion_test.*" \
133 "4.20a: set all three passcounts to three"
135 gdb_test "passcount 4 all" \
136 ".*$trcpt1.s pass.* 4.*$trcpt2.s pass.* 4.*$trcpt3.s pass.* 4" \
137 "4.20a: reset all three passcounts to four"
139 gdb_test "info tracepoints" \
140 "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \
141 "4.20b: reset all three passcounts to four"
143 # 4.5 Verify trace stops on first "satisfied" passcount
144 # [deferred to dynamic test section]
146 # 4.6 minimum passcount boundary condition
148 gdb_test "passcount 0 $trcpt1" \
149 "Setting tracepoint $trcpt1.s passcount to 0" \
150 "4.6: set passcount to zero"
152 gdb_test "info tracepoints" \
153 "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \
154 "4.6: set passcount to zero"
156 # 4.7 (test a very large passcount)
158 gdb_test "passcount 32767 $trcpt1" \
159 "Setting tracepoint $trcpt1.s passcount to 32767" \
160 "4.7: set passcount to large number (32767)"
162 gdb_test "info tracepoints" \
163 "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+32767\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \
164 "4.7: set passcount to large number (32767)"
166 # 4.8 set passcount for invalid tracepoint
168 gdb_test "passcount 1 [expr $trcpt2 + $trcpt3]" \
169 "No tracepoint number [expr $trcpt2 + $trcpt3]." \
170 "4.8: invalid tracepoint number in passcount"
173 gdb_test "help passcount" "Set the passcount for a tracepoint.*" \
174 "4.9: help passcount"