1 2021-01-12 Mike Frysinger <vapier@gentoo.org>
3 * README-HACKING (SIM_RUN_OBJS): Delete.
5 2021-01-09 Mike Frysinger <vapier@gentoo.org>
7 * MAINTAINERS (sh64): Move to past maintainers.
8 * configure: Regenerate.
9 * configure.tgt (sh64*-*-*): Delete.
12 2021-01-09 Mike Frysinger <vapier@gentoo.org>
14 * README-HACKING (AC_PREREQ): Delete.
16 2021-01-08 Mike Frysinger <vapier@gentoo.org>
18 * README-HACKING (C Language Assumptions): Require C11 compiler.
20 2020-09-03 Jose E. Marchesi <jose.marchesi@oracle.com>
22 * configure.ac: Do not configure sim/testsuite nor sim/igen if the
23 primary target doesn't have a simulator.
24 * configure: Regenerate.
26 2020-08-04 Jose E. Marchesi <jose.marchesi@oracle.com>
27 David Faust <david.faust@oracle.com>
29 * configure.tgt (sim_arch): Add entry for bpf-*-*.
30 * configure: Regenerate.
31 * MAINTAINERS: Add maintainer for the BPF simulator.
33 2019-12-19 Tom Tromey <tromey@adacore.com>
36 * Makefile.in (install-strip): New target.
38 2019-09-23 Dimitar Dimitrov <dimitar@dinux.eu>
40 * MAINTAINERS: Add myself as PRU maintainer.
41 * configure: Regenerated.
42 * configure.tgt: Add PRU.
44 2019-09-18 Alan Modra <amodra@gmail.com>
46 * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
47 * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
48 * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
49 * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
50 * rx/trace.c: Update throughout for bfd section macro changes.
52 2019-02-28 Joel Brobecker <brobecker@adacore.com>
54 * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
56 2019-02-13 Simon Marchi <simon.marchi@ericsson.com>
58 * MAINTAINERS: Add Andrew Burgess as global maintainer.
60 2019-01-03 Pavel I. Kryukov <kryukov@frtk.ru>
62 * sim-base.h: Add 'extern C' if header is compiled with C++.
64 2018-12-06 Andrew Burgess <andrew.burgess@embecosm.com>
66 * common/acinclude.m4 (enable-cgen-maint): Support passing path to
68 * cris/configure: Regenerate.
69 * frv/configure: Regenerate.
70 * iq2000/configure: Regenerate.
71 * lm32/configure: Regenerate.
72 * m32r/configure: Regenerate.
73 * or1k/configure: Regenerate.
74 * sh64/configure: Regenerate.
76 2018-07-20 Maciej W. Rozycki <macro@mips.com>
78 * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
81 2018-07-19 DJ Delorie <dj@redhat.com>
83 * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
85 2018-07-14 Stafford Horne <shorne@gmail.com>
87 * MAINTAINERS (or1k): Add myself as or1k maintainer.
89 2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
91 * All configure.ac: Remove AC_PREREQ.
92 * All configure: Re-generate.
94 2018-01-22 Maciej W. Rozycki <macro@mips.com>
96 * MAINTAINERS: Update my company e-mail address.
98 2017-12-12 Stafford Horne <shorne@gmail.com>
99 Peter Gavin <pgavin@gmail.com>
101 * configure: Regenerated.
103 2017-12-12 Stafford Horne <shorne@gmail.com>
104 Peter Gavin <pgavin@gmail.com>
106 * configure.tgt: Add or1k sim.
108 2017-10-12 James Bowman <james.bowman@ftdichip.com>
110 * MAINTAINERS (ft32): Add myself.
112 2017-10-03 Jim Wilson <wilson@tuliptree.org>
114 * MAINTAINERS (aarch64): Update my email address.
116 2017-09-06 John Baldwin <jhb@FreeBSD.org>
118 * configure.ac: Honor existing CC_FOR_BUILD in environment.
119 * configure: Regenerate.
121 2017-02-14 Jim Wilson <jim.wilson@linaro.org>
123 * MAINTAINTERS (aarch64): Add myself.
125 2016-12-14 Maciej W. Rozycki <macro@imgtec.com>
127 * MAINTAINERS (Maintainers for particular sims): Add myself as
130 2016-02-03 Maciej W. Rozycki <macro@linux-mips.org>
132 * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
134 2016-01-09 Mike Frysinger <vapier@gentoo.org>
136 * configure.ac: Delete sim_common check and the
137 AC_CONFIG_SUBDIRS(common) call.
138 * configure: Regenerate.
139 * configure.tgt (sim_common): Delete the variable.
141 2016-01-09 Mike Frysinger <vapier@gentoo.org>
143 * .gitignore: Delete /common/cconfig.h entry.
145 2016-01-05 Nick Clifton <nickc@redhat.com>
147 * MAINTAINERS: Add myself as AArch64 sim maintainer.
149 2015-12-09 Tristan Gingold <gingold@adacore.com>
151 * aarch64/simulator.c: Remove syscall.h include.
153 2015-12-26 Mike Frysinger <vapier@gentoo.org>
155 * README-HACKING: Delete mention of tconfig.h.
157 2015-11-24 Nick Clifton <nickc@redhat.com>
159 * configure.tgt: Add aarch64 entry.
160 * configure: Regenerate.
162 2015-06-23 Mike Frysinger <vapier@gentoo.org>
164 * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
165 * configure: Regenerate.
167 2015-06-12 Mike Frysinger <vapier@gentoo.org>
169 * README-HACKING: Change configure.in to configure.ac.
171 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
173 * arm/configure: Regenerated.
174 * avr/configure: Likewise.
175 * bfin/configure: Likewise.
176 * common/configure: Likewise.
177 * cr16/configure: Likewise.
178 * cris/configure: Likewise.
179 * d10v/configure: Likewise.
180 * erc32/configure: Likewise.
181 * frv/configure: Likewise.
182 * ft32/configure: Likewise.
183 * h8300/configure: Likewise.
184 * igen/configure: Likewise.
185 * iq2000/configure: Likewise.
186 * lm32/configure: Likewise.
187 * m32c/configure: Likewise.
188 * m32r/configure: Likewise.
189 * m68hc11/configure: Likewise.
190 * mcore/configure: Likewise.
191 * microblaze/configure: Likewise.
192 * mips/configure: Likewise.
193 * mn10300/configure: Likewise.
194 * moxie/configure: Likewise.
195 * msp430/configure: Likewise.
196 * ppc/configure: Likewise.
197 * rl78/configure: Likewise.
198 * rx/configure: Likewise.
199 * sh/configure: Likewise.
200 * sh64/configure: Likewise.
201 * v850/configure: Likewise.
203 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
205 * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
206 (BFD_LIB): Remove $(ZLIB).
207 (CONFIG_LIBS): Add $(ZLIB).
208 * ppc/Makefile.in (ZLIBINC): Removed.
209 (INCLUDES): Remove $(ZLIBINC).
210 (BFD_LIB): Remove $(ZLIB).
212 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
214 * arm/configure: Regenerated.
215 * avr/configure: Likewise.
216 * bfin/configure: Likewise.
217 * common/configure: Likewise.
218 * cr16/configure: Likewise.
219 * cris/configure: Likewise.
220 * d10v/configure: Likewise.
221 * erc32/configure: Likewise.
222 * frv/configure: Likewise.
223 * ft32/configure: Likewise.
224 * h8300/configure: Likewise.
225 * igen/configure: Likewise.
226 * iq2000/configure: Likewise.
227 * lm32/configure: Likewise.
228 * m32c/configure: Likewise.
229 * m32r/configure: Likewise.
230 * m68hc11/configure: Likewise.
231 * mcore/configure: Likewise.
232 * microblaze/configure: Likewise.
233 * mips/configure: Likewise.
234 * mn10300/configure: Likewise.
235 * moxie/configure: Likewise.
236 * msp430/configure: Likewise.
237 * ppc/configure: Likewise.
238 * rl78/configure: Likewise.
239 * rx/configure: Likewise.
240 * sh/configure: Likewise.
241 * sh64/configure: Likewise.
242 * v850/configure: Likewise.
244 2015-03-29 Mike Frysinger <vapier@gentoo.org>
246 * configure: Regenerate.
247 * configure.ac: Delete sim_testsuite check and config in testsuite.
248 * configure.tgt (sim_testsuite): Delete everywhere.
250 2015-03-28 Mike Frysinger <vapier@gentoo.org>
252 * configure: Regenerate.
253 * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
255 2015-03-28 James Bowman <james.bowman@ftdichip.com>
257 * configure.tgt: Add FT32 entry.
258 * configure: Regenerate.
260 2015-03-16 Mike Frysinger <vapier@gentoo.org>
262 * .gitignore: Delete tconfig.h.
263 * README-HACKING: Change tconfig.in to tconfig.h.
265 2014-03-12 Nick Clifton <nickc@redhat.com>
267 * MAINTAINERS: Add myself as the maintainer for the MSP430.
269 2014-03-10 Mike Frysinger <vapier@gentoo.org>
271 * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
272 * configure: Regenerate.
274 2014-01-06 Tom Tromey <tromey@redhat.com>
276 * common/cgen-trace.c: Don't use old VA_* macros.
277 * common/sim-load.c (xprintf): Likewise.
278 * common/sim-trace.c (trace_printf, debug_printf): Likewise.
280 2014-01-06 Tom Tromey <tromey@redhat.com>
282 * README-HACKING: Don't use PARAMS.
283 * arm/wrapper.c: Don't use PARAMS.
284 * bfin/sim-main.h: Don't use PARAMS.
285 * common/callback.c: Don't use PARAMS.
286 * common/cgen-trace.c: Don't use PARAMS.
287 * common/run-sim.h: Don't use PARAMS.
288 * common/run.c: Don't use PARAMS.
289 * common/sim-base.h: Don't use PARAMS.
290 * common/sim-load.c: Don't use PARAMS.
291 * common/sim-options.h: Don't use PARAMS.
292 * common/sim-trace.c: Don't use PARAMS.
293 * common/sim-trace.h: Don't use PARAMS.
294 * common/sim-utils.h: Don't use PARAMS.
295 * cr16/cr16_sim.h: Don't use PARAMS.
296 * cr16/gencode.c: Don't use PARAMS.
297 * cr16/interp.c: Don't use PARAMS.
298 * cr16/simops.c: Don't use PARAMS.
299 * d10v/d10v_sim.h: Don't use PARAMS.
300 * d10v/gencode.c: Don't use PARAMS.
301 * d10v/interp.c: Don't use PARAMS.
302 * d10v/simops.c: Don't use PARAMS.
303 * erc32/erc32.c: Don't use PARAMS.
304 * erc32/exec.c: Don't use PARAMS.
305 * erc32/float.c: Don't use PARAMS.
306 * erc32/func.c: Don't use PARAMS.
307 * erc32/sis.c: Don't use PARAMS.
308 * erc32/sis.h: Don't use PARAMS.
309 * mips/interp.c: Don't use PARAMS.
310 * mips/sim-main.h: Don't use PARAMS.
311 * sh/interp.c: Don't use PARAMS.
312 * v850/sim-main.h: Don't use PARAMS.
313 * v850/v850_sim.h: Don't use PARAMS.
315 2013-11-07 Will Newton <will.newton@linaro.org>
318 * arm/wrapper.c (sim_create_inferior): Call init before
321 2013-11-07 Will Newton <will.newton@linaro.org>
324 * arm/wrapper.c (sim_create_inferior): Avoid calling
325 bfd_get_mach with a NULL bfd.
327 2013-06-21 Nick Clifton <nickc@redhat.com>
329 * msp430: New Directory.
330 * configure.tgt: Add it.
331 * configure: Regenerate.
333 2013-03-15 Steve Ellcey <sellcey@mips.com>
335 * arm/wrapper.c (sim_complete_command): Make char arguments const.
336 * avr/interp.c (sim_complete_command): Ditto.
337 * common/sim-options.c (sim_complete_command): Ditto.
338 * cr16/interp.c (sim_complete_command): Ditto.
339 * erc32/interf.c (sim_complete_command): Ditto.
340 * m32c/gdb-if.c (sim_complete_command): Ditto.
341 * microblaze/interp.c (sim_complete_command): Ditto.
342 * ppc/sim_calls.c (sim_complete_command): Ditto.
343 * rl78/gdb-if.c (sim_complete_command): Ditto.
344 * rx/gdb-if.c (sim_complete_command): Ditto.
345 * sh/interp.c (sim_complete_command): Ditto.
347 2013-01-01 Joel Brobecker <brobecker@adacore.com>
349 Update year range in copyright notice of all files.
351 2012-12-19 Joel Brobecker <brobecker@adacore.com>
353 Update old contact info in GPL license notices.
355 2012-12-19 Joel Brobecker <brobecker@adacore.com>
357 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
359 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
361 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
363 * common/acinclude.m4: Define lt_cv_dlopen_libs.
364 * arm/configure: Regenerate.
365 * avr/configure: Regenerate.
366 * bfin/configure: Regenerate.
367 * common/configure: Regenerate.
368 * cr16/configure: Regenerate.
369 * cris/configure: Regenerate.
370 * d10v/configure: Regenerate.
371 * erc32/configure: Regenerate.
372 * frv/configure: Regenerate.
373 * h8300/configure: Regenerate.
374 * igen/configure: Regenerate.
375 * iq2000/configure: Regenerate.
376 * lm32/configure: Regenerate.
377 * m32c/configure: Regenerate.
378 * m32r/configure: Regenerate.
379 * m68hc11/configure: Regenerate.
380 * mcore/configure: Regenerate.
381 * microblaze/configure: Regenerate.
382 * mips/configure: Regenerate.
383 * mn10300/configure: Regenerate.
384 * moxie/configure: Regenerate.
385 * ppc/configure: Regenerate.
386 * rl78/configure: Regenerate.
387 * rx/configure: Regenerate.
388 * sh/configure: Regenerate.
389 * sh64/configure: Regenerate.
390 * testsuite/configure: Regenerate.
391 * v850/configure: Regenerate.
393 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
395 * MAINTAINERS: Update my email address.
397 2012-09-24 Steve Ellcey <sellcey@mips.com>
399 * mips/basic.exp: Add mips*-mti-elf* target.
400 * configure.ac: Add mips*-mti-elf* target.
401 * configure: Regenerate.
403 2012-06-15 Joel Brobecker <brobecker@adacore.com>
405 * configure: Regenerate.
407 2012-06-06 Michael Eager <eager@eagercon.com>
409 * microblaze/interp.c (config.h): Add #include.
411 2011-11-29 Joel Brobecker <brobecker@adacore.com>
413 * MAINTAINERS (Global Maintainers): New section. Add Mike
416 2011-11-28 DJ Delorie <dj@redhat.com>
418 * configure.tgt: Add rl78 support.
419 * configure: Regenerate.
420 * rl78: New directory.
421 * MAINTAINERS: Add myself as RL78 maintainer.
423 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
425 * MAINTAINERS: Remove Thiemo Seufer.
427 2011-06-04 Mike Frysinger <vapier@gentoo.org>
429 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
430 * configure: Regenerate.
432 2011-05-04 Joseph Myers <joseph@codesourcery.com>
434 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
436 * configure: Regenerate.
438 2011-03-05 Mike Frysinger <vapier@gentoo.org>
440 * MAINTAINERS: Add bfin entry.
441 * configure.tgt (bfin-*-*): Handle bfin targets.
442 * configure: Regenerate.
444 2011-01-05 Mike Frysinger <vapier@gentoo.org>
446 * .gitignore: Add /*/hw-config.h.
448 2010-12-23 Mike Frysinger <vapier@gentoo.org>
450 * .gitignore: New file.
452 2010-07-28 DJ Delorie <dj@redhat.com>
454 * MAINTAINERS: Add self as RX maintainer. Sort list.
456 2010-06-08 Nick Clifton <nickc@redhat.com>
458 * reg.c (set_oszc): Use unsigned int for the mask.
459 (set_szc, set_osz, set_sz): Likewise.
461 2010-04-26 Mike Frysinger <vapier@gentoo.org>
463 * configure.ac: Target logic moved out to and included from ...
464 * configure.tgt: ... this new file.
465 * configure: Regenerated.
467 2010-04-12 Mike Frysinger <vapier@gentoo.org>
469 * README-HACKING: Add more sections.
471 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
473 * avr/configure: Regenerate.
474 * cris/configure: Regenerate.
475 * microblaze/configure: Regenerate.
477 2009-11-24 Joel Brobecker <brobecker@adacore.com>
479 * common/aclocal.m4: Add include of ../../config/zlib.m4.
480 * common/common.m4: Use AM_ZLIB to check for zlib support.
481 * ppc/configure.ac: Likewise.
482 * arm/configure, avr/configure, common/configure, cr16/configure,
483 cris/configure, d10v/configure, erc32/configure, frv/configure,
484 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
485 m32r/configure, m68hc11/configure, mcore/configure,
486 microblaze/configure, mips/configure, mn10300/configure,
487 moxie/configure, ppc/configure, sh/configure, sh64/configure,
488 v850/configure: Regenerate.
490 2009-11-24 DJ Delorie <dj@redhat.com>
493 * configure.ac: Add entry for Renesas RX.
494 * configure: Regenerate.
496 2009-10-16 Doug Evans <dje@sebabeach.org>
498 * MAINTAINERS: Add myself as m32r maintainer.
500 2009-10-15 Michael Egaer <eager@eagercon.com>
502 * MAINTAINERS: Add self as MicroBlaze maintainer.
504 2009-10-14 Ben Elliston <bje@gnu.org>
506 * MAINTAINERS (common): Move myself to "past maintainers" section.
508 2009-10-06 Michael Eager <eager@eagercon.com>
510 * microblaze/interp.c: Add include microblaze-dis.h.
512 2009-09-23 Michael Eager <eager@eagercon.com>
514 * configure: Add microblaze-*.* (not regenerated).
515 * configure.ac: Likewise.
516 * microblaze/config.in: New.
517 * microblaze/configure: Generate.
518 * microblaze/configure.ac: New.
519 * microblaze/interp.c: New.
520 * microblaze/Makefile.in: New.
521 * microblaze/microblaze.h: New.
522 * microblaze/microblaze.isa: New.
523 * microblaze/sim-main.h: New.
524 * microblaze/sysdep.h: New.
526 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
528 * avr/config.in: Regenerate.
529 * avr/configure: Likewise.
530 * configure: Likewise.
531 * cris/config.in: Likewise.
532 * cris/configure: Likewise.
534 * configure.ac: m4_include toplevel config/override.m4.
535 * configure: Regenerate.
536 * avr/configure: Regenerate.
537 * cris/configure: Regenerate.
539 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
541 * Makefile.in (datarootdir): New variable.
543 2009-05-18 Jon Beniston <jon@beniston.com>
545 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
546 * configure.ac: Add lm32 target.
547 * lm32: New directory.
549 2009-05-11 Andrew Cagney <cagney@gnu.org>
551 * MAINTAINERS: Orphan ppc.
553 2009-04-30 Anthony Green <green@moxielogic.com>
555 * MAINTAINERS: Add myself for the moxie port.
556 * moxie: New directory.
557 * configure.ac: Add entry for moxie.
558 * configure: Regenerate.
560 2009-04-27 Tristan Gingold <gingold@adacore.com>
562 * avr: New directory.
563 * configure.ac: Add avr.
564 * configure: Regenerated.
566 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
568 * Makefile.in: Add dummy install-pdf, html, and
569 install-html targets.
571 2008-07-29 Nick Clifton <nickc@redhat.com>
573 * common/genmloop.sh: Add new parameter: -shell to specify the
574 command interpreter to use to run the input file. This is
575 necessary because otherwise SHELL is taken from the user's
576 environment, and not from the makefile that invoked this script
577 and the user might not be running an sh-like shell.
578 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
579 * fr30/Makefile.in: Likewise.
580 * frv/Makefile.in: Likewise.
581 * i960/Makefile.in: Likewise.
582 * iq2000/Makefile.in: Likewise.
583 * m32r/Makefile.in: Likewise.
585 * frv/mloop.in: Add missing start of line comment marker.
587 2008-05-09 Olivier Hainque <hainque@adacore.com>
589 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
591 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
593 * MAINTAINERS: Add myself as maintainer of cr16 port.
595 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
597 Add simulator for National cr16 processor.
598 * cr16: New directory.
599 * configure.ac: Add entry for National cr16.
600 * configure: Regenerate.
602 2008-02-05 DJ Delorie <dj@redhat.com>
604 * configure.ac (v850): V850 now has a testsuite.
605 * configure (v850): Likewise.
607 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
609 Updated copyright notices for most files.
611 2007-12-19 DJ Delorie <dj@redhat.com>
613 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
616 2007-08-24 Joel Brobecker <brobecker@adacore.com>
618 Switch the license of all files explicitly copyright the FSF
621 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
623 * Makefile.in: Add dummy "pdf" target.
625 2007-02-16 Thiemo Seufer <ths@mips.com>
627 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
629 2007-01-28 Manuel Lauss <slauss@resi.at>
631 * configure.ac (sh64-*-*): Change to sh64*-*-*.
632 (sh-*-*): Change to sh*-*-*.
633 * configure: Regenerated.
635 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
637 Updated copyright notices for most files.
639 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
641 * Makefile.in (autoconf-common autoheader-common): Only run
642 autoheader on subdirs with a file config.in.
644 * configure.ac (common): Make the default "yes" for all targets
646 * configure: Regenerate.
648 * Makefile.in (autoconf-common autoheader-common): In documented
649 usage, say SHELL=/bin/sh.
650 (.PHONY): Add autoheader-common.
652 * MAINTAINERS: Add self as authorized committer for *.
654 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
656 * MAINTAINERS: Add Dave Brolley for sh64.
658 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
660 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
661 * Makefile.in (FLAGS_TO_PASS): Include libdir.
662 * configure: Regenerated.
664 2006-05-05 Andreas Schwab <schwab@suse.de>
666 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
667 * configure: Regenerate.
669 * Makefile.in (CFLAGS_FOR_BUILD): Define.
670 (CC_FOR_BUILD): Don't override.
671 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
673 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
675 * MAINTAINERS: Add an "Authorized committers" section, and list
678 2006-03-13 DJ Delorie <dj@redhat.com>
680 * MAINTAINERS: Add self as m32c sim maintainer.
682 2006-01-23 Jim Blandy <jimb@redhat.com>
684 Add simulator for Renesas M32C and M16C.
686 * m32c: New directory.
687 * configure.ac: Add entry for Renesas M32C.
688 * configure: Regenerate.
690 2005-05-26 Chris Demetriou <cgd@netbsd.org>
692 * MAINTAINERS: Update my mail address, move myself to the
693 "Past maintainers" section.
695 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
697 * configure.ac: Add igen to v850 build.
698 * configure: Regenerate.
700 2005-04-29 Paul Brook <paul@codesourcery.com>
702 * common/callback.c (PIPE_BUF): Provide default definition.
703 (os_lstat): Use stat if lstat is not available on the host.
704 (os_ftruncate): Return EINVAL if not available on the host.
705 (os_truncate): Ditto.
706 * common/configure.ac: Check for lstat, truncate and ftruncate.
707 * common/configure: Regenerate.
708 * common/config.in: Regenerate.
710 2005-04-27 Paul Brook <paul@codesourcery.com>
712 * common/Make-common.in: Add $(EXEEXT) to "run".
714 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
716 * configure.ac: Add explicit sh64 case.
717 * configure: Regenerate.
719 2005-03-30 Paul Brook <paul@codesourcery.com>
721 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
723 2005-02-28 Jim Blandy <jimb@redhat.com>
725 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
726 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
727 Regenerated, after change to common/aclocal.m4.
729 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
731 * iq2000: New target subdirectory.
732 * configure.ac: Add iq2000 target.
733 * configure: Regenerate.
735 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
737 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
738 (realclean, install): Fail if subdir make failed.
740 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
742 * cris: New directory, simulator for Axis Communications CRIS
743 including CRIS v32, CGEN-based.
744 * configure.ac: Add corresponding configury.
745 * configure: Regenerate.
747 2005-01-17 Andrew Cagney <cagney@gnu.org>
749 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
750 common directory. Remove sparc*-*-* from list.
752 2005-01-11 Andrew Cagney <cagney@gnu.org>
754 * Makefile.in (autoconf-common autoheader-common): Add --force to
755 autoconf and autoheader.
756 (autoconf-common autoheader-common)
757 (autoconf-install autoheader-install): Check for configure.ac, not
759 * configure.ac: Delete AC_CONFIG_AUX_DIR.
760 * configure: Re-generate.
762 2005-01-07 Andrew Cagney <cagney@gnu.org>
764 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
765 correctly calls AC_CONFIG_SUBDIRS.
766 * configure: Re-generate.
768 2004-12-01 Andrew Cagney <cagney@gnu.org>
770 * i960, h8500: Delete directory.
772 2004-11-12 Andrew Cagney <cagney@gnu.org>
774 * d30v, fr30, mn10200, z8k: Delete directory.
776 2004-03-10 Ben Elliston <bje@gnu.org>
778 * MAINTAINERS: Update my mail address.
780 2004-01-26 Chris Demetriou <cgd@broadcom.com>
782 * configure.in (mips*-*-*): Configure in testsuite.
783 * configure: Regenerate.
785 2003-10-08 Dave Brolley <brolley@redhat.com>
787 * configure.in: Move frv handling to alphabetically correct placement.
789 2003-09-03 Andreas Schwab <schwab@suse.de>
791 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
793 2003-08-29 Dave Brolley <brolley@redhat.com>
795 * MAINTAINERS: Add myself as maintainer of the FRV port.
797 2003-08-20 Michael Snyder <msnyder@redhat.com>
798 Dave Brolley <brolley@redhat.com>
800 * frv/: New directory, simulator for the Fujitsu FRV.
801 * configure.in: Add frv configury.
802 * configure: Regenerate.
804 2003-08-10 Ben Elliston <bje@wasabisystems.com>
806 * MAINTAINERS: Update my mail address.
808 2003-08-09 Andrew Cagney <cagney@redhat.com>
810 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
811 maintenance. List igen and sh maintainers. Mention that target
812 and global maintainers pick up the slack.
814 2003-07-09 Michael Snyder <msnyder@redhat.com>
816 * configure.in: Add testsuite to extra_subdirs for sh.
817 * configure: Regenerate.
819 2003-01-23 Nick Clifton <nickc@redhat.com>
823 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
825 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
827 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
829 * MAINTAINERS: Update my email address.
831 2002-07-17 Andrew Cagney <ac131313@redhat.com>
833 * w65/: Delete directory.
835 2002-07-16 Andrew Cagney <ac131313@redhat.com>
837 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
838 * configure: Re-generate.
840 2002-07-13 Andrew Cagney <ac131313@redhat.com>
842 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
843 * configure: Re-generate.
845 2002-06-16 Andrew Cagney <ac131313@redhat.com>
847 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
848 id, date and host to be overriden by NAME, ID, DATE and HOST
849 respectfully. Use ISO dates.
851 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
853 * Makefile.in (ChangeLog): New makefile variable.
854 * README-HACKING: Mention the ChangeLog makefile variable.
856 2002-06-01 Andrew Cagney <ac131313@redhat.com>
858 * tic80/: Delete directory.
860 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
862 * MAINTAINERS: Update my email address.
864 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
866 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
868 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
870 * MAINTAINERS: Record self as a co-maintainer of just common/.
872 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
874 * MAINTAINERS: Point to GDB files describing overall maintaince
875 and check-in procedures.
877 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
879 * MAINTAINERS: Add myself for ARM portions.
881 2001-10-19 Andrew Cagney <ac131313@redhat.com>
883 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
884 * configure: Re-generate.
886 2001-02-16 Ben Elliston <bje@redhat.com>
888 * MAINTAINERS: Add myself for common portions.
890 2001-01-15 Chris Demetriou <cgd@broadcom.com>
892 * MAINTAINERS: Added self and Andrew for the mips sim.
894 2000-10-25 Geoff Keating <geoffk@cygnus.com>
896 * MAINTAINERS: Added self and Andrew for the ppc sim.
898 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
900 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
901 * m68hc11: New directory.
903 * configure: Regenerate.
905 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
907 * tic80: New directory.
908 * configure.in: Add configury.
909 * configure: Regenerate.
911 2000-04-20 Nick Clifton <nickc@cygnus.com>
913 * configure.in (extra_subdirs): Add testsuite to strongarm
915 * configure: Regenerate.
917 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
919 * MAINTAINERS: New file. Blank.
921 1999-11-18 Ben Elliston <bje@cygnus.com>
923 * configure.in: Require autoconf 2.13 and remove obsolete
924 invocation of AC_C_CROSS.
925 * configure: Regenerate.
927 1999-09-29 Doug Evans <devans@casey.cygnus.com>
929 * configure.in: Configure the testsuite directory for thumb.
930 * configure: Regenerate.
932 1999-07-16 Ben Elliston <bje@cygnus.com>
934 * configure.in: Configure the testsuite directory for arm.
935 * configure: Regenerate.
937 1999-04-08 Nick Clifton <nickc@cygnus.com>
939 * configure.in: Add support for MCore target.
940 * configure: Regenerate.
942 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
944 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
945 RUNTEST instead of commenting out, fixes portability problem.
947 1999-02-08 Nick Clifton <nickc@cygnus.com>
949 * configure.in: Add support for StrongARM target.
950 * configure: Regenerate.
952 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
954 * configure.in: Require autoconf 2.12.1 or higher.
956 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
958 * configure.in (i960-*-*): Add.
959 * configure: Rebuild.
961 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
963 * configure.in: Added case for fr30-*-*.
964 * configure: Regenerated.
966 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
968 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
969 to allow successful operation on Windows.
971 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
973 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
974 check can be invoked recursively.
976 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
978 * configure.in: Build simulator on sparclite and sparc86x targets.
979 * configure: Regenerate.
981 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
983 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
984 to autoconf and autoheader.
986 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
988 * Makefile.in (autoconf-common autoheader-common): Pass `-l
989 ../common' to autoconf and autoheader. Unconditionally run
990 autoconf in every subdir.
991 (autoconf-changelog autoheader-changelog): Unconditionally run
992 commands in every subdir.
993 (autoconf-install autoheader-install): Likewise.
995 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
997 * Makefile.in: Get SHELL from configure.
998 * (FLAGS_TO_PASS): Pass down SHELL.
999 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1002 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1004 * configure.in (extra_subdirs): Enable igen for mn10300.
1005 * configure: Re-generate.
1007 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1009 * configure.in (extra_subdirs): Add support for thumb target.
1011 * configure (extra_subdirs): Add support for thumb target.
1013 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1015 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1017 * configure: Regenerate.
1019 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1021 * configure.in (extra_subdirs): v850ea needs igen.
1022 * configure: Re-generate.
1024 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1026 * configure.in (testdir): When a testsuite directory, add that to
1027 the list of confdirs.
1029 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1031 * configure.in (extra_subdirs): Enable igen ready for V850.
1033 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1035 * configure.in (w65-*-*, only_if_enabled): Set.
1036 * configure: Re-generate.
1038 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1040 * configure.in (sparc*-*-*, only_if_enabled): Set
1041 only_if_enabled=yes. Check only_if_enabled before enabling a
1043 * configure: Regenerate.
1045 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1047 * configure.in (extra_subdirs): Add v850e target.
1049 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1051 * configure.in (extra_subdirs): Add v850ea target.
1053 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1055 * configure.in (sparc*-*-*): Don't build erc32.
1056 * configure: Regenerate.
1058 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1060 * configure.in (m32r-*-*): New target.
1061 * configure: Regenerate.
1063 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1065 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1067 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1068 thought that .NOEXPORT was the default target.
1070 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1072 * Makefile.in (clean mostlyclean): Restore targets accidentally
1073 deleted in earlier change.
1075 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1077 * Makefile.in (autoheader-common, autoheader-changelog,
1078 autoheader-install): Perform autoheader in addition to autoconf.
1080 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1082 * Makefile.in (autoconf-install): New target.
1083 (autoconf-changelog): Try different way to obtain user name.
1085 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1087 * Makefile.in (autoconf-changelog): New target, update
1088 ChangeLog for all subdirectories - normally used after
1089 autoconf-common target.
1091 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1093 * configure.in (extra_subdirs): Include testsuite for d30v.
1094 * configure: Regenerate.
1096 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1098 (check): New rules - drive the testsuite.
1100 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1102 * configure.in: Add mn10200 configure lines accidentally
1104 * configure: Regenerated.
1106 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1108 * configure.in (extra_subdirs): Generalize common sub directory
1110 (extra_subdirs): For d30v add igen to the list to be built.
1112 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1114 * configure.in (d30v): New target.
1115 * configure: Regenerated.
1117 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1119 * configure.in: Don't require GCC to build the mn10200
1121 * configure: Rebuilt.
1123 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1125 * configure.in: Don't configure any subdirs if no simulator
1126 is being built. Don't use erc32 for sparc64.
1127 * configure: Regenerated.
1129 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1131 * Makefile.in (autoconf-common): New target.
1132 * configure.in: Do configure common.
1133 * configure: Regenerated.
1135 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1137 * configure configure.in: Don't configure common anymore. Files
1138 from common are now built in the individual simualtor directories.
1139 This fixes problems with the WinGDB build procedure.
1141 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1143 * configure: Enable the mn10200 simulator.
1145 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1147 * configure.in (configdirs): Add common.
1148 * configure: Regenerated.
1150 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1152 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1153 system V based targets.
1154 * configure: Regenerate.
1156 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1158 * configure.in (--enable-sim-powerpc): Delete.
1159 (--enable-sim): Add.
1160 * configure: Regenerated.
1162 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1164 * configure.in: Only build the V850 simulator if
1166 * configure: Rebuild.
1168 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1170 * configure.in: Do build erc32 for DOS and Windows hosts.
1171 * configure: Rebuild.
1173 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1175 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1176 be inherited from the parent. Remove INSTALL_XFORM and
1177 INSTALL_XFORM1. Make INSTALL be set from configure.
1179 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1181 * configure.in: Only build the MIPS simulator if we are using
1183 * configure: Rebuild.
1185 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1187 * configure.in (v850-*-*): Added V850 simulator.
1189 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1191 * configure.in (d10v-*-*): Added D10V simulator.
1193 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1195 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1196 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1198 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1199 (AC_PROG_INSTALL): Added.
1200 * configure: Rebuilt.
1202 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1204 * configure.in: Only configure erc32 if using gcc.
1205 * configure: Rebuild.
1207 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1209 * configure.in (sim_target): Build PowerPC simulator for powerpc
1210 System V.4, Solaris, and Elf targets.
1211 * configure: Regenerate with autoconf 2.10.
1213 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1215 * configure.in: Only built erc32 simulator on Unix hosts as it
1217 * configure: Regenerated with autoconf 2.8.
1219 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1221 * erc32: Sparc simulator from the ESA.
1223 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1225 From: Miles Bader <miles@gnu.ai.mit.edu>
1226 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1227 * configure: Regenerate using autoconf.
1229 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1231 * Makefile.in (install): Fix typo.
1233 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1235 * configure: Regenerate with autoconf 2.7.
1237 * Makefile.in (all): Simplify.
1238 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1239 as in the all target.
1240 (distclean, maintainer-clean, realclean): Likewise.
1241 (install): Likewise.
1243 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1245 * Makefile.in (all): Remove extra '\' char from shell script.
1247 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1249 * Makefile.in (all): Avoid a for loop with zero elements, even if
1250 the loop will not be executed because of an if statement.
1252 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1254 * Makefile.in (install): Add missing semicolon in "fi \".
1256 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1258 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1259 defaults from configure.
1261 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1263 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1264 if either --enable-sim-powerpc is used, or the host compiler is
1267 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1269 * configure.in (mips*-*-*): Added "mips" simulator target.
1270 * configure: Re-generated.
1272 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1274 * Makefile.in (BISON): Remove macro.
1275 (FLAGS_TO_PASS): Remove BISON.
1277 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1279 * configure.in: Explicitly `exit 0' for broken shells.
1280 * configure: Rebuilt.
1282 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1284 * common/run.c (main): Initialize the callbacks.
1286 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1288 * Makefile.in (maintainer-clean): New synonym for realclean.
1290 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1292 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1293 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1295 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1297 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1298 <cagney@highland.com.au>.
1299 * configure: Regnerate from configure.in.
1301 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1303 * Update all FSF addresses except those in COPYING* files.
1305 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1307 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1308 submakes either default or passed in value.
1310 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1312 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1313 install): Changed targets so that they descend all
1314 subdirectories in $(SUBDIRS).
1315 (*-all, *-clean, *-install): Removed targets.
1317 * configure.in: Don't bother with target makefile fragments, they
1318 are no longer needed.
1319 * configure: regenerated.
1321 * Makefile.in, configure.in: converted to autoconf.
1322 * configure: New file, generated with autconf 2.4.
1324 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1326 * Makefile.in: Support ARM.
1327 * configure.in: Ditto.
1329 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1331 * Makefile.in: Support W65.
1332 * configure.in: Ditto.
1334 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1336 * Makefile.in: Add TAGS target.
1338 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1340 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1341 install-h8300, clean-h8300, all-h8500, install-h8500,
1342 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1345 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1347 * Makefile.in: remove endian.h trace from h8500
1349 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1351 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1353 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1355 * Makefile.in: make all of the all-* target (except all-nothing)
1356 depend on endian.h, so that if we're not building a simulator, we
1359 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1361 * Makefile.in (check, installcheck): Added dummy targets.
1363 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1365 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1366 explicitly make it, since some makes apparently don't work with
1367 VPATH and .c to executable rules (SunOS make for example).
1369 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1371 * Makefile.in (endian): Add explicit rule for broken makes.
1373 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1375 * Makefile.in (info, install-info): New targets.
1376 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1379 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1381 * Makefile.in (endian.h): build endian.h via a temporary file so
1382 that we don't leave an incomplete file lying around on
1384 (clean): remove endian, e.h, and endian.h.
1386 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1388 * Makefile.in, configure.in: if target isn't supported, build a