1 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
3 * arm/configure: Regenerated.
4 * avr/configure: Likewise.
5 * bfin/configure: Likewise.
6 * common/configure: Likewise.
7 * cr16/configure: Likewise.
8 * cris/configure: Likewise.
9 * d10v/configure: Likewise.
10 * erc32/configure: Likewise.
11 * frv/configure: Likewise.
12 * ft32/configure: Likewise.
13 * h8300/configure: Likewise.
14 * igen/configure: Likewise.
15 * iq2000/configure: Likewise.
16 * lm32/configure: Likewise.
17 * m32c/configure: Likewise.
18 * m32r/configure: Likewise.
19 * m68hc11/configure: Likewise.
20 * mcore/configure: Likewise.
21 * microblaze/configure: Likewise.
22 * mips/configure: Likewise.
23 * mn10300/configure: Likewise.
24 * moxie/configure: Likewise.
25 * msp430/configure: Likewise.
26 * ppc/configure: Likewise.
27 * rl78/configure: Likewise.
28 * rx/configure: Likewise.
29 * sh/configure: Likewise.
30 * sh64/configure: Likewise.
31 * v850/configure: Likewise.
33 2015-03-29 Mike Frysinger <vapier@gentoo.org>
35 * configure: Regenerate.
36 * configure.ac: Delete sim_testsuite check and config in testsuite.
37 * configure.tgt (sim_testsuite): Delete everywhere.
39 2015-03-28 Mike Frysinger <vapier@gentoo.org>
41 * configure: Regenerate.
42 * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
44 2015-03-28 James Bowman <james.bowman@ftdichip.com>
46 * configure.tgt: Add FT32 entry.
47 * configure: Regenerate.
49 2015-03-16 Mike Frysinger <vapier@gentoo.org>
51 * .gitignore: Delete tconfig.h.
52 * README-HACKING: Change tconfig.in to tconfig.h.
54 2014-03-12 Nick Clifton <nickc@redhat.com>
56 * MAINTAINERS: Add myself as the maintainer for the MSP430.
58 2014-03-10 Mike Frysinger <vapier@gentoo.org>
60 * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
61 * configure: Regenerate.
63 2014-01-06 Tom Tromey <tromey@redhat.com>
65 * common/cgen-trace.c: Don't use old VA_* macros.
66 * common/sim-load.c (xprintf): Likewise.
67 * common/sim-trace.c (trace_printf, debug_printf): Likewise.
69 2014-01-06 Tom Tromey <tromey@redhat.com>
71 * README-HACKING: Don't use PARAMS.
72 * arm/wrapper.c: Don't use PARAMS.
73 * bfin/sim-main.h: Don't use PARAMS.
74 * common/callback.c: Don't use PARAMS.
75 * common/cgen-trace.c: Don't use PARAMS.
76 * common/run-sim.h: Don't use PARAMS.
77 * common/run.c: Don't use PARAMS.
78 * common/sim-base.h: Don't use PARAMS.
79 * common/sim-load.c: Don't use PARAMS.
80 * common/sim-options.h: Don't use PARAMS.
81 * common/sim-trace.c: Don't use PARAMS.
82 * common/sim-trace.h: Don't use PARAMS.
83 * common/sim-utils.h: Don't use PARAMS.
84 * cr16/cr16_sim.h: Don't use PARAMS.
85 * cr16/gencode.c: Don't use PARAMS.
86 * cr16/interp.c: Don't use PARAMS.
87 * cr16/simops.c: Don't use PARAMS.
88 * d10v/d10v_sim.h: Don't use PARAMS.
89 * d10v/gencode.c: Don't use PARAMS.
90 * d10v/interp.c: Don't use PARAMS.
91 * d10v/simops.c: Don't use PARAMS.
92 * erc32/erc32.c: Don't use PARAMS.
93 * erc32/exec.c: Don't use PARAMS.
94 * erc32/float.c: Don't use PARAMS.
95 * erc32/func.c: Don't use PARAMS.
96 * erc32/sis.c: Don't use PARAMS.
97 * erc32/sis.h: Don't use PARAMS.
98 * mips/interp.c: Don't use PARAMS.
99 * mips/sim-main.h: Don't use PARAMS.
100 * sh/interp.c: Don't use PARAMS.
101 * v850/sim-main.h: Don't use PARAMS.
102 * v850/v850_sim.h: Don't use PARAMS.
104 2013-11-07 Will Newton <will.newton@linaro.org>
107 * arm/wrapper.c (sim_create_inferior): Call init before
110 2013-11-07 Will Newton <will.newton@linaro.org>
113 * arm/wrapper.c (sim_create_inferior): Avoid calling
114 bfd_get_mach with a NULL bfd.
116 2013-06-21 Nick Clifton <nickc@redhat.com>
118 * msp430: New Directory.
119 * configure.tgt: Add it.
120 * configure: Regenerate.
122 2013-03-15 Steve Ellcey <sellcey@mips.com>
124 * arm/wrapper.c (sim_complete_command): Make char arguments const.
125 * avr/interp.c (sim_complete_command): Ditto.
126 * common/sim-options.c (sim_complete_command): Ditto.
127 * cr16/interp.c (sim_complete_command): Ditto.
128 * erc32/interf.c (sim_complete_command): Ditto.
129 * m32c/gdb-if.c (sim_complete_command): Ditto.
130 * microblaze/interp.c (sim_complete_command): Ditto.
131 * ppc/sim_calls.c (sim_complete_command): Ditto.
132 * rl78/gdb-if.c (sim_complete_command): Ditto.
133 * rx/gdb-if.c (sim_complete_command): Ditto.
134 * sh/interp.c (sim_complete_command): Ditto.
136 2013-01-01 Joel Brobecker <brobecker@adacore.com>
138 Update year range in copyright notice of all files.
140 2012-12-19 Joel Brobecker <brobecker@adacore.com>
142 Update old contact info in GPL license notices.
144 2012-12-19 Joel Brobecker <brobecker@adacore.com>
146 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
148 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
150 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
152 * common/acinclude.m4: Define lt_cv_dlopen_libs.
153 * arm/configure: Regenerate.
154 * avr/configure: Regenerate.
155 * bfin/configure: Regenerate.
156 * common/configure: Regenerate.
157 * cr16/configure: Regenerate.
158 * cris/configure: Regenerate.
159 * d10v/configure: Regenerate.
160 * erc32/configure: Regenerate.
161 * frv/configure: Regenerate.
162 * h8300/configure: Regenerate.
163 * igen/configure: Regenerate.
164 * iq2000/configure: Regenerate.
165 * lm32/configure: Regenerate.
166 * m32c/configure: Regenerate.
167 * m32r/configure: Regenerate.
168 * m68hc11/configure: Regenerate.
169 * mcore/configure: Regenerate.
170 * microblaze/configure: Regenerate.
171 * mips/configure: Regenerate.
172 * mn10300/configure: Regenerate.
173 * moxie/configure: Regenerate.
174 * ppc/configure: Regenerate.
175 * rl78/configure: Regenerate.
176 * rx/configure: Regenerate.
177 * sh/configure: Regenerate.
178 * sh64/configure: Regenerate.
179 * testsuite/configure: Regenerate.
180 * v850/configure: Regenerate.
182 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
184 * MAINTAINERS: Update my email address.
186 2012-09-24 Steve Ellcey <sellcey@mips.com>
188 * mips/basic.exp: Add mips*-mti-elf* target.
189 * configure.ac: Add mips*-mti-elf* target.
190 * configure: Regenerate.
192 2012-06-15 Joel Brobecker <brobecker@adacore.com>
194 * configure: Regenerate.
196 2012-06-06 Michael Eager <eager@eagercon.com>
198 * microblaze/interp.c (config.h): Add #include.
200 2011-11-29 Joel Brobecker <brobecker@adacore.com>
202 * MAINTAINERS (Global Maintainers): New section. Add Mike
205 2011-11-28 DJ Delorie <dj@redhat.com>
207 * configure.tgt: Add rl78 support.
208 * configure: Regenerate.
209 * rl78: New directory.
210 * MAINTAINERS: Add myself as RL78 maintainer.
212 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
214 * MAINTAINERS: Remove Thiemo Seufer.
216 2011-06-04 Mike Frysinger <vapier@gentoo.org>
218 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
219 * configure: Regenerate.
221 2011-05-04 Joseph Myers <joseph@codesourcery.com>
223 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
225 * configure: Regenerate.
227 2011-03-05 Mike Frysinger <vapier@gentoo.org>
229 * MAINTAINERS: Add bfin entry.
230 * configure.tgt (bfin-*-*): Handle bfin targets.
231 * configure: Regenerate.
233 2011-01-05 Mike Frysinger <vapier@gentoo.org>
235 * .gitignore: Add /*/hw-config.h.
237 2010-12-23 Mike Frysinger <vapier@gentoo.org>
239 * .gitignore: New file.
241 2010-07-28 DJ Delorie <dj@redhat.com>
243 * MAINTAINERS: Add self as RX maintainer. Sort list.
245 2010-06-08 Nick Clifton <nickc@redhat.com>
247 * reg.c (set_oszc): Use unsigned int for the mask.
248 (set_szc, set_osz, set_sz): Likewise.
250 2010-04-26 Mike Frysinger <vapier@gentoo.org>
252 * configure.ac: Target logic moved out to and included from ...
253 * configure.tgt: ... this new file.
254 * configure: Regenerated.
256 2010-04-12 Mike Frysinger <vapier@gentoo.org>
258 * README-HACKING: Add more sections.
260 2010-02-11 Doug Evans <dje@sebabeach.org>
262 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
263 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
264 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
265 * cris/semcrisv32f-switch.c: Regenerate.
267 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
269 * avr/configure: Regenerate.
270 * cris/configure: Regenerate.
271 * microblaze/configure: Regenerate.
273 2010-01-02 Doug Evans <dje@sebabeach.org>
275 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
276 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
277 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
278 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
279 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
280 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
282 2010-01-01 Doug Evans <dje@sebabeach.org>
284 * cris/mloop.in: Fix copyright year update snafu.
286 2009-11-24 Joel Brobecker <brobecker@adacore.com>
288 * common/aclocal.m4: Add include of ../../config/zlib.m4.
289 * common/common.m4: Use AM_ZLIB to check for zlib support.
290 * ppc/configure.ac: Likewise.
291 * arm/configure, avr/configure, common/configure, cr16/configure,
292 cris/configure, d10v/configure, erc32/configure, frv/configure,
293 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
294 m32r/configure, m68hc11/configure, mcore/configure,
295 microblaze/configure, mips/configure, mn10300/configure,
296 moxie/configure, ppc/configure, sh/configure, sh64/configure,
297 v850/configure: Regenerate.
299 2009-11-24 DJ Delorie <dj@redhat.com>
302 * configure.ac: Add entry for Renesas RX.
303 * configure: Regenerate.
305 2009-11-22 Doug Evans <dje@sebabeach.org>
307 * cris/cpuall.h: Regenerate.
308 * cris/cpuv10.h: Regenerate.
309 * cris/cpuv32.h: Regenerate.
310 * cris/decodev10.c: Regenerate.
311 * cris/decodev10.h: Regenerate.
312 * cris/decodev32.c: Regenerate.
313 * cris/decodev32.h: Regenerate.
315 2009-11-12 Tristan Gingold <gingold@adacore.com>
317 * avr/interp.c (sim_write): Allow byte access.
320 2009-11-12 Tristan Gingold <gingold@adacore.com>
322 * avr/interp.c (sim_load): Clear memory before loading.
324 2009-11-09 Tristan Gingold <gingold@adacore.com>
326 * avr/interp.c (sim_resume): Fix typo for OP_ret.
328 2009-10-23 Doug Evans <dje@sebabeach.org>
330 * cris/arch.c: Regenerate.
331 * cris/arch.h: Regenerate.
332 * cris/cpuall.h: Regenerate.
333 * cris/cpuv10.c: Regenerate.
334 * cris/cpuv10.h: Regenerate.
335 * cris/cpuv32.c: Regenerate.
336 * cris/cpuv32.h: Regenerate.
337 * cris/cris-desc.c: Regenerate.
338 * cris/cris-desc.h: Regenerate.
339 * cris/cris-opc.h: Regenerate.
340 * cris/decodev10.c: Regenerate.
341 * cris/decodev10.h: Regenerate.
342 * cris/decodev32.c: Regenerate.
343 * cris/decodev32.h: Regenerate.
344 * cris/modelv10.c: Regenerate.
345 * cris/modelv32.c: Regenerate.
346 * cris/semcrisv10f-switch.c: Regenerate.
347 * cris/semcrisv32f-switch.c: Regenerate.
349 2009-10-22 Tristan Gingold <gingold@adacore.com>
351 * avr/interp.c (sim_stop): Return 1.
353 2009-10-16 Doug Evans <dje@sebabeach.org>
355 * MAINTAINERS: Add myself as m32r maintainer.
357 2009-10-15 Michael Egaer <eager@eagercon.com>
359 * MAINTAINERS: Add self as MicroBlaze maintainer.
361 2009-10-14 Ben Elliston <bje@gnu.org>
363 * MAINTAINERS (common): Move myself to "past maintainers" section.
365 2009-10-06 Michael Eager <eager@eagercon.com>
367 * microblaze/interp.c: Add include microblaze-dis.h.
369 2009-09-23 Michael Eager <eager@eagercon.com>
371 * configure: Add microblaze-*.* (not regenerated).
372 * configure.ac: Likewise.
373 * microblaze/config.in: New.
374 * microblaze/configure: Generate.
375 * microblaze/configure.ac: New.
376 * microblaze/interp.c: New.
377 * microblaze/Makefile.in: New.
378 * microblaze/microblaze.h: New.
379 * microblaze/microblaze.isa: New.
380 * microblaze/sim-main.h: New.
381 * microblaze/sysdep.h: New.
383 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
385 * avr/config.in: Regenerate.
386 * avr/configure: Likewise.
387 * configure: Likewise.
388 * cris/config.in: Likewise.
389 * cris/configure: Likewise.
391 * configure.ac: m4_include toplevel config/override.m4.
392 * configure: Regenerate.
393 * avr/configure: Regenerate.
394 * cris/configure: Regenerate.
396 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
398 * Makefile.in (datarootdir): New variable.
400 2009-05-18 Jon Beniston <jon@beniston.com>
402 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
403 * configure.ac: Add lm32 target.
404 * lm32: New directory.
406 2009-05-11 Andrew Cagney <cagney@gnu.org>
408 * MAINTAINERS: Orphan ppc.
410 2009-05-08 Kevin Buettner <kevinb@redhat.com>
412 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
413 m32c_signal_to_target. Change signal return values from SIGILL,
414 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
415 TARGET_SIGNAL_SEGV, etc. Fix all callers.
417 2009-04-30 Anthony Green <green@moxielogic.com>
419 * MAINTAINERS: Add myself for the moxie port.
420 * moxie: New directory.
421 * configure.ac: Add entry for moxie.
422 * configure: Regenerate.
424 2009-04-27 Tristan Gingold <gingold@adacore.com>
426 * avr: New directory.
427 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
428 * avr/config.in: New file, generated by autoheader.
429 * avr/configure: New file generated by autoconf.
430 * configure.ac: Add avr.
431 * configure: Regenerated.
433 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
435 * Makefile.in: Add dummy install-pdf, html, and
436 install-html targets.
438 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
440 * cris/sim-if.c: Include errno.h.
441 (cris_start_address, cris_program_offset): New variables.
442 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
444 (cris_options): New options --cris-program-offset and
445 --cris-start-address.
446 (cris_option_handler): Handle new options.
447 (cris_program_offset_write, cris_set_section_offset_iterator)
448 (cris_offset_sections, cris_offset_sections): New functions.
449 (sim_load): Use cris_program_offset_write as function argument to
450 cris_load_elf_file, not sim_write.
451 (struct offsetinfo): New struct.
452 (cris_handle_interpreter): Fix typo in comment.
453 (sim_open): Call cris_offset_sections as soon as the bfd of the
454 infile is available. Gate bfd validity checks on abfd non-NULL.
455 (sim_create_inferior): Let cris_start_address when != -1 override
456 other start-address choices.
458 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
460 * cris/traps.c (abort): Define to call sim_io_error.
461 (create_map): Make -1 imply a non-fixed address, not 0. All
462 callers changed. Only prefer the next higher unmapped address if
463 the last mapped address is no less than 0x40000000. Check that
464 the address to be mapped is not already mapped. Update head
466 (unmap_pages): Don't call abort when recursive call fails, just
467 note and return an error if a page in the range couldn't be unmapped.
468 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
469 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
470 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
471 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
472 don't abort on page not being mapped. Handle non-anon filemap
473 with length padded to pagesize.
475 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
477 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
478 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
479 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
480 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
481 (TARGET_AT_CLKTCK): Remove redundant macros.
482 (AUX_ENT): Adjust to use standard ELF AT_* macros.
483 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
485 (sim_open): Also pass AT_SECURE.
487 * cris/sim-main.h (struct _sim_cpu): New member
488 set_target_thread_data.
489 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
490 * cris/crisv10f.c: Ditto.
491 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
492 (MY (f_specific_init)): Set new _sim_cpu member to new function.
493 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
494 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
497 * cris/traps.c (TARGET_SYS_exit_group): Define.
498 (cris_break_13_handler): Handle it like the exit for the last
501 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
502 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
503 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
504 2.6.27. Set machine field to the BFD printable name of the
507 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
508 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
509 TARGET_MAP_DENYWRITE.
511 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
512 (TARGET_X_OK, TARGET_F_OK): Define.
513 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
515 * cris/semcrisv32f-switch.c: Regenerate.
517 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
519 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
520 just a short CRIS-specific notice. Tweak the wording for a
521 failing architecture test.
523 * cris/traps.c (TARGET_SYS_writev): New macro.
524 (is_mapped_only, cris_dump_map): New functions.
525 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
526 and prot combinations and a non-zero page-offset. If
527 TARGET_MAP_FIXED, unmap pages before mapping them.
528 <case TARGET_SYS_mprotect>: When checking, allow any length
529 argument. Don't actually do anything.
530 <case TARGET_SYS_writev>: New case.
532 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
533 * cris/sim-if.c: Include elf-bfd.h.
534 (struct progbounds): New members end_loadmem, start_nonloadmem.
535 (xprintf, eprintf): New functions, copied from common/sim-load.c.
536 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
537 (get_progbounds_iterator): Renamed from get_progbounds. Make
538 static. Update head comment. Set new struct progbounds members.
539 (exec_load_addr, interp_load_addr, interp_start_addr): New static
541 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
542 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
544 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
545 handling to use auxv_entries. Improve error message and checking
546 for invalid programs. Use new variable abfd for the program
547 instead of for each access reaching into sd to get it.
548 (sim_create_inferior): If non-zero, use interp_start_addr instead
549 of the program start address.
550 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
551 stale comment. Always specify little-endian.
553 2008-07-29 Nick Clifton <nickc@redhat.com>
555 * common/genmloop.sh: Add new parameter: -shell to specify the
556 command interpreter to use to run the input file. This is
557 necessary because otherwise SHELL is taken from the user's
558 environment, and not from the makefile that invoked this script
559 and the user might not be running an sh-like shell.
560 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
561 * fr30/Makefile.in: Likewise.
562 * frv/Makefile.in: Likewise.
563 * i960/Makefile.in: Likewise.
564 * iq2000/Makefile.in: Likewise.
565 * m32r/Makefile.in: Likewise.
567 * frv/mloop.in: Add missing start of line comment marker.
569 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
571 * cris/configure: Regenerate to track ../common/common.m4 changes.
572 * cris/config.in: Ditto.
574 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
575 Daniel Jacobowitz <dan@codesourcery.com>
576 Joseph Myers <joseph@codesourcery.com>
578 * cris/configure: Regenerate.
580 2008-05-09 Olivier Hainque <hainque@adacore.com>
582 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
584 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
586 * MAINTAINERS: Add myself as maintainer of cr16 port.
588 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
590 Add simulator for National cr16 processor.
591 * cr16: New directory.
592 * configure.ac: Add entry for National cr16.
593 * configure: Regenerate.
595 2008-02-05 DJ Delorie <dj@redhat.com>
597 * configure.ac (v850): V850 now has a testsuite.
598 * configure (v850): Likewise.
600 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
602 Updated copyright notices for most files.
604 2007-12-19 DJ Delorie <dj@redhat.com>
606 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
609 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
611 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
612 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
613 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
614 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
615 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
616 cris/semcrisv32f-switch.c: Regenerate.
618 2007-08-24 Joel Brobecker <brobecker@adacore.com>
620 Switch the license of all files explicitly copyright the FSF
623 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
625 * Makefile.in: Add dummy "pdf" target.
627 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
629 * cris/traps.c (dump_statistics): Change format for cycle numbers
630 to %llu and cast parameters to unsigned long long.
632 2007-02-16 Thiemo Seufer <ths@mips.com>
634 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
636 2007-01-28 Manuel Lauss <slauss@resi.at>
638 * configure.ac (sh64-*-*): Change to sh64*-*-*.
639 (sh-*-*): Change to sh*-*-*.
640 * configure: Regenerated.
642 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
644 Updated copyright notices for most files.
646 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
648 * Makefile.in (autoconf-common autoheader-common): Only run
649 autoheader on subdirs with a file config.in.
651 * configure.ac (common): Make the default "yes" for all targets
653 * configure: Regenerate.
655 * Makefile.in (autoconf-common autoheader-common): In documented
656 usage, say SHELL=/bin/sh.
657 (.PHONY): Add autoheader-common.
659 * MAINTAINERS: Add self as authorized committer for *.
661 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
662 Hans-Peter Nilsson <hp@axis.com>
664 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
665 (cris_unknown_syscall_action): Declare.
666 * cris/sim-if.c (cris_unknown_syscall_action): Define.
667 (cris_options): Add cris-unknown-syscall option.
668 (cris_option_handler): Correct comment about and error message for
669 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
670 * cris/traps.c: Include stdarg.h
671 (cris_unknown_syscall): New function.
672 (cris_break_13_handler): Instead of sim_io_eprintf and
673 sim_engine_halt, call cris_unknown_syscall to handle more or less
674 unknown syscalls. Adjust code as necessary to handle return
677 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
679 * MAINTAINERS: Add Dave Brolley for sh64.
681 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
683 * cris/traps.c (TARGET_PIPE_BUF): New macro.
684 (cris_pipe_empty): Correct initialization of "remaining". Only
685 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
688 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
690 * cris/configure.ac: Check for limits.h and sys/param.h.
691 * cris/configure, cris/config.in: Rebuild.
692 * cris/traps.c (SIM_PATHMAX): New macro.
693 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
695 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
697 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
698 * Makefile.in (FLAGS_TO_PASS): Include libdir.
699 * configure: Regenerated.
701 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
703 * cris/configure: Regenerated.
705 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
707 * cris/configure: Regenerated.
709 2006-05-05 Andreas Schwab <schwab@suse.de>
711 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
712 * configure: Regenerate.
714 * Makefile.in (CFLAGS_FOR_BUILD): Define.
715 (CC_FOR_BUILD): Don't override.
716 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
718 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
720 * MAINTAINERS: Add an "Authorized committers" section, and list
723 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
725 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
727 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
729 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
730 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
731 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
732 (all): Depend on rvdummy$(EXEEXT).
733 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
734 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
736 * cris/configure: Regenerate.
737 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
738 (enum cris_interrupt_type, crisv10deliver_interrupt)
739 (crisv32deliver_interrupt: New declarations.
740 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
741 sim_events_tickn and set state-events member work_pending when it's
742 time for the next event.
743 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
744 interrupt-delivery function.
745 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
746 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
747 * cris/devices.c: Include hw-device.h.
748 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
749 (device_io_write_buffer): Only perform 0x900000xx-functions if
750 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
751 call hw_io_write_buffer. Add return 0 last in function.
752 * cris/sim-if.c (cris_have_900000xxif): Now global.
753 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
754 Force "-model" option, effectively.
755 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
756 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
758 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
760 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
761 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
762 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
764 2006-03-13 DJ Delorie <dj@redhat.com>
766 * MAINTAINERS: Add self as m32c sim maintainer.
768 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
770 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
772 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
774 2006-01-23 Jim Blandy <jimb@redhat.com>
776 Add simulator for Renesas M32C and M16C.
778 * m32c: New directory.
779 * configure.ac: Add entry for Renesas M32C.
780 * configure: Regenerate.
782 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
784 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
785 cycle count for the current insn.
787 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
789 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
790 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
791 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
792 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
794 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
796 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
797 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
798 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
799 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
800 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
801 cris/semcrisv32f-switch.c: Regenerate.
803 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
805 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
806 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
808 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
809 F_GETFL on fd 0, 1 and 2.
811 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
813 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
814 last_open_fd, last_open_flags.
815 * cris/traps.c: Don't include targ-vals.h.
816 (TARGET_O_ACCMODE): Define.
817 (cris_break_13_handler): Set new _sim_cpu members.
818 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
819 Rearrange code as switch. Emit "unimplemented" abort for
820 unimplemented fcntl calls.
822 * cris/traps.c (TARGET_SYS_stat): Define.
823 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
824 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
826 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
828 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
829 low 32 bits are used after an unsigned long cast.
831 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
833 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
835 2005-05-26 Chris Demetriou <cgd@netbsd.org>
837 * MAINTAINERS: Update my mail address, move myself to the
838 "Past maintainers" section.
840 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
842 * configure.ac: Add igen to v850 build.
843 * configure: Regenerate.
845 2005-04-29 Paul Brook <paul@codesourcery.com>
847 * common/callback.c (PIPE_BUF): Provide default definition.
848 (os_lstat): Use stat if lstat is not available on the host.
849 (os_ftruncate): Return EINVAL if not available on the host.
850 (os_truncate): Ditto.
851 * common/configure.ac: Check for lstat, truncate and ftruncate.
852 * common/configure: Regenerate.
853 * common/config.in: Regenerate.
855 2005-04-27 Paul Brook <paul@codesourcery.com>
857 * common/Make-common.in: Add $(EXEEXT) to "run".
859 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
861 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
862 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
863 implemented. In call to create_map, pad length argument to 8k.
865 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
867 * configure.ac: Add explicit sh64 case.
868 * configure: Regenerate.
870 2005-03-30 Paul Brook <paul@codesourcery.com>
872 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
874 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
876 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
877 include cgen-ops.h in decodev10.c and decodev32.c.
878 * cris/sim-main.h: Don't include cgen-ops.h here.
879 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
880 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
881 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
882 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
883 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
884 cris/semcrisv32f-switch.c: Regenerate.
886 * cris/traps.c (cris_break_13_handler) <case
887 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
888 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
890 2005-03-23 Mark Kettenis <kettenis@gnu.org>
892 * cris/configure: Regenerate.
894 2005-02-28 Jim Blandy <jimb@redhat.com>
896 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
897 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
898 Regenerated, after change to common/aclocal.m4.
900 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
902 * iq2000: New target subdirectory.
903 * configure.ac: Add iq2000 target.
904 * configure: Regenerate.
906 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
908 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
909 (realclean, install): Fail if subdir make failed.
911 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
913 * cris: New directory, simulator for Axis Communications CRIS
914 including CRIS v32, CGEN-based.
915 * configure.ac: Add corresponding configury.
916 * configure: Regenerate.
918 2005-01-17 Andrew Cagney <cagney@gnu.org>
920 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
921 common directory. Remove sparc*-*-* from list.
923 2005-01-11 Andrew Cagney <cagney@gnu.org>
925 * Makefile.in (autoconf-common autoheader-common): Add --force to
926 autoconf and autoheader.
927 (autoconf-common autoheader-common)
928 (autoconf-install autoheader-install): Check for configure.ac, not
930 * configure.ac: Delete AC_CONFIG_AUX_DIR.
931 * configure: Re-generate.
933 2005-01-07 Andrew Cagney <cagney@gnu.org>
935 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
936 correctly calls AC_CONFIG_SUBDIRS.
937 * configure: Re-generate.
939 2004-12-01 Andrew Cagney <cagney@gnu.org>
941 * i960, h8500: Delete directory.
943 2004-11-12 Andrew Cagney <cagney@gnu.org>
945 * d30v, fr30, mn10200, z8k: Delete directory.
947 2004-03-10 Ben Elliston <bje@gnu.org>
949 * MAINTAINERS: Update my mail address.
951 2004-01-26 Chris Demetriou <cgd@broadcom.com>
953 * configure.in (mips*-*-*): Configure in testsuite.
954 * configure: Regenerate.
956 2003-10-08 Dave Brolley <brolley@redhat.com>
958 * configure.in: Move frv handling to alphabetically correct placement.
960 2003-09-03 Andreas Schwab <schwab@suse.de>
962 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
964 2003-08-29 Dave Brolley <brolley@redhat.com>
966 * MAINTAINERS: Add myself as maintainer of the FRV port.
968 2003-08-20 Michael Snyder <msnyder@redhat.com>
969 Dave Brolley <brolley@redhat.com>
971 * frv/: New directory, simulator for the Fujitsu FRV.
972 * configure.in: Add frv configury.
973 * configure: Regenerate.
975 2003-08-10 Ben Elliston <bje@wasabisystems.com>
977 * MAINTAINERS: Update my mail address.
979 2003-08-09 Andrew Cagney <cagney@redhat.com>
981 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
982 maintenance. List igen and sh maintainers. Mention that target
983 and global maintainers pick up the slack.
985 2003-07-09 Michael Snyder <msnyder@redhat.com>
987 * configure.in: Add testsuite to extra_subdirs for sh.
988 * configure: Regenerate.
990 2003-01-23 Nick Clifton <nickc@redhat.com>
994 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
996 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
998 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
1000 * MAINTAINERS: Update my email address.
1002 2002-07-17 Andrew Cagney <ac131313@redhat.com>
1004 * w65/: Delete directory.
1006 2002-07-16 Andrew Cagney <ac131313@redhat.com>
1008 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1009 * configure: Re-generate.
1011 2002-07-13 Andrew Cagney <ac131313@redhat.com>
1013 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1014 * configure: Re-generate.
1016 2002-06-16 Andrew Cagney <ac131313@redhat.com>
1018 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1019 id, date and host to be overriden by NAME, ID, DATE and HOST
1020 respectfully. Use ISO dates.
1022 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
1024 * Makefile.in (ChangeLog): New makefile variable.
1025 * README-HACKING: Mention the ChangeLog makefile variable.
1027 2002-06-01 Andrew Cagney <ac131313@redhat.com>
1029 * tic80/: Delete directory.
1031 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
1033 * MAINTAINERS: Update my email address.
1035 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
1037 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1039 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
1041 * MAINTAINERS: Record self as a co-maintainer of just common/.
1043 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
1045 * MAINTAINERS: Point to GDB files describing overall maintaince
1046 and check-in procedures.
1048 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
1050 * MAINTAINERS: Add myself for ARM portions.
1052 2001-10-19 Andrew Cagney <ac131313@redhat.com>
1054 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1055 * configure: Re-generate.
1057 2001-02-16 Ben Elliston <bje@redhat.com>
1059 * MAINTAINERS: Add myself for common portions.
1061 2001-01-15 Chris Demetriou <cgd@broadcom.com>
1063 * MAINTAINERS: Added self and Andrew for the mips sim.
1065 2000-10-25 Geoff Keating <geoffk@cygnus.com>
1067 * MAINTAINERS: Added self and Andrew for the ppc sim.
1069 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
1071 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1072 * m68hc11: New directory.
1073 * configure.in: Add.
1074 * configure: Regenerate.
1076 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1078 * tic80: New directory.
1079 * configure.in: Add configury.
1080 * configure: Regenerate.
1082 2000-04-20 Nick Clifton <nickc@cygnus.com>
1084 * configure.in (extra_subdirs): Add testsuite to strongarm
1086 * configure: Regenerate.
1088 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1090 * MAINTAINERS: New file. Blank.
1092 1999-11-18 Ben Elliston <bje@cygnus.com>
1094 * configure.in: Require autoconf 2.13 and remove obsolete
1095 invocation of AC_C_CROSS.
1096 * configure: Regenerate.
1098 1999-09-29 Doug Evans <devans@casey.cygnus.com>
1100 * configure.in: Configure the testsuite directory for thumb.
1101 * configure: Regenerate.
1103 1999-07-16 Ben Elliston <bje@cygnus.com>
1105 * configure.in: Configure the testsuite directory for arm.
1106 * configure: Regenerate.
1108 1999-04-08 Nick Clifton <nickc@cygnus.com>
1110 * configure.in: Add support for MCore target.
1111 * configure: Regenerate.
1113 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
1115 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1116 RUNTEST instead of commenting out, fixes portability problem.
1118 1999-02-08 Nick Clifton <nickc@cygnus.com>
1120 * configure.in: Add support for StrongARM target.
1121 * configure: Regenerate.
1123 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1125 * configure.in: Require autoconf 2.12.1 or higher.
1127 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
1129 * configure.in (i960-*-*): Add.
1130 * configure: Rebuild.
1132 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
1134 * configure.in: Added case for fr30-*-*.
1135 * configure: Regenerated.
1137 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
1139 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1140 to allow successful operation on Windows.
1142 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1144 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1145 check can be invoked recursively.
1147 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1149 * configure.in: Build simulator on sparclite and sparc86x targets.
1150 * configure: Regenerate.
1152 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1154 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1155 to autoconf and autoheader.
1157 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1159 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1160 ../common' to autoconf and autoheader. Unconditionally run
1161 autoconf in every subdir.
1162 (autoconf-changelog autoheader-changelog): Unconditionally run
1163 commands in every subdir.
1164 (autoconf-install autoheader-install): Likewise.
1166 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1168 * Makefile.in: Get SHELL from configure.
1169 * (FLAGS_TO_PASS): Pass down SHELL.
1170 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1173 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1175 * configure.in (extra_subdirs): Enable igen for mn10300.
1176 * configure: Re-generate.
1178 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1180 * configure.in (extra_subdirs): Add support for thumb target.
1182 * configure (extra_subdirs): Add support for thumb target.
1184 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1186 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1188 * configure: Regenerate.
1190 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1192 * configure.in (extra_subdirs): v850ea needs igen.
1193 * configure: Re-generate.
1195 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1197 * configure.in (testdir): When a testsuite directory, add that to
1198 the list of confdirs.
1200 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1202 * configure.in (extra_subdirs): Enable igen ready for V850.
1204 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1206 * configure.in (w65-*-*, only_if_enabled): Set.
1207 * configure: Re-generate.
1209 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1211 * configure.in (sparc*-*-*, only_if_enabled): Set
1212 only_if_enabled=yes. Check only_if_enabled before enabling a
1214 * configure: Regenerate.
1216 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1218 * configure.in (extra_subdirs): Add v850e target.
1220 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1222 * configure.in (extra_subdirs): Add v850ea target.
1224 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1226 * configure.in (sparc*-*-*): Don't build erc32.
1227 * configure: Regenerate.
1229 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1231 * configure.in (m32r-*-*): New target.
1232 * configure: Regenerate.
1234 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1236 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1238 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1239 thought that .NOEXPORT was the default target.
1241 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1243 * Makefile.in (clean mostlyclean): Restore targets accidentally
1244 deleted in earlier change.
1246 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1248 * Makefile.in (autoheader-common, autoheader-changelog,
1249 autoheader-install): Perform autoheader in addition to autoconf.
1251 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1253 * Makefile.in (autoconf-install): New target.
1254 (autoconf-changelog): Try different way to obtain user name.
1256 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1258 * Makefile.in (autoconf-changelog): New target, update
1259 ChangeLog for all subdirectories - normally used after
1260 autoconf-common target.
1262 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1264 * configure.in (extra_subdirs): Include testsuite for d30v.
1265 * configure: Regenerate.
1267 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1269 (check): New rules - drive the testsuite.
1271 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1273 * configure.in: Add mn10200 configure lines accidentally
1275 * configure: Regenerated.
1277 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1279 * configure.in (extra_subdirs): Generalize common sub directory
1281 (extra_subdirs): For d30v add igen to the list to be built.
1283 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1285 * configure.in (d30v): New target.
1286 * configure: Regenerated.
1288 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1290 * configure.in: Don't require GCC to build the mn10200
1292 * configure: Rebuilt.
1294 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1296 * configure.in: Don't configure any subdirs if no simulator
1297 is being built. Don't use erc32 for sparc64.
1298 * configure: Regenerated.
1300 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1302 * Makefile.in (autoconf-common): New target.
1303 * configure.in: Do configure common.
1304 * configure: Regenerated.
1306 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1308 * configure configure.in: Don't configure common anymore. Files
1309 from common are now built in the individual simualtor directories.
1310 This fixes problems with the WinGDB build procedure.
1312 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1314 * configure: Enable the mn10200 simulator.
1316 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1318 * configure.in (configdirs): Add common.
1319 * configure: Regenerated.
1321 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1323 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1324 system V based targets.
1325 * configure: Regenerate.
1327 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1329 * configure.in (--enable-sim-powerpc): Delete.
1330 (--enable-sim): Add.
1331 * configure: Regenerated.
1333 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1335 * configure.in: Only build the V850 simulator if
1337 * configure: Rebuild.
1339 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1341 * configure.in: Do build erc32 for DOS and Windows hosts.
1342 * configure: Rebuild.
1344 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1346 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1347 be inherited from the parent. Remove INSTALL_XFORM and
1348 INSTALL_XFORM1. Make INSTALL be set from configure.
1350 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1352 * configure.in: Only build the MIPS simulator if we are using
1354 * configure: Rebuild.
1356 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1358 * configure.in (v850-*-*): Added V850 simulator.
1360 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1362 * configure.in (d10v-*-*): Added D10V simulator.
1364 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1366 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1367 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1369 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1370 (AC_PROG_INSTALL): Added.
1371 * configure: Rebuilt.
1373 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1375 * configure.in: Only configure erc32 if using gcc.
1376 * configure: Rebuild.
1378 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1380 * configure.in (sim_target): Build PowerPC simulator for powerpc
1381 System V.4, Solaris, and Elf targets.
1382 * configure: Regenerate with autoconf 2.10.
1384 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1386 * configure.in: Only built erc32 simulator on Unix hosts as it
1388 * configure: Regenerated with autoconf 2.8.
1390 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1392 * erc32: Sparc simulator from the ESA.
1394 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1396 From: Miles Bader <miles@gnu.ai.mit.edu>
1397 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1398 * configure: Regenerate using autoconf.
1400 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1402 * Makefile.in (install): Fix typo.
1404 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1406 * configure: Regenerate with autoconf 2.7.
1408 * Makefile.in (all): Simplify.
1409 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1410 as in the all target.
1411 (distclean, maintainer-clean, realclean): Likewise.
1412 (install): Likewise.
1414 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1416 * Makefile.in (all): Remove extra '\' char from shell script.
1418 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1420 * Makefile.in (all): Avoid a for loop with zero elements, even if
1421 the loop will not be executed because of an if statement.
1423 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1425 * Makefile.in (install): Add missing semicolon in "fi \".
1427 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1429 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1430 defaults from configure.
1432 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1434 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1435 if either --enable-sim-powerpc is used, or the host compiler is
1438 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1440 * configure.in (mips*-*-*): Added "mips" simulator target.
1441 * configure: Re-generated.
1443 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1445 * Makefile.in (BISON): Remove macro.
1446 (FLAGS_TO_PASS): Remove BISON.
1448 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1450 * configure.in: Explicitly `exit 0' for broken shells.
1451 * configure: Rebuilt.
1453 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1455 * common/run.c (main): Initialize the callbacks.
1457 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1459 * Makefile.in (maintainer-clean): New synonym for realclean.
1461 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1463 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1464 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1466 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1468 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1469 <cagney@highland.com.au>.
1470 * configure: Regnerate from configure.in.
1472 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1474 * Update all FSF addresses except those in COPYING* files.
1476 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1478 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1479 submakes either default or passed in value.
1481 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1483 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1484 install): Changed targets so that they descend all
1485 subdirectories in $(SUBDIRS).
1486 (*-all, *-clean, *-install): Removed targets.
1488 * configure.in: Don't bother with target makefile fragments, they
1489 are no longer needed.
1490 * configure: regenerated.
1492 * Makefile.in, configure.in: converted to autoconf.
1493 * configure: New file, generated with autconf 2.4.
1495 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1497 * Makefile.in: Support ARM.
1498 * configure.in: Ditto.
1500 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1502 * Makefile.in: Support W65.
1503 * configure.in: Ditto.
1505 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1507 * Makefile.in: Add TAGS target.
1509 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1511 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1512 install-h8300, clean-h8300, all-h8500, install-h8500,
1513 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1516 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1518 * Makefile.in: remove endian.h trace from h8500
1520 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1522 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1524 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1526 * Makefile.in: make all of the all-* target (except all-nothing)
1527 depend on endian.h, so that if we're not building a simulator, we
1530 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1532 * Makefile.in (check, installcheck): Added dummy targets.
1534 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1536 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1537 explicitly make it, since some makes apparently don't work with
1538 VPATH and .c to executable rules (SunOS make for example).
1540 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1542 * Makefile.in (endian): Add explicit rule for broken makes.
1544 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1546 * Makefile.in (info, install-info): New targets.
1547 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1550 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1552 * Makefile.in (endian.h): build endian.h via a temporary file so
1553 that we don't leave an incomplete file lying around on
1555 (clean): remove endian, e.h, and endian.h.
1557 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1559 * Makefile.in, configure.in: if target isn't supported, build a