1 /* Read AIX xcoff symbol tables and convert to internal format, for GDB.
2 Copyright (C) 1986-2020 Free Software Foundation, Inc.
3 Derived from coffread.c, dbxread.c, and a lot of hacking.
4 Contributed by IBM Corporation.
6 This file is part of GDB.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 3 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program. If not, see <http://www.gnu.org/licenses/>. */
24 #include <sys/types.h>
27 #ifdef HAVE_SYS_FILE_H
33 #include "coff/internal.h"
34 #include "libcoff.h" /* FIXME, internal data from BFD */
35 #include "coff/xcoff.h"
37 #include "coff/rs6000.h"
38 #include "xcoffread.h"
42 /* FIXME: ezannoni/2004-02-13 Verify if the include below is really needed. */
45 #include "buildsym-legacy.h"
46 #include "stabsread.h"
47 #include "expression.h"
48 #include "complaints.h"
51 #include "gdb-stabs.h"
53 /* For interface with stabsread.c. */
54 #include "aout/stab_gnu.h"
57 /* We put a pointer to this structure in the read_symtab_private field
63 /* First symbol number for this file. */
67 /* Number of symbols in the section of the symbol table devoted to
68 this file's symbols (actually, the section bracketed may contain
69 more than just this file's symbols). If numsyms is 0, the only
70 reason for this thing's existence is the dependency list. Nothing
71 else will happen when it is read in. */
75 /* Position of the start of the line number information for this
77 unsigned int lineno_off
;
80 /* Remember what we deduced to be the source language of this psymtab. */
82 static enum language psymtab_language
= language_unknown
;
85 /* Simplified internal version of coff symbol table information. */
90 int c_symnum
; /* Symbol number of this entry. */
91 int c_naux
; /* 0 if syment only, 1 if syment + auxent. */
93 unsigned char c_sclass
;
98 /* Last function's saved coff symbol `cs'. */
100 static struct coff_symbol fcn_cs_saved
;
102 static bfd
*symfile_bfd
;
104 /* Core address of start and end of text of current source file.
105 This is calculated from the first function seen after a C_FILE
109 static CORE_ADDR cur_src_end_addr
;
111 /* Core address of the end of the first object file. */
113 static CORE_ADDR first_object_file_end
;
115 /* Initial symbol-table-debug-string vector length. */
117 #define INITIAL_STABVECTOR_LENGTH 40
119 /* Size of a COFF symbol. I think it is always 18, so I'm not sure
120 there is any reason not to just use a #define, but might as well
121 ask BFD for the size and store it here, I guess. */
123 static unsigned local_symesz
;
125 struct xcoff_symfile_info
127 file_ptr min_lineno_offset
{}; /* Where in file lowest line#s are. */
128 file_ptr max_lineno_offset
{}; /* 1+last byte of line#s in file. */
130 /* Pointer to the string table. */
131 char *strtbl
= nullptr;
133 /* Pointer to debug section. */
134 char *debugsec
= nullptr;
136 /* Pointer to the a.out symbol table. */
137 char *symtbl
= nullptr;
139 /* Number of symbols in symtbl. */
140 int symtbl_num_syms
= 0;
142 /* Offset in data section to TOC anchor. */
143 CORE_ADDR toc_offset
= 0;
146 /* Key for XCOFF-associated data. */
148 static const struct objfile_key
<xcoff_symfile_info
> xcoff_objfile_data_key
;
150 /* Convenience macro to access the per-objfile XCOFF data. */
152 #define XCOFF_DATA(objfile) \
153 xcoff_objfile_data_key.get (objfile)
155 /* XCOFF names for dwarf sections. There is no compressed sections. */
157 static const struct dwarf2_debug_sections dwarf2_xcoff_names
= {
159 { ".dwabrev", NULL
},
162 { NULL
, NULL
}, /* debug_loclists */
163 /* AIX XCOFF defines one, named DWARF section for macro debug information.
164 XLC does not generate debug_macinfo for DWARF4 and below.
165 The section is assigned to debug_macro for DWARF5 and above. */
169 { NULL
, NULL
}, /* debug_str_offsets */
170 { NULL
, NULL
}, /* debug_line_str */
171 { ".dwrnges", NULL
},
172 { NULL
, NULL
}, /* debug_rnglists */
173 { ".dwpbtyp", NULL
},
174 { NULL
, NULL
}, /* debug_addr */
175 { ".dwframe", NULL
},
176 { NULL
, NULL
}, /* eh_frame */
177 { NULL
, NULL
}, /* gdb_index */
178 { NULL
, NULL
}, /* debug_names */
179 { NULL
, NULL
}, /* debug_aranges */
184 bf_notfound_complaint (void)
186 complaint (_("line numbers off, `.bf' symbol not found"));
190 ef_complaint (int arg1
)
192 complaint (_("Mismatched .ef symbol ignored starting at symnum %d"), arg1
);
196 eb_complaint (int arg1
)
198 complaint (_("Mismatched .eb symbol ignored starting at symnum %d"), arg1
);
201 static void xcoff_initial_scan (struct objfile
*, symfile_add_flags
);
203 static void scan_xcoff_symtab (minimal_symbol_reader
&,
206 static const char *xcoff_next_symbol_text (struct objfile
*);
208 static void record_include_begin (struct coff_symbol
*);
211 enter_line_range (struct subfile
*, unsigned, unsigned,
212 CORE_ADDR
, CORE_ADDR
, unsigned *);
214 static void init_stringtab (bfd
*, file_ptr
, struct objfile
*);
216 static void xcoff_symfile_init (struct objfile
*);
218 static void xcoff_new_init (struct objfile
*);
220 static void xcoff_symfile_finish (struct objfile
*);
222 static char *coff_getfilename (union internal_auxent
*, struct objfile
*);
224 static void read_symbol (struct internal_syment
*, int);
226 static int read_symbol_lineno (int);
228 static CORE_ADDR
read_symbol_nvalue (int);
230 static struct symbol
*process_xcoff_symbol (struct coff_symbol
*,
233 static void read_xcoff_symtab (struct objfile
*, legacy_psymtab
*);
236 static void add_stab_to_list (char *, struct pending_stabs
**);
239 static struct linetable
*arrange_linetable (struct linetable
*);
241 static void record_include_end (struct coff_symbol
*);
243 static void process_linenos (CORE_ADDR
, CORE_ADDR
);
246 /* Translate from a COFF section number (target_index) to a SECT_OFF_*
248 static int secnum_to_section (int, struct objfile
*);
249 static asection
*secnum_to_bfd_section (int, struct objfile
*);
251 struct find_targ_sec_arg
256 struct objfile
*objfile
;
259 static void find_targ_sec (bfd
*, asection
*, void *);
262 find_targ_sec (bfd
*abfd
, asection
*sect
, void *obj
)
264 struct find_targ_sec_arg
*args
= (struct find_targ_sec_arg
*) obj
;
265 struct objfile
*objfile
= args
->objfile
;
267 if (sect
->target_index
== args
->targ_index
)
269 /* This is the section. Figure out what SECT_OFF_* code it is. */
270 if (bfd_section_flags (sect
) & SEC_CODE
)
271 *args
->resultp
= SECT_OFF_TEXT (objfile
);
272 else if (bfd_section_flags (sect
) & SEC_LOAD
)
273 *args
->resultp
= SECT_OFF_DATA (objfile
);
275 *args
->resultp
= gdb_bfd_section_index (abfd
, sect
);
276 *args
->bfd_sect
= sect
;
280 /* Search all BFD sections for the section whose target_index is
281 equal to N_SCNUM. Set *BFD_SECT to that section. The section's
282 associated index in the objfile's section_offset table is also
285 If no match is found, *BFD_SECT is set to NULL, and *SECNUM
286 is set to the text section's number. */
289 xcoff_secnum_to_sections (int n_scnum
, struct objfile
*objfile
,
290 asection
**bfd_sect
, int *secnum
)
292 struct find_targ_sec_arg args
;
294 args
.targ_index
= n_scnum
;
295 args
.resultp
= secnum
;
296 args
.bfd_sect
= bfd_sect
;
297 args
.objfile
= objfile
;
300 *secnum
= SECT_OFF_TEXT (objfile
);
302 bfd_map_over_sections (objfile
->obfd
, find_targ_sec
, &args
);
305 /* Return the section number (SECT_OFF_*) that N_SCNUM points to. */
308 secnum_to_section (int n_scnum
, struct objfile
*objfile
)
313 xcoff_secnum_to_sections (n_scnum
, objfile
, &ignored
, &secnum
);
317 /* Return the BFD section that N_SCNUM points to. */
320 secnum_to_bfd_section (int n_scnum
, struct objfile
*objfile
)
325 xcoff_secnum_to_sections (n_scnum
, objfile
, &bfd_sect
, &ignored
);
329 /* add a given stab string into given stab vector. */
334 add_stab_to_list (char *stabname
, struct pending_stabs
**stabvector
)
336 if (*stabvector
== NULL
)
338 *stabvector
= (struct pending_stabs
*)
339 xmalloc (sizeof (struct pending_stabs
) +
340 INITIAL_STABVECTOR_LENGTH
* sizeof (char *));
341 (*stabvector
)->count
= 0;
342 (*stabvector
)->length
= INITIAL_STABVECTOR_LENGTH
;
344 else if ((*stabvector
)->count
>= (*stabvector
)->length
)
346 (*stabvector
)->length
+= INITIAL_STABVECTOR_LENGTH
;
347 *stabvector
= (struct pending_stabs
*)
348 xrealloc ((char *) *stabvector
, sizeof (struct pending_stabs
) +
349 (*stabvector
)->length
* sizeof (char *));
351 (*stabvector
)->stab
[(*stabvector
)->count
++] = stabname
;
356 /* Linenos are processed on a file-by-file basis.
360 1) xlc (IBM's native c compiler) postpones static function code
361 emission to the end of a compilation unit. This way it can
362 determine if those functions (statics) are needed or not, and
363 can do some garbage collection (I think). This makes line
364 numbers and corresponding addresses unordered, and we end up
365 with a line table like:
382 and that breaks gdb's binary search on line numbers, if the
383 above table is not sorted on line numbers. And that sort
384 should be on function based, since gcc can emit line numbers
387 10 0x100 - for the init/test part of a for stmt.
390 10 0x400 - for the increment part of a for stmt.
392 arrange_linetable() will do this sorting.
394 2) aix symbol table might look like:
396 c_file // beginning of a new file
397 .bi // beginning of include file
398 .ei // end of include file
402 basically, .bi/.ei pairs do not necessarily encapsulate
403 their scope. They need to be recorded, and processed later
404 on when we come the end of the compilation unit.
405 Include table (inclTable) and process_linenos() handle
410 /* Given a line table with function entries are marked, arrange its
411 functions in ascending order and strip off function entry markers
412 and return it in a newly created table. If the old one is good
413 enough, return the old one. */
414 /* FIXME: I think all this stuff can be replaced by just passing
415 sort_linevec = 1 to end_symtab. */
417 static struct linetable
*
418 arrange_linetable (struct linetable
*oldLineTb
)
420 int ii
, jj
, newline
, /* new line count */
421 function_count
; /* # of functions */
423 struct linetable_entry
*fentry
; /* function entry vector */
424 int fentry_size
; /* # of function entries */
425 struct linetable
*newLineTb
; /* new line table */
428 #define NUM_OF_FUNCTIONS 20
430 fentry_size
= NUM_OF_FUNCTIONS
;
431 fentry
= XNEWVEC (struct linetable_entry
, fentry_size
);
433 for (function_count
= 0, ii
= 0; ii
< oldLineTb
->nitems
; ++ii
)
435 if (oldLineTb
->item
[ii
].line
== 0)
436 { /* Function entry found. */
437 if (function_count
>= fentry_size
)
438 { /* Make sure you have room. */
440 fentry
= (struct linetable_entry
*)
442 fentry_size
* sizeof (struct linetable_entry
));
444 fentry
[function_count
].line
= ii
;
445 fentry
[function_count
].pc
= oldLineTb
->item
[ii
].pc
;
448 /* If the function was compiled with XLC, we may have to add an
449 extra line entry later. Reserve space for that. */
450 if (ii
+ 1 < oldLineTb
->nitems
451 && oldLineTb
->item
[ii
].pc
!= oldLineTb
->item
[ii
+ 1].pc
)
456 if (function_count
== 0)
461 else if (function_count
> 1)
462 std::sort (fentry
, fentry
+ function_count
,
463 [] (const linetable_entry
<e1
, const linetable_entry
& lte2
)
464 { return lte1
.pc
< lte2
.pc
; });
466 /* Allocate a new line table. */
467 newLineTb
= (struct linetable
*)
469 (sizeof (struct linetable
) +
470 (oldLineTb
->nitems
- function_count
+ extra_lines
) * sizeof (struct linetable_entry
));
472 /* If line table does not start with a function beginning, copy up until
476 if (oldLineTb
->item
[0].line
!= 0)
478 newline
< oldLineTb
->nitems
&& oldLineTb
->item
[newline
].line
; ++newline
)
479 newLineTb
->item
[newline
] = oldLineTb
->item
[newline
];
481 /* Now copy function lines one by one. */
483 for (ii
= 0; ii
< function_count
; ++ii
)
485 /* If the function was compiled with XLC, we may have to add an
486 extra line to cover the function prologue. */
487 jj
= fentry
[ii
].line
;
488 if (jj
+ 1 < oldLineTb
->nitems
489 && oldLineTb
->item
[jj
].pc
!= oldLineTb
->item
[jj
+ 1].pc
)
491 newLineTb
->item
[newline
] = oldLineTb
->item
[jj
];
492 newLineTb
->item
[newline
].line
= oldLineTb
->item
[jj
+ 1].line
;
496 for (jj
= fentry
[ii
].line
+ 1;
497 jj
< oldLineTb
->nitems
&& oldLineTb
->item
[jj
].line
!= 0;
499 newLineTb
->item
[newline
] = oldLineTb
->item
[jj
];
502 /* The number of items in the line table must include these
503 extra lines which were added in case of XLC compiled functions. */
504 newLineTb
->nitems
= oldLineTb
->nitems
- function_count
+ extra_lines
;
508 /* include file support: C_BINCL/C_EINCL pairs will be kept in the
509 following `IncludeChain'. At the end of each symtab (end_symtab),
510 we will determine if we should create additional symtab's to
511 represent if (the include files. */
514 typedef struct _inclTable
516 char *name
; /* include filename */
518 /* Offsets to the line table. end points to the last entry which is
519 part of this include file. */
522 struct subfile
*subfile
;
523 unsigned funStartLine
; /* Start line # of its function. */
527 #define INITIAL_INCLUDE_TABLE_LENGTH 20
528 static InclTable
*inclTable
; /* global include table */
529 static int inclIndx
; /* last entry to table */
530 static int inclLength
; /* table length */
531 static int inclDepth
; /* nested include depth */
533 static void allocate_include_entry (void);
536 record_include_begin (struct coff_symbol
*cs
)
540 /* In xcoff, we assume include files cannot be nested (not in .c files
541 of course, but in corresponding .s files.). */
543 /* This can happen with old versions of GCC.
544 GCC 2.3.3-930426 does not exhibit this on a test case which
545 a user said produced the message for him. */
546 complaint (_("Nested C_BINCL symbols"));
550 allocate_include_entry ();
552 inclTable
[inclIndx
].name
= cs
->c_name
;
553 inclTable
[inclIndx
].begin
= cs
->c_value
;
557 record_include_end (struct coff_symbol
*cs
)
563 complaint (_("Mismatched C_BINCL/C_EINCL pair"));
566 allocate_include_entry ();
568 pTbl
= &inclTable
[inclIndx
];
569 pTbl
->end
= cs
->c_value
;
576 allocate_include_entry (void)
578 if (inclTable
== NULL
)
580 inclTable
= XCNEWVEC (InclTable
, INITIAL_INCLUDE_TABLE_LENGTH
);
581 inclLength
= INITIAL_INCLUDE_TABLE_LENGTH
;
584 else if (inclIndx
>= inclLength
)
586 inclLength
+= INITIAL_INCLUDE_TABLE_LENGTH
;
587 inclTable
= XRESIZEVEC (InclTable
, inclTable
, inclLength
);
588 memset (inclTable
+ inclLength
- INITIAL_INCLUDE_TABLE_LENGTH
,
589 '\0', sizeof (InclTable
) * INITIAL_INCLUDE_TABLE_LENGTH
);
593 /* Global variable to pass the psymtab down to all the routines involved
594 in psymtab to symtab processing. */
595 static legacy_psymtab
*this_symtab_psymtab
;
597 /* Objfile related to this_symtab_psymtab; set at the same time. */
598 static struct objfile
*this_symtab_objfile
;
600 /* given the start and end addresses of a compilation unit (or a csect,
601 at times) process its lines and create appropriate line vectors. */
604 process_linenos (CORE_ADDR start
, CORE_ADDR end
)
608 = XCOFF_DATA (this_symtab_objfile
)->max_lineno_offset
;
610 /* subfile structure for the main compilation unit. */
611 struct subfile main_subfile
;
613 /* In the main source file, any time we see a function entry, we
614 reset this variable to function's absolute starting line number.
615 All the following line numbers in the function are relative to
616 this, and we record absolute line numbers in record_line(). */
618 unsigned int main_source_baseline
= 0;
623 ((struct symloc
*) this_symtab_psymtab
->read_symtab_private
)->lineno_off
;
625 goto return_after_cleanup
;
627 memset (&main_subfile
, '\0', sizeof (main_subfile
));
630 /* All source lines were in the main source file. None in include
633 enter_line_range (&main_subfile
, offset
, 0, start
, end
,
634 &main_source_baseline
);
638 /* There was source with line numbers in include files. */
641 coff_data (this_symtab_objfile
->obfd
)->local_linesz
;
642 main_source_baseline
= 0;
644 for (ii
= 0; ii
< inclIndx
; ++ii
)
646 struct subfile
*tmpSubfile
;
648 /* If there is main file source before include file, enter it. */
649 if (offset
< inclTable
[ii
].begin
)
652 (&main_subfile
, offset
, inclTable
[ii
].begin
- linesz
,
653 start
, 0, &main_source_baseline
);
656 if (strcmp (inclTable
[ii
].name
, get_last_source_file ()) == 0)
658 /* The entry in the include table refers to the main source
659 file. Add the lines to the main subfile. */
661 main_source_baseline
= inclTable
[ii
].funStartLine
;
663 (&main_subfile
, inclTable
[ii
].begin
, inclTable
[ii
].end
,
664 start
, 0, &main_source_baseline
);
665 inclTable
[ii
].subfile
= &main_subfile
;
669 /* Have a new subfile for the include file. */
671 tmpSubfile
= inclTable
[ii
].subfile
= XNEW (struct subfile
);
673 memset (tmpSubfile
, '\0', sizeof (struct subfile
));
674 firstLine
= &(inclTable
[ii
].funStartLine
);
676 /* Enter include file's lines now. */
677 enter_line_range (tmpSubfile
, inclTable
[ii
].begin
,
678 inclTable
[ii
].end
, start
, 0, firstLine
);
681 if (offset
<= inclTable
[ii
].end
)
682 offset
= inclTable
[ii
].end
+ linesz
;
685 /* All the include files' line have been processed at this point. Now,
686 enter remaining lines of the main file, if any left. */
687 if (offset
< max_offset
+ 1 - linesz
)
689 enter_line_range (&main_subfile
, offset
, 0, start
, end
,
690 &main_source_baseline
);
694 /* Process main file's line numbers. */
695 if (main_subfile
.line_vector
)
697 struct linetable
*lineTb
, *lv
;
699 lv
= main_subfile
.line_vector
;
701 /* Line numbers are not necessarily ordered. xlc compilation will
702 put static function to the end. */
704 struct subfile
*current_subfile
= get_current_subfile ();
705 lineTb
= arrange_linetable (lv
);
708 current_subfile
->line_vector
= (struct linetable
*)
709 xrealloc (lv
, (sizeof (struct linetable
)
710 + lv
->nitems
* sizeof (struct linetable_entry
)));
715 current_subfile
->line_vector
= lineTb
;
718 current_subfile
->line_vector_length
=
719 current_subfile
->line_vector
->nitems
;
722 /* Now, process included files' line numbers. */
724 for (ii
= 0; ii
< inclIndx
; ++ii
)
726 if (inclTable
[ii
].subfile
!= ((struct subfile
*) &main_subfile
)
727 && (inclTable
[ii
].subfile
)->line_vector
) /* Useless if!!!
730 struct linetable
*lineTb
, *lv
;
732 lv
= (inclTable
[ii
].subfile
)->line_vector
;
734 /* Line numbers are not necessarily ordered. xlc compilation will
735 put static function to the end. */
737 lineTb
= arrange_linetable (lv
);
741 /* For the same include file, we might want to have more than one
742 subfile. This happens if we have something like:
750 while foo.h including code in it. (stupid but possible)
751 Since start_subfile() looks at the name and uses an
752 existing one if finds, we need to provide a fake name and
756 start_subfile (inclTable
[ii
].name
);
759 /* Pick a fake name that will produce the same results as this
760 one when passed to deduce_language_from_filename. Kludge on
762 const char *fakename
= strrchr (inclTable
[ii
].name
, '.');
764 if (fakename
== NULL
)
766 start_subfile (fakename
);
767 xfree (get_current_subfile ()->name
);
769 struct subfile
*current_subfile
= get_current_subfile ();
770 current_subfile
->name
= xstrdup (inclTable
[ii
].name
);
775 current_subfile
->line_vector
=
776 (struct linetable
*) xrealloc
777 (lv
, (sizeof (struct linetable
)
778 + lv
->nitems
* sizeof (struct linetable_entry
)));
784 current_subfile
->line_vector
= lineTb
;
787 current_subfile
->line_vector_length
=
788 current_subfile
->line_vector
->nitems
;
789 start_subfile (pop_subfile ());
793 return_after_cleanup
:
795 /* We don't want to keep alloc/free'ing the global include file table. */
800 aix_process_linenos (struct objfile
*objfile
)
802 /* There is no linenos to read if there are only dwarf info. */
803 if (this_symtab_psymtab
== NULL
)
806 /* Process line numbers and enter them into line vector. */
807 process_linenos (get_last_source_start_addr (), cur_src_end_addr
);
811 /* Enter a given range of lines into the line vector.
812 can be called in the following two ways:
813 enter_line_range (subfile, beginoffset, endoffset,
814 startaddr, 0, firstLine) or
815 enter_line_range (subfile, beginoffset, 0,
816 startaddr, endaddr, firstLine)
818 endoffset points to the last line table entry that we should pay
822 enter_line_range (struct subfile
*subfile
, unsigned beginoffset
,
823 unsigned endoffset
, /* offsets to line table */
824 CORE_ADDR startaddr
, /* offsets to line table */
825 CORE_ADDR endaddr
, unsigned *firstLine
)
827 struct objfile
*objfile
= this_symtab_objfile
;
828 struct gdbarch
*gdbarch
= get_objfile_arch (objfile
);
829 unsigned int curoffset
;
832 struct internal_lineno int_lnno
;
833 unsigned int limit_offset
;
837 if (endoffset
== 0 && startaddr
== 0 && endaddr
== 0)
839 curoffset
= beginoffset
;
840 limit_offset
= XCOFF_DATA (objfile
)->max_lineno_offset
;
844 if (endoffset
>= limit_offset
)
846 complaint (_("Bad line table offset in C_EINCL directive"));
849 limit_offset
= endoffset
;
854 abfd
= objfile
->obfd
;
855 linesz
= coff_data (abfd
)->local_linesz
;
856 ext_lnno
= alloca (linesz
);
858 while (curoffset
<= limit_offset
)
860 bfd_seek (abfd
, curoffset
, SEEK_SET
);
861 bfd_bread (ext_lnno
, linesz
, abfd
);
862 bfd_coff_swap_lineno_in (abfd
, ext_lnno
, &int_lnno
);
864 /* Find the address this line represents. */
865 addr
= (int_lnno
.l_lnno
866 ? int_lnno
.l_addr
.l_paddr
867 : read_symbol_nvalue (int_lnno
.l_addr
.l_symndx
));
868 addr
+= objfile
->text_section_offset ();
870 if (addr
< startaddr
|| (endaddr
&& addr
>= endaddr
))
873 if (int_lnno
.l_lnno
== 0)
875 *firstLine
= read_symbol_lineno (int_lnno
.l_addr
.l_symndx
);
876 record_line (subfile
, 0, gdbarch_addr_bits_remove (gdbarch
, addr
));
880 record_line (subfile
, *firstLine
+ int_lnno
.l_lnno
,
881 gdbarch_addr_bits_remove (gdbarch
, addr
));
887 /* Save the vital information for use when closing off the current file.
888 NAME is the file name the symbols came from, START_ADDR is the first
889 text address for the file, and SIZE is the number of bytes of text. */
891 #define complete_symtab(name, start_addr) { \
892 set_last_source_file (name); \
893 set_last_source_start_addr (start_addr); \
897 /* Refill the symbol table input buffer
898 and set the variables that control fetching entries from it.
899 Reports an error if no data available.
900 This function can read past the end of the symbol table
901 (into the string table) but this does no harm. */
903 /* Create a new minimal symbol (using record_with_info).
905 Creation of all new minimal symbols should go through this function
906 rather than calling the various record functions in order
907 to make sure that all symbol addresses get properly relocated.
911 NAME - the symbol's name (but if NAME starts with a period, that
912 leading period is discarded).
913 ADDRESS - the symbol's address, prior to relocation. This function
914 relocates the address before recording the minimal symbol.
915 MS_TYPE - the symbol's type.
916 N_SCNUM - the symbol's XCOFF section number.
917 OBJFILE - the objfile associated with the minimal symbol. */
920 record_minimal_symbol (minimal_symbol_reader
&reader
,
921 const char *name
, CORE_ADDR address
,
922 enum minimal_symbol_type ms_type
,
924 struct objfile
*objfile
)
929 reader
.record_with_info (name
, address
, ms_type
,
930 secnum_to_section (n_scnum
, objfile
));
933 /* xcoff has static blocks marked in `.bs', `.es' pairs. They cannot be
934 nested. At any given time, a symbol can only be in one static block.
935 This is the base address of current static block, zero if non exists. */
937 static int static_block_base
= 0;
939 /* Section number for the current static block. */
941 static int static_block_section
= -1;
943 /* true if space for symbol name has been allocated. */
945 static int symname_alloced
= 0;
947 /* Next symbol to read. Pointer into raw seething symbol table. */
949 static char *raw_symbol
;
951 /* This is the function which stabsread.c calls to get symbol
955 xcoff_next_symbol_text (struct objfile
*objfile
)
957 struct internal_syment symbol
;
960 /* FIXME: is this the same as the passed arg? */
961 if (this_symtab_objfile
)
962 objfile
= this_symtab_objfile
;
964 bfd_coff_swap_sym_in (objfile
->obfd
, raw_symbol
, &symbol
);
967 complaint (_("Unexpected symbol continuation"));
969 /* Return something which points to '\0' and hope the symbol reading
970 code does something reasonable. */
973 else if (symbol
.n_sclass
& 0x80)
975 retval
= XCOFF_DATA (objfile
)->debugsec
+ symbol
.n_offset
;
976 raw_symbol
+= coff_data (objfile
->obfd
)->local_symesz
;
981 complaint (_("Unexpected symbol continuation"));
983 /* Return something which points to '\0' and hope the symbol reading
984 code does something reasonable. */
990 /* Read symbols for a given partial symbol table. */
993 read_xcoff_symtab (struct objfile
*objfile
, legacy_psymtab
*pst
)
995 bfd
*abfd
= objfile
->obfd
;
996 char *raw_auxptr
; /* Pointer to first raw aux entry for sym. */
997 struct xcoff_symfile_info
*xcoff
= XCOFF_DATA (objfile
);
998 char *strtbl
= xcoff
->strtbl
;
999 char *debugsec
= xcoff
->debugsec
;
1000 const char *debugfmt
= bfd_xcoff_is_xcoff64 (abfd
) ? "XCOFF64" : "XCOFF";
1002 struct internal_syment symbol
[1];
1003 union internal_auxent main_aux
;
1004 struct coff_symbol cs
[1];
1005 CORE_ADDR file_start_addr
= 0;
1006 CORE_ADDR file_end_addr
= 0;
1008 int next_file_symnum
= -1;
1009 unsigned int max_symnum
;
1010 int just_started
= 1;
1012 CORE_ADDR fcn_start_addr
= 0;
1013 enum language pst_symtab_language
;
1015 struct coff_symbol fcn_stab_saved
= { 0 };
1017 /* fcn_cs_saved is global because process_xcoff_symbol needs it. */
1018 union internal_auxent fcn_aux_saved
= main_aux
;
1019 struct context_stack
*newobj
;
1021 const char *filestring
= pst
->filename
; /* Name of the current file. */
1023 const char *last_csect_name
; /* Last seen csect's name. */
1025 this_symtab_psymtab
= pst
;
1026 this_symtab_objfile
= objfile
;
1028 /* Get the appropriate COFF "constants" related to the file we're
1030 local_symesz
= coff_data (abfd
)->local_symesz
;
1032 set_last_source_file (NULL
);
1033 last_csect_name
= 0;
1034 pst_symtab_language
= deduce_language_from_filename (filestring
);
1037 start_symtab (objfile
, filestring
, NULL
, file_start_addr
,
1038 pst_symtab_language
);
1039 record_debugformat (debugfmt
);
1040 symnum
= ((struct symloc
*) pst
->read_symtab_private
)->first_symnum
;
1042 symnum
+ ((struct symloc
*) pst
->read_symtab_private
)->numsyms
;
1043 first_object_file_end
= 0;
1045 raw_symbol
= xcoff
->symtbl
+ symnum
* local_symesz
;
1047 while (symnum
< max_symnum
)
1049 QUIT
; /* make this command interruptable. */
1051 /* READ_ONE_SYMBOL (symbol, cs, symname_alloced); */
1052 /* read one symbol into `cs' structure. After processing the
1053 whole symbol table, only string table will be kept in memory,
1054 symbol table and debug section of xcoff will be freed. Thus
1055 we can mark symbols with names in string table as
1060 /* Swap and align the symbol into a reasonable C structure. */
1061 bfd_coff_swap_sym_in (abfd
, raw_symbol
, symbol
);
1063 cs
->c_symnum
= symnum
;
1064 cs
->c_naux
= symbol
->n_numaux
;
1065 if (symbol
->n_zeroes
)
1067 symname_alloced
= 0;
1068 /* We must use the original, unswapped, name here so the name field
1069 pointed to by cs->c_name will persist throughout xcoffread. If
1070 we use the new field, it gets overwritten for each symbol. */
1071 cs
->c_name
= ((struct external_syment
*) raw_symbol
)->e
.e_name
;
1072 /* If it's exactly E_SYMNMLEN characters long it isn't
1074 if (cs
->c_name
[E_SYMNMLEN
- 1] != '\0')
1078 p
= (char *) obstack_alloc (&objfile
->objfile_obstack
,
1080 strncpy (p
, cs
->c_name
, E_SYMNMLEN
);
1081 p
[E_SYMNMLEN
] = '\0';
1083 symname_alloced
= 1;
1086 else if (symbol
->n_sclass
& 0x80)
1088 cs
->c_name
= debugsec
+ symbol
->n_offset
;
1089 symname_alloced
= 0;
1093 /* in string table */
1094 cs
->c_name
= strtbl
+ (int) symbol
->n_offset
;
1095 symname_alloced
= 1;
1097 cs
->c_value
= symbol
->n_value
;
1098 cs
->c_sclass
= symbol
->n_sclass
;
1099 cs
->c_secnum
= symbol
->n_scnum
;
1100 cs
->c_type
= (unsigned) symbol
->n_type
;
1102 raw_symbol
+= local_symesz
;
1105 /* Save addr of first aux entry. */
1106 raw_auxptr
= raw_symbol
;
1108 /* Skip all the auxents associated with this symbol. */
1109 for (ii
= symbol
->n_numaux
; ii
; --ii
)
1111 raw_symbol
+= coff_data (abfd
)->local_auxesz
;
1116 /* if symbol name starts with ".$" or "$", ignore it. */
1117 if (cs
->c_name
[0] == '$'
1118 || (cs
->c_name
[1] == '$' && cs
->c_name
[0] == '.'))
1121 if (cs
->c_symnum
== next_file_symnum
&& cs
->c_sclass
!= C_FILE
)
1123 if (get_last_source_file ())
1125 pst
->compunit_symtab
= end_symtab (cur_src_end_addr
,
1126 SECT_OFF_TEXT (objfile
));
1131 start_symtab (objfile
, "_globals_", NULL
,
1132 0, pst_symtab_language
);
1133 record_debugformat (debugfmt
);
1134 cur_src_end_addr
= first_object_file_end
;
1135 /* Done with all files, everything from here on is globals. */
1138 if (cs
->c_sclass
== C_EXT
|| cs
->c_sclass
== C_HIDEXT
||
1139 cs
->c_sclass
== C_WEAKEXT
)
1141 /* Dealing with a symbol with a csect entry. */
1143 #define CSECT(PP) ((PP)->x_csect)
1144 #define CSECT_LEN(PP) (CSECT(PP).x_scnlen.l)
1145 #define CSECT_ALIGN(PP) (SMTYP_ALIGN(CSECT(PP).x_smtyp))
1146 #define CSECT_SMTYP(PP) (SMTYP_SMTYP(CSECT(PP).x_smtyp))
1147 #define CSECT_SCLAS(PP) (CSECT(PP).x_smclas)
1149 /* Convert the auxent to something we can access.
1150 XCOFF can have more than one auxiliary entries.
1152 Actual functions will have two auxiliary entries, one to have the
1153 function size and other to have the smtype/smclass (LD/PR).
1155 c_type value of main symbol table will be set only in case of
1156 C_EXT/C_HIDEEXT/C_WEAKEXT storage class symbols.
1157 Bit 10 of type is set if symbol is a function, ie the value is set
1158 to 32(0x20). So we need to read the first function auxiliary entry
1159 which contains the size. */
1160 if (cs
->c_naux
> 1 && ISFCN (cs
->c_type
))
1162 /* a function entry point. */
1164 fcn_start_addr
= cs
->c_value
;
1166 /* save the function header info, which will be used
1167 when `.bf' is seen. */
1170 /* Convert the auxent to something we can access. */
1171 bfd_coff_swap_aux_in (abfd
, raw_auxptr
, cs
->c_type
, cs
->c_sclass
,
1172 0, cs
->c_naux
, &fcn_aux_saved
);
1175 /* Read the csect auxiliary header, which is always the last by
1177 bfd_coff_swap_aux_in (abfd
,
1179 + ((coff_data (abfd
)->local_symesz
)
1180 * (cs
->c_naux
- 1)),
1181 cs
->c_type
, cs
->c_sclass
,
1182 cs
->c_naux
- 1, cs
->c_naux
,
1185 switch (CSECT_SMTYP (&main_aux
))
1189 /* Ignore all external references. */
1193 /* A section description. */
1195 switch (CSECT_SCLAS (&main_aux
))
1201 /* A program csect is seen. We have to allocate one
1202 symbol table for each program csect. Normally gdb
1203 prefers one symtab for each source file. In case
1204 of AIX, one source file might include more than one
1205 [PR] csect, and they don't have to be adjacent in
1206 terms of the space they occupy in memory. Thus, one
1207 single source file might get fragmented in the
1208 memory and gdb's file start and end address
1209 approach does not work! GCC (and I think xlc) seem
1210 to put all the code in the unnamed program csect. */
1212 if (last_csect_name
)
1214 complete_symtab (filestring
, file_start_addr
);
1215 cur_src_end_addr
= file_end_addr
;
1216 end_symtab (file_end_addr
, SECT_OFF_TEXT (objfile
));
1219 /* Give all csects for this source file the same
1221 start_symtab (objfile
, filestring
, NULL
,
1222 0, pst_symtab_language
);
1223 record_debugformat (debugfmt
);
1226 /* If this is the very first csect seen,
1227 basically `__start'. */
1230 first_object_file_end
1231 = cs
->c_value
+ CSECT_LEN (&main_aux
);
1236 cs
->c_value
+ objfile
->text_section_offset ();
1237 file_end_addr
= file_start_addr
+ CSECT_LEN (&main_aux
);
1239 if (cs
->c_name
&& (cs
->c_name
[0] == '.' || cs
->c_name
[0] == '@'))
1240 last_csect_name
= cs
->c_name
;
1244 /* All other symbols are put into the minimal symbol
1257 /* Ignore the symbol. */
1265 switch (CSECT_SCLAS (&main_aux
))
1267 /* We never really come to this part as this case has been
1268 handled in ISFCN check above.
1269 This and other cases of XTY_LD are kept just for
1275 /* shared library function trampoline code entry point. */
1279 /* The symbols often have the same names as debug symbols for
1280 functions, and confuse lookup_symbol. */
1284 /* xlc puts each variable in a separate csect, so we get
1285 an XTY_SD for each variable. But gcc puts several
1286 variables in a csect, so that each variable only gets
1287 an XTY_LD. This will typically be XMC_RW; I suspect
1288 XMC_RO and XMC_BS might be possible too.
1289 These variables are put in the minimal symbol table
1296 /* Common symbols are put into the minimal symbol table only. */
1304 switch (cs
->c_sclass
)
1308 /* c_value field contains symnum of next .file entry in table
1309 or symnum of first global after last .file. */
1311 next_file_symnum
= cs
->c_value
;
1313 /* Complete symbol table for last object file containing
1314 debugging information. */
1316 /* Whether or not there was a csect in the previous file, we
1317 have to call `end_stabs' and `start_stabs' to reset
1318 type_vector, line_vector, etc. structures. */
1320 complete_symtab (filestring
, file_start_addr
);
1321 cur_src_end_addr
= file_end_addr
;
1322 end_symtab (file_end_addr
, SECT_OFF_TEXT (objfile
));
1325 /* XCOFF, according to the AIX 3.2 documentation, puts the
1326 filename in cs->c_name. But xlc 1.3.0.2 has decided to
1327 do things the standard COFF way and put it in the auxent.
1328 We use the auxent if the symbol is ".file" and an auxent
1329 exists, otherwise use the symbol itself. Simple
1331 if (!strcmp (cs
->c_name
, ".file") && cs
->c_naux
> 0)
1333 bfd_coff_swap_aux_in (abfd
, raw_auxptr
, cs
->c_type
, cs
->c_sclass
,
1334 0, cs
->c_naux
, &main_aux
);
1335 filestring
= coff_getfilename (&main_aux
, objfile
);
1338 filestring
= cs
->c_name
;
1341 start_symtab (objfile
, filestring
, NULL
, 0, pst_symtab_language
);
1342 record_debugformat (debugfmt
);
1343 last_csect_name
= 0;
1345 /* reset file start and end addresses. A compilation unit
1346 with no text (only data) should have zero file
1348 file_start_addr
= file_end_addr
= 0;
1352 fcn_stab_saved
= *cs
;
1356 if (strcmp (cs
->c_name
, ".bf") == 0)
1358 CORE_ADDR off
= objfile
->text_section_offset ();
1360 bfd_coff_swap_aux_in (abfd
, raw_auxptr
, cs
->c_type
, cs
->c_sclass
,
1361 0, cs
->c_naux
, &main_aux
);
1363 within_function
= 1;
1365 newobj
= push_context (0, fcn_start_addr
+ off
);
1367 newobj
->name
= define_symbol
1368 (fcn_cs_saved
.c_value
+ off
,
1369 fcn_stab_saved
.c_name
, 0, 0, objfile
);
1370 if (newobj
->name
!= NULL
)
1371 SYMBOL_SECTION (newobj
->name
) = SECT_OFF_TEXT (objfile
);
1373 else if (strcmp (cs
->c_name
, ".ef") == 0)
1375 bfd_coff_swap_aux_in (abfd
, raw_auxptr
, cs
->c_type
, cs
->c_sclass
,
1376 0, cs
->c_naux
, &main_aux
);
1378 /* The value of .ef is the address of epilogue code;
1379 not useful for gdb. */
1380 /* { main_aux.x_sym.x_misc.x_lnsz.x_lnno
1381 contains number of lines to '}' */
1383 if (outermost_context_p ())
1384 { /* We attempted to pop an empty context stack. */
1385 ef_complaint (cs
->c_symnum
);
1386 within_function
= 0;
1389 struct context_stack cstk
= pop_context ();
1390 /* Stack must be empty now. */
1391 if (!outermost_context_p ())
1393 ef_complaint (cs
->c_symnum
);
1394 within_function
= 0;
1398 finish_block (cstk
.name
, cstk
.old_blocks
,
1399 NULL
, cstk
.start_addr
,
1400 (fcn_cs_saved
.c_value
1401 + fcn_aux_saved
.x_sym
.x_misc
.x_fsize
1402 + objfile
->text_section_offset ()));
1403 within_function
= 0;
1408 /* Begin static block. */
1410 struct internal_syment static_symbol
;
1412 read_symbol (&static_symbol
, cs
->c_value
);
1413 static_block_base
= static_symbol
.n_value
;
1414 static_block_section
=
1415 secnum_to_section (static_symbol
.n_scnum
, objfile
);
1420 /* End of static block. */
1421 static_block_base
= 0;
1422 static_block_section
= -1;
1433 complaint (_("Unrecognized storage class %d."),
1448 /* beginning of include file */
1449 /* In xlc output, C_BINCL/C_EINCL pair doesn't show up in sorted
1450 order. Thus, when wee see them, we might not know enough info
1451 to process them. Thus, we'll be saving them into a table
1452 (inclTable) and postpone their processing. */
1454 record_include_begin (cs
);
1458 /* End of include file. */
1459 /* See the comment after case C_BINCL. */
1460 record_include_end (cs
);
1464 if (strcmp (cs
->c_name
, ".bb") == 0)
1467 newobj
= push_context (depth
,
1469 + objfile
->text_section_offset ()));
1471 else if (strcmp (cs
->c_name
, ".eb") == 0)
1473 if (outermost_context_p ())
1474 { /* We attempted to pop an empty context stack. */
1475 eb_complaint (cs
->c_symnum
);
1478 struct context_stack cstk
= pop_context ();
1479 if (depth
-- != cstk
.depth
)
1481 eb_complaint (cs
->c_symnum
);
1484 if (*get_local_symbols () && !outermost_context_p ())
1486 /* Make a block for the local symbols within. */
1487 finish_block (cstk
.name
,
1488 cstk
.old_blocks
, NULL
,
1491 + objfile
->text_section_offset ()));
1493 *get_local_symbols () = cstk
.locals
;
1498 process_xcoff_symbol (cs
, objfile
);
1503 if (get_last_source_file ())
1505 struct compunit_symtab
*cust
;
1507 complete_symtab (filestring
, file_start_addr
);
1508 cur_src_end_addr
= file_end_addr
;
1509 cust
= end_symtab (file_end_addr
, SECT_OFF_TEXT (objfile
));
1510 /* When reading symbols for the last C_FILE of the objfile, try
1511 to make sure that we set pst->compunit_symtab to the symtab for the
1512 file, not to the _globals_ symtab. I'm not sure whether this
1513 actually works right or when/if it comes up. */
1514 if (pst
->compunit_symtab
== NULL
)
1515 pst
->compunit_symtab
= cust
;
1520 #define SYMBOL_DUP(SYMBOL1, SYMBOL2) \
1521 (SYMBOL2) = new (&objfile->objfile_obstack) symbol (); \
1522 *(SYMBOL2) = *(SYMBOL1);
1525 #define SYMNAME_ALLOC(NAME, ALLOCED) \
1526 ((ALLOCED) ? (NAME) : obstack_strdup (&objfile->objfile_obstack, \
1530 /* process one xcoff symbol. */
1532 static struct symbol
*
1533 process_xcoff_symbol (struct coff_symbol
*cs
, struct objfile
*objfile
)
1535 struct symbol onesymbol
;
1536 struct symbol
*sym
= &onesymbol
;
1537 struct symbol
*sym2
= NULL
;
1543 if (cs
->c_secnum
< 0)
1545 /* The value is a register number, offset within a frame, etc.,
1546 and does not get relocated. */
1552 sec
= secnum_to_section (cs
->c_secnum
, objfile
);
1553 off
= objfile
->section_offsets
[sec
];
1560 initialize_objfile_symbol (sym
);
1562 /* default assumptions */
1563 SET_SYMBOL_VALUE_ADDRESS (sym
, cs
->c_value
+ off
);
1564 SYMBOL_DOMAIN (sym
) = VAR_DOMAIN
;
1565 SYMBOL_SECTION (sym
) = secnum_to_section (cs
->c_secnum
, objfile
);
1567 if (ISFCN (cs
->c_type
))
1569 /* At this point, we don't know the type of the function. This
1570 will be patched with the type from its stab entry later on in
1571 patch_block_stabs (), unless the file was compiled without -g. */
1573 sym
->set_linkage_name (SYMNAME_ALLOC (name
, symname_alloced
));
1574 SYMBOL_TYPE (sym
) = objfile_type (objfile
)->nodebug_text_symbol
;
1576 SYMBOL_ACLASS_INDEX (sym
) = LOC_BLOCK
;
1577 SYMBOL_DUP (sym
, sym2
);
1579 if (cs
->c_sclass
== C_EXT
|| C_WEAKEXT
)
1580 add_symbol_to_list (sym2
, get_global_symbols ());
1581 else if (cs
->c_sclass
== C_HIDEXT
|| cs
->c_sclass
== C_STAT
)
1582 add_symbol_to_list (sym2
, get_file_symbols ());
1586 /* In case we can't figure out the type, provide default. */
1587 SYMBOL_TYPE (sym
) = objfile_type (objfile
)->nodebug_data_symbol
;
1589 switch (cs
->c_sclass
)
1592 /* The values of functions and global symbols are now resolved
1593 via the global_sym_chain in stabsread.c. */
1595 if (fcn_cs_saved
.c_sclass
== C_EXT
)
1596 add_stab_to_list (name
, &global_stabs
);
1598 add_stab_to_list (name
, &file_stabs
);
1602 add_stab_to_list (name
, &global_stabs
);
1607 common_block_start (cs
->c_name
, objfile
);
1611 common_block_end (objfile
);
1615 complaint (_("Unexpected storage class: %d"),
1628 sym
= define_symbol (cs
->c_value
+ off
, cs
->c_name
, 0, 0, objfile
);
1631 SYMBOL_SECTION (sym
) = sec
;
1638 /* For xlc (not GCC), the 'V' symbol descriptor is used for
1639 all statics and we need to distinguish file-scope versus
1640 function-scope using within_function. We do this by
1641 changing the string we pass to define_symbol to use 'S'
1642 where we need to, which is not necessarily super-clean,
1643 but seems workable enough. */
1648 pp
= strchr (name
, ':');
1653 if (*pp
== 'V' && !within_function
)
1655 sym
= define_symbol ((cs
->c_value
1656 + objfile
->section_offsets
[static_block_section
]),
1657 cs
->c_name
, 0, 0, objfile
);
1660 SET_SYMBOL_VALUE_ADDRESS (sym
,
1661 SYMBOL_VALUE_ADDRESS (sym
)
1662 + static_block_base
);
1663 SYMBOL_SECTION (sym
) = static_block_section
;
1672 /* Extract the file name from the aux entry of a C_FILE symbol.
1673 Result is in static storage and is only good for temporary use. */
1676 coff_getfilename (union internal_auxent
*aux_entry
, struct objfile
*objfile
)
1678 static char buffer
[BUFSIZ
];
1680 if (aux_entry
->x_file
.x_n
.x_zeroes
== 0)
1681 strcpy (buffer
, (XCOFF_DATA (objfile
)->strtbl
1682 + aux_entry
->x_file
.x_n
.x_offset
));
1685 strncpy (buffer
, aux_entry
->x_file
.x_fname
, FILNMLEN
);
1686 buffer
[FILNMLEN
] = '\0';
1691 /* Set *SYMBOL to symbol number symno in symtbl. */
1693 read_symbol (struct internal_syment
*symbol
, int symno
)
1695 struct xcoff_symfile_info
*xcoff
= XCOFF_DATA (this_symtab_objfile
);
1696 int nsyms
= xcoff
->symtbl_num_syms
;
1697 char *stbl
= xcoff
->symtbl
;
1699 if (symno
< 0 || symno
>= nsyms
)
1701 complaint (_("Invalid symbol offset"));
1702 symbol
->n_value
= 0;
1703 symbol
->n_scnum
= -1;
1706 bfd_coff_swap_sym_in (this_symtab_objfile
->obfd
,
1707 stbl
+ (symno
* local_symesz
),
1711 /* Get value corresponding to symbol number symno in symtbl. */
1714 read_symbol_nvalue (int symno
)
1716 struct internal_syment symbol
[1];
1718 read_symbol (symbol
, symno
);
1719 return symbol
->n_value
;
1723 /* Find the address of the function corresponding to symno, where
1724 symno is the symbol pointed to by the linetable. */
1727 read_symbol_lineno (int symno
)
1729 struct objfile
*objfile
= this_symtab_objfile
;
1730 int xcoff64
= bfd_xcoff_is_xcoff64 (objfile
->obfd
);
1732 struct xcoff_symfile_info
*info
= XCOFF_DATA (objfile
);
1733 int nsyms
= info
->symtbl_num_syms
;
1734 char *stbl
= info
->symtbl
;
1735 char *strtbl
= info
->strtbl
;
1737 struct internal_syment symbol
[1];
1738 union internal_auxent main_aux
[1];
1742 bf_notfound_complaint ();
1746 /* Note that just searching for a short distance (e.g. 50 symbols)
1747 is not enough, at least in the following case.
1750 [many .stabx entries]
1751 [a few functions, referring to foo]
1755 What happens here is that the assembler moves the .stabx entries
1756 to right before the ".bf" for foo, but the symbol for "foo" is before
1757 all the stabx entries. See PR gdb/2222. */
1759 /* Maintaining a table of .bf entries might be preferable to this search.
1760 If I understand things correctly it would need to be done only for
1761 the duration of a single psymtab to symtab conversion. */
1762 while (symno
< nsyms
)
1764 bfd_coff_swap_sym_in (symfile_bfd
,
1765 stbl
+ (symno
* local_symesz
), symbol
);
1766 if (symbol
->n_sclass
== C_FCN
)
1768 char *name
= xcoff64
? strtbl
+ symbol
->n_offset
: symbol
->n_name
;
1770 if (strcmp (name
, ".bf") == 0)
1773 symno
+= symbol
->n_numaux
+ 1;
1776 bf_notfound_complaint ();
1780 /* Take aux entry and return its lineno. */
1782 bfd_coff_swap_aux_in (objfile
->obfd
, stbl
+ symno
* local_symesz
,
1783 symbol
->n_type
, symbol
->n_sclass
,
1784 0, symbol
->n_numaux
, main_aux
);
1786 return main_aux
->x_sym
.x_misc
.x_lnsz
.x_lnno
;
1789 /* Support for line number handling. */
1791 /* This function is called for every section; it finds the outer limits
1792 * of the line table (minimum and maximum file offset) so that the
1793 * mainline code can read the whole thing for efficiency.
1796 find_linenos (struct bfd
*abfd
, struct bfd_section
*asect
, void *vpinfo
)
1798 struct xcoff_symfile_info
*info
;
1800 file_ptr offset
, maxoff
;
1802 count
= asect
->lineno_count
;
1804 if (strcmp (asect
->name
, ".text") != 0 || count
== 0)
1807 size
= count
* coff_data (abfd
)->local_linesz
;
1808 info
= (struct xcoff_symfile_info
*) vpinfo
;
1809 offset
= asect
->line_filepos
;
1810 maxoff
= offset
+ size
;
1812 if (offset
< info
->min_lineno_offset
|| info
->min_lineno_offset
== 0)
1813 info
->min_lineno_offset
= offset
;
1815 if (maxoff
> info
->max_lineno_offset
)
1816 info
->max_lineno_offset
= maxoff
;
1820 xcoff_psymtab_to_symtab_1 (legacy_psymtab
*pst
, struct objfile
*objfile
)
1830 (gdb_stderr
, "Psymtab for %s already read in. Shouldn't happen.\n",
1835 /* Read in all partial symtabs on which this one is dependent. */
1836 for (i
= 0; i
< pst
->number_of_dependencies
; i
++)
1837 if (!pst
->dependencies
[i
]->readin
)
1839 /* Inform about additional files that need to be read in. */
1842 fputs_filtered (" ", gdb_stdout
);
1844 fputs_filtered ("and ", gdb_stdout
);
1846 printf_filtered ("%s...", pst
->dependencies
[i
]->filename
);
1847 wrap_here (""); /* Flush output */
1848 gdb_flush (gdb_stdout
);
1850 pst
->dependencies
[i
]->expand_psymtab (objfile
);
1853 if (((struct symloc
*) pst
->read_symtab_private
)->numsyms
!= 0)
1855 /* Init stuff necessary for reading in symbols. */
1858 scoped_free_pendings free_pending
;
1859 read_xcoff_symtab (objfile
, pst
);
1865 /* Read in all of the symbols for a given psymtab for real.
1866 Be verbose about it if the user wants that. SELF is not NULL. */
1869 xcoff_read_symtab (legacy_psymtab
*self
, struct objfile
*objfile
)
1871 gdb_assert (!self
->readin
);
1873 if (((struct symloc
*) self
->read_symtab_private
)->numsyms
!= 0
1874 || self
->number_of_dependencies
)
1876 next_symbol_text_func
= xcoff_next_symbol_text
;
1878 self
->expand_psymtab (objfile
);
1880 /* Match with global symbols. This only needs to be done once,
1881 after all of the symtabs and dependencies have been read in. */
1882 scan_file_globals (objfile
);
1887 xcoff_new_init (struct objfile
*objfile
)
1889 stabsread_new_init ();
1892 /* Do initialization in preparation for reading symbols from OBJFILE.
1894 We will only be called if this is an XCOFF or XCOFF-like file.
1895 BFD handles figuring out the format of the file, and code in symfile.c
1896 uses BFD's determination to vector to us. */
1899 xcoff_symfile_init (struct objfile
*objfile
)
1901 /* Allocate struct to keep track of the symfile. */
1902 xcoff_objfile_data_key
.emplace (objfile
);
1904 /* XCOFF objects may be reordered, so set OBJF_REORDERED. If we
1905 find this causes a significant slowdown in gdb then we could
1906 set it in the debug symbol readers only when necessary. */
1907 objfile
->flags
|= OBJF_REORDERED
;
1910 /* Perform any local cleanups required when we are done with a particular
1911 objfile. I.E, we are in the process of discarding all symbol information
1912 for an objfile, freeing up all memory held for it, and unlinking the
1913 objfile struct from the global list of known objfiles. */
1916 xcoff_symfile_finish (struct objfile
*objfile
)
1918 /* Start with a fresh include table for the next objfile. */
1924 inclIndx
= inclLength
= inclDepth
= 0;
1929 init_stringtab (bfd
*abfd
, file_ptr offset
, struct objfile
*objfile
)
1933 unsigned char lengthbuf
[4];
1935 struct xcoff_symfile_info
*xcoff
= XCOFF_DATA (objfile
);
1937 xcoff
->strtbl
= NULL
;
1939 if (bfd_seek (abfd
, offset
, SEEK_SET
) < 0)
1940 error (_("cannot seek to string table in %s: %s"),
1941 bfd_get_filename (abfd
), bfd_errmsg (bfd_get_error ()));
1943 val
= bfd_bread ((char *) lengthbuf
, sizeof lengthbuf
, abfd
);
1944 length
= bfd_h_get_32 (abfd
, lengthbuf
);
1946 /* If no string table is needed, then the file may end immediately
1947 after the symbols. Just return with `strtbl' set to NULL. */
1949 if (val
!= sizeof lengthbuf
|| length
< sizeof lengthbuf
)
1952 /* Allocate string table from objfile_obstack. We will need this table
1953 as long as we have its symbol table around. */
1955 strtbl
= (char *) obstack_alloc (&objfile
->objfile_obstack
, length
);
1956 xcoff
->strtbl
= strtbl
;
1958 /* Copy length buffer, the first byte is usually zero and is
1959 used for stabs with a name length of zero. */
1960 memcpy (strtbl
, lengthbuf
, sizeof lengthbuf
);
1961 if (length
== sizeof lengthbuf
)
1964 val
= bfd_bread (strtbl
+ sizeof lengthbuf
, length
- sizeof lengthbuf
, abfd
);
1966 if (val
!= length
- sizeof lengthbuf
)
1967 error (_("cannot read string table from %s: %s"),
1968 bfd_get_filename (abfd
), bfd_errmsg (bfd_get_error ()));
1969 if (strtbl
[length
- 1] != '\0')
1970 error (_("bad symbol file: string table "
1971 "does not end with null character"));
1976 /* If we have not yet seen a function for this psymtab, this is 0. If we
1977 have seen one, it is the offset in the line numbers of the line numbers
1979 static unsigned int first_fun_line_offset
;
1981 /* Allocate and partially fill a partial symtab. It will be
1982 completely filled at the end of the symbol list.
1984 SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
1985 is the address relative to which its symbols are (incremental) or 0
1988 static legacy_psymtab
*
1989 xcoff_start_psymtab (struct objfile
*objfile
,
1990 const char *filename
, int first_symnum
)
1992 /* We fill in textlow later. */
1993 legacy_psymtab
*result
= new legacy_psymtab (filename
, objfile
, 0);
1995 result
->read_symtab_private
=
1996 XOBNEW (&objfile
->objfile_obstack
, struct symloc
);
1997 ((struct symloc
*) result
->read_symtab_private
)->first_symnum
= first_symnum
;
1998 result
->legacy_read_symtab
= xcoff_read_symtab
;
1999 result
->legacy_expand_psymtab
= xcoff_psymtab_to_symtab_1
;
2001 /* Deduce the source language from the filename for this psymtab. */
2002 psymtab_language
= deduce_language_from_filename (filename
);
2007 /* Close off the current usage of PST.
2008 Returns PST, or NULL if the partial symtab was empty and thrown away.
2010 CAPPING_SYMBOL_NUMBER is the end of pst (exclusive).
2012 INCLUDE_LIST, NUM_INCLUDES, DEPENDENCY_LIST, and NUMBER_DEPENDENCIES
2013 are the information for includes and dependencies. */
2015 static legacy_psymtab
*
2016 xcoff_end_psymtab (struct objfile
*objfile
, legacy_psymtab
*pst
,
2017 const char **include_list
, int num_includes
,
2018 int capping_symbol_number
,
2019 legacy_psymtab
**dependency_list
,
2020 int number_dependencies
, int textlow_not_set
)
2024 if (capping_symbol_number
!= -1)
2025 ((struct symloc
*) pst
->read_symtab_private
)->numsyms
=
2026 capping_symbol_number
2027 - ((struct symloc
*) pst
->read_symtab_private
)->first_symnum
;
2028 ((struct symloc
*) pst
->read_symtab_private
)->lineno_off
=
2029 first_fun_line_offset
;
2030 first_fun_line_offset
= 0;
2032 end_psymtab_common (objfile
, pst
);
2034 pst
->number_of_dependencies
= number_dependencies
;
2035 if (number_dependencies
)
2038 = objfile
->partial_symtabs
->allocate_dependencies (number_dependencies
);
2039 memcpy (pst
->dependencies
, dependency_list
,
2040 number_dependencies
* sizeof (legacy_psymtab
*));
2043 pst
->dependencies
= 0;
2045 for (i
= 0; i
< num_includes
; i
++)
2047 legacy_psymtab
*subpst
=
2048 new legacy_psymtab (include_list
[i
], objfile
);
2050 subpst
->read_symtab_private
= XOBNEW (&objfile
->objfile_obstack
, symloc
);
2051 ((struct symloc
*) subpst
->read_symtab_private
)->first_symnum
= 0;
2052 ((struct symloc
*) subpst
->read_symtab_private
)->numsyms
= 0;
2054 /* We could save slight bits of space by only making one of these,
2055 shared by the entire set of include files. FIXME-someday. */
2056 subpst
->dependencies
=
2057 objfile
->partial_symtabs
->allocate_dependencies (1);
2058 subpst
->dependencies
[0] = pst
;
2059 subpst
->number_of_dependencies
= 1;
2061 subpst
->legacy_read_symtab
= pst
->legacy_read_symtab
;
2062 subpst
->legacy_expand_psymtab
= pst
->legacy_expand_psymtab
;
2065 if (num_includes
== 0
2066 && number_dependencies
== 0
2067 && pst
->n_global_syms
== 0
2068 && pst
->n_static_syms
== 0)
2070 /* Throw away this psymtab, it's empty. We can't deallocate it, since
2071 it is on the obstack, but we can forget to chain it on the list. */
2072 /* Empty psymtabs happen as a result of header files which don't have
2073 any symbols in them. There can be a lot of them. */
2075 discard_psymtab (objfile
, pst
);
2077 /* Indicate that psymtab was thrown away. */
2083 /* Swap raw symbol at *RAW and put the name in *NAME, the symbol in
2084 *SYMBOL, the first auxent in *AUX. Advance *RAW and *SYMNUMP over
2085 the symbol and its auxents. */
2088 swap_sym (struct internal_syment
*symbol
, union internal_auxent
*aux
,
2089 const char **name
, char **raw
, unsigned int *symnump
,
2090 struct objfile
*objfile
)
2092 bfd_coff_swap_sym_in (objfile
->obfd
, *raw
, symbol
);
2093 if (symbol
->n_zeroes
)
2095 /* If it's exactly E_SYMNMLEN characters long it isn't
2097 if (symbol
->n_name
[E_SYMNMLEN
- 1] != '\0')
2099 /* FIXME: wastes memory for symbols which we don't end up putting
2100 into the minimal symbols. */
2103 p
= (char *) obstack_alloc (&objfile
->objfile_obstack
,
2105 strncpy (p
, symbol
->n_name
, E_SYMNMLEN
);
2106 p
[E_SYMNMLEN
] = '\0';
2110 /* Point to the unswapped name as that persists as long as the
2112 *name
= ((struct external_syment
*) *raw
)->e
.e_name
;
2114 else if (symbol
->n_sclass
& 0x80)
2116 *name
= XCOFF_DATA (objfile
)->debugsec
+ symbol
->n_offset
;
2120 *name
= XCOFF_DATA (objfile
)->strtbl
+ symbol
->n_offset
;
2123 *raw
+= coff_data (objfile
->obfd
)->local_symesz
;
2124 if (symbol
->n_numaux
> 0)
2126 bfd_coff_swap_aux_in (objfile
->obfd
, *raw
, symbol
->n_type
,
2127 symbol
->n_sclass
, 0, symbol
->n_numaux
, aux
);
2129 *symnump
+= symbol
->n_numaux
;
2130 *raw
+= coff_data (objfile
->obfd
)->local_symesz
* symbol
->n_numaux
;
2135 function_outside_compilation_unit_complaint (const char *arg1
)
2137 complaint (_("function `%s' appears to be defined "
2138 "outside of all compilation units"),
2143 scan_xcoff_symtab (minimal_symbol_reader
&reader
,
2144 struct objfile
*objfile
)
2146 struct gdbarch
*gdbarch
= get_objfile_arch (objfile
);
2147 CORE_ADDR toc_offset
= 0; /* toc offset value in data section. */
2148 const char *filestring
= NULL
;
2150 const char *namestring
;
2155 /* Current partial symtab */
2156 legacy_psymtab
*pst
;
2158 /* List of current psymtab's include files. */
2159 const char **psymtab_include_list
;
2160 int includes_allocated
;
2163 /* Index within current psymtab dependency list. */
2164 legacy_psymtab
**dependency_list
;
2165 int dependencies_used
, dependencies_allocated
;
2168 struct internal_syment symbol
;
2169 union internal_auxent main_aux
[5];
2170 unsigned int ssymnum
;
2172 const char *last_csect_name
= NULL
; /* Last seen csect's name and value. */
2173 CORE_ADDR last_csect_val
= 0;
2174 int last_csect_sec
= 0;
2175 int misc_func_recorded
= 0; /* true if any misc. function. */
2176 int textlow_not_set
= 1;
2178 pst
= (legacy_psymtab
*) 0;
2180 includes_allocated
= 30;
2182 psymtab_include_list
= (const char **) alloca (includes_allocated
*
2183 sizeof (const char *));
2185 dependencies_allocated
= 30;
2186 dependencies_used
= 0;
2188 (legacy_psymtab
**) alloca (dependencies_allocated
*
2189 sizeof (legacy_psymtab
*));
2191 set_last_source_file (NULL
);
2193 abfd
= objfile
->obfd
;
2194 next_symbol_text_func
= xcoff_next_symbol_text
;
2196 sraw_symbol
= XCOFF_DATA (objfile
)->symtbl
;
2197 nsyms
= XCOFF_DATA (objfile
)->symtbl_num_syms
;
2199 while (ssymnum
< nsyms
)
2205 bfd_coff_swap_sym_in (abfd
, sraw_symbol
, &symbol
);
2206 sclass
= symbol
.n_sclass
;
2214 /* The CSECT auxent--always the last auxent. */
2215 union internal_auxent csect_aux
;
2216 unsigned int symnum_before
= ssymnum
;
2218 swap_sym (&symbol
, &main_aux
[0], &namestring
, &sraw_symbol
,
2220 if (symbol
.n_numaux
> 1)
2222 bfd_coff_swap_aux_in
2224 sraw_symbol
- coff_data (abfd
)->local_symesz
,
2227 symbol
.n_numaux
- 1,
2232 csect_aux
= main_aux
[0];
2234 /* If symbol name starts with ".$" or "$", ignore it. */
2235 if (namestring
[0] == '$'
2236 || (namestring
[0] == '.' && namestring
[1] == '$'))
2239 switch (csect_aux
.x_csect
.x_smtyp
& 0x7)
2242 switch (csect_aux
.x_csect
.x_smclas
)
2245 if (last_csect_name
)
2247 /* If no misc. function recorded in the last
2248 seen csect, enter it as a function. This
2249 will take care of functions like strcmp()
2252 if (!misc_func_recorded
)
2254 record_minimal_symbol
2255 (reader
, last_csect_name
, last_csect_val
,
2256 mst_text
, last_csect_sec
, objfile
);
2257 misc_func_recorded
= 1;
2262 /* We have to allocate one psymtab for
2263 each program csect, because their text
2264 sections need not be adjacent. */
2266 (objfile
, pst
, psymtab_include_list
,
2267 includes_used
, symnum_before
, dependency_list
,
2268 dependencies_used
, textlow_not_set
);
2270 dependencies_used
= 0;
2271 /* Give all psymtabs for this source file the same
2273 pst
= xcoff_start_psymtab
2279 /* Activate the misc_func_recorded mechanism for
2280 compiler- and linker-generated CSECTs like ".strcmp"
2282 if (namestring
&& (namestring
[0] == '.'
2283 || namestring
[0] == '@'))
2285 last_csect_name
= namestring
;
2286 last_csect_val
= symbol
.n_value
;
2287 last_csect_sec
= symbol
.n_scnum
;
2292 symbol
.n_value
+ csect_aux
.x_csect
.x_scnlen
.l
;
2294 if (highval
> pst
->raw_text_high ())
2295 pst
->set_text_high (highval
);
2296 if (!pst
->text_low_valid
2297 || symbol
.n_value
< pst
->raw_text_low ())
2298 pst
->set_text_low (symbol
.n_value
);
2300 misc_func_recorded
= 0;
2305 /* Data variables are recorded in the minimal symbol
2306 table, except for section symbols. */
2307 if (*namestring
!= '.')
2308 record_minimal_symbol
2309 (reader
, namestring
, symbol
.n_value
,
2310 sclass
== C_HIDEXT
? mst_file_data
: mst_data
,
2311 symbol
.n_scnum
, objfile
);
2316 warning (_("More than one XMC_TC0 symbol found."));
2317 toc_offset
= symbol
.n_value
;
2319 /* Make TOC offset relative to start address of
2321 bfd_sect
= secnum_to_bfd_section (symbol
.n_scnum
, objfile
);
2323 toc_offset
-= bfd_section_vma (bfd_sect
);
2327 /* These symbols tell us where the TOC entry for a
2328 variable is, not the variable itself. */
2337 switch (csect_aux
.x_csect
.x_smclas
)
2340 /* A function entry point. */
2342 if (first_fun_line_offset
== 0 && symbol
.n_numaux
> 1)
2343 first_fun_line_offset
=
2344 main_aux
[0].x_sym
.x_fcnary
.x_fcn
.x_lnnoptr
;
2346 record_minimal_symbol
2347 (reader
, namestring
, symbol
.n_value
,
2348 sclass
== C_HIDEXT
? mst_file_text
: mst_text
,
2349 symbol
.n_scnum
, objfile
);
2350 misc_func_recorded
= 1;
2354 /* shared library function trampoline code entry
2357 /* record trampoline code entries as
2358 mst_solib_trampoline symbol. When we lookup mst
2359 symbols, we will choose mst_text over
2360 mst_solib_trampoline. */
2361 record_minimal_symbol
2362 (reader
, namestring
, symbol
.n_value
,
2363 mst_solib_trampoline
, symbol
.n_scnum
, objfile
);
2364 misc_func_recorded
= 1;
2368 /* The symbols often have the same names as
2369 debug symbols for functions, and confuse
2375 /* xlc puts each variable in a separate csect,
2376 so we get an XTY_SD for each variable. But
2377 gcc puts several variables in a csect, so
2378 that each variable only gets an XTY_LD. We
2379 still need to record them. This will
2380 typically be XMC_RW; I suspect XMC_RO and
2381 XMC_BS might be possible too. */
2382 if (*namestring
!= '.')
2383 record_minimal_symbol
2384 (reader
, namestring
, symbol
.n_value
,
2385 sclass
== C_HIDEXT
? mst_file_data
: mst_data
,
2386 symbol
.n_scnum
, objfile
);
2392 switch (csect_aux
.x_csect
.x_smclas
)
2396 /* Common variables are recorded in the minimal symbol
2397 table, except for section symbols. */
2398 if (*namestring
!= '.')
2399 record_minimal_symbol
2400 (reader
, namestring
, symbol
.n_value
,
2401 sclass
== C_HIDEXT
? mst_file_bss
: mst_bss
,
2402 symbol
.n_scnum
, objfile
);
2414 unsigned int symnum_before
;
2416 symnum_before
= ssymnum
;
2417 swap_sym (&symbol
, &main_aux
[0], &namestring
, &sraw_symbol
,
2420 /* See if the last csect needs to be recorded. */
2422 if (last_csect_name
&& !misc_func_recorded
)
2424 /* If no misc. function recorded in the last seen csect, enter
2425 it as a function. This will take care of functions like
2426 strcmp() compiled by xlc. */
2428 record_minimal_symbol (reader
, last_csect_name
, last_csect_val
,
2429 mst_text
, last_csect_sec
, objfile
);
2430 misc_func_recorded
= 1;
2435 xcoff_end_psymtab (objfile
, pst
, psymtab_include_list
,
2436 includes_used
, symnum_before
,
2437 dependency_list
, dependencies_used
,
2440 dependencies_used
= 0;
2442 first_fun_line_offset
= 0;
2444 /* XCOFF, according to the AIX 3.2 documentation, puts the
2445 filename in cs->c_name. But xlc 1.3.0.2 has decided to
2446 do things the standard COFF way and put it in the auxent.
2447 We use the auxent if the symbol is ".file" and an auxent
2448 exists, otherwise use the symbol itself. */
2449 if (!strcmp (namestring
, ".file") && symbol
.n_numaux
> 0)
2451 filestring
= coff_getfilename (&main_aux
[0], objfile
);
2454 filestring
= namestring
;
2456 pst
= xcoff_start_psymtab (objfile
,
2459 last_csect_name
= NULL
;
2465 complaint (_("Storage class %d not recognized during scan"),
2471 /* C_FCN is .bf and .ef symbols. I think it is sufficient
2472 to handle only the C_FUN and C_EXT. */
2486 /* C_EINCL means we are switching back to the main file. But there
2487 is no reason to care; the only thing we want to know about
2488 includes is the names of all the included (.h) files. */
2493 /* I don't think C_STAT is used in xcoff; C_HIDEXT appears to be
2497 /* I don't think the name of the common block (as opposed to the
2498 variables within it) is something which is user visible
2506 /* I think we can ignore C_LSYM; types on xcoff seem to use C_DECL
2507 so C_LSYM would appear to be only for locals. */
2513 /* We probably could save a few instructions by assuming that
2514 C_LSYM, C_PSYM, etc., never have auxents. */
2515 int naux1
= symbol
.n_numaux
+ 1;
2518 sraw_symbol
+= bfd_coff_symesz (abfd
) * naux1
;
2524 /* Mark down an include file in the current psymtab. */
2525 enum language tmp_language
;
2527 swap_sym (&symbol
, &main_aux
[0], &namestring
, &sraw_symbol
,
2530 tmp_language
= deduce_language_from_filename (namestring
);
2532 /* Only change the psymtab's language if we've learned
2533 something useful (eg. tmp_language is not language_unknown).
2534 In addition, to match what start_subfile does, never change
2536 if (tmp_language
!= language_unknown
2537 && (tmp_language
!= language_c
2538 || psymtab_language
!= language_cplus
))
2539 psymtab_language
= tmp_language
;
2541 /* In C++, one may expect the same filename to come round many
2542 times, when code is coming alternately from the main file
2543 and from inline functions in other files. So I check to see
2544 if this is a file we've seen before -- either the main
2545 source file, or a previously included file.
2547 This seems to be a lot of time to be spending on N_SOL, but
2548 things like "break c-exp.y:435" need to work (I
2549 suppose the psymtab_include_list could be hashed or put
2550 in a binary tree, if profiling shows this is a major hog). */
2551 if (pst
&& strcmp (namestring
, pst
->filename
) == 0)
2557 for (i
= 0; i
< includes_used
; i
++)
2558 if (strcmp (namestring
, psymtab_include_list
[i
]) == 0)
2566 psymtab_include_list
[includes_used
++] = namestring
;
2567 if (includes_used
>= includes_allocated
)
2569 const char **orig
= psymtab_include_list
;
2571 psymtab_include_list
= (const char **)
2572 alloca ((includes_allocated
*= 2) *
2573 sizeof (const char *));
2574 memcpy (psymtab_include_list
, orig
,
2575 includes_used
* sizeof (const char *));
2580 /* The value of the C_FUN is not the address of the function (it
2581 appears to be the address before linking), but as long as it
2582 is smaller than the actual address, then find_pc_partial_function
2583 will use the minimal symbols instead. I hope. */
2592 swap_sym (&symbol
, &main_aux
[0], &namestring
, &sraw_symbol
,
2595 p
= strchr (namestring
, ':');
2597 continue; /* Not a debugging symbol. */
2599 /* Main processing section for debugging symbols which
2600 the initial read through the symbol tables needs to worry
2601 about. If we reach this point, the symbol which we are
2602 considering is definitely one we are interested in.
2603 p must also contain the (valid) index into the namestring
2604 which indicates the debugging type symbol. */
2609 if (gdbarch_static_transform_name_p (gdbarch
))
2610 namestring
= gdbarch_static_transform_name
2611 (gdbarch
, namestring
);
2613 add_psymbol_to_list (gdb::string_view (namestring
,
2615 true, VAR_DOMAIN
, LOC_STATIC
,
2616 SECT_OFF_DATA (objfile
),
2617 psymbol_placement::STATIC
,
2619 psymtab_language
, objfile
);
2623 /* The addresses in these entries are reported to be
2624 wrong. See the code that reads 'G's for symtabs. */
2625 add_psymbol_to_list (gdb::string_view (namestring
,
2627 true, VAR_DOMAIN
, LOC_STATIC
,
2628 SECT_OFF_DATA (objfile
),
2629 psymbol_placement::GLOBAL
,
2631 psymtab_language
, objfile
);
2635 /* When a 'T' entry is defining an anonymous enum, it
2636 may have a name which is the empty string, or a
2637 single space. Since they're not really defining a
2638 symbol, those shouldn't go in the partial symbol
2639 table. We do pick up the elements of such enums at
2640 'check_enum:', below. */
2641 if (p
>= namestring
+ 2
2642 || (p
== namestring
+ 1
2643 && namestring
[0] != ' '))
2645 add_psymbol_to_list (gdb::string_view (namestring
,
2647 true, STRUCT_DOMAIN
, LOC_TYPEDEF
, -1,
2648 psymbol_placement::STATIC
,
2649 0, psymtab_language
, objfile
);
2652 /* Also a typedef with the same name. */
2653 add_psymbol_to_list (gdb::string_view (namestring
,
2655 true, VAR_DOMAIN
, LOC_TYPEDEF
, -1,
2656 psymbol_placement::STATIC
,
2657 0, psymtab_language
, objfile
);
2664 if (p
!= namestring
) /* a name is there, not just :T... */
2666 add_psymbol_to_list (gdb::string_view (namestring
,
2668 true, VAR_DOMAIN
, LOC_TYPEDEF
, -1,
2669 psymbol_placement::STATIC
,
2670 0, psymtab_language
, objfile
);
2673 /* If this is an enumerated type, we need to
2674 add all the enum constants to the partial symbol
2675 table. This does not cover enums without names, e.g.
2676 "enum {a, b} c;" in C, but fortunately those are
2677 rare. There is no way for GDB to find those from the
2678 enum type without spending too much time on it. Thus
2679 to solve this problem, the compiler needs to put out the
2680 enum in a nameless type. GCC2 does this. */
2682 /* We are looking for something of the form
2683 <name> ":" ("t" | "T") [<number> "="] "e"
2684 {<constant> ":" <value> ","} ";". */
2686 /* Skip over the colon and the 't' or 'T'. */
2688 /* This type may be given a number. Also, numbers can come
2689 in pairs like (0,26). Skip over it. */
2690 while ((*p
>= '0' && *p
<= '9')
2691 || *p
== '(' || *p
== ',' || *p
== ')'
2697 /* The aix4 compiler emits extra crud before the
2701 /* Skip over the type (?). */
2705 /* Skip over the colon. */
2709 /* We have found an enumerated type. */
2710 /* According to comments in read_enum_type
2711 a comma could end it instead of a semicolon.
2712 I don't know where that happens.
2714 while (*p
&& *p
!= ';' && *p
!= ',')
2718 /* Check for and handle cretinous dbx symbol name
2720 if (*p
== '\\' || (*p
== '?' && p
[1] == '\0'))
2721 p
= next_symbol_text (objfile
);
2723 /* Point to the character after the name
2724 of the enum constant. */
2725 for (q
= p
; *q
&& *q
!= ':'; q
++)
2727 /* Note that the value doesn't matter for
2728 enum constants in psymtabs, just in symtabs. */
2729 add_psymbol_to_list (gdb::string_view (p
, q
- p
), true,
2730 VAR_DOMAIN
, LOC_CONST
, -1,
2731 psymbol_placement::STATIC
,
2732 0, psymtab_language
, objfile
);
2733 /* Point past the name. */
2735 /* Skip over the value. */
2736 while (*p
&& *p
!= ',')
2738 /* Advance past the comma. */
2746 /* Constant, e.g. from "const" in Pascal. */
2747 add_psymbol_to_list (gdb::string_view (namestring
,
2749 true, VAR_DOMAIN
, LOC_CONST
, -1,
2750 psymbol_placement::STATIC
,
2751 0, psymtab_language
, objfile
);
2757 int name_len
= p
- namestring
;
2758 char *name
= (char *) xmalloc (name_len
+ 1);
2760 memcpy (name
, namestring
, name_len
);
2761 name
[name_len
] = '\0';
2762 function_outside_compilation_unit_complaint (name
);
2765 add_psymbol_to_list (gdb::string_view (namestring
,
2767 true, VAR_DOMAIN
, LOC_BLOCK
,
2768 SECT_OFF_TEXT (objfile
),
2769 psymbol_placement::STATIC
,
2771 psymtab_language
, objfile
);
2774 /* Global functions were ignored here, but now they
2775 are put into the global psymtab like one would expect.
2776 They're also in the minimal symbol table. */
2780 int name_len
= p
- namestring
;
2781 char *name
= (char *) xmalloc (name_len
+ 1);
2783 memcpy (name
, namestring
, name_len
);
2784 name
[name_len
] = '\0';
2785 function_outside_compilation_unit_complaint (name
);
2789 /* We need only the minimal symbols for these
2790 loader-generated definitions. Keeping the global
2791 symbols leads to "in psymbols but not in symbols"
2793 if (startswith (namestring
, "@FIX"))
2796 add_psymbol_to_list (gdb::string_view (namestring
,
2798 true, VAR_DOMAIN
, LOC_BLOCK
,
2799 SECT_OFF_TEXT (objfile
),
2800 psymbol_placement::GLOBAL
,
2802 psymtab_language
, objfile
);
2805 /* Two things show up here (hopefully); static symbols of
2806 local scope (static used inside braces) or extensions
2807 of structure symbols. We can ignore both. */
2821 case '#': /* For symbol identification (used in
2826 /* It is a C++ nested symbol. We don't need to record it
2827 (I don't think); if we try to look up foo::bar::baz,
2828 then symbols for the symtab containing foo should get
2829 read in, I think. */
2830 /* Someone says sun cc puts out symbols like
2831 /foo/baz/maclib::/usr/local/bin/maclib,
2832 which would get here with a symbol type of ':'. */
2836 /* Unexpected symbol descriptor. The second and
2837 subsequent stabs of a continued stab can show up
2838 here. The question is whether they ever can mimic
2839 a normal stab--it would be nice if not, since we
2840 certainly don't want to spend the time searching to
2841 the end of every string looking for a
2844 complaint (_("unknown symbol descriptor `%c'"), p
[1]);
2846 /* Ignore it; perhaps it is an extension that we don't
2856 xcoff_end_psymtab (objfile
, pst
, psymtab_include_list
, includes_used
,
2857 ssymnum
, dependency_list
,
2858 dependencies_used
, textlow_not_set
);
2861 /* Record the toc offset value of this symbol table into objfile
2862 structure. If no XMC_TC0 is found, toc_offset should be zero.
2863 Another place to obtain this information would be file auxiliary
2866 XCOFF_DATA (objfile
)->toc_offset
= toc_offset
;
2869 /* Return the toc offset value for a given objfile. */
2872 xcoff_get_toc_offset (struct objfile
*objfile
)
2875 return XCOFF_DATA (objfile
)->toc_offset
;
2879 /* Scan and build partial symbols for a symbol file.
2880 We have been initialized by a call to dbx_symfile_init, which
2881 put all the relevant info into a "struct dbx_symfile_info",
2882 hung off the objfile structure.
2884 SECTION_OFFSETS contains offsets relative to which the symbols in the
2885 various sections are (depending where the sections were actually
2889 xcoff_initial_scan (struct objfile
*objfile
, symfile_add_flags symfile_flags
)
2893 int num_symbols
; /* # of symbols */
2894 file_ptr symtab_offset
; /* symbol table and */
2895 file_ptr stringtab_offset
; /* string table file offsets */
2896 struct xcoff_symfile_info
*info
;
2900 info
= XCOFF_DATA (objfile
);
2901 symfile_bfd
= abfd
= objfile
->obfd
;
2902 name
= objfile_name (objfile
);
2904 num_symbols
= bfd_get_symcount (abfd
); /* # of symbols */
2905 symtab_offset
= obj_sym_filepos (abfd
); /* symbol table file offset */
2906 stringtab_offset
= symtab_offset
+
2907 num_symbols
* coff_data (abfd
)->local_symesz
;
2909 info
->min_lineno_offset
= 0;
2910 info
->max_lineno_offset
= 0;
2911 bfd_map_over_sections (abfd
, find_linenos
, info
);
2913 if (num_symbols
> 0)
2915 /* Read the string table. */
2916 init_stringtab (abfd
, stringtab_offset
, objfile
);
2918 /* Read the .debug section, if present and if we're not ignoring
2920 if (!(objfile
->flags
& OBJF_READNEVER
))
2922 struct bfd_section
*secp
;
2923 bfd_size_type length
;
2924 bfd_byte
*debugsec
= NULL
;
2926 secp
= bfd_get_section_by_name (abfd
, ".debug");
2929 length
= bfd_section_size (secp
);
2933 = (bfd_byte
*) obstack_alloc (&objfile
->objfile_obstack
,
2936 if (!bfd_get_full_section_contents (abfd
, secp
, &debugsec
))
2938 error (_("Error reading .debug section of `%s': %s"),
2939 name
, bfd_errmsg (bfd_get_error ()));
2943 info
->debugsec
= (char *) debugsec
;
2947 /* Read the symbols. We keep them in core because we will want to
2948 access them randomly in read_symbol*. */
2949 val
= bfd_seek (abfd
, symtab_offset
, SEEK_SET
);
2951 error (_("Error reading symbols from %s: %s"),
2952 name
, bfd_errmsg (bfd_get_error ()));
2953 size
= coff_data (abfd
)->local_symesz
* num_symbols
;
2954 info
->symtbl
= (char *) obstack_alloc (&objfile
->objfile_obstack
, size
);
2955 info
->symtbl_num_syms
= num_symbols
;
2957 val
= bfd_bread (info
->symtbl
, size
, abfd
);
2959 perror_with_name (_("reading symbol table"));
2961 /* I'm not sure how how good num_symbols is; the rule of thumb in
2962 init_psymbol_list was developed for a.out. On the one hand,
2963 num_symbols includes auxents. On the other hand, it doesn't
2965 init_psymbol_list (objfile
, num_symbols
);
2967 scoped_free_pendings free_pending
;
2968 minimal_symbol_reader
reader (objfile
);
2970 /* Now that the symbol table data of the executable file are all in core,
2971 process them and define symbols accordingly. */
2973 scan_xcoff_symtab (reader
, objfile
);
2975 /* Install any minimal symbols that have been collected as the current
2976 minimal symbols for this objfile. */
2980 /* DWARF2 sections. */
2982 if (dwarf2_has_info (objfile
, &dwarf2_xcoff_names
))
2983 dwarf2_build_psymtabs (objfile
);
2985 dwarf2_build_frame_info (objfile
);
2989 xcoff_symfile_offsets (struct objfile
*objfile
,
2990 const section_addr_info
&addrs
)
2992 const char *first_section_name
;
2994 default_symfile_offsets (objfile
, addrs
);
2996 /* Oneof the weird side-effects of default_symfile_offsets is that
2997 it sometimes sets some section indices to zero for sections that,
2998 in fact do not exist. See the body of default_symfile_offsets
2999 for more info on when that happens. Undo that, as this then allows
3000 us to test whether the associated section exists or not, and then
3001 access it quickly (without searching it again). */
3003 if (objfile
->section_offsets
.empty ())
3004 return; /* Is that even possible? Better safe than sorry. */
3006 first_section_name
= bfd_section_name (objfile
->sections
[0].the_bfd_section
);
3008 if (objfile
->sect_index_text
== 0
3009 && strcmp (first_section_name
, ".text") != 0)
3010 objfile
->sect_index_text
= -1;
3012 if (objfile
->sect_index_data
== 0
3013 && strcmp (first_section_name
, ".data") != 0)
3014 objfile
->sect_index_data
= -1;
3016 if (objfile
->sect_index_bss
== 0
3017 && strcmp (first_section_name
, ".bss") != 0)
3018 objfile
->sect_index_bss
= -1;
3020 if (objfile
->sect_index_rodata
== 0
3021 && strcmp (first_section_name
, ".rodata") != 0)
3022 objfile
->sect_index_rodata
= -1;
3025 /* Register our ability to parse symbols for xcoff BFD files. */
3027 static const struct sym_fns xcoff_sym_fns
=
3030 /* It is possible that coff and xcoff should be merged as
3031 they do have fundamental similarities (for example, the extra storage
3032 classes used for stabs could presumably be recognized in any COFF file).
3033 However, in addition to obvious things like all the csect hair, there are
3034 some subtler differences between xcoffread.c and coffread.c, notably
3035 the fact that coffread.c has no need to read in all the symbols, but
3036 xcoffread.c reads all the symbols and does in fact randomly access them
3037 (in C_BSTAT and line number processing). */
3039 xcoff_new_init
, /* init anything gbl to entire symtab */
3040 xcoff_symfile_init
, /* read initial info, setup for sym_read() */
3041 xcoff_initial_scan
, /* read a symbol file into symtab */
3042 NULL
, /* sym_read_psymbols */
3043 xcoff_symfile_finish
, /* finished with file, cleanup */
3044 xcoff_symfile_offsets
, /* xlate offsets ext->int form */
3045 default_symfile_segments
, /* Get segment information from a file. */
3046 aix_process_linenos
,
3047 default_symfile_relocate
, /* Relocate a debug section. */
3048 NULL
, /* sym_probe_fns */
3052 /* Same as xcoff_get_n_import_files, but for core files. */
3055 xcoff_get_core_n_import_files (bfd
*abfd
)
3057 asection
*sect
= bfd_get_section_by_name (abfd
, ".ldinfo");
3059 file_ptr offset
= 0;
3063 return -1; /* Not a core file. */
3065 for (offset
= 0; offset
< bfd_section_size (sect
);)
3071 if (!bfd_get_section_contents (abfd
, sect
, buf
, offset
, 4))
3073 next
= bfd_get_32 (abfd
, buf
);
3075 break; /* This is the last entry. */
3079 /* Return the number of entries, excluding the first one, which is
3080 the path to the executable that produced this core file. */
3081 return n_entries
- 1;
3084 /* Return the number of import files (shared libraries) that the given
3085 BFD depends on. Return -1 if this number could not be computed. */
3088 xcoff_get_n_import_files (bfd
*abfd
)
3090 asection
*sect
= bfd_get_section_by_name (abfd
, ".loader");
3094 /* If the ".loader" section does not exist, the objfile is probably
3095 not an executable. Might be a core file... */
3097 return xcoff_get_core_n_import_files (abfd
);
3099 /* The number of entries in the Import Files Table is stored in
3100 field l_nimpid. This field is always at offset 16, and is
3101 always 4 bytes long. Read those 4 bytes. */
3103 if (!bfd_get_section_contents (abfd
, sect
, buf
, 16, 4))
3105 l_nimpid
= bfd_get_32 (abfd
, buf
);
3107 /* By convention, the first entry is the default LIBPATH value
3108 to be used by the system loader, so it does not count towards
3109 the number of import files. */
3110 return l_nimpid
- 1;
3113 void _initialize_xcoffread ();
3115 _initialize_xcoffread ()
3117 add_symtab_fns (bfd_target_xcoff_flavour
, &xcoff_sym_fns
);