sim/ChangeLog

   1 2009-11-24  DJ Delorie  <dj@redhat.com>
   2
   3         * rx: New directory.
   4         * configure.ac: Add entry for Renesas RX.
   5         * configure: Regenerate.
   6
   7 2009-11-22  Doug Evans  <dje@sebabeach.org>
   8
   9         * cris/cpuall.h: Regenerate.
  10         * cris/cpuv10.h: Regenerate.
  11         * cris/cpuv32.h: Regenerate.
  12         * cris/decodev10.c: Regenerate.
  13         * cris/decodev10.h: Regenerate.
  14         * cris/decodev32.c: Regenerate.
  15         * cris/decodev32.h: Regenerate.
  16
  17 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  18
  19         * avr/interp.c (sim_write): Allow byte access.
  20         (sim_read): Ditto.
  21
  22 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  23
  24         * avr/interp.c (sim_load): Clear memory before loading.
  25
  26 2009-11-09  Tristan Gingold  <gingold@adacore.com>
  27
  28         * avr/interp.c (sim_resume): Fix typo for OP_ret.
  29
  30 2009-10-23  Doug Evans  <dje@sebabeach.org>
  31
  32         * cris/arch.c: Regenerate.
  33         * cris/arch.h: Regenerate.
  34         * cris/cpuall.h: Regenerate.
  35         * cris/cpuv10.c: Regenerate.
  36         * cris/cpuv10.h: Regenerate.
  37         * cris/cpuv32.c: Regenerate.
  38         * cris/cpuv32.h: Regenerate.
  39         * cris/cris-desc.c: Regenerate.
  40         * cris/cris-desc.h: Regenerate.
  41         * cris/cris-opc.h: Regenerate.
  42         * cris/decodev10.c: Regenerate.
  43         * cris/decodev10.h: Regenerate.
  44         * cris/decodev32.c: Regenerate.
  45         * cris/decodev32.h: Regenerate.
  46         * cris/modelv10.c: Regenerate.
  47         * cris/modelv32.c: Regenerate.
  48         * cris/semcrisv10f-switch.c: Regenerate.
  49         * cris/semcrisv32f-switch.c: Regenerate.
  50
  51 2009-10-22  Tristan Gingold  <gingold@adacore.com>
  52
  53         * avr/interp.c (sim_stop): Return 1.
  54
  55 2009-10-16  Doug Evans  <dje@sebabeach.org>
  56
  57         * MAINTAINERS: Add myself as m32r maintainer.
  58
  59 2009-10-15  Michael Egaer  <eager@eagercon.com>
  60
  61         * MAINTAINERS: Add self as MicroBlaze maintainer.
  62
  63 2009-10-14  Ben Elliston  <bje@gnu.org>
  64
  65         * MAINTAINERS (common): Move myself to "past maintainers" section.
  66
  67 2009-10-06  Michael Eager  <eager@eagercon.com>
  68
  69         * microblaze/interp.c: Add include microblaze-dis.h.
  70
  71 2009-09-23  Michael Eager  <eager@eagercon.com>
  72
  73         * configure: Add microblaze-*.* (not regenerated).
  74         * configure.ac: Likewise.
  75         * microblaze/config.in: New.
  76         * microblaze/configure: Generate.
  77         * microblaze/configure.ac: New.
  78         * microblaze/interp.c: New.
  79         * microblaze/Makefile.in: New.
  80         * microblaze/microblaze.h: New.
  81         * microblaze/microblaze.isa: New.
  82         * microblaze/sim-main.h: New.
  83         * microblaze/sysdep.h: New.
  84
  85 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  86
  87         * avr/config.in: Regenerate.
  88         * avr/configure: Likewise.
  89         * configure: Likewise.
  90         * cris/config.in: Likewise.
  91         * cris/configure: Likewise.
  92
  93         * configure.ac: m4_include toplevel config/override.m4.
  94         * configure: Regenerate.
  95         * avr/configure: Regenerate.
  96         * cris/configure: Regenerate.
  97
  98 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  99
 100         * Makefile.in (datarootdir): New variable.
 101
 102 2009-05-18  Jon Beniston <jon@beniston.com>
 103
 104         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 105         * configure.ac: Add lm32 target.
 106         * lm32: New directory.
 107
 108 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 109
 110         * MAINTAINERS: Orphan ppc.
 111
 112 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 113
 114         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 115         m32c_signal_to_target.  Change signal return values from SIGILL,
 116         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 117         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 118
 119 2009-04-30  Anthony Green  <green@moxielogic.com>
 120
 121         * MAINTAINERS: Add myself for the moxie port.
 122         * moxie: New directory.
 123         * configure.ac: Add entry for moxie.
 124         * configure: Regenerate.
 125
 126 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 127
 128         * avr: New directory.
 129         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 130         * avr/config.in: New file, generated by autoheader.
 131         * avr/configure: New file generated by autoconf.
 132         * configure.ac: Add avr.
 133         * configure: Regenerated.
 134
 135 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 136
 137         * Makefile.in: Add dummy install-pdf, html, and
 138         install-html targets.
 139
 140 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 141
 142         * cris/sim-if.c: Include errno.h.
 143         (cris_start_address, cris_program_offset): New variables.
 144         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 145         enums.
 146         (cris_options): New options --cris-program-offset and
 147         --cris-start-address.
 148         (cris_option_handler): Handle new options.
 149         (cris_program_offset_write, cris_set_section_offset_iterator)
 150         (cris_offset_sections, cris_offset_sections): New functions.
 151         (sim_load): Use cris_program_offset_write as function argument to
 152         cris_load_elf_file, not sim_write.
 153         (struct offsetinfo): New struct.
 154         (cris_handle_interpreter): Fix typo in comment.
 155         (sim_open): Call cris_offset_sections as soon as the bfd of the
 156         infile is available.  Gate bfd validity checks on abfd non-NULL.
 157         (sim_create_inferior): Let cris_start_address when != -1 override
 158         other start-address choices.
 159
 160 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 161
 162         * cris/traps.c (abort): Define to call sim_io_error.
 163         (create_map): Make -1 imply a non-fixed address, not 0.  All
 164         callers changed.  Only prefer the next higher unmapped address if
 165         the last mapped address is no less than 0x40000000.  Check that
 166         the address to be mapped is not already mapped.  Update head
 167         comment.
 168         (unmap_pages): Don't call abort when recursive call fails, just
 169         note and return an error if a page in the range couldn't be unmapped.
 170         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 171         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 172         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 173         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 174         don't abort on page not being mapped.  Handle non-anon filemap
 175         with length padded to pagesize.
 176
 177 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 178
 179         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 180         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 181         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 182         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 183         (TARGET_AT_CLKTCK): Remove redundant macros.
 184         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 185         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 186         callers.
 187         (sim_open): Also pass AT_SECURE.
 188
 189         * cris/sim-main.h (struct _sim_cpu): New member
 190         set_target_thread_data.
 191         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 192         * cris/crisv10f.c: Ditto.
 193         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 194         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 195         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 196         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 197         case.
 198
 199         * cris/traps.c (TARGET_SYS_exit_group): Define.
 200         (cris_break_13_handler): Handle it like the exit for the last
 201         thread.
 202
 203         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 204         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 205         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 206         2.6.27.  Set machine field to the BFD printable name of the
 207         machine.
 208
 209         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 210         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 211         TARGET_MAP_DENYWRITE.
 212
 213         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 214         (TARGET_X_OK, TARGET_F_OK): Define.
 215         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 216
 217         * cris/semcrisv32f-switch.c: Regenerate.
 218
 219 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 220
 221         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 222         just a short CRIS-specific notice.  Tweak the wording for a
 223         failing architecture test.
 224
 225         * cris/traps.c (TARGET_SYS_writev): New macro.
 226         (is_mapped_only, cris_dump_map): New functions.
 227         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 228         and prot combinations and a non-zero page-offset.  If
 229         TARGET_MAP_FIXED, unmap pages before mapping them.
 230         <case TARGET_SYS_mprotect>: When checking, allow any length
 231         argument.  Don't actually do anything.
 232         <case TARGET_SYS_writev>: New case.
 233
 234         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 235         * cris/sim-if.c: Include elf-bfd.h.
 236         (struct progbounds): New members end_loadmem, start_nonloadmem.
 237         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 238         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 239         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 240         static.  Update head comment.  Set new struct progbounds members.
 241         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 242         variables.
 243         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 244         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 245         functions.
 246         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 247         handling to use auxv_entries.  Improve error message and checking
 248         for invalid programs.  Use new variable abfd for the program
 249         instead of for each access reaching into sd to get it.
 250         (sim_create_inferior): If non-zero, use interp_start_addr instead
 251         of the program start address.
 252         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 253         stale comment.  Always specify little-endian.
 254
 255 2008-07-29  Nick Clifton  <nickc@redhat.com>
 256
 257         * common/genmloop.sh: Add new parameter: -shell to specify the
 258         command interpreter to use to run the input file.  This is
 259         necessary because otherwise SHELL is taken from the user's
 260         environment, and not from the makefile that invoked this script
 261         and the user might not be running an sh-like shell.
 262         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 263         * fr30/Makefile.in: Likewise.
 264         * frv/Makefile.in: Likewise.
 265         * i960/Makefile.in: Likewise.
 266         * iq2000/Makefile.in: Likewise.
 267         * m32r/Makefile.in: Likewise.
 268
 269         * frv/mloop.in: Add missing start of line comment marker.
 270
 271 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 272
 273         * cris/configure: Regenerate to track ../common/common.m4 changes.
 274         * cris/config.in: Ditto.
 275
 276 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 277             Daniel Jacobowitz  <dan@codesourcery.com>
 278             Joseph Myers  <joseph@codesourcery.com>
 279
 280         * cris/configure: Regenerate.
 281
 282 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 283
 284         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 285
 286 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 287
 288         * MAINTAINERS: Add myself as maintainer of cr16 port.
 289
 290 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 291
 292         Add simulator for National cr16 processor.
 293         * cr16: New directory.
 294         * configure.ac: Add entry for National cr16.
 295         * configure: Regenerate.
 296
 297 2008-02-05  DJ Delorie  <dj@redhat.com>
 298
 299         * configure.ac (v850): V850 now has a testsuite.
 300         * configure (v850): Likewise.
 301
 302 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 303
 304         Updated copyright notices for most files.
 305
 306 2007-12-19  DJ Delorie  <dj@redhat.com>
 307
 308         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 309         cut_point.
 310
 311 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 312
 313         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 314         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 315         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 316         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 317         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 318         cris/semcrisv32f-switch.c: Regenerate.
 319
 320 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 321
 322         Switch the license of all files explicitly copyright the FSF
 323         to GPLv3.
 324
 325 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 326
 327         * Makefile.in: Add dummy "pdf" target.
 328
 329 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 330
 331         * cris/traps.c (dump_statistics): Change format for cycle numbers
 332         to %llu and cast parameters to unsigned long long.
 333
 334 2007-02-16  Thiemo Seufer  <ths@mips.com>
 335
 336         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 337
 338 2007-01-28  Manuel Lauss  <slauss@resi.at>
 339
 340         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 341         (sh-*-*): Change to sh*-*-*.
 342         * configure: Regenerated.
 343
 344 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 345
 346         Updated copyright notices for most files.
 347
 348 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 349
 350         * Makefile.in (autoconf-common autoheader-common): Only run
 351         autoheader on subdirs with a file config.in.
 352
 353         * configure.ac (common): Make the default "yes" for all targets
 354         with sim subdirs.
 355         * configure: Regenerate.
 356
 357         * Makefile.in (autoconf-common autoheader-common): In documented
 358         usage, say SHELL=/bin/sh.
 359         (.PHONY): Add autoheader-common.
 360
 361         * MAINTAINERS: Add self as authorized committer for *.
 362
 363 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 364             Hans-Peter Nilsson  <hp@axis.com>
 365
 366         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 367         (cris_unknown_syscall_action): Declare.
 368         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 369         (cris_options): Add cris-unknown-syscall option.
 370         (cris_option_handler): Correct comment about and error message for
 371         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 372         * cris/traps.c: Include stdarg.h
 373         (cris_unknown_syscall): New function.
 374         (cris_break_13_handler): Instead of sim_io_eprintf and
 375         sim_engine_halt, call cris_unknown_syscall to handle more or less
 376         unknown syscalls.  Adjust code as necessary to handle return
 377         value.
 378
 379 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 380
 381         * MAINTAINERS: Add Dave Brolley for sh64.
 382
 383 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 384
 385         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 386         (cris_pipe_empty): Correct initialization of "remaining".  Only
 387         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 388         are written.
 389
 390 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 391
 392         * cris/configure.ac: Check for limits.h and sys/param.h.
 393         * cris/configure, cris/config.in: Rebuild.
 394         * cris/traps.c (SIM_PATHMAX): New macro.
 395         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 396
 397 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 398
 399         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 400         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 401         * configure: Regenerated.
 402
 403 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 404
 405         * cris/configure: Regenerated.
 406
 407 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 408
 409         * cris/configure: Regenerated.
 410
 411 2006-05-05  Andreas Schwab  <schwab@suse.de>
 412
 413         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 414         * configure: Regenerate.
 415
 416         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 417         (CC_FOR_BUILD): Don't override.
 418         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 419
 420 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 421
 422         * MAINTAINERS: Add an "Authorized committers" section, and list
 423         DJ Delorie for v850.
 424
 425 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 426
 427         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 428
 429 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 430
 431         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 432         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 433         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 434         (all): Depend on rvdummy$(EXEEXT).
 435         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 436         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 437         default off.
 438         * cris/configure: Regenerate.
 439         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 440         (enum cris_interrupt_type, crisv10deliver_interrupt)
 441         (crisv32deliver_interrupt: New declarations.
 442         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 443         sim_events_tickn and set state-events member work_pending when it's
 444         time for the next event.
 445         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 446         interrupt-delivery function.
 447         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 448         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 449         * cris/devices.c: Include hw-device.h.
 450         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 451         (device_io_write_buffer): Only perform 0x900000xx-functions if
 452         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 453         call hw_io_write_buffer.  Add return 0 last in function.
 454         * cris/sim-if.c (cris_have_900000xxif): Now global.
 455         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 456         Force "-model" option, effectively.
 457         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 458         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 459
 460 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 461
 462         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 463         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 464         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 465
 466 2006-03-13  DJ Delorie  <dj@redhat.com>
 467
 468         * MAINTAINERS: Add self as m32c sim maintainer.
 469
 470 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 471
 472         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 473         mapping.
 474         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 475
 476 2006-01-23  Jim Blandy  <jimb@redhat.com>
 477
 478         Add simulator for Renesas M32C and M16C.
 479
 480         * m32c: New directory.
 481         * configure.ac: Add entry for Renesas M32C.
 482         * configure: Regenerate.
 483
 484 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 485
 486         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 487         cycle count for the current insn.
 488
 489 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 490
 491         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 492         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 493         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 494         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 495
 496 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 497
 498         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 499         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 500         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 501         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 502         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 503         cris/semcrisv32f-switch.c: Regenerate.
 504
 505 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 506
 507         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 508         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 509         TARGET_O_WRONLY.
 510         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 511         F_GETFL on fd 0, 1 and 2.
 512
 513 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 514
 515         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 516         last_open_fd, last_open_flags.
 517         * cris/traps.c: Don't include targ-vals.h.
 518         (TARGET_O_ACCMODE): Define.
 519         (cris_break_13_handler): Set new _sim_cpu members.
 520         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 521         Rearrange code as switch.  Emit "unimplemented" abort for
 522         unimplemented fcntl calls.
 523
 524         * cris/traps.c (TARGET_SYS_stat): Define.
 525         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 526         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 527
 528 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 529
 530         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 531         low 32 bits are used after an unsigned long cast.
 532
 533 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 534
 535         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 536
 537 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 538
 539         * MAINTAINERS: Update my mail address, move myself to the
 540         "Past maintainers" section.
 541
 542 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 543
 544         * configure.ac: Add igen to v850 build.
 545         * configure: Regenerate.
 546
 547 2005-04-29  Paul Brook  <paul@codesourcery.com>
 548
 549         * common/callback.c (PIPE_BUF): Provide default definition.
 550         (os_lstat): Use stat if lstat is not available on the host.
 551         (os_ftruncate): Return EINVAL if not available on the host.
 552         (os_truncate): Ditto.
 553         * common/configure.ac: Check for lstat, truncate and ftruncate.
 554         * common/configure: Regenerate.
 555         * common/config.in: Regenerate.
 556
 557 2005-04-27  Paul Brook  <paul@codesourcery.com>
 558
 559         * common/Make-common.in: Add $(EXEEXT) to "run".
 560
 561 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 562
 563         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 564         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 565         implemented.  In call to create_map, pad length argument to 8k.
 566
 567 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 568
 569         * configure.ac: Add explicit sh64 case.
 570         * configure: Regenerate.
 571
 572 2005-03-30  Paul Brook  <paul@codesourcery.com>
 573
 574         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 575
 576 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 577
 578         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 579         include cgen-ops.h in decodev10.c and decodev32.c.
 580         * cris/sim-main.h: Don't include cgen-ops.h here.
 581         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 582         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 583         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 584         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 585         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 586         cris/semcrisv32f-switch.c: Regenerate.
 587
 588         * cris/traps.c (cris_break_13_handler) <case
 589         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 590         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 591
 592 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 593
 594         * cris/configure: Regenerate.
 595
 596 2005-02-28  Jim Blandy  <jimb@redhat.com>
 597
 598         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 599         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 600         Regenerated, after change to common/aclocal.m4.
 601
 602 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 603
 604         * iq2000: New target subdirectory.
 605         * configure.ac: Add iq2000 target.
 606         * configure: Regenerate.
 607
 608 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 609
 610         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 611         (realclean, install): Fail if subdir make failed.
 612
 613 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 614
 615         * cris: New directory, simulator for Axis Communications CRIS
 616         including CRIS v32, CGEN-based.
 617         * configure.ac: Add corresponding configury.
 618         * configure: Regenerate.
 619
 620 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 621
 622         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 623         common directory.  Remove sparc*-*-* from list.
 624
 625 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 626
 627         * Makefile.in (autoconf-common autoheader-common): Add --force to
 628         autoconf and autoheader.
 629         (autoconf-common autoheader-common)
 630         (autoconf-install autoheader-install): Check for configure.ac, not
 631         configure.in.
 632         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 633         * configure: Re-generate.
 634
 635 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 636
 637         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 638         correctly calls AC_CONFIG_SUBDIRS.
 639         * configure: Re-generate.
 640
 641 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 642
 643         * i960, h8500: Delete directory.
 644
 645 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 646
 647         * d30v, fr30, mn10200, z8k: Delete directory.
 648
 649 2004-03-10  Ben Elliston  <bje@gnu.org>
 650
 651         * MAINTAINERS: Update my mail address.
 652
 653 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 654
 655         * configure.in (mips*-*-*): Configure in testsuite.
 656         * configure: Regenerate.
 657
 658 2003-10-08  Dave Brolley  <brolley@redhat.com>
 659
 660         * configure.in: Move frv handling to alphabetically correct placement.
 661
 662 2003-09-03  Andreas Schwab  <schwab@suse.de>
 663
 664         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 665
 666 2003-08-29  Dave Brolley  <brolley@redhat.com>
 667
 668         * MAINTAINERS: Add myself as maintainer of the FRV port.
 669
 670 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 671             Dave Brolley  <brolley@redhat.com>
 672
 673         * frv/: New directory, simulator for the Fujitsu FRV.
 674         * configure.in: Add frv configury.
 675         * configure: Regenerate.
 676
 677 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 678
 679         * MAINTAINERS: Update my mail address.
 680
 681 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 682
 683         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 684         maintenance.  List igen and sh maintainers.  Mention that target
 685         and global maintainers pick up the slack.
 686
 687 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 688
 689         * configure.in: Add testsuite to extra_subdirs for sh.
 690         * configure: Regenerate.
 691
 692 2003-01-23  Nick Clifton  <nickc@redhat.com>
 693
 694         * Add sh2e support:
 695
 696 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 697
 698         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 699
 700 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 701
 702         * MAINTAINERS: Update my email address.
 703
 704 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 705
 706         * w65/: Delete directory.
 707
 708 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 709
 710         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 711         * configure: Re-generate.
 712
 713 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 714
 715         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 716         * configure: Re-generate.
 717
 718 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 719
 720         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 721         id, date and host to be overriden by NAME, ID, DATE and HOST
 722         respectfully.  Use ISO dates.
 723
 724 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 725
 726         * Makefile.in (ChangeLog): New makefile variable.
 727         * README-HACKING: Mention the ChangeLog makefile variable.
 728
 729 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 730
 731         * tic80/: Delete directory.
 732
 733 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 734
 735         * MAINTAINERS: Update my email address.
 736
 737 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 738
 739         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 740
 741 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 742
 743         * MAINTAINERS: Record self as a co-maintainer of just common/.
 744
 745 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 746
 747         * MAINTAINERS: Point to GDB files describing overall maintaince
 748         and check-in procedures.
 749
 750 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 751
 752         * MAINTAINERS: Add myself for ARM portions.
 753
 754 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 755
 756         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 757         * configure: Re-generate.
 758
 759 2001-02-16  Ben Elliston  <bje@redhat.com>
 760
 761         * MAINTAINERS: Add myself for common portions.
 762
 763 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 764
 765         * MAINTAINERS: Added self and Andrew for the mips sim.
 766
 767 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 768
 769         * MAINTAINERS: Added self and Andrew for the ppc sim.
 770
 771 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 772
 773         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 774         * m68hc11: New directory.
 775         * configure.in: Add.
 776         * configure: Regenerate.
 777
 778 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 779
 780         * tic80: New directory.
 781         * configure.in: Add configury.
 782         * configure: Regenerate.
 783
 784 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 785
 786         * configure.in (extra_subdirs): Add testsuite to strongarm
 787         directories.
 788         * configure: Regenerate.
 789
 790 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 791
 792         * MAINTAINERS: New file.  Blank.
 793
 794 1999-11-18  Ben Elliston  <bje@cygnus.com>
 795
 796         * configure.in: Require autoconf 2.13 and remove obsolete
 797         invocation of AC_C_CROSS.
 798         * configure: Regenerate.
 799
 800 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 801
 802         * configure.in: Configure the testsuite directory for thumb.
 803         * configure: Regenerate.
 804
 805 1999-07-16  Ben Elliston  <bje@cygnus.com>
 806
 807         * configure.in: Configure the testsuite directory for arm.
 808         * configure: Regenerate.
 809
 810 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 811
 812         * configure.in: Add support for MCore target.
 813         * configure: Regenerate.
 814
 815 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 816
 817         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 818         RUNTEST instead of commenting out, fixes portability problem.
 819
 820 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 821
 822         * configure.in: Add support for StrongARM target.
 823         * configure: Regenerate.
 824
 825 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 826
 827         * configure.in: Require autoconf 2.12.1 or higher.
 828
 829 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 830
 831         * configure.in (i960-*-*): Add.
 832         * configure: Rebuild.
 833
 834 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 835
 836         * configure.in: Added case for fr30-*-*.
 837         * configure: Regenerated.
 838
 839 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 840
 841         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 842         to allow successful operation on Windows.
 843
 844 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 845
 846         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 847         check can be invoked recursively.
 848
 849 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
 850
 851         * configure.in: Build simulator on sparclite and sparc86x targets.
 852         * configure: Regenerate.
 853
 854 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
 855
 856         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
 857         to autoconf and autoheader.
 858
 859 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
 860
 861         * Makefile.in (autoconf-common autoheader-common): Pass `-l
 862         ../common' to autoconf and autoheader.  Unconditionally run
 863         autoconf in every subdir.
 864         (autoconf-changelog autoheader-changelog): Unconditionally run
 865         commands in every subdir.
 866         (autoconf-install autoheader-install): Likewise.
 867
 868 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 869
 870         * Makefile.in:  Get SHELL from configure.
 871         * (FLAGS_TO_PASS):  Pass down SHELL.
 872         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
 873         NT native builds.
 874
 875 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 876
 877         * configure.in (extra_subdirs): Enable igen for mn10300.
 878         * configure: Re-generate.
 879
 880 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
 881
 882         * configure.in (extra_subdirs): Add support for thumb target.
 883
 884         * configure (extra_subdirs): Add support for thumb target.
 885
 886 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 887
 888         * configure.in (extra_subdirs): Add IGEN directory when MIPS
 889         target.
 890         * configure: Regenerate.
 891
 892 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 893
 894         * configure.in (extra_subdirs): v850ea needs igen.
 895         * configure: Re-generate.
 896
 897 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 898
 899         * configure.in (testdir): When a testsuite directory, add that to
 900         the list of confdirs.
 901
 902 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 903
 904         * configure.in (extra_subdirs): Enable igen ready for V850.
 905
 906 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 907
 908         * configure.in (w65-*-*, only_if_enabled): Set.
 909         * configure: Re-generate.
 910
 911 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 912
 913         * configure.in (sparc*-*-*, only_if_enabled): Set
 914         only_if_enabled=yes.  Check only_if_enabled before enabling a
 915         simulator.
 916         * configure: Regenerate.
 917
 918 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 919
 920         * configure.in (extra_subdirs): Add v850e target.
 921
 922 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 923
 924         * configure.in (extra_subdirs): Add v850ea target.
 925
 926 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
 927
 928         * configure.in (sparc*-*-*): Don't build erc32.
 929         * configure: Regenerate.
 930
 931 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
 932
 933         * configure.in (m32r-*-*): New target.
 934         * configure: Regenerate.
 935
 936         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
 937
 938 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 939
 940         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
 941         thought that .NOEXPORT was the default target.
 942
 943 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
 944
 945         * Makefile.in (clean mostlyclean): Restore targets accidentally
 946         deleted in earlier change.
 947
 948 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 949
 950         * Makefile.in (autoheader-common, autoheader-changelog,
 951         autoheader-install): Perform autoheader in addition to autoconf.
 952
 953 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
 954
 955         * Makefile.in (autoconf-install): New target.
 956         (autoconf-changelog): Try different way to obtain user name.
 957
 958 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 959
 960         * Makefile.in (autoconf-changelog): New target, update
 961         ChangeLog for all subdirectories - normally used after
 962         autoconf-common target.
 963
 964 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 965
 966         * configure.in (extra_subdirs): Include testsuite for d30v.
 967         * configure: Regenerate.
 968
 969         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
 970         ../gdb/Makefile.in
 971         (check): New rules - drive the testsuite.
 972
 973 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
 974
 975         * configure.in: Add mn10200 configure lines accidentally
 976         removed.
 977         * configure: Regenerated.
 978
 979 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
 980
 981         * configure.in (extra_subdirs): Generalize common sub directory
 982         into a list.
 983         (extra_subdirs): For d30v add igen to the list to be built.
 984
 985 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
 986
 987         * configure.in (d30v): New target.
 988         * configure: Regenerated.
 989
 990 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
 991
 992         * configure.in: Don't require GCC to build the mn10200
 993         simulator anymore.
 994         * configure: Rebuilt.
 995
 996 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
 997
 998         * configure.in: Don't configure any subdirs if no simulator
 999         is being built.  Don't use erc32 for sparc64.
1000         * configure: Regenerated.
1001
1002 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1003
1004         * Makefile.in (autoconf-common): New target.
1005         * configure.in: Do configure common.
1006         * configure: Regenerated.
1007
1008 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1009
1010         * configure configure.in:  Don't configure common anymore.  Files
1011         from common are now built in the individual simualtor directories.
1012         This fixes problems with the WinGDB build procedure.
1013
1014 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1015
1016         * configure: Enable the mn10200 simulator.
1017
1018 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1019
1020         * configure.in (configdirs): Add common.
1021         * configure: Regenerated.
1022
1023 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1024
1025         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1026         system V based targets.
1027         * configure: Regenerate.
1028
1029 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1030
1031         * configure.in (--enable-sim-powerpc): Delete.
1032         (--enable-sim): Add.
1033         * configure: Regenerated.
1034
1035 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1036
1037         * configure.in: Only build the V850 simulator if
1038         we are using gcc.
1039         * configure: Rebuild.
1040
1041 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1042
1043         * configure.in: Do build erc32 for DOS and Windows hosts.
1044         * configure: Rebuild.
1045
1046 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1047
1048         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1049         be inherited from the parent.  Remove INSTALL_XFORM and
1050         INSTALL_XFORM1.  Make INSTALL be set from configure.
1051
1052 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1053
1054         * configure.in: Only build the MIPS simulator if we are using
1055         gcc.
1056         * configure: Rebuild.
1057
1058 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1059
1060         * configure.in (v850-*-*): Added V850 simulator.
1061
1062 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1063
1064         * configure.in (d10v-*-*): Added D10V simulator.
1065
1066 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1067
1068         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1069         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1070         (docdir): Removed.
1071         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1072         (AC_PROG_INSTALL): Added.
1073         * configure: Rebuilt.
1074
1075 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1076
1077         * configure.in: Only configure erc32 if using gcc.
1078         * configure: Rebuild.
1079
1080 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1081
1082         * configure.in (sim_target): Build PowerPC simulator for powerpc
1083         System V.4, Solaris, and Elf targets.
1084         * configure: Regenerate with autoconf 2.10.
1085
1086 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1087
1088         * configure.in: Only built erc32 simulator on Unix hosts as it
1089         uses pseudo ttys.
1090         * configure: Regenerated with autoconf 2.8.
1091
1092 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1093
1094         * erc32: Sparc simulator from the ESA.
1095
1096 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1097
1098         From: Miles Bader  <miles@gnu.ai.mit.edu>
1099         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1100         * configure: Regenerate using autoconf.
1101
1102 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1103
1104         * Makefile.in (install): Fix typo.
1105
1106 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1107
1108         * configure: Regenerate with autoconf 2.7.
1109
1110         * Makefile.in (all): Simplify.
1111         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1112         as in the all target.
1113         (distclean, maintainer-clean, realclean): Likewise.
1114         (install): Likewise.
1115
1116 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1117
1118         * Makefile.in (all): Remove extra '\' char from shell script.
1119
1120 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1121
1122         * Makefile.in (all): Avoid a for loop with zero elements, even if
1123         the loop will not be executed because of an if statement.
1124
1125 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1126
1127         * Makefile.in (install): Add missing semicolon in "fi \".
1128
1129 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1130
1131         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1132         defaults from configure.
1133
1134         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1135         configure defaults.
1136         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1137         if either --enable-sim-powerpc is used, or the host compiler is
1138         GCC.
1139
1140 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1141
1142         * configure.in (mips*-*-*): Added "mips" simulator target.
1143         * configure: Re-generated.
1144
1145 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1146
1147         * Makefile.in (BISON): Remove macro.
1148         (FLAGS_TO_PASS): Remove BISON.
1149
1150 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1151
1152         * configure.in:  Explicitly `exit 0' for broken shells.
1153         * configure:  Rebuilt.
1154
1155 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1156
1157         * common/run.c (main): Initialize the callbacks.
1158
1159 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1160
1161         * Makefile.in (maintainer-clean): New synonym for realclean.
1162
1163 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1164
1165         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1166         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1167
1168 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1169
1170         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1171         <cagney@highland.com.au>.
1172         * configure: Regnerate from configure.in.
1173
1174 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1175
1176         * Update all FSF addresses except those in COPYING* files.
1177
1178 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1179
1180         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1181         submakes either default or passed in value.
1182
1183 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1184
1185         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1186           install): Changed targets so that they descend all
1187           subdirectories in $(SUBDIRS).
1188           (*-all, *-clean, *-install): Removed targets.
1189
1190         * configure.in: Don't bother with target makefile fragments, they
1191           are no longer needed.
1192         * configure: regenerated.
1193
1194         * Makefile.in, configure.in: converted to autoconf.
1195         * configure: New file, generated with autconf 2.4.
1196
1197 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1198
1199         * Makefile.in: Support ARM.
1200         * configure.in: Ditto.
1201
1202 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1203
1204         * Makefile.in: Support W65.
1205         * configure.in: Ditto.
1206
1207 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1208
1209         * Makefile.in: Add TAGS target.
1210
1211 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1212
1213         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1214           install-h8300, clean-h8300, all-h8500, install-h8500,
1215           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1216           recursion lines.
1217
1218 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1219
1220         * Makefile.in: remove endian.h trace from h8500
1221
1222 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1223
1224         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1225
1226 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1227
1228         * Makefile.in: make all of the all-* target (except all-nothing)
1229         depend on endian.h, so that if we're not building a simulator, we
1230         don't built endian
1231
1232 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1233
1234         * Makefile.in (check, installcheck): Added dummy targets.
1235
1236 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1237
1238         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1239         explicitly make it, since some makes apparently don't work with
1240         VPATH and .c to executable rules (SunOS make for example).
1241
1242 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1243
1244         * Makefile.in (endian): Add explicit rule for broken makes.
1245
1246 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1247
1248         * Makefile.in (info, install-info): New targets.
1249         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1250         level Makefile.
1251
1252 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1253
1254         * Makefile.in (endian.h): build endian.h via a temporary file so
1255           that we don't leave an incomplete file lying around on
1256           interrupted builds.
1257           (clean): remove endian, e.h, and endian.h.
1258
1259 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1260
1261         * Makefile.in, configure.in: if target isn't supported, build a
1262         harmless makefile.
1263
1264