]> git.ipfire.org Git - thirdparty/binutils-gdb.git/blob - sim/ChangeLog
sim: require a C11 compiler
[thirdparty/binutils-gdb.git] / sim / ChangeLog
1 2021-01-08 Mike Frysinger <vapier@gentoo.org>
2
3 * README-HACKING (C Language Assumptions): Require C11 compiler.
4
5 2020-09-03 Jose E. Marchesi <jose.marchesi@oracle.com>
6
7 * configure.ac: Do not configure sim/testsuite nor sim/igen if the
8 primary target doesn't have a simulator.
9 * configure: Regenerate.
10
11 2020-08-04 Jose E. Marchesi <jose.marchesi@oracle.com>
12 David Faust <david.faust@oracle.com>
13
14 * configure.tgt (sim_arch): Add entry for bpf-*-*.
15 * configure: Regenerate.
16 * MAINTAINERS: Add maintainer for the BPF simulator.
17
18 2019-12-19 Tom Tromey <tromey@adacore.com>
19
20 PR build/24572:
21 * Makefile.in (install-strip): New target.
22
23 2019-09-23 Dimitar Dimitrov <dimitar@dinux.eu>
24
25 * MAINTAINERS: Add myself as PRU maintainer.
26 * configure: Regenerated.
27 * configure.tgt: Add PRU.
28
29 2019-09-18 Alan Modra <amodra@gmail.com>
30
31 * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
32 * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
33 * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
34 * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
35 * rx/trace.c: Update throughout for bfd section macro changes.
36
37 2019-02-28 Joel Brobecker <brobecker@adacore.com>
38
39 * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
40
41 2019-02-13 Simon Marchi <simon.marchi@ericsson.com>
42
43 * MAINTAINERS: Add Andrew Burgess as global maintainer.
44
45 2019-01-03 Pavel I. Kryukov <kryukov@frtk.ru>
46
47 * sim-base.h: Add 'extern C' if header is compiled with C++.
48
49 2018-12-06 Andrew Burgess <andrew.burgess@embecosm.com>
50
51 * common/acinclude.m4 (enable-cgen-maint): Support passing path to
52 cgen source tree.
53 * cris/configure: Regenerate.
54 * frv/configure: Regenerate.
55 * iq2000/configure: Regenerate.
56 * lm32/configure: Regenerate.
57 * m32r/configure: Regenerate.
58 * or1k/configure: Regenerate.
59 * sh64/configure: Regenerate.
60
61 2018-07-20 Maciej W. Rozycki <macro@mips.com>
62
63 * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
64 ISA maintenance.
65
66 2018-07-19 DJ Delorie <dj@redhat.com>
67
68 * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
69
70 2018-07-14 Stafford Horne <shorne@gmail.com>
71
72 * MAINTAINERS (or1k): Add myself as or1k maintainer.
73
74 2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
75
76 * All configure.ac: Remove AC_PREREQ.
77 * All configure: Re-generate.
78
79 2018-01-22 Maciej W. Rozycki <macro@mips.com>
80
81 * MAINTAINERS: Update my company e-mail address.
82
83 2017-12-12 Stafford Horne <shorne@gmail.com>
84 Peter Gavin <pgavin@gmail.com>
85
86 * configure: Regenerated.
87
88 2017-12-12 Stafford Horne <shorne@gmail.com>
89 Peter Gavin <pgavin@gmail.com>
90
91 * configure.tgt: Add or1k sim.
92
93 2017-10-12 James Bowman <james.bowman@ftdichip.com>
94
95 * MAINTAINERS (ft32): Add myself.
96
97 2017-10-03 Jim Wilson <wilson@tuliptree.org>
98
99 * MAINTAINERS (aarch64): Update my email address.
100
101 2017-09-06 John Baldwin <jhb@FreeBSD.org>
102
103 * configure.ac: Honor existing CC_FOR_BUILD in environment.
104 * configure: Regenerate.
105
106 2017-02-14 Jim Wilson <jim.wilson@linaro.org>
107
108 * MAINTAINTERS (aarch64): Add myself.
109
110 2016-12-14 Maciej W. Rozycki <macro@imgtec.com>
111
112 * MAINTAINERS (Maintainers for particular sims): Add myself as
113 a MIPS maintainer.
114
115 2016-02-03 Maciej W. Rozycki <macro@linux-mips.org>
116
117 * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
118
119 2016-01-09 Mike Frysinger <vapier@gentoo.org>
120
121 * configure.ac: Delete sim_common check and the
122 AC_CONFIG_SUBDIRS(common) call.
123 * configure: Regenerate.
124 * configure.tgt (sim_common): Delete the variable.
125
126 2016-01-09 Mike Frysinger <vapier@gentoo.org>
127
128 * .gitignore: Delete /common/cconfig.h entry.
129
130 2016-01-05 Nick Clifton <nickc@redhat.com>
131
132 * MAINTAINERS: Add myself as AArch64 sim maintainer.
133
134 2015-12-09 Tristan Gingold <gingold@adacore.com>
135
136 * aarch64/simulator.c: Remove syscall.h include.
137
138 2015-12-26 Mike Frysinger <vapier@gentoo.org>
139
140 * README-HACKING: Delete mention of tconfig.h.
141
142 2015-11-24 Nick Clifton <nickc@redhat.com>
143
144 * configure.tgt: Add aarch64 entry.
145 * configure: Regenerate.
146
147 2015-06-23 Mike Frysinger <vapier@gentoo.org>
148
149 * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
150 * configure: Regenerate.
151
152 2015-06-12 Mike Frysinger <vapier@gentoo.org>
153
154 * README-HACKING: Change configure.in to configure.ac.
155
156 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
157
158 * arm/configure: Regenerated.
159 * avr/configure: Likewise.
160 * bfin/configure: Likewise.
161 * common/configure: Likewise.
162 * cr16/configure: Likewise.
163 * cris/configure: Likewise.
164 * d10v/configure: Likewise.
165 * erc32/configure: Likewise.
166 * frv/configure: Likewise.
167 * ft32/configure: Likewise.
168 * h8300/configure: Likewise.
169 * igen/configure: Likewise.
170 * iq2000/configure: Likewise.
171 * lm32/configure: Likewise.
172 * m32c/configure: Likewise.
173 * m32r/configure: Likewise.
174 * m68hc11/configure: Likewise.
175 * mcore/configure: Likewise.
176 * microblaze/configure: Likewise.
177 * mips/configure: Likewise.
178 * mn10300/configure: Likewise.
179 * moxie/configure: Likewise.
180 * msp430/configure: Likewise.
181 * ppc/configure: Likewise.
182 * rl78/configure: Likewise.
183 * rx/configure: Likewise.
184 * sh/configure: Likewise.
185 * sh64/configure: Likewise.
186 * v850/configure: Likewise.
187
188 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
189
190 * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
191 (BFD_LIB): Remove $(ZLIB).
192 (CONFIG_LIBS): Add $(ZLIB).
193 * ppc/Makefile.in (ZLIBINC): Removed.
194 (INCLUDES): Remove $(ZLIBINC).
195 (BFD_LIB): Remove $(ZLIB).
196
197 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
198
199 * arm/configure: Regenerated.
200 * avr/configure: Likewise.
201 * bfin/configure: Likewise.
202 * common/configure: Likewise.
203 * cr16/configure: Likewise.
204 * cris/configure: Likewise.
205 * d10v/configure: Likewise.
206 * erc32/configure: Likewise.
207 * frv/configure: Likewise.
208 * ft32/configure: Likewise.
209 * h8300/configure: Likewise.
210 * igen/configure: Likewise.
211 * iq2000/configure: Likewise.
212 * lm32/configure: Likewise.
213 * m32c/configure: Likewise.
214 * m32r/configure: Likewise.
215 * m68hc11/configure: Likewise.
216 * mcore/configure: Likewise.
217 * microblaze/configure: Likewise.
218 * mips/configure: Likewise.
219 * mn10300/configure: Likewise.
220 * moxie/configure: Likewise.
221 * msp430/configure: Likewise.
222 * ppc/configure: Likewise.
223 * rl78/configure: Likewise.
224 * rx/configure: Likewise.
225 * sh/configure: Likewise.
226 * sh64/configure: Likewise.
227 * v850/configure: Likewise.
228
229 2015-03-29 Mike Frysinger <vapier@gentoo.org>
230
231 * configure: Regenerate.
232 * configure.ac: Delete sim_testsuite check and config in testsuite.
233 * configure.tgt (sim_testsuite): Delete everywhere.
234
235 2015-03-28 Mike Frysinger <vapier@gentoo.org>
236
237 * configure: Regenerate.
238 * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
239
240 2015-03-28 James Bowman <james.bowman@ftdichip.com>
241
242 * configure.tgt: Add FT32 entry.
243 * configure: Regenerate.
244
245 2015-03-16 Mike Frysinger <vapier@gentoo.org>
246
247 * .gitignore: Delete tconfig.h.
248 * README-HACKING: Change tconfig.in to tconfig.h.
249
250 2014-03-12 Nick Clifton <nickc@redhat.com>
251
252 * MAINTAINERS: Add myself as the maintainer for the MSP430.
253
254 2014-03-10 Mike Frysinger <vapier@gentoo.org>
255
256 * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
257 * configure: Regenerate.
258
259 2014-01-06 Tom Tromey <tromey@redhat.com>
260
261 * common/cgen-trace.c: Don't use old VA_* macros.
262 * common/sim-load.c (xprintf): Likewise.
263 * common/sim-trace.c (trace_printf, debug_printf): Likewise.
264
265 2014-01-06 Tom Tromey <tromey@redhat.com>
266
267 * README-HACKING: Don't use PARAMS.
268 * arm/wrapper.c: Don't use PARAMS.
269 * bfin/sim-main.h: Don't use PARAMS.
270 * common/callback.c: Don't use PARAMS.
271 * common/cgen-trace.c: Don't use PARAMS.
272 * common/run-sim.h: Don't use PARAMS.
273 * common/run.c: Don't use PARAMS.
274 * common/sim-base.h: Don't use PARAMS.
275 * common/sim-load.c: Don't use PARAMS.
276 * common/sim-options.h: Don't use PARAMS.
277 * common/sim-trace.c: Don't use PARAMS.
278 * common/sim-trace.h: Don't use PARAMS.
279 * common/sim-utils.h: Don't use PARAMS.
280 * cr16/cr16_sim.h: Don't use PARAMS.
281 * cr16/gencode.c: Don't use PARAMS.
282 * cr16/interp.c: Don't use PARAMS.
283 * cr16/simops.c: Don't use PARAMS.
284 * d10v/d10v_sim.h: Don't use PARAMS.
285 * d10v/gencode.c: Don't use PARAMS.
286 * d10v/interp.c: Don't use PARAMS.
287 * d10v/simops.c: Don't use PARAMS.
288 * erc32/erc32.c: Don't use PARAMS.
289 * erc32/exec.c: Don't use PARAMS.
290 * erc32/float.c: Don't use PARAMS.
291 * erc32/func.c: Don't use PARAMS.
292 * erc32/sis.c: Don't use PARAMS.
293 * erc32/sis.h: Don't use PARAMS.
294 * mips/interp.c: Don't use PARAMS.
295 * mips/sim-main.h: Don't use PARAMS.
296 * sh/interp.c: Don't use PARAMS.
297 * v850/sim-main.h: Don't use PARAMS.
298 * v850/v850_sim.h: Don't use PARAMS.
299
300 2013-11-07 Will Newton <will.newton@linaro.org>
301
302 PR gdb/15508
303 * arm/wrapper.c (sim_create_inferior): Call init before
304 accessing STATE.
305
306 2013-11-07 Will Newton <will.newton@linaro.org>
307
308 PR gdb/8989
309 * arm/wrapper.c (sim_create_inferior): Avoid calling
310 bfd_get_mach with a NULL bfd.
311
312 2013-06-21 Nick Clifton <nickc@redhat.com>
313
314 * msp430: New Directory.
315 * configure.tgt: Add it.
316 * configure: Regenerate.
317
318 2013-03-15 Steve Ellcey <sellcey@mips.com>
319
320 * arm/wrapper.c (sim_complete_command): Make char arguments const.
321 * avr/interp.c (sim_complete_command): Ditto.
322 * common/sim-options.c (sim_complete_command): Ditto.
323 * cr16/interp.c (sim_complete_command): Ditto.
324 * erc32/interf.c (sim_complete_command): Ditto.
325 * m32c/gdb-if.c (sim_complete_command): Ditto.
326 * microblaze/interp.c (sim_complete_command): Ditto.
327 * ppc/sim_calls.c (sim_complete_command): Ditto.
328 * rl78/gdb-if.c (sim_complete_command): Ditto.
329 * rx/gdb-if.c (sim_complete_command): Ditto.
330 * sh/interp.c (sim_complete_command): Ditto.
331
332 2013-01-01 Joel Brobecker <brobecker@adacore.com>
333
334 Update year range in copyright notice of all files.
335
336 2012-12-19 Joel Brobecker <brobecker@adacore.com>
337
338 Update old contact info in GPL license notices.
339
340 2012-12-19 Joel Brobecker <brobecker@adacore.com>
341
342 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
343
344 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
345
346 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
347 condition.
348 * common/acinclude.m4: Define lt_cv_dlopen_libs.
349 * arm/configure: Regenerate.
350 * avr/configure: Regenerate.
351 * bfin/configure: Regenerate.
352 * common/configure: Regenerate.
353 * cr16/configure: Regenerate.
354 * cris/configure: Regenerate.
355 * d10v/configure: Regenerate.
356 * erc32/configure: Regenerate.
357 * frv/configure: Regenerate.
358 * h8300/configure: Regenerate.
359 * igen/configure: Regenerate.
360 * iq2000/configure: Regenerate.
361 * lm32/configure: Regenerate.
362 * m32c/configure: Regenerate.
363 * m32r/configure: Regenerate.
364 * m68hc11/configure: Regenerate.
365 * mcore/configure: Regenerate.
366 * microblaze/configure: Regenerate.
367 * mips/configure: Regenerate.
368 * mn10300/configure: Regenerate.
369 * moxie/configure: Regenerate.
370 * ppc/configure: Regenerate.
371 * rl78/configure: Regenerate.
372 * rx/configure: Regenerate.
373 * sh/configure: Regenerate.
374 * sh64/configure: Regenerate.
375 * testsuite/configure: Regenerate.
376 * v850/configure: Regenerate.
377
378 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
379
380 * MAINTAINERS: Update my email address.
381
382 2012-09-24 Steve Ellcey <sellcey@mips.com>
383
384 * mips/basic.exp: Add mips*-mti-elf* target.
385 * configure.ac: Add mips*-mti-elf* target.
386 * configure: Regenerate.
387
388 2012-06-15 Joel Brobecker <brobecker@adacore.com>
389
390 * configure: Regenerate.
391
392 2012-06-06 Michael Eager <eager@eagercon.com>
393
394 * microblaze/interp.c (config.h): Add #include.
395
396 2011-11-29 Joel Brobecker <brobecker@adacore.com>
397
398 * MAINTAINERS (Global Maintainers): New section. Add Mike
399 Frysinger.
400
401 2011-11-28 DJ Delorie <dj@redhat.com>
402
403 * configure.tgt: Add rl78 support.
404 * configure: Regenerate.
405 * rl78: New directory.
406 * MAINTAINERS: Add myself as RL78 maintainer.
407
408 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
409
410 * MAINTAINERS: Remove Thiemo Seufer.
411
412 2011-06-04 Mike Frysinger <vapier@gentoo.org>
413
414 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
415 * configure: Regenerate.
416
417 2011-05-04 Joseph Myers <joseph@codesourcery.com>
418
419 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
420 handle targets.
421 * configure: Regenerate.
422
423 2011-03-05 Mike Frysinger <vapier@gentoo.org>
424
425 * MAINTAINERS: Add bfin entry.
426 * configure.tgt (bfin-*-*): Handle bfin targets.
427 * configure: Regenerate.
428
429 2011-01-05 Mike Frysinger <vapier@gentoo.org>
430
431 * .gitignore: Add /*/hw-config.h.
432
433 2010-12-23 Mike Frysinger <vapier@gentoo.org>
434
435 * .gitignore: New file.
436
437 2010-07-28 DJ Delorie <dj@redhat.com>
438
439 * MAINTAINERS: Add self as RX maintainer. Sort list.
440
441 2010-06-08 Nick Clifton <nickc@redhat.com>
442
443 * reg.c (set_oszc): Use unsigned int for the mask.
444 (set_szc, set_osz, set_sz): Likewise.
445
446 2010-04-26 Mike Frysinger <vapier@gentoo.org>
447
448 * configure.ac: Target logic moved out to and included from ...
449 * configure.tgt: ... this new file.
450 * configure: Regenerated.
451
452 2010-04-12 Mike Frysinger <vapier@gentoo.org>
453
454 * README-HACKING: Add more sections.
455
456 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
457
458 * avr/configure: Regenerate.
459 * cris/configure: Regenerate.
460 * microblaze/configure: Regenerate.
461
462 2009-11-24 Joel Brobecker <brobecker@adacore.com>
463
464 * common/aclocal.m4: Add include of ../../config/zlib.m4.
465 * common/common.m4: Use AM_ZLIB to check for zlib support.
466 * ppc/configure.ac: Likewise.
467 * arm/configure, avr/configure, common/configure, cr16/configure,
468 cris/configure, d10v/configure, erc32/configure, frv/configure,
469 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
470 m32r/configure, m68hc11/configure, mcore/configure,
471 microblaze/configure, mips/configure, mn10300/configure,
472 moxie/configure, ppc/configure, sh/configure, sh64/configure,
473 v850/configure: Regenerate.
474
475 2009-11-24 DJ Delorie <dj@redhat.com>
476
477 * rx: New directory.
478 * configure.ac: Add entry for Renesas RX.
479 * configure: Regenerate.
480
481 2009-10-16 Doug Evans <dje@sebabeach.org>
482
483 * MAINTAINERS: Add myself as m32r maintainer.
484
485 2009-10-15 Michael Egaer <eager@eagercon.com>
486
487 * MAINTAINERS: Add self as MicroBlaze maintainer.
488
489 2009-10-14 Ben Elliston <bje@gnu.org>
490
491 * MAINTAINERS (common): Move myself to "past maintainers" section.
492
493 2009-10-06 Michael Eager <eager@eagercon.com>
494
495 * microblaze/interp.c: Add include microblaze-dis.h.
496
497 2009-09-23 Michael Eager <eager@eagercon.com>
498
499 * configure: Add microblaze-*.* (not regenerated).
500 * configure.ac: Likewise.
501 * microblaze/config.in: New.
502 * microblaze/configure: Generate.
503 * microblaze/configure.ac: New.
504 * microblaze/interp.c: New.
505 * microblaze/Makefile.in: New.
506 * microblaze/microblaze.h: New.
507 * microblaze/microblaze.isa: New.
508 * microblaze/sim-main.h: New.
509 * microblaze/sysdep.h: New.
510
511 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
512
513 * avr/config.in: Regenerate.
514 * avr/configure: Likewise.
515 * configure: Likewise.
516 * cris/config.in: Likewise.
517 * cris/configure: Likewise.
518
519 * configure.ac: m4_include toplevel config/override.m4.
520 * configure: Regenerate.
521 * avr/configure: Regenerate.
522 * cris/configure: Regenerate.
523
524 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
525
526 * Makefile.in (datarootdir): New variable.
527
528 2009-05-18 Jon Beniston <jon@beniston.com>
529
530 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
531 * configure.ac: Add lm32 target.
532 * lm32: New directory.
533
534 2009-05-11 Andrew Cagney <cagney@gnu.org>
535
536 * MAINTAINERS: Orphan ppc.
537
538 2009-04-30 Anthony Green <green@moxielogic.com>
539
540 * MAINTAINERS: Add myself for the moxie port.
541 * moxie: New directory.
542 * configure.ac: Add entry for moxie.
543 * configure: Regenerate.
544
545 2009-04-27 Tristan Gingold <gingold@adacore.com>
546
547 * avr: New directory.
548 * configure.ac: Add avr.
549 * configure: Regenerated.
550
551 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
552
553 * Makefile.in: Add dummy install-pdf, html, and
554 install-html targets.
555
556 2008-07-29 Nick Clifton <nickc@redhat.com>
557
558 * common/genmloop.sh: Add new parameter: -shell to specify the
559 command interpreter to use to run the input file. This is
560 necessary because otherwise SHELL is taken from the user's
561 environment, and not from the makefile that invoked this script
562 and the user might not be running an sh-like shell.
563 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
564 * fr30/Makefile.in: Likewise.
565 * frv/Makefile.in: Likewise.
566 * i960/Makefile.in: Likewise.
567 * iq2000/Makefile.in: Likewise.
568 * m32r/Makefile.in: Likewise.
569
570 * frv/mloop.in: Add missing start of line comment marker.
571
572 2008-05-09 Olivier Hainque <hainque@adacore.com>
573
574 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
575
576 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
577
578 * MAINTAINERS: Add myself as maintainer of cr16 port.
579
580 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
581
582 Add simulator for National cr16 processor.
583 * cr16: New directory.
584 * configure.ac: Add entry for National cr16.
585 * configure: Regenerate.
586
587 2008-02-05 DJ Delorie <dj@redhat.com>
588
589 * configure.ac (v850): V850 now has a testsuite.
590 * configure (v850): Likewise.
591
592 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
593
594 Updated copyright notices for most files.
595
596 2007-12-19 DJ Delorie <dj@redhat.com>
597
598 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
599 cut_point.
600
601 2007-08-24 Joel Brobecker <brobecker@adacore.com>
602
603 Switch the license of all files explicitly copyright the FSF
604 to GPLv3.
605
606 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
607
608 * Makefile.in: Add dummy "pdf" target.
609
610 2007-02-16 Thiemo Seufer <ths@mips.com>
611
612 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
613
614 2007-01-28 Manuel Lauss <slauss@resi.at>
615
616 * configure.ac (sh64-*-*): Change to sh64*-*-*.
617 (sh-*-*): Change to sh*-*-*.
618 * configure: Regenerated.
619
620 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
621
622 Updated copyright notices for most files.
623
624 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
625
626 * Makefile.in (autoconf-common autoheader-common): Only run
627 autoheader on subdirs with a file config.in.
628
629 * configure.ac (common): Make the default "yes" for all targets
630 with sim subdirs.
631 * configure: Regenerate.
632
633 * Makefile.in (autoconf-common autoheader-common): In documented
634 usage, say SHELL=/bin/sh.
635 (.PHONY): Add autoheader-common.
636
637 * MAINTAINERS: Add self as authorized committer for *.
638
639 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
640
641 * MAINTAINERS: Add Dave Brolley for sh64.
642
643 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
644
645 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
646 * Makefile.in (FLAGS_TO_PASS): Include libdir.
647 * configure: Regenerated.
648
649 2006-05-05 Andreas Schwab <schwab@suse.de>
650
651 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
652 * configure: Regenerate.
653
654 * Makefile.in (CFLAGS_FOR_BUILD): Define.
655 (CC_FOR_BUILD): Don't override.
656 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
657
658 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
659
660 * MAINTAINERS: Add an "Authorized committers" section, and list
661 DJ Delorie for v850.
662
663 2006-03-13 DJ Delorie <dj@redhat.com>
664
665 * MAINTAINERS: Add self as m32c sim maintainer.
666
667 2006-01-23 Jim Blandy <jimb@redhat.com>
668
669 Add simulator for Renesas M32C and M16C.
670
671 * m32c: New directory.
672 * configure.ac: Add entry for Renesas M32C.
673 * configure: Regenerate.
674
675 2005-05-26 Chris Demetriou <cgd@netbsd.org>
676
677 * MAINTAINERS: Update my mail address, move myself to the
678 "Past maintainers" section.
679
680 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
681
682 * configure.ac: Add igen to v850 build.
683 * configure: Regenerate.
684
685 2005-04-29 Paul Brook <paul@codesourcery.com>
686
687 * common/callback.c (PIPE_BUF): Provide default definition.
688 (os_lstat): Use stat if lstat is not available on the host.
689 (os_ftruncate): Return EINVAL if not available on the host.
690 (os_truncate): Ditto.
691 * common/configure.ac: Check for lstat, truncate and ftruncate.
692 * common/configure: Regenerate.
693 * common/config.in: Regenerate.
694
695 2005-04-27 Paul Brook <paul@codesourcery.com>
696
697 * common/Make-common.in: Add $(EXEEXT) to "run".
698
699 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
700
701 * configure.ac: Add explicit sh64 case.
702 * configure: Regenerate.
703
704 2005-03-30 Paul Brook <paul@codesourcery.com>
705
706 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
707
708 2005-02-28 Jim Blandy <jimb@redhat.com>
709
710 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
711 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
712 Regenerated, after change to common/aclocal.m4.
713
714 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
715
716 * iq2000: New target subdirectory.
717 * configure.ac: Add iq2000 target.
718 * configure: Regenerate.
719
720 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
721
722 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
723 (realclean, install): Fail if subdir make failed.
724
725 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
726
727 * cris: New directory, simulator for Axis Communications CRIS
728 including CRIS v32, CGEN-based.
729 * configure.ac: Add corresponding configury.
730 * configure: Regenerate.
731
732 2005-01-17 Andrew Cagney <cagney@gnu.org>
733
734 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
735 common directory. Remove sparc*-*-* from list.
736
737 2005-01-11 Andrew Cagney <cagney@gnu.org>
738
739 * Makefile.in (autoconf-common autoheader-common): Add --force to
740 autoconf and autoheader.
741 (autoconf-common autoheader-common)
742 (autoconf-install autoheader-install): Check for configure.ac, not
743 configure.in.
744 * configure.ac: Delete AC_CONFIG_AUX_DIR.
745 * configure: Re-generate.
746
747 2005-01-07 Andrew Cagney <cagney@gnu.org>
748
749 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
750 correctly calls AC_CONFIG_SUBDIRS.
751 * configure: Re-generate.
752
753 2004-12-01 Andrew Cagney <cagney@gnu.org>
754
755 * i960, h8500: Delete directory.
756
757 2004-11-12 Andrew Cagney <cagney@gnu.org>
758
759 * d30v, fr30, mn10200, z8k: Delete directory.
760
761 2004-03-10 Ben Elliston <bje@gnu.org>
762
763 * MAINTAINERS: Update my mail address.
764
765 2004-01-26 Chris Demetriou <cgd@broadcom.com>
766
767 * configure.in (mips*-*-*): Configure in testsuite.
768 * configure: Regenerate.
769
770 2003-10-08 Dave Brolley <brolley@redhat.com>
771
772 * configure.in: Move frv handling to alphabetically correct placement.
773
774 2003-09-03 Andreas Schwab <schwab@suse.de>
775
776 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
777
778 2003-08-29 Dave Brolley <brolley@redhat.com>
779
780 * MAINTAINERS: Add myself as maintainer of the FRV port.
781
782 2003-08-20 Michael Snyder <msnyder@redhat.com>
783 Dave Brolley <brolley@redhat.com>
784
785 * frv/: New directory, simulator for the Fujitsu FRV.
786 * configure.in: Add frv configury.
787 * configure: Regenerate.
788
789 2003-08-10 Ben Elliston <bje@wasabisystems.com>
790
791 * MAINTAINERS: Update my mail address.
792
793 2003-08-09 Andrew Cagney <cagney@redhat.com>
794
795 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
796 maintenance. List igen and sh maintainers. Mention that target
797 and global maintainers pick up the slack.
798
799 2003-07-09 Michael Snyder <msnyder@redhat.com>
800
801 * configure.in: Add testsuite to extra_subdirs for sh.
802 * configure: Regenerate.
803
804 2003-01-23 Nick Clifton <nickc@redhat.com>
805
806 * Add sh2e support:
807
808 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
809
810 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
811
812 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
813
814 * MAINTAINERS: Update my email address.
815
816 2002-07-17 Andrew Cagney <ac131313@redhat.com>
817
818 * w65/: Delete directory.
819
820 2002-07-16 Andrew Cagney <ac131313@redhat.com>
821
822 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
823 * configure: Re-generate.
824
825 2002-07-13 Andrew Cagney <ac131313@redhat.com>
826
827 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
828 * configure: Re-generate.
829
830 2002-06-16 Andrew Cagney <ac131313@redhat.com>
831
832 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
833 id, date and host to be overriden by NAME, ID, DATE and HOST
834 respectfully. Use ISO dates.
835
836 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
837
838 * Makefile.in (ChangeLog): New makefile variable.
839 * README-HACKING: Mention the ChangeLog makefile variable.
840
841 2002-06-01 Andrew Cagney <ac131313@redhat.com>
842
843 * tic80/: Delete directory.
844
845 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
846
847 * MAINTAINERS: Update my email address.
848
849 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
850
851 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
852
853 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
854
855 * MAINTAINERS: Record self as a co-maintainer of just common/.
856
857 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
858
859 * MAINTAINERS: Point to GDB files describing overall maintaince
860 and check-in procedures.
861
862 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
863
864 * MAINTAINERS: Add myself for ARM portions.
865
866 2001-10-19 Andrew Cagney <ac131313@redhat.com>
867
868 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
869 * configure: Re-generate.
870
871 2001-02-16 Ben Elliston <bje@redhat.com>
872
873 * MAINTAINERS: Add myself for common portions.
874
875 2001-01-15 Chris Demetriou <cgd@broadcom.com>
876
877 * MAINTAINERS: Added self and Andrew for the mips sim.
878
879 2000-10-25 Geoff Keating <geoffk@cygnus.com>
880
881 * MAINTAINERS: Added self and Andrew for the ppc sim.
882
883 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
884
885 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
886 * m68hc11: New directory.
887 * configure.in: Add.
888 * configure: Regenerate.
889
890 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
891
892 * tic80: New directory.
893 * configure.in: Add configury.
894 * configure: Regenerate.
895
896 2000-04-20 Nick Clifton <nickc@cygnus.com>
897
898 * configure.in (extra_subdirs): Add testsuite to strongarm
899 directories.
900 * configure: Regenerate.
901
902 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
903
904 * MAINTAINERS: New file. Blank.
905
906 1999-11-18 Ben Elliston <bje@cygnus.com>
907
908 * configure.in: Require autoconf 2.13 and remove obsolete
909 invocation of AC_C_CROSS.
910 * configure: Regenerate.
911
912 1999-09-29 Doug Evans <devans@casey.cygnus.com>
913
914 * configure.in: Configure the testsuite directory for thumb.
915 * configure: Regenerate.
916
917 1999-07-16 Ben Elliston <bje@cygnus.com>
918
919 * configure.in: Configure the testsuite directory for arm.
920 * configure: Regenerate.
921
922 1999-04-08 Nick Clifton <nickc@cygnus.com>
923
924 * configure.in: Add support for MCore target.
925 * configure: Regenerate.
926
927 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
928
929 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
930 RUNTEST instead of commenting out, fixes portability problem.
931
932 1999-02-08 Nick Clifton <nickc@cygnus.com>
933
934 * configure.in: Add support for StrongARM target.
935 * configure: Regenerate.
936
937 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
938
939 * configure.in: Require autoconf 2.12.1 or higher.
940
941 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
942
943 * configure.in (i960-*-*): Add.
944 * configure: Rebuild.
945
946 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
947
948 * configure.in: Added case for fr30-*-*.
949 * configure: Regenerated.
950
951 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
952
953 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
954 to allow successful operation on Windows.
955
956 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
957
958 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
959 check can be invoked recursively.
960
961 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
962
963 * configure.in: Build simulator on sparclite and sparc86x targets.
964 * configure: Regenerate.
965
966 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
967
968 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
969 to autoconf and autoheader.
970
971 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
972
973 * Makefile.in (autoconf-common autoheader-common): Pass `-l
974 ../common' to autoconf and autoheader. Unconditionally run
975 autoconf in every subdir.
976 (autoconf-changelog autoheader-changelog): Unconditionally run
977 commands in every subdir.
978 (autoconf-install autoheader-install): Likewise.
979
980 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
981
982 * Makefile.in: Get SHELL from configure.
983 * (FLAGS_TO_PASS): Pass down SHELL.
984 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
985 NT native builds.
986
987 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
988
989 * configure.in (extra_subdirs): Enable igen for mn10300.
990 * configure: Re-generate.
991
992 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
993
994 * configure.in (extra_subdirs): Add support for thumb target.
995
996 * configure (extra_subdirs): Add support for thumb target.
997
998 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
999
1000 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1001 target.
1002 * configure: Regenerate.
1003
1004 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1005
1006 * configure.in (extra_subdirs): v850ea needs igen.
1007 * configure: Re-generate.
1008
1009 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1010
1011 * configure.in (testdir): When a testsuite directory, add that to
1012 the list of confdirs.
1013
1014 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1015
1016 * configure.in (extra_subdirs): Enable igen ready for V850.
1017
1018 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1019
1020 * configure.in (w65-*-*, only_if_enabled): Set.
1021 * configure: Re-generate.
1022
1023 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1024
1025 * configure.in (sparc*-*-*, only_if_enabled): Set
1026 only_if_enabled=yes. Check only_if_enabled before enabling a
1027 simulator.
1028 * configure: Regenerate.
1029
1030 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1031
1032 * configure.in (extra_subdirs): Add v850e target.
1033
1034 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1035
1036 * configure.in (extra_subdirs): Add v850ea target.
1037
1038 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1039
1040 * configure.in (sparc*-*-*): Don't build erc32.
1041 * configure: Regenerate.
1042
1043 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1044
1045 * configure.in (m32r-*-*): New target.
1046 * configure: Regenerate.
1047
1048 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1049
1050 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1051
1052 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1053 thought that .NOEXPORT was the default target.
1054
1055 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1056
1057 * Makefile.in (clean mostlyclean): Restore targets accidentally
1058 deleted in earlier change.
1059
1060 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1061
1062 * Makefile.in (autoheader-common, autoheader-changelog,
1063 autoheader-install): Perform autoheader in addition to autoconf.
1064
1065 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1066
1067 * Makefile.in (autoconf-install): New target.
1068 (autoconf-changelog): Try different way to obtain user name.
1069
1070 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1071
1072 * Makefile.in (autoconf-changelog): New target, update
1073 ChangeLog for all subdirectories - normally used after
1074 autoconf-common target.
1075
1076 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1077
1078 * configure.in (extra_subdirs): Include testsuite for d30v.
1079 * configure: Regenerate.
1080
1081 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1082 ../gdb/Makefile.in
1083 (check): New rules - drive the testsuite.
1084
1085 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1086
1087 * configure.in: Add mn10200 configure lines accidentally
1088 removed.
1089 * configure: Regenerated.
1090
1091 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1092
1093 * configure.in (extra_subdirs): Generalize common sub directory
1094 into a list.
1095 (extra_subdirs): For d30v add igen to the list to be built.
1096
1097 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1098
1099 * configure.in (d30v): New target.
1100 * configure: Regenerated.
1101
1102 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1103
1104 * configure.in: Don't require GCC to build the mn10200
1105 simulator anymore.
1106 * configure: Rebuilt.
1107
1108 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1109
1110 * configure.in: Don't configure any subdirs if no simulator
1111 is being built. Don't use erc32 for sparc64.
1112 * configure: Regenerated.
1113
1114 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1115
1116 * Makefile.in (autoconf-common): New target.
1117 * configure.in: Do configure common.
1118 * configure: Regenerated.
1119
1120 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1121
1122 * configure configure.in: Don't configure common anymore. Files
1123 from common are now built in the individual simualtor directories.
1124 This fixes problems with the WinGDB build procedure.
1125
1126 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1127
1128 * configure: Enable the mn10200 simulator.
1129
1130 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1131
1132 * configure.in (configdirs): Add common.
1133 * configure: Regenerated.
1134
1135 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1136
1137 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1138 system V based targets.
1139 * configure: Regenerate.
1140
1141 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1142
1143 * configure.in (--enable-sim-powerpc): Delete.
1144 (--enable-sim): Add.
1145 * configure: Regenerated.
1146
1147 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1148
1149 * configure.in: Only build the V850 simulator if
1150 we are using gcc.
1151 * configure: Rebuild.
1152
1153 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1154
1155 * configure.in: Do build erc32 for DOS and Windows hosts.
1156 * configure: Rebuild.
1157
1158 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1159
1160 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1161 be inherited from the parent. Remove INSTALL_XFORM and
1162 INSTALL_XFORM1. Make INSTALL be set from configure.
1163
1164 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1165
1166 * configure.in: Only build the MIPS simulator if we are using
1167 gcc.
1168 * configure: Rebuild.
1169
1170 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1171
1172 * configure.in (v850-*-*): Added V850 simulator.
1173
1174 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1175
1176 * configure.in (d10v-*-*): Added D10V simulator.
1177
1178 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1179
1180 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1181 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1182 (docdir): Removed.
1183 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1184 (AC_PROG_INSTALL): Added.
1185 * configure: Rebuilt.
1186
1187 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1188
1189 * configure.in: Only configure erc32 if using gcc.
1190 * configure: Rebuild.
1191
1192 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1193
1194 * configure.in (sim_target): Build PowerPC simulator for powerpc
1195 System V.4, Solaris, and Elf targets.
1196 * configure: Regenerate with autoconf 2.10.
1197
1198 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1199
1200 * configure.in: Only built erc32 simulator on Unix hosts as it
1201 uses pseudo ttys.
1202 * configure: Regenerated with autoconf 2.8.
1203
1204 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1205
1206 * erc32: Sparc simulator from the ESA.
1207
1208 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1209
1210 From: Miles Bader <miles@gnu.ai.mit.edu>
1211 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1212 * configure: Regenerate using autoconf.
1213
1214 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1215
1216 * Makefile.in (install): Fix typo.
1217
1218 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1219
1220 * configure: Regenerate with autoconf 2.7.
1221
1222 * Makefile.in (all): Simplify.
1223 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1224 as in the all target.
1225 (distclean, maintainer-clean, realclean): Likewise.
1226 (install): Likewise.
1227
1228 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1229
1230 * Makefile.in (all): Remove extra '\' char from shell script.
1231
1232 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1233
1234 * Makefile.in (all): Avoid a for loop with zero elements, even if
1235 the loop will not be executed because of an if statement.
1236
1237 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1238
1239 * Makefile.in (install): Add missing semicolon in "fi \".
1240
1241 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1242
1243 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1244 defaults from configure.
1245
1246 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1247 configure defaults.
1248 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1249 if either --enable-sim-powerpc is used, or the host compiler is
1250 GCC.
1251
1252 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1253
1254 * configure.in (mips*-*-*): Added "mips" simulator target.
1255 * configure: Re-generated.
1256
1257 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1258
1259 * Makefile.in (BISON): Remove macro.
1260 (FLAGS_TO_PASS): Remove BISON.
1261
1262 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1263
1264 * configure.in: Explicitly `exit 0' for broken shells.
1265 * configure: Rebuilt.
1266
1267 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1268
1269 * common/run.c (main): Initialize the callbacks.
1270
1271 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1272
1273 * Makefile.in (maintainer-clean): New synonym for realclean.
1274
1275 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1276
1277 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1278 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1279
1280 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1281
1282 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1283 <cagney@highland.com.au>.
1284 * configure: Regnerate from configure.in.
1285
1286 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1287
1288 * Update all FSF addresses except those in COPYING* files.
1289
1290 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1291
1292 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1293 submakes either default or passed in value.
1294
1295 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1296
1297 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1298 install): Changed targets so that they descend all
1299 subdirectories in $(SUBDIRS).
1300 (*-all, *-clean, *-install): Removed targets.
1301
1302 * configure.in: Don't bother with target makefile fragments, they
1303 are no longer needed.
1304 * configure: regenerated.
1305
1306 * Makefile.in, configure.in: converted to autoconf.
1307 * configure: New file, generated with autconf 2.4.
1308
1309 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1310
1311 * Makefile.in: Support ARM.
1312 * configure.in: Ditto.
1313
1314 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1315
1316 * Makefile.in: Support W65.
1317 * configure.in: Ditto.
1318
1319 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1320
1321 * Makefile.in: Add TAGS target.
1322
1323 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1324
1325 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1326 install-h8300, clean-h8300, all-h8500, install-h8500,
1327 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1328 recursion lines.
1329
1330 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1331
1332 * Makefile.in: remove endian.h trace from h8500
1333
1334 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1335
1336 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1337
1338 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1339
1340 * Makefile.in: make all of the all-* target (except all-nothing)
1341 depend on endian.h, so that if we're not building a simulator, we
1342 don't built endian
1343
1344 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1345
1346 * Makefile.in (check, installcheck): Added dummy targets.
1347
1348 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1349
1350 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1351 explicitly make it, since some makes apparently don't work with
1352 VPATH and .c to executable rules (SunOS make for example).
1353
1354 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1355
1356 * Makefile.in (endian): Add explicit rule for broken makes.
1357
1358 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1359
1360 * Makefile.in (info, install-info): New targets.
1361 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1362 level Makefile.
1363
1364 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1365
1366 * Makefile.in (endian.h): build endian.h via a temporary file so
1367 that we don't leave an incomplete file lying around on
1368 interrupted builds.
1369 (clean): remove endian, e.h, and endian.h.
1370
1371 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1372
1373 * Makefile.in, configure.in: if target isn't supported, build a
1374 harmless makefile.
1375
1376