sim/ChangeLog

   1 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * README-HACKING (AC_PREREQ): Delete.
   4
   5 2021-01-08  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * README-HACKING (C Language Assumptions): Require C11 compiler.
   8
   9 2020-09-03  Jose E. Marchesi  <jose.marchesi@oracle.com>
  10
  11         * configure.ac: Do not configure sim/testsuite nor sim/igen if the
  12         primary target doesn't have a simulator.
  13         * configure: Regenerate.
  14
  15 2020-08-04  Jose E. Marchesi  <jose.marchesi@oracle.com>
  16             David Faust <david.faust@oracle.com>
  17
  18         * configure.tgt (sim_arch): Add entry for bpf-*-*.
  19         * configure: Regenerate.
  20         * MAINTAINERS: Add maintainer for the BPF simulator.
  21
  22 2019-12-19  Tom Tromey  <tromey@adacore.com>
  23
  24         PR build/24572:
  25         * Makefile.in (install-strip): New target.
  26
  27 2019-09-23  Dimitar Dimitrov  <dimitar@dinux.eu>
  28
  29         * MAINTAINERS: Add myself as PRU maintainer.
  30         * configure: Regenerated.
  31         * configure.tgt: Add PRU.
  32
  33 2019-09-18  Alan Modra  <amodra@gmail.com>
  34
  35         * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
  36         * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
  37         * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
  38         * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
  39         * rx/trace.c: Update throughout for bfd section macro changes.
  40
  41 2019-02-28  Joel Brobecker  <brobecker@adacore.com>
  42
  43         * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
  44
  45 2019-02-13  Simon Marchi  <simon.marchi@ericsson.com>
  46
  47         * MAINTAINERS: Add Andrew Burgess as global maintainer.
  48
  49 2019-01-03  Pavel I. Kryukov  <kryukov@frtk.ru>
  50
  51         * sim-base.h: Add 'extern C' if header is compiled with C++.
  52
  53 2018-12-06  Andrew Burgess  <andrew.burgess@embecosm.com>
  54
  55         * common/acinclude.m4 (enable-cgen-maint): Support passing path to
  56         cgen source tree.
  57         * cris/configure: Regenerate.
  58         * frv/configure: Regenerate.
  59         * iq2000/configure: Regenerate.
  60         * lm32/configure: Regenerate.
  61         * m32r/configure: Regenerate.
  62         * or1k/configure: Regenerate.
  63         * sh64/configure: Regenerate.
  64
  65 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
  66
  67         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
  68         ISA maintenance.
  69
  70 2018-07-19  DJ Delorie  <dj@redhat.com>
  71
  72         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
  73
  74 2018-07-14  Stafford Horne  <shorne@gmail.com>
  75
  76         * MAINTAINERS (or1k): Add myself as or1k maintainer.
  77
  78 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
  79
  80         * All configure.ac: Remove AC_PREREQ.
  81         * All configure: Re-generate.
  82
  83 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
  84
  85         * MAINTAINERS: Update my company e-mail address.
  86
  87 2017-12-12  Stafford Horne  <shorne@gmail.com>
  88             Peter Gavin  <pgavin@gmail.com>
  89
  90         * configure: Regenerated.
  91
  92 2017-12-12  Stafford Horne  <shorne@gmail.com>
  93             Peter Gavin  <pgavin@gmail.com>
  94
  95         * configure.tgt: Add or1k sim.
  96
  97 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
  98
  99         * MAINTAINERS (ft32): Add myself.
 100
 101 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
 102
 103         * MAINTAINERS (aarch64): Update my email address.
 104
 105 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 106
 107         * configure.ac: Honor existing CC_FOR_BUILD in environment.
 108         * configure: Regenerate.
 109
 110 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
 111
 112         * MAINTAINTERS (aarch64): Add myself.
 113
 114 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
 115
 116         * MAINTAINERS (Maintainers for particular sims): Add myself as
 117         a MIPS maintainer.
 118
 119 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
 120
 121         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
 122
 123 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 124
 125         * configure.ac: Delete sim_common check and the
 126         AC_CONFIG_SUBDIRS(common) call.
 127         * configure: Regenerate.
 128         * configure.tgt (sim_common): Delete the variable.
 129
 130 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 131
 132         * .gitignore: Delete /common/cconfig.h entry.
 133
 134 2016-01-05  Nick Clifton  <nickc@redhat.com>
 135
 136         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 137
 138 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 139
 140         * aarch64/simulator.c: Remove syscall.h include.
 141
 142 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 143
 144         * README-HACKING: Delete mention of tconfig.h.
 145
 146 2015-11-24  Nick Clifton  <nickc@redhat.com>
 147
 148         * configure.tgt: Add aarch64 entry.
 149         * configure: Regenerate.
 150
 151 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 152
 153         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 154         * configure: Regenerate.
 155
 156 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 157
 158         * README-HACKING: Change configure.in to configure.ac.
 159
 160 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 161
 162         * arm/configure: Regenerated.
 163         * avr/configure: Likewise.
 164         * bfin/configure: Likewise.
 165         * common/configure: Likewise.
 166         * cr16/configure: Likewise.
 167         * cris/configure: Likewise.
 168         * d10v/configure: Likewise.
 169         * erc32/configure: Likewise.
 170         * frv/configure: Likewise.
 171         * ft32/configure: Likewise.
 172         * h8300/configure: Likewise.
 173         * igen/configure: Likewise.
 174         * iq2000/configure: Likewise.
 175         * lm32/configure: Likewise.
 176         * m32c/configure: Likewise.
 177         * m32r/configure: Likewise.
 178         * m68hc11/configure: Likewise.
 179         * mcore/configure: Likewise.
 180         * microblaze/configure: Likewise.
 181         * mips/configure: Likewise.
 182         * mn10300/configure: Likewise.
 183         * moxie/configure: Likewise.
 184         * msp430/configure: Likewise.
 185         * ppc/configure: Likewise.
 186         * rl78/configure: Likewise.
 187         * rx/configure: Likewise.
 188         * sh/configure: Likewise.
 189         * sh64/configure: Likewise.
 190         * v850/configure: Likewise.
 191
 192 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 193
 194         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 195         (BFD_LIB): Remove $(ZLIB).
 196         (CONFIG_LIBS): Add $(ZLIB).
 197         * ppc/Makefile.in (ZLIBINC): Removed.
 198         (INCLUDES): Remove $(ZLIBINC).
 199         (BFD_LIB): Remove $(ZLIB).
 200
 201 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 202
 203         * arm/configure: Regenerated.
 204         * avr/configure: Likewise.
 205         * bfin/configure: Likewise.
 206         * common/configure: Likewise.
 207         * cr16/configure: Likewise.
 208         * cris/configure: Likewise.
 209         * d10v/configure: Likewise.
 210         * erc32/configure: Likewise.
 211         * frv/configure: Likewise.
 212         * ft32/configure: Likewise.
 213         * h8300/configure: Likewise.
 214         * igen/configure: Likewise.
 215         * iq2000/configure: Likewise.
 216         * lm32/configure: Likewise.
 217         * m32c/configure: Likewise.
 218         * m32r/configure: Likewise.
 219         * m68hc11/configure: Likewise.
 220         * mcore/configure: Likewise.
 221         * microblaze/configure: Likewise.
 222         * mips/configure: Likewise.
 223         * mn10300/configure: Likewise.
 224         * moxie/configure: Likewise.
 225         * msp430/configure: Likewise.
 226         * ppc/configure: Likewise.
 227         * rl78/configure: Likewise.
 228         * rx/configure: Likewise.
 229         * sh/configure: Likewise.
 230         * sh64/configure: Likewise.
 231         * v850/configure: Likewise.
 232
 233 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 234
 235         * configure: Regenerate.
 236         * configure.ac: Delete sim_testsuite check and config in testsuite.
 237         * configure.tgt (sim_testsuite): Delete everywhere.
 238
 239 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 240
 241         * configure: Regenerate.
 242         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 243
 244 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 245
 246         * configure.tgt: Add FT32 entry.
 247         * configure: Regenerate.
 248
 249 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 250
 251         * .gitignore: Delete tconfig.h.
 252         * README-HACKING: Change tconfig.in to tconfig.h.
 253
 254 2014-03-12  Nick Clifton  <nickc@redhat.com>
 255
 256         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 257
 258 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 259
 260         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 261         * configure: Regenerate.
 262
 263 2014-01-06  Tom Tromey  <tromey@redhat.com>
 264
 265         * common/cgen-trace.c: Don't use old VA_* macros.
 266         * common/sim-load.c (xprintf): Likewise.
 267         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 268
 269 2014-01-06  Tom Tromey  <tromey@redhat.com>
 270
 271         * README-HACKING: Don't use PARAMS.
 272         * arm/wrapper.c: Don't use PARAMS.
 273         * bfin/sim-main.h: Don't use PARAMS.
 274         * common/callback.c: Don't use PARAMS.
 275         * common/cgen-trace.c: Don't use PARAMS.
 276         * common/run-sim.h: Don't use PARAMS.
 277         * common/run.c: Don't use PARAMS.
 278         * common/sim-base.h: Don't use PARAMS.
 279         * common/sim-load.c: Don't use PARAMS.
 280         * common/sim-options.h: Don't use PARAMS.
 281         * common/sim-trace.c: Don't use PARAMS.
 282         * common/sim-trace.h: Don't use PARAMS.
 283         * common/sim-utils.h: Don't use PARAMS.
 284         * cr16/cr16_sim.h: Don't use PARAMS.
 285         * cr16/gencode.c: Don't use PARAMS.
 286         * cr16/interp.c: Don't use PARAMS.
 287         * cr16/simops.c: Don't use PARAMS.
 288         * d10v/d10v_sim.h: Don't use PARAMS.
 289         * d10v/gencode.c: Don't use PARAMS.
 290         * d10v/interp.c: Don't use PARAMS.
 291         * d10v/simops.c: Don't use PARAMS.
 292         * erc32/erc32.c: Don't use PARAMS.
 293         * erc32/exec.c: Don't use PARAMS.
 294         * erc32/float.c: Don't use PARAMS.
 295         * erc32/func.c: Don't use PARAMS.
 296         * erc32/sis.c: Don't use PARAMS.
 297         * erc32/sis.h: Don't use PARAMS.
 298         * mips/interp.c: Don't use PARAMS.
 299         * mips/sim-main.h: Don't use PARAMS.
 300         * sh/interp.c: Don't use PARAMS.
 301         * v850/sim-main.h: Don't use PARAMS.
 302         * v850/v850_sim.h: Don't use PARAMS.
 303
 304 2013-11-07  Will Newton  <will.newton@linaro.org>
 305
 306         PR gdb/15508
 307         * arm/wrapper.c (sim_create_inferior): Call init before
 308         accessing STATE.
 309
 310 2013-11-07  Will Newton  <will.newton@linaro.org>
 311
 312         PR gdb/8989
 313         * arm/wrapper.c (sim_create_inferior): Avoid calling
 314         bfd_get_mach with a NULL bfd.
 315
 316 2013-06-21  Nick Clifton  <nickc@redhat.com>
 317
 318         * msp430: New Directory.
 319         * configure.tgt: Add it.
 320         * configure: Regenerate.
 321
 322 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 323
 324         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 325         * avr/interp.c (sim_complete_command): Ditto.
 326         * common/sim-options.c (sim_complete_command): Ditto.
 327         * cr16/interp.c (sim_complete_command): Ditto.
 328         * erc32/interf.c (sim_complete_command): Ditto.
 329         * m32c/gdb-if.c (sim_complete_command): Ditto.
 330         * microblaze/interp.c (sim_complete_command): Ditto.
 331         * ppc/sim_calls.c (sim_complete_command): Ditto.
 332         * rl78/gdb-if.c (sim_complete_command): Ditto.
 333         * rx/gdb-if.c (sim_complete_command): Ditto.
 334         * sh/interp.c (sim_complete_command): Ditto.
 335
 336 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 337
 338         Update year range in copyright notice of all files.
 339
 340 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 341
 342         Update old contact info in GPL license notices.
 343
 344 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 345
 346         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 347
 348 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 349
 350         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 351         condition.
 352         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 353         * arm/configure: Regenerate.
 354         * avr/configure: Regenerate.
 355         * bfin/configure: Regenerate.
 356         * common/configure: Regenerate.
 357         * cr16/configure: Regenerate.
 358         * cris/configure: Regenerate.
 359         * d10v/configure: Regenerate.
 360         * erc32/configure: Regenerate.
 361         * frv/configure: Regenerate.
 362         * h8300/configure: Regenerate.
 363         * igen/configure: Regenerate.
 364         * iq2000/configure: Regenerate.
 365         * lm32/configure: Regenerate.
 366         * m32c/configure: Regenerate.
 367         * m32r/configure: Regenerate.
 368         * m68hc11/configure: Regenerate.
 369         * mcore/configure: Regenerate.
 370         * microblaze/configure: Regenerate.
 371         * mips/configure: Regenerate.
 372         * mn10300/configure: Regenerate.
 373         * moxie/configure: Regenerate.
 374         * ppc/configure: Regenerate.
 375         * rl78/configure: Regenerate.
 376         * rx/configure: Regenerate.
 377         * sh/configure: Regenerate.
 378         * sh64/configure: Regenerate.
 379         * testsuite/configure: Regenerate.
 380         * v850/configure: Regenerate.
 381
 382 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 383
 384         * MAINTAINERS: Update my email address.
 385
 386 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 387
 388         * mips/basic.exp: Add mips*-mti-elf* target.
 389         * configure.ac: Add mips*-mti-elf* target.
 390         * configure: Regenerate.
 391
 392 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 393
 394         * configure: Regenerate.
 395
 396 2012-06-06  Michael Eager  <eager@eagercon.com>
 397
 398         * microblaze/interp.c (config.h): Add #include.
 399
 400 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 401
 402         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 403         Frysinger.
 404
 405 2011-11-28  DJ Delorie  <dj@redhat.com>
 406
 407         * configure.tgt: Add rl78 support.
 408         * configure: Regenerate.
 409         * rl78: New directory.
 410         * MAINTAINERS: Add myself as RL78 maintainer.
 411
 412 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 413
 414         * MAINTAINERS: Remove Thiemo Seufer.
 415
 416 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 417
 418         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 419         * configure: Regenerate.
 420
 421 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 422
 423         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 424         handle targets.
 425         * configure: Regenerate.
 426
 427 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 428
 429         * MAINTAINERS: Add bfin entry.
 430         * configure.tgt (bfin-*-*): Handle bfin targets.
 431         * configure: Regenerate.
 432
 433 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 434
 435         * .gitignore: Add /*/hw-config.h.
 436
 437 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 438
 439         * .gitignore: New file.
 440
 441 2010-07-28  DJ Delorie  <dj@redhat.com>
 442
 443         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 444
 445 2010-06-08  Nick Clifton  <nickc@redhat.com>
 446
 447         * reg.c (set_oszc): Use unsigned int for the mask.
 448         (set_szc, set_osz, set_sz): Likewise.
 449
 450 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 451
 452         * configure.ac: Target logic moved out to and included from ...
 453         * configure.tgt: ... this new file.
 454         * configure: Regenerated.
 455
 456 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 457
 458         * README-HACKING: Add more sections.
 459
 460 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 461
 462         * avr/configure: Regenerate.
 463         * cris/configure: Regenerate.
 464         * microblaze/configure: Regenerate.
 465
 466 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 467
 468         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 469         * common/common.m4: Use AM_ZLIB to check for zlib support.
 470         * ppc/configure.ac: Likewise.
 471         * arm/configure, avr/configure, common/configure, cr16/configure,
 472         cris/configure, d10v/configure, erc32/configure, frv/configure,
 473         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 474         m32r/configure, m68hc11/configure, mcore/configure,
 475         microblaze/configure, mips/configure, mn10300/configure,
 476         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 477         v850/configure: Regenerate.
 478
 479 2009-11-24  DJ Delorie  <dj@redhat.com>
 480
 481         * rx: New directory.
 482         * configure.ac: Add entry for Renesas RX.
 483         * configure: Regenerate.
 484
 485 2009-10-16  Doug Evans  <dje@sebabeach.org>
 486
 487         * MAINTAINERS: Add myself as m32r maintainer.
 488
 489 2009-10-15  Michael Egaer  <eager@eagercon.com>
 490
 491         * MAINTAINERS: Add self as MicroBlaze maintainer.
 492
 493 2009-10-14  Ben Elliston  <bje@gnu.org>
 494
 495         * MAINTAINERS (common): Move myself to "past maintainers" section.
 496
 497 2009-10-06  Michael Eager  <eager@eagercon.com>
 498
 499         * microblaze/interp.c: Add include microblaze-dis.h.
 500
 501 2009-09-23  Michael Eager  <eager@eagercon.com>
 502
 503         * configure: Add microblaze-*.* (not regenerated).
 504         * configure.ac: Likewise.
 505         * microblaze/config.in: New.
 506         * microblaze/configure: Generate.
 507         * microblaze/configure.ac: New.
 508         * microblaze/interp.c: New.
 509         * microblaze/Makefile.in: New.
 510         * microblaze/microblaze.h: New.
 511         * microblaze/microblaze.isa: New.
 512         * microblaze/sim-main.h: New.
 513         * microblaze/sysdep.h: New.
 514
 515 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 516
 517         * avr/config.in: Regenerate.
 518         * avr/configure: Likewise.
 519         * configure: Likewise.
 520         * cris/config.in: Likewise.
 521         * cris/configure: Likewise.
 522
 523         * configure.ac: m4_include toplevel config/override.m4.
 524         * configure: Regenerate.
 525         * avr/configure: Regenerate.
 526         * cris/configure: Regenerate.
 527
 528 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 529
 530         * Makefile.in (datarootdir): New variable.
 531
 532 2009-05-18  Jon Beniston <jon@beniston.com>
 533
 534         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 535         * configure.ac: Add lm32 target.
 536         * lm32: New directory.
 537
 538 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 539
 540         * MAINTAINERS: Orphan ppc.
 541
 542 2009-04-30  Anthony Green  <green@moxielogic.com>
 543
 544         * MAINTAINERS: Add myself for the moxie port.
 545         * moxie: New directory.
 546         * configure.ac: Add entry for moxie.
 547         * configure: Regenerate.
 548
 549 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 550
 551         * avr: New directory.
 552         * configure.ac: Add avr.
 553         * configure: Regenerated.
 554
 555 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 556
 557         * Makefile.in: Add dummy install-pdf, html, and
 558         install-html targets.
 559
 560 2008-07-29  Nick Clifton  <nickc@redhat.com>
 561
 562         * common/genmloop.sh: Add new parameter: -shell to specify the
 563         command interpreter to use to run the input file.  This is
 564         necessary because otherwise SHELL is taken from the user's
 565         environment, and not from the makefile that invoked this script
 566         and the user might not be running an sh-like shell.
 567         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 568         * fr30/Makefile.in: Likewise.
 569         * frv/Makefile.in: Likewise.
 570         * i960/Makefile.in: Likewise.
 571         * iq2000/Makefile.in: Likewise.
 572         * m32r/Makefile.in: Likewise.
 573
 574         * frv/mloop.in: Add missing start of line comment marker.
 575
 576 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 577
 578         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 579
 580 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 581
 582         * MAINTAINERS: Add myself as maintainer of cr16 port.
 583
 584 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 585
 586         Add simulator for National cr16 processor.
 587         * cr16: New directory.
 588         * configure.ac: Add entry for National cr16.
 589         * configure: Regenerate.
 590
 591 2008-02-05  DJ Delorie  <dj@redhat.com>
 592
 593         * configure.ac (v850): V850 now has a testsuite.
 594         * configure (v850): Likewise.
 595
 596 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 597
 598         Updated copyright notices for most files.
 599
 600 2007-12-19  DJ Delorie  <dj@redhat.com>
 601
 602         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 603         cut_point.
 604
 605 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 606
 607         Switch the license of all files explicitly copyright the FSF
 608         to GPLv3.
 609
 610 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 611
 612         * Makefile.in: Add dummy "pdf" target.
 613
 614 2007-02-16  Thiemo Seufer  <ths@mips.com>
 615
 616         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 617
 618 2007-01-28  Manuel Lauss  <slauss@resi.at>
 619
 620         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 621         (sh-*-*): Change to sh*-*-*.
 622         * configure: Regenerated.
 623
 624 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 625
 626         Updated copyright notices for most files.
 627
 628 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 629
 630         * Makefile.in (autoconf-common autoheader-common): Only run
 631         autoheader on subdirs with a file config.in.
 632
 633         * configure.ac (common): Make the default "yes" for all targets
 634         with sim subdirs.
 635         * configure: Regenerate.
 636
 637         * Makefile.in (autoconf-common autoheader-common): In documented
 638         usage, say SHELL=/bin/sh.
 639         (.PHONY): Add autoheader-common.
 640
 641         * MAINTAINERS: Add self as authorized committer for *.
 642
 643 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 644
 645         * MAINTAINERS: Add Dave Brolley for sh64.
 646
 647 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 648
 649         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 650         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 651         * configure: Regenerated.
 652
 653 2006-05-05  Andreas Schwab  <schwab@suse.de>
 654
 655         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 656         * configure: Regenerate.
 657
 658         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 659         (CC_FOR_BUILD): Don't override.
 660         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 661
 662 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 663
 664         * MAINTAINERS: Add an "Authorized committers" section, and list
 665         DJ Delorie for v850.
 666
 667 2006-03-13  DJ Delorie  <dj@redhat.com>
 668
 669         * MAINTAINERS: Add self as m32c sim maintainer.
 670
 671 2006-01-23  Jim Blandy  <jimb@redhat.com>
 672
 673         Add simulator for Renesas M32C and M16C.
 674
 675         * m32c: New directory.
 676         * configure.ac: Add entry for Renesas M32C.
 677         * configure: Regenerate.
 678
 679 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 680
 681         * MAINTAINERS: Update my mail address, move myself to the
 682         "Past maintainers" section.
 683
 684 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 685
 686         * configure.ac: Add igen to v850 build.
 687         * configure: Regenerate.
 688
 689 2005-04-29  Paul Brook  <paul@codesourcery.com>
 690
 691         * common/callback.c (PIPE_BUF): Provide default definition.
 692         (os_lstat): Use stat if lstat is not available on the host.
 693         (os_ftruncate): Return EINVAL if not available on the host.
 694         (os_truncate): Ditto.
 695         * common/configure.ac: Check for lstat, truncate and ftruncate.
 696         * common/configure: Regenerate.
 697         * common/config.in: Regenerate.
 698
 699 2005-04-27  Paul Brook  <paul@codesourcery.com>
 700
 701         * common/Make-common.in: Add $(EXEEXT) to "run".
 702
 703 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 704
 705         * configure.ac: Add explicit sh64 case.
 706         * configure: Regenerate.
 707
 708 2005-03-30  Paul Brook  <paul@codesourcery.com>
 709
 710         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 711
 712 2005-02-28  Jim Blandy  <jimb@redhat.com>
 713
 714         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 715         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 716         Regenerated, after change to common/aclocal.m4.
 717
 718 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 719
 720         * iq2000: New target subdirectory.
 721         * configure.ac: Add iq2000 target.
 722         * configure: Regenerate.
 723
 724 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 725
 726         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 727         (realclean, install): Fail if subdir make failed.
 728
 729 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 730
 731         * cris: New directory, simulator for Axis Communications CRIS
 732         including CRIS v32, CGEN-based.
 733         * configure.ac: Add corresponding configury.
 734         * configure: Regenerate.
 735
 736 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 737
 738         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 739         common directory.  Remove sparc*-*-* from list.
 740
 741 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 742
 743         * Makefile.in (autoconf-common autoheader-common): Add --force to
 744         autoconf and autoheader.
 745         (autoconf-common autoheader-common)
 746         (autoconf-install autoheader-install): Check for configure.ac, not
 747         configure.in.
 748         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 749         * configure: Re-generate.
 750
 751 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 752
 753         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 754         correctly calls AC_CONFIG_SUBDIRS.
 755         * configure: Re-generate.
 756
 757 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 758
 759         * i960, h8500: Delete directory.
 760
 761 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 762
 763         * d30v, fr30, mn10200, z8k: Delete directory.
 764
 765 2004-03-10  Ben Elliston  <bje@gnu.org>
 766
 767         * MAINTAINERS: Update my mail address.
 768
 769 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 770
 771         * configure.in (mips*-*-*): Configure in testsuite.
 772         * configure: Regenerate.
 773
 774 2003-10-08  Dave Brolley  <brolley@redhat.com>
 775
 776         * configure.in: Move frv handling to alphabetically correct placement.
 777
 778 2003-09-03  Andreas Schwab  <schwab@suse.de>
 779
 780         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 781
 782 2003-08-29  Dave Brolley  <brolley@redhat.com>
 783
 784         * MAINTAINERS: Add myself as maintainer of the FRV port.
 785
 786 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 787             Dave Brolley  <brolley@redhat.com>
 788
 789         * frv/: New directory, simulator for the Fujitsu FRV.
 790         * configure.in: Add frv configury.
 791         * configure: Regenerate.
 792
 793 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 794
 795         * MAINTAINERS: Update my mail address.
 796
 797 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 798
 799         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 800         maintenance.  List igen and sh maintainers.  Mention that target
 801         and global maintainers pick up the slack.
 802
 803 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 804
 805         * configure.in: Add testsuite to extra_subdirs for sh.
 806         * configure: Regenerate.
 807
 808 2003-01-23  Nick Clifton  <nickc@redhat.com>
 809
 810         * Add sh2e support:
 811
 812 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 813
 814         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 815
 816 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 817
 818         * MAINTAINERS: Update my email address.
 819
 820 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 821
 822         * w65/: Delete directory.
 823
 824 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 825
 826         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 827         * configure: Re-generate.
 828
 829 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 830
 831         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 832         * configure: Re-generate.
 833
 834 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 835
 836         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 837         id, date and host to be overriden by NAME, ID, DATE and HOST
 838         respectfully.  Use ISO dates.
 839
 840 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 841
 842         * Makefile.in (ChangeLog): New makefile variable.
 843         * README-HACKING: Mention the ChangeLog makefile variable.
 844
 845 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 846
 847         * tic80/: Delete directory.
 848
 849 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 850
 851         * MAINTAINERS: Update my email address.
 852
 853 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 854
 855         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 856
 857 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 858
 859         * MAINTAINERS: Record self as a co-maintainer of just common/.
 860
 861 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 862
 863         * MAINTAINERS: Point to GDB files describing overall maintaince
 864         and check-in procedures.
 865
 866 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 867
 868         * MAINTAINERS: Add myself for ARM portions.
 869
 870 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 871
 872         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 873         * configure: Re-generate.
 874
 875 2001-02-16  Ben Elliston  <bje@redhat.com>
 876
 877         * MAINTAINERS: Add myself for common portions.
 878
 879 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 880
 881         * MAINTAINERS: Added self and Andrew for the mips sim.
 882
 883 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 884
 885         * MAINTAINERS: Added self and Andrew for the ppc sim.
 886
 887 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 888
 889         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 890         * m68hc11: New directory.
 891         * configure.in: Add.
 892         * configure: Regenerate.
 893
 894 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 895
 896         * tic80: New directory.
 897         * configure.in: Add configury.
 898         * configure: Regenerate.
 899
 900 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 901
 902         * configure.in (extra_subdirs): Add testsuite to strongarm
 903         directories.
 904         * configure: Regenerate.
 905
 906 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 907
 908         * MAINTAINERS: New file.  Blank.
 909
 910 1999-11-18  Ben Elliston  <bje@cygnus.com>
 911
 912         * configure.in: Require autoconf 2.13 and remove obsolete
 913         invocation of AC_C_CROSS.
 914         * configure: Regenerate.
 915
 916 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 917
 918         * configure.in: Configure the testsuite directory for thumb.
 919         * configure: Regenerate.
 920
 921 1999-07-16  Ben Elliston  <bje@cygnus.com>
 922
 923         * configure.in: Configure the testsuite directory for arm.
 924         * configure: Regenerate.
 925
 926 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 927
 928         * configure.in: Add support for MCore target.
 929         * configure: Regenerate.
 930
 931 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 932
 933         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 934         RUNTEST instead of commenting out, fixes portability problem.
 935
 936 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 937
 938         * configure.in: Add support for StrongARM target.
 939         * configure: Regenerate.
 940
 941 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 942
 943         * configure.in: Require autoconf 2.12.1 or higher.
 944
 945 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 946
 947         * configure.in (i960-*-*): Add.
 948         * configure: Rebuild.
 949
 950 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 951
 952         * configure.in: Added case for fr30-*-*.
 953         * configure: Regenerated.
 954
 955 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 956
 957         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 958         to allow successful operation on Windows.
 959
 960 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 961
 962         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 963         check can be invoked recursively.
 964
 965 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
 966
 967         * configure.in: Build simulator on sparclite and sparc86x targets.
 968         * configure: Regenerate.
 969
 970 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
 971
 972         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
 973         to autoconf and autoheader.
 974
 975 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
 976
 977         * Makefile.in (autoconf-common autoheader-common): Pass `-l
 978         ../common' to autoconf and autoheader.  Unconditionally run
 979         autoconf in every subdir.
 980         (autoconf-changelog autoheader-changelog): Unconditionally run
 981         commands in every subdir.
 982         (autoconf-install autoheader-install): Likewise.
 983
 984 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 985
 986         * Makefile.in:  Get SHELL from configure.
 987         * (FLAGS_TO_PASS):  Pass down SHELL.
 988         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
 989         NT native builds.
 990
 991 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 992
 993         * configure.in (extra_subdirs): Enable igen for mn10300.
 994         * configure: Re-generate.
 995
 996 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
 997
 998         * configure.in (extra_subdirs): Add support for thumb target.
 999
1000         * configure (extra_subdirs): Add support for thumb target.
1001
1002 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1003
1004         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1005         target.
1006         * configure: Regenerate.
1007
1008 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1009
1010         * configure.in (extra_subdirs): v850ea needs igen.
1011         * configure: Re-generate.
1012
1013 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1014
1015         * configure.in (testdir): When a testsuite directory, add that to
1016         the list of confdirs.
1017
1018 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1019
1020         * configure.in (extra_subdirs): Enable igen ready for V850.
1021
1022 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1023
1024         * configure.in (w65-*-*, only_if_enabled): Set.
1025         * configure: Re-generate.
1026
1027 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1028
1029         * configure.in (sparc*-*-*, only_if_enabled): Set
1030         only_if_enabled=yes.  Check only_if_enabled before enabling a
1031         simulator.
1032         * configure: Regenerate.
1033
1034 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1035
1036         * configure.in (extra_subdirs): Add v850e target.
1037
1038 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1039
1040         * configure.in (extra_subdirs): Add v850ea target.
1041
1042 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1043
1044         * configure.in (sparc*-*-*): Don't build erc32.
1045         * configure: Regenerate.
1046
1047 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1048
1049         * configure.in (m32r-*-*): New target.
1050         * configure: Regenerate.
1051
1052         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1053
1054 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1055
1056         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1057         thought that .NOEXPORT was the default target.
1058
1059 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1060
1061         * Makefile.in (clean mostlyclean): Restore targets accidentally
1062         deleted in earlier change.
1063
1064 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1065
1066         * Makefile.in (autoheader-common, autoheader-changelog,
1067         autoheader-install): Perform autoheader in addition to autoconf.
1068
1069 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1070
1071         * Makefile.in (autoconf-install): New target.
1072         (autoconf-changelog): Try different way to obtain user name.
1073
1074 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1075
1076         * Makefile.in (autoconf-changelog): New target, update
1077         ChangeLog for all subdirectories - normally used after
1078         autoconf-common target.
1079
1080 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1081
1082         * configure.in (extra_subdirs): Include testsuite for d30v.
1083         * configure: Regenerate.
1084
1085         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1086         ../gdb/Makefile.in
1087         (check): New rules - drive the testsuite.
1088
1089 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1090
1091         * configure.in: Add mn10200 configure lines accidentally
1092         removed.
1093         * configure: Regenerated.
1094
1095 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1096
1097         * configure.in (extra_subdirs): Generalize common sub directory
1098         into a list.
1099         (extra_subdirs): For d30v add igen to the list to be built.
1100
1101 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1102
1103         * configure.in (d30v): New target.
1104         * configure: Regenerated.
1105
1106 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1107
1108         * configure.in: Don't require GCC to build the mn10200
1109         simulator anymore.
1110         * configure: Rebuilt.
1111
1112 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1113
1114         * configure.in: Don't configure any subdirs if no simulator
1115         is being built.  Don't use erc32 for sparc64.
1116         * configure: Regenerated.
1117
1118 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1119
1120         * Makefile.in (autoconf-common): New target.
1121         * configure.in: Do configure common.
1122         * configure: Regenerated.
1123
1124 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1125
1126         * configure configure.in:  Don't configure common anymore.  Files
1127         from common are now built in the individual simualtor directories.
1128         This fixes problems with the WinGDB build procedure.
1129
1130 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1131
1132         * configure: Enable the mn10200 simulator.
1133
1134 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1135
1136         * configure.in (configdirs): Add common.
1137         * configure: Regenerated.
1138
1139 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1140
1141         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1142         system V based targets.
1143         * configure: Regenerate.
1144
1145 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1146
1147         * configure.in (--enable-sim-powerpc): Delete.
1148         (--enable-sim): Add.
1149         * configure: Regenerated.
1150
1151 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1152
1153         * configure.in: Only build the V850 simulator if
1154         we are using gcc.
1155         * configure: Rebuild.
1156
1157 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1158
1159         * configure.in: Do build erc32 for DOS and Windows hosts.
1160         * configure: Rebuild.
1161
1162 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1163
1164         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1165         be inherited from the parent.  Remove INSTALL_XFORM and
1166         INSTALL_XFORM1.  Make INSTALL be set from configure.
1167
1168 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1169
1170         * configure.in: Only build the MIPS simulator if we are using
1171         gcc.
1172         * configure: Rebuild.
1173
1174 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1175
1176         * configure.in (v850-*-*): Added V850 simulator.
1177
1178 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1179
1180         * configure.in (d10v-*-*): Added D10V simulator.
1181
1182 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1183
1184         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1185         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1186         (docdir): Removed.
1187         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1188         (AC_PROG_INSTALL): Added.
1189         * configure: Rebuilt.
1190
1191 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1192
1193         * configure.in: Only configure erc32 if using gcc.
1194         * configure: Rebuild.
1195
1196 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1197
1198         * configure.in (sim_target): Build PowerPC simulator for powerpc
1199         System V.4, Solaris, and Elf targets.
1200         * configure: Regenerate with autoconf 2.10.
1201
1202 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1203
1204         * configure.in: Only built erc32 simulator on Unix hosts as it
1205         uses pseudo ttys.
1206         * configure: Regenerated with autoconf 2.8.
1207
1208 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1209
1210         * erc32: Sparc simulator from the ESA.
1211
1212 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1213
1214         From: Miles Bader  <miles@gnu.ai.mit.edu>
1215         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1216         * configure: Regenerate using autoconf.
1217
1218 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1219
1220         * Makefile.in (install): Fix typo.
1221
1222 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1223
1224         * configure: Regenerate with autoconf 2.7.
1225
1226         * Makefile.in (all): Simplify.
1227         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1228         as in the all target.
1229         (distclean, maintainer-clean, realclean): Likewise.
1230         (install): Likewise.
1231
1232 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1233
1234         * Makefile.in (all): Remove extra '\' char from shell script.
1235
1236 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1237
1238         * Makefile.in (all): Avoid a for loop with zero elements, even if
1239         the loop will not be executed because of an if statement.
1240
1241 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1242
1243         * Makefile.in (install): Add missing semicolon in "fi \".
1244
1245 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1246
1247         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1248         defaults from configure.
1249
1250         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1251         configure defaults.
1252         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1253         if either --enable-sim-powerpc is used, or the host compiler is
1254         GCC.
1255
1256 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1257
1258         * configure.in (mips*-*-*): Added "mips" simulator target.
1259         * configure: Re-generated.
1260
1261 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1262
1263         * Makefile.in (BISON): Remove macro.
1264         (FLAGS_TO_PASS): Remove BISON.
1265
1266 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1267
1268         * configure.in:  Explicitly `exit 0' for broken shells.
1269         * configure:  Rebuilt.
1270
1271 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1272
1273         * common/run.c (main): Initialize the callbacks.
1274
1275 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1276
1277         * Makefile.in (maintainer-clean): New synonym for realclean.
1278
1279 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1280
1281         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1282         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1283
1284 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1285
1286         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1287         <cagney@highland.com.au>.
1288         * configure: Regnerate from configure.in.
1289
1290 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1291
1292         * Update all FSF addresses except those in COPYING* files.
1293
1294 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1295
1296         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1297         submakes either default or passed in value.
1298
1299 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1300
1301         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1302           install): Changed targets so that they descend all
1303           subdirectories in $(SUBDIRS).
1304           (*-all, *-clean, *-install): Removed targets.
1305
1306         * configure.in: Don't bother with target makefile fragments, they
1307           are no longer needed.
1308         * configure: regenerated.
1309
1310         * Makefile.in, configure.in: converted to autoconf.
1311         * configure: New file, generated with autconf 2.4.
1312
1313 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1314
1315         * Makefile.in: Support ARM.
1316         * configure.in: Ditto.
1317
1318 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1319
1320         * Makefile.in: Support W65.
1321         * configure.in: Ditto.
1322
1323 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1324
1325         * Makefile.in: Add TAGS target.
1326
1327 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1328
1329         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1330           install-h8300, clean-h8300, all-h8500, install-h8500,
1331           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1332           recursion lines.
1333
1334 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1335
1336         * Makefile.in: remove endian.h trace from h8500
1337
1338 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1339
1340         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1341
1342 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1343
1344         * Makefile.in: make all of the all-* target (except all-nothing)
1345         depend on endian.h, so that if we're not building a simulator, we
1346         don't built endian
1347
1348 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1349
1350         * Makefile.in (check, installcheck): Added dummy targets.
1351
1352 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1353
1354         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1355         explicitly make it, since some makes apparently don't work with
1356         VPATH and .c to executable rules (SunOS make for example).
1357
1358 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1359
1360         * Makefile.in (endian): Add explicit rule for broken makes.
1361
1362 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1363
1364         * Makefile.in (info, install-info): New targets.
1365         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1366         level Makefile.
1367
1368 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1369
1370         * Makefile.in (endian.h): build endian.h via a temporary file so
1371           that we don't leave an incomplete file lying around on
1372           interrupted builds.
1373           (clean): remove endian, e.h, and endian.h.
1374
1375 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1376
1377         * Makefile.in, configure.in: if target isn't supported, build a
1378         harmless makefile.
1379
1380